Versija:
12.1.11 (2012-02-20)
Copyright © 2012 Novell, Inc.
Leidžiama kopijuoti, platinti ir/arba keisti šį dokumentą GNU laisvosios dokumentacijos licencijos, 1.2 ar bet kurios vėlesnės versijos, paskelbtos Laisvos Programinės Įrangos Fondo (Free Software Foundation), sąlygomis; jokių pakeistų skyrių, jokių tekstų priekyje ir jokių tekstų gale. Licencijos kopija įtraukta kaip rinkmena fdl.txt.
Jei senesnę sistemos versiją naujovinote iki šios openSUSE laidos, ankstesnių laidos informacijų ieškokite čia: http://en.opensuse.org/openSUSE:Release_Notes
Laidos pastabos aprėpia šias sritis:
Įvairenybės: Šie įrašai įterpti automatiškai iš pageidaujamų savybių tvarkymo sistemos „openFATE“ (http://features.opensuse.org).
Kol kas elementai nesurūšiuoti — vis dar tobulinama.
Diegimas: skaitykite, jei ketinate diegti nuo nulio.
Bendra: informacija, kurią visi turėtų perskaityti.
Sistemos naujovinimas: klausimai, susiję su ankstesnės versijos naujovinimu iki šios openSUSE versijos.
Techninės detalės: šioje dalyje techniniai pakeitimai ir patobulinimai, skirti patyrusiam naudotojui.
https://features.opensuse.org/305278 FATE kategorijos: AppArmor, YaST.
AppArmor konfigūracijos modulį nuo šiol rasite YaST valdymo centro modulių grupėje „Saugumas ir naudotojai“.
For detailed installation information, see the "openSUSE Documentation" referenced below.
In Start-Up, find step-by-step installation instructions, as well as introductions to the KDE and Gnome desktops and to the LibreOffice suite. Also covered are basic administration topics such as deployment and software management and an introduction to the bash shell.
Reference covers administration, and system configuration in detail and explains how to set up various network services.
Saugumo vadove supažindina su pagrindinėmis sistemos saugumo koncepcijomis, apimančias tiek vietinio, tiek tinklo saugumo aspektus.
Sistemos analizavimo ir derinimo vadovas padeda aptikti problemas, rasti sprendimus, optimizuoti darbą.
Virtualization with KVM offers an introduction to setting up and managing virtualization with KVM, libvirt and QEMU tools.
Siūlomas GNOME 3 darbalaukis skiriasi nuo GNOME 2. Tad tam, kad naudotojai pasinaudotų naujovėmis, nebus automatiškai migruojama iš GNOME 2 darbalaukio. GNOME 3 konfigūruokite per Sistemos nuostatas arba pasinaudoję sudėtingesniu įrankiu (gnome-tweak-tool).
The standard mode of GNOME 3 requires support for 3D acceleration in the graphic drivers. When 3D acceleration is not available, GNOME 3 then uses the fallback mode. If it turns out that GNOME 3 detects availability of 3D acceleration, but the standard mode is unusable, then you likely hit a bug in the graphic drivers. You can force the fallback mode with the "gnome.fallback=1" argument on the boot line in grub.
If you use the fallback mode, you can customize the panels by pressing Alt when right-clicking on a panel.
Trumpą GNOME apvalkalo savybių aprašą (klavišų kombinacijas, vilkimo galimybes, specialias paslaugų programas) rasite https://live.gnome.org/GnomeShell/CheatSheet.
PulseAudio garso sistema dabar integruota į sistemą ir įjungiama diegiant naujai. Jei šią sistemą uždraudėte ankstesnėje versijoje, tačiau norite ją įjungti dabar, /etc/sysconfig/sound rinkmenoje keiskite PULSEAUDIO_ENABLE kintamojo reikšmę:
Norėdami visur priverstinai naudoti PA, ties PULSEAUDIO_ENABLE įrašykite "yes". Ties PULSEAUDIO_ENABLE nurodę "no", visiškai uždrausite PulseAudio. Nurodę "custom", išlaikysite savitą konfigūraciją.
Btrfs is the next generation filesystem for Linux. As a preview of the new technology, you can create btrfs partitions or setup your whole system with btrfs.
Note: The btrfs filesystem is in active development, and check and repair functionality ("scrub") has been added just recently. "Scrub" is aimed to verify data and metadata assuming the tree structures are fine; it can (and should) be run periodically on a mounted filesystem: it runs as a background process during normal operation.
Thus we advice to carefully consider, which data to put on the filesystem, and follow the usual suggestions for redundancy and backup. For more information, see http://btrfs.wiki.kernel.org.
Btrfs contains many interesting new features, including the ability to take snapshots of your filesystem. Snapshot and rollback is supported by snapper, and already integrated into openSUSE package and system management tools such as zypper and YaST.
The SUSE KDM theme does not allow Windows Domain logons.
To work around this issue, set DISPLAYMANAGER_KDM_THEME to an empty string in /etc/sysconfig/displaymanager to use the default KDM theme:
DISPLAYMANAGER_KDM_THEME=""
java-1_6_0-sun paketas nebėra openSUSE dalis dėl pasikeitusių licencijos sąlygų. Todėl vietoj jo pateikiamas OpenJDK. openSUSE naudotojai, norintys vietoj openSUSE OpenJDK naudoti Oracle JDK versiją, ją gali parsisiųsti iš http://oracle.com/java.
On ancient SUSE systems, /etc/cryptotab was used for setting up devices with the now deprecated cryptoloop technology. 12.1 only supports /etc/crypttab (without 'o'!), which uses dm-crypt. Users who still have a cryptotab from the old days should run convert_cryptotab, which prints instructions about what to put in crypttab and fstab instead.
If encrypted partitions are not automatically mounted when using systemd, the noauto flag in /etc/fstab for these partitions could be the cause. Replacing this flag with nofail will fix it. For instance, change the following line:
/dev/mapper/cr_sda3 /home ext4 acl,user_xattr,noauto 0 2
į
/dev/mapper/cr_sda3 /home ext4 acl,user_xattr,nofail 0 2
Nuo openSUSE 11.3 pereita prie KMS (branduolio veiksenos parinktis) Intel, ATI ir NVIDIA vaido plokštėms kaip numatytąja parinktimi. Jei kils nesklandumų naudojant KMS tvarkyklių palaikymą (intel, radeon, nouveau), uždrauskite KMS pridėdami nomodeset prie branduolio įkrovos komandinės eilutės. Norėdami, kad parinkties pakeitimas būtų ilgalaikis, pridėkite ją prie branduolio komandinės eilutės rinkmenoje /boot/grub/menu.lst. Tokia parinktis užtikrins, kad atitinkamas branduolio modulis (intel, radeon, nouveau) bus paleistas su parametru modeset=0 ties initrd, t. y. KMS bus uždraustas.
Retais atvejais įkeliant DRM modulį iš initrd gali kilti nesklandumų, nesusijusių su KMS, tad galima visiškai uždrausti DRM modulio įkėlimą iš initrd. Tai galite padaryti nurodydami NO_KMS_IN_INITRD sysconfig kintamojo reikšmę yes per YAST, kuris po to iš naujo sukurs initrd. Perkraukite kompiuterį.
Intel be KMS plokštėse Xserver gali naudoti fbdev tvarkyklę (tik intel tvarkyklė palaiko KMS). Tačiau taip pat yra ir „intellegacy“ tvarkyklė (xorg-x11-driver-video-intel-legacy pakete) senoms Intel vaizdo plokštėms, kuri vis dar palaiko UMS (naudotojo veiksenos parinktį). Norėdami ją naudoti, /etc/X11/xorg.conf.d/50-device.conf rinkmenoje tuščią tvarkyklės (angl. driver) įrašą pakeiskite į intellegacy.
ATI plokštėms šiuolaikiniuose kompiuteriuose tiks radeonhd. NVIDIA be KMS plokštėse turėtų būti naudojama nv tvarkyklė (tik nouveau tvarkyklė palaiko KMS). Atminkite, jei branduolio įkėlimo parinktyse nurodysite nomodeset, sistemose su naujesnėmis ATI ir NVIDIA vaizdo plokštėmis bus naudojama fbdev tvarkyklė.
Due to problems on some hardware HDMI sound output has been disabled by default on the radeon driver, which is the default driver for AMD/ATI graphics cards.
It can be re-enabled by adding radeon.audio=1 as a kernel parameter. In YaST, go to System -> Boot Loader, then click Edit on the default entry, and add the following to the end of 'Optional Kernel Command Line Parameter':
radeon.audio=1
Then reboot to apply the change.
Alternatively, users can install the proprietary driver from AMD. For more information, see http://en.opensuse.org/SDB:ATI_drivers.
By default, openSUSE now boots using systemd. In case of trouble, you can switch back to the old way using sysvinit by pressing the F5 key on the boot.
If you want to switch to sysvinit permanently, install the sysvinit-init package. To switch back to systemd, reinstall the systemd-sysvinit package.
systemctl only supports "standard" parameters (see http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities).
You can bypass this new behavior by calling the start-up script directly, for example:
cd /etc/init.d ./apache2 <your_parameters>
Norėdami sustabdyti ir išjungti sistemą su systemd, komandinėje eilutėje įvykdykite halt -p arba shutdown -h now; arba darbalaukio aplinkoje nuspauskite atitinkamą mygtuką.
Pastaba: halt komanda sistemos tinkamai neišjungtų.
systemd mounts several directories that are meant to contain volatile data only, as tmpfs filesystems: /run, /var/run, /var/lock, and /media are those directories. For background information, see http://lwn.net/Articles/436012/.
Note: Do not store files that are meant to survive a reboot, in /run, /var/run, etc.
systemd maintains directories as specified in the tmpfiles.d directories and in /lib/systemd/system/systemd-tmpfiles-clean.timer. For more information, see the tmpfiles.d manpage.
By default, systemd cleans tmp directories daily as configured in /usr/lib/tmpfiles.d/tmp.conf:
d /tmp 1777 root root 10d d /var/tmp 1777 root root 30d
Note: systemd does not honor sysconfig variables in /etc/sysconfig/cron such as TMP_DIRS_TO_CLEAR.
CUPS 1.5 turi pakeitimų, nesuderinamų su ankstesnėmis versijomis:
CUPS nebepalaiko ~/.cupsrc ir ~/.lpoptions konfigūracijos rinkmenų, naudotų CUPS 1.1 versijoje. Vietoj jų naudokite ~/.cups/client.conf ir ~/.cups/lpoptions, kurios įvestos nuo CUPS 1.2 versijos.
Planuoklė dėl saugumo sumetimų dabar reikalauja, kad filtrai ir varikliai neturėtų grupės rašymo leidimų. Jei naudojate gamintojo pateikimas trečiųjų šalių spausdintuvų tvarkykles, kurios turi laisvesnius leidimus, tuomet leidimus pakeiskite rankiniu būdu.
Pagal GNU programavimo standartus, pervadinimo komanda „rename“ visas eilutes, prasidedančias brūkšniu, interpretuoja kaip komandinės eilutės parinktis. Jei norite to išvengti, parinktį nuo kitų argumentų atskirkite naudodami --. Pavyzdžiui:
#!/bin/bash for f in *.jpg ; do rename -- ".jpg" "-$RANDOM.jpg" $f ; done
cnetworkmanager is no longer available—use nmcli instead. For migration information, see http://repo.or.cz/w/cnetworkmanager.git/blob_plain/HEAD:/nmcli-migration.html.
Unprivileged users can no longer write to /usr/src/packages. rpmbuild now uses ~/rpmbuild by default. To change the directory add a line as follows to ~/.rpmmacros:
%_topdir /some/where/else
To use the subdirectory foo of $HOME add to ~/.rpmmacros:
%_topdir %{getenv:HOME}/foo