=Ver: 2.0
##----------------------------------------
=Pkg: acroread 9.4.7 0.2.2.1 i586
=Sum: Adobe Reader pro PDF soubory
+Des:
<!-- DT:Rich -->
<p>Acroread is a well known PDF viewer.
</p><p>
Adobe Reader is often the only program able to process complicated PDF files, such as PDF forms. However, there are many bugs where we cannot do
anything about because it is proprietary binary-only software.
</p><p>
Please consider whether it is possible to use free PDF readers like
okular, evince, xpdf, ghostview, ... instead.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This package contains proprietary software.
Please remove the package if you do not accept the Adobe license agreement shown before using it for the first time. The license agreement is stored in the You must remove the package if you do not accept the Adobe license agreement is stored in the /usr/share/doc/packages/acroread/LICREAD.TXT file.
</p>
-Ins:
##----------------------------------------
=Pkg: master-boot-code 1.14 70.11 i586
=Sum: i386 Master Boot Record Code
+Des:
<!-- DT:Rich -->
<p>The i386 master boot code is code that, after copied to the MBR of the
boot disk, loads and starts the boot sector of the active partition.
</p>
-Des:
##----------------------------------------
=Pkg: novell-groupwise-gwclient 8.0.1HP 89145.13 i586
=Sum: Novell GroupWise klient
+Des:
<!-- DT:Rich -->
<p>The GroupWise Cross-Platform client enables GroupWise users to access their mailboxes from Linux and Macintosh workstations.
</p>
-Des:
##----------------------------------------
=Pkg: novell-messenger-client 2.0.4 20080930.5 i586
=Sum: Novell GroupWise messenger klient
+Des:
<!-- DT:Rich -->
<p>Cross platform instant messaging client for connecting to GroupWise Messenger systems.
</p>
-Des:
##----------------------------------------
=Pkg: 844-ksc-pcf 19990207 771.17 noarch
=Sum: Korejské 8x4x4 johab písma
+Des:
<!-- DT:Rich -->
<p>Korejské 8x4x4 johab písma.
</p>
-Des:
##----------------------------------------
=Pkg: AdobeICCProfiles 2.0 66.8 noarch
=Sum: Adobe ICC profily
+Des:
<!-- DT:Rich -->
<p>Spravujte barvy pomocí Adobe ICC profilů.
</p><p>
Adobe chce umožnit kvalitní a konzistentní práci s barvami. Aby to bylo možné, musí být barevné informace sdíleny mezi mnoha lidmi, od původního autora až k vydavateli
</p><p>
Náš archív obsahuje:
</p><p>
4 RGB profily
</p><p>
Adobe RGB (1998)
Apple RGB
ColorMatch RGB
sRGB IEC61966-2.1
</p><p>
10 CMYK profilů
</p><p>
US Web Coated (SWOP) v2
US Web Uncoated v2
US Sheetfed Coated v2
US Sheetfed Uncoated v2
Europe ISO Coated FOGRA27
Euroscale Uncoated v2
Japan Web Coated (Ad)
Japan Color 2001 Coated
Japan Color 2001 Uncoated
Japan Color 2002 Newspaper
</p><p>
</p><p>
Více se o barevných profilech ICC dozvíte na webových stránkách konzorcia Color Consortium na adrese http://www.color.org/.
</p><p>
Více se o správě barev pomocí ICC dozvíte v technických příručkách na webu Adobe.
</p><p>
Systémové požadavky
Jakýkoliv systém správy barev používající ICC profily na systémové nebo aplikační úrovni. 
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Tento balíček může obsahovat proprietární software.
</p><p>
Pokud nepřijmete licenční ujednání Adobe zobrazené před prvním použitím a
dostupné na http://www.adobe.com/support/downloads/iccprofiles/icc_eula_win_dist.html,
musíte balíček odstranit.
</p>
-Ins:
+Eul:
<!-- DT:Rich -->
<p></p><p>
ADOBE SYSTEMS INCORPORATED
</p><p>
COLOR PROFILE LICENSE AGREEMENT
</p><p>
NOTICE TO USER: PLEASE READ THIS CONTRACT CAREFULLY. BY USING ALL OR ANY
PORTION OF THE SOFTWARE YOU ACCEPT ALL THE TERMS AND CONDITIONS OF THIS
AGREEMENT. YOU AGREE THAT THIS AGREEMENT IS ENFORCEABLE LIKE ANY WRITTEN
NEGOTIATED AGREEMENT SIGNED BY YOU. IF YOU DO NOT AGREE WITH THE TERMS OF THIS
AGREEMENT, DO NOT USE THE SOFTWARE.
<ol>
<li>DEFINITIONS. In this Agreement, &quot;Adobe&quot; means Adobe Systems Incorporated, a
Delaware corporation, located at 345 Park Avenue, San Jose, California 95110.
&quot;Software&quot; means the software and related items with which this Agreement is
provided.

</li><li>LICENSE. Subject to the terms of this Agreement, Adobe hereby grants you the
worldwide, nonexclusive, nontransferable, royalty-free license to use,
reproduce, and publicly display the Software. Adobe also grants you the rights
to distribute the Software only (a) as embedded within digital image files and
(b) on a standalone basis. No other distribution of the Software is allowed,
including, without limitation, distribution of the Software when incorporated
into or bundled with any application software. All individual profiles must be
referenced by their ICC Profile description string. You may not modify the
Software. Adobe is under no obligation to provide any support under this
Agreement, including upgrades or future versions of the Software or other
items. No title to the intellectual property in the Software is transferred to
you under the terms of this Agreement. You do not acquire any rights to the
Software except as expressly set forth in this Agreement.

</li><li>DISTRIBUTION. If you choose to distribute the Software, you do so with the
understanding that you agree to defend, indemnify, and hold harmless Adobe
against any losses, damages, or costs arising from any claims, lawsuits, or
other legal actions arising out of such distribution, including without
limitation, your failure to comply with this Section 3. If you distribute the
Software on a standalone basis, you will do so under the terms of this
Agreement or your own license agreement which (a) complies with the terms and
conditions of this Agreement; (b)effectively disclaims all warranties and
conditions, express or implied, on behalf of Adobe; (c)effectively excludes all
liability for damages on behalf of Adobe; (d) substantially states that any
provisions that differ from this Agreement are offered by you alone and not
Adobe; and (e) substantially states that the Software is available from you or
Adobe and informs licensees how to obtain it in a reasonable manner on or
through a medium customarily used for software exchange. Any distributed
Software will include the Adobe copyright notices as included in the Software
provided to you by Adobe.

</li><li>DISCLAIMER OF WARRANTY. Adobe licenses the Software to you on an &quot;AS IS&quot;
basis. Adobe makes no representation as to the adequacy of the Software for any
particular purpose or to produce any particular result. Adobe shall not be
liable for loss or damage arising out of this Agreement or from the
distribution or use of the Software or any other materials. ADOBE AND ITS
SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN
BY USING THE SOFTWARE, EXCEPT FOR ANY WARRANTY,CONDITION, REPRESENTATION, OR
TERM TO THE EXTENT TO WHICH THE SAME CANNOT OR MAY NOT BE EXCLUDED OR LIMITED
BY LAW APPLICABLE TO YOU IN YOUR JURISDICTION. ADOBE AND ITS SUPPLIERS MAKE NO
WARRANTIES, CONDITIONS, REPRESENTATIONS, OR TERMS, EXPRESS OR IMPLIED, WHETHER
BY STATUTE, COMMON LAW, CUSTOM, USAGE, OR OTHERWISE AS TO ANY OTHER MATTERS,
INCLUDING BUT NOT LIMITED TO NONINFRINGEMENT OF THIRD-PARTY RIGHTS,
INTEGRATION, SATISFACTORY QUALITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. YOU
MAY HAVE ADDITIONAL RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. The
provisions of Sections 4 and 5 shall survive the termination of this Agreement,
howsoever caused, but this shall not imply or create any continued right to use
the Software after termination of this Agreement.

</li><li>LIMITATION OF LIABILITY. IN NO EVENT WILL ADOBE OR ITS SUPPLIERS BE LIABLE
TO YOU FOR ANY DAMAGES, CLAIMS, OR COSTS WHATSOEVER OR ANY CONSEQUENTIAL,
INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR LOST SAVINGS, EVEN IF AN
ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, DAMAGES,
CLAIMS, OR COSTS OR FOR ANY CLAIM BY ANY THIRD PARTY. THE FOREGOING LIMITATIONS
AND EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR
JURISDICTION. ADOBE&#39;S AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS UNDER OR IN
CONNECTION WITH THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT PAID FOR THE
SOFTWARE. Nothing contained in this Agreement limits Adobe&#39;s liability to you
in the event of death or personal injury resulting from Adobe&#39;s negligence or
for the tort of deceit (fraud). Adobe is acting on behalf of its suppliers for
the purpose of disclaiming, excluding, and/or limiting obligations, warranties,
and liability as provided in this Agreement, but in no other respects and for
no other purpose.

</li><li>TRADEMARKS. Adobe grants you a worldwide, nonexclusive, nontransferable,
personal right to use the &quot;Adobe&quot; word trademark (the &quot;Trademark&quot;) solely to
identify Adobe as the source of the Adobe RGB (1998) product or Adobe RGB
technology, so long as such use complies with the terms of this Agreement, the
trademark guidelines available at the &quot;Permissions and trademarks&quot; pages of the
Adobe website (www.adobe.com), and the &quot;Adobe Trademark Guidelines for third
parties who license, use or refer to Adobe trademarks,&quot; also available from the
Adobe website. You acknowledge the validity of the Trademark and Adobe&#39;s
ownership of the Trademark. Nothing in this Agreement shall give you any right,
title, or interest in the Trademark, other than the license rights granted in
this Agreement. You recognize the value of the goodwill associated with the
Trademark and acknowledge that such goodwill exclusively inures to the benefit
of and belongs to Adobe. Adobe and the Adobe logo are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries. With the exception of referential use and the rights
granted in this Agreement, you will not use such trademarks or any other Adobe
trademark or logo without separate prior written permission granted by Adobe.

</li><li>TERM. This Agreement is effective until terminated. Adobe has the right to
terminate this Agreement immediately if you fail to comply with any term
hereof. Upon any such termination, you must return to Adobe all full and
partial copies of the Software in your possession or control.

</li><li>GOVERNMENT REGULATIONS. If any part of the Software is identified as an
export-controlled item under the United States Export Administration Act or any
other export law, restriction, or regulation (the &quot;Export Laws&quot;), you represent
and warrant that you are not a citizen, or otherwise located within, an
embargoed nation (including without limitation Iran, Iraq, Syria, Sudan, Libya,
Cuba, North Korea, and Serbia) and that you are not otherwise prohibited under
the Export Laws from receiving the Software. All rights to use the Software are
granted on condition that such rights are forfeited if you fail to comply with
the terms of this Agreement.

</li><li>GOVERNING LAW. This Agreement will be governed by and construed in
accordance with the substantive laws in force in the State of California as
such laws are applied to agreements entered into and to be performed entirely
within California between California residents. This Agreement will not be
governed by the conflict of law rules of any jurisdiction or the United Nations
Convention on Contracts for the International Sale of Goods, the application of
which is expressly excluded. All disputes arising out of, under, or related to
this Agreement will be brought exclusively in the state Santa Clara County,
California, USA.

</li><li>GENERAL. You may not assign your rights or obligations granted under this
Agreement without the prior written consent of Adobe. None of the provisions of
this Agreement shall be deemed to have been waived by any act or acquiescence
on the part of Adobe, its agents, or employees, but only by an instrument in
writing signed by an authorized signatory of Adobe. When conflicting language
exists between this Agreement and any other agreement included in the Software,
the terms of such included agreement shall apply. If either you or Adobe
employs attorneys to enforce any rights arising out of or relating to this
Agreement, the prevailing party shall be entitled to recover reasonable
attorneys&#39; fees. You acknowledge that you have read this Agreement, understand
it, and that it is the complete and exclusive statement of your agreement with
Adobe which supersedes any prior agreement, oral or written, between Adobe and
you with respect to the licensing to you of the Software. No variation of the
terms of this Agreement will be enforceable against Adobe unless Adobe gives
its express consent, in writing, signed by an authorized signatory of Adobe.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: CID-keyed-fonts-MOE 20021114 338.22 noarch
=Sum: Font MOE v kódování CID (pro tradiční čínštinu)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje fonty v kódování CID
</p><p>
MOESung-Regular           (Adobe-CNS1-0 podsada: 13699 CID)
MOEKai-Regular            (Adobe-CNS1-0 podsada: 13699 CID)
</p><p>
Fonty užitečné pro tradiční čínštinu, tj. pro Taiwan a Hongkong.
Fonty lze používát s Ghostscriptem i s XFree86 &gt;= 4.0.
</p>
-Des:
##----------------------------------------
=Pkg: CID-keyed-fonts-Munhwa 20021114 338.22 noarch
=Sum: Munhwa CID - Korejské fonty
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje CID písma
</p><p>
</p><p>
Munhwa-Regular            (Adobe-Korea1-0 subset: 8193 CIDs)
Munhwa-Bold               (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaGothic-Regular      (Adobe-Korea1-0 subset: 8193 CIDs)
MunhwaGothic-Bold         (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaGungSeo-Bold        (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaGungSeo-Light       (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaGungSeoHeulim-Bold  (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaGungSeoHeulim-Light (Adobe-Korea1-0 subset: 2549 CIDs)
MunhwaHoonMin-Regular     (Adobe-Korea1-0 subset: 2549 CIDs)
</p><p>
</p><p>
Písma jsou určena pro korejštinu.
Lze je použít s Ghostscriptem stejně jako s XFree86 &gt;= 4.0.
</p>
-Des:
##----------------------------------------
=Pkg: CID-keyed-fonts-Wada 20021114 338.22 noarch
=Sum: Wadalab fonty v kódování CID (pro japonštinu)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje fonty v kódování CID
</p><p>
WadaMin-Regular           (Adobe-Japan1-1 podsada: 6998 CID)
WadaMin-Bold              (Adobe-Japan1-1 podsada: 6996 CID)
WadaGo-Bold               (Adobe-Japan1-1 podsada: 6998 CID)
WadaMaruGo-Regular        (Adobe-Japan1-1 podsada: 6998 CID)
</p><p>
Fonty jsou určeny pro japonštinu.
Fonty lze používat s Ghostscriptem i s XFree86 &gt;= 4.0.
</p>
-Des:
##----------------------------------------
=Pkg: CID-keyed-fonts-WadaH 20021114 338.22 noarch
=Sum: Wadalab fonty v kódování CID (pro málo používané japonské znaky)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje fonty v kódování CID
</p><p>
</p><p>
WadaMin-RegularH          (Adobe-Japan2-0 kompletní: 6068 CID)
WadaMaruGo-RegularH       (Adobe-Japan2-0 kompletní: 6068 CID)
</p><p>
</p><p>
Tyto fonty obsahují znaky ze znakové sady JIS X 0121-1990
(další, řídce používané japonské znaky).
Fonty lze používat s Ghostscriptem i s X11.
</p>
-Des:
##----------------------------------------
=Pkg: Crystalcursors 0.5 40.12 noarch
=Sum: Kurzory ve stylu Crystal
+Des:
<!-- DT:Rich -->
<p>Čtyři různé sady stylů kurzorů z KDE CrystalSVG.
Bílá, šedá, modrá a zelená verze.Nastavit je můžete v Ovládacím centru KDE, nastavení myši.
</p>
-Des:
##----------------------------------------
=Pkg: FZFangSong 0.20040419 1.17 noarch
=Sum: Simplified Chinese TrueType font "FZFangSong"
+Des:
<!-- DT:Rich -->
<p>Simplified Chinese TrueType font &quot;FZFangSong&quot; made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: FZHeiTi 0.20040419 1.17 noarch
=Sum: Simplified Chinese TrueType font "FZHeiTi"
+Des:
<!-- DT:Rich -->
<p>Simplified Chinese TrueType font &quot;FZHeiTi&quot; made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: FZKaiTi 0.20040419 1.17 noarch
=Sum: Simplified Chinese TrueType font "FZKaiTi"
+Des:
<!-- DT:Rich -->
<p>Simplified Chinese TrueType font &quot;FZKaiTi&quot; made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: FZKaiTiB 0.20040419 1.17 noarch
=Sum: Traditional Chinese TrueType font "FZKaiTiB"
+Des:
<!-- DT:Rich -->
<p>Traditional Chinese TrueType font &quot;FZKaiTiB &quot;made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: FZMingTiB 0.20040419 1.17 noarch
=Sum: Traditional Chinese TrueType font "FZMingTiB"
+Des:
<!-- DT:Rich -->
<p>Traditional Chinese TrueType font &quot;FZMingTiB&quot; made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: FZSongTi 0.20040419 1.17 noarch
=Sum: Simplified Chinese TrueType font "FZSongTi"
+Des:
<!-- DT:Rich -->
<p>Simplified Chinese TrueType font &quot;FZSongTi&quot; made by Beijing Founder Electronics.
</p>
-Des:
##----------------------------------------
=Pkg: IPAGothic 002.003 10.9 noarch
=Sum: "Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>&quot;Gothic&quot; Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>###############################################################################
IMPORTANT NOTICE
</p><p>
The following english license text is an inofficial translation of the original
japanese IPA End User License Agreement. It has been provided purely for
informational purposes and it should not be relied upon. The japanese license
text is the official text.
###############################################################################
</p><p>
</p><p>
IPA Font License Agreement for General User (End User License)
</p><p>
Information-Technology Promotion Agency ( hereinafter called &quot;IPA&quot;) grant the
license of Digital Font Program called &quot;IPA Font&quot; ( hereinafter called
&quot;Licensed Program&quot; ) under the following terms and conditions ( hereinafter
called &quot;This Agreement&quot; ). In the case that the party receiving Licensed
Program ( whether directly or indirectly, any party receiving Licensed Program
is hereinafter called &quot;Recipient&quot; ) installs Licensed Program onto Computer
( defined in Section 1 below ), Recipient is deemed to accept and agree to
This Agreement.
</p><p>
Section 1. Definition
The  following words in This Agreement are defined in each paragraph in this
Section.<ol>
<li>&quot;Revised Program&quot; means the program which (a) all or part of Licensed
Program is changed, modified, added or deleted,  (b) the font information
like the font name, a series of tables including the font information like a
font name or the information for the combination of the characters is changed
or revised, or (c) all of a part of font&#39;s outline or bitmap data is changed,
modified, added or deleted.
</li><li>&quot;Independent Program&quot; means the digital font program or other derivative
work newly created in the manner of not using all or a part of  Licensed
Program in as is basis but taking out the character&#39;s information from all or
a part of Licensed Program or modifying such character&#39;s information.
</li><li>&quot;Digital Contents&quot; means the products provided to the end user in the form
of  digital data, which  include picture contents ( picture products and
programs like motion, still and other picture displayed on the monitor or
screen ) and products including the character text, picture, drawing and so
on.
</li><li>&quot;Digital Document File&quot; means the document file, which is created by
software like PDF and so on and embeds a part of the Licensed Program as it&#39;s
character.
</li><li>&quot;Change&quot; means to change the framework of the font, which includes creating
new characters by separating a part of Chinese (Kanji) characters from it&#39;s
Chinese ( Kanji ) characters,       transforming a part of the characters or
other ways.
</li><li>&quot;Modification of Design&quot; means to make some display&#39;s effect or
transformation to the font without any change of  the font&#39;s framework, which
includes the character&#39;s decoration in the application software (bold, shadow,
underline and so on) or change of the character&#39;s shape.
</li><li>&quot;Computer&quot; includes Server in this Agreement.
</li><li>&quot;Copy and Other Use&quot; means copy, transfer, distribution, rental, public
transmission and showing on the screen.
</li></ol>
Section 2. Grant of the License
IPA grants a worldwide license to use Licensed Program to Recipient under the
terms and conditions of this Agreement, provided that IPA always hold all of
titles for Licensed Program. This Agreement shall not be meant to transfer any
title for Licensed Program, trademarks, tradenames, and/or servicemarks owned
by IPA in any manner.<ol>
<li>Recipient can install Licensed Program into the memory device and use it on
Computer having the memory device.
</li><li>Recipient can use Licensed Program installed onto Computer for showing the
characters on the printing matters or the Digital Contents without any change
or modification.
</li><li>Recipient can use Licensed Program installed onto Computer which Recipient
changed or modified through some editors or compilers for showing the
characters on printing matter or the Digital Contents.
</li><li>Recipient can use the printing matter and Digital Contents developed under
sub-paragraph 2 and 3 of this Section above and it&#39;s copy and/or copies by
broadcasting, telecommunication and other kind of media in commercial and
non-commercial basis.
</li><li>Recipient can use Digital Document File and it&#39;s copy and/or copies into
which the characters used in the Digital Contents are embedded under this
Agreement. In this case, Recipient doesn&#39;t have any obligation to require the
recipient getting the Digital Document File to agree to this Agreement.
</li><li>Recipient can distribute unmodified copies of the Licensed Program  under
the name of &quot;IPA Font&quot;to the third party(s) on a commercial and/or
noncommercial basis. In this case, Recipient has to distribute the Licensed
Program with a copy of this Agreement.
</li><li>Recipient can use Revised Program and/or Independent Program only for
personal use or for  research or study.
</li></ol>
Section 3. Limitation of Use<ol>
<li>Recipient can not distribute Revised Program nor Independent Program
commercially or non commercially without IPA&#39;s agreement.
</li><li>In the case that Recipient distributes IPA Font under subparagraph 6 in
Section 2 of this Agreement, Recipient can not change the name of &quot;IPA Font&quot;.
</li><li>IPA doesn&#39;t have any warranty nor any liability for Revised Program and
Independent Program.
</li><li>IPA has no liability for any damages of Recipient arisen from the use of
Licensed Program, Revised Program or Independent Program (including the
recovering cost, loss of data, use, profit or any other property, and other
direct, indirect, special or incidental damages and any other damages.).
</li><li>IPA will not have any responsibility or liability for any warranty or
support for Licensed Program, Revised Program or Independent Program.
</li></ol>
Section 4. Term and Termination<ol>
<li>This Agreement is in effect from the execution of this Agreement to the
uninstallation of  all of Licensed Program from all of Computer.
</li><li>Notwithstanding of paragraph 1 of this Section above, in the case that
Recipient violates any clause of this Agreement, this Agreement will be
automatically terminated, and Recipient can not use Licensed Program, Revised
program nor Independent Program after the termination.
</li></ol>
Furthermore, Recipient has to be liable for IPA&#39;s damages arising from the
violation.
</p><p>
Section 5. Governing Law<ol>
<li>IPA can change any of the clauses of this agreement at any time. Pursuant
to any such change, Recipient can choose to follow either the original clause
or the clause after change. All stipulations of copyright law and other
related laws will be applied to this Agreement excluding the clauses of this
Agreement
</li><li>This Agreement is governed by the Laws of Japan.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: IPAMincho 002.003 10.9 noarch
=Sum: "Mincho" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>&quot;Mincho&quot; Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>###############################################################################
IMPORTANT NOTICE
</p><p>
The following english license text is an inofficial translation of the original
japanese IPA End User License Agreement. It has been provided purely for
informational purposes and it should not be relied upon. The japanese license
text is the official text.
###############################################################################
</p><p>
</p><p>
IPA Font License Agreement for General User (End User License)
</p><p>
Information-Technology Promotion Agency ( hereinafter called &quot;IPA&quot;) grant the
license of Digital Font Program called &quot;IPA Font&quot; ( hereinafter called
&quot;Licensed Program&quot; ) under the following terms and conditions ( hereinafter
called &quot;This Agreement&quot; ). In the case that the party receiving Licensed
Program ( whether directly or indirectly, any party receiving Licensed Program
is hereinafter called &quot;Recipient&quot; ) installs Licensed Program onto Computer
( defined in Section 1 below ), Recipient is deemed to accept and agree to
This Agreement.
</p><p>
Section 1. Definition
The  following words in This Agreement are defined in each paragraph in this
Section.<ol>
<li>&quot;Revised Program&quot; means the program which (a) all or part of Licensed
Program is changed, modified, added or deleted,  (b) the font information
like the font name, a series of tables including the font information like a
font name or the information for the combination of the characters is changed
or revised, or (c) all of a part of font&#39;s outline or bitmap data is changed,
modified, added or deleted.
</li><li>&quot;Independent Program&quot; means the digital font program or other derivative
work newly created in the manner of not using all or a part of  Licensed
Program in as is basis but taking out the character&#39;s information from all or
a part of Licensed Program or modifying such character&#39;s information.
</li><li>&quot;Digital Contents&quot; means the products provided to the end user in the form
of  digital data, which  include picture contents ( picture products and
programs like motion, still and other picture displayed on the monitor or
screen ) and products including the character text, picture, drawing and so
on.
</li><li>&quot;Digital Document File&quot; means the document file, which is created by
software like PDF and so on and embeds a part of the Licensed Program as it&#39;s
character.
</li><li>&quot;Change&quot; means to change the framework of the font, which includes creating
new characters by separating a part of Chinese (Kanji) characters from it&#39;s
Chinese ( Kanji ) characters,       transforming a part of the characters or
other ways.
</li><li>&quot;Modification of Design&quot; means to make some display&#39;s effect or
transformation to the font without any change of  the font&#39;s framework, which
includes the character&#39;s decoration in the application software (bold, shadow,
underline and so on) or change of the character&#39;s shape.
</li><li>&quot;Computer&quot; includes Server in this Agreement.
</li><li>&quot;Copy and Other Use&quot; means copy, transfer, distribution, rental, public
transmission and showing on the screen.
</li></ol>
Section 2. Grant of the License
IPA grants a worldwide license to use Licensed Program to Recipient under the
terms and conditions of this Agreement, provided that IPA always hold all of
titles for Licensed Program. This Agreement shall not be meant to transfer any
title for Licensed Program, trademarks, tradenames, and/or servicemarks owned
by IPA in any manner.<ol>
<li>Recipient can install Licensed Program into the memory device and use it on
Computer having the memory device.
</li><li>Recipient can use Licensed Program installed onto Computer for showing the
characters on the printing matters or the Digital Contents without any change
or modification.
</li><li>Recipient can use Licensed Program installed onto Computer which Recipient
changed or modified through some editors or compilers for showing the
characters on printing matter or the Digital Contents.
</li><li>Recipient can use the printing matter and Digital Contents developed under
sub-paragraph 2 and 3 of this Section above and it&#39;s copy and/or copies by
broadcasting, telecommunication and other kind of media in commercial and
non-commercial basis.
</li><li>Recipient can use Digital Document File and it&#39;s copy and/or copies into
which the characters used in the Digital Contents are embedded under this
Agreement. In this case, Recipient doesn&#39;t have any obligation to require the
recipient getting the Digital Document File to agree to this Agreement.
</li><li>Recipient can distribute unmodified copies of the Licensed Program  under
the name of &quot;IPA Font&quot;to the third party(s) on a commercial and/or
noncommercial basis. In this case, Recipient has to distribute the Licensed
Program with a copy of this Agreement.
</li><li>Recipient can use Revised Program and/or Independent Program only for
personal use or for  research or study.
</li></ol>
Section 3. Limitation of Use<ol>
<li>Recipient can not distribute Revised Program nor Independent Program
commercially or non commercially without IPA&#39;s agreement.
</li><li>In the case that Recipient distributes IPA Font under subparagraph 6 in
Section 2 of this Agreement, Recipient can not change the name of &quot;IPA Font&quot;.
</li><li>IPA doesn&#39;t have any warranty nor any liability for Revised Program and
Independent Program.
</li><li>IPA has no liability for any damages of Recipient arisen from the use of
Licensed Program, Revised Program or Independent Program (including the
recovering cost, loss of data, use, profit or any other property, and other
direct, indirect, special or incidental damages and any other damages.).
</li><li>IPA will not have any responsibility or liability for any warranty or
support for Licensed Program, Revised Program or Independent Program.
</li></ol>
Section 4. Term and Termination<ol>
<li>This Agreement is in effect from the execution of this Agreement to the
uninstallation of  all of Licensed Program from all of Computer.
</li><li>Notwithstanding of paragraph 1 of this Section above, in the case that
Recipient violates any clause of this Agreement, this Agreement will be
automatically terminated, and Recipient can not use Licensed Program, Revised
program nor Independent Program after the termination.
</li></ol>
Furthermore, Recipient has to be liable for IPA&#39;s damages arising from the
violation.
</p><p>
Section 5. Governing Law<ol>
<li>IPA can change any of the clauses of this agreement at any time. Pursuant
to any such change, Recipient can choose to follow either the original clause
or the clause after change. All stipulations of copyright law and other
related laws will be applied to this Agreement excluding the clauses of this
Agreement
</li><li>This Agreement is governed by the Laws of Japan.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: IPAPGothic 002.003 10.9 noarch
=Sum: "Proportional Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>&quot;Proportional Gothic&quot; Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>###############################################################################
IMPORTANT NOTICE
</p><p>
The following english license text is an inofficial translation of the original
japanese IPA End User License Agreement. It has been provided purely for
informational purposes and it should not be relied upon. The japanese license
text is the official text.
###############################################################################
</p><p>
</p><p>
IPA Font License Agreement for General User (End User License)
</p><p>
Information-Technology Promotion Agency ( hereinafter called &quot;IPA&quot;) grant the
license of Digital Font Program called &quot;IPA Font&quot; ( hereinafter called
&quot;Licensed Program&quot; ) under the following terms and conditions ( hereinafter
called &quot;This Agreement&quot; ). In the case that the party receiving Licensed
Program ( whether directly or indirectly, any party receiving Licensed Program
is hereinafter called &quot;Recipient&quot; ) installs Licensed Program onto Computer
( defined in Section 1 below ), Recipient is deemed to accept and agree to
This Agreement.
</p><p>
Section 1. Definition
The  following words in This Agreement are defined in each paragraph in this
Section.<ol>
<li>&quot;Revised Program&quot; means the program which (a) all or part of Licensed
Program is changed, modified, added or deleted,  (b) the font information
like the font name, a series of tables including the font information like a
font name or the information for the combination of the characters is changed
or revised, or (c) all of a part of font&#39;s outline or bitmap data is changed,
modified, added or deleted.
</li><li>&quot;Independent Program&quot; means the digital font program or other derivative
work newly created in the manner of not using all or a part of  Licensed
Program in as is basis but taking out the character&#39;s information from all or
a part of Licensed Program or modifying such character&#39;s information.
</li><li>&quot;Digital Contents&quot; means the products provided to the end user in the form
of  digital data, which  include picture contents ( picture products and
programs like motion, still and other picture displayed on the monitor or
screen ) and products including the character text, picture, drawing and so
on.
</li><li>&quot;Digital Document File&quot; means the document file, which is created by
software like PDF and so on and embeds a part of the Licensed Program as it&#39;s
character.
</li><li>&quot;Change&quot; means to change the framework of the font, which includes creating
new characters by separating a part of Chinese (Kanji) characters from it&#39;s
Chinese ( Kanji ) characters,       transforming a part of the characters or
other ways.
</li><li>&quot;Modification of Design&quot; means to make some display&#39;s effect or
transformation to the font without any change of  the font&#39;s framework, which
includes the character&#39;s decoration in the application software (bold, shadow,
underline and so on) or change of the character&#39;s shape.
</li><li>&quot;Computer&quot; includes Server in this Agreement.
</li><li>&quot;Copy and Other Use&quot; means copy, transfer, distribution, rental, public
transmission and showing on the screen.
</li></ol>
Section 2. Grant of the License
IPA grants a worldwide license to use Licensed Program to Recipient under the
terms and conditions of this Agreement, provided that IPA always hold all of
titles for Licensed Program. This Agreement shall not be meant to transfer any
title for Licensed Program, trademarks, tradenames, and/or servicemarks owned
by IPA in any manner.<ol>
<li>Recipient can install Licensed Program into the memory device and use it on
Computer having the memory device.
</li><li>Recipient can use Licensed Program installed onto Computer for showing the
characters on the printing matters or the Digital Contents without any change
or modification.
</li><li>Recipient can use Licensed Program installed onto Computer which Recipient
changed or modified through some editors or compilers for showing the
characters on printing matter or the Digital Contents.
</li><li>Recipient can use the printing matter and Digital Contents developed under
sub-paragraph 2 and 3 of this Section above and it&#39;s copy and/or copies by
broadcasting, telecommunication and other kind of media in commercial and
non-commercial basis.
</li><li>Recipient can use Digital Document File and it&#39;s copy and/or copies into
which the characters used in the Digital Contents are embedded under this
Agreement. In this case, Recipient doesn&#39;t have any obligation to require the
recipient getting the Digital Document File to agree to this Agreement.
</li><li>Recipient can distribute unmodified copies of the Licensed Program  under
the name of &quot;IPA Font&quot;to the third party(s) on a commercial and/or
noncommercial basis. In this case, Recipient has to distribute the Licensed
Program with a copy of this Agreement.
</li><li>Recipient can use Revised Program and/or Independent Program only for
personal use or for  research or study.
</li></ol>
Section 3. Limitation of Use<ol>
<li>Recipient can not distribute Revised Program nor Independent Program
commercially or non commercially without IPA&#39;s agreement.
</li><li>In the case that Recipient distributes IPA Font under subparagraph 6 in
Section 2 of this Agreement, Recipient can not change the name of &quot;IPA Font&quot;.
</li><li>IPA doesn&#39;t have any warranty nor any liability for Revised Program and
Independent Program.
</li><li>IPA has no liability for any damages of Recipient arisen from the use of
Licensed Program, Revised Program or Independent Program (including the
recovering cost, loss of data, use, profit or any other property, and other
direct, indirect, special or incidental damages and any other damages.).
</li><li>IPA will not have any responsibility or liability for any warranty or
support for Licensed Program, Revised Program or Independent Program.
</li></ol>
Section 4. Term and Termination<ol>
<li>This Agreement is in effect from the execution of this Agreement to the
uninstallation of  all of Licensed Program from all of Computer.
</li><li>Notwithstanding of paragraph 1 of this Section above, in the case that
Recipient violates any clause of this Agreement, this Agreement will be
automatically terminated, and Recipient can not use Licensed Program, Revised
program nor Independent Program after the termination.
</li></ol>
Furthermore, Recipient has to be liable for IPA&#39;s damages arising from the
violation.
</p><p>
Section 5. Governing Law<ol>
<li>IPA can change any of the clauses of this agreement at any time. Pursuant
to any such change, Recipient can choose to follow either the original clause
or the clause after change. All stipulations of copyright law and other
related laws will be applied to this Agreement excluding the clauses of this
Agreement
</li><li>This Agreement is governed by the Laws of Japan.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: IPAPMincho 002.003 10.9 noarch
=Sum: "Proportional Mincho" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>&quot;Proportional Mincho&quot; Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>###############################################################################
IMPORTANT NOTICE
</p><p>
The following english license text is an inofficial translation of the original
japanese IPA End User License Agreement. It has been provided purely for
informational purposes and it should not be relied upon. The japanese license
text is the official text.
###############################################################################
</p><p>
</p><p>
IPA Font License Agreement for General User (End User License)
</p><p>
Information-Technology Promotion Agency ( hereinafter called &quot;IPA&quot;) grant the
license of Digital Font Program called &quot;IPA Font&quot; ( hereinafter called
&quot;Licensed Program&quot; ) under the following terms and conditions ( hereinafter
called &quot;This Agreement&quot; ). In the case that the party receiving Licensed
Program ( whether directly or indirectly, any party receiving Licensed Program
is hereinafter called &quot;Recipient&quot; ) installs Licensed Program onto Computer
( defined in Section 1 below ), Recipient is deemed to accept and agree to
This Agreement.
</p><p>
Section 1. Definition
The  following words in This Agreement are defined in each paragraph in this
Section.<ol>
<li>&quot;Revised Program&quot; means the program which (a) all or part of Licensed
Program is changed, modified, added or deleted,  (b) the font information
like the font name, a series of tables including the font information like a
font name or the information for the combination of the characters is changed
or revised, or (c) all of a part of font&#39;s outline or bitmap data is changed,
modified, added or deleted.
</li><li>&quot;Independent Program&quot; means the digital font program or other derivative
work newly created in the manner of not using all or a part of  Licensed
Program in as is basis but taking out the character&#39;s information from all or
a part of Licensed Program or modifying such character&#39;s information.
</li><li>&quot;Digital Contents&quot; means the products provided to the end user in the form
of  digital data, which  include picture contents ( picture products and
programs like motion, still and other picture displayed on the monitor or
screen ) and products including the character text, picture, drawing and so
on.
</li><li>&quot;Digital Document File&quot; means the document file, which is created by
software like PDF and so on and embeds a part of the Licensed Program as it&#39;s
character.
</li><li>&quot;Change&quot; means to change the framework of the font, which includes creating
new characters by separating a part of Chinese (Kanji) characters from it&#39;s
Chinese ( Kanji ) characters,       transforming a part of the characters or
other ways.
</li><li>&quot;Modification of Design&quot; means to make some display&#39;s effect or
transformation to the font without any change of  the font&#39;s framework, which
includes the character&#39;s decoration in the application software (bold, shadow,
underline and so on) or change of the character&#39;s shape.
</li><li>&quot;Computer&quot; includes Server in this Agreement.
</li><li>&quot;Copy and Other Use&quot; means copy, transfer, distribution, rental, public
transmission and showing on the screen.
</li></ol>
Section 2. Grant of the License
IPA grants a worldwide license to use Licensed Program to Recipient under the
terms and conditions of this Agreement, provided that IPA always hold all of
titles for Licensed Program. This Agreement shall not be meant to transfer any
title for Licensed Program, trademarks, tradenames, and/or servicemarks owned
by IPA in any manner.<ol>
<li>Recipient can install Licensed Program into the memory device and use it on
Computer having the memory device.
</li><li>Recipient can use Licensed Program installed onto Computer for showing the
characters on the printing matters or the Digital Contents without any change
or modification.
</li><li>Recipient can use Licensed Program installed onto Computer which Recipient
changed or modified through some editors or compilers for showing the
characters on printing matter or the Digital Contents.
</li><li>Recipient can use the printing matter and Digital Contents developed under
sub-paragraph 2 and 3 of this Section above and it&#39;s copy and/or copies by
broadcasting, telecommunication and other kind of media in commercial and
non-commercial basis.
</li><li>Recipient can use Digital Document File and it&#39;s copy and/or copies into
which the characters used in the Digital Contents are embedded under this
Agreement. In this case, Recipient doesn&#39;t have any obligation to require the
recipient getting the Digital Document File to agree to this Agreement.
</li><li>Recipient can distribute unmodified copies of the Licensed Program  under
the name of &quot;IPA Font&quot;to the third party(s) on a commercial and/or
noncommercial basis. In this case, Recipient has to distribute the Licensed
Program with a copy of this Agreement.
</li><li>Recipient can use Revised Program and/or Independent Program only for
personal use or for  research or study.
</li></ol>
Section 3. Limitation of Use<ol>
<li>Recipient can not distribute Revised Program nor Independent Program
commercially or non commercially without IPA&#39;s agreement.
</li><li>In the case that Recipient distributes IPA Font under subparagraph 6 in
Section 2 of this Agreement, Recipient can not change the name of &quot;IPA Font&quot;.
</li><li>IPA doesn&#39;t have any warranty nor any liability for Revised Program and
Independent Program.
</li><li>IPA has no liability for any damages of Recipient arisen from the use of
Licensed Program, Revised Program or Independent Program (including the
recovering cost, loss of data, use, profit or any other property, and other
direct, indirect, special or incidental damages and any other damages.).
</li><li>IPA will not have any responsibility or liability for any warranty or
support for Licensed Program, Revised Program or Independent Program.
</li></ol>
Section 4. Term and Termination<ol>
<li>This Agreement is in effect from the execution of this Agreement to the
uninstallation of  all of Licensed Program from all of Computer.
</li><li>Notwithstanding of paragraph 1 of this Section above, in the case that
Recipient violates any clause of this Agreement, this Agreement will be
automatically terminated, and Recipient can not use Licensed Program, Revised
program nor Independent Program after the termination.
</li></ol>
Furthermore, Recipient has to be liable for IPA&#39;s damages arising from the
violation.
</p><p>
Section 5. Governing Law<ol>
<li>IPA can change any of the clauses of this agreement at any time. Pursuant
to any such change, Recipient can choose to follow either the original clause
or the clause after change. All stipulations of copyright law and other
related laws will be applied to this Agreement excluding the clauses of this
Agreement
</li><li>This Agreement is governed by the Laws of Japan.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: IPAUIGothic 002.003 10.9 noarch
=Sum: "UI Gothic" Japanese TrueType font made by IPA
+Des:
<!-- DT:Rich -->
<p>&quot;UI Gothic&quot; Japanese TrueType font made by IPA
(Information-technology Promotion Agency).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>###############################################################################
IMPORTANT NOTICE
</p><p>
The following english license text is an inofficial translation of the original
japanese IPA End User License Agreement. It has been provided purely for
informational purposes and it should not be relied upon. The japanese license
text is the official text.
###############################################################################
</p><p>
</p><p>
IPA Font License Agreement for General User (End User License)
</p><p>
Information-Technology Promotion Agency ( hereinafter called &quot;IPA&quot;) grant the
license of Digital Font Program called &quot;IPA Font&quot; ( hereinafter called
&quot;Licensed Program&quot; ) under the following terms and conditions ( hereinafter
called &quot;This Agreement&quot; ). In the case that the party receiving Licensed
Program ( whether directly or indirectly, any party receiving Licensed Program
is hereinafter called &quot;Recipient&quot; ) installs Licensed Program onto Computer
( defined in Section 1 below ), Recipient is deemed to accept and agree to
This Agreement.
</p><p>
Section 1. Definition
The  following words in This Agreement are defined in each paragraph in this
Section.<ol>
<li>&quot;Revised Program&quot; means the program which (a) all or part of Licensed
Program is changed, modified, added or deleted,  (b) the font information
like the font name, a series of tables including the font information like a
font name or the information for the combination of the characters is changed
or revised, or (c) all of a part of font&#39;s outline or bitmap data is changed,
modified, added or deleted.
</li><li>&quot;Independent Program&quot; means the digital font program or other derivative
work newly created in the manner of not using all or a part of  Licensed
Program in as is basis but taking out the character&#39;s information from all or
a part of Licensed Program or modifying such character&#39;s information.
</li><li>&quot;Digital Contents&quot; means the products provided to the end user in the form
of  digital data, which  include picture contents ( picture products and
programs like motion, still and other picture displayed on the monitor or
screen ) and products including the character text, picture, drawing and so
on.
</li><li>&quot;Digital Document File&quot; means the document file, which is created by
software like PDF and so on and embeds a part of the Licensed Program as it&#39;s
character.
</li><li>&quot;Change&quot; means to change the framework of the font, which includes creating
new characters by separating a part of Chinese (Kanji) characters from it&#39;s
Chinese ( Kanji ) characters,       transforming a part of the characters or
other ways.
</li><li>&quot;Modification of Design&quot; means to make some display&#39;s effect or
transformation to the font without any change of  the font&#39;s framework, which
includes the character&#39;s decoration in the application software (bold, shadow,
underline and so on) or change of the character&#39;s shape.
</li><li>&quot;Computer&quot; includes Server in this Agreement.
</li><li>&quot;Copy and Other Use&quot; means copy, transfer, distribution, rental, public
transmission and showing on the screen.
</li></ol>
Section 2. Grant of the License
IPA grants a worldwide license to use Licensed Program to Recipient under the
terms and conditions of this Agreement, provided that IPA always hold all of
titles for Licensed Program. This Agreement shall not be meant to transfer any
title for Licensed Program, trademarks, tradenames, and/or servicemarks owned
by IPA in any manner.<ol>
<li>Recipient can install Licensed Program into the memory device and use it on
Computer having the memory device.
</li><li>Recipient can use Licensed Program installed onto Computer for showing the
characters on the printing matters or the Digital Contents without any change
or modification.
</li><li>Recipient can use Licensed Program installed onto Computer which Recipient
changed or modified through some editors or compilers for showing the
characters on printing matter or the Digital Contents.
</li><li>Recipient can use the printing matter and Digital Contents developed under
sub-paragraph 2 and 3 of this Section above and it&#39;s copy and/or copies by
broadcasting, telecommunication and other kind of media in commercial and
non-commercial basis.
</li><li>Recipient can use Digital Document File and it&#39;s copy and/or copies into
which the characters used in the Digital Contents are embedded under this
Agreement. In this case, Recipient doesn&#39;t have any obligation to require the
recipient getting the Digital Document File to agree to this Agreement.
</li><li>Recipient can distribute unmodified copies of the Licensed Program  under
the name of &quot;IPA Font&quot;to the third party(s) on a commercial and/or
noncommercial basis. In this case, Recipient has to distribute the Licensed
Program with a copy of this Agreement.
</li><li>Recipient can use Revised Program and/or Independent Program only for
personal use or for  research or study.
</li></ol>
Section 3. Limitation of Use<ol>
<li>Recipient can not distribute Revised Program nor Independent Program
commercially or non commercially without IPA&#39;s agreement.
</li><li>In the case that Recipient distributes IPA Font under subparagraph 6 in
Section 2 of this Agreement, Recipient can not change the name of &quot;IPA Font&quot;.
</li><li>IPA doesn&#39;t have any warranty nor any liability for Revised Program and
Independent Program.
</li><li>IPA has no liability for any damages of Recipient arisen from the use of
Licensed Program, Revised Program or Independent Program (including the
recovering cost, loss of data, use, profit or any other property, and other
direct, indirect, special or incidental damages and any other damages.).
</li><li>IPA will not have any responsibility or liability for any warranty or
support for Licensed Program, Revised Program or Independent Program.
</li></ol>
Section 4. Term and Termination<ol>
<li>This Agreement is in effect from the execution of this Agreement to the
uninstallation of  all of Licensed Program from all of Computer.
</li><li>Notwithstanding of paragraph 1 of this Section above, in the case that
Recipient violates any clause of this Agreement, this Agreement will be
automatically terminated, and Recipient can not use Licensed Program, Revised
program nor Independent Program after the termination.
</li></ol>
Furthermore, Recipient has to be liable for IPA&#39;s damages arising from the
violation.
</p><p>
Section 5. Governing Law<ol>
<li>IPA can change any of the clauses of this agreement at any time. Pursuant
to any such change, Recipient can choose to follow either the original clause
or the clause after change. All stipulations of copyright law and other
related laws will be applied to this Agreement excluding the clauses of this
Agreement
</li><li>This Agreement is governed by the Laws of Japan.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: KhmerOS-fonts 5.0 105.17 noarch
=Sum: Písma pro Khmérštinu
+Des:
<!-- DT:Rich -->
<p>Písma pro Khmérštinu
</p>
-Des:
##----------------------------------------
=Pkg: SuSEfirewall2 3.6_SVNr208 2.5.1 noarch
=Sum: Paketový filtr používající iptables a netfilter
+Des:
<!-- DT:Rich -->
<p>SuSEfirewall2 implements a packet filter that protects hosts and routers by limiting which services or networks are accessible on the host or via the router.
</p><p>
SuSEfirewall2 uses the iptables/netfilter packet filtering infrastructure to create a flexible rule set for a stateful firewall.
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker-themes 0.1 253.8 noarch
=Sum: Témata pro WindowMaker
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje tématapro WindowMaker.
Dokumentace:
</p><p>
/usr/share/doc/packages/wmthemes
</p>
-Des:
##----------------------------------------
=Pkg: a2ps-perl-ja 1.45 1.22 noarch
=Sum: Perlová verze a2ps od Miguela Santany (s podporou pro japonštinu)
+Des:
<!-- DT:Rich -->
<p>Tento program je perlovou verzí a2ps od Miguela Santany (s podporou pro
japonštinu). Rozšíření pro Kanji provedl Naoki Kanazawa
&lt;kanazawa@sra.co.jp&gt;. Podpora B4 a ukončení vět přidal Masami Ueno
&lt;cabbage@kki.esi.yamanashi.ac.jp&gt;.
</p>
-Des:
##----------------------------------------
=Pkg: acroread-cmaps 9.4.6 0.4.2.2 noarch
=Sum: CMap files for acroread
+Des:
<!-- DT:Rich -->
<p>Character Map files for acroread which are needed for Chinese, Japanese and Korean.
</p>
-Des:
##----------------------------------------
=Pkg: acroread-fonts-ja 9.4.6 0.4.2.2 noarch
=Sum: Japanese fonts for acroread
+Des:
<!-- DT:Rich -->
<p>Japanese fonts for acroread
</p>
-Des:
##----------------------------------------
=Pkg: acroread-fonts-ko 9.4.6 0.4.2.2 noarch
=Sum: Korean fonts for acroread
+Des:
<!-- DT:Rich -->
<p>Korean fonts for acroread
</p>
-Des:
##----------------------------------------
=Pkg: acroread-fonts-zh_CN 9.4.6 0.4.2.2 noarch
=Sum: Simplified Chinese fonts for acroread
+Des:
<!-- DT:Rich -->
<p>Simplified Chinese fonts for acroread
</p>
-Des:
##----------------------------------------
=Pkg: acroread-fonts-zh_TW 9.4.6 0.4.2.2 noarch
=Sum: Traditional Chinese fonts for acroread
+Des:
<!-- DT:Rich -->
<p>Traditional Chinese fonts for acroread
</p>
-Des:
##----------------------------------------
=Pkg: adaptec-firmware 1.35 2.8 noarch
=Sum: Firmware files for Adaptec SAS Cards (AIC94xx Series)
+Des:
<!-- DT:Rich -->
<p>Firmware files for the Adaptec AIC94xx (Razor) Series of SAS HBA Adapters.
</p>
-Des:
##----------------------------------------
=Pkg: agfa-fonts 2003.03.19 156.21 noarch
=Sum: Profesionální TrueType písma
+Des:
<!-- DT:Rich -->
<p>Professional TrueType Fonts
<ul>
<li>&quot;Albany AMT&quot;

</li><li>&quot;Cumberland AMT&quot;

</li><li>&quot;Thorndale AMT&quot;

</li><li>&quot;Andy MT&quot;

</li><li>&quot;Andale Sans&quot;

</li><li>&quot;Arial Black&quot;

</li><li>&quot;Bell MT&quot;

</li><li>&quot;Impact&quot;

</li><li>&quot;Utah MT&quot;

</li><li>&quot;Monotype Sorts&quot; (a symbol font)
</li></ul></p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>AGFA MONOTYPE CORPORATION
END USER LICENSE AGREEMENT
</p><p>
We recommend that you print this End User Agreement for further reference.
</p><p>
</p><p>
This Agfa Monotype Corporation End User Agreement (the &quot;Agreement&quot;) becomes a binding contract
between you and Agfa Monotype Corporation (a) when you click on the area marked &quot;ACCEPT LICENSE
AGREEMENT&quot;, or, (b) if you are acquiring Font Software on a floppy disk, when you open the package
in which the font is contained. If you do not wish to be bound by the Agreement, you cannot access,
use or download the Font Software. Please read all of the Agreement before you agree to be bound by
its terms and conditions.
</p><p>
You hereby agree to the following:
<ol>
<li>You are bound by the Agreement and you acknowledge that all Use (as defined herein) of the Font
Software (as defined herein) supplied to you by AMT is governed by the Agreement.

</li><li>&quot;AMT&quot; as used herein shall mean collectively Agfa Monotype Corporation, its successors and
assigns, its parent and affiliated corporations, its authorized distributors, and any third party
that has licensed to AMT any or all of the components of the Font Software supplied to you
pursuant to the Agreement.

</li><li>&quot;Font Software&quot; as used herein shall mean software which, when used on an appropriate device or
devices, generates typeface and typographic designs and ornaments. Font Software shall include all
bitmap representations of typeface and typographic designs and ornaments created by or derived from
the Font Software. Font Software includes upgrades, updates, related files, permitted modifications,
permitted copies, and related documentation.

</li><li>&quot;Basic Licensed Unit&quot; as used herein shall mean up to five (5) Workstations (as defined herein)
connected to no more than one (1) printer with a non-volatile memory (for example, a hard drive),
all located at a single geographic location. If you intend to use the Font Software on more
equipment than permitted by a Basic Licensed Unit, you must create an &quot;Expanded Licensed Unit&quot; by
obtaining from AMT, for an additional fee, a site license for all such equipment. &quot;Licensed Unit&quot; as
used herein shall mean a Basic Licensed Unit or an Expanded Licensed Unit as is appropriate to the
context in which the term is used. If you have acquired an entire Font Software Library (that is, a
single license for Font Software for 500 or more different typeface designs) and you use such Font
Software Library only at a single geographic location, then &quot;Licensed Unit&quot; shall mean up to twenty
(20) Workstations connected to no more than two (2) printers with non-volatile memories at such
geographic location.

</li><li>&quot;Use&quot; of the Font Software shall occur when an individual is able to give commands (whether by
keyboard or otherwise) that are followed by the Font Software, regardless of the location in which
the Font Software resides.

</li><li>&quot;Derivative Work&quot; shall mean binary data based upon or derived from Font Software (or any portion
of Font Software) in any form in which such binary data may be recast, transformed, or adapted
including, but not limited to, binary data in any format into which Font Software may be converted.

</li><li>&quot;Personal or Internal Business Use&quot; shall mean Use of the Font Software for your customary
personal or internal business purposes and shall not mean any distribution whatsoever of the Font
Software or any component or Derivative Work thereof.  &quot;Personal or Internal Business Use&quot; shall not
include any Use of the Font Software by persons that are not members of your immediate household,
your authorized employees, or your authorized agents.  All such household members, employees, and
agents shall be notified by you as to the terms and conditions of the Agreement and shall agree to
be bound by it before they can have Use of the Font Software.

</li><li>&quot;Workstation&quot; as used herein shall mean a component in which an individual is able to give
commands (whether by keyboard or otherwise) that are followed by the Font Software, regardless of
the location in which the Font Software resides.

</li><li>&quot;Commercial Product&quot; as used herein shall mean an electronic document or data file created by Use
of the Font Software that is offered for distribution to the general public (or to some subset of
the general public) as a commercial product in exchange for a separate fee or other consideration.
By way of illustration and not by way of limitation, an electronic book or magazine distributed for
a fee shall be considered a Commercial Product; a document distributed in connection with a
commercial transaction in which the consideration is unrelated to such document (for example, a
business letter, a ticket for an event, or a receipt for purchase of tangible goods such as
clothing) shall not be considered a Commercial Product.

</li><li>You are hereby granted a non-exclusive, non-assignable, non-transferable (except as expressly
permitted herein) license to access the Font Software (i) only in a Licensed Unit, (ii) only for your
Personal or Internal Business Use, and (iii) only subject to all of the terms and conditions of the
Agreement. You have no rights to the Font Software other than as expressly set forth in the
Agreement. You agree that AMT owns all right, title and interest in and to the Font Software, its
structure, organization, code, and related files, including all property rights therein such as
copyright, design and trademarks rights. You agree that the Font Software, its structure,
organization, code, and related files are valuable property of AMT and that any intentional Use of
the Font Software not expressly permitted by the Agreement constitutes a theft of valuable property.
All rights not expressly granted in the Agreement are expressly reserved to AMT. You may not use the
Font Software to electronically distribute a Commercial Document without a separate license from AMT
authorizing you to do so.

</li><li>You may install and Use the Font Software on a single file server for Use on a single local area
network (&quot;LAN&quot;) only when the Use of such Font Software is limited to the Workstations and printers
that are part of the Licensed Unit of which the server is a part. For the purpose of determining the
proper number of Workstations for which a license is needed, the following example is supplied for
illustration purposes only: If there are 100 Workstations connected to the server, with no more than
15 Workstations ever using the Font Software concurrently, but the Font Software will be used on 25
different Workstations at various points in time, a site license must be obtained creating a
Licensed Unit for 25 Workstations. The Font Software may not be installed or Used on a server that
can be accessed via the Internet or other external network system (a system other than a LAN) by
Workstations that are not part of a Licensed Unit.

</li><li>You may electronically distribute Font Software embedded in a &quot;Personal or Internal Business
Use&quot; document (that is, a document other than a &quot;Commercial Product&quot; as defined herein) only when
the Font Software embedded in such document (i) is in a static graphic image (for example, a &quot;gif&quot;)
or an embedded electronic document, and (ii) is distributed in a secure format that permits only the
viewing and printing (and not the editing, altering, enhancing, or modifying) of such static graphic
image or embedded document. You may not embed Font Software in a Commercial Product without a
separate written license from AMT, and you may not embed Font Software in an electronic document or
data file for any reason other than your own Personal or Internal Business Use.

</li><li>You may not alter Font Software for the purpose of adding any functionality which such Font
Software did not have when delivered to you by AMT. If the Font Software contains embedding bits
that limit the capabilities of the Font Software, you may not change or alter the embedding bits.
Font Software may not be used to create or distribute any electronic document in which the Font
Software, or any part thereof, is embedded in a format that permits editing, alterations,
enhancements, or modifications by the recipient of such document.  If you have reason to believe
that a recipient of an electronic document possesses the capability to edit, alter, enhance, or
modify such electronic document even though you have distributed it in a format which does not
permit such editing, alteration, enhancement, or modification, you shall not transmit such document
to such person.

</li><li>You may take a digitized copy of the Font Software used for a particular document, or Font
Software embedded in an electronic document, to a commercial printer or service bureau for use by
the printer or service in printing such document but only if the printer or service bureau
represents to you that it has purchased or been granted a license to use that particular Font
Software.

</li><li>You acknowledge that the Font Software is protected by the copyright and other intellectual
property law of the United States and its various States, by the copyright and design laws of other
nations, and by international treaties.  You agree to treat the Font Software as you would any other
copyrighted material, such as a book. You may not copy the Font Software, except as expressly
provided herein. Any copies that you are expressly permitted to make pursuant to the Agreement must
contain the same copyright, trademark, and other proprietary notices that appear on or in the Font
Software. You agree not to adapt, modify, alter, translate, convert, or otherwise change the Font
Software, or to create Derivative Works from Font Software or any portion thereof. You further agree
not to use Font Software in connection with software and/or hardware that create Derivative Works of
such Font Software.  You agree not to reverse engineer, decompile, disassemble, or otherwise attempt
to discover the source code of the Font Software, provided, however, that if you are located in a
European Community member country or any other country which provides rights materially similar to
the rights set forth in this proviso, you may reverse engineer or decompile the Font Software only
to the extent that sufficient information is not available for the purpose of creating an
interoperable software program (but only for such purpose and only to the extent that sufficient
information is not provided by AMT upon written request). You agree to use trademarks associated
with the Font Software according to accepted trademark practice, including identification of the
trademark owner&#39;s name. Trademarks can only be used to identify printed output produced by the Font
Software. The use of any trademark as herein authorized does not give you any rights of ownership in
that trademark and all use of any trademark shall inure to the sole benefit of AMT. You may not
change any trademark or trade name designation for the Font Software.

</li><li>You may not rent, lease, sublicense, give, lend, or further distribute the Font Software, or any
copy thereof, except as expressly provided herein. You may transfer all your rights to use the Font
Software to another person or legal entity provided that (i) the transferee accepts and agrees to be
bound by all the terms and conditions of the Agreement, and (ii) you destroy all copies of the Font
Software, including all copies stored in the memory of a hardware device. If you are a business or
organization, you agree that upon request from AMT or AMT&#39;s authorized representative, you will with
thirty (30) days fully document and certify that use of all AMT Font Software at the time of the
request is in conformity with your valid licenses from AMT.

</li><li>You may make one back-up copy of Font Software for archival purposes only, and you shall retain
exclusive custody and control over such copy. Upon termination of the Agreement, you must destroy
the original and all copies of the Font Software.

</li><li>AMT warrants to you that the Font Software will perform substantially in accordance with its
documentation for the ninety (90) day period following delivery of the Font Software. To make a
warranty claim, you must, within the ninety (90) day warranty period, return the Font Software to
the location from which you obtained it along with a copy of your receipt or, if such Font Software
is acquired on-line, contact the on-line provider with sufficient information regarding your
acquisition of the Font Software so as to enable AMT to verify the existence and date of the
transaction. If the Font Software does not perform substantially in accordance with its
documentation, the entire, exclusive, and cumulative liability and remedy shall be limited to the
refund of the license fee you paid to AMT to obtain delivery of the Font Software. AMT DOES NOT
WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE FONT SOFTWARE. THE FOREGOING STATES
THE SOLE AND EXCLUSIVE REMEDIES FOR AMT&#39;S BREACH OF WARRANTY. EXCEPT FOR THE FOREGOING LIMITED
WARRANTY, AMT MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, AS TO NON-INFRINGEMENT OF
THIRD PARTY RIGHTS, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT WILL AMT BE
LIABLE TO YOU OR ANYONE ELSE (I) FOR ANY CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING
WITHOUT LIMITATION ANY LOST PROFITS, LOST DATA, LOST BUSINESS OPPORTUNITIES, OR LOST SAVINGS, EVEN
IF AMT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR (II) FOR ANY CLAIM AGAINST YOU BY ANY
THIRD PARTY SEEKING SUCH DAMAGES EVEN IF AMT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
</li></ol>
Some states or jurisdictions do not allow the exclusions of limitations of incidental, consequential
or special damages, so the above exclusion may not apply to you. Also, some states or jurisdictions
do not allow the exclusions of implied warranties or limitations on how long an implied warranty may
last, so the above limitations may not apply to you. To the greatest extent permitted by law, any
implied warranties not effectively excluded by the Agreement are limited to ninety (90) days. Some
jurisdictions do not permit a limitation of implied warranties where the product results in physical
injury or death so that such limitations may not apply to you. In those jurisdictions, you agree
that AMT&#39;s liability for such physical injury or death shall not exceed One Hundred Thousand Dollars
(U.S. $100,000), provided that such jurisdictions permit a limitation of such liability. This
warranty gives you specific legal rights. You may have other rights that vary from state to state or
jurisdiction to jurisdiction. The Font Software is non-returnable and nonrefundable.
<ol>
<li>The Agreement will be governed by the laws of Illinois applicable to contracts wholly entered
and performable within such state. All disputes related to the Agreement shall be heard in the
Circuit Court of Cook County, Illinois, U.S.A. or the United States District Court for the Northern
District of Illinois, Chicago, Illinois U.S.A. Both you and AMT agree to the personal jurisdiction
and venue of these courts in any action related to the Agreement. The Agreement will not be governed
by the United Nations Convention of Contracts for the International Sale of Goods, the application
of which is expressly excluded. If any part of this Agreement is found void and unenforceable, it
will not affect the validity of the balance of the Agreement, which shall remain valid and
enforceable according to its terms.

</li><li>The Agreement shall automatically terminate upon failure by you (or any authorized person or
member of your immediate household to whom you have given permission to Use the Font Software) to
comply with its terms. The termination of the Agreement shall not preclude AMT from suing you for
damages of any breach of the Agreement. The Agreement may only be modified in writing signed by an
authorized officer of AMT. You agree that the Font Software will not be shipped, transferred or
exported into any country or used in any manner prohibited by the United States Export
Administration or any applicable export laws, restrictions or regulations.

</li><li>You have the rights expressly set forth in the Agreement and no other. All rights in and to the
Font Software, including unpublished rights, are reserved under the copyright laws of the United
States and other jurisdictions. All rights reserved. Notwithstanding the foregoing, to the extent
that any law, statute, treaty, or governmental regulation shall be deemed by a court of competent
jurisdiction to provide you with any additional or different rights from those provided herein and
such rights shall be deemed non-waiveable as a matter of law and to supersede the rights
specifically provided herein, then such law, statute, treaty, or governmental regulation shall be
deemed to be made a part of the Agreement. To the extent that any such rights created by any law,
statute, treaty or governmental regulation are waiveable, you agree that your acceptance of the
Agreement shall constitute an effective and irrevocable waiver of such rights. The Agreement may be
enforced by AMT or by an authorized dealer acting on behalf of AMT.

</li><li>If this product is acquired under the terms of a (i) GSA contract - use, reproduction or
disclosure is subject to the restrictions set forth in the applicable ADP Schedule contract, (ii)
DOD contract - use, duplication or disclosure by the Government is subject to the applicable
restrictions set forth in DFARS 252.277-7013; (iii) Civilian agency contract - use, reproduction, or
disclosure is subject to FAR 52.277-19(a) through (d) and restrictions set forth in the Agreement.
</li></ol>
&quot;Monotype&quot; is a trademark of Agfa Monotype Limited registered in the U.S.  Patent and Trademark
Office and elsewhere. All other trademarks are the property of their respective owners.
</p>
-Eul:
##----------------------------------------
=Pkg: alsa-firmware 1.0.17 1.28.1 noarch
=Sum: Firmware pro systém ALSA
+Des:
<!-- DT:Rich -->
<p>Různý firmware pro ALSA ovladače.
</p>
-Des:
##----------------------------------------
=Pkg: apel 10.6 2.17 noarch
=Sum: Přenositelná knihovna pro Emacs
##----------------------------------------
=Pkg: apel-xemacs 10.6 351.19 noarch
=Sum: Přenositelná knihovna pro Emacs
+Des:
<!-- DT:Rich -->
<p>APEL je zkratka z &quot;A Portable Emacs Library&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-admin_en-pdf 10.3 8.24.1 noarch
=Sum: AppArmor Admin Guide (English) as PDF
+Des:
<!-- DT:Rich -->
<p>PDF of the AppArmor Administration Guide (English).
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-profiles 2.3 48.13.1 noarch
=Sum: AppArmor profily, které se načítají do jaderného modulu apparmor
+Des:
<!-- DT:Rich -->
<p>Základní profily. AppArmor je kontrolní mechanismus přístupu k souborům
a síti. AppArmor omezuje procesy na zdroje povolené systémovým
administrátorem a je schopný omezit rozsah dopadu potencionální
bezpečnostní chyby.
</p><p>
Tento balíček je součástí sady nástrojů, která se nazývala SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: atmel-firmware 1.3 139.8 noarch
=Sum: Firmware pro bezdrátové síťové karty s čipem Atmel at76c50x
+Des:
<!-- DT:Rich -->
<p>Ovladač pro bezdrátové síťové karty s čipem Atmel at76c50x v jádře 2.6.x a
z http://at76c503a.berlios.de/ neobsahuje firmware. Firmware je nutné stáhnout
pro většinu karet založených na tomto čipu. Tento balíček obsahuje obraz firmwaru,
který by měl být automaticky zaveden hotplug systémem. Poskytuje také malý nástroj,
který umožní zavedení v případě nefunkčnosti systému hotplug.
</p>
-Des:
##----------------------------------------
=Pkg: autoyast2 2.17.57 0.5.35 noarch
=Sum: YaST2 - Automated Installation
+Des:
<!-- DT:Rich -->
<p>Tento balíček slouží jako manager pro správu kontrolních souborů a konfiguraci programu AutoYaST2. Tento systém by měli používat pouze zkušení administrátoři.
Pozor:
AutoYaST2 provádí instalaci bez jakékoliv kontroly uživatelem, varování či potvrzování
(pokud v konfiguračním souboru nenastavíte jinak).
</p><p>
Tento soubor obsahuje soubory nezávislé na YaST2, nutné pro vytváření instalačních
zdrojů.
</p>
-Des:
##----------------------------------------
=Pkg: autoyast2-installation 2.17.57 0.5.35 noarch
=Sum: Moduly pro automatickou instalaci pomocí AutoYaST2
+Des:
<!-- DT:Rich -->
<p>Tento balík provádí automatickou instalaci podle řídícího souboru vytvořeného pomocí autoyast2 balíku.
</p>
-Des:
##----------------------------------------
=Pkg: baekmuk 2.1 560.20 noarch
=Sum: Fonty Baekmuk (korejská písma pro X11, bitmapová verze)
+Des:
<!-- DT:Rich -->
<p>Fonty Baekmuk (korejská písma pro X11, bitmapová verze)
</p>
-Des:
##----------------------------------------
=Pkg: baekmuk-ttf 2.1 560.20 noarch
=Sum: Fonty Baekmuk pro X11 (korejská písma pro X11, True Typová verze)
+Des:
<!-- DT:Rich -->
<p>Fonty Baekmuk (korejská písma pro X11, True Typová verze).
</p>
-Des:
##----------------------------------------
=Pkg: bitstream-vera 1.10 303.22 noarch
=Sum: Truetype písma Bitstream Vera(tm)
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje truetype písmo &quot;Vera&quot; od Bitstream Inc.
</p>
-Des:
##----------------------------------------
=Pkg: boo 0.8.2.2960 1.31 noarch
=Sum: Skriptovací jazyk CLI
+Des:
<!-- DT:Rich -->
<p>Boo is a new object oriented statically typed programming language for the Common Language Infrastructure with a python inspired syntax and a special focus on language and compiler extensibility.
</p>
-Des:
##----------------------------------------
=Pkg: branding-SLED 11 10.15 noarch
=Sum: SuSE Brand File
+Des:
<!-- DT:Rich -->
<p>This package contains the file /etc/SuSE-brand, and its name is used as a trigger for installation of correct vendor brand packages.
</p>
-Des:
##----------------------------------------
=Pkg: cedict 20070331 2.7 noarch
=Sum: Free Chinese-English Dictionary in EDICT Format
+Des:
<!-- DT:Rich -->
<p>This is a free Chinese-English dictionary that can be used, for example, with Gjiten.
</p><p>
The objective of the CEDICT project is to create an online, downloadable
(as opposed to searchable-only) public-domain Chinese-English dictionary.
For the most part, the project is modelled on Jim Breen&#39;s highly successful
EDICT (Japanese-English dictionary) project and is intended to be a
collaborative effort with users providing entries and corrections to
the main file.
</p>
-Des:
##----------------------------------------
=Pkg: cim-schema 2.19.1 2.7 noarch
=Sum: Schéma CIM (Common Information Model)
+Des:
<!-- DT:Rich -->
<p>CIM (Common Information Model) je model pro popis celkové informační správy
v síti či podnikovém prostředí. CIM se skládá ze specifikace a schématu. Specifikace
určuje podrobnosti pro integraci s dalšími modely správy. Schéma poskytuje skutečný
popis modelu.
</p>
-Des:
##----------------------------------------
=Pkg: cm-unicode 0.4.2 177.17 noarch
=Sum: Unicode verze písem Computer Modern
+Des:
<!-- DT:Rich -->
<p>Fonty Computer Modern Unicode byly vytvořeny z metafontových zdrojů
pomocí [1] textrace a [2] pfaedit (030404). Jejich hlavním cílem je vytvořit
kvalitní fonty pro X Window aplikace podporující mnoho jazyků. V současnosti
fonty obsahují znaky Latin1, azbuku a řecké.
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-provider-register 1.0 2.14 noarch
=Sum: CIMOM neutral provider registration utility
+Des:
<!-- DT:Rich -->
<p>A utility allowing CMPI provider packages to register with whatever
CIMOM(s) happens to be present on the system.
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-pywbem-base 0.2.0 2.27 noarch
=Sum: Base System Providers
+Des:
<!-- DT:Rich -->
<p>Base System CIM Providers
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-pywbem-power-management 0.2.0 2.27 noarch
=Sum: Power Management Providers
+Des:
<!-- DT:Rich -->
<p>Power Management Providers based on DSP1027.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-manager 0.0.1_git080201 55.3.1 noarch
=Sum: A wrapper script to launch Compiz with proper options
+Des:
<!-- DT:Rich -->
<p>Compiz Manager wrapper script
</p><p>
This script will detect what options we need to pass to compiz to get it
started, and start a default plugin and possibly window decorator.
</p>
-Des:
##----------------------------------------
=Pkg: convmv 1.12 1.22 noarch
=Sum: Převod kódování jmen souborů
+Des:
<!-- DT:Rich -->
<p>convmv umí jména souborů nebo jména z celého souborového systému převést
do jiného kódování. Nepřevádí tedy obsah souborů, ale pouze jejich názvy. Zvláštní
funkcí je převádění jmen odkazů v případě převodu svázaného souboru.
</p><p>
Tento program je velmi užitečný při převodu starého souborového systému v novém
systému S UTF-8. Poradí si také s adresáři, které jsou již částečně převedené.
Již převedené soubory jednoduše detekuje a přeskočí. Pokud vám toto chování
nevyhovuje, použijte volbu --nosmart.
</p><p>
Možné problémy s využíváním UTF-8:
Linux a (většina?) unix-like systémů používá pro UTF-8 kódování tzv. normalizovanou
formu C (NFC). Darwin, Macintosh OSX, používá formu D (NFD), kde jsou znaky
kódovány jiným způsobem. convmv je schopný převádět také tyto dvě formy a zajistit
tak spolupráci těchto systémů.
</p>
-Des:
##----------------------------------------
=Pkg: culmus 0.101 14.8 noarch
=Sum: Svobodné hebrejské fonty
+Des:
<!-- DT:Rich -->
<p>Devět hebrejských rodin písem. ASCII znaky částečně vypůjčeny z písem
URW a Bitstream. Rodiny nabízí základní sadu patkového (Frank Ruehl),
bezpatkového (Nachlieli) a neproporcionálního (Miriam Mono). Zahrnuty
jsou také Miriam, Drugulin, Aharoni, David, Yehuda a Ellinia.
</p>
-Des:
##----------------------------------------
=Pkg: ddskk 20050123 149.29 noarch
=Sum: SKK (`Simple Kana to Kanji') konverzní program pro Emacs
+Des:
<!-- DT:Rich -->
<p>Konverzní program SKK (`Simple Kana to Kanji&#39;) je japonská vstupní metoda
pro Emacs. ddskk (&#39;Daredevil SKK&#39;) je intenzivně vyvíjená verze SKK.
</p>
-Des:
##----------------------------------------
=Pkg: ddskk-xemacs 20050123 149.29 noarch
=Sum: SKK (`Simple Kana to Kanji') konverzní program pro XEmacs
+Des:
<!-- DT:Rich -->
<p>Konverzní program SKK (`Simple Kana to Kanji&#39;) je japonská vstupní metoda
pro XEmacs. ddskk (&#39;Daredevil SKK&#39;) je intenzivně vyvíjená verze SKK.
</p>
-Des:
##----------------------------------------
=Pkg: dejavu 2.32 4.2.1 noarch
=Sum: DejaVu Truetype Fonts
+Des:
<!-- DT:Rich -->
<p>The DejaVu fonts are a font family based on the Bitstream Vera Fonts.
Its purpose is to provide a wider range of characters while maintaining the
original look and feel through the process of collaborative development.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-data-SLED 11 29.19.1 noarch
=Sum: SLED Theme Files for KDE and GNOME
+Des:
<!-- DT:Rich -->
<p>This package contains the SUSE Linux Enterprise menu structure files for KDE and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-data-SLED-extra-gnome 11 24.10.37 noarch
=Sum: SLED defaults for the GNOME configuration system
+Des:
<!-- DT:Rich -->
<p>This package provides SLED defaults for configurations based on GConf database system.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-translations 11.1 10.37.1 noarch
=Sum: Desktop Files Translation updates
+Des:
<!-- DT:Rich -->
<p>This package provides further translations for installed desktop files.
</p>
-Des:
##----------------------------------------
=Pkg: doc-gnu-ko 20000924 531.8 noarch
=Sum: Korejské překlady GNU manuálů
+Des:
<!-- DT:Rich -->
<p>Korejské překlady GNU manuálů.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-dsssl-stylesheets 1.79 19.6 noarch
=Sum: DSSSL styly pro DocBook DTD
+Des:
<!-- DT:Rich -->
<p>Use these DSSSL stylesheets to convert DocBook documents
into other formats. &quot;Print&quot; (TeX and RTF) and &quot;online&quot; (HTML) output formats are available.
</p><p>
The stylesheets are customizable and, within limits, it is possible to
adapt them for your own needs. Numerous native languages are
supported.
</p><p>
The authors of these stylesheets do not inlude any new features, but only fix bugs.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-toys 1.51.0 372.15 noarch
=Sum: DocBook nástroje
+Des:
<!-- DT:Rich -->
<p>Shellové skripty na konvertování SGML dokumentů používajících DocBook
DTD.
Informace získáte v souboru:
/usr/share/doc/packages/docbook-toys/README
</p>
-Des:
##----------------------------------------
=Pkg: docbook-utils 0.6.14 171.14 noarch
=Sum: Malý program pro každodenní práci s DocBook soubory
+Des:
<!-- DT:Rich -->
<p>Balíček docbook-utils obsahuje skupinu malých programů pro každodenní práci s proramy pro tvorbu technické dokumentace založené na DocBooku DTD, SGML nebo XML.
</p><p>
Podporované úlohy:<ul>
<li>jw: konvertor ze SGML do HTML, RTF, Postscript, PDF
</li><li>sgmldiff: hledá rozdíly v SGML dokumentech.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: docbook-xsl-stylesheets 1.74.0 1.14 noarch
=Sum: XSL Stylesheets for the DocBook 4 and earlier
+Des:
<!-- DT:Rich -->
<p>These are the XSL stylesheets for DocBook XML and &quot;Simplified&quot; DocBook DTDs. Generally, stylesheets do not know any namespace and you should use these for DocBook 4 and earlier only.
</p><p>
The stylesheets transforms your DocBook document into (X)HTML, Manpages, XSL-FO (for PDF) and a few other formats.
</p><p>
XSL is a standard W3C stylesheet language for both print and online rendering. For more information about XSL, see the XSL page at the W3C.
</p>
-Des:
##----------------------------------------
=Pkg: docbook_3 3.1 643.6 noarch
=Sum: DocBook DTD 3.x
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje verzi 3.0 a 3.1 a XML verzi.
Je vhodný pro psaní technické dokumentace.
</p><p>
</p><p>
Dokumentaci naleznete v /usr/share/doc/packages/docbook_3.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>U nových projektů zvažte použití verze 4.x.
</p>
-Ins:
##----------------------------------------
=Pkg: docbook_4 4.5 111.14 noarch
=Sum: DocBook DTD verze 4.x
+Des:
<!-- DT:Rich -->
<p>DocBook is a schema. It is particularly well-suited to books and papers about computer hardware and software (though it is not limited to these applications at all).
This package has SGML- and XML-DTD versions included. Some versions of DocBook contain also a RELAX NG and W3C Schema.
</p>
-Des:
##----------------------------------------
=Pkg: edict 20060807 2.8 noarch
=Sum: Japonské slovníkové soubory z projektu Jima Breena EDICT
+Des:
<!-- DT:Rich -->
<p>EDICT je výsledkem volně dostupného projektu, jehož cílem je volně
dostupný japonsko anglický slovník, který by byl čitelný také pro počítače.
Projekt byl zahájen v roce 1991 s původně velice malým slovníčkem,
který obsahoval balík pro zpracování textu MOKE (Mark&#39;s Own Kanji Editor).
Když dosáhl velikosti přesahující 103 000 položek, byl rozdělen do dvou
souborů: &quot;EDICT&quot;, který obsahoval &quot;běžná&quot; slova a &quot;ENAMDICT&quot;, obsahující
vlastní názvy. Oba soubory jsou požívány mnoha softwarovými balíky a
tisíci uživateli na celém světě. EDICT soubor má nyní více než 60 000 položek
a ENAMDICT přes 160 000.
</p><p>
Mimo těchto dvou částí jsou ještě k dispozici slovníkové soubory se zvláštním
určením, např. COMPDIC pro slova z informatiky a telekomunikací.
</p>
-Des:
##----------------------------------------
=Pkg: efont-unicode 0.4.2 42.20 noarch
=Sum: Unicodové fonty od /efontu/
+Des:
<!-- DT:Rich -->
<p>Unicodové fonty od /efontu/.
Tento balíček obsahuje 12,14, 16 a 24 pixelové ISO-10646 písma.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-auctex 11.85 7.33 noarch
=Sum: AucTeX: rozšíření Emacsu
+Des:
<!-- DT:Rich -->
<p>Balíček maker usnadňujících vytváření dokumentů pro TeX v GNU Emacsu.
Dokumentaci k balíčku naleznete v adresáři
</p><p>
/usr/share/doc/packages/auctex/
</p><p>
dále v dvi souborech math-ref.dvi tex-ref.dvi (referenční karty) a v info
souborech auctex v emacsovském info režimu.
</p><p>
Balíček nemusíte instalovat, pokud používáte XEmacs od verze 19.15, ve
kterém je AuC TeX zabudovaný. Binární formáty přeložených lispových
souborů pro obě verze emacsu nejsou kompatibilní, takže tento balíček
nemůžete používat pro XEmacs.
</p>
-Des:
##----------------------------------------
=Pkg: engdic 0.2 2.7 noarch
=Sum: Malý korejsko<->anglický slovník
+Des:
<!-- DT:Rich -->
<p>Malý korejsko&lt;-&gt;anglický slovník.
</p>
-Des:
##----------------------------------------
=Pkg: farsifonts 0.4 53.17 noarch
=Sum: Sbírka svobodných perských OpenType fontů
+Des:
<!-- DT:Rich -->
<p>Sbírka svobodných perských písem OpenType.
</p>
-Des:
##----------------------------------------
=Pkg: flickrnet 2.1.5 11.5.84 noarch
=Sum: Flickr.Net API Library
+Des:
<!-- DT:Rich -->
<p>The Flickr.Net API is a .Net Library for accessing the Flickr API. Written entirely in C# it can be accessed from with any .Net language.
</p>
-Des:
##----------------------------------------
=Pkg: flim 1.14.7 78.29 noarch
=Sum: An Emacs Library for MIME
+Des:
<!-- DT:Rich -->
<p>Pro kódování a dekódování MIME zpráv.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-arabic 0.20090114 1.13 noarch
=Sum: Sbírka volně dostupných arabských písem
+Des:
<!-- DT:Rich -->
<p>Sbírka volně dostupných arabských písem z
http://www.arabeyes.org/resources.php.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-config 20080121 25.21 noarch
=Sum: Configures Fonts for X Windows and other applications
+Des:
<!-- DT:Rich -->
<p>Configures Fonts for X Windows and other applications.
</p><p>
Usually fonts-config is called automatically via SuSEconfig
(SuSEconfig --module fonts), which is usually automatically
called by YaST2. You can also execute fonts-config
directly, which is mainly useful for debugging it.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-thai 0.4.3.1 215.20 noarch
=Sum: Sbírka volně dostupných thajských TrueType písem
+Des:
<!-- DT:Rich -->
<p>Obsažená thajská TrueType písma jsou Norasi a Garuda
z projektu National Font.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-thryomanes 1.2 40.9 noarch
=Sum: Řecká TrueType písma
+Des:
<!-- DT:Rich -->
<p>Tato písma obsahují kompletní sadu písmen azbuky a zdokonalená písma latinky.
</p>
-Des:
##----------------------------------------
=Pkg: free-ttf-fonts 1.0 212.9 noarch
=Sum: Volně dostupná ozdobná TrueType písma
+Des:
<!-- DT:Rich -->
<p>Více než 300 volně dostupných TrueType písem. Velká část je v uměleckém stylu a nelze použít pro pracovní prostředí, ale skvěle se hodí pro plakáty a jinou grafiku.
</p><p>
Písma jsou distribuována pod licencí GPL nebo jako freeware. Některé vyžadují příspěvek
tvůrců. Podrobnosti o licencích najdete v /usr/share/doc/packages/free-ttf-fonts/.
</p>
-Des:
##----------------------------------------
=Pkg: freefont 0.20080323 1.17 noarch
=Sum: Volně šiřitelná UCS obrysová písma
+Des:
<!-- DT:Rich -->
<p>Sada volně šiřitelných obrysových fontů (např. OpenType) pokrývajících
ISO 10646/Unicode UCS (Universal Character Set). Sada sestává ze tří
písem: jednoho neproporcionálního a dvou proporcionálních (jedno
s uniformními a jedno s proměnlivými tahy).
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-branding-SLED 2.25 0.10.37 noarch
=Sum: SLED defaults for the GNOME configuration system
+Des:
<!-- DT:Rich -->
<p>This package provides SLED defaults for configurations based on GConf database system.
</p>
-Des:
##----------------------------------------
=Pkg: gdata-sharp 1.4.0.2 11.7.18 noarch
=Sum: Library and source code to access data through Google Data APIs
+Des:
<!-- DT:Rich -->
<p>The GData .NET Client Library provides a library and source code that make it easy to access data through Google Data APIs.
</p>
-Des:
##----------------------------------------
=Pkg: gecko-sharp2 0.13 93.13.1 noarch
=Sum: Gecko vazby pro Mono
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for the Gecko engine, through an easy-to-use widget that will allow you to embed a Mozilla browser window into your Gtk# application.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-cjk 20050315 144.22 noarch
=Sum: Věci pro CJK TrueType fonty a CID fonty v Ghostscriptu
+Des:
<!-- DT:Rich -->
<p>CMap, skripty a další užitečné věci pro CJK TrueType fonty a
CID fonty v Ghostscriptu
</p>
-Des:
##----------------------------------------
=Pkg: gimp-branding-SLED 11.1 1.35 noarch
=Sum: SLED splash screen for GIMP
+Des:
<!-- DT:Rich -->
<p>This package contains openSUSE splash screen for the SLED.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help 2.4.2 2.31 noarch
=Sum: Data nápovědy pro GIMP 2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-de 2.4.2 2.31 noarch
=Sum: German Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-es 2.4.2 2.31 noarch
=Sum: Spanish Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-fr 2.4.2 2.31 noarch
=Sum: French Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-it 2.4.2 2.31 noarch
=Sum: Italian Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-ko 2.4.2 2.31 noarch
=Sum: Korean Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-nb 2.4.2 2.31 noarch
=Sum: Norwegian Bokmal Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-nl 2.4.2 2.31 noarch
=Sum: Dutch Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-pl 2.4.2 2.31 noarch
=Sum: Polish Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-ru 2.4.2 2.31 noarch
=Sum: Russian Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-help-sv 2.4.2 2.31 noarch
=Sum: Swedish Help System Data for GIMP2
+Des:
<!-- DT:Rich -->
<p>GIMP-Help je nápověda určená pro interní prohlížeč nápovědy
GIMPu, webové prohlížeče a vykreslovače HTML a především
lidské oči. Použití systému Docbook zajišťuje přizpůsobitelnost.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-branding-SLED 2.16 47.4.1 noarch
=Sum: Definition of GNOME Default Applications
+Des:
<!-- DT:Rich -->
<p>This branding-style package sets default applications in GNOME in openSUSE.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-audio 2.22.2 1.17 noarch
=Sum: Zvuky pro aplikace GNOME
+Des:
<!-- DT:Rich -->
<p>Zvuky pro události pro GNOME a Gtk aplikace.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-backgrounds 2.28.0 1.1.55 noarch
=Sum: Tapety pro GNOME
+Des:
<!-- DT:Rich -->
<p>Obrázky na pozadí z GNOME projektu.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-icon-theme 2.28.0 1.2.11 noarch
=Sum: Motiv ikon pro GNOME
+Des:
<!-- DT:Rich -->
<p>Výchozí motiv ikon pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-sharp 1.0.0 1.34 noarch
=Sum: Managed Implementation of libgnome-keyring.
+Des:
<!-- DT:Rich -->
<p>When the gnome-keyring-daemon is running, you can use this to retrieve/store confidential information such as passwords, notes or network services user information.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus-branding-SLED 11.1 14.26 noarch
=Sum: SLED branding of gnome-menus
+Des:
<!-- DT:Rich -->
<p>This package provides SLED menu look for gnome-menus.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mime-data 2.18.0 67.27.293 noarch
=Sum: Databáze MIME typů a aplikací pro prostředí GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento modul obsahuje základní MIME a aplikační databázi pro GNOME. Přístup je
realizován prostřednictvím MIME funkcí v GnomeVFS.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-themes 2.28.1 0.1.197 noarch
=Sum: Témata GNOME
+Des:
<!-- DT:Rich -->
<p>Témata pro GNOME, včetně Ximian Industrial a vybraných obrázků pozadí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome2-user-docs 2.24.0 1.32 noarch
=Sum: Dokumentace pro GNOME 2.x desktop
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dokumenty zaměřené
na koncové uživatele GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-crypto 2.0.1 41.30 noarch
=Sum: GNU Crypto
+Des:
<!-- DT:Rich -->
<p>GNU Crypto, part of the GNU project, released under the aegis of GNU, aims at providing free, versatile, high-quality, and provably correct implementations of cryptographic primitives and tools in the Java programming language for use by programmers and end-users.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash-docs 2.2.0 2.22 noarch
=Sum: Documentation Module for GnuCash
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check-book likeregister GUI allows you to enter and track bank accounts, stocks, income and even currency trades.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensure balanced books.
This is the documentation module for GnuCash.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-branding-SLED 11.1 1.26 noarch
=Sum: SLED theme configuration
+Des:
<!-- DT:Rich -->
<p>SLED theme configuration for widget and icon themes.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-theme-SLED 11.1 1.29.82 noarch
=Sum: SLED  themes and metathemes for gtk2 and metacity
+Des:
<!-- DT:Rich -->
<p>SLED themes and metathemes for gtk2 and metacity contains several themes in SLED look: Gilouche, GreyGilouche, Synchonicity and SuSE.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-themes 0.1 737.22 noarch
=Sum: Další témata a enginy pro GTK2
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje další témata a enginy pro GTK2 knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-sharp2 0.12 92.42 noarch
=Sum: GtkSourceView bindings for Mono
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for GtkSourceView, a child of the GTK+ text widget which implements syntax highlighting and other features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: handedict 20080423 2.7 noarch
=Sum: Čínsko-německý slovník ve formátu EDICT
+Des:
<!-- DT:Rich -->
<p>This is a free Chinese-German dictionary that can be used, for
example, with Gjiten.
</p><p>
Everyone is invited to help develop it together with the authors (see
URL and e-mail addresses in the author list). It is based in large
parts on CEDICT which in turn has been modelled on Jim Breen&#39;s highly
successful EDICT (Japanese-English dictionary) project.
</p>
-Des:
##----------------------------------------
=Pkg: hicolor-icon-theme 0.10 102.22 noarch
=Sum: Fallback Icon Theme
+Des:
<!-- DT:Rich -->
<p>This is the default fallback theme used by implementations of the icon
theme specification.
</p>
-Des:
##----------------------------------------
=Pkg: ifntarab 1.2.1 409.20 noarch
=Sum: Arabské fonty pro X Window systém
+Des:
<!-- DT:Rich -->
<p>Arabská písma pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: ifntchia 1.2.1 409.20 noarch
=Sum: Čínské fonty pro X window systém
+Des:
<!-- DT:Rich -->
<p>Čínská písma pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: ifntchib 1.2.1 409.20 noarch
=Sum: Velké čínské fonty pro X window systém
+Des:
<!-- DT:Rich -->
<p>Velká čínská písma pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: ifnteuro 1.2.1 409.20 noarch
=Sum: Evropské fonty pro X Window System
+Des:
<!-- DT:Rich -->
<p>Evropské fonty pro X11 (ISO 8859-1, 8859-2, 8859-3, 8859-4, 8859-5/9, 8859-7 a 8859-8 spolu s KOI8-1/GOST19768.74-1).
</p>
-Des:
##----------------------------------------
=Pkg: ifntjapa 1.2.1 409.20 noarch
=Sum: Japonské fonty pro X Window systém
+Des:
<!-- DT:Rich -->
<p>Japonská písma pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: ifntjapb 1.2.1 409.20 noarch
=Sum: Velké japonské fonty pro X Windows systém
+Des:
<!-- DT:Rich -->
<p>Velká japonská písma pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: ikvm 0.40.0.1 10.5.88 noarch
=Sum: A JVM Based on the Mono Runtime
+Des:
<!-- DT:Rich -->
<p>This package provides IKVM.NET, an open source Java compatibility layer for Mono, which includes a Virtual Machine, a bytecode compiler, and various class libraries for Java, as well as tools for Java and Mono interoperability.
</p>
-Des:
##----------------------------------------
=Pkg: indic-fonts 2008.11.13 1.17 noarch
=Sum: Professional Indian Language TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>This package contains many professional Indian language TrueType fonts contributed by the community and some also donated by organizations to open source. All fonts are available under GPL.
</p>
-Des:
##----------------------------------------
=Pkg: info2html 2.0 104.18 noarch
=Sum: Konvertor info stránek do HTML
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje CGI skript info2html, který konvertuje info dokumenty
na HTML stránky.
</p><p>
</p><p>
Vyvoláním z WWW prohlížeče generuje info2html HTML stránku souboru
/usr/share/info/dir
</p><p>
Stačí jednoduše kliknout na odkazy na info uzly a dostanete se
na další HTML stránky.
</p>
-Des:
##----------------------------------------
=Pkg: inst-source-utils 2012.2.3 0.5.1 noarch
=Sum: Utilities for creating customized installation sources
+Des:
<!-- DT:Rich -->
<p>Utilities supporting autoinstallation and creation of customized installation and update sources.
</p><p>
Have a look at http://en.opensuse.org/Inst-source-utils for a detailed description of each script.
</p>
-Des:
##----------------------------------------
=Pkg: intlfnts 1.2.1 409.20 noarch
=Sum: Dokumentace k mezinárodním fontům
+Des:
<!-- DT:Rich -->
<p>Tento balíček neobsahuje žádné fonty, ale pouze soubor README
pro balíčky s mezinárodními fonty:
</p><p>
</p><p>
ifntarab: arabské fonty pro X11
</p><p>
ifntasia: asijské fonty pro X11
</p><p>
ifntchia: čínské fonty pro X11
</p><p>
ifntchib: čínské Big fonty pro X11
</p><p>
ifntethi: etiopské fonty pro X11
</p><p>
ifnteuro: evropské fonty pro X11
</p><p>
ifntjapa: japonské fonty pro X11
</p><p>
ifntjapb: japonské Big fonty pro X11
</p><p>
ifntphon: IPA font pro X11
</p><p>
intlfonts-ttf TrueType písma
</p><p>
intlfonts-bdf Bitmapové fontu užitečné pro tisk
exotických jazyků z Emacsu
</p>
-Des:
##----------------------------------------
=Pkg: intltool 0.40.5 2.6 noarch
=Sum: Překladatelské nástroje
+Des:
<!-- DT:Rich -->
<p>Some scripts to support translators working on GNOME and similar programs.
Data available in XML files (.oaf, .desktop, .sheet, and more) can be extracted into PO files. After translation, the new information is written back into the XML files.
</p>
-Des:
##----------------------------------------
=Pkg: ipadic 2.6.3 76.7 noarch
=Sum: Standardní japonský slovník pro ChaSen
+Des:
<!-- DT:Rich -->
<p>Standardní japonský slovník pro ChaSen.
</p>
-Des:
##----------------------------------------
=Pkg: ipod-sharp 0.8.5 8.5.187 noarch
=Sum: Library for Interacting with Apple iPodŽ Devices
+Des:
<!-- DT:Rich -->
<p>ipod-sharp is a library that allows manipulation of the iTunesDB used in
Apple iPodŽ devices.  Currently it supports adding and removing songs and
manipulating existing play lists.
</p>
-Des:
##----------------------------------------
=Pkg: ipw-firmware 9 1.1.40 noarch
=Sum: Firmware pro bezdrátové karty Intel PRO/Wireless
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje firmware potřebný pro bezdrátové karty Intel PRO/Wireless 2100/2200BG (aka Centrino).
Balíček je distribuován pod licencí společnosti Intel, viz http://ipw2100.sourceforge.net/firmware.php?fid=4
</p>
-Des:
##----------------------------------------
=Pkg: iso-codes 3.3 1.20 noarch
=Sum: ISO Code Lists and Translations
+Des:
<!-- DT:Rich -->
<p>This package provides the ISO-639 language code list, the ISO-3166
territory code list, ISO-3166-2 subterritory lists, and all their
translations in gettext .po form.
</p>
-Des:
##----------------------------------------
=Pkg: iso_ent 2000.11.03 805.14 noarch
=Sum: Sady znakových entit pro ISO 8879:1986
+Des:
<!-- DT:Rich -->
<p>Sady znakových entit pro ISO 8879:1986
</p>
-Des:
##----------------------------------------
=Pkg: jarnal 9.23 1.15 noarch
=Sum: Jarnal is a java based notetaking/sketching application
+Des:
<!-- DT:Rich -->
<p>Jarnal is a java based notetaking/sketching application similar to Microsoft One-Note. For tablet PCs it provides the ability to take handwritten notes; for desktop PCs it allows users to take notes using the mouse (or more sensibly) using the keyboard. Each page is stored in SVG format, and the SVG pages are stored in a standard Zip file.
</p>
-Des:
##----------------------------------------
=Pkg: kde-susetranslations 11.1 14.13.14.103 noarch
=Sum: SUSE KDE Translations
+Des:
<!-- DT:Rich -->
<p>This package contains SUSE-specific translations of KDE3 libraries and applications.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-af 3.5.10 18.6.2 noarch
=Sum: Afrikánské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro afrikánskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ar 3.5.10 18.6.2 noarch
=Sum: Arabské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro pracovní plochu v arabštině. Tento balíček obsahuje
aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ca 3.5.10 18.6.2 noarch
=Sum: Katalánské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro katalánskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-cs 3.5.10 18.6.2 noarch
=Sum: České překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro českou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-da 3.5.10 18.6.2 noarch
=Sum: Dánské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro dánskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-de 3.5.10 18.6.2 noarch
=Sum: Německé překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro německou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-de-data 3.5.10 18.6.2 noarch
=Sum: German Application Data for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains localized application data.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-de-doc 3.5.10 18.6.2 noarch
=Sum: German Manuals for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains translated application manuals.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-en_GB 3.5.10 18.6.2 noarch
=Sum: Anglické (UK) překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro pracovní plochu v britské angličtině. Tento balíček obsahuje
aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-es 3.5.10 18.6.2 noarch
=Sum: Španělské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro španělskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-fi 3.5.10 18.6.2 noarch
=Sum: Finské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro finskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-fr 3.5.10 18.6.2 noarch
=Sum: Francouzské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro francouzskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-hi 3.5.10 18.6.2 noarch
=Sum: Hindské překlady KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Hindi. This package contains
application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-hu 3.5.10 18.6.2 noarch
=Sum: Maďarské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro maďarskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-it 3.5.10 18.6.2 noarch
=Sum: Italské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro italskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ja 3.5.10 18.6.2 noarch
=Sum: Japonské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro japonskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ko 3.5.10 18.6.2 noarch
=Sum: Korejské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro korejskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-nb 3.5.10 18.6.2 noarch
=Sum: Norské (Bokmaal) překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro norskou (Bokmaal) pracovní plochu. Tento balíček obsahuje aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-nl 3.5.10 18.6.2 noarch
=Sum: Holandské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro holandskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-nn 3.5.10 18.6.2 noarch
=Sum: Norské (Nynorsk) překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro norskou (Nynorsk) pracovní plochu. Tento balíček obsahuje aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-pl 3.5.10 18.6.2 noarch
=Sum: Polské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro polskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-pt 3.5.10 18.6.2 noarch
=Sum: Portugalské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro portugalskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-pt_BR 3.5.10 18.6.2 noarch
=Sum: Brazilian Portuguese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro pracovní plochu v brazilské portugalštině. Tento balíček
obsahuje aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-ru 3.5.10 18.6.2 noarch
=Sum: Ruské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro ruskou pracovní plochu. Tento balíček obsahuje aplikace, překlady,
nápovědu a ukázky pracovní plochy.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-sk 3.5.10 18.6.2 noarch
=Sum: Slovenské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro slovenskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-sv 3.5.10 18.6.2 noarch
=Sum: Švédské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro švédskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-zh_CN 3.5.10 18.6.2 noarch
=Sum: Simplified Chinese Translations for KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro pracovní plochu ve zjednodušené čínštině. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n-zh_TW 3.5.10 18.6.2 noarch
=Sum: Čínské překlady pro KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro čínskou pracovní plochu. Tento balíček obsahuje aplikace,
překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ar 4.3.5 0.2.58 noarch
=Sum: Arabic (ar) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Arabic. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ca 4.3.5 0.2.58 noarch
=Sum: Catalan (ca) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Catalan. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-cs 4.3.5 0.2.58 noarch
=Sum: Czech (cs) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in czech. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-da 4.3.5 0.2.58 noarch
=Sum: Danish (da) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Danish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-da-data 4.3.5 0.2.58 noarch
=Sum: Danish (da) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Danish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-da-doc 4.3.5 0.2.58 noarch
=Sum: Danish (da) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Danish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-de 4.3.5 0.2.58 noarch
=Sum: German (de) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in german. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-de-data 4.3.5 0.2.58 noarch
=Sum: German (de) Application Data for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains localized application data.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-de-doc 4.3.5 0.2.58 noarch
=Sum: German (de) Manuals for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains application manual translations.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-en_GB 4.3.5 0.2.58 noarch
=Sum: British English (en_GB) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in British English. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-es 4.3.5 0.2.58 noarch
=Sum: Spanish (es) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in spanish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-es-data 4.3.5 0.2.58 noarch
=Sum: Spanish (es) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in spanish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-es-doc 4.3.5 0.2.58 noarch
=Sum: Spanish (es) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in spanish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-fi 4.3.5 0.2.58 noarch
=Sum: Finish (fi) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Finish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-fr 4.3.5 0.2.58 noarch
=Sum: French (fr) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in French. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-fr-data 4.3.5 0.2.58 noarch
=Sum: French (fr) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in French. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-fr-doc 4.3.5 0.2.58 noarch
=Sum: French (fr) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in French. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-hi 4.3.5 0.2.58 noarch
=Sum: Hindi (hi) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Hindi. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-hu 4.3.5 0.2.58 noarch
=Sum: Hungarian (hu) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in hungarian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-it 4.3.5 0.2.58 noarch
=Sum: Italian (it) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in italian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-it-data 4.3.5 0.2.58 noarch
=Sum: Italian (it) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in italian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-it-doc 4.3.5 0.2.58 noarch
=Sum: Italian (it) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in italian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ja 4.3.5 0.2.58 noarch
=Sum: Japanese (ja) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in japanese. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ko 4.3.5 0.2.58 noarch
=Sum: Korean (ko) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Korean. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-nb 4.3.5 0.2.58 noarch
=Sum: Norwegian Bokmĺl (nb) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Norwegian Bokmĺl. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-nl 4.3.5 0.2.58 noarch
=Sum: Dutch (nl) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Dutch. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-nl-data 4.3.5 0.2.58 noarch
=Sum: Dutch (nl) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Dutch. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-nl-doc 4.3.5 0.2.58 noarch
=Sum: Dutch (nl) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Dutch. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-nn 4.3.5 0.2.58 noarch
=Sum: Nynorsk translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop is Nynorsk. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pl 4.3.5 0.2.58 noarch
=Sum: Poliosh (pl) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Polish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pl-data 4.3.5 0.2.58 noarch
=Sum: Polish (pl) Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Polish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pl-doc 4.3.5 0.2.58 noarch
=Sum: Polish (pl) Translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Polish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pt 4.3.5 0.2.58 noarch
=Sum: Portugese (pt) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in portugese. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pt_BR 4.3.5 0.2.58 noarch
=Sum: Brazilian (pt_BR) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Brazilian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pt_BR-data 4.3.5 0.2.58 noarch
=Sum: Brazilian (pt_BR) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Brazilian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-pt_BR-doc 4.3.5 0.2.58 noarch
=Sum: Brazilian (pt_BR) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in Brazilian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ru 4.3.5 0.2.58 noarch
=Sum: Russian (ru) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in russian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ru-data 4.3.5 0.2.58 noarch
=Sum: Russian (ru) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in russian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-ru-doc 4.3.5 0.2.58 noarch
=Sum: Russian (ru) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in russian. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-sv 4.3.5 0.2.58 noarch
=Sum: Swedish (sv) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in swedish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-sv-data 4.3.5 0.2.58 noarch
=Sum: Swedish (sv) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in swedish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-sv-doc 4.3.5 0.2.58 noarch
=Sum: Swedish (sv) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in swedish. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-zh_CN 4.3.5 0.2.58 noarch
=Sum: Chinese simplified (zh_CN) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in simplified Chinese. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-zh_TW 4.3.5 0.2.58 noarch
=Sum: Chinese traditional (zh_TW) translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in traditional chinese. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kdeaccessibility4-icons 4.3.5 0.1.74 noarch
=Sum: Monochrome Icon Set for KDE
+Des:
<!-- DT:Rich -->
<p>This package contains a monochrome icon set for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4-desktopthemes 4.3.5 0.3.31 noarch
=Sum: kdeartwork base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4-wallpapers 4.3.5 0.3.31 noarch
=Sum: Wallpapers package
+Des:
<!-- DT:Rich -->
<p>This package contains the wallpapers which originate from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4-weatherwallpapers 4.3.5 0.3.31 noarch
=Sum: kdeartwork base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-wallpapers 4.3.5 0.8.40 noarch
=Sum: KDE 4 Wallpapers
+Des:
<!-- DT:Rich -->
<p>This package contains the wallpapers of KDE 4.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks-default 4.3.5 0.1.60 noarch
=Sum: Default Card Decks for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains the default card deck set for KDE games.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks-other 4.3.5 0.1.60 noarch
=Sum: Further Card Decks for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains several further card deck set for KDE games.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-firmware 20110923 0.7.63 noarch
=Sum: Linux kernel firmware files
+Des:
<!-- DT:Rich -->
<p>This package contains the firmware for in-kernel drivers that was previously
included in the kernel. It is shared by all kernels &gt;= 2.6.27-rc1.
</p>
-Des:
##----------------------------------------
=Pkg: laptop-mode-tools 1.41 52.35.2 noarch
=Sum: The Laptop Mode Tools
+Des:
<!-- DT:Rich -->
<p>Laptop Mode Tools is a laptop power saving package for Linux systems. It allows you to extend the battery life of your laptop, in several ways. It is the primary way to enable the Laptop Mode feature of the Linux kernel, which lets your hard drive spin down. In addition, it allows you to tweak a number of other power-related settings using a simple configuration file.
</p>
-Des:
##----------------------------------------
=Pkg: latex2html-pngicons 2002.2.1 604.31 noarch
=Sum: Ikony v PNG pro konvertor LaTeX2HTML
+Des:
<!-- DT:Rich -->
<p>Icony v PNG formátu pro konvertor LaTeXu na HTML.
</p>
-Des:
##----------------------------------------
=Pkg: liberation-fonts 1.06.0.20100721 6.5.10 noarch
=Sum: Liberation Fonts
+Des:
<!-- DT:Rich -->
<p>Free fonts which are metric compatible to &quot;Arial&quot;, &quot;Times New Roman&quot;
and &quot;Courier New&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-branding-SLED 3.3.1 0.3.1 noarch
=Sum: SLED Branding for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package includes the SLED branding for the LibreOffice office
suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-converter 3.3 1.7.2 noarch
=Sum: Commandline Document Converter Using LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package includes a simple script ooconvert that can be used to
convert various document file formats on the commandline. It uses
LibreOffice that guarantees the quality and the variety of available
document file formats.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-cs 3.4.2.6 0.14.3 noarch
=Sum: Czech Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Czech help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-cs.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-da 3.4.2.6 0.14.3 noarch
=Sum: Danish Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Danish help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-da.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-de 3.4.2.6 0.14.3 noarch
=Sum: German Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
German help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-de.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-en-GB 3.4.2.6 0.14.3 noarch
=Sum: British Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
British help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-en-GB.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-en-US 3.4.2.6 0.14.3 noarch
=Sum: American Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
American help localization for LibreOffice. The other localized stuff
is in LibreOffice-l10n-en-US.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-es 3.4.2.6 0.14.3 noarch
=Sum: Spanish Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Spanish help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-es.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-fr 3.4.2.6 0.14.3 noarch
=Sum: French Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
French help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-fr.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-gu-IN 3.4.2.6 0.14.3 noarch
=Sum: Gujarati Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Gujarati help localization for LibreOffice. The other localized stuff
is in LibreOffice-l10n-gu-IN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-hi-IN 3.4.2.6 0.14.3 noarch
=Sum: Hindi Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Hindi help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-hi-IN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-hu 3.4.2.6 0.14.3 noarch
=Sum: Hungarian Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Hungarian help localization for LibreOffice. The other localized stuff
is in LibreOffice-l10n-hu.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-it 3.4.2.6 0.14.3 noarch
=Sum: Italian Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Italian help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-it.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-ja 3.4.2.6 0.14.3 noarch
=Sum: Japanese Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Japanese help localization for LibreOffice. The other localized stuff
is in LibreOffice-l10n-ja.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-ko 3.4.2.6 0.14.3 noarch
=Sum: Korean Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Korean help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-ko.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-nl 3.4.2.6 0.14.3 noarch
=Sum: Dutch Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Dutch help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-nl.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-pl 3.4.2.6 0.14.3 noarch
=Sum: Polish Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Polish help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-pl.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-pt 3.4.2.6 0.14.3 noarch
=Sum: Portuguese Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Portuguese help localization for LibreOffice. The other localized stuff
is in LibreOffice-l10n-pt.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-pt-BR 3.4.2.6 0.14.2 noarch
=Sum: Brazilian Portuguese Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Brazilian Portuguese help localization for LibreOffice. The other
localized stuff is in LibreOffice-l10n-pt-BR.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-ru 3.4.2.6 0.14.2 noarch
=Sum: Russian Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Russian help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-ru.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-sv 3.4.2.6 0.14.2 noarch
=Sum: Swedish Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Swedish help localization for LibreOffice. The other localized stuff is
in LibreOffice-l10n-sv.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-zh-CN 3.4.2.6 0.14.2 noarch
=Sum: Chinese Simplified Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Chinese simplified help localization for LibreOffice. The other
localized stuff is in LibreOffice-l10n-zh-CN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-zh-TW 3.4.2.6 0.14.2 noarch
=Sum: Chinese Traditional Help Localization for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Chinese traditional help localization for LibreOffice. The other
localized stuff is in LibreOffice-l10n-zh-TW.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-hyphen 20110217 0.3.1 noarch
=Sum: Hyphen Dictionaries for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
These dictionaries help you to hyphenate texts and words in the
LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-icon-themes 3.4.2.6 0.8.9 noarch
=Sum: Icon Themes for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides various icon themes for the LibreOffice office
suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-af 3.4.2.6 0.7.9 noarch
=Sum: Afrikánské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
African localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-ar 3.4.2.6 0.7.9 noarch
=Sum: Arabské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Arabic localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-ar.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-ca 3.4.2.6 0.7.9 noarch
=Sum: Catalan Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Catalan localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-cs 3.4.2.6 0.7.9 noarch
=Sum: České lokalizacační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Czech localization files for LibreOffice. The localized help content is
in the package LibreOffice-help-cs.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-da 3.4.2.6 0.7.9 noarch
=Sum: Dánské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Danish localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-da.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-de 3.4.2.6 0.7.9 noarch
=Sum: German Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
German localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-de.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-en-GB 3.4.2.6 0.7.9 noarch
=Sum: British Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
British localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-en-GB.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-es 3.4.2.6 0.7.9 noarch
=Sum: Spanish Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Spanish localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-es.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-fi 3.4.2.6 0.7.9 noarch
=Sum: Finnish Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Finnish localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-fr 3.4.2.6 0.7.9 noarch
=Sum: French Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
French localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-fr.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-gu-IN 3.4.2.6 0.7.9 noarch
=Sum: Gujarati Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Gujarati localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-gu-IN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-hi-IN 3.4.2.6 0.7.9 noarch
=Sum: Hindi lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Hindi localization files for LibreOffice. The localized help content is
in the package LibreOffice-help-hi-IN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-hu 3.4.2.6 0.7.9 noarch
=Sum: Hungarian Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Hungarian localization files for LibreOffice. The localized help
content is in the package LibreOffice-help-hu.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-it 3.4.2.6 0.7.9 noarch
=Sum: Italian Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Italian localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-it.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-ja 3.4.2.6 0.7.9 noarch
=Sum: Japonské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Japanese localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-ja.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-ko 3.4.2.6 0.7.9 noarch
=Sum: Korejské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Korean localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-ko.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-nb 3.4.2.6 0.7.9 noarch
=Sum: Norwegian Bokmaal Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Norwegian Bokmaal localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-nl 3.4.2.6 0.7.9 noarch
=Sum: Dutch Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Dutch localization files for LibreOffice. The localized help content is
in the package LibreOffice-help-nl.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-nn 3.4.2.6 0.7.9 noarch
=Sum: Norwegian Nynorsk Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Norwegian Nynorsk localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-pl 3.4.2.6 0.7.9 noarch
=Sum: Polské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Polish localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-pl.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-pt 3.4.2.6 0.7.9 noarch
=Sum: Portugalské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Portuguese localization files for LibreOffice. The localized help
content is in the package LibreOffice-help-pt.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-pt-BR 3.4.2.6 0.7.9 noarch
=Sum: Brazilian Portuguese Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Brazilian Portuguese localization files for LibreOffice. The localized
help content is in the package LibreOffice-help-pt-BR.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-ru 3.4.2.6 0.7.9 noarch
=Sum: Ruské lokalizační soubory pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
Russian localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-ru.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-sk 3.4.2.6 0.7.9 noarch
=Sum: Slovak Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p>Slovenské lokalizační soubory pro OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-sv 3.4.2.6 0.7.9 noarch
=Sum: Swedish Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Swedish localization files for LibreOffice. The localized help content
is in the package LibreOffice-help-sv.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-xh 3.4.2.6 0.7.9 noarch
=Sum: Xhosa Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Xhosa localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-zh-CN 3.4.2.6 0.7.9 noarch
=Sum: Chinese Simplified Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Chinese simplified localization files for LibreOffice. The localized
help content is in the package LibreOffice-help-zh-CN.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-zh-TW 3.4.2.6 0.7.9 noarch
=Sum: Chinese Traditional Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Chinese traditional localization files for LibreOffice. The localized
help content is in the package LibreOffice-help-zh-TW.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n-zu 3.4.2.6 0.7.9 noarch
=Sum: Zulu Localization Files for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
Zulu localization files for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool 1.4 2.5.10 noarch
=Sum: Language Checker for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides the language checker extension for LibreOffice.
It allows to detect errors that a simple spell checker cannot detect,
e.g. mixing up there/their, no/now etc. It can also detect some grammar
mistakes. It does not include spell checking.
</p><p>
The language checker uses special dictionaries that are provided by the
LibreOffice-LanguageTool-&lt;lang&gt; packages.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-de 1.4 2.5.10 noarch
=Sum: German Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The German dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-en 1.4 2.5.10 noarch
=Sum: English Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The English dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-es 1.4 2.5.10 noarch
=Sum: Spanish Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The Spanish dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-fr 1.4 2.5.10 noarch
=Sum: French Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The French dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-it 1.4 2.5.10 noarch
=Sum: Italian Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The Italian dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-nl 1.4 2.5.10 noarch
=Sum: Dutch Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The Dutch dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-pl 1.4 2.5.10 noarch
=Sum: Polish Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The Polish dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-languagetool-sv 1.4 2.5.10 noarch
=Sum: Swedish Dictionary for LibreOffice Language Tool
+Des:
<!-- DT:Rich -->
<p></p><p>
The Swedish dictionary that can be used to check grammar and other more
complex mistakes using the LibreOffice language tool extension.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-openclipart 3.4 0.6.9 noarch
=Sum: Dodatečné galerie pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains an extensive set of extra galleries for
LibreOffice. It can be used to enrich documents with graphics arts.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-de 3.3 1.3.1 noarch
=Sum: German Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p>Sbírka německých šablon pro OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-en 3.3 1.3.1 noarch
=Sum: English Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
A collection of english templates for LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-labels-a4 1.0.1 1.4.1 noarch
=Sum: A4 Size Label Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
A collection of A4 size label templates for LibreOffice. They are
intended for Europe and Asia.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-labels-letter 1.0.1 1.4.1 noarch
=Sum: Letter Size Label Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
A collection of letter size label templates for LibreOffice. They are
intended for US.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-presentation-layouts 3.3 1.3.1 noarch
=Sum: Presentation Layout Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains a collection of presentation layout templates for
LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-cs 20070913.1 0.4.1 noarch
=Sum: Czech Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Czech thesaurus dictionary that can be used to look up for synonyms
and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-de 20080406.1 0.4.1 noarch
=Sum: German Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The German thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-en 20060111.1 0.4.1 noarch
=Sum: English Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The English thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-es 20050720.1 0.4.1 noarch
=Sum: Spanish Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Spanish thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-fr 20060511.1 0.4.1 noarch
=Sum: French Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The French thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-hu 20080319.1 0.4.1 noarch
=Sum: Hungarian Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Hungarian thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-nb 20080310.1 0.4.1 noarch
=Sum: Norwegian Bokmaal Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Norwegian Bokmaal thesaurus dictionary that can be used to look up
for synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-pl 20061223.1 0.4.1 noarch
=Sum: Polish Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Polish thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-pt 20060817.1 0.4.1 noarch
=Sum: Portuguese Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Portuguese thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-ru 20061016.1 0.4.1 noarch
=Sum: Russian Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Russian thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-sk 20080926.1 0.4.1 noarch
=Sum: Slovak Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Slovak thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus-sv 20080609.1 0.4.1 noarch
=Sum: Swedish Thesaurus Dictionary for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Swedish thesaurus dictionary that can be used to look up for
synonyms and related words in the LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: licenses 20070810 2.15 noarch
=Sum: License collection as found in the packages of SuSE Linux
+Des:
<!-- DT:Rich -->
<p>Licenses is a collection of license texts found in the packages of a SuSE Linux distribution.
The files are installed at /usr/share/doc/licenses
Other packages are encouraged to symlink to this location, instead of having a fulltext copy of a license in the packages.
</p>
-Des:
##----------------------------------------
=Pkg: linux-kernel-headers 2.6.32 1.4.13 noarch
=Sum: Linux Kernel Headers
+Des:
<!-- DT:Rich -->
<p>This package provides Linux kernel headers, the kernel API description required for compilation of almost all programs. This is the userspace interface; compiling external kernel modules requires kernel-source instead.
</p>
-Des:
##----------------------------------------
=Pkg: lklug 0.3 2.9 noarch
=Sum: "Lanka Linux User Group" OpenType font for Sinhala
+Des:
<!-- DT:Rich -->
<p>&quot;Lanka Linux User Group&quot; OpenType font for Sinhala copyright 2004 by
Yannis Haralambous.  OTF tables added by Anuradha Ratnaweera an d
Harshani Devadithya, and modified by Harshula Jayasuriya. &quot;Kunddaliya&quot;
glyph Copyright (c) 2006 Harshula Jayasuriya
</p>
-Des:
##----------------------------------------
=Pkg: log4net 1.2.10 1.36 noarch
=Sum: A .NET framework for logging
+Des:
<!-- DT:Rich -->
<p>log4net is a tool to help the programmer output log statements to a variety of output targets. log4net is a port of the excellent log4j framework to the .NET runtime
</p>
-Des:
##----------------------------------------
=Pkg: lsb-release 2.0 1.2.18 noarch
=Sum: Základ pro Linux Standard Base
+Des:
<!-- DT:Rich -->
<p>Potřebné nástroje, odkazy a závislosti pro LSB (Linux Standard Base).
</p>
-Des:
##----------------------------------------
=Pkg: m17n-contrib 1.1.6 1.16 noarch
=Sum: A collection of contributed works to be used with the m17n library
+Des:
<!-- DT:Rich -->
<p>A collection of contributed works to be used with the m17n library,
mainly additional Indic input methods.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-db 1.5.1 1.22 noarch
=Sum: Database Needed by the m17n Library m17n-lib
+Des:
<!-- DT:Rich -->
<p>Database that is needed by the m17n library &quot;m17n-lib&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: malaga-suomi 1.1 2.26 noarch
=Sum: Description of Finnish Morphology Written in Malaga
+Des:
<!-- DT:Rich -->
<p>Suomi-Malaga is a description of Finnish morphology written in Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages 3.15 2.21.1 noarch
=Sum: Linux  Manual Pages
+Des:
<!-- DT:Rich -->
<p>A large collection of man pages (documentation) from the Linux
Documentation Project (LDP).  The man pages are organized into the
following sections: Section 1, user commands (intro only); Section 2,
system calls; Section 3, libc calls; Section 4, devices (e.g., hd,
sd); Section 5, file formats and protocols (e.g., wtmp, /etc/passwd,
nfs); Section 6, games (intro only); Section 7, conventions, macro
packages, etc. (e.g., nroff, ascii); and Section 8, system
administration (intro only).
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-cs 0.17.20080113 1.17 noarch
=Sum: Czech Manual Pages
+Des:
<!-- DT:Rich -->
<p>This package contains the Czech manual pages.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-it 2.65 420.6 noarch
=Sum: LDP Man Pages (Italian)
+Des:
<!-- DT:Rich -->
<p>Manuálové stránky z Linux Documentation Project v italštině.
Obvykle jsou starší než než anglické verze. Pro referenci musíte
používat anglické verze.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ja 20070615 2.19 noarch
=Sum: Manuálové stránky z projektu LDP (v japonštině)
+Des:
<!-- DT:Rich -->
<p>Japonské manuálové stránky z Linuxového dokumentačního projektu LDP.
Mohou být starší než anglická verze, proto pro referenční účely
používejte anglickou verzi.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ko 20050219 1.17 noarch
=Sum: Manuálové stránky z projektu LDP v korejštině
+Des:
<!-- DT:Rich -->
<p>Korejské LPD manuálové stránky.
Mohou být starší než anglická verze, proto pro referenční účely
používejte anglickou verzi.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ru 0.98 3.7 noarch
=Sum: LDP man Pages (Russian)
+Des:
<!-- DT:Rich -->
<p>These are the Russian man pages of the Linux Documentation Project.
Note that they are normally older than the English versions.  You should use the English versions as a reference.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-zh_CN 1.5 2.8 noarch
=Sum: Chinese translation of man pages from the CMPP project
+Des:
<!-- DT:Rich -->
<p>Chinese translation of man pages from the CMPP project
</p>
-Des:
##----------------------------------------
=Pkg: manufacturer-PPDs 10.2 243.31 noarch
=Sum: PPD soubory od výrobců tiskáren
+Des:
<!-- DT:Rich -->
<p>PPD soubory od výrobců tiskáren uveřejněné pod svobodnou licencí.
</p><p>
Například původní MIT licence uvedená v příkladu http://www.opensource.org/licenses/mit-license.php
je dobrá, ale nepříliš často používaná varianta MIT licence,
která nepovoluje redistribuci souborů odlišných od originálního souboru.
</p><p>
Pokud máte postscriptovou tiskárnu a tento balíček k neobsahuje žádný PPD soubor, požádejte o PPD soubor výrobce své tiskárny nebo navštivte
http://www.linuxprinting.org/ppd-doc.html
</p>
-Des:
##----------------------------------------
=Pkg: marble-data 4.3.5 0.2.26 noarch
=Sum: Generic map viewer data
+Des:
<!-- DT:Rich -->
<p>Marble is a viewer of map data. This package contains its data.
</p>
-Des:
##----------------------------------------
=Pkg: media-player-info 14 2.5.71 noarch
=Sum: Media Player Information
+Des:
<!-- DT:Rich -->
<p>This package contains a repository of data files describing media player
(mostly USB Mass Storage ones) capabilities. These files contain information
about the directory layout to use to add music to these devices, about the
supported file formats, ... These capabilities used to be provided by HAL
in the 10-usb-music-players.fdi file but had to be moved elsewhere as part
of the big HALectomy.
</p>
-Des:
##----------------------------------------
=Pkg: metacity-themes 0.1 688.32 noarch
=Sum: Témata pro správce oken Metacity
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje témata pro Metacity.
</p>
-Des:
##----------------------------------------
=Pkg: mikachan-fonts 9.1.2006.08.09 165.17 noarch
=Sum: Volně dostupná japonská písma v "ručním" stylu od Mika-Chan
+Des:
<!-- DT:Rich -->
<p>Volně dostupná japonská písma v &quot;ručním&quot; stylu od Mika-Chan.
</p>
-Des:
##----------------------------------------
=Pkg: mono-addins 0.5 6.5.188 noarch
=Sum: Mono Addins Framework
+Des:
<!-- DT:Rich -->
<p>Mono.Addins is a generic framework for creating extensible applications,
and for creating libraries which extend those applications.
</p>
-Des:
##----------------------------------------
=Pkg: mono-basic 2.6.2 5.5.92 noarch
=Sum: Mono's VB Runtime
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono&#39;s VB runtime.
</p>
-Des:
##----------------------------------------
=Pkg: mono-tools 2.6.2 5.5.198 noarch
=Sum: Collection of Tools and Utilities for Mono
+Des:
<!-- DT:Rich -->
<p>Mono Tools je sbírka nástrojů pro vývoj a testování programů
napsaných v Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-zeroconf 0.9.0 1.2.93 noarch
=Sum: A cross platform Zero Configuration Networking library for Mono
+Des:
<!-- DT:Rich -->
<p>Mono.Zeroconf is a cross platform Zero Configuration Networking library for Mono and .NET. It provides a unified API for performing the most common zeroconf operations on a variety of platforms and subsystems: all the operating systems supported by Mono and both the Avahi and Bonjour/mDNSResponder transports.
</p>
-Des:
##----------------------------------------
=Pkg: mono-zeroconf-provider-avahi 0.9.0 1.2.93 noarch
=Sum: A cross platform Zero Configuration Networking library for Mono
+Des:
<!-- DT:Rich -->
<p>Mono.Zeroconf is a cross platform Zero Configuration Networking library for Mono and .NET. It provides a unified API for performing the most common zeroconf operations on a variety of platforms and subsystems: all the operating systems supported by Mono and both the Avahi and Bonjour/mDNSResponder transports.
</p>
-Des:
##----------------------------------------
=Pkg: monodevelop 2.4.2 1.5.183 noarch
=Sum: A Full-Featured IDE for Mono and Gtk#
+Des:
<!-- DT:Rich -->
<p>MonoDevelop is intended to be a
full-featured integrated development environment (IDE) for
mono and Gtk#. It was originally a port of SharpDevelop
0.98. See http://monodevelop.com/ for more information.
</p>
-Des:
##----------------------------------------
=Pkg: multi-update-tools 0.0.1 0.3.3 noarch
=Sum: Manage two copies of the system for easy recovery after failed update
+Des:
<!-- DT:Rich -->
<p>Tools for managing two copies of the system for easy recovery after failed update
</p><p>
</p><p>
</p><p>
Authors:
<hr>
Jiri Srain &lt;jsrain@suse.cz&gt;
</p>
-Des:
##----------------------------------------
=Pkg: myspell-african 20060117 8.21.1 noarch
=Sum: Afrikánský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Afrikánský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-american 20060207 8.21.1 noarch
=Sum: Americký slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Americký slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-brazilian 20070606 8.21.1 noarch
=Sum: Brazilský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Brazilský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-british 20050526 8.21.1 noarch
=Sum: Britský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Britský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-catalan 0.1 8.21.1 noarch
=Sum: Katalánský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Katalánský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-czech 20060303 8.21.1 noarch
=Sum: Český slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Český slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-danish 20080314 8.21.1 noarch
=Sum: Dánský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Dánský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-dutch 20070603 8.21.1 noarch
=Sum: Dutch Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Nizozemský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-french 20060914 8.21.1 noarch
=Sum: French Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Francouzský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-german 20071211 8.21.1 noarch
=Sum: German Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Německá slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-gujarati 20060929 8.21.1 noarch
=Sum: Gujarati Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Gujarati dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-hindi 0.1 8.21.1 noarch
=Sum: Hindi Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Hindi dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-hungarian 20080315 8.21.1 noarch
=Sum: Maďarský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Maďarský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-italian 20050711 8.21.1 noarch
=Sum: Italian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Italský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-norsk-bokmaal 20080310 8.21.1 noarch
=Sum: Norwegian Bokmaal Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Norský Bokmaal slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-norsk-nynorsk 20080310 8.21.1 noarch
=Sum: Norwegian Nynorsk Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Norský Nynorsk slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-polish 20080514 8.21.1 noarch
=Sum: Polský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Polský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-portuguese 20020629 8.21.1 noarch
=Sum: Portugalský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Portugalský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-russian 20040406 8.21.1 noarch
=Sum: Ruský slovník pro MySpell
+Des:
<!-- DT:Rich -->
<p>Ruský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-slovak 20060724 8.21.1 noarch
=Sum: Slovak Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Slovenský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-spanish 20051029 8.21.1 noarch
=Sum: Spanish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Španělský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-swedish 20080821 8.21.1 noarch
=Sum: Swedish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Švédský slovník pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-xhosa 20060123 8.21.1 noarch
=Sum: Xhosa Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Xhosa dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-zulu 20060120 8.21.1 noarch
=Sum: Zulu Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Zulu dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: nant 0.86_beta1 37.34 noarch
=Sum: Ant pro .NET
+Des:
<!-- DT:Rich -->
<p>NAnt is a free .NET build tool. In theory it is kind of like make without
make&#39;s wrinkles. In practice it&#39;s a lot like Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ndesk-dbus 0.6.0 1.34 noarch
=Sum: Managed C# implementation of D-Bus
+Des:
<!-- DT:Rich -->
<p>This is a C# implementation of D-Bus. It&#39;s often referred to as &quot;managed
D-Bus&quot; to avoid confusion with existing bindings (which wrap libdbus).
</p><p>
It is a clean-room implementation based on the D-Bus Specification
Version 0.11 and study of the wire protocol of existing tools.
</p>
-Des:
##----------------------------------------
=Pkg: ndesk-dbus-glib 0.4.1 1.34 noarch
=Sum: Ndesk-dbus-glib provides glib integration for NDesk.DBus
+Des:
<!-- DT:Rich -->
<p>Ndesk-dbus-glibl provides glib integration for NDesk.DBus
</p>
-Des:
##----------------------------------------
=Pkg: netcfg 11.2 0.5.2 noarch
=Sum: Síťové konfigurační soubory v adresáři /etc
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje všechny základní konfigurační soubory pro síťové
programy včetně /etc/inetd.conf, /etc/protocols a /etc/services.
</p><p>
Tyto soubory jsou často používány síťovými funkcemi z knihovny libc, a
proto musí být nainstalovány pro používání prakticky jakéhokoli síťového
programu.
</p>
-Des:
##----------------------------------------
=Pkg: novell-client-doc 1.0.0 0.7.28 noarch
=Sum: Novell Client for Linux
+Des:
<!-- DT:Rich -->
<p>The Novell Client for Linux workstation software extends the capabilities of a Linux desktop by providing access to NetWare and Open Enterprise Servers (OES).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>Novell Client(TM) 2 for SUSE(R) Linux Enterprise 11
Licen?n? smlouva k softwaru Novell(R) 
</p><p>
P?E?T?TE SI POZORN? TUTO SMLOUVU. INSTALAC?, STA?EN?M NEBO JIN?M
POU??V?N?M SOFTWARU VYJAD?UJETE SOUHLAS S?TOUTO SMLOUVOU. POKUD S
T?MITO PODM?NKAMI NESOUHLAS?TE, SOFTWARE NESTAHUJTE, NEINSTALUJTE ANI
NEPOU??VEJTE. JE-LI TO MO?N?, VRA?TE V?TAKOV?M P??PAD? NEPOU?IT?
BALEN? PRODEJCI SPOLU S?DOKLADEM O?KOUPI, A?OBDR??TE N?HRADU. SOFTWARE
NESM? B?T PROD?N, POSTOUPEN ANI D?LE ???EN BEZ SOUHLASU SPOLE?NOSTI
NOVELL. 
</p><p>
Tato licen?n? smlouva k?softwaru Novell (&quot;Smlouva&quot;) je pr?vn? smlouva
mezi v?mi (subjektem nebo osobou) a?spole?nost? Novell,?Inc.
(&quot;Novell&quot;). Softwarov? produkt uveden? v?n?zvu t?to Smlouvy, m?dia a
doprovodn? dokumentace (souhrnn?m ozna?en?m &quot;Software&quot;) jsou chr?n?ny
autorsk?mi pr?vy a??mluvami Spojen?ch st?t? americk?ch (&quot;USA&quot;) a
dal??ch zem? a?vztahuj? se na n? podm?nky t?to Smlouvy. V?echny
aktualizace a podp?rn? verze Softwaru, kter? m??ete st?hnout ?i z?skat
a kter? nejsou doprov?zeny licen?n? smlouvou v?slovn? nahrazuj?c? tuto
Smlouvu, jsou pova?ov?ny za Software a ??d? se touto Smlouvou. Pokud
je Software aktualizac? nebo podp?rnou verz?, mus?te m?t pro instalaci
a?pou??v?n? aktualizace nebo podp?rn? verze platnou licenci k?p?vodn?
verzi a?po?tu u?ivatel? Softwaru.  
</p><p>
Software m??e b?t dod?v?n jako sou??st jin?ch softwarov?ch program?
nebo v?kombinaci s?nimi. Na?tyto jin? softwarov? programy se?mohou
vztahovat jin? licen?n? podm?nky a?mohou b?t licencov?ny jin?m
poskytovatelem licence ne? spole?nost? Novell. Pou?it? jak?chkoli
softwarov?ch program? se?samostatnou licen?n? smlouvou se???d? touto
samostatnou licen?n? smlouvou. Pokud je se Softwarem dod?v?n jak?koli
software jin?ho v?robce, je jeho pou??v?n? z?le?itost? va?? volby.  
</p><p>
U?IT? V R?MCI LICENCE 
</p><p>
Komer?n? software. 
</p><p>
Licencov?n?. Spole?nost Novell v?m poskytuje nev?hradn? a
nep?evoditeln? pr?vo k intern?mu kop?rov?n? a pou??v?n? Softwaru na
z?klad? podm?nek t?to smlouvy. 
</p><p>
Zku?ebn? kopie softwaru. Pokud se jedn? o?verzi Softwaru ur?enou k
vyzkou?en? nebo pokud v?m byl software poskytnut za???elem posouzen?,
je?va?e licence k?u?it? Softwaru omezena pouze na intern? vyzkou?en?
Softwaru v?souladu s?podm?nkami nab?dky k?vyzkou?en?, na?jej?m?
z?klad? jste Software obdr?eli. Platnost t?to licence vypr?? za 90?dn?
od?instalace (p??padn? v?jin? lh?t? ur?en? Softwarem). Po?vypr?en?
platnosti licence m??e Software p?estat fungovat. Po vypr?en? lh?ty k
posouzen? mus?te Software p?estat pou??vat, vr?tit do p?vodn?ho stavu
v?echny Softwarem proveden? akce a zcela ho odstranit ze syst?mu.
Software m??e obsahovat mechanismus automatick?ho zablokov?n?, kter?
zabra?uje jeho pou??v?n? po?uplynut? ur?it? lh?ty. M?li byste proto
prov?st z?lohu syst?mu a?p?ijmout dal?? opat?en? proti ztr?t?m soubor?
nebo dat.  
</p><p>
OMEZEN? 
</p><p>
Licen?n? omezen?. Spole?nost Novell si?vyhrazuje v?echna pr?va, kter?
v?m nebyla v?slovn? poskytnuta. Software je?v?m licencov?n pouze pro
vnit?n? pou?it?. Nesm?te (1)?zp?tn? p?ekl?dat, dekompilovat nebo
analyzovat Software mimo rozsah v?slovn? povolen? p??slu?n?mi z?kony.
(2)?Upravovat, m?nit, pronaj?mat, hostitelsky sd?let nebo p?j?ovat
Software, p??padn? d?le postupovat kter?koli z?va?ich pr?v plynouc?ch
z?t?to Smlouvy nebo (4)?p?ev?d?t Software nebo va?e licen?n? pr?va
plynouc? z?t?to smlouvy, a? ji? vcelku nebo ??ste?n?, bez p?semn?ho
povolen? spole?nosti Novell. 
</p><p>
Licence na sady. Pokud se?licence k?pou??v?n? Softwaru vztahuje na
sadu produkt?, m??e produkty v?sad? pou??vat pod jednou licenc? pouze
jeden u?ivatel. Licence k?sad? neumo??uje pou??v?n? jednotliv?ch
produkt? v sad? v?ce u?ivateli, v?p??pad? licencov?n? na z?klad? po?tu
u?ivatel?, nebo pou??v?n? v?ce za??zen?, v?p??pad? licencov?n? na
z?klad? po?tu za??zen? nebo server?. 
</p><p>
Z?ruka inovace. Pokud jste v?r?mci p??slu?n?ho programu spole?nosti
Novell k?tomuto Softwaru zakoupili z?ruku inovace nebo ?dr?by,
oprav?uje v?s z?ruka inovace nebo ?dr?by pouze k?inovaci Softwaru jako
celku a?neoprav?uje v?s k?inovaci programov?ch sou??st?, produkt?
dod?van?ch spolu se Softwarem ani jednotliv?ch produkt?, kter? jsou
sou??st? sady, je-li Software licencov?n jako sada produkt?. Je-li to
povoleno p??slu?nou politikou a programy spole?nosti Novell, m??ete si
samostatn? zakoupit z?ruku inovace pro jednotliv? sou??sti Softwaru. 
</p><p>
Inovace softwaru. Tato ??st se v?s t?k?, pokud jste zakoupili Software
s?cenou zalo?enou na inovac?ch. Pojem &quot;P?vodn? produkt&quot; ozna?uje
produkt, ze?kter?ho prov?d?te inovaci. Opr?vn?n? pou??vat Software
m?te pouze v?p??pad?, ?e jste opr?vn?n?m u?ivatelem P?vodn?ho produktu
a?spl?ujete n?sleduj?c? podm?nky: (1) Z?skali jste pr?vo pou??t
Software v?hradn? za ??elem nahrazen? P?vodn?ho produktu, kter? jste
z?skali leg?ln? cestou a?kter? byl ur?en k?inovaci Softwarem ve smyslu
politiky spole?nosti Novell uplat?ovan? v?okam?iku, kdy jste Software
z?skali; (2) P?vodn? produkt byl nainstalov?n a?pou??v?n v?souladu s
podm?nkami p??slu?n? licen?n? smlouvy; (3) Neprod?te ani jin?m
zp?sobem nep?evedete vlastnictv? P?vodn?ho produktu. 
</p><p>
Podpora. Spole?nost Novell nen? povinna zaji??ovat podporu Softwaru,
pokud si nezakoup?te nab?dku, kter? slu?by podpory v?slovn? zahrnuje.
Pokud si zakoup?te takov? produkt a na slu?by podpory se nebude
nevztahovat ??dn? samostatn? smlouva, poskytov?n? takov?ch slu?eb
podpory (&quot;Slu?by&quot;) se bude ??dit podm?nkami t?to Smlouvy. Dal??
informace ohledn? aktu?ln? nab?dky podpory spole?nosti Novell m??ete
z?skat na?internetov? adrese http://www.novell.com/support. 
</p><p>
VLASTNICTV?  
</p><p>
Nep?ech?z? na?v?s n?rok na?Software ani na jeho vlastnictv?.
Spole?nost Novell a/nebo jej? poskytovatel? licenc? si ponech?vaj?
ve?ker? pr?va, n?roky a pod?l na du?evn?m vlastnictv? Softwaru a
Slu?eb, v?etn? jak?chkoli ?prav a?jejich kopi?. Z?sk?v?te pouze
podm?n?nou licenci k?pou??v?n? Softwaru. 
</p><p>
OMEZEN? Z?RUKA 
</p><p>
Spole?nost Novell po?dobu devades?ti (90) dn? od?zakoupen? zaru?uje,
?e (1)?m?dia, na?nich? je?Software dod?v?n, neobsahuj? fyzick? vady a
(2)?software bude v?podstatn?ch rysech odpov?dat doprovodn?
dokumentaci. Pokud b?hem devades?ti (90) dn? od?zakoupen? Softwaru
vr?t?te spole?nosti Novell vadn? m?dia nebo pokud ve?stejn? dob?
ozn?m?te nesoulad s parametry, spole?nost Novell v?hradn? dle
vlastn?ho uv??en? tento nesoulad vy?e?? nebo v?m vr?t? licen?n?
poplatky zaplacen? za?Software. Jak?koli neopr?vn?n? pou?it? nebo
?pravy Softwaru ru?? platnost t?to z?ruky. P?EDCHOZ? Z?RUKA
P?EDSTAVUJE JEDIN? MO?N? A?V?HRADN? N?PRAVN? KROK A?NAHRAZUJE VE?KER?
DAL?? Z?RUKY, A? JI? V?SLOVN? ?I?VYPL?VAJ?C?. (P?edchoz? z?ruka se
nevztahuje na?Software poskytovan? zdarma. TAKOV? SOFTWARE SE
POSKYTUJE &quot;TAK JAK JE&quot;, BEZ JAK?KOLI Z?RUKY.) 
</p><p>
Slu?by. Spole?nost Novell zaru?uje, ?e jak?koli zakoupen? slu?by budou
poskytnuty profesion?ln?m zp?sobem v souladu s obecn? p?ij?man?mi
standardy v oboru. Tato z?ruka bude platit po dobu 90 dn? od doru?en?
Slu?eb. P?i jak?mkoli poru?en? t?to z?ruky se spole?nost Novell
zavazuje, bu? napravit tyto slu?by tak, aby vyhov?ly t?to z?ruce nebo
podle sv?ho uv??en? nahradit ??stku, kterou jste spole?nosti Novell
zaplatili za ??st slu?eb, kter? t?to z?ruce nevyhovuj?. Proto?e
soubory mohou b?t v pr?b?hu poskytov?n? technick?ch slu?eb spole?nost?
Novell m?n?ny nebo po?kozeny, souhlas?te, ?e p?ijmete p?im??en?
opat?en? k izolov?n? a z?lohov?n? va?ich syst?m?. 
</p><p>
TENTO SOFTWARE NEN? NAVR?EN, VYTV??EN ANI UR?EN K?POU?IT? NEBO
DISTRIBUCI S?ONLINE ??DIC?M VYBAVEN?M PRO?NEBEZPE?N? PROST?ED?
VY?ADUJ?C? BEZCHYBN? PROVOZ, JAKO JSOU PROVOZY S?NUKLE?RN?MI
ZA??ZEN?MI, ??ZEN? LETECK?HO PROVOZU, KOMUNIKA?N? A?KONTROLN? SYST?MY,
ZA??ZEN? PRO PODPORU D?LE?IT?CH ?IVOTN?CH FUNKC?, ZBRA?OV? SYST?MY ANI
PRO JIN? POU?IT?, U?KTER?CH BY P??PADN? SELH?N? SOFTWARU MOHLO P??MO
V?ST K??MRT?, ZRAN?N? NEBO T?K?MU PO?KOZEN? ZDRAV? OSOB, P??PADN? K
PO?KOZEN? ?IVOTN?HO PROST?ED?. 
</p><p>
TENTO SOFTWARE JE?KOMPATIBILN? POUZE S?N?KTER?MI PO??TA?I A?OPERA?N?MI
SYST?MY. NA?SOFTWARE SE NEVZTAHUJE Z?RUKA, JE-LI POU??V?N V
NEKOMPATIBILN?CH SYST?MECH. Chcete-li z?skat informace t?kaj?c? se
kompatibility Softwaru, obra?te se telefonicky na spole?nost Novell
nebo na sv?ho prodejce. 
</p><p>
Produkty jin?ch v?robc?. Software m??e b?t dod?v?n spolu s hardwarem
nebo jin?mi softwarov?mi programy nebo slu?bami licencovan?mi nebo
prod?van?mi jin?mi subjekty ne? spole?nost? Novell. SPOLE?NOST NOVELL
NEPOSKYTUJE Z?RUKU NA PRODUKTY NEBO SLU?BY JIN?CH V?ROBC?. V?ECHNY
TAKOV? PRODUKTY NEBO SLU?BY JSOU POSKYTOV?NY &quot;TAK JAK JSOU&quot;. V?ECHNY
Z?RU?N? OPRAVY PRODUKT? JIN?CH V?ROBC? ZAJI??UJ? POSKYTOVATEL? LICENC?
T?CHTO PRODUKT? V?SOULADU S?PLATNOU Z?RUKOU POSKYTOVATELE LICENCE. 
</p><p>
NEN?-LI Z?KONEM STANOVENO JINAK, SPOLE?NOST NOVELL ODM?T? JAK?KOLI
P?EDPOKL?DAN? Z?RUKY, V?ETN? Z?RUK VZTAHUJ?C?CH SE?K
OBCHODOVATELNOSTI, VHODNOSTI PRO DAN? ??EL, PR?VN?M N?ROK?M NEBO
NEDODR?EN? SMLOUVY. SPOLE?NOST NOVELL NEPOSKYTUJE ??DN? Z?RUKY,
PROHL??EN? ANI Z?VAZKY, KTER? NEJSOU V?SLOVN? UVEDENY V?T?TO OMEZEN?
Z?RUCE. SPOLE?NOST NOVELL NEZARU?UJE, ?E SOFTWARE NEBO SLU?BY SPLN?
VA?E PO?ADAVKY ANI ?E JEJICH PROVOZ BUDE NEP?ERU?OVAN?. N?kter? m?stn?
p??slu?n? soudy neumo??uj? odm?tnut? ur?it?ch z?ruk nebo n?kter?
omezen?, proto je?mo?n?, ?e n?kter? z?v??e uveden?ch omezen? se?na?v?s
nevztahuj?. Omezen? z?ruka v?m d?v? ur?it? pr?va a krom? nich m??ete
m?t i?dal?? pr?va, kter? se li?? v?z?vislosti na st?tu nebo
jurisdikci.  
</p><p>
OMEZEN? ODPOV?DNOSTI 
</p><p>
N?sledn? ztr?ty. SPOLE?NOST NOVELL ANI ??DN? Z?JEJ?CH POSKYTOVATEL?
LICENC?, P?IDRU?EN?CH SPOLE?NOST? NEBO ZAM?STNANC? NENESE ODPOV?DNOST
ZA?JAK?KOLI ZVL??TN?, N?HODN?, N?SLEDN?, NEP??M?, ?MYSLN?, EKONOMICK?
NEBO TRESTN? ?KODY ZP?SOBEN? POU?IT?M SOFTWARU NEBO SLU?EB NEBO
NEMO?NOST? JE POU??T, MIMO JIN? V?ETN? ZTR?TY ZISKU, ?KOD P?I
PODNIK?N? NEBO ZTR?TY DAT, A?TO I?V?P??PAD?, ?E BYLA NA?MO?NOST VZNIKU
TAKOV?CH ?KOD UPOZORN?NA. P??m? ?kody. CELKOV? ODPOV?DNOST SPOLE?NOSTI
NOVELL ZA?P??M? ?KODY NA MAJETKU NEBO OSOBN? ?JMY (A? JI? SE?JEDN? O
JEDEN P??PAD NEBO O??ADU P??PAD?) V???DN?M P??PAD? NEP?ES?HNE
1,25N?SOBEK ??STKY, KTEROU JSTE ZAPLATILI ZA?SOFTWARE NEBO SLU?BY,
KTER? VZNIK N?ROKU ZP?SOBILY (NEBO 50?USD, POKUD JSTE SOFTWARE Z?SKALI
ZDARMA). V??e uveden? vylou?en? a omezen? se?nevztahuj? na?n?roky
souvisej?c? s??mrt?m nebo zran?n?m osob. V?r?mci p?sobnosti soud?,
kter? neumo??uj? vylou?en? nebo omezen? n?hrady ?kody, bude
odpov?dnost spole?nosti Novell omezena nebo vylou?ena v?maxim?ln?m
povolen?m rozsahu. 
</p><p>
V?EOBECN? PODM?NKY 
</p><p>
Doba trv?n?. Tato Smlouva vstupuje v?platnost dnem leg?ln?ho z?sk?n?
Softwaru a?bude automaticky ukon?ena, poru??te-li jakoukoli jej?
podm?nku. Pokud Software z?sk?v?te na z?klad? p?edplatn?ho, kon?? va?e
pr?vo na vlastnictv? a?pou??v?n? Softwaru na konci p?edplacen?ho
obdob?. P?i ukon?en? platnosti t?to Smlouvy nebo p??slu?n?ho
p?edplacen?ho obdob? mus?te zni?it origin?l a?v?echny kopie Softwaru,
p??padn? je?vr?tit spole?nosti Novell. Software mus?te tak? odstranit
ze?v?ech sv?ch syst?m?. 
</p><p>
Testov?n? produktu. Toto omezen? testov?n? produktu se v?s t?k?, jen
pokud jste v?voj?? softwaru nebo poskytovatel licence nebo pokud
prov?d?te testov?n? Softwaru podle pokyn? nebo jm?nem v?voj??e nebo
poskytovatele licence. Bez p?edchoz?ho p?semn?ho svolen? spole?nosti
Novell nesm?te publikovat nebo p?edat v?sledky testov?n? Softwaru
dal?? stran?. Pokud jste poskytovatelem licence produkt?, kter? jsou
funk?n? podobn? nebo konkuruj? softwaru (&quot;Podobn? produkty&quot;), nebo
vystupujete jm?nem takov?ho poskytovatele licence a?zve?ejn?te nebo
p?ed?te informace o?testov?n? Softwaru v?rozporu s?t?mto omezen?m,
potom bez ohledu na jak?koli ustanoven? licen?n? smlouvy koncov?ho
u?ivatele Podobn?ho produktu a?krom? dal??ch n?hrad, kter? m??e
spole?nost Novell po?adovat, m? spole?nost Novell pr?vo prov?st
testov?n? produktu na Podobn?ch produktech a?zve?ejnit a?publikovat
tyto informace o?testov?n? produktu a?vy t?mto prohla?ujete, ?e jste
opr?vn?ni toto pr?vo spole?nosti Novell poskytnout. 
</p><p>
Open Source. ??dn? ustanoven? t?to Smlouvy neomezuje ani jinak
neovliv?uje pr?va, povinnosti a podm?nky, je? se na v?s vztahuj? a
kter? mus?te splnit, vypl?vaj?c? z p??padn?ch licenc? pro programov?
k?d open source obsa?en? v?tomto Softwaru.   P?evod. Tato Smlouva
nesm? b?t p?evedena ani postoupena bez p?edchoz?ho p?semn?ho svolen?
spole?nosti Novell. 
</p><p>
Volba pr?va a jurisdikce. Tato Smlouva se???d? z?kony st?tu Utah, USA.
Ve?ker? pr?vn? akty vztahuj?c? se?k?t?to Smlouv? mohou ?e?it pouze
soudy podle p??slu?n? pr?vn? oblasti st?tu Utah. Pokud se v?ak va?e
hlavn? s?dlo nach?z? v zemi, kter? je??lensk?m st?tem Evropsk? unie
nebo Evropsk?ho sdru?en? voln?ho obchodu (EFTA), ??d? se?tato smlouva
z?kony dan? zem? a?ve?ker? pr?vn? akty vztahuj?c? se?ke?Smlouv? mohou
?e?it pouze soudy v p??slu?n? pr?vn? oblasti t?to zem?. 
</p><p>
?plnost smlouvy. Tato Smlouva potvrzuje ?pln? porozum?n? a?shodu mezi
v?mi a?spole?nost? Novell. M??e b?t dopln?na nebo zm?n?na pouze
p?semnou dohodou mezi v?mi a?opr?vn?n?m z?stupcem spole?nosti Novell.
??DN? POSKYTOVATEL LICENCE, DISTRIBUTOR, DEALER, MALOOBCHODN?K,
OBCHODN? Z?STUPCE ANI ZAM?STNANEC NEN? OPR?VN?N TUTO LICENCI UPRAVOVAT
NEBO POSKYTOVAT JAK?KOLI UJI?T?N? ?I Z?VAZKY NEOBSA?EN? NEBO LI??C? SE
OD PODM?NEK T?TO SMLOUVY. 
</p><p>
Z?eknut? se pr?v. ??dn? z?eknut? se jak?hokoliv pr?va nebude platn?,
pokud nebude v?p?semn? form? s podpisem opr?vn?n?ho z?stupce smluvn?
strany. ??dn? z?eknut? se  jak?hokoli d??v?j??ho nebo sou?asn?ho pr?va
vypl?vaj?c?ho z?poru?en? nebo nedodr?en? Smlouvy nebude pova?ov?no za
z?eknut? se?jak?hokoli budouc?ho pr?va plynouc?ho ze?Smlouvy. 
</p><p>
Klauzule o odd?litelnosti. Stane-li se?jak?koli ustanoven? t?to
Smlouvy neplatn?m nebo ne??inn?m, bude toto ustanoven? interpretov?no,
omezeno, upraveno nebo v?p??pad? pot?eby i?zru?eno v?nezbytn?m
rozsahu, aby bylo zabr?n?no neplatnosti nebo ne??innosti Smlouvy.
Ostatn? ustanoven? Smlouvy z?st?vaj? v?platnosti v?p?vodn?m zn?n?. 
</p><p>
Spln?n? exportn?ch po?adavk?. V?robky nebo technick? ?daje poskytnut?
podle t?to Smlouvy mohou b?t p?edm?tem exportn?ch omezen? USA a
obchodn?ch z?kon? jin?ch zem?. Smluvn? strany se zavazuj? dodr?ovat
ve?ker? exportn? omezen? a?z?skat jak?koli licence nebo exportn?
klasifikace pot?ebn? k?exportu, reexportu nebo importu zbo??. Smluvn?
strany se zavazuj? neexportovat ani nereexportovat subjekt?m uveden?m
v?platn?m seznamu subjekt? vylou?en?ch z?exportu, do zem?, na kter? je
uvaleno embargo, ani do teroristick?ch zem? podle exportn?ch z?kon?
USA. Smluvn? strany nepou?ij? zbo?? pro?zak?zan? jadern?, raketov?
nebo chemick? a?biologick? zbran?. Ne? za?nete z USA vyv??et produkty
spole?nosti Novell, informujte se na webov?ch str?nk?ch ??adu Bureau
of Industry and Security (??ad pro pr?mysl a bezpe?nost,
www.bis.doc.gov). Dal?? informace o?exportu softwaru Novell najdete na
adrese http://www.novell.com/company/legal/. Spole?nost Novell v?m na
po??d?n? poskytne konkr?tn? informace o?platn?ch omezen?ch. Spole?nost
Novell v?ak nenese ??dnou odpov?dnost za v?? ne?sp?ch p?i z?sk?v?n?
n?kter?ho nezbytn?ho povolen? pro export. 
</p><p>
Omezen? pr?va pro vl?du USA. Pou??v?n?, kop?rov?n? nebo p?ed?v?n?
informac? vl?dou USA podl?h? omezen?m uveden?m ve sm?rnic?ch FAR
52.227-14 (?erven?1987) obm?na?III (?erven 1987), FAR?52.227-19
(?erven?1987) nebo DFARS?252.227-7013?(b) (3) (listopad?1995),
p??padn? v?p??slu?n?ch n?sledn?ch klauzul?ch. Dodavatel/V?robce je
Novell,?Inc., 1800?South Novell Place, Provo, Utah?84606.  Jin?.
Uplatn?n? Konvence OSN o?kontraktech pro mezin?rodn? prodej zbo?? je
v?slovn? vylou?eno. 
</p><p>
(c)1993, 2000-2009 Novell,?Inc. V?echna pr?va vyhrazena. (030309) 
</p><p>
Novell a?SUSE jsou registrovan? ochrann? zn?mky a?Novell Client je
ochrann? zn?mka spole?nosti Novell, Inc. ve Spojen?ch st?tech
americk?ch a?dal??ch zem?ch. 
</p>
-Eul:
##----------------------------------------
=Pkg: openclipart-svg 0.18 136.22 noarch
=Sum: Open Clip Art Library in the SVG File Format
+Des:
<!-- DT:Rich -->
<p>An extensive set of clip art graphics that can be used for free.
</p><p>
This package includes the pictures in the original SVG graphics file format.
</p>
-Des:
##----------------------------------------
=Pkg: openssl-certs 0.9.8h 27.3.1 noarch
=Sum: CA certificates for OpenSSL
+Des:
<!-- DT:Rich -->
<p>This package contains some CA root certificates for OpenSSL extracted from MozillaFirefox
</p>
-Des:
##----------------------------------------
=Pkg: oxygen-icon-theme 4.3.5 0.1.65 noarch
=Sum: Oxygen Icon Theme
+Des:
<!-- DT:Rich -->
<p>This package contains the non-scalable icons of the Oxygen icon theme.
</p>
-Des:
##----------------------------------------
=Pkg: oxygen-icon-theme-scalable 4.3.5 0.1.65 noarch
=Sum: Oxygen Icon Theme
+Des:
<!-- DT:Rich -->
<p>This package contains the scalable icons of the Oxygen icon theme.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils-ids 2011.11.24 0.4.1 noarch
=Sum: PCI-utilities pci.ids database
+Des:
<!-- DT:Rich -->
<p>The database of PCI IDS for pciutils.
</p><p>
merge-pciids: This program merges several pci.ids files.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-TokeParser-Simple 3.15 8.6.1 noarch
=Sum: Easy to use HTML::TokeParser interface
+Des:
<!-- DT:Rich -->
<p>HTML::TokeParser::Simple is a subclass of HTML::TokeParser that uses
easy-to-remember method calls to work with the tokens.  Rather than
try to remember a bunch of array indices or try to write a bunch of
constants for them, you can now do something like:
</p><p>
$token-&gt;is_start_tag( &#39;form&#39; )
</p><p>
Instead of
</p><p>
$token-&gt;[0] eq &#39;S&#39; and $token-&gt;[1] eq &#39;form&#39;
</p><p>
Authors:
<hr>
Curtis &quot;Ovid&quot; Poe &lt;poec@yahoo.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: perl-Mail-DKIM 0.39 9.2.2.1 noarch
=Sum: Signs/verifies Internet mail with DKIM/DomainKey signatures
+Des:
<!-- DT:Rich -->
<p>Mail-DKIM is a Perl module that implements the new Domain Keys Identified Mail (DKIM) standard, and the older Yahoo! DomainKeys standard, both of which sign and verify emails using digital signatures and DNS records. Mail-DKIM can be used by any Perl program that wants to provide support for DKIM and/or DomainKeys.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Sub-Override 0.08 6.6.1 noarch
=Sum: Perl extension for easily overriding subroutines
+Des:
<!-- DT:Rich -->
<p>Sometimes subroutines need to be overridden. In fact, your author does
this constantly for tests. Particularly when testing, using a
Mock Object can be overkill when all you want to do is override
one tiny, little function.
</p><p>
Authors:
<hr>
Curtis &quot;Ovid&quot; Poe, &lt;eop_divo_sitruc@yahoo.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: pin 0.38 91.21 noarch
=Sum: Nástroj pro získání informací o balících
+Des:
<!-- DT:Rich -->
<p>Pin - Package InformatioN. Pin prohledává seznam nainstalovaných balíčků (rpm -qi, -ql)
a soubor ARCHIVES.gz k získání potřebných informací. Zobrazuje soubory README,
README.SuSE a FAQ (pokud jsou dostupné).
</p>
-Des:
##----------------------------------------
=Pkg: polkit-default-privs 0.1_200812111413 3.6 noarch
=Sum: SUSE PolicyKit default permissions
+Des:
<!-- DT:Rich -->
<p>Different default privilege settings depending on local
configuration
</p>
-Des:
##----------------------------------------
=Pkg: poppler-data 0.4.0 1.1.38 noarch
=Sum: Encoding Files for use with libpoppler
+Des:
<!-- DT:Rich -->
<p>This package consists of encoding files for use with poppler.  The encoding files are optional and poppler will automatically read them if they are present.  When installed, the encoding files enables poppler to correctly render CJK and Cyrrilic properly.  While poppler is licensed under the GPL, these encoding files are copyright Adobe and licensed much more strictly, and thus distributed separately.
</p>
-Des:
##----------------------------------------
=Pkg: pothana2000 1.1 2.9 noarch
=Sum: OpenType font for Telugu
+Des:
<!-- DT:Rich -->
<p>Free OpenType font for Telugu created by
Dr. Tirumala Krishna Desikacharyulu
</p>
-Des:
##----------------------------------------
=Pkg: providers 2006.11.21 105.21 noarch
=Sum: Seznam poskytovatelů Internetu
+Des:
<!-- DT:Rich -->
<p>Seznam poskytovatelů Internetu, který se používá programem
YaST2 pro snadnou konfiguraci připojení na Internet.
</p>
-Des:
##----------------------------------------
=Pkg: release-notes-sled 11.2.22 0.5.1 noarch
=Sum: Short Description of the Most Important Changes for This SUSE Linux Enterprise Desktop Release
+Des:
<!-- DT:Rich -->
<p>This package contains files with the most important changes for this SUSE Linux Enterprise Desktop release.  They can be found in the /usr/share/doc/release-notes directory.
</p>
-Des:
##----------------------------------------
=Pkg: samba-doc 3.6.3 0.18.3 noarch
=Sum: Dokumentace pro SAMBA
+Des:
<!-- DT:Rich -->
<p>This package contains all the Samba documentation as it is not part of the man pages.
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: sazanami-fonts 20040629 187.17 noarch
=Sum: Japanese "Sazanami" TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>Japanese &quot;Sazanami&quot; TrueType Fonts
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cim-client2 2.1.3 0.1.68 noarch
=Sum: Java CIM Client library
+Des:
<!-- DT:Rich -->
<p>The purpose of this package is to provide a CIM Client Class Library for Java
applications. It complies to the DMTF standard CIM Operations over HTTP and
intends to be compatible with JCP JSR48 once it becomes available. To learn
more about DMTF visit http://www.dmtf.org.
More infos about the Java Community Process and JSR48 can be found at
http://www.jcp.org and http://www.jcp.org/en/jsr/detail?id=48.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cim-client2-javadoc 2.1.3 0.1.68 noarch
=Sum: Javadoc for sblim-cim-client2
+Des:
<!-- DT:Rich -->
<p>Javadoc for sblim-cim-client2.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cim-client2-manual 2.1.3 0.1.68 noarch
=Sum: Manual and sample code for sblim-cim-client2
+Des:
<!-- DT:Rich -->
<p>Manual and sample code for sblim-cim-client2.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-testsuite 1.3.0 0.1.82 noarch
=Sum: SBLIM Testsuite
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation Base Providers Test Suite
</p>
-Des:
##----------------------------------------
=Pkg: sgml-skel 0.6 386.14 noarch
=Sum: Pomocné skripty pro SGML
+Des:
<!-- DT:Rich -->
<p>Tyto skripty vám pomohou vytvořit a spravovat části SGML systému.
</p>
-Des:
##----------------------------------------
=Pkg: sil-charis 4.0.02 28.9 noarch
=Sum: smart Unicode font for Latin and Cyrillic scripts
+Des:
<!-- DT:Rich -->
<p>Charis is similar to Bitstream Charter, one of the first fonts
designed specifically for laser printers. It is highly readable and
holds up well in less-than-ideal reproduction environments. It also
has a full set of styles - regular, italic, bold, bold italic - and so
is more useful in general publishing than Doulos SIL. Charis is a
serif, proportionally-spaced font optimized for readability in long
printed documents.
</p><p>
The goal for this product was to provide a single Unicode-based font
family that would contain a comprehensive inventory of glyphs needed
for almost any Roman- or Cyrillic-based writing system, whether used
for phonetic or orthographic needs. In addition, there is provision
for other characters and symbols useful to linguists. This font makes
use of state-of-the-art font technologies to support complex
typographic issues, such as the need to position arbitrary
combinations of base glyphs and diacritics optimally.
</p>
-Des:
##----------------------------------------
=Pkg: sil-doulos 4.0.14 28.9 noarch
=Sum: smart Unicode font for Latin and Cyrillic scripts
+Des:
<!-- DT:Rich -->
<p>The goal for this product was to provide a single Unicode-based font
family that would contain a comprehensive inventory of glyphs needed
for almost any Roman- or Cyrillic-based writing system, whether used
for phonetic or orthographic needs. In addition, there is provision
for other characters and symbols useful to linguists. This font makes
use of state-of-the-art font technologies to support complex
typographic issues, such as the need to position arbitrary
combinations of base glyphs and diacritics optimally.
</p><p>
Doulos is very similar to Times/Times New Roman, but only has a single
face - regular. It is intended for use alongside other Times-like
fonts where a range of styles (italic, bold) are not needed.
</p><p>
The Doulos SIL font contains near-complete coverage of all the
characters defined in Unicode 4.1 for Latin and Cyrillic. In total,
over 2,400 glyphs are included, providing support for over 1,900
characters as well as a large number of ligated character sequences
(e.g., contour tone letters used in phonetic transcription of tonal
languages).
</p><p>
In addition, alternately-designed glyphs are also provided for a
number of characters for use in particular contexts. The glyphs are
accessible in applications that support advanced font technologies,
specifically the Graphite or OpenType technologies. These technologies
are also utilized to provide automatic positioning of diacritics
relative to base characters in arbitrary base+diacritic combinations
(including combinations involving multiple diacritics).
</p><p>
Some important issues with respect to Unicode need to be borne in
mind. Unicode is a character encoding and not a glyph encoding. Thus
you should endeavor to use the character that reflects your character
needs rather than finding a glyph that looks right and using its
character code. Thus, for example, there is only one code for CAPITAL
ENG (U+014A), although there are 4 different glyph shapes for this
character in use around the world. Therefore it is necessary to use
other means, such as user-selectable font features, to ensure that
your document displays the right glyph for the character that you are
anticipating. The advanced typographic capabilities mentioned above
provide this very capability.
</p>
-Des:
##----------------------------------------
=Pkg: simple-ccsm-kde-lang 11.1 14.13.14.103 noarch
=Sum: Languages for package simple-ccsm-kde
+Des:
<!-- DT:Rich -->
<p>Provides translations to the package PolicyKit-kde
</p>
-Des:
##----------------------------------------
=Pkg: skkdic 20050123 149.29 noarch
=Sum: main dictionary for SKK
+Des:
<!-- DT:Rich -->
<p>main dictionary for SKK
</p>
-Des:
##----------------------------------------
=Pkg: sle-apparmor-quick_en-pdf 11.2 0.41.1 noarch
=Sum: AppArmor Quick Start (English, PDF)
+Des:
<!-- DT:Rich -->
<p>PDF of the AppArmor Quick Start (English).
</p>
-Des:
##----------------------------------------
=Pkg: sle-audit-quick_en-pdf 11.2 0.41.1 noarch
=Sum: SLE audit quick reference (English, PDF)
+Des:
<!-- DT:Rich -->
<p>SLE audit quick reference (English, PDF).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_de 11.2 0.5.10 noarch
=Sum: SLED Admin Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_de-pdf 11.2 0.5.10 noarch
=Sum: SLED Admin Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_ja 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_ja-pdf 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_pt_BR 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Brazil Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Brazil Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_pt_BR-pdf 11.2 0.5.9 noarch
=Sum: SLED Admin Guide as PDF (Brazil Portuguese)
+Des:
<!-- DT:Rich -->
<p>PDF of the SLED Admin Guide (Brazil Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_zh_CN 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_zh_CN-pdf 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_zh_TW 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-admin_zh_TW-pdf 11.2 0.5.9 noarch
=Sum: SLED Admin Guide (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Admin Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_de 11.2 0.5.12 noarch
=Sum: SLED Application Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_de-pdf 11.2 0.5.12 noarch
=Sum: SLED Application Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_ja 11.2 0.5.12 noarch
=Sum: SLED Application Guide (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_ja-pdf 11.2 0.5.12 noarch
=Sum: SLED Application Guide as PDF (Japanese)
+Des:
<!-- DT:Rich -->
<p>PDF of the SLED Application Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_pt_BR 11.2 0.5.12 noarch
=Sum: SLED Application Guide (Brazil Portuguese, PDF)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (Brazil Portuguese, PDF).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_pt_BR-pdf 11.2 0.5.12 noarch
=Sum: SLED Application Guide (Brazil Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (Brazil Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_zh_CN 11.2 0.5.12 noarch
=Sum: SLED Application Guide (Simplidied Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_zh_CN-pdf 11.2 0.5.12 noarch
=Sum: SLED Application Guide as PDF (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>PDF of the SLED Application Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_zh_TW 11.2 0.5.12 noarch
=Sum: SLED Application Guide (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Application Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-apps_zh_TW-pdf 11.2 0.5.12 noarch
=Sum: SLED Application Guide as PDF (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>PDF of the SLED Application Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-deployment_de 11.2 0.5.9 noarch
=Sum: SLED Deployment Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Deployment Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-deployment_de-pdf 11.2 0.5.9 noarch
=Sum: SLED Deployment Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED Deployment Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-deployment_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomequick_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_de 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_de-pdf 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (German)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_en-pdf 11.2 0.35.1 noarch
=Sum: SLED GNOME User Guide (English)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (English).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_ja 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_ja-pdf 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_pt_BR 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Brazil Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Brazil Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_pt_BR-pdf 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Brazil Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Brazil Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_zh_CN 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_zh_CN-pdf 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_zh_TW 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-gnomeuser_zh_TW-pdf 11.2 0.5.12 noarch
=Sum: SLED GNOME User Guide (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED GNOME User Guide (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ar 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Arabic)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Arabic).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ar-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Arabic)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Arabic).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_cs 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Czech)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Czech).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_cs-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Czech)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Czech).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_de 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (German)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_de-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (German)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (German).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Installation Quick Start (English)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (English).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_es 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Spanish)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Spanish).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_es-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Spanish)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Spanish).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_fr 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (French)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (French).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_fr-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (French)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (French).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_hu 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Hungarian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Hungarian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_hu-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Hungarian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Hungarian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_it 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Italian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Italian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_it-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Italian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Italian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ja 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start and GNOME and KDE Quick Start Guides (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ja-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Japanese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start and GNOME and KDE Quick Start Guides (Japanese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ko 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Korean)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Korean).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ko-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Korean)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Korean).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_pl 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Polish)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Polish).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_pl-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Polish)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Polish).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_pt_BR 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Brazilian Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Brazilian Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_pt_BR-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Brazilian Portuguese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Brazilian Portuguese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ru 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Russian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Russian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_ru-pdf 11.2 0.5.12 noarch
=Sum: SLED Installation Quick Start (Russian)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Russian).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_zh_CN 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_zh_CN-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Simplified Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Simplified Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_zh_TW 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-installquick_zh_TW-pdf 11.2 0.5.13 noarch
=Sum: SLED Installation Quick Start (Traditional Chinese)
+Des:
<!-- DT:Rich -->
<p>SLED Installation Quick Start (Traditional Chinese).
</p>
-Des:
##----------------------------------------
=Pkg: sled-kdequick_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-kdeuser_en-pdf 11.2 0.35.1 noarch
=Sum: SLED KDE User Guide (English)
+Des:
<!-- DT:Rich -->
<p>SLED KDE User Guide (English).
</p>
-Des:
##----------------------------------------
=Pkg: sled-libreofficequick_en-pdf 11.2 0.35.1 noarch
=Sum: SLED LibreOffice Quick Start (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) LibreOffice Quick Start in English (PDF).
</p>
-Des:
##----------------------------------------
=Pkg: sled-manuals_en 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-security_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-tuning_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sled-xen_en-pdf 11.2 0.35.1 noarch
=Sum: SLED Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Desktop (SLED) Documentation consists of several manuals such as Administration and Deployment Guide, Desktop User Guides, Application Guide, etc.
</p>
-Des:
##----------------------------------------
=Pkg: sles-kvm_en-pdf 11.2 0.41.1 noarch
=Sum: SLES KVM (English, PDF)
+Des:
<!-- DT:Rich -->
<p>Virtualization with KVM (English, PDF).
</p>
-Des:
##----------------------------------------
=Pkg: slib 3b1 19.21 noarch
=Sum: Přenositelná knihovna pro Scheme
+Des:
<!-- DT:Rich -->
<p>SLIB je přenosná knihovna pro Scheme, která poskytuje funkce pro všechny
standardní implementace Scheme.
</p>
-Des:
##----------------------------------------
=Pkg: sound-theme-freedesktop 0.2 1.17 noarch
=Sum: freedesktop.org sound theme
+Des:
<!-- DT:Rich -->
<p>The default freedesktop.org sound theme following the XDG theming
specification.  (http://0pointer.de/public/sound-theme-spec.html).
</p>
-Des:
##----------------------------------------
=Pkg: spacewalk-check 1.2.15 0.19.1 noarch
=Sum: Check for Spacewalk actions
+Des:
<!-- DT:Rich -->
<p>rhn-check polls a Spacewalk server to find and execute scheduled actions.
</p>
-Des:
##----------------------------------------
=Pkg: spacewalk-client-setup 1.2.15 0.19.1 noarch
=Sum: Configure and register an Spacewalk client
+Des:
<!-- DT:Rich -->
<p>rhn-setup contains programs and utilities to configure a system to use
Spacewalk, and to register a system with a Spacewalk server.
</p>
-Des:
##----------------------------------------
=Pkg: spacewalk-client-tools 1.2.15 0.19.1 noarch
=Sum: Support programs and libraries for Spacewalk
+Des:
<!-- DT:Rich -->
<p>Spacewalk Client Tools provides programs and libraries to allow your
system to receive software updates from a Spacewalk server.
</p>
-Des:
##----------------------------------------
=Pkg: subscription-tools 1.0 0.13.85 noarch
=Sum: Tools for testing compliance and registration status
+Des:
<!-- DT:Rich -->
<p>This package containst tools for testing compliance and registration status.
</p>
-Des:
##----------------------------------------
=Pkg: supportutils 1.20 0.28.27.1 noarch
=Sum: Support Troubleshooting Tools
+Des:
<!-- DT:Rich -->
<p>A package containing troubleshooting tools. This package contains the following: supportconfig, chkbin, schealth
</p>
-Des:
##----------------------------------------
=Pkg: suse-build-key 1.0 907.37.10 noarch
=Sum: Veřejný GPG klíč pro ověření podpisu RPM balíčku
+Del:
<!-- DT:Rich -->
<p>Tento balíček je třeba, pokud potřebujete kontrolovat důvěryhodnost
aktualizovaných balíčků poskytovaných službou YOU (Yast Online Update).
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje gpg klíč používaný k podepisování rpm balíčků
SuSE. Je nainstalován jako klíčenka (keyring) v souboru
/usr/lib/rpm/gnupg/pubring.gpg. Správci, kteří si přejí přidat vlastní klíč,
by měli postupovat takto:
</p><p>
gpg --no-options --no-default-keyring \
--keyring /usr/lib/rpm/gnupg/pubring.gpg --import
</p>
-Des:
##----------------------------------------
=Pkg: suse-sam 0.8.3 0.5.10 noarch
=Sum: Supportability Analysis Module
+Des:
<!-- DT:Rich -->
<p>A single tool to determine if an SLE product is in a supportable state. This includes appliances and NTS use.
</p>
-Des:
##----------------------------------------
=Pkg: suse-sam-data 0.8.3 0.5.9 noarch
=Sum: Supportability Analysis Module reference data
+Des:
<!-- DT:Rich -->
<p>Reference data for the Supportability Analysis Module (SAM).
</p>
-Des:
##----------------------------------------
=Pkg: suseRegister 1.4 1.24.1 noarch
=Sum: Registrační nástroj
+Des:
<!-- DT:Rich -->
<p>Command line tool for registering Novell and SUSE products.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp 2007.08.22 80.18 noarch
=Sum: Systém nápovědy SuSE (základ)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základy SuSE systém nápovědy.
</p><p>
SuSE systém nápovědy centralizuje veškerou dokumentaci do čitelné,
strukturované podoby s pohodlným vyhledáváním.
Pro rychlé spuštění klikněte na ikonu zachránce v panelu. Pro konfiguraci
použijte Ovládací centrum KDE.
</p><p>
Více informací naleznete v souboru /usr/share/doc/packages/susehelp/README.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_cz 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Czech)
+Des:
<!-- DT:Rich -->
<p>This package contains the Czech localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_de 2007.08.22 80.18 noarch
=Sum: SuSE Help System (German)
+Des:
<!-- DT:Rich -->
<p>This package contains the German localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_en 2007.08.22 80.18 noarch
=Sum: SuSE Help System (English)
+Des:
<!-- DT:Rich -->
<p>This package contains the English localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_es 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Spanish)
+Des:
<!-- DT:Rich -->
<p>This package contains the Spanish localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_fr 2007.08.22 80.18 noarch
=Sum: SuSE Help-System (French)
+Des:
<!-- DT:Rich -->
<p>This package contains the French localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_hu 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Hungarian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Hungarian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_it 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Italian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Italian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: taglib-sharp 2.0.3.7 8.5.92 noarch
=Sum: Multimedia metadata reading/writing library for popular formats
+Des:
<!-- DT:Rich -->
<p>TagLib# is a metadata or &quot;tag&quot; reader and writer library that supports the most common movie and music formats, abstracting away format specificity. TagLib# offers either a common API for all formats or access to specific APIs for a given format.
</p>
-Des:
##----------------------------------------
=Pkg: tango-icon-theme 0.8.1 2.33.1 noarch
=Sum: Téma ikon Tango
+Des:
<!-- DT:Rich -->
<p>Téma ikon Tango
</p>
-Des:
##----------------------------------------
=Pkg: terminus-font 4.20 2.12 noarch
=Sum: dobře čitelná písma s šířkou pro X11 a konzoli
+Des:
<!-- DT:Rich -->
<p>Písmo Terminus bylo navrženo pro dlouho práci (8 a více hodin) s počítačem.
Verze 4.03 obsahuje 538 znaků, kódovací stránky ISO8859-1/2/5/9/15/16,
 Windows-1250/1251/1252/1254, IBM-437/852/855/866, KOI8-R/U/E/F, Bulgarian-MIK,
 Paratype-PT154/PT254 a Macintosh-Ukrainian a také pseudografiku pro vt100 a xterm.
 </p><p>
Velikosti a styly jsou 8x14-normal, 8x14-bold,
8x14-EGA/VGA-bold, 8x16-normal, 8x16-bold, 8x16-EGA/VGA-bold,
10x20-normal, 10x20-bold, 12x24-normal, 12x24-bold a 14x28-normal
(řez je něco mezi normálním a tučným)
</p>
-Des:
##----------------------------------------
=Pkg: texlive 2007 219.34.6 noarch
=Sum: The Base System of TeXLive
+Des:
<!-- DT:Rich -->
<p>After installing texlive and the package texlive-latex, find a large
selection of documentation for TeX, LaTeX, and various layout styles
in /usr/share/texmf/doc.
</p><p>
TeX (pronounced tech) is an interpreter for text formatting and was
developed by Donald E. Knuth.  It works with control and macro commands
on a text file. Working with TeX is similar to typesetting methods.
LaTeX is a complex macro package that removes the cryptical TeX
interface and does most of the work for the user.
</p><p>
TeX uses special fonts produced by the MetaFont program. Various
printer drivers and an X11 viewer are also included in this package.
The teTeX package is based on the standard TeX package of Karl Berry,
which makes configuration much easier. It is also possible to use
PostScript fonts. A real PostScript printer is required, however.
If the ghostscript (gs) package is installed, all drivers for printing and
viewing can use these fonts. Note, however, that the fonts included in
the ghostscript package are not identical to Adobe&#39;s PostScript fonts.
The copyright prohibids us to include them on the CD.
</p><p>
Besides these features, the programs MakeIndex (for producing
indexes) and BibTeX (for literature data processing) exist.
</p><p>
The texlive package includes a full texmf tree, many programs like
tex, dvips, etc., shell script configuration, and a big collection
of documentations. This package is easily configured by the script
texconfig and has multilanguage options.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-cjk 2007 219.34.6 noarch
=Sum: LaTeXové makro pro CJK (čínština/japonština/korejština)
+Des:
<!-- DT:Rich -->
<p>CJK je balík maker pro LaTeX umožňující sazbu čínštiny, japonštiny a
korejštiny. Podporuje různé CJK kódování Big5, GB, JIS, KS, CNS.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-cjk-latex-extras 20070515 2.19 noarch
=Sum: Extra fonts and scripts for CJK LaTeX
+Des:
<!-- DT:Rich -->
<p>This package contains some extra font setup files and scripts
to automatically generate fonts and setup files to use with
CJK LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-jadetex 2007 219.34.6 noarch
=Sum: TeXový procesor pro OpenJade
+Des:
<!-- DT:Rich -->
<p>With Sebastian Rahtz&#39;s macro package jadetex, it is possible to process
the output of the TeX back-end for OpenJade and produce DVI or PDF
files. Resulting DVI files are viewable with xdvi or printable like
any other DVI file.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-latex 2007 219.34.6 noarch
=Sum: Vše o LaTeX
+Des:
<!-- DT:Rich -->
<p>This package provides LaTeX. To be exact, LaTeX2e, and a huge amount
software for LaTeX.  This package is required by most (La)TeX
documents.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-tools 2007 219.34.6 noarch
=Sum: Utilities like DviToDvi, DeTeX, and LaCheck
+Des:
<!-- DT:Rich -->
<p>The DeTeX filter removes TeX and LaTeX macros.
</p><p>
The LaCheck utility is a syntax checker for LaTeX documents.
</p><p>
The DviToDvi utilities are
</p><p>
dvibook       rearranges pages into book signatures, adds blank pages as needed
</p><p>
dviselect     selects pages and page ranges
</p><p>
dvitodvi      performs general page rearrangement of selected pages
</p><p>
dviconcat     concatenation of DVI files
</p><p>
Three simple scripts for scaling DIN A4 pages and rearranging two by
two onto a DIN A4 page (a4toa5) are included. The number of pages must
be even (which can be done by odd2even or dvibook).
</p>
-Des:
##----------------------------------------
=Pkg: timezone-java 2011m 0.3.1 noarch
=Sum: Timezone Descriptions
+Des:
<!-- DT:Rich -->
<p>These are configuration files that describe available time zones - this package
is intended for Java Virtual Machine based on OpenJDK.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update 11.1 1.37.3 noarch
=Sum: Translation Updates
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-ar 11.1 1.37.3 noarch
=Sum: Translation Updates for Arabic
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-cs 11.1 1.37.3 noarch
=Sum: Translation Updates for Czech
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-da 11.1 1.37.3 noarch
=Sum: Translation Updates for Danish
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-de 11.1 1.37.3 noarch
=Sum: Translation Updates for German
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-es 11.1 1.37.3 noarch
=Sum: Translation Updates for Spanish
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-fi 11.1 1.37.3 noarch
=Sum: Translation Updates for Finnish
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-fr 11.1 1.37.3 noarch
=Sum: Translation Updates for French
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-hu 11.1 1.37.3 noarch
=Sum: Translation Updates for Hungarian
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-it 11.1 1.37.3 noarch
=Sum: Translation Updates for Italian
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-ja 11.1 1.37.3 noarch
=Sum: Translation Updates for Japanese
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-ko 11.1 1.37.3 noarch
=Sum: Translation Updates for Korean
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-nb 11.1 1.37.3 noarch
=Sum: Translation Updates for Norwegian Bokmal
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-nl 11.1 1.37.3 noarch
=Sum: Translation Updates for Dutch
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-pl 11.1 1.37.3 noarch
=Sum: Translation Updates for Polish
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-pt 11.1 1.37.3 noarch
=Sum: Translation Updates for Portuguese
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-pt_BR 11.1 1.37.3 noarch
=Sum: Translation Updates for Brasilian Portuguese
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-ru 11.1 1.37.3 noarch
=Sum: Translation Updates for Russian
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-sv 11.1 1.37.3 noarch
=Sum: Translation Updates for Swedish
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-zh_CN 11.1 1.37.3 noarch
=Sum: Translation Updates for Simplified Chinese
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-zh_TW 11.1 1.37.3 noarch
=Sum: Translation Updates for Traditional Chinese
+Des:
<!-- DT:Rich -->
<p>This is a set of translation updates that are installed into the preferred directory, /usr/share/locale-langpack/&lt;locale&gt;/LC_MESSAGES/.
</p><p>
Applications that use gettext correctly can then pick up overridden or updated translations from this location.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-alee 8.7 166.17 noarch
=Sum: Korejská TrueType písma od A Lee.
+Des:
<!-- DT:Rich -->
<p>Korejská TrueType písma od A Lee.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic 20001125 765.17 noarch
=Sum: Čínské TrueType písmo od Arphic Technology (pouze licence)
+Des:
<!-- DT:Rich -->
<p>Čínské TrueType písma od Arphic Technology. Tento balíček obsahuje
pouze text licence. Jednotlivá písma jsou v jednotlivých balíčcích ttf-arphic-bkai00mp, ttf-arphic-bsmi00lp, ttf-arphic-gkai00mp a ttf-arphic-gbsn00lp.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-bkai00mp 20001125 765.17 noarch
=Sum: "AR PL KaitiM Big5" čínská TrueType písma od Arphic Technology
+Des:
<!-- DT:Rich -->
<p>&quot;AR PL KaitiM Big5&quot; jsou čínská tt písma ve vysoké kvalitě (bkai00mp.ttf),
které jsou díky Arphic Technology volně distribuovatelné pod licencí
 &quot;Arphic Public License&quot;
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-bsmi00lp 20001125 765.17 noarch
=Sum: "AR PL Mingti2L Big5" čínská TrueType písma od Arphic Technology
+Des:
<!-- DT:Rich -->
<p>&quot;AR PL Mingti2L Big5&quot; číské TrueType písmo (bsmi00lp.ttf) od Arphic
Technology pro svobodnou softwarovou komunitu pod licencí
&quot;Arphic Public License&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-gbsn00lp 20001125 765.17 noarch
=Sum: "AR PL Sungtil GB" čínská TrueType písma od Arphic Technology
+Des:
<!-- DT:Rich -->
<p>&quot;AR PL SungtiL GB&quot; číské TrueType písmo (gbsn00lp.ttf) od Arphic
Technology pro svobodnou softwarovou komunitu pod licencí
&quot;Arphic Public License&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-gkai00mp 20001125 765.17 noarch
=Sum: "AR PL KaitiM GB" číské TrueType písmo od Arphic Technology
+Des:
<!-- DT:Rich -->
<p>&quot;AR PL KaitiM GB&quot; číské TrueType písmo (gkai00mp.ttf) od Arphic
Technology pro svobodnou softwarovou komunitu pod licencí
&quot;Arphic Public License&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-ukai 0.1.20060928 2.9 noarch
=Sum: CJK Unicode font Kai style
+Des:
<!-- DT:Rich -->
<p>This font was taken from the from the TrueType fonts generously released by
Arphic Technologies Taiwan under the Arphic Public License.
It was modified with Fontforge by Arne Goetje &lt;arne@linux.org.tw&gt; to contain
both Big5 and GB2312 charsets plus some european characters.
</p><p>
Currently it fully supports the following charsets:
ISO8859-1,2,3,4,7,9,10,13,14,15
Big5
GB2312-80
Bopomofo Extensions for Hakka, Minnan (Unicode 4.0) and MBE variants using
the Stylistic Alternatives (salt) feature from the OTF spec.
</p><p>
Partly support is implemented for:
HKSCS
CNS 11643
GB18030
Japanese
Korean
</p>
-Des:
##----------------------------------------
=Pkg: ttf-arphic-uming 0.1.20060928 2.9 noarch
=Sum: CJK Unicode font Ming style
+Des:
<!-- DT:Rich -->
<p>This font was taken from the from the TrueType fonts generously released by
Arphic Technologies Taiwan under the Arphic Public License.
It was modified with Fontforge by Arne Goetje &lt;arne@linux.org.tw&gt; to contain
both Big5 and GB2312 charsets plus some european characters.
</p><p>
Currently it fully supports the following charsets:
ISO8859-1,2,3,4,9,10,13,14,15
Big5
GB2312-80
HKSCS 2004
Bopomofo Extensions for Hakka, Minnan (Unicode 4.0) and MBE variants using
the Alternatives (aalt) feature from the OTF spec.
</p><p>
Partly support is implemented for:
CNS 11643
GB18030
Japanese
Korean
</p>
-Des:
##----------------------------------------
=Pkg: ttf-cmex-kai 0.20061030 2.9 noarch
=Sum: CMEXKai Traditional Chinese TrueType font made by CMEX
+Des:
<!-- DT:Rich -->
<p>CMEXKai Traditional Chinese TrueType font made by CMEX.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-cmex-song 0.20061030 2.9 noarch
=Sum: CMEXSong Traditional Chinese TrueType font made by CMEX
+Des:
<!-- DT:Rich -->
<p>CMEXSong Traditional Chinese TrueType font made by CMEX.
</p>
-Des:
##----------------------------------------
=Pkg: tunables 1 0.4.3 noarch
=Sum: Set some kernel tunables
+Des:
<!-- DT:Rich -->
<p>This package contains a boot script (/etc/init.d/boot.kernel-tunables) to tune the kernel to certain workloads. A branding package (tunables-branding-*) with the configuration is required.
</p>
-Des:
##----------------------------------------
=Pkg: tunables-branding-SLED 1 0.4.3 noarch
=Sum: Set some kernel tunables for SLED
+Des:
<!-- DT:Rich -->
<p>This package contains configuration for the tunables package for typical desktop workloads.
</p>
-Des:
##----------------------------------------
=Pkg: ulimit 1.2 2.4.11 noarch
=Sum: Set system-wide per-process limits (rlimits)
+Des:
<!-- DT:Rich -->
<p>The file /etc/initscript is used by init to execute the commands
in /etc/inittab. As any process it started from init, it is a
convenient place to adjust per process limits (rlimits).
</p><p>
The script provided here does set limits on the memory usage per
process (amongst setting other limits) and thus prevents that a
single process that leaks memory can cause your system to run out
of memory and provoke the system to crawl (trash on the swap partition) before it rescues itself by killing processes (but unfortunately does
not always hit the right process with the first try). The script sets
the limits in percent of available memory, thus the defaults may match
a large range of systems.
</p><p>
Configuration is done in file /etc/sysconfig/ulimit.
</p><p>
Per user rlimit settings can be configured by filling in /etc/security/limits.conf and using the pam_limits.so functionality.
</p><p>
More finegrained resource management (per process group), can be done
via control groups (containers) with SLE11/openSUSE11.1 or newer.
</p>
-Des:
##----------------------------------------
=Pkg: unfonts 1.0.20040813 19.9 noarch
=Sum: Korejská TrueType písma
+Des:
<!-- DT:Rich -->
<p>Korejská TrueType písma
</p>
-Des:
##----------------------------------------
=Pkg: update-alternatives 1.14.19 1.22 noarch
=Sum: Správa symbolických odkazů ovlivňujících výchozí příkazy
+Des:
<!-- DT:Rich -->
<p>update-alternatives vytváří, odstraňuje, spravuje a zobrazuje informace
o symbolických odkazech v alternativ systému. Tak je možné na jeden
systém nainstalovat programy obsahující stejné nebo podobné funkce.
Například v řadě systému je nainstalováno několik textových editorů. To umožňuje
každému uživateli používat svůj oblíbený editor, ale komplikuje rozhodování
uživatelům, kteří žádnému z editorů nedávají přednost.
</p><p>
V SUSE Linuxu je tato funce dostupná pouze pro balíčky z projektu JPackage &lt;http://www.jpackage.org/&gt;
</p>
-Des:
##----------------------------------------
=Pkg: update-desktop-files 11.1 1.22 noarch
=Sum: Nástroj pro vytváření desktop souborů
+Des:
<!-- DT:Rich -->
<p>tento balíček obsahuje další překlady a shellové skripty pro aktualizaci
desktop souborů. Je popužíván %suse_update_desktop_file rpm makrem.
</p>
-Des:
##----------------------------------------
=Pkg: vmx-manager 0.2.8 236.20.27 noarch
=Sum: Create, configure, and manage VMware virtual machines
+Des:
<!-- DT:Rich -->
<p>vmx-manager allows you to create, configure, and manage VMware virtual machines.
</p>
-Des:
##----------------------------------------
=Pkg: webkit-sharp 0.2 2.45.3 noarch
=Sum: WebKit bindings for Mono
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and used
primarily in Apple&#39;s Safari browser. It is made to be embedded in other
applications, such as mail readers, or web browsers.
</p><p>
This package provides Mono bindings for WebKit libraries.
</p>
-Des:
##----------------------------------------
=Pkg: wireless-regdb 2009.11.25 8.5.51 noarch
=Sum: 802.11 regulatory domain database
+Des:
<!-- DT:Rich -->
<p>The 802.11 regulatory domain database is used by CRDA and provides allowed frequency ranges for 802.11 wireless drivers.
</p>
-Des:
##----------------------------------------
=Pkg: wm-icons 0.3.0 494.8 noarch
=Sum: Ikony a témata pro správce oken
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje několik sad ikon, skriptů a konfiguračních
nástrojů pro různé správce ikon.
</p>
-Des:
##----------------------------------------
=Pkg: words 6 69.22 noarch
=Sum: Anglický slovník
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje seznam anglických slov, který bude nainstalován jako
</p><p>
/usr/share/dict/american a /usr/share/dict/words
</p><p>
Tento slovník může být používán programy look(1) a ispell(1).
Britskou nebo kanadskou verzi slovníků najdete
v words-british popř. words-canadian.
</p>
-Des:
##----------------------------------------
=Pkg: x11-tools 0.1 167.22 noarch
=Sum: Nástroje pro X Window System
+Des:
<!-- DT:Rich -->
<p>Některé užitečné nástroje pro X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2 2.7.0 217.24 noarch
=Sum: Java XSLT processor
+Des:
<!-- DT:Rich -->
<p>Xalan je XSLT procesor pro transformaci XML dokumentů do HTML,
textu a jiných typů. Implementuje W3C dporučení pro XSL transformace
(XSLT) a XML Path Language (XPath). Lze ho používat z příkazové
řádky, v appletu nebo servletu nebo jako modul jiných programů.
</p>
-Des:
##----------------------------------------
=Pkg: xano-mincho 20040509 2.9 noarch
=Sum: Japanese "XANO-Mincho-U32" TrueType font JIS X 0213:2004
+Des:
<!-- DT:Rich -->
<p>Japanese &quot;XANO-Mincho-U32&quot; TrueType font JIS X 0213:2004
</p>
-Des:
##----------------------------------------
=Pkg: xdg-utils 1.0.2 36.18 noarch
=Sum: Utilities to uniformly interface desktop environments
+Des:
<!-- DT:Rich -->
<p>The xdg-utils package is a set of simple scripts that provide
basic desktop integration functions for any Free Desktop, such as Linux.
</p><p>
They are intended to provide a set of defacto standards.  This
means that:<ul>
<li>Third party software developers can rely on these xdg-utils
for all of their simple integration needs.

</li><li>Developers of desktop environments can make sure that their
environments are well supported
</li></ul>
If a desktop developer wants to be certain that their environment
functions with all third party software, then can simply
make sure that these utilities work properly in their environment.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages 20070427 107.31 noarch
=Sum: Balíčky XEmacs
+Des:
<!-- DT:Rich -->
<p>Kolekce přídavných lisp balíčků pro XEmacs.
Tento balíček musíte nainstalovat, obsahuje mnoho
potřebných funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages-info 20070427 107.31 noarch
=Sum: Info soubory pro Xemacs
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje všechny info soubory pro X emacs. Všechno tyto
soubory mohou být čteny přímo X-emacsem a popisují xemacs a některé jeho
režimy.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2 2.8.1 238.29.1 noarch
=Sum: Java XML parser
+Des:
<!-- DT:Rich -->
<p>Vítejte v budoucnosti! Xerces2 je nová generace vysoce výkonného
XML parseru z rodiny  Apache Xerces
Tato nová verze Xerces přichází s Xerces Native Interface (XNI)
a kompletním prostředím pro vývoj parsovacích komponent
a nastavení, které jsou extrémně modulární a jednoduše programovatelné.
</p>
-Des:
##----------------------------------------
=Pkg: xfntjp 20020904 569.20 noarch
=Sum: Japonské neproporcionální fonty pro X11
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje japonské neproporcionální fonty pro X11.
</p><p>
</p><p>
Jmenovitě fonty knj10, kaname-alter,  shinonome12, shinonome16,
k14goth, Kappa20, kanji32 a marumoji.
</p><p>
</p><p>
Navíc obsahuje také kurzívní, tučné a tučné kurzívní
verze populárních japonských fontů, které se obvykle nacházejí
v adresáři /usr/lib/X11/fonts/misc standardní distribuce XFree86
a kurzívní, tučné a tučné kurzívní verze fontů iso-8859-1, které se
stylem a šířkou pěkně hodí k japonským fontům.
</p>
-Des:
##----------------------------------------
=Pkg: xfntkr 2.1 811.17 noarch
=Sum: Korejské hangul fonty pro X11
+Des:
<!-- DT:Rich -->
<p>Korejské hangul fonty pro X11
</p>
-Des:
##----------------------------------------
=Pkg: xkeyboard-config 1.5 4.40.1 noarch
=Sum: X rozšíření pro klávesnice
+Des:
<!-- DT:Rich -->
<p>The X Keyboard Extension essentially replaces the core protocol definition of
keyboard. The extension makes possible to clearly and explicitly specify most
aspects of keyboard behaviour on per-key basis and to more closely track the
logical and physical state of the keyboard. It also includes a number of
keyboard controls designed to make keyboards more accessible to people with
physical impairments.
</p>
-Des:
##----------------------------------------
=Pkg: xmanja 0.7 338.22 noarch
=Sum: Japonské online manuály pro X11
+Des:
<!-- DT:Rich -->
<p>Japonské online manuály pro X11
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons 1.3.02 227.29.54 noarch
=Sum: Obecný kód pro XML projekty
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-apis 1.3.02 227.29.54 noarch
=Sum: Subprojekt API pro xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the APIs subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xmlcharent 0.3 403.14 noarch
=Sum: XML Character Entities
+Des:
<!-- DT:Rich -->
<p>XML kódování 19ti standardních znakových entit definovaných v
nenormativním dodatku [ISO 8879:1986].
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-doc 7.4 1.37.70 noarch
=Sum: X.Org documentation
+Des:
<!-- DT:Rich -->
<p></p><p>
X.Org dokumentace ve formátu PostScript.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts 7.4 1.20 noarch
=Sum: X.Org písma
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje písma spravovaná a dodávaná s X.Org.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts-core 7.4 1.20 noarch
=Sum: Základní písma X.Org
+Des:
<!-- DT:Rich -->
<p>This package contains the &#39;fixed&#39; and &#39;cursor&#39; font required for any X
Server.
</p>
-Des:
##----------------------------------------
=Pkg: xsp 2.6.5 0.5.93 noarch
=Sum: Malý webový server pro ASP.NET
+Des:
<!-- DT:Rich -->
<p>XSP server je malý webový server, který hostí MONO systém. Webové třídy jsou obvyklé známé jako ASP.NET.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-add-on 2.17.28 0.5.95 noarch
=Sum: YaST2 - Add-On media installation code
+Des:
<!-- DT:Rich -->
<p>This package contains YaST Add-On media installation code.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-add-on-creator 2.17.15 0.5.93 noarch
=Sum: YaST2-  module for creating Add-On product
+Des:
<!-- DT:Rich -->
<p>A wizard for creating your own Add-On product
</p>
-Des:
##----------------------------------------
=Pkg: yast2-apparmor 2.17.12 0.5.73 noarch
=Sum: YaST2 - Plugins for AppArmor Profile Management
+Des:
<!-- DT:Rich -->
<p>Yast2 formuláře a komponenty pro správu Novell AppArmor profilů.
</p><p>
Tento balíček je součástí nástrojů pojmenovaných SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-audit-laf 2.17.10 0.2.18 noarch
=Sum: YaST2 - Configuration of Linux Auditing (LAF)
+Des:
<!-- DT:Rich -->
<p>This module allows the configuration of the audit daemon as well as to add rules for the audit subsystem.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-autofs 2.17.1 0.1.61 noarch
=Sum: YaST2 - Module to Create and Manage autofs Entries in LDAP
+Des:
<!-- DT:Rich -->
<p>This makes possible to create and manage autofs entries in an LDAP server.
The autofs entries will be created according the nis.schema using the objectclasses nisMap and nisObject. The entries are placed under ou=AUTOFS,$LDAPBASE.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-backup 2.17.11 0.7.4 noarch
=Sum: YaST2  - Zálohování systému
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje modul vyhledávají změněné soubory, které jsou pak zálohovány.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-branding-SLED 2.17.0 1.11 noarch
=Sum: YaST2 - SLED Branding
+Des:
<!-- DT:Rich -->
<p>YaST2 branding for the SUSE LINUX Enterprise Desktop distribution
</p>
-Des:
##----------------------------------------
=Pkg: yast2-firewall 2.17.11 0.5.92 noarch
=Sum: YaST2 - Konfigurace firewallu
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci firewallu.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-firstboot 2.17.16.1 0.3.1 noarch
=Sum: YaST2 - Initial System Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST firstboot utility runs after installation is completed.  It guides the user through a series of steps that allows for easier configuration of the machine.
</p><p>
YaST firstboot does not run by default and has  to be configured to run by the user or the system administrator. It is useful for image deployments where the system in the image is completely configured, however some last steps like root password and user logins have to be created to personalize the system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-inetd 2.17.3 1.53 noarch
=Sum: YaST2 - Konfigurace síťových služeb
+Des:
<!-- DT:Rich -->
<p>Komponenta YaST2 pro konfiguraci démonů inetd a xinetd.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-installation 2.17.99 0.5.22 noarch
=Sum: YaST2 - Instalační část
+Des:
<!-- DT:Rich -->
<p>Odpovídá kódu, který je na instalačním médiu.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-irda 2.17.3 0.1.85 noarch
=Sum: YaST2 - konfigurace IrDA
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring the Infra-red Data Access (IrDA) stack.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-iscsi-client 2.17.34 0.5.1 noarch
=Sum: YaST2 - iSCSI Client Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for configuration of an
iSCSI client.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-kerberos-client 2.17.14 0.5.1 noarch
=Sum: YaST2 - Konfigurace Kerberos klienta
+Des:
<!-- DT:Rich -->
<p>S tímto modulem můžete nastavit klienta Kerberos tak, že se pro autorizaci uživatelů
použije Kerberos server.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap-client 2.17.34 0.5.3 noarch
=Sum: YaST2 - Konfigurace LDAP klienta
+Des:
<!-- DT:Rich -->
<p>Pomocí tohoto modulu YaST2 lze nastavit LDAP server tak, aby jej bylo možné
využívat pro autentizaci uživatelů při přihlašování.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-linux-user-mgmt 2.14.1 217.36 noarch
=Sum: YaST2 - Novell's Linux User Management Configuration
+Des:
<!-- DT:Rich -->
<p>Linux User Management poskytuje software pro použití Novell eDirecotory pro administraci uživatelů a skupin v linuxovém systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mail 2.17.6 0.9.15 noarch
=Sum: YaST2 - Konfigurace elektronické pošty
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for mail configuration.
It handles Postfix, Cyrus, Amavis and Fetchmail.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-metapackage-handler 0.8.7 1.34 noarch
=Sum: YaST2 - Easy Installation of Add-on RPMs using Metapackages
+Des:
<!-- DT:Rich -->
<p>With this technology users can install packages and add repositories with a simple click on a link in a website.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-client 2.17.13 0.5.189 noarch
=Sum: YaST2 - Konfigurace NFS klienta
+Des:
<!-- DT:Rich -->
<p>Komponenta YaST2 pro konfiguraci NFS (network file system), který
umožňuje přístup k souborům na vzdálených počítačích.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-common 2.17.7 1.1.2 noarch
=Sum: YaST2 - NFS Configuration, common parts
+Des:
<!-- DT:Rich -->
<p>The common parts for YaST2 NFS configuration, both server and client.
NFS stands for network file system access.
It allows access to files on remote machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ntp-client 2.17.14 1.10.14 noarch
=Sum: YaST2 - Konfigurace NTP klienta
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje modul YaST2 pro konfiguraci klienta NTP.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-online-update 2.17.21 0.1.89 noarch
=Sum: YaST2 - Aktualizace online (YOU)
+Des:
<!-- DT:Rich -->
<p>YaST Online Update (YOU) nabízí pohodlnou cestu jak stáhnout a nainstalovat
bezpečnostní a jiné opravy systému. Implicitně používá jako zdroj oficiální zrcadla
serverů SuSE, ale lze použít i lokální depozitáře těchto souborů nebo opravná CD.
</p><p>
Balíček poskytuje grafické rozhraní pro YOU, které se dá použít s i bez X Window systémem.
Spouští se z ovládacího centra YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-online-update-frontend 2.17.21 0.1.89 noarch
=Sum: YaST2 - Aktualizace online (YOU)
+Des:
<!-- DT:Rich -->
<p>Desktop soubory pro YaST2 online update
</p>
-Des:
##----------------------------------------
=Pkg: yast2-pam 2.17.3 0.5.211 noarch
=Sum: YaST2 - PAM agent
+Des:
<!-- DT:Rich -->
<p>Tohoto agenta používá YaST2 ke změně konfiguračních souborů PAM.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-phone-services 2.16.0 19.53 noarch
=Sum: YaST2 - Konfigurace telefonních služeb
+Des:
<!-- DT:Rich -->
<p>Balík obsahuje moduly YaST2 pro konfiguraci dodatečných
telefonních služeb, například FAXu a záznamníku.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-rdp 2.17.0 4.1.92 noarch
=Sum: YaST2 - RDP Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for remote desktop configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-registration 2.17.35.3 0.5.87 noarch
=Sum: YaST2 - Registration Module
+Des:
<!-- DT:Rich -->
<p>Modul registrace produktů a automatického získání aktualizačních zdrojů.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-registration-branding-SLE 2.17.35.3 0.5.87 noarch
=Sum: YaST2 - Registration Module
+Des:
<!-- DT:Rich -->
<p>Modul registrace produktů a automatického získání aktualizačních zdrojů.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-repair 2.17.11 0.5.109 noarch
=Sum: YaST2 - Nástroj pro opravu systému
+Des:
<!-- DT:Rich -->
<p>YaST2 modul používaný pro opravu poškozeného systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-restore 2.17.6 0.7.3 noarch
=Sum: YaST2 - Obnovení systému
+Des:
<!-- DT:Rich -->
<p>Tento modul YaST2 zajistí obnovu systému ze zálohy vytvořené zálohovacím modulem.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-runlevel 2.17.9 0.7.3 noarch
=Sum: YaST2 - Editor úrovní běhů
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci služeb spouštěných
při startu počítače.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-samba-client 2.17.21 0.5.186 noarch
=Sum: YaST2 - Konfigurace Samba klienta
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje modul YaST2 pro konfiguraci pracovní skupiny a domény
SMB a pro autentizaci v SMB doméně.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-samba-server 2.17.13 0.7.5 noarch
=Sum: YaST2 - Konfigurace Samba serveru
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje modul konfigurace Samba serveru pro YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-security 2.17.15 0.5.214 noarch
=Sum: YaST2 - Konfigurace bezpečnosti
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci bezpečnosti.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sudo 2.17.3 1.53 noarch
=Sum: YaST2 - Konfigurace sudo
+Des:
<!-- DT:Rich -->
<p>Komponenta YaST2 pro konfiguraci sudo.
Nastavuje oprávnění uživatelů spouštět příkazy jako root či jiný uživatel.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-support 2.17.19 2.1.59 noarch
=Sum: YaST2 - Dotazy na instalační podporu
+Des:
<!-- DT:Rich -->
<p>Tento modul umožňuje posílat dotazy na Instalační podporu ve
standardizovaném formátu. 
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sysconfig 2.17.0 1.38 noarch
=Sum: YaST2 - Editor souborů sysconfig
+Des:
<!-- DT:Rich -->
<p>Grafický editor souborů v /etc/sysconfig se zabudovaným vyhledáváním
a kontextovými informacemi.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-theme-SLE 2.17.27 0.18.9 noarch
=Sum: YaST2 - SLE Theme
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 theme for the SUSE Linux Enterprise Family.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-af 2.17.2 1.15 noarch
=Sum: YaST2 - Afrikaans English Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Afrikaans.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ar 2.17.32 0.5.10 noarch
=Sum: YaST2 - Překlady do arabštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlad do arabštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-bg 2.17.7 1.15 noarch
=Sum: YaST2 - Překlady do bulharštiny
##----------------------------------------
=Pkg: yast2-trans-bn 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do bengálštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do bengálštiny
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-bs 2.17.1 1.15 noarch
=Sum: YaST2 - překlady do bosenštiny
##----------------------------------------
=Pkg: yast2-trans-ca 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do katalánštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do katalánštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-cs 2.17.42 0.5.10 noarch
=Sum: YaST2 - Překlady do češtiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do češtiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-cy 2.17.1 1.15 noarch
=Sum: YaST2 - Překlady do velštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlad do welštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-da 2.17.33 0.5.1 noarch
=Sum: YaST2 - Překlady do dánštiny
##----------------------------------------
=Pkg: yast2-trans-de 2.17.50 0.5.10 noarch
=Sum: YaST2 - Překlady do němčiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Německé překlady
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-el 2.17.16 0.5.12 noarch
=Sum: YaST2 - Překlady do řečtiny
##----------------------------------------
=Pkg: yast2-trans-en_GB 2.17.26 0.2.5 noarch
=Sum: YaST2 - Překlady do britské angličtiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlad do britské angličtiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-en_US 2.17.32 0.5.1 noarch
=Sum: YaST2 - Překlady do americké angličtiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do americké angličtiny
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-es 2.17.49 0.5.10 noarch
=Sum: YaST2 - Překlady do španělštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Spanish Translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-et 2.17.4 1.15 noarch
=Sum: YaST2 - překlady do estonštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do estonštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-fa 2.17.1 1.15 noarch
=Sum: YaST2 - Persian Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Persian Translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-fi 2.17.36 0.5.10 noarch
=Sum: YaST2 - Překlady do finštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - finský překlad
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-fr 2.17.51 0.5.10 noarch
=Sum: YaST2 - Překlady do francouzštiny
##----------------------------------------
=Pkg: yast2-trans-gl 2.17.19 1.15 noarch
=Sum: YaST2 - Galician Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Galician translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-gu 2.17.2 1.15 noarch
=Sum: YaST2 - Gujarati Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Gujarati.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-hi 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do hindštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do hindštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-hr 2.17.11 1.15 noarch
=Sum: YaST2 - Překlady do chorvatštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do chorvatštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-hu 2.17.52 0.5.5 noarch
=Sum: YaST2 - Překlady do maďarštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do maďarštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-id 2.17.2 1.15 noarch
=Sum: YaST2 - překlady do indonéštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlady do indonéštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-it 2.17.52 0.5.10 noarch
=Sum: YaST2 - Překlady do italštiny
+Des:
<!-- DT:Rich -->
<p>Italské překlady YaST2
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ja 2.17.43 0.5.10 noarch
=Sum: YaST2 - Překlady do japonštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do japonštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-jv 2.17.1 1.15 noarch
=Sum: YaST2 - Javanese Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Javanese.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ka 2.17.4 1.15 noarch
=Sum: YaST2 - Georgian Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Georgian.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-km 2.17.12 1.15 noarch
=Sum: YaST2 - Překlady do khmérštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do khmérštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ko 2.17.49 0.5.10 noarch
=Sum: YaST2 - Překlady do korejštiny
##----------------------------------------
=Pkg: yast2-trans-lo 2.17.1 1.15 noarch
=Sum: YaST2 - Lao Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Lao.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-lt 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do litevštiny
##----------------------------------------
=Pkg: yast2-trans-mk 2.17.1 1.15 noarch
=Sum: YaST2 - Překlady do makedonštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do makedonštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-mr 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do jazyka maráthí
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlad do jazyka maráthí.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-nb 2.17.30 0.5.12 noarch
=Sum: YaST2 - Překlady do norštiny (Bokmaal)
##----------------------------------------
=Pkg: yast2-trans-nl 2.17.47 0.5.9 noarch
=Sum: YaST2 - Překlady do holandštiny
##----------------------------------------
=Pkg: yast2-trans-pa 2.17.5 1.15 noarch
=Sum: YaST2 - Překlad do pundžábštiny
+Des:
<!-- DT:Rich -->
<p>Překlad do pandžábštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-pl 2.17.45 0.5.10 noarch
=Sum: YaST2 - Překlady do polštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do polštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-pt 2.17.8 0.5.12 noarch
=Sum: YaST2 - Překlady do portugalštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do portugalštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-pt_BR 2.17.48 0.5.10 noarch
=Sum: YaST2 - Překlady do brazilské portugalštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do brazilské portugalštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ro 2.17.7 1.15 noarch
=Sum: YaST2 - rumunský překlad
+Des:
<!-- DT:Rich -->
<p>YaST2 - Překlady do rumunštiny
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-ru 2.17.43 0.5.10 noarch
=Sum: YaST2 - Překlady do ruštiny
##----------------------------------------
=Pkg: yast2-trans-si 2.17.2 1.15 noarch
=Sum: YaST2 - Sinhala Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Sinhala.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-sk 2.17.3 1.15 noarch
=Sum: YaST2 - Překlady do slovenštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Slovak Translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-sl 2.17.2 1.15 noarch
=Sum: YaST2 - Překlady do slovinštiny
##----------------------------------------
=Pkg: yast2-trans-sr 2.17.1 1.15 noarch
=Sum: YaST2 - Překlady do srbštiny
##----------------------------------------
=Pkg: yast2-trans-stats 2.15.0 2.17 noarch
=Sum: YaST2 - Statistiky překladů
+Des:
<!-- DT:Rich -->
<p>The package contains statistic files (one file per language).  With the help of these statistics Yast warns you if you select a language for installation which is unsufficiently translated.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-sv 2.17.33 0.5.10 noarch
=Sum: YaST2 - Překlady do švédštiny
##----------------------------------------
=Pkg: yast2-trans-ta 2.17.2 1.15 noarch
=Sum: YaST2 - Tamil Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Tamil translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-th 2.17.13 1.15 noarch
=Sum: YaST2 - Thai Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Thai translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-tr 2.17.14 0.5.12 noarch
=Sum: YaST2 - Překlady do turečtiny
##----------------------------------------
=Pkg: yast2-trans-uk 2.17.26 0.2.5 noarch
=Sum: YaST2 - Překlady do ukrajinštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - překlad do ukrajinštiny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-vi 2.17.2 1.15 noarch
=Sum: YaST2 - Vietnamese Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Vietnamese.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-wa 2.17.16 1.15 noarch
=Sum: YaST2 - Walloon Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Walloon.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-xh 2.17.2 1.15 noarch
=Sum: YaST2 - Xhosa Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Xhosa.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-zh_CN 2.17.37 0.5.10 noarch
=Sum: YaST2 - Překlady do zjednodušené čínštiny
+Des:
<!-- DT:Rich -->
<p>YaST2 - Simplified Chinese translations.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-trans-zh_TW 2.17.32 0.5.10 noarch
=Sum: YaST2 - Překlady do tradiční čínštiny
##----------------------------------------
=Pkg: yast2-trans-zu 2.17.2 1.15 noarch
=Sum: YaST2 - Zulu Translations
+Des:
<!-- DT:Rich -->
<p>YaST2 - Translations for Zulu.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tv 2.17.5 0.2.33 noarch
=Sum: YaST2 - Konfigurace TV karty
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponentu YaST2 pro konfiguraci TV karty.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-wagon 2.17.31 0.5.11 noarch
=Sum: YaST2 - Migration Tool for Service Packs
+Des:
<!-- DT:Rich -->
<p>Wagon is a convenience tool to guide the user through the migration. It does not contain any extra functionality beyond what&#39;s available through command line tools.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-x11 2.17.13.1 0.3.1 noarch
=Sum: YaST2 - Konfigurace grafického rozhraní (X Window System)
+Des:
<!-- DT:Rich -->
<p>Tento module se používá pro konfiguraci X Window systému za běhu.
Modul je přístupný z ovládacího centra YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: 3ddiag 0.742 32.25 x86_64
=Sum: Nástroj pro kontrolu 3D konfigurace OpenGL
+Des:
<!-- DT:Rich -->
<p>Tento nástroj slouží pro kontrolu 3D konfigurace.
</p>
-Des:
##----------------------------------------
=Pkg: CASA 1.7.1592 2.3.53 x86_64
=Sum: CASA (Novell Common Authentication Service Adapter)
+Des:
<!-- DT:Rich -->
<p>CASA (Common Authentication Services Adaptor) je obecný autentizační a bezpečnostní balík poskytující sadu knihoven pro vývojáře aplikací a služeb, které umožňují jednotné přihlášení do podnikové sítě. CASA poskytuje lokální úložiště osobních údajů, které je ve verzi 1.0 založeno čistě na sezeních. Na systémech Novell Linux Desktop, Windows a Apple je naplněno vašimi přihlašovacími údaji.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-32bit 1.7.1592 2.3.53 x86_64
=Sum: CASA (Novell Common Authentication Service Adapter)
+Des:
<!-- DT:Rich -->
<p>CASA (Common Authentication Services Adaptor) je obecný autentizační a bezpečnostní balík poskytující sadu knihoven pro vývojáře aplikací a služeb, které umožňují jednotné přihlášení do podnikové sítě. CASA poskytuje lokální úložiště osobních údajů, které je ve verzi 1.0 založeno čistě na sezeních. Na systémech Novell Linux Desktop, Windows a Apple je naplněno vašimi přihlašovacími údaji.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-gui 1.7.1592 2.3.53 x86_64
=Sum: Konzolový nástroj pro CASA
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje CASA (Common Authnetication Services Adapter)
aplikaci pro správu osobních dat v CASA a pro vaše kwallet gnome klíče.
Můžete také provázat tajné informace navzájem.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-kwallet 1.7.758 162.26 x86_64
=Sum: CASA Aggregation and Distribution KWallet plugin
+Des:
<!-- DT:Rich -->
<p>CASAK-kwallet (CASA Kwallet) is the KWallet plugin for enabling the
CASA GUI to perform Aggregation and Distribution tasks for managing
KWallet through CASA in KDE desktop.
</p>
-Des:
##----------------------------------------
=Pkg: CASA_auth_token_client 1.7.1587 1.43 x86_64
=Sum: Novell CASA Authentication Token Libraries for Client Applications
+Des:
<!-- DT:Rich -->
<p>CASA_auth_token is an authentication token infrastructure with support
for multiple authentication mechanisms with an emphasis on providing a
scalable single sign-on solution.
</p><p>
A key feature of CASA_auth_token is that its authentication tokens
contain identity information about the entity being authenticated. This
information contained in the tokens is configured on a per-service
basis. Because of this feature, we say that CASA_auth_token projects an
&quot;Authenticated Identity&quot;.
</p><p>
The CASA_auth_token_client package contains the necessary library and
configuration files for client applications to obtain authentication
tokens.
</p>
-Des:
##----------------------------------------
=Pkg: ConsoleKit 0.2.10 64.65.1 x86_64
=Sum: System daemon for tracking users, sessions and seats
+Des:
<!-- DT:Rich -->
<p>ConsoleKit is a system daemon for tracking what users are logged
into the system and how they interact with the computer (e.g.
which keyboard and mouse they use).
</p>
-Des:
##----------------------------------------
=Pkg: ConsoleKit-32bit 0.2.10 64.65.1 x86_64
=Sum: System daemon for tracking users, sessions and seats
+Des:
<!-- DT:Rich -->
<p>ConsoleKit is a system daemon for tracking what users are logged
into the system and how they interact with the computer (e.g.
which keyboard and mouse they use).
</p>
-Des:
##----------------------------------------
=Pkg: ConsoleKit-x11 0.2.10 64.65.1 x86_64
=Sum: System daemon for tracking users, sessions and seats
+Des:
<!-- DT:Rich -->
<p>ConsoleKit is a system daemon for tracking what users are logged
into the system and how they interact with the computer (e.g.
which keyboard and mouse they use).
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB 1.2.3 6.32 x86_64
=Sum: Grafická knihovna pro framebuffer zařízení
+Des:
<!-- DT:Rich -->
<p>DirectFB je malá knihovna, která má na starosti grafickou akceleraci, obsluhu vstupních zařízení a obsahuje integrovaný grafický systém s podporou transparentních oken a více zobrazených vrstev. Tato vrstva je zcela abstrahovaná o hardwaru se softwarovými fallbacky pro každou grafickou operaci, která není podporovaná stávajícím hardwarem. DirectFB přidává grafický výkon embedded systémům a vytváří tak nové standardy pro používání grafiky v Linuxu.
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB-32bit 1.2.3 6.32 x86_64
=Sum: Grafická knihovna pro framebuffer zařízení
+Des:
<!-- DT:Rich -->
<p>DirectFB je malá knihovna, která má na starosti grafickou akceleraci, obsluhu vstupních zařízení a obsahuje integrovaný grafický systém s podporou transparentních oken a více zobrazených vrstev. Tato vrstva je zcela abstrahovaná o hardwaru se softwarovými fallbacky pro každou grafickou operaci, která není podporovaná stávajícím hardwarem. DirectFB přidává grafický výkon embedded systémům a vytváří tak nové standardy pro používání grafiky v Linuxu.
</p>
-Des:
##----------------------------------------
=Pkg: FirmwareUpdateKit 1.1 2.17 x86_64
=Sum: Assist with DOS-based firmware updates
+Des:
<!-- DT:Rich -->
<p>Create a bootable mini-DOS system and add files to it. Useful if you have
to do firmware updates from DOS.
</p>
-Des:
##----------------------------------------
=Pkg: ICAClient 11.0 0.3.17 x86_64
=Sum: Citrix klient
+Des:
<!-- DT:Rich -->
<p>Citrix ICA klient
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>CITRIX(R) LICENSE AGREEMENT
</p><p>
This is a legal agreement (&quot;AGREEMENT&quot;) between you, the Licensed User, and Citrix Systems, Inc., or Citrix Systems International GmbH. Your location of receipt of this PRODUCT determines the licensing entity hereunder (the applicable entity is hereinafter referred to as &quot;CITRIX&quot;). Citrix Systems, Inc., a Delaware corporation, markets and supports this product or feature release (both hereinafter &quot;PRODUCT&quot;) in the Americas. Citrix Systems International GmbH, a Swiss company wholly owned by Citrix Systems, Inc., markets and supports this PRODUCT in Europe, the Middle East, Africa, Asia, and the Pacific. BY SELECTING &quot;I ACCEPT&quot; BELOW, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, SELECT &quot;I DO NOT ACCEPT&quot; BELOW AND DO NOT INSTALL OR USE THE PRODUCT.
<ol>
<li>GRANT OF LICENSE. This PRODUCT contains software that provides services on a computer called a server (&quot;Server Software&quot;) and may contain software that allows a computer to access or utilize the services provided by the Server Software (&quot;Client Software&quot;). This PRODUCT is licensed under a concurrent user model. Server Software is activated by user licenses that allow use of the Server Software in increments defined by the license model (&quot;User Licenses&quot;). Client Software is not activated by User Licenses but will not operate in conjunction with the Server Software without the Server Software being activated. User Licenses for other Citrix products or other editions of the same PRODUCT may not be used to increase the allowable use for the PRODUCT. CITRIX grants to you the following worldwide, non-exclusive and perpetual rights (except as subject to termination as set forth below and as to Evaluation PRODUCTS) to the Server Software and Client Software, if any, and accompanying documentation (collectively called the &quot;SOFTWARE&quot;):
</li></ol>
a.	Server Software. You may install and use the Server Software on one or more computers (&quot;Server(s)&quot;). Each User License for the Server Software may be installed and used only on a single license server within your production environment and a single license server within your disaster recovery environment. The Server Software may be used only to support up to the allowable number of ICA, RDP, or other managed connections within each environment based on your total purchases of User Licenses. Each User License that is installed in both a production and disaster recovery environment may be used only in one of the environments at any one time, except for duplicate use during routine testing of the disaster recovery environment.
</p><p>
b.	Client Software. The Client Software, if any, may be installed and used on an unlimited number of Client Devices. You may use the Client Software only to access the Server Software up to the allowable number of connections based on your total purchase of User Licenses.
</p><p>
c.	MetaFrame Presentation Server, Enterprise Edition, Component Limitations on Use. The &quot;Web Interface Extension&quot; of Enterprise Edition Server Software may be used only in support of Enterprise Edition Servers or MetaFrame Presentation Server for UNIX(R) Operating Systems Servers. The &quot;Installer&quot; component of the Enterprise Edition Server Software may be installed only on a Server on which Enterprise Edition is installed. The &quot;Packager&quot; component of Enterprise Edition Server Software may be installed and used only with a Server on which Enterprise Edition is installed, or with Microsoft(R) Windows(R) NT Server 4.0, Terminal Server Edition, Windows 2000 Server or Windows Server 2003, Standard Edition, Windows 2000 Advanced Server or Windows Server 2003, Enterprise Edition, or Windows 2000 Datacenter Server or Windows Server 2003, Datacenter Edition or their successors. The &quot;Installer&quot; component may be installed on a separate Server from the &quot;Packager&quot; component as recommended in the accompanying documentation.
</p><p>
d.	Microsoft License. If you access terminal server functionality provided by Microsoft operating system products, you need to purchase additional licenses to use such products. Consult the license agreements for the Microsoft operating system products you are using to determine which licenses you must acquire.
</p><p>
e.	Not For Resale. If this SOFTWARE is labeled &quot;Not For Resale,&quot; notwithstanding any term to the contrary in this Agreement, your license permits use only if you are a current Citrix authorized distributor or reseller and then only for demonstration, test, or evaluation purposes in support of your customers. Not for Resale Software may not be used for customer training. Note that Not for Resale SOFTWARE disables itself on the &quot;time-out&quot; date identified on the SOFTWARE packaging.
</p><p>
f.	Evaluation. If this SOFTWARE is labeled &quot;Evaluation,&quot; notwithstanding any term to the contrary in this Agreement, your license permits use only for your internal demonstration, test, or evaluation purposes. Note that Evaluation SOFTWARE disables itself on the &quot;time-out&quot; date identified on the SOFTWARE packaging.
</p><p>
g.	Developers&#39; Edition. If this SOFTWARE is labeled &quot;Developers&#39; Edition,&quot; notwithstanding any term to the contrary in this Agreement, your license permits use only for your internal development of product(s) to operate in conjunction with the SOFTWARE. You receive no license hereunder to incorporate the SOFTWARE or any portion thereof in your own product(s).
</p><p>
h.	Archive Copy. You may make one (1) copy of the SOFTWARE in machine-readable form solely for back-up purposes, provided that you reproduce all proprietary notices on the copy.
<ol>
<li>HOSTING RIGHTS. You may use the Server Software to provide application services to third parties (&quot;Hosting&quot;). As a part of such Hosting, you may copy and distribute the Client Software, with its electronic, click-to-accept license, to such third parties.

</li><li>SUBSCRIPTION RIGHTS. Your subscription for the SOFTWARE (&quot;Subscription&quot;) shall begin on the date the User Licenses are delivered to you by e-mail. Should User Licenses be delivered to you on a tangible license card, Subscription shall instead begin on the date you request that the User Licenses be allocated to you through mycitrix.com. Subscription shall continue for a term of one year thereafter unless terminated sooner (the &quot;Subscription Term&quot;). During the Subscription Term, CITRIX may, from time to time, generally make Updates available for licensing to the public. For the purposes of this AGREEMENT, an Update shall mean a generally available release of the same SOFTWARE. Upon general availability of Updates during the Subscription Term, CITRIX shall provide you with one (1) copy of each such Update for each copy of the SOFTWARE originally licensed to you pursuant to this AGREEMENT to support up to the number of User Licenses you are entitled to based on your purchase of Subscription for such User Licenses, without additional charge. Any such Updates so delivered to you shall be considered SOFTWARE under the terms of this AGREEMENT, except they are not covered by the Limited Warranty applicable to SOFTWARE, to the extent permitted by applicable law.
</li></ol>
You acknowledge that CITRIX may develop and market new or different computer programs or editions of the SOFTWARE that use portions of the SOFTWARE and that perform all or part of the functions performed by the SOFTWARE. Nothing contained in this AGREEMENT shall give you any rights with respect to such new or different computer programs or editions. You also acknowledge that CITRIX is not obligated under this AGREEMENT to make any Updates available to the public. Any deliveries of Updates shall be Exworks CITRIX (Incoterms 2000).
<ol>
<li>DESCRIPTION OF OTHER RIGHTS, LIMITATIONS AND OBLIGATIONS. Unless expressly permitted by applicable law, you may not rent, timeshare, or lease the SOFTWARE, but you may make a permanent transfer of the SOFTWARE and accompanying written materials to a third party, provided you promptly notify Citrix of the transfer and retain no copies and the third party agrees to the terms of this AGREEMENT prior to the transfer. If you purchased User Licenses in the SOFTWARE to replace other Citrix licenses for other Citrix software and such replacement is a condition of the transaction, you agree to destroy those other Citrix licenses and retain no copies after installation of the new User Licenses and SOFTWARE. You shall provide the serial numbers of such replaced licenses and corresponding replacement User Licenses to the reseller, and upon request, directly to Citrix for license tracking purposes. If the SOFTWARE is the Web Interface for Presentation Server, you may use the scripting capability to customize the look, feel, and functionality of the SOFTWARE. You may not otherwise modify, translate, reverse engineer, decompile, disassemble, create derivative works based on, or copy (except for back-up as permitted above) the SOFTWARE, except to the extent such foregoing restriction is expressly prohibited by applicable law. You may not remove any proprietary notices, labels, or marks on any SOFTWARE. To the extent permitted by applicable law, you agree to allow CITRIX to audit your compliance with the terms of this AGREEMENT upon prior written notice during normal business hours.
</li></ol>
YOU MAY NOT USE, COPY, MODIFY, OR TRANSFER THE SOFTWARE OR ANY COPY IN WHOLE OR IN PART, OR GRANT ANY RIGHTS IN THE SOFTWARE OR ACCOMPANYING DOCUMENTATION, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. ALL RIGHTS NOT EXPRESSLY GRANTED ARE RESERVED BY CITRIX OR ITS SUPPLIERS.
</p><p>
You hereby agree, that to the extent that any applicable mandatory laws (such as, for example, national laws implementing EC Directive 91/250 on the Legal Protection of Computer Programs) give you the right to perform any of the aforementioned activities without the consent of CITRIX to gain certain information about the SOFTWARE, before you exercise any such rights, you shall first request such information from CITRIX in writing detailing the purpose for which you need the information. Only if and after CITRIX, at its sole discretion, partly or completely denies your request, shall you exercise your statutory rights.
<ol>
<li>INFRINGEMENT INDEMNIFICATION. Citrix shall indemnify and defend, or at its option, settle any claim, suit or proceeding brought against you based on an allegation that the SOFTWARE infringes upon any patent or copyright of any third party (&quot;Infringement Claim&quot;), provided you promptly notify Citrix in writing of your notification or discovery of an Infringement Claim such that Citrix is not prejudiced by any delay in such notification. Citrix will have sole control over the defense or settlement of any Infringement Claim and you will provide reasonable assistance in the defense of the same. Following notice of an Infringement Claim, or if Citrix believes such a claim is likely, Citrix may at its sole expense and option: (i) procure for you the right to continue to use the alleged infringing SOFTWARE; (ii) replace or modify the SOFTWARE to make it non-infringing; or (iii) accept return of the SOFTWARE and provide you with a refund as appropriate. Citrix assumes no liability for any Infringement Claims or allegations of infringement based on: (i) your use of any SOFTWARE after notice that you should cease use of such SOFTWARE due to an Infringement Claim; (ii) any modification of the SOFTWARE by you or at your direction; or (iii) your combination of SOFTWARE with non-Citrix programs, data, hardware, or other materials, if such Infringement Claim would have been avoided by the use of the SOFTWARE alone. THE FOREGOING STATES YOUR EXCLUSIVE REMEDY WITH RESPECT TO ANY INFRINGEMENT CLAIM.

</li><li>LIMITED WARRANTY AND DISCLAIMER. CITRIX warrants that, for a period of ninety (90) days from the date of delivery of the SOFTWARE to you, the media on which the SOFTWARE is furnished, if any, under normal use will be free from defects in materials and workmanship, and that the SOFTWARE will perform substantially in accordance with the CITRIX product documentation published by CITRIX and included with the SOFTWARE. CITRIX and its suppliers&#39; entire liability and your exclusive remedy under this warranty (which is subject to you returning the SOFTWARE to CITRIX or an authorized reseller) will be, at the sole option of CITRIX and subject to applicable law, to replace the media and/or SOFTWARE or to refund the purchase price and terminate this AGREEMENT.
</li></ol>
TO THE EXTENT PERMITTED BY APPLICABLE LAW AND EXCEPT FOR THE ABOVE LIMITED WARRANTY FOR SOFTWARE, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO SOFTWARE AND SUBSCRIPTION ANY CONDITIONS OF QUALITY, AVAILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE IS NOT DESIGNED, MANUFACTURED, OR INTENDED FOR USE OR DISTRIBUTION WITH ANY EQUIPMENT THE FAILURE OF WHICH COULD LEAD DIRECTLY TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE. YOU ASSUME THE RESPONSIBILITY FOR THE SELECTION OF THE SOFTWARE AND HARDWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE AND HARDWARE.
<ol>
<li>PROPRIETARY RIGHTS. No title to or ownership of the software is transferred to you. CITRIX and/or its licensors own and retain all title and ownership of all intellectual property rights in and to the SOFTWARE, including any adaptations or copies. You acquire only a limited license to use the software.

</li><li>EXPORT RESTRICTION. You agree that you will not export, re-export, or import the SOFTWARE in any form without the appropriate government licenses. You understand that under no circumstances may the SOFTWARE be exported to any country subject to US embargo or to US designated denied persons or prohibited entities or US specially designated nationals.

</li><li>LIMITATION OF LIABILITY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, YOU AGREE THAT NEITHER CITRIX NOR ITS AFFILIATES, SUPPLIERS, OR AUTHORIZED DISTRIBUTORS SHALL BE LIABLE FOR ANY LOSS OF DATA OR PRIVACY, LOSS OF INCOME, LOSS OF OPPORTUNITY OR PROFITS, COST OF RECOVERY, LOSS ARISING FROM YOUR USE OF THE SOFTWARE, OR DAMAGE ARISING FROM YOUR PARTICIPATION IN HOSTING OR USE OF THIRD PARTY SOFTWARE OR HARDWARE OR ANY OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT, OR THE USE OF THE SOFTWARE, REFERENCE MATERIALS, OR ACCOMPANYING DOCUMENTATION, OR YOUR EXPORTATION, RE-EXPORTATION, OR IMPORTATION OF THE SOFTWARE, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF CITRIX, ITS AFFILIATES, SUPPLIERS, OR AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE LIABILITY OF CITRIX, ITS AFFILIATES, SUPPLIERS, OR AUTHORIZED DISTRIBUTORS EXCEED THE AMOUNT PAID FOR THE SOFTWARE AT ISSUE. YOU ACKNOWLEDGE THAT THE LICENSE FEE REFLECTS THIS ALLOCATION OF RISK. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. For purposes of this Agreement, the term &quot;CITRIX AFFILIATE&quot; shall mean any legal entity fifty percent (50%) or more of the voting interests in which are owned directly or indirectly by Citrix Systems, Inc. Affiliates, suppliers, and authorized distributors are intended to be third party beneficiaries of this AGREEMENT.

</li><li>TERMINATION. This AGREEMENT is effective until terminated. You may terminate this AGREEMENT at any time by removing the SOFTWARE from your computers and destroying all copies and providing written notice to Citrix with the serial numbers of the terminated licenses. Citrix may terminate this AGREEMENT at any time for your breach of this AGREEMENT. Unauthorized copying of the SOFTWARE or the accompanying documentation or otherwise failing to comply with the license grant of this AGREEMENT will result in automatic termination of this AGREEMENT and will make available to CITRIX all other legal remedies. You agree and acknowledge that your material breach of this AGREEMENT shall cause CITRIX irreparable harm for which monetary damages alone would be inadequate and that, to the extent permitted by applicable law, Citrix shall be entitled to injunctive or equitable relief without the need for posting a bond. Upon termination of this AGREEMENT, the license granted herein will terminate and you must immediately destroy the SOFTWARE and accompanying documentation, and all back-up copies thereof.

</li><li>U.S. GOVERNMENT END-USERS. If you are a U.S. Government agency, in accordance with Section 12.212 of the Federal Acquisition Regulation (48 CFR 12.212 (October 1995)) and Sections 227.7202-1 and 227.7202-3 of the Defense Federal Acquisition Regulation Supplement (48 CFR 227.7202-1, 227.7202-3 (June 1995)), you hereby acknowledge that the SOFTWARE constitutes &quot;Commercial Computer Software&quot; and that the use, duplication, and disclosure of the SOFTWARE by the U.S. Government or any of its agencies is governed by, and is subject to, all of the terms, conditions, restrictions, and limitations set forth in this standard commercial license AGREEMENT. In the event that, for any reason, Sections 12.212, 227.7202-1 or 227.7202-3 are deemed not applicable, you hereby acknowledge that the Government&#39;s right to use, duplicate, or disclose the SOFTWARE are &quot;Restricted Rights&quot; as defined in 48 CFR Section 52.227-19(c)(1) and (2) (June 1987), or DFARS 252.227-7014(a)(14) (June 1995), as applicable. Manufacturer is Citrix Systems, Inc., 851 West Cypress Creek Road, Fort Lauderdale, Florida, 33309.

</li><li>AUTHORIZED DISTRIBUTORS AND RESELLERS. CITRIX authorized distributors and resellers do not have the right to make modifications to this Agreement or to make any additional representations, commitments, or warranties binding on CITRIX.

</li><li>CHOICE OF LAW AND VENUE. If licensor is Citrix Systems, Inc., this AGREEMENT is governed by the laws of the State of Florida without reference to conflict of laws principles and excluding the United Nations Convention on Contracts for the International Sale of Goods, and in any dispute arising out of this AGREEMENT, you consent to the exclusive personal jurisdiction and venue in the State and Federal courts within Broward County, Florida. If licensor is Citrix Systems International GmbH, this AGREEMENT is governed by the laws of Switzerland without reference to the conflict of laws principles, and excluding the United Nations Convention on Contracts for the International Sale of Goods, and in any dispute arising out of this AGREEMENT, you consent to the exclusive personal jurisdiction and venue of the competent courts in the Canton of Zurich. If any provision of this Agreement is invalid or unenforceable under applicable law, then it shall be to that extent deemed omitted and the remaining provisions will continue in full force and effect. To the extent a provision is deemed omitted, the parties agree to comply with the remaining terms of this AGREEMENT in a manner consistent with the original intent of the AGREEMENT.

</li><li>HOW TO CONTACT CITRIX. Should you have any questions concerning this AGREEMENT, or want to contact Citrix for any reason, write to Citrix at the following address: Citrix Systems, Inc., Customer Service, 851 West Cypress Creek Road, Ft. Lauderdale, Florida 33309; or Citrix Systems International GmbH, Rheinweg 9, CH-8200 Schaffhausen, Switzerland.

</li><li>TRADEMARKS. Citrix, MetaFrame, and MetaFrame XP are registered trademarks of Citrix Systems, Inc., in the US and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the US and other countries.
</li></ol></p>
-Eul:
##----------------------------------------
=Pkg: IPython 0.8.4 1.17 x86_64
=Sum: Rozšířený interaktivní shell v jazyce Python
+Des:
<!-- DT:Rich -->
<p>IPython provides a replacement for the interactive <a href="pkg://python"> Python</a> interpreter with
extra functionality.
</p><p>
Main features:
<ul>
<li>Comprehensive object introspection.
</li><li>Input history that is persistent across sessions.
</li><li>Caching of output results during a session with automatically generated references.
</li><li>Readline-based name completion.
</li><li>Extensible system of &#39;magic&#39; commands for controlling the environment and performing many tasks related either to IPython or the operating system.
</li><li>Configuration system with easy switching between different setups (simpler than changing <tt>$PYTHONSTARTUP</tt> environment variables every time).
</li><li>Session logging and reloading.
</li><li>Extensible syntax processing for special purpose situations.
</li><li>Access to the system shell with user-extensible alias system.
</li><li>Easily embeddable in other Python programs.
</li><li>Integrated access to the pdb debugger and the Python profiler.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: IlmBase 1.0.1 40.22 x86_64
=Sum: Base library for ILM software (OpenEXR)
+Des:
<!-- DT:Rich -->
<p>Base library for Industrial Light &amp; Magic software (OpenEXR).
<ul>
<li>Half is a class that encapsulates our 16-bit floating-point format.
</li><li>IlmThread is a thread abstraction library for use with OpenEXR and other software packages.  It currently supports pthreads and Windows threads.
</li><li>Imath implements 2D and 3D vectors, 3x3 and 4x4 matrices, quaternions and other useful 2D and 3D math functions.
</li><li>Iex is an exception-handling library.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ImageMagick 6.4.3.6 7.22.1 x86_64
=Sum: Prohlížeč a převodník obrázků
+Des:
<!-- DT:Rich -->
<p>ImageMagic je bohatá sbírka nástrojů a knihoven pro čtení/zápis a
manipulaci s obrázky v mnoha formátech včetně TIFF, JPEG, PNG, PDF,
PhotoCD a GIF. S ImageMagic můžete dynamicky vytvářet obrázky vhodné
pro webové aplikace. V programu lze měnit rozlišení, otáčet, ostřit, měnit
barevnost nebo přidat zvláštní efekty a ukládat v mnoha formátech.
Zpracování obrázků lze spouštět z příkazové řádky nebo volat funkce z
C, C++ a PERLu.
</p>
-Des:
##----------------------------------------
=Pkg: LibVNCServer 0.9.1 154.24 x86_64
=Sum: VNC vývojová knihovna
+Des:
<!-- DT:Rich -->
<p>VNC is a set of programs using the RFB (Remote Frame Buffer) protocol. They
are designed to &quot;export&quot; a frame buffer via the network.
It is already in wide use for administration, but it is not that easy to program a server yourself.
This has been changed by LibVNCServer.
</p><p>
X.org already has a virtual Xvnc server which you can start as an own
screen (e.g. :1) and connect to with a VNC client (e.g. vncviewer from
tightvnc).
The x11vnc binary (that allows you to export the window of a real running
X11 server) has been split off into its own package on 2007-07-16.
</p>
-Des:
##----------------------------------------
=Pkg: Mesa-32bit 7.11.2 0.5.31 x86_64
=Sum: Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL.* To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc.(SGI). However, the author does not possess an OpenGL license from SGI, and makes no claim that Mesa is in any way a compatible replacement for OpenGL or associated with SGI. Those who want a licensed implementation of OpenGL should contact a licensed vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It&#39;s just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: Mesa 7.11.2 0.5.31 x86_64
=Sum: Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL.* To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc.(SGI). However, the author does not possess an OpenGL license from SGI, and makes no claim that Mesa is in any way a compatible replacement for OpenGL or associated with SGI. Those who want a licensed implementation of OpenGL should contact a licensed vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It&#39;s just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: MesaGLw-32bit 7.2 1.5.44 x86_64
=Sum: Mesa Widget library
+Des:
<!-- DT:Rich -->
<p>Widget library for Mesa.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw 7.2 1.5.44 x86_64
=Sum: Mesa Widget library
+Des:
<!-- DT:Rich -->
<p>Widget library for Mesa.
</p>
-Des:
##----------------------------------------
=Pkg: ModemManager 0.4 3.12.4 x86_64
=Sum: DBus interface for modem handling
+Des:
<!-- DT:Rich -->
<p>DBus interface for modem handling. Provides a standard abstracted API (over DBus) to communicate with all sorts of modems (landline, GSM, CDMA).
</p>
-Des:
##----------------------------------------
=Pkg: MozillaFirefox 10.0 0.3.2 x86_64
=Sum: Prohlížeč Mozilla Firefox
+Des:
<!-- DT:Rich -->
<p>Mozilla Firefox is a standalone web browser designed for standards compliance and performance. Its functionality can be enhanced via a plethora of extensions.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaFirefox-branding-SLED 7 0.6.7.7 x86_64
=Sum: SLED branding of MozillaFirefox
+Des:
<!-- DT:Rich -->
<p>This package provides SLED Look and Feel for MozillaFirefox.
</p>
-Des:
##----------------------------------------
=Pkg: MozillaFirefox-translations 10.0 0.3.2 x86_64
=Sum: Translations for MozillaFirefox
+Des:
<!-- DT:Rich -->
<p>This package contains several optional languages for the user interface of
MozillaFirefox.
</p>
-Des:
##----------------------------------------
=Pkg: MyODBC-unixODBC 3.51.26r1127 1.25 x86_64
=Sum: ODBC Interface for Communication with MySQL Compiled with UnixODBC
+Des:
<!-- DT:Rich -->
<p>MyODBC 2.50 je rozhraní pro komunikaci s MySQL. Je jedním z nejznámnějších ODBC ovladačů v open source a používá ho mnoho uživatelů pro přístup k funkcím MySQL.
Je kompilován s unixODBC.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager 0.7.1_git20090811 3.20.5 x86_64
=Sum: Network Link Manager and User Applications
+Des:
<!-- DT:Rich -->
<p>NetworkManager attempts to keep an active network connection available at all
times.  The point of NetworkManager is to make networking configuration and
setup as painless and automatic as possible.  If using DHCP, NetworkManager is
intended to replace default routes, obtain IP addresses from a DHCP server, and
change name servers whenever it sees fit.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-glib 0.7.1_git20090811 3.20.5 x86_64
=Sum: Libraries for adding NetworkManager support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
Network Manager functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-gnome 0.7.1 5.22.28 x86_64
=Sum: GNOME applications for use with NetworkManager
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje nástroje a aplikace pro práci s NetworkManagerem
v GNOME včetně appletu pro bezdrátové sítě.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-kde4 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-kde4-lang 0.9.svn1043876 1.1.97 x86_64
=Sum: Languages for package NetworkManager-kde4
+Des:
<!-- DT:Rich -->
<p>Provides translations to the package NetworkManager-kde4
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-kde4-libs 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-novellvpn 0.7.2.r1138 1.7.65 x86_64
=Sum: VPN support for Turnpike
+Des:
<!-- DT:Rich -->
<p>NetworkManager-novellvpn provides VPN support to NetworkManager for Turnpike.
</p><p>
With NetworkManager-novellvpn, NetworkManager could configure and connect the
IPSec based VPN Server, such as Nortel&#39;s VPN Server(also need
novell-nortelplugins package).
</p><p>
The NetworkManager will make use of the &#39;nvpn&#39; tool(turnpike) to communicate
with &#39;racoon&#39;(novell-ipsec-tools) for connecting to IPSec based VPN Server.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-novellvpn-gnome 0.7.2.r1138 1.7.65 x86_64
=Sum: VPN support for Turnpike
+Des:
<!-- DT:Rich -->
<p>NetworkManager-novellvpn-gnome is GNOME-based front-end of NetworkManager-novellvpn. It provides interface for configuring Novell related VPN in NetworkManager.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-novellvpn-kde4 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-openvpn 0.7.1 3.5.1 x86_64
=Sum: NetworkManager VPN support for OpenVPN
+Des:
<!-- DT:Rich -->
<p>NetworkManager-openvpn provides VPN support to NetworkManager for OpenVPN.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-openvpn-gnome 0.7.1 3.5.1 x86_64
=Sum: NetworkManager VPN support for OpenVPN
+Des:
<!-- DT:Rich -->
<p>NetworkManager-openvpn provides VPN support to NetworkManager for OpenVPN.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-openvpn-kde4 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-pptp 0.7.1 3.3.25 x86_64
=Sum: NetworkManager VPN support for PPTP
+Des:
<!-- DT:Rich -->
<p>NetworkManager-pptp provides VPN support to NetworkManager for PPTP.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-pptp-gnome 0.7.1 3.3.25 x86_64
=Sum: NetworkManager VPN support for PPTP
+Des:
<!-- DT:Rich -->
<p>NetworkManager-pptp provides VPN support to NetworkManager for PPTP.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-pptp-kde4 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-vpnc 0.7.1 4.3.27 x86_64
=Sum: NetworkManager VPN Support for vpnc
+Des:
<!-- DT:Rich -->
<p>NetworkManager-vpnc obsahuje VPN podporu pro NetowkrManager.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-vpnc-gnome 0.7.1 4.3.27 x86_64
=Sum: NetworkManager VPN Support for vpnc
+Des:
<!-- DT:Rich -->
<p>NetworkManager-vpnc obsahuje VPN podporu pro NetowkrManager.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-vpnc-kde4 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>Cisco VPN plugin for the KNetworkManager KDE 4 applet and connection editor for controlling network connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: OpenEXR 1.6.1 83.17.1 x86_64
=Sum: Knihovna pro práci s EXR (16 bitový formát)
+Des:
<!-- DT:Rich -->
<p>OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light &amp; Magic for use in computer imaging applications.
<ul>
<li>exrheader, a utility for dumping header information
</li><li>exrstdattr, a utility for modifying OpenEXR standard attributes
</li><li>exrmaketiled, for generating tiled and rip/mipmapped images
</li><li>exrenvmap, for creating OpenEXR environment maps
</li><li>exrmakepreview, for creating preview images for OpenEXR files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenIPMI 2.0.16 0.10.4 x86_64
=Sum: OpenIPMI
+Des:
<!-- DT:Rich -->
<p>OpenIPMI is an effort to create a full-function IPMI system to
allow full access to all IPMI information on a server and to
abstract it to a level that makes it easy to use.
</p><p>
OpenIPMI consists of two main parts: a device driver that is
included in the Linux kernel and a user-level library that
provides a higher-level abstraction of IPMI and generic
services that can be used on any operation system. This package
contains the user-level library part. This OpenIPMI library
also includes the ipmicmd program, a small program that lets
you inject and receive messages.
</p>
-Des:
##----------------------------------------
=Pkg: PackageKit 0.3.14 2.23.126 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: PackageKit-gstreamer-plugin 0.3.14 2.23.126 x86_64
=Sum: Simple software installation management software for codecs
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating
software on your computer easier.  The primary design goal is to unify
all the software graphical tools used in different distributions, and
use some of the latest technology like PolicyKit to make the process
suck less.
</p>
-Des:
##----------------------------------------
=Pkg: PackageKit-lang 0.3.14 2.23.126 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit 0.9 14.39.1 x86_64
=Sum: Authorization Toolkit
+Des:
<!-- DT:Rich -->
<p>PolicyKit is a toolkit for defining and handling authorizations. It is used for allowing unprivileged processes to speak to privileged processes.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-32bit 0.9 14.39.1 x86_64
=Sum: Authorization Toolkit
+Des:
<!-- DT:Rich -->
<p>PolicyKit is a toolkit for defining and handling authorizations. It is used for allowing unprivileged processes to speak to privileged processes.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-doc 0.9 14.39.2 x86_64
=Sum: Documentation for PolicyKit
+Des:
<!-- DT:Rich -->
<p>PolicyKit is a toolkit for defining and handling authorizations. It is used for allowing unprivileged processes to speak to privileged processes.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-gnome 0.9.2 13.7.46 x86_64
=Sum: PolicyKit integration for the GNOME desktop
+Des:
<!-- DT:Rich -->
<p>PolicyKit-gnome provides a GNOME integration library and tools for PolicyKit including an Authentication Agent that matches the look and feel of the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-gnome-libs 0.9.2 13.7.46 x86_64
=Sum: Libraries provided by PolicyKit-gnome
+Des:
<!-- DT:Rich -->
<p>Libraries provided by PolicyKit-gnome.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-gnome-libs-32bit 0.9.2 13.7.46 x86_64
=Sum: Libraries provided by PolicyKit-gnome
+Des:
<!-- DT:Rich -->
<p>Libraries provided by PolicyKit-gnome.
</p>
-Des:
##----------------------------------------
=Pkg: SDL 1.2.13 104.32 x86_64
=Sum: Knihovna 'Simple DirectMedia Layer'
+Des:
<!-- DT:Rich -->
<p>Simple DirectMedia Layer je knihovna poskytující obecné API pro přístup
k zvuku, klávesnici, myši a framebufferu videokarty na různých platformách.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_net 1.2.7 2.21 x86_64
=Sum: Simple DirectMedia Layer -- síťová knihovna
+Des:
<!-- DT:Rich -->
<p>Malá multi platformní SDL síťová knihovna 
</p>
-Des:
##----------------------------------------
=Pkg: TeX-Guy 1.3.1 97.28 x86_64
=Sum: DVI knihovna, DVI nástroje pro zobrazování a tisk
+Des:
<!-- DT:Rich -->
<p>Balík TeX-Guy obsahuje knihovnu pro interpretaci DVI souborů
(DVIlib) a některé programy pro zborazování DVI souborů v X11 a
pro tisk DVI souborů.
<ul>
<li>Doporučujeme  pro X11 používat &quot;xgdvi&quot;, &quot;spawx11&quot; nebo &quot;spawg&quot;,
protože ty podporují anti aliasing.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: VFlib3 3.6.14 16.19 x86_64
=Sum: Knihovna písem
+Des:
<!-- DT:Rich -->
<p>VFlib je knihovna s fonty, která je napsána v C a obsahuje množství funkcí
pro vytváření bitmap z písem. Zvláštní funkcí pak je přístup k písmům
v mnoha rozdílných formátech přes jednotné rozhraní.
</p><p>
VFlib podporuje následující formáty:
TeX fonty:       PK, GF, VF, TFM
Omega TeX fonty: OFM (level 0), OVF
X Window fonty:  PCF, BDF
jiné fonty:     TrueType, Type 1, HBF, Syotai Club, JG, ekanji
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker 0.92.0 204.17 x86_64
=Sum: Barevný a flexibilní správce oken
+Des:
<!-- DT:Rich -->
<p>Window Maker is a colorful and flexible window manager and thedesignnated successor of AfterStep.
nFor more details, check http://www.windowmaker.org.
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker-applets 1.0 824.22 x86_64
=Sum: Window Maker Applets
+Des:
<!-- DT:Rich -->
<p>Množství malých aplikací pro Window Maker.
</p>
-Des:
##----------------------------------------
=Pkg: a2ps 4.13 1326.35.1 x86_64
=Sum: Konvertor ASCII textu do PostScriptu 
+Des:
<!-- DT:Rich -->
<p>a2ps converts ASCII text into PostScript. This feature is used by
apsfilter, for example, to pretty-print ASCII text.
</p><p>
Warning: a2ps is not able to convert complex unicode (UTF-8)
text to PostScript.  Only language text which can be converted
from UTF-8 to latin encodings are supported.
</p>
-Des:
##----------------------------------------
=Pkg: aaa_base 11 6.65.1 x86_64
=Sum: Základní balíček SUSE Linuxu
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správnou funkci a správu vašeho
systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje několik důležitých konfiguračních souborů a
hlavní skripty (jako SuSEconfig).
</p>
-Des:
##----------------------------------------
=Pkg: aalib 1.4.0 475.17 x86_64
=Sum: Knihovna ASCII art grafiky
+Des:
<!-- DT:Rich -->
<p>AA-lib je nízkoúrovňová grafická knihovna.
Od jiných grafických knihoven se liší tím, že nevyžaduje žádné
grafické zařízení. Místo tradičního grafického výstupu totiž používá
výkonný vykreslovač ASCII-art grafiky.
</p>
-Des:
##----------------------------------------
=Pkg: aalib-32bit 1.4.0 475.17 x86_64
=Sum: Knihovna ASCII art grafiky
+Des:
<!-- DT:Rich -->
<p>AA-lib je nízkoúrovňová grafická knihovna.
Od jiných grafických knihoven se liší tím, že nevyžaduje žádné
grafické zařízení. Místo tradičního grafického výstupu totiž používá
výkonný vykreslovač ASCII-art grafiky.
</p>
-Des:
##----------------------------------------
=Pkg: accerciser 1.8.0 1.1.94 x86_64
=Sum: Accessibility debugging tool
+Des:
<!-- DT:Rich -->
<p>Accerciser is an interactive Python accessibility explorer for the GNOME
desktop. It uses AT-SPI to inspect and control widgets, allowing you to check
if an application is providing correct information to assistive technologies
and automated test frameworks. Accerciser has a simple plugin framework which
you can use to create custom views of accessibility information.
</p><p>
In essence, Accerciser is a next generation at-poke tool.
</p>
-Des:
##----------------------------------------
=Pkg: accerciser-lang 1.8.0 1.1.94 x86_64
=Sum: Accessibility debugging tool
+Des:
<!-- DT:Rich -->
<p>Accerciser is an interactive Python accessibility explorer for the GNOME
desktop. It uses AT-SPI to inspect and control widgets, allowing you to check
if an application is providing correct information to assistive technologies
and automated test frameworks. Accerciser has a simple plugin framework which
you can use to create custom views of accessibility information.
</p><p>
In essence, Accerciser is a next generation at-poke tool.
</p>
-Des:
##----------------------------------------
=Pkg: acl 2.2.47 30.34.29 x86_64
=Sum: Příkazy pro práci s POSIX ACL
+Des:
<!-- DT:Rich -->
<p>Příkazy getfacl a setfacl se používají pro zjištění a nastavení POSIX ACL.
</p>
-Des:
##----------------------------------------
=Pkg: acpid 1.0.6 91.16.1 x86_64
=Sum: Spouští činnosti na základě ACPI událostí.
+Des:
<!-- DT:Rich -->
<p>ACPID je flexibilní a rozšiřitelný démon pro doručování ACPI událostí.
Čte ze souboru (/proc/acpi/event) a když nastane událost, spustí
přednastavený program pro zpracování.
Spouštěcí skript zavede všechny potřebné moduly.
</p><p>
Nastavuje se v /etc/sysconfig/powermanagement.
</p>
-Des:
##----------------------------------------
=Pkg: aide 0.13.1 40.14 x86_64
=Sum: Detektor narušení bezpečnosti systému
+Des:
<!-- DT:Rich -->
<p>AIDE (Advanced Intrusion Detection Environment) je detektor narušení
bezpečnosti systému, který kontroluje integritu souborů.
</p>
-Des:
##----------------------------------------
=Pkg: akonadi-runtime 1.2.1 1.1.87 x86_64
=Sum: PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the data files of Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: akregator 4.3.5 0.6.2 x86_64
=Sum: Feed Reader for KDE
+Des:
<!-- DT:Rich -->
<p>aKregator provides easy handling of multiple news sources. It also integrates into Kontact and Konqueror.
</p>
-Des:
##----------------------------------------
=Pkg: alacarte 0.12.4 1.2.9 x86_64
=Sum: Menu editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Alacarte is a simple freedesktop.org compliant menu editor for GNOME that lets you change your menus, simply and quickly. Just click and type to edit, add, and delete any menu entry.
</p>
-Des:
##----------------------------------------
=Pkg: alacarte-lang 0.12.4 1.2.9 x86_64
=Sum: Menu editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Alacarte is a simple freedesktop.org compliant menu editor for GNOME that lets you change your menus, simply and quickly. Just click and type to edit, add, and delete any menu entry.
</p>
-Des:
##----------------------------------------
=Pkg: alsa 1.0.18 16.24.1 x86_64
=Sum: Advanced Linux Sound Architecture
+Des:
<!-- DT:Rich -->
<p>ALSA stands for Advanced Linux Sound Architecture.  It supports many PCI, ISA PnP  and USB sound cards.
</p><p>
This package contains the ALSA init scripts to start the sound system on your Linux box.  To set it up, run yast2 or alsaconf.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-oss 1.0.17 1.15 x86_64
=Sum: ALSA-OSS Wrapper
+Des:
<!-- DT:Rich -->
<p>This package contains the wrapper library and script to run OSS applications using ALSA API.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-oss-32bit 1.0.17 1.15 x86_64
=Sum: ALSA-OSS Wrapper
+Des:
<!-- DT:Rich -->
<p>This package contains the wrapper library and script to run OSS applications using ALSA API.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-plugins 1.0.18 7.12.23 x86_64
=Sum: Extra Plug-Ins for the ALSA Library
+Des:
<!-- DT:Rich -->
<p>This package contains the extra plug-ins for the ALSA library.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-plugins-pulse 1.0.18 7.12.23 x86_64
=Sum: Pulseaudio Plug-In for the ALSA Library
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package contains the polypaudio I/O plug-in for the ALSA library.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-plugins-pulse-32bit 1.0.18 7.12.23 x86_64
=Sum: Pulseaudio Plug-In for the ALSA Library
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package contains the polypaudio I/O plug-in for the ALSA library.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-tools 1.0.18 1.27 x86_64
=Sum: Různé nástroje pro ALSA
+Des:
<!-- DT:Rich -->
<p>Různé nástroje pro ALSA včetně zavaděčů DSP.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-utils 1.0.18 6.32 x86_64
=Sum: Advanced Linux Sound Architecture Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains utility programs supporting ALSA, Advanced Linux Sound Architecture.
</p>
-Des:
##----------------------------------------
=Pkg: amarok 2.1.1 6.4.2 x86_64
=Sum: Přehrávač médií pro KDE
+Des:
<!-- DT:Rich -->
<p>Amarok is a media player for all kinds of media. This includes MP3, Ogg Vorbis, audio CDs, podcasts and streams. Play lists can be stored in .m3u or .pls files.
</p>
-Des:
##----------------------------------------
=Pkg: amarok-lang 2.1.1 6.4.2 x86_64
=Sum: Přehrávač médií pro KDE
+Des:
<!-- DT:Rich -->
<p>Amarok is a media player for all kinds of media. This includes MP3, Ogg Vorbis, audio CDs, podcasts and streams. Play lists can be stored in .m3u or .pls files.
</p>
-Des:
##----------------------------------------
=Pkg: amavisd-new 2.7.0 18.7.1 x86_64
=Sum: Vysoce výkonný virový skener pro e-mail
+Des:
<!-- DT:Rich -->
<p>Amavisd-new je vysoce výkonné rozhraní mezi MTA a kontrolorem obsahu (virovým skenerem či SpamAssassinem). K MTA promlouvá skrze (E)SMTP, LMTP či pomocné programy. Spolupracuje s následujícími MTA:
<ul>
<li>postfix
</li><li>sendmail (sendmail-milter)
</li><li>exim
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: amavisd-new-docs 2.7.0 18.7.1 x86_64
=Sum: Documentation for the High-Performance E-Mail Virus Scanner
+Des:
<!-- DT:Rich -->
<p>Amavisd-new is a high-performance interface between mailer (MTA) and content checkers: virus scanners or SpamAssassin. It talks to the MTA via (E)SMTP, LMTP, or by using helper programs.
</p><p>
This package contains the documentation and Relase-Notes.
</p>
-Des:
##----------------------------------------
=Pkg: ami 1.2.3 146.14 x86_64
=Sum: Korejský IMS (Input Method System) Ami
+Des:
<!-- DT:Rich -->
<p>Korejský IMS (Input Method System) Ami. Používá gtk+, podporuje režim dokování ve Windowmakeru.
</p>
-Des:
##----------------------------------------
=Pkg: amidic 1.2.3 146.14 x86_64
=Sum: Korejský IMS (Input Method System) Ami
+Des:
<!-- DT:Rich -->
<p>Korejský IMS (Input Method System) Ami. Používá gtk+, podporuje režim dokování ve Windowmakeru.
</p>
-Des:
##----------------------------------------
=Pkg: anthy 9100 166.31 x86_64
=Sum: Kana-Kanji konvertor
+Des:
<!-- DT:Rich -->
<p>Anthy (dříve známá jako &#39;Ancy&#39;):
</p><p>
Canna, FreeWnn a další jsou známé konvertory Kana-Kanji pro Unix na PC.
Původně byly vyvinuty na počátku devadesátých let pro japonské pracovní
stanice, vývoj se později téměř zastavil. Proto je v projektu Heke vytvářen svobodný
konvertor na zelené louce (kromě slovníku, který je vytvářen mimo projekt Heke).
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-docs 2.5.1.r1445 55.57.47 x86_64
=Sum: Balík s dokumentací k AppArmor
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje dokumentaci pro  AppArmor.
</p><p>
Tento balíček je součástí sady nástrojů, která se nazývala SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-parser 2.5.1.r1445 55.57.47 x86_64
=Sum: AppArmor parsovací nástroj uživatelské úrovně
+Des:
<!-- DT:Rich -->
<p>AppArmor Parser je uživatelský program používaný k načítání programových
profilů do jaderného modulu AppArmor Security.
</p><p>
Tento balíček je součástí sady nástrojů, která se nazývala SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-profile-editor 0.9.1 268.35 x86_64
=Sum: AppArmor profile editor
+Des:
<!-- DT:Rich -->
<p>A syntax highlighting editor for AppArmor profiles.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-utils 2.5.1.r1445 55.57.47 x86_64
=Sum: AppArmor User-Level Utilities Useful for Creating AppArmor Profiles
+Des:
<!-- DT:Rich -->
<p>This package provides the aa-logprof, aa-genprof, aa-autodep, aa-enforce, and aa-complain tools to assist with profile authoring. Besides it provides the aa-unconfined server information tool and the aa-eventd event reporting system.
It is part of a suite of tools that used to be named SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apport 0.114 12.7.10 x86_64
=Sum: Automatic crash handler
+Des:
<!-- DT:Rich -->
<p>Apport automatically collects data from crashed processes and compiles a
problem report in /var/crash/.
</p><p>
See http://opensuse.org/Interactive_Crash_Analysis for more information.
</p>
-Des:
##----------------------------------------
=Pkg: apport-crashdb-sle 0.114 0.7.6 x86_64
=Sum: Automatic crash handler
+Des:
<!-- DT:Rich -->
<p>Apport automatically collects data from crashed processes and compiles a
problem report in /var/crash/.
</p><p>
See http://opensuse.org/Interactive_Crash_Analysis for more information.
</p>
-Des:
##----------------------------------------
=Pkg: apport-gtk 0.114 12.7.10 x86_64
=Sum: GTK frontend for the apport crash report system
+Des:
<!-- DT:Rich -->
<p>GTK frontend for the apport crash report system
</p>
-Des:
##----------------------------------------
=Pkg: apport-qt 0.114 12.7.10 x86_64
=Sum: Qt4 frontend for the apport crash report system
+Des:
<!-- DT:Rich -->
<p>Qt4 frontend for the apport crash report system
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import and Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic online banking interface. It allows multiple back-ends (currently HBCI) and multiple front-ends (such as KDE, GNOME, or console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking-lang 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import and Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic online banking interface. It allows multiple back-ends (currently HBCI) and multiple front-ends (such as KDE, GNOME, or console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: ark 4.3.5 0.1.63 x86_64
=Sum: KDE Archiver Tool
+Des:
<!-- DT:Rich -->
<p>This is a KDE application to work with compressed archives.
</p>
-Des:
##----------------------------------------
=Pkg: art-sharp2 2.24.0 14.41 x86_64
=Sum: Mono bindings for libart
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for libart.
</p>
-Des:
##----------------------------------------
=Pkg: arts 1.5.10 13.26 x86_64
=Sum: Modulární softwarový syntetizátor
+Des:
<!-- DT:Rich -->
<p>Modulární softwarový syntetizátor. Umožňuje generování zvukových streamů
v reálném čase, má podporu MIDI a je snadno rozšiřitelný. Pro oddělení
GUI a syntézy používá technologii CORBA.
</p>
-Des:
##----------------------------------------
=Pkg: arts-32bit 1.5.10 13.26 x86_64
=Sum: Modulární softwarový syntetizátor
+Des:
<!-- DT:Rich -->
<p>Modulární softwarový syntetizátor. Umožňuje generování zvukových streamů
v reálném čase, má podporu MIDI a je snadno rozšiřitelný. Pro oddělení
GUI a syntézy používá technologii CORBA.
</p>
-Des:
##----------------------------------------
=Pkg: ash 1.6.1 45.8 x86_64
=Sum: Shell ash
+Des:
<!-- DT:Rich -->
<p>Shell ash (Almquist sh z NetBSD) pro Linux je malý (62K - bez řízení úloh)
shell kompatibilní s Bourne shellem. Neposkytuje všechny funkce
shellů jako je bash, tcsh a zsh. Je vhodný pro stroje s malou pamětí.
Pamatujte, že většina skriptů napsaných pro Linux používá některá
rozšíření shellu bash. Významnou výjimkou jsou startovací skripty
pro Slackware, protože ve Slackware se během instalace používá ash.
</p>
-Des:
##----------------------------------------
=Pkg: aspell 0.60.6 26.22 x86_64
=Sum: Volně šiřitelný program pro kontrolu pravopisu.
+Des:
<!-- DT:Rich -->
<p>GNU aspell kontroluje pravopis a je, svým způsobem, náhrada Ispellu.
Lze ho použít jako knihovnu nebo jako nezávislý korektor.
</p><p>
Pro slovníky používá sdílenou paměť a inteligentně zpracovává uživatelské
slovníky, pokud máte otevřeno více instancí programu.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-32bit 0.60.6 26.22 x86_64
=Sum: Volně šiřitelný program pro kontrolu pravopisu.
+Des:
<!-- DT:Rich -->
<p>GNU aspell kontroluje pravopis a je, svým způsobem, náhrada Ispellu.
Lze ho použít jako knihovnu nebo jako nezávislý korektor.
</p><p>
Pro slovníky používá sdílenou paměť a inteligentně zpracovává uživatelské
slovníky, pokud máte otevřeno více instancí programu.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-af 0.50.0 2.16 x86_64
=Sum: Afrikánský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Afrikánský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-ar 1.2.0 2.16 x86_64
=Sum: An Arabic Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>An Arabic dictionary for Aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-ca 0.60.1.20040130 2.16 x86_64
=Sum: Katalánský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Katalánský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-cs 0.60.0.20040614 2.16 x86_64
=Sum: Český slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Český slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-da 1.6.17 2.16 x86_64
=Sum: Dánský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Dánský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-de 0.60.20030222.1 2.16 x86_64
=Sum: Německý slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Německý slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-en 6.0 160.7 x86_64
=Sum: Anglický slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Anglický slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-es 1.9.1 2.16 x86_64
=Sum: Španělský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Španělský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-fi 0.7 2.16 x86_64
=Sum: Finský slovníkový balík
+Des:
<!-- DT:Rich -->
<p>Finský slovníkový balík
</p>
-Des:
##----------------------------------------
=Pkg: aspell-fo 0.52.2.16.1 2.16 x86_64
=Sum: Faerský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Faerský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-fr 0.50.3 2.16 x86_64
=Sum: Francouzský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Francouzský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-gu 0.03 2.16 x86_64
=Sum: A Gujarati Dictionary for Aspell
+Des:
<!-- DT:Rich -->
<p>GNU Aspell 0.60 Gujarati Dictionary Package
</p>
-Des:
##----------------------------------------
=Pkg: aspell-hi 0.02 2.16 x86_64
=Sum: Hindský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Hindský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-hu 0.99.4.2 2.16 x86_64
=Sum: Maďarský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Maďarský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-it 2.2_20050523 2.16 x86_64
=Sum: Italský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Italský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-nb 0.50.10 2.16 x86_64
=Sum: Norský (Bookmal) slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Norský (Bokmaal) slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-nl 1.00.7 2.16 x86_64
=Sum: Nizozemský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Nizozemský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-nn 0.50.11 2.16 x86_64
=Sum: Norský (Nynorsk) slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Norský (Nynorsk) slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-pl 0.60.2006.11.21 2.16 x86_64
=Sum: Polský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Polský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-pt_BR 0.60.20080707 2.16 x86_64
=Sum: A Brasilian Portuguese Dictionary for ASpell
+Des:
<!-- DT:Rich -->
<p>A Brasilian Portuguese dictionary for the ASpell spell checker.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-pt_PT 0.60.20070510 2.16 x86_64
=Sum: Portugalský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Portugalský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-ru 0.99.f7.1 2.16 x86_64
=Sum: Ruský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Ruský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-sk 2.00 2.16 x86_64
=Sum: Slovenský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Slovenský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-sv 0.51.0 2.16 x86_64
=Sum: Švédský slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Švédský slovník pro aspell.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-zu 0.50 2.16 x86_64
=Sum: Zulu slovník pro aspell
+Des:
<!-- DT:Rich -->
<p>Zulu slovník pro aspell
</p>
-Des:
##----------------------------------------
=Pkg: at 3.1.8 1069.18.2 x86_64
=Sum: Plánovač úloh
+Des:
<!-- DT:Rich -->
<p>Program, který umožňuje spouštění úloh v zadaném čase.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi 1.28.1 0.1.161 x86_64
=Sum: Assistive Technology Service Provider Interface
+Des:
<!-- DT:Rich -->
<p>Takto knihovna založená na ATK je rozhraním pro aplikace používající toolkity pro zlepšení přístupnosti.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi-lang 1.28.1 0.1.161 x86_64
=Sum: Assistive Technology Service Provider Interface
+Des:
<!-- DT:Rich -->
<p>Takto knihovna založená na ATK je rozhraním pro aplikace používající toolkity pro zlepšení přístupnosti.
</p>
-Des:
##----------------------------------------
=Pkg: atk 1.28.0 1.2.28 x86_64
=Sum: Sada nástrojů s přístupovými funkcemi
+Des:
<!-- DT:Rich -->
<p>Šikovná knihovna s sadou přístupových funkcí. Pokud použijete ATK rozhraní, program nebo sada nástrojů může používat lupu, čtečku obrazovky a alternativní vstupní zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: atk-devel 1.28.0 1.2.28 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Hlavičkové soubory a knihovny pro vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: atk-lang 1.28.0 1.2.28 x86_64
=Sum: Sada nástrojů s přístupovými funkcemi
+Des:
<!-- DT:Rich -->
<p>Šikovná knihovna s sadou přístupových funkcí. Pokud použijete ATK rozhraní, program nebo sada nástrojů může používat lupu, čtečku obrazovky a alternativní vstupní zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: attr 2.4.43 1.18 x86_64
=Sum: Commands for Manipulating Extended Attributes
+Des:
<!-- DT:Rich -->
<p>Sada programů pro manipulaci s rozšířenými atributy souborového systému.
Přesněji příkazy &#39;getfattr(1)&#39; a &#39;setfattr(1)&#39;.
Obsažen je také příkaz attr(1), který je kompatibilní se stejnojmenným nástrojem z SGI IRIX.
</p>
-Des:
##----------------------------------------
=Pkg: audiofile 0.2.6 142.11.42 x86_64
=Sum: Knihovna pro práci se zvukovými soubory
+Des:
<!-- DT:Rich -->
<p>Reimplementace zvukové knihovny pro SGI. Všechny vlastnosti
knihovny SGI Audio File Library nejsou dosud implementovány.
</p><p>
</p><p>
Tato knihovna umožňuje zpracování zvukových dat v mnoha obvyklých
formátech (v současnosti AIFF, AIFC, WAVE a NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audiofile-32bit 0.2.6 142.11.42 x86_64
=Sum: Knihovna pro práci se zvukovými soubory
+Des:
<!-- DT:Rich -->
<p>Reimplementace zvukové knihovny pro SGI. Všechny vlastnosti
knihovny SGI Audio File Library nejsou dosud implementovány.
</p><p>
</p><p>
Tato knihovna umožňuje zpracování zvukových dat v mnoha obvyklých
formátech (v současnosti AIFF, AIFC, WAVE a NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audit 1.7.7 5.21.11 x86_64
=Sum: User space nástroje pro auditování jádra 2.6
+Des:
<!-- DT:Rich -->
<p>The audit package contains the user space utilities for storing and processing the audit records generated by the audit subsystem in the Linux kernel.
</p>
-Des:
##----------------------------------------
=Pkg: audit-libs 1.7.7 5.21.11 x86_64
=Sum: User space nástroje pro auditování jádra 2.6
+Des:
<!-- DT:Rich -->
<p>The audit package contains the user space utilities for storing and processing the audit records generated by the audit subsystem in the Linux kernel.
</p>
-Des:
##----------------------------------------
=Pkg: audit-libs-32bit 1.7.7 5.21.11 x86_64
=Sum: User space nástroje pro auditování jádra 2.6
+Des:
<!-- DT:Rich -->
<p>The audit package contains the user space utilities for storing and processing the audit records generated by the audit subsystem in the Linux kernel.
</p>
-Des:
##----------------------------------------
=Pkg: autofs 5.0.5 11.21.1 x86_64
=Sum: Automounter realizovaný v jádře
+Des:
<!-- DT:Rich -->
<p>Autofs je automounter pro Linux realizovaný v jádře. Je stále ve
vývoji, ale podle všeho dosud implementované funkce fungují dobře.
Dosud není dostupný ani dostatek dokumentace. Pomoc při jejím vytváření
je vítána. Tento balíček slouží jako náhrada balíčku amd.
</p>
-Des:
##----------------------------------------
=Pkg: avahi 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-lang 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-mono 0.6.23 11.19.36 x86_64
=Sum: Mono Bindings for avahi, the D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for avahi.
Avahi is an implementation of the DNS Service Discovery and MulticastDNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
The Avahi mDNS responder is now feature complete, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: awesfx 0.5.1a 8.15 x86_64
=Sum: Programy SoundFont pro SB AWE32/64 a ovladače Emu10k1
+Des:
<!-- DT:Rich -->
<p>Balíček AWESFX obsahuje programy pro ovládání wavetable funkcí
zvukových karet SB AWE32/64 a Emu10k1.
</p>
-Des:
##----------------------------------------
=Pkg: babl-0_0 0.0.22 4.22 x86_64
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: backup-manager 0.1.0 18.37.1 x86_64
=Sum: A simple backup application for GNOME
+Des:
<!-- DT:Rich -->
<p>A simple backup application for GNOME
</p>
-Des:
##----------------------------------------
=Pkg: backup-manager-lang 0.1.0 18.37.1 x86_64
=Sum: A simple backup application for GNOME
+Des:
<!-- DT:Rich -->
<p>A simple backup application for GNOME
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1 2.0.1 2.15.62 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-engine-gstreamer 2.0.1 2.15.62 x86_64
=Sum: GStreamer engine support for Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides the playback engine used by Banshee, built on the GStreamer multimedia framework.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-io-gio 2.0.1 2.15.62 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
This package provides support for importing non-local files into Banshee, eg over a ssh mount or similar.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-platform-gnome 2.0.1 2.15.62 x86_64
=Sum: GNOME platform support for Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides platform integration with the GNOME Desktop for Banshee. Most notably it provides a configuration backend to GConf, so all user settings can be stored there. Other GNOME specific integration hooks are provided as well.
</p><p>
Users running Banshee on GNOME are recommended to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-platform-unix 2.0.1 2.15.62 x86_64
=Sum: UNIX platform support for Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides many optimizations for UNIX based platforms. In particular, it provides a POSIX IO layer that performs better than the default System.IO/.NET IO layer provided in the base banshee-1 package.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-client-classic 2.0.1 2.15.62 x86_64
=Sum: Banshee client providing the classic interface
+Des:
<!-- DT:Rich -->
<p>The Classic Banshee client provides a familiar user interface with a source list and three-pane layout for browsing and exploring media. This client is the most feature rich, but does not sacrifice usability.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-client-muinshee 2.0.1 2.15.62 x86_64
=Sum: Banshee client modeled after the Muine music player interface
+Des:
<!-- DT:Rich -->
<p>The Muinshee Banshee client provides a user interface modeled directly after the old GNOME Muine media player.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-core 2.0.1 2.15.62 x86_64
=Sum: Core Banshee platform libraries, services, and resources
+Des:
<!-- DT:Rich -->
<p>This package provides core libraries, services, and resources for building Banshee clients and user experiences.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-dmp 2.0.1 2.15.62 x86_64
=Sum: Digital Media Player support for Banshee
+Des:
<!-- DT:Rich -->
<p>Core support for Digital Media Player support. Includes generic USB mass storage device support.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-dmp-apple-devices 2.0.1 2.15.62 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
Support for iPod(R) devices including the iPod Classic(R) and iPod Nano(R). Does not support iPod Touch(R) or iPhone(R).
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-dmp-mtp 2.0.1 2.15.62 x86_64
=Sum: MTP/PlaysForSure Digital Media Player support for Banshee
+Des:
<!-- DT:Rich -->
<p>Support for various MTP/PlaysForSure/Certified For Windows Vista(R) devices as provided by libmtp.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-extensions-default 2.0.1 2.15.62 x86_64
=Sum: Extra features extending the Banshee Media Player
+Des:
<!-- DT:Rich -->
<p>This package provides a number of useful features for Banshee, including a Play Queue, Last.fm streaming, Last.fm Audioscrobbling, and Multimedia Key support. This package is highly recommended as it greatly enhances the end user experience of Banshee.
</p><p>
Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-lang 2.0.1 2.15.62 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-novell-aac 0.10.6 1.37.22 x86_64
=Sum: Banshee plugin for AAC encoding and decoding
+Des:
<!-- DT:Rich -->
<p>Provides the Novell AAC plugin for encoding and decoding MPEG-4 Audio in the Banshee Media Player.
</p>
-Des:
##----------------------------------------
=Pkg: bash 3.2 147.9.13 x86_64
=Sum: GNU Bourne-Again Shell
+Des:
<!-- DT:Rich -->
<p>Bash je příkazový interpret kompatibilní s sh, který provádí příkazy
čtené ze standardního vstupu nebo ze souboru. Bash zahrnuje užitečné
vlastnosti z Korn a C shellu (ksh a csh). Bash vyhovuje standardu
&quot;IEEE Posix Shell and Tools specification&quot; (IEEE Working Group 1003.2).
</p>
-Des:
##----------------------------------------
=Pkg: bash-doc 3.2 147.9.13 x86_64
=Sum: Documentation how to Use the GNU Bourne-Again Shell
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation for using the
bourne shell interpreter Bash.
</p>
-Des:
##----------------------------------------
=Pkg: bc 1.06 838.15 x86_64
=Sum: GNU kalkulátor ovládaný textovými příkazy
+Des:
<!-- DT:Rich -->
<p>Program bc je aritmetický jazyk pro práci s libovolně přesnou aritmetikou
umožňující interaktivní provádění příkazů. Syntaxe se poněkud podobá
programovacímu jazyku C. Pomocí volby v příkazovém řádku je dostupná
standardní matematická knihovna. Je-li matematická knihovna používána,
je čtena před všemi ostatními vstupními soubory. bc pak načítá všechny
soubory uvedené v příkazovém řádku, a vyhodnocuje jejich obsah.
Potom bc čte ze standardního vstupu (obvykle z klávesnice).
</p><p>
Balíček obsahuje také program dc. Dc je kalkulátor, který podporuje
obrácenou polskou notaci a umožňuje výpočty s neomezenou přesností.
Umožňuje také definice maker. Normálně dc čte ze standardního vstupu,
ale může zpracovávat i soubory zadané v příkazovém řádku. Kalkulátor
s reversní polskou notací ukládá operandy na zásobník (push) dokud nenačte 
operátor. Poté vyjme z vrcholu zásobníku operandy (pop) a výsledek uloží
zpět na zásobník (push).
</p>
-Des:
##----------------------------------------
=Pkg: beagle 0.3.8 56.49.27 x86_64
=Sum: Aplikace pro vyhledávání v systému
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you might be looking for. Beagle is a Linux desktop-independent service which transparently and unobtrusively indexes your data in real-time.
</p><p>
Beagle supports many different data sources and file formats, including:<ul>
<li>Documents
</li><li>E-mails
</li><li>Web browsing history
</li><li>IM and IRC conversations
</li><li>RSS Feeds
</li><li>Images
</li><li>Videos
</li><li>Music files
</li><li>Archives and their contents
</li><li>Applications
</li><li>... and more.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-evolution 0.3.8 56.49.27 x86_64
=Sum: Evolution Plugin for the Desktop search application beagle
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. This plugin contains Evolution support for beagle.
</p>
-Des:
##----------------------------------------
=Pkg: beagle-firefox 0.3.8 56.49.27 x86_64
=Sum: Firefox Plugin for the Desktop search application beagle
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. This package contains a Plugin for using Beagle in Firefox.
</p>
-Des:
##----------------------------------------
=Pkg: beagle-gui 0.3.8 56.49.27 x86_64
=Sum: Graphical User Interface for the Desktop Search Application Beagle
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you are looking for. This package contains the graphical user interface.
</p>
-Des:
##----------------------------------------
=Pkg: beagle-index 11.0_20080516 99.19 x86_64
=Sum: Globální indexování v Beagle
+Des:
<!-- DT:Rich -->
<p>Index výchozích instalovaných souborů pro beagle.
</p><p>
Šetří čas nutný k indexaci připojením indexu balíků do hlavního indexu.
</p>
-Des:
##----------------------------------------
=Pkg: beagle-lang 0.3.8 56.49.27 x86_64
=Sum: Aplikace pro vyhledávání v systému
+Des:
<!-- DT:Rich -->
<p>Beagle is a search tool that ransacks your personal information space to find whatever you might be looking for. Beagle is a Linux desktop-independent service which transparently and unobtrusively indexes your data in real-time.
</p><p>
Beagle supports many different data sources and file formats, including:<ul>
<li>Documents
</li><li>E-mails
</li><li>Web browsing history
</li><li>IM and IRC conversations
</li><li>RSS Feeds
</li><li>Images
</li><li>Videos
</li><li>Music files
</li><li>Archives and their contents
</li><li>Applications
</li><li>... and more.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-quickfinder 1.0.1 4.41 x86_64
=Sum: QuickFinder backend aplikace Beagle
+Des:
<!-- DT:Rich -->
<p>This packages contains a Beagle Backend that allows you to search any QuickFinder server from the Beagle client.  This is especially usefull if you want to search files stored on a Novell Open Enterprise Server.  You can index the files with QuickFinder and access the search results on your desktop through Beagle.  You can even open the files for editing through a mount point.  To configure the QuickFinder Backend edit ~/.config/qfsearch/qfbeagled.cfg.
</p>
-Des:
##----------------------------------------
=Pkg: bin86 0.16.17 59.15 x86_64
=Sum: 8086 assembler a linker
+Des:
<!-- DT:Rich -->
<p>Assembler a Pinker 8086
</p>
-Des:
##----------------------------------------
=Pkg: bind-libs-32bit 9.6ESVR5P1 0.8.1 x86_64
=Sum: Sdílené knihovny pro BIND
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje sdílené knihovny pro implementaci DNS (Domain Name System) protokolu BIND (Berkeley Internet Name Domain).
</p>
-Des:
##----------------------------------------
=Pkg: bind-libs 9.6ESVR5P1 0.8.1 x86_64
=Sum: Sdílené knihovny pro BIND
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje sdílené knihovny pro implementaci DNS (Domain Name System) protokolu BIND (Berkeley Internet Name Domain).
</p>
-Des:
##----------------------------------------
=Pkg: bind-utils 9.6ESVR5P1 0.8.1 x86_64
=Sum: Programy pro dotazování a testování DNS
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje pomocné programy host, dig a nslookup používané
k testování a dotazování DNS (Domain Name System). BIND (Berkeley Internet Name Domain) DNS server najdete v balíčku bind.
</p>
-Des:
##----------------------------------------
=Pkg: binutils 2.21.1 0.7.25 x86_64
=Sum: GNU Binutils
+Des:
<!-- DT:Rich -->
<p>C compiler utilities: ar, as, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, and strip. These utilities are needed whenever you want to
compile a program or kernel.
</p>
-Des:
##----------------------------------------
=Pkg: biosdevname 0.3.8 0.15.46 x86_64
=Sum: Udev helper for naming devices per BIOS names
+Des:
<!-- DT:Rich -->
<p>biosdevname in its simplest form takes an kernel name name as an
argument, and returns the BIOS-given name it &quot;should&quot; be.  This is necessary
on systems where the BIOS name for a given device (e.g. the label on
the chassis is &quot;Gb1&quot;) doesn&#39;t map directly and obviously to the kernel
name (e.g. eth0).
</p><p>
You can enable/disable usage of biosdevname with boot option &quot;biosdevname=[0|1]&quot;
</p>
-Des:
##----------------------------------------
=Pkg: blktrace 1.0.3 0.4.2.2 x86_64
=Sum: Block IO tracer
+Des:
<!-- DT:Rich -->
<p>blktrace is a block layer IO tracing mechanism which provides detailed information about request queue operations up to user space. This is valuable for diagnosing and fixing performance or application problems relating to block layer io.
</p>
-Des:
##----------------------------------------
=Pkg: blt 2.4z 343.13 x86_64
=Sum: Rozšíření Tcl/Tk
+Des:
<!-- DT:Rich -->
<p>BLT - přídavná knihovna pro Tcl/Tk. Přidává některá ovládací tlačítka, geometrický manager a různé příkazy.
</p>
-Des:
##----------------------------------------
=Pkg: bluez 4.51 1.12.31 x86_64
=Sum: Bluetooth Stack for Linux
+Des:
<!-- DT:Rich -->
<p>The Bluetooth stack for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-alsa 4.51 1.12.31 x86_64
=Sum: Bluetooth Sound Support
+Des:
<!-- DT:Rich -->
<p>The package contains libraries for using bluetooth audio services.
</p><p>
The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-cups 4.51 1.12.31 x86_64
=Sum: CUPS ovladač pro Bluetooth tiskárny
+Des:
<!-- DT:Rich -->
<p>Obsahuje soubory potřebné pro systém CUPS při tisku na Bluetooth tiskárny.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-firmware 1.2 29.8 x86_64
=Sum: Bluetooth(TM) firmware
+Des:
<!-- DT:Rich -->
<p>Bluetooth(TM) firmware.
Balíček obsahuje obrazy firmwaru pro některé Bluetooth adaptéry.
Momentálně jsou podporovány:<ul>
<li>Broadcom Corporation BCM2033
</li><li>AVM Computersysteme Vertriebs GmbH BLUEFRITZ! USB
</li></ul>
BLUETOOTH obchodní značky jsou vlastnictvím Bluetooth SIG, Inc., U.S.A.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-gstreamer 4.51 1.12.51 x86_64
=Sum: Bluetooth Sound Support
+Des:
<!-- DT:Rich -->
<p>The package contains libraries for using bluetooth audio services.
</p><p>
The BLUETOOTH trademarks are owned by Bluetooth SIG, Inc., USA.
</p>
-Des:
##----------------------------------------
=Pkg: bogofilter 1.1.1 174.20.1 x86_64
=Sum: Bayesian Statistical Analyzator - rychlý antispamový analyzátor
+Des:
<!-- DT:Rich -->
<p>Bogofilter je Bayesian spam filter. Standardně vezme text ze standardního vstupu a provede statistickou kontrolu oproti seznamu &quot;dobrých&quot; a &quot;špatných&quot; slov a vrátí hodnotu, zda text je a nebo není spam. Je designován pomocí rychlých algoritmů a napsaný v jazyce C.
</p>
-Des:
##----------------------------------------
=Pkg: boinc-client 6.2.18 4.31.2 x86_64
=Sum: The Berkeley Open Infrastructure for Network Computing (BOINC)
+Des:
<!-- DT:Rich -->
<p>The Berkeley Open Infrastructure for Network Computing (BOINC) is an
open-source software platform which supports distributed computing,
primarily in the form of &quot;volunteer&quot; computing and &quot;desktop Grid&quot; computing.
It is well suited for problems which are often described as &quot;trivially
parallel&quot;.
</p><p>
BOINC is the underlying software used by projects such as SETI@home,
Einstein@Home, ClimatePrediciton.net, the World Community Grid, and many
other distributed computing projects.
</p>
-Des:
##----------------------------------------
=Pkg: boinc-gui 6.2.18 4.31.2 x86_64
=Sum: The Berkeley Open Infrastructure for Network Computing (BOINC)
+Des:
<!-- DT:Rich -->
<p>The Berkeley Open Infrastructure for Network Computing (BOINC) is an
open-source software platform which supports distributed computing,
primarily in the form of &quot;volunteer&quot; computing and &quot;desktop Grid&quot; computing.
It is well suited for problems which are often described as &quot;trivially
parallel&quot;.
</p><p>
BOINC is the underlying software used by projects such as SETI@home,
Einstein@Home, ClimatePrediciton.net, the World Community Grid, and many
other distributed computing projects.
</p>
-Des:
##----------------------------------------
=Pkg: boinc-gui-lang 6.2.18 4.31.2 x86_64
=Sum: The Berkeley Open Infrastructure for Network Computing (BOINC)
+Des:
<!-- DT:Rich -->
<p>The Berkeley Open Infrastructure for Network Computing (BOINC) is an
open-source software platform which supports distributed computing,
primarily in the form of &quot;volunteer&quot; computing and &quot;desktop Grid&quot; computing.
It is well suited for problems which are often described as &quot;trivially
parallel&quot;.
</p><p>
BOINC is the underlying software used by projects such as SETI@home,
Einstein@Home, ClimatePrediciton.net, the World Community Grid, and many
other distributed computing projects.
</p>
-Des:
##----------------------------------------
=Pkg: bonnie++ 1.02 413.22 x86_64
=Sum: Benchmark souborového systému podobný bonnie
+Des:
<!-- DT:Rich -->
<p>Nástroj pro měření výkonu souborového systému a pevného disku, který sestává z celé řady jednotlivých testů.
</p>
-Des:
##----------------------------------------
=Pkg: bonnie 1.4 474.28 x86_64
=Sum: Benchmark pro souborové systémy
+Des:
<!-- DT:Rich -->
<p>Bonnie je populární výkonnostní benchmark, který slouží pro porovnání
různých aspektů výkonnosti unixových systémů souborů.
</p>
-Des:
##----------------------------------------
=Pkg: boost-license 1.36.0 11.17 x86_64
=Sum: Boost License
+Des:
<!-- DT:Rich -->
<p>This package contains the license boost is provided under.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash 3.3 146.24.12 x86_64
=Sum: Stavové animace použité při startu systému - utility
+Des:
<!-- DT:Rich -->
<p>Balík přidává skripty a animace zobrazované při zavádění systému.
Současně musíte mít nainstalované téma zavaděče.
Více informací viz: http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-branding-SLED 3.1 47.22 x86_64
=Sum: Výchozí téma zavaděče NLD
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje výchozí téma pro grafický start NLD.
Více viz http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: brasero 2.28.3 0.3.4 x86_64
=Sum: CD/DVD burning application for GNOME
+Des:
<!-- DT:Rich -->
<p>Brasero is an application to burn CD/DVDs for the GNOME Desktop.
It is designed to be as simple as possible and has some unique
features to enable users to create their discs easily and quickly.
</p><p>
It supports creating audio discs, data discs, burning ISO and
other image files, and duplicating discs.
</p>
-Des:
##----------------------------------------
=Pkg: brasero-lang 2.28.3 0.3.4 x86_64
=Sum: CD/DVD burning application for GNOME
+Des:
<!-- DT:Rich -->
<p>Brasero is an application to burn CD/DVDs for the GNOME Desktop.
It is designed to be as simple as possible and has some unique
features to enable users to create their discs easily and quickly.
</p><p>
It supports creating audio discs, data discs, burning ISO and
other image files, and duplicating discs.
</p>
-Des:
##----------------------------------------
=Pkg: bridge-utils 1.4 23.16 x86_64
=Sum: Nástroje pro konfiguraci Linux Ethernet Bridge
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje nástroje pro konfiguraci linuxového ethernetového
můstku. Ten lze používat k propojování více ethernetových zařízení
dohromady. Spojení je plně transparentní: počítače připojené k jednomu
ethernetovému zařízení vidí počítače připojené k dalším ethernetovým
zařízením přímo.
</p><p>
Autoři:
<hr>
Lennert Buytenhek &lt;buytenh@gnu.org&gt;
</p>
-Des:
##----------------------------------------
=Pkg: btrfsprogs 0.19 5.23.2 x86_64
=Sum: Utilities for the Second Btr File System
+Des:
<!-- DT:Rich -->
<p>Utilities needed to create and maintain btrfs file systems under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: bug-buddy 2.28.0 1.2.22 x86_64
=Sum: Nástroj pro nahlašování chyb v GNOME
+Des:
<!-- DT:Rich -->
<p>The Bug Buddy for the GNOME 2.x Desktop makes bug reporting for end-users as easy as possible. It can generate crash backtraces and include that information into the bug report.
</p>
-Des:
##----------------------------------------
=Pkg: bug-buddy-lang 2.28.0 1.2.22 x86_64
=Sum: Nástroj pro nahlašování chyb v GNOME
+Des:
<!-- DT:Rich -->
<p>The Bug Buddy for the GNOME 2.x Desktop makes bug reporting for end-users as easy as possible. It can generate crash backtraces and include that information into the bug report.
</p>
-Des:
##----------------------------------------
=Pkg: busybox 1.12.1 1.21 x86_64
=Sum: Zmenšené verze mnoha unixových příkazů
+Des:
<!-- DT:Rich -->
<p>BusyBox kombinuje malé verze mnoha známých UNIXových utilit
do jedné malé binárky. Nabízí pak minimalistickou náhradu za většinu
programů z fileutils, shellutils, findutils, textutils, grep, gzip, tar atd.
BusyBox vytváří téměř kompletní prostředí POSIX pro malé nebo zeštíhlené
systémy. Utility v BusyBox mají obvykle méně parametrů než jejich plně
vybavení GNU bratranci, ale obsahují očekávané funkce a chovají se skoro
jako jejich GNU verze.
</p>
-Des:
##----------------------------------------
=Pkg: bytefx-data-mysql 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: bzip2 1.0.5 34.253.1 x86_64
=Sum: Program pro komprimaci souborů
+Des:
<!-- DT:Rich -->
<p>The bzip2 program is a very powerful program for compressing files.
</p>
-Des:
##----------------------------------------
=Pkg: cabextract 1.2 2.8 x86_64
=Sum: Program pro rozbalování archívů Microsoft Cabinet
+Des:
<!-- DT:Rich -->
<p>Cabinet (.CAB) soubory jsou druhem archívů, které Microsoft používá při
distribuci svého softwaru anebo třeba Windows Font Packs.
Cabextract lze použít k rozbalení těchto souborů. 
</p>
-Des:
##----------------------------------------
=Pkg: cairo 1.8.8 2.1.48 x86_64
=Sum: Vektorová grafická knihovna s podporou výstupu na různá zařízení
+Des:
<!-- DT:Rich -->
<p>Cairo je knihovna pro vektorovou graficku v podporou výstupu na křížová zařízení. Momentálně podporuje různé cíle včetně X Window, obrázkové buffery a PostScriptu. Cairo je navržena tak, aby odesílala identický výstup na všechna výstupní média a využívala případné dostupnosti hardwarové akcelerace.
</p>
-Des:
##----------------------------------------
=Pkg: cairo-32bit 1.8.8 2.1.48 x86_64
=Sum: Vektorová grafická knihovna s podporou výstupu na různá zařízení
+Des:
<!-- DT:Rich -->
<p>Cairo je knihovna pro vektorovou graficku v podporou výstupu na křížová zařízení. Momentálně podporuje různé cíle včetně X Window, obrázkové buffery a PostScriptu. Cairo je navržena tak, aby odesílala identický výstup na všechna výstupní média a využívala případné dostupnosti hardwarové akcelerace.
</p>
-Des:
##----------------------------------------
=Pkg: cairo-devel 1.8.8 2.1.48 x86_64
=Sum: Vývojové prostředí pro cairo
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje vše potřebné pro vytváření spustitelných souborů pomocí cairo.
</p>
-Des:
##----------------------------------------
=Pkg: cairomm 1.6.4 2.7 x86_64
=Sum: C++ Interface for Cairo
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for Cairo.
</p>
-Des:
##----------------------------------------
=Pkg: canna 3.7p3 201.18 x86_64
=Sum: Kana a Kanji konverzní systém
+Des:
<!-- DT:Rich -->
<p>Canna konvertuje písmo kana do kanji. Využívá model klient-server, tzn.
že aplikační program komunikuje se serverem, který provádí vlastní
konverzi a tak umožňuje vstup v japonštině. Canna lze používat v Emacsu,
v X, i na terminálových obrazovkách. Canna poskytuje více než deset
nástrojů pro správu konverzních slovníků z kana do kanji.
</p>
-Des:
##----------------------------------------
=Pkg: canna-libs 3.7p3 201.18 x86_64
=Sum: Knihovny pro Canna
+Des:
<!-- DT:Rich -->
<p>Knihovny pro Canna
</p>
-Des:
##----------------------------------------
=Pkg: cannadic 0.95a 2.10 x86_64
=Sum: Rozšířený přídavný slovník pro Canna
+Des:
<!-- DT:Rich -->
<p>Tento slovník byl vytvořen jako doplněk slovníků distribuovaných
spolu s Canna3.5b2. Je založen na Kana-Kanji konverzních slovnících 
distribuovaných pod GPL a Kana-Kanji distribuované bez omezení.
Bylo přidáno mnoho chybějících slov. V současnosti má hlavní slovník
spolu se slovníkem předpona  přípon okolo 130000 slov.
</p>
-Des:
##----------------------------------------
=Pkg: capi4linux 2011.11.3 0.2.2.1 x86_64
=Sum: Knihovna CAPI 2.0 a z ní odvozené nástroje
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje potřebné knihovny pro všechny programy z CAPI 2.0 a některé další programy pro
odesílání a přijímání faxů. Je vyžadováno ISDN zařízení s ovladačem CAPI 2.0, což podporuje stále
více ISDN zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: capi4linux-32bit 2011.11.3 0.2.2.1 x86_64
=Sum: Knihovna CAPI 2.0 a z ní odvozené nástroje
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje potřebné knihovny pro všechny programy z CAPI 2.0 a některé další programy pro
odesílání a přijímání faxů. Je vyžadováno ISDN zařízení s ovladačem CAPI 2.0, což podporuje stále
více ISDN zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: ccache 2.4 6.8 x86_64
=Sum: Kompilační cache
+Des:
<!-- DT:Rich -->
<p>Ccache je cache pro kompilaci. Chová se jako cache preprocesor pro 
C/C++ překladače, používá E překladač a hash ke zjišťování, zda
lze použít cache. Použití obvykle výrazně urychlí většinu běžných překladů.
</p>
-Des:
##----------------------------------------
=Pkg: cdk 4.9.13 44.8 x86_64
=Sum: Běhová část Curses Development Kitu
+Des:
<!-- DT:Rich -->
<p>CDK je set widgetů vytvořený nad záklandní knihovnou curses.
Obsahuje 21 předpřipravených widgetů. Některé obsahují textová
pole, rolovací lišty, výběrové lišty, alfanumerické seznamy,
rozbalovací menu, zaškrtávací boxy a mnoho dalšího.
</p>
-Des:
##----------------------------------------
=Pkg: cdparanoia 3.10.2 2.1.42 x86_64
=Sum: Program pro získání, kontrolu a opravu hudebních stop z CD
+Des:
<!-- DT:Rich -->
<p>&#39;cdparanoia&#39; načítá digitální audio přímo z CD, bez analogového mezikroku,
a zapisuje je do souboru nebo roury jako .wav, .aifc nebo jako syrový
16 bitový lineární PCM.
</p><p>
Beta verze, viz http://www.xiph.org/paranoia/
</p>
-Des:
##----------------------------------------
=Pkg: cdrdao 1.2.2 248.31 x86_64
=Sum: Program pro zápis CD-R v režimu disk-at-once (DAO)
+Des:
<!-- DT:Rich -->
<p>cdrdao vytváří CD-R v režimu disk-at-once (DAO) řízeném popisným souborem
nazývaným toc-file. V DAO režimu je možné například vytvořit nestandardní
pauzy před stopami, které mohou mít jiné délky než 2 sekundy a obsahují
nenulová audio data. To je užitečné při rozdělování živých nahrávek do stop, kde
by dvousekundová pauza byla rušivá.
</p>
-Des:
##----------------------------------------
=Pkg: cdrkit-cdrtools-compat 1.1.8 3.32.3 x86_64
=Sum: Tool for Writing CDRs - cdrtools compatibility package
+Des:
<!-- DT:Rich -->
<p>This package contains these compatibility symlinks:
cdrecord -&gt; wodim
mkisofs -&gt; genisoimage
cdda2wav -&gt; icedax
</p><p>
Install this package if you can&#39;t use the cdrkit programs directly.
</p>
-Des:
##----------------------------------------
=Pkg: cellwriter 1.3.4 1.26 x86_64
=Sum: Character-based handwriting input panel
+Des:
<!-- DT:Rich -->
<p>CellWriter is a grid-entry natural handwriting input panel. As you write
characters into the cells, your writing is instantly recognized at the
character level. When you press Enter on the panel, the input you entered is
sent to the currently focused application as if typed on the keyboard.
</p>
-Des:
##----------------------------------------
=Pkg: celt 0.11.1 3.5.18 x86_64
=Sum: Ultra-Low Delay Audio Codec
+Des:
<!-- DT:Rich -->
<p>The CELT codec is an experimental audio codec for use in low-delay
speech and audio communication.
</p>
-Des:
##----------------------------------------
=Pkg: cft 0.2.2 0.11.2 x86_64
=Sum: Configuration File Tracker
+Des:
<!-- DT:Rich -->
<p>Cft (pronounced &#39;sift&#39;) follows a sysadmin as she makes changes to the
system, records the changes and produces a puppet manifest from them.  Its
basic workings are inspired by Gnome&#39;s Sabayon, a tool that watches a user
make configuration changes to their desktop and collects them into a
reusable bundle. Instead of the desktop though, cft is focused on
traditional system admins and how they maintain machines, mostly with
command line tools. Cft uses puppet as its backbone for expressing the
configuration of a system, and for understanding in greater detail what
changes the admin has made to the system.
</p>
-Des:
##----------------------------------------
=Pkg: check 0.9.5 63.21 x86_64
=Sum: Unit Test Framework for C
+Des:
<!-- DT:Rich -->
<p>Check is a unit test framework for C. It features a simple interfacefor defining unit tests, limitating the developer the less possible. Tests are run in a separate address space, so Check cancatch both, assertion failures and code errors that cause segmentationfaults or other signals. The output of unit tests can be used within source code editors and IDEs.
</p>
-Des:
##----------------------------------------
=Pkg: check-32bit 0.9.5 63.21 x86_64
=Sum: Unit Test Framework for C
+Des:
<!-- DT:Rich -->
<p>Check is a unit test framework for C. It features a simple interfacefor defining unit tests, limitating the developer the less possible. Tests are run in a separate address space, so Check cancatch both, assertion failures and code errors that cause segmentationfaults or other signals. The output of unit tests can be used within source code editors and IDEs.
</p>
-Des:
##----------------------------------------
=Pkg: checkmedia 2.2 1.22 x86_64
=Sum: Kontrola instalačních médií
+Des:
<!-- DT:Rich -->
<p>Kontroluje chyby na instalačních CD a DVD.
</p>
-Des:
##----------------------------------------
=Pkg: cheese 2.28.1 2.10.1 x86_64
=Sum: Cheese is a Photobooth-inspired application for taking pictures and videos
+Des:
<!-- DT:Rich -->
<p>Cheese is a Photobooth-inspired GNOME application for taking pictures and
videos from a webcam. It also includes fancy graphical effects based on the
gstreamer-backend.
</p>
-Des:
##----------------------------------------
=Pkg: cheese-lang 2.28.1 2.10.1 x86_64
=Sum: Cheese is a Photobooth-inspired application for taking pictures and videos
+Des:
<!-- DT:Rich -->
<p>Cheese is a Photobooth-inspired GNOME application for taking pictures and
videos from a webcam. It also includes fancy graphical effects based on the
gstreamer-backend.
</p>
-Des:
##----------------------------------------
=Pkg: chmlib 0.39 101.22 x86_64
=Sum: A library for dealing with ITSS/CHM files
+Des:
<!-- DT:Rich -->
<p>CHMLIB is a library for dealing with Microsoft ITSS/CHM format files.
</p>
-Des:
##----------------------------------------
=Pkg: chmsee 1.1.0 3.7.3 x86_64
=Sum: A Gtk+2 CHM document viewer
+Des:
<!-- DT:Rich -->
<p>It uses chmlib to extract files. It uses gecko to display pages. It supports
displaying multilingual pages due to gecko. It features bookmarks and tabs.
The tabs could be used to jump inside the chm file conveniently. Its UI is
clean and handy, also is well localized. It is actively developed and
maintained. The author of chmsee is Jungle Ji and several other great people.
</p>
-Des:
##----------------------------------------
=Pkg: cifs-utils 5.1 0.4.9 x86_64
=Sum: A package of utilities for doing and managing mounts of the Linux CIFS filesystem.
+Des:
<!-- DT:Rich -->
<p>These programs
were originally part of Samba, but have now been split off into a
separate package.
<ol>
<li>PROJECT RESOURCES
</li></ol>
Home page: http://linux-cifs.samba.org/cifs-utils/
Mailing list: linux-cifs-client@lists.samba.org
Maintainer: cifs-utils@samba.org
Git Repository: git://git.samba.org/cifs-utils.git
<ol>
<li>COMPILING
</li></ol>
If you pulled down the git tree directly, then you&#39;ll need to
generate the autoconf/automake files before you can build. cd to
the top of the build tree and run:
</p><p>
$ autoreconf -i
</p><p>
If you downloaded a release tarball, then just unpack the sources
and run these commands:
</p><p>
$ ./configure
$ make
</p><p>
To install binaries and documentation, run this:
<ol>
<li>make install
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: ckermit 8.0.211 95.16.1 x86_64
=Sum: Kombinovaný program pro komunikaci přes sériové linky i síť
+Des:
<!-- DT:Rich -->
<p>C-Kermit je kombinovaný program umožňující komunikaci přes sériové
linky i síť. Poskytuje konzistentní přístup pro navazování spojení,
terminálový přístup a přenos souborů, nezávislý na přenosovém
médiu i platformě, s možností změny kódování znaků a automatizace
komunikačních úloh.
</p>
-Des:
##----------------------------------------
=Pkg: clamav 0.97.3 0.2.1 x86_64
=Sum: Antivirový toolkit
+Des:
<!-- DT:Rich -->
<p>Clam AntiVirus je antivirový toolkit pro UNIX.
Hlavním smyslem tohoto programu je integrace s poštovními servery a skenování příloh. Balík obsahuje flexibilní a škálovatelný vícevláknový démon, skener pro příkazovou řádku a nástroj pro automatickou aktualizaci přes Internet. Lze používat spolu s AMaViSD-new a Postfix a získat tak kombinovaný filtr spamu a virů v elektronické poště.
</p>
-Des:
##----------------------------------------
=Pkg: clucene-core 0.9.21 1.15 x86_64
=Sum: CLucene is a C++ port of Lucene
+Des:
<!-- DT:Rich -->
<p>CLucene is a C++ port of Lucene.
It is a high-performance, full-featured text search engine written in C++.
CLucene is faster than lucene as it is written in C++.
</p>
-Des:
##----------------------------------------
=Pkg: clucene-core-32bit 0.9.21 1.15 x86_64
=Sum: CLucene is a C++ port of Lucene
+Des:
<!-- DT:Rich -->
<p>CLucene is a C++ port of Lucene.
It is a high-performance, full-featured text search engine written in C++.
CLucene is faster than lucene as it is written in C++.
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-bindings-pywbem 0.4.0 6.1.78 x86_64
=Sum: Adapter to write and run CMPI-type CIM providers in Python
+Des:
<!-- DT:Rich -->
<p>This allows to write and run CMPI-type CIM providers in Python
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-pywbem-software 0.1.2 3.20.71 x86_64
=Sum: CIM provider for packagekit
+Des:
<!-- DT:Rich -->
<p>This is a tech preview for a CIM instrumentation for the software profiles based on PackageKit.
</p>
-Des:
##----------------------------------------
=Pkg: command-not-found 0.1.0 29.9.29 x86_64
=Sum: Command Not Found extension for shell
+Des:
<!-- DT:Rich -->
<p>The &quot;command not found&quot; message is not very helpful. If e.g. the unzip command is not found but it&#39;s available in a package, it would be very interesting if the system could tell that the command is currently not available, but installing a package would provide it.
</p>
-Des:
##----------------------------------------
=Pkg: compat-32bit 2009.1.19 1.8 x86_64
=Sum: Knihovny pro zajištění kompatibility
+Des:
<!-- DT:Rich -->
<p>Contains old libraries possibly needed for programs not part of SUSE.
</p>
-Des:
##----------------------------------------
=Pkg: compat-openssl097g 0.9.7g 146.20.1 x86_64
=Sum: Secure Sockets a Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>Projekt OpenSSL je společný pokus o vytvoření robustního,
plnohodnotného, komerčně a celosvětově použitelného Open Source
toolkitu implementujícího protokoly Secure Sockets Layer (SSL
v2/v3) a Transport Layer Security (TLS v1) se silným šifrováním.
Projekt je řízen celosvětovou komunitou dobrovolníků, kteří
používají Internet pro komunikaci, plánování a vývoj toolkitu
OpenSSL včetně jeho dokumentace.
</p><p>
Zdroje a licence
</p><p>
OpenSSL je založeno na excelentní knihovně SSLeay, jejímiž autory
jsou Eric A. Young a Tim J. Hudson. Licence toolkitu OpenSSL je ve
stylu licence serveru Apache, což znamená, že jej lze volně
používat pro nekomerční i komerční účely.
</p>
-Des:
##----------------------------------------
=Pkg: compat-openssl097g-32bit 0.9.7g 146.20.1 x86_64
=Sum: Secure Sockets a Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>Projekt OpenSSL je společný pokus o vytvoření robustního,
plnohodnotného, komerčně a celosvětově použitelného Open Source
toolkitu implementujícího protokoly Secure Sockets Layer (SSL
v2/v3) a Transport Layer Security (TLS v1) se silným šifrováním.
Projekt je řízen celosvětovou komunitou dobrovolníků, kteří
používají Internet pro komunikaci, plánování a vývoj toolkitu
OpenSSL včetně jeho dokumentace.
</p><p>
Zdroje a licence
</p><p>
OpenSSL je založeno na excelentní knihovně SSLeay, jejímiž autory
jsou Eric A. Young a Tim J. Hudson. Licence toolkitu OpenSSL je ve
stylu licence serveru Apache, což znamená, že jej lze volně
používat pro nekomerční i komerční účely.
</p>
-Des:
##----------------------------------------
=Pkg: compiz 0.7.8 32.49.1 x86_64
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-branding-SLE 0.7.8 32.49.1 x86_64
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-fusion-plugins-extra 0.7.8 3.37 x86_64
=Sum: Compiz-Fusion community extra plugins
+Des:
<!-- DT:Rich -->
<p>This package contains Compiz-Fusion community extra plugins.
</p><p>
Contains: addhelper crashhandler extrawm firepaint goto-viewport mswitch scalefilter splash bench cubereflex fadedesktop gears group mblur reflex showdesktop trailfocus.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-fusion-plugins-main 0.7.8 10.14.2 x86_64
=Sum: Compiz-Fusion community main plugins
+Des:
<!-- DT:Rich -->
<p>This package contains Compiz-Fusion community main plugins.
</p><p>
Contains: animation expo ezoom jpeg neg opacify put resizeinfo ring scaleaddon snap text thumbnail vpswitch wall winrules workarounds.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-gnome 0.7.8 32.49.1 x86_64
=Sum: OpenGL window and compositing manager configuration utilities
+Des:
<!-- DT:Rich -->
<p>This package contains Gnome based configuration utilities for the Compiz compositing manager.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-plugins-dmx 0.1.0 8.38.1 x86_64
=Sum: Compiz DMX plugins
+Des:
<!-- DT:Rich -->
<p>This package contains compiz DMX plugins.
</p>
-Des:
##----------------------------------------
=Pkg: compizconfig-settings-manager 0.7.8 3.21 x86_64
=Sum: Settings Manager for Compiz (CCSM)
+Des:
<!-- DT:Rich -->
<p>Compiz Config and Settings tool (CCSM).
</p>
-Des:
##----------------------------------------
=Pkg: computertemp 0.9.6.1 2.28 x86_64
=Sum: Computer Temperature Monitor is a little applet for the GNOME desktop that shows the temperature of your computer CPU and disks on screen.
+Des:
<!-- DT:Rich -->
<p>Computer Temperature Monitor is a little applet for the GNOME desktop
that shows the temperature of your computer CPU and disks on screen.
</p><p>
It also allows you to log temperatures to a file.
You can set alarms to notify you when a tempertature is reached.
Several monitors can be added to the panel to monitor different sensors.
</p>
-Des:
##----------------------------------------
=Pkg: computertemp-lang 0.9.6.1 2.28 x86_64
=Sum: Computer Temperature Monitor is a little applet for the GNOME desktop that shows the temperature of your computer CPU and disks on screen.
+Des:
<!-- DT:Rich -->
<p>Computer Temperature Monitor is a little applet for the GNOME desktop
that shows the temperature of your computer CPU and disks on screen.
</p><p>
It also allows you to log temperatures to a file.
You can set alarms to notify you when a tempertature is reached.
Several monitors can be added to the panel to monitor different sensors.
</p>
-Des:
##----------------------------------------
=Pkg: conduit 0.3.15 4.32.25 x86_64
=Sum: A synchronization application for GNOME
+Des:
<!-- DT:Rich -->
<p>Conduit is a synchronization application for GNOME. It allows you to
synchronize your data between online web services (Gmail,
backpackit.com, etc) and your computer.
</p>
-Des:
##----------------------------------------
=Pkg: conduit-lang 0.3.15 4.32.25 x86_64
=Sum: A synchronization application for GNOME
+Des:
<!-- DT:Rich -->
<p>Conduit is a synchronization application for GNOME. It allows you to
synchronize your data between online web services (Gmail,
backpackit.com, etc) and your computer.
</p>
-Des:
##----------------------------------------
=Pkg: conglomerate 0.9.1 281.33 x86_64
=Sum: XML editor pro GNOME
+Des:
<!-- DT:Rich -->
<p>Conglomerate je uživatelsky přívětivý XML editor pro DocBook a další styly. Byl navržen tak, aby skryl složitý a nesrozumitelný XML zdroj za příjemné grafické rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: conglomerate-lang 0.9.1 281.33 x86_64
=Sum: XML editor pro GNOME
+Des:
<!-- DT:Rich -->
<p>Conglomerate je uživatelsky přívětivý XML editor pro DocBook a další styly. Byl navržen tak, aby skryl složitý a nesrozumitelný XML zdroj za příjemné grafické rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: contact-lookup-applet 0.16 1.44.69 x86_64
=Sum: Vyhledávací applet pro knihu adres Evolution.
+Des:
<!-- DT:Rich -->
<p>Applet umožňující vyhledávat kontakty v adresáři programu Evolution 2.
</p><p>
jednoduše jej umístěte do panelu a do políčka napište hledané jméno.
</p>
-Des:
##----------------------------------------
=Pkg: contact-lookup-applet-lang 0.16 1.44.69 x86_64
=Sum: Vyhledávací applet pro knihu adres Evolution.
+Des:
<!-- DT:Rich -->
<p>Applet umožňující vyhledávat kontakty v adresáři programu Evolution 2.
</p><p>
jednoduše jej umístěte do panelu a do políčka napište hledané jméno.
</p>
-Des:
##----------------------------------------
=Pkg: coreutils 8.12 6.19.1 x86_64
=Sum: Základní GNU nástroje
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správu vašeho systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Basic file, shell, and text manipulation utilities.  The package contains the following programs:
</p><p>
[ arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false fmt fold groups head id install join kill link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon seq sha1sum sha224sum sha256sum sha384sum sha512sum shred shuf sleep sort split stat stty su sum sync tac tail tee test touch tr true tsort tty uname unexpand uniq unlink uptime users vdir wc who whoami yes
</p>
-Des:
##----------------------------------------
=Pkg: coreutils-lang 8.12 6.19.1 x86_64
=Sum: Základní GNU nástroje
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správu vašeho systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Basic file, shell, and text manipulation utilities.  The package contains the following programs:
</p><p>
[ arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false fmt fold groups head id install join kill link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon seq sha1sum sha224sum sha256sum sha384sum sha512sum shred shuf sleep sort split stat stty su sum sync tac tail tee test touch tr true tsort tty uname unexpand uniq unlink uptime users vdir wc who whoami yes
</p>
-Des:
##----------------------------------------
=Pkg: cpio 2.9 75.76.1 x86_64
=Sum: Zálohovací a archivační program
+Des:
<!-- DT:Rich -->
<p>GNU cpio is a program to manage archives of files. This package also includes &#39;mt&#39;, a tape drive control program. Cpio copies files into or out of a cpio or tar archive. An archive is a file that contains other
files plus information about them, such as their pathname, owner, time stamps, and access permissions.
The archive can be another file on the disk, a magnetic tape, or a pipe.
This package normally includes the program &#39;rmt&#39;, which providesremote tape drive control. Because there is a compatible &#39;rmt&#39; in the&#39;dump&#39; package, &#39;rmt&#39; is not included in this package. If you are planningto use the remote tape features provided by cpio, install the&#39;dump&#39; package as well.
</p>
-Des:
##----------------------------------------
=Pkg: cpio-lang 2.9 75.76.1 x86_64
=Sum: Zálohovací a archivační program
+Des:
<!-- DT:Rich -->
<p>GNU cpio is a program to manage archives of files. This package also includes &#39;mt&#39;, a tape drive control program. Cpio copies files into or out of a cpio or tar archive. An archive is a file that contains other
files plus information about them, such as their pathname, owner, time stamps, and access permissions.
The archive can be another file on the disk, a magnetic tape, or a pipe.
This package normally includes the program &#39;rmt&#39;, which providesremote tape drive control. Because there is a compatible &#39;rmt&#39; in the&#39;dump&#39; package, &#39;rmt&#39; is not included in this package. If you are planningto use the remote tape features provided by cpio, install the&#39;dump&#39; package as well.
</p>
-Des:
##----------------------------------------
=Pkg: cpp 4.3 62.198 x86_64
=Sum: The system GNU Preprocessor
+Des:
<!-- DT:Rich -->
<p>The system GNU Preprocessor.
</p>
-Des:
##----------------------------------------
=Pkg: cpp43 4.3.4_20091019 0.22.17 x86_64
=Sum: GCC preprocesor
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje samostatný preprocesor používaný balíčky X11.
</p>
-Des:
##----------------------------------------
=Pkg: cpufrequtils 004 35.20 x86_64
=Sum: Nástroje pro určení a nastavení CPUfreq
+Des:
<!-- DT:Rich -->
<p>Balíček cpufrequtils byl vytvořen pro usnadnění přístupu k jadernému subsystému cpufreq. Obsahuje knihovnu používanou dalšími programy (libcpufreq), nástroje pro příkazovou řádku pro zjištění současného nastavení CPUfreq a jejich změnu (cpufreq-info a cpufreq-set) a ladící nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: cpufrequtils-32bit 004 35.20 x86_64
=Sum: Nástroje pro určení a nastavení CPUfreq
+Des:
<!-- DT:Rich -->
<p>Balíček cpufrequtils byl vytvořen pro usnadnění přístupu k jadernému subsystému cpufreq. Obsahuje knihovnu používanou dalšími programy (libcpufreq), nástroje pro příkazovou řádku pro zjištění současného nastavení CPUfreq a jejich změnu (cpufreq-info a cpufreq-set) a ladící nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: cpupower 2.6.39 2.10.1 x86_64
=Sum: Nástroje pro určení a nastavení CPUfreq
+Des:
<!-- DT:Rich -->
<p>Balíček cpufrequtils byl vytvořen pro usnadnění přístupu k jadernému subsystému cpufreq. Obsahuje knihovnu používanou dalšími programy (libcpufreq), nástroje pro příkazovou řádku pro zjištění současného nastavení CPUfreq a jejich změnu (cpufreq-info a cpufreq-set) a ladící nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib 2.8.12 56.9.9 x86_64
=Sum: Full Dictionary for cracklib
+Des:
<!-- DT:Rich -->
<p>CrackLib tests passwords to determine whether they match certainsecurity-oriented characteristics. You can use CrackLib to stopusers from choosing passwords that are too simple.This package contains a full dictionary file used by cracklib.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib-32bit 2.8.12 56.9.9 x86_64
=Sum: Full Dictionary for cracklib
+Des:
<!-- DT:Rich -->
<p>CrackLib tests passwords to determine whether they match certainsecurity-oriented characteristics. You can use CrackLib to stopusers from choosing passwords that are too simple.This package contains a full dictionary file used by cracklib.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib-dict-full 2.8.12 43.16 x86_64
=Sum: Knihovna pro kontrolu hesel
+Des:
<!-- DT:Rich -->
<p>CrackLib testuje hesla, zdali vyhovují jistým bezpečnostním požadavkům.
CrackLib můžete používat, abyste zabránili uživatelům v používání snadno
uhodnutelných hesel.
</p>
-Des:
##----------------------------------------
=Pkg: crda 1.1.1 8.5.106 x86_64
=Sum: 802.11 central regulatory domain agent
+Des:
<!-- DT:Rich -->
<p>The crda binary provides access to the wireless-regdb to the kernel through udev.
</p>
-Des:
##----------------------------------------
=Pkg: cron 4.1 194.199.1 x86_64
=Sum: Cron Daemon
+Des:
<!-- DT:Rich -->
<p>cron automaticky v zadanou dobu startuje požadované programy. Seznam úloh
lze upravit textovým editorem po zadání příkazu &quot;crontab -e&quot;.
(Popis použití najdete v &quot;man 5 crontab&quot; a &quot;man 1 crontab&quot;.)
</p><p>
Kromě takto zadaných úloh naleznete v adresáři /etc adresáře
cron.hourly, cron.daily, cron.weekly a cron.monthly, do kterých
lze umístit skripty, které se budou automaticky startovat
každou hodinu, den, týden nebo měsíc.
</p>
-Des:
##----------------------------------------
=Pkg: cryptconfig 0.3 68.8.17 x86_64
=Sum: A Utility to Configure Encrypted Home Directories and LUKS Partitions
+Des:
<!-- DT:Rich -->
<p>This package contains a utility for configuring encrypted home directories and
LUKS partitions. It also supports creating LUKS disk images, creating
LUKS partitions, and enlarging disk images along with their file systems.  This
package also contains a pam module that syncs a user&#39;s UNIX password with
the password used to encrypt their home directory.
</p>
-Des:
##----------------------------------------
=Pkg: cryptconfig-32bit 0.3 68.8.17 x86_64
=Sum: A Utility to Configure Encrypted Home Directories and LUKS Partitions
+Des:
<!-- DT:Rich -->
<p>This package contains a utility for configuring encrypted home directories and
LUKS partitions. It also supports creating LUKS disk images, creating
LUKS partitions, and enlarging disk images along with their file systems.  This
package also contains a pam module that syncs a user&#39;s UNIX password with
the password used to encrypt their home directory.
</p>
-Des:
##----------------------------------------
=Pkg: cryptsetup 1.0.5_SVNr46 58.37.3 x86_64
=Sum: Set Up dm-crypt Based Encrypted Block Devices
+Des:
<!-- DT:Rich -->
<p>cryptsetup is used to conveniently set up dm-crypt based device-mapper targets. It allows to set up targets to read cryptoloop compatible volumes as well as LUKS formatted ones. The package additionally includes support for automatically setting up encrypted volumes at boot time via the config file /etc/crypttab.
</p>
-Des:
##----------------------------------------
=Pkg: csync 0.41.98 1.21 x86_64
=Sum: A user level bidirectional client only file synchronizer
+Des:
<!-- DT:Rich -->
<p>csync is an implementation of a file synchronizer which provides the feature of roaming home directories for Linux clients. csync makes use of libsmbclient in Samba/Windows environments.
</p>
-Des:
##----------------------------------------
=Pkg: ctags 2008.9.5 1.21 x86_64
=Sum: Generátor indexových souborů pro použití v textových editorech Vi a dalších.
+Des:
<!-- DT:Rich -->
<p>CTags (from Darren Hiebert) generates tag files from source code in C, C++, Eiffel, Fortran, and Java to be used with vi and its derivatives, Emacs, and several other editors.
</p><p>
ETags (from GNU Emacs sources) generates tag files from source code in Pascal, Cobol, Ada, Perl, LaTeX, Scheme, Emacs Lisp/Common Lisp, Postscript, Erlang, Python, Prolog, and most assembler-like syntaxes.
</p>
-Des:
##----------------------------------------
=Pkg: ctapi-cyberjack 3.3.0 3.25 x86_64
=Sum: CT-API and tools for Reiner SCT Cyberjack USB-SmartCard Reader
+Des:
<!-- DT:Rich -->
<p>REINER SCT Cyberjack pinpad/e-com USB user space driver. This package includes
the CT-API driver for the Cyberjack pinpad/e-com USB chipcard reader and some tools as a simple CT shell around it.
</p><p>
For more information about the reader, software updates, and more see:
</p><p>
http://www.reiner-sct.de/db/reiner-sct.de/html/e-com.html
http://www.reiner-sct.de/db/reiner-sct.de/html/pinpad.html
</p>
-Des:
##----------------------------------------
=Pkg: ctapi-cyberjack-32bit 3.3.0 3.25 x86_64
=Sum: CT-API and tools for Reiner SCT Cyberjack USB-SmartCard Reader
+Des:
<!-- DT:Rich -->
<p>REINER SCT Cyberjack pinpad/e-com USB user space driver. This package includes
the CT-API driver for the Cyberjack pinpad/e-com USB chipcard reader and some tools as a simple CT shell around it.
</p><p>
For more information about the reader, software updates, and more see:
</p><p>
http://www.reiner-sct.de/db/reiner-sct.de/html/e-com.html
http://www.reiner-sct.de/db/reiner-sct.de/html/pinpad.html
</p>
-Des:
##----------------------------------------
=Pkg: cups 1.3.9 8.44.1 x86_64
=Sum: Tiskový systém Common Unix Printing System
+Des:
<!-- DT:Rich -->
<p>Common Unix Printing System poskytuje přenositelnou tiskovou vrstvu
pro unixové operační systémy. Toto je vývojový balíček pro vytváření
dalších ovladačů tiskáren a dalších CUPS služeb.
</p><p>
http://www.cups.org
</p>
-Des:
##----------------------------------------
=Pkg: cups-autoconfig 0.1.0 158.28.73 x86_64
=Sum: A Utility to Auto-configure Printers
+Des:
<!-- DT:Rich -->
<p>This package contains a utility for auto-configuring printers.
</p>
-Des:
##----------------------------------------
=Pkg: cups-backends 1.0 103.28.119 x86_64
=Sum: Různé svobodné backendy pro balík CUPS
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje další backendy pro CUPS.
</p>
-Des:
##----------------------------------------
=Pkg: cups-client 1.3.9 8.44.1 x86_64
=Sum: Klientské programy CUPS
+Des:
<!-- DT:Rich -->
<p>CUPS (Common UNIX Printing System) nabízí přenosnou tiskovou vrstvu
pro operační systémy typu UNIX, jako lp a lprng z BSD.
Balík obsahuje veškeré programy nutné pro provozování klienta - ne serveru.
</p>
-Des:
##----------------------------------------
=Pkg: cups-drivers 1.3.9 2.31 x86_64
=Sum: Ovladače pro CUPS (Common UNIX Printing System)
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje databázi ovladačů tiskáren pro CUPS.
Data pochází z databáze www.linuxprinting.org.
</p>
-Des:
##----------------------------------------
=Pkg: cups-libs 1.3.9 8.44.1 x86_64
=Sum: Libraries for CUPS
+Des:
<!-- DT:Rich -->
<p>Common UNIX Printing System (CUPS) poskytuje přenositelnou tiskovou vrstvu
pro UNIXové operační systémy jako lp nebo lprng z BSD. CUPS má však mnoho
 přidaných vlastností. 
Balíček obsahuje knihovny potřebné pro CUPS a některé jiné balíčky.
</p>
-Des:
##----------------------------------------
=Pkg: cups-libs-32bit 1.3.9 8.44.1 x86_64
=Sum: Libraries for CUPS
+Des:
<!-- DT:Rich -->
<p>Common UNIX Printing System (CUPS) poskytuje přenositelnou tiskovou vrstvu
pro UNIXové operační systémy jako lp nebo lprng z BSD. CUPS má však mnoho
 přidaných vlastností. 
Balíček obsahuje knihovny potřebné pro CUPS a některé jiné balíčky.
</p>
-Des:
##----------------------------------------
=Pkg: curl 7.19.7 1.18.1 x86_64
=Sum: Nástroj pro získávání dat z URL
+Des:
<!-- DT:Rich -->
<p>Curl is a client to get documents and files from or send documents
to a server using any of the supported protocols
(HTTP, HTTPS, FTP, FTPS, TFTP, DICT, TELNET, LDAP, or FILE).
The command is designed to work without user interaction
or any kind of interactivity.
</p>
-Des:
##----------------------------------------
=Pkg: cvs 1.12.12 144.21 x86_64
=Sum: CVS - Systém pro správu verzí
+Des:
<!-- DT:Rich -->
<p>CVS is a front-end to the <a href="pkg://rcs"> Revision Control System</a>
included in the standard Linux distributions.
PCL-CVS, an <a href="pkg://emacs"> Emacs</a> front-end for CVS, is also included.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl 2.1.22 182.20.1 x86_64
=Sum: Implementace Cyrus SASL API
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Lze ji použít na klientské
nebo serverové straně pro poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-32bit 2.1.22 182.20.1 x86_64
=Sum: Implementace Cyrus SASL API
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Lze ji použít na klientské
nebo serverové straně pro poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-crammd5 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus CRAMMD5 
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-crammd5-32bit 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus CRAMMD5 
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-digestmd5 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus DIGESTMD5
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-digestmd5-32bit 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus DIGESTMD5
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-gssapi 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl plugin for the GSSAPI mechanism
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-gssapi-32bit 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl plugin for the GSSAPI mechanism
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-plain 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus PLAIN
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-plain-32bit 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl modul pro mechanismus PLAIN
+Des:
<!-- DT:Rich -->
<p>Implementace Cyrus SASL API. Může být používána na klientské
nebo serverové straně na poskytování autentizace. Další informace
naleznete v RFC 2222.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-saslauthd 2.1.22 182.19 x86_64
=Sum: SASL ověřovací server
+Des:
<!-- DT:Rich -->
<p>This daemon is required when using cyrus-sasl in server software that should authenticate with PAM, for example.
</p>
-Des:
##----------------------------------------
=Pkg: dante 1.2.0 0.6.1 x86_64
=Sum: Klientská implementace socks v4/v5
+Des:
<!-- DT:Rich -->
<p>Dante je volně dostupnou implementací Socks protokolu, verze 4, verze 5
(rfc1928) a msproxy. Dante může být používán jako Firewall mezi sítěmi.
Vývoj prováděla spol. Inferno Nettverk A/S z Norska. Lze využít komerční podporu.
</p><p>
Tento balík obsahuje dynamické knihovny, které jsou třeba pro používání 
stávajících aplikací jako socks klient.
</p>
-Des:
##----------------------------------------
=Pkg: darts 0.31 1.22 x86_64
=Sum: Double-ARray trie systém
+Des:
<!-- DT:Rich -->
<p>Darts is a simple C++ template library to construct Double-Arrays
[Aoe 1989]. Double-Arrays are data structures to represent Trie.
These are faster than other Trie implementations.
</p><p>
Darts is used by Chasen.
</p>
-Des:
##----------------------------------------
=Pkg: dasher 4.10.1 2.1.186 x86_64
=Sum: Prediktivní vkládání textu
+Des:
<!-- DT:Rich -->
<p>Dasher je systém prediktivního vkládání textu pro situace, kdy je nevhodné
nebo nemožné použít klávesnici !napřítklad zpřístupnění nebo PDA). 
</p>
-Des:
##----------------------------------------
=Pkg: dasher-lang 4.10.1 2.1.186 x86_64
=Sum: Prediktivní vkládání textu
+Des:
<!-- DT:Rich -->
<p>Dasher je systém prediktivního vkládání textu pro situace, kdy je nevhodné
nebo nemožné použít klávesnici !napřítklad zpřístupnění nebo PDA). 
</p>
-Des:
##----------------------------------------
=Pkg: db-utils 4.5.20 95.39 x86_64
=Sum: Obslužné programy pro práci s databázemi Berkeley DB z příkazové řádky
+Des:
<!-- DT:Rich -->
<p>Berkeley DB databázová knihovna je soubor programátorských nástrojů pro
databázovou podporu aplikacím. 
</p><p>
Tento balík obsahuje utility zadávané z příkazové řádky pro práci s
databázemi Berkeley DB.
</p>
-Des:
##----------------------------------------
=Pkg: db43-32bit 4.3.29 125.17 x86_64
=Sum: Databázová knihovna Berkeley DB
+Des:
<!-- DT:Rich -->
<p>Berkeley DB databázová knihovna je soubor programátorských nástrojů pro
databázovou podporu aplikacím. 
</p><p>
Balíček obsahuje runtime knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: db43 4.3.29 125.17 x86_64
=Sum: Databázová knihovna Berkeley DB
+Des:
<!-- DT:Rich -->
<p>Berkeley DB databázová knihovna je soubor programátorských nástrojů pro
databázovou podporu aplikacím. 
</p><p>
Balíček obsahuje runtime knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: dbench 3.04 147.22 x86_64
=Sum: Benchmark souborového systému podobný Netbench
+Des:
<!-- DT:Rich -->
<p>Měřič výkonu souborového systému, který je podobný komerčnímu Netbench. Nepotřebujete generátor zatížení. Je považován za standard pro generování zátěže na Linuxovém VFS.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1 1.2.10 3.23.1 x86_64
=Sum: D-Bus Message Bus systém
+Des:
<!-- DT:Rich -->
<p>D-Bus je jednoduchý systém pro předávání zpráv mezi aplikacemi. D-Bus zahrnuje systémového démona (pro události typu přidání nového hardwaru nebo změnu tiskové fronty) a démona pro uživatelská sezení (pro obecné IPC potřeby uživatelských aplikací). Systém je postaven nad obecným frameworkem pro posílání zpráv mezi dvěma aplikacemi, který mohou dvě aplikace používat přímo (bez použití démona).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-32bit 1.2.10 3.23.1 x86_64
=Sum: D-Bus Message Bus systém
+Des:
<!-- DT:Rich -->
<p>D-Bus je jednoduchý systém pro předávání zpráv mezi aplikacemi. D-Bus zahrnuje systémového démona (pro události typu přidání nového hardwaru nebo změnu tiskové fronty) a démona pro uživatelská sezení (pro obecné IPC potřeby uživatelských aplikací). Systém je postaven nad obecným frameworkem pro posílání zpráv mezi dvěma aplikacemi, který mohou dvě aplikace používat přímo (bez použití démona).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib 0.76 34.22.1 x86_64
=Sum: Na GLib založená knihovna pro používání D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus je přídavná knihovna pro integraci standardní D-Bus knihovny
s abstrakcí vláken a hlavní smyčkou GLib.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib-32bit 0.76 34.22.1 x86_64
=Sum: Na GLib založená knihovna pro používání D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus je přídavná knihovna pro integraci standardní D-Bus knihovny
s abstrakcí vláken a hlavní smyčkou GLib.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-mono 0.63 188.1.57 x86_64
=Sum: Mono vazby pro D-Bus
+Des:
<!-- DT:Rich -->
<p>Mono vazby pro D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-python 0.83.0 27.1.43 x86_64
=Sum: Python vazby pro D-Bus
+Des:
<!-- DT:Rich -->
<p>Python vazby pro D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3 0.62 223.1.43 x86_64
=Sum: QT3/KDE vazby pro D-Bus
+Des:
<!-- DT:Rich -->
<p>QT3/KDE vazby pro D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3-32bit 0.62 223.1.43 x86_64
=Sum: QT3/KDE vazby pro D-Bus
+Des:
<!-- DT:Rich -->
<p>QT3/KDE vazby pro D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-x11 1.2.10 3.23.1 x86_64
=Sum: X11 vyžadující doplňky pro D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus obsahuje některé nástroje vyžadující instalaci Xlib. Tyto nástroje jsou
odděleny v tomto balíku, aby serverové systémy nemusely obsahovat X.
</p>
-Des:
##----------------------------------------
=Pkg: dcraw 1.404 1.21 x86_64
=Sum: Dekodování RAW fotografií
+Des:
<!-- DT:Rich -->
<p>Nástroje příkazové řádky pro dekódování a zpracování RAW digitálních fotek.
</p>
-Des:
##----------------------------------------
=Pkg: deltarpm 3.4 103.22 x86_64
=Sum: Nástroje na vytváření a aplikaci deltarpm balíčků
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje nástroje na vytváření a aplikaci deltarpm balíčků.
Jde o balíčky obsahující pouze rozdíly mezi starou a novou verzí balíčku.
Není nutné mít kopii starého RPM balíčku, protože s deltarpm se dá pracovat
přímo v systému.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet 2.28.0 1.1.93 x86_64
=Sum: Deskbar applet for GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet-lang 2.28.0 1.1.93 x86_64
=Sum: Deskbar applet for GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: desktop-file-utils 0.15 1.29 x86_64
=Sum: Nástroje pro manipulaci s desktop soubory
+Des:
<!-- DT:Rich -->
<p>Desktop-file-utils obsahuje několik nástrojů příkazové řádky
pro práci s desktop záznamy.
</p><p>
V současné době je jedinou dokumentací &quot;desktop-file-install --help&quot;.
desktop-file-validate vyžaduje jeden argument, soubor k validaci.
</p>
-Des:
##----------------------------------------
=Pkg: devhelp 2.28.1 0.1.83 x86_64
=Sum: Developer's Help Program pro GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp  nabízí:
Devhelp  nabízí:<ul>
<li>indexaci knih v XML
</li><li>HTML prohlížeč (GTKHTML2)
</li><li>vyhledávání podle funkce, struktury, makra a dalších
</li><li>automatické doplňování
</li><li>vyhledávání příkazové řádky s integrací emacs
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: devhelp-lang 2.28.1 0.1.83 x86_64
=Sum: Developer's Help Program pro GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp  nabízí:
Devhelp  nabízí:<ul>
<li>indexaci knih v XML
</li><li>HTML prohlížeč (GTKHTML2)
</li><li>vyhledávání podle funkce, struktury, makra a dalších
</li><li>automatické doplňování
</li><li>vyhledávání příkazové řádky s integrací emacs
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: device-mapper 1.02.63 18.25.1 x86_64
=Sum: Nástroje pro Device Mapper
+Des:
<!-- DT:Rich -->
<p>Programy, knihovny a manuálové stránky pro konfiguraci a práci s device mapper.
</p>
-Des:
##----------------------------------------
=Pkg: device-mapper-32bit 1.02.63 18.25.1 x86_64
=Sum: Nástroje pro Device Mapper
+Des:
<!-- DT:Rich -->
<p>Programy, knihovny a manuálové stránky pro konfiguraci a práci s device mapper.
</p>
-Des:
##----------------------------------------
=Pkg: devilspie 0.18 112.33 x86_64
=Sum: Window-Matching Utility
+Des:
<!-- DT:Rich -->
<p>Devil&#39;s Pie can be configured to detect windows as they are created
and match the window to a set of rules. If the window matches the
rules, it can perform a series of actions on that window.
</p>
-Des:
##----------------------------------------
=Pkg: devilspie-lang 0.18 112.33 x86_64
=Sum: Window-Matching Utility
+Des:
<!-- DT:Rich -->
<p>Devil&#39;s Pie can be configured to detect windows as they are created
and match the window to a set of rules. If the window matches the
rules, it can perform a series of actions on that window.
</p>
-Des:
##----------------------------------------
=Pkg: dhcp 4.2.3.P2 0.7.2 x86_64
=Sum: Běžné soubory pro ISC DHCP
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje obvyklé soubory používané programy ISC DHCP
Server (&quot;dhcp-server&quot;) a Klient (&quot;dhcp-client&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-client 4.2.3.P2 0.7.2 x86_64
=Sum: ISC DHCP klient
+Des:
<!-- DT:Rich -->
<p>Alternativní DHCP klient pro Linux, který lze použít pro konfiguraci
IP na počítači. Pomocí něj lze při zavádění operačního systému
získat ze serveru IP adresu, jméno počítače, adresu implicitní
brány, adresu DNS serveru, masku sítě a adresu pro všesměrové
vysílání.
</p><p>
Nastavuje se v /etc/dhclient.conf a lze nastavit vlastní &quot;háčky&quot;
v skriptu /sbin/dhclient-script.
</p>
-Des:
##----------------------------------------
=Pkg: dhcpcd 3.2.3 44.28.1 x86_64
=Sum: DHCP klientský démon
+Des:
<!-- DT:Rich -->
<p>Program dhcpcd slouží pro získání IP adresy a jiných informací
potřebných pro automatické zkonfigurování IP podle informací
poskytnutých DHCP serverem. Program dhcpcd se podle voleb
z příkazového řádku pokouší obnovit pronájem IP adresy.
</p>
-Des:
##----------------------------------------
=Pkg: dhcpv6 1.0.22 3.21.2 x86_64
=Sum: DHCP Client a Server pro IPv6
+Des:
<!-- DT:Rich -->
<p>Stavová automatická konfigurace adres pro IPv6 - DHCPv6.
Balíček obsahuje server i klient.
</p>
-Des:
##----------------------------------------
=Pkg: dia 0.96.1 89.35 x86_64
=Sum: Program pro kreslení diagramů
+Des:
<!-- DT:Rich -->
<p>Program dia byl navržen, aby se pracoval jako komerční program &#39;Visio&#39;.
Může být používán pro kreslení mnoha různých druhů diagramů.
V současnosti má speciální objekty, které usnadňují kreslení ER (entity-
-relationship) diagramů, UML diagramů, SADT, vývojových diagramů, síťových
diagramů a jednoduchých obvodů. Je možné přidat podporu pro nové
tvary změnou jednoduchých XML souborů používajících podmnožinu SVG pro
kreslení tvarů.
</p><p>
</p><p>
Dia může načítat a ukládat diagramy ve speciálním XML formátu (implicitně
komprimované programem gzip), může exportovat diagramy
do formátu EPS, PNG, CGM nebo SVG a může diagramy tisknout (včetně
takových, které zabírají více stránek).
</p>
-Des:
##----------------------------------------
=Pkg: dia-lang 0.96.1 89.35 x86_64
=Sum: Program pro kreslení diagramů
+Des:
<!-- DT:Rich -->
<p>Program dia byl navržen, aby se pracoval jako komerční program &#39;Visio&#39;.
Může být používán pro kreslení mnoha různých druhů diagramů.
V současnosti má speciální objekty, které usnadňují kreslení ER (entity-
-relationship) diagramů, UML diagramů, SADT, vývojových diagramů, síťových
diagramů a jednoduchých obvodů. Je možné přidat podporu pro nové
tvary změnou jednoduchých XML souborů používajících podmnožinu SVG pro
kreslení tvarů.
</p><p>
</p><p>
Dia může načítat a ukládat diagramy ve speciálním XML formátu (implicitně
komprimované programem gzip), může exportovat diagramy
do formátu EPS, PNG, CGM nebo SVG a může diagramy tisknout (včetně
takových, které zabírají více stránek).
</p>
-Des:
##----------------------------------------
=Pkg: dialog 1.1 27.23.1 x86_64
=Sum: Dialogy a menu pro shellové skripty
+Des:
<!-- DT:Rich -->
<p>Tento program umožňuje používat menu a dialogová okna v shellových
skriptech.
</p>
-Des:
##----------------------------------------
=Pkg: dicts 1.5 364.7 x86_64
=Sum: Soubory slovníků pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje zdrojové soubory slovníků pro ispell:
</p><p>
brazilský    (přeložený pro použití ispellem je v balíčku ispell-brazilian)
</p><p>
český          (přeložený pro použití ispellem je v balíčku ispell-czech)
</p><p>
dánský         (přeložený pro použití ispellem je v balíčku ispell-danish)
</p><p>
finský      (přeložený pro použití ispellem je v balíčku ispell-finnish)
</p><p>
francouzský    (přeložený pro použití ispellem je v balíčku ispell-french)
</p><p>
estonský     (přeložený pro použití ispellem je v balíčku ispell-estonian)
</p><p>
holandský      (přeložený pro použití ispellem je v balíčku ispell-dutch)
</p><p>
italský        (přeložený pro použití ispellem je v balíčku ispell-italian)
</p><p>
katalánský     (přeložený pro použití ispellem je v balíčku ispell-catalan)
</p><p>
německý        (přeložený pro použití ispellem je v balíčku ispell-german)
</p><p>
norský         (přeložený pro použití ispellem je v balíčku ispell-norsk)
</p><p>
nový německý   (přeložený pro použití ispellem je v balíčku ispell-ngerman)
</p><p>
nový švýcarský (přeložený pro použití ispellem je v balíčku ispell-nswiss)
</p><p>
polský         (přeložený pro použití ispellem je v balíčku ispell-polish)
</p><p>
portugalský    (přeložený pro použití ispellem je v balíčku ispell-portuguese)
</p><p>
ruský          (přeložený pro použití ispellem je v balíčku ispell-russian)
</p><p>
řecký          (přeložený pro použití ispellem je v balíčku ispell-greek)
</p><p>
španělský      (přeložený pro použití ispellem je v balíčku ispell-spanish)
</p><p>
švédský        (přeložený pro použití ispellem je v balíčku ispell-swedish)
</p><p>
Přečtěte si prosím soubory README v adresářích /usr/src/dicts.
</p>
-Des:
##----------------------------------------
=Pkg: diffutils 2.8.7 143.23.1 x86_64
=Sum: Nástroje GNU diff
+Des:
<!-- DT:Rich -->
<p>Programy GNU diff slouží k hledání rozdílů mezi soubory, lze je použít například k vytváření záplat zdrojových kódů.
</p>
-Des:
##----------------------------------------
=Pkg: digikam 0.10.0 6.3.73 x86_64
=Sum: KDE správce fotek
+Des:
<!-- DT:Rich -->
<p>digiKam is a simple digital photo management application for KDE, which allows you to import and organize your digital photos easily. The photos can be organized in albums, which can be sorted chronologically, by directory layout, or by custom collections. An easy-to-use interface that enables you to connect to your camera and preview, download, or delete your images, is provided.
</p>
-Des:
##----------------------------------------
=Pkg: digikam-lang 0.10.0 6.3.73 x86_64
=Sum: KDE správce fotek
+Des:
<!-- DT:Rich -->
<p>digiKam is a simple digital photo management application for KDE, which allows you to import and organize your digital photos easily. The photos can be organized in albums, which can be sorted chronologically, by directory layout, or by custom collections. An easy-to-use interface that enables you to connect to your camera and preview, download, or delete your images, is provided.
</p>
-Des:
##----------------------------------------
=Pkg: dirac 1.0.2 17.16.38 x86_64
=Sum: Dirac Video Codec
+Des:
<!-- DT:Rich -->
<p>Dirac is an open source video codec. It uses a traditional hybrid video codec architecture, but with the wavelet transform instead of the usual block transforms.  Motion compensation uses overlapped blocks to reduce block artefacts that would upset the transform coding stage.
</p><p>
Dirac can code just about any size of video, from streaming up to HD and beyond, although certain presets are defined for different applications and standards.  These cover the parameters that need to be set for the encoder to work, such as block sizes and temporal prediction structures, which must otherwise be set by hand.
</p><p>
Dirac is intended to develop into real coding and decoding software, capable of plugging into video processing applications and media players that need compression. It is intended to develop into a simple set of reliable but effective coding tools that work over a wide variety of content and formats, using well-understood compression techniques, in a clear and accessible software structure. It is not intended as a demonstration or reference coder.
</p>
-Des:
##----------------------------------------
=Pkg: dirmngr 1.0.2 1.19 x86_64
=Sum: Klient pro správu a stahování CRL.
+Des:
<!-- DT:Rich -->
<p>Dirmngr je klient pro správu a stahování seznamů zneplatněných certifikátů
(CRL) pro certifikáty X.509 a pro stahování samotných certifikátů.
</p>
-Des:
##----------------------------------------
=Pkg: dmapi 2.2.10 8.7.2 x86_64
=Sum: Data Management API Runtime Environment
+Des:
<!-- DT:Rich -->
<p>Soubory jsou využívány systémovým softwarem používajícím DMAPI
(Data Management API) při implementaci rozhraní definovaného v X/Open
dokumentu.
</p>
-Des:
##----------------------------------------
=Pkg: dmraid 1.0.0.rc16 0.12.1 x86_64
=Sum: Nástroj pro mapper softwarového RAIDu
+Des:
<!-- DT:Rich -->
<p>Tento software zjišťuje, aktivuje, deaktivuje a zobrazuje vlastnosti nastavení
skupin softwarového RAUDu, např. ATARAID obsahující dosové oddíly.
</p><p>
dmraid používá libdevmapper a běhové prostředí jádra device-mapperu k vytváření
zařízení s příslušným mapováním RAIDových skupin.
</p><p>
Podporovány jsou následující typy ATARAID:
</p><p>
Highpoint HPT37X
Highpoint HPT45X
Intel Software RAID
Promise FastTrack
Silicon Image Medley
</p>
-Des:
##----------------------------------------
=Pkg: dmxviewer 0.1.6 1.17 x86_64
=Sum: DMX viewer
+Des:
<!-- DT:Rich -->
<p>Efficiently view and control remote desktop sessions on local X server.
</p>
-Des:
##----------------------------------------
=Pkg: dnsmasq 2.45 12.23.1 x86_64
=Sum: Lightweight, Easy-to-Configure DNS Forwarder and DHCP Server
+Des:
<!-- DT:Rich -->
<p>Dnsmasq is a lightweight, easy-to-configure DNS forwarder and DHCP server. It is designed to provide DNS and, optionally, DHCP, to a small network. It can serve the names of local machines that are not in the global DNS. The DHCP server integrates with the DNS server and allows machines with DHCP-allocated
addresses to appear in DNS with names configured either in each host or in a central configuration file. Dnsmasq supports static and dynamic DHCP leases and BOOTP for network booting of diskless machines.
</p>
-Des:
##----------------------------------------
=Pkg: dolphin 4.3.5 0.1.74 x86_64
=Sum: KDE File Manager
+Des:
<!-- DT:Rich -->
<p>This package contains the default file manager of KDE 4.
</p>
-Des:
##----------------------------------------
=Pkg: dos2unix 3.1 438.22.1 x86_64
=Sum: Textový konvertor mezi DOSem a UNIXem
+Des:
<!-- DT:Rich -->
<p>dos2unix je filtr sloužící filtrování textu z DOSu (CR/LF) do UNIXu (LF) a obráceně.
</p>
-Des:
##----------------------------------------
=Pkg: dosfstools 2.11 121.30.1 x86_64
=Sum: Nástroje pro kontrolu a vytváření souborového systému MS-DOS FAT
+Des:
<!-- DT:Rich -->
<p>Balíček dosfstools obsahuje utility mkdosfs a dosfsck. mkdosfs vytváří
a dosfsck kontroluje souborový systém MS-DOS FAT na pevných či pružných
discích.
</p>
-Des:
##----------------------------------------
=Pkg: dotconf 1.0.13 50.22 x86_64
=Sum: Configuration file parser library
+Des:
<!-- DT:Rich -->
<p>dotconf is a simple-to-use and powerful configuration-file parser
library written in C. The configuration files created for dotconf
look very similar to those used by the Apache Webserver. Even
Container-Directives known from httpd.conf can easily be used in the
exact same manner as for Apache-Modules. It supports various types of
arguments, dynamically loadable modules that create their own
configuration options on-the-fly, a here-documents feature to pass
very long ARG_STR data to your app, and on-the-fly inclusion of
additional config files.
</p>
-Des:
##----------------------------------------
=Pkg: dotconf-devel 1.0.13 50.22 x86_64
=Sum: Configuration file parser library
+Des:
<!-- DT:Rich -->
<p>dotconf is a simple-to-use and powerful configuration-file parser
library written in C. The configuration files created for dotconf
look very similar to those used by the Apache Webserver. Even
Container-Directives known from httpd.conf can easily be used in the
exact same manner as for Apache-Modules. It supports various types of
arguments, dynamically loadable modules that create their own
configuration options on-the-fly, a here-documents feature to pass
very long ARG_STR data to your app, and on-the-fly inclusion of
additional config files.
</p>
-Des:
##----------------------------------------
=Pkg: doxygen 1.5.6 1.19 x86_64
=Sum: Automatizovaný generátor dokumentace pro C, C++ a Javu
+Des:
<!-- DT:Rich -->
<p>Doxygen je systém pro vytváření dokumentace pro programy v jazyce C,
C++, Java a IDL. Umí vytvořit HTML i LaTeX dokumentaci přímo ze zdrojových textů. Doxygen byl vyvinut na Linuxu, ale běží na většině odrůd Unixu. Je
k dispozici i pro Windows 95/NT.
</p>
-Des:
##----------------------------------------
=Pkg: dvd+rw-tools 7.1 35.21 x86_64
=Sum: Kolekce programů pro vytváření DVD+RW/+R médií
##----------------------------------------
=Pkg: e2fsprogs 1.41.9 2.7.1 x86_64
=Sum: Programy pro systém souborů ext2
+Des:
<!-- DT:Rich -->
<p>Programy potřebné pro vytváření a údržbu diskových oddílů typu ext2
a ext3 v Linuxu. V balíčku jsou obsaženy programy chattr, lsattr, mke2fs,
mklost+found, tune2fs, e2fsck, resize2fs a badblocks.
</p>
-Des:
##----------------------------------------
=Pkg: e3 2.6.3 2.6 x86_64
=Sum: Velmi malý editor s vi, emacs, Wordstar režimy
+Des:
<!-- DT:Rich -->
<p>Velice malý editor, který nabízí mnoho různých režimů (vi, emacs, wordstar).
Wordstar je standardní režim.
</p>
-Des:
##----------------------------------------
=Pkg: eID-belgium 2.6.0 123.6 x86_64
=Sum: Belgian eID middleware
+Des:
<!-- DT:Rich -->
<p>Knihovnu PKCS11 lze použít pro kryptografické operace s belgickou
elektronickou identifikační kartou. Můžete ji například použít k autentizaci
na webové stránce nebo k podepsání elektronických dokumentů právně
závazným podpisem.
</p>
-Des:
##----------------------------------------
=Pkg: eIDconfig-belgium 1.1.3 1.41 x86_64
=Sum: Configuration toolkit for the Belgian eID middleware
+Des:
<!-- DT:Rich -->
<p>eIDconfig-belgium aims at easing the configuration of both the Belgian eID middleware and applications that can use this middleware to interact with the Belgian eID card.
</p>
-Des:
##----------------------------------------
=Pkg: eb 4.3 62.21 x86_64
=Sum: EB je knihovna jazyka C zpřístupňující CD-ROM knihy
+Des:
<!-- DT:Rich -->
<p>EB Library je knihovna pro jazyk C zpřístupňující CD-ROM knihy určená
pro unixové systémy. EB Library podporuje přístup k CD-ROM knihám ve
formátech EB, EBG, EBXA, EBXA-C, S-EBXA a EPWING. Tyto formáty CD-ROM
knih jsou populární v Japonsku. Protože CD-ROM knihy vycházejí z formátu
ISO 9660, můžete tyto disky připojovat stejným způsobem jako jiné ISO
9660 disky.
</p>
-Des:
##----------------------------------------
=Pkg: ecryptfs-utils-32bit 61 1.29.1 x86_64
=Sum: Userspace Utilities for ecryptfs
+Des:
<!-- DT:Rich -->
<p>A stacked cryptographic filesystem for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ecryptfs-utils 61 1.29.1 x86_64
=Sum: Userspace Utilities for ecryptfs
+Des:
<!-- DT:Rich -->
<p>A stacked cryptographic filesystem for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ed 0.2 1001.30.1 x86_64
=Sum: Standardní unixový řádkový editor
+Des:
<!-- DT:Rich -->
<p>Standardní starý unixový řádkový editor.
</p>
-Des:
##----------------------------------------
=Pkg: efibootmgr 0.5.4 15.28.2 x86_64
=Sum: Zavaděč systému EFI
+Des:
<!-- DT:Rich -->
<p>EFI Boot Manager vypisuje a umožňuje uživatelům upravovat proměnné
pro zavaděče Extensible Firmware Interface (EFI) . Bližší informace
můžete nalézt na &lt;http://developer.intel.com/technology/efi/efi.htm&gt;.
</p>
-Des:
##----------------------------------------
=Pkg: eiciel 0.9.6.1 11.16.1 x86_64
=Sum: GNOME ACL viewer and editor
+Des:
<!-- DT:Rich -->
<p>Eiciel allows you to visually edit file ACL entries. You can add and remove
users and groups who will be granted permissions through the graphical
interface.
</p>
-Des:
##----------------------------------------
=Pkg: eiciel-lang 0.9.6.1 11.16.1 x86_64
=Sum: GNOME ACL viewer and editor
+Des:
<!-- DT:Rich -->
<p>Eiciel allows you to visually edit file ACL entries. You can add and remove
users and groups who will be granted permissions through the graphical
interface.
</p>
-Des:
##----------------------------------------
=Pkg: eject 2.1.0 115.19.2.1 x86_64
=Sum: Program pro softwarové vysouvání médií
+Des:
<!-- DT:Rich -->
<p></p><p>
Program slouží k softwarovému vysouvání výměnných médií (typicky CD-ROM,
disketa, páska, Jaz nebo ZIP). U některých jednotek umožňuje také řídit
vlastnost auto-eject, automatické zavírání šuplíku některých CD mechanik
a může být používán i pro výměnu CD v CD měniči.
</p>
-Des:
##----------------------------------------
=Pkg: ekiga 3.0.1 2.35 x86_64
=Sum: A Gnome based SIP/H323 teleconferencing application
+Des:
<!-- DT:Rich -->
<p>Ekiga (formely known as GnomeMeeting) is an open source VoIP and video conferencing application for GNOME. Ekiga uses both the H.323 and SIP protocols. It supports many audio and video codecs, and is interoperable with other SIP compliant software and also with Microsoft NetMeeting.
</p>
-Des:
##----------------------------------------
=Pkg: ekiga-lang 3.0.1 2.35 x86_64
=Sum: A Gnome based SIP/H323 teleconferencing application
+Des:
<!-- DT:Rich -->
<p>Ekiga (formely known as GnomeMeeting) is an open source VoIP and video conferencing application for GNOME. Ekiga uses both the H.323 and SIP protocols. It supports many audio and video codecs, and is interoperable with other SIP compliant software and also with Microsoft NetMeeting.
</p>
-Des:
##----------------------------------------
=Pkg: elfutils 0.152 4.7.86 x86_64
=Sum: Higher-level library to access ELF
+Des:
<!-- DT:Rich -->
<p>This package provides a higher-level library to access ELF files.
This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: elilo 3.14 0.10.11.11 x86_64
=Sum: Linuxový zavaděč EFI
+Del:
<!-- DT:Rich -->
<p>This package is required for the proper operation and management of
your Linux system.
</p><p>
Remove this package only if you are really sure of what you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Linuxový zavaděč EFI.
</p>
-Des:
##----------------------------------------
=Pkg: emacs 22.3 4.36.1 x86_64
=Sum: GNU Emacs - hlavní balíček
+Des:
<!-- DT:Rich -->
<p>Basic package for the GNU Emacs editor.
Requires <a href="pkg://emacs-x11">emacs-x11</a>
or <a href="pkg://emacs-nox">emacs-nox</a>.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-info 22.3 4.36.1 x86_64
=Sum: Info soubory pro GNU Emacs
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje všechny info soubory pro GNU Emacs. Soubory
popisují emacs a některé jeho režimy a mohou být čteny online přímo
z GNU emacsu.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-x11 22.3 4.36.1 x86_64
=Sum: GNU Emacs: Emacs s podporou X11
+Des:
<!-- DT:Rich -->
<p>Call it
</p><p>
Emacs
</p><p>
Love it or leave it.
This is the Emacs binary with X Window System Support.
</p>
-Des:
##----------------------------------------
=Pkg: empathy 2.28.2 0.10.2 x86_64
=Sum: Empathy GNOME Instant Messenger
+Des:
<!-- DT:Rich -->
<p>Empathy is the GNOME Instant Messenger application. It uses Telepathy and Nokia&#39;s
Mission Control, and support a wide variety or services.
</p>
-Des:
##----------------------------------------
=Pkg: empathy-lang 2.28.2 0.10.2 x86_64
=Sum: Empathy GNOME Instant Messenger
+Des:
<!-- DT:Rich -->
<p>Empathy is the GNOME Instant Messenger application. It uses Telepathy and Nokia&#39;s
Mission Control, and support a wide variety or services.
</p>
-Des:
##----------------------------------------
=Pkg: enca 1.13 8.8.19 x86_64
=Sum: Detects encoding of text files
+Des:
<!-- DT:Rich -->
<p>Enca is an Extremely Naive Charset Analyser. It detects character set and
encoding of text files and can also convert them to other encodings using
either a built-in converter or external libraries and tools like libiconv,
librecode, or cstocs.
</p><p>
Currently, it has support for Belarussian, Bulgarian, Croatian, Czech,
Estonian, Latvian, Lithuanian, Polish, Russian, Slovak, Slovene, Ukrainian,
Chinese, and some multibyte encodings (mostly variants of Unicode)
independent on the language.
</p><p>
This package also contains shared Enca library other programs can make use of.
</p><p>
Install Enca if you need to cope with text files of dubious origin
and unknown encoding and convert them to some reasonable encoding.
</p>
-Des:
##----------------------------------------
=Pkg: enchant 1.4.2 16.26 x86_64
=Sum: Generic Spell Checking Library
+Des:
<!-- DT:Rich -->
<p>A library providing an efficient extensible abstraction for dealing with different spell checking libraries.
</p>
-Des:
##----------------------------------------
=Pkg: enchant-voikko 1.4.2 16.26 x86_64
=Sum: Generic Spell Checking Library - Voikko Plugin
+Des:
<!-- DT:Rich -->
<p>Voikko plugin (Finnish) for enchant, a library providing an efficient extensible abstraction for dealing with different spell checking libraries.
</p>
-Des:
##----------------------------------------
=Pkg: enscript 1.6.4 152.22.1 x86_64
=Sum: Konvertor z ASCII do PostScriptu(tm)
+Des:
<!-- DT:Rich -->
<p>Enscript converts ASCII files to PostScript and writes the generated
output to a file or sends it directly to the printer.
</p><p>
The Enscript configuration file is in /etc/enscript.cfg.
</p><p>
Warning: enscript is not able to convert complex unicode (UTF-8)
text to PostScript.  Only language text which can be converted
from UTF-8 to latin encodings are supported with the help of
a wrapper script.
~
~
</p>
-Des:
##----------------------------------------
=Pkg: eog 2.28.2 0.1.150 x86_64
=Sum: Eye Of GNOME pro prostředí GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Eye of GNOME je velice rychlý prohlížeč obrázků, který je možnépoužít jako zásuvný modul pro Nautilus nebo samostatnouaplikaci. Tato verze EOG je zkompilována pro GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: eog-lang 2.28.2 0.1.150 x86_64
=Sum: Eye Of GNOME pro prostředí GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Eye of GNOME je velice rychlý prohlížeč obrázků, který je možnépoužít jako zásuvný modul pro Nautilus nebo samostatnouaplikaci. Tato verze EOG je zkompilována pro GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: espeak 1.39 2.29 x86_64
=Sum: TTS system for English/German and other languages
+Des:
<!-- DT:Rich -->
<p>espeak is a multi-lingual text-to-speach system
</p>
-Des:
##----------------------------------------
=Pkg: ethtool 6.2.6.39 0.7.1 x86_64
=Sum: Zjišťování a ladění ethernetových síťových zařízení
+Des:
<!-- DT:Rich -->
<p>Ethtool je nástroj pro ladění a kontrolu ethernet zařízení.
Více informací naleznete v manuálové stránce.
</p>
-Des:
##----------------------------------------
=Pkg: evince 2.28.2 0.7.2 x86_64
=Sum: GNOME prohlížeč dokumentace
+Des:
<!-- DT:Rich -->
<p>Evince is a document viewer capable of displaying multiple and singlepage document formats like PDF and PostScript.
For more information about Evince, visit the project Web site at
http://www.gnome.org/projects/evince/.
</p>
-Des:
##----------------------------------------
=Pkg: evince-lang 2.28.2 0.7.2 x86_64
=Sum: GNOME prohlížeč dokumentace
+Des:
<!-- DT:Rich -->
<p>Evince is a document viewer capable of displaying multiple and singlepage document formats like PDF and PostScript.
For more information about Evince, visit the project Web site at
http://www.gnome.org/projects/evince/.
</p>
-Des:
##----------------------------------------
=Pkg: evoldap2-client 2.4.12 4.19 x86_64
=Sum: NTLM patched OpenLDAP library for Evolution
+Des:
<!-- DT:Rich -->
<p>OpenLDAP Client Utilities
</p><p>
This package contains the NTLM patched OpenLDAP client utilities for Evolution
</p>
-Des:
##----------------------------------------
=Pkg: evolution 2.28.2 0.25.30.18 x86_64
=Sum: Integrovaný poštovní klient, kalendář a seznam adres pro GNOME
+Des:
<!-- DT:Rich -->
<p>Evolution se skládá z modulárních součástí (v současnosti poštovní program
kalendář a seznam adres), které vám ulehčí každodenní starosti.
Díky své modulární stavbě je tento program velice flexibilní a lze začleňovat
nové moduly či připojit již existující k jiným aplikacím.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server 2.28.2 0.26.33.14 x86_64
=Sum: Datový server Evolution
+Des:
<!-- DT:Rich -->
<p>Datový server Evolution poskytuje centralizované řešení pro uložení adresáře a kalendáře pro prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server-32bit 2.28.2 0.26.33.14 x86_64
=Sum: Datový server Evolution
+Des:
<!-- DT:Rich -->
<p>Datový server Evolution poskytuje centralizované řešení pro uložení adresáře a kalendáře pro prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server-lang 2.28.2 0.26.33.14 x86_64
=Sum: Datový server Evolution
+Des:
<!-- DT:Rich -->
<p>Datový server Evolution poskytuje centralizované řešení pro uložení adresáře a kalendáře pro prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-ews 2.28 0.7.12.15 x86_64
=Sum: Provides exchange connectivity for exchange server 2007 and later.
+Des:
<!-- DT:Rich -->
<p>Provides exchange connectivity for exchange server 2007 and later using exchange web services protocol.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-ews-lang 2.28 0.7.12.15 x86_64
=Sum: Provides exchange connectivity for exchange server 2007 and later.
+Des:
<!-- DT:Rich -->
<p>Provides exchange connectivity for exchange server 2007 and later using exchange web services protocol.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-exchange 2.28.2 0.16.2 x86_64
=Sum: Evolution Connector pro Microsoft Exchange Server 2000/2003
+Des:
<!-- DT:Rich -->
<p>Je-li nainstalován Connector for Microsoft Exchange, funguje Evolution jako klient Exchange. Uživatelům umožňuje účastnit se plně plánování a kolaborativních úloh v podnikovém prostředí. Uživatelé Linuxu a Solarisu mohou přistupovat k veřejným složkám, globálním adresářům, poště, kalendáři, seznamům úloh a skupinovému plánování.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-exchange-lang 2.28.2 0.16.2 x86_64
=Sum: Evolution Connector pro Microsoft Exchange Server 2000/2003
+Des:
<!-- DT:Rich -->
<p>Je-li nainstalován Connector for Microsoft Exchange, funguje Evolution jako klient Exchange. Uživatelům umožňuje účastnit se plně plánování a kolaborativních úloh v podnikovém prostředí. Uživatelé Linuxu a Solarisu mohou přistupovat k veřejným složkám, globálním adresářům, poště, kalendáři, seznamům úloh a skupinovému plánování.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-lang 2.28.2 0.25.30.18 x86_64
=Sum: Integrovaný poštovní klient, kalendář a seznam adres pro GNOME
+Des:
<!-- DT:Rich -->
<p>Evolution se skládá z modulárních součástí (v současnosti poštovní program
kalendář a seznam adres), které vám ulehčí každodenní starosti.
Díky své modulární stavbě je tento program velice flexibilní a lze začleňovat
nové moduly či připojit již existující k jiným aplikacím.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mapi-provider 0.28.2 0.13.2 x86_64
=Sum: Exchange MAPI plugin for Evolution (experimental)
+Des:
<!-- DT:Rich -->
<p>This package provides the Exchange MAPI Account Setup plugin in Evolution and the
corresponding mail, addressbook and calendar backends for Evolution-Data-Server. It depends on the alpha-release of Samba 4 and the MAPI library provided by OpenChange.
</p><p>
NOTE: This plugin is highly experimental and may not work as intended.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mapi-provider-lang 0.28.2 0.13.2 x86_64
=Sum: Exchange MAPI plugin for Evolution (experimental)
+Des:
<!-- DT:Rich -->
<p>This package provides the Exchange MAPI Account Setup plugin in Evolution and the
corresponding mail, addressbook and calendar backends for Evolution-Data-Server. It depends on the alpha-release of Samba 4 and the MAPI library provided by OpenChange.
</p><p>
NOTE: This plugin is highly experimental and may not work as intended.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mono-providers 0.1.1 7.15 x86_64
=Sum: Evolution backends written using mono
+Des:
<!-- DT:Rich -->
<p>Extensions written for Evolution and Evolution Data Server for the mono runtime.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-pilot 2.28.2 0.25.30.18 x86_64
=Sum: Integrovaný poštovní klient, kalendář a seznam adres pro GNOME
+Des:
<!-- DT:Rich -->
<p>Evolution obsahuje mnoho součástí (v současnosti poštovní program
kalendář a seznam adres), které vám ulehčí každodenní starosti.
Díky své modulární stavbě je tento program velice flexibilní a lze začleňovat
nové moduly či připojit již existující k jiným aplikacím.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-sharp 0.18.1 3.41 x86_64
=Sum: Mono vazby pro Evolution
+Des:
<!-- DT:Rich -->
<p>Mono vazby pro Evolution.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-webcal 2.24.0 5.16.43 x86_64
=Sum: Evolution Webcal
+Des:
<!-- DT:Rich -->
<p>Webcal subscribes to Web calendars for Evolution.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-webcal-lang 2.24.0 5.16.43 x86_64
=Sum: Evolution Webcal
+Des:
<!-- DT:Rich -->
<p>Webcal subscribes to Web calendars for Evolution.
</p>
-Des:
##----------------------------------------
=Pkg: expat 2.0.1 88.26.1 x86_64
=Sum: Soubor nástrojů pro syntaktickou analýzu XML
+Des:
<!-- DT:Rich -->
<p>Expat je syntaktický analyzátor XML 1.0 napsaný v jazyce C.
Cílem je plně odpovídat standardu. V současné době to není
validační XML procesor. Poslední verzi lze získat na adrese
ftp://ftp.jclark.com/pub/xml/expat.zip.
Adresář xmltok obsahuje nízkoúrovňovou knihovnu pro převod XML
na tokeny. Rozhraní je dokumentováno v xmltok/xmltok.h.
Adresář xmlparse obsahuje knihovnu analyzátoru XML postavenou
nad knihovnou xmltok. Rozhraní je dokumentováno v xmlparse/xmlparse.h.
Adresář sample obsahuje jednoduchý příklad programu využívajícího
toto rozhraní. Dávkový soubor sample/build.bat slouží k sestavení
příkladu pomocí Visual C++.
Adresář xmlwf obsahuje aplikaci xmlwf, která používá knihovnu xmlparse.
Parametry příkazu xmlwf jsou soubory, které budou zkontrolovány
zda jsou správně formátovány. Můžete zadat jako parametr i adresář:
-d adresář. Pro každý dobře naformátovaný vstupní soubor bude vygenerován
odpovídající xml soubor v kanonickém tvaru. Parametr -x způsobí, že budou
zpracovány i odkazy na externí entity. Parametr -s prohlásí za chybné soubory,
které nejsou samostatné.
</p>
-Des:
##----------------------------------------
=Pkg: expect 5.44.1.11 1.241.1 x86_64
=Sum: Nástroj pro automatizaci používání interaktivních programů
+Des:
<!-- DT:Rich -->
<p>Expect je nástroj navržený zejména pro automatizaci používání
interaktivních aplikací, jako je telnet, ftp, passwd, fsck, rlogin,
tip, atd. S programem expect lze snadno vytvářet neinteraktivní
nadstavby nad těmito programy. Expect je také užitečný pro testování
uvedených aplikací. Expect je popsán v mnoha knihách, článcích,
přednáškách a dalších dokumentech. Existuje celá kniha o programu
expect z nakladatelství O&#39;Reilly.
</p>
-Des:
##----------------------------------------
=Pkg: f-spot 0.8.2 12.15.1 x86_64
=Sum: GNOME aplikace pro správu fotografií
+Des:
<!-- DT:Rich -->
<p>F-Spot is a full-featured personal photo management application for the GNOME desktop.
</p><p>
F-Spot simplifies digital photography by providing intuitive tools to help you share, touch-up, find and organize your images.
</p>
-Des:
##----------------------------------------
=Pkg: f-spot-extension-beagle 0.8.2 12.15.1 x86_64
=Sum: GNOME aplikace pro správu fotografií
+Des:
<!-- DT:Rich -->
<p>F-Spot is a full-featured personal photo management application for the GNOME desktop.
</p><p>
F-Spot simplifies digital photography by providing intuitive tools to help you share, touch-up, find and organize your images.
</p>
-Des:
##----------------------------------------
=Pkg: f-spot-lang 0.8.2 12.15.1 x86_64
=Sum: GNOME aplikace pro správu fotografií
+Des:
<!-- DT:Rich -->
<p>F-Spot is a full-featured personal photo management application for the GNOME desktop.
</p><p>
F-Spot simplifies digital photography by providing intuitive tools to help you share, touch-up, find and organize your images.
</p>
-Des:
##----------------------------------------
=Pkg: facter 1.5.2 1.20 x86_64
=Sum: A cross-platform Ruby library for retrieving facts from operating systems
+Des:
<!-- DT:Rich -->
<p>A cross-platform Ruby library for retrieving facts from operating systems.
Supports multiple resolution mechanisms, any of which can be restricted to
working only on certain operating systems or environments. Facter is especially
useful for retrieving things like operating system names, IP addresses, MAC
addresses, and SSH keys.
</p>
-Des:
##----------------------------------------
=Pkg: fam 2.7.0 130.21 x86_64
=Sum: Démon monitorující změny souborů
+Des:
<!-- DT:Rich -->
<p>Služba FAM hlásí změny programů souborového systému. Při změně
nebo vytvoření souboru dostanete zprávu.
</p><p>
Tento balíček obsahuje libfam, který je používán v KDE a GNOME a také
příkaz &quot;fileschanged&quot;.Pokud chcete použít démona pro NFS (snižuje zatížení serveru) musíte
nainstalovat balíček fam-server.
</p>
-Des:
##----------------------------------------
=Pkg: fam-32bit 2.7.0 130.21 x86_64
=Sum: Démon monitorující změny souborů
+Des:
<!-- DT:Rich -->
<p>Služba FAM hlásí změny programů souborového systému. Při změně
nebo vytvoření souboru dostanete zprávu.
</p><p>
Tento balíček obsahuje libfam, který je používán v KDE a GNOME a také
příkaz &quot;fileschanged&quot;.Pokud chcete použít démona pro NFS (snižuje zatížení serveru) musíte
nainstalovat balíček fam-server.
</p>
-Des:
##----------------------------------------
=Pkg: fam-server 2.7.0 130.21 x86_64
=Sum: Démon monitorující změny souborů
+Des:
<!-- DT:Rich -->
<p>Služba FAM hlásí změny programů souborového systému.
</p><p>
Balíček obsahuje démona a spouštěcí skripty.
</p>
-Des:
##----------------------------------------
=Pkg: farsight 0.1.28 1.36 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: fbiterm 0.5.20040304 259.27 x86_64
=Sum: Emulátor terminálu s mezinárodní podporou pro framebuffer
+Des:
<!-- DT:Rich -->
<p>Emulátor terminálu s mezinárodní podporou pro framebuffer.
</p>
-Des:
##----------------------------------------
=Pkg: fbset 2.1 919.22 x86_64
=Sum: Nástroj pro konfiguraci framebufferu
+Des:
<!-- DT:Rich -->
<p>FBSet slouží k nastavení framebufferu konzole.
</p><p>
Některé framebuffery to nepodporují, jako například
VESA framebuffer &quot;vesafb&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: festival 1.96 73.7 x86_64
=Sum: Systém hlasové syntézy Festival
+Des:
<!-- DT:Rich -->
<p>Festival je vícejazyčný systém pro hlasovou syntézu navržený v CSTR. Nabízí kompletní systém hlasové syntézy s řadou API a prostředím pro vývoj a výzkum technik hlasové syntézy. Je napsán v C++ a pro základní ovládání poskytuje interpret příkazů založený na jazyku Scheme.
</p>
-Des:
##----------------------------------------
=Pkg: fetchmail 6.3.8.90 13.20.19.1 x86_64
=Sum: Plnohodnotný démon pro stahování POP/IMAP pošty
+Des:
<!-- DT:Rich -->
<p>Fetchmail je plnohodnotný, robustní a dobře dokumentovaný
program pro vybírání pošty ze vzdálených serverů a její další rozesílání.
Byl navržen pro používání přes komutované TCP/IP linky (SLIP nebo PPP).
</p><p>
Vybírá poštu ze vzdálených poštovních serverů a předává ji programu pro
doručování pošty na lokálním stroji, takže může být čtena normálními
uživatelskými poštovními programy jako je mutt, elm, pine, (x)emacs/gnus
nebo mailx.
</p><p>
K fetchmailu existuje interaktivní grafický konfigurační program
fetchmailconf vhodný pro koncové uživatele (balík fetchmailconf).
</p>
-Des:
##----------------------------------------
=Pkg: ffado 2.0.1 8.7.33 x86_64
=Sum: FireWire 1394 support for audio devices, svn snapshot
+Des:
<!-- DT:Rich -->
<p>FFADO aims to provide a generic, open-source solution
to support FireWire(IEEE1394, iLink) based (semi-)
professional audio interfaces.
It&#39;s the successor of the FreeBoB project. FFADO is a
volunteer-based community effort, trying to provide Linux
with at least the same level of functionality that is
present on the other operating systems.
The range of FireWire Audio Devices that we would like
to support is broad: from pure audio interfaces over
mixed audio-control devices to DSP algorithm devices.
This is a snapshot of svn revision 1855
</p>
-Des:
##----------------------------------------
=Pkg: ffado-mixer 2.0.1 2.7.68 x86_64
=Sum: FireWire 1394 support for audio devices, svn snapshot
+Des:
<!-- DT:Rich -->
<p>FFADO aims to provide a generic, open-source solution
to support FireWire(IEEE1394, iLink) based (semi-)
professional audio interfaces.
It&#39;s the successor of the FreeBoB project. FFADO is a
volunteer-based community effort, trying to provide Linux
with at least the same level of functionality that is
present on the other operating systems.
The range of FireWire Audio Devices that we would like
to support is broad: from pure audio interfaces over
mixed audio-control devices to DSP algorithm devices.
This is a snapshot of svn revision 1855
</p>
-Des:
##----------------------------------------
=Pkg: fftw 2.1.5 64.16 x86_64
=Sum: Knihovna pro počítání diskrétní Fourierovy transformace (DFT) pro C
+Des:
<!-- DT:Rich -->
<p>FFTW je knihovna pro jazyk C pro výpočet jedno nebo vícerozměrné
diskrétní Fourierovy transformace (DFT). Umožňuje pracovat s reálnými
i komplexními daty s libovolnou vstupní velikostí.
</p>
-Des:
##----------------------------------------
=Pkg: fftw3 3.1.2 110.7 x86_64
=Sum: Knihovna pro počítání diskrétní Fourierovy transformace (DFT) pro C
+Des:
<!-- DT:Rich -->
<p>FFTW je knihovna c subrutin pro výpočet jedno nebo více prostorové
diskrétní fourierovi transformace (DFT) nad reálnými i komplexními čísly.
</p>
-Des:
##----------------------------------------
=Pkg: file-32bit 4.24 43.19.1 x86_64
=Sum: Program pro určení typu souboru
+Del:
<!-- DT:Rich -->
<p>Tento balíček je vyžadován pro lpdfilter.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Program &quot;file&quot; vypisuje informace o typu (formátu) zadaných souborů.
Rozpoznávání typu souborů se řídí klasifikačními kritérii uvedenými
v souboru /etc/magic. Příkaz file je používán programem apsfilter pro
automatický tisk různých druhů souborů.
</p>
-Des:
##----------------------------------------
=Pkg: file 4.24 43.19.1 x86_64
=Sum: Program pro určení typu souboru
+Del:
<!-- DT:Rich -->
<p>Tento balíček je vyžadován pro lpdfilter.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Program &quot;file&quot; vypisuje informace o typu (formátu) zadaných souborů.
Rozpoznávání typu souborů se řídí klasifikačními kritérii uvedenými
v souboru /etc/magic. Příkaz file je používán programem apsfilter pro
automatický tisk různých druhů souborů.
</p>
-Des:
##----------------------------------------
=Pkg: file-roller 2.28.2 0.1.147 x86_64
=Sum: Správce archivů pro GNOME
+Des:
<!-- DT:Rich -->
<p>File Roller je správce archívů pro grafické prostředí GNOME.
To znamená, že dokáže vytvářet a upravovat archivy, zobrazovat
jejich obsah i jednotlivé soubory, které také mohou být jednotlivě
do archívu přidávány nebo z něj i odebírány. File Roller je nadstavba
pro programy jako tar a zip. Podporované formáty jsou:
<ul>
<li>Tar archivy bez komprese (.tar) nebo s kompresí pomocí:
</li><li>gzip (.tar.gz , .tgz)
</li><li>bzip (.tar.bz , .tbz)
</li><li>bzip2 (.tar.bz2 , .tbz2)
</li><li>compress (.tar.Z , .taz)
</li><li>lzop (.tar.lzo , .tzo)
</li><li>Zip archivy (.zip)
</li><li>Jar archivy (.jar , .ear , .war)
</li><li>Lha archivy (.lzh)
</li><li>Rar archivy (.rar)
</li><li>Jednotlivé soubory gzip, bzip, bzip2, compress, lzop.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: file-roller-lang 2.28.2 0.1.147 x86_64
=Sum: Správce archivů pro GNOME
+Des:
<!-- DT:Rich -->
<p>File Roller je správce archívů pro grafické prostředí GNOME.
To znamená, že dokáže vytvářet a upravovat archivy, zobrazovat
jejich obsah i jednotlivé soubory, které také mohou být jednotlivě
do archívu přidávány nebo z něj i odebírány. File Roller je nadstavba
pro programy jako tar a zip. Podporované formáty jsou:
<ul>
<li>Tar archivy bez komprese (.tar) nebo s kompresí pomocí:
</li><li>gzip (.tar.gz , .tgz)
</li><li>bzip (.tar.bz , .tbz)
</li><li>bzip2 (.tar.bz2 , .tbz2)
</li><li>compress (.tar.Z , .taz)
</li><li>lzop (.tar.lzo , .tzo)
</li><li>Zip archivy (.zip)
</li><li>Jar archivy (.jar , .ear , .war)
</li><li>Lha archivy (.lzh)
</li><li>Rar archivy (.rar)
</li><li>Jednotlivé soubory gzip, bzip, bzip2, compress, lzop.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: fileshareset 2.0 20.31 x86_64
=Sum: Nastavuje a vypisuje sdílení souborů
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje nástroj fileshareset pro nastavení nebo odebrání
sdílení souborů uživateli. Je také možné vypsat právě sdílená umístění.
/etc/security/fileshare.conf je hlavním konfiguračním souborem.
</p>
-Des:
##----------------------------------------
=Pkg: filesystem 11.1 3.5.3 x86_64
=Sum: Základní adresářová struktura
+Des:
<!-- DT:Rich -->
<p>Tento balíček instaluje adresářovou strukturu. Obsahuje i domovské
adresáře systémových uživatelů.
</p>
-Des:
##----------------------------------------
=Pkg: fillup 1.42 242.21 x86_64
=Sum: Nástroj pro slučování konfiguračních souborů
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správnou funkci a správu vašeho
systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Program &#39;fillup&#39; slučuje soubory obsahující proměnné
(např. konfiguraci nebo proměnné prostředí). Proměnná je definována
entitou složenou z komentáře, názvu proměnné, oddělovače přiřazení
a související hodnotou proměnné. Proměnná je určena svým názvem.
</p>
-Des:
##----------------------------------------
=Pkg: filters 2007.8.9 186.31 x86_64
=Sum: Printer Drivers (Filters) for a few GDI Printer Models
+Des:
<!-- DT:Rich -->
<p>This package includes several converters for
a few so called GDI printer models, see
http://en.opensuse.org/SDB:GDI_Printers
for general information about &quot;GDI printers&quot;.
</p><p>
pnm, ppm, pbm, pgm to PPA (HP Printing Performance Architecture)
supports HP 720 Series(710C,720C,722C), HP 820 series
(820Cse, 820Cxi) and HP 1000 series (1000Cse, 1000Cxi)
</p><p>
bitcmyk to Lexmark Z11 and Lexmark lex2070
</p><p>
PCL to CaPSL (Canon Laser, see gs devices lbp8 and lips3)
</p><p>
ppmraw to Lexmark 1100
</p><p>
bitcmyk to Apple StyleWriter
</p><p>
pbmraw to Lexmark 2030
</p><p>
ppmraw  to Citizen Printiva
</p><p>
For more information see the docs in /usr/share/doc/packages/filters
</p>
-Des:
##----------------------------------------
=Pkg: finch 2.6.6 0.11.1 x86_64
=Sum: Text-Based User Interface for Pidgin Instant Messaging Client
+Des:
<!-- DT:Rich -->
<p>A text-based user interface for using libpurple.  This can be run from a
standard text console or from a terminal within X Windows.  It
uses ncurses and our homegrown gnt library for drawing windows
and text.
</p>
-Des:
##----------------------------------------
=Pkg: findutils 4.4.0 38.26.1 x86_64
=Sum: GNU find - vyhledávání souborů
+Des:
<!-- DT:Rich -->
<p>This package contains GNU find and xargs.  The programs comply with POSIX 1003.2.  They also support additional options, some borrowed from Unix and some unique to GNU.
</p>
-Des:
##----------------------------------------
=Pkg: findutils-locate 4.4.0 38.26.1 x86_64
=Sum: Nástroj pro vyhledávání souborů (součást GNU findutils)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje program locate, který je součástí GNU findutils.
</p><p>
Pomocí locate můžete rychle vyhledávat soubory. Pokud nainstalujete
balíček findutils-locate, přidá se do systému cronu další úloha,
která každou noc, nebo krátce po zapnutí počítače, aktualizuje
databázi souborů.
</p>
-Des:
##----------------------------------------
=Pkg: finger 1.3 104.22 x86_64
=Sum: Zobrazuje informace o uživateli (klient)
+Des:
<!-- DT:Rich -->
<p>Příkaz finger zobrazuje informace o systémovém uživateli (přihlašovací
jméno, domovský adresář, jméno, ...) a to lokální i vzdálené.
</p>
-Des:
##----------------------------------------
=Pkg: flash-player 11.1.102.55 0.13.1 x86_64
=Sum: Adobe Flash PlugIn and standalone Player
+Des:
<!-- DT:Rich -->
<p>This package contains Adobe&#39;s Flash Plugin for the supported Web browsers in addition to a standalone flash player application.
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<pre width="72"><small><tt>ADOBE SYSTEMS INCORPORATED

Personal Computer Software License Agreement

1. WARRANTY DISCLAIMER, BINDING AGREEMENT AND ADDITIONAL TERMS AND
AGREEMENTS.

1.1 WARRANTY DISCLAIMER. THE SOFTWARE AND OTHER INFORMATION IS
DELIVERED TO YOU AS IS AND WITH ALL FAULTS. ADOBE, ITS SUPPLIERS AND
CERTIFICATION AUTHORITIES DO NOT AND CANNOT WARRANT THE PERFORMANCE
OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE, CERTIFICATE AUTHORITY
SERVICES OR OTHER THIRD PARTY OFFERINGS. EXCEPT TO THE EXTENT ANY
WARRANTY, CONDITION, REPRESENTATION OR TERM CANNOT OR MAY NOT BE
EXCLUDED OR LIMITED BY LAW APPLICABLE TO YOU IN YOUR JURISDICTION,
ADOBE AND ITS SUPPLIERS AND CERTIFICATION AUTHORITIES MAKE NO
WARRANTIES CONDITIONS, REPRESENTATIONS, OR TERMS (EXPRESS OR IMPLIED
WHETHER BY STATUTE, COMMON LAW, CUSTOM, USAGE OR OTHERWISE) AS TO ANY
MATTER INCLUDING WITHOUT LIMITATION NONINFRINGEMENT OF THIRD PARTY
RIGHTS, MERCHANTABILITY, INTEGRATION, SATISFACTORY QUALITY, OR FITNESS
FOR ANY PARTICULAR PURPOSE. THE PROVISIONS OF SECTIONS 1.1 AND 10 SHALL
SURVIVE THE TERMINATION OF THIS AGREEMENT, HOWSOEVER CAUSED, BUT THIS
SHALL NOT IMPLY OR CREATE ANY CONTINUED RIGHT TO USE THE SOFTWARE AFTER
TERMINATION OF THIS AGREEMENT.

1.2 BINDING AGREEMENT: By using, copying or distributing all or any portion of the Adobe
Software, you accept all the terms and conditions of this agreement, including, in particular, the
provisions on:

- Use (Section 3);
- Transferability (Section 5);
- Connectivity and Privacy (Section 7), including:
- Updating,
- Local Storage,
- Settings Manager,
- Peer Assisted Networking Technology,
- Content Protection Technology, and
- Use of Adobe Online Services;
- Warranty Disclaimer (Section 1.1), and;
- Liability Limitations (Sections 10 and 17).

Upon acceptance, this agreement is enforceable against you and any entity that obtained the
Software and on whose behalf it is used. If you do not agree, do not Use the Software.

1.3
http://www.adobe.com/go/thirdparty. Such
other terms and conditions will supersede all or portions of this agreement in the event of a
conflict with the terms and conditions of this agreement.
ADDITIONAL TERMS AND AGREEMENTS. Adobe permits you to Use the Software only
in accordance with the terms of this agreement. Use of some third party materials included in the
Software may be subject to other terms and conditions typically found in a separate license
agreement, a Read Me file located near such materials or in the Third Party Software Notices
and/or Additional Terms and Conditions found at

2. Definitions.

Adobe means Adobe Systems Incorporated, a Delaware corporation, 345 Park Avenue, San Jose,
California 95110, if subsection 12(a) of this agreement applies; otherwise it means Adobe Systems
Software Ireland Limited, 4-6 Riverwalk, Citywest Business Campus, Dublin 24, Ireland, a company
organized under the laws of Ireland and an affiliate and licensee of Adobe Systems Incorporated.

Compatible Computer means a Computer that conforms to the system requirements of the Software
as specified in the Documentation.

Computer means a virtual machine or physical personal electronic device that accepts information in
digital or similar form and manipulates it for a specific result based on a sequence of instructions.

Personal Computer or PC shall mean a hardware product which is designed and marketed with
the primary purpose of operating a wide variety of productivity, entertainment, and other software
applications provided by unrelated third party software vendors, which operates depending upon the
use of a full function and full feature set computer operating system of the type(s) then in widespread
use with hardware to operate general purpose laptop, desktop, server and large format tablet
microprocessor based computers. This definition of Personal Computer shall exclude hardware
products that are designed and/or marketed to have as their primary purpose any number of the
following: television, television receiver, portable media player, audio/video receiver, radio, audio
headphone, audio speaker, personal digital assistant (PDA), telephone or similar telephony based
device, game console, personal video recorder (PVR), player for digital versatile disc (DVD) or
other optical media, video camera, still camera, camcorder, video editing and format conversion
device, video image projection device, and shall further exclude any similar type of consumer,
professional or industrial device.

Software means (a) all of the contents of the files (delivered electronically or on physical media), or
disk(s) or other media with which this agreement is provided, which may include (i) Adobe or third
party computer information or software, including Adobe ReaderŽ (Adobe Reader), AdobeŽ AIRŽ
(Adobe AIR), Adobe FlashŽ Player, ShockwaveŽ Player and AuthorwareŽ Player (collectively,
Adobe AIR and the Flash, Shockwave and Authorware players are the Adobe Runtimes); (ii) related
explanatory written materials or files (Documentation); and (iii) fonts; and (b) upgrades, modified
versions, updates, additions, and copies of the foregoing, provided to you by Adobe at any time
(collectively, Updates).

Use means to access, install, download, copy, or otherwise benefit from using the functionality of the
Software.

3. Software License.

If you obtained the Software from Adobe or one of its authorized licensees, and subject to your
compliance with the terms of this agreement, including the restrictions in Section 4, Adobe grants to
you a non-exclusive license to Use the Software in the manner and for the purposes described in the
Documentation as follows:

3.1 General Use. You may install and Use one copy of the Software on your Compatible
Computer. See Section 4 for important restrictions on the Use of the Software.

3.2 Server Use. This agreement does not permit you to install or Use the Software on a
computer file server. For information on Use of Software on a computer file server please
refer to http://www.adobe.com/go/acrobat_distribute for information about Adobe Reader;
or http://www.adobe.com/go/licensing for information about the Adobe Runtimes.

3.3 Distribution. This license does not grant you the right to sublicense or distribute the
Software. For information about obtaining the right to distribute the Software on tangible
media or through an internal network or with your product or service please refer
to http://www.adobe.com/go/acrobat_distribute for information about Adobe Reader;
or http://www.adobe.com/go/licensing for information about the Adobe Runtimes.

3.4 Backup Copy. You may make one backup copy of the Software, provided your backup
copy is not installed or used other than for archival purposes. You may not transfer the rights to
a backup copy unless you transfer all rights in the Software as provided under Section 5.

4. Obligations and Restrictions.

4.1 Adobe Runtime Restrictions. You will not Use any Adobe Runtime on any non-PC device or
with any embedded or device version of any operating system. For the avoidance of doubt, and by
example only, you may not Use an Adobe Runtime on any (a) mobile device, set top box (STB),
handheld, phone, game console, TV, DVD player, media center (other than with Windows XP
Media Center Edition and its successors), electronic billboard or other digital signage, Internet
appliance or other Internet-connected device, PDA, medical device, ATM, telematic device, gaming
machine, home automation system, kiosk, remote control device, or any other consumer electronics
device, (b) operator-based mobile, cable, satellite, or television system or (c) other closed system
device. No right or license to Use any Adobe Runtime is granted for such prohibited uses.
For information on Software license terms for non-PC versions of Adobe Runtimes please
visit 

4.1.1 AVC Video Restrictions. The Software may contain h.264/AVC video technology, the use of
which requires the following notice from MPEG-LA, L.L.C.:

THIS SOFTWARE IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO
IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/OR (II) DECODE AVC
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE http://www.mpegla.com.

4.2 Adobe Flash Player Restrictions. You will not use Adobe Flash Player with any application or
device that circumvents technological measures for the protection of video, audio, and/or data content,
including any of Adobes secure RTMP measures. No right or license to use Adobe Flash Player is
granted for such prohibited uses.

4.3 Adobe Reader Restrictions.

4.3.1 Conversion Restrictions. You will not integrate or use Adobe Reader with any other software,
plug-in or enhancement that uses or relies upon Adobe Reader when converting or transforming PDF
files into a different format (e.g., a PDF file into a TIFF, JPEG, or SVG file).

4.3.2 Plug-in Restrictions. You will not integrate or use Adobe Reader with any plug-in software not
developed in accordance with the Adobe Integration Key License Agreement, more information can
be found at http://www.adobe.com/devnet/reader/ikla.html.

4.3.3 Disabled Features. Adobe Reader may contain features or functionalities that are hidden or appear
disabled or grayed out (the Disabled Features). Disabled Features will activate only when opening
a PDF document that was created using enabling technology available only from Adobe. You will
not access, or attempt to access, any Disabled Features other than through the use of such enabling
technologies, nor will you rely on Adobe Reader to create a feature substantially similar to any
Disabled Feature or otherwise circumvent the technology that controls activation of any such feature.
For more information on disabled features, please refer to http://www.adobe.com/go/readerextensions.

4.4 Notices. You shall not alter or remove any copyright or other proprietary notice that appears on or
in the Software.

4.5 No Modification or Reverse Engineering. You shall not modify, adapt, translate or create derivative
works based upon the Software. You shall not reverse engineer, decompile, disassemble, or otherwise
attempt to discover the source code of the Software. If you are located in the European Union, please
refer to the additional terms at the end of this agreement under the header European Union
Provisions, in Section 16.

5. Transfer.

You may not rent, lease, sublicense, assign, or transfer your rights in the Software, or authorize all or
any portion of the Software to be copied onto another users Computer except as may be expressly
permitted by this agreement. You may, however, transfer all your rights to Use the Software to another
person or legal entity provided that: (a) you also transfer (i) this agreement, and (ii) the Software
and all other software or hardware bundled or pre-installed with the Software, including all copies,
Updates, and prior versions, to such person or entity, (b) you retain no copies, including backups
and copies stored on a Computer, and (c) the receiving party accepts the terms and conditions of this
agreement and any other terms and conditions upon which you obtained a valid license to the Software.


Notwithstanding the foregoing, you may not transfer education, pre-release, or not for resale copies of
the Software.

6. Intellectual Property Ownership, Reservation of Rights.

The Software and any authorized copies that you make are the intellectual property of Adobe and its
suppliers. The structure, organization and code of the Software are the valuable intellectually property
(e.g. trade secrets and confidential information) of Adobe and its suppliers. The Software is protected
by law, including without limitation the copyright laws of the United States and other countries, and by
international treaty provisions. Except as expressly stated herein, this agreement does not grant you any
intellectual property rights in the Software and all rights not expressly granted are reserved by Adobe
and its suppliers.

7. Connectivity and Privacy. You acknowledge and agree to the following:

7.1 Use of PDF Files. When you Use the Software to open a PDF file that has been enabled to display
ads, your Computer may connect to a website operated by Adobe, an advertiser, or other third party.
Your Internet Protocol address (IP Address) is sent when this happens. The party hosting the site may
use technology to send (or serve) advertising or other electronic content that appears in or near the
opened PDF file. The website operator may also use JavaScript, web beacons (also known as action tags
or single-pixel gifs), and other technologies to increase and measure the effectiveness of advertisements
and to personalize advertising content. Your communication with Adobe websites is governed by the
Adobe Online Privacy Policy found at http://www.adobe.com/go/privacy (Adobe Online Privacy
Policy). Adobe may not have access to or control over features that a third party may use, and the
information practices of third party websites are not covered by the Adobe Online Privacy Policy.

7.2 Updating. If your Computer is connected to the Internet, the Software may, without
additional notice, check for Updates that are available for automatic download and
installation to your Computer and let Adobe know the Software is successfully installed.
For Reader, Updates may be automatically downloaded but not installed without additional
notice unless you change your preferences to accept automatic installation. Only non-personally
identifying information is transmitted to Adobe when this happens, except to the extent that
IP Addresses may be considered personally identifiable in some jurisdictions. The use of
such information, including your IP Address, as provided by the auto update process is
governed by the Adobe Online Privacy Policy. Please consult the Documentation for information
about changing default update settings, or online
at for Flash
Player, http://acrobatsupport.com/turning-off-the-acrobat-updater (or successor
website) for Reader, and http://kb2.adobe.com/cps/403/kb403175.html
and http://airdownload.adobe.com/air/applications/SettingsManager/SettingsManager.air for
Adobe AIR.
http://www.adobe.com/go/settingsmanager

7.3 Local Storage. Flash Player and Adobe AIR may allow third parties to store certain
information on your Computer in a local data file known as a local shared object. The type
and amount of information that the third party application requests to be stored in a local shared
object can vary by application and such requests are solely controlled by the third party. You can
find more information on local shared objects at http://www.adobe.com/go/flashplayer_security.
For more information on how to limit or control the storage of local shared objects on your Computer,
please visit http://www.adobe.com/go/settmgr_storage_en.

7.4 Settings Manager. Flash Player and Adobe AIR may cause certain user settings to be stored on
your Computer as a local shared object. These settings are associated with the instance of Flash Player
or Adobe AIR on your Computer, but do not contain personally identifiable information associated
with you, and allow you to configure certain settings within the Flash Player including the ability
to limit third parties from storing local shared objects. You can find more information on how
to configure your version of Flash Player or Adobe AIR, including how to disable local shared
objects in the Settings Manager for Flash Player, at http://www.adobe.com/go/settingsmanager,
or http://airdownload.adobe.com/air/applications/SettingsManager/SettingsManager.air for Adobe AIR.


7.5 Peer Assisted Networking Technology. Adobe Flash Player and Adobe AIR runtimes provide the
ability for applications built by third parties to connect to an Adobe Server or Service and permit direct
communication between two Adobe Runtime clients or to connect an Adobe Runtime client as part of a
peer or distributed network that allows a portion of your resources, such as network bandwidth, to be
made directly available to other participants. Prior to joining such peer or distributed network, you will
be provided with the opportunity to accept such connectivity. To manage Peer Assisted Networking
settings, please go to the Settings Manager at http://www.adobe.com/go/settmgr_networking_en.
You can find more information on Peer Assisted Networking at http://www.adobe.com/go/RTMFP.

7.6 Content Protection Technology. If you Use the Adobe Runtimes to access content that has been
protected with Adobe Flash Media Rights Management Server or Flash Access software (Content
Protection), in order to let you play the protected content, the Software may automatically request
media usage rights and individualization rights from a rights server on the Internet, and may download
and install required components of the Software, including any available Content Protection Updates.
You can find more information on Content Protection at http://www.adobe.com/go/protected_content.

7.7 Use of Adobe Online Services. If your Computer is connected to the Internet, the Software may,
without additional notice and on an intermittent or regular basis, facilitate your access to content and
services that are hosted on websites maintained by Adobe or its affiliates (Adobe Online Services).
Examples of such Adobe Online Services might include, but are not limited to: Acrobat.com. In some
cases an Adobe Online Service might appear as a feature or extension within the Software even though
it is hosted on a website. In some cases, access to an Adobe Online Service might require a separate
subscription or other fee in order to access it, and/or your assent to additional terms of use. Adobe
Online Services might not be available in all languages or to residents of all countries and Adobe may,
at any time and for any reason, modify or discontinue the availability of any Adobe Online Service.
Adobe also reserves the right to begin charging a fee for access to or use of an Adobe Online Service
that was previously offered at no charge. If your Computer is connected to the Internet, the Software
may, without additional notice, update downloadable materials from these Adobe Online Services so as
to provide immediate availability of these Adobe Online Services even when you are offline. When the
Software connects to the Internet, no personally identifiable information is sent except to the extent that
IP Addresses may be considered personally identifiable in some jurisdictions. Notwithstanding the
foregoing, if you sign on to Acrobat.com your user name and password may be sent to Adobes
servers and stored by Adobe in accordance with the Acrobat.com Additional Terms of Use.
Whenever the Software makes an Internet connection and communicates with an Adobe website,
whether automatically or due to explicit user request, the Adobe Online Privacy Policy shall apply.
Additionally, unless you are provided with separate terms of use at that time, the Adobe.com Terms of
Use (http://www.adobe.com/go/terms) shall apply. Please note that the Adobe Privacy Policy allows
tracking of website visits and it addresses in detail the topic of tracking and use of cookies, web
beacons and similar devices.

8. Third Party Offerings. You acknowledge and agree to the following:

8.1 Third Party Offerings. The Software may allow you to access and interoperate with third party
content, software applications, and data services, including rich Internet applications (Third Party
Offerings). Your access to and use of any Third Party Offering, including any goods, services, or
information, is governed by the terms and conditions respecting such offerings and copyright laws of
the United States and other countries. Third Party Offerings are not owned or provided by Adobe.
You agree that you will not use any of such Third Party Offerings in violation of copyright laws of
the United States or other countries. Adobe or the third party may at any time, for any reason, modify
or discontinue the availability of any Third Party Offerings. Adobe does not control, endorse or accept
responsibility for Third Party Offerings. Any dealings between you and any third party in connection
with a Third Party Offerings, including such partys privacy policies and use of your personal
information, delivery of and payment for goods and services and any other terms, conditions,
warranties or representations associated with such dealings, are solely between you and such third
party. Third Party Offerings might not be available in all languages or to residents of all countries and
Adobe or the third party may, at any time and for any reason, modify or discontinue the availability of
any Third Party Offerings.


8.2 EXCEPT AS EXPRESSLY AGREED BY ADOBE OR ITS AFFILIATES OR A THIRD PARTY
IN A SEPARATE AGREEMENT, YOUR USE OF ADOBE AND THIRD PARTY OFFERINGS IS
AT YOUR OWN RISK UNDER THE WARRANTY AND LIABILITY LIMITATIONS OF
SECTIONS 1.1 AND 10.

9. Digital Certificates. You acknowledge and agree to the following:

9.1 Use. Adobe AIR uses digital certificates to help you identify the publisher of Adobe AIR applications
created by third parties. Additionally, Adobe AIR uses digital certificates to establish the identity of
servers accessed via the Transport Layer Security (TLS) protocol, including access via HTTPS. Adobe
Reader uses digital certificates to sign and validate signatures within PDF documents and to validate
certified PDF documents. Adobe Runtimes use digital certificates to secure protected content from
unauthorized usage. Your Computer may connect to the Internet at the time of validation of a digital
certificate in order to download current certificate revocation lists (CRLs) or to update the list of digital
certificates. This access may be made both by the Software and by applications based on the Software.
Digital certificates are issued by third party certificate authorities, including Adobe Certified Document
Services (CDS) vendors listed at http://www.adobe.com/go/partners_cds and Adobe Approved Trust List
(AATL) vendors listed at http://www.adobe.com/security/approved-trust-list.html, and individualization
vendors found at http://www.adobe.com/go/protected_content (collectively Certification Authorities),
or can be self-signed.

9.2 Terms and Conditions. Purchase, use and reliance upon digital certificates are the responsibility of
you and a Certification Authority. Before you rely upon any certified document, digital signature or
Certification Authority services, you should review the applicable terms and conditions under which
the relevant Certification Authority provides services, including, for example, any subscriber
agreements, relying party agreements, certificate policies and practice statements. See the links
on http://www.adobe.com/go/partners_cds for information about Adobes CDS vendors
and http://www.adobe.com/security/approved-trust-list.html for information about Adobes AATL
vendors.

9.3 Acknowledgement. You agree that (a) a digital certificate may have been revoked prior to the time
of verification, making the digital signature or certificate appear valid when in fact it is not, (b) the
security or integrity of a digital certificate may be compromised due to an act or omission by the signer
of the document, the applicable Certification Authority, or any other third party, and (c) a certificate
may be a self-signed certificate not provided by a Certification Authority. YOU ARE SOLELY
RESPONSIBLE FOR DECIDING WHETHER OR NOT TO RELY ON A CERTIFICATE. UNLESS
A SEPARATE WRITTEN WARRANTY IS PROVIDED TO YOU BY A CERTIFICATION
AUTHORITY, YOU USE DIGITAL CERTIFICATES AT YOUR SOLE RISK.

9.4 Third Party Beneficiaries. You agree that any Certification Authority you rely upon is a third party
beneficiary of this agreement and shall have the right to enforce this agreement in its own name as if it
were Adobe.

9.5 Indemnity. You agree to hold Adobe and any applicable Certification Authority (except as
expressly provided in its terms and conditions) harmless from any and all liabilities, losses, actions,
damages, or claims (including all reasonable expenses, costs, and attorneys fees) arising out of or
relating to any use of, or reliance on, any service of such authority, including, without limitation
(a) reliance on an expired or revoked certificate, (b) improper verification of a certificate, (c) use of a
certificate other than as permitted by any applicable terms and conditions, this agreement or applicable
law; (d) failure to exercise reasonable judgment under the circumstances in relying on issuer services or
certificates or (e) failure to perform any of the obligations as required in the terms and conditions
related to the services.

10. Limitation of Liability.

IN NO EVENT WILL ADOBE, ITS SUPPLIERS, OR CERTIFICATION AUTHORITIES BE
LIABLE TO YOU FOR ANY DAMAGES, CLAIMS OR COSTS WHATSOEVER INCLUDING
ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL DAMAGES, OR ANY LOST PROFITS OR
LOST SAVINGS, EVEN IF AN ADOBE REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH LOSS, DAMAGES, OR CLAIMS. THE FOREGOING LIMITATIONS
AND EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN YOUR
JURISDICTION. ADOBES AGGREGATE LIABILITY AND THAT OF ITS SUPPLIERS AND
CERTIFICATION AUTHORITIES UNDER OR IN CONNECTION WITH THIS AGREEMENT
SHALL BE LIMITED TO THE AMOUNT PAID FOR THE SOFTWARE, IF ANY. Nothing
contained in this agreement limits Adobes liability to you in the event of death or personal injury
resulting from Adobes negligence or for the tort of deceit (fraud). Adobe is acting on behalf of its
suppliers and Certification Authorities for the purpose of disclaiming, excluding and/or limiting
obligations, warranties and liability as provided in this agreement, but in no other respects and for no
other purpose. For further information, please see the jurisdiction specific information at the end of this
agreement, if any, or contact Adobes Customer Support Department.

11. Export Rules.

You agree that the Software will not be shipped, transferred, or exported into any country or used in
any manner prohibited by the United States Export Administration Act or any other export laws,
restrictions or regulations (collectively the Export Laws). In addition, if the Software is identified as
export controlled items under the Export Laws, you represent and warrant that you are not a citizen, or
otherwise located within, an embargoed nation (including without limitation Iran, Syria, Sudan, Cuba,
and North Korea) and that you are not otherwise prohibited under the Export Laws from receiving the
Software. All rights to Use the Software are granted on condition that such rights are forfeited if you
fail to comply with the terms of this agreement.

12. Governing Law.

This agreement will be governed by and construed in accordance with the substantive laws in force:
(a) in the State of California, if a license to the Software is obtained when you are in the United States,
Canada, or Mexico; or (b) in Japan, if a license to the Software is obtained when you are in Japan,
China, Korea, or other Southeast Asian country where all official languages are written in either an
ideographic script (e.g., Hanzi, Kanji, or Hanja), and/or other script based upon or similar in structure
to an ideographic script, such as Hangul or Kana; or (c) in England, if a license to the Software is
obtained when you are in any other jurisdiction not described above. The respective courts of Santa
Clara County, California when California law applies, Tokyo District Court in Japan, when Japanese
law applies, and the competent courts of England, when the law of England applies, shall each have
non-exclusive jurisdiction over all disputes relating to this agreement. This agreement will not be
governed by the conflict of law rules of any jurisdiction or the United Nations Convention on Contracts
for the International Sale of Goods, the application of which is expressly excluded.

13. General Provisions.

If any part of this agreement is found void and unenforceable, it will not affect the validity of the
balance of this agreement, which shall remain valid and enforceable according to its terms. This
agreement shall not prejudice the statutory rights of any party dealing as a consumer. This agreement
may only be modified by a writing signed by an authorized officer of Adobe. Updates may be licensed
to you by Adobe with additional or different terms. This is the entire agreement between Adobe and
you relating to the Software and it supersedes any prior representations, discussions, undertakings,
communications, or advertising relating to the Software.

14. Notice to U.S. Government End Users.

For U.S. Government End Users, Adobe agrees to comply with all applicable equal opportunity laws
including, if appropriate, the provisions of Executive Order 11246, as amended, Section 402 of the
Vietnam Era Veterans Readjustment Assistance Act of 1974 (38 USC 4212), and Section 503 of the
Rehabilitation Act of 1973, as amended, and the regulations at 41 CFR Parts 60-1 through 60-60,
60-250, and 60-741. The affirmative action clause and regulations contained in the preceding sentence
shall be incorporated by reference in this agreement.

15. Compliance with Licenses.

If you are a business or organization, you agree that upon request from Adobe or Adobes authorized
representative, you will, within thirty (30) days, fully document and certify that use of any and all
Software at the time of the request is in conformity with your valid licenses from Adobe.

16. European Union Provisions.

Nothing included in this agreement (including Section 4.5) shall limit any non-waivable right to
decompile the Software that you may enjoy under mandatory law. For example, if you are located in
the European Union (EU), you may have the right upon certain conditions specified in the applicable
law to decompile the Software if it is necessary to do so in order to achieve interoperability of the
Software with another software program, and you have first asked Adobe in writing to provide the
information necessary to achieve such interoperability and Adobe has not made such information
available. In addition, such decompilation may only be done by you or someone else entitled to use a
copy of the Software on your behalf. Adobe has the right to impose reasonable conditions before
providing such information. Any information supplied by Adobe or obtained by you, as permitted
hereunder, may only be used by you for the purpose described herein and may not be disclosed to any
third party or used to create any software which is substantially similar to the expression of the
Software or used for any other act which infringes Adobe or its licensors copyright.

17. Specific Provisions and Exceptions.

17.1 Limitation of Liability for Users Residing in Germany and Austria.

17.1.1 If you obtained the Software in Germany or Austria, and you usually reside in such country,
then Section 10 does not apply. Instead, subject to the provisions in Section 17.1.2, Adobes statutory
liability for damages shall be limited as follows: (a) Adobe shall be liable only up to the amount of
damages as typically foreseeable at the time of entering into the license agreement in respect of
damages caused by a slightly negligent breach of a material contractual obligation and (b) Adobe shall
not be liable for damages caused by a slightly negligent breach of a non-material contractual
obligation.

17.1.2 The aforesaid limitation of liability shall not apply to any mandatory statutory liability, in
particular, to liability under the German Product Liability Act, liability for assuming a specific
guarantee or liability for culpably caused personal injuries.

17.1.3 You are required to take all reasonable measures to avoid and reduce damages, in particular to
make back-up copies of the Software and your computer data subject to the provisions of this
agreement.

If you have any questions regarding this agreement, or if you wish to request any information from
Adobe, please use the address and contact information included with this product or via the web
at http://www.adobe.com to contact the Adobe office serving your jurisdiction.

Adobe, Adobe AIR, AIR, Authorware, Flash, Reader, and Shockwave are either registered trademarks
or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

PlatformClients_PC_WWEULA-en_US-20100108_1657

</tt></small></pre><p></p>
-Eul:
##----------------------------------------
=Pkg: fltk 1.1.9 1.16 x86_64
=Sum: Free C++ GUI Toolkit for the X Window System, OpenGL, and WIN32
+Des:
<!-- DT:Rich -->
<p>Fast Light Tool Kit (&quot;FLTK&quot;, čti &quot;fultyk&quot;) je grafický toolkit pro C++
pro prostředí X (Unix(r)), OpenGL(r) a Microsoft(r) Windows(r) NT 4.0,
95 nebo 98.
Pro používání tohoto balíčku musíte mít nainstalovanou 3D knihovnu.
Pokud nemáte 3D grafickou kartu, můžete použít softwarovou OpenGL
knihovnu z balíčku mesasoft (série x3d). Knihovnu lze také přeložit
bez 3D podpory.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig 2.6.0 10.6 x86_64
=Sum: Knihovna pro konfiguraci fontů
+Des:
<!-- DT:Rich -->
<p>Fontconfig is a library for configuring and customizing font access. It contains two essential modules: the configuration module, which builds an internal configuration from XML files, and the matching module, which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig-32bit 2.6.0 10.6 x86_64
=Sum: Knihovna pro konfiguraci fontů
+Des:
<!-- DT:Rich -->
<p>Fontconfig is a library for configuring and customizing font access. It contains two essential modules: the configuration module, which builds an internal configuration from XML files, and the matching module, which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig-devel 2.6.0 10.6 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p>This package countains all include files, libraries, configuration files needed for compiling applications which use the fontconfig library.
</p><p>
In addition, it contains extensive documentation and manual pages for developers using the library.
</p><p>
Fontconfig is a library for configuring and customizing font access. It contains two essential modules, the configuration module which builds an internal configuration from XML files and the matching module which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: foomatic-filters 3.0.2 269.35.1 x86_64
=Sum: Filtrační skripty pro tiskové fronty
+Des:
<!-- DT:Rich -->
<p>Skripty pro tiskovou frontu, které filtrují příchozí PostScript
na nativní formát používaný tiskárnou podle PPD souboru.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut 080721 21.9 x86_64
=Sum: Freely licensed alternative to the GLUT library
+Des:
<!-- DT:Rich -->
<p>Freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut-32bit 080721 21.9 x86_64
=Sum: Freely licensed alternative to the GLUT library
+Des:
<!-- DT:Rich -->
<p>Freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freerdp 0.8.2 0.6.1 x86_64
=Sum: FreeRDP is a free remote desktop protocol client.
+Des:
<!-- DT:Rich -->
<p>FreeRDP implements RDP following the documentation provided under the Microsoft Open Specification Promise.FreeRDP is a fork of the rdesktop project that intends to rapidly start moving forward and implement features that rdesktop lacks the most.
</p>
-Des:
##----------------------------------------
=Pkg: freerdp-plugins 0.8.2 0.6.1 x86_64
=Sum: Plugins for handling the standard RDP channels.
+Des:
<!-- DT:Rich -->
<p>A set of plugins to the channel manager implementing the standard virtual channels including sounds, clipboard sync, disk, printer, redirection, etc.
</p>
-Des:
##----------------------------------------
=Pkg: freetype 1.3.1 1390.29 x86_64
=Sum: Knihovna pro renderování TrueType fontů
+Des:
<!-- DT:Rich -->
<p>Knihovna pro práci s TrueType fonty. Dokumentaci najdete
v adresáři /usr/share/doc/packages/freetype .
</p>
-Des:
##----------------------------------------
=Pkg: freetype-32bit 1.3.1 1390.29 x86_64
=Sum: Knihovna pro renderování TrueType fontů
+Des:
<!-- DT:Rich -->
<p>Knihovna pro práci s TrueType fonty. Dokumentaci najdete
v adresáři /usr/share/doc/packages/freetype .
</p>
-Des:
##----------------------------------------
=Pkg: freetype-tools 1.3.1 1390.29 x86_64
=Sum: Testy, dema a nástroje pro FreeType (potřebné pro CJK-LaTeX)
+Des:
<!-- DT:Rich -->
<p>Testy, dema nástroje pro FreeType. Jsou třeba pro CJK-LaTex.
</p><p>
</p><p>
FreeType Engine je volně dostupný a přenositelný TrueType engine
pro vykreslování fontů. Byl vytvořen pro rozšíření podpory TrueType
na mnoho platforem a prostředí.
</p><p>
</p><p>
Tento balík obsahuje množství programů, které jsou k FreeType Engine
připojeny z testovacích a demonstračních důvodů. Dále obsahuje některé
užitečné podpůrné programy jako ttf2pk, ttf2bdf, ttf2pfb a ttfbanner.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2 2.3.7 25.28.1 x86_64
=Sum: Knihovna pro TrueType písma
+Des:
<!-- DT:Rich -->
<p>Knihovna obsahuje TrueType fonty pro svobodné projekty.
Tato verze obsahuje i automatický hinter pro zdokonalení výstupů.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2-32bit 2.3.7 25.28.1 x86_64
=Sum: Knihovna pro TrueType písma
+Des:
<!-- DT:Rich -->
<p>Knihovna obsahuje TrueType fonty pro svobodné projekty.
Tato verze obsahuje i automatický hinter pro zdokonalení výstupů.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2-devel 2.3.7 25.28.1 x86_64
=Sum: Development environment for the freetype2 TrueType font library
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries and documentation needed to develop applications that require the freetype2 TrueType font library.
</p><p>
It also contains a small tutorial for using that library.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi 0.10.9 57.22 x86_64
=Sum: Volná implementace Unicode BiDi algoritmu
+Des:
<!-- DT:Rich -->
<p>This library implements the algorithm as described in the &quot;Unicode
Standard Annex #9, the Bidirectional Algorithm,
http://www.unicode.org/unicode/reports/tr9/&quot;. FriBidi is exhaustively tested against the Bidi Reference Code and, to the best of the developers&#39; knowledge, does notcontain any conformance bugs.
</p><p>
The API was inspired by the document &quot;Bi-Di languages support -
BiDi API proposal&quot; by Franck Portaneri, which he wrote as a proposal for
adding BiDi support to Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi-32bit 0.10.9 57.22 x86_64
=Sum: Volná implementace Unicode BiDi algoritmu
+Des:
<!-- DT:Rich -->
<p>This library implements the algorithm as described in the &quot;Unicode
Standard Annex #9, the Bidirectional Algorithm,
http://www.unicode.org/unicode/reports/tr9/&quot;. FriBidi is exhaustively tested against the Bidi Reference Code and, to the best of the developers&#39; knowledge, does notcontain any conformance bugs.
</p><p>
The API was inspired by the document &quot;Bi-Di languages support -
BiDi API proposal&quot; by Franck Portaneri, which he wrote as a proposal for
adding BiDi support to Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: ft2demos 2.3.7 25.9 x86_64
=Sum: Freetype2 nástroje a demo programy
+Des:
<!-- DT:Rich -->
<p>Freetype2 nástroje a demo programy.
</p>
-Des:
##----------------------------------------
=Pkg: fuse 2.7.2 61.23.1 x86_64
=Sum: User space File System
+Des:
<!-- DT:Rich -->
<p>With FUSE, a user space program can export a file system through the <a href="pkg://kernel-default"> Linux kernel</a>.
</p><p>
User space file systems which are implemented using FUSE are provided by the following packages:
<ul>
<li><a href="pkg://curlftpfs">curlftpfs</a> (mount FTP servers),
</li><li><a href="pkg://encfs">encfs</a> (layered file encryption),
</li><li><a href="pkg://fuseiso">fuseiso</a> (mount iso, img, bin, mdf and nrg CD-ROM images),
</li><li><a href="pkg://fusepod">fusepod</a> (mount iPods),
</li><li><a href="pkg://fusesmb">fusesmb</a> (mount a fully browseable network neighborhood),
</li><li><a href="pkg://gphotofs">gphotofs</a> (mount gphoto-supported cameras),
</li><li><a href="pkg://ntfs-3g">ntfs-3g</a> (mount NTFS volumes read-write),
</li><li><a href="pkg://obexfs">obexfs</a> (mount of bluetooth devices),
</li><li><a href="pkg://sshfs">sshfs</a> (mount over ssh),
</li><li><a href="pkg://wdfs">wdfs</a> (mount of WebDAV shares)
</li></ul>
This package contains the mount binaries for fuse (might not be needed by some FUSE filesystems like <a href="pkg://ntfs-3g">ntfs-3g</a>) and the documentation for FUSE.
</p><p>
After installing <a href="pkg://fuse-devel">fuse-devel</a>, administrators can compile and install other user space file systems which can be found at <tt>http://fuse.sourceforge.net/wiki</tt>
</p>
-Des:
##----------------------------------------
=Pkg: fxload 2008_10_13 1.19 x86_64
=Sum: Download Firmware into USB FX and FX2 Devices
+Des:
<!-- DT:Rich -->
<p>tento program umí stáhnout firmware pro FX a FX2 EZ-USB zařízení stejně jako
pro AnchorChips EZ-USB. Je navržen tak, aby při zjištění nepřipojeného
zařízení volal hotplug.
</p><p>
Použít lze také pro aktualizaci firmwaru zařízení statujících z I2C seriové EEPROM.
Pro tento účel je nutné nejdřív zavést druhý stupeň zavaděče.
</p>
-Des:
##----------------------------------------
=Pkg: g3utils 1.1.36 26.31 x86_64
=Sum: Nástroje pro grafický formát G3 (Fax)
+Des:
<!-- DT:Rich -->
<p>Tyto programy konvertují grafické soubory z formátu G3 do
víceúčelového formátu PBM, který lze tisknout a dále upravovat,
a obráceně. Formát G3 je používán faxmodemy a faxy.
</p><p>
G3utils jsou obsaženy ve zdrojovém balíčku mgetty.
</p>
-Des:
##----------------------------------------
=Pkg: gau 0.4.1 903.19 x86_64
=Sum: Korejský komunikační program pro X11
+Des:
<!-- DT:Rich -->
<p>Korejský komunikační program pro X11.
</p>
-Des:
##----------------------------------------
=Pkg: gawk 3.1.8 2.6.1 x86_64
=Sum: GNU awk
+Des:
<!-- DT:Rich -->
<p>GNU verze programu awk. Je zdola kompatibilní s programem awk ze
System V Release 4 a téměř zcela kompatibilní s POSIX 1003.2.
</p>
-Des:
##----------------------------------------
=Pkg: gcalctool 5.28.2 0.1.165 x86_64
=Sum: GNOME kalkulačka
+Des:
<!-- DT:Rich -->
<p>Balíček s GNOME kalkulačkou založenou na calctool a MP knihovně.
</p>
-Des:
##----------------------------------------
=Pkg: gcalctool-lang 5.28.2 0.1.165 x86_64
=Sum: GNOME kalkulačka
+Des:
<!-- DT:Rich -->
<p>Balíček s GNOME kalkulačkou založenou na calctool a MP knihovně.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-32bit 4.3 62.198 x86_64
=Sum: The system GNU C Compiler
+Des:
<!-- DT:Rich -->
<p>GNU překladač C.
</p>
-Des:
##----------------------------------------
=Pkg: gcc 4.3 62.198 x86_64
=Sum: The system GNU C Compiler
+Des:
<!-- DT:Rich -->
<p>GNU překladač C.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-c++ 4.3 62.198 x86_64
=Sum: The system GNU C++ Compiler
+Des:
<!-- DT:Rich -->
<p>GNU překladač C++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-gij-32bit 4.3 62.198 x86_64
=Sum: The system GNU Java bytecode interpreter
+Des:
<!-- DT:Rich -->
<p>The system GNU Java bytecode interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-gij 4.3 62.198 x86_64
=Sum: The system GNU Java bytecode interpreter
+Des:
<!-- DT:Rich -->
<p>The system GNU Java bytecode interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-info 4.3 62.198 x86_64
=Sum: The system GNU Compiler documentation
+Des:
<!-- DT:Rich -->
<p>The system GNU Compiler documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-java 4.3 62.198 x86_64
=Sum: The system GNU Java Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU Java Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-32bit 4.3.4_20091019 0.22.17 x86_64
=Sum: GNU překladač jazyka C a pomocné soubory
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language
frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and gcc-obj-c++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43 4.3.4_20091019 0.22.17 x86_64
=Sum: GNU překladač jazyka C a pomocné soubory
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language
frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and gcc-obj-c++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-c++ 4.3.4_20091019 0.22.17 x86_64
=Sum: GNU překladač C++
+Des:
<!-- DT:Rich -->
<p>GNU překladač C++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-gij-32bit 4.3.4_20091019 0.22.27 x86_64
=Sum: Java Bytecode Interpreter for gcc
+Des:
<!-- DT:Rich -->
<p>This package contains the java bytecode interpreter gij and related tools.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-gij 4.3.4_20091019 0.22.27 x86_64
=Sum: Java Bytecode Interpreter for gcc
+Des:
<!-- DT:Rich -->
<p>This package contains the java bytecode interpreter gij and related tools.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-info 4.3.4_20091019 0.22.17 x86_64
=Sum: Documentation for the GNU compiler collection
+Des:
<!-- DT:Rich -->
<p>GNU info-pages for the GNU compiler collection covering both user-level
and internals documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-java 4.3.4_20091019 0.22.27 x86_64
=Sum: GNU překladač Javy
+Des:
<!-- DT:Rich -->
<p>Překladač Javy ze sady nástrojů GCC.
</p>
-Des:
##----------------------------------------
=Pkg: gconf-editor 2.28.0 2.1.244 x86_64
=Sum: Editor pro databázový systém GCONF
+Des:
<!-- DT:Rich -->
<p>Gconf-editor umožňuje zobrazení a zpracování hodnot, které jsou
uloženy v databázi gconf. Tato databáze se používá pro nastavení
aplikací v prostředí GNOME 2.x
</p>
-Des:
##----------------------------------------
=Pkg: gconf-editor-lang 2.28.0 2.1.244 x86_64
=Sum: Editor pro databázový systém GCONF
+Des:
<!-- DT:Rich -->
<p>Gconf-editor umožňuje zobrazení a zpracování hodnot, které jsou
uloženy v databázi gconf. Tato databáze se používá pro nastavení
aplikací v prostředí GNOME 2.x
</p>
-Des:
##----------------------------------------
=Pkg: gconf-sharp2 2.24.0 14.41 x86_64
=Sum: Mono vazby pro gconf
+Des:
<!-- DT:Rich -->
<p>tento balíček obsahuje Mono vazby pro gconf a gconf editory.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2 2.28.0 1.6.10 x86_64
=Sum: Nástroj pro konfiguraci GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>GConf, the GNOME configuration database. It is used by the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-32bit 2.28.0 1.6.10 x86_64
=Sum: Nástroj pro konfiguraci GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>GConf, the GNOME configuration database. It is used by the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-lang 2.28.0 1.6.10 x86_64
=Sum: Nástroj pro konfiguraci GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>GConf, the GNOME configuration database. It is used by the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: gconfmm 2.28.0 1.1.217 x86_64
=Sum: C++ rozhraní pro GConf (součást projektu GNOME)
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje C++ rozhraní pro GConf. Je to podbalík
projektu gnomemm. Poskytuje pohodlné rozhraní pro C++
programátory používající GConf.
</p>
-Des:
##----------------------------------------
=Pkg: gd 2.0.36.RC1 52.18 x86_64
=Sum: Knihovna pro kreslení v programech, které pracují s PNG a JPEG.
+Des:
<!-- DT:Rich -->
<p>Pomocí gd můžete ve vašem kódu rychle vykreslovat v mnoha barvách obrázky
dohromady s linkami, oblouky či textem. Podporuje funkci &quot;vyjmout a vložit&quot; z jiných
obrázků a vyplňování zaplavováním. Výstup je ve formátech PNG, JPEG a WBMP
(pro bezdrátová zařízení). PHP4 podporuje gd.
</p>
-Des:
##----------------------------------------
=Pkg: gdb 7.3 0.6.1 x86_64
=Sum: GNU debugger
+Des:
<!-- DT:Rich -->
<p>You can use GDB to debug programs written in C, C++, Ada, and Modula-2. GNU Fortran 77 support is also partially included.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm 1.8.3 371.83 x86_64
=Sum: Databázové rutiny GNU
+Des:
<!-- DT:Rich -->
<p>Staticky and dynamicky linkovaná knihovna obsahující procedury pro práci
s GNU databázemi.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm-32bit 1.8.3 371.83 x86_64
=Sum: Databázové rutiny GNU
+Des:
<!-- DT:Rich -->
<p>Staticky and dynamicky linkovaná knihovna obsahující procedury pro práci
s GNU databázemi.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf 0.22.0 294.24 x86_64
=Sum: Knihovna pro rychlé manipulace s rastrovou grafikou
+Des:
<!-- DT:Rich -->
<p>S touto knihovnou můžete velmi rychle a efektivně vytvářet, měnit,
zvětšovat, zmenšovat a přemisťovat rastrová data.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf-32bit 0.22.0 294.24 x86_64
=Sum: Knihovna pro rychlé manipulace s rastrovou grafikou
+Des:
<!-- DT:Rich -->
<p>S touto knihovnou můžete velmi rychle a efektivně vytvářet, měnit,
zvětšovat, zmenšovat a přemisťovat rastrová data.
</p>
-Des:
##----------------------------------------
=Pkg: gdm 2.24.0 24.77.1 x86_64
=Sum: Správce obrazovky pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tato verze GDM (GNOME Display Manager) je založena na GTK2 a jeurčena pro GNOME 2.x. GDM je flexibilní správce oken pro X Window,který obsahuje množství funkcí, je možné ho použít pro vzdálenépřihlášení a poskytuje velmi dobře vypadající grafické rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: gdm-branding-upstream 2.24.0 24.77.1 x86_64
=Sum: Správce obrazovky pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tato verze GDM (GNOME Display Manager) je založena na GTK2 a jeurčena pro GNOME 2.x. GDM je flexibilní správce oken pro X Window,který obsahuje množství funkcí, je možné ho použít pro vzdálenépřihlášení a poskytuje velmi dobře vypadající grafické rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: gdm-lang 2.24.0 24.77.1 x86_64
=Sum: Správce obrazovky pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tato verze GDM (GNOME Display Manager) je založena na GTK2 a jeurčena pro GNOME 2.x. GDM je flexibilní správce oken pro X Window,který obsahuje množství funkcí, je možné ho použít pro vzdálenépřihlášení a poskytuje velmi dobře vypadající grafické rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: gedit 2.28.3 0.6.1 x86_64
=Sum: Editor pro prostředí GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Gedit je malý, ale rychlý editor pro GNOME 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: gedit-lang 2.28.3 0.6.1 x86_64
=Sum: Editor pro prostředí GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Gedit je malý, ale rychlý editor pro GNOME 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: gegl-0_0 0.0.20 1.35 x86_64
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: genisoimage 1.1.8 3.32.3 x86_64
=Sum: Program pro vytváření CD pod Linuxem
+Des:
<!-- DT:Rich -->
<p>Genisoimage is a pre-mastering program that generates an iso9660 filesystem. It takes a snapshot of a given directory tree, and generates a binary image which corresponds to an iso9660 filesystem that can be written to a block device.
</p>
-Des:
##----------------------------------------
=Pkg: gettext-runtime 0.17 61.40 x86_64
=Sum: Nástroje pro podporu národních jazyků (NLS)
+Des:
<!-- DT:Rich -->
<p>This package contains the intl library as well as tools that ease the creation and maintenance of message catalogs. It allows you to extract strings from source code. The supplied Emacs mode (po-mode.el) helps editing these catalogs (called PO files, for portable object) and adding translations. A special compiler turns these PO files into binary catalogs.
</p>
-Des:
##----------------------------------------
=Pkg: gettext-runtime-32bit 0.17 61.40 x86_64
=Sum: Nástroje pro podporu národních jazyků (NLS)
+Des:
<!-- DT:Rich -->
<p>This package contains the intl library as well as tools that ease the creation and maintenance of message catalogs. It allows you to extract strings from source code. The supplied Emacs mode (po-mode.el) helps editing these catalogs (called PO files, for portable object) and adding translations. A special compiler turns these PO files into binary catalogs.
</p>
-Des:
##----------------------------------------
=Pkg: gettext-tools 0.17 61.40 x86_64
=Sum: Nástroje pro podporu národních jazyků (NLS)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje `intl&#39; knihovnu a nástroje potřebné pro vytváření a údržbu katalogu zpráv.
Pomocí těchto nástrojů lze ze zdrojových textů získat textové řetězce. Dodávaný mód
pro Emacs (po-mode.el) Vám usnadní práci s úpravou těchto katalogů
(nazývaných PO soubory - portovatelné objekty) a přidáváním překladů.
Speciálním překladačem pak převedete tyto katalogy do binární formy.
</p>
-Des:
##----------------------------------------
=Pkg: gftp 2.0.18 248.31 x86_64
=Sum: Multithreaded FTP Client for X11
+Des:
<!-- DT:Rich -->
<p>gFTP je vícevláknový FTP klient pro X11 napsaný s použitím Gtk. Mezi
jeho vlastnosti patří: souběžný přenos více souborů, navázání na
přerušený přenos souboru, fronty pro přenos souborů, načítání celých
adresářů, podpora FTP proxy, kešování obsahu vzdálených adresářů,
pasivní a nepasivní přenosy souborů, podpora drag and drop, velmi
pěkný správce spojení a mnoho dalších.
</p>
-Des:
##----------------------------------------
=Pkg: gftp-lang 2.0.18 248.31 x86_64
=Sum: Multithreaded FTP Client for X11
+Des:
<!-- DT:Rich -->
<p>gFTP je vícevláknový FTP klient pro X11 napsaný s použitím Gtk. Mezi
jeho vlastnosti patří: souběžný přenos více souborů, navázání na
přerušený přenos souboru, fronty pro přenos souborů, načítání celých
adresářů, podpora FTP proxy, kešování obsahu vzdálených adresářů,
pasivní a nepasivní přenosy souborů, podpora drag and drop, velmi
pěkný správce spojení a mnoho dalších.
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot 4.1.32 0.7.11 x86_64
=Sum: Graphical Boot Logo for GRUB, LILO and SYSLINUX
+Des:
<!-- DT:Rich -->
<p>Tools to configure your bootloader graphics.
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot-branding-SLED 4.1.32 0.7.11 x86_64
=Sum: gfxboot SLED theme
+Des:
<!-- DT:Rich -->
<p>SLED theme for gfxboot (bootloader graphics).
</p>
-Des:
##----------------------------------------
=Pkg: ggz 0.0.14.1 4.16 x86_64
=Sum: The GGZ project makes free online gaming possible
+Des:
<!-- DT:Rich -->
<p>The GGZ project makes free online gaming possible.
</p>
-Des:
##----------------------------------------
=Pkg: ggz-client-libs 0.0.14.1 59.19 x86_64
=Sum: The GGZ project makes free online gaming possible
+Des:
<!-- DT:Rich -->
<p>The GGZ project makes free online gaming possible.
</p>
-Des:
##----------------------------------------
=Pkg: ggz-client-libs-lang 0.0.14.1 59.19 x86_64
=Sum: The GGZ project makes free online gaming possible
+Des:
<!-- DT:Rich -->
<p>The GGZ project makes free online gaming possible.
</p>
-Des:
##----------------------------------------
=Pkg: ghex 2.22.0 1.33 x86_64
=Sum: Binární editor pro GNOME
+Des:
<!-- DT:Rich -->
<p>GHex umožňuje nahrávat data z libovolných souborů a ty potom
upravovat v hexadecimálním nebo ASCII formátu.
</p>
-Des:
##----------------------------------------
=Pkg: ghex-lang 2.22.0 1.33 x86_64
=Sum: Binární editor pro GNOME
+Des:
<!-- DT:Rich -->
<p>GHex umožňuje nahrávat data z libovolných souborů a ty potom
upravovat v hexadecimálním nebo ASCII formátu.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-fonts-other 8.62 32.28.1 x86_64
=Sum: Volitelné fonty pro Ghostscript
+Des:
<!-- DT:Rich -->
<p>Některé užitečné fonty pro PostScript interpret Ghostscript.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-fonts-rus 8.62 32.28.1 x86_64
=Sum: Ruské fonty pro ghostscript
+Des:
<!-- DT:Rich -->
<p>Ruské fonty pro Ghostscript.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-fonts-std 8.62 32.28.1 x86_64
=Sum: Standardní fonty pro Ghostscript
+Des:
<!-- DT:Rich -->
<p>The necessary fonts for the PostScript interpreter Ghostscript.  The URW
fonts (URW Software, Poppenbuetteler Bogen 29A, D-22399 Hamburg, Germany).
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-library 8.62 32.28.1 x86_64
=Sum: Soubory nezbytné pro běh Ghostscriptu
+Des:
<!-- DT:Rich -->
<p>This package contains all start-up files for calling gs (GNU Ghostscript).
</p><p>
Find some useful documentation about a few printer drivers
in the directory:
</p><p>
/usr/share/doc/packages/ghostscript-library/doc/
</p><p>
For mor informations please read the files Use.htm and Devices.htm.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-omni 8.62 32.28.1 x86_64
=Sum: Omni Printer Drivers for Ghostscript
+Des:
<!-- DT:Rich -->
<p>The Omni printer driver provides support for over 450 printers
using the Ghostscript framework. In addition, it provides a model
for dynamically loading printer drivers, creating new devices by
editing device description files, and simplifies new printer driver
development by allowing for the subclassing of previous device features.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-x11 8.62 32.28.1 x86_64
=Sum: Ghostscript pro X Windows System
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje prohlížeč postscriptových dokumentů pro
prostředí X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: giflib-32bit 4.1.6 11.10 x86_64
=Sum: Knihovna pro práci s nekomprimovanými GIF obrázky
+Des:
<!-- DT:Rich -->
<p>This Library allows manipulatng GIF Image files.
Since the LZW patents have expired, giflib can be used instead of libungif again.
</p>
-Des:
##----------------------------------------
=Pkg: giflib 4.1.6 11.10 x86_64
=Sum: Knihovna pro práci s nekomprimovanými GIF obrázky
+Des:
<!-- DT:Rich -->
<p>This Library allows manipulatng GIF Image files.
Since the LZW patents have expired, giflib can be used instead of libungif again.
</p>
-Des:
##----------------------------------------
=Pkg: gimp 2.6.2 3.34.33.1 x86_64
=Sum: Grafický program GIMP
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-lang 2.6.2 3.34.33.1 x86_64
=Sum: Grafický program GIMP
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-plugins-python 2.6.2 3.34.33.1 x86_64
=Sum: The GNU Image Manipulation Program - python-gtk based plugins
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gio-sharp 2.22.3 12.5.166 x86_64
=Sum: .NET/C# Bindings for GIO
+Des:
<!-- DT:Rich -->
<p>C#/CLI bindings for GIO
</p>
-Des:
##----------------------------------------
=Pkg: gjiten 2.6 111.35 x86_64
=Sum: Japonský prohlížeč slovníku pro GNOME/GTK+
+Des:
<!-- DT:Rich -->
<p>Gjiten je japonský slovník pro GNOME. Používá xjdic kód a slovník
napsané Jimem Breenem. Gjiten má také kanji slovník. Při vyhledávání
kanji můžete použít jakýkoliv klíč. Vyžaduje vstupní metodu pro japonštinu,
(jako kinput2).
</p>
-Des:
##----------------------------------------
=Pkg: gkeyfile-sharp 0.2 5.5.168 x86_64
=Sum: .NET/C# Bindings for GKeyFile
+Des:
<!-- DT:Rich -->
<p>C#/CLI bindings for GKeyFile
</p>
-Des:
##----------------------------------------
=Pkg: glade-sharp2 2.12.10 22.8.109 x86_64
=Sum: Mono bindings for glade
+Des:
<!-- DT:Rich -->
<p>Mono vazby pro glade.
</p>
-Des:
##----------------------------------------
=Pkg: gle 3.1.0 65.19 x86_64
=Sum: Knihovna GLE Tubing a Extrusion
+Des:
<!-- DT:Rich -->
<p>Knihovna GLE Tubing a Extrusion je programátorským rozhraním pro grafické
aplikace. Tato knihovana nabízí množství funkcí pro jazyk C. Knihovna je ve
zdrojovém kódu, v balíku je dokumentace, návrh VRML implementace, makefiles
a celý zdrojový kód a hlavičkové soubory. Používá OpenGL(TM) knihovnu
pro vlastní grafické zobrazování objektů.
</p>
-Des:
##----------------------------------------
=Pkg: glib 1.2.10 737.23.43 x86_64
=Sum: Pomocné funkce pro Gtk
+Des:
<!-- DT:Rich -->
<p>Knihovna pomocných funkcí pro Gtk.
</p>
-Des:
##----------------------------------------
=Pkg: glib-32bit 1.2.10 737.23.43 x86_64
=Sum: Pomocné funkce pro Gtk
+Des:
<!-- DT:Rich -->
<p>Knihovna pomocných funkcí pro Gtk.
</p>
-Des:
##----------------------------------------
=Pkg: glib-sharp2 2.12.10 22.8.109 x86_64
=Sum: Mono vazby pro glib
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje Mono vazby pro glib
</p>
-Des:
##----------------------------------------
=Pkg: glib2 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-devel 2.22.5 0.2.23 x86_64
=Sum: Include files and libraries mandatory for development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries, configuration files and development tools (with manual pages) needed to compile and link applications using the glib library.
</p><p>
The glib library provides convenient functions, such as lists and
hashes, to a C programmer and is used by Gtk+ and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-lang 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glibc 2.11.3 17.31.1 x86_64
=Sum: Standardní sdílené knihovny (z GNU C knihovny)
+Del:
<!-- DT:Rich -->
<p>This package is required for proper operation and management of your Linux system.
Remove it only if you know what are you doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The GNU C Library provides the most important standard libraries used by nearly all programs: the standard C library, the standard math library, and the POSIX thread library.
A system is not functional without these libraries.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-32bit 2.11.3 17.31.1 x86_64
=Sum: Standardní sdílené knihovny (z GNU C knihovny)
+Del:
<!-- DT:Rich -->
<p>This package is required for proper operation and management of your Linux system.
Remove it only if you know what are you doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The GNU C Library provides the most important standard libraries used by nearly all programs: the standard C library, the standard math library, and the POSIX thread library.
A system is not functional without these libraries.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-devel 2.11.3 17.31.1 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p>Tyto knihovny jsou potřebné pro překlad programů v jazyce C.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-devel-32bit 2.11.3 17.31.1 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p>Tyto knihovny jsou potřebné pro překlad programů v jazyce C.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-i18ndata 2.11.3 17.31.1 x86_64
=Sum: Databáze pro 'locale'
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje data potřebná pro vytvoření souborů s locale
daty používaných pro lokalizaci vlastností knihovny GNU libc. Normálně
není nutné tyto balíčky instalovat, protože datové soubory jsou už
vytvořeny.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-locale 2.11.3 17.31.1 x86_64
=Sum: Data pro lokalizované programy
+Des:
<!-- DT:Rich -->
<p>Zde jsou obsaženy překlady pro internacionalizaci GNU C knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-locale-32bit 2.11.3 17.31.1 x86_64
=Sum: Data pro lokalizované programy
+Des:
<!-- DT:Rich -->
<p>Zde jsou obsaženy překlady pro internacionalizaci GNU C knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2 2.22.1 1.4.10 x86_64
=Sum: C++ rozhraní pro GLib2
+Des:
<!-- DT:Rich -->
<p>Gtkmm poskytuje C+ rozhraní ke GUI knihovně GTK+. glibmm24
obaluje Glib2. Umožňuje rychle vytvářet uživatelská rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2-32bit 2.22.1 1.4.10 x86_64
=Sum: C++ rozhraní pro GLib2
+Des:
<!-- DT:Rich -->
<p>Gtkmm poskytuje C+ rozhraní ke GUI knihovně GTK+. glibmm24
obaluje Glib2. Umožňuje rychle vytvářet uživatelská rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: gltt 2.5.2 704.28 x86_64
=Sum: Library for TrueType with OpenGL Applications
+Des:
<!-- DT:Rich -->
<p>Gltt je knihovna, která umožňuje číst a vykreslovat TrueType fonty
v libovolné OpenGL aplikaci.
</p><p>
Podporuje vykreslování rastrových fontů s antialiasingem i vykreslování
vektorizovaných fontů a polygonů.
</p>
-Des:
##----------------------------------------
=Pkg: gmime-2_4 2.4.8 1.2.55 x86_64
=Sum: MIME Library Utilities
+Des:
<!-- DT:Rich -->
<p>GMime je sada utilit pro analýzu a vytváření zpráv pomocí
MIME (Multipurpose Internet Mail Extension).
</p>
-Des:
##----------------------------------------
=Pkg: gmime-sharp 2.2.23 1.50.1 x86_64
=Sum: MIME Library Mono Bindings
+Des:
<!-- DT:Rich -->
<p>GMime je sada utilit pro analýzu a vytváření zpráv pomocí
MIME (Multipurpose Internet Mail Extension).
</p>
-Des:
##----------------------------------------
=Pkg: gmp-32bit 4.2.3 10.99 x86_64
=Sum: GNU MP knihovna
+Des:
<!-- DT:Rich -->
<p>Knihovna pro výpočty s velkými čísly (celými i s pohyblivou čárkou).
</p>
-Des:
##----------------------------------------
=Pkg: gmp 4.2.3 10.99 x86_64
=Sum: GNU MP knihovna
+Des:
<!-- DT:Rich -->
<p>Knihovna pro výpočty s velkými čísly (celými i s pohyblivou čárkou).
</p>
-Des:
##----------------------------------------
=Pkg: gnet 2.0.7 65.29.8 x86_64
=Sum: Síťová knihovna pro glib programy
+Des:
<!-- DT:Rich -->
<p>Gnet je jednoduchá knihovna napsaná v C, a postavená na glib.
Cílem je rychlost, malá velikost, jednoduchost použití a snadná
portovatelnost.
</p>
-Des:
##----------------------------------------
=Pkg: gnokii 0.6.27 1.1.251 x86_64
=Sum: Programy pro komunikaci s telefonem Nokia
+Des:
<!-- DT:Rich -->
<p>gnokii obsahuje programy pro komunikaci s mobilním telefonem Nokia.
Podporované modely naleznete v souboru /usr/share/doc/packages/gnokii.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets 2.28.0 2.2.81 x86_64
=Sum: Sbírka užitečných programů pro panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík je součástí základního GNOME 2.x balíku. Obsahuje různé
malé obslužné programy, které lze spouštět z panelu.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets-brightness 2.24.1 17.55.10 x86_64
=Sum: A GNOME panel applet to control brightness on laptop screens
+Des:
<!-- DT:Rich -->
<p>GNOME Power Manager is a session daemon that takes care of power management.
</p><p>
This package provides an applet to control brightness on your laptop screen.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets-colorblind 0.16.0 2.2.38 x86_64
=Sum: GNOME lupa plochy
+Des:
<!-- DT:Rich -->
<p>gnome-mag poskytuje řádkové rozhraní pro samostatné použití.
Hlavním smyslem je však ale poskytovat zvětšovací služby jiným
aplikacím a pomocným technologiím.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets-inhibit-powersave 2.24.1 17.55.10 x86_64
=Sum: A GNOME panel applet to disable and reenable power saving
+Des:
<!-- DT:Rich -->
<p>GNOME Power Manager is a session daemon that takes care of power management.
</p><p>
This package provides an applet to disable and reenable powersaving on the fly.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets-invest 2.28.0 2.2.81 x86_64
=Sum: Sbírka užitečných programů pro panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík je součástí základního GNOME 2.x balíku. Obsahuje různé
malé obslužné programy, které lze spouštět z panelu.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-applets-lang 2.28.0 2.2.81 x86_64
=Sum: Sbírka užitečných programů pro panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík je součástí základního GNOME 2.x balíku. Obsahuje různé
malé obslužné programy, které lze spouštět z panelu.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth 2.28.6 0.7.1 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth-lang 2.28.6 0.7.1 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-control-center 2.28.1 0.22.1 x86_64
=Sum: The GNOME Control Center
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje ovládací centrum pro prostředí GNOME 2.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-control-center-lang 2.28.1 0.22.1 x86_64
=Sum: The GNOME Control Center
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje ovládací centrum pro prostředí GNOME 2.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop 2.28.2 0.6.18 x86_64
=Sum: API knihovna pro plochu GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libgnome-desktop, která obsahuje
API patřící k libgnome/libgnomeui, ale dosud neprošla dostatečným
testováním a proto není považována za stabilní. Její používání je pouze
na vlastní riziko.
</p><p>
Součástí jsou také dokumenty, které jsou instalovány jako část
Core-GNOME distribuce: GPL, .soubory GNOME desktop, program
gnome-about, některé manuálové stránky a grafické objekty a
ikony pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop-lang 2.28.2 0.6.18 x86_64
=Sum: API knihovna pro plochu GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libgnome-desktop, která obsahuje
API patřící k libgnome/libgnomeui, ale dosud neprošla dostatečným
testováním a proto není považována za stabilní. Její používání je pouze
na vlastní riziko.
</p><p>
Součástí jsou také dokumenty, které jsou instalovány jako část
Core-GNOME distribuce: GPL, .soubory GNOME desktop, program
gnome-about, některé manuálové stránky a grafické objekty a
ikony pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop-sharp2 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for libgnome-desktop
+Des:
<!-- DT:Rich -->
<p>Mono bindings for libgnome-desktop
</p>
-Des:
##----------------------------------------
=Pkg: gnome-do 0.8.3 1.1.64 x86_64
=Sum: A powerful, speedy, and sexy remote control for your GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>GNOME Do allows you to quickly search for many objects present in your GNOME desktop environment (applications, Evolution contacts, Firefox bookmarks, files, artists and albums in Rhythmbox, Pidgin buddies) and perform commonly used commands on those objects (Run, Open, Email, Chat, Play, etc.).
</p><p>
GNOME Do is inspired by Quicksilver (http://quicksilver.blacktree.com) and GNOME Launch Box (http://developer.imendio.com/projects/gnome-launch-box).
</p>
-Des:
##----------------------------------------
=Pkg: gnome-do-lang 0.8.3 1.1.64 x86_64
=Sum: A powerful, speedy, and sexy remote control for your GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>GNOME Do allows you to quickly search for many objects present in your GNOME desktop environment (applications, Evolution contacts, Firefox bookmarks, files, artists and albums in Rhythmbox, Pidgin buddies) and perform commonly used commands on those objects (Run, Open, Email, Chat, Play, etc.).
</p><p>
GNOME Do is inspired by Quicksilver (http://quicksilver.blacktree.com) and GNOME Launch Box (http://developer.imendio.com/projects/gnome-launch-box).
</p>
-Des:
##----------------------------------------
=Pkg: gnome-do-plugins 0.8.2.1 1.1.61 x86_64
=Sum: Plugins for GNOME Do
+Des:
<!-- DT:Rich -->
<p>GNOME Do allows you to quickly search for many objects present in your GNOME desktop environment (applications, Evolution contacts, Firefox bookmarks, files, artists and albums in Rhythmbox, Pidgin buddies) and perform commonly used commands on those objects (Run, Open, Email, Chat, Play, etc.).
</p><p>
This package contains various plugins for GNOME Do.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-do-plugins-lang 0.8.2.1 1.1.61 x86_64
=Sum: Plugins for GNOME Do
+Des:
<!-- DT:Rich -->
<p>GNOME Do allows you to quickly search for many objects present in your GNOME desktop environment (applications, Evolution contacts, Firefox bookmarks, files, artists and albums in Rhythmbox, Pidgin buddies) and perform commonly used commands on those objects (Run, Open, Email, Chat, Play, etc.).
</p><p>
This package contains various plugins for GNOME Do.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils 0.18.1 1.2.4 x86_64
=Sum: Sbírka dokumentačních nástrojů pro GNOME
+Des:
<!-- DT:Rich -->
<p>The gnome-doc-utils package is a collection of documentation utilities for the GNOMEproject. Notably, it contains utilities for building documentation and all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp. Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered &quot;final&quot;
(tags with contents that should be put into one &quot;message&quot; in
the POT file), &quot;ignored&quot; (skipped over), and &quot;space preserving&quot;.
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML). For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils-lang 0.18.1 1.2.4 x86_64
=Sum: Sbírka dokumentačních nástrojů pro GNOME
+Des:
<!-- DT:Rich -->
<p>The gnome-doc-utils package is a collection of documentation utilities for the GNOMEproject. Notably, it contains utilities for building documentation and all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp. Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered &quot;final&quot;
(tags with contents that should be put into one &quot;message&quot; in
the POT file), &quot;ignored&quot; (skipped over), and &quot;space preserving&quot;.
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML). For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-docker 0.1 86.14 x86_64
=Sum: GNOME dock station applet
+Des:
<!-- DT:Rich -->
<p>GNOME application for notifying laptop users about the state of their dock station and the possibility to undock the system via software, either from the tray icon, or via a hotkey.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-games 2.28.2 0.6.67 x86_64
=Sum: Hry pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje celou řadu malých her pro GNOME 2.x. Balík
gnome-games je součástí standardního GNOME balíku.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-games-lang 2.28.2 0.6.67 x86_64
=Sum: Hry pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje celou řadu malých her pro GNOME 2.x. Balík
gnome-games je součástí standardního GNOME balíku.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring 2.28.2 1.14.30 x86_64
=Sum: GNOME správce hesel
+Des:
<!-- DT:Rich -->
<p>GNOME správce hesel je program pro úschovu hesel a jiných tajných informací.
Při sezení běží, podobně jako ssh agent, jako démon a pro ostatní aplikace je dostupný
přes proměnné prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-32bit 2.28.2 1.14.30 x86_64
=Sum: GNOME správce hesel
+Des:
<!-- DT:Rich -->
<p>GNOME správce hesel je program pro úschovu hesel a jiných tajných informací.
Při sezení běží, podobně jako ssh agent, jako démon a pro ostatní aplikace je dostupný
přes proměnné prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-lang 2.28.2 1.14.30 x86_64
=Sum: GNOME správce hesel
+Des:
<!-- DT:Rich -->
<p>GNOME správce hesel je program pro úschovu hesel a jiných tajných informací.
Při sezení běží, podobně jako ssh agent, jako démon a pro ostatní aplikace je dostupný
přes proměnné prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-pam 2.28.2 1.14.30 x86_64
=Sum: GNOME správce hesel
+Des:
<!-- DT:Rich -->
<p>GNOME správce hesel je program pro úschovu hesel a jiných tajných informací.
Při sezení běží, podobně jako ssh agent, jako démon a pro ostatní aplikace je dostupný
přes proměnné prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-pam-32bit 2.28.2 1.14.30 x86_64
=Sum: GNOME správce hesel
+Des:
<!-- DT:Rich -->
<p>GNOME správce hesel je program pro úschovu hesel a jiných tajných informací.
Při sezení běží, podobně jako ssh agent, jako démon a pro ostatní aplikace je dostupný
přes proměnné prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mag 0.16.0 2.2.38 x86_64
=Sum: GNOME lupa plochy
+Des:
<!-- DT:Rich -->
<p>gnome-mag poskytuje řádkové rozhraní pro samostatné použití.
Hlavním smyslem je však ale poskytovat zvětšovací služby jiným
aplikacím a pomocným technologiím.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mag-lang 0.16.0 2.2.38 x86_64
=Sum: GNOME lupa plochy
+Des:
<!-- DT:Rich -->
<p>gnome-mag poskytuje řádkové rozhraní pro samostatné použití.
Hlavním smyslem je však ale poskytovat zvětšovací služby jiným
aplikacím a pomocným technologiím.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-main-menu 0.9.13 4.18.2 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME nabídka a prohlížeč aplikací
</p>
-Des:
##----------------------------------------
=Pkg: gnome-main-menu-lang 0.9.13 4.18.2 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME nabídka a prohlížeč aplikací
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media 2.28.5 1.7.8 x86_64
=Sum: GNOME Multimédia (Media)
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje multimediální programy pro GNOME.
</p><p>
Dokumentace:
</p><p>
GNOME online nápověda
/usr/share/doc/packages/gnome
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media-lang 2.28.5 1.7.8 x86_64
=Sum: GNOME Multimédia (Media)
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje multimediální programy pro GNOME.
</p><p>
Dokumentace:
</p><p>
GNOME online nápověda
/usr/share/doc/packages/gnome
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus 2.28.0.1 1.1.213 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík je svobodným softwarem a je součástí projektu GNOME.
</p><p>
Obsahuje implementaci návrhu &quot;Desktop Menu Specification&quot; z freedesktop.org:
</p><p>
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Obsaženy jsou rovněž konfigurační soubory nabídky GNOME, .directory
soubory a pomocné programy související s nabídkami.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus-lang 2.28.0.1 1.1.213 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík je svobodným softwarem a je součástí projektu GNOME.
</p><p>
Obsahuje implementaci návrhu &quot;Desktop Menu Specification&quot; z freedesktop.org:
</p><p>
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Obsaženy jsou rovněž konfigurační soubory nabídky GNOME, .directory
soubory a pomocné programy související s nabídkami.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mount 0.8 5.19.51 x86_64
=Sum: The GNOME Mount Program
+Des:
<!-- DT:Rich -->
<p>The GNOME Volume Manager monitors volume-related events and responds
using a user-specified policy.  The GNOME Volume Manager can automount
hotplugged drives, automount inserted removable media, autorun
programs, automatically play audio CDs and video DVDs, and
automatically import photos from a digital camera.  The GNOME Volume
Manager does this entirely in userspace and without polling.
</p><p>
The GNOME Volume Manager sits at the top end of a larger picture that
aims to integrate the Linux system from the kernel on up through the
desktop and its applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mount-lang 0.8 5.19.51 x86_64
=Sum: The GNOME Mount Program
+Des:
<!-- DT:Rich -->
<p>The GNOME Volume Manager monitors volume-related events and responds
using a user-specified policy.  The GNOME Volume Manager can automount
hotplugged drives, automount inserted removable media, autorun
programs, automatically play audio CDs and video DVDs, and
automatically import photos from a digital camera.  The GNOME Volume
Manager does this entirely in userspace and without polling.
</p><p>
The GNOME Volume Manager sits at the top end of a larger picture that
aims to integrate the Linux system from the kernel on up through the
desktop and its applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-netstatus 2.28.0 1.1.157 x86_64
=Sum: Síťový applet GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje applet poskytující v panelu informace o vaší síti .
</p>
-Des:
##----------------------------------------
=Pkg: gnome-netstatus-lang 2.28.0 1.1.157 x86_64
=Sum: Síťový applet GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje applet poskytující v panelu informace o vaší síti .
</p>
-Des:
##----------------------------------------
=Pkg: gnome-nettool 2.28.0 1.1.241 x86_64
=Sum: GNOME rozhraní pro různé síťové nástroje
+Des:
<!-- DT:Rich -->
<p>GNOME Nettool is a set of front-ends to various networking command line tools, like ping, netstat, ifconfig, whois, traceroute, and finger.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-nettool-lang 2.28.0 1.1.241 x86_64
=Sum: GNOME rozhraní pro různé síťové nástroje
+Des:
<!-- DT:Rich -->
<p>GNOME Nettool is a set of front-ends to various networking command line tools, like ping, netstat, ifconfig, whois, traceroute, and finger.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-packagekit 0.3.14 2.78.112 x86_64
=Sum: Applications for the PackageKit API
+Des:
<!-- DT:Rich -->
<p>GNOME PackageKit provides session applications for the PackageKit API.
There are several utilities designed for installing, updating and
removing packages on your system.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-packagekit-lang 0.3.14 2.78.112 x86_64
=Sum: Applications for the PackageKit API
+Des:
<!-- DT:Rich -->
<p>GNOME PackageKit provides session applications for the PackageKit API.
There are several utilities designed for installing, updating and
removing packages on your system.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel 2.28.0 2.6.4 x86_64
=Sum: Panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje panel pro GNOME 2.x. Panel je uživatelsky příjemným a funkčním rozhraním pro správu desktopu, spouštění programů a pro organizaci přístupu k datům.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-32bit 2.28.0 2.6.4 x86_64
=Sum: Panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje panel pro GNOME 2.x. Panel je uživatelsky příjemným a funkčním rozhraním pro správu desktopu, spouštění programů a pro organizaci přístupu k datům.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-lang 2.28.0 2.6.4 x86_64
=Sum: Panel GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje panel pro GNOME 2.x. Panel je uživatelsky příjemným a funkčním rozhraním pro správu desktopu, spouštění programů a pro organizaci přístupu k datům.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for gnome-panel
+Des:
<!-- DT:Rich -->
<p>Mono bindings for gnome-panel
</p>
-Des:
##----------------------------------------
=Pkg: gnome-phone-manager 0.65 2.1.87 x86_64
=Sum: Phone Manager for GNOME
+Des:
<!-- DT:Rich -->
<p>This program connects to your mobile phone over a serial port with a cable, infrared, or Bluetooth connection.
It listens for text messages and, when they arrive, displays them on the desktop. A visual indicator is displayed in the notification area, if available, in the panel.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-phone-manager-lang 0.65 2.1.87 x86_64
=Sum: Phone Manager for GNOME
+Des:
<!-- DT:Rich -->
<p>This program connects to your mobile phone over a serial port with a cable, infrared, or Bluetooth connection.
It listens for text messages and, when they arrive, displays them on the desktop. A visual indicator is displayed in the notification area, if available, in the panel.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-phone-manager-telepathy 0.65 2.1.87 x86_64
=Sum: Telepathy connection manager for GNOME Phone Manager
+Des:
<!-- DT:Rich -->
<p>Provides connections to your phone for telepathy enabled applications.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot 2.0.16 3.44.68 x86_64
=Sum: GNOME programy pro PalmPilot
+Des:
<!-- DT:Rich -->
<p>gnome-pilot je soubor programů a démonů pro integraci GNOME a
PalmPilota&lt;tm&gt; a dalších PalmOS zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot-lang 2.0.16 3.44.68 x86_64
=Sum: GNOME programy pro PalmPilot
+Des:
<!-- DT:Rich -->
<p>gnome-pilot je soubor programů a démonů pro integraci GNOME a
PalmPilota&lt;tm&gt; a dalších PalmOS zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-power-manager 2.24.1 17.55.10 x86_64
=Sum: Správa napájení pro GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME Power Manager je démon sezení obstarávající správu napájení.
</p><p>
GNOME Power Manager využívá informace poskytované HAL pro zobrazování
ikon a zpracování uživatelských a systémových akcí v rámci GNOME sezení.
Autorizovaní uživatelé mohou nastavovat pravidla a předvolby:
</p><p>
GNOME Power Manager funguje jako agent nad stackem projektu Utopia,
který obsahuje jádro, hotplug, udev a HAL. GNOME Power Manager
naslouchá HAL událostem a odpovídá uživatelsky nastavitelnými reakcemi.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-power-manager-lang 2.24.1 17.55.10 x86_64
=Sum: Správa napájení pro GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME Power Manager je démon sezení obstarávající správu napájení.
</p><p>
GNOME Power Manager využívá informace poskytované HAL pro zobrazování
ikon a zpracování uživatelských a systémových akcí v rámci GNOME sezení.
Autorizovaní uživatelé mohou nastavovat pravidla a předvolby:
</p><p>
GNOME Power Manager funguje jako agent nad stackem projektu Utopia,
který obsahuje jádro, hotplug, udev a HAL. GNOME Power Manager
naslouchá HAL událostem a odpovídá uživatelsky nastavitelnými reakcemi.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-print-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for gnome-print
+Des:
<!-- DT:Rich -->
<p>Mono bindings for gnome-print
</p>
-Des:
##----------------------------------------
=Pkg: gnome-python-desktop 2.28.0 1.1.89 x86_64
=Sum: Python modules for GNOME
+Des:
<!-- DT:Rich -->
<p>This package contains a few python modules that used to live in gnome-python-extras:
<ul>
<li>gnomeapplet
</li><li>gnomeprint, gnomeprint.ui
</li><li>gtksourceview
</li><li>wnck
</li><li>totem.plparser
</li><li>gtop
</li><li>nautilusburn
</li><li>mediaprofiles
</li><li>metacity
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gnome-screensaver 2.28.3 0.28.1 x86_64
=Sum: GNOME šetřič obrazovky
+Des:
<!-- DT:Rich -->
<p>gnome-screensaver is a screen saver and locker that aims to havesimple, sane, and secure defaults and to be well integrated in the desktop.
It is designed to support:<ul>
<li>The ability to lock down configuration settings
</li><li>Translation into other languages
</li><li>User switching
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gnome-screensaver-lang 2.28.3 0.28.1 x86_64
=Sum: GNOME šetřič obrazovky
+Des:
<!-- DT:Rich -->
<p>gnome-screensaver is a screen saver and locker that aims to havesimple, sane, and secure defaults and to be well integrated in the desktop.
It is designed to support:<ul>
<li>The ability to lock down configuration settings
</li><li>Translation into other languages
</li><li>User switching
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gnome-session 2.28.0 3.7.23 x86_64
=Sum: Nástroje sezení v GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje základní nástroje sezení pro pracovní plochu GNOME 2.x,
 jako je třeba správa funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-session-lang 2.28.0 3.7.23 x86_64
=Sum: Nástroje sezení v GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje základní nástroje sezení pro pracovní plochu GNOME 2.x,
 jako je třeba správa funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-settings-daemon 2.28.2 0.33.2 x86_64
=Sum: Settings daemon for the GNOME desktop
+Des:
<!-- DT:Rich -->
<p>gnome-settings-daemon provides a daemon run by all GNOME sessions to provide live access to configuration settings and the changes done to them as well as basic services like a clipboard manager, controlling the startup of the screensaver, etc.
</p><p>
This module was previously part of GNOME Control Center, but has been splitted from it for a more general use.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-settings-daemon-lang 2.28.2 0.33.2 x86_64
=Sum: Settings daemon for the GNOME desktop
+Des:
<!-- DT:Rich -->
<p>gnome-settings-daemon provides a daemon run by all GNOME sessions to provide live access to configuration settings and the changes done to them as well as basic services like a clipboard manager, controlling the startup of the screensaver, etc.
</p><p>
This module was previously part of GNOME Control Center, but has been splitted from it for a more general use.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-sharp2 2.24.0 14.41 x86_64
=Sum: Mono bindings for Gnome
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for Gnome.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-speech 0.4.25 1.1.214 x86_64
=Sum: GNOME API hlasové syntézy
+Des:
<!-- DT:Rich -->
<p>GNOME Speech 1.0 API je stále ve vývoji. Bude poskytovat API jak pro hlasový
výstup tak vstup. Je ovlivněno především Java Speech API verze 1.0 i 2.0. 
</p><p>
Tento balíček poskytuje ovladač pro hlasový syntetizátor Festival.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-spell2 1.0.8 47.32 x86_64
=Sum: Komponenta kontroly pravopisu pro Bonobo
+Des:
<!-- DT:Rich -->
<p>Komponenta pravopisu pro GNOME/Bonobo.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-spell2-lang 1.0.8 47.32 x86_64
=Sum: Komponenta kontroly pravopisu pro Bonobo
+Des:
<!-- DT:Rich -->
<p>Komponenta pravopisu pro GNOME/Bonobo.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-system-monitor 2.28.0 1.7.1 x86_64
=Sum: Jednoduchý monitor procesů
+Des:
<!-- DT:Rich -->
<p>Gnome-system-monitor (dříve Procman) je jednoduchý monitor
procesů a systému pro prostředí GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-system-monitor-lang 2.28.0 1.7.1 x86_64
=Sum: Jednoduchý monitor procesů
+Des:
<!-- DT:Rich -->
<p>Gnome-system-monitor (dříve Procman) je jednoduchý monitor
procesů a systému pro prostředí GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-terminal 2.28.2 1.3.42 x86_64
=Sum: Terminál pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje GNOME 2.x terminál. Tím je možné rychle a
efektivně spustit programy na příkazové řádce.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-terminal-lang 2.28.2 1.3.42 x86_64
=Sum: Terminál pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje GNOME 2.x terminál. Tím je možné rychle a
efektivně spustit programy na příkazové řádce.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-user-share 2.28.2 1.1.151 x86_64
=Sum: GNOME user file sharing
+Des:
<!-- DT:Rich -->
<p>gnome-user-share is a small package that binds together various free
software projects to bring easy to use user-level file sharing to the
masses.
</p><p>
The program is meant to run in the background when the user is logged
in, and when file sharing is enabled a webdav server is started that
shares the $HOME/Public folder. The share is then published to all
computers on the local network using mDNS/rendezvous, so that it shows
up in the Network location in GNOME.
</p><p>
The program also allows to share files using ObexFTP over Bluetooth.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-user-share-lang 2.28.2 1.1.151 x86_64
=Sum: GNOME user file sharing
+Des:
<!-- DT:Rich -->
<p>gnome-user-share is a small package that binds together various free
software projects to bring easy to use user-level file sharing to the
masses.
</p><p>
The program is meant to run in the background when the user is logged
in, and when file sharing is enabled a webdav server is started that
shares the $HOME/Public folder. The share is then published to all
computers on the local network using mDNS/rendezvous, so that it shows
up in the Network location in GNOME.
</p><p>
The program also allows to share files using ObexFTP over Bluetooth.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-utils 2.28.3 0.2.85 x86_64
=Sum: Základní utility pro GNOME 2.x desktop
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje některé esenciální programy pro GNOME 2.x.
Mezi nimi je např. program pro vyhledávání, zobrazení informací o systému atd.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-utils-lang 2.28.3 0.2.85 x86_64
=Sum: Základní utility pro GNOME 2.x desktop
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje některé esenciální programy pro GNOME 2.x.
Mezi nimi je např. program pro vyhledávání, zobrazení informací o systému atd.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs-sharp2 2.24.0 14.41 x86_64
=Sum: Mono bindings for gnomevfs
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings gnomevfs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2 2.24.2 2.6.1 x86_64
=Sum: Knihovny GNOME 2.x pro virtuální souborový systém
+Des:
<!-- DT:Rich -->
<p>GNOME VFS je virtuální souborový systém GNOME a je základem pro správce
souborů Nautilus. Poskytuje modulární architekturu a různé moduly, podporu
souborových systémů, HTTP, FTP atd. Poskytuje API založené na URI, asynchronní
souborové operace podporující backend, knihovnu pro manipulaci s MIME typy
a další funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-32bit 2.24.2 2.6.1 x86_64
=Sum: Knihovny GNOME 2.x pro virtuální souborový systém
+Des:
<!-- DT:Rich -->
<p>GNOME VFS je virtuální souborový systém GNOME a je základem pro správce
souborů Nautilus. Poskytuje modulární architekturu a různé moduly, podporu
souborových systémů, HTTP, FTP atd. Poskytuje API založené na URI, asynchronní
souborové operace podporující backend, knihovnu pro manipulaci s MIME typy
a další funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-lang 2.24.2 2.6.1 x86_64
=Sum: Knihovny GNOME 2.x pro virtuální souborový systém
+Des:
<!-- DT:Rich -->
<p>GNOME VFS je virtuální souborový systém GNOME a je základem pro správce
souborů Nautilus. Poskytuje modulární architekturu a různé moduly, podporu
souborových systémů, HTTP, FTP atd. Poskytuje API založené na URI, asynchronní
souborové operace podporující backend, knihovnu pro manipulaci s MIME typy
a další funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-web-photo 0.9 12.7.1 x86_64
=Sum: GNOME Web Photographer
+Des:
<!-- DT:Rich -->
<p>GNOME Web Photographer je nástroj pro vytváření obrazových souborů
a jejich náhledů z HTML souborů a webových stránek.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-web-photo-lang 0.9 12.7.1 x86_64
=Sum: GNOME Web Photographer
+Des:
<!-- DT:Rich -->
<p>GNOME Web Photographer je nástroj pro vytváření obrazových souborů
a jejich náhledů z HTML souborů a webových stránek.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus 1.1.2 188.43 x86_64
=Sum: Assistive Technologies for Blind and Visually Impaired Users
+Des:
<!-- DT:Rich -->
<p>Projekt gnopernicus umožňuje zrakově hendikepovaným používat prostředí GNOME a aplikace z GNOME/GTK+ 2. Umožňuje postupné zobrazování a zvětšení plochy a samozřejmě také hlasovou syntézu a výstup na braillův řádek.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus-lang 1.1.2 188.43 x86_64
=Sum: Assistive Technologies for Blind and Visually Impaired Users
+Des:
<!-- DT:Rich -->
<p>Projekt gnopernicus umožňuje zrakově hendikepovaným používat prostředí GNOME a aplikace z GNOME/GTK+ 2. Umožňuje postupné zobrazování a zvětšení plochy a samozřejmě také hlasovou syntézu a výstup na braillův řádek.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash 2.2.7 1.35 x86_64
=Sum: Osobní finanční manažer
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check book-like register GUI allows you to enter and track bank accounts, stocks, income, and even currency trades. A full set of reports allows you to see the state ofyour finances.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensurebalanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash-lang 2.2.7 1.35 x86_64
=Sum: Osobní finanční manažer
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check book-like register GUI allows you to enter and track bank accounts, stocks, income, and even currency trades. A full set of reports allows you to see the state ofyour finances.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensurebalanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gnuplot 4.2.3 5.34 x86_64
=Sum: Program pro kreslení grafů
+Des:
<!-- DT:Rich -->
<p>GNUplot je interaktivní program pro vykreslování funkcí ovládaný
z příkazového řádku. Podporuje množství typů terminálů, plotterů
a tiskáren (včetně mnoha barevných zařízení a pseudozařízení jako
je LaTeX). Podporu nových zařízení lze jednoduše přidat.
</p>
-Des:
##----------------------------------------
=Pkg: gnutls 2.4.1 24.39.33.1 x86_64
=Sum: GNU TLS knihovna
+Des:
<!-- DT:Rich -->
<p>GnuTLS projekt má za cíl vytvořit knihovnu poskytující bezpečné připojení
na úrovni transportní vrstvy. V současné době GnuTLS knihovna implementuje
navržené TLS standardy skupiny IETF.
</p>
-Des:
##----------------------------------------
=Pkg: gob2 2.0.15 1.17 x86_64
=Sum: GOB2 - GObject Builder
+Des:
<!-- DT:Rich -->
<p>GOB je jednoduchý preprocesor, který umožňuje tvorbu GObject
(glib2 objekty). Vytváří objekty ze souboru s inline C kódem tak,
aby nebylo třeba editovat generované soubory. Syntaxe je
inspirovaná javou a yacc. Podporuje generování kódu C++.
</p>
-Des:
##----------------------------------------
=Pkg: goffice 0.7.2 1.32 x86_64
=Sum: GLib/GTK+ Set of Document-Centric Objects and Utilities
+Des:
<!-- DT:Rich -->
<p>These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.
These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.<ul>
<li>Plug-ins
</li><li>Load and save documents
</li><li>Undo and redo
</li></ul>
GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p>
-Des:
##----------------------------------------
=Pkg: goffice-lang 0.7.2 1.32 x86_64
=Sum: GLib/GTK+ Set of Document-Centric Objects and Utilities
+Des:
<!-- DT:Rich -->
<p>These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.
These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.<ul>
<li>Plug-ins
</li><li>Load and save documents
</li><li>Undo and redo
</li></ul>
GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p>
-Des:
##----------------------------------------
=Pkg: gok 2.28.1 0.3.51 x86_64
=Sum: GNOME klávesnice na obrazovce
+Des:
<!-- DT:Rich -->
<p>GOK (GNOME On-screen Keyboard) je dynamická klávesnice na obrazovce pro
unixové a UNIX-like systémy. Mimo různých typů skenování podporuje
také dokončování slov.
</p>
-Des:
##----------------------------------------
=Pkg: gok-lang 2.28.1 0.3.51 x86_64
=Sum: GNOME klávesnice na obrazovce
+Des:
<!-- DT:Rich -->
<p>GOK (GNOME On-screen Keyboard) je dynamická klávesnice na obrazovce pro
unixové a UNIX-like systémy. Mimo různých typů skenování podporuje
také dokončování slov.
</p>
-Des:
##----------------------------------------
=Pkg: goocanvas 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: goocanvas-lang 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: goom2k4 0 82.32 x86_64
=Sum: Program and Library for Visual Effects
+Des:
<!-- DT:Rich -->
<p>Goom je generátor vizuálních efektů pro mp3 přehrávače.
</p>
-Des:
##----------------------------------------
=Pkg: gpart 0.1h 565.22 x86_64
=Sum: Nástroj pro rekonstrukci tabulky oddílů
+Des:
<!-- DT:Rich -->
<p>Gpart je malý nástroj, který, pokud byla poškozena primární tabulka oddílů, se
snaží nalézt oddíly na pevných discích PC.
Program gpart mimo jiné podporuje oddíly formátované jako ext2, FAT 12/16/32,
Reiserfs, NTFS, HPFS a mnoho dalších.
Před použitím programu gpart si prosím přečtěte jeho manuálovou stránku
a /usr/share/doc/packages/gpart/README.
</p>
-Des:
##----------------------------------------
=Pkg: gpg2 2.0.9 25.33.27.1 x86_64
=Sum: GnuPG 2
+Des:
<!-- DT:Rich -->
<p>NewPG je projekt s rozšířením &quot;GnuPG&quot; nebo GPG.
Obsahuje: GPGSM, gpg agent a knihovnu keybox.
</p>
-Des:
##----------------------------------------
=Pkg: gpg2-lang 2.0.9 25.33.27.1 x86_64
=Sum: GnuPG 2
+Des:
<!-- DT:Rich -->
<p>NewPG je projekt s rozšířením &quot;GnuPG&quot; nebo GPG.
Obsahuje: GPGSM, gpg agent a knihovnu keybox.
</p>
-Des:
##----------------------------------------
=Pkg: gpgme 1.1.6 25.30 x86_64
=Sum: Knihovna určená pro zjednodušení přístupu aplikací ke GnuPG.
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) je knihovna vytvořená pro jednodušší
přístup aplikací ke GnuPG.Poskytuje vyšší vrstvu Crypto API pro šifrování,
dešifrování, podepisování, kontrolu podpisu a správu klíčů. Může používat i
jiný engine než GnuPG.
</p><p>
Protože příme používání GnuPG z aplikace je dost náročné, je doporučeno
zkusit nejdříve GPGME. Tímto způsobem pak případné opravy stačí provést
na jednom místě a každá aplikace z toho ihned může těžit. Vývojáři MUA
by měli obzvláště zvážit použití GPGME. Plánuje se i vytvoření sady běžných
widgetů pro výběr klíče.
</p>
-Des:
##----------------------------------------
=Pkg: gphoto 2.4.3 1.24 x86_64
=Sum: Program pro obsluhu digitálních fotoaparátů
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a command line tool for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive. It does not support digital cameras based on the USB storage protocol, because those can be mounted by Linux directly.
Find the list of supported cameras at the following URL:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
<tt>gphoto2 --list-cameras</tt>
</p>
-Des:
##----------------------------------------
=Pkg: gphotofs 0.4.0 160.24 x86_64
=Sum: User Level File System for gphoto-Based Cameras
+Des:
<!-- DT:Rich -->
<p>This package provides a <a href="pkg://fuse">fuse</a> module to make digital cameras
supported by <a href="pkg://libgphoto2">libgphoto2</a> visible as a file system.
</p>
-Des:
##----------------------------------------
=Pkg: gpm 1.20.1 452.83 x86_64
=Sum: Podpora myši na textových konzolích
+Des:
<!-- DT:Rich -->
<p>Démon gpm je server pro myš, který umí pracovat s programy v konzoli.
Lze ho použít v <a href="pkg://mc"> Midnight Commander] nebo [pkg://w3m</a>.
Umí i funkci vyjmi a vlož.
</p>
-Des:
##----------------------------------------
=Pkg: gpm-32bit 1.20.1 452.83 x86_64
=Sum: Podpora myši na textových konzolích
+Des:
<!-- DT:Rich -->
<p>Démon gpm je server pro myš, který umí pracovat s programy v konzoli.
Lze ho použít v <a href="pkg://mc"> Midnight Commander] nebo [pkg://w3m</a>.
Umí i funkci vyjmi a vlož.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz 2.20.2 6.19 x86_64
=Sum: Nástroje pro vizualizaci grafů
+Des:
<!-- DT:Rich -->
<p>Sbírka nástrojů a tcl balíků pro práci s grafy
(grafy ve smyslu uzly a hrany, ne sloupcové grafy).
</p>
-Des:
##----------------------------------------
=Pkg: graphviz-gd 2.20.2 6.33 x86_64
=Sum: Graphviz plugin for renderers based on gd
+Des:
<!-- DT:Rich -->
<p>The graphviz-gd package contains the gd extensions for the graphviz tools.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz-gnome 2.20.2 6.33 x86_64
=Sum: Graphviz plugins that use gtk/GNOME
+Des:
<!-- DT:Rich -->
<p>Graphviz plugins that use gtk/GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: grep 2.7 5.5.61 x86_64
=Sum: Vypisuje řádky odpovídající vzorku
+Des:
<!-- DT:Rich -->
<p>GNU grep, &quot;nejrychlejší grep na západě&quot; (doufejme).
</p><p>
&quot;grep&quot; hledá řádky s odpovídajícím vzorkem.
</p>
-Des:
##----------------------------------------
=Pkg: groff 1.18.1.1 167.18.61 x86_64
=Sum: Systém pro formátování dokumentů GNU troff
+Des:
<!-- DT:Rich -->
<p>Balíček groff obsahuje programy kompatibilní s programy troff, nroff,
eqn, tbl a dalšími unixovými programy pro formátování textů.
</p><p>
Groff se používá pro &quot;překlad&quot; manuálových stránek uložených ve formátu
groff/nroff pro výstup na různých zařízeních, např. pro zobrazení na
obrazovce nebo pro tisk na postscriptových tiskárnách ve formátu
PostScript(tm). Manuálové stránky většiny programů jsou uloženy
v /usr/share/man/ nebo /usr/X11R6/man/.
</p>
-Des:
##----------------------------------------
=Pkg: grub 0.97 162.13.12.1 x86_64
=Sum: GRand Unified Bootloader
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správnou funkci a správu vašeho
systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>GNU GRUB (GRand Unified Bootloader) je program umožňující výběr, pod
jakým operačním systémem má být počítač nastartován. Je určen pro IBM
PC kompatibilní počítače a je odvozen z GRUB. Měl by být přívětivý
k začátečníkům a netechnicky orientovaným uživatelům a zároveň by měl
být v různých situacích nápomocný odborníkům.
Je kompatibilní s Free/Net/OpenBSD a Linuxem. Pomocí tzv. řetězových
zavaděčů (chain-loaders) podporuje Windows 9x/NT a OS/2. Lze používat
uživatelské rozhraní řízené menu nebo rozhraní příkazového řádku.
</p>
-Des:
##----------------------------------------
=Pkg: gsf-sharp 0.8.1 2.30 x86_64
=Sum: Mono vazby pro libgsf
+Des:
<!-- DT:Rich -->
<p>Mono vazby pro libgsf.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-32bit 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-fluendo-mp3 12 4.7.18 x86_64
=Sum: Gstreamer mp3 plugin from Fluendo
+Des:
<!-- DT:Rich -->
<p>Fully licensed mp3-decoder binary as available from http://shop.fluendo.com free of charge. The source code has a free MIT-like license, as explained in https://core.fluendo.com/gstreamer/svn/trunk/gst-fluendo-mp3/LICENSE
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>FLUENDO MP3 PLUG-IN FOR GSTREAMER COMMERCIAL LICENSE
AGREEMENT BY FLUENDO, S.A. (&quot;FLUENDO&quot;)
</p><p>
IMPORTANT - READ CAREFULLY
THE FOLLOWING LICENSE AGREEMENT AS AMENDED FROM TIME TO TIME AND
AVAILABLE WITH THIS PACKAGE (THE &quot;LICENSE AGREEMENT&quot;)GOVERNS THE
DOWNLOADING, INSTALLATION AND/OR USE OF FLUENDO&#39;S PROPRIETARY SOFTWARE
&quot;MP3 PLUG-IN FOR GSTREAMER&quot;, INCLUDING ANY COMPONENTS,
COPIES, UPDATES,ENHANCEMENTS, UPGRADES OR SUBSEQUENT VERSIONS THEREOF
THAT MAY BE RELEASED BY FLUENDO (COLLECTIVELY, THE &quot;SOFTWARE&quot;) AND ANY
ACCOMPANYING MANUALS, HELP FILES AND DOCUMENTATION (THE &quot;DOCUMENTATION&quot;).
PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT AS BY
DOWNLOADING, USING AND/OR INSTALLING THE SOFTWARE YOU (THE &quot;LICENSEE&quot;)
CONSENT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS
LICENSE AGREEMENT. YOU MAY DOWNLOAD, INSTALL AND/OR USE THE SOFTWARE
SUBJECT TO THOSE TERMS AND CONDITIONS AND TO ANY APPLICABLE LAW, BEING
SOLELY LIABLE FOR ANY BREACH THEREOF. IF YOU DO NOT AGREE TO THIS
LICENSE AGREEMENT, FLUENDO DOES NOT GRANT ANY LICENSE TO YOU FOR THE
SOFTWARE AND YOU MAY NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE.
</p><p>
GRANT OF LICENSE AND RESTRICTIONS<ol>
<li>Subject to the Licensee&#39;s acceptance and continued compliance with
this License Agreement, Fluendo hereby grants the
Licensee a non-exclusive, non-transferable limited license to install,
use or otherwise benefit from the functionality of the Software in the
manner and for the purposes described in the Documentation, on a per
computer basis.

</li><li>Except as expressly authorized by Fluendo in writing, it is forbidden to:
(i)   decompile, reverse engineer, disassemble or decode the Software
or any copy, adaptation, transcription or merged portion of the
Software;
(ii)  attempt to ascertain the source code of the Software or any of its
components by any means, nor modify, adapt, translate or create
derivative works based on the Software;
(iii) tamper or interfere with the functionality, delivery or operation
of the Software while using or installing it;
(iv)  sell, resell, rent, lease, distribute, transfer, assign, sublicense
or otherwise deal with the Software, its components, the Documentation
or any of the rights granted under this License Agreement;
(v)   duplicate, reproduce or copy (except for reasonable backup purposes)
the Software or the Documentation; or
(vi)  export or re-export the Software, directly or indirectly, into any
country prohibited by law.

</li><li>It is prohibited to modify, remove, suppress, or in any other way make
inconspicuous the copyright, digital fingerprints, watermarks,
identification labels, legal notices contained within the Software or
other technical protection devices or data identifying Fluendo&#39;s or its
licensors rights in the Software, its files or its components.

</li><li>No right is granted herein to any third party to use the Software, to
the Licensee to use the Software for any third party, or to the Licensee
to utilize the Software for any purpose whatsoever not described herein.
</li></ol>
OWNERSHIP<ol>
<li>Save for the right to use the Software and the Documentation
expressly provided for in this License Agreement, the Licensee agrees
and acknowledges that all title to and rights in the Software, its
components, structure, databases, source code or design, and in the
Documentation, including without limitation all copyright trademarks,
trade secrets, patents, and all other intellectual or industrial
property rights and other confidential or proprietary information
contained therein remain the property of Fluendo or its licensors.
</li></ol>
LIABILITY<ol>
<li>TO THE MAXIMUM EXTENT PERMITTED BY LAW, AND PROVIDED THAT LIABILITY
SHALL NOT BE EXCLUDED OR LIMITED IN RESPECT OF MALICIOUS INTENT OR GROSS
NEGLIGENCE, FLUENDO HEREBY EXCLUDES ALL LIABILITY IN RESPECT OF:
</li></ol>
a) ANY LOSS, DAMAGES, CLAIMS OR COSTS WHATSOEVER INCLUDING ANY
CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES, ANY LOST PROFITS OR LOST
SAVINGS, ANY DAMAGES RESULTING FROM BUSINESS INTERRUPTION, OR CLAIMS BY
A THIRD PARTY, EVEN IF A FLUENDO REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS.
b) DAMAGES, CLAIMS OR LIABILITIES ARISING OUT OF ANY OF THE FOLLOWING:
(i)   THE CONTENT (INCLUDING WITHOUT LIMITATION ITS NATURE OR ANY
INTELLECTUAL PROPERTY RIGHTS THEREIN) AND/OR ANY OTHER DATA, IMAGES,
VIDEOS OR SOUNDS WHATSOEVER THAT THE LICENSEE MAY ACCESS OR TRANSMIT
USING THE SOFTWARE;
(ii)  LIABILITY TO ANY EMPLOYER, PRINCIPAL, CLIENT, LESSOR OR PROVIDER OF
COMPUTER EQUIPMENT OR FACILITIES, ARISING OUT OF THE INSTALLATION OF OR
USE OF THE SOFTWARE;
(iii) ANY CHARGES WHICH THE LICENSEE MAY INCUR TO ANY TELECOMMUNICATIONS
SERVICE OR NETWORK.
<ol>
<li>FLUENDO EXPRESSLY EXCLUDES ALL LIABILITY IN CONNECTION WITH ANY THIRD
PARTY APPLICATIONS OR THIRD PARTY COMPONENTS THAT MAY BE INCLUDED WITHIN
THE SOFTWARE, OR YOUR USE THEREOF.

</li><li>TO THE MAXIMUM EXTENT PERMITTED BY LAW, FLUENDO&#39;S AGGREGATE LIABILITY
AND THAT OF ITS AFFILIATES AND SUPPLIERS UNDER OR IN CONNECTION WITH
THIS LICENSE AGREEMENT WILL BE LIMITED IN ANY CASE TO THE AMOUNT PAID
FOR THE SOFTWARE, IF ANY, OR, IF HIGHER, TO THE MINIMUM AMOUNT
STIPULATED BY A COMPULSORY LAW.
</li></ol>
INDEMNITY<ol>
<li>BY DOWNLOADING, INSTALLING, USING OR UNINSTALLING THE SOFTWARE, THE
LICENSEE HEREBY AGREES TO, AT ITS OWN EXPENSE, INDEMNIFY, DEFEND AND
HOLD HARMLESS FLUENDO, ITS PARENTS, SUBSIDIARIES AND AFFILIATES, ITS
BUSINESS PARTNERS, AND ITS AND THEIR RESPECTIVE DIRECTORS, OFFICERS,
EMPLOYEES AND AGENTS FROM AND AGAINST ANY AND ALL LOSSES, DAMAGES,
INJURIES, CAUSES OF ACTION, CLAIMS, DEMANDS AND EXPENSES, INCLUDING
LEGAL FEES AND EXPENSES, OF WHATEVER KIND OR NATURE ARISING OUT OF,
RELATING TO OR RESULTING FROM ANY CLAIM ARISING FROM OR RELATING TO (I)
ANY BREACH BY THE LICENSEE OF THIS LICENSE AGREEMENT; OR (II) THE
LICENSEE&#39;S DOWNLOAD, INSTALLATION, USE OR UNINSTALLATION OF THE
SOFTWARE.
</li></ol>
TERMINATION<ol>
<li>This grant of license begins upon acceptance by the Licensee, either
expressly or through use or possession of the Software, and shall
continue until terminated as provided in this License Agreement.

</li><li>The Licensee may terminate this License Agreement at any time by
uninstalling the Software and destroying all copies of the Software.
Upon any termination, the Licensee agrees to uninstall the Software and
return or destroy all copies of the Software, the Documentation, and all
other associated materials.

</li><li>The Licensee&#39;s failure to comply with any of the terms and conditions
of this License Agreement terminates the Licensee&#39;s right to use the
Software and/or the Documentation, and the Licensee will not receive a
refund.
</li></ol>
CONFIDENTIALITY<ol>
<li>The Software, the Documentation, the terms of this License Agreement
and any other related material or data disclosed by Fluendo to the
Licensee will be confidential (&quot;Confidential Information&quot;) and the
Licensee will not disclose such Confidential Information in any form to
any third party without the express written consent of Fluendo, except
to the extent that such information: (a) is previously known to the
Licensee; (b) becomes publicly known or independently generated through
no breach of this obligation; (c) is acquired by the Licensee from a
third party which was not under an obligation to Fluendo not to disclose
such information; or (d) is required to be disclosed by a court or
regulatory or legislative order or provision.

</li><li>The Licensee will keep the Software and the Documentation in
confidence in perpetuity, will take all measures necessary to protect
and maintain the confidential and proprietary character of the Software
and the Documentation, and will indemnify Fluendo from all losses and
damages resulting from unauthorized or improper disclosure,
dissemination or use of the Software or the Documentation, as a result,
in whole or in part, of the Licensee&#39;s action or inaction.
</li></ol>
GENERAL<ol>
<li>This License Agreement contains the entire agreement between the
Licensee and Fluendo with respect to the subject matter hereof and
supersedes all prior agreements, negotiations, representations of any
kind and proposals, written and oral, relating to its subject matter.

</li><li>If any provision of this License Agreement is declared by a court of
competent jurisdiction to be invalid, illegal or unenforceable, such
provision shall be severed from this License Agreement and the other
provisions shall remain in full force and effect.

</li><li>All notices given by either party to the other pursuant to this
License Agreement shall be in writing and delivered at its principal
place of business by fax or delivery service (in either case with
acknowledgement of receipt).

</li><li>The waiver or failure of Fluendo to exercise in any respect any
rights provided for in this License Agreement shall not be deemed a
waiver of any actual or further right under this License Agreement.

</li><li>This License Agreement shall be governed by and construed in
accordance with the laws of Spain, and the parties submit to the
exclusive jurisdiction of the Courts and Tribunals of Barcelona in
connection with all matters arising under this License Agreement.
</li></ol>
FLUENDO, S.A.
C.I.F.: A-64001217
World Trade Center Edificio Norte, 2 pl.
08039 Barcelona
</p>
-Eul:
##----------------------------------------
=Pkg: gstreamer-0_10-lang 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-bad 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-bad-lang 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-base 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-base-32bit 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-base-lang 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-farsight 0.12.11 1.1.158 x86_64
=Sum: Gstreamer plugins for farsight
+Des:
<!-- DT:Rich -->
<p>Gstreamer plugins for farsight
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-good 0.10.30 5.8.11 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing newplug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-good-lang 0.10.30 5.8.11 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing newplug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-v4l 0.10.30 0.6.10 x86_64
=Sum: GStreamer Streaming-Media Framework v4l Plug-In
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters
that operate on media data. Applications using this library can do
anything media-related, from real-time sound processing to playing
videos. Its plug-in-based architecture means that new data types or
processing capabilities can be added simply by installing newplug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-utils 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: gsynaptics 0.9.14 70.18 x86_64
=Sum: A Graphical Front-End for TouchPad Configuration
+Des:
<!-- DT:Rich -->
<p>gsynaptics is a gnome applet that can be used to configure
synaptics touchpad that is commonly used in laptops.
</p>
-Des:
##----------------------------------------
=Pkg: gsynaptics-lang 0.9.14 70.18 x86_64
=Sum: A Graphical Front-End for TouchPad Configuration
+Des:
<!-- DT:Rich -->
<p>gsynaptics is a gnome applet that can be used to configure
synaptics touchpad that is commonly used in laptops.
</p>
-Des:
##----------------------------------------
=Pkg: gthumb 2.10.10 1.33 x86_64
=Sum: Prohlížeč obrázků pro GNOME
+Des:
<!-- DT:Rich -->
<p>gThumb vám umožní procházet pevný disk a zobrazovat náhledy obrázků.
Podporuje také otevírání jednotlivých obrázků (včetně GIF animací), přidávání
komentářů k obrázkům, organizování obrázků do katalogů, tisk obrázků,
slideshow, nastavení pozadí plochy a mnoho dalšího.
</p>
-Des:
##----------------------------------------
=Pkg: gthumb-lang 2.10.10 1.33 x86_64
=Sum: Prohlížeč obrázků pro GNOME
+Des:
<!-- DT:Rich -->
<p>gThumb vám umožní procházet pevný disk a zobrazovat náhledy obrázků.
Podporuje také otevírání jednotlivých obrázků (včetně GIF animací), přidávání
komentářů k obrázkům, organizování obrázků do katalogů, tisk obrázků,
slideshow, nastavení pozadí plochy a mnoho dalšího.
</p>
-Des:
##----------------------------------------
=Pkg: gtk 1.2.10 1084.19 x86_64
=Sum: Knihovna pro vytváření grafických uživatelských rozhraní
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-32bit 1.2.10 1084.19 x86_64
=Sum: Knihovna pro vytváření grafických uživatelských rozhraní
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-lang 1.2.10 1084.19 x86_64
=Sum: Knihovna pro vytváření grafických uživatelských rozhraní
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp-beans 2.14.1 1.5.164 x86_64
=Sum: Extra Gtk# bindings
+Des:
<!-- DT:Rich -->
<p>Gtk# Beans aims to fill the gap between the current Gtk# packages state and all the blings and desktop integration stuffs anyone would want to use.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2 2.12.10 22.8.109 x86_64
=Sum: .Net vazby pro GTK+
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje Mono vazby pro gtk+, gdk, atk a pango.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-32bit 2.12.10 22.8.109 x86_64
=Sum: .Net vazby pro GTK+
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje Mono vazby pro gtk+, gdk, atk a pango.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-complete 2.12.10 22.8.109 x86_64
=Sum: GTK+ and GNOME bindings for Mono (virtual package)
+Des:
<!-- DT:Rich -->
<p>Gtk# is a library that allows you to build fully native graphical GNOME applications using Mono. Gtk# is a binding to GTK+, the cross platform user interface toolkit used in GNOME. It includes bindings for Gtk, Atk, Pango, Gdk, libgnome, libgnomeui and libgnomecanvas.  (Virtual package which depends on all gtk-sharp2 subpackages)
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-doc 2.12.10 22.8.109 x86_64
=Sum: Monodoc documentation for gtk-sharp2
+Des:
<!-- DT:Rich -->
<p>This package contains the gtk-sharp2 documentation for monodoc.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-gapi 2.12.10 22.8.109 x86_64
=Sum: Analyzátor zdrojových textů v C a generátor C
+Des:
<!-- DT:Rich -->
<p>Balík gtk-sharp-gapi obsahuje parser a generátor kódu používaný GTK, chcete-li připojit knihovny založené na GObjectech nebo zkompilovat projekt, který ho pro připojení takové knihovny používá.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2 2.18.9 0.21.4 x86_64
=Sum: Library for Creation of Graphical User Interfaces (version 2)
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
<a href="pkg://libgnome"> GNOME</a> applications,
<a href="pkg://gimp"> The GIMP</a>, and several others. Originally, version 1 was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used <a href="pkg://gtk"> GTK1</a> have since switched to GTK2.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
To develop applications with gtk, you need the package <a href="pkg://gtk2-devel">gtk2-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-32bit 2.18.9 0.21.4 x86_64
=Sum: Library for Creation of Graphical User Interfaces (version 2)
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
<a href="pkg://libgnome"> GNOME</a> applications,
<a href="pkg://gimp"> The GIMP</a>, and several others. Originally, version 1 was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used <a href="pkg://gtk"> GTK1</a> have since switched to GTK2.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
To develop applications with gtk, you need the package <a href="pkg://gtk2-devel">gtk2-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-devel 2.18.9 0.21.4 x86_64
=Sum: Development environment for the Gtk2 GUI library
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries, configuration files and development tools needed to compile and link applications using the <a href="pkg://gtk2">gtk2</a> library.
</p><p>
In addition, it contains a large set of demo applications in source code and manual pages for the provided Gtk2 development tools.
</p><p>
Gtk2 is a fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several other applications. Originally it was
written for the GIMP and hence has the name Gimp ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-engines 2.16.1 4.26 x86_64
=Sum: Engine pro témata GTK2
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovny pro GTK2 témata.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-engines-32bit 2.16.1 4.26 x86_64
=Sum: Engine pro témata GTK2
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovny pro GTK2 témata.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-lang 2.18.9 0.21.4 x86_64
=Sum: Library for Creation of Graphical User Interfaces (version 2)
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
<a href="pkg://libgnome"> GNOME</a> applications,
<a href="pkg://gimp"> The GIMP</a>, and several others. Originally, version 1 was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used <a href="pkg://gtk"> GTK1</a> have since switched to GTK2.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
To develop applications with gtk, you need the package <a href="pkg://gtk2-devel">gtk2-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtkglext 1.2.0 139.25 x86_64
=Sum: OpenGL Extension to GTK
+Des:
<!-- DT:Rich -->
<p>GtkGLExt is an OpenGL extension to GTK. It provides the GDK objects that support OpenGL rendering in GTK and GtkWidget API add-ons, to make GTK+ widgets OpenGL-capable.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2 3.28.2 0.8.1 x86_64
=Sum: Knihovna pro podporu HTML v rámci GTK2
+Des:
<!-- DT:Rich -->
<p>GtkHTML je odlehčený renderovací, tiskový a editační HTML engine.
Původně postaveno na KHTMLW, ale nyní již vyvíjeno nezávisle.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2-lang 3.28.2 0.8.1 x86_64
=Sum: Knihovna pro podporu HTML v rámci GTK2
+Des:
<!-- DT:Rich -->
<p>GtkHTML je odlehčený renderovací, tiskový a editační HTML engine.
Původně postaveno na KHTMLW, ale nyní již vyvíjeno nezávisle.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml314-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for gtkhtml
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gtkhtml.
</p>
-Des:
##----------------------------------------
=Pkg: gtkiterm 0.5.20040304 259.27 x86_64
=Sum: Mezinárodní emulátor terminálu pro GTK
+Des:
<!-- DT:Rich -->
<p>Mezinárodní emulátor terminálu pro GTK
</p>
-Des:
##----------------------------------------
=Pkg: gtkmm2 2.18.2 1.1.279 x86_64
=Sum: C++ rozhraní pro GTK2 (GUI knihovna pro X)
+Des:
<!-- DT:Rich -->
<p>Gtikmm poskytuje C++ rozhraní pro GUI knihovnu GTK+. gtkmm24 obaluje
GTK+ 2. Mezi zajímavé vlastnosti patří widgety rozšířitelné pomocí dědičnosti,
typově bezpečná zpětná volání a rozsáhlá řada tříd widgetů pro rychlou tvorbu
komplexních uživatelských rozhraní.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-lang 2.8.2 0.1.195 x86_64
=Sum: GTK+ 2.0 widget pro editaci zdrojových kódů
+Des:
<!-- DT:Rich -->
<p>GtkSourceView je textový widget rozšiřující standardní GTK+ 2.x
textový widget GtkTextView.
</p><p>
Vylepšuje GtkTextView o kontrolu syntaxe a další funkce
editoru zdrojových kódů.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview18 1.8.5 29.26 x86_64
=Sum: GTK+ 2.0 widget pro editaci zdrojových kódů
+Des:
<!-- DT:Rich -->
<p>GtkSourceView je textový widget rozšiřující standardní GTK+ 2.x
textový widget GtkTextView.
</p><p>
Vylepšuje GtkTextView o kontrolu syntaxe a další funkce
editoru zdrojových kódů.
</p>
-Des:
##----------------------------------------
=Pkg: gtkspell 2.0.14 17.32 x86_64
=Sum: GTK2 rozhraní kontroly pravopisu
+Des:
<!-- DT:Rich -->
<p>GtkSpell poskytuje v GtkTextView widgetu zvýraznění chyb podobné MSWord/MacOSX.
Kliknutí pravým tlačítkem myši na chybně napsané slovo otevře okno
s nabídkou možných náhrad.
</p>
-Des:
##----------------------------------------
=Pkg: gtkspell-lang 2.0.14 17.32 x86_64
=Sum: GTK2 rozhraní kontroly pravopisu
+Des:
<!-- DT:Rich -->
<p>GtkSpell poskytuje v GtkTextView widgetu zvýraznění chyb podobné MSWord/MacOSX.
Kliknutí pravým tlačítkem myši na chybně napsané slovo otevře okno
s nabídkou možných náhrad.
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap 2.28.2 0.1.152 x86_64
=Sum: Mapa znaků Unicode
+Des:
<!-- DT:Rich -->
<p>Gucharmap. Prohlížeč fontů a znaková mapa pro Unicode.
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap-lang 2.28.2 0.1.152 x86_64
=Sum: Mapa znaků Unicode
+Des:
<!-- DT:Rich -->
<p>Gucharmap. Prohlížeč fontů a znaková mapa pro Unicode.
</p>
-Des:
##----------------------------------------
=Pkg: gudev-sharp 0.2 5.5.167 x86_64
=Sum: .NET/C# Bindings for GUDev
+Des:
<!-- DT:Rich -->
<p>C#/CLI bindings for GUDev
</p>
-Des:
##----------------------------------------
=Pkg: guile 1.8.5 22.16 x86_64
=Sum: Jazyk guile (GNU's Ubiquitous Intelligent Language for Extension)
+Des:
<!-- DT:Rich -->
<p>Guile je přenositelná, vestavěná implementace jazyka Scheme napsaná
v jazyce C. Poskytuje strojově nezávislou prováděcí platformu, která
může být připojována jako knihovna při vytváření rozšiřitelných programů.
</p>
-Des:
##----------------------------------------
=Pkg: gutenprint 5.0.2 2.31 x86_64
=Sum: Gutenprint drivers for CUPS
+Des:
<!-- DT:Rich -->
<p>This package contains the gutenprint drivers (formerly known as gimp-print drivers) for CUPS.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs 1.4.3 0.13.1 x86_64
=Sum: VFS functionality for GLib
+Des:
<!-- DT:Rich -->
<p>VFS functionality for GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs-backends 1.4.3 0.13.1 x86_64
=Sum: VFS functionality for GLib
+Des:
<!-- DT:Rich -->
<p>VFS functionality for GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs-fuse 1.4.3 0.13.1 x86_64
=Sum: VFS functionality for GLib
+Des:
<!-- DT:Rich -->
<p>VFS functionality for GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs-lang 1.4.3 0.13.1 x86_64
=Sum: VFS functionality for GLib
+Des:
<!-- DT:Rich -->
<p>VFS functionality for GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gvim 7.2 8.15.2 x86_64
=Sum: A GUI for Vi
+Des:
<!-- DT:Rich -->
<p>Start: /usr/X11R6/bin/gvim
</p><p>
Copy and modify /usr/share/vim/current/gvimrc to ~/.gvimrc if needed.
</p><p>
Package gvim contains the largest set of features of vim, which is graphical windows and language interpreter, like python, ruby, or perl. You need package vim for the help and other documentation too. If you want less features, you might want to install packages vim-enhanced or vim instead.
</p>
-Des:
##----------------------------------------
=Pkg: gwenhywfar 2.6.2 34.32 x86_64
=Sum: A Multiplatform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows.
It also includes some often needed
functions (for example, handling and parsing of configuration files, reading and writingof XML files, and interprocess communication).
It is used by OpenHBCI2,Libchipcard2, Simthetic, AqBanking, and QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: gwenview 4.3.5 0.2.1 x86_64
=Sum: Jednoduchý prohlížeč obrázků pro KDE
+Des:
<!-- DT:Rich -->
<p>Gwenview is a simple image viewer for KDE. It features a folder tree window and a file list window, providing easy navigation of your file hierarchy.
</p>
-Des:
##----------------------------------------
=Pkg: gzip 1.3.12 69.19.1 x86_64
=Sum: Komprimační nástroje GNU zip
+Des:
<!-- DT:Rich -->
<p>Gzip reduces the size of the named files using Lempel-Ziv coding LZ77.  Whenever possible, each file is replaced by one with the extension .gz, while keeping the same ownership modes and access and modification times.
</p>
-Des:
##----------------------------------------
=Pkg: hal 0.5.12 23.58.22 x86_64
=Sum: Démon pro sbírání informací o hardwaru
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both, physical devices (such as PCI and USB) and the device classes (such as input, net, and block) physical devices have. Besides it allows merging of information from device info files specific to a device.
HAL provides a API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices.
For further information, please refer to the  HAL specification.
</p>
-Des:
##----------------------------------------
=Pkg: hal-32bit 0.5.12 23.58.22 x86_64
=Sum: Démon pro sbírání informací o hardwaru
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both, physical devices (such as PCI and USB) and the device classes (such as input, net, and block) physical devices have. Besides it allows merging of information from device info files specific to a device.
HAL provides a API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices.
For further information, please refer to the  HAL specification.
</p>
-Des:
##----------------------------------------
=Pkg: hal-palm 0.12.3 2.26 x86_64
=Sum: HAL FDI file to identify Palm devices
+Des:
<!-- DT:Rich -->
<p>HAL FDI file to identify Palm devices and set pda.platform to &quot;pda&quot; for the
USB Raw device. In combination with hal-resmgr the desktop user will get
permission to the USB Raw device and can use the libusb transport of libpisock.
</p>
-Des:
##----------------------------------------
=Pkg: haveged 1.3 0.6.1 x86_64
=Sum: Feed entropy into random pool
+Des:
<!-- DT:Rich -->
<p>The haveged daemon feeds the linux entropy pool with random
numbers generated from hidden processor state.
</p><p>
For more informations see http://www.issihosts.com/haveged/
</p>
-Des:
##----------------------------------------
=Pkg: hdparm 9.27 1.6.39 x86_64
=Sum: Program pro nastavení a čtení parametrů pevného disku
+Des:
<!-- DT:Rich -->
<p>Nástroj pro ladění ioctl vlastností IDE ovladače a IDE zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: hp-drive-guard 0.3.12 0.3.1 x86_64
=Sum: HP DriveGuard for SuSE
+Des:
<!-- DT:Rich -->
<p>HP DriveGuard for SuSE. Can protect hard disks on HP laptops by spinning them
down when shaking or free-fall is detected.
</p>
-Des:
##----------------------------------------
=Pkg: hplip 3.11.10 0.6.7.1 x86_64
=Sum: HP's Printing, Scanning, and Faxing Software
+Des:
<!-- DT:Rich -->
<p>The Hewlett-Packard Linux Imaging and Printing project (HPLIP) provides a unified single and multifunction connectivity solution for HP printers and scanners (in particular, HP all-in-one devices).
</p><p>
HPLIP provides unified connectivity for printing, scanning, sending faxes, photo card access, and device management and is designed to work with CUPS.
</p><p>
It includes the Ghostscript printer driver HPIJS for HP printers and a special &quot;hp&quot; CUPS back-end that provides bidirectional communication with the device (required for HP printer device management).
</p><p>
It also includes the SANE scanner driver &quot;hpaio&quot; for HP all-in-one devices.
Basic PC send fax functionality is supported on a number of devices.
</p><p>
The special &quot;hpfax&quot; CUPS back-end is required to send faxes.
Direct uploading (i.e. without print and scan) of received faxes from the device to the PC is not supported.
</p><p>
The &quot;hp-toolbox&quot; program is provided for device management.
</p><p>
The &quot;hp-sendfax&quot; program must be used to send faxes.
</p><p>
The &quot;hp-setup&quot; program can be used to set up HP all-in-one devices.
</p><p>
The HPLIP project is open source software and uses GPL-compatible licenses. For more information, see:
</p><p>
http://hpinkjet.sourceforge.net/
</p><p>
/usr/share/doc/packages/hplip/index.html
</p>
-Des:
##----------------------------------------
=Pkg: hplip-hpijs 3.11.10 0.6.7.1 x86_64
=Sum: HP's Printing, Scanning, and Faxing Software
+Des:
<!-- DT:Rich -->
<p>The Hewlett-Packard Linux Imaging and Printing project (HPLIP) provides a unified single and multifunction connectivity solution for HP printers and scanners (in particular, HP all-in-one devices).
</p><p>
HPLIP provides unified connectivity for printing, scanning, sending faxes, photo card access, and device management and is designed to work with CUPS.
</p><p>
It includes the Ghostscript printer driver HPIJS for HP printers and a special &quot;hp&quot; CUPS back-end that provides bidirectional communication with the device (required for HP printer device management).
</p><p>
It also includes the SANE scanner driver &quot;hpaio&quot; for HP all-in-one devices.
Basic PC send fax functionality is supported on a number of devices.
</p><p>
The special &quot;hpfax&quot; CUPS back-end is required to send faxes.
Direct uploading (i.e. without print and scan) of received faxes from the device to the PC is not supported.
</p><p>
The &quot;hp-toolbox&quot; program is provided for device management.
</p><p>
The &quot;hp-sendfax&quot; program must be used to send faxes.
</p><p>
The &quot;hp-setup&quot; program can be used to set up HP all-in-one devices.
</p><p>
The HPLIP project is open source software and uses GPL-compatible licenses. For more information, see:
</p><p>
http://hpinkjet.sourceforge.net/
</p><p>
/usr/share/doc/packages/hplip/index.html
</p>
-Des:
##----------------------------------------
=Pkg: htdig 3.2.0b6 133.18 x86_64
=Sum: Indexovací a vyhledávací systém pro WWW
+Des:
<!-- DT:Rich -->
<p>Systém Ht://Dig je kompletní nástroj pro indexování a vyhledávání WWW
dokumentů pro malou doménu nebo intranet. ht://Dig nemá být náhradou
za výkonné celointernetové vyhledávací systémy jako je Lycos, Infoseek,
Webcrawler nebo AltaVista. Je vhodný jako prostředek pro prohledávání
WWW serveru jediné společnosti, areálu nebo pouze určité malé části WWW
uzlu.
</p><p>
</p><p>
Na rozdíl od některých vyhledávacích strojů používajících WAIS nebo WWW,
může ht://Dig zastřešovat několik WWW serverů. Na typu indexovaných WWW
serverů nezáleží; stačí, aby podporovaly protokol HTTP 1.0.
</p>
-Des:
##----------------------------------------
=Pkg: hunspell 1.2.7 1.16 x86_64
=Sum: Hunspell - a spell checker and morphological analyzer library
+Des:
<!-- DT:Rich -->
<p>Hunspell is a spell checker and morphological analyzer library and
program designed for languages with rich morphology and complex word
compounding or character encoding. Hunspell interfaces: Ispell-like
terminal interface using Curses library, Ispell pipe interface,
OpenOffice.org UNO module.
</p>
-Des:
##----------------------------------------
=Pkg: hunspell-32bit 1.2.7 1.16 x86_64
=Sum: Hunspell - a spell checker and morphological analyzer library
+Des:
<!-- DT:Rich -->
<p>Hunspell is a spell checker and morphological analyzer library and
program designed for languages with rich morphology and complex word
compounding or character encoding. Hunspell interfaces: Ispell-like
terminal interface using Curses library, Ispell pipe interface,
OpenOffice.org UNO module.
</p>
-Des:
##----------------------------------------
=Pkg: hunspell-tools 1.2.7 1.16 x86_64
=Sum: Hunspell tools
+Des:
<!-- DT:Rich -->
<p>This package contains munch and unmunch programs.
</p>
-Des:
##----------------------------------------
=Pkg: hwinfo 15.43 0.5.45 x86_64
=Sum: Hardwarová knihovna
+Des:
<!-- DT:Rich -->
<p>Jednoduchý program, který vypisuje výsledky práce knihovny pro detekci
hardwaru.
</p>
-Des:
##----------------------------------------
=Pkg: hyena 0.2 0.1.145 x86_64
=Sum: Library for .NET applications
+Des:
<!-- DT:Rich -->
<p>Hyena is a .NET library that powers Banshee and PDF Mod, among others.
</p><p>
Authors:
<hr>
Aaron Bockover &lt;abockover@novell.com&gt;
Gabriel Burt &lt;gabriel.burt@gmail.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: i4l-base 2011.11.3 0.2.2.1 x86_64
=Sum: Základní programy pro práci s ISDN v Linuxu
+Des:
<!-- DT:Rich -->
<p>Tyto programy se používají pro konfiguraci a provozování ISDN
zařízení. Hlavně pro síťové spojení jsou tyto nástroje třeba.
Další programy z tohoto balíku zajišťují základní konfiguraci různých ISDN karet a kontrolu ISDN spojení.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-isdnlog 2011.11.3 0.2.2.1 x86_64
=Sum: ISDN utility pro zaznamenávání a kontrolu spojení
+Des:
<!-- DT:Rich -->
<p>Isdnlog je velice výkoný nástroj pro zaznamenávání volání na ISDN lince. Dokáže analyzovat
D-kanál a spouštět programy podle různých druhů volání. Dokáže také vytvářet statistiky
a počítat náklady za spojení včetně převodu známých čísel na jména. Obsahuje vlastní databázi
pro předvolby a ceníky mnoha poskytovatelů, takže vám pomůže udržet pod kontrolou telefonní
účty.
</p>
-Des:
##----------------------------------------
=Pkg: i4lfirm 2011.11.3 0.2.2.1 x86_64
=Sum: ISDN firmware pro aktivní ISDN karty
+Des:
<!-- DT:Rich -->
<p>Soubory s firmwarem pro aktivní ISDN karty.
</p>
-Des:
##----------------------------------------
=Pkg: ibm-data-db2 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for DB2
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Database connectivity for DB2.
</p>
-Des:
##----------------------------------------
=Pkg: icedax 1.1.8 3.32.3 x86_64
=Sum: Nástroj pro načtení hudebního CD
+Des:
<!-- DT:Rich -->
<p>The common CD-audio grabbing tool for Linux. The sources are now contained in
the wodim source archive.
</p>
-Des:
##----------------------------------------
=Pkg: icedtea-web 1.1.4 0.7.3 x86_64
=Sum: Java Web Start and plugin implementation
+Des:
<!-- DT:Rich -->
<p>The IcedTea-Web project provides a Free Software web browser plugin running
applets written in the Java programming language and an implementation of Java
Web Start, originally based on the NetX project.
</p>
-Des:
##----------------------------------------
=Pkg: icewm 1.2.36 1.35 x86_64
=Sum: Správce oken s lištou úloh
+Des:
<!-- DT:Rich -->
<p>A window manager for the X Window System that can emulate the look of Windows &#39;95,
OS/2 Warp 3, OS/2 Warp 4, and Motif and tries to take the best features from those systems.
IceWM features multiple workspaces, opaque move and resize, a taskbar, a window list,
mailbox status, and a digital clock. It is fast and small.
</p>
-Des:
##----------------------------------------
=Pkg: icewm-lite 1.2.36 1.18 x86_64
=Sum: IceWM Window Manager--Lite Version
+Des:
<!-- DT:Rich -->
<p>Window manager for the X Window System that can emulate the look of Windows 95,
OS/2 Warp 3,4, Motif. It tries to take the best features of the above systems.
It features multiple workspaces, opaque move and resize. It is fast and small.
</p><p>
The <a href="pkg://icewm-default">icewm-default</a> package features a taskbar, window list, mailbox status and digital clock in addition to that.
</p>
-Des:
##----------------------------------------
=Pkg: icu 4.0 7.26.1 x86_64
=Sum: Mezinárodní komponenty pro Unicode
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode and locale support. The library provides
calendar support, conversions for many character sets, language
sensitive collation, date and time formatting, support for many
locales, message catalogs and resources, message formatting,
normalization, number and currency formatting, time zone support,
transliteration, and word, line, and sentence breaking, etc.
</p><p>
This package contains the Unicode character database and derived
properties along with converters and time zone data.
</p><p>
This package contains the runtime libraries for ICU. It does not contain any of the data files needed at runtime and present in the
icu and icu-locales packages.
</p>
-Des:
##----------------------------------------
=Pkg: id3lib 3.8.3 175.15 x86_64
=Sum: Knihovna pro práci s ID3v1 a ID3v2 tagy
+Des:
<!-- DT:Rich -->
<p>Tento balíček poskytuje knihovnu pro práci s ID3v1 a ID3v2 značkami.
Snadné rozhraní pro vývojáře, kteří chtějí do svých programů začlenit
schopnost práce s ID3v1/2 značkami.
Vlastnosti: kontrola správnosti ID značky, automatické převody velikostí,
(de)komprese, synchronizace rámců a zarovnávání. 
</p>
-Des:
##----------------------------------------
=Pkg: idutils 4.2 20.17 x86_64
=Sum: Jazykově nezávislý nástroj pro indexaci slov
+Des:
<!-- DT:Rich -->
<p>Mkid is a simple, fast, high-capacity, and language-independent identifier database tool.  Actually, the term identifier is too limiting--mkid stores tokens, be they program identifiers of any form, literal numbers, or ordinary words.  Database queries can be issued from the command line or from within Emacs, serving as an augmented tags facility.
</p>
-Des:
##----------------------------------------
=Pkg: ifolder3 3.8.0.10050.1 0.5.10 x86_64
=Sum: Nástroj pro spolupráci a sdílení souborů
+Des:
<!-- DT:Rich -->
<p>iFolder projekt je zaměřen na sdílení a spolupráci se soubory. Je vydán pod GPL a podporuje iFolder 3 od společnosti Novell.
</p>
-Des:
##----------------------------------------
=Pkg: ifplugd 0.28 210.20 x86_64
=Sum: Rozhraní síťového démona
+Des:
<!-- DT:Rich -->
<p>ifplugd je linuxový démon pro automatické nastavení sítě po zapojení síťového
kabelu. Zajišťuje také deaktivaci sítě po odpojení kabelu. Primárně je určen pro
 uživatele notebooků. Protože je založen na nativním síťovém nastavení distribuce.
</p>
-Des:
##----------------------------------------
=Pkg: imap-lib 2006c1_suse 68.8 x86_64
=Sum: Vývojářské prostředí pro klienty IMAP4rev1/c
+Des:
<!-- DT:Rich -->
<p>Tento blík obsahuje knihovny a hlavičkové soubory pro klientské IMAP
programy.
</p>
-Des:
##----------------------------------------
=Pkg: imhangul 0.9.14 1.1.222 x86_64
=Sum: GTK+-2.0 Hangul vstupní moduly
+Des:
<!-- DT:Rich -->
<p>GTK+-2.0 Hangul vstupní moduly.
</p>
-Des:
##----------------------------------------
=Pkg: imlib 1.9.14 401.20 x86_64
=Sum: Sdílená knihovna pro zavádění a renderování 3D obrázků
+Des:
<!-- DT:Rich -->
<p>Obecná víceúčelová knihovna pro načítání a vykreslování obrázků.
V současnosti podporuje načítání 25 různých obrazových formátů.
</p><p>
Další detaily jsou uvedeny v souboru /usr/include/X11/imlib.h a v adresáři
/usr/share/doc/packages/imlib .
</p><p>
Tato sdílená knihovna je potřebná pro okenní manažer Enlightenment a pro
GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: imlib-32bit 1.9.14 401.20 x86_64
=Sum: Sdílená knihovna pro zavádění a renderování 3D obrázků
+Des:
<!-- DT:Rich -->
<p>Obecná víceúčelová knihovna pro načítání a vykreslování obrázků.
V současnosti podporuje načítání 25 různých obrazových formátů.
</p><p>
Další detaily jsou uvedeny v souboru /usr/include/X11/imlib.h a v adresáři
/usr/share/doc/packages/imlib .
</p><p>
Tato sdílená knihovna je potřebná pro okenní manažer Enlightenment a pro
GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: imlib-config 1.9.14 401.20 x86_64
=Sum: Konfigurační nástroj pro imlib
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje grafické rozhraní pro konfiguraci imlib.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2 1.4.2 2.18.53 x86_64
=Sum: Image handling and conversion library.
+Des:
<!-- DT:Rich -->
<p>Imlib2 is an advanced replacement library for libraries like libXpm that
provides many more features with much greater flexibility and speed than
standard libraries, including font rasterization, rotation, RGBA space
rendering and blending, dynamic binary filters, scripting, and more.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-loaders 1.4.2 2.18.53 x86_64
=Sum: Imlib 2 - zavaděče obrázků
+Des:
<!-- DT:Rich -->
<p>This package contains the imlib2 image loaders for: argb, bmp, gif, jpeg, png, pnm, tga, tiff, xpm
</p>
-Des:
##----------------------------------------
=Pkg: info 4.12 1.86 x86_64
=Sum: Samostatný terminálový prohlížeč info stránek
+Des:
<!-- DT:Rich -->
<p>Texinfo je konzolový program pro čtení dokumentace k programům ve formátu Info. Programy projektu GNU jsou většinou distribuovány
s dokumentací v Info formátu. Pro čtení potřebujete program &quot;Info reader&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: initviocons 0.5 55.21 x86_64
=Sum: Terminal Initialization, e.g. for the iSeries Virtual Console
+Des:
<!-- DT:Rich -->
<p>Program &#39;initviocons&#39; lze použít na platformě iSeries k rozpoznání vlastností terminálu telnetového klienta, který je připojen k virtuální konzoli (podobné sériové konzoli). Příklad viz. soubor /etc/profile.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape 0.46 62.36.10 x86_64
=Sum: Inkscape program pro práci s vektorovou grafikou
+Des:
<!-- DT:Rich -->
<p>Inkscape je program pro práci s vektorovou grafikou z prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-dia 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Dia Import Extension
+Des:
<!-- DT:Rich -->
<p>Dia import extension for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-extra 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Extra Extensions
+Des:
<!-- DT:Rich -->
<p>Extra extensions for Inkscape. Recommended for everybody who wants to use Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-fig 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Fig Import Extension
+Des:
<!-- DT:Rich -->
<p>Fig family (XFig, Figurine, JFig, WinFig,...) import extension for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-gimp 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - The GIMP Extensions
+Des:
<!-- DT:Rich -->
<p>The GIMP import and export extensions for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-lang 0.46 62.36.10 x86_64
=Sum: Inkscape program pro práci s vektorovou grafikou
+Des:
<!-- DT:Rich -->
<p>Inkscape je program pro práci s vektorovou grafikou z prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: input-utils 2007.06.22 155.33.81 x86_64
=Sum: Sada nástrojů pro vstupní zařízení
+Des:
<!-- DT:Rich -->
<p>Nástroje pro vstupní zařízení. Obashují kalibraci a testování joysticků, force feedbacku a dalších vstupních zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: insserv 1.12.0 25.8.1 x86_64
=Sum: Program pro uspořádání init skriptů
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správnou funkci a správu vašeho
systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Insserv povoluje skripty spouštěné při startu systému.
a zjišťuje závislosti mezi všemi skripty.
</p>
-Des:
##----------------------------------------
=Pkg: install-initrd 11.171 0.42.12 x86_64
=Sum: Create initrd for Installation
+Des:
<!-- DT:Rich -->
<p>Pro onstalaci si můžete vytvořit inird. Užitečné především v nastavení
UML nebo XEN prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: install-initrd-branding-SLED 11.171 0.42.12 x86_64
=Sum: SLED theme for install-initrd
+Des:
<!-- DT:Rich -->
<p>SLED theme for install-initrd package.
</p>
-Des:
##----------------------------------------
=Pkg: ipmitool 1.8.11 0.14.1 x86_64
=Sum: Utility for IPMI Control
+Des:
<!-- DT:Rich -->
<p>This package contains a utility for interfacing with devices that support
the Intelligent Platform Management Interface specification.  IPMI is
an open standard for machine health, inventory, and remote power control.
</p><p>
This utility can communicate with IPMI-enabled devices through either a
kernel driver such as OpenIPMI or over the RMCP LAN protocol defined in
the IPMI specification.  IPMIv2 adds support for encrypted LAN
communications and remote Serial-over-LAN functionality.
</p><p>
It provides commands for reading the Sensor Data Repository (SDR) and
displaying sensor values, displaying the contents of the System Event
Log (SEL), printing Field Replaceable Unit (FRU) information, reading and
setting LAN configuration, and chassis power control.
</p>
-Des:
##----------------------------------------
=Pkg: iproute2 2.6.29.1 6.22.48 x86_64
=Sum: Pokročilé směrování
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje nástroje ip, tc a rtmon potřebné pro používání
nových a zdokonalených směrovacích voleb dostupných v linuxových jádrech. SuSE Linux je používá již od verze 8.0
</p>
-Des:
##----------------------------------------
=Pkg: iptables 1.4.6 2.11.4 x86_64
=Sum: Správa filtrování IP paketů
+Des:
<!-- DT:Rich -->
<p>Iptables se používá pro konfiguraci, správu a kontrolu pravidel pro
filtrování IP paketů. Tento balík používá jádro verze 2.4.0 nebo vyšší.
</p>
-Des:
##----------------------------------------
=Pkg: iputils ss021109 292.28.1 x86_64
=Sum: Síťové nástroje pro IPv4 a IPv6
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje několik malých síťových nástrojů pro IPv4 a IPv6
jako např. rdisc, ping6, traceroute6, tracepath a tracepath6.
</p>
-Des:
##----------------------------------------
=Pkg: irda 0.9.18 196.27 x86_64
=Sum: Nezbytné nástroje pro práci s infračerveným portem
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje všechny skripty a programy nezbytné pro
zkonfigurování a používání infračerveného rozhraní pro tisk nebo
komunikaci. Startovací a ukončovací skripty jsou připraveny pro UART
emulaci (takzvaný `SIR&#39; režim) rychlostí 115 kbit/s podporovanou
většinou notebooků s infračerveným rozhraním.
</p><p>
Po spuštění správce infračerveného protokolu `irmanger&#39; příkazem
`rcirda start&#39; můžete posílat data na vaši tiskárnu použitím zařízení
/dev/irlpt0. Pokud chcete komunikovat s jinými počítači nebo mobilním
telefonem pomocí infračerveného rozhraní, můžete používat emulaci
sériového portu poskytovanou zařízením /dev/ircomm0.
</p><p>
Přečtěte si prosím soubor /usr/share/doc/packages/irda/README a
/usr/share/doc/howto/en/IR-HOWTO.gz. Jestliže infračervené rozhraní na
vašem notebooku používá jinou adresu I/O portu nebo jiné IRQ než 0x2f8
a 3 (/dev/ttyS1), musíte použít program YaST pro nastavení proměnné
IRDA_PORT a IRDA_IRQ v konfiguračním souboru /etc/rc.config.
</p>
-Des:
##----------------------------------------
=Pkg: irqbalance 0.55 120.32.1 x86_64
=Sum: Balance IRQs on SMP Machines
+Des:
<!-- DT:Rich -->
<p>irqbalance dynamically switches the CPUs for IRQs to prevent cpu0 from being used for all IRQs.
</p>
-Des:
##----------------------------------------
=Pkg: isapnp 1.26 613.17 x86_64
=Sum: Konfigurační program pro ISA plug and play karty
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dvojici programů - jeden umožňuje výpis prostředků
používaných jednotlivými kartami a vytvoření kostry konfiguračního
souboru, druhý konfiguruje ISA PnP karty pomocí konfiguračního souboru.
</p><p>
Další informace: /usr/share/doc/packages/isapnp/README.SuSE
</p>
-Des:
##----------------------------------------
=Pkg: iscsitarget 1.4.20 0.13.16 x86_64
=Sum: Otevření iSCSI klient s profesionálními funkcemi
+Des:
<!-- DT:Rich -->
<p>The aim of the project is to develop an open source iSCSI target with
professional features that works well in enterprise environment under
real workload and is scalable and versatile enough to meet the challenge
of future storage needs and developments.
</p>
-Des:
##----------------------------------------
=Pkg: iscsitarget-kmp-default 1.4.20_3.0.13_0.27 0.13.16 x86_64
=Sum: Otevření iSCSI klient s profesionálními funkcemi
+Des:
<!-- DT:Rich -->
<p>The aim of the project is to develop an open source iSCSI target with
professional features that works well in enterprise environment under
real workload and is scalable and versatile enough to meet the challenge
of future storage needs and developments.
</p>
-Des:
##----------------------------------------
=Pkg: iscsitarget-kmp-trace 1.4.20_3.0.13_0.27 0.13.16 x86_64
=Sum: Otevření iSCSI klient s profesionálními funkcemi
+Des:
<!-- DT:Rich -->
<p>The aim of the project is to develop an open source iSCSI target with
professional features that works well in enterprise environment under
real workload and is scalable and versatile enough to meet the challenge
of future storage needs and developments.
</p>
-Des:
##----------------------------------------
=Pkg: iscsitarget-kmp-xen 1.4.20_3.0.13_0.27 0.13.16 x86_64
=Sum: Otevření iSCSI klient s profesionálními funkcemi
+Des:
<!-- DT:Rich -->
<p>The aim of the project is to develop an open source iSCSI target with
professional features that works well in enterprise environment under
real workload and is scalable and versatile enough to meet the challenge
of future storage needs and developments.
</p>
-Des:
##----------------------------------------
=Pkg: ispell 3.3.02 2.7 x86_64
=Sum: Korektor překlepů
+Des:
<!-- DT:Rich -->
<p>Ispell je rychlý obrazovkově orientovaný korektor překlepů, který
vyhledává a zobrazuje chybná slova v kontextu původního souboru,
a navrhuje možné opravy, pokud je dokáže určit. V porovnání
s unixovým spellem je ispell rychlejší a snáze se používá. Ispell
může zpracovávat i jiné jazyky než angličtinu. Má dlouhou historii,
takže jeho vývoje se zúčastnilo množství lidí - mezi nejvýznamnější
vývojáře patří R. E. Gorin, Pace Willisson, Walt Buehring a Geoff
Kuenning.
</p><p>
Krátký popis programu naleznete v adresáři /usr/share/doc/packages/ispell/.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-american 3.3.02 2.7 x86_64
=Sum: Americký slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje slovníky americké a britské angličtiny pro
korektor překlepů ispell. Po instalaci tohoto balíčku bude &#39;english&#39;
americká angličtina (na rozdíl od balíčku ibritish). Krátký popis
použití programu ispell je v /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové texty pro tyto slovníky jsou obsaženy
ve zdrojovém balíčku programu ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-brazilian 1.5 364.7 x86_64
=Sum: Brazilský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready brazilian dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-british 3.3.02 2.7 x86_64
=Sum: Britský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje slovníky britské a americké angličtiny pro
korektor překlepů ispell. Po instalaci tohoto balíčku bude &#39;english&#39;
britská angličtina (na rozdíl od balíčku iamerica). Krátký popis
použití programu ispell je v /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové texty pro tyto slovníky jsou obsaženy
ve zdrojovém balíčku programu ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-catalan 1.5 364.7 x86_64
=Sum: Katalánský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje katalánský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-czech 1.5 364.7 x86_64
=Sum: Český slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje český slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-danish 1.5 364.7 x86_64
=Sum: Dánský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje dánský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-dutch 1.5 364.7 x86_64
=Sum: Holandský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje holandský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-finnish 1.5 364.7 x86_64
=Sum: Finský slovníkpro ispell
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready finnish dictionary for ispell. A short
usage description is given in /usr/share/doc/packages/ispell/README of
the packages ispell. The sources for this dictionary are included in
the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-french 1.5 364.7 x86_64
=Sum: Francouzský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>/usr/share/doc/packages/ispell/README balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-german 1.5 364.7 x86_64
=Sum: Německý slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje německý slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-hungarian 1.3 5.7 x86_64
=Sum: Maďarský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Maďarský slovník pro ispell
</p>
-Des:
##----------------------------------------
=Pkg: ispell-italian 1.5 364.7 x86_64
=Sum: Italský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje italský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-ngerman 1.5 364.7 x86_64
=Sum: Nový německý slovník pro ispel
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje německý slovník pro korektor překlepů ispell
vyhovující novým pravidlům pravopisu. Jméno slovníku je german, aby
jej bylo možné rozlišit od slovníku z balíčku igerman. Krátký popis
jeho použití je v souboru /usr/share/doc/packages/ispell/README z balíčku
ispell. Zdrojové texty pro tento slovník jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-norsk 1.5 364.7 x86_64
=Sum: Norský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje norský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell. Zdrojové soubory pro tento slovník jsou obsaženy
v balíček dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-polish 1.5 364.7 x86_64
=Sum: Polský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje polský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-portuguese 1.5 364.7 x86_64
=Sum: Portugalský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje portugalský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-russian 1.5 364.7 x86_64
=Sum: Ruský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje ruský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-slovak 0.3.2 2.7 x86_64
=Sum: Slovenský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Slovenský slovník pro ispell.
Návod najdete v
/usr/share/doc/packages/ispell/READM.
Zdroj je umístěn v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-spanish 1.5 364.7 x86_64
=Sum: Španělský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje španělský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-swedish 1.5 364.7 x86_64
=Sum: Švédský slovník pro ispell
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje švédský slovník pro korektor překlepů ispell.
Krátký popis jeho použití je v souboru /usr/share/doc/packages/ispell/README
z balíčku ispell.
Zdrojové soubory slovníku jsou obsaženy v balíčku dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ivman 0.6.14 201.31.1 x86_64
=Sum: A Generic Handler for HAL Events
+Des:
<!-- DT:Rich -->
<p>Originally for automounting, it can now be used to run arbitrary commands when events or conditions occur or properties are modified on your hardware (for example, run a command when you close your laptop&#39;s lid or run a command when a particular device is attached or a particular CD is inserted).
</p>
-Des:
##----------------------------------------
=Pkg: iw 0.9.22 2.5.95 x86_64
=Sum: Configuration utility for nl80211 based wireless drivers
+Des:
<!-- DT:Rich -->
<p>Configuration utility for nl80211 based wireless drivers
</p>
-Des:
##----------------------------------------
=Pkg: jack 1.9.7 4.5.45 x86_64
=Sum: Jack audio připojení
+Des:
<!-- DT:Rich -->
<p>JACK je zvukový server s výrazně sníženými latencemi.Dokáže spojit celou řadu různých aplikací se zvukovým zařízením, nebo umožnit společné využívání zvukových dat. Klienti mohou běžet jako samostatné aplikace, nebo také na JACK serveru (jako zásuvné moduly).
</p>
-Des:
##----------------------------------------
=Pkg: jack-32bit 1.9.7 4.5.45 x86_64
=Sum: Jack audio připojení
+Des:
<!-- DT:Rich -->
<p>JACK je zvukový server s výrazně sníženými latencemi.Dokáže spojit celou řadu různých aplikací se zvukovým zařízením, nebo umožnit společné využívání zvukových dat. Klienti mohou běžet jako samostatné aplikace, nebo také na JACK serveru (jako zásuvné moduly).
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-openjdk 1.6.0.0_b22.1.10.4 0.2.2.1 x86_64
=Sum: Java runtime environment based on OpenJDK 6 and IcedTea 6
+Des:
<!-- DT:Rich -->
<p>This Java 6 compatible Java Runtime Environment is based on OpenJDK 6 and IcedTea 6.
</p><p>
It contains a Java virtual machine, runtime class libraries, and an Java application launcher that are necessary to run programs written in the Java progamming language. It is not a development environment and does not contain development tools such as compilers and debuggers. For development tools,
see the <a href="pkg://java-1_6_0-openjdk-devel">java-1_6_0-openjdk-devel</a> package.
</p><p>
The Java 6 Runtime Environment is intended for software developers and vendors who wish to redistribute their applications.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-openjdk-demo 1.6.0.0_b22.1.10.4 0.2.2.1 x86_64
=Sum: Sources for building demo applications with OpenJDK 6
+Des:
<!-- DT:Rich -->
<p>This package provides sources of demonstration applications
for OpenJDK 6 and is intented for aspiring Java developers
which want to learn about the features of OpenJDK 6.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-openjdk-devel 1.6.0.0_b22.1.10.4 0.2.2.1 x86_64
=Sum: Java SDK based on OpenJDK 6 and IcedTea 6
+Des:
<!-- DT:Rich -->
<p>This Java 6 compatible Java SDK is based on OpenJDK 6 and IcedTea 6.
</p><p>
The Java 6 SDK is a development environment for building applications, applets, and components using the Java programming language.
</p><p>
The Java 6 SDK includes tools useful for developing and testing programs written in the Java programming language and running on the Java platform. These tools are designed to be used from the command line. Except for the appletviewer, these tools do not provide a graphical user interface.
</p>
-Des:
##----------------------------------------
=Pkg: jfsutils 1.1.12 1.18 x86_64
=Sum: IBM JFS nástroje
+Des:
<!-- DT:Rich -->
<p>Programy pro správu souborového systému IBM Journaled File System (JFS) v Linuxu.
Obsahuje následující programy:
</p><p>
o o fsck.jfs - zahajuje opakování transakce a kontroluje a opravuje JFS zařízení.
o logdump - ukládá záznam z transakcí na JFS zařízením
o logredo - opakuje transakci podle záznamu
o mkfs.jfs - vytváří JFS oddíl
o xchkdmp - ukládá obsah záznamu fsck vytvořeného programem xchklog.
o xchklog - uloží záznam o JFS do souboru
o xpeek - editor JFS souborového systému pro příkazovou řádku
</p>
-Des:
##----------------------------------------
=Pkg: joe 3.5 92.22 x86_64
=Sum: Textový editor
+Des:
<!-- DT:Rich -->
<p>JOE (Joe&#39;s Own Editor) je freewarový ASCII editor pro Unix. Podobá se
většině textových editorů pro IBM PC. Klávesové kombinace jsou podobné
ovládání editoru WordStar[tm] a prostředí Turbo C. Mezi jeho vlastnosti
patří:
<ul>
<li>plná podpora termcap/terminfo (umožňuje ovládání displeje nezávislé na
typu terminálu).
</li><li>optimalizace překreslování obrazovky na úrovni GNU Emacsu (editor Joe
lze provozovat i přes linky s rychlostí 2400 baud).
</li><li>snadná instalace
</li><li>všechny vlastnosti integrace do Unixu známé z VI: označený blok textu
může být filtrován unixovými příkazy; na místě jména souboru lze zadat:
</li></ul>
!příkaz\t\t: přesměrovat z/na jiný příkaz
</p><p>
&gt;&gt;jméno_souboru\t\t: připojit na konec existujícího souboru
</p><p>
jméno_souboru,start,velikost\t: editovat část souboru nebo zařízení
</p><p>
-\t\t\t: použít standardní vstup nebo výstup
</p><p>
Je-li v JOE otevřeno několik souborů současně, každý soubor je zobrazován
ve zvláštním okně. JOE má navíc podporu oken pro shell, v nichž je výstup
prováděných příkazů ukládán do bufferu, automatické doplňování jména
souboru (stisknutím klávesy TAB), okna s nápovědou, undo-redo, vyhledávání
a nahrazování používající regulární výrazy, atd..
</p>
-Des:
##----------------------------------------
=Pkg: jpackage-utils 1.7.5 14.6 x86_64
=Sum: JPackage nástroje
+Des:
<!-- DT:Rich -->
<p>Nástroje pro projekt JPackage &lt;http://www.jpackage.org/&gt;.
</p>
-Des:
##----------------------------------------
=Pkg: jpeg 6b 879.10 x86_64
=Sum: JPEG software od Independent JPEG Group
+Des:
<!-- DT:Rich -->
<p>Software implementuje kompresní a dekompresní algoritmus používaný pro
JPEG obrázky. JPEG (čti &quot;džejpeg&quot;) je standardizovaná komprimační metoda
pro obrázky v plných barvách (full color) a polotónové černobílé obrázky.
JPEG je určený pro komprimaci fotografií. Obrázky s velkými barevnými
plochami (např. komiksy) nejsou jeho silnou stránkou. JPEG komprese není
bezeztrátová. Pokud by vadilo, že obraz není uložen úplně přesně,
nepoužívejte formát JPEG. Pro typické fotografie JPEG dosahuje vysokých
kompresních poměrů, bez patrné ztráty kvality obrazu. Pokud nevadí nižší
kvalita obrazu, dosahuje JPEG neskutečně vysokých kompresních poměrů.
</p><p>
Podporu tvoří knihovní funkce pro čtení a zapisování JPEG souborů. Aplikace
&#39;cjpeg&#39; a &#39;djpeg&#39; používají knihovnu pro konverze mezi JPEG a jinými
populárními formáty grafických souborů. Knihovnu lze použít pro vytváření
jiných aplikací.
</p><p>
Cjpeg komprimuje vstupní soubor nebo standardní vstup, pokud nebylo zadáno
jméno souboru a výsledek ve formátu JPEG/JFIF zapisuje na standardní výstup.
Současná verze podporuje vstupní formáty PPM (PBMPLUS color format), PGM
(PBMPLUS Grayscale format), BMP, GIF, Targa a RLE (Utah Raster Toolkit
Format). RLE je podporováno, pouze pokud je dostupná RLE knihovna. Djpeg
naopak dekomprimuje JPEG soubor do jednoho z výše uvedených formátů.
</p>
-Des:
##----------------------------------------
=Pkg: jtools 1.0 571.8 x86_64
=Sum: Sada nástrojů pro manipulace s japonskými kódováními Kena Lundeho
+Des:
<!-- DT:Rich -->
<p>Sada nástrojů pro manipulace s japonskými a CJKV kódováními (autor Ken
Lunde). Sestává z:
<ul>
<li>CJKVConv.pl (CJKV konvertor kódování mezi různými locale)
</li><li>jconv, univerzální nástroj pro konverze japonských kódování
(JIS, Shift-JIS, EUC)
</li><li>jcode, nástroj pro prohlížení souborů v japonských kódováních (JIS,
Shift-JIS, EUC). Jcode zapisuje do výstupního souboru všechny znaky
ze vstupu spolu s jejich kódy. Uživatel může vybrat zobrazení
v osmičkové, desítkové nebo šestnáctkové soustavě (není-li žádná
zvolena, použije se implicitně šestnáctková).
</li><li>jchar, generátor pro různé japonské znakové sady (JIS, Shift-JIS, EUC).
</li><li>jgrep, zjednodušená varianta programu grep, která rozpoznává dvoubytové
znakové posloupnosti v japonských kódech Shift-JIS nebo EUC.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: k3b 1.0.5 48.32.32 x86_64
=Sum: Univerzální vypalovací program pro CD a DVD
+Des:
<!-- DT:Rich -->
<p>Kromě běžných funkcí pro vypalování CD podporuje k3b také Ogg Vorbis, zvukové soubory, vypalování DVD, CDDB a mnoho dalších.
</p>
-Des:
##----------------------------------------
=Pkg: k3b-lang 1.0.5 48.32.32 x86_64
=Sum: Univerzální vypalovací program pro CD a DVD
+Des:
<!-- DT:Rich -->
<p>Kromě běžných funkcí pro vypalování CD podporuje k3b také Ogg Vorbis, zvukové soubory, vypalování DVD, CDDB a mnoho dalších.
</p>
-Des:
##----------------------------------------
=Pkg: kaddressbook 4.3.5 0.6.2 x86_64
=Sum: Address Manager
+Des:
<!-- DT:Rich -->
<p>The KDE Address Book
</p>
-Des:
##----------------------------------------
=Pkg: kaffeine 0.8.7 1.34 x86_64
=Sum: Multimediální přehrávač založený na Xine
+Des:
<!-- DT:Rich -->
<p>Kaffeine přehrává všechny soubory podporované Xine.
Například soubory MPEG, AVI (pokud máte nainstalovaný kodek podporovaný Xine), MP3 a OGG vorbis. Podporuje také Video CD, DVD a DVB karty.
</p>
-Des:
##----------------------------------------
=Pkg: kaffeine-lang 0.8.7 1.34 x86_64
=Sum: Multimediální přehrávač založený na Xine
+Des:
<!-- DT:Rich -->
<p>Kaffeine přehrává všechny soubory podporované Xine.
Například soubory MPEG, AVI (pokud máte nainstalovaný kodek podporovaný Xine), MP3 a OGG vorbis. Podporuje také Video CD, DVD a DVB karty.
</p>
-Des:
##----------------------------------------
=Pkg: kalarm 4.3.5 0.6.2 x86_64
=Sum: Personal Alarm Scheduler
+Des:
<!-- DT:Rich -->
<p>Personal alarm message, command and email scheduler for KDE
</p>
-Des:
##----------------------------------------
=Pkg: kasumi 2.3 1.29 x86_64
=Sum: Slovníková nástroj pro Anthy
+Des:
<!-- DT:Rich -->
<p>Grafický nástroj pro editaci Anthy slovníků.
</p>
-Des:
##----------------------------------------
=Pkg: kate 4.3.5 0.1.73 x86_64
=Sum: Advanced Text Editor
+Des:
<!-- DT:Rich -->
<p>Kate is an advanced text editor for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kate-tools 0.4.1 11.12.18 x86_64
=Sum: A karaoke and text codec for embedding in Ogg
+Des:
<!-- DT:Rich -->
<p>Kate is a codec for karaoke and text encapsulation for Ogg. Most of the
time, this would be multiplexed with audio/video to carry subtitles,
song lyrics (with or without karaoke data), etc, but doesn&#39;t have to be.
A possible use of a lone Kate stream would be an e-book. Moreover, the
motion feature gives Kate a powerful means to describe arbitrary curves,
so hand drawing of shapes can be achieved.
</p><p>
This was originally meant for karaoke use, but can be used for any
purpose. Motions can be attached to various semantics, like position,
color, etc, so scrolling or fading text can be defined.
</p>
-Des:
##----------------------------------------
=Pkg: kaveau 0.1 0.2.74 x86_64
=Sum: Easy to use and fully integrated backup solution for KDE
+Des:
<!-- DT:Rich -->
<p>kaveau is a backup program that makes backup easy for the average user.
</p><p>
Author:
Flavio Castelli &lt;flavio@castelli.name&gt;
</p>
-Des:
##----------------------------------------
=Pkg: kbd 1.14.1 16.31.1 x86_64
=Sum: Nástroje pro klávesnici a písma
+Del:
<!-- DT:Rich -->
<p>Pokud nepoužíváte pouze americké rozložení klávesnice, je tento balíček
nezbytně nutný pro podporu vaší klávesnice na konzoli.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Nahrává a ukládá klávesové mapy. Potřebujete ho pokud používáte jinou
mapu než US. Obsahuje také nástroje pro změnu konzolových fontů. Pokud nainstalujete
tento balíček, YaST automaticky zpřístupní zvláštní nabídku pro volbu fontů.
Balíček také obsahuje konzolové fonty z kbd_fonts.tar.gz na Sunsite.
</p>
-Des:
##----------------------------------------
=Pkg: kbluetooth 0.4.2 1.4.1 x86_64
=Sum: Kdebluetooth4 is the bluetooth framework for KDE4. It adds a lot of bluetooth abilities to the KDE4 desktop.
+Des:
<!-- DT:Rich -->
<p>kdebluetooth4 offers the following:
<ul>
<li>Trayicon to manage all functions
</li><li>Passkey and Authorization Agent to handle requests from remote devices
</li><li>Bluetooth Adapter configuration
</li><li>Bluetooth Device-Manager
</li><li>Bluetooth Device Wizard, to add new Devices
</li><li>KBlueLock, to lock your screen, when your mobile phone is out of scope
</li><li>Send Files to remote devices (obex-data-server)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kcalc 4.3.5 0.1.63 x86_64
=Sum: Scientific Calculator
+Des:
<!-- DT:Rich -->
<p>KCalc is the KDE calculator tool.
</p>
-Des:
##----------------------------------------
=Pkg: kcolorchooser 4.3.5 0.2.1 x86_64
=Sum: Color Chooser
+Des:
<!-- DT:Rich -->
<p>This is an color chooser application for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdbg 2.1.0 1.26 x86_64
=Sum: Grafické uživatelské rozhraní pro GDB
+Des:
<!-- DT:Rich -->
<p>KDbg je grafické uživatelské rozhraní pro GNU debugger gdb. Poskytuje
intuitivní rozhraní pro nastavení breakpointů, prohlížení proměnných
a krokování programu.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-filesystem 4.3.5 0.2.25 x86_64
=Sum: KDE4 Directory Layout
+Des:
<!-- DT:Rich -->
<p>This package installs the KDE directory structure.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-kcm_gtk 1.1 115.30 x86_64
=Sum: Modul KDE pro nastavení stylu GTK+ aplikací
+Des:
<!-- DT:Rich -->
<p>Modul ovládacího centra KDE umožňující zvolit styl GTK+ aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-kgreeter-plugins 4.3.5 0.10.2 x86_64
=Sum: The KDE Greeter Plugin Components
+Des:
<!-- DT:Rich -->
<p>This package contains the Greeter Plugins that are needed by KDM and Screensaver unlocking
</p>
-Des:
##----------------------------------------
=Pkg: kde4-kio_beagle 0.4.0 2.30 x86_64
=Sum: KIO slave pro Beagle
+Des:
<!-- DT:Rich -->
<p>KIO slave pro Beagle umožňuje používat Beagle v Konqueroru, v dialogu otevření souboru nebo po stisknutí Alt-F2. Tato verze zatím podporuje pouze základní dotazování.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-kupdateapplet 0.8.51 0.6.1 x86_64
=Sum: openSUSE System Updater Applet (KDE4)
+Des:
<!-- DT:Rich -->
<p>KDE4 version of the openSUSE system updater applet.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-kupdateapplet-packagekit 0.8.51 0.6.1 x86_64
=Sum: packagekit plugin for KDE updater applet
+Des:
<!-- DT:Rich -->
<p>PackageKit plugin for KDE updater applet for OpenSUSE
</p>
-Des:
##----------------------------------------
=Pkg: kdeaccessibility4 4.3.5 0.1.74 x86_64
=Sum: kdeaccessibility Base Package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdeaccessibility module.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4-screensaver 4.3.5 0.3.30 x86_64
=Sum: KDE screensaver package
+Des:
<!-- DT:Rich -->
<p>This package contains screensavers for KDE which originate from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-runtime 3.5.10 20.31 x86_64
=Sum: Runtime Dependencies of KDE3 Applications
+Des:
<!-- DT:Rich -->
<p>This package contains runtime dependencies of KDE3 applications like KIO-slaves.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4 4.3.5 0.1.74 x86_64
=Sum: The Base KDE Apps
+Des:
<!-- DT:Rich -->
<p>This package contains the basic applications for a K Desktop Environment workspace.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-SLED 11 25.20.2 x86_64
=Sum: SLED KDE Extension
+Des:
<!-- DT:Rich -->
<p>This package contains the standard SLED desktop and extensions.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-SLED-lang 11 25.20.2 x86_64
=Sum: Languages for package kdebase4-SLED
+Des:
<!-- DT:Rich -->
<p>Provides translations to the package kdebase4-SLED
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-libkonq 4.3.5 0.1.74 x86_64
=Sum: KDE Konqueror Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the files used by file managers as Konqueror.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-nsplugin 4.3.5 0.1.74 x86_64
=Sum: Podpora Netscape modulů pro KDE
+Des:
<!-- DT:Rich -->
<p>This package contains support for Netscape plug-ins in konqueror. You
have to enable JavaScript for this.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-runtime 4.3.5 0.1.97 x86_64
=Sum: The KDE Runtime Components
+Des:
<!-- DT:Rich -->
<p>This package contains all run-time dependencies of KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-runtime-branding-SLED 11 25.20.2 x86_64
=Sum: The KDE Runtime Components
+Des:
<!-- DT:Rich -->
<p>This package contains all run-time dependencies of KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-runtime-xine 4.3.5 0.1.97 x86_64
=Sum: The KDE Runtime Components
+Des:
<!-- DT:Rich -->
<p>This package contains all run-time dependencies of KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-session 4.3.5 7.1.1 x86_64
=Sum: KDE sezení
+Des:
<!-- DT:Rich -->
<p>This package contains the startup scripts necessary to start a KDE session from kdm.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-workspace 4.3.5 0.10.2 x86_64
=Sum: The KDE Workspace Components
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages for a K Desktop Environment workspace.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-workspace-branding-SLED 11 25.20.2 x86_64
=Sum: SUSE rozšíření pro KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the standard SUSE desktop and extensions.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-workspace-ksysguardd 4.3.5 0.10.2 x86_64
=Sum: Základní balík KDE: ksysguard daemon
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje ksysguard  démona.
</p><p>
Program můžete nainstalovat i na počítač bez KDE, aby strážil Váš systém před ostatními počítači.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4 4.3.5 0.1.61 x86_64
=Sum: General Data for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains data which is required by the KDE games library.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics4 4.3.5 0.2.1 x86_64
=Sum: kdegraphics base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdegraphics module.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3 3.5.10 23.27.1 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje kdelibs, jednu ze základních součástí KDE.
Obsahuje knihovny pro pracovní plochu KDE.
</p><p>
Tento balík je zcela nezbytný pro používání KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-default-style 3.5.10 23.27.1 x86_64
=Sum: The default KDE style
+Des:
<!-- DT:Rich -->
<p>This package contains the Plastik widget style and libkdefx. It only depends on Qt, not the KDE libraries.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4 4.3.5 0.6.1 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages of the K Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4-branding-SLED 11 25.20.2 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages of the K Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4-core 4.3.5 0.6.1 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages of the K Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia4 4.3.5 0.2.28 x86_64
=Sum: kdemultimedia base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdemultimedia module.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork4-filesharing 4.3.5 0.4.1 x86_64
=Sum: Síťové knihovny KDE
+Des:
<!-- DT:Rich -->
<p>Knihovny požadované následujícími balíky:
</p><p>
kdenetwork3-chat
kdenetwork3-dialup
kdenetwork3-lan
kdenetwork3-mail
kdenetwork3-news
kdenetwork3-query
</p>
-Des:
##----------------------------------------
=Pkg: kdepasswd 4.3.5 0.1.74 x86_64
=Sum: KDE Password Changer
+Des:
<!-- DT:Rich -->
<p>This application allows you to change your UNIX password.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4 4.3.5 0.6.2 x86_64
=Sum: Base package of kdepim
+Des:
<!-- DT:Rich -->
<p>This package contains the core files of the kdepim module.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4-runtime 4.3.5 0.1.73 x86_64
=Sum: KDE Resources for PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE resources for Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4-wizards 4.3.5 0.6.2 x86_64
=Sum: KDE Personal Information Management Wizards
+Des:
<!-- DT:Rich -->
<p>This package contains wizards to setup groupware accounts in Kontact.
</p>
-Des:
##----------------------------------------
=Pkg: kdepimlibs4 4.3.5 0.1.68 x86_64
=Sum: KDE PIM Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages for KDE PIM applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdessh 4.3.5 0.1.63 x86_64
=Sum: Remote Application Executor
+Des:
<!-- DT:Rich -->
<p>Runs a program on a remote host
</p>
-Des:
##----------------------------------------
=Pkg: kdf 4.3.5 0.1.63 x86_64
=Sum: Show free disc space
+Des:
<!-- DT:Rich -->
<p>Gives you a graphical overview of your systems disks, mounts/unmounts
a device by clicking on its name, opens a file manager to your mount point
by clicking on it.  Also includes kwikdisk, which docks into the kpanel and
gives you quick access to all devices.
</p>
-Des:
##----------------------------------------
=Pkg: kdialog 4.3.5 0.1.74 x86_64
=Sum: A KDE "dialog" replacement
+Des:
<!-- DT:Rich -->
<p>A KDE &quot;dialog&quot; replacement. For documentation see &#39;man dialog&#39;.
Example
</p><p>
kdialog --yesno &quot;Should I really do it?&quot;
</p>
-Des:
##----------------------------------------
=Pkg: kdirstat 2.4.4 255.26 x86_64
=Sum: Grafický program pro zobrazení statistiky o volném místu na disku
+Des:
<!-- DT:Rich -->
<p>KDirStat (KDE Directory Statistics je malý program,
který zobrazuje velikost diskového prostoru
obsazeného adresářovými stromy - podobně jako unixový příkaz &#39;du&#39;.
Pomůže Vám také vyčistit disk od nepotřebných souborů.
</p>
-Des:
##----------------------------------------
=Pkg: kdm 4.3.5 0.10.2 x86_64
=Sum: KDE login and display manager
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje &#39;kdm&#39;, správce přihlášení pro KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdm-branding-SLED 11 25.20.2 x86_64
=Sum: KDE login and display manager
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje &#39;kdm&#39;, správce přihlášení pro KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdump 0.7.8 1.33.36.22 x86_64
=Sum: Script for kdump
+Des:
<!-- DT:Rich -->
<p>kdump is a package that includes several scripts for kdump, including
the init script /etc/init.d/kdump and the configuration file for kdump.
</p>
-Des:
##----------------------------------------
=Pkg: keditbookmarks 4.3.5 0.1.74 x86_64
=Sum: KDE Bookmark Editor
+Des:
<!-- DT:Rich -->
<p>This is an editor to edit your KDE-wide bookmark set.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-default 3.0.13 0.27.1 x86_64
=Sum: Standardní jádro
+Del:
<!-- DT:Rich -->
<p>The kernel is required to boot your Linux system. You can
update it, but install a new one and make it bootable before
shutting Linux down or it will not boot again without a reinstall
of the kernel.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The standard kernel for both uniprocessor and multiprocessor systems.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Toto jádro instalujte pouze pokud jste si jisti, co děláte. YaST instaluje správné jádro pro váš systém automaticky.
</p>
-Ins:
##----------------------------------------
=Pkg: kernel-default-base 3.0.13 0.27.1 x86_64
=Sum: Base Modules of the Standard Kernel
+Del:
<!-- DT:Rich -->
<p>The kernel is required to boot your Linux system. You can
update it, but install a new one and make it bootable before
shutting Linux down or it will not boot again without a reinstall
of the kernel.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The standard kernel for both uniprocessor and multiprocessor systems.
</p><p>
This package contains only the base modules, required in all installs.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Toto jádro instalujte pouze pokud jste si jisti, co děláte. YaST instaluje správné jádro pro váš systém automaticky.
</p>
-Ins:
##----------------------------------------
=Pkg: kernel-default-devel 3.0.13 0.27.1 x86_64
=Sum: Development files necessary for building kernel modules
+Des:
<!-- DT:Rich -->
<p>This package contains files necessary for building kernel modules (and kernel module packages) against the -default flavor of the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-default-extra 3.0.13 0.27.1 x86_64
=Sum: Extra Modules for the Standard Kernel
+Del:
<!-- DT:Rich -->
<p>The kernel is required to boot your Linux system. You can
update it, but install a new one and make it bootable before
shutting Linux down or it will not boot again without a reinstall
of the kernel.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The standard kernel for both uniprocessor and multiprocessor systems.
</p><p>
This package contains additional modules not supported by Novell.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Toto jádro instalujte pouze pokud jste si jisti, co děláte. YaST instaluje správné jádro pro váš systém automaticky.
</p>
-Ins:
##----------------------------------------
=Pkg: kernel-source 3.0.13 0.27.1 x86_64
=Sum: Zdrojové kódy linuxového jádra
+Des:
<!-- DT:Rich -->
<p>Zdrojové texty jádra s mnoha opravami a vylepšeními.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-syms 3.0.13 0.27.1 x86_64
=Sum: Kernel Symbol Versions (modversions)
+Des:
<!-- DT:Rich -->
<p>Kernel symbols, such as functions and variables, have version information
attached to them. This package contains the symbol versions for the standard
kernels.
</p><p>
This package is needed for compiling kernel module packages with proper package dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-trace 3.0.13 0.27.1 x86_64
=Sum: The Tracing Kernel
+Des:
<!-- DT:Rich -->
<p>The Standard Kernel - with limited tracing support enabled. This kernel is
suitable for deployment (adding minor performance overhead) when additional
monitoring is required.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-trace-base 3.0.13 0.27.1 x86_64
=Sum: The Tracing Kernel
+Des:
<!-- DT:Rich -->
<p>The Standard Kernel - with limited tracing support enabled. This kernel is
suitable for deployment (adding minor performance overhead) when additional
monitoring is required.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-trace-devel 3.0.13 0.27.1 x86_64
=Sum: The Tracing Kernel
+Des:
<!-- DT:Rich -->
<p>The Standard Kernel - with limited tracing support enabled. This kernel is
suitable for deployment (adding minor performance overhead) when additional
monitoring is required.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-trace-extra 3.0.13 0.27.1 x86_64
=Sum: The Tracing Kernel
+Des:
<!-- DT:Rich -->
<p>The Standard Kernel - with limited tracing support enabled. This kernel is
suitable for deployment (adding minor performance overhead) when additional
monitoring is required.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xen 3.0.13 0.27.1 x86_64
=Sum: Jádro pro Xen
+Des:
<!-- DT:Rich -->
<p>Linuxové jádro pro Xen virtualizaci.
</p><p>
Toto jádro lze použít jako domain0 (&quot;xen0&quot;) i jako neprivilegované jádro (&quot;xenU&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xen-base 3.0.13 0.27.1 x86_64
=Sum: The Xen Kernel - base modules
+Des:
<!-- DT:Rich -->
<p></p><p>
The Linux kernel for Xen paravirtualization.
</p><p>
This kernel can be used both as the domain0 (&quot;xen0&quot;) and as an
unprivileged (&quot;xenU&quot;) kernel.
</p><p>
This package contains only the base modules, required in all installs.
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xen-devel 3.0.13 0.27.1 x86_64
=Sum: Jádro pro Xen
+Des:
<!-- DT:Rich -->
<p>Linuxové jádro pro Xen virtualizaci.
</p><p>
Toto jádro lze použít jako domain0 (&quot;xen0&quot;) i jako neprivilegované jádro (&quot;xenU&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: kernel-xen-extra 3.0.13 0.27.1 x86_64
=Sum: The Xen Kernel - extra modules
+Des:
<!-- DT:Rich -->
<p></p><p>
The Linux kernel for Xen paravirtualization.
</p><p>
This kernel can be used both as the domain0 (&quot;xen0&quot;) and as an
unprivileged (&quot;xenU&quot;) kernel.
</p><p>
This package contains additional modules not supported by Novell.
</p>
-Des:
##----------------------------------------
=Pkg: kerneloops 0.12 30.13 x86_64
=Sum: Tool to collect kernel oopses and submit them to kerneloops.org
+Des:
<!-- DT:Rich -->
<p>kerneloops.org is a website that tries to help the developers of the Linux kernel by collecting so-called oopses, which are the crash signatures of the Linux kernel. The collected oopses are processed statistically to present information for the kernel developers, such as
<ul>
<li>Which crash signatures occur the most? (and thus need to be fixed most urgently)
</li><li>When did a certain crash signature show up first?
</li><li>Which API functions are the most error prone?
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kerry 0.2.90.svn1005337 1.2.24 x86_64
=Sum: Nástroj pro vyhledávání v systému
+Des:
<!-- DT:Rich -->
<p>Vyhledávací nástroj integrovaný s aplikací Beagle a KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kexec-tools 2.0.0 53.43.10 x86_64
=Sum: Nástroje pro rychlé zavádění jádra
+Des:
<!-- DT:Rich -->
<p>Kexec is a user space utility for loading another kernel and asking the currently running kernel to do something with it.
A currently running kernel may be asked to start the loaded kernel on reboot, or to start the loaded kernel after it panics.
</p>
-Des:
##----------------------------------------
=Pkg: keyutils 1.2 107.22 x86_64
=Sum: Linux Key Management Utilities
+Des:
<!-- DT:Rich -->
<p>Utilities to control the kernel key management facility and to provide a mechanism by which the kernel can call back to user space to get a key instantiated.
</p>
-Des:
##----------------------------------------
=Pkg: keyutils-libs 1.2 107.22 x86_64
=Sum: Key utilities library
+Des:
<!-- DT:Rich -->
<p>This package provides a wrapper library for the key management facility system calls.
</p>
-Des:
##----------------------------------------
=Pkg: keyutils-libs-32bit 1.2 107.22 x86_64
=Sum: Key utilities library
+Des:
<!-- DT:Rich -->
<p>This package provides a wrapper library for the key management facility system calls.
</p>
-Des:
##----------------------------------------
=Pkg: kfind 4.3.5 0.1.74 x86_64
=Sum: KDE Find File Utility
+Des:
<!-- DT:Rich -->
<p>KFind allows you to search for directories and files.
</p>
-Des:
##----------------------------------------
=Pkg: kfloppy 4.3.5 0.1.63 x86_64
=Sum: Floppy Formatter
+Des:
<!-- DT:Rich -->
<p>KDE Floppy Disk Utility
</p>
-Des:
##----------------------------------------
=Pkg: kgamma 4.3.5 0.2.1 x86_64
=Sum: Configure and Monitor Gamma Correction
+Des:
<!-- DT:Rich -->
<p>A KControl Center module for configuring the color balance of your monitor.
</p>
-Des:
##----------------------------------------
=Pkg: kget 4.3.5 0.4.1 x86_64
=Sum: Download Manager
+Des:
<!-- DT:Rich -->
<p>An advanced download manager for KDE
</p>
-Des:
##----------------------------------------
=Pkg: kgpg 4.3.5 0.1.63 x86_64
=Sum: Dešifrovací rozhraní pro GPG
+Des:
<!-- DT:Rich -->
<p>KGPG je malé rozhraní pro práci s GPG. Nabízí průvodece při tvorbě GPG klíčů a lze ho použít k dešifrování souborů v Konqueoru.
</p>
-Des:
##----------------------------------------
=Pkg: kinfocenter 4.3.5 0.1.74 x86_64
=Sum: KDE Information Center
+Des:
<!-- DT:Rich -->
<p>This application displays information about your system.
</p>
-Des:
##----------------------------------------
=Pkg: kinput2 v3.1 520.19 x86_64
=Sum: Server pro vstup Kanji pro X11 Window System
+Des:
<!-- DT:Rich -->
<p>Kinput2 je server pro X11 aplikace, které potřebují
japonský textový vstup.
</p>
-Des:
##----------------------------------------
=Pkg: kio_audiocd 4.3.5 0.2.28 x86_64
=Sum: KDE I/O Slave for Audio CDs
+Des:
<!-- DT:Rich -->
<p>This package contains an KIO slave to access audio CDs.
</p>
-Des:
##----------------------------------------
=Pkg: kio_ipodslave 0.8.pre2 1.26 x86_64
=Sum: Browsing iPod within KDE
+Des:
<!-- DT:Rich -->
<p>S kio_ipodslave můžete procházet svůj iPod.
K procházení zadejte &quot;ipod:/&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: kio_iso 1.99.1.svn6082 4.25 x86_64
=Sum: Správce souborů
+Des:
<!-- DT:Rich -->
<p>An advanced twin panel (commander style) file manager for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kio_kamera 4.3.5 0.2.1 x86_64
=Sum: KDE I/O-Slave for Cameras
+Des:
<!-- DT:Rich -->
<p>This package contains an KIO slave to access digital cameras.
</p>
-Des:
##----------------------------------------
=Pkg: kio_slp 0.4.1 2.15 x86_64
=Sum: SLP procházení v Konqueroru
+Des:
<!-- DT:Rich -->
<p>S kio_slp můžete procházet SLP (Service Location Protocol) síť, přesměrovávat služby nebo zjišťovat jejich atributy.
</p><p>
</p><p>
K procházení zadejte jako adresu &quot;service:/&quot;.
</p><p>
Pouze SLP prohlížeč spustíte zadáním &quot;slp:/&quot;.
</p><p>
Pokud chcete získat multicast DNS, zadejte &quot;mdns:/&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: kio_sysinfo 11 25.20.2 x86_64
=Sum: System Information KIO-Slave
+Des:
<!-- DT:Rich -->
<p>This package contains a KDE KIO-Slave showing system information.
</p>
-Des:
##----------------------------------------
=Pkg: kio_sysinfo-branding-SLED 11 25.20.2 x86_64
=Sum: System Information KIO-Slave
+Des:
<!-- DT:Rich -->
<p>This package contains a KDE KIO-Slave showing system information.
</p>
-Des:
##----------------------------------------
=Pkg: kiosktool 1.99.svn1211720 0.3.3 x86_64
=Sum: Nástroj pro nastavení Kiosk
+Des:
<!-- DT:Rich -->
<p>Nástroj pro vytváření profilů KDE prostředí.
</p>
-Des:
##----------------------------------------
=Pkg: kjots 4.3.5 0.6.2 x86_64
=Sum: Note Taker
+Des:
<!-- DT:Rich -->
<p>KDE Note Taking Utility
</p>
-Des:
##----------------------------------------
=Pkg: klogd 1.4.1 708.37.1 x86_64
=Sum: Démon logování jádra
+Des:
<!-- DT:Rich -->
<p>Démon klogd naslouchá hlášením jádra, třídí je a směruje je
 na výstup do souboru nebo démonu syslog.
</p><p>
Tato verze volitelně překládá adresy jádra do jejich
symbolických ekvivalentů.
</p>
-Des:
##----------------------------------------
=Pkg: kmag 4.3.5 0.1.74 x86_64
=Sum: Lupa pro obrazovku
+Des:
<!-- DT:Rich -->
<p>Program slouží ke zvětšení části obrazovky. Může být užitečný na
prohlídku jediného pixelu nebo pokud máte rozlišení obrazovky
2000x1600 na 14&quot; displeji a nemůžete přečíst žádný text ;-)
</p>
-Des:
##----------------------------------------
=Pkg: kmail 4.3.5 0.6.2 x86_64
=Sum: Mail Client
+Des:
<!-- DT:Rich -->
<p>KMail is the mail client of KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kmines 4.3.5 0.1.61 x86_64
=Sum: Minesweeper-like game
+Des:
<!-- DT:Rich -->
<p>KMines is the classical Minesweeper game where you have to find mines by logical deduction.
</p>
-Des:
##----------------------------------------
=Pkg: kmix 4.3.5 0.2.28 x86_64
=Sum: Sound Mixer
+Des:
<!-- DT:Rich -->
<p>KDE&#39;s full featured mini mixer
</p>
-Des:
##----------------------------------------
=Pkg: kmousetool 4.3.5 0.1.74 x86_64
=Sum: Automatic Mouse Click
+Des:
<!-- DT:Rich -->
<p>Clicks the mouse for you, reducing hand strain.
</p>
-Des:
##----------------------------------------
=Pkg: kmouth 4.3.5 0.1.74 x86_64
=Sum: Speech Synthesizer Frontend
+Des:
<!-- DT:Rich -->
<p>The computer &quot;speaks&quot; the entered text for talking with people.
</p>
-Des:
##----------------------------------------
=Pkg: knode 4.3.5 0.6.2 x86_64
=Sum: A News Reader
+Des:
<!-- DT:Rich -->
<p>KNode is a newsreader for KDE , that is supposed to be used with a local
NNTP-server (eg. leafnode).
</p>
-Des:
##----------------------------------------
=Pkg: knotes 4.3.5 0.6.2 x86_64
=Sum: Popup Notes
+Des:
<!-- DT:Rich -->
<p>KNotes is a note taking application for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kompozer 0.7.99.0.4 1.1 x86_64
=Sum: Web Authoring System
+Des:
<!-- DT:Rich -->
<p>A complete Web authoring system for Linux Desktop users, similar to Microsoft Windows programs like FrontPage and Dreamweaver.
</p><p>
KompoZer is an unofficial branch of Nvu, previously developed by Linspire Inc.
</p><p>
It makes managing a Web site a snap. Now anyone can create Web pages and manage a Web site with no technical expertise or HTML knowledge.
</p><p>
Features
<ul>
<li>WYSIWYG editing of pages, making Web creation as easy as typing a letter with your word processor.

</li><li>Integrated file management via FTP.  Simply log in to your Web site and navigate through your files, editing Web pages on the fly, directly from your site.

</li><li>Reliable HTML code creation that works with today&#39;s most popular browsers.

</li><li>Jump between WYSIWYG editing mode and HTML using tabs.

</li><li>Tabbed editing to make working on multiple pages a snap.

</li><li>Powerful support for frames, forms, tables, and templates.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: konqueror 4.3.5 0.1.74 x86_64
=Sum: KDE File Manager and Browser
+Des:
<!-- DT:Rich -->
<p>Konqueror allows you to manage your files and browse the web in a unified interface.
</p>
-Des:
##----------------------------------------
=Pkg: konqueror-plugins 4.3.1 1.1.98 x86_64
=Sum: Konqueror Related Addons
+Des:
<!-- DT:Rich -->
<p>This package contains web-related and file-related Konqueror plugins.
</p>
-Des:
##----------------------------------------
=Pkg: konqueror-plugins-lang 4.3.1 1.1.98 x86_64
=Sum: Konqueror Related Addons
+Des:
<!-- DT:Rich -->
<p>This package contains web-related and file-related Konqueror plugins.
</p>
-Des:
##----------------------------------------
=Pkg: konsole 4.3.5 0.1.74 x86_64
=Sum: KDE Terminal
+Des:
<!-- DT:Rich -->
<p>Konsole is a terminal emulator for the K Desktop Environment.
</p>
-Des:
##----------------------------------------
=Pkg: kontact 4.3.5 0.6.2 x86_64
=Sum: PIM - personal information manager
+Des:
<!-- DT:Rich -->
<p>Kontact combines the individual applications KMail, KAddressBook and KOrganizer under one GUI.
</p>
-Des:
##----------------------------------------
=Pkg: kopete 4.3.5 0.4.1 x86_64
=Sum: An Instant Messenger for ICQ, IRC, AIM, and MSN
+Des:
<!-- DT:Rich -->
<p>Kopete can handle several instant messenger protocols due to its plug-in system. You can can contact your friends via AIM(AOL), ICQ, MSN, or IRC.
</p>
-Des:
##----------------------------------------
=Pkg: korganizer 4.3.5 0.6.2 x86_64
=Sum: Personal Organizer
+Des:
<!-- DT:Rich -->
<p>KOrganizer is a calendar application for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kpartx 0.4.9 0.60.1 x86_64
=Sum: Manages partition tables on device-mapper devices
+Des:
<!-- DT:Rich -->
<p>The kpartx program maps linear devmaps to device partitions, which makes multipath maps partionable.
</p>
-Des:
##----------------------------------------
=Pkg: kpat 4.3.5 0.1.61 x86_64
=Sum: Patience card game
+Des:
<!-- DT:Rich -->
<p>KPatience is a collection of various patience games known all over the world. It includes Klondike, Freecell, Yukon, Forty and Eight and many more. The game has nice graphics and many different carddecks.
</p>
-Des:
##----------------------------------------
=Pkg: kppp 4.3.5 0.4.1 x86_64
=Sum: Internet Dial-Up Tool
+Des:
<!-- DT:Rich -->
<p>A dialer and front-end to pppd
</p>
-Des:
##----------------------------------------
=Pkg: krb5 1.6.3 133.48.48.1 x86_64
=Sum: Implementace MIT Kerberos5 -- knihovny
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 je ověřovací systém, který zvýší bezpečnost vaší sítě
eliminací používání čistě textových hesel.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-32bit 1.6.3 133.48.48.1 x86_64
=Sum: Implementace MIT Kerberos5 -- knihovny
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 je ověřovací systém, který zvýší bezpečnost vaší sítě
eliminací používání čistě textových hesel.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-client 1.6.3 133.48.48.1 x86_64
=Sum: MIT Kerberos5 implementation - client programs
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 je ověřovací systém třetí strany,
který zvýší bezpečnost vaší sítě omezením nevhodných
hesel v čistě textové podobě.
Tento balíček obsahuje klientské programy.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-ticket-watcher 1.0.1 13.16.21 x86_64
=Sum: Applet pro sledování Kerberos lístků
+Des:
<!-- DT:Rich -->
<p>A tray applet for watching, renewing, and reinitializing Kerberos tickets.
</p>
-Des:
##----------------------------------------
=Pkg: krdc 4.3.5 0.4.1 x86_64
=Sum: Remote Desktop Connection
+Des:
<!-- DT:Rich -->
<p>Krdc allows to connect to VNC and RDP compatible servers.
</p>
-Des:
##----------------------------------------
=Pkg: krecord 1.16 220.26 x86_64
=Sum: Zvukový rekordér
+Des:
<!-- DT:Rich -->
<p>Zaznamenává zvuk ze zvukové karty a ukládá jej do WAV souboru.
</p>
-Des:
##----------------------------------------
=Pkg: krfb 4.3.5 0.4.1 x86_64
=Sum: Desktop Sharing
+Des:
<!-- DT:Rich -->
<p>VNC-compatible server to share KDE desktops.
</p>
-Des:
##----------------------------------------
=Pkg: kruler 4.3.5 0.2.1 x86_64
=Sum: Screen ruler
+Des:
<!-- DT:Rich -->
<p>A Pixel based ruler for the screen to measure dimensions of
windows or other things.
</p>
-Des:
##----------------------------------------
=Pkg: kscd 4.3.5 0.2.28 x86_64
=Sum: CD Player
+Des:
<!-- DT:Rich -->
<p>KDE&#39;s CD Player
</p>
-Des:
##----------------------------------------
=Pkg: kscpm 0.5.4 143.27 x86_64
=Sum: KDE podpora SCPM
+Des:
<!-- DT:Rich -->
<p>Tento balíčak obsahuje dodatečnou podporu správy profilů SCPM pro KDE. Obsahuje applet pro panel, který umožňuje zvolit požadovaný profil a aplikaci provádějící přepnutí. Lze nastavit i na provádění dodatečných příkazů.
</p>
-Des:
##----------------------------------------
=Pkg: ksh 93u 0.6.1 x86_64
=Sum: Korn shell
+Des:
<!-- DT:Rich -->
<p>The original Korn Shell.  The ksh is an sh-compatible command interpreter
that executes commands read from standard input or from a file.
</p>
-Des:
##----------------------------------------
=Pkg: ksnapshot 4.3.5 0.2.1 x86_64
=Sum: Screen Capture Program
+Des:
<!-- DT:Rich -->
<p>A screenshot utility for KDE
</p>
-Des:
##----------------------------------------
=Pkg: ksudoku 4.3.5 0.1.61 x86_64
=Sum: Vytváření a řešení sudoku v 2D a 3D
+Des:
<!-- DT:Rich -->
<p>KSudoku je program, který generuje a řeší sudoku.
</p>
-Des:
##----------------------------------------
=Pkg: ksymoops 2.4.11 117.22 x86_64
=Sum: Dekodér chybových hlášení jádra
+Des:
<!-- DT:Rich -->
<p>Linuxové jádro vytváří chybová hlášení, která obsahují čísla bez zjevného významu.
ksymoops načítá tyto informace ze souboru a chybového protokolu a konvertuje
adresy na informace ve stravitelnějším formátu.
</p>
-Des:
##----------------------------------------
=Pkg: kteatime 4.3.5 0.1.74 x86_64
=Sum: A little tea timer for your panel
+Des:
<!-- DT:Rich -->
<p>Reminds you when your tea is ready to drink. You can set different actions when the time is over.
</p>
-Des:
##----------------------------------------
=Pkg: ktimetracker 4.3.5 0.6.2 x86_64
=Sum: Personal Time Tracker
+Des:
<!-- DT:Rich -->
<p>KTimeTracker tracks time spent on various tasks.
</p>
-Des:
##----------------------------------------
=Pkg: ktoblzcheck 1.19 1.15 x86_64
=Sum: Library to check account numbers and bank codes of German banks documents
+Des:
<!-- DT:Rich -->
<p>KtoBLZCheck is a library to check account numbers and bank codes of
German banks. Both a library for other programs as well as a short
command-line tool is available. It is possible to check pairs of
account numbers and bank codes (BLZ) of German banks, and to map bank
codes (BLZ) to the clear-text name and location of the bank.
</p>
-Des:
##----------------------------------------
=Pkg: ktorrent 3.1.5 2.32 x86_64
=Sum: KDE klient pro BitTorrent
+Des:
<!-- DT:Rich -->
<p>Torrent je BitTorrent program pro KDE. Jeho hlavní funkce jsou:
Torrent je BitTorrent program pro KDE. Jeho hlavní funkce jsou:<ul>
<li>stahování torrentů
</li><li>nastavování rychlosti stahování
</li><li>vyhledávání torrentů na webu
</li><li>UDP trackery
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ktorrent-lang 3.1.5 2.32 x86_64
=Sum: KDE klient pro BitTorrent
+Des:
<!-- DT:Rich -->
<p>Torrent je BitTorrent program pro KDE. Jeho hlavní funkce jsou:
Torrent je BitTorrent program pro KDE. Jeho hlavní funkce jsou:<ul>
<li>stahování torrentů
</li><li>nastavování rychlosti stahování
</li><li>vyhledávání torrentů na webu
</li><li>UDP trackery
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kttsd 4.3.5 0.1.74 x86_64
=Sum: Text-to-Speech
+Des:
<!-- DT:Rich -->
<p>The KDE Text To Speech Daemon, which can be used from any KDE application that uses the interface from kdelibs.
</p>
-Des:
##----------------------------------------
=Pkg: ktux 4.3.5 0.1.74 x86_64
=Sum: Tux Screen Saver
+Des:
<!-- DT:Rich -->
<p>This package contains a screen saver showing Tux in space.
</p>
-Des:
##----------------------------------------
=Pkg: kvm 0.15.1 0.17.3 x86_64
=Sum: Kernel-based Virtual Machine
+Des:
<!-- DT:Rich -->
<p>KVM (Kernel-based Virtual Machine) is virtualization software for Linux.
It is based on the hardware virtualization extensions provided by Intel VT
and AMD-V technologies. KVM kernel modules provide a control interface at
/dev/kvm which the qemu-kvm user-space program uses to provide a hybrid
emulated and actual hardware environment sufficent to run various PC
operating systems (guests) in unmodified form, including Linux, Windows,
and Mac OS X.
</p><p>
Since qemu-kvm is derived from the <a href="pkg://qemu">qemu</a> processor emulator sources it also
is able to run guests using processor emulation mode, but with the expected
performance impact. Conversely, hardware virtualization features outside
the processor such as iommu and sr-iov are used by KVM allowing for improved
performance.
</p><p>
The seabios, vgabios and ipxe open source projects are also pulled from to
provide the firmware components included.
</p><p>
To increase performance over emulated hardware devices virtio drivers are
supported, and in the case of Windows, included.
</p><p>
KVM is compatible with various VM management solutions, including <a href="pkg://libvirt">libvirt</a>,
<a href="pkg://virt-manager">virt-manager</a> and
<a href="pkg://vm-install">vm-install</a>.
</p>
-Des:
##----------------------------------------
=Pkg: kwalletmanager 4.3.5 0.1.63 x86_64
=Sum: Wallet Management Tool
+Des:
<!-- DT:Rich -->
<p>This application allows you to manage your KDE password wallet.
</p>
-Des:
##----------------------------------------
=Pkg: kwikdisk 4.3.5 0.1.63 x86_64
=Sum: Removable Media Utility
+Des:
<!-- DT:Rich -->
<p>This utility allows you to manage removable media.
</p>
-Des:
##----------------------------------------
=Pkg: kwin 4.3.5 0.10.2 x86_64
=Sum: The KDE Workspace Components
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages for a K Desktop Environment workspace.
</p>
-Des:
##----------------------------------------
=Pkg: kwrite 4.3.5 0.1.74 x86_64
=Sum: KDE Text Editor
+Des:
<!-- DT:Rich -->
<p>KWrite is the default text editor of the K desktop environment.
</p>
-Des:
##----------------------------------------
=Pkg: lcms 1.17 77.14.19 x86_64
=Sum: Utilities for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>Little cms is a small speed optimized color management engine.
</p>
-Des:
##----------------------------------------
=Pkg: lcrash 7.0.1_1434 1.22 x86_64
=Sum: Utility pro Linux Kernel Crash Dump (LKCD)
+Des:
<!-- DT:Rich -->
<p>Tento softwarový balík obsahuje utility pro analýzu paměti po pádu
systému (dump). Zahrnuje Linux Crash (lcrash) a všechny odpovídající
skripty pro konfiguraci ukládání souborů dump.
</p>
-Des:
##----------------------------------------
=Pkg: less 424b 10.22 x86_64
=Sum: Text File Browser and Pager Similar to more
+Del:
<!-- DT:Rich -->
<p>This package is not required, although it is strongly recommended.
</p><p>
Remove this package only if you know what
you are doing.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>less is a text file browser and pager similar to more.
It allows backward as well as forward movement within a file.
Also, less does not have to read the entire input file before
starting. It is possible to start an editor at any time from
within less.
</p>
-Des:
##----------------------------------------
=Pkg: lha 1.14.0.894 1.22 x86_64
=Sum: Pack program
+Des:
<!-- DT:Rich -->
<p>Lha je komprimační program podobný programu ZIP (PKZIP), ZOO apod..
V Linuxu se pro komprimaci standardně používá program gzip, program
lha slouží zejména pro rozbalování archivů vytvořených v jiných
operačních systémech.
</p>
-Des:
##----------------------------------------
=Pkg: lib3ds-1-3 1.3.0 2.8 x86_64
=Sum: Import and Export of Autodesk 3DS Files
+Des:
<!-- DT:Rich -->
<p>Lib3ds is a free alternative to Autodesk&#39;s 3DS File Toolkit for handling
3DS files. Its main goal is to simplify the creation of 3DS import and
export filters.
</p>
-Des:
##----------------------------------------
=Pkg: libFLAC++6 1.2.1 68.15 x86_64
=Sum: Free Lossless Audio Codec Library
+Des:
<!-- DT:Rich -->
<p>This package contains the C++ library for FLAC (Free Lossless Audio Codec) developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: libFLAC8 1.2.1 68.15 x86_64
=Sum: Free Lossless Audio Codec Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library for FLAC (Free Lossless Audio Codec) developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: libFLAC8-32bit 1.2.1 68.15 x86_64
=Sum: Free Lossless Audio Codec Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library for FLAC (Free Lossless Audio Codec) developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: libHX13 1.23 4.1.1 x86_64
=Sum: General-purpose Library
+Des:
<!-- DT:Rich -->
<p>A Library for:
<ul>
<li>A+R/B trees to use for lists or maps (associative arrays)
</li><li>Deques (double-ended queues) (Stacks (LIFO) / Queues (FIFOs))
</li><li>platform independent opendir-style directory access
</li><li>platform independent dlopen-style shared library access
</li><li>auto-storage strings with direct access
</li><li>command line option (argv) parser
</li><li>shell-style config file parser
</li><li>platform independent random number generator with transparent
/dev/urandom support
</li><li>various string, memory and zvec ops
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libHX13-32bit 1.23 4.1.1 x86_64
=Sum: General-purpose Library
+Des:
<!-- DT:Rich -->
<p>A Library for:
<ul>
<li>A+R/B trees to use for lists or maps (associative arrays)
</li><li>Deques (double-ended queues) (Stacks (LIFO) / Queues (FIFOs))
</li><li>platform independent opendir-style directory access
</li><li>platform independent dlopen-style shared library access
</li><li>auto-storage strings with direct access
</li><li>command line option (argv) parser
</li><li>shell-style config file parser
</li><li>platform independent random number generator with transparent
/dev/urandom support
</li><li>various string, memory and zvec ops
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libMagick++1 6.4.3.6 7.22.1 x86_64
=Sum: C++ rozhraní pro ImageMagick - běhová knihovna
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje Magick++, objektově orientované API pro C++ ke knihovně
na zpracování obrázků ImageMagick.
</p><p>
Magick++ podporuje objektový model, který je inspirován programem PerlMagick.
Je o něco rychlejší než PerlMagick, protože je napsaný v kompilovaném
jazyce, který není analyzován v době běhu. Proto je vhodný pro WWW CGI
programy. Podpora obrázků implicitně počítá s odkazy, takže kopírovací
konstruktory a přiřazení téměř nic nestojí. Ke skutečnému kopírování
obrázku dochází pouze před jeho modifikací a je Magickem++ prováděno
automaticky. Dereferencované kopie jsou automaticky rušeny. Obrazové
objekty podporují hodnotovou (a nikoli ukazatelovou) sémantiku, takže
je jednoduché mít více generací obrázku v paměti současně.
</p>
-Des:
##----------------------------------------
=Pkg: libMagickCore1-32bit 6.4.3.6 7.22.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>ImageMagic je bohatá sbírka nástrojů a knihoven pro čtení/zápis a
manipulaci s obrázky v mnoha formátech včetně TIFF, JPEG, PNG, PDF,
PhotoCD a GIF. S ImageMagic můžete dynamicky vytvářet obrázky vhodné
pro webové aplikace. V programu lze měnit rozlišení, otáčet, ostřit, měnit
barevnost nebo přidat zvláštní efekty a ukládat v mnoha formátech.
Zpracování obrázků lze spouštět z příkazové řádky nebo volat funkce z
C, C++ a PERLu.
</p>
-Des:
##----------------------------------------
=Pkg: libMagickCore1 6.4.3.6 7.22.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>ImageMagic je bohatá sbírka nástrojů a knihoven pro čtení/zápis a
manipulaci s obrázky v mnoha formátech včetně TIFF, JPEG, PNG, PDF,
PhotoCD a GIF. S ImageMagic můžete dynamicky vytvářet obrázky vhodné
pro webové aplikace. V programu lze měnit rozlišení, otáčet, ostřit, měnit
barevnost nebo přidat zvláštní efekty a ukládat v mnoha formátech.
Zpracování obrázků lze spouštět z příkazové řádky nebo volat funkce z
C, C++ a PERLu.
</p>
-Des:
##----------------------------------------
=Pkg: libMagickWand1 6.4.3.6 7.22.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>ImageMagic je bohatá sbírka nástrojů a knihoven pro čtení/zápis a
manipulaci s obrázky v mnoha formátech včetně TIFF, JPEG, PNG, PDF,
PhotoCD a GIF. S ImageMagic můžete dynamicky vytvářet obrázky vhodné
pro webové aplikace. V programu lze měnit rozlišení, otáčet, ostřit, měnit
barevnost nebo přidat zvláštní efekty a ukládat v mnoha formátech.
Zpracování obrázků lze spouštět z příkazové řádky nebo volat funkce z
C, C++ a PERLu.
</p>
-Des:
##----------------------------------------
=Pkg: libQtWebKit4-32bit 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libQtWebKit4 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libRaTools0 0.5.5 4.22 x86_64
=Sum: SBLIM Common Resource Access Library for WBEM-SMT tasks
+Des:
<!-- DT:Rich -->
<p>The tools-libra package provides common functionality required by
the task-specific resource access layers of wbem-smt tasks such as
cmpi-dns and cmpi-samba.
</p>
-Des:
##----------------------------------------
=Pkg: libSoundTouch0 1.6.0 1.5.18 x86_64
=Sum: Audio Processing Library
+Des:
<!-- DT:Rich -->
<p>SoundTouch is an open source audio processing library that allows changing the sound tempo, pitch and playback rate parameters independently from each other.
</p>
-Des:
##----------------------------------------
=Pkg: libSoundTouch0-32bit 1.6.0 1.5.18 x86_64
=Sum: Audio Processing Library
+Des:
<!-- DT:Rich -->
<p>SoundTouch is an open source audio processing library that allows changing the sound tempo, pitch and playback rate parameters independently from each other.
</p>
-Des:
##----------------------------------------
=Pkg: libXiterm 0.5.20040304 259.27 x86_64
=Sum: Terminal emulator Xaw widget library based on libiterm
+Des:
<!-- DT:Rich -->
<p>Terminal emulator Xaw widget library based on libiterm
</p>
-Des:
##----------------------------------------
=Pkg: libacl 2.2.47 30.34.29 x86_64
=Sum: Dynamická knihovna pro práci s POSIX ACLs
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dynamickou knihovnu libacl.so, která poskytuje funkce
podle POSIX 1003.1e draft standard 17 pro manipulaci s ACL atributy.
</p>
-Des:
##----------------------------------------
=Pkg: libacl-32bit 2.2.47 30.34.29 x86_64
=Sum: Dynamická knihovna pro práci s POSIX ACLs
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dynamickou knihovnu libacl.so, která poskytuje funkce
podle POSIX 1003.1e draft standard 17 pro manipulaci s ACL atributy.
</p>
-Des:
##----------------------------------------
=Pkg: libadns1 1.4 73.21 x86_64
=Sum: Advanced DNS resolver client library
+Des:
<!-- DT:Rich -->
<p>Libadns is an advanced, easy to use, asynchronous-capable DNS resolver client library for C (and C++) programs.
</p>
-Des:
##----------------------------------------
=Pkg: libaio 0.3.109 0.1.46 x86_64
=Sum: Linux-Native Asynchronous I/O Access Library
+Des:
<!-- DT:Rich -->
<p>The Linux-native asynchronous I/O facility (&quot;async I/O&quot;, or &quot;aio&quot;) has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
</p>
-Des:
##----------------------------------------
=Pkg: libakonadi4 4.3.5 0.1.68 x86_64
=Sum: PIM Storage Service Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries of Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: libakonadiprotocolinternals1 1.2.1 1.1.87 x86_64
=Sum: PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the data files of Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: libao 0.8.8 81.27 x86_64
=Sum: A Cross-Platform Audio Output Library
+Des:
<!-- DT:Rich -->
<p>Libao je knihovna pro audio výstup pro mnoho platforem. V současnosti
podporuje ESD, OSS, Solaris a IRIX.
</p>
-Des:
##----------------------------------------
=Pkg: libapparmor1 2.5.1.r1445 55.57.47 x86_64
=Sum: Utility library for AppArmor
+Des:
<!-- DT:Rich -->
<p>This package provides the libapparmor library, which contains the change_hat(2)
symbol, used for sub-process confinement by AppArmor, as well as functions to parse AppArmor log messages.
</p>
-Des:
##----------------------------------------
=Pkg: libapparmor1-32bit 2.5.1.r1445 55.57.47 x86_64
=Sum: Utility library for AppArmor
+Des:
<!-- DT:Rich -->
<p>This package provides the libapparmor library, which contains the change_hat(2)
symbol, used for sub-process confinement by AppArmor, as well as functions to parse AppArmor log messages.
</p>
-Des:
##----------------------------------------
=Pkg: libarchive2 2.5.5 5.19 x86_64
=Sum: Programming Library To Create And Read Several Different Streaming Archive Formats
+Des:
<!-- DT:Rich -->
<p>Libarchive is a programming library that can create and read several different
streaming archive formats, including most popular tar variants and several cpio
formats. It can also write shar archives and read ISO9660 CDROM images. The
bsdtar program is an implementation of tar(1) that is built on top of
libarchive. It started as a test harness, but has grown and is now the standard
system tar for FreeBSD 5 and 6.
</p><p>
The libarchive library offers a number of features that make it both very flexible and very powerful.
<ul>
<li>Automatic format detection: libarchive can automatically determine both
the compression and the archive format, regardless of the data source.
Most tar implementations do not automatically detect the compression format,
few implementation that can correctly do this when reading from stdin or a
socket. (The tar program included with Gunnar Ritter&#39;s heirloom collection also
does full automatic format detection.)
</li><li>Writes POSIX formats: libarchive writes POSIX-standard formats, including
&quot;ustar,&quot; &quot;pax interchange format,&quot; and the POSIX &quot;cpio&quot; format.
</li><li>Supports pax interchange format: Pax interchange format (which, despite
the name, is really an extended tar format) eliminates almost all
limitations of historic tar formats and provides a standard method for
incorporating vendor-specific extensions. libarchive exploits this extension
mechanism to support ACLs and file flags, for example. (Joerg Schilling&#39;s star
archiver is another open-source tar program that supports pax interchange
format.)
</li><li>Reads popular formats: libarchive can read GNU tar, ustar, pax
interchange format, cpio, and older tar variants. The internal
architecture is easily extensible. The only requirement for support is that it
be possible to read the format without seeking in the file. (For example, a
format that includes a compressed size field before the data cannot be
correctly written without seeking.)
</li><li>High-Level API: the libarchive API makes it fairly simple to build an
archive from a list of filenames or to extract the entries from an
archive. However, the API also provides extreme flexibility with regards to
data sources. For example, there are generic hooks that allow you to write an
archive to a socket or read data from an archive entry into a memory buffer.
</li><li>Extensible. The internal design uses generic interfaces for compression,
archive format detection and decoding, and archive data I/O. It should be
very easy to add new formats, new compression methods, or new ways of
reading/writing archives.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl 2.3.20 46.16.43 x86_64
=Sum: Libart Components Licensed under the LGPL
+Des:
<!-- DT:Rich -->
<p>Libart je knihovna pro výkonnou 2D grafiku. Používá se v současnosti např. jako renderovací server s antialiasingem pro Gnome Canvas. Kromě toho se také stará o renderování Gill, což je kreslící program GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl-32bit 2.3.20 46.16.43 x86_64
=Sum: Libart Components Licensed under the LGPL
+Des:
<!-- DT:Rich -->
<p>Libart je knihovna pro výkonnou 2D grafiku. Používá se v současnosti např. jako renderovací server s antialiasingem pro Gnome Canvas. Kromě toho se také stará o renderování Gill, což je kreslící program GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl-devel 2.3.20 46.16.43 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p>Hlavičkové soubory a knihovny pro vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: libasm1 0.152 4.7.86 x86_64
=Sum: A collection of utilities and DSOs to handle compiled objects
+Des:
<!-- DT:Rich -->
<p>Elfutils is a collection of utilities, including ld (a linker), nm (for listing symbols from object files), size (for listing the section sizes of an object or archive file), strip (for discarding symbols), readline (the see the raw ELF file structures), and elflint (to check for well-formed ELF files).  Also included are numerous helper libraries which implement DWARF, ELF, and machine-specific ELF
handling.
</p>
-Des:
##----------------------------------------
=Pkg: libasound2 1.0.18 16.24.1 x86_64
=Sum: Advanced Linux Sound Architecture Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library for ALSA, Advanced Linux Sound Architecture.
</p>
-Des:
##----------------------------------------
=Pkg: libasound2-32bit 1.0.18 16.24.1 x86_64
=Sum: Advanced Linux Sound Architecture Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library for ALSA, Advanced Linux Sound Architecture.
</p>
-Des:
##----------------------------------------
=Pkg: libass4 0.9.12 1.5.17 x86_64
=Sum: Portable Library for SSA/ASS Subtitles Rendering
+Des:
<!-- DT:Rich -->
<p>libass is a portable subtitle renderer for the ASS/SSA
(Advanced Substation Alpha/Substation Alpha) subtitle
format. It is mostly compatible with VSFilter.
</p>
-Des:
##----------------------------------------
=Pkg: libatk-1_0-0 1.28.0 1.2.28 x86_64
=Sum: Sada nástrojů s přístupovými funkcemi
+Des:
<!-- DT:Rich -->
<p>Šikovná knihovna s sadou přístupových funkcí. Pokud použijete ATK rozhraní, program nebo sada nástrojů může používat lupu, čtečku obrazovky a alternativní vstupní zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: libatk-1_0-0-32bit 1.28.0 1.2.28 x86_64
=Sum: Sada nástrojů s přístupovými funkcemi
+Des:
<!-- DT:Rich -->
<p>Šikovná knihovna s sadou přístupových funkcí. Pokud použijete ATK rozhraní, program nebo sada nástrojů může používat lupu, čtečku obrazovky a alternativní vstupní zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: libattr 2.4.43 1.18 x86_64
=Sum: Dynamická knihovna pro práci s rozšířenými atributy (extended attribute)
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dynamickou knihovnu libattr.so.
Nabízí systémová volání a funkce pro práci s Extended attributes.
</p>
-Des:
##----------------------------------------
=Pkg: libattr-32bit 2.4.43 1.18 x86_64
=Sum: Dynamická knihovna pro práci s rozšířenými atributy (extended attribute)
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje dynamickou knihovnu libattr.so.
Nabízí systémová volání a funkce pro práci s Extended attributes.
</p>
-Des:
##----------------------------------------
=Pkg: libaugeas0 0.8.1 7.8.2 x86_64
=Sum: A library for changing configuration files
+Des:
<!-- DT:Rich -->
<p>A library for programmatically editing configuration files. Augeas parses
configuration files into a tree structure, which it exposes through its
public API. Changes made through the API are written back to the initially
read files.
</p><p>
The transformation works very hard to preserve comments and formatting
details. It is controlled by ``lens&#39;&#39; definitions that describe the file
format and the transformation into a tree.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-client3 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-client3-32bit 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-common3 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-common3-32bit 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-core5 0.6.23 11.19.22 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-glib1 0.6.23 13.19.26 x86_64
=Sum: Glib Bindings for avahi, the D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>GLib support for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-glib1-32bit 0.6.23 13.19.26 x86_64
=Sum: Glib Bindings for avahi, the D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>GLib support for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-gobject0 0.6.23 13.19.26 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-ui0 0.6.23 13.19.26 x86_64
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-0 0.5.3 131.15 x86_64
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 je programovací rozhraní pro AV/C od 1394 Trade Assocation. 
AV/C znamená Audio/Video Control. Programy momentálně používají tuto knihovnu
pro ovládání přenosu dat z pásky na DV kameře. Přes AV/C ale můžete ovládat i mnoho
dalších funkcí a zařízení. Tato knihovna je vylepšována, aby nakonec podporovala více
specifikací a poskytovala vysoko úrovňové rozhraní pro různá zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-0-32bit 0.5.3 131.15 x86_64
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 je programovací rozhraní pro AV/C od 1394 Trade Assocation. 
AV/C znamená Audio/Video Control. Programy momentálně používají tuto knihovnu
pro ovládání přenosu dat z pásky na DV kameře. Přes AV/C ale můžete ovládat i mnoho
dalších funkcí a zařízení. Tato knihovna je vylepšována, aby nakonec podporovala více
specifikací a poskytovala vysoko úrovňové rozhraní pro různá zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394 0.5.3 131.15 x86_64
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 je programovací rozhraní pro AV/C od 1394 Trade Assocation. 
AV/C znamená Audio/Video Control. Programy momentálně používají tuto knihovnu
pro ovládání přenosu dat z pásky na DV kameře. Přes AV/C ale můžete ovládat i mnoho
dalších funkcí a zařízení. Tato knihovna je vylepšována, aby nakonec podporovala více
specifikací a poskytovala vysoko úrovňové rozhraní pro různá zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: libbabl-0_0-0 0.0.22 4.22 x86_64
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle1 0.3.5.1 7.27 x86_64
=Sum: Beagle C Interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libblkid1 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: libblkid1-32bit 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: libblocxx6 2.1.0.342 122.6 x86_64
=Sum: BloCXX--C++ framework pro vývoj aplikací
+Des:
<!-- DT:Rich -->
<p>BloCXX je obecný C++ framework pro vývoj aplikací. Tento balík obsahuje knihovnu BloCXX.
</p>
-Des:
##----------------------------------------
=Pkg: libbluetooth3 4.51 1.12.31 x86_64
=Sum: Bluetooth knihovny
+Des:
<!-- DT:Rich -->
<p>Bluetooth protokol stack knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo 2.24.2 2.1.63 x86_64
=Sum: Systémové Bonobo komponenty pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Bonobo je komponentový systém pro GNOME platformu. libbonobo je nová verze pro GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-32bit 2.24.2 2.1.63 x86_64
=Sum: Systémové Bonobo komponenty pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Bonobo je komponentový systém pro GNOME platformu. libbonobo je nová verze pro GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-lang 2.24.2 2.1.63 x86_64
=Sum: Systémové Bonobo komponenty pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Bonobo je komponentový systém pro GNOME platformu. libbonobo je nová verze pro GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui 2.24.2 1.1.201 x86_64
=Sum: Knihovny uživatelského rozhraní GNOME pro Bonobo
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje část uživatelského rozhraní GNOME 2.x, konkrétně Bonobo.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-32bit 2.24.2 1.1.201 x86_64
=Sum: Knihovny uživatelského rozhraní GNOME pro Bonobo
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje část uživatelského rozhraní GNOME 2.x, konkrétně Bonobo.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-lang 2.24.2 1.1.201 x86_64
=Sum: Knihovny uživatelského rozhraní GNOME pro Bonobo
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje část uživatelského rozhraní GNOME 2.x, konkrétně Bonobo.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_program_options1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::ProgramOptions Runtime libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::ProgramOptions Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_signals1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Signals Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Signals Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_thread1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Thread Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Thread runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libbrasero-burn0 2.28.3 0.3.4 x86_64
=Sum: CD/DVD burning application for GNOME
+Des:
<!-- DT:Rich -->
<p>Brasero is an application to burn CD/DVDs for the GNOME Desktop.
It is designed to be as simple as possible and has some unique
features to enable users to create their discs easily and quickly.
</p><p>
It supports creating audio discs, data discs, burning ISO and
other image files, and duplicating discs.
</p>
-Des:
##----------------------------------------
=Pkg: libbrasero-media0 2.28.3 0.3.4 x86_64
=Sum: CD/DVD burning application for GNOME
+Des:
<!-- DT:Rich -->
<p>Brasero is an application to burn CD/DVDs for the GNOME Desktop.
It is designed to be as simple as possible and has some unique
features to enable users to create their discs easily and quickly.
</p><p>
It supports creating audio discs, data discs, burning ISO and
other image files, and duplicating discs.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl-lang 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl4 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbz2-1 1.0.5 34.253.1 x86_64
=Sum: The bzip2 runtime library
+Des:
<!-- DT:Rich -->
<p>The bzip2 runtime library
</p>
-Des:
##----------------------------------------
=Pkg: libbz2-1-32bit 1.0.5 34.253.1 x86_64
=Sum: The bzip2 runtime library
+Des:
<!-- DT:Rich -->
<p>The bzip2 runtime library
</p>
-Des:
##----------------------------------------
=Pkg: libcaca 0.99.beta13b 47.30 x86_64
=Sum: Knihovna pro barevný ASCII art, textovou grafiku
+Des:
<!-- DT:Rich -->
<p>libcaca is the Colour AsCii Art library. It provides high level functions
for colour text drawing, simple primitives for line, polygon and ellipse
drawing, as well as powerful image to text conversion routines.
</p>
-Des:
##----------------------------------------
=Pkg: libcanberra-gtk 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcanberra-gtk0 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcanberra0 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcap-ng-utils 0.6.3 1.7.1 x86_64
=Sum: Utilities for analysing and setting file capabilities
+Des:
<!-- DT:Rich -->
<p>The libcap-ng-utils package contains applications to analyse the posix capabilities of all the program running on a system. It also lets you set the file system based capabilities.
</p>
-Des:
##----------------------------------------
=Pkg: libcap-ng0 0.6.3 1.7.1 x86_64
=Sum: An alternate POSIX capabilities library
+Des:
<!-- DT:Rich -->
<p>Libcap-ng is a library that makes using posix capabilities easier
</p>
-Des:
##----------------------------------------
=Pkg: libcap-ng0-32bit 0.6.3 1.7.1 x86_64
=Sum: An alternate POSIX capabilities library
+Des:
<!-- DT:Rich -->
<p>Libcap-ng is a library that makes using posix capabilities easier
</p>
-Des:
##----------------------------------------
=Pkg: libcap2 2.11 2.17.1 x86_64
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>Capabilities are a measure to limit the omnipotence of the superuser.
Currently a program started by root or setuid root has the power to
do anything.
Capabilities (Linux-Privs) provide a more fine-grained access control.
Without kernel patches, you can use this library to drop capabilities within
setuid binaries.
If you use patches, this can be done automatically by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: libcap2-32bit 2.11 2.17.1 x86_64
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>Capabilities are a measure to limit the omnipotence of the superuser.
Currently a program started by root or setuid root has the power to
do anything.
Capabilities (Linux-Privs) provide a more fine-grained access control.
Without kernel patches, you can use this library to drop capabilities within
setuid binaries.
If you use patches, this can be done automatically by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: libcares2 1.7.4 7.7.1 x86_64
=Sum: Library for asynchronous name resolves
+Des:
<!-- DT:Rich -->
<p>c-ares is a C library that performs DNS requests and name resolves asynchronously. c-ares is a fork of the library named &#39;ares&#39;, written by Greg Hudson at MIT.
</p>
-Des:
##----------------------------------------
=Pkg: libcares2-32bit 1.7.4 7.7.1 x86_64
=Sum: Library for asynchronous name resolves
+Des:
<!-- DT:Rich -->
<p>c-ares is a C library that performs DNS requests and name resolves asynchronously. c-ares is a fork of the library named &#39;ares&#39;, written by Greg Hudson at MIT.
</p>
-Des:
##----------------------------------------
=Pkg: libcdaudio 0.99.12 154.154.17 x86_64
=Sum: Functions to Control Operation of a CD-ROM When Playing Audio CDs
+Des:
<!-- DT:Rich -->
<p>libcdaudio is a library designed to provide functions to control
operation of a CD-ROM when playing audio CDs.  It also contains
functions for CDDB and CD index lookup.
</p>
-Des:
##----------------------------------------
=Pkg: libcdda_interface0 3.10.2 2.1.42 x86_64
=Sum: Program pro získání, kontrolu a opravu hudebních stop z CD
+Des:
<!-- DT:Rich -->
<p>&#39;cdparanoia&#39; načítá digitální audio přímo z CD, bez analogového mezikroku,
a zapisuje je do souboru nebo roury jako .wav, .aifc nebo jako syrový
16 bitový lineární PCM.
</p><p>
Beta verze, viz http://www.xiph.org/paranoia/
</p>
-Des:
##----------------------------------------
=Pkg: libcdda_interface0-32bit 3.10.2 2.1.42 x86_64
=Sum: Program pro získání, kontrolu a opravu hudebních stop z CD
+Des:
<!-- DT:Rich -->
<p>&#39;cdparanoia&#39; načítá digitální audio přímo z CD, bez analogového mezikroku,
a zapisuje je do souboru nebo roury jako .wav, .aifc nebo jako syrový
16 bitový lineární PCM.
</p><p>
Beta verze, viz http://www.xiph.org/paranoia/
</p>
-Des:
##----------------------------------------
=Pkg: libcdda_paranoia0 3.10.2 2.1.42 x86_64
=Sum: Program pro získání, kontrolu a opravu hudebních stop z CD
+Des:
<!-- DT:Rich -->
<p>&#39;cdparanoia&#39; načítá digitální audio přímo z CD, bez analogového mezikroku,
a zapisuje je do souboru nebo roury jako .wav, .aifc nebo jako syrový
16 bitový lineární PCM.
</p><p>
Beta verze, viz http://www.xiph.org/paranoia/
</p>
-Des:
##----------------------------------------
=Pkg: libcdda_paranoia0-32bit 3.10.2 2.1.42 x86_64
=Sum: Program pro získání, kontrolu a opravu hudebních stop z CD
+Des:
<!-- DT:Rich -->
<p>&#39;cdparanoia&#39; načítá digitální audio přímo z CD, bez analogového mezikroku,
a zapisuje je do souboru nebo roury jako .wav, .aifc nebo jako syrový
16 bitový lineární PCM.
</p><p>
Beta verze, viz http://www.xiph.org/paranoia/
</p>
-Des:
##----------------------------------------
=Pkg: libcddb2 1.3.0 67.15 x86_64
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio7 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio7-32bit 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio_cdda0 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio_paranoia0 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcelt0-2 0.11.1 3.5.18 x86_64
=Sum: Ultra-Low Delay Audio Codec
+Des:
<!-- DT:Rich -->
<p>The CELT codec is an experimental audio codec for use in low-delay
speech and audio communication.
</p>
-Des:
##----------------------------------------
=Pkg: libcelt0-2-32bit 0.11.1 3.5.18 x86_64
=Sum: Ultra-Low Delay Audio Codec
+Des:
<!-- DT:Rich -->
<p>The CELT codec is an experimental audio codec for use in low-delay
speech and audio communication.
</p>
-Des:
##----------------------------------------
=Pkg: libchamplain0 0.4.0 1.2.84 x86_64
=Sum: Library to display maps
+Des:
<!-- DT:Rich -->
<p>Libchamplain is a C library providing a ClutterActor to display maps. It
also provides a Gtk+ widget to display maps in Gtk+ applications.
</p><p>
It supports numerous free map sources such as OpenStreetMap,
OpenAerialMap and Maps for free.
</p>
-Des:
##----------------------------------------
=Pkg: libchewing 0.3.0 82.15 x86_64
=Sum: Intelligent Phonetic Input Method Library for Traditional Chinese
+Des:
<!-- DT:Rich -->
<p>Intelligent phonetic input method library for traditional Chinese.
</p>
-Des:
##----------------------------------------
=Pkg: libclutter-glx-1_0-0 1.0.6 1.1.66 x86_64
=Sum: The clutter library
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libclutter-gtk-0_10-0 0.10.2 2.1.88 x86_64
=Sum: The Clutter library for Gtk
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
Gtk+ support.
</p>
-Des:
##----------------------------------------
=Pkg: libcmpiutil 0.5.6 0.7.1 x86_64
=Sum: Library of utility functions for CMPI providers
+Des:
<!-- DT:Rich -->
<p>Libcmpiutil is a library of utility functions for CMPI providers.  The goal is to reduce the amount of repetitive work done in most CMPI providers by encapsulating common procedures with more &quot;normal&quot; APIs.  This extends from operations like getting typed instance properties to standardizing method dispatch and argument checking.
</p>
-Des:
##----------------------------------------
=Pkg: libcollection2 0.6.0 1.6.1 x86_64
=Sum: Collection data-type for C
+Des:
<!-- DT:Rich -->
<p>A data-type to collect data in a hierarchical structure for easy iteration and serialization
</p>
-Des:
##----------------------------------------
=Pkg: libcolorblind0 0.0.1 1.1.43 x86_64
=Sum: Pixel Filter for colorblind accessibility
+Des:
<!-- DT:Rich -->
<p>This library provides an unified way to recalculate colors
in order to present alternative views on images for colorblind
people.
</p>
-Des:
##----------------------------------------
=Pkg: libcom_err2 1.41.9 2.7.1 x86_64
=Sum: E2fsprogs error reporting library
+Des:
<!-- DT:Rich -->
<p>com_err is an error message display library.
</p>
-Des:
##----------------------------------------
=Pkg: libcom_err2-32bit 1.41.9 2.7.1 x86_64
=Sum: E2fsprogs error reporting library
+Des:
<!-- DT:Rich -->
<p>com_err is an error message display library.
</p>
-Des:
##----------------------------------------
=Pkg: libcompizconfig 0.7.8 4.8 x86_64
=Sum: CompizConfig plugin(ccp) required for compizconfig-settings-manager(ccsm)
+Des:
<!-- DT:Rich -->
<p>CompizConfig plugin(ccp) required for compizconfig-settings-manager(ccsm).
</p>
-Des:
##----------------------------------------
=Pkg: libcppunit-1_12-0 1.12.0 3.7 x86_64
=Sum: C++ Port of the JUnit Testing Framework
+Des:
<!-- DT:Rich -->
<p>CppUnit is the C++ port of the famous JUnit framework for unit testing.
Test output is in XML for automatic testing and GUI based for supervised tests.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco-0_6-3 0.6.1 120.16 x86_64
=Sum: Knihovna parseru CSS2
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model-like API.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco-0_6-3-32bit 0.6.1 120.16 x86_64
=Sum: Knihovna parseru CSS2
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model-like API.
</p>
-Des:
##----------------------------------------
=Pkg: libcryptsetup0 1.0.5_SVNr46 58.37.3 x86_64
=Sum: Set Up dm-crypt Based Encrypted Block Devices
+Des:
<!-- DT:Rich -->
<p>cryptsetup is used to conveniently set up dm-crypt based device-mapper targets. It allows to set up targets to read cryptoloop compatible volumes as well as LUKS formatted ones. The package additionally includes support for automatically setting up encrypted volumes at boot time via the config file /etc/crypttab.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync-plugin-sftp 0.41.98 1.21 x86_64
=Sum: A user level bidirectional client only file synchronizer
+Des:
<!-- DT:Rich -->
<p>csync is an implementation of a file synchronizer which provides the feature of roaming home directories for Linux clients. csync makes use of libsmbclient in Samba/Windows environments.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync-plugin-smb 0.41.98 1.21 x86_64
=Sum: SMB plugin for csync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using csync to synchronize with a Samba or Windows server.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync0 0.41.98 1.21 x86_64
=Sum: A user level bidirectional client only file synchronizer
+Des:
<!-- DT:Rich -->
<p>csync is an implementation of a file synchronizer which provides the feature of roaming home directories for Linux clients. csync makes use of libsmbclient in Samba/Windows environments.
</p>
-Des:
##----------------------------------------
=Pkg: libcurl4-32bit 7.19.7 1.18.1 x86_64
=Sum: cURL shared library version 4
+Des:
<!-- DT:Rich -->
<p>cURL shared library version 4.
</p>
-Des:
##----------------------------------------
=Pkg: libcurl4 7.19.7 1.18.1 x86_64
=Sum: cURL shared library version 4
+Des:
<!-- DT:Rich -->
<p>cURL shared library version 4.
</p>
-Des:
##----------------------------------------
=Pkg: libdaemon0 0.12 31.6 x86_64
=Sum: Lightweight C library That Eases the Writing of UNIX Daemons
+Des:
<!-- DT:Rich -->
<p>libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts:
<ul>
<li>A wrapper around fork() that does the correct daemonization procedure of a process
</li><li>A wrapper around syslog() for simpler log output compatible with syslog or STDERR
</li><li>An API for writing PID files
</li><li>An API for serializing UNIX signals into a pipe for usage with select() or poll()
</li><li>An API for running subprocesses with STDOUT and STDERR redirected to syslog
</li></ul>
APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal.
</p>
-Des:
##----------------------------------------
=Pkg: libdb-4_5-32bit 4.5.20 95.39 x86_64
=Sum: Berkeley DB Database Library Version 4.5
+Des:
<!-- DT:Rich -->
<p>Berkeley DB databázová knihovna je soubor programátorských nástrojů pro
databázovou podporu aplikacím. 
</p><p>
Balíček obsahuje runtime knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: libdb-4_5 4.5.20 95.39 x86_64
=Sum: Berkeley DB Database Library Version 4.5
+Des:
<!-- DT:Rich -->
<p>Berkeley DB databázová knihovna je soubor programátorských nástrojů pro
databázovou podporu aplikacím. 
</p><p>
Balíček obsahuje runtime knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: libdbus-1-qt3-0 0.8.1 17.25 x86_64
=Sum: Qt3 DBus Bindings
+Des:
<!-- DT:Rich -->
<p>This library provides Qt3-classes for accessing the DBus
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394 2.0.2 10.15 x86_64
=Sum: Knihovna pro ovládání digitálních kamer přes 1394
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the 1394-Based Digital Camera Specification. It utilizes the low-level functionality provided by libraw1394 to communicate with the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394-22 2.0.2 10.15 x86_64
=Sum: Knihovna pro ovládání digitálních kamer přes 1394
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf).  It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394_control12 1.2.2 10.15 x86_64
=Sum: Knihovna pro ovládání digitálních kamer přes 1394
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf).  It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdhash1 0.4.2 1.6.1 x86_64
=Sum: Dynamic hash table
+Des:
<!-- DT:Rich -->
<p>A hash table which will dynamically resize to achieve optimal storage &amp; access time properties
</p>
-Des:
##----------------------------------------
=Pkg: libdirac_decoder0 1.0.2 17.16.38 x86_64
=Sum: Dirac Video Codec Decoder Library
+Des:
<!-- DT:Rich -->
<p>Dirac is an open source video codec. It uses a traditional hybrid video codec architecture, but with the wavelet transform instead of the usual block transforms.  Motion compensation uses overlapped blocks to reduce block artefacts that would upset the transform coding stage.
</p><p>
Dirac can code just about any size of video, from streaming up to HD and beyond, although certain presets are defined for different applications and standards.  These cover the parameters that need to be set for the encoder to work, such as block sizes and temporal prediction structures, which must otherwise be set by hand.
</p><p>
Dirac is intended to develop into real coding and decoding software, capable of plugging into video processing applications and media players that need compression. It is intended to develop into a simple set of reliable but effective coding tools that work over a wide variety of content and formats, using well-understood compression techniques, in a clear and accessible software structure. It is not intended as a demonstration or reference coder.
</p>
-Des:
##----------------------------------------
=Pkg: libdirac_encoder0 1.0.2 17.16.38 x86_64
=Sum: Dirac Video Codec Encoder Library
+Des:
<!-- DT:Rich -->
<p>Dirac is an open source video codec. It uses a traditional hybrid video codec architecture, but with the wavelet transform instead of the usual block transforms.  Motion compensation uses overlapped blocks to reduce block artefacts that would upset the transform coding stage.
</p><p>
Dirac can code just about any size of video, from streaming up to HD and beyond, although certain presets are defined for different applications and standards.  These cover the parameters that need to be set for the encoder to work, such as block sizes and temporal prediction structures, which must otherwise be set by hand.
</p><p>
Dirac is intended to develop into real coding and decoding software, capable of plugging into video processing applications and media players that need compression. It is intended to develop into a simple set of reliable but effective coding tools that work over a wide variety of content and formats, using well-understood compression techniques, in a clear and accessible software structure. It is not intended as a demonstration or reference coder.
</p>
-Des:
##----------------------------------------
=Pkg: libdjvulibre21 3.5.21 1.24 x86_64
=Sum: Libraries of Open Source Implementation of DjVu - djvulibre
+Des:
<!-- DT:Rich -->
<p>Libraries of Open Source Implementation of DjVu - djvulibre.
</p>
-Des:
##----------------------------------------
=Pkg: libdmxview0 0.1.0 4.17 x86_64
=Sum: DMX viewing library
+Des:
<!-- DT:Rich -->
<p>Library for efficiently viewing and controlling remote desktop sessions.
</p>
-Des:
##----------------------------------------
=Pkg: libdns_sd 0.6.23 11.19.22 x86_64
=Sum: mDNSResponder Compatibility Package for D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>Apple mDNSResponder compatibility layer for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libdns_sd-32bit 0.6.23 11.19.22 x86_64
=Sum: mDNSResponder Compatibility Package for D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>Apple mDNSResponder compatibility layer for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libdrm 2.4.27 0.6.6 x86_64
=Sum: Userspace Interface for Kernel DRM Services
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdrm-32bit 2.4.27 0.6.6 x86_64
=Sum: Userspace Interface for Kernel DRM Services
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdv4 1.0.0 80.28 x86_64
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav4 4.1.3 1.16 x86_64
=Sum: A DVD Navigation Library
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje funkce pro zobrazení menu na video DVD discích.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdread4 4.1.3 1.22 x86_64
=Sum: Library for Reading DVD Video Images
+Des:
<!-- DT:Rich -->
<p>This package contains shared libraries for accessing DVD images
(this package does not contain DeCSS algorithms).
</p>
-Des:
##----------------------------------------
=Pkg: libdw1 0.152 4.7.86 x86_64
=Sum: Library to access DWARF debugging information
+Des:
<!-- DT:Rich -->
<p>This package provide a high-level library to access the DWARF debugging
information.  This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: libdw1-32bit 0.152 4.7.86 x86_64
=Sum: Library to access DWARF debugging information
+Des:
<!-- DT:Rich -->
<p>This package provide a high-level library to access the DWARF debugging
information.  This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: libebl1 0.152 4.7.86 x86_64
=Sum: A collection of utilities and DSOs to handle compiled objects
+Des:
<!-- DT:Rich -->
<p>Elfutils is a collection of utilities, including ld (a linker), nm (for listing symbols from object files), size (for listing the section sizes of an object or archive file), strip (for discarding symbols), readline (the see the raw ELF file structures), and elflint (to check for well-formed ELF files).  Also included are numerous helper libraries which implement DWARF, ELF, and machine-specific ELF
handling.
</p>
-Des:
##----------------------------------------
=Pkg: libebl1-32bit 0.152 4.7.86 x86_64
=Sum: A collection of utilities and DSOs to handle compiled objects
+Des:
<!-- DT:Rich -->
<p>Elfutils is a collection of utilities, including ld (a linker), nm (for listing symbols from object files), size (for listing the section sizes of an object or archive file), strip (for discarding symbols), readline (the see the raw ELF file structures), and elflint (to check for well-formed ELF files).  Also included are numerous helper libraries which implement DWARF, ELF, and machine-specific ELF
handling.
</p>
-Des:
##----------------------------------------
=Pkg: libelf0 0.8.12 1.1.52 x86_64
=Sum: Knihovna pro přístup k objektům formátu ELF
+Des:
<!-- DT:Rich -->
<p>Balíček libelf obsahuje knihovnu pro práci s obsahem souborů
ve formátu ELF. Pomocí knihovny libelf lze např. vypisovat jednotlivé
sekce ELF souborů.
</p>
-Des:
##----------------------------------------
=Pkg: libelf0-32bit 0.8.12 1.1.52 x86_64
=Sum: Knihovna pro přístup k objektům formátu ELF
+Des:
<!-- DT:Rich -->
<p>Balíček libelf obsahuje knihovnu pro práci s obsahem souborů
ve formátu ELF. Pomocí knihovny libelf lze např. vypisovat jednotlivé
sekce ELF souborů.
</p>
-Des:
##----------------------------------------
=Pkg: libelf1 0.152 4.7.86 x86_64
=Sum: Library to read and write ELF files
+Des:
<!-- DT:Rich -->
<p>This package provide a high-level library to read and write ELF files.
This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: libelf1-32bit 0.152 4.7.86 x86_64
=Sum: Library to read and write ELF files
+Des:
<!-- DT:Rich -->
<p>This package provide a high-level library to read and write ELF files.
This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: libenca0 1.13 8.8.19 x86_64
=Sum: Detects encoding of text files
+Des:
<!-- DT:Rich -->
<p>Enca is an Extremely Naive Charset Analyser. It detects character set and
encoding of text files and can also convert them to other encodings using
either a built-in converter or external libraries and tools like libiconv,
librecode, or cstocs.
</p><p>
Currently, it has support for Belarussian, Bulgarian, Croatian, Czech,
Estonian, Latvian, Lithuanian, Polish, Russian, Slovak, Slovene, Ukrainian,
Chinese, and some multibyte encodings (mostly variants of Unicode)
independent on the language.
</p><p>
This package also contains shared Enca library other programs can make use of.
</p><p>
Install Enca if you need to cope with text files of dubious origin
and unknown encoding and convert them to some reasonable encoding.
</p>
-Des:
##----------------------------------------
=Pkg: libenchant1 1.4.2 16.26 x86_64
=Sum: Generic Spell Checking Library
+Des:
<!-- DT:Rich -->
<p>A library providing an efficient extensible abstraction for dealing with different spell checking libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libesd0 0.2.41 3.1.41 x86_64
=Sum: A sound daemon for Enlightenment and GNOME
+Des:
<!-- DT:Rich -->
<p>Zvukový démon esound, který umí multiplexovat a používat
vyrovnávací paměť. Umí použít ALSA nebo OSS pro zvukový
výstup. K přehrávání a zaznamenávání zvuků ho využívá mnoho
projektů jako Enlightenment nebo GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libesd0-32bit 0.2.41 3.1.41 x86_64
=Sum: A sound daemon for Enlightenment and GNOME
+Des:
<!-- DT:Rich -->
<p>Zvukový démon esound, který umí multiplexovat a používat
vyrovnávací paměť. Umí použít ALSA nebo OSS pro zvukový
výstup. K přehrávání a zaznamenávání zvuků ho využívá mnoho
projektů jako Enlightenment nebo GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libesmtp 1.0.4 157.15.1 x86_64
=Sum: A Library for Posting Electronic Mail
+Des:
<!-- DT:Rich -->
<p>libESMTP is a library to manage posting (or submission of) electronic mail using SMTP to a preconfigured Mail Transport Agent (MTA) such as Exim. It may be used as part of a Mail User Agent (MUA) or another program that must be able to post electronic mail but where mail functionality is not that program&#39;s primary purpose.
</p>
-Des:
##----------------------------------------
=Pkg: libevent-1_4-2 1.4.5 24.21 x86_64
=Sum: Shared libraries from libevent
+Des:
<!-- DT:Rich -->
<p>The libevent library provides a mechanism to execute a function when a
specific event on a file descriptor occurs or after a given time has
passed.
</p><p>
This package holds the shared libraries for libevent.
</p>
-Des:
##----------------------------------------
=Pkg: libevoldap-2_4-2 2.4.12 4.19 x86_64
=Sum: NTLM patched OpenLDAP Client Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the NTLM patched OpenLDAP client libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libexempi3 2.0.2 2.22 x86_64
=Sum: XMP support library
+Des:
<!-- DT:Rich -->
<p>XMP parsing and IO library
</p>
-Des:
##----------------------------------------
=Pkg: libexif 0.6.17 2.12 x86_64
=Sum: An EXIF Tag Parsing Library for Digital Cameras
+Des:
<!-- DT:Rich -->
<p>Tato knihovna je používána pro rozbor EXIF informací z obrázků JPEG
vytvořených digitálními fotoaparáty.
</p>
-Des:
##----------------------------------------
=Pkg: libexif-32bit 0.6.17 2.12 x86_64
=Sum: An EXIF Tag Parsing Library for Digital Cameras
+Des:
<!-- DT:Rich -->
<p>Tato knihovna je používána pro rozbor EXIF informací z obrázků JPEG
vytvořených digitálními fotoaparáty.
</p>
-Des:
##----------------------------------------
=Pkg: libexiv2-4 0.17.1 31.20 x86_64
=Sum: Library to access image metadata
+Des:
<!-- DT:Rich -->
<p>libexiv2 is a C++ library with a C compatibility interface to access image metadata, esp from Exif tags.
</p>
-Des:
##----------------------------------------
=Pkg: libexpat1 2.0.1 88.26.1 x86_64
=Sum: Soubor nástrojů pro syntaktickou analýzu XML
+Des:
<!-- DT:Rich -->
<p>Expat je syntaktický analyzátor XML 1.0 napsaný v jazyce C.
Cílem je plně odpovídat standardu. V současné době to není
validační XML procesor. Poslední verzi lze získat na adrese
ftp://ftp.jclark.com/pub/xml/expat.zip.
Adresář xmltok obsahuje nízkoúrovňovou knihovnu pro převod XML
na tokeny. Rozhraní je dokumentováno v xmltok/xmltok.h.
Adresář xmlparse obsahuje knihovnu analyzátoru XML postavenou
nad knihovnou xmltok. Rozhraní je dokumentováno v xmlparse/xmlparse.h.
Adresář sample obsahuje jednoduchý příklad programu využívajícího
toto rozhraní. Dávkový soubor sample/build.bat slouží k sestavení
příkladu pomocí Visual C++.
Adresář xmlwf obsahuje aplikaci xmlwf, která používá knihovnu xmlparse.
Parametry příkazu xmlwf jsou soubory, které budou zkontrolovány
zda jsou správně formátovány. Můžete zadat jako parametr i adresář:
-d adresář. Pro každý dobře naformátovaný vstupní soubor bude vygenerován
odpovídající xml soubor v kanonickém tvaru. Parametr -x způsobí, že budou
zpracovány i odkazy na externí entity. Parametr -s prohlásí za chybné soubory,
které nejsou samostatné.
</p>
-Des:
##----------------------------------------
=Pkg: libexpat1-32bit 2.0.1 88.26.1 x86_64
=Sum: Soubor nástrojů pro syntaktickou analýzu XML
+Des:
<!-- DT:Rich -->
<p>Expat je syntaktický analyzátor XML 1.0 napsaný v jazyce C.
Cílem je plně odpovídat standardu. V současné době to není
validační XML procesor. Poslední verzi lze získat na adrese
ftp://ftp.jclark.com/pub/xml/expat.zip.
Adresář xmltok obsahuje nízkoúrovňovou knihovnu pro převod XML
na tokeny. Rozhraní je dokumentováno v xmltok/xmltok.h.
Adresář xmlparse obsahuje knihovnu analyzátoru XML postavenou
nad knihovnou xmltok. Rozhraní je dokumentováno v xmlparse/xmlparse.h.
Adresář sample obsahuje jednoduchý příklad programu využívajícího
toto rozhraní. Dávkový soubor sample/build.bat slouží k sestavení
příkladu pomocí Visual C++.
Adresář xmlwf obsahuje aplikaci xmlwf, která používá knihovnu xmlparse.
Parametry příkazu xmlwf jsou soubory, které budou zkontrolovány
zda jsou správně formátovány. Můžete zadat jako parametr i adresář:
-d adresář. Pro každý dobře naformátovaný vstupní soubor bude vygenerován
odpovídající xml soubor v kanonickém tvaru. Parametr -x způsobí, že budou
zpracovány i odkazy na externí entity. Parametr -s prohlásí za chybné soubory,
které nejsou samostatné.
</p>
-Des:
##----------------------------------------
=Pkg: libext2fs2 1.41.9 2.7.1 x86_64
=Sum: Ext2fs libray
+Des:
<!-- DT:Rich -->
<p>The basic Ext2fs library.
</p>
-Des:
##----------------------------------------
=Pkg: libfarsight-0_1-3 0.1.28 1.36 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libffado2 2.0.1 8.7.33 x86_64
=Sum: FireWire 1394 support for audio devices
+Des:
<!-- DT:Rich -->
<p>This package provides the libffado shared library that
provides a unified programming interface to configure and
use all supported devices. Currently this library is used
by the &#39;firewire&#39; backends of the jack audio connection kit
sound server. This backend provides audio and midi support,
and is available in jackd. Access to the device internal
configuration (e,g, internal mixer) is exposed using the
ffado-dbus-server daemon. This daemon exposes the
configurable parameters of all detected devices through
DBUS. The ffadomixer application in support/mixer presents
a GUI to control these parameters (only for officially
supported devices).
</p>
-Des:
##----------------------------------------
=Pkg: libffado2-32bit 2.0.1 8.7.33 x86_64
=Sum: FireWire 1394 support for audio devices
+Des:
<!-- DT:Rich -->
<p>This package provides the libffado shared library that
provides a unified programming interface to configure and
use all supported devices. Currently this library is used
by the &#39;firewire&#39; backends of the jack audio connection kit
sound server. This backend provides audio and midi support,
and is available in jackd. Access to the device internal
configuration (e,g, internal mixer) is exposed using the
ffado-dbus-server daemon. This daemon exposes the
configurable parameters of all detected devices through
DBUS. The ffadomixer application in support/mixer presents
a GUI to control these parameters (only for officially
supported devices).
</p>
-Des:
##----------------------------------------
=Pkg: libffi43-32bit 4.3.4_20091019 0.22.10 x86_64
=Sum: Foreign Function Interface library
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libffi43 4.3.4_20091019 0.22.10 x86_64
=Sum: Foreign Function Interface library
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libflaim 4.9.1046 39.24.1 x86_64
=Sum: Embeddable cross-platform database engine
+Des:
<!-- DT:Rich -->
<p>FLAIM is an embeddable cross-platform database engine that provides a rich, powerful, easy-to-use feature set. It is the database engine used by Novell eDirectory. It has proven to be highly scalable, reliable, and robust. It is available on a wide variety of 32 bit and 64 bit platforms.
</p>
-Des:
##----------------------------------------
=Pkg: libfprint0 0.0.6 18.20.1 x86_64
=Sum: Library for fingerprint reader support
+Des:
<!-- DT:Rich -->
<p>The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices. The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices.
</p>
-Des:
##----------------------------------------
=Pkg: libfprint0-32bit 0.0.6 18.20.1 x86_64
=Sum: Library for fingerprint reader support
+Des:
<!-- DT:Rich -->
<p>The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices. The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices.
</p>
-Des:
##----------------------------------------
=Pkg: libfreebl3 3.13.1 0.2.1 x86_64
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>NSS (Network Security Services) jsou knihovny umožňující meziplatformní vývoj aplikací s podporou bezpečnosti. Aplikace s NSS mohou podporvat SSL v2 a v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certifikáty a další bezpečnostní standardy.
</p>
-Des:
##----------------------------------------
=Pkg: libfreebl3-32bit 3.13.1 0.2.1 x86_64
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>NSS (Network Security Services) jsou knihovny umožňující meziplatformní vývoj aplikací s podporou bezpečnosti. Aplikace s NSS mohou podporvat SSL v2 a v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certifikáty a další bezpečnostní standardy.
</p>
-Des:
##----------------------------------------
=Pkg: libfreerdp0 0.8.2 0.6.1 x86_64
=Sum: Core libraries implementing the RDP protocol
+Des:
<!-- DT:Rich -->
<p>Core libraries implementing the RDP protocol.
</p>
-Des:
##----------------------------------------
=Pkg: libftgl2 2.1.2.99.5 20.10.55 x86_64
=Sum: Library for Using Arbitrary Fonts in OpenGL Applications
+Des:
<!-- DT:Rich -->
<p>FTGL is a free open source library that enables developers to use arbitrary fonts in their OpenGL (www.opengl.org) applications.
</p><p>
Unlike other OpenGL font libraries, FTGL uses standard font file formats, so there is no need of a preprocessing step to convert the high quality font data into a lesser quality, proprietary format.
</p><p>
FTGL uses the Freetype (www.freetype.org) font library to open and &#39;decode&#39; the fonts. It then takes that output and stores it in a format that is most efficient for OpenGL rendering.
</p><p>
The supported rendering modes are:
<ul>
<li>Bit maps

</li><li>Antialiased Pix maps

</li><li>Outlines

</li><li>Polygon meshes

</li><li>Extruded polygon meshes

</li><li>Texture maps

</li><li>Buffer maps
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libfuse2 2.7.2 61.23.1 x86_64
=Sum: Library of FUSE, the User space File System for GNU/Linux and BSD
+Des:
<!-- DT:Rich -->
<p>With FUSE, a user space program can export a file system through the <a href="pkg://kernel-default"> Linux kernel</a>.
</p><p>
A FUSE file system which only needs libfuse2 is <a href="pkg://ntfs-3g">ntfs-3g</a>, other
FUSE file systems might need the <a href="pkg://fuse">fuse</a> package in addition to have <tt>fusermount</tt> and <tt>/sbin/mount.fuse</tt>.
</p><p>
User space file systems which are implemented using FUSE are provided by the following packages:
<ul>
<li><a href="pkg://curlftpfs">curlftpfs</a> (mount FTP servers),
</li><li><a href="pkg://encfs">encfs</a> (layered file encryption),
</li><li><a href="pkg://fuseiso">fuseiso</a> (mount iso, img, bin, mdf and nrg CD-ROM images),
</li><li><a href="pkg://fusepod">fusepod</a> (mount iPods),
</li><li><a href="pkg://fusesmb">fusesmb</a> (mount a fully browseable network neighborhood),
</li><li><a href="pkg://gphotofs">gphotofs</a> (mount gphoto-supported cameras),
</li><li><a href="pkg://ntfs-3g">ntfs-3g</a> (mount NTFS volumes read-write),
</li><li><a href="pkg://obexfs">obexfs</a> (mount of bluetooth devices),
</li><li><a href="pkg://sshfs">sshfs</a> (mount over ssh),
</li><li><a href="pkg://wdfs">wdfs</a> (mount of WebDAV shares)
</li></ul>
After installing <a href="pkg://fuse-devel">fuse-devel</a>, administrators can compile and install other user space file systems which can be found at <tt>http://fuse.sourceforge.net/wiki</tt>
</p>
-Des:
##----------------------------------------
=Pkg: libgadu 1.8.2 1.22 x86_64
=Sum: Library for Handling of Gadu-Gadu Instant Messaging
+Des:
<!-- DT:Rich -->
<p>libgadu is a library for handling of protocol of a popular Polish instant messenger Gadu-Gadu.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome 1.20.1 2.41 x86_64
=Sum: Knihovna GNOME pro implementaci gnomeui a libbonoboui
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje implementaci ATK rozhraní pro widgety GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgcc43-32bit 4.3.4_20091019 0.22.17 x86_64
=Sum: Běhová knihovna pro C kompilátor
+Des:
<!-- DT:Rich -->
<p>Libgcc je třeba pro dynamicky linkované C programy.
</p>
-Des:
##----------------------------------------
=Pkg: libgcc43 4.3.4_20091019 0.22.17 x86_64
=Sum: Běhová knihovna pro C kompilátor
+Des:
<!-- DT:Rich -->
<p>Libgcc je třeba pro dynamicky linkované C programy.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj-devel 4.3 62.198 x86_64
=Sum: The system GNU Java development files.
+Des:
<!-- DT:Rich -->
<p>The system GNU Java development files.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-32bit 4.3.4_20091019 0.22.27 x86_64
=Sum: Běhová javová knihovna pro gcc
+Des:
<!-- DT:Rich -->
<p>Tuto knihovnu potřebujete, pokud chcete používat překladač GNU Java - gcj.
Zdrojové kódy jsou v gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43 4.3.4_20091019 0.22.27 x86_64
=Sum: Běhová javová knihovna pro gcc
+Des:
<!-- DT:Rich -->
<p>Tuto knihovnu potřebujete, pokud chcete používat překladač GNU Java - gcj.
Zdrojové kódy jsou v gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-devel 4.3.4_20091019 0.22.27 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Hlavičkové soubory a knihovny pro vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-jar 4.3.4_20091019 0.22.27 x86_64
=Sum: Java runtime library (jar files).
+Des:
<!-- DT:Rich -->
<p>These are the jar files that go along with the gcj front end to gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj_bc43 4.3.4_20091019 0.22.27 x86_64
=Sum: Fake library for BC-ABI compatibility.
+Des:
<!-- DT:Rich -->
<p>A fake library that is used at link time only. It ensures that
binaries built with the BC-ABI link against a constant SONAME.
This way, BC-ABI binaries continue to work if the SONAME underlying
libgcj.so changes.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt11 1.5.0 0.13.14 x86_64
=Sum: Šifrovací knihovna GNU
+Des:
<!-- DT:Rich -->
<p>Libgcrypt je obecná šifrovací knihovna vycházející z GnuPG (alfa verze).
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt11-32bit 1.5.0 0.13.14 x86_64
=Sum: Šifrovací knihovna GNU
+Des:
<!-- DT:Rich -->
<p>Libgcrypt je obecná šifrovací knihovna vycházející z GnuPG (alfa verze).
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-3 3.1.5 2.1.76 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0 3.1.5 2.1.76 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-mysql 3.1.5 2.1.76 x86_64
=Sum: mySQL Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-odbc 3.1.5 2.1.76 x86_64
=Sum: ODBC Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-postgres 3.1.5 2.1.76 x86_64
=Sum: PostgreSQL Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-sqlite 3.1.5 2.1.76 x86_64
=Sum: Sqlite Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0-4 4.1.2 1.3.48 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0 4.1.2 1.3.48 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0-mysql 4.1.2 1.3.48 x86_64
=Sum: MySQL Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0-postgres 4.1.2 1.3.48 x86_64
=Sum: PostgreSQL Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0-sqlite 4.1.2 1.3.48 x86_64
=Sum: Sqlite Provider for GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-lang 4.1.2 1.3.48 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-ui-4_0-4 4.1.2 1.3.48 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda3 3.1.5 2.1.76 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgda3-lang 3.1.5 2.1.76 x86_64
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgdiplus0 2.6.7 0.5.76 x86_64
=Sum: Open Source Implementation of the GDI+ API
+Des:
<!-- DT:Rich -->
<p>This is part of the Mono project. It is required when using Windows.Forms.
</p>
-Des:
##----------------------------------------
=Pkg: libgegl-0_0-0 0.0.20 1.35 x86_64
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: libgeoclue0 0.11.1 1.6.130 x86_64
=Sum: Modular Geoinformation Service - Library
+Des:
<!-- DT:Rich -->
<p>Geoclue is a modular geoinformation service built on top of the D-Bus
messaging system. The goal of the Geoclue project is to make creating
location-aware applications as simple as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libggz2 0.0.14.1 4.16 x86_64
=Sum: The GGZ project makes free online gaming possible
+Des:
<!-- DT:Rich -->
<p>The GGZ project makes free online gaming possible.
</p>
-Des:
##----------------------------------------
=Pkg: libgimpprint 4.2.7 32.28.1 x86_64
=Sum: Knihovny pro tisk v GIMPu
+Des:
<!-- DT:Rich -->
<p>Knihovny pro tisk v GIMPu.
</p>
-Des:
##----------------------------------------
=Pkg: libgio-2_0-0 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgio-2_0-0-32bit 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgio-fam 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgirepository-1_0-0 0.6.5 1.1.67 x86_64
=Sum: GObject Introspection Tools
+Des:
<!-- DT:Rich -->
<p>The goal of the project is to describe the APIs and collect them in
a uniform, machine readable format.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2 2.6.4 1.2.267 x86_64
=Sum: Knihovna Glade kompatibilní s GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>This library allows you to load Glade interface files in a program at runtime.
It does not require that you use Glade, but Glade is the easiest way to
create the interface files.  For an idea of how to use the library, see the
documentation, especially /usr/share/doc/packages/libglade/test-libgladee.c and
the glade-xml.h include, which is in the libglade package.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2-32bit 2.6.4 1.2.267 x86_64
=Sum: Knihovna Glade kompatibilní s GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>This library allows you to load Glade interface files in a program at runtime.
It does not require that you use Glade, but Glade is the easiest way to
create the interface files.  For an idea of how to use the library, see the
documentation, especially /usr/share/doc/packages/libglade/test-libgladee.c and
the glade-xml.h include, which is in the libglade package.
</p>
-Des:
##----------------------------------------
=Pkg: libglademm 2.6.7 1.29.213 x86_64
=Sum: C++ Interface for libglade (Part of GNOME Project)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libglade. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libglade with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: libglademm-2_4-1 2.6.7 1.29.213 x86_64
=Sum: C++ Interface for libglade (Part of GNOME Project)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libglade. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libglade with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: libglib-2_0-0 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libglib-2_0-0-32bit 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgme0 0.5.5 7.5.43 x86_64
=Sum: Collection of video game music file emulators
+Des:
<!-- DT:Rich -->
<p>Game_Music_Emu is a collection of video game music file emulators that support
the following formats and systems:<ul>
<li>AY: ZX Spectrum/Amstrad CPC
</li><li>GBS: Nintendo Game Boy
</li><li>GYM: Sega Genesis/Mega Drive
</li><li>HES: NEC TurboGrafx-16/PC Engine
</li><li>KSS: MSX Home Computer/other Z80 systems (doesn&#39;t support FM sound)
</li><li>NSF/NSFE: Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)
</li><li>SAP: Atari systems using POKEY sound chip
</li><li>SPC: Super Nintendo/Super Famicom
</li><li>VGM/VGZ: Sega Master System/Mark III, Sega Genesis/Mega Drive,BBC Micro
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libgmime-2_0-3 2.2.23 1.50.1 x86_64
=Sum: Knihovna MIME
+Des:
<!-- DT:Rich -->
<p>GMime je sada utilit pro analýzu a vytváření zpráv pomocí
MIME (Multipurpose Internet Mail Extension).
</p>
-Des:
##----------------------------------------
=Pkg: libgmime-2_4-2 2.4.8 1.2.55 x86_64
=Sum: Knihovna MIME
+Des:
<!-- DT:Rich -->
<p>GMime je sada utilit pro analýzu a vytváření zpráv pomocí
MIME (Multipurpose Internet Mail Extension).
</p>
-Des:
##----------------------------------------
=Pkg: libgmodule-2_0-0 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgmodule-2_0-0-32bit 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome 2.28.0 1.2.198 x86_64
=Sum: Základní knihovny pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje základní knihovny po platformu GNOME 2.x.
GNOME sám o sobě neobsahuje žádného správce oken, tzn. že máte
možnost vlastní volby. Mnoho uživatelů GNOME používá např. Sawfish,
Enlightenment nebo Icewm (koukněte se na jejich balíčky).
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-32bit 2.28.0 1.2.198 x86_64
=Sum: Základní knihovny pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje základní knihovny po platformu GNOME 2.x.
GNOME sám o sobě neobsahuje žádného správce oken, tzn. že máte
možnost vlastní volby. Mnoho uživatelů GNOME používá např. Sawfish,
Enlightenment nebo Icewm (koukněte se na jejich balíčky).
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-bluetooth7 2.28.6 0.7.1 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-desktop-2-11 2.28.2 0.6.18 x86_64
=Sum: API knihovna pro plochu GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libgnome-desktop, která obsahuje
API patřící k libgnome/libgnomeui, ale dosud neprošla dostatečným
testováním a proto není považována za stabilní. Její používání je pouze
na vlastní riziko.
</p><p>
Součástí jsou také dokumenty, které jsou instalovány jako část
Core-GNOME distribuce: GPL, .soubory GNOME desktop, program
gnome-about, některé manuálové stránky a grafické objekty a
ikony pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-desktop-2-11-32bit 2.28.2 0.6.18 x86_64
=Sum: API knihovna pro plochu GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libgnome-desktop, která obsahuje
API patřící k libgnome/libgnomeui, ale dosud neprošla dostatečným
testováním a proto není považována za stabilní. Její používání je pouze
na vlastní riziko.
</p><p>
Součástí jsou také dokumenty, které jsou instalovány jako část
Core-GNOME distribuce: GPL, .soubory GNOME desktop, program
gnome-about, některé manuálové stránky a grafické objekty a
ikony pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-lang 2.28.0 1.2.198 x86_64
=Sum: Základní knihovny pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje základní knihovny po platformu GNOME 2.x.
GNOME sám o sobě neobsahuje žádného správce oken, tzn. že máte
možnost vlastní volby. Mnoho uživatelů GNOME používá např. Sawfish,
Enlightenment nebo Icewm (koukněte se na jejich balíčky).
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-menu2 2.28.0.1 1.1.213 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík je svobodným softwarem a je součástí projektu GNOME.
</p><p>
Obsahuje implementaci návrhu &quot;Desktop Menu Specification&quot; z freedesktop.org:
</p><p>
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Obsaženy jsou rovněž konfigurační soubory nabídky GNOME, .directory
soubory a pomocné programy související s nabídkami.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-menu2-32bit 2.28.0.1 1.1.213 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>Tento balík je svobodným softwarem a je součástí projektu GNOME.
</p><p>
Obsahuje implementaci návrhu &quot;Desktop Menu Specification&quot; z freedesktop.org:
</p><p>
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Obsaženy jsou rovněž konfigurační soubory nabídky GNOME, .directory
soubory a pomocné programy související s nabídkami.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-window-settings1 2.28.1 0.22.1 x86_64
=Sum: Utility library for getting window manager settings
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje ovládací centrum pro prostředí GNOME 2.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas 2.26.0 1.2.231 x86_64
=Sum: Přídavné knihovny grafického uživatelského rozhraní pro GNOME
+Des:
<!-- DT:Rich -->
<p>libgnomecanvas je grafický doplněk pro knihovny grafického uživatelského rozhraní GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-32bit 2.26.0 1.2.231 x86_64
=Sum: Přídavné knihovny grafického uživatelského rozhraní pro GNOME
+Des:
<!-- DT:Rich -->
<p>libgnomecanvas je grafický doplněk pro knihovny grafického uživatelského rozhraní GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-lang 2.26.0 1.2.231 x86_64
=Sum: Přídavné knihovny grafického uživatelského rozhraní pro GNOME
+Des:
<!-- DT:Rich -->
<p>libgnomecanvas je grafický doplněk pro knihovny grafického uživatelského rozhraní GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups 0.2.3 109.19 x86_64
=Sum: Knihovna GNOME CUPS
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups-32bit 0.2.3 109.19 x86_64
=Sum: Knihovna GNOME CUPS
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups-lang 0.2.3 109.19 x86_64
=Sum: Knihovna GNOME CUPS
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb 3.1.2 88.7.22 x86_64
=Sum: Knihovna pro psaní databázových programů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Libgnomedb je knihovna, která usnadňuje psaní programů
pro GNOME pracujících s databázemi.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb-lang 3.1.2 88.7.22 x86_64
=Sum: Knihovna pro psaní databázových programů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Libgnomedb je knihovna, která usnadňuje psaní programů
pro GNOME pracujících s databázemi.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomekbd 2.28.2 1.1.164 x86_64
=Sum: GNOME Keyboard Library
+Des:
<!-- DT:Rich -->
<p>GNOME keyboard library, utility and applet.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomekbd-lang 2.28.2 1.1.164 x86_64
=Sum: GNOME Keyboard Library
+Des:
<!-- DT:Rich -->
<p>GNOME keyboard library, utility and applet.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint 2.18.6 2.1.357 x86_64
=Sum: Tisková knihovna GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje GNOME 2.x knihovnu, která obsahuje jednoduché a přehledné API por GNOME programy, které potřebují výstup na tiskárnu.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-32bit 2.18.6 2.1.357 x86_64
=Sum: Tisková knihovna GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje GNOME 2.x knihovnu, která obsahuje jednoduché a přehledné API por GNOME programy, které potřebují výstup na tiskárnu.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-lang 2.18.6 2.1.357 x86_64
=Sum: Tisková knihovna GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje GNOME 2.x knihovnu, která obsahuje jednoduché a přehledné API por GNOME programy, které potřebují výstup na tiskárnu.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui 2.18.4 2.1.218 x86_64
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní, vztahující se k tiskovému subsystému GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-32bit 2.18.4 2.1.218 x86_64
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní, vztahující se k tiskovému subsystému GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-lang 2.18.4 2.1.218 x86_64
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní, vztahující se k tiskovému subsystému GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu 1.0.0 307.10.1 x86_64
=Sum: GNOME su knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Libgnomesu is a library for providing superuser privileges to GNOME
applications. It supports sudo, consolehelper, PAM, and su.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu-lang 1.0.0 307.10.1 x86_64
=Sum: GNOME su knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Libgnomesu is a library for providing superuser privileges to GNOME
applications. It supports sudo, consolehelper, PAM, and su.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu0 1.0.0 307.10.1 x86_64
=Sum: GNOME su knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Libgnomesu is a library for providing superuser privileges to GNOME
applications. It supports sudo, consolehelper, PAM, and su.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui 2.24.2 1.1.187 x86_64
=Sum: Knihovny GNOME pro uživatelského rozhraní
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní potřebné pro aplikace
psané pro uživatelské prostředí GNOME. Pokud chcete vyvíjet software pro
GNOME 2.x, pak potřebujete také libgnomeui-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-32bit 2.24.2 1.1.187 x86_64
=Sum: Knihovny GNOME pro uživatelského rozhraní
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní potřebné pro aplikace
psané pro uživatelské prostředí GNOME. Pokud chcete vyvíjet software pro
GNOME 2.x, pak potřebujete také libgnomeui-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-lang 2.24.2 1.1.187 x86_64
=Sum: Knihovny GNOME pro uživatelského rozhraní
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje všechny funkce a rozhraní potřebné pro aplikace
psané pro uživatelské prostředí GNOME. Pokud chcete vyvíjet software pro
GNOME 2.x, pak potřebujete také libgnomeui-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libgnutls26 2.4.1 24.39.33.1 x86_64
=Sum: GNU TLS knihovna
+Des:
<!-- DT:Rich -->
<p>GnuTLS projekt má za cíl vytvořit knihovnu poskytující bezpečné připojení
na úrovni transportní vrstvy. V současné době GnuTLS knihovna implementuje
navržené TLS standardy skupiny IETF.
</p>
-Des:
##----------------------------------------
=Pkg: libgnutls26-32bit 2.4.1 24.39.33.1 x86_64
=Sum: GNU TLS knihovna
+Des:
<!-- DT:Rich -->
<p>GnuTLS projekt má za cíl vytvořit knihovnu poskytující bezpečné připojení
na úrovni transportní vrstvy. V současné době GnuTLS knihovna implementuje
navržené TLS standardy skupiny IETF.
</p>
-Des:
##----------------------------------------
=Pkg: libgobject-2_0-0 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgobject-2_0-0-32bit 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgomp43-32bit 4.3.4_20091019 0.22.17 x86_64
=Sum: The GNU compiler collection OpenMP runtime library
+Des:
<!-- DT:Rich -->
<p>This is the OpenMP runtime library needed by OpenMP enabled programs that were
built with the -fopenmp compiler option and by programs that were
auto-parallelized via the -ftree-parallelize-loops compiler option.
</p>
-Des:
##----------------------------------------
=Pkg: libgomp43 4.3.4_20091019 0.22.17 x86_64
=Sum: The GNU compiler collection OpenMP runtime library
+Des:
<!-- DT:Rich -->
<p>This is the OpenMP runtime library needed by OpenMP enabled programs that were
built with the -fopenmp compiler option and by programs that were
auto-parallelized via the -ftree-parallelize-loops compiler option.
</p>
-Des:
##----------------------------------------
=Pkg: libgoocanvas3 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error0 1.10 0.7.29 x86_64
=Sum: Library That Defines Common Error Values for All GnuPG Components
+Des:
<!-- DT:Rich -->
<p>This is a library that defines common error values for all GnuPG
components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon, and possibly more in the future.
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error0-32bit 1.10 0.7.29 x86_64
=Sum: Library That Defines Common Error Values for All GnuPG Components
+Des:
<!-- DT:Rich -->
<p>This is a library that defines common error values for all GnuPG
components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon, and possibly more in the future.
</p>
-Des:
##----------------------------------------
=Pkg: libgpgme11 1.1.6 25.30 x86_64
=Sum: Knihovna určená pro tvorbu jednoduššího GnuPG přístupu k aplikacím
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG
easier for applications. It provides a high-level Crypto API for
encryption, decryption, signing, signature verification, and key
management. Currently it uses GnuPG as its back-end, but the API is not
restricted to this engine.
</p><p>
Who Should use GPGME?
</p><p>
Because the direct use of GnuPG from an application can be a
complicated programming task, it is suggested that all software should
try to use GPGME instead. This way bug fixes or improvements can be
done at a central place and every application benefits from this.
Authors of MUAs should especially consider using GPGME. Creating a set
of standard widgets for common key selection tasks is even planned.
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2 2.4.3 3.25.73 x86_64
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
gphoto2 --list-cameras
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2-32bit 2.4.3 3.25.73 x86_64
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
gphoto2 --list-cameras
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2-lang 2.4.3 3.25.73 x86_64
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
gphoto2 --list-cameras
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-lang 0.8.2 3.5.175 x86_64
=Sum: libgpod translations
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. This package includes the translations for libgpod
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-sharp 0.8.2 3.5.175 x86_64
=Sum: Library to Manipulate Songs and Playlists Stored on an iPod -- .NET Bindings
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. It
provides an easy-to-use API to retrieve the list of files and
playlists stored on an iPod, modify them, and save them back to the iPod.
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-tools 0.8.2 3.5.175 x86_64
=Sum: Tools for libgpod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. This package includes support tools for libgpod
</p>
-Des:
##----------------------------------------
=Pkg: libgpod4 0.8.2 3.5.175 x86_64
=Sum: Library to Manipulate Songs and Playlists Stored on an iPod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content.
It provides an easy-to-use API to retrieve the list of files and playliststored on an iPod, modify them, and save them back to the iPod.
</p>
-Des:
##----------------------------------------
=Pkg: libgsf-1-114 1.14.9 2.27 x86_64
=Sum: GNOME knihovna pro práci se strukturovanými soubory
+Des:
<!-- DT:Rich -->
<p>Knihovna pro čtení a zápis strukturovaných souborů
(například MS OLE a Zip).
</p>
-Des:
##----------------------------------------
=Pkg: libgsf-1-114-32bit 1.14.9 2.27 x86_64
=Sum: GNOME knihovna pro práci se strukturovanými soubory
+Des:
<!-- DT:Rich -->
<p>Knihovna pro čtení a zápis strukturovaných souborů
(například MS OLE a Zip).
</p>
-Des:
##----------------------------------------
=Pkg: libgsf 1.14.9 2.27 x86_64
=Sum: GNOME knihovna pro práci se strukturovanými soubory
+Des:
<!-- DT:Rich -->
<p>Knihovna pro čtení a zápis strukturovaných souborů
(například MS OLE a Zip).
</p>
-Des:
##----------------------------------------
=Pkg: libgsf-gnome 1.14.9 2.27 x86_64
=Sum: GNOME knihovna pro práci se strukturovanými soubory
+Des:
<!-- DT:Rich -->
<p>Knihovna pro čtení a zápis strukturovaných souborů
(například MS OLE a Zip).
</p>
-Des:
##----------------------------------------
=Pkg: libgsm1 1.0.12 2.21 x86_64
=Sum: GSM 06.10 Lossy Speech Compressor Library and Utilities
+Des:
<!-- DT:Rich -->
<p>Contains libraries and binaries for a GSM speech compressor.
libgsm contains a standard implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s.
GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility with typical UNIX applications, our implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker recognition. Even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate).
The interfaces offered are a front-end modeled after compress(1) and a library API.  Compression and decompression run faster than real-time on most SPARC stations.  The implementation has been verified against the ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgssdp-1_0-2 0.7.0 1.1.202 x86_64
=Sum: Library for resource discovery and announcement over SSDP
+Des:
<!-- DT:Rich -->
<p>gssdp offers a GObject-based API for handling resource discovery and
announcement over SSDP.
</p>
-Des:
##----------------------------------------
=Pkg: libgssglue1 0.1 20.2.1 x86_64
=Sum: Generická GSSAPI knihovna
+Des:
<!-- DT:Rich -->
<p>This library exports a gssapi interface, but does not implement any gssapi
mechanisms itself. Instead it calls gssapi routines in other libraries,
depending on the mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: libgstapp-0_10-0 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstapp-0_10-0-32bit 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstbasecamerabinsrc-0_10-0 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstbasecamerabinsrc-0_10-0-32bit 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstbasevideo-0_10-0 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstbasevideo-0_10-0-32bit 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstfarsight-0_10-0 0.0.16 1.1.169 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstinterfaces-0_10-0 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstinterfaces-0_10-0-32bit 0.10.35 5.15.8 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstphotography-0_10-0 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstphotography-0_10-0-32bit 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstreamer-0_10-0 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: libgstreamer-0_10-0-32bit 0.10.35 2.9.46 x86_64
=Sum: Streaming Multimedia knihovna
+Des:
<!-- DT:Rich -->
<p>GStreamer je multimediální streaming framework postavený na filtrech,
které pracují s daty. Aplikace používající tuto knihovnu mohou pracovat s
medii (realtime zpracování zvuku, přehrání videa...). Modulární architektura
umožňuje snadno přidat další datové typy nebo funkce.
</p>
-Des:
##----------------------------------------
=Pkg: libgstsignalprocessor-0_10-0 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstsignalprocessor-0_10-0-32bit 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstvdp-0_10-0 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgstvdp-0_10-0-32bit 0.10.22 7.9.63 x86_64
=Sum: GStreamer Media framework moduly
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data.
Applications using this library can do anything media-related,from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libgthread-2_0-0 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgthread-2_0-0-32bit 2.22.5 0.2.23 x86_64
=Sum: Knihovna s praktickými funkcemi napsaná v jazyce C
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje často používané funkce v jazyce C
pro práci se seznamy a hashi. Požívá ji Gtk+ a GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgtk-vnc-1_0-0 0.3.9 1.1.215 x86_64
=Sum: A GTK widget for VNC clients
+Des:
<!-- DT:Rich -->
<p>gtk-vnc is a VNC viewer widget for GTK+. It is built using coroutines
allowing it to be completely asynchronous while remaining single threaded.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml 2.11.1 64.23.220 x86_64
=Sum: Knihovna pro podporu HTML v rámci GTK2.0
+Des:
<!-- DT:Rich -->
<p>libgtkhtml obsahuje rozšíření pro GTK, která vylepšují jeho práci s HTML. Je hojně používaná programy GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml-32bit 2.11.1 64.23.220 x86_64
=Sum: Knihovna pro podporu HTML v rámci GTK2.0
+Des:
<!-- DT:Rich -->
<p>libgtkhtml obsahuje rozšíření pro GTK, která vylepšují jeho práci s HTML. Je hojně používaná programy GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: libgtksourceview-2_0-0 2.8.2 0.1.195 x86_64
=Sum: GTK+ 2.0 widget pro editaci zdrojových kódů
+Des:
<!-- DT:Rich -->
<p>GtkSourceView je textový widget rozšiřující standardní GTK+ 2.x
textový widget GtkTextView.
</p><p>
Vylepšuje GtkTextView o kontrolu syntaxe a další funkce
editoru zdrojových kódů.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop 2.28.0 1.2.20 x86_64
=Sum: Knihovna LibGTop
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop-2_0-7 2.28.0 1.2.20 x86_64
=Sum: Knihovna LibGTop
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop-lang 2.28.0 1.2.20 x86_64
=Sum: Knihovna LibGTop
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgudev-1_0-0 147 0.47.2 x86_64
=Sum: GObject library, to access udev device information
+Des:
<!-- DT:Rich -->
<p>This package contains the GObject library libgudev, which provides
access to udev device information.
</p>
-Des:
##----------------------------------------
=Pkg: libgudev-1_0-0-32bit 147 0.47.2 x86_64
=Sum: GObject library, to access udev device information
+Des:
<!-- DT:Rich -->
<p>This package contains the GObject library libgudev, which provides
access to udev device information.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-1_0-3 0.13.0 1.1.193 x86_64
=Sum: Implementation of the UPnP specification
+Des:
<!-- DT:Rich -->
<p>GUPnP implements the UPnP specification: resource announcement and
discovery, description, control, event notification, and presentation
(GUPnP includes basic web server functionality through libsoup). GUPnP
does not include helpers for construction or control of specific
standardized resources (e.g. MediaServer); this is left for higher level
libraries utilizing the GUPnP framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-igd-1_0-2 0.1.3 2.1.183 x86_64
=Sum: Library to handle UPnP IGD port mapping
+Des:
<!-- DT:Rich -->
<p>gupnp-igd is a library to handle UPnP IGD port mapping. It is supposed
to have a very simple API.
</p>
-Des:
##----------------------------------------
=Pkg: libgvfscommon0 1.4.3 0.13.1 x86_64
=Sum: VFS functionality for GLib
+Des:
<!-- DT:Rich -->
<p>VFS functionality for GLib.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather 2.28.0 1.4.8 x86_64
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather-lang 2.28.0 1.4.8 x86_64
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather1 2.28.0 1.4.8 x86_64
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather1-32bit 2.28.0 1.4.8 x86_64
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libgwenhywfar38 2.6.2 34.32 x86_64
=Sum: A Multiplatform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows.  It also includes some often needed
functions (for example, for handling and parsing of configuration files, reading and writing
of XML files, and interprocess communication). It is used by OpenHBCI2,
Libchipcard2, Simthetic, AqBanking, and QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: libhangul 0.0.9 3.1.41 x86_64
=Sum: Hangul input library used by scim-hangul
+Des:
<!-- DT:Rich -->
<p>Hangul input library used by scim-hangul
</p>
-Des:
##----------------------------------------
=Pkg: libhangul-32bit 0.0.9 3.1.41 x86_64
=Sum: Hangul input library used by scim-hangul
+Des:
<!-- DT:Rich -->
<p>Hangul input library used by scim-hangul
</p>
-Des:
##----------------------------------------
=Pkg: libical0 0.43 1.9.1 x86_64
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF&#39;s iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libical0-32bit 0.43 1.9.1 x86_64
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF&#39;s iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libicu 4.0 7.26.1 x86_64
=Sum: "International Components for Unicode" (vývojářské soubory)
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode support. This package contains the runtime
libraries for ICU. It does not contain any of the data files needed at
runtime and present in the `icu&#39; and `icu-locales` packages.
</p>
-Des:
##----------------------------------------
=Pkg: libid3tag 0.15.1b 130.17 x86_64
=Sum: ID3 Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>Libid3tag je knihovna, pomocí které lze číst a zapisovat značky ID3,
verze ID3v1 i ID3v2
</p>
-Des:
##----------------------------------------
=Pkg: libidl 0.8.13 1.1.57 x86_64
=Sum: Knihovna syntaktického analyzátoru IDL
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA
v2.2-compliant Interface Definition Language (IDL) files. IDL is a
specification for defining interfaces that can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidl-32bit 0.8.13 1.1.57 x86_64
=Sum: Knihovna syntaktického analyzátoru IDL
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA
v2.2-compliant Interface Definition Language (IDL) files. IDL is a
specification for defining interfaces that can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidn 1.10 3.18 x86_64
=Sum: Podpora pro IDN (Internationalized Domain Names)
+Des:
<!-- DT:Rich -->
<p>GNU Libidn je implementací Stringprep, Punycode a IDNA specifikací definovaných skupinou IDN(IETF Internationalized Domain Names working group). Je používána pro mezinárodní řetězce (doménová jména, hesla), Obsahuje generickou implementaci Stringprep s Unicode 3.2 NFKC normalizací, mapováním, zakázanými znaky a oboustranným zpracováním. Podporováno je také kódování IDNA ACE (ASCII Compatible Encoding).
</p>
-Des:
##----------------------------------------
=Pkg: libidn-32bit 1.10 3.18 x86_64
=Sum: Podpora pro IDN (Internationalized Domain Names)
+Des:
<!-- DT:Rich -->
<p>GNU Libidn je implementací Stringprep, Punycode a IDNA specifikací definovaných skupinou IDN(IETF Internationalized Domain Names working group). Je používána pro mezinárodní řetězce (doménová jména, hesla), Obsahuje generickou implementaci Stringprep s Unicode 3.2 NFKC normalizací, mapováním, zakázanými znaky a oboustranným zpracováním. Podporováno je také kódování IDNA ACE (ASCII Compatible Encoding).
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883 1.1.0 119.15 x86_64
=Sum: Implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new &quot;rawiso&quot; API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883-32bit 1.1.0 119.15 x86_64
=Sum: Implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new &quot;rawiso&quot; API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libieee1284 0.2.11 31.14 x86_64
=Sum: A Library for Interfacing IEEE 1284-Compatible Devices
+Des:
<!-- DT:Rich -->
<p>This library is intended to be used by applications that need to
communicate with (or at least identify) devices that are attached via
a parallel port.
</p><p>
For Linux, there are some wrinkles in communicating with devices on
parallel ports (see /usr/share/doc/packages/libieee1284/README).
The aim of this library is to take all the worry about these
wrinkles from the application.  It figures out which method is
appropriate for the currently running kernel.  For instance, if the
application wants to know the device ID of a device on a particular
port, it asks the library for the the device ID.  The library
then figures out if it is available via /proc (in any of the possible
locations) and, if not, tries asking the device itself.  If
/dev/parport0 is not available for use, it tries ioperm; if that
fails, it tries /dev/port.  The application does not have to
care.
</p>
-Des:
##----------------------------------------
=Pkg: libieee1284-32bit 0.2.11 31.14 x86_64
=Sum: A Library for Interfacing IEEE 1284-Compatible Devices
+Des:
<!-- DT:Rich -->
<p>This library is intended to be used by applications that need to
communicate with (or at least identify) devices that are attached via
a parallel port.
</p><p>
For Linux, there are some wrinkles in communicating with devices on
parallel ports (see /usr/share/doc/packages/libieee1284/README).
The aim of this library is to take all the worry about these
wrinkles from the application.  It figures out which method is
appropriate for the currently running kernel.  For instance, if the
application wants to know the device ID of a device on a particular
port, it asks the library for the the device ID.  The library
then figures out if it is available via /proc (in any of the possible
locations) and, if not, tries asking the device itself.  If
/dev/parport0 is not available for use, it tries ioperm; if that
fails, it tries /dev/port.  The application does not have to
care.
</p>
-Des:
##----------------------------------------
=Pkg: libimobiledevice-tools 1.1.1 7.24.94 x86_64
=Sum: Tools using libimobiledevice for iPhone, iPod Touch and iPad
+Des:
<!-- DT:Rich -->
<p>libimobiledevice is a software library that talks the protocols to support
iPhone, iPod Touch and iPad devices. Unlike other projects, it does not depend
on using any existing `.dll` or `.so` libraries from Apple.
</p>
-Des:
##----------------------------------------
=Pkg: libimobiledevice2 1.1.1 7.24.94 x86_64
=Sum: Native protocols library for iPhone, iPod Touch and iPad
+Des:
<!-- DT:Rich -->
<p>libimobiledevice is a software library that talks the protocols to support
iPhone, iPod Touch and iPad devices. Unlike other projects, it does not depend
on using any existing `.dll` or `.so` libraries from Apple.
</p>
-Des:
##----------------------------------------
=Pkg: libini_config2 0.6.1 1.6.1 x86_64
=Sum: INI file parser for C
+Des:
<!-- DT:Rich -->
<p>Library to process config files in INI format into a libcollection data structure
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser0 2.17 87.17 x86_64
=Sum: Library to parse ini files
+Des:
<!-- DT:Rich -->
<p>Libiniparser offers parsing of ini files from the C level.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser0-32bit 2.17 87.17 x86_64
=Sum: Library to parse ini files
+Des:
<!-- DT:Rich -->
<p>Libiniparser offers parsing of ini files from the C level.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata 1.0.2 1.22 x86_64
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command line utility, iptc, for editing IPTC data in JPEG files.
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata0 1.0.2 1.22 x86_64
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command line utility, iptc, for editing IPTC data in JPEG files.
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiso9660-5 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libiterm 0.5.20040304 259.27 x86_64
=Sum: Internationalized Terminal Emulator Library
+Des:
<!-- DT:Rich -->
<p>This is a portable library for internationalized terminal emulator.
All you need to make terminal emulator is to implements Callback functions,
like a drawing string on specific column and row, or set fore/background
color and so on.
</p>
-Des:
##----------------------------------------
=Pkg: libjack0 1.9.7 4.5.45 x86_64
=Sum: Jack Audio Connection Kit Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library to access JACK (Jack Audio Connection Kit).
</p>
-Des:
##----------------------------------------
=Pkg: libjack0-32bit 1.9.7 4.5.45 x86_64
=Sum: Jack Audio Connection Kit Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library to access JACK (Jack Audio Connection Kit).
</p>
-Des:
##----------------------------------------
=Pkg: libjasper 1.900.1 134.11.1 x86_64
=Sum: Knihovna JPEG-2000
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libjasper implementující podporu
pro formát obrázků JPEG-2000, část I.
</p>
-Des:
##----------------------------------------
=Pkg: libjasper-32bit 1.900.1 134.11.1 x86_64
=Sum: Knihovna JPEG-2000
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libjasper implementující podporu
pro formát obrázků JPEG-2000, část I.
</p>
-Des:
##----------------------------------------
=Pkg: libjingle-0_3-0 0.3.11 7.14 x86_64
=Sum: Library for Peer-to-Peer Applications
+Des:
<!-- DT:Rich -->
<p>Libjingle is a collection of open-source C++ code and sample applications that enables you to build a peer-to-peer application.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg-32bit 6.2.0 879.10 x86_64
=Sum: JPEG knihovny
+Des:
<!-- DT:Rich -->
<p>Knihovny (statické i dynamické) pro práci s grafickým formátem JPEG.
Jejich zdrojové texty jsou obsaženy ve zdrojovém balíčku jpeg.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg 6.2.0 879.10 x86_64
=Sum: JPEG knihovny
+Des:
<!-- DT:Rich -->
<p>Knihovny (statické i dynamické) pro práci s grafickým formátem JPEG.
Jejich zdrojové texty jsou obsaženy ve zdrojovém balíčku jpeg.
</p>
-Des:
##----------------------------------------
=Pkg: libkate1 0.4.1 11.12.18 x86_64
=Sum: A karaoke and text codec for embedding in Ogg
+Des:
<!-- DT:Rich -->
<p>Kate is a codec for karaoke and text encapsulation for Ogg. Most of the
time, this would be multiplexed with audio/video to carry subtitles,
song lyrics (with or without karaoke data), etc, but doesn&#39;t have to be.
A possible use of a lone Kate stream would be an e-book. Moreover, the
motion feature gives Kate a powerful means to describe arbitrary curves,
so hand drawing of shapes can be achieved.
</p><p>
This was originally meant for karaoke use, but can be used for any
purpose. Motions can be attached to various semantics, like position,
color, etc, so scrolling or fading text can be defined.
</p>
-Des:
##----------------------------------------
=Pkg: libkcal 3.5.10 8.30 x86_64
=Sum: Calendaring Classes
+Des:
<!-- DT:Rich -->
<p>This library contains the calendaring classes originally only used by KOrganizer. They provide a C++ API for handling the vCalendar and iCalendar formats, which makes use of Qt classes. This library should be GUI independent and suitable for writing command line applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkcal2 3.5.10 8.30 x86_64
=Sum: Calendaring Classes
+Des:
<!-- DT:Rich -->
<p>This library contains the calendaring classes originally only used by KOrganizer. They provide a C++ API for handling the vCalendar and iCalendar formats, which makes use of Qt classes. This library should be GUI independent and suitable for writing command line applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkcddb4 4.3.5 0.2.28 x86_64
=Sum: KDE CDDB Library
+Des:
<!-- DT:Rich -->
<p>A library for retrieving and sending cddb information
</p>
-Des:
##----------------------------------------
=Pkg: libkcompactdisc4 4.3.5 0.2.28 x86_64
=Sum: KDE CD Library
+Des:
<!-- DT:Rich -->
<p>libworkman is a multi-plaform CD-Player library for creating various CD-Player-UIs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw3 0.1.4 50.26 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw3-lang 0.1.4 50.26 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw7 4.3.5 0.2.1 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkde4-32bit 4.3.5 0.6.1 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages of the K Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkde4 4.3.5 0.6.1 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages of the K Desktop Environment. It contains the necessary libraries for the KDE desktop.
</p><p>
This package is absolutely necessary for using graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdecore4-32bit 4.3.5 0.6.1 x86_64
=Sum: KDE Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the core libraries of the K Desktop Environment.
</p><p>
This package is absolutely necessary for using KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdecore4 4.3.5 0.6.1 x86_64
=Sum: KDE Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the core libraries of the K Desktop Environment.
</p><p>
This package is absolutely necessary for using KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdegames4 4.3.5 0.1.61 x86_64
=Sum: Library for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE games library.
</p>
-Des:
##----------------------------------------
=Pkg: libkdepim4 4.3.5 0.6.2 x86_64
=Sum: KDE PIM Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic packages for KDE PIM applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdepimlibs4 4.3.5 0.1.68 x86_64
=Sum: KDE PIM Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries for KDE PIM applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-3 0.1.7 49.26 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-7 4.3.5 0.2.1 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi0 0.1.6 1.32 x86_64
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základní rozhraní modulů KDE pro manipulaci s obrázky. Moduly najdete v balíčku kipi-plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi0-lang 0.1.6 1.32 x86_64
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základní rozhraní modulů KDE pro manipulaci s obrázky. Moduly najdete v balíčku kipi-plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi6 4.3.5 0.2.1 x86_64
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základní rozhraní modulů KDE pro manipulaci s obrázky. Moduly najdete v balíčku kipi-plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libkmime2 3.5.10 8.30 x86_64
=Sum: Library to read MIME messages
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read MIME messages.
</p>
-Des:
##----------------------------------------
=Pkg: libknotificationitem-1-1 4.3.5 0.1.64 x86_64
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries of the K Desktop Environment.
It contains the necessary libraries for the KDE desktop that do not have
their API frozen yet and may therefore not keep backwards compatibility.
</p>
-Des:
##----------------------------------------
=Pkg: libkonq5 4.3.5 0.1.74 x86_64
=Sum: KDE Konqueror Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries used by file managers as Konqueror.
</p>
-Des:
##----------------------------------------
=Pkg: libksane0 4.3.5 0.2.1 x86_64
=Sum: KDE scan library
+Des:
<!-- DT:Rich -->
<p>This package contains a library to add scan support to KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libksba 1.0.4 1.16 x86_64
=Sum: Knihovna X.509
+Des:
<!-- DT:Rich -->
<p>KSBA je knihovna, která zjednodušuje práci s certifikáty X.509,
daty CMS a podobnými.
</p>
-Des:
##----------------------------------------
=Pkg: libktnef1 3.5.10 8.30 x86_64
=Sum: Library to read TNEF
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read the TNEF format.
</p>
-Des:
##----------------------------------------
=Pkg: liblazy1 0.2 35.16 x86_64
=Sum: Liblazy - pohodlné D-Bus metody
+Des:
<!-- DT:Rich -->
<p>Liblazy je jednoduchá knihovna poskytující pohodlné funkce pro odesílání zpráv přes D-Bus démona, dotazy na HAL nebo dotazy na PolicyKit o právech.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms1 1.17 77.14.19 x86_64
=Sum: Libraries for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>Little cms is a small speed optimized color management engine.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms1-32bit 1.17 77.14.19 x86_64
=Sum: Libraries for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>Little cms is a small speed optimized color management engine.
</p>
-Des:
##----------------------------------------
=Pkg: libldap-2_4-2 2.4.26 0.12.1 x86_64
=Sum: OpenLDAP Client Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenLDAP client libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libldap-2_4-2-32bit 2.4.26 0.12.1 x86_64
=Sum: OpenLDAP Client Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenLDAP client libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libldapcpp1 0.3.0 0.6.88 x86_64
=Sum: C++ API pro LDAPv3
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ library for accessing LDAP (Version 3) Servers
</p>
-Des:
##----------------------------------------
=Pkg: libldb1 3.6.3 0.18.3 x86_64
=Sum: Samba ldb Library
+Des:
<!-- DT:Rich -->
<p>This package includes the ldb library.
</p>
-Des:
##----------------------------------------
=Pkg: libldb1-32bit 3.6.3 0.18.3 x86_64
=Sum: Samba ldb Library
+Des:
<!-- DT:Rich -->
<p>This package includes the ldb library.
</p>
-Des:
##----------------------------------------
=Pkg: liblog4c3 1.2.1 10.34 x86_64
=Sum: A library of C for flexible logging to files, syslog and other destinations
+Des:
<!-- DT:Rich -->
<p>Log4c is a library of C for flexible logging to files, syslog and other
destinations. It is modeled after the Log for Java library
(http://jakarta.apache.org/log4j/), staying as close to their API as is
reasonable.
</p>
-Des:
##----------------------------------------
=Pkg: libloudmouth-1-0 1.4.2 3.20 x86_64
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It is designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: liblouis0 1.7.0 1.2.42 x86_64
=Sum: Braille Translator and Back-Translator
+Des:
<!-- DT:Rich -->
<p>Liblouis is an open-source braille translator and back-translator.
It features support for computer and literary braille, supports
contracted and uncontracted translation for many, many languages
and has support for hyphenation. New languages can easily be added
through tables that support a rule- or dictionary based approach.
</p><p>
Liblouis also supports math braille (Nemeth and Marburg). The
formatting of braille is provided by the companion project
liblouisxml.
</p><p>
Liblouis is based on the translation routines in the BRLTTY
screenreader for Linux. It has, however, gone far beyond these
routines. It is named in honor of Louis Braille.
</p>
-Des:
##----------------------------------------
=Pkg: liblpsolve55 5.5.0.13 2.22 x86_64
=Sum: A Mixed Integer Linear Programming (MILP) Solver Library
+Des:
<!-- DT:Rich -->
<p>Mixed Integer Linear Programming (MILP) solver library lpsolve solves pure linear, (mixed) integer/binary, semi-continuous and special ordered sets (SOS) models.
</p>
-Des:
##----------------------------------------
=Pkg: libltdl7 2.2.6 2.131.1 x86_64
=Sum: Libtool Runtime Library
+Des:
<!-- DT:Rich -->
<p>Library needed by programs that use the ltdl interface of GNU libtool.
</p>
-Des:
##----------------------------------------
=Pkg: libltdl7-32bit 2.2.6 2.131.1 x86_64
=Sum: Libtool Runtime Library
+Des:
<!-- DT:Rich -->
<p>Library needed by programs that use the ltdl interface of GNU libtool.
</p>
-Des:
##----------------------------------------
=Pkg: liblua5_1 5.1.4 1.15 x86_64
=Sum: Small Embeddable Language with Simple Procedural Syntax
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from byte codes, and has automatic memory management, making it ideal for configuration, scripting, and rapid prototyping. Lua is implemented as a small library of C functions, written in ANSI C, and the implementation goals are simplicity, efficiency, portability, and low embedding cost.
</p>
-Des:
##----------------------------------------
=Pkg: liblzma5-32bit 5.0.3 0.12.1 x86_64
=Sum: LZMA library
+Des:
<!-- DT:Rich -->
<p>Library for encoding/decoding LZMA files.
</p>
-Des:
##----------------------------------------
=Pkg: liblzma5 5.0.3 0.12.1 x86_64
=Sum: LZMA library
+Des:
<!-- DT:Rich -->
<p>Library for encoding/decoding LZMA files.
</p>
-Des:
##----------------------------------------
=Pkg: liblzmadec0 4.32.7 1.25 x86_64
=Sum: LZMA decoder library
+Des:
<!-- DT:Rich -->
<p>Decoding library for LZMA
</p>
-Des:
##----------------------------------------
=Pkg: liblzo2-2 2.03 3.18 x86_64
=Sum: Realtimová kompresní knihovna
+Des:
<!-- DT:Rich -->
<p>LZO je přenositelná bezztrátová kompresní knihovna napsaná v ANSI C. Umožňuje skutečně rychlou kompresi a velmi rychlou dekompresi, která nemá nároky na paměť.
LZO je využívání pro kompresi a dekompresi v reálném čase.
</p>
-Des:
##----------------------------------------
=Pkg: liblzo2-2-32bit 2.03 3.18 x86_64
=Sum: Realtimová kompresní knihovna
+Des:
<!-- DT:Rich -->
<p>LZO je přenositelná bezztrátová kompresní knihovna napsaná v ANSI C. Umožňuje skutečně rychlou kompresi a velmi rychlou dekompresi, která nemá nároky na paměť.
LZO je využívání pro kompresi a dekompresi v reálném čase.
</p>
-Des:
##----------------------------------------
=Pkg: libmalaga7 7.12 2.18.2 x86_64
=Sum: A Grammar Development Environment for Natural Languages
+Des:
<!-- DT:Rich -->
<p>Malaga is a software package for the development and application of grammars that are used for the analysis of words and sentences
of natural languages. It contains a programming language for the
modelling of morphology and syntax grammars.
</p><p>
Malaga is based on the grammatical theory of the &quot;Left Associative Grammar&quot;
(LAG), developed by Roland Hausser, professor for Computational Linguistics at
University of Erlangen, Germany.
</p>
-Des:
##----------------------------------------
=Pkg: libmcrypt 2.5.8 43.21 x86_64
=Sum: Knihovna pro šifrování dat
+Des:
<!-- DT:Rich -->
<p>Libmcrypt  is a data encryption library.  The library
is thread safe and provides encryption and decryption
functions. This version of the library supports many
encryption algorithms and encryption modes. Supported algorithms
include SERPENT, RIJNDAEL, 3DES, GOST,
SAFER+, CAST-256, RC2, XTEA, 3WAY, TWOFISH, BLOWFISH, ARC.
FOUR, and WAKE.
</p>
-Des:
##----------------------------------------
=Pkg: libmikmod 3.1.11a 116.2.1 x86_64
=Sum: MikMod Sound Library
+Des:
<!-- DT:Rich -->
<p>Libmikmod is a portable sound library, capable of playing samples
as well as module files. It was originally written by Jean-Paul Mikkers
(MikMak) for DOS. It supports OSS /dev/dsp, ALSA, and Esound and can
also write wav files. Supported file formats include mod, stm,
s3m, mtm, xm, and it.
</p>
-Des:
##----------------------------------------
=Pkg: libmikmod-32bit 3.1.11a 116.2.1 x86_64
=Sum: MikMod Sound Library
+Des:
<!-- DT:Rich -->
<p>Libmikmod is a portable sound library, capable of playing samples
as well as module files. It was originally written by Jean-Paul Mikkers
(MikMak) for DOS. It supports OSS /dev/dsp, ALSA, and Esound and can
also write wav files. Supported file formats include mod, stm,
s3m, mtm, xm, and it.
</p>
-Des:
##----------------------------------------
=Pkg: libmng 1.0.10 46.18 x86_64
=Sum: Knihovna pro podporu formátů MNG a JNG
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats that contain animated pictures.
These formats should replace the GIF format.
</p>
-Des:
##----------------------------------------
=Pkg: libmng-32bit 1.0.10 46.18 x86_64
=Sum: Knihovna pro podporu formátů MNG a JNG
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats that contain animated pictures.
These formats should replace the GIF format.
</p>
-Des:
##----------------------------------------
=Pkg: libmodplug1 0.8.8.4 2.5.17 x86_64
=Sum: A MOD playing library
+Des:
<!-- DT:Rich -->
<p>Libmodplug is the library behind -- Modplug-XMMS is a fully featured, complete
input plugin for XMMS which plays mod-like music formats. It is based on the
mod rendering code from ModPlug, a popular windows mod player written by
Olivier Lapicque, found at http://www.modplug.com/.
</p>
-Des:
##----------------------------------------
=Pkg: libmoon0 2.4.1 0.5.1 x86_64
=Sum: Novell Moonlight
+Des:
<!-- DT:Rich -->
<p>Moonlight is an open source implementation of Microsoft Silverlight for Unix systems.
</p>
-Des:
##----------------------------------------
=Pkg: libmpcdec5 1.2.6 4.22 x86_64
=Sum: Musepack Audio Decoder
+Des:
<!-- DT:Rich -->
<p>Musepack is an audio compression format with a strong emphasis on high quality. It is not lossless, but it is designed for transparency, so that you cannot hear differences between the original WAV file and the much smaller MPC file.
</p><p>
It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code.
</p><p>
Musepack is not particularly optimized for low bit rates. The encoder was designed to be transparent at the --standard setting, thus little low bit rate tuning has gone into the codec, unlike that of AAC, Vorbis, WMA, and others that focus more on this region.
</p>
-Des:
##----------------------------------------
=Pkg: libmpfr1 2.3.2 3.115 x86_64
=Sum: MPFR multiple-precision floating-point computation shared library
+Des:
<!-- DT:Rich -->
<p>The MPFR library is a C library for multiple-precision floating-point computations with exact rounding (also called correct rounding). It is based on the GMP multiple-precision library.
</p>
-Des:
##----------------------------------------
=Pkg: libmsn0_1 3.9.97 1.3.1 x86_64
=Sum: Reusable, open-source library for MSN Messenger
+Des:
<!-- DT:Rich -->
<p>Libmsn is a reusable, open-source, fully documented library for connecting to Microsoft&#39;s MSN Messenger service.
</p>
-Des:
##----------------------------------------
=Pkg: libmspack0 0.0.20060920alpha 66.8 x86_64
=Sum: Library That Implements Different Microsoft Compressions
+Des:
<!-- DT:Rich -->
<p>Účelem libmspack je poskytnout kompresi i dekompresi některých ztrátových formátů používaných společností Microsoft. V současnosti jsou podporovány nejobvyklejší formáty.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp8 0.3.4 2.19 x86_64
=Sum: Library for accessing MTP Players
+Des:
<!-- DT:Rich -->
<p>This package contain the libraries that allow access to USB based media players based on the MTP (Media TransferProtocol) authored by Microsoft.
</p><p>
Common devices using this technology are Creative Zen, iRiver, Samsung and others.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz4 2.1.5 5.18 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable audio CD, MP3 and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient15-32bit 5.0.94 0.2.4.1 x86_64
=Sum: Sdílené knihovny pro MySQL
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje dynamické knihovny (*.so*), které některé programy
a programovací jazyky potřebují pro dynamický přístup k MySQL.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient15 5.0.94 0.2.4.1 x86_64
=Sum: Sdílené knihovny pro MySQL
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje dynamické knihovny (*.so*), které některé programy
a programovací jazyky potřebují pro dynamický přístup k MySQL.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient_r15-32bit 5.0.94 0.2.4.1 x86_64
=Sum: Skutečně víceuživatelský a vícevláknový databázový SQL server
+Des:
<!-- DT:Rich -->
<p>SQL je nejpopulárnější databázový jazyk na světě. MySQL je implementace
databázového systému používající přístup klient/server. Sestává ze
serverového démona mysqld a množství dalších klientských programů
a knihoven.
</p><p>
Hlavními cíli MySQL jsou rychlost, robustnost a snadnost použití. Systém
MySQL byl vyvinut, protože vývojáři v TcX potřebovali SQL server, který
by mohl zpracovávat velmi rozsáhlé databáze rychlostí o řád vyšší, než
jakou nabízely ostatní databázové systémy. Od roku 1996 používají MySQL
v prostředí s více než 40 databázemi obsahujícími 10 000 tabulek, z nichž
více než 500 má více než 7 miliónů řádků. Celkem se jedná o přibližně
100 gigabytů životně důležitých dat.
</p><p>
MySQL je založena na sadě funkcí, které jsou používány po mnoho let ve
vysoce náročném výrobním prostředí. Přestože je MySQL v neustálém vývoji,
již nyní poskytuje bohatou a vysoce užitečnou sadu funkcí.
</p><p>
Oficiální výslovnost je &quot;maj es kjů el&quot; (nikoli MY-SEQUEL).
</p><p>
Tento balíček obsahuje pouze serverovou část.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient_r15 5.0.94 0.2.4.1 x86_64
=Sum: Skutečně víceuživatelský a vícevláknový databázový SQL server
+Des:
<!-- DT:Rich -->
<p>SQL je nejpopulárnější databázový jazyk na světě. MySQL je implementace
databázového systému používající přístup klient/server. Sestává ze
serverového démona mysqld a množství dalších klientských programů
a knihoven.
</p><p>
Hlavními cíli MySQL jsou rychlost, robustnost a snadnost použití. Systém
MySQL byl vyvinut, protože vývojáři v TcX potřebovali SQL server, který
by mohl zpracovávat velmi rozsáhlé databáze rychlostí o řád vyšší, než
jakou nabízely ostatní databázové systémy. Od roku 1996 používají MySQL
v prostředí s více než 40 databázemi obsahujícími 10 000 tabulek, z nichž
více než 500 má více než 7 miliónů řádků. Celkem se jedná o přibližně
100 gigabytů životně důležitých dat.
</p><p>
MySQL je založena na sadě funkcí, které jsou používány po mnoho let ve
vysoce náročném výrobním prostředí. Přestože je MySQL v neustálém vývoji,
již nyní poskytuje bohatou a vysoce užitečnou sadu funkcí.
</p><p>
Oficiální výslovnost je &quot;maj es kjů el&quot; (nikoli MY-SEQUEL).
</p><p>
Tento balíček obsahuje pouze serverovou část.
</p>
-Des:
##----------------------------------------
=Pkg: libncurses5-32bit 5.6 90.55 x86_64
=Sum: The New curses Libraries
+Des:
<!-- DT:Rich -->
<p>The ncurses library is used by the most curses based terminal applications
for controling its output and input to the screen.
</p>
-Des:
##----------------------------------------
=Pkg: libncurses5 5.6 90.55 x86_64
=Sum: The New curses Libraries
+Des:
<!-- DT:Rich -->
<p>The ncurses library is used by the most curses based terminal applications
for controling its output and input to the screen.
</p>
-Des:
##----------------------------------------
=Pkg: libncurses6-32bit 5.6 90.55 x86_64
=Sum: The New curses Libraries
+Des:
<!-- DT:Rich -->
<p>The ncurses library is used by the most curses based terminal applications
for controling its output and input to the screen.
</p>
-Des:
##----------------------------------------
=Pkg: libncurses6 5.6 90.55 x86_64
=Sum: The New curses Libraries
+Des:
<!-- DT:Rich -->
<p>The ncurses library is used by the most curses based terminal applications
for controling its output and input to the screen.
</p>
-Des:
##----------------------------------------
=Pkg: libneon27 0.29.6 6.7.1 x86_64
=Sum: Klientská knihovna pro HTTP a WebDAV
+Des:
<!-- DT:Rich -->
<p>neon je knihovna s céčkovým rozhraním. Mezi hlavní funkce patří:
neon je knihovna s céčkovým rozhraním. Mezi hlavní funkce patří:<ul>
<li>Vysokoúrovňové rozhraní pro HTTP a WebDAV metody (PUT, GET, HEAD atd.)
</li><li>Nízkoúrovňové rozhraní pro zpracování HTTP dotazů - pro jednoduchou implementaci nových metod
</li><li>HTTP/1.1 a HTTP/1.0 spojení
</li><li>RFC2617 basic a digest autentikace (včetně auth-int, md5-sess)
</li><li>Podpora proxy (včetně autentikace)
</li><li>Obecný WebDAV 207 XML mechanismus pro zpracování odpovědí
</li><li>XML parsery expat nebo libxml
</li><li>Jednoduché generování chybových hlášení z 207
</li><li>WebDAV manipulace se zdroji: MOVE, COPY, DELETE, MKCOL.
</li><li>WebDAV podpora metadat: nastavuje a odstraňuje vlastnosti
(PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libnet 1.1.2.1 140.22 x86_64
=Sum: A C Library for Portable Packet Creation
+Des:
<!-- DT:Rich -->
<p>LIbnet je knihovna pro vytváření a práci se síťovými pakety. Vytváří
přenosné prostředí pro nízkoúrovňové generování paketů. Obsahuje funkce
pro tvorbu paketů vrstvy IP a link, stejně jako velké množství podpůrných a
potřebných funkcí.
Je velice praktická pro vytváření síťových nástrojů a programů testujících
síť.
</p>
-Des:
##----------------------------------------
=Pkg: libnetcontrol0 0.2.4 0.7.6 x86_64
=Sum: A network configuration library
+Des:
<!-- DT:Rich -->
<p>A interim network configuration library, currently implementing
the libnetcf interface for libvirt.
</p><p>
The libnetcontrol0 package provides the shared library.
</p>
-Des:
##----------------------------------------
=Pkg: libnetcontrol0-32bit 0.2.4 0.7.6 x86_64
=Sum: A network configuration library
+Des:
<!-- DT:Rich -->
<p>A interim network configuration library, currently implementing
the libnetcf interface for libvirt.
</p><p>
The libnetcontrol0 package provides the shared library.
</p>
-Des:
##----------------------------------------
=Pkg: libnetpbm10 10.26.44 101.9.1 x86_64
=Sum: Knihovny pro grafický formát netpbm (NetPortableBitmap)
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje knihovny pro práci s grafickým formátem netpbm.
Programy pro práci s tímto formátem naleznete v balíčku netpbm.
Zdrojové texty jsou obsaženy ve zdrojovém balíčku netpbm.
</p>
-Des:
##----------------------------------------
=Pkg: libnetpbm10-32bit 10.26.44 101.9.1 x86_64
=Sum: Knihovny pro grafický formát netpbm (NetPortableBitmap)
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje knihovny pro práci s grafickým formátem netpbm.
Programy pro práci s tímto formátem naleznete v balíčku netpbm.
Zdrojové texty jsou obsaženy ve zdrojovém balíčku netpbm.
</p>
-Des:
##----------------------------------------
=Pkg: libnewt0_52 0.52.10 1.35.7 x86_64
=Sum: Shared libraries for Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries needed by programs built with newt.
</p><p>
Newt is a programming library for color text-mode widget-based user interfaces.  Newt can be used to add stacked windows, entry widgets, check boxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libnice0 0.0.9 1.1.181 x86_64
=Sum: Interactive Connectivity Establishment implementation
+Des:
<!-- DT:Rich -->
<p>libnice is an implementation of the IETF&#39;s draft Interactive Connectivity Establishment standard (ICE).
</p>
-Des:
##----------------------------------------
=Pkg: libnjb 2.2.6 26.24 x86_64
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnjb5 2.2.6 26.24 x86_64
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnl 1.1 49.18 x86_64
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libnl-32bit 1.1 49.22.4.1 x86_64
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify 0.4.4 173.29.28.1 x86_64
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify1 0.4.4 173.29.28.1 x86_64
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify1-32bit 0.4.4 173.29.28.1 x86_64
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd 2.0.2 73.18 x86_64
=Sum: Knihovna s podporou komunika s nscd pro aplikace
+Des:
<!-- DT:Rich -->
<p>This library provides an interface for applications to NSCD (Name Service Cache Daemon) and allowsthose applications, to flushthe cache for special services, if they have the necessary permissions.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd-32bit 2.0.2 73.18 x86_64
=Sum: Knihovna s podporou komunika s nscd pro aplikace
+Des:
<!-- DT:Rich -->
<p>This library provides an interface for applications to NSCD (Name Service Cache Daemon) and allowsthose applications, to flushthe cache for special services, if they have the necessary permissions.
</p>
-Des:
##----------------------------------------
=Pkg: libnsssharedhelper0 1.0.6 1.6 x86_64
=Sum: Helper functions for sharing NSS database
+Des:
<!-- DT:Rich -->
<p>This library provides helper functions for programs that want to share
an NSS crypto database.
</p>
-Des:
##----------------------------------------
=Pkg: libnsssharedhelper0-32bit 1.0.6 1.6 x86_64
=Sum: Helper functions for sharing NSS database
+Des:
<!-- DT:Rich -->
<p>This library provides helper functions for programs that want to share
an NSS crypto database.
</p>
-Des:
##----------------------------------------
=Pkg: libnuma1 2.0.7 0.7.27 x86_64
=Sum: NUMA Policy Control
+Des:
<!-- DT:Rich -->
<p>Nastavení NUMA pravidel pro jednotlivé procesy.
Nabízí libnuma pro NUMA pravidla v aplikacích.
</p>
-Des:
##----------------------------------------
=Pkg: libofa0 0.9.3 73.18 x86_64
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libofx 0.9.0 1.26 x86_64
=Sum: OFX Command Parser a API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, &quot;To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it.&quot;
</p>
-Des:
##----------------------------------------
=Pkg: libofx4 0.9.0 1.26 x86_64
=Sum: OFX Command Parser a API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, &quot;To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it.&quot;
</p>
-Des:
##----------------------------------------
=Pkg: libogg0 1.1.3 87.12 x86_64
=Sum: Ogg datový tok (Bitstream) - knihovna
+Des:
<!-- DT:Rich -->
<p>Libogg is a library for manipulating ogg bitstreams.  It handles
both making ogg bitstreams and getting packets from ogg bitstreams.
</p><p>
Ogg is the native bitstream format of the <a href="pkg://libvorbis"> Ogg Vorbis audio codec </a>
and the <a href="pkg://libtheora"> Theora video codec</a>
</p>
-Des:
##----------------------------------------
=Pkg: libogg0-32bit 1.1.3 87.12 x86_64
=Sum: Ogg datový tok (Bitstream) - knihovna
+Des:
<!-- DT:Rich -->
<p>Libogg is a library for manipulating ogg bitstreams.  It handles
both making ogg bitstreams and getting packets from ogg bitstreams.
</p><p>
Ogg is the native bitstream format of the <a href="pkg://libvorbis"> Ogg Vorbis audio codec </a>
and the <a href="pkg://libtheora"> Theora video codec</a>
</p>
-Des:
##----------------------------------------
=Pkg: liboggkate1 0.4.1 11.12.18 x86_64
=Sum: A karaoke and text codec for embedding in Ogg
+Des:
<!-- DT:Rich -->
<p>Kate is a codec for karaoke and text encapsulation for Ogg. Most of the
time, this would be multiplexed with audio/video to carry subtitles,
song lyrics (with or without karaoke data), etc, but doesn&#39;t have to be.
A possible use of a lone Kate stream would be an e-book. Moreover, the
motion feature gives Kate a powerful means to describe arbitrary curves,
so hand drawing of shapes can be achieved.
</p><p>
This was originally meant for karaoke use, but can be used for any
purpose. Motions can be attached to various semantics, like position,
color, etc, so scrolling or fading text can be defined.
</p>
-Des:
##----------------------------------------
=Pkg: liboil 0.3.15 3.10 x86_64
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: liboil-32bit 0.3.15 3.10 x86_64
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk10 0.6.6 2.16 x86_64
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk10-32bit 0.6.6 2.16 x86_64
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: libopenct1 0.6.15 5.20 x86_64
=Sum: Knihovna OpenCT pro čtečky Smart Card
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. OpenCT is used by the OpenSC Smart Card library.
</p><p>
For a list of supported readers, please read documentation in /usr/share/doc/packages/openct/wiki/index.html - some readers may be supported only with particular firmware or particular connection type.
</p><p>
There are other packages that may support your reader in a different way. Name of all these packages starts with &quot;pcsc-&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libopenct1-32bit 0.6.15 5.20 x86_64
=Sum: Knihovna OpenCT pro čtečky Smart Card
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. OpenCT is used by the OpenSC Smart Card library.
</p><p>
For a list of supported readers, please read documentation in /usr/share/doc/packages/openct/wiki/index.html - some readers may be supported only with particular firmware or particular connection type.
</p><p>
There are other packages that may support your reader in a different way. Name of all these packages starts with &quot;pcsc-&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libopenraw1 0.0.5 6.28 x86_64
=Sum: A library to decode digtal camera RAW files
+Des:
<!-- DT:Rich -->
<p>libopenraw is a library that aim at decoding digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: libopensc2 0.11.6 5.27.1 x86_64
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. It mainly focuses on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API. Applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p><p>
Before purchasing any cards, please read carefully documentation in /usr/share/doc/packages/opensc/wiki/index.html - only some cards are supported. Not only card type matters, but also card version, card OS version and preloaded applet. Only subset of possible operations may be supported for your card. Card initialization may require third party proprietary software.
</p>
-Des:
##----------------------------------------
=Pkg: libopensc2-32bit 0.11.6 5.27.1 x86_64
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. It mainly focuses on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API. Applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p><p>
Before purchasing any cards, please read carefully documentation in /usr/share/doc/packages/opensc/wiki/index.html - only some cards are supported. Not only card type matters, but also card version, card OS version and preloaded applet. Only subset of possible operations may be supported for your card. Card initialization may require third party proprietary software.
</p>
-Des:
##----------------------------------------
=Pkg: libopenssl0_9_8 0.9.8j 0.26.1 x86_64
=Sum: Secure Sockets a Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>Projekt OpenSSL je společný pokus o vytvoření robustního,
plnohodnotného, komerčně a celosvětově použitelného Open Source
toolkitu implementujícího protokoly Secure Sockets Layer (SSL
v2/v3) a Transport Layer Security (TLS v1) se silným šifrováním.
Projekt je řízen celosvětovou komunitou dobrovolníků, kteří
používají Internet pro komunikaci, plánování a vývoj toolkitu
OpenSSL včetně jeho dokumentace.
</p><p>
</p><p>
Zdroje a licence
</p><p>
</p><p>
OpenSSL je založeno na excelentní knihovně SSLeay, jejímiž autory
jsou Eric A. Young a Tim J. Hudson. Licence toolkitu OpenSSL je ve
stylu licence serveru Apache, což znamená, že jej lze volně
používat pro nekomerční i komerční účely.
</p>
-Des:
##----------------------------------------
=Pkg: libopenssl0_9_8-32bit 0.9.8j 0.26.1 x86_64
=Sum: Secure Sockets a Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>Projekt OpenSSL je společný pokus o vytvoření robustního,
plnohodnotného, komerčně a celosvětově použitelného Open Source
toolkitu implementujícího protokoly Secure Sockets Layer (SSL
v2/v3) a Transport Layer Security (TLS v1) se silným šifrováním.
Projekt je řízen celosvětovou komunitou dobrovolníků, kteří
používají Internet pro komunikaci, plánování a vývoj toolkitu
OpenSSL včetně jeho dokumentace.
</p><p>
</p><p>
Zdroje a licence
</p><p>
</p><p>
OpenSSL je založeno na excelentní knihovně SSLeay, jejímiž autory
jsou Eric A. Young a Tim J. Hudson. Licence toolkitu OpenSSL je ve
stylu licence serveru Apache, což znamená, že jej lze volně
používat pro nekomerční i komerční účely.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync 0.22 150.21 x86_64
=Sum: A Platform and Distribution Independent Synchronization Framework
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
It consists of several plug-ins that can be used to connect to devices, a powerful sync engine, and the framework itself.
The synchronization framework is kept very flexible and is capable of synchronizing any type of data, including contacts, calendar, tasks, notes, and files.
</p><p>
To sync various sources, additionally install the plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-evolution2 0.22 132.34 x86_64
=Sum: Synchronizační modul Evolution 2 pro OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
Evolution 2.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-file 0.22 37.13 x86_64
=Sum: Modul synchronizace souborů pro OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
files stored on disk.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-gnokii 0.22 178.32.195 x86_64
=Sum: Gnokii Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Nokia cell phones which don&#39;t support SyncML. Based on gnokii library.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-irmc 0.22 155.25 x86_64
=Sum: IrMC Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from cell phones with IrMC support (such as Sony Ericsson K750i, Siemens S55).
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-palm 0.22 44.17 x86_64
=Sum: Palm Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Palm devices.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-syncml 0.22 91.26 x86_64
=Sum: SyncML Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from SyncML based devices.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-tools 0.22 150.21 x86_64
=Sum: Tools for libopensync
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
This package contains some tools needed for testing and debugging it.
</p>
-Des:
##----------------------------------------
=Pkg: liborc-0_4-0 0.4.11 7.5.23 x86_64
=Sum: The Oil Runtime Compiler Library
+Des:
<!-- DT:Rich -->
<p>Orc is a library and set of tools for compiling and executing very simple
programs that operate on arrays of data.  The language is a generic
assembly language that represents many of the features available in SIMD
architectures, including saturated addition and subtraction, and many
arithmetic operations.
</p>
-Des:
##----------------------------------------
=Pkg: liborc-0_4-0-32bit 0.4.11 7.5.23 x86_64
=Sum: The Oil Runtime Compiler Library
+Des:
<!-- DT:Rich -->
<p>Orc is a library and set of tools for compiling and executing very simple
programs that operate on arrays of data.  The language is a generic
assembly language that represents many of the features available in SIMD
architectures, including saturated addition and subtraction, and many
arithmetic operations.
</p>
-Des:
##----------------------------------------
=Pkg: libosip2 3.1.0 1.15 x86_64
=Sum: Implementation of SIP--RFC 3261
+Des:
<!-- DT:Rich -->
<p>This is the GNU oSIP library. It has been designed
to provide the Internet community with a simple way to
support the Session Initiation Protocol. SIP is
described in the RFC 3261, which is available at
http://www.ietf.org/rfc/rfc3261.txt.
</p>
-Des:
##----------------------------------------
=Pkg: libotf 0.9.7 2.17 x86_64
=Sum: Library for Handling OpenType Fonts
+Des:
<!-- DT:Rich -->
<p>Library for handling OpenType fonts.
</p>
-Des:
##----------------------------------------
=Pkg: libotr2 3.2.0 1.16 x86_64
=Sum: "Off The Record" messaging library toolkit
+Des:
<!-- DT:Rich -->
<p>Off-the-Record (OTR) Messaging allows you to have private conversations
over instant messaging by providing:
Encryption
No one else can read your instant messages.
Authentication
You are assured the correspondent is who you think it is.
Deniability
The messages you send do not have digital signatures that are checkable
by a third party. Anyone can forge messages after a conversation to make
them look like they came from you. However, during a conversation, your
correspondent is assured the messages he sees are authentic and
unmodified.
Perfect forward secrecy
If you lose control of your private keys, no previous conversation is
compromised.
</p>
-Des:
##----------------------------------------
=Pkg: libp11-1 0.2.4 3.14 x86_64
=Sum: Library Implementing a Small Layer on Top of PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>Libp11 is a library implementing a small layer on top of PKCS#11 API to make using PKCS#11 implementations easier.
</p><p>
The official name for PKCS#11 is &quot;RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p><p>
Libp11 source code includes the official header files (version 2.20) and thus is &quot;derived from the RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libp11-1-32bit 0.2.4 3.14 x86_64
=Sum: Library Implementing a Small Layer on Top of PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>Libp11 is a library implementing a small layer on top of PKCS#11 API to make using PKCS#11 implementations easier.
</p><p>
The official name for PKCS#11 is &quot;RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p><p>
Libp11 source code includes the official header files (version 2.20) and thus is &quot;derived from the RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libpackagekit-glib10 0.3.14 2.23.126 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: libpangomm-1_4-1 2.26.0 1.1.358 x86_64
=Sum: C++ interface for pango
+Des:
<!-- DT:Rich -->
<p>pangomm provides a C++ interface to the pango library.
</p>
-Des:
##----------------------------------------
=Pkg: libpath_utils1 0.2.1 1.6.1 x86_64
=Sum: Filesystem Path Utilities
+Des:
<!-- DT:Rich -->
<p>Utility functions to manipulate filesystem pathnames
</p>
-Des:
##----------------------------------------
=Pkg: libpcap0 0.9.8 50.6.2 x86_64
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>Libpcap je knihovna používaná programy pro zachycování paketů. Poskytuje
jim rozhraní pro zachycování a analýzu paketů ze síťových zařízení.
Balíček je potřeba pouze pro překlad programů, které zpracovávají síťový
provoz nebo pro vytváření vlastních programů s touto funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap0-32bit 0.9.8 50.6.2 x86_64
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>Libpcap je knihovna používaná programy pro zachycování paketů. Poskytuje
jim rozhraní pro zachycování a analýzu paketů ze síťových zařízení.
Balíček je potřeba pouze pro překlad programů, které zpracovávají síťový
provoz nebo pro vytváření vlastních programů s touto funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: libpciaccess0-32bit 7.4_0.11.0 0.4.6.1 x86_64
=Sum: pciaccess library
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>pciaccess library.
</p>
-Des:
##----------------------------------------
=Pkg: libpciaccess0 7.4_0.11.0 0.4.6.1 x86_64
=Sum: pciaccess library
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>pciaccess library.
</p>
-Des:
##----------------------------------------
=Pkg: libpciaccess0-devel 7.4_0.11.0 0.4.6.1 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libphonon4-32bit 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: libphonon4 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: libpisock9 0.12.3 2.26 x86_64
=Sum: Pilot-Link Library for Palm devices
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
If you want to develop Palm synchronization applications, you
will need to install libpisock-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libpisync1 0.12.3 2.26 x86_64
=Sum: Pilot-Link based Synchronization Library for Palm devices
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
If you want to develop Palm synchronization applications, you
will need to install libpisock-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libpixman-1-0 0.16.0 1.2.22 x86_64
=Sum: Pixel manipulation library
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: libpixman-1-0-32bit 0.16.0 1.2.22 x86_64
=Sum: Pixel manipulation library
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: libpixman-1-0-devel 0.16.0 1.2.22 x86_64
=Sum: Pixel manipulation library - development files
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: libpkcs11-helper1 1.06 1.15 x86_64
=Sum: Helper Library for the Use with Smart Cards and the PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>pkcs11-helper allows using multiple PKCS#11 providers at the same time, selecting keys by id, label or certificate subject, handling card removal and card insert events, handling card re-insert to a different slot, supporting session expiration serialization and much more, all using a simple API.
</p>
-Des:
##----------------------------------------
=Pkg: libpkcs11-helper1-32bit 1.06 1.15 x86_64
=Sum: Helper Library for the Use with Smart Cards and the PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>pkcs11-helper allows using multiple PKCS#11 providers at the same time, selecting keys by id, label or certificate subject, handling card removal and card insert events, handling card re-insert to a different slot, supporting session expiration serialization and much more, all using a simple API.
</p>
-Des:
##----------------------------------------
=Pkg: libplist++1 1.3 8.4.4.9 x86_64
=Sum: Library for handling Apple Binary and XML Property Lists
+Des:
<!-- DT:Rich -->
<p>libplist is a library for handling Apple Binary and XML Property Lists.
</p>
-Des:
##----------------------------------------
=Pkg: libplist1 1.3 8.4.4.9 x86_64
=Sum: Library for handling Apple Binary and XML Property Lists
+Des:
<!-- DT:Rich -->
<p>libplist is a library for handling Apple Binary and XML Property Lists.
</p>
-Des:
##----------------------------------------
=Pkg: libpng-devel 1.2.31 5.25.1 x86_64
=Sum: Development Tools for applications which will use the Libpng
+Des:
<!-- DT:Rich -->
<p>The libpng-devel package includes the header files, libraries, configuration files and development tools necessary for compiling and linking programs which will manipulate PNG files using libpng.
</p><p>
libpng is the official reference library for the Portable Network Graphics (PNG) format.
</p>
-Des:
##----------------------------------------
=Pkg: libpng12-0 1.2.31 5.25.1 x86_64
=Sum: Library for the Portable Network Graphics Format (PNG)
+Des:
<!-- DT:Rich -->
<p>libpng is the official reference library for the Portable Network Graphics format (PNG).
</p>
-Des:
##----------------------------------------
=Pkg: libpng12-0-32bit 1.2.31 5.25.1 x86_64
=Sum: Library for the Portable Network Graphics Format (PNG)
+Des:
<!-- DT:Rich -->
<p>libpng is the official reference library for the Portable Network Graphics format (PNG).
</p>
-Des:
##----------------------------------------
=Pkg: libpolkit-qt0 0.9.2 3.1.92 x86_64
=Sum: PolicyKit Library Qt Bindings
+Des:
<!-- DT:Rich -->
<p>Polkit-qt aims to make it easy for Qt developers to take advantage of PolicyKit API. It is a convenience wrapper around QAction and QAbstractButton that lets you integrate those two components easily with PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: libpolkit-qt0-32bit 0.9.2 3.1.92 x86_64
=Sum: PolicyKit Library Qt Bindings
+Des:
<!-- DT:Rich -->
<p>Polkit-qt aims to make it easy for Qt developers to take advantage of PolicyKit API. It is a convenience wrapper around QAction and QAbstractButton that lets you integrate those two components easily with PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-glib4 0.12.3 1.3.1 x86_64
=Sum: PDF Rendering Library - GLib Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-qt4-3 0.12.3 1.3.1 x86_64
=Sum: PDF Rendering Library - Qt4 Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler5 0.12.3 1.3.1 x86_64
=Sum: PDF Rendering Library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy0 0.3.1 1.1.42 x86_64
=Sum: libproxy is a library that provides automatic proxy configuration management
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libproxy0-32bit 0.3.1 1.1.42 x86_64
=Sum: libproxy is a library that provides automatic proxy configuration management
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libproxy0-config-gnome 0.3.1 1.1.111 x86_64
=Sum: Libproxy module for GNOME configuration
+Des:
<!-- DT:Rich -->
<p>A module to extend libproxy with capabilities to query GNOME about
proxy settings.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy0-config-gnome-32bit 0.3.1 1.1.111 x86_64
=Sum: Libproxy module for GNOME configuration
+Des:
<!-- DT:Rich -->
<p>A module to extend libproxy with capabilities to query GNOME about
proxy settings.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy0-config-kde4 0.3.1 1.1.111 x86_64
=Sum: Libproxy module for KDE configuration
+Des:
<!-- DT:Rich -->
<p>A module to extend libproxy with capabilities to query KDE4 about proxy
settings.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy0-networkmanager 0.3.1 1.1.111 x86_64
=Sum: Libproxy plugin for NetworkManager configuration
+Des:
<!-- DT:Rich -->
<p>A plugin to extend libproxy with capabilities to query NetworkManager about proxy settings.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy0-networkmanager-32bit 0.3.1 1.1.111 x86_64
=Sum: Libproxy plugin for NetworkManager configuration
+Des:
<!-- DT:Rich -->
<p>A plugin to extend libproxy with capabilities to query NetworkManager about proxy settings.
</p>
-Des:
##----------------------------------------
=Pkg: libpst4 0.6.44 1.1.43 x86_64
=Sum: A library for reading PST files
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libpt2 2.4.2 2.33 x86_64
=Sum: Portable Windows Library from Equivalence Pty. Ltd. version 2
+Des:
<!-- DT:Rich -->
<p>This is a moderately large class library that was created many years ago
as a method to produce applications that run on both Microsoft Windows and the X Window System.
It is used for the opal project, see www.openh323.org for details.
</p>
-Des:
##----------------------------------------
=Pkg: libpulse-browse0 0.9.23 0.7.128 x86_64
=Sum: PulseAudio network browsing API
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: libpulse-mainloop-glib0 0.9.23 0.7.128 x86_64
=Sum: GLIB 2.0 Main Loop wrapper for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: libpulse0 0.9.23 0.7.128 x86_64
=Sum: Client interface to PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon (ESOUND).
</p><p>
This package contains the system libraries for clients of pulseaudio sound server.
</p>
-Des:
##----------------------------------------
=Pkg: libpulse0-32bit 0.9.23 0.7.128 x86_64
=Sum: Client interface to PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon (ESOUND).
</p><p>
This package contains the system libraries for clients of pulseaudio sound server.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple 2.6.6 0.11.1 x86_64
=Sum: Library for IM Clients Like Pidgin and Finch
+Des:
<!-- DT:Rich -->
<p>libpurple contains the core IM support for IM clients such as Pidgin
and Finch.
</p><p>
libpurple supports a variety of messaging protocols including AIM, MSN,
Yahoo!, Jabber, Bonjour, Gadu-Gadu, ICQ, IRC, Novell Groupwise, QQ,
Lotus Sametime, SILC, Simple and Zephyr.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple-lang 2.6.6 0.11.1 x86_64
=Sum: Library for IM Clients Like Pidgin and Finch
+Des:
<!-- DT:Rich -->
<p>libpurple contains the core IM support for IM clients such as Pidgin
and Finch.
</p><p>
libpurple supports a variety of messaging protocols including AIM, MSN,
Yahoo!, Jabber, Bonjour, Gadu-Gadu, ICQ, IRC, Novell Groupwise, QQ,
Lotus Sametime, SILC, Simple and Zephyr.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple-meanwhile 2.6.6 0.11.1 x86_64
=Sum: Lotus Sametime Plugin for Pidgin Using the Meanwhile Library
+Des:
<!-- DT:Rich -->
<p>Lotus Sametime plugin for Pidgin using the Meanwhile library.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple-tcl 2.6.6 0.11.1 x86_64
=Sum: Library for IM Clients Like Pidgin and Finch
+Des:
<!-- DT:Rich -->
<p>libpurple contains the core IM support for IM clients such as Pidgin
and Finch.
</p><p>
libpurple supports a variety of messaging protocols including AIM, MSN,
Yahoo!, Jabber, Bonjour, Gadu-Gadu, ICQ, IRC, Novell Groupwise, QQ,
Lotus Sametime, SILC, Simple and Zephyr.
</p>
-Des:
##----------------------------------------
=Pkg: libpython2_6-1_0 2.6.0 8.12.2 x86_64
=Sum: Python Interpreter shared library
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
This package contains libpython2.6 shared library for embedding in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: libpython2_6-1_0-32bit 2.6.0 8.12.2 x86_64
=Sum: Python Interpreter shared library
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
This package contains libpython2.6 shared library for embedding in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqca2 2.0.2 13.7.2 x86_64
=Sum: Qt Cryptographic Architecture 2
+Des:
<!-- DT:Rich -->
<p>Tento balíček poskytuje základní kryptografickou architekturu Qt včetně knihovny a modulů pro práci s openssl a SSL/TLS, X509, RSA, SHA1, MD5, Blowfish, 3DES a AES.
</p><p>
Lze rozšířit dalšími moduly např. qca-sasl pro podporu SASL.
</p>
-Des:
##----------------------------------------
=Pkg: libqdialogsolver1 1.3.0 1.5.194 x86_64
=Sum: QDialog class for showing solver results
+Des:
<!-- DT:Rich -->
<p>This package provides a QDialog class for showing solver results
</p>
-Des:
##----------------------------------------
=Pkg: libqimageblitz4 0.0.4 35.25.94 x86_64
=Sum: Image Effect Library for KDE
+Des:
<!-- DT:Rich -->
<p>Blitz is an interm image effect library that people can use until KDE 4.1 is released. KImageEffect, the old image effect class is being dropped for KDE 4.0 and the replacement, Quasar, won&#39;t be ready until KDE 4.1. Blitz gives people something to use in the meantime.
</p>
-Des:
##----------------------------------------
=Pkg: libqscintilla2-5 2.3.2 1.24 x86_64
=Sum: C++ knihovna tříd
+Des:
<!-- DT:Rich -->
<p>QScintilla je Qt port Scintilla C++ editoru tříd Neil Hodgsona.
</p><p>
Jde o port původní Scintilla třídy (http://www.scintilla.org/).
</p><p>
Tento balíček je používán pouze programem eric, IDE pro Python.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-32bit 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-qt3support-32bit 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-qt3support 4.6.3 5.12.1 x86_64
=Sum: C ++ programová knihovna, základní části
+Des:
<!-- DT:Rich -->
<p>Qt je knihovna pro vývoj aplikací s grafickým uživatelským rozhraním.
</p><p>
Tento balíček obsahuje základní nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-32bit 4.6.3 5.12.1 x86_64
=Sum: Qt 4 SQL related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for connection with an SQL server.
You will need also a plugin package for a supported SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql 4.6.3 5.12.1 x86_64
=Sum: Qt 4 SQL related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for connection with an SQL server.
You will need also a plugin package for a supported SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-mysql-32bit 4.6.3 5.10.1 x86_64
=Sum: Qt 4 MySQL podpora
+Des:
<!-- DT:Rich -->
<p>A plugin to support MySQL server in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-mysql 4.6.3 5.10.1 x86_64
=Sum: Qt 4 MySQL podpora
+Des:
<!-- DT:Rich -->
<p>A plugin to support MySQL server in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-postgresql-32bit 4.6.3 5.10.1 x86_64
=Sum: Qt 4 PostgreSQL modul
+Des:
<!-- DT:Rich -->
<p>Qt SQL plugin to support PostgreSQL servers in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-postgresql 4.6.3 5.10.1 x86_64
=Sum: Qt 4 PostgreSQL modul
+Des:
<!-- DT:Rich -->
<p>Qt SQL plugin to support PostgreSQL servers in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-sqlite-32bit 4.6.3 5.12.1 x86_64
=Sum: Qt 4 sqlite modul
+Des:
<!-- DT:Rich -->
<p>Qt 4 sqlite plugin to be able to use database functionality with Qt applications without the need to setup a SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-sqlite 4.6.3 5.12.1 x86_64
=Sum: Qt 4 sqlite modul
+Des:
<!-- DT:Rich -->
<p>Qt 4 sqlite plugin to be able to use database functionality with Qt applications without the need to setup a SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-unixODBC-32bit 4.6.3 5.10.1 x86_64
=Sum: Qt 4 unixODBC plugin
+Des:
<!-- DT:Rich -->
<p>Qt unixODBC plugin to support databases via unixODBC within Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-unixODBC 4.6.3 5.10.1 x86_64
=Sum: Qt 4 unixODBC plugin
+Des:
<!-- DT:Rich -->
<p>Qt unixODBC plugin to support databases via unixODBC within Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-x11-32bit 4.6.3 5.12.1 x86_64
=Sum: Qt 4 GUI related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for drawing widgets and OpenGL items.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-x11 4.6.3 5.12.1 x86_64
=Sum: Qt 4 GUI related libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries which are used for drawing widgets and OpenGL items.
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod0 0.4.2 4.25 x86_64
=Sum: A Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libquicktime 1.0.3 3.34 x86_64
=Sum: A Library for Reading and Writing Quicktime Movie Files
+Des:
<!-- DT:Rich -->
<p>Knihovna pro čtení a zápis filmů Quicktime.
Knihovna je odnoží projektu quicktime4linux.
</p>
-Des:
##----------------------------------------
=Pkg: libraptor1 1.4.18 28.21 x86_64
=Sum: Raptor RDF parsovací nástroje
+Des:
<!-- DT:Rich -->
<p>Raptor is the RDF Parser Toolkit for Redland that provides a set of
standalone RDF parsers, generating triples from RDF/XML or N-Triples.
</p>
-Des:
##----------------------------------------
=Pkg: librasqal1 0.9.16 1.21 x86_64
=Sum: Rasqal RDF Parser Toolkit for Redland
+Des:
<!-- DT:Rich -->
<p>Rasqal is a library providing full support for querying Resource
Description Framework (RDF) including parsing query syntaxes, constructing
the queries, executing them and returning result formats.  It currently
handles the RDF Data Query Language (RDQL) and SPARQL Query language.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-11 2.0.7 3.5.18 x86_64
=Sum: FireWire rozhraní
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides direct
access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-11-32bit 2.0.7 3.5.18 x86_64
=Sum: FireWire rozhraní
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides direct
access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394 2.0.7 3.5.18 x86_64
=Sum: FireWire rozhraní
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides
direct access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-8 1.3.0 17.17 x86_64
=Sum: FireWire rozhraní
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides
direct access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-8-32bit 1.3.0 17.17 x86_64
=Sum: FireWire rozhraní
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides
direct access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libreadline5-32bit 5.2 147.9.13 x86_64
=Sum: Knihovna readline
+Des:
<!-- DT:Rich -->
<p>Knihovna readline je používána např. Bourne Again Shellem (nebo-li bash)
pro pohodlnou editaci příkazové řádky. To zahrnuje historii a
automatické doplňování.
</p>
-Des:
##----------------------------------------
=Pkg: libreadline5 5.2 147.9.13 x86_64
=Sum: Knihovna readline
+Des:
<!-- DT:Rich -->
<p>Knihovna readline je používána např. Bourne Again Shellem (nebo-li bash)
pro pohodlnou editaci příkazové řádky. To zahrnuje historii a
automatické doplňování.
</p>
-Des:
##----------------------------------------
=Pkg: libredland0 1.0.8 1.21 x86_64
=Sum: a set of free software libraries that provide support for the Resource Description Framework (RDF)
+Des:
<!-- DT:Rich -->
<p>Redland is a library that provides a high-level interface for RDF
(Resource Description Framework) implemented in an object-based API.
It is modular and supports different RDF parsers, serializers,
storage and query languages.  Redland is designed for developers to
provide RDF support in their applications as well as a core library
for RDF developers to start with.
</p>
-Des:
##----------------------------------------
=Pkg: libref_array1 0.1.1 1.6.1 x86_64
=Sum: A refcounted array for C
+Des:
<!-- DT:Rich -->
<p>A dynamically-growing, reference-counted array
</p>
-Des:
##----------------------------------------
=Pkg: libreiserfs 0.3.0.5 143.3 x86_64
=Sum: Knihovna pro přístup k ReiserFS
+Des:
<!-- DT:Rich -->
<p>This is a library for reiserfs file system access and manipulation.
The primary goal is to develop the nice, full functionality library
that can be linked to any projects that needed reiserfs file system
access. These include GNU Parted, GNU GRUB, Yaboot, Partimage, and EVMS.
</p><p>
The second goal is high maintainability source code.
</p><p>
The third goal is to develop an alternative set of the reiserfs programs as
small and nice front-ends to this library.
</p><p>
libreiserfs has a number of high level APIs for accessing reiserfs
file systems. There are main file system code (reiserfs_fs_open, reiserfs_fs_close, reiserfs_fs_create, reiserfs_fs_resize, reiserfs_fs_journal_tune, etc), journal code, bitmap code, directories
and files access code, and device abstraction layer.
</p><p>
progsreiserfs supports versions 3.5 and 3.6 with standard and relocated journal.
It also supports all possible block sizes supported by the kernel (2.4.18 with patches or 2.4.19).
</p><p>
The project home page is http://reiserfs.linux.kiev.ua/.
</p>
-Des:
##----------------------------------------
=Pkg: libreiserfs-32bit 0.3.0.5 143.3 x86_64
=Sum: Knihovna pro přístup k ReiserFS
+Des:
<!-- DT:Rich -->
<p>This is a library for reiserfs file system access and manipulation.
The primary goal is to develop the nice, full functionality library
that can be linked to any projects that needed reiserfs file system
access. These include GNU Parted, GNU GRUB, Yaboot, Partimage, and EVMS.
</p><p>
The second goal is high maintainability source code.
</p><p>
The third goal is to develop an alternative set of the reiserfs programs as
small and nice front-ends to this library.
</p><p>
libreiserfs has a number of high level APIs for accessing reiserfs
file systems. There are main file system code (reiserfs_fs_open, reiserfs_fs_close, reiserfs_fs_create, reiserfs_fs_resize, reiserfs_fs_journal_tune, etc), journal code, bitmap code, directories
and files access code, and device abstraction layer.
</p><p>
progsreiserfs supports versions 3.5 and 3.6 with standard and relocated journal.
It also supports all possible block sizes supported by the kernel (2.4.18 with patches or 2.4.19).
</p><p>
The project home page is http://reiserfs.linux.kiev.ua/.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice 3.4.2.6 0.28.1 x86_64
=Sum: A Free Office Suite
+Des:
<!-- DT:Rich -->
<p>Komplexní kancelářský balík s textovým procesorem, tabulkovým kalkulátorem,
programem pro tvorbu prezentací a další.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-base 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Base
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to manage databases, create queries and reports
to track and manage your information by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-base-drivers-postgresql 3.4.2.6 0.28.1 x86_64
=Sum: PostgreSQL Database Driver for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package allows to access PostgreSQL databases from LibreOffice
Base.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-base-extensions 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Base Extensions
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides extensions for LibreOffice Base:
<ul>
<li>Sun Report Builder
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-calc 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Calc
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to perform calculation, analyze information and
manage lists in spreadsheets by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-calc-extensions 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Calc Extensions
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides extensions for LibreOffice Calc:
<ul>
<li>Optimization Solver
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-draw 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Draw
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to create and edit drawings, flow charts, and
logos by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-draw-extensions 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Impress Extensions
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides extensions for LibreOffice Impress:
<ul>
<li>PDF Import
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-filters-optional 3.4.2.6 0.28.1 x86_64
=Sum: Additional Import and Export Filters for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This package includes some additional import and export filters for
LibreOffice:
<ul>
<li>AportisDoc (Palm)

</li><li>Pocket Excel

</li><li>Pocket Word

</li><li>DocBook

</li><li>XHTML
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-gnome 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Core Libraries
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides core libraries used by all LibreOffice modules.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-impress 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Impress
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to create and edit presentations for slideshows,
meeting and Web pages by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-impress-extensions 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Impress Extensions
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides extensions for LibreOffice Impress:
<ul>
<li>Presentation Minimizer

</li><li>Presenter Console
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-kde 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Core Libraries
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides core libraries used by all LibreOffice modules.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-kde4 3.4.2.6 0.28.1 x86_64
=Sum: KDE rozšíření pro OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>KDE rozšíření pro OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-mailmerge 3.4.2.6 0.28.1 x86_64
=Sum: Mail Merge Functionality for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to create form letters or send E-mail messages
to many recipients using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-math 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Math
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to create and edit scientific formulas and
equations by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-mono 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice UNO Runtime Environment
+Des:
<!-- DT:Rich -->
<p></p><p>
UNO is the basic technology used by LibreOffice. It allows to integrate
modules written in various programming languages.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-officebean 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Components
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides functionality used by all the LibreOffice
modules.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-pyuno 3.4.2.6 0.28.1 x86_64
=Sum: Python UNO Bridge for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
The Python-UNO bridge allows to use the standard LibreOffice API from
the well known Python scripting language. It can be used to develop UNO
components in python, thus python UNO components may be run within the
LibreOffice process and can be called from Java, C++ or the built in
StarBasic scripting language. You can create and invoke scripts with
the office scripting framework (OOo 2.0 and later) with it. For
example, it is used for the mail merge functionality.
</p><p>
You can find the more information at
http://udk.openoffice.org/python/python-bridge.html
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-writer 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Writer and Web
+Des:
<!-- DT:Rich -->
<p></p><p>
This module allows you to create and edit text and graphics in letters,
reports, documents and Web pages by using LibreOffice office suite.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-writer-extensions 3.4.2.6 0.28.1 x86_64
=Sum: LibreOffice Writer Extensions
+Des:
<!-- DT:Rich -->
<p></p><p>
This package provides extensions for LibreOffice Writer:
<ul>
<li>MediaWiki Publisher
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: librpcsecgss 0.18 1.15 x86_64
=Sum: Library Implementing GSSAPI Security for ONC RPC
+Des:
<!-- DT:Rich -->
<p>This library implements the GSS security mechanism for ONC RPC.
It can be used to provide strong authentication and security for NFS.
</p>
-Des:
##----------------------------------------
=Pkg: librsvg 2.26.0 2.3.1 x86_64
=Sum: Knihovna pro renderování SVG
+Des:
<!-- DT:Rich -->
<p>This package contains a library to render SVG (scalable vector graphics)
data. This format has been specified by the W3C (see http://www.w3c.org).
</p>
-Des:
##----------------------------------------
=Pkg: librsvg-32bit 2.26.0 2.3.1 x86_64
=Sum: Knihovna pro renderování SVG
+Des:
<!-- DT:Rich -->
<p>This package contains a library to render SVG (scalable vector graphics)
data. This format has been specified by the W3C (see http://www.w3c.org).
</p>
-Des:
##----------------------------------------
=Pkg: librsync 0.9.7 103.8 x86_64
=Sum: A Library for Generating Network Deltas
+Des:
<!-- DT:Rich -->
<p>librsync implements the &quot;rsync&quot; algorithm, which allows remote differencing of binary files.  librsync computes a delta relative to a file&#39;s checksum, so the two files need not both be present to generate a delta.
</p>
-Des:
##----------------------------------------
=Pkg: libsamplerate 0.1.4 1.15 x86_64
=Sum: A Sample Rate Converter Library
+Des:
<!-- DT:Rich -->
<p>Secret Rabbit Code (aka libsamplerate) je konverter zvukové vzorkovací
frekvence. Například převzorkování z CD 44.1kHz do DAT 48kHz. 
</p>
-Des:
##----------------------------------------
=Pkg: libsamplerate-32bit 0.1.4 1.15 x86_64
=Sum: A Sample Rate Converter Library
+Des:
<!-- DT:Rich -->
<p>Secret Rabbit Code (aka libsamplerate) je konverter zvukové vzorkovací
frekvence. Například převzorkování z CD 44.1kHz do DAT 48kHz. 
</p>
-Des:
##----------------------------------------
=Pkg: libsblim-cmpiutil1 1.0.1 2.15 x86_64
=Sum: utility library for cmpi development
+Des:
<!-- DT:Rich -->
<p>A set of utility functions that make cmpi provider development easier
</p>
-Des:
##----------------------------------------
=Pkg: libschroedinger-1_0-0 1.0.10 8.5.14 x86_64
=Sum: Library for decoding and encoding video in the Dirac format
+Des:
<!-- DT:Rich -->
<p>The Schroedinger project implements portable libraries for the high quality
Dirac video codec created by BBC Research and Development. Dirac is a free
and open source codec producing very high image quality video. The project
produces two libraries in ANSI C89, one for decoding and one for encoding.
</p>
-Des:
##----------------------------------------
=Pkg: libseed0 2.28.1 0.1.70 x86_64
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: libselinux1 2.0.91 4.2.1 x86_64
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: libselinux1-32bit 2.0.91 4.2.1 x86_64
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors3 2.10.6 10.15 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors3-32bit 2.10.6 10.15 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors4 3.3.0 2.7.13 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors4-32bit 3.3.0 2.7.13 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsepol1 2.0.41 2.2.9 x86_64
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsepol1-32bit 2.0.41 2.2.9 x86_64
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsexy 0.1.11 168.26 x86_64
=Sum: Extended Widgets for GTK+
+Des:
<!-- DT:Rich -->
<p>A set of extensions on top of GTK+ widgets, to provide extra functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libshout3 2.2.2 116.32 x86_64
=Sum: Knihovna pro komunikaci s icecast serverem
+Des:
<!-- DT:Rich -->
<p>Libshout is a library for communicating with and sending data to an icecast server.  It handles the socket connection, the timing of the data, and prevents bad data from getting to the icecast server.
</p>
-Des:
##----------------------------------------
=Pkg: libsidplay1 1.36.59 82.22 x86_64
=Sum: A Library for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you to create packages able to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at:
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2 2.2.2 40.22 x86_64
=Sum: "Typesafe Signal Framework" pro C++
+Des:
<!-- DT:Rich -->
<p>Tato knihovna implemtuje úplný callback systém pro používání widget knihoven,
abstraktních rozhraní a základního prgoramování. Je to jedna z nejkompletnějších
knihoven s možností spojení abstraktního callbacku k třídě metody, funkci nebo objektu.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2-32bit 2.2.2 40.22 x86_64
=Sum: "Typesafe Signal Framework" pro C++
+Des:
<!-- DT:Rich -->
<p>Tato knihovna implemtuje úplný callback systém pro používání widget knihoven,
abstraktních rozhraní a základního prgoramování. Je to jedna z nejkompletnějších
knihoven s možností spojení abstraktního callbacku k třídě metody, funkci nebo objektu.
</p>
-Des:
##----------------------------------------
=Pkg: libslab-lang 2.27.91 6.15.2 x86_64
=Sum: Library to create tile-based UI for GNOME
+Des:
<!-- DT:Rich -->
<p>This library makes it easy to create tile-based UI for GNOME, as seen in
gnome-main-menu.
</p>
-Des:
##----------------------------------------
=Pkg: libslab0 2.27.91 6.15.2 x86_64
=Sum: Library to create tile-based UI for GNOME
+Des:
<!-- DT:Rich -->
<p>This library makes it easy to create tile-based UI for GNOME, as seen in
gnome-main-menu.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbclient0 3.6.3 0.18.3 x86_64
=Sum: Knihovna Samba - klientská část
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libsmbclient.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbclient0-32bit 3.6.3 0.18.3 x86_64
=Sum: Knihovna Samba - klientská část
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje knihovnu libsmbclient.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios-bin 2.0.2 11.8.4 x86_64
=Sum: The "supported" sample binaries that use libsmbios
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p><p>
This package contains some sample binaries that use libsmbios.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios2 2.0.2 11.8.4 x86_64
=Sum: Libsmbios shared libraries
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios2-32bit 2.0.2 11.8.4 x86_64
=Sum: Libsmbios shared libraries
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p>
-Des:
##----------------------------------------
=Pkg: libsnapper1 0.0.7 0.21.40 x86_64
=Sum: Header files and documentation for libsnapper
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation for developing with
libsnapper.
</p>
-Des:
##----------------------------------------
=Pkg: libsndfile 1.0.20 2.4.1 x86_64
=Sum: Knihovna pro práci se zvukovými formáty
+Des:
<!-- DT:Rich -->
<p>Libsndfile is a C library for reading and writing sound files, such as
AIFF, AU, and WAV files, through one standard interface.  It can currently
read and write 8, 16, 24, and 32-bit PCM files as well as 32-bit floating point
WAV files and a number of compressed formats.
</p>
-Des:
##----------------------------------------
=Pkg: libsndfile-32bit 1.0.20 2.4.1 x86_64
=Sum: Knihovna pro práci se zvukovými formáty
+Des:
<!-- DT:Rich -->
<p>Libsndfile is a C library for reading and writing sound files, such as
AIFF, AU, and WAV files, through one standard interface.  It can currently
read and write 8, 16, 24, and 32-bit PCM files as well as 32-bit floating point
WAV files and a number of compressed formats.
</p>
-Des:
##----------------------------------------
=Pkg: libsnmp15-32bit 5.4.2.1 8.12.6.1 x86_64
=Sum: Shared Libraries from net-snmp
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p><p>
</p><p>
This package holds the shared libraries from the net-snmp package.
</p>
-Des:
##----------------------------------------
=Pkg: libsnmp15 5.4.2.1 8.12.6.1 x86_64
=Sum: Shared Libraries from net-snmp
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p><p>
</p><p>
This package holds the shared libraries from the net-snmp package.
</p>
-Des:
##----------------------------------------
=Pkg: libsoprano4 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is an open and pluggable RDF resource framework which is build on top of QT4. It provides RDF storage, RDF parsing, serialization, inference, and full text indexing in a nice C++ API.
The main target of Soprano are desktop applications as it is being developed as a subroject of Nepomuk, the semantic desktop initiative.
</p>
-Des:
##----------------------------------------
=Pkg: libsoprano4-32bit 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is an open and pluggable RDF resource framework which is build on top of QT4. It provides RDF storage, RDF parsing, serialization, inference, and full text indexing in a nice C++ API.
The main target of Soprano are desktop applications as it is being developed as a subroject of Nepomuk, the semantic desktop initiative.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup-2_4-1 2.32.2 4.7.1 x86_64
=Sum: Simple Object Access Protocol (SOAP)
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C.
</p><p>
It provides a queued asynchronous callback-based mechanism for sending and
servicing SOAP requests and a WSDL (Web Service Definition Language) to C
compiler that generates client stubs and server skeletons for easily calling
and implementing SOAP methods.
</p><p>
It uses the Glib main loop and is designed to work well with GTK+
applications.  This enables GNOME applications to access SOAP servers
on the network in a completely asynchronous fashion, very similar to the
GTK+ programming model (a synchronous operation mode is also supported
for those who want it).
</p><p>
The WSDL compiler helps you make your applications interoperate
with services that expose their descriptions through WSDL.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup-2_4-1-32bit 2.32.2 4.7.1 x86_64
=Sum: Simple Object Access Protocol (SOAP)
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C.
</p><p>
It provides a queued asynchronous callback-based mechanism for sending and
servicing SOAP requests and a WSDL (Web Service Definition Language) to C
compiler that generates client stubs and server skeletons for easily calling
and implementing SOAP methods.
</p><p>
It uses the Glib main loop and is designed to work well with GTK+
applications.  This enables GNOME applications to access SOAP servers
on the network in a completely asynchronous fashion, very similar to the
GTK+ programming model (a synchronous operation mode is also supported
for those who want it).
</p><p>
The WSDL compiler helps you make your applications interoperate
with services that expose their descriptions through WSDL.
</p>
-Des:
##----------------------------------------
=Pkg: libspectre1 0.2.1 2.24 x86_64
=Sum: Library for Rendering PostScript Documents
+Des:
<!-- DT:Rich -->
<p>libspectre is a small library for rendering Postscript documents. It provides a convenient easy to use API for handling and rendering Postscript documents.
</p>
-Des:
##----------------------------------------
=Pkg: libspeex 1.1.99.91 2.12 x86_64
=Sum: An Open Source, Patent Free Speech Codec Library
+Des:
<!-- DT:Rich -->
<p>Speex is a patent free audio codec designed especially for voice (unlike Vorbis which targets general audio) signals and providing good narrowband and wideband quality. This project aims to be complementary to the Vorbis codec.
</p>
-Des:
##----------------------------------------
=Pkg: libsqlite3-0 3.7.6.3 1.4.4.1 x86_64
=Sum: Shared libraries for the Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries for the Embeddable SQL Database Engine.
</p><p>
SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is a server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libsqlite3-0-32bit 3.7.6.3 1.4.4.1 x86_64
=Sum: Shared libraries for the Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries for the Embeddable SQL Database Engine.
</p><p>
SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is a server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libssh2 0.2 5.16.1 x86_64
=Sum: SSH library
+Des:
<!-- DT:Rich -->
<p>The ssh library was designed to be used by programmers needing a working SSH
implementation by the mean of a library. The complete control of the client is
made by the programmer. With libssh, you can remotely execute programs,
transfer files, use a secure and transparent tunnel for your remote programs.
With its Secure FTP implementation, you can play with remote files easily,
without third-party programs others than libcrypto (from openssl).
</p><p>
This package provides libssh from http://0xbadc0de.be/ that should not be
confused with libssh2 available from http://www.libssh2.org (libssh2 package)
</p>
-Des:
##----------------------------------------
=Pkg: libssh2-1 0.19.0+20080814 2.16.1 x86_64
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++33 3.3.3 11.9 x86_64
=Sum: Standardní sdílená knihovna pro C++
+Des:
<!-- DT:Rich -->
<p>Standardní C++ knihovna pro dynamicky linkované programy v C++.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++33-32bit 3.3.3 11.9 x86_64
=Sum: Standardní sdílená knihovna pro C++
+Des:
<!-- DT:Rich -->
<p>Standardní C++ knihovna pro dynamicky linkované programy v C++.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++43-devel-32bit 4.3.4_20091019 0.22.17 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje veškeré hlavičkové soubory a knihovny standardní
knihovny C++. Potřebujete ji pro kompilaci zdrojových kódů napsaných v C++.
</p><p>
Kompletní zdrojové kódy jsou v balíčku gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++43-devel 4.3.4_20091019 0.22.17 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje veškeré hlavičkové soubory a knihovny standardní
knihovny C++. Potřebujete ji pro kompilaci zdrojových kódů napsaných v C++.
</p><p>
Kompletní zdrojové kódy jsou v balíčku gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++46-32bit 4.6.1_20110701 0.13.9 x86_64
=Sum: Standardní sdílená knihovna pro C++
+Des:
<!-- DT:Rich -->
<p>Standardní C++ knihovna pro dynamicky linkované programy v C++.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++46 4.6.1_20110701 0.13.9 x86_64
=Sum: Standardní sdílená knihovna pro C++
+Des:
<!-- DT:Rich -->
<p>Standardní C++ knihovna pro dynamicky linkované programy v C++.
</p>
-Des:
##----------------------------------------
=Pkg: libstrigi0 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: libstrigi0-32bit 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: libsyncml-tools 0.4.4 29.23 x86_64
=Sum: Library providing support for the SyncML protocol
+Des:
<!-- DT:Rich -->
<p>Libsyncml is a implementation of the SyncML protocol.
It allows programs like OpenSync the synchronization of
SyncML-enabled devices, such as the SonyEricsson P800, as well as remote
OpenSync to OpenSync synchronization over the internet.
You need to install the libopensync-* packages and msynctool for that, too.
</p>
-Des:
##----------------------------------------
=Pkg: libsyncml0 0.4.4 29.23 x86_64
=Sum: Library providing support for the SyncML protocol
+Des:
<!-- DT:Rich -->
<p>Libsyncml is a implementation of the SyncML protocol.
It allows programs like OpenSync the synchronization of
SyncML-enabled devices, such as the SonyEricsson P800, as well as remote
OpenSync to OpenSync synchronization over the internet.
You need to install the libopensync-* packages and msynctool for that, too.
</p>
-Des:
##----------------------------------------
=Pkg: libtag-extras0 0.1.6 2.1.101 x86_64
=Sum: Extra plugins for TagLib
+Des:
<!-- DT:Rich -->
<p>Unofficial TagLib file type plugins maintained by the Amarok project
</p>
-Des:
##----------------------------------------
=Pkg: libtalloc2 3.6.3 0.18.3 x86_64
=Sum: Samba talloc Library
+Des:
<!-- DT:Rich -->
<p>This package includes the talloc library.
</p>
-Des:
##----------------------------------------
=Pkg: libtalloc2-32bit 3.6.3 0.18.3 x86_64
=Sum: Samba talloc Library
+Des:
<!-- DT:Rich -->
<p>This package includes the talloc library.
</p>
-Des:
##----------------------------------------
=Pkg: libtasn1 1.5 1.24.41 x86_64
=Sum: ASN.1 parsing library
+Des:
<!-- DT:Rich -->
<p>This is the ASN.1 library used in GNUTLS.
More up to date information can be found at
http://www.gnu.org/software/gnutls and http://www.gnutls.org
</p>
-Des:
##----------------------------------------
=Pkg: libtasn1-3 1.5 1.24.41 x86_64
=Sum: ASN.1 parsing library
+Des:
<!-- DT:Rich -->
<p>This is the ASN.1 library used in GNUTLS.
More up to date information can be found at
http://www.gnu.org/software/gnutls and http://www.gnutls.org
</p>
-Des:
##----------------------------------------
=Pkg: libtasn1-3-32bit 1.5 1.24.41 x86_64
=Sum: ASN.1 parsing library
+Des:
<!-- DT:Rich -->
<p>This is the ASN.1 library used in GNUTLS.
More up to date information can be found at
http://www.gnu.org/software/gnutls and http://www.gnutls.org
</p>
-Des:
##----------------------------------------
=Pkg: libtdb1 3.6.3 0.18.3 x86_64
=Sum: Samba tdb Library
+Des:
<!-- DT:Rich -->
<p>This package includes the tdb library.
</p>
-Des:
##----------------------------------------
=Pkg: libtdb1-32bit 3.6.3 0.18.3 x86_64
=Sum: Samba tdb Library
+Des:
<!-- DT:Rich -->
<p>This package includes the tdb library.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy 0.3.3 2.11.65 x86_64
=Sum: A unified framework for all forms of real time conversations
+Des:
<!-- DT:Rich -->
<p>The Telepathy project aims to provide a unified framework for all forms of real time conversations, including instant messaging, IRC, voice calls and video calls. It uses the DBus messaging system to provide a simple interface for client applications, allowing them to quickly benefit from Telepathy&#39;s functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy-farsight0 0.0.11 1.1.155 x86_64
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Telepathy Farsight is a Telepathy client that uses Farsight2 and GStreamer to handle media streaming channels. It&#39;s used as a background process by other Telepathy clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy-glib0 0.8.0 1.1.67 x86_64
=Sum: Libraries for adding telepathy support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
telepathy functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: libtevent0 3.6.3 0.18.3 x86_64
=Sum: Samba tevent Library
+Des:
<!-- DT:Rich -->
<p>This package includes the tevent library.
</p>
-Des:
##----------------------------------------
=Pkg: libtevent0-32bit 3.6.3 0.18.3 x86_64
=Sum: Samba tevent Library
+Des:
<!-- DT:Rich -->
<p>This package includes the tevent library.
</p>
-Des:
##----------------------------------------
=Pkg: libtheora0 1.1.1 15.5.32 x86_64
=Sum: Volně dostupný video kodek
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtheora0-32bit 1.1.1 15.5.32 x86_64
=Sum: Volně dostupný video kodek
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtidy 1.0 34.7 x86_64
=Sum: A library to clean up and pretty-print HTML/XHTML/XML
+Des:
<!-- DT:Rich -->
<p>When editing HTML it&#39;s easy to make mistakes. Wouldn&#39;t it be nice if
there was a simple way to fix these mistakes automatically and tidy up
sloppy editing into nicely layed out markup? Well now there is! Dave
Raggett&#39;s HTML TIDY is a free utility for doing just that. It also works
great on the atrociously hard to read markup generated by specialized
HTML editors and conversion tools, and can help you identify where you
need to pay further attention on making your pages more accessible to
people with disabilities.
</p><p>
</p><p>
Tidy is able to fix up a wide range of problems and to bring to your
attention things that you need to work on yourself. Each item found is
listed with the line number and column so that you can see where the
problem lies in your markup. Tidy won&#39;t generate a cleaned up version
when there are problems that it can&#39;t be sure of how to handle. These
are logged as &quot;errors&quot; rather than &quot;warnings&quot;.
</p><p>
</p><p>
There is a standalone binary /usr/bin/tidy built on this library,
contained in the package &quot;tidy&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libtiff3 3.8.2 141.142.1 x86_64
=Sum: Knihovna pro grafický formát TIFF(s podporou JPEG a komprimace)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje knihovny TIFF. Pro linkování programů s knihovnou libtiff musíte použít
parametry -ljpeg a -lz.
</p>
-Des:
##----------------------------------------
=Pkg: libtiff3-32bit 3.8.2 141.142.1 x86_64
=Sum: Knihovna pro grafický formát TIFF(s podporou JPEG a komprimace)
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje knihovny TIFF. Pro linkování programů s knihovnou libtiff musíte použít
parametry -ljpeg a -lz.
</p>
-Des:
##----------------------------------------
=Pkg: libtimidity-0_1-0 0.1.0 6.5.17 x86_64
=Sum: MIDI to WAVE converter library
+Des:
<!-- DT:Rich -->
<p>This library is based on the TiMidity decoder from SDL_sound library.
Purpose to create this library is to avoid unnecessary dependences.
SDL_sound requires SDL and some other libraries, that not needed to
process MIDI files. In addition libtimidity provides more suitable
API to work with MIDI songs, it enables to specify full path to the
timidity configuration file, and have function to retrieve meta data
from MIDI song.
</p>
-Des:
##----------------------------------------
=Pkg: libtimidity-0_1-0-32bit 0.1.0 6.5.17 x86_64
=Sum: MIDI to WAVE converter library
+Des:
<!-- DT:Rich -->
<p>This library is based on the TiMidity decoder from SDL_sound library.
Purpose to create this library is to avoid unnecessary dependences.
SDL_sound requires SDL and some other libraries, that not needed to
process MIDI files. In addition libtimidity provides more suitable
API to work with MIDI songs, it enables to specify full path to the
timidity configuration file, and have function to retrieve meta data
from MIDI song.
</p>
-Des:
##----------------------------------------
=Pkg: libtirpc1 0.2.1 1.5.1 x86_64
=Sum: Transport Independent RPC Library
+Des:
<!-- DT:Rich -->
<p>The Transport Independent RPC library (TI-RPC) is a replacement for
the standard SunRPC library in glibc which does not support IPv6
addresses. This implementation allows the support of other transports
than UDP and TCP over IPv4
</p>
-Des:
##----------------------------------------
=Pkg: libtomoe-gtk0 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: libtspi1 0.3.7 3.7.1 x86_64
=Sum: TSS (TCG Software Stack) access daemon for a TPM chip
+Des:
<!-- DT:Rich -->
<p>The trousers package provides a TSS implementation through the help of a user-space daemon, the tcsd, and a library  Trousers aims to be compliant to the 1.1b and 1.2 TSS specifications as available from the Trusted Computing website http://www.trustedcomputinggroup.org/.
</p><p>
The package needs the /dev/tpm device file to be present on your system. It is a character device file major 10 minor 224, 0600 tss:tss.
</p>
-Des:
##----------------------------------------
=Pkg: libtspi1-32bit 0.3.7 3.7.1 x86_64
=Sum: TSS (TCG Software Stack) access daemon for a TPM chip
+Des:
<!-- DT:Rich -->
<p>The trousers package provides a TSS implementation through the help of a user-space daemon, the tcsd, and a library  Trousers aims to be compliant to the 1.1b and 1.2 TSS specifications as available from the Trusted Computing website http://www.trustedcomputinggroup.org/.
</p><p>
The package needs the /dev/tpm device file to be present on your system. It is a character device file major 10 minor 224, 0600 tss:tss.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp 0.5.3 126.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable Audio CD, MP3, and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp5 0.5.3 126.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable Audio CD, MP3, and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libudev0 147 0.47.2 x86_64
=Sum: Pravidla používající správce událostí jádra a uzlů zařízení
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: libudev0-32bit 147 0.47.2 x86_64
=Sum: Pravidla používající správce událostí jádra a uzlů zařízení
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: libunique-1_0-0 1.1.2 1.1.279 x86_64
=Sum: A library for writing single instance application
+Des:
<!-- DT:Rich -->
<p>Unique is a library for writing single instance application. If you launch a single instance application twice, the second instance will either just quit or will send a message to the running instance.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-0_1-4 0.1.12 139.1.1 x86_64
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-0_1-4-32bit 0.1.12 139.1.1 x86_64
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0-0 1.0.8 8.4.2.1 x86_64
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0-0-32bit 1.0.8 8.4.2.1 x86_64
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libusbmuxd1 1.0.7 5.8.3 x86_64
=Sum: A library to abstract socket/protocol communication to the usbmuxd daemon
+Des:
<!-- DT:Rich -->
<p>This package contains the libusbmuxd library which provides an interface to
talk to the usbmux daemon, create connections and list attached devices.
</p>
-Des:
##----------------------------------------
=Pkg: libuuid-devel 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: libuuid1 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: libuuid1-32bit 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: libv4l 0.6.4 0.3.23 x86_64
=Sum: collection of video4linux support libraries
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4l1-0 0.6.4 0.3.23 x86_64
=Sum: The libv4l1-0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4l1-0-32bit 0.6.4 0.3.23 x86_64
=Sum: The libv4l1-0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4l2-0 0.6.4 0.3.23 x86_64
=Sum: The libv4l2-0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4l2-0-32bit 0.6.4 0.3.23 x86_64
=Sum: The libv4l2-0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4lconvert0 0.6.4 0.3.23 x86_64
=Sum: The libv4lconvert0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libv4lconvert0-32bit 0.6.4 0.3.23 x86_64
=Sum: The libv4lconvert0 shared lib
+Des:
<!-- DT:Rich -->
<p>libv4l is a collection of libraries which adds a thin abstraction layer on
top of video4linux2 devices. The purpose of this (thin) layer is to make it
easy for application writers to support a wide variety of devices without
having to write separate code for different devices in the same class. libv4l
consists of 3 different libraries: libv4lconvert, libv4l1 and libv4l2.
</p><p>
libv4lconvert offers functions to convert from any (known) pixelformat
to V4l2_PIX_FMT_BGR24 or V4l2_PIX_FMT_YUV420.
</p><p>
libv4l1 offers the (deprecated) v4l1 API on top of v4l2 devices, independent
of the drivers for those devices supporting v4l1 compatibility (which many
v4l2 drivers do not).
</p><p>
libv4l2 offers the v4l2 API on top of v4l2 devices, while adding for the
application transparent libv4lconvert conversion where necessary.
</p>
-Des:
##----------------------------------------
=Pkg: libvdpau1 0.4.1 16.16.26 x86_64
=Sum: VDPAU wrapper and trace libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the libvdpau wrapper library and the libvdpau_trace
debugging library, along with the header files needed to build VDPAU
applications.  To actually use a VDPAU device, you need a vendor-specific
implementation library.  Currently, this is always libvdpau_nvidia.  You can
override the driver name by setting the VDPAU_DRIVER environment variable.
</p>
-Des:
##----------------------------------------
=Pkg: libvdpau1-32bit 0.4.1 16.16.26 x86_64
=Sum: VDPAU wrapper and trace libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the libvdpau wrapper library and the libvdpau_trace
debugging library, along with the header files needed to build VDPAU
applications.  To actually use a VDPAU device, you need a vendor-specific
implementation library.  Currently, this is always libvdpau_nvidia.  You can
override the driver name by setting the VDPAU_DRIVER environment variable.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt 0.9.6 0.13.42 x86_64
=Sum: A C toolkit to interract with the virtualization capabilities of Linux
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization capabilities Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API initially for the Xen paravirtualization but should be able to integrate other virtualization mechanisms if needed.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-cim 0.5.12 0.7.16 x86_64
=Sum: CMPI-based CIM provider implementing DMTF SVPC model
+Des:
<!-- DT:Rich -->
<p>Libvirt-cim is a CMPI CIM provider that implements the DMTF SVPC virtualization model. The goal is to support most of the features exported by libvirt itself, enabling management of multiple platforms with a single provider.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-client 0.9.6 0.13.42 x86_64
=Sum: Client side library and utilities of the libvirt library
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization
capabilities of Linux.  The libvirt-client package contains shared
libraries and client binaries needed to access the virtualization
capabilities of recent versions of Linux (and other OSes).
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-client-32bit 0.9.6 0.13.42 x86_64
=Sum: Client side library and utilities of the libvirt library
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization
capabilities of Linux.  The libvirt-client package contains shared
libraries and client binaries needed to access the virtualization
capabilities of recent versions of Linux (and other OSes).
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-doc 0.9.6 0.13.42 x86_64
=Sum: A C toolkit to interract with the virtualization capabilities of Linux
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization capabilities Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API initially for the Xen paravirtualization but should be able to integrate other virtualization mechanisms if needed.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-python 0.9.6 0.13.42 x86_64
=Sum: A C toolkit to interract with the virtualization capabilities of Linux
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization capabilities Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API initially for the Xen paravirtualization but should be able to integrate other virtualization mechanisms if needed.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual 0.4.0 175.12 x86_64
=Sum: Sound Visualization Library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that need audio visualization and audio visualization
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual-32bit 0.4.0 175.12 x86_64
=Sum: Sound Visualization Library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that need audio visualization and audio visualization
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual-plugins 0.4.0 91.26 x86_64
=Sum: Moduly knihovny zvukové vizualizace
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that need audio visualization and audio visualization
plug-ins. This package contains various plug-ins like:
<ul>
<li>bumpscope
</li><li>dna
</li><li>infinite
</li><li>jakdaw
</li><li>lv_analyzer
</li><li>lv_gltest
</li><li>lv_scope
</li><li>madspin
</li><li>oinksie
</li><li>plazma
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libvoikko1 2.0 2.26 x86_64
=Sum: Spellchecker and Hyphenator for Finnish Language
+Des:
<!-- DT:Rich -->
<p>Voikko is a Finnish spellchecker and hyphenator based on Malaga and Suomi-Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis 1.2.0 79.13.1 x86_64
=Sum: Kodek pro kompresi ve formátu Vorbis General Audio
+Des:
<!-- DT:Rich -->
<p>Vorbis is a fully open, nonproprietary, patent-and-royalty-free,
and general-purpose compressed audio format for audio and music at fixed
and variable bit rates from 16 to 128 kbps/channel.
</p><p>
The native bitstream format of Vorbis is <a href="pkg://libogg"> Ogg</a>.
Alternatively, <a href="pkg://libmatroska"> matroska</a> can also be used.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis-32bit 1.2.0 79.13.1 x86_64
=Sum: Kodek pro kompresi ve formátu Vorbis General Audio
+Des:
<!-- DT:Rich -->
<p>Vorbis is a fully open, nonproprietary, patent-and-royalty-free,
and general-purpose compressed audio format for audio and music at fixed
and variable bit rates from 16 to 128 kbps/channel.
</p><p>
The native bitstream format of Vorbis is <a href="pkg://libogg"> Ogg</a>.
Alternatively, <a href="pkg://libmatroska"> matroska</a> can also be used.
</p>
-Des:
##----------------------------------------
=Pkg: libvpx0 0.9.7 3.5.17 x86_64
=Sum: VP8 codec library
+Des:
<!-- DT:Rich -->
<p>WebM is an open, royalty-free, media file format designed for the web.
</p><p>
WebM defines the file container structure, video and audio formats.
WebM files consist of video streams compressed with the VP8 video codec
and audio streams compressed with the Vorbis audio codec.
The WebM file structure is based on the Matroska container.
</p>
-Des:
##----------------------------------------
=Pkg: libwavpack1 4.50.1 1.22 x86_64
=Sum: Free Hybrid Lossless Audio Compression Format
+Des:
<!-- DT:Rich -->
<p>WavPack is a completely open audio compression format providing lossless,
high-quality lossy, and a unique hybrid compression mode. Although the
technology is loosely based on previous versions of WavPack, the new
version 4 format has been designed from the ground up to offer unparalleled
performance and functionality.
</p><p>
In the default lossless mode WavPack acts just like a WinZip compressor for
audio files. However, unlike MP3 or WMA encoding which can affect the sound
quality, not a single bit of the original information is lost, so there&#39;s no
chance of degradation. This makes lossless mode ideal for archiving audio
material or any other situation where quality is paramount. The compression
ratio depends on the source material, but generally is between 30% and 70%.
</p><p>
The hybrid mode provides all the advantages of lossless compression with an
additional bonus. Instead of creating a single file, this mode creates both a
relatively small, high-quality lossy file that can be used all by itself, and a
&quot;correction&quot; file that (when combined with the lossy file) provides full
lossless restoration. For some users this means never having to choose between
lossless and lossy compression!
</p>
-Des:
##----------------------------------------
=Pkg: libwbclient0 3.6.3 0.18.3 x86_64
=Sum: Samba libwbclient Library
+Des:
<!-- DT:Rich -->
<p>This package includes the wbclient library.
</p>
-Des:
##----------------------------------------
=Pkg: libwbclient0-32bit 3.6.3 0.18.3 x86_64
=Sum: Samba libwbclient Library
+Des:
<!-- DT:Rich -->
<p>This package includes the wbclient library.
</p>
-Des:
##----------------------------------------
=Pkg: libwbxml2-0 0.9.2_SVN59 11.18 x86_64
=Sum: WBXML parser and compiler library
+Des:
<!-- DT:Rich -->
<p>wbxml2 je knihovna obsahující WBXML parser a WBXML kompilátor.
Nezávisí však na libxml2, ale na expat, což ji dělá rychlejší a přenositelnější.
WBXML knihovna obsahuje knihovnu a s ní spojené nástroje pro kontrolu,
dekódování a práci s WBXML dokumenty. WBXML (Wireless Binary XML)
formát je binární reprezentací XML definovanou Wap fórem.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-1_0-1 1.0.1 0.1.141 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-1_0-2 1.2.7 0.13.1 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-lang 1.2.7 0.13.1 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf 0.2.8.4 206.27.4 x86_64
=Sum: Library and Utilities for Displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>Tato knihovna interpretuje metadata obrázků a umí je zobrazit v X Window nebo je
převést na standardní PNG, JPEG, PS, EPS a další.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck-1-22 2.28.0 2.2.263 x86_64
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>Window Navigator Construction Kit je knihovna, kterou je možné využít pro psaní
tasklistů, pagerů a podobných aplikací pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck-1-22-32bit 2.28.0 2.2.263 x86_64
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>Window Navigator Construction Kit je knihovna, kterou je možné využít pro psaní
tasklistů, pagerů a podobných aplikací pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck 2.28.0 2.2.263 x86_64
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>Window Navigator Construction Kit je knihovna, kterou je možné využít pro psaní
tasklistů, pagerů a podobných aplikací pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck-lang 2.28.0 2.2.263 x86_64
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>Window Navigator Construction Kit je knihovna, kterou je možné využít pro psaní
tasklistů, pagerů a podobných aplikací pro GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-0_8-8 0.8.14 4.33 x86_64
=Sum: Library for Importing WordPerfect (tm) Documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading or interpreting data from WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (for example, a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg-0_1-1 0.1.3 3.33 x86_64
=Sum: Library to read and parse graphics in WordPerfect Graphics format
+Des:
<!-- DT:Rich -->
<p>libwpg is a C++ library to read and parse graphics in WPG (WordPerfect Graphics) format. It is cross-platform, at the moment it can be build on Microsoft Windows and Linux.
</p>
-Des:
##----------------------------------------
=Pkg: libwps-0_1-1 0.1.2 5.33 x86_64
=Sum: Library for importing the Microsoft Works word processor file format
+Des:
<!-- DT:Rich -->
<p>libwps is a library (for use by word procesors, for example) for importing the Microsoft Works word processor file format.
</p>
-Des:
##----------------------------------------
=Pkg: libwsman1 2.2.3 0.6.5 x86_64
=Sum: Opensource Implementation of WS-Management
+Des:
<!-- DT:Rich -->
<p>Opensource Implementation of WS-Management
</p>
-Des:
##----------------------------------------
=Pkg: libx86 1.1 13.17 x86_64
=Sum: x86 real-mode library
+Des:
<!-- DT:Rich -->
<p>A library to provide support for making real-mode calls x86 calls. On x86
hardware, vm86 mode is used. On other platforms, x86 emulation is provided.
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt 3.0.3 0.6.1 x86_64
=Sum: Crypt Library for DES, MD5, Blowfish and others
+Des:
<!-- DT:Rich -->
<p>Libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, SHA256, SHA512 and passwords with
blowfish encryption.
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt-32bit 3.0.3 0.6.1 x86_64
=Sum: Crypt Library for DES, MD5, Blowfish and others
+Des:
<!-- DT:Rich -->
<p>Libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, SHA256, SHA512 and passwords with
blowfish encryption.
</p>
-Des:
##----------------------------------------
=Pkg: libxine1 1.1.15 23.3.9 x86_64
=Sum: Video přehrávač s moduly
+Des:
<!-- DT:Rich -->
<p>xine is a free multimedia player. It plays back CDs, DVDs, and VCDs. It also decodes multimedia files like AVI, MOV, WMV, and MP3 from local disk drives, and displays multimedia streamed over the Internet. It interprets many of the most common multimedia formats available - and some of the most uncommon formats, too.
</p><p>
The libxine1 package may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/xine#Legal_Matters
</p>
-Des:
##----------------------------------------
=Pkg: libxine1-gnome-vfs 1.1.15 23.3.9 x86_64
=Sum: gnome-vfs plugin for xine
+Des:
<!-- DT:Rich -->
<p>gnome-vfs xine input plugin
</p>
-Des:
##----------------------------------------
=Pkg: libxine1-pulse 1.1.15 23.3.9 x86_64
=Sum: pulseaudio plugin for xine
+Des:
<!-- DT:Rich -->
<p>xine sound output plugin for the pulseaudio soundserver
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier15 4.0 1.1.73 x86_64
=Sum: Library with X keyboard related functions
+Des:
<!-- DT:Rich -->
<p>Tato knihovna zjednodušuje vývoj XKB aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: libxml++ 2.26.1 1.6.1 x86_64
=Sum: C++ Interface for XML Files
+Des:
<!-- DT:Rich -->
<p>libXML++ nabízí C++ rozhraní pro XML soubory. V současnosti je používán
pro přístup ke XML souborům libxml2.
</p>
-Des:
##----------------------------------------
=Pkg: libxml++-32bit 2.26.1 1.6.1 x86_64
=Sum: C++ Interface for XML Files
+Des:
<!-- DT:Rich -->
<p>libXML++ nabízí C++ rozhraní pro XML soubory. V současnosti je používán
pro přístup ke XML souborům libxml2.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2 2.7.6 0.13.1 x86_64
=Sum: Knihovna pro manipulaci s XML soubory
+Des:
<!-- DT:Rich -->
<p>XML knihovna v jazyce C byla původně vyvíjena pro projekt GNOME, v současnosti je
používána stále více programy pro načítání a ukládání datových
struktur a pro manipulaci s XML soubory.
</p><p>
Tato knihovna implementuje velký počet standardů spojených se
značkovacími jazyky, např. XML, XML Base, RFC 2396, XPath, XPointer,
HTML4, XInclude, SGML Catalogs, a XML Catalogs. Ve většině případů
se libxml snaží implementovat tyto standardy striktním způsobem; do
jisté míry podporuje i tyto specifikace: DOM, FTP klient, HTTP klient,
SAX, a DocBook SGML.
</p><p>
Podporuje také RelaxNG. Schémata pro W3C XML jsou ve vývoji.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2-32bit 2.7.6 0.13.1 x86_64
=Sum: Knihovna pro manipulaci s XML soubory
+Des:
<!-- DT:Rich -->
<p>XML knihovna v jazyce C byla původně vyvíjena pro projekt GNOME, v současnosti je
používána stále více programy pro načítání a ukládání datových
struktur a pro manipulaci s XML soubory.
</p><p>
Tato knihovna implementuje velký počet standardů spojených se
značkovacími jazyky, např. XML, XML Base, RFC 2396, XPath, XPointer,
HTML4, XInclude, SGML Catalogs, a XML Catalogs. Ve většině případů
se libxml snaží implementovat tyto standardy striktním způsobem; do
jisté míry podporuje i tyto specifikace: DOM, FTP klient, HTTP klient,
SAX, a DocBook SGML.
</p><p>
Podporuje také RelaxNG. Schémata pro W3C XML jsou ve vývoji.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2-python 2.7.6 0.1.36 x86_64
=Sum: Python Bindings for libxml2
+Des:
<!-- DT:Rich -->
<p>The libxml2-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by the libxml2 library to manipulate XML files.
</p><p>
This library allows manipulation of XML files. It includes support
for reading, modifying, and writing XML and HTML files. There is DTD support
that includes parsing and validation even with complex DTDs, either
at parse time or later once the document has been modified.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt 1.1.24 19.15 x86_64
=Sum: Transformační XLS knihovna
+Des:
<!-- DT:Rich -->
<p>This C library allows you to transform XML files into other XML files
(or HTML, text, and more) using the standard XSLT stylesheet transformation
mechanism.
</p><p>
It is based on libxml (version 2) for XML parsing, tree manipulation, and
XPath support. It is written in plain C, making as few assumptions as
possible and sticks closely to ANSI C/POSIX for easy embedding. Although not primarily designed
with performance in mind, libxslt seems to be a relatively fast
processor. It also includes full support for the EXSLT set of extension
functions as well as some common extensions present in other XSLT engines.
</p><p>
The package comes with xsltproc, a command line interface to the XSLT engine.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt-32bit 1.1.24 19.15 x86_64
=Sum: Transformační XLS knihovna
+Des:
<!-- DT:Rich -->
<p>This C library allows you to transform XML files into other XML files
(or HTML, text, and more) using the standard XSLT stylesheet transformation
mechanism.
</p><p>
It is based on libxml (version 2) for XML parsing, tree manipulation, and
XPath support. It is written in plain C, making as few assumptions as
possible and sticks closely to ANSI C/POSIX for easy embedding. Although not primarily designed
with performance in mind, libxslt seems to be a relatively fast
processor. It also includes full support for the EXSLT set of extension
functions as well as some common extensions present in other XSLT engines.
</p><p>
The package comes with xsltproc, a command line interface to the XSLT engine.
</p>
-Des:
##----------------------------------------
=Pkg: libyajl1 1.0.11 6.5.103 x86_64
=Sum: Yet Another JSON Library
+Des:
<!-- DT:Rich -->
<p>YAJL is a small event-driven (SAX-style) JSON parser written in ANSI C, and a
small validating JSON generator.
</p>
-Des:
##----------------------------------------
=Pkg: libyajl1-32bit 1.0.11 6.5.103 x86_64
=Sum: Yet Another JSON Library
+Des:
<!-- DT:Rich -->
<p>YAJL is a small event-driven (SAX-style) JSON parser written in ANSI C, and a
small validating JSON generator.
</p>
-Des:
##----------------------------------------
=Pkg: libzio 0.9 5.77 x86_64
=Sum: A Library for Accessing Compressed Text Files
+Des:
<!-- DT:Rich -->
<p>Libzio provides a wrapper function for reading or writing gzip or bzip2
files with FILE streams.
</p>
-Des:
##----------------------------------------
=Pkg: libzip1 0.9 1.24.1 x86_64
=Sum: C library for reading, creating, and modifying zip archives
+Des:
<!-- DT:Rich -->
<p>libzip is a C library for reading, creating, and modifying zip archives. Files can be added from data buffers, files, or compressed data copied directly from other zip archives. Changes made without closing the archive can be reverted. The API is documented by man pages.
</p>
-Des:
##----------------------------------------
=Pkg: libzvbi0 0.2.33 1.17 x86_64
=Sum: Dekódovací knihovna VBI
+Des:
<!-- DT:Rich -->
<p>VBI znamená Vertical Blanking Interval a jedná se o dekodér obrazového
signálu. Gap je používán pro přenos AM modulovaných dat pro různé datové
služby, jako je Teletext apod.
</p><p>
zvbi poskytuje procedury pro čtení z vzorkovacích zařízení VBI,
demodulaci a interpretaci dat mnoha populárních služeb.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp 9.11.7 0.5.16 x86_64
=Sum: Package, Patch, Pattern, and Product Management
##----------------------------------------
=Pkg: liferea 1.4.22d 1.44.2 x86_64
=Sum: Linux Feed Reader
+Des:
<!-- DT:Rich -->
<p></p><p>
Liferea is an abbreviation for Linux Feed Reader. It is a news
aggregator for online news feeds. It supports a number of different
feed formats including RSS/RDF, CDF, Atom, OCS, and OPML. There are
many other news readers available, but these others are not available
for Linux or require many extra libraries to be installed. Liferea
tries to fill this gap by creating a fast, easy-to-use, easy-to-install
news aggregator for GTK and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: liferea-lang 1.4.22d 1.44.2 x86_64
=Sum: Linux Feed Reader
+Des:
<!-- DT:Rich -->
<p></p><p>
Liferea is an abbreviation for Linux Feed Reader. It is a news
aggregator for online news feeds. It supports a number of different
feed formats including RSS/RDF, CDF, Atom, OCS, and OPML. There are
many other news readers available, but these others are not available
for Linux or require many extra libraries to be installed. Liferea
tries to fill this gap by creating a fast, easy-to-use, easy-to-install
news aggregator for GTK and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: lilo 22.8 42.47.5 x86_64
=Sum: Zavaděč systému, startovací nabídka
+Del:
<!-- DT:Rich -->
<p>Tento balíček je požadován pro správnou funkci a správu vašeho
systému Linux!
</p><p>
Nemažte jej, pokud nevíte přesně, co děláte.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>LILO startuje operační systém Linux z pevného disku.
Může také zavádět jiné operační systémy jako je MS-DOS a OS/2, DOS
může dokonce zavádět z druhého pevného disku.
Konfigurační soubor pro LILO je /etc/lilo.conf
</p><p>
Variantu pro PowerPC lze použít i na nových počítačích PowerMac a CHRP.
</p><p>
Verze ix86 obsahuje Memtest86, který můžete po zavedení LILO použít k
otestování paměti Vašeho počítače.
</p>
-Des:
##----------------------------------------
=Pkg: limal 1.5.3 0.2.11 x86_64
=Sum: LiMaL -- Základní knihovna
+Des:
<!-- DT:Rich -->
<p>LiMaL is an C++ framework enhancement for BloCXX. This package contains the LiMaL core library which include some basic functionality like logging and file handling.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-notifications 1.0.0 151.24 x86_64
=Sum: Limal pluglib for AppArmor notifications configuration files
+Des:
<!-- DT:Rich -->
<p>Limal pluglib for AppArmor that provides an API for working with AppArmor&#39;s notification configuration file, notify.cfg.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-notifications-perl 1.0.0 151.24 x86_64
=Sum: Perl bindings for the apparmor-notifications limal pluglib.
+Des:
<!-- DT:Rich -->
<p>Perl bindings for the apparmor-notifications limal pluglib.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm 1.5.22 0.2.15 x86_64
=Sum: LiMaL--CA Management Library
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
certificate authority.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm-perl 1.5.22 0.2.15 x86_64
=Sum: LiMaL - CA Management Library Perl Bindings
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
Certificate Authority.
</p><p>
This package provides the perl bindings to the CA Management Library.
</p>
-Des:
##----------------------------------------
=Pkg: limal-nfs-server 1.5.3 0.2.11 x86_64
=Sum: LiMaL--NFS Server Library
+Des:
<!-- DT:Rich -->
<p>LiMaL NFS Server Library provides methods for managing a NFS Server.
</p>
-Des:
##----------------------------------------
=Pkg: limal-nfs-server-perl 1.5.3 0.2.11 x86_64
=Sum: LiMaL--NFS Server Library Perl Bindings
+Des:
<!-- DT:Rich -->
<p>LiMaL NFS Server Library provides methods for managing a NFS Server.
</p><p>
This package provides the perl bindings to the NFS Server Library.
</p>
-Des:
##----------------------------------------
=Pkg: limal-perl 1.5.3 0.2.11 x86_64
=Sum: LiMaL - Core Library Perl Bindings
+Des:
<!-- DT:Rich -->
<p>LiMaL - Core Library Perl Bindings
</p>
-Des:
##----------------------------------------
=Pkg: linux-atm-lib 2.5.0 135.22 x86_64
=Sum: Knihovny pro ATM
+Des:
<!-- DT:Rich -->
<p>Knihovny pro podporu ATM (Asynchronous Transfer Mode)
</p>
-Des:
##----------------------------------------
=Pkg: lirc 0.8.4 2.16 x86_64
=Sum: Nástroje pro IrDA komunikaci
+Des:
<!-- DT:Rich -->
<p>LIRC je balíček, který podporuje příjem a vysílání infračervených
signálů z většiny obvyklých IR dálkových ovládání. Obsahuje démon,
který dekóduje a odešle IR signály, myší démon, který vysílá IR
signály při pohybech s myší a pár uživatelských programů, které
umožňují řídit počítač pomocí dálkového ovládání.
</p>
-Des:
##----------------------------------------
=Pkg: lirc-32bit 0.8.4 2.16 x86_64
=Sum: Nástroje pro IrDA komunikaci
+Des:
<!-- DT:Rich -->
<p>LIRC je balíček, který podporuje příjem a vysílání infračervených
signálů z většiny obvyklých IR dálkových ovládání. Obsahuje démon,
který dekóduje a odešle IR signály, myší démon, který vysílá IR
signály při pohybech s myší a pár uživatelských programů, které
umožňují řídit počítač pomocí dálkového ovládání.
</p>
-Des:
##----------------------------------------
=Pkg: login 3.41 0.2.13 x86_64
=Sum: Login Program
+Des:
<!-- DT:Rich -->
<p>Unix login program that uses pam for authentication.
</p>
-Des:
##----------------------------------------
=Pkg: logrotate 3.7.7 10.24.1 x86_64
=Sum: Rotování, komprese, odstranění a odesílání systémových logů
+Des:
<!-- DT:Rich -->
<p>The logrotate utility is designed to simplify the administration of
log files on a system that generates a lot of log files. Logrotate
allows the automatic rotation, compression, removal, and mailing of
log files. Logrotate can be set to handle a log file daily, weekly,
monthly, or when the log file reaches a certain size. Normally,
logrotate runs as a daily cron job.
</p>
-Des:
##----------------------------------------
=Pkg: lsb 4.0 2.4.21 x86_64
=Sum: Základ pro Linux Standard Base
+Des:
<!-- DT:Rich -->
<p>Potřebné nástroje, odkazy a závislosti pro LSB (Linux Standard Base).
</p>
-Des:
##----------------------------------------
=Pkg: lsof 4.80 1.28.1 x86_64
=Sum: Program, který vypisuje informace o souborech, které jsou otevřeny
+Des:
<!-- DT:Rich -->
<p>Lsof vypisuje informace o otevřených souborech.
Otevřený soubor může být obyčejný soubor, adresář, blokový speciální
soubor, znakový speciální soubor, textový odkaz, knihovna, roura nebo
síťový soubor (internet nebo unixový soket nebo NFS soubor). Pomocí
parametrů lze vybrat určité soubory nebo všechny soubory na zadaném
svazku.
</p>
-Des:
##----------------------------------------
=Pkg: lsscsi 0.23 0.5.1 x86_64
=Sum: List all SCSI devices in the system
+Des:
<!-- DT:Rich -->
<p>The lsscsi command lists information about SCSI devices in Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ltrace 0.4 153.18 x86_64
=Sum: Trasovač volání služeb systému a dynamicky linkovaných knihoven
+Des:
<!-- DT:Rich -->
<p>Program ltrace spustí zadaný program se zadanými parametry; přitom
hlídá a zaznamenává, jaké služby dynamických knihoven spuštěný program
volá, a signály, které přijímá. Může také hlídat a vypisovat volání
systému prováděné programem.
</p><p>
Program, jehož činnost se sleduje, nemusí být pro používání ltrace
znovu překládán, takže ltrace lze použít i pro binární programy, pro
které nemáte po ruce zdrojové texty.
</p><p>
Program ltrace je dosud ve vývoji, takže například nemusí fungovat
trasování procesů potomků a některé věci nemusí fungovat jak by měly.
</p>
-Des:
##----------------------------------------
=Pkg: ltrace-32bit 0.4 153.18 x86_64
=Sum: Trasovač volání služeb systému a dynamicky linkovaných knihoven
+Des:
<!-- DT:Rich -->
<p>Program ltrace spustí zadaný program se zadanými parametry; přitom
hlídá a zaznamenává, jaké služby dynamických knihoven spuštěný program
volá, a signály, které přijímá. Může také hlídat a vypisovat volání
systému prováděné programem.
</p><p>
Program, jehož činnost se sleduje, nemusí být pro používání ltrace
znovu překládán, takže ltrace lze použít i pro binární programy, pro
které nemáte po ruce zdrojové texty.
</p><p>
Program ltrace je dosud ve vývoji, takže například nemusí fungovat
trasování procesů potomků a některé věci nemusí fungovat jak by měly.
</p>
-Des:
##----------------------------------------
=Pkg: lua 5.1.4 1.15 x86_64
=Sum: Small Embeddable Language with Simple Procedural Syntax
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from byte codes, and has automatic memory management, making it ideal for configuration, scripting, and rapid prototyping. Lua is implemented as a small library of C functions, written in ANSI C, and the implementation goals are simplicity, efficiency, portability, and low embedding cost.
</p>
-Des:
##----------------------------------------
=Pkg: lukemftp 1.5 725.17 x86_64
=Sum: Rozšířený FTP klient
+Des:
<!-- DT:Rich -->
<p>Lukemftp je z NetBSD převzatá zdokonalená verze ftp klienta.
</p>
-Des:
##----------------------------------------
=Pkg: lv 4.51 31.8 x86_64
=Sum: Výkonný vícejazyčný Pager. Má podobné uživatelské rozhraní jako "less"
+Des:
<!-- DT:Rich -->
<p>lv je výkonný, vícejazyčný program pro čtení souborů. lv je používán
jako v UNIXu rozšířený program &quot;less&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: lvm2 2.02.84 3.25.5 x86_64
=Sum: Nástroje pro LVM2
+Des:
<!-- DT:Rich -->
<p>Programy a manuálové stránky pro konfiguraci a práci s logickými svazky
používajícími LVM2 Logical Volume Manager.
</p>
-Des:
##----------------------------------------
=Pkg: lyx 1.6.0 1.30 x86_64
=Sum: WYSIWYG editor používající LaTeX
+Des:
<!-- DT:Rich -->
<p>LyX je uživatelské rozhraní pro LaTeX pod X11. Kombinuje snadnost použití
slovních procesorů s vysokou kvalitou sazby poskytovanou LaTeXem. Zobrazení
dokumentů se blíží WYSIWYG. Nízkoúrovňové atributy (&quot;velká kurzíva&quot;) se
obvykle nevybírají přímo, ale pomocí vysokoúrovňových formátů pro celý
odstavec. Nízkoúrovňové formátování je však také možné.
</p>
-Des:
##----------------------------------------
=Pkg: lzma 4.32.7 1.25 x86_64
=Sum: Program pro komprimaci souborů
+Des:
<!-- DT:Rich -->
<p>lzma is a very powerful program for compressing files.
<ul>
<li>Average compression ratio of LZMA is about 30% better than that of gzip, and 15% better than that of bzip2.
</li><li>Decompression speed is only little slower than that of gzip, being two to five times faster than bzip2.
</li><li>In fast mode, compresses faster than bzip2 with a comparable compression ratio.
</li><li>Achieving the best compression ratios takes four to even twelve times longer than with bzip2. However. this doesn&#39;t affect decompressing speed.
</li><li>Very similar command line interface than what gzip and bzip2 have.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: m17n-lib 1.5.1 42.29 x86_64
=Sum: Multilingual Text Processing Library for the C Language
+Des:
<!-- DT:Rich -->
<p>A multilingual text processing library for the C language.
</p>
-Des:
##----------------------------------------
=Pkg: m4 1.4.12 1.19 x86_64
=Sum: GNU m4
+Des:
<!-- DT:Rich -->
<p>GNU m4 is an implementation of the traditional Unix macro processor.
</p>
-Des:
##----------------------------------------
=Pkg: mailx 12.2 141.19 x86_64
=Sum: Implementace programu mailx se schopností pracovat s MIME
+Des:
<!-- DT:Rich -->
<p>Nail je poštovní agent odvozený z Berkley Mail 8.1. Byl vyvíjen, 
aby poskytoval funkcionalitu podle POSIX.2 příkazu mailx s podporou
MIME, POP3 a SMTP. V současných systémech je nail schopen
pracovat s UNICODE/UTF-8. Obsahuje pár vylepšení jako třeba
možnost nastavit &quot;From:&quot; adresu.
</p>
-Des:
##----------------------------------------
=Pkg: make 3.81 128.20 x86_64
=Sum: GNU make
+Del:
<!-- DT:Rich -->
<p>make is needed in a number of system services for issuing commands if configuration or data files have changed. Uninstalling this small utility may result in strange effects that are hard to track down.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>GNU příkaz make s bohatou dokumentací.
</p>
-Des:
##----------------------------------------
=Pkg: makedumpfile 1.4.0 0.13.1 x86_64
=Sum: Partial kernel dump
+Des:
<!-- DT:Rich -->
<p>makedumpfile is a dump program to shorten the size of dump file.
It copies only the necessary pages for analysis with various
dump levels, and can compress the page data.
The obtained dump file can by analyzed via gdb or crash utility.
</p>
-Des:
##----------------------------------------
=Pkg: man 2.5.2 17.16 x86_64
=Sum: Program pro zobrazování manuálových stránek
+Des:
<!-- DT:Rich -->
<p>Program pro zobrazování manuálových stránek na obrazovce a pro jejich
tisk (pomocí programu groff).
</p>
-Des:
##----------------------------------------
=Pkg: marble 4.3.5 0.2.44 x86_64
=Sum: A generic map viewer
+Des:
<!-- DT:Rich -->
<p>Marble is a viewer of map data
</p>
-Des:
##----------------------------------------
=Pkg: mc 4.6.2.pre1 121.31 x86_64
=Sum: Midnight Commander
+Des:
<!-- DT:Rich -->
<p>Midnight Commander je program pro snadnou práci se soubory a adresáři
podobný Norton Commanderu. Je možné jej ovládat z klávesnice i myší
(na konzoli musí být spuštěn server &quot;gpm&quot;), a umožňuje používat barvy
(&quot;mc -c&quot;). Mc používá databázi popisů terminálů /usr/lib/terminfo, která
se nachází v ncurses.rpm a terminfo.rpm.
</p><p>
V Midnight Commanderu je obrazovka rozdělena na čtyři části; většinu
obrazovky zabírají dva adresářové panely. Předposlední řádek je příkazový
řádek shellu; poslední řádek zobrazuje funkce kláves Fn. Zcela nahoře se
zobrazuje lišta menu. Jeden ze zobrazených adresářů je aktuální adresář
s nímž pracuje většina příkazů. Některé příkazy (např. kopírování a přesun
souborů) používají druhý adresář jako implicitní cílový adresář.
</p>
-Des:
##----------------------------------------
=Pkg: mc-lang 4.6.2.pre1 121.31 x86_64
=Sum: Midnight Commander
+Des:
<!-- DT:Rich -->
<p>Midnight Commander je program pro snadnou práci se soubory a adresáři
podobný Norton Commanderu. Je možné jej ovládat z klávesnice i myší
(na konzoli musí být spuštěn server &quot;gpm&quot;), a umožňuje používat barvy
(&quot;mc -c&quot;). Mc používá databázi popisů terminálů /usr/lib/terminfo, která
se nachází v ncurses.rpm a terminfo.rpm.
</p><p>
V Midnight Commanderu je obrazovka rozdělena na čtyři části; většinu
obrazovky zabírají dva adresářové panely. Předposlední řádek je příkazový
řádek shellu; poslední řádek zobrazuje funkce kláves Fn. Zcela nahoře se
zobrazuje lišta menu. Jeden ze zobrazených adresářů je aktuální adresář
s nímž pracuje většina příkazů. Některé příkazy (např. kopírování a přesun
souborů) používají druhý adresář jako implicitní cílový adresář.
</p>
-Des:
##----------------------------------------
=Pkg: mcelog 1.0.2011.06.08 0.9.12 x86_64
=Sum: Záznam strojových událostí
+Des:
<!-- DT:Rich -->
<p>mcelog získává kontrolní strojové události z x86-64 jádra v úlohách Cronu,
dekóduje je a zaznamenává do /var/log/mcelog.
</p><p>
Kontrolní strojová událost je chyba hardwaru zjištěná CPU.
</p><p>
Tento program by měl běžet na jakémkoliv x86-64 systému.
</p><p>
Umí také dekódovat strojové zprávy o chybách jádra.
</p>
-Des:
##----------------------------------------
=Pkg: mdadm 3.2.2 0.31.1 x86_64
=Sum: Nástroj pro konfiguraci MD
+Des:
<!-- DT:Rich -->
<p>Program mdadm umožňuje ovládání linuxových &#39;md&#39; zařízení. Je zamýšlen,
aby poskytoval veškeré funkce balíků mdtools a raidtools, ale
s rozdílným rozhraním.
</p>
-Des:
##----------------------------------------
=Pkg: meanwhile 1.0.2 2.9 x86_64
=Sum: Lotus Sametime Community Client Library
+Des:
<!-- DT:Rich -->
<p>Library to establish instant messaging connections to the Lotus Sametime IM server.
</p>
-Des:
##----------------------------------------
=Pkg: memtest86+ 4.00 1.2.21 x86_64
=Sum: Memory tester pro x86
+Des:
<!-- DT:Rich -->
<p>Memtest86 je zaváděcí obraz programu pro testování paměti počítače.
</p>
-Des:
##----------------------------------------
=Pkg: mergeant 0.67 1.37 x86_64
=Sum: Mergeant -- administrační nástroj pro databáze (vývojová verze)
+Des:
<!-- DT:Rich -->
<p>Mergeant je nástroj pro administrátory databází, který pracuje s
libgnomedb a libgda.
</p>
-Des:
##----------------------------------------
=Pkg: mergeant-lang 0.67 1.37 x86_64
=Sum: Mergeant -- administrační nástroj pro databáze (vývojová verze)
+Des:
<!-- DT:Rich -->
<p>Mergeant je nástroj pro administrátory databází, který pracuje s
libgnomedb a libgda.
</p>
-Des:
##----------------------------------------
=Pkg: metacity 2.28.1 0.14.1 x86_64
=Sum: Rychlý správce oken pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>&quot;Metacity&quot; je rychlý správce oken pro GNOME 2.0. Může být
použit jako alternativa pro Sawfish. Právě kvůli výborné integraci do
GNOME 2.x ho mnoho uživatelů preferuje.
</p>
-Des:
##----------------------------------------
=Pkg: metacity-lang 2.28.1 0.14.1 x86_64
=Sum: Rychlý správce oken pro GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>&quot;Metacity&quot; je rychlý správce oken pro GNOME 2.0. Může být
použit jako alternativa pro Sawfish. Právě kvůli výborné integraci do
GNOME 2.x ho mnoho uživatelů preferuje.
</p>
-Des:
##----------------------------------------
=Pkg: metamail 2.7.19 1244.20 x86_64
=Sum: Program pro zpracování MIME dopisů
+Des:
<!-- DT:Rich -->
<p>Metamail je program pro zpracování multimediálních poštovních zpráv
(např. zpráv produkovaných Andrew toolkitem) používaný programem elm.
</p>
-Des:
##----------------------------------------
=Pkg: mgetty 1.1.36 26.31 x86_64
=Sum: Mgetty rozlišující příchod dat (login/PPP), faxu a hlasu
+Des:
<!-- DT:Rich -->
<p>Tento balíček umožní používat váš počítač jako fax. S některými hlasovými
modemy (Zyxel, Rockwell, USR), budete moci dokonce používat počítač jako
telefonní záznamník.
</p><p>
Program mgetty automaticky rozpoznává druh příchozího volání. Dokumentaci
naleznete v /usr/share/doc/mgetty a v texinfo souborech v /usr/share/info.
</p><p>
Konfigurační soubory jsou v /etc/mgetty+sendfax.
</p>
-Des:
##----------------------------------------
=Pkg: mhash 0.9.9 26.21 x86_64
=Sum: A Library for Working with Strong Hashes (Like MD5)
+Des:
<!-- DT:Rich -->
<p>Knihovna mhash umožňuje jednoduchou práci se silnými hashovacími
funkcemi, jako MD5, SHA1, atd.
</p>
-Des:
##----------------------------------------
=Pkg: mhtml-firefox 0.5 1.45.7 x86_64
=Sum: Provides Firefox with MHTML web archive compatibility
+Des:
<!-- DT:Rich -->
<p>This package installs a system-wide Firefox extension which allows it to read MHTML web archives, such as those created by Microsoft Internet ExplorerŽ.
</p>
-Des:
##----------------------------------------
=Pkg: microcode_ctl 1.17 102.40.1 x86_64
=Sum: Aktualizace mikrokódu pro procesory Intel
+Des:
<!-- DT:Rich -->
<p>Tento program umí aktualizovat mikrokód 32 bitových CPU od Intelu. Tato vlastnost
je podporována procesory Pentium II a vyššími.
</p>
-Des:
##----------------------------------------
=Pkg: mingetty 1.0.7s 92.22 x86_64
=Sum: Minimalistický getty pro virtuální konzole
+Des:
<!-- DT:Rich -->
<p>The mingetty program is a lightweight, minimalistic getty program for
use on virtual consoles only. Mingetty is not suitable for serial
lines (you should use the mgetty program for this purpose).
</p>
-Des:
##----------------------------------------
=Pkg: minicom 2.3 27.24.4.1 x86_64
=Sum: Terminálový program
+Des:
<!-- DT:Rich -->
<p>Terminálový program podobný programu Telix(tm) z MS-DOSu. Umožňuje
připojení k jiným počítačům pomocí modemu.
</p><p>
Aby mohl uživatel používat modemové připojení programem Minicom, musí
být ve skupině uucp.
</p>
-Des:
##----------------------------------------
=Pkg: mipv6d 2.0.2.umip.0.4 8.7.1 x86_64
=Sum: MIPL - Mobile IPv6 for Linux
+Des:
<!-- DT:Rich -->
<p>MIPL Mobile IPv6 for Linux is an implementation of the Mobility Support in IP version 6 (RFC 3775).
</p><p>
This user space part works together with Mobile IPv6 enabled Linux
kernels.  See INSTALL and any other documents referred there for
installation instructions and required kernel compile options.
</p><p>
MIPL Mobile IPv6 for Linux has been developed in the GO-Core Project
at the Helsinki University of Technology.  See AUTHORS for core
development team and THANKS for complete listing of contributors.
</p>
-Des:
##----------------------------------------
=Pkg: misc-console-font 3.5.10 20.31 x86_64
=Sum: A font for terminal usage
+Des:
<!-- DT:Rich -->
<p>This package contains the Misc Console font as shipped with KDE.
</p>
-Des:
##----------------------------------------
=Pkg: mjpegtools 1.9.0rc3 1.33 x86_64
=Sum: Nástroje pro snímání a zpracování MJPEG formátu
+Des:
<!-- DT:Rich -->
<p>Pomocí mjpegtools lze zachytávat, přehrávat, zpracovávat a editovat
MJPEG AV data. Aplikace používající hardware I/O pracují s Zoran
MJPEG framegrabber (balíček zoran-driver), ale nástroje pro zpracování
pracují s libovolnými daty.
</p>
-Des:
##----------------------------------------
=Pkg: mkinitrd 2.4.2 0.49.2 x86_64
=Sum: Vytváří obraz ramdisku pro zavedení modulů
+Des:
<!-- DT:Rich -->
<p>Mkinitrd vytváří obrazy souborového systému, které se používají
jako iniciační ramdisk (initrd). Tyto obrazy se pak zavedou a lze na
ně uložit nezbytné ovladače blokových zařízení (SCSI, RAID) pro
přístup do kořenového oddílu disku.
</p><p>
Jinými slovy, lze vytvořit obecná jádra bez jakýchkoliv ovladačů, a.
ovladače zkompilovat jako moduly. Protože jádro potřebuje číst tyto
 moduly, ale ještě nemůže přistupovat na zařízení, použije se initrd.
Zavaděč (lilo, grub) zavede initrd a jádro, a moduly uložené v initrd
jsou jádru dostupné ihned po zavedení initrd. Poté již může jádro
připojit dané zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: mlterm 2.9.3.20071112 134.41 x86_64
=Sum: Vícejazyčný emulátor terminálu pro grafické prostředí
+Des:
<!-- DT:Rich -->
<p>mlterm je vícejazyčný virtuální terminál pro X11.
</p><p>
Vícejazyčná podpora:
</p><p>
Mezi podporované znakové sady patří: US_ASCII, ISO8859[1-11], ISO8859[13-16],
TCVN5712, VISCII, KOI8_R,KOI8_U, ISX0201, JISX0208, JISX0212, JISX0213, GB2312,
BK, KSC5601, UHC, NS11643-N, Big5, UCS2(4)
</p><p>
Podporované kódování: ISO-8859-[1-11],ISO-8859-
[13-16], TCVN5612, VISCII, KOI8_R, KOI8_U, EUC-JP, EUC-JISX0213, ISO-2022-JP
[1,2,3], Shift_JIS, Shift_JISX0213, EUC-KR, UHC, JOHAB, ISO-2022-KR, ISO-2022-CN,
GB2312(EUC-CN), GBK, GB18030, EUC-TW, Big5, Hz, UTF-8
</p><p>
Podporované mapy znaků: TIS620, TCVN5712, JISX0213, UNICODE
</p><p>
Dále podporuje více XIM (X Input Method) a je možné dynamicky přecházet mezi
různými XIMy.
</p><p>
Další funkce:
<ul>
<li>podpora kolečka myši
</li><li>vyhlazování písem (nutné rozšíření Xft a Xrender)
</li><li>proporcionální písma
</li><li>barevné pozadí
</li><li>obrázek na pozadí (vyžaduje Imlib)
</li><li>více pty oken
</li><li>scrollbar modul API (nestabilní).
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: mlterm-scim 2.9.3.20071112 134.41 x86_64
=Sum: SCIM plugin for mlterm
+Des:
<!-- DT:Rich -->
<p>Modul SCIM vstupních metod pro použití přímo z mltermu.
</p>
-Des:
##----------------------------------------
=Pkg: mlterm-uim 2.9.3.20071112 134.41 x86_64
=Sum: An uim plugin for mlterm
+Des:
<!-- DT:Rich -->
<p>Modul pro používání uim vstupních metod přímo v mltermu.
</p>
-Des:
##----------------------------------------
=Pkg: module-init-tools 3.11.1 1.21.1 x86_64
=Sum: Nástroje pro zavádění modulů do jádra
+Del:
<!-- DT:Rich -->
<p>Programy obsažené v tomto balíčku jsou nezbytné, pokud používáte
modulární jádro. Nemažte jej, pokud nevíte přesně, co děláte!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Utilities for loading kernel modules. Included are
&#39;insmod&#39;, &#39;lsmod&#39;, &#39;rmmod&#39;, &#39;depmod&#39;, and &#39;modprobe&#39;. The
configuration file /etc/modprobe.* can be used to pass
parameters to the modules. &#39;depmod&#39; should be used after
compiling a new kernel to generate the dependency information.
&#39;insmod&#39; does not use the dependency nor the
options file. Therefore, &#39;modprobe&#39; is normally used to
load a module.
</p>
-Des:
##----------------------------------------
=Pkg: mono-core 2.6.7 0.7.19 x86_64
=Sum: A .NET Runtime Environment
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-firebird 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to
develop an open source, Unix version of the .NET development platform.
Its objective is to enable Unix developers to build and deploy
cross-platform .NET applications. The project will implement various
technologies that have been submitted to the ECMA for standardization.
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-oracle 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-postgresql 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-sqlite 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-sybase 2.6.7 0.7.19 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-debugger 2.6.3 6.5.67 x86_64
=Sum: Mono Debugger
+Des:
<!-- DT:Rich -->
<p>A debugger is an important tool for development. The Mono Debugger (MDB) can debug both managed and unmanaged applications.  It provides a reusable library that can be used to add debugger functionality to different front-ends. The debugger package includes a console debugger named &quot;mdb&quot;, and MonoDevelop (http://www.monodevelop.com) provides a GUI interface to the debugger.
</p>
-Des:
##----------------------------------------
=Pkg: mono-devel 2.6.7 0.7.19 x86_64
=Sum: Mono development tools
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications.
This package contains compilers and other tools needed to develop .NET applications.
</p><p>
Mono development tools.
</p>
-Des:
##----------------------------------------
=Pkg: mono-extras 2.6.7 0.7.19 x86_64
=Sum: Dodatečné balíčky
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Extra packages.
</p>
-Des:
##----------------------------------------
=Pkg: mono-jscript 2.6.7 0.7.19 x86_64
=Sum: JScript .NET podpora pro Mono
+Des:
<!-- DT:Rich -->
<p>This package contains the JScript .NET compiler and language
runtime. This allows you to compile and run JScript.NET application
and assemblies.
</p>
-Des:
##----------------------------------------
=Pkg: mono-locale-extras 2.6.7 0.7.19 x86_64
=Sum: Extra locale information
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Extra locale information.
</p>
-Des:
##----------------------------------------
=Pkg: mono-nunit 2.6.7 0.7.19 x86_64
=Sum: NUnit Testing Framework
+Des:
<!-- DT:Rich -->
<p>NUnit is a unit-testing framework for all .Net languages.  Initially ported from JUnit, the current release, version 2.2,  is the fourth major release of this  Unit based unit testing tool for Microsoft .NET. It is written entirely in C# and  has been completely redesigned to take advantage of many .NET language             features, for example custom attributes and other reflection related capabilities. NUnit brings xUnit to all .NET languages.
</p>
-Des:
##----------------------------------------
=Pkg: mono-wcf 2.6.7 0.7.19 x86_64
=Sum: Mono implementation of ASP.NET, Remoting and Web Services
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono implementation of ASP.NET, Remoting and Web Services.
</p>
-Des:
##----------------------------------------
=Pkg: mono-web 2.6.7 0.7.19 x86_64
=Sum: Mono implementation of ASP.NET, Remoting and Web Services
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono implementation of ASP.NET, Remoting and Web Services.
</p>
-Des:
##----------------------------------------
=Pkg: mono-winforms 2.6.7 0.7.19 x86_64
=Sum: Mono's Windows Forms implementation
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono&#39;s Windows Forms implementation.
</p>
-Des:
##----------------------------------------
=Pkg: monodoc-core 2.6.7 0.7.19 x86_64
=Sum: Monodoc -- prohlížeč dokumentace napsaný v C#
+Des:
<!-- DT:Rich -->
<p>Monodoc is a documentation browser for the Mono
project. It is written in C# using the GTK# libraries.
</p>
-Des:
##----------------------------------------
=Pkg: moonlight-plugin 2.4.1 0.5.1 x86_64
=Sum: Browser plugin for Novell Moonlight
+Des:
<!-- DT:Rich -->
<p>Browser plugin for Novell Moonlight.
</p><p>
Moonlight is an open source implementation of Microsoft Silverlight for Unix systems.
</p>
-Des:
##----------------------------------------
=Pkg: moonlight-tools 2.4.1 0.5.1 x86_64
=Sum: Various tools for Novell Moonlight
+Des:
<!-- DT:Rich -->
<p>Various tools for Novell Moonlight development.
</p><p>
Moonlight is an open source implementation of Microsoft Silverlight for Unix systems.
</p>
-Des:
##----------------------------------------
=Pkg: moonshine 0.7 0.10.22 x86_64
=Sum: Desktop Shell for the Moonshine Media Player Plugin
+Des:
<!-- DT:Rich -->
<p>Moonshine leverages the Windows Media capabilities from Silverlight, provided by the Moonlight browser plugin on Linux, and the Firefox web browser framework to enable the playback of embedded Windows Media content on the web and local files on a user&#39;s desktop.
</p>
-Des:
##----------------------------------------
=Pkg: moonshine-plugin 0.7 0.10.22 x86_64
=Sum: Desktop Shell for the Moonshine Media Player Plugin
+Des:
<!-- DT:Rich -->
<p>Moonshine leverages the Windows Media capabilities from Silverlight, provided by the Moonlight browser plugin on Linux, and the Firefox web browser framework to enable the playback of embedded Windows Media content on the web and local files on a user&#39;s desktop.
</p>
-Des:
##----------------------------------------
=Pkg: mousetweaks 2.28.2 0.1.116 x86_64
=Sum: Tweak mouse settings in GNOME
+Des:
<!-- DT:Rich -->
<p>The Mousetweaks package provides mouse accessibility enhancements for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: mousetweaks-lang 2.28.2 0.1.116 x86_64
=Sum: Tweak mouse settings in GNOME
+Des:
<!-- DT:Rich -->
<p>The Mousetweaks package provides mouse accessibility enhancements for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-kde4-integration 0.6.3 5.6.5 x86_64
=Sum: Mozilla KDE Integration
+Des:
<!-- DT:Rich -->
<p>Package providing integration of Mozilla applications with KDE.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr-32bit 4.8.9 1.2.2.1 x86_64
=Sum: Netscape Portable Runtime
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr 4.8.9 1.2.2.1 x86_64
=Sum: Netscape Portable Runtime
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss 3.13.1 0.2.1 x86_64
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>NSS (Network Security Services) jsou knihovny umožňující meziplatformní vývoj aplikací s podporou bezpečnosti. Aplikace s NSS mohou podporvat SSL v2 a v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certifikáty a další bezpečnostní standardy.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss-32bit 3.13.1 0.2.1 x86_64
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>NSS (Network Security Services) jsou knihovny umožňující meziplatformní vývoj aplikací s podporou bezpečnosti. Aplikace s NSS mohou podporvat SSL v2 a v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certifikáty a další bezpečnostní standardy.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss-tools 3.13.1 0.2.1 x86_64
=Sum: Tools for developing, debugging, and managing applications that use NSS.
+Des:
<!-- DT:Rich -->
<p>NSS bezpečnostní nástroje umožňují vývojářům testovat, ladit a spravovat aplikace používající NSS.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192-32bit 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192-gnome 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192-gnome-32bit 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192-translations 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner192-translations-32bit 1.9.2.24 0.3.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.2
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: msynctool 0.22 36.21 x86_64
=Sum: CLI for synchronization with OpenSync
+Des:
<!-- DT:Rich -->
<p>Command line interface for libopensync to allow synchronization on machines which lack a X server. It relies on the OpenSync framework to do the actual synchronization. You need to install the libopensync package and the plugins for it, too.
</p>
-Des:
##----------------------------------------
=Pkg: mtools 3.9.11 165.31 x86_64
=Sum: Přístup k souborům na MS-DOSových discích
+Des:
<!-- DT:Rich -->
<p>Programy z balíčku umožňují nekomplikovaný přístup k MS-DOSovým systémům
souborů na disku, bez nutnosti připojovat disky příkazem mount. Balíček
obsahuje příkazy mdir, mcd, mcopy, mformat pro práci s MS-DOSovými soubory.
</p><p>
Poskytuje také XDF podporu pro OS/2.
</p>
-Des:
##----------------------------------------
=Pkg: multipath-tools 0.4.9 0.60.1 x86_64
=Sum: Tools to Manage Multipathed Devices with the device-mapper
+Des:
<!-- DT:Rich -->
<p>This package provides the tools to manage multipathed devices by
instructing the device-mapper multipath module what to do. The tools are:
<ul>
<li>multipath:
scans the system for multipathed devices, assembles them, and updates the device-mapper&#39;s maps

</li><li>multipathd:
waits for maps events then execs multipath

</li><li>devmap-name:
provides a meaningful device name to udev for devmaps

</li><li>kpartx:
maps linear devmaps to device partitions, which makes multipath maps partionable
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: multisync-gui 0.91.0 178.35 x86_64
=Sum: GUI for synchronization with OpenSync
+Des:
<!-- DT:Rich -->
<p>Graphical version of MultiSync for the libopensync package. To allow synchronization on machines which use a X server. It relies on the OpenSync framework to do the actual synchronization. You need to install the libopensync package and the plugins for it, too. This package is independent from the various multisync-* packages which will be obsoleted once OpenSync has left the beta phase.
</p>
-Des:
##----------------------------------------
=Pkg: mutt 1.5.17 42.33.1 x86_64
=Sum: Poštovní program
+Des:
<!-- DT:Rich -->
<p>Vysoce výkonný poštovní program. Podporuje, kromě jiného, také vlákna
 (threading) a PGP.
Trvá ovšem nějaký čas, než si na něj zvyknete.
</p>
-Des:
##----------------------------------------
=Pkg: mysql 5.0.94 0.2.4.1 x86_64
=Sum: Skutečně víceuživatelský a vícevláknový databázový SQL server
+Des:
<!-- DT:Rich -->
<p>SQL je nejpopulárnější databázový jazyk na světě. MySQL je implementace
databázového systému používající přístup klient/server. Sestává ze
serverového démona mysqld a množství dalších klientských programů
a knihoven.
</p><p>
Hlavními cíli MySQL jsou rychlost, robustnost a snadnost použití. Systém
MySQL byl vyvinut, protože vývojáři v TcX potřebovali SQL server, který
by mohl zpracovávat velmi rozsáhlé databáze rychlostí o řád vyšší, než
jakou nabízely ostatní databázové systémy. Od roku 1996 používají MySQL
v prostředí s více než 40 databázemi obsahujícími 10 000 tabulek, z nichž
více než 500 má více než 7 miliónů řádků. Celkem se jedná o přibližně
100 gigabytů životně důležitých dat.
</p><p>
MySQL je založena na sadě funkcí, které jsou používány po mnoho let ve
vysoce náročném výrobním prostředí. Přestože je MySQL v neustálém vývoji,
již nyní poskytuje bohatou a vysoce užitečnou sadu funkcí.
</p><p>
Oficiální výslovnost je &quot;maj es kjů el&quot; (nikoli MY-SEQUEL).
</p><p>
Tento balíček obsahuje pouze serverovou část.
</p>
-Des:
##----------------------------------------
=Pkg: mysql-client 5.0.94 0.2.4.1 x86_64
=Sum: Klient pro MySQL
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje standardní MySQL klienty.
</p>
-Des:
##----------------------------------------
=Pkg: nabi 0.15 2.16 x86_64
=Sum: Korejský systém vstupní metody Nabi
+Des:
<!-- DT:Rich -->
<p>Korejská systém vstupní metody Nabi.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus 2.28.4 1.10.1 x86_64
=Sum: Správce souborů pro  GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje program Nautilus, pokročilého správce souborů pro GNOME 2.x
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-32bit 2.28.4 1.10.1 x86_64
=Sum: Správce souborů pro  GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje program Nautilus, pokročilého správce souborů pro GNOME 2.x
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner 2.25.3 3.1.179 x86_64
=Sum: Rozšíření pro pálení CD v Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner je rozšíření pro Nautilus, s jehož pomocí lze jednoduše
pálit CD.
</p><p>
Uživatel používající Nautilus, nebo jinou aplikaci spolupracující s GNOME
VFS, zkopíruje soubory na &quot;burn:///,&quot; a poté se spustí Nautilus-cd-burner,
který zapíše soubory na CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner-32bit 2.25.3 3.1.179 x86_64
=Sum: Rozšíření pro pálení CD v Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner je rozšíření pro Nautilus, s jehož pomocí lze jednoduše
pálit CD.
</p><p>
Uživatel používající Nautilus, nebo jinou aplikaci spolupracující s GNOME
VFS, zkopíruje soubory na &quot;burn:///,&quot; a poté se spustí Nautilus-cd-burner,
který zapíše soubory na CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner-lang 2.25.3 3.1.179 x86_64
=Sum: Rozšíření pro pálení CD v Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner je rozšíření pro Nautilus, s jehož pomocí lze jednoduše
pálit CD.
</p><p>
Uživatel používající Nautilus, nebo jinou aplikaci spolupracující s GNOME
VFS, zkopíruje soubory na &quot;burn:///,&quot; a poté se spustí Nautilus-cd-burner,
který zapíše soubory na CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-eiciel 0.9.6.1 11.16.1 x86_64
=Sum: Nautilus ACL viewer and editor extension
+Des:
<!-- DT:Rich -->
<p>A Nautilus extension that allows viewing and editing ACL permissions.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-gnome-main-menu 0.9.13 4.18.2 x86_64
=Sum: Nabídka plochy GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME nabídka a prohlížeč aplikací
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-group 0.1 0.2.26 x86_64
=Sum: Nautilus file group
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to
group the files. The user can operate files group by group.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-group-lang 0.1 0.2.26 x86_64
=Sum: Nautilus file group
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to
group the files. The user can operate files group by group.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-ifolder3 3.8.0.10050.1 0.3.45 x86_64
=Sum: Modul Nautilu s podporou iFolder
+Des:
<!-- DT:Rich -->
<p>Obsahuje iFolder modul pro správce souborů Nautilus.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-lang 2.28.4 1.10.1 x86_64
=Sum: Správce souborů pro  GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje program Nautilus, pokročilého správce souborů pro GNOME 2.x
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-open-terminal 0.17 1.2.87 x86_64
=Sum: Nautilus Open Terminal
+Des:
<!-- DT:Rich -->
<p>Rozšíření Nautila, které umožňuje otevřít terminál v lokálních souborech.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-open-terminal-lang 0.17 1.2.87 x86_64
=Sum: Nautilus Open Terminal
+Des:
<!-- DT:Rich -->
<p>Rozšíření Nautila, které umožňuje otevřít terminál v lokálních souborech.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-search-tool 0.3.0 1.1.123 x86_64
=Sum: A Nautilus extension to put "Search for Files" on the context menu of folders
+Des:
<!-- DT:Rich -->
<p>This package adds an option to the context menu of folders in Nautilus to
search for files.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-search-tool-lang 0.3.0 1.1.123 x86_64
=Sum: A Nautilus extension to put "Search for Files" on the context menu of folders
+Des:
<!-- DT:Rich -->
<p>This package adds an option to the context menu of folders in Nautilus to
search for files.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto 2.28.0 1.5.46 x86_64
=Sum: Integrate Nautilus, Evolution, and Gaim
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution and Gaim.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto-lang 2.28.0 1.5.46 x86_64
=Sum: Integrate Nautilus, Evolution, and Gaim
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution and Gaim.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto-plugin-empathy 2.28.0 1.5.46 x86_64
=Sum: Empathy plugin for nautilus-sendto
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution, Empathy and Pidgin.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto-plugin-evolution 2.28.0 1.5.46 x86_64
=Sum: Evolution plugin for nautilus-sendto
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution, Empathy and Pidgin.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto-plugin-pidgin 2.28.0 1.5.46 x86_64
=Sum: Pidgin plugin for nautilus-sendto
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution, Empathy and Pidgin.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-sendto-plugin-upnp 2.28.0 1.5.46 x86_64
=Sum: Integrate Nautilus, Evolution, Empathy and Pidgin
+Des:
<!-- DT:Rich -->
<p>This package provides the functionality to the Nautilus file browser to send files over e-mail or instant messaging protocols via Evolution, Empathy and Pidgin.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-share 0.7.2 78.26.4 x86_64
=Sum: A Quick and Easy Way to Share Folders in Nautilus Via Samba
+Des:
<!-- DT:Rich -->
<p>Application for the GNOME desktop integrated in Nautilus, that allows simple use of Nautilus shares without signing in as root.
</p><p>
Features:<ul>
<li>A new entry in your Nautilus right-click menu with a nice icon.

</li><li>A simple dialog to share your folder, which allows you to choose a name and decide whether to make it read-only.

</li><li>Possibility to access it from the Properties tab of your folder.

</li><li>Possibility to see whether a share name already exists by simply typing it.

</li><li>Nautilus displays a palm icon to visually show you which folders are shared.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: nautilus-share-lang 0.7.2 78.26.4 x86_64
=Sum: A Quick and Easy Way to Share Folders in Nautilus Via Samba
+Des:
<!-- DT:Rich -->
<p>Application for the GNOME desktop integrated in Nautilus, that allows simple use of Nautilus shares without signing in as root.
</p><p>
Features:<ul>
<li>A new entry in your Nautilus right-click menu with a nice icon.

</li><li>A simple dialog to share your folder, which allows you to choose a name and decide whether to make it read-only.

</li><li>Possibility to access it from the Properties tab of your folder.

</li><li>Possibility to see whether a share name already exists by simply typing it.

</li><li>Nautilus displays a palm icon to visually show you which folders are shared.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: nautilus-totem 2.28.4 1.2.43 x86_64
=Sum: Totem Plugin for Nautilus
+Des:
<!-- DT:Rich -->
<p>Totem is movie player for the GNOME desktop based on GStreamer.
</p><p>
This package contains a plugin to integrate Totem into Nautilus.
</p>
-Des:
##----------------------------------------
=Pkg: ncpfs 2.2.6 147.27.1 x86_64
=Sum: Nástroje pro zpřístupnění Novellovských systémů souborů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje podporu pro připojování k souborovým serverům Novell
Netware. Umožňuje také používat tiskové služby Novellovských serverů.
</p>
-Des:
##----------------------------------------
=Pkg: ncpfs-32bit 2.2.6 147.27.1 x86_64
=Sum: Nástroje pro zpřístupnění Novellovských systémů souborů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje podporu pro připojování k souborovým serverům Novell
Netware. Umožňuje také používat tiskové služby Novellovských serverů.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses-utils 5.6 90.55 x86_64
=Sum: Tools using the new curses libraries
+Des:
<!-- DT:Rich -->
<p>The ncurses based utilities are as follows:
</p><p>
clear -- emits clear-screen for current terminal
</p><p>
toe   -- table of entries utility
</p><p>
tput  -- shell-script access to terminal capabilities.
</p><p>
tset  -- terminal-initialization utility
</p><p>
reset -- terminal initialization utility
</p>
-Des:
##----------------------------------------
=Pkg: ndiswrapper 1.57rc1 0.7.52 x86_64
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that &quot;wraps
around&quot; NDIS (Windows network driver API) drivers.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Pro nastavení založené na ndiswrapperu není dostupná podpora a v případě, že bude zaveden ndiswrapper, nebudou hlášení o chybách jádra přijmuty.
</p>
-Ins:
##----------------------------------------
=Pkg: ndiswrapper-kmp-default 1.57rc1_3.0.13_0.27 0.7.52 x86_64
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that &quot;wraps
around&quot; NDIS (Windows network driver API) drivers.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Pro nastavení založené na ndiswrapperu není dostupná podpora a v případě, že bude zaveden ndiswrapper, nebudou hlášení o chybách jádra přijmuty.
</p>
-Ins:
##----------------------------------------
=Pkg: ndiswrapper-kmp-trace 1.57rc1_3.0.13_0.27 0.7.52 x86_64
=Sum: Use Microsoft NDIS Network Drivers for WLAN Cards
+Des:
<!-- DT:Rich -->
<p>Some wireless LAN vendors refuse to release hardware specifications or
drivers for their products for operating systems other than Microsoft
Windows. The ndiswrapper project makes it possible to use such
hardware with Linux by means of a loadable kernel module that &quot;wraps
around&quot; NDIS (Windows network driver API) drivers.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Pro nastavení založené na ndiswrapperu není dostupná podpora a v případě, že bude zaveden ndiswrapper, nebudou hlášení o chybách jádra přijmuty.
</p>
-Ins:
##----------------------------------------
=Pkg: net-snmp 5.4.2.1 8.12.6.1 x86_64
=Sum: SNMP démon
+Des:
<!-- DT:Rich -->
<p>Balíček byl původně postaven na kódu  snmp CMU 2.1.2..
Byl upraven a restrukturalizován vylepšn a opraven.
V roce 1995 došlo k přejmenování programu na ucd-snmp a v roce 2000
z ucd-snmp na net-snmp.
</p>
-Des:
##----------------------------------------
=Pkg: net-tools 1.60 725.32.2.1 x86_64
=Sum: Důležité síťové programy
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základní programy pro správu a údržbu sítě:
netstat, hostname, arp, ifconfig, rarp a route.
</p>
-Des:
##----------------------------------------
=Pkg: netatalk 2.0.3 249.21.1 x86_64
=Sum: Appletalk pro Linux
+Des:
<!-- DT:Rich -->
<p>Netatalk je implementace AppleTalk Protocol Suite pro UNIX/Linux systémy.
Poslední verze podporuje Ethertalk phase I and II, DDP, RTMP, NBP, ZIP, AEP, ATP, PAP, ASP a AFP.
Poskytuje také Apple Talk tiskové a směrovací služby na systémech Solaris 2.5, Linux, FreeBSD,
 SunOS 4.1, and Ultrix 4. Také podporuje AFP 2.1 a 2.2 (AppleShare IP).
</p>
-Des:
##----------------------------------------
=Pkg: netcat 1.10 1005.22 x86_64
=Sum: Jednoduchý, ale výkonný síťový nástroj
+Des:
<!-- DT:Rich -->
<p>Netcat je jednoduchý program pro Unix, který slouží ke čtení a zápisu dat
do síťového spojení s použitím protokolu TCP nebo UDP. Program je navržen
jako spolehlivý nástroj v pozadí, který buď může být používán přímo nebo
může být snadno řízený jinými programy a skripty. Současně slouží jako
účinný nástroj pro ladění a průzkum síťové komunikace, protože umí vytvořit
téměř libovolný druh spojení a má několik zajímavých vestavěných schopností.
</p><p>
Dokumentaci naleznete v /usr/share/doc/packages/netcat/README.
</p>
-Des:
##----------------------------------------
=Pkg: netcat-openbsd 1.89 78.6.1 x86_64
=Sum: TCP/IP swiss army knife
+Des:
<!-- DT:Rich -->
<p>A simple Unix utility which reads and writes data across network connections using TCP or UDP protocol. It is designed to be a reliable &quot;bac
k-end&quot; tool that can be used directly or easily driven by other programs and scripts. At the same time it is a feature-rich network debuggin
g and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.
</p><p>
This package contains the OpenBSD rewrite of netcat, including support for IPv6, proxies, and Unix sockets.
</p>
-Des:
##----------------------------------------
=Pkg: netpbm 10.26.44 101.9.1 x86_64
=Sum: Výkonný balíček pro grafické konverze
+Des:
<!-- DT:Rich -->
<p>Poslední verze sady programů Portable Bitmap Plus Utilities. Tento rozsáhlý
balíček, který je nyní dostupný pro všechny hardwarové platformy,
poskytuje nástroje pro grafické konverze. Při použití těchto nástrojů, mohou
být obrázky konvertovány z téměř libovolného formátu do libovolného jiného
formátu. Mimo jiné jsou podporovány formáty GIF, PC-Paintbrush, IFF ILBM,
Gould Scanner, MTV raytracer, Atari Degas .pi1 a .pi3, Macintosh PICT,
HP Paintjet, QRT raytracer, AUTOCAD slide, Atari Spectrum (jak komprimované
tak nekomprimované), Andrew Toolkit raster object a mnoho dalších. Balíček
zahrnuje i manuálové stránky pro všechny nástroje.
</p>
-Des:
##----------------------------------------
=Pkg: newt 0.52.10 1.35.7 x86_64
=Sum: Uživatelské rozhraní pro konzoli Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>Newt is a programming library for color text-mode, widget-based user interfaces.  Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces.
</p><p>
This package also contains a Dialog replacement called whiptail. Newt is based on the slang library.
</p>
-Des:
##----------------------------------------
=Pkg: nfs-client 1.2.3 18.17.2 x86_64
=Sum: Support Utilities for NFS
+Des:
<!-- DT:Rich -->
<p>This package contains common NFS utilities which are needed for client and kernel based server.
</p>
-Des:
##----------------------------------------
=Pkg: nfs-kernel-server 1.2.3 18.17.2 x86_64
=Sum: Podpůrné programy pro nfsd realizovaný v jádře
+Des:
<!-- DT:Rich -->
<p>This package contains support for the kernel based NFS server. You can tune the number of server threads via the sysconfig variable USE_KERNEL_NFSD_NUMBER.
For quota over NFS support, install the quota package.
</p>
-Des:
##----------------------------------------
=Pkg: nfs4-acl-tools 0.3.3 2.6.1 x86_64
=Sum: Command line tools for managing ACLs over NFSv4
+Des:
<!-- DT:Rich -->
<p>Command line tools for viewing and setting ACLs (Access Control Lists) when using NFSv4 to access a remote filesystem.  The remote filesystem must also support ACLs.
</p>
-Des:
##----------------------------------------
=Pkg: nfsidmap 0.20 1.20 x86_64
=Sum: NFSv4 ID Mapping Library
+Des:
<!-- DT:Rich -->
<p>In NFSv4, identities of users are conveyed by names rather than user ID
and group ID. Both the NFS server and client code in the kernel need to
translate these to numeric IDs.
</p>
-Des:
##----------------------------------------
=Pkg: nh2ps 2.3.1 521.8 x86_64
=Sum: Hangul text/postscript konvertor
+Des:
<!-- DT:Rich -->
<p>Hangul Text/Postscript konvertor
od Choi Jun Ho, &lt;junker@jazz.snu.ac.kr&gt;.
</p>
-Des:
##----------------------------------------
=Pkg: nici 2.7.4 0.4.2 x86_64
=Sum: NICI US and Worldwide (128 bit) Crypto
+Des:
<!-- DT:Rich -->
<p>This package provides Cryptographic Services to Novell services and is based on
BSAFE (C) RSA 1998-2009.
</p>
-Des:
##----------------------------------------
=Pkg: nici64 2.7.4 0.4.2 x86_64
=Sum: NICI US and Worldwide (128 bit) Crypto
+Des:
<!-- DT:Rich -->
<p>This package provides Cryptographic Services to Novell services and is based on
BSAFE (C) RSA 1998-2009.
</p>
-Des:
##----------------------------------------
=Pkg: njb-sharp 0.3.0 183.41 x86_64
=Sum: Mono/C# Bindings to libnjb
+Des:
<!-- DT:Rich -->
<p>Mono/C# Bindings to libnjb
</p>
-Des:
##----------------------------------------
=Pkg: nkf 2.0.5 36.8 x86_64
=Sum: Síťový konvertor kódu kanji
+Des:
<!-- DT:Rich -->
<p>Nkf je další z konvertorů kanji kódu pro sítě, počítače a terminály.
Konvertuje vstupní kanji kód na zvolený kanji kód jako je 7 bitový JIS,
MS-kanji (shifted-JIS) nebo EUC.
</p>
-Des:
##----------------------------------------
=Pkg: notification-daemon 0.3.7 185.34.2 x86_64
=Sum: Notification Daemon
+Des:
<!-- DT:Rich -->
<p>D-BUS démon.
</p>
-Des:
##----------------------------------------
=Pkg: notification-daemon-lang 0.3.7 185.34.2 x86_64
=Sum: Notification Daemon
+Des:
<!-- DT:Rich -->
<p>D-BUS démon.
</p>
-Des:
##----------------------------------------
=Pkg: notify-sharp 0.4.0 115.40 x86_64
=Sum: notify-sharp is a C# client implementation for Desktop Notifications
+Des:
<!-- DT:Rich -->
<p>notify-sharp is a C# client implementation for Desktop Notifications,
i.e. notification-daemon. It is inspired by the libnotify API.
</p><p>
Desktop Notifications provide a standard way of doing passive pop-up
notifications on the Linux desktop. These are designed to notify the
user of something without interrupting their work with a dialog box
that they must close. Passive popups can automatically disappear after
a short period of time.
</p>
-Des:
##----------------------------------------
=Pkg: novell-NLDAPbase-dyn 3.4.1 106.16 x86_64
=Sum: LDAP SSL knihovny
+Des:
<!-- DT:Rich -->
<p>The package contains LDAP SSL libraries and LDAP extension libraries for C
</p>
-Des:
##----------------------------------------
=Pkg: novell-NLDAPsdk-dyn 3.4.1 106.16 x86_64
=Sum: LDAP SDK Libraries
+Des:
<!-- DT:Rich -->
<p>The package contains LDAP libraries for C
</p><p>
LDAP Libraries for C enables to write applications to access, manage, update and search for information stored in Novell eDirectory256 and other LDAP-aware directoies.
</p>
-Des:
##----------------------------------------
=Pkg: novell-client 3.0.0 0.18.20.7 x86_64
=Sum: Novell Client for Linux
+Des:
<!-- DT:Rich -->
<p>The Novell Client for Linux workstation software extends the capabilities of a Linux desktop by providing access to NetWare and Open Enterprise Servers (OES).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>Novell Client(TM) 2 for SUSE(R) Linux Enterprise 11
Licen?n? smlouva k softwaru Novell(R) 
</p><p>
P?E?T?TE SI POZORN? TUTO SMLOUVU. INSTALAC?, STA?EN?M NEBO JIN?M
POU??V?N?M SOFTWARU VYJAD?UJETE SOUHLAS S?TOUTO SMLOUVOU. POKUD S
T?MITO PODM?NKAMI NESOUHLAS?TE, SOFTWARE NESTAHUJTE, NEINSTALUJTE ANI
NEPOU??VEJTE. JE-LI TO MO?N?, VRA?TE V?TAKOV?M P??PAD? NEPOU?IT?
BALEN? PRODEJCI SPOLU S?DOKLADEM O?KOUPI, A?OBDR??TE N?HRADU. SOFTWARE
NESM? B?T PROD?N, POSTOUPEN ANI D?LE ???EN BEZ SOUHLASU SPOLE?NOSTI
NOVELL. 
</p><p>
Tato licen?n? smlouva k?softwaru Novell (&quot;Smlouva&quot;) je pr?vn? smlouva
mezi v?mi (subjektem nebo osobou) a?spole?nost? Novell,?Inc.
(&quot;Novell&quot;). Softwarov? produkt uveden? v?n?zvu t?to Smlouvy, m?dia a
doprovodn? dokumentace (souhrnn?m ozna?en?m &quot;Software&quot;) jsou chr?n?ny
autorsk?mi pr?vy a??mluvami Spojen?ch st?t? americk?ch (&quot;USA&quot;) a
dal??ch zem? a?vztahuj? se na n? podm?nky t?to Smlouvy. V?echny
aktualizace a podp?rn? verze Softwaru, kter? m??ete st?hnout ?i z?skat
a kter? nejsou doprov?zeny licen?n? smlouvou v?slovn? nahrazuj?c? tuto
Smlouvu, jsou pova?ov?ny za Software a ??d? se touto Smlouvou. Pokud
je Software aktualizac? nebo podp?rnou verz?, mus?te m?t pro instalaci
a?pou??v?n? aktualizace nebo podp?rn? verze platnou licenci k?p?vodn?
verzi a?po?tu u?ivatel? Softwaru.  
</p><p>
Software m??e b?t dod?v?n jako sou??st jin?ch softwarov?ch program?
nebo v?kombinaci s?nimi. Na?tyto jin? softwarov? programy se?mohou
vztahovat jin? licen?n? podm?nky a?mohou b?t licencov?ny jin?m
poskytovatelem licence ne? spole?nost? Novell. Pou?it? jak?chkoli
softwarov?ch program? se?samostatnou licen?n? smlouvou se???d? touto
samostatnou licen?n? smlouvou. Pokud je se Softwarem dod?v?n jak?koli
software jin?ho v?robce, je jeho pou??v?n? z?le?itost? va?? volby.  
</p><p>
U?IT? V R?MCI LICENCE 
</p><p>
Komer?n? software. 
</p><p>
Licencov?n?. Spole?nost Novell v?m poskytuje nev?hradn? a
nep?evoditeln? pr?vo k intern?mu kop?rov?n? a pou??v?n? Softwaru na
z?klad? podm?nek t?to smlouvy. 
</p><p>
Zku?ebn? kopie softwaru. Pokud se jedn? o?verzi Softwaru ur?enou k
vyzkou?en? nebo pokud v?m byl software poskytnut za???elem posouzen?,
je?va?e licence k?u?it? Softwaru omezena pouze na intern? vyzkou?en?
Softwaru v?souladu s?podm?nkami nab?dky k?vyzkou?en?, na?jej?m?
z?klad? jste Software obdr?eli. Platnost t?to licence vypr?? za 90?dn?
od?instalace (p??padn? v?jin? lh?t? ur?en? Softwarem). Po?vypr?en?
platnosti licence m??e Software p?estat fungovat. Po vypr?en? lh?ty k
posouzen? mus?te Software p?estat pou??vat, vr?tit do p?vodn?ho stavu
v?echny Softwarem proveden? akce a zcela ho odstranit ze syst?mu.
Software m??e obsahovat mechanismus automatick?ho zablokov?n?, kter?
zabra?uje jeho pou??v?n? po?uplynut? ur?it? lh?ty. M?li byste proto
prov?st z?lohu syst?mu a?p?ijmout dal?? opat?en? proti ztr?t?m soubor?
nebo dat.  
</p><p>
OMEZEN? 
</p><p>
Licen?n? omezen?. Spole?nost Novell si?vyhrazuje v?echna pr?va, kter?
v?m nebyla v?slovn? poskytnuta. Software je?v?m licencov?n pouze pro
vnit?n? pou?it?. Nesm?te (1)?zp?tn? p?ekl?dat, dekompilovat nebo
analyzovat Software mimo rozsah v?slovn? povolen? p??slu?n?mi z?kony.
(2)?Upravovat, m?nit, pronaj?mat, hostitelsky sd?let nebo p?j?ovat
Software, p??padn? d?le postupovat kter?koli z?va?ich pr?v plynouc?ch
z?t?to Smlouvy nebo (4)?p?ev?d?t Software nebo va?e licen?n? pr?va
plynouc? z?t?to smlouvy, a? ji? vcelku nebo ??ste?n?, bez p?semn?ho
povolen? spole?nosti Novell. 
</p><p>
Licence na sady. Pokud se?licence k?pou??v?n? Softwaru vztahuje na
sadu produkt?, m??e produkty v?sad? pou??vat pod jednou licenc? pouze
jeden u?ivatel. Licence k?sad? neumo??uje pou??v?n? jednotliv?ch
produkt? v sad? v?ce u?ivateli, v?p??pad? licencov?n? na z?klad? po?tu
u?ivatel?, nebo pou??v?n? v?ce za??zen?, v?p??pad? licencov?n? na
z?klad? po?tu za??zen? nebo server?. 
</p><p>
Z?ruka inovace. Pokud jste v?r?mci p??slu?n?ho programu spole?nosti
Novell k?tomuto Softwaru zakoupili z?ruku inovace nebo ?dr?by,
oprav?uje v?s z?ruka inovace nebo ?dr?by pouze k?inovaci Softwaru jako
celku a?neoprav?uje v?s k?inovaci programov?ch sou??st?, produkt?
dod?van?ch spolu se Softwarem ani jednotliv?ch produkt?, kter? jsou
sou??st? sady, je-li Software licencov?n jako sada produkt?. Je-li to
povoleno p??slu?nou politikou a programy spole?nosti Novell, m??ete si
samostatn? zakoupit z?ruku inovace pro jednotliv? sou??sti Softwaru. 
</p><p>
Inovace softwaru. Tato ??st se v?s t?k?, pokud jste zakoupili Software
s?cenou zalo?enou na inovac?ch. Pojem &quot;P?vodn? produkt&quot; ozna?uje
produkt, ze?kter?ho prov?d?te inovaci. Opr?vn?n? pou??vat Software
m?te pouze v?p??pad?, ?e jste opr?vn?n?m u?ivatelem P?vodn?ho produktu
a?spl?ujete n?sleduj?c? podm?nky: (1) Z?skali jste pr?vo pou??t
Software v?hradn? za ??elem nahrazen? P?vodn?ho produktu, kter? jste
z?skali leg?ln? cestou a?kter? byl ur?en k?inovaci Softwarem ve smyslu
politiky spole?nosti Novell uplat?ovan? v?okam?iku, kdy jste Software
z?skali; (2) P?vodn? produkt byl nainstalov?n a?pou??v?n v?souladu s
podm?nkami p??slu?n? licen?n? smlouvy; (3) Neprod?te ani jin?m
zp?sobem nep?evedete vlastnictv? P?vodn?ho produktu. 
</p><p>
Podpora. Spole?nost Novell nen? povinna zaji??ovat podporu Softwaru,
pokud si nezakoup?te nab?dku, kter? slu?by podpory v?slovn? zahrnuje.
Pokud si zakoup?te takov? produkt a na slu?by podpory se nebude
nevztahovat ??dn? samostatn? smlouva, poskytov?n? takov?ch slu?eb
podpory (&quot;Slu?by&quot;) se bude ??dit podm?nkami t?to Smlouvy. Dal??
informace ohledn? aktu?ln? nab?dky podpory spole?nosti Novell m??ete
z?skat na?internetov? adrese http://www.novell.com/support. 
</p><p>
VLASTNICTV?  
</p><p>
Nep?ech?z? na?v?s n?rok na?Software ani na jeho vlastnictv?.
Spole?nost Novell a/nebo jej? poskytovatel? licenc? si ponech?vaj?
ve?ker? pr?va, n?roky a pod?l na du?evn?m vlastnictv? Softwaru a
Slu?eb, v?etn? jak?chkoli ?prav a?jejich kopi?. Z?sk?v?te pouze
podm?n?nou licenci k?pou??v?n? Softwaru. 
</p><p>
OMEZEN? Z?RUKA 
</p><p>
Spole?nost Novell po?dobu devades?ti (90) dn? od?zakoupen? zaru?uje,
?e (1)?m?dia, na?nich? je?Software dod?v?n, neobsahuj? fyzick? vady a
(2)?software bude v?podstatn?ch rysech odpov?dat doprovodn?
dokumentaci. Pokud b?hem devades?ti (90) dn? od?zakoupen? Softwaru
vr?t?te spole?nosti Novell vadn? m?dia nebo pokud ve?stejn? dob?
ozn?m?te nesoulad s parametry, spole?nost Novell v?hradn? dle
vlastn?ho uv??en? tento nesoulad vy?e?? nebo v?m vr?t? licen?n?
poplatky zaplacen? za?Software. Jak?koli neopr?vn?n? pou?it? nebo
?pravy Softwaru ru?? platnost t?to z?ruky. P?EDCHOZ? Z?RUKA
P?EDSTAVUJE JEDIN? MO?N? A?V?HRADN? N?PRAVN? KROK A?NAHRAZUJE VE?KER?
DAL?? Z?RUKY, A? JI? V?SLOVN? ?I?VYPL?VAJ?C?. (P?edchoz? z?ruka se
nevztahuje na?Software poskytovan? zdarma. TAKOV? SOFTWARE SE
POSKYTUJE &quot;TAK JAK JE&quot;, BEZ JAK?KOLI Z?RUKY.) 
</p><p>
Slu?by. Spole?nost Novell zaru?uje, ?e jak?koli zakoupen? slu?by budou
poskytnuty profesion?ln?m zp?sobem v souladu s obecn? p?ij?man?mi
standardy v oboru. Tato z?ruka bude platit po dobu 90 dn? od doru?en?
Slu?eb. P?i jak?mkoli poru?en? t?to z?ruky se spole?nost Novell
zavazuje, bu? napravit tyto slu?by tak, aby vyhov?ly t?to z?ruce nebo
podle sv?ho uv??en? nahradit ??stku, kterou jste spole?nosti Novell
zaplatili za ??st slu?eb, kter? t?to z?ruce nevyhovuj?. Proto?e
soubory mohou b?t v pr?b?hu poskytov?n? technick?ch slu?eb spole?nost?
Novell m?n?ny nebo po?kozeny, souhlas?te, ?e p?ijmete p?im??en?
opat?en? k izolov?n? a z?lohov?n? va?ich syst?m?. 
</p><p>
TENTO SOFTWARE NEN? NAVR?EN, VYTV??EN ANI UR?EN K?POU?IT? NEBO
DISTRIBUCI S?ONLINE ??DIC?M VYBAVEN?M PRO?NEBEZPE?N? PROST?ED?
VY?ADUJ?C? BEZCHYBN? PROVOZ, JAKO JSOU PROVOZY S?NUKLE?RN?MI
ZA??ZEN?MI, ??ZEN? LETECK?HO PROVOZU, KOMUNIKA?N? A?KONTROLN? SYST?MY,
ZA??ZEN? PRO PODPORU D?LE?IT?CH ?IVOTN?CH FUNKC?, ZBRA?OV? SYST?MY ANI
PRO JIN? POU?IT?, U?KTER?CH BY P??PADN? SELH?N? SOFTWARU MOHLO P??MO
V?ST K??MRT?, ZRAN?N? NEBO T?K?MU PO?KOZEN? ZDRAV? OSOB, P??PADN? K
PO?KOZEN? ?IVOTN?HO PROST?ED?. 
</p><p>
TENTO SOFTWARE JE?KOMPATIBILN? POUZE S?N?KTER?MI PO??TA?I A?OPERA?N?MI
SYST?MY. NA?SOFTWARE SE NEVZTAHUJE Z?RUKA, JE-LI POU??V?N V
NEKOMPATIBILN?CH SYST?MECH. Chcete-li z?skat informace t?kaj?c? se
kompatibility Softwaru, obra?te se telefonicky na spole?nost Novell
nebo na sv?ho prodejce. 
</p><p>
Produkty jin?ch v?robc?. Software m??e b?t dod?v?n spolu s hardwarem
nebo jin?mi softwarov?mi programy nebo slu?bami licencovan?mi nebo
prod?van?mi jin?mi subjekty ne? spole?nost? Novell. SPOLE?NOST NOVELL
NEPOSKYTUJE Z?RUKU NA PRODUKTY NEBO SLU?BY JIN?CH V?ROBC?. V?ECHNY
TAKOV? PRODUKTY NEBO SLU?BY JSOU POSKYTOV?NY &quot;TAK JAK JSOU&quot;. V?ECHNY
Z?RU?N? OPRAVY PRODUKT? JIN?CH V?ROBC? ZAJI??UJ? POSKYTOVATEL? LICENC?
T?CHTO PRODUKT? V?SOULADU S?PLATNOU Z?RUKOU POSKYTOVATELE LICENCE. 
</p><p>
NEN?-LI Z?KONEM STANOVENO JINAK, SPOLE?NOST NOVELL ODM?T? JAK?KOLI
P?EDPOKL?DAN? Z?RUKY, V?ETN? Z?RUK VZTAHUJ?C?CH SE?K
OBCHODOVATELNOSTI, VHODNOSTI PRO DAN? ??EL, PR?VN?M N?ROK?M NEBO
NEDODR?EN? SMLOUVY. SPOLE?NOST NOVELL NEPOSKYTUJE ??DN? Z?RUKY,
PROHL??EN? ANI Z?VAZKY, KTER? NEJSOU V?SLOVN? UVEDENY V?T?TO OMEZEN?
Z?RUCE. SPOLE?NOST NOVELL NEZARU?UJE, ?E SOFTWARE NEBO SLU?BY SPLN?
VA?E PO?ADAVKY ANI ?E JEJICH PROVOZ BUDE NEP?ERU?OVAN?. N?kter? m?stn?
p??slu?n? soudy neumo??uj? odm?tnut? ur?it?ch z?ruk nebo n?kter?
omezen?, proto je?mo?n?, ?e n?kter? z?v??e uveden?ch omezen? se?na?v?s
nevztahuj?. Omezen? z?ruka v?m d?v? ur?it? pr?va a krom? nich m??ete
m?t i?dal?? pr?va, kter? se li?? v?z?vislosti na st?tu nebo
jurisdikci.  
</p><p>
OMEZEN? ODPOV?DNOSTI 
</p><p>
N?sledn? ztr?ty. SPOLE?NOST NOVELL ANI ??DN? Z?JEJ?CH POSKYTOVATEL?
LICENC?, P?IDRU?EN?CH SPOLE?NOST? NEBO ZAM?STNANC? NENESE ODPOV?DNOST
ZA?JAK?KOLI ZVL??TN?, N?HODN?, N?SLEDN?, NEP??M?, ?MYSLN?, EKONOMICK?
NEBO TRESTN? ?KODY ZP?SOBEN? POU?IT?M SOFTWARU NEBO SLU?EB NEBO
NEMO?NOST? JE POU??T, MIMO JIN? V?ETN? ZTR?TY ZISKU, ?KOD P?I
PODNIK?N? NEBO ZTR?TY DAT, A?TO I?V?P??PAD?, ?E BYLA NA?MO?NOST VZNIKU
TAKOV?CH ?KOD UPOZORN?NA. P??m? ?kody. CELKOV? ODPOV?DNOST SPOLE?NOSTI
NOVELL ZA?P??M? ?KODY NA MAJETKU NEBO OSOBN? ?JMY (A? JI? SE?JEDN? O
JEDEN P??PAD NEBO O??ADU P??PAD?) V???DN?M P??PAD? NEP?ES?HNE
1,25N?SOBEK ??STKY, KTEROU JSTE ZAPLATILI ZA?SOFTWARE NEBO SLU?BY,
KTER? VZNIK N?ROKU ZP?SOBILY (NEBO 50?USD, POKUD JSTE SOFTWARE Z?SKALI
ZDARMA). V??e uveden? vylou?en? a omezen? se?nevztahuj? na?n?roky
souvisej?c? s??mrt?m nebo zran?n?m osob. V?r?mci p?sobnosti soud?,
kter? neumo??uj? vylou?en? nebo omezen? n?hrady ?kody, bude
odpov?dnost spole?nosti Novell omezena nebo vylou?ena v?maxim?ln?m
povolen?m rozsahu. 
</p><p>
V?EOBECN? PODM?NKY 
</p><p>
Doba trv?n?. Tato Smlouva vstupuje v?platnost dnem leg?ln?ho z?sk?n?
Softwaru a?bude automaticky ukon?ena, poru??te-li jakoukoli jej?
podm?nku. Pokud Software z?sk?v?te na z?klad? p?edplatn?ho, kon?? va?e
pr?vo na vlastnictv? a?pou??v?n? Softwaru na konci p?edplacen?ho
obdob?. P?i ukon?en? platnosti t?to Smlouvy nebo p??slu?n?ho
p?edplacen?ho obdob? mus?te zni?it origin?l a?v?echny kopie Softwaru,
p??padn? je?vr?tit spole?nosti Novell. Software mus?te tak? odstranit
ze?v?ech sv?ch syst?m?. 
</p><p>
Testov?n? produktu. Toto omezen? testov?n? produktu se v?s t?k?, jen
pokud jste v?voj?? softwaru nebo poskytovatel licence nebo pokud
prov?d?te testov?n? Softwaru podle pokyn? nebo jm?nem v?voj??e nebo
poskytovatele licence. Bez p?edchoz?ho p?semn?ho svolen? spole?nosti
Novell nesm?te publikovat nebo p?edat v?sledky testov?n? Softwaru
dal?? stran?. Pokud jste poskytovatelem licence produkt?, kter? jsou
funk?n? podobn? nebo konkuruj? softwaru (&quot;Podobn? produkty&quot;), nebo
vystupujete jm?nem takov?ho poskytovatele licence a?zve?ejn?te nebo
p?ed?te informace o?testov?n? Softwaru v?rozporu s?t?mto omezen?m,
potom bez ohledu na jak?koli ustanoven? licen?n? smlouvy koncov?ho
u?ivatele Podobn?ho produktu a?krom? dal??ch n?hrad, kter? m??e
spole?nost Novell po?adovat, m? spole?nost Novell pr?vo prov?st
testov?n? produktu na Podobn?ch produktech a?zve?ejnit a?publikovat
tyto informace o?testov?n? produktu a?vy t?mto prohla?ujete, ?e jste
opr?vn?ni toto pr?vo spole?nosti Novell poskytnout. 
</p><p>
Open Source. ??dn? ustanoven? t?to Smlouvy neomezuje ani jinak
neovliv?uje pr?va, povinnosti a podm?nky, je? se na v?s vztahuj? a
kter? mus?te splnit, vypl?vaj?c? z p??padn?ch licenc? pro programov?
k?d open source obsa?en? v?tomto Softwaru.   P?evod. Tato Smlouva
nesm? b?t p?evedena ani postoupena bez p?edchoz?ho p?semn?ho svolen?
spole?nosti Novell. 
</p><p>
Volba pr?va a jurisdikce. Tato Smlouva se???d? z?kony st?tu Utah, USA.
Ve?ker? pr?vn? akty vztahuj?c? se?k?t?to Smlouv? mohou ?e?it pouze
soudy podle p??slu?n? pr?vn? oblasti st?tu Utah. Pokud se v?ak va?e
hlavn? s?dlo nach?z? v zemi, kter? je??lensk?m st?tem Evropsk? unie
nebo Evropsk?ho sdru?en? voln?ho obchodu (EFTA), ??d? se?tato smlouva
z?kony dan? zem? a?ve?ker? pr?vn? akty vztahuj?c? se?ke?Smlouv? mohou
?e?it pouze soudy v p??slu?n? pr?vn? oblasti t?to zem?. 
</p><p>
?plnost smlouvy. Tato Smlouva potvrzuje ?pln? porozum?n? a?shodu mezi
v?mi a?spole?nost? Novell. M??e b?t dopln?na nebo zm?n?na pouze
p?semnou dohodou mezi v?mi a?opr?vn?n?m z?stupcem spole?nosti Novell.
??DN? POSKYTOVATEL LICENCE, DISTRIBUTOR, DEALER, MALOOBCHODN?K,
OBCHODN? Z?STUPCE ANI ZAM?STNANEC NEN? OPR?VN?N TUTO LICENCI UPRAVOVAT
NEBO POSKYTOVAT JAK?KOLI UJI?T?N? ?I Z?VAZKY NEOBSA?EN? NEBO LI??C? SE
OD PODM?NEK T?TO SMLOUVY. 
</p><p>
Z?eknut? se pr?v. ??dn? z?eknut? se jak?hokoliv pr?va nebude platn?,
pokud nebude v?p?semn? form? s podpisem opr?vn?n?ho z?stupce smluvn?
strany. ??dn? z?eknut? se  jak?hokoli d??v?j??ho nebo sou?asn?ho pr?va
vypl?vaj?c?ho z?poru?en? nebo nedodr?en? Smlouvy nebude pova?ov?no za
z?eknut? se?jak?hokoli budouc?ho pr?va plynouc?ho ze?Smlouvy. 
</p><p>
Klauzule o odd?litelnosti. Stane-li se?jak?koli ustanoven? t?to
Smlouvy neplatn?m nebo ne??inn?m, bude toto ustanoven? interpretov?no,
omezeno, upraveno nebo v?p??pad? pot?eby i?zru?eno v?nezbytn?m
rozsahu, aby bylo zabr?n?no neplatnosti nebo ne??innosti Smlouvy.
Ostatn? ustanoven? Smlouvy z?st?vaj? v?platnosti v?p?vodn?m zn?n?. 
</p><p>
Spln?n? exportn?ch po?adavk?. V?robky nebo technick? ?daje poskytnut?
podle t?to Smlouvy mohou b?t p?edm?tem exportn?ch omezen? USA a
obchodn?ch z?kon? jin?ch zem?. Smluvn? strany se zavazuj? dodr?ovat
ve?ker? exportn? omezen? a?z?skat jak?koli licence nebo exportn?
klasifikace pot?ebn? k?exportu, reexportu nebo importu zbo??. Smluvn?
strany se zavazuj? neexportovat ani nereexportovat subjekt?m uveden?m
v?platn?m seznamu subjekt? vylou?en?ch z?exportu, do zem?, na kter? je
uvaleno embargo, ani do teroristick?ch zem? podle exportn?ch z?kon?
USA. Smluvn? strany nepou?ij? zbo?? pro?zak?zan? jadern?, raketov?
nebo chemick? a?biologick? zbran?. Ne? za?nete z USA vyv??et produkty
spole?nosti Novell, informujte se na webov?ch str?nk?ch ??adu Bureau
of Industry and Security (??ad pro pr?mysl a bezpe?nost,
www.bis.doc.gov). Dal?? informace o?exportu softwaru Novell najdete na
adrese http://www.novell.com/company/legal/. Spole?nost Novell v?m na
po??d?n? poskytne konkr?tn? informace o?platn?ch omezen?ch. Spole?nost
Novell v?ak nenese ??dnou odpov?dnost za v?? ne?sp?ch p?i z?sk?v?n?
n?kter?ho nezbytn?ho povolen? pro export. 
</p><p>
Omezen? pr?va pro vl?du USA. Pou??v?n?, kop?rov?n? nebo p?ed?v?n?
informac? vl?dou USA podl?h? omezen?m uveden?m ve sm?rnic?ch FAR
52.227-14 (?erven?1987) obm?na?III (?erven 1987), FAR?52.227-19
(?erven?1987) nebo DFARS?252.227-7013?(b) (3) (listopad?1995),
p??padn? v?p??slu?n?ch n?sledn?ch klauzul?ch. Dodavatel/V?robce je
Novell,?Inc., 1800?South Novell Place, Provo, Utah?84606.  Jin?.
Uplatn?n? Konvence OSN o?kontraktech pro mezin?rodn? prodej zbo?? je
v?slovn? vylou?eno. 
</p><p>
(c)1993, 2000-2009 Novell,?Inc. V?echna pr?va vyhrazena. (030309) 
</p><p>
Novell a?SUSE jsou registrovan? ochrann? zn?mky a?Novell Client je
ochrann? zn?mka spole?nosti Novell, Inc. ve Spojen?ch st?tech
americk?ch a?dal??ch zem?ch. 
</p>
-Eul:
##----------------------------------------
=Pkg: novell-client-script 3.0.0 0.18.20.7 x86_64
=Sum: Novell Client for Linux
+Des:
<!-- DT:Rich -->
<p>The Novell Client for Linux workstation software extends the capabilities of a Linux desktop by providing access to NetWare and Open Enterprise Servers (OES).
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>Novell Client(TM) 2 for SUSE(R) Linux Enterprise 11
Licen?n? smlouva k softwaru Novell(R) 
</p><p>
P?E?T?TE SI POZORN? TUTO SMLOUVU. INSTALAC?, STA?EN?M NEBO JIN?M
POU??V?N?M SOFTWARU VYJAD?UJETE SOUHLAS S?TOUTO SMLOUVOU. POKUD S
T?MITO PODM?NKAMI NESOUHLAS?TE, SOFTWARE NESTAHUJTE, NEINSTALUJTE ANI
NEPOU??VEJTE. JE-LI TO MO?N?, VRA?TE V?TAKOV?M P??PAD? NEPOU?IT?
BALEN? PRODEJCI SPOLU S?DOKLADEM O?KOUPI, A?OBDR??TE N?HRADU. SOFTWARE
NESM? B?T PROD?N, POSTOUPEN ANI D?LE ???EN BEZ SOUHLASU SPOLE?NOSTI
NOVELL. 
</p><p>
Tato licen?n? smlouva k?softwaru Novell (&quot;Smlouva&quot;) je pr?vn? smlouva
mezi v?mi (subjektem nebo osobou) a?spole?nost? Novell,?Inc.
(&quot;Novell&quot;). Softwarov? produkt uveden? v?n?zvu t?to Smlouvy, m?dia a
doprovodn? dokumentace (souhrnn?m ozna?en?m &quot;Software&quot;) jsou chr?n?ny
autorsk?mi pr?vy a??mluvami Spojen?ch st?t? americk?ch (&quot;USA&quot;) a
dal??ch zem? a?vztahuj? se na n? podm?nky t?to Smlouvy. V?echny
aktualizace a podp?rn? verze Softwaru, kter? m??ete st?hnout ?i z?skat
a kter? nejsou doprov?zeny licen?n? smlouvou v?slovn? nahrazuj?c? tuto
Smlouvu, jsou pova?ov?ny za Software a ??d? se touto Smlouvou. Pokud
je Software aktualizac? nebo podp?rnou verz?, mus?te m?t pro instalaci
a?pou??v?n? aktualizace nebo podp?rn? verze platnou licenci k?p?vodn?
verzi a?po?tu u?ivatel? Softwaru.  
</p><p>
Software m??e b?t dod?v?n jako sou??st jin?ch softwarov?ch program?
nebo v?kombinaci s?nimi. Na?tyto jin? softwarov? programy se?mohou
vztahovat jin? licen?n? podm?nky a?mohou b?t licencov?ny jin?m
poskytovatelem licence ne? spole?nost? Novell. Pou?it? jak?chkoli
softwarov?ch program? se?samostatnou licen?n? smlouvou se???d? touto
samostatnou licen?n? smlouvou. Pokud je se Softwarem dod?v?n jak?koli
software jin?ho v?robce, je jeho pou??v?n? z?le?itost? va?? volby.  
</p><p>
U?IT? V R?MCI LICENCE 
</p><p>
Komer?n? software. 
</p><p>
Licencov?n?. Spole?nost Novell v?m poskytuje nev?hradn? a
nep?evoditeln? pr?vo k intern?mu kop?rov?n? a pou??v?n? Softwaru na
z?klad? podm?nek t?to smlouvy. 
</p><p>
Zku?ebn? kopie softwaru. Pokud se jedn? o?verzi Softwaru ur?enou k
vyzkou?en? nebo pokud v?m byl software poskytnut za???elem posouzen?,
je?va?e licence k?u?it? Softwaru omezena pouze na intern? vyzkou?en?
Softwaru v?souladu s?podm?nkami nab?dky k?vyzkou?en?, na?jej?m?
z?klad? jste Software obdr?eli. Platnost t?to licence vypr?? za 90?dn?
od?instalace (p??padn? v?jin? lh?t? ur?en? Softwarem). Po?vypr?en?
platnosti licence m??e Software p?estat fungovat. Po vypr?en? lh?ty k
posouzen? mus?te Software p?estat pou??vat, vr?tit do p?vodn?ho stavu
v?echny Softwarem proveden? akce a zcela ho odstranit ze syst?mu.
Software m??e obsahovat mechanismus automatick?ho zablokov?n?, kter?
zabra?uje jeho pou??v?n? po?uplynut? ur?it? lh?ty. M?li byste proto
prov?st z?lohu syst?mu a?p?ijmout dal?? opat?en? proti ztr?t?m soubor?
nebo dat.  
</p><p>
OMEZEN? 
</p><p>
Licen?n? omezen?. Spole?nost Novell si?vyhrazuje v?echna pr?va, kter?
v?m nebyla v?slovn? poskytnuta. Software je?v?m licencov?n pouze pro
vnit?n? pou?it?. Nesm?te (1)?zp?tn? p?ekl?dat, dekompilovat nebo
analyzovat Software mimo rozsah v?slovn? povolen? p??slu?n?mi z?kony.
(2)?Upravovat, m?nit, pronaj?mat, hostitelsky sd?let nebo p?j?ovat
Software, p??padn? d?le postupovat kter?koli z?va?ich pr?v plynouc?ch
z?t?to Smlouvy nebo (4)?p?ev?d?t Software nebo va?e licen?n? pr?va
plynouc? z?t?to smlouvy, a? ji? vcelku nebo ??ste?n?, bez p?semn?ho
povolen? spole?nosti Novell. 
</p><p>
Licence na sady. Pokud se?licence k?pou??v?n? Softwaru vztahuje na
sadu produkt?, m??e produkty v?sad? pou??vat pod jednou licenc? pouze
jeden u?ivatel. Licence k?sad? neumo??uje pou??v?n? jednotliv?ch
produkt? v sad? v?ce u?ivateli, v?p??pad? licencov?n? na z?klad? po?tu
u?ivatel?, nebo pou??v?n? v?ce za??zen?, v?p??pad? licencov?n? na
z?klad? po?tu za??zen? nebo server?. 
</p><p>
Z?ruka inovace. Pokud jste v?r?mci p??slu?n?ho programu spole?nosti
Novell k?tomuto Softwaru zakoupili z?ruku inovace nebo ?dr?by,
oprav?uje v?s z?ruka inovace nebo ?dr?by pouze k?inovaci Softwaru jako
celku a?neoprav?uje v?s k?inovaci programov?ch sou??st?, produkt?
dod?van?ch spolu se Softwarem ani jednotliv?ch produkt?, kter? jsou
sou??st? sady, je-li Software licencov?n jako sada produkt?. Je-li to
povoleno p??slu?nou politikou a programy spole?nosti Novell, m??ete si
samostatn? zakoupit z?ruku inovace pro jednotliv? sou??sti Softwaru. 
</p><p>
Inovace softwaru. Tato ??st se v?s t?k?, pokud jste zakoupili Software
s?cenou zalo?enou na inovac?ch. Pojem &quot;P?vodn? produkt&quot; ozna?uje
produkt, ze?kter?ho prov?d?te inovaci. Opr?vn?n? pou??vat Software
m?te pouze v?p??pad?, ?e jste opr?vn?n?m u?ivatelem P?vodn?ho produktu
a?spl?ujete n?sleduj?c? podm?nky: (1) Z?skali jste pr?vo pou??t
Software v?hradn? za ??elem nahrazen? P?vodn?ho produktu, kter? jste
z?skali leg?ln? cestou a?kter? byl ur?en k?inovaci Softwarem ve smyslu
politiky spole?nosti Novell uplat?ovan? v?okam?iku, kdy jste Software
z?skali; (2) P?vodn? produkt byl nainstalov?n a?pou??v?n v?souladu s
podm?nkami p??slu?n? licen?n? smlouvy; (3) Neprod?te ani jin?m
zp?sobem nep?evedete vlastnictv? P?vodn?ho produktu. 
</p><p>
Podpora. Spole?nost Novell nen? povinna zaji??ovat podporu Softwaru,
pokud si nezakoup?te nab?dku, kter? slu?by podpory v?slovn? zahrnuje.
Pokud si zakoup?te takov? produkt a na slu?by podpory se nebude
nevztahovat ??dn? samostatn? smlouva, poskytov?n? takov?ch slu?eb
podpory (&quot;Slu?by&quot;) se bude ??dit podm?nkami t?to Smlouvy. Dal??
informace ohledn? aktu?ln? nab?dky podpory spole?nosti Novell m??ete
z?skat na?internetov? adrese http://www.novell.com/support. 
</p><p>
VLASTNICTV?  
</p><p>
Nep?ech?z? na?v?s n?rok na?Software ani na jeho vlastnictv?.
Spole?nost Novell a/nebo jej? poskytovatel? licenc? si ponech?vaj?
ve?ker? pr?va, n?roky a pod?l na du?evn?m vlastnictv? Softwaru a
Slu?eb, v?etn? jak?chkoli ?prav a?jejich kopi?. Z?sk?v?te pouze
podm?n?nou licenci k?pou??v?n? Softwaru. 
</p><p>
OMEZEN? Z?RUKA 
</p><p>
Spole?nost Novell po?dobu devades?ti (90) dn? od?zakoupen? zaru?uje,
?e (1)?m?dia, na?nich? je?Software dod?v?n, neobsahuj? fyzick? vady a
(2)?software bude v?podstatn?ch rysech odpov?dat doprovodn?
dokumentaci. Pokud b?hem devades?ti (90) dn? od?zakoupen? Softwaru
vr?t?te spole?nosti Novell vadn? m?dia nebo pokud ve?stejn? dob?
ozn?m?te nesoulad s parametry, spole?nost Novell v?hradn? dle
vlastn?ho uv??en? tento nesoulad vy?e?? nebo v?m vr?t? licen?n?
poplatky zaplacen? za?Software. Jak?koli neopr?vn?n? pou?it? nebo
?pravy Softwaru ru?? platnost t?to z?ruky. P?EDCHOZ? Z?RUKA
P?EDSTAVUJE JEDIN? MO?N? A?V?HRADN? N?PRAVN? KROK A?NAHRAZUJE VE?KER?
DAL?? Z?RUKY, A? JI? V?SLOVN? ?I?VYPL?VAJ?C?. (P?edchoz? z?ruka se
nevztahuje na?Software poskytovan? zdarma. TAKOV? SOFTWARE SE
POSKYTUJE &quot;TAK JAK JE&quot;, BEZ JAK?KOLI Z?RUKY.) 
</p><p>
Slu?by. Spole?nost Novell zaru?uje, ?e jak?koli zakoupen? slu?by budou
poskytnuty profesion?ln?m zp?sobem v souladu s obecn? p?ij?man?mi
standardy v oboru. Tato z?ruka bude platit po dobu 90 dn? od doru?en?
Slu?eb. P?i jak?mkoli poru?en? t?to z?ruky se spole?nost Novell
zavazuje, bu? napravit tyto slu?by tak, aby vyhov?ly t?to z?ruce nebo
podle sv?ho uv??en? nahradit ??stku, kterou jste spole?nosti Novell
zaplatili za ??st slu?eb, kter? t?to z?ruce nevyhovuj?. Proto?e
soubory mohou b?t v pr?b?hu poskytov?n? technick?ch slu?eb spole?nost?
Novell m?n?ny nebo po?kozeny, souhlas?te, ?e p?ijmete p?im??en?
opat?en? k izolov?n? a z?lohov?n? va?ich syst?m?. 
</p><p>
TENTO SOFTWARE NEN? NAVR?EN, VYTV??EN ANI UR?EN K?POU?IT? NEBO
DISTRIBUCI S?ONLINE ??DIC?M VYBAVEN?M PRO?NEBEZPE?N? PROST?ED?
VY?ADUJ?C? BEZCHYBN? PROVOZ, JAKO JSOU PROVOZY S?NUKLE?RN?MI
ZA??ZEN?MI, ??ZEN? LETECK?HO PROVOZU, KOMUNIKA?N? A?KONTROLN? SYST?MY,
ZA??ZEN? PRO PODPORU D?LE?IT?CH ?IVOTN?CH FUNKC?, ZBRA?OV? SYST?MY ANI
PRO JIN? POU?IT?, U?KTER?CH BY P??PADN? SELH?N? SOFTWARU MOHLO P??MO
V?ST K??MRT?, ZRAN?N? NEBO T?K?MU PO?KOZEN? ZDRAV? OSOB, P??PADN? K
PO?KOZEN? ?IVOTN?HO PROST?ED?. 
</p><p>
TENTO SOFTWARE JE?KOMPATIBILN? POUZE S?N?KTER?MI PO??TA?I A?OPERA?N?MI
SYST?MY. NA?SOFTWARE SE NEVZTAHUJE Z?RUKA, JE-LI POU??V?N V
NEKOMPATIBILN?CH SYST?MECH. Chcete-li z?skat informace t?kaj?c? se
kompatibility Softwaru, obra?te se telefonicky na spole?nost Novell
nebo na sv?ho prodejce. 
</p><p>
Produkty jin?ch v?robc?. Software m??e b?t dod?v?n spolu s hardwarem
nebo jin?mi softwarov?mi programy nebo slu?bami licencovan?mi nebo
prod?van?mi jin?mi subjekty ne? spole?nost? Novell. SPOLE?NOST NOVELL
NEPOSKYTUJE Z?RUKU NA PRODUKTY NEBO SLU?BY JIN?CH V?ROBC?. V?ECHNY
TAKOV? PRODUKTY NEBO SLU?BY JSOU POSKYTOV?NY &quot;TAK JAK JSOU&quot;. V?ECHNY
Z?RU?N? OPRAVY PRODUKT? JIN?CH V?ROBC? ZAJI??UJ? POSKYTOVATEL? LICENC?
T?CHTO PRODUKT? V?SOULADU S?PLATNOU Z?RUKOU POSKYTOVATELE LICENCE. 
</p><p>
NEN?-LI Z?KONEM STANOVENO JINAK, SPOLE?NOST NOVELL ODM?T? JAK?KOLI
P?EDPOKL?DAN? Z?RUKY, V?ETN? Z?RUK VZTAHUJ?C?CH SE?K
OBCHODOVATELNOSTI, VHODNOSTI PRO DAN? ??EL, PR?VN?M N?ROK?M NEBO
NEDODR?EN? SMLOUVY. SPOLE?NOST NOVELL NEPOSKYTUJE ??DN? Z?RUKY,
PROHL??EN? ANI Z?VAZKY, KTER? NEJSOU V?SLOVN? UVEDENY V?T?TO OMEZEN?
Z?RUCE. SPOLE?NOST NOVELL NEZARU?UJE, ?E SOFTWARE NEBO SLU?BY SPLN?
VA?E PO?ADAVKY ANI ?E JEJICH PROVOZ BUDE NEP?ERU?OVAN?. N?kter? m?stn?
p??slu?n? soudy neumo??uj? odm?tnut? ur?it?ch z?ruk nebo n?kter?
omezen?, proto je?mo?n?, ?e n?kter? z?v??e uveden?ch omezen? se?na?v?s
nevztahuj?. Omezen? z?ruka v?m d?v? ur?it? pr?va a krom? nich m??ete
m?t i?dal?? pr?va, kter? se li?? v?z?vislosti na st?tu nebo
jurisdikci.  
</p><p>
OMEZEN? ODPOV?DNOSTI 
</p><p>
N?sledn? ztr?ty. SPOLE?NOST NOVELL ANI ??DN? Z?JEJ?CH POSKYTOVATEL?
LICENC?, P?IDRU?EN?CH SPOLE?NOST? NEBO ZAM?STNANC? NENESE ODPOV?DNOST
ZA?JAK?KOLI ZVL??TN?, N?HODN?, N?SLEDN?, NEP??M?, ?MYSLN?, EKONOMICK?
NEBO TRESTN? ?KODY ZP?SOBEN? POU?IT?M SOFTWARU NEBO SLU?EB NEBO
NEMO?NOST? JE POU??T, MIMO JIN? V?ETN? ZTR?TY ZISKU, ?KOD P?I
PODNIK?N? NEBO ZTR?TY DAT, A?TO I?V?P??PAD?, ?E BYLA NA?MO?NOST VZNIKU
TAKOV?CH ?KOD UPOZORN?NA. P??m? ?kody. CELKOV? ODPOV?DNOST SPOLE?NOSTI
NOVELL ZA?P??M? ?KODY NA MAJETKU NEBO OSOBN? ?JMY (A? JI? SE?JEDN? O
JEDEN P??PAD NEBO O??ADU P??PAD?) V???DN?M P??PAD? NEP?ES?HNE
1,25N?SOBEK ??STKY, KTEROU JSTE ZAPLATILI ZA?SOFTWARE NEBO SLU?BY,
KTER? VZNIK N?ROKU ZP?SOBILY (NEBO 50?USD, POKUD JSTE SOFTWARE Z?SKALI
ZDARMA). V??e uveden? vylou?en? a omezen? se?nevztahuj? na?n?roky
souvisej?c? s??mrt?m nebo zran?n?m osob. V?r?mci p?sobnosti soud?,
kter? neumo??uj? vylou?en? nebo omezen? n?hrady ?kody, bude
odpov?dnost spole?nosti Novell omezena nebo vylou?ena v?maxim?ln?m
povolen?m rozsahu. 
</p><p>
V?EOBECN? PODM?NKY 
</p><p>
Doba trv?n?. Tato Smlouva vstupuje v?platnost dnem leg?ln?ho z?sk?n?
Softwaru a?bude automaticky ukon?ena, poru??te-li jakoukoli jej?
podm?nku. Pokud Software z?sk?v?te na z?klad? p?edplatn?ho, kon?? va?e
pr?vo na vlastnictv? a?pou??v?n? Softwaru na konci p?edplacen?ho
obdob?. P?i ukon?en? platnosti t?to Smlouvy nebo p??slu?n?ho
p?edplacen?ho obdob? mus?te zni?it origin?l a?v?echny kopie Softwaru,
p??padn? je?vr?tit spole?nosti Novell. Software mus?te tak? odstranit
ze?v?ech sv?ch syst?m?. 
</p><p>
Testov?n? produktu. Toto omezen? testov?n? produktu se v?s t?k?, jen
pokud jste v?voj?? softwaru nebo poskytovatel licence nebo pokud
prov?d?te testov?n? Softwaru podle pokyn? nebo jm?nem v?voj??e nebo
poskytovatele licence. Bez p?edchoz?ho p?semn?ho svolen? spole?nosti
Novell nesm?te publikovat nebo p?edat v?sledky testov?n? Softwaru
dal?? stran?. Pokud jste poskytovatelem licence produkt?, kter? jsou
funk?n? podobn? nebo konkuruj? softwaru (&quot;Podobn? produkty&quot;), nebo
vystupujete jm?nem takov?ho poskytovatele licence a?zve?ejn?te nebo
p?ed?te informace o?testov?n? Softwaru v?rozporu s?t?mto omezen?m,
potom bez ohledu na jak?koli ustanoven? licen?n? smlouvy koncov?ho
u?ivatele Podobn?ho produktu a?krom? dal??ch n?hrad, kter? m??e
spole?nost Novell po?adovat, m? spole?nost Novell pr?vo prov?st
testov?n? produktu na Podobn?ch produktech a?zve?ejnit a?publikovat
tyto informace o?testov?n? produktu a?vy t?mto prohla?ujete, ?e jste
opr?vn?ni toto pr?vo spole?nosti Novell poskytnout. 
</p><p>
Open Source. ??dn? ustanoven? t?to Smlouvy neomezuje ani jinak
neovliv?uje pr?va, povinnosti a podm?nky, je? se na v?s vztahuj? a
kter? mus?te splnit, vypl?vaj?c? z p??padn?ch licenc? pro programov?
k?d open source obsa?en? v?tomto Softwaru.   P?evod. Tato Smlouva
nesm? b?t p?evedena ani postoupena bez p?edchoz?ho p?semn?ho svolen?
spole?nosti Novell. 
</p><p>
Volba pr?va a jurisdikce. Tato Smlouva se???d? z?kony st?tu Utah, USA.
Ve?ker? pr?vn? akty vztahuj?c? se?k?t?to Smlouv? mohou ?e?it pouze
soudy podle p??slu?n? pr?vn? oblasti st?tu Utah. Pokud se v?ak va?e
hlavn? s?dlo nach?z? v zemi, kter? je??lensk?m st?tem Evropsk? unie
nebo Evropsk?ho sdru?en? voln?ho obchodu (EFTA), ??d? se?tato smlouva
z?kony dan? zem? a?ve?ker? pr?vn? akty vztahuj?c? se?ke?Smlouv? mohou
?e?it pouze soudy v p??slu?n? pr?vn? oblasti t?to zem?. 
</p><p>
?plnost smlouvy. Tato Smlouva potvrzuje ?pln? porozum?n? a?shodu mezi
v?mi a?spole?nost? Novell. M??e b?t dopln?na nebo zm?n?na pouze
p?semnou dohodou mezi v?mi a?opr?vn?n?m z?stupcem spole?nosti Novell.
??DN? POSKYTOVATEL LICENCE, DISTRIBUTOR, DEALER, MALOOBCHODN?K,
OBCHODN? Z?STUPCE ANI ZAM?STNANEC NEN? OPR?VN?N TUTO LICENCI UPRAVOVAT
NEBO POSKYTOVAT JAK?KOLI UJI?T?N? ?I Z?VAZKY NEOBSA?EN? NEBO LI??C? SE
OD PODM?NEK T?TO SMLOUVY. 
</p><p>
Z?eknut? se pr?v. ??dn? z?eknut? se jak?hokoliv pr?va nebude platn?,
pokud nebude v?p?semn? form? s podpisem opr?vn?n?ho z?stupce smluvn?
strany. ??dn? z?eknut? se  jak?hokoli d??v?j??ho nebo sou?asn?ho pr?va
vypl?vaj?c?ho z?poru?en? nebo nedodr?en? Smlouvy nebude pova?ov?no za
z?eknut? se?jak?hokoli budouc?ho pr?va plynouc?ho ze?Smlouvy. 
</p><p>
Klauzule o odd?litelnosti. Stane-li se?jak?koli ustanoven? t?to
Smlouvy neplatn?m nebo ne??inn?m, bude toto ustanoven? interpretov?no,
omezeno, upraveno nebo v?p??pad? pot?eby i?zru?eno v?nezbytn?m
rozsahu, aby bylo zabr?n?no neplatnosti nebo ne??innosti Smlouvy.
Ostatn? ustanoven? Smlouvy z?st?vaj? v?platnosti v?p?vodn?m zn?n?. 
</p><p>
Spln?n? exportn?ch po?adavk?. V?robky nebo technick? ?daje poskytnut?
podle t?to Smlouvy mohou b?t p?edm?tem exportn?ch omezen? USA a
obchodn?ch z?kon? jin?ch zem?. Smluvn? strany se zavazuj? dodr?ovat
ve?ker? exportn? omezen? a?z?skat jak?koli licence nebo exportn?
klasifikace pot?ebn? k?exportu, reexportu nebo importu zbo??. Smluvn?
strany se zavazuj? neexportovat ani nereexportovat subjekt?m uveden?m
v?platn?m seznamu subjekt? vylou?en?ch z?exportu, do zem?, na kter? je
uvaleno embargo, ani do teroristick?ch zem? podle exportn?ch z?kon?
USA. Smluvn? strany nepou?ij? zbo?? pro?zak?zan? jadern?, raketov?
nebo chemick? a?biologick? zbran?. Ne? za?nete z USA vyv??et produkty
spole?nosti Novell, informujte se na webov?ch str?nk?ch ??adu Bureau
of Industry and Security (??ad pro pr?mysl a bezpe?nost,
www.bis.doc.gov). Dal?? informace o?exportu softwaru Novell najdete na
adrese http://www.novell.com/company/legal/. Spole?nost Novell v?m na
po??d?n? poskytne konkr?tn? informace o?platn?ch omezen?ch. Spole?nost
Novell v?ak nenese ??dnou odpov?dnost za v?? ne?sp?ch p?i z?sk?v?n?
n?kter?ho nezbytn?ho povolen? pro export. 
</p><p>
Omezen? pr?va pro vl?du USA. Pou??v?n?, kop?rov?n? nebo p?ed?v?n?
informac? vl?dou USA podl?h? omezen?m uveden?m ve sm?rnic?ch FAR
52.227-14 (?erven?1987) obm?na?III (?erven 1987), FAR?52.227-19
(?erven?1987) nebo DFARS?252.227-7013?(b) (3) (listopad?1995),
p??padn? v?p??slu?n?ch n?sledn?ch klauzul?ch. Dodavatel/V?robce je
Novell,?Inc., 1800?South Novell Place, Provo, Utah?84606.  Jin?.
Uplatn?n? Konvence OSN o?kontraktech pro mezin?rodn? prodej zbo?? je
v?slovn? vylou?eno. 
</p><p>
(c)1993, 2000-2009 Novell,?Inc. V?echna pr?va vyhrazena. (030309) 
</p><p>
Novell a?SUSE jsou registrovan? ochrann? zn?mky a?Novell Client je
ochrann? zn?mka spole?nosti Novell, Inc. ve Spojen?ch st?tech
americk?ch a?dal??ch zem?ch. 
</p>
-Eul:
##----------------------------------------
=Pkg: novell-filesystem 0.0.1 0.2.38 x86_64
=Sum: Novell Standard Directory Layout
+Des:
<!-- DT:Rich -->
<p>Tento balíček nainstaluje základní adresářovou strukturu.
Primárně pro Novell Open Enterprise Server.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ifolder-client-plugins 3.8.0.10050.1 0.3.45 x86_64
=Sum: Plugins adding additional capability to iFolder 3 client
+Des:
<!-- DT:Rich -->
<p>Plugins for iFolder 3 client
</p>
-Des:
##----------------------------------------
=Pkg: novell-iprint-xclient-sh 6.503.20111114 3.5 x86_64
=Sum: Moduly prohlížeče Mozilla a sdílená knihovna pro iPrint
+Des:
<!-- DT:Rich -->
<p>Novell iPrint is a printing solution that enables you to send documents to
printers located throughout the network.  Using Internet technologies--including
the industry-standard Internet Printing Protocol(IPP)--iPrint provides you with
global access to printers, customizable views of any print environment, flexible
print deployment configurations, and secure printing.
</p>
-Des:
##----------------------------------------
=Pkg: novell-iprint-xclient-sl 6.503.20111114 6.5 x86_64
=Sum: Moduly prohlížeče Mozilla a sdílená knihovna pro iPrint
+Des:
<!-- DT:Rich -->
<p>Novell iPrint is a printing solution that enables you to send documents to
printers located throughout the network.  Using Internet technologies--including
the industry-standard Internet Printing Protocol(IPP)--iPrint provides you with
global access to printers, customizable views of any print environment, flexible
print deployment configurations, and secure printing.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ipsec-tools 0.7.1 2.29.1 x86_64
=Sum: IPsec Utilities with turnpike plugin enabled
+Des:
<!-- DT:Rich -->
<p>This is the patched IPsec-Tools package, that contains patches for the plugin framework to make vendor plugins make use of these tools to provide IPSec based solutions like VPN client.
</p><p>
This package is needed to make use of the IPsec functionality in the version 2.5 and 2.6 Linux kernels. This package builds:
<ul>
<li>libipsec, a PFKeyV2 library
</li><li>setkey, a program to directly manipulate policies and SAs
</li><li>racoon, an IKEv1 keying daemon
</li></ul>
These sources can be found at the IPsec-Tools home page at: http://ipsec-tools.sourceforge.net/
</p><p>
The source and details about the framework can be found at
http://forge.novell.com/modules/xfmod/project/?turnpike
</p><p>
novell-ipsec-tools is a preview package to be used along with the Novell VPN client. This package will be merged with the main stream ipsec-tools in future.
</p>
-Des:
##----------------------------------------
=Pkg: novell-konqueror-plugin 3.0.0 0.2.70 x86_64
=Sum: Novell Network Konqueror Plugin
+Des:
<!-- DT:Rich -->
<p>Novell Network Konqueror Plugin for the Novell Client
</p>
-Des:
##----------------------------------------
=Pkg: novell-ldapext 0.0.1 32.20 x86_64
=Sum: Novell LDAP Add-Ons
+Des:
<!-- DT:Rich -->
<p>This package contains Novell LDAP extensions, interactive ssl, and SASL
support, which are not present in OpenLDAP package. These are specific to Novell eDirectory.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ldapext-32bit 0.0.1 32.20 x86_64
=Sum: Novell LDAP Add-Ons
+Des:
<!-- DT:Rich -->
<p>This package contains Novell LDAP extensions, interactive ssl, and SASL
support, which are not present in OpenLDAP package. These are specific to Novell eDirectory.
</p>
-Des:
##----------------------------------------
=Pkg: novell-lum 2.2.0.16 92.21.1 x86_64
=Sum: Linux User Management
+Des:
<!-- DT:Rich -->
<p>Linux User Management provides PAM and Name Services Switch \
functionality to LDAP servers based on eDirectory.
</p>
-Des:
##----------------------------------------
=Pkg: novell-nautilus-plugin 3.0.0 0.3.21 x86_64
=Sum: Novell Network Nautilus Plugin
+Des:
<!-- DT:Rich -->
<p>Novell Network Nautilus Plugin for the Novell Client
</p>
-Des:
##----------------------------------------
=Pkg: novell-nmasclient 3.4.0 0.3.1 x86_64
=Sum: NMAS Client
+Des:
<!-- DT:Rich -->
<p>Novell Modular Authentication Service client.
</p>
-Des:
##----------------------------------------
=Pkg: novell-nortelplugins 0.1.4 13.6.62 x86_64
=Sum: IKE moduly používající turnpike s povolenými IPSec-tools
+Des:
<!-- DT:Rich -->
<p>These are plugin packages to be used by turnpike enabled IKE through ipsec-tools
</p>
-Des:
##----------------------------------------
=Pkg: novell-novfsd 3.0.0 0.16.11 x86_64
=Sum: Novell Client for the Linux File System Daemon
+Des:
<!-- DT:Rich -->
<p>The Novell file system daemon for the Novell client for Linux.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Installation of novell-novfsd package will cause the novfsd service to be
started on boot. Use YaST -&gt; &quot;System Services&quot; to customize which services can
be automatically started.
</p>
-Ins:
##----------------------------------------
=Pkg: novell-qtgui 3.0.0 0.16.3 x86_64
=Sum: Novell Client graphical user interface
+Des:
<!-- DT:Rich -->
<p>Set of QT GUI modules for Novell Client for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: novell-qtgui-cli 3.0.0 0.16.3 x86_64
=Sum: Novell Client graphical user interface
+Des:
<!-- DT:Rich -->
<p>Set of QT GUI modules for Novell Client for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ui-base 3.0.0 0.8.2 x86_64
=Sum: Runtime libraries for Novell Client for Linux (NCL) GUI and CUI
+Des:
<!-- DT:Rich -->
<p>Set of QT GUI modules for Novell Client for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: novell-xplatlib 1.0.4 0.2.27 x86_64
=Sum: Novell XPLAT Libraries
+Des:
<!-- DT:Rich -->
<p>Novell Cross Platform (XPLAT) libraries.
</p>
-Des:
##----------------------------------------
=Pkg: novell-xtier-base 3.1.8 0.10.14 x86_64
=Sum: Novell Xtier Base
+Des:
<!-- DT:Rich -->
<p>This package contains the runtime libraries for Novell XTier Base.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Installation of novell-xtier-base package will cause the novell-xregd service
to be started on boot. Use YaST -&gt; &quot;System Services&quot; to customize which
services can be automatically started.
</p>
-Ins:
##----------------------------------------
=Pkg: novell-xtier-core 3.1.8 0.10.14 x86_64
=Sum: Novell Xtier Base
+Des:
<!-- DT:Rich -->
<p>This package contains the runtime libraries for Novell XTier Base.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Installation of novell-xtier-base package will cause the novell-xregd service
to be started on boot. Use YaST -&gt; &quot;System Services&quot; to customize which
services can be automatically started.
</p>
-Ins:
##----------------------------------------
=Pkg: novell-xtier-xplat 3.1.8 0.10.14 x86_64
=Sum: Novell Xtier Base
+Des:
<!-- DT:Rich -->
<p>This package contains the runtime libraries for Novell XTier Base.
</p>
-Des:
##----------------------------------------
=Pkg: novfs-kmp-default 1_3.0.13_0.27 0.17.15 x86_64
=Sum: novfs kmp
##----------------------------------------
=Pkg: novfs-kmp-trace 1_3.0.13_0.27 0.17.15 x86_64
=Sum: novfs kmp
##----------------------------------------
=Pkg: novfs-kmp-xen 1_3.0.13_0.27 0.17.15 x86_64
=Sum: novfs kmp
##----------------------------------------
=Pkg: nscd 2.11.3 17.31.1 x86_64
=Sum: Name Service Caching Daemon
+Des:
<!-- DT:Rich -->
<p>Nscd ukládá zjištěná doménová jména a dramaticky zvyšuje výkon
při používání NIS, NIS+ a LDAP.
</p>
-Des:
##----------------------------------------
=Pkg: nspluginwrapper 1.4.4.0.15 0.24.1 x86_64
=Sum: Compatibility Layer for Netscape 4 Plug-Ins
+Des:
<!-- DT:Rich -->
<p>nspluginwrapper is an Open Source compatibility plugin for Netscape 4 (NPAPI) plugins. It enables you to use plugins on platforms they were not built for. For example, you can use the plugins compiled for i386 in Mozilla on Linux/x86_64 or other architectures.
This package consists of:
<ul>
<li>npviewer: the plug-in viewer

</li><li>npwrapper.so: the browser-side plug-in

</li><li>nspluginwrapper: a tool to manage plug-ins installation and update
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: nss-mdns 0.10 39.22 x86_64
=Sum: Host Name Resolution Via Multicast DNS (Zeroconf) for glibc
+Des:
<!-- DT:Rich -->
<p>nss-mdns is a plug-in for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing a hostname resolution via Multicast DNS (aka Zeroconf, aka Apple Rendezvous, aka Apple Bonjour), and effectively allowing name resolution by common Unix/Linux programs in the ad-hoc mDNS domain .local.
</p><p>
nss-mdns provides only client functionality, which means that you have to run a mDNS responder daemon seperately from nss-mdns if you want to register the local hostname via mDNS. I recommend Avahi.
</p><p>
By default, nss-mdns tries to contact a running avahi-daemon to resolve hostnames and addresses and makes use of its superior record cacheing.
</p>
-Des:
##----------------------------------------
=Pkg: nss-mdns-32bit 0.10 39.22 x86_64
=Sum: Host Name Resolution Via Multicast DNS (Zeroconf) for glibc
+Des:
<!-- DT:Rich -->
<p>nss-mdns is a plug-in for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing a hostname resolution via Multicast DNS (aka Zeroconf, aka Apple Rendezvous, aka Apple Bonjour), and effectively allowing name resolution by common Unix/Linux programs in the ad-hoc mDNS domain .local.
</p><p>
nss-mdns provides only client functionality, which means that you have to run a mDNS responder daemon seperately from nss-mdns if you want to register the local hostname via mDNS. I recommend Avahi.
</p><p>
By default, nss-mdns tries to contact a running avahi-daemon to resolve hostnames and addresses and makes use of its superior record cacheing.
</p>
-Des:
##----------------------------------------
=Pkg: nss_ldap 262 11.32.31.1 x86_64
=Sum: NSS LDAP modul
+Des:
<!-- DT:Rich -->
<p>Nss_ldap je NSS modul pro glibc, který umožňuje, aby byly X.500 a LDAP
adresářové servery používány jako primární zdroj pro databáze aliases,
ethers, groups, hosts, networks, protocol, services,  RPC, uživatelů a
hesel shadow (používaných místo nebo současně s obyčejnými soubory
nebo NIS).
</p>
-Des:
##----------------------------------------
=Pkg: nss_ldap-32bit 262 11.32.31.1 x86_64
=Sum: NSS LDAP modul
+Des:
<!-- DT:Rich -->
<p>Nss_ldap je NSS modul pro glibc, který umožňuje, aby byly X.500 a LDAP
adresářové servery používány jako primární zdroj pro databáze aliases,
ethers, groups, hosts, networks, protocol, services,  RPC, uživatelů a
hesel shadow (používaných místo nebo současně s obyčejnými soubory
nebo NIS).
</p>
-Des:
##----------------------------------------
=Pkg: ntfs-3g 2011.4.12 0.7.8 x86_64
=Sum: Linux NTFS-3G userspace filesystem with full write support
+Des:
<!-- DT:Rich -->
<p>NTFS-3G allows for read/write access to NTFS partitions which can be shared with Windows XP, Windows Server 2003, Windows 2000 and Windows Vista.
</p><p>
Limitations:
<ul>
<li>No support for journaling. As a result, if the journal is dirty, NTFS-3g has to refuse read-write mounts.
</li><li>No support for reading/writing compressed and encrypted files
</li><li>Only static permissions, set at mount time
</li></ul>
Notes:
<ul>
<li>Implemented in user space though <a href="pkg://fuse">fuse</a>. It is possible to balance performance using normal processor and I/O priorities of the ntfs-3g processes.
</li><li>NTFS-3g can detect if the filesystem to be mounted has been in use by Windows when it hibernated and refuses read-write mount to prevent data corruption as a result of Windows resuming with a changed filesystem underneath.
</li></ul>
Evaluating access permissions and file ownership is handled like in the Linux FAT and other free Linux NTFS drivers: The access rights for all files on the mounted partition can be set when mounting the filesystem and are the same for all files. Requests to change access rights are silently ignored.
</p><p>
Through the ntfs-3g web site, a version of ntfs-3g with permission handling (which should be usable but is not released officially) can be found.
</p><p>
Compared to vanilla ntfs-3g, this version changes the default locale fallback
(when no working locale is defined) from hiding and rejecting all non-ASCII path names to displaying and expecting UTF-8 encoding in path names.
</p>
-Des:
##----------------------------------------
=Pkg: ntfsprogs 2011.4.12 0.7.8 x86_64
=Sum: Nástroje a knihovny pro souborový systém NTFS
+Des:
<!-- DT:Rich -->
<p>Linux-NTFS projekt (http://linux-ntfs.sf.net/) si dává za cíl vytvořit
linuxovou podporu pro souborý systém NTFS.
Balíček obsahuje několik statickou knihovnu  a několik programů jako
mkntfs, ntfscat, ntfsresize, ntfsls a ntfsundelete (kompletní seznam najdete
po instalaci v man 8 ntfsprogs).
</p>
-Des:
##----------------------------------------
=Pkg: ntp 4.2.4p8 1.16.1 x86_64
=Sum: Démon pro Network Time Protocol (verze 4)
+Des:
<!-- DT:Rich -->
<p>Network Time Protocol (NTP) se používá pro synchronizaci času
klientského počítače nebo serveru s jiným serverem nebo zdrojem
referenčního času, jako je rozhlasový nebo družicový přijímač nebo
modem.
</p><p>
Ntpd je démon operačního systému, který nastavuje a udržuje systémový
denní čas v synchronizaci s internetovými standardními časovými servery.
</p>
-Des:
##----------------------------------------
=Pkg: ntp-doc 4.2.4p8 1.16.1 x86_64
=Sum: Additional Package Documentation for ntp
+Des:
<!-- DT:Rich -->
<p>Kompletní dokumentace o kompilaci a nastavení NTP serveru
nebo klienta. Dokumentace je v HTML formátu pro webové prohlížeče
a obsahuje odkazy na další webové stránky.
</p><p>
What about NTP?
Porozumnění a používání protokolu NTP (Network Time Protocol)
(nejdřív prostudujte netechnická Mini HOWTO a FAQ).
Udržují Ulrich Windl a David Dalton.
</p>
-Des:
##----------------------------------------
=Pkg: numactl 2.0.7 0.7.27 x86_64
=Sum: NUMA Policy Control
+Des:
<!-- DT:Rich -->
<p>Nastavení NUMA pravidel pro jednotlivé procesy.
Nabízí libnuma pro NUMA pravidla v aplikacích.
</p>
-Des:
##----------------------------------------
=Pkg: numlockx 1.1 34.17 x86_64
=Sum: Vypnout/zapnout nebo přepnout NumLock
+Des:
<!-- DT:Rich -->
<p>This little thingy allows you to start X with NumLock turned on ( which is
a feature that a lot of people seem to miss and nobody really knew how to
achieve this ).
This code relies on X extensions called XTest and XKB, so you need to have
at least one of these X extensions installed ( you most probably do ).
</p>
-Des:
##----------------------------------------
=Pkg: obex-data-server 0.4.1 1.28.1 x86_64
=Sum: Obex DBus API
+Des:
<!-- DT:Rich -->
<p>Obex-Data-Server provides a obex dbus api.
Used for bluetooth applications to transfer and receive data.
</p>
-Des:
##----------------------------------------
=Pkg: obexd 0.18 0.7.1 x86_64
=Sum: D-Bus service for Obex Client access
+Des:
<!-- DT:Rich -->
<p>obexd contains obex-client, a D-Bus service to allow sending files
using the Obex Push protocol, common on mobile phones and
other Bluetooth-equipped devices.
</p>
-Des:
##----------------------------------------
=Pkg: obexftp 0.22 37.22 x86_64
=Sum: ObexFTP Implements the Object Exchange (OBEX) Protocol's File Transfer Feature
+Des:
<!-- DT:Rich -->
<p>ObexFTP works with all protocols supported by
<a href="pkg://openobex"> OpenOBEX</a>.
Currently, these are:<ul>
<li><a href="pkg://irda"> IrDA</a>,
</li><li>bluez-utils
</li><li><a href="pkg://setserial"> Serial</a>
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: okteta 4.3.5 0.1.63 x86_64
=Sum: Hex Editor
+Des:
<!-- DT:Rich -->
<p>Okteta is a hex editor for the KDE desktop.
</p>
-Des:
##----------------------------------------
=Pkg: okular 4.3.5 0.2.1 x86_64
=Sum: Document Viewer
+Des:
<!-- DT:Rich -->
<p>Document viewing program; supports document in various formats
</p>
-Des:
##----------------------------------------
=Pkg: opal 3.4.2 2.33 x86_64
=Sum: OPAL (Open Phone Abstraction Library)
+Des:
<!-- DT:Rich -->
<p>Open Phone Abstraction Library, implementation of the ITU H.323
teleconferencing protocol, and successor of the openh323 library.
It supports the H.323 protocol as well as SIP and IAX2.
</p>
-Des:
##----------------------------------------
=Pkg: open-iscsi 2.0.872 0.35.1 x86_64
=Sum: Linux* Open-iSCSI Software Initiator
+Des:
<!-- DT:Rich -->
<p>Open-iSCSI is a high-performance, transport independent,
multi-platform implementation of RFC3720 iSCSI.
</p><p>
Open-iSCSI is partitioned into user and kernel parts.
</p><p>
The kernel portion of Open-iSCSI is a from-scratch code
licensed under GPL. The kernel part implements iSCSI data path
(that is, iSCSI Read and iSCSI Write), and consists of two
loadable modules: iscsi_if.ko and iscsi_tcp.ko.
</p><p>
User space contains the entire control plane: configuration
manager, iSCSI Discovery, Login and Logout processing,
connection-level error processing, Nop-In and Nop-Out handling,
and (in the future:) Text processing, iSNS, SLP, Radius, etc.
</p><p>
The user space Open-iSCSI consists of a daemon process called
iscsid, and a management utility iscsiadm.
</p>
-Des:
##----------------------------------------
=Pkg: openchange 0.9 0.2.37 x86_64
=Sum: Open Source Exchange Server Alternative Native Outlook Compatibility
+Des:
<!-- DT:Rich -->
<p>OpenChange aims to provide a portable Open Source implementation of Microsoft Exchange Server and Exchange protocols. Exchange is a groupware server designed to work with Microsoft Outlook, and providing features such as a messaging server, shared calendars, contact databases, public folders, notes and tasks.
</p><p>
OpenChange provides the MAPI library which can be used by third party messaging clients such as GNOME Evolution or Mozilla Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: openct 0.6.15 5.20 x86_64
=Sum: OpenCT Tools for Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. OpenCT is used by the OpenSC Smart Card library.
</p><p>
For a list of supported readers, please read documentation in /usr/share/doc/packages/openct/wiki/index.html - some readers may be supported only with particular firmware or particular connection type.
</p><p>
There are other packages that may support your reader in a different way. Name of all these packages starts with &quot;pcsc-&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: openjade 1.3.2 295.16 x86_64
=Sum: DSSSL engine pro SGML dokumenty
+Des:
<!-- DT:Rich -->
<p>OpenJade, the follow-up to Jade by James Clark, is an
implementation of the ISO/IEC 10179:1996 standard DSSSL (Document Style, Semantics, and Specification Language); pronounce it &quot;dissl&quot;--it rhymes with whistle.
</p><p>
It has back-ends for SGML, RTF, MIF, TeX, and HTML.
</p><p>
The parser, &quot;nsgmls,&quot; and helper tools like &quot;sgmlnorm,&quot; &quot;spam,&quot;
&quot;spent,&quot; and &quot;sx&quot; are now included in the separate &quot;opensp&quot; package.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-client 2.4.26 0.12.1 x86_64
=Sum: OpenLDAP Client Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenLDAP client utilities.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-libs 2.3.1 3.13 x86_64
=Sum: Běhové knihovny pro Open Motif
+Des:
<!-- DT:Rich -->
<p>Běhové prostředí Open Motif. Obsahuje sdílené knihovny pro Motif.
Open Motif je volně dostupná verze dobře známého uživatelského
rozhraní a toolkitu Motif pro Open Source operační systémy. Tento
balíček byl vytvořen ze zdrojových kódů od firmy Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-libs-32bit 2.3.1 3.13 x86_64
=Sum: Běhové knihovny pro Open Motif
+Des:
<!-- DT:Rich -->
<p>Běhové prostředí Open Motif. Obsahuje sdílené knihovny pro Motif.
Open Motif je volně dostupná verze dobře známého uživatelského
rozhraní a toolkitu Motif pro Open Source operační systémy. Tento
balíček byl vytvořen ze zdrojových kódů od firmy Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif22-libs 2.2.4 138.18.1 x86_64
=Sum: Knihovny Open Motif 2.2.4
+Des:
<!-- DT:Rich -->
<p>This is the old version 2.2.4 Open Motif runtime environment.  It includes the Motif version 2.2.4 shared libraries.
</p><p>
Open Motif is a freely available version of the well-known Motif user interface toolkit for open source operating systems.  This package was built with the Metro Link sources.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif22-libs-32bit 2.2.4 138.18.1 x86_64
=Sum: Knihovny Open Motif 2.2.4
+Des:
<!-- DT:Rich -->
<p>This is the old version 2.2.4 Open Motif runtime environment.  It includes the Motif version 2.2.4 shared libraries.
</p><p>
Open Motif is a freely available version of the well-known Motif user interface toolkit for open source operating systems.  This package was built with the Metro Link sources.
</p>
-Des:
##----------------------------------------
=Pkg: openobex 1.3 157.21 x86_64
=Sum: Otevřená implementace Object Exchange (OBEX) protokolu
+Des:
<!-- DT:Rich -->
<p>OBEX je session protokol nejlépe popsatelný jako binární HTTP protokol. Je optimalizovaný pro ad-hoc bezdrátové spojení a může být používán pro výměnu všech objektů jako soubory, obrázky, položky kalendáře (vCal) a navštívenky (vCard).
</p>
-Des:
##----------------------------------------
=Pkg: opensc 0.11.6 5.27.1 x86_64
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. It mainly focuses on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API. Applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p><p>
Before purchasing any cards, please read carefully documentation in /usr/share/doc/packages/opensc/wiki/index.html - only some cards are supported. Not only card type matters, but also card version, card OS version and preloaded applet. Only subset of possible operations may be supported for your card. Card initialization may require third party proprietary software.
</p>
-Des:
##----------------------------------------
=Pkg: opensc-32bit 0.11.6 5.27.1 x86_64
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. It mainly focuses on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API. Applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p><p>
Before purchasing any cards, please read carefully documentation in /usr/share/doc/packages/opensc/wiki/index.html - only some cards are supported. Not only card type matters, but also card version, card OS version and preloaded applet. Only subset of possible operations may be supported for your card. Card initialization may require third party proprietary software.
</p>
-Des:
##----------------------------------------
=Pkg: openslp 1.2.0 172.22.1 x86_64
=Sum: OpenSLP implementace Service Location protokolu V2
+Des:
<!-- DT:Rich -->
<p>SLP (Service Location Protocol) je IETF standardní framework pro zjišťování
běžících služeb, jejich umístění a nastavení v sítích v korporátním prostředí.
</p><p>
OpenSLP je svobodná implementace protokolu SLPv2 definovaného v RFC 2608
a RFC 2614. Balíček obsahuje démona, knihovny, hlavičkové soubory a dokumentaci.
</p>
-Des:
##----------------------------------------
=Pkg: openslp-32bit 1.2.0 172.22.1 x86_64
=Sum: OpenSLP implementace Service Location protokolu V2
+Des:
<!-- DT:Rich -->
<p>SLP (Service Location Protocol) je IETF standardní framework pro zjišťování
běžících služeb, jejich umístění a nastavení v sítích v korporátním prostředí.
</p><p>
OpenSLP je svobodná implementace protokolu SLPv2 definovaného v RFC 2608
a RFC 2614. Balíček obsahuje démona, knihovny, hlavičkové soubory a dokumentaci.
</p>
-Des:
##----------------------------------------
=Pkg: opensp 1.5.2 176.22 x86_64
=Sum: Nástroje pro syntaktickou analýzu SGML a XML od OpenJade Group.
+Des:
<!-- DT:Rich -->
<p>Nástroje z tohoto balíčku jsou schopné pracovat s SGML a XML dokumenty.
</p><p>
Balíček obsahuje lexikální analyzátor &#39;nsgmls&#39; a příbuzné programy
&#39;sgmlnorm,&#39; &#39;spcat,&#39; &#39;spam,&#39; &#39;spent&#39; a &#39;sgml2xml&#39; (dříve známý jako &#39;sx&#39;).
Sgml2xml je užitečný pro převod z SGML do XML, nadcházejícího standardu
pro WWW.
</p><p>
Tento balíček je odnoží James Clark&#39;s SP suite.
</p>
-Des:
##----------------------------------------
=Pkg: openssh 5.1p1 41.51.1 x86_64
=Sum: Secure Shell Client and Server (Remote Login Program)
+Des:
<!-- DT:Rich -->
<p>SSH (Secure Shell) is a program for logging into and executing commands on a remote machine.
It is intended to replace <a href="pkg://rsh"> rlogin and rsh</a> and provides
<a href="pkg://openssl"> secure encrypted communication</a> between two untrusted
hosts over an insecure network.
</p><p>
<a href="pkg://xorg-x11"> X Window System</a> connections and
arbitrary TCP/IP ports can also be forwarded over the
secure channel.
</p>
-Des:
##----------------------------------------
=Pkg: openssh-askpass 5.1p1 41.51.1 x86_64
=Sum: Dialog pro zadávání passphrase pro OpenSSH a X Window System
+Des:
<!-- DT:Rich -->
<p>Ssh (secure shell) je program pro přihlašování na vzdálené počítače a
pro provádění příkazů na vzdálených strojích. Tento balík obsahuje dialog
pro zadávání passphrase v X Window System pro OpenSSH.
</p>
-Des:
##----------------------------------------
=Pkg: openssh-askpass-gnome 5.1p1 41.51.1 x86_64
=Sum: GNOME dialog pro zadávání passphrase pro OpenSSH
+Des:
<!-- DT:Rich -->
<p>SSH (Secure Shell) is a program for logging into a remote
machine and for executing commands on a remote machine.
This package contains a GNOME-based passphrase dialog for OpenSSH.
</p>
-Des:
##----------------------------------------
=Pkg: openssl 0.9.8j 0.26.1 x86_64
=Sum: Secure Sockets a Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>Projekt OpenSSL je společný pokus o vytvoření robustního,
plnohodnotného, komerčně a celosvětově použitelného Open Source
toolkitu implementujícího protokoly Secure Sockets Layer (SSL
v2/v3) a Transport Layer Security (TLS v1) se silným šifrováním.
Projekt je řízen celosvětovou komunitou dobrovolníků, kteří
používají Internet pro komunikaci, plánování a vývoj toolkitu
OpenSSL včetně jeho dokumentace.
</p><p>
</p><p>
Zdroje a licence
</p><p>
</p><p>
OpenSSL je založeno na excelentní knihovně SSLeay, jejímiž autory
jsou Eric A. Young a Tim J. Hudson. Licence toolkitu OpenSSL je ve
stylu licence serveru Apache, což znamená, že jej lze volně
používat pro nekomerční i komerční účely.
</p>
-Des:
##----------------------------------------
=Pkg: openvpn 2.0.9 143.31 x86_64
=Sum: Full-featured SSL VPN solution using a TUN/TAP Interface
+Des:
<!-- DT:Rich -->
<p>OpenVPN is a full-featured SSL VPN solution which can accomodate a wide
range of configurations, including remote access, site-to-site VPNs, WiFi
security, and enterprise-scale remote access solutions with load balancing,
failover, and fine-grained access-controls.
</p><p>
OpenVPN implements OSI layer 2 or 3 secure network extension using the
industry standard SSL/TLS protocol, supports flexible client authentication
methods based on certificates, smart cards, and/or 2-factor authentication,
and allows user or group-specific access control policies using firewall
rules applied to the VPN virtual interface.
</p><p>
OpenVPN runs on: Linux, Windows 2000/XP and higher, OpenBSD, FreeBSD,
NetBSD, Mac OS X, and Solaris.
</p><p>
OpenVPN is not a web application proxy and does not operate through a web
browser.
</p>
-Des:
##----------------------------------------
=Pkg: openwsman-client 2.2.3 0.6.5 x86_64
=Sum: Openwsman Client libraries
+Des:
<!-- DT:Rich -->
<p>Openwsman Client libraries
</p>
-Des:
##----------------------------------------
=Pkg: openwsman-server 2.2.3 0.6.5 x86_64
=Sum: Openwsman Server and service libraries
+Des:
<!-- DT:Rich -->
<p>Openwsman Server and service libraries
</p>
-Des:
##----------------------------------------
=Pkg: openwsman-yast 1.5.9 1.28 x86_64
=Sum: YaST plugin for openwsman-server
+Des:
<!-- DT:Rich -->
<p>This package provides a YaST plugin for wsmand, the WS Management Daemon.
The plugin makes YaST (the ycp layer api) remotely accessible. Combined with rwsman (the openwsman client bindings for Ruby) and Ruby On Rails, one can e.g. easily create a Web interface for YaST.
</p>
-Des:
##----------------------------------------
=Pkg: opt_gnome-compat 0.1 81.11 x86_64
=Sum: Directory Layout for /opt/gnome Compatibility
+Des:
<!-- DT:Rich -->
<p>This package provides as much compatibility as possible for packages installed into the old /opt/gnome prefix. The package installs the /opt/gnome directory structure and configures system and GNOME components to support this prefix.
</p><p>
This package deletes itself, if it does not find any useful files in /opt/gnome. If you want to install this package, you need to have at least one useful file in /opt/gnome or create it just now.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>opt_gnome-compat deletes itself, if it does not find any useful files in /opt/gnome. If you want to install this package, you need to have at least one useful file into /opt/gnome or create it just now.
</p>
-Ins:
##----------------------------------------
=Pkg: orbit2 2.14.17 2.7.8 x86_64
=Sum: Vysoce výkonný CORBA ORB
+Des:
<!-- DT:Rich -->
<p>ORBit je vysoce výkonný CORBA (Common Object Request Broker Architecture)
ORB (Object Request Broker). Umožňuje programů posílání a příjímání zpráv jiných
programů nezávisle na tom, kde se nachází. CORBA je architektura, která zajišťuje
komunikaci mezi programovými objekty nezávisle na programovacím jazyku, ve kterém
jsou programy napsány nebo operačním systému, nad kterým běží.
</p><p>
Pokud chcete spouštět programy pracující s ORBit, musíte nainstalovat tento balíček.
</p>
-Des:
##----------------------------------------
=Pkg: orbit2-32bit 2.14.17 2.7.8 x86_64
=Sum: Vysoce výkonný CORBA ORB
+Des:
<!-- DT:Rich -->
<p>ORBit je vysoce výkonný CORBA (Common Object Request Broker Architecture)
ORB (Object Request Broker). Umožňuje programů posílání a příjímání zpráv jiných
programů nezávisle na tom, kde se nachází. CORBA je architektura, která zajišťuje
komunikaci mezi programovými objekty nezávisle na programovacím jazyku, ve kterém
jsou programy napsány nebo operačním systému, nad kterým běží.
</p><p>
Pokud chcete spouštět programy pracující s ORBit, musíte nainstalovat tento balíček.
</p>
-Des:
##----------------------------------------
=Pkg: orca 2.28.3 0.1.60 x86_64
=Sum: Čtečka textu na obrazovce pro GNOME
+Des:
<!-- DT:Rich -->
<p>Orca is a free, open source, flexible, and extensible screen reader
that provides access to the graphical desktop via user-customizable
combinations of speech, braille, and/or magnification.  Under
development by the Sun Microsystems, Inc., Accessibility Program
Office since 2004, Orca has been created with early input from and
continued engagement with its end users.  In fact, the user interface
designer for Orca is also a user.
</p>
-Des:
##----------------------------------------
=Pkg: orca-lang 2.28.3 0.1.60 x86_64
=Sum: Čtečka textu na obrazovce pro GNOME
+Des:
<!-- DT:Rich -->
<p>Orca is a free, open source, flexible, and extensible screen reader
that provides access to the graphical desktop via user-customizable
combinations of speech, braille, and/or magnification.  Under
development by the Sun Microsystems, Inc., Accessibility Program
Office since 2004, Orca has been created with early input from and
continued engagement with its end users.  In fact, the user interface
designer for Orca is also a user.
</p>
-Des:
##----------------------------------------
=Pkg: ozerocdoff 0.4 1.26.2.1 x86_64
=Sum: Enable the modem ports on Option ZeroCD devices
+Des:
<!-- DT:Rich -->
<p>This tool allows to switch so called &quot;ZeroCD&quot; devices from Option into modem mode, so that they can actually be used as intended.
</p>
-Des:
##----------------------------------------
=Pkg: pam 1.1.5 0.10.17 x86_64
=Sum: A Security Tool that Provides Authentication for Applications
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Autentization Modules) je systémový bezpečnostní nástroj,
který umožňuje správci systému nastavovat autentizační pravidla bez nutnosti
rekompilace programů, které provádějí autentizaci.
</p>
-Des:
##----------------------------------------
=Pkg: pam-32bit 1.1.5 0.10.17 x86_64
=Sum: A Security Tool that Provides Authentication for Applications
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Autentization Modules) je systémový bezpečnostní nástroj,
který umožňuje správci systému nastavovat autentizační pravidla bez nutnosti
rekompilace programů, které provádějí autentizaci.
</p>
-Des:
##----------------------------------------
=Pkg: pam-config 0.79 2.5.58 x86_64
=Sum: Modify common PAM configuration files
+Des:
<!-- DT:Rich -->
<p>pam-config is a command line utility to maintain the common PAM configuration files included by most PAM application configuration files. It can be used to configure a system for different network or hardware based authentication schemes. pam-config can also add/adjust/remove other PAM modules and their options.
</p>
-Des:
##----------------------------------------
=Pkg: pam-doc 1.1.5 0.10.17 x86_64
=Sum: Documentation for Pluggable Authentication Modules
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p><p>
This package contains the documentation.
</p>
-Des:
##----------------------------------------
=Pkg: pam-modules 11 1.22.1 x86_64
=Sum: Další PAM moduly
+Del:
<!-- DT:Rich -->
<p>Pokud odstraníte tento balík, nebude se možno přihlásit do systému!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p><p>
</p><p>
This package contains additional PAM Modules, which are necessary
for a working SuSE Linux System: pam_unix2, pam_pwcheck and
pam_homecheck
</p>
-Des:
##----------------------------------------
=Pkg: pam-modules-32bit 11 1.22.1 x86_64
=Sum: Další PAM moduly
+Del:
<!-- DT:Rich -->
<p>Pokud odstraníte tento balík, nebude se možno přihlásit do systému!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p><p>
</p><p>
This package contains additional PAM Modules, which are necessary
for a working SuSE Linux System: pam_unix2, pam_pwcheck and
pam_homecheck
</p>
-Des:
##----------------------------------------
=Pkg: pam_apparmor 2.5.1.r1445 55.57.47 x86_64
=Sum: PAM module to add AppArmor change_hat functionality to session-aware applications
+Des:
<!-- DT:Rich -->
<p>The pam_apparmor module provides the means for any PAM applications that call pam_open_session() to automatically perform an AppArmor change_hat operation in order to switch to a user-specific security policy.
</p>
-Des:
##----------------------------------------
=Pkg: pam_apparmor-32bit 2.5.1.r1445 55.57.47 x86_64
=Sum: PAM module to add AppArmor change_hat functionality to session-aware applications
+Des:
<!-- DT:Rich -->
<p>The pam_apparmor module provides the means for any PAM applications that call pam_open_session() to automatically perform an AppArmor change_hat operation in order to switch to a user-specific security policy.
</p>
-Des:
##----------------------------------------
=Pkg: pam_csync 0.41.94 1.33 x86_64
=Sum: A PAM module for roaming home directories
+Des:
<!-- DT:Rich -->
<p>This is a PAM module to provide roaming home directories for a user session. The authentication module verifies the identity of a user and triggers a synchronization with the server on the first login and the last logout.
</p>
-Des:
##----------------------------------------
=Pkg: pam_fp 0.1 12.32.1 x86_64
=Sum: PAM module to be used with libfprint
+Des:
<!-- DT:Rich -->
<p>pam_fp is a PAM module for fingerprint reader support to be used with
libfprint. A list of compatible fingerprint readers can be found at
http://reactivated.net/fprint/wiki/Supported_devices .
</p>
-Des:
##----------------------------------------
=Pkg: pam_fp-32bit 0.1 12.32.1 x86_64
=Sum: PAM module to be used with libfprint
+Des:
<!-- DT:Rich -->
<p>pam_fp is a PAM module for fingerprint reader support to be used with
libfprint. A list of compatible fingerprint readers can be found at
http://reactivated.net/fprint/wiki/Supported_devices .
</p>
-Des:
##----------------------------------------
=Pkg: pam_krb5 2.3.1 47.10.15 x86_64
=Sum: PAM modul pro autentizaci na Kerberovi
+Des:
<!-- DT:Rich -->
<p>Tento PAM modul podporuje autentikaci proti Kerberos KDC, a aktualizuje
vaše heslo pro Kerbera.
</p>
-Des:
##----------------------------------------
=Pkg: pam_krb5-32bit 2.3.1 47.10.15 x86_64
=Sum: PAM modul pro autentizaci na Kerberovi
+Des:
<!-- DT:Rich -->
<p>Tento PAM modul podporuje autentikaci proti Kerberos KDC, a aktualizuje
vaše heslo pro Kerbera.
</p>
-Des:
##----------------------------------------
=Pkg: pam_ldap 184 147.20 x86_64
=Sum: PAM modul pro LDAP autentizaci
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje PAM modul, který používá pro autentizaci LDAP.
Mezi jeho výhody patří:
</p><p>
o Podpora pro změnu hesla v LDAP
</p><p>
o Kompatibilita s formátem konfiguračního souboru nss_ldap
</p>
-Des:
##----------------------------------------
=Pkg: pam_ldap-32bit 184 147.20 x86_64
=Sum: PAM modul pro LDAP autentizaci
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje PAM modul, který používá pro autentizaci LDAP.
Mezi jeho výhody patří:
</p><p>
o Podpora pro změnu hesla v LDAP
</p><p>
o Kompatibilita s formátem konfiguračního souboru nss_ldap
</p>
-Des:
##----------------------------------------
=Pkg: pam_mount 0.47 13.13.65 x86_64
=Sum: A PAM Module that can Mount Volumes for a User Session
+Des:
<!-- DT:Rich -->
<p>This module is aimed at environments with SMB (Samba or Windows NT)
or NCP (Netware or Mars-NWE) servers that Unix users wish to access
transparently. It facilitates access to private volumes of these types.
This module also supports mounting home directories using
loopback encrypted filesystems. The module was originally written for
use on the Linux operating system but has since been modified to
work on several flavors of BSD.
</p><p>
o Every user can access their own volumes
</p><p>
o The user only needs to type the password once (at login)
</p><p>
o The mounting process is transparent to the user
</p><p>
o There is no need to keep the login passwords in any additional files
</p><p>
o The volumes are unmounted on logout, so it saves system resources,
avoiding the need to list every possibly useful remote
volume in /etc/fstab or in an automount/supermount config file. This
is also necessary for securing encrypted filesystems.
</p><p>
Pam_mount &quot;understands&quot; SMB, NCP, and any type of filesystem that can
be mounted using the standard mount command. If someone has a
particular need for a different filesystem, feel free to ask me to
include it and send me patches.
</p>
-Des:
##----------------------------------------
=Pkg: pam_mount-32bit 0.47 13.13.65 x86_64
=Sum: A PAM Module that can Mount Volumes for a User Session
+Des:
<!-- DT:Rich -->
<p>This module is aimed at environments with SMB (Samba or Windows NT)
or NCP (Netware or Mars-NWE) servers that Unix users wish to access
transparently. It facilitates access to private volumes of these types.
This module also supports mounting home directories using
loopback encrypted filesystems. The module was originally written for
use on the Linux operating system but has since been modified to
work on several flavors of BSD.
</p><p>
o Every user can access their own volumes
</p><p>
o The user only needs to type the password once (at login)
</p><p>
o The mounting process is transparent to the user
</p><p>
o There is no need to keep the login passwords in any additional files
</p><p>
o The volumes are unmounted on logout, so it saves system resources,
avoiding the need to list every possibly useful remote
volume in /etc/fstab or in an automount/supermount config file. This
is also necessary for securing encrypted filesystems.
</p><p>
Pam_mount &quot;understands&quot; SMB, NCP, and any type of filesystem that can
be mounted using the standard mount command. If someone has a
particular need for a different filesystem, feel free to ask me to
include it and send me patches.
</p>
-Des:
##----------------------------------------
=Pkg: pam_p11 0.1.5 1.15 x86_64
=Sum: PAM Authentication Module for Using Cryptographic Tokens
+Des:
<!-- DT:Rich -->
<p>Pam_p11 is a pluggable authentication module (pam) package for using cryptographic tokens, such as smart cards and usb crypto tokens, for authentication.
</p><p>
Pam_p11 uses libp11 to access any PKCS#11 module. It should be compatible with any implementation, but it is primarily developed using OpenSC.
</p><p>
Pam_p11 implements two authentication modules:
<ul>
<li>pam_p11_openssh authenticates the user using openssh ~/.ssh/authorized_keys file.
</li><li>pam_p11_opensc authenticates the user using certificates found in ~/.eid/authorized_certificates. It is compatible with the older opensc &quot;pam_opensc&quot; authentication module (eid mode).
</li></ul>
Pam_p11 is very simple. It has no configuration file, no other options than the PKCS#11 module file, and does not know about certificate chains, certificate authorities, revocation lists, or OCSP. It is perfect for the small installation with no frills.
</p>
-Des:
##----------------------------------------
=Pkg: pam_p11-32bit 0.1.5 1.15 x86_64
=Sum: PAM Authentication Module for Using Cryptographic Tokens
+Des:
<!-- DT:Rich -->
<p>Pam_p11 is a pluggable authentication module (pam) package for using cryptographic tokens, such as smart cards and usb crypto tokens, for authentication.
</p><p>
Pam_p11 uses libp11 to access any PKCS#11 module. It should be compatible with any implementation, but it is primarily developed using OpenSC.
</p><p>
Pam_p11 implements two authentication modules:
<ul>
<li>pam_p11_openssh authenticates the user using openssh ~/.ssh/authorized_keys file.
</li><li>pam_p11_opensc authenticates the user using certificates found in ~/.eid/authorized_certificates. It is compatible with the older opensc &quot;pam_opensc&quot; authentication module (eid mode).
</li></ul>
Pam_p11 is very simple. It has no configuration file, no other options than the PKCS#11 module file, and does not know about certificate chains, certificate authorities, revocation lists, or OCSP. It is perfect for the small installation with no frills.
</p>
-Des:
##----------------------------------------
=Pkg: pam_pkcs11 0.6.0 139.24 x86_64
=Sum: PKCS #11 PAM Module
+Des:
<!-- DT:Rich -->
<p>This Linux PAM module allows X.509 a certificate-based user authentication.
The certificate and its dedicated private key are thereby accessed by means of an appropriate PKCS #11 module.
For the verification of the users&#39; certificates, locally stored CA
certificates as well as online or locally accessible CRLs are used.
</p><p>
Additionally, the package includes pam_pkcs11-related tools:<ul>
<li>pkcs11_eventmgr: Generates actions on card insert, removal, or time-out events
</li><li>pklogin_finder: Gets the login name that maps to a certificate
</li><li>pkcs11_inspect: Inspects the contents of a certificate
</li><li>make_hash_links: Creates hash link directories for storing CAs and CRLs
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pam_pkcs11-32bit 0.6.0 139.24 x86_64
=Sum: PKCS #11 PAM Module
+Des:
<!-- DT:Rich -->
<p>This Linux PAM module allows X.509 a certificate-based user authentication.
The certificate and its dedicated private key are thereby accessed by means of an appropriate PKCS #11 module.
For the verification of the users&#39; certificates, locally stored CA
certificates as well as online or locally accessible CRLs are used.
</p><p>
Additionally, the package includes pam_pkcs11-related tools:<ul>
<li>pkcs11_eventmgr: Generates actions on card insert, removal, or time-out events
</li><li>pklogin_finder: Gets the login name that maps to a certificate
</li><li>pkcs11_inspect: Inspects the contents of a certificate
</li><li>make_hash_links: Creates hash link directories for storing CAs and CRLs
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pam_radius 1.3.16 178.16 x86_64
=Sum: A PAM Module for User Authentication using a Radius Server
+Des:
<!-- DT:Rich -->
<p>pam_radius je PAM modul, který umožňuje autentifikaci uživatele přes
Radius server.
</p>
-Des:
##----------------------------------------
=Pkg: pam_radius-32bit 1.3.16 178.16 x86_64
=Sum: A PAM Module for User Authentication using a Radius Server
+Des:
<!-- DT:Rich -->
<p>pam_radius je PAM modul, který umožňuje autentifikaci uživatele přes
Radius server.
</p>
-Des:
##----------------------------------------
=Pkg: pam_smb 2.0.0rc6 115.16 x86_64
=Sum: A PAM Module for User Authentication using an NT Server
+Des:
<!-- DT:Rich -->
<p>Module pam_smb is a PAM module which allows authentication of UNIX users using an NT server.
</p>
-Des:
##----------------------------------------
=Pkg: pam_smb-32bit 2.0.0rc6 115.16 x86_64
=Sum: A PAM Module for User Authentication using an NT Server
+Des:
<!-- DT:Rich -->
<p>Module pam_smb is a PAM module which allows authentication of UNIX users using an NT server.
</p>
-Des:
##----------------------------------------
=Pkg: pam_ssh 1.96 26.26.4.1 x86_64
=Sum: PAM Module for SSH Authentication
+Des:
<!-- DT:Rich -->
<p>This module provides single sign-on behavior. The user types a passphrase when
logging in and is allowed in if it decrypts the user s SSH private key.
An ssh-agent is started and keys are added. For the entire session, the user
types no more passwords.
</p>
-Des:
##----------------------------------------
=Pkg: pam_ssh-32bit 1.96 26.26.4.1 x86_64
=Sum: PAM Module for SSH Authentication
+Des:
<!-- DT:Rich -->
<p>This module provides single sign-on behavior. The user types a passphrase when
logging in and is allowed in if it decrypts the user s SSH private key.
An ssh-agent is started and keys are added. For the entire session, the user
types no more passwords.
</p>
-Des:
##----------------------------------------
=Pkg: pan 0.132 118.40 x86_64
=Sum: Výkonný newsreader pro GNOME
+Des:
<!-- DT:Rich -->
<p>PAN je výkonný newsreader. Cílem projektu je vytvořit
uživatelsky přívětivý USENET newsreader.
</p>
-Des:
##----------------------------------------
=Pkg: pan-lang 0.132 118.40 x86_64
=Sum: Výkonný newsreader pro GNOME
+Des:
<!-- DT:Rich -->
<p>PAN je výkonný newsreader. Cílem projektu je vytvořit
uživatelsky přívětivý USENET newsreader.
</p>
-Des:
##----------------------------------------
=Pkg: pango 1.26.2 1.3.1 x86_64
=Sum: Systém pro layout a renderování mezinárodních textů
+Des:
<!-- DT:Rich -->
<p>Pango je knihovna pro renderování a layout textu, kde je velký důraz kladen na internacionalizaci.
Tvoří základ pro zobrazování textu a práci s písmy v GTK+ 2.0
</p>
-Des:
##----------------------------------------
=Pkg: pango-32bit 1.26.2 1.3.1 x86_64
=Sum: Systém pro layout a renderování mezinárodních textů
+Des:
<!-- DT:Rich -->
<p>Pango je knihovna pro renderování a layout textu, kde je velký důraz kladen na internacionalizaci.
Tvoří základ pro zobrazování textu a práci s písmy v GTK+ 2.0
</p>
-Des:
##----------------------------------------
=Pkg: pango-devel 1.26.2 1.3.1 x86_64
=Sum: Include files and libraries mandatory for development
+Des:
<!-- DT:Rich -->
<p>Hlavičkové soubory a knihovny pro vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: paprefs 0.9.9 1.3.79 x86_64
=Sum: PulseAudio Preferences
+Des:
<!-- DT:Rich -->
<p>PulseAudio Preferences (paprefs) is a simple GTK based configuration
dialog for the PulseAudio sound server.
</p><p>
Please note that this program can only configure local servers, and
requires that a special module module-gconf is loaded in the sound
server.
</p>
-Des:
##----------------------------------------
=Pkg: parted 2.3 10.21.18 x86_64
=Sum: GNU program pro úpravu diskových oddílů
+Des:
<!-- DT:Rich -->
<p>GNU Parted je program pro vytváření, mazaní, zvětšování, zmenšování,
kontrolu a kopírování diskových oddílů a přítomných souborových systémů.
</p>
-Des:
##----------------------------------------
=Pkg: parted-32bit 2.3 10.21.18 x86_64
=Sum: GNU program pro úpravu diskových oddílů
+Des:
<!-- DT:Rich -->
<p>GNU Parted je program pro vytváření, mazaní, zvětšování, zmenšování,
kontrolu a kopírování diskových oddílů a přítomných souborových systémů.
</p>
-Des:
##----------------------------------------
=Pkg: patch 2.5.9 252.22.2 x86_64
=Sum: GNU patch
+Des:
<!-- DT:Rich -->
<p>Program GNU <tt>patch</tt> se používá pro aplikaci rozdílových souborů
(generovaných programem <tt>diff</tt>) na originály souborů.
</p>
-Des:
##----------------------------------------
=Pkg: pavucontrol 0.9.10 1.2.78 x86_64
=Sum: PulseAudio Volume Control
+Des:
<!-- DT:Rich -->
<p>PulseAudio Volume Control (pavucontrol) is a simple GTK based volume
control tool (&quot;mixer&quot;) for the PulseAudio sound server. In contrast
to classic mixer tools this one allows you to control both the volume
of hardware devices and of each playback stream separately.
</p>
-Des:
##----------------------------------------
=Pkg: pax 3.4 135.21 x86_64
=Sum: POSIXový program pro archivaci souborů
+Des:
<!-- DT:Rich -->
<p>Pax je archivační nástroj odpovídající standardu POSIX. Podporuje dva
nejčastěji používané typy zálohovacích archívů - CPIO a TAR.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils 3.0.1 2.29.1 x86_64
=Sum: PCI nástroje pro jádro 2.2 a vyšší
+Des:
<!-- DT:Rich -->
<p>Program lspci zobrazuje detailní informace o všech PCI sběrnicích
a zařízeních v počítači; nahrazuje původní rozhraní /proc/pci.
</p><p>
Program setpci umožňuje číst a zapisovat konfigurační registry PCI
zařízení. Můžete s ním například nastavovat časovače latence.
</p><p>
update-pciids - stáhne aktuální verzi programu pci.ids
</p>
-Des:
##----------------------------------------
=Pkg: pciutils-32bit 3.0.1 2.29.1 x86_64
=Sum: PCI nástroje pro jádro 2.2 a vyšší
+Des:
<!-- DT:Rich -->
<p>Program lspci zobrazuje detailní informace o všech PCI sběrnicích
a zařízeních v počítači; nahrazuje původní rozhraní /proc/pci.
</p><p>
Program setpci umožňuje číst a zapisovat konfigurační registry PCI
zařízení. Můžete s ním například nastavovat časovače latence.
</p><p>
update-pciids - stáhne aktuální verzi programu pci.ids
</p>
-Des:
##----------------------------------------
=Pkg: pcmciautils 015 2.23.18 x86_64
=Sum: Nástroje pro PC karty
+Des:
<!-- DT:Rich -->
<p>This package enables the usage of PC-Cards with Linux. It provides hotplug
scripts, and tools that set up sockets and cards. Since kernel 2.6.13 card injection and removal are handled completely via hotplug. Therefore, a daemon like &#39;cardmgr&#39; is no longer needed. Soft ejecting and inserting cards can be done with pccardctl (it was cardctl before). There are also some tools for debugging and CIS handling.
</p>
-Des:
##----------------------------------------
=Pkg: pcre-32bit 7.8 2.18 x86_64
=Sum: Knihovna pro regulární výrazy kompatibilní s Perl
+Des:
<!-- DT:Rich -->
<p>Knihovna PCRE je sada funkcí, které implementují porovnávání řetězců
s regulárními výrazy používajícími stejnou syntaxi a sémantiku jako
Perl 5, s několika málo rozdíly. Aktuální implementace odpovídá
Perlu 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcre 7.8 2.18 x86_64
=Sum: Knihovna pro regulární výrazy kompatibilní s Perl
+Des:
<!-- DT:Rich -->
<p>Knihovna PCRE je sada funkcí, které implementují porovnávání řetězců
s regulárními výrazy používajícími stejnou syntaxi a sémantiku jako
Perl 5, s několika málo rozdíly. Aktuální implementace odpovídá
Perlu 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-acr38 1.7.9 137.24 x86_64
=Sum: PC/SC IFD Handler for the ACR38 Smart Card Reader
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ACR 38 smart card reader produced by ACS.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-asedriveiiie-serial 3.5 2.24 x86_64
=Sum: ASEDrive IIIe Serial Smartcard Reader Driver
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ASEDrive IIIe Serial smart card reader.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-asedriveiiie-usb 3.5 1.24 x86_64
=Sum: ASEDrive IIIe USB Smart Card Reader Driver
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ASEDrive IIIe USB smart card reader.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-asekey 3.4 2.24 x86_64
=Sum: ASEKey USB Token Driver
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ASEKey USB Token.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-ccid 1.3.8 3.15.1 x86_64
=Sum: PCSC Driver for CCID Based Smart Card Readers and GemPC Twin Serial Reader
+Des:
<!-- DT:Rich -->
<p>This package contains a generic USB CCID (Chip/Smart Card Interface Devices) driver.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-cyberjack 3.3.0 3.25 x86_64
=Sum: PC/SC IFD ovladač pro Reiner SCT Cyberjack USB-SmartCard
+Des:
<!-- DT:Rich -->
<p>This package includes the PC/SC IFD handler for the Reiner SCT Cyberjack pinpad/e-com USB chipcard reader.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p><p>
For more information about the reader and software updates see:
</p><p>
http://www.reiner-sct.de/db/reiner-sct.de/html/e-com.html
http://www.reiner-sct.de/db/reiner-sct.de/html/pinpad.html
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-gempc 1.0.3 1.24 x86_64
=Sum: PCSC ovladač pro čtečky Gemplus GemPC 410/430
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the GemPC 410 and GemPC 430 smart card readers produced by Gemplus.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite 1.4.102 1.37.3 x86_64
=Sum: PCS Smart Cards Library
+Des:
<!-- DT:Rich -->
<p>The purpose of PCSC Lite is to provide a Windows(R) SCard interface in a very small form factor for communication with smart cards and readers.
PCSC Lite can be compiled directly for a desired reader driver or can be
used to dynamically allocate/deallocate reader drivers at runtime (the default behavior).
</p><p>
PCSC Lite uses the same winscard API as used in Windows(R).
</p><p>
Security aware people should read the SECURITY file for possible vulnerabilities of pcsclite and how to fix them.
For information on how to install drivers please read the DRIVERS file.
</p><p>
Memory cards will be supported through the MCT specification, which is an APDU like manner sent normally through the SCardTransmit() function.
This functionality is exercised in the driver.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite-32bit 1.4.102 1.37.3 x86_64
=Sum: PCS Smart Cards Library
+Des:
<!-- DT:Rich -->
<p>The purpose of PCSC Lite is to provide a Windows(R) SCard interface in a very small form factor for communication with smart cards and readers.
PCSC Lite can be compiled directly for a desired reader driver or can be
used to dynamically allocate/deallocate reader drivers at runtime (the default behavior).
</p><p>
PCSC Lite uses the same winscard API as used in Windows(R).
</p><p>
Security aware people should read the SECURITY file for possible vulnerabilities of pcsclite and how to fix them.
For information on how to install drivers please read the DRIVERS file.
</p><p>
Memory cards will be supported through the MCT specification, which is an APDU like manner sent normally through the SCardTransmit() function.
This functionality is exercised in the driver.
</p>
-Des:
##----------------------------------------
=Pkg: pdfmod 0.8.1 0.2.29 x86_64
=Sum: PDF Modifier
+Des:
<!-- DT:Rich -->
<p>PDF Mod is a simple tool for modifying your PDFs; moving, removing, extracting, and rotating pages.
</p><p>
Authors:
<hr>
Gabriel Burt &lt;gabriel.burt@gmail.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: pdfmod-lang 0.8.1 0.2.29 x86_64
=Sum: PDF Modifier
+Des:
<!-- DT:Rich -->
<p>PDF Mod is a simple tool for modifying your PDFs; moving, removing, extracting, and rotating pages.
</p><p>
Authors:
<hr>
Gabriel Burt &lt;gabriel.burt@gmail.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: perl-32bit 5.10.0 64.55.1 x86_64
=Sum: Interpret jazyka Perl
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl je optimalizován pro zpracování libovolného textu.
Je užitečný pro mnoho správcovských úloh.
Perl je vyvíjen spíše jako praktický (jednoduše použitelný,
efektivní a úplný) než hezký (malý a elegantní).
</p><p>
Některé moduly dostupné v CPAN najdete v sérii &quot;perl&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: perl 5.10.0 64.55.1 x86_64
=Sum: Interpret jazyka Perl
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl je optimalizován pro zpracování libovolného textu.
Je užitečný pro mnoho správcovských úloh.
Perl je vyvíjen spíše jako praktický (jednoduše použitelný,
efektivní a úplný) než hezký (malý a elegantní).
</p><p>
Některé moduly dostupné v CPAN najdete v sérii &quot;perl&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Archive-Zip 1.24 2.7 x86_64
=Sum: perl-Archive-Zip
+Des:
<!-- DT:Rich -->
<p>Perlový modul pro tvorbu a práci se zazipovanými soubory
</p>
-Des:
##----------------------------------------
=Pkg: perl-Authen-SASL 2.12 1.18.1 x86_64
=Sum: SASL ověřovací systém
+Des:
<!-- DT:Rich -->
<p>SASL je generický mechanizmus ověřování používaný v řadě síťových
protokolů. Authen::SASL poskytuje implementaci řešení, které umožňuje
sdílení všem protokolům.
</p><p>
Toto řešení umožňuje připojení různých implementací tříd připojení.
</p>
-Des:
##----------------------------------------
=Pkg: perl-BerkeleyDB 0.35 2.21 x86_64
=Sum: Perl Module for Accessing Berkeley DB Functions
+Des:
<!-- DT:Rich -->
<p>BerkeleyDB is a module that allows Perl programs to use the facilities provided by Berkeley DB version 2 or higher.
To use version 1 of Berkeley DB with Perl, you need the DB_File module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Bootloader 0.4.89.37 0.6.1 x86_64
=Sum: Knihovna pro nastavení zavaděčů
+Des:
<!-- DT:Rich -->
<p>Perl modules for configuring various boot loaders.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-Crontab 1.21 73.21 x86_64
=Sum: Vixie kompatibilní crontab soubory pro čtení a zápis
+Des:
<!-- DT:Rich -->
<p>Config::Crontab  čte a zapisuje crontab(5) soubory. Je kompatibilní s crontab
Vixie stylu (a všemi podskupinami včetně crontabu stylu Solaris SysV).
</p><p>
Má jednoduchou objektovou syntaxi. Crontab soubory jsou rozděleny do &quot;bloků&quot;
(odstavců oddělených jednou nebo více prázdnými řádkami). Blok je základní
jednotkou Config::Crontab objektu.
</p><p>
Více informací najdete v manuálové stránce Config::Crontab.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-ASN1 0.22 1.22 x86_64
=Sum: Convert::ASN1
+Des:
<!-- DT:Rich -->
<p>Konvertuje mezi strukturami perlovských dat a ASN1 kódovanými pakety.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-BinHex 1.119 14.2.1 x86_64
=Sum: Moduly pro zpracování (a vytváření!) MIME entit
+Des:
<!-- DT:Rich -->
<p>Moduly pro zpracování (a vytváření!) MIME entit
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-TNEF 0.17 263.15 x86_64
=Sum: Perlový modul pro čtení souborů TNEF
+Des:
<!-- DT:Rich -->
<p>Perlový modul pro čtení souborů TNEF
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-UUlib 1.051 133.22 x86_64
=Sum: Perlové rozhraní ke knihovně uulib
+Des:
<!-- DT:Rich -->
<p>Perlové rozhraní ke knihovně uulib
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-OpenSSL-RSA 0.25 3.14 x86_64
=Sum: RSA encoding and decoding, using the openSSL libraries
+Des:
<!-- DT:Rich -->
<p>Crypt::OpenSSL::RSA provides the ability to RSA encrypt strings which are somewhat shorter than the block size of a key. It also allows for decryption, signatures and signature verification.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-SSLeay 0.57 1.15.1 x86_64
=Sum: perl module that provides LWP https support
+Des:
<!-- DT:Rich -->
<p>This perl module provides support for the https protocol under LWP, so
that a LWP::UserAgent can make https GET &amp; HEAD &amp; POST requests. Please
see perldoc LWP for more information on POST requests.
</p><p>
The Crypt::SSLeay package contains Net::SSL, which is automatically
loaded by LWP::Protocol::https on https requests, and provides the
necessary SSL glue for that module to work via these deprecated modules:
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-SmbHash 0.12 132.17 x86_64
=Sum: perlový modul Crypt::SmbHash
+Des:
<!-- DT:Rich -->
<p>Tento modul poskytuje funkce pro vytváření LM/NT hashů používaných Sambou
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-SQLite 1.14 11.14 x86_64
=Sum: The DBD::SQLite is a self contained RDBMS in a DBI driver
+Des:
<!-- DT:Rich -->
<p>SQLite is a small fast embedded SQL database engine.
</p><p>
DBD::SQLite embeds that database engine into a DBD driver, so
if you want a relational database for your project, but don&#39;t
want to install a large RDBMS system like MySQL or PostgreSQL,
then DBD::SQLite may be just what you need.
</p><p>
It supports quite a lot of features, such as transactions (atomic
commit and rollback), indexes, DBA-free operation, a large subset
of SQL92 supported, and more.
</p><p>
Linking against sqlite3-devel
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBI 1.607 1.16 x86_64
=Sum: Perlovské databázové rozhraní
+Des:
<!-- DT:Rich -->
<p>Perlovské databázové rozhraní autora Tima Bunce
</p>
-Des:
##----------------------------------------
=Pkg: perl-Date-Manip 5.54 2.21 x86_64
=Sum: Date Manipulation Routines
+Des:
<!-- DT:Rich -->
<p>Sada funkcí usnadňující nejrůznější manipulace s datem a časem.
Funkce mj. umožňují: snadno porovnávat dva časové údaje, zjistit
rozdíl dvou časových hodnot, načítat čas zadaný podle národních zvyklostí, atd..
</p>
-Des:
##----------------------------------------
=Pkg: perl-Digest-HMAC 1.01 436.17 x86_64
=Sum: Klíčovaný hash pro ověřování zpráv
+Des:
<!-- DT:Rich -->
<p>HMAC se používá pro zajištění integrity zpráv mezi dvěma partnery.
Používá MD5 nebo SHA-1. Mechanismus HMAC je popsán v RFC 2104.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Digest-MD4 1.5 1.22 x86_64
=Sum: RSA MD4 Message Digest algoritmus (perlový modul)
+Des:
<!-- DT:Rich -->
<p>Perlové rozhraní pro RSA Data Security Inc. MD4 Message-Digest algoritmus.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Digest-SHA1 2.11 1.22 x86_64
=Sum: Perlové rozhraní pro algoritmus SHA-1
+Des:
<!-- DT:Rich -->
<p>Modul Digest::SHA1 umožňuje použití algoritmu NIST SHA-1
v Perlových skriptech. Algoritmus vezme vstup a vytvoří 160 bitů dlouhý otisk.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Tail 0.99.3 1.22 x86_64
=Sum: Reading files which are continuously appended
+Des:
<!-- DT:Rich -->
<p>Tento perlový modul File::Tail byl napsán pro čtení souborů, k nimž jsou
 pravidelně připojovány další kousky textu.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Finance-Quote 1.17.0.20110222 0.7.1 x86_64
=Sum: Provides access to time-delayed stockquotes
+Des:
<!-- DT:Rich -->
<p>Finance::Quote provides access to time-delayed stockquotes from a
number of sources.  After you&#39;ve installed the pacakage, try
&#39;perldoc Finance::Quote&#39; for full information.  Alternatively,
you can &#39;perldoc lib/Finance/Quote.pm&#39; before the install.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Parser 3.56 1.18.1 x86_64
=Sum: Perlovské HTML rozhraní
+Des:
<!-- DT:Rich -->
<p>Sbírka modulů, které zpracovávají informace z HTML dokumentů
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-TableExtract 2.10 1.13 x86_64
=Sum: Simplifies extraction of information within tables in HTML documents
+Des:
<!-- DT:Rich -->
<p>HTML::TableExtract is a module that simplifies the extraction of
information contained in tables within HTML documents.
</p><p>
Tables of note may be specified using Headers, Depth, Count,
Attributes, or some combination of the three. See the module
documentation for details.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tagset 3.20 1.22 x86_64
=Sum: Tabulky dat pro práci s HTML
+Des:
<!-- DT:Rich -->
<p>Tabulky dat pro práci s HTML
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tree 3.23 2.7 x86_64
=Sum: Modules for representing, creating, and extracting information from HTML syntax trees
+Des:
<!-- DT:Rich -->
<p>This distribution contains a suite of modules for representing,
creating, and extracting information from HTML syntax trees; there is
also relevent documentation.  These modules used to be part of the
libwww-perl distribution, but are now unbundled in order to facilitate
a separate development track.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Multiplex 1.10 1.22 x86_64
=Sum: Manage IO on many file handles
+Des:
<!-- DT:Rich -->
<p>&quot;IO::Multiplex&quot; reduces the effort of managing multiple file handles.
It is a fancy front end to the &quot;select&quot; system call.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Socket-INET6 2.56 3.10.2.1 x86_64
=Sum: Provides an object interface to creating and using sockets
+Des:
<!-- DT:Rich -->
<p>IO::Socket::INET6 provides an object interface to creating and using sockets
in both AF_INET|AF_INET6 domain. It is built upon the IO::Socket interface and
inherits all the methods defined by IO::Socket.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Socket-SSL 1.38 5.2.2 x86_64
=Sum: IO::Socket::SSL modul perlu
+Des:
<!-- DT:Rich -->
<p>IO::Socket::SSL je třída, která implementuje objektově orientované
rozhranní k SSL soketům. Tato třída je potomkem IO::Socket::INET a
poskytuje podmnožinu metod pro zakladní rozhraní třídy.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-stringy 2.110 2.10 x86_64
=Sum: I/O objekty ve vnitřní paměti jako jsou řetězce a pole
+Des:
<!-- DT:Rich -->
<p>I/O objekty ve vnitřní paměti jako jsou řetězce a pole
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-tools 5.427 2.10.1 x86_64
=Sum: Moduly pro zpracování (a vytváření!) MIME entit
+Des:
<!-- DT:Rich -->
<p>Moduly pro zpracování (a vytváření!) MIME entit
</p>
-Des:
##----------------------------------------
=Pkg: perl-MailTools 2.04 1.22 x86_64
=Sum: Sada perlových modulů pro práci s e-poštou
+Des:
<!-- DT:Rich -->
<p>Sada perlových modulů pro práci s e-poštou
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-DNS 0.63 43.8 x86_64
=Sum: Perlové rozhraní k DNS resolveru
+Des:
<!-- DT:Rich -->
<p>Net::DNS je perlové rozhraní k DNS resolveru. Umožňuje programátorovi
provádět libovolné typy DNS dotazů v perlových skriptech. Pro detaily
a příklady nahlédněte prosím do manuálové stránky Net::DNS.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Daemon 0.43 1.21 x86_64
=Sum: Perlové rozšíření Net::Démon pro vytváření přenositelných démonů
+Des:
<!-- DT:Rich -->
<p>Net::Démon je abstraktní bázová třída pro velmi jednoduchou
implementaci přenositelných serverových aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-IP 1.25 46.21 x86_64
=Sum: allow easy manipulation of IPv4 and IPv6 addresses
+Des:
<!-- DT:Rich -->
<p>This is the Net::IP module, designed to allow easy manipulation of IPv4 and
IPv6 addresses.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-SSLeay 1.35 2.14 x86_64
=Sum: Net::SSLeay modul perlu
+Des:
<!-- DT:Rich -->
<p>Net::SSLeay modul perlu pro použití OpenSSL
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Server 0.97 1.22 x86_64
=Sum: Net::Server - Extensible, general Perl server engine
+Des:
<!-- DT:Rich -->
<p>&quot;Net::Server&quot; attempts to be a generic server as in &quot;Net::Daemon&quot; and
&quot;NetServer::Generic&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: perl-NetAddr-IP 4.004 1.24.1 x86_64
=Sum: NetAddr::IP - Manages IP addresses and subnets
+Des:
<!-- DT:Rich -->
<p>This  module is  designed as a help for managing (ranges  of)  IP
addresses. It includes efficient implementations for most common tasks
done  to subnets or  ranges of  IP addresses,  namely verifying  if an
address is within a subnet, comparing, looping, splitting subnets into
longer prefixes, compacting addresses to the shortest prefixes, etc.
</p>
-Des:
##----------------------------------------
=Pkg: perl-NetxAP 0.02 604.22 x86_64
=Sum: Rozhraní pro rodinku protokolů IMAP, IMSP, ACAP a ICAP
+Des:
<!-- DT:Rich -->
<p>Tento modul nabízí rozhraní pro rodinu protokolů IMAP,
IMSP, ACAP, a ICAP.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Parse-RecDescent 1.96.0 1.22 x86_64
=Sum: Perlovský modul RecDescent
+Des:
<!-- DT:Rich -->
<p>RecDescent generuje &quot;shora dolů rekurzivní&quot; syntaktický analyzátor textu,
pracující podle specifikace gramatiky podobné yacc.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PlRPC 0.2019 30.18 x86_64
=Sum: Perl Extension for Writing PlRPC Servers
+Des:
<!-- DT:Rich -->
<p>PlRPC (Perl RPC) is a package for implementing servers and clients that are entirely written in Perl. The name is borrowed from Sun&#39;s RPC (Remote Procedure Call), but it could as well be RMI like Java&#39;s Remote Method Interface, because PlRPC gives you the complete power of Perl&#39;s OO framework in a very simple manner.
</p>
-Des:
##----------------------------------------
=Pkg: perl-RPC-XML 0.60 28.14 x86_64
=Sum: A set of classes for core data, message and XML handling
+Des:
<!-- DT:Rich -->
<p>The RPC::XML package is a reference implementation of the XML-RPC standard.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SGMLS 1.03ii 392.8 x86_64
=Sum: Modul pro parsování SGML/XML
+Des:
<!-- DT:Rich -->
<p>SGMLSpm je perlový skript, který načítá výstup ESIS (z parseru SP) a vytváří pak rozhraní pro tento parser. Pokud dokáže parser pracovat i se XML, pak toto platí i zde.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SNMP 5.4.2.1 8.12.6.1 x86_64
=Sum: Perl-SNMP
+Des:
<!-- DT:Rich -->
<p>SNMP modul pro Perl5. Verze 3.1.0. Pro knihovnu UCD SNMPv3.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Socket6 0.22 1.24.1 x86_64
=Sum: IPv6 Sockets (Perl Module)
+Des:
<!-- DT:Rich -->
<p>The IPv6 related part of the C socket.h defines and structure manipulators.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Sub-Uplevel 0.2002 1.21 x86_64
=Sum: Sub::Uplevel - apparently run a function in a higher stack frame
+Des:
<!-- DT:Rich -->
<p>Like Tcl&#39;s uplevel() function, but not quite so dangerous. The idea is just to fool caller(). All the really naughty bits of Tcl&#39;s uplevel() are avoided.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TermReadKey 2.30 135.22 x86_64
=Sum: Perlový modul pro jednoduchou kontrolu terminálu
+Des:
<!-- DT:Rich -->
<p>ReadKey provádí ioctl kontrolu pro terminály a Win32 konzole,
takže je možné změnit režim vstupu a také podporuje neblokové
 čtení ze standardního vstupu. Navíc pak některé další terminálové
funkce jako je úprava velikosti okna nebo úpravu řídících znaků.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Exception 0.27 1.16 x86_64
=Sum: Test::Exception - Test exception based code
+Des:
<!-- DT:Rich -->
<p>This module provides a few convenience methods for testing exception based code. It is built with Test::Builder and plays happily with Test::More and friends.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TimeDate 1.16 71.22 x86_64
=Sum: Perlové moduly pro práci s časem a datem
+Des:
<!-- DT:Rich -->
<p>Moduly obsahují funkce pro výpočty s časem a datem.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tk 804.028 50.24 x86_64
=Sum: Perl Tk
+Des:
<!-- DT:Rich -->
<p>Perl Tk je nadstavba pro Perl, která kombinuje dobře strukturovanou
grafickou knihovnu Tk s výkonným skriptovacím jazykem Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-URI 1.37 1.22 x86_64
=Sum: Perlovské rozhraní pro URI objekty
+Des:
<!-- DT:Rich -->
<p>Perlovské rozhraní pro URI objekty
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unix-Syslog 0.100 153.15 x86_64
=Sum: Perl syslog interface
+Des:
<!-- DT:Rich -->
<p>Perlové rozhraní pro syslog
</p>
-Des:
##----------------------------------------
=Pkg: perl-WWW-Curl 4.09 2.1.72 x86_64
=Sum: Perl extension interface for libcurl
+Des:
<!-- DT:Rich -->
<p>This module provides a Perl interface to libcurl.
</p><p>
Authors:
<hr>
Georg Horn &lt;horn@koblenz-net.de&gt;
Cris Bailiff &lt;c.bailiff+curl@devsecure.com&gt;
Balint Szilakszi &lt;szbalint@cpan.org&gt;
</p>
-Des:
##----------------------------------------
=Pkg: perl-X500-DN 0.29 78.22 x86_64
=Sum: poskytuje rozhraní pro řetězce DN stylu RFC 2253
+Des:
<!-- DT:Rich -->
<p>X500::DN Provides a pure perl parser and formatter for RFC 2253 style
DN strings.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXML 1.66 1.14 x86_64
=Sum: XML::LibXML Perl Module
+Des:
<!-- DT:Rich -->
<p>This module implements a Perl interface to the GNOME libxml2 library. The
libxml2 library provides interfaces for parsing and manipulating XML
files. This module allows Perl programmers to make use of the highly capable
validating XML parser and the high performance DOM implementation.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXML-Common 0.13 70.7 x86_64
=Sum: Perlový modul XML::LibXML::Common
+Des:
<!-- DT:Rich -->
<p>XML::LibXML::Common contains several constants and functions that are shared by XML::LibXML, XML::GDOME, and XML::LibXSLT (not all done, yet).
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-NamespaceSupport 1.09 1.22 x86_64
=Sum: Perlový modul XML::NamespaceSupport
+Des:
<!-- DT:Rich -->
<p>This module offers a simple way to process namespaced XML names
(unames) from within any application that may need them. It
also helps maintain a prefix to namespace URI map, and provides
a number of basic checks.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Parser 2.36 1.18 x86_64
=Sum: Perlový modul - XML Parser
+Des:
<!-- DT:Rich -->
<p>Rozšiřující rozhraní pro Perl k XML analyzátoru expat, jehož autorem je
James Clark.
</p><p>
</p><p>
Příklady naleznete v /usr/share/doc/packages/perl-XML-Parser/samples.
Dokumentace je v manuálových stránkách XML::Parser a XML::Parser::Expat.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-SAX 0.96 2.7 x86_64
=Sum: XML::SAX Perl Module
+Des:
<!-- DT:Rich -->
<p>XML::SAX consists of several framework classes for using and building
Perl SAX2 XML parsers, filters, and drivers. It is designed around the
need to be able to &quot;plug in&quot; different SAX parsers to an application
without requiring programmer intervention. Those of you familiar with
the DBI will be right at home. Some of the designs come from the Java
JAXP specification (SAX part), only without the javaness.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Simple 2.18 1.15 x86_64
=Sum: Jednoduché API po čtení a zápis XML (perlový modul)
+Des:
<!-- DT:Rich -->
<p>XML::Simple - jednoduché API po čtení a zápis XML (hlavně konfiguračních souborů)
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Writer 0.604 2.10 x86_64
=Sum: Rozšíření Perlu pro psaní XML dokumentů
+Des:
<!-- DT:Rich -->
<p>XML::Writer je pomocný modul pro perlové programy, které vytváří XML
dokumenty. Modul zpracovává všechny atributy hodnot a znaků a vytváří
různé typy značek.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-XPath 1.13 74.15 x86_64
=Sum: A set of modules for parsing and evaluating XPath statements
+Des:
<!-- DT:Rich -->
<p>This module aims to comply exactly to the XPath specification at http://www.w3.org/TR/xpath and yet allow extensions to be added in the form of functions. Modules such as XSLT and XPointer may need to do this as they support functionality beyond XPath.
</p>
-Des:
##----------------------------------------
=Pkg: perl-apparmor 2.5.1.r1445 55.57.47 x86_64
=Sum: Perl interface for libapparmor functions
+Des:
<!-- DT:Rich -->
<p>This package provides the perl interface to AppArmor. It is used for perl
applications interfacing with AppArmor, including the AppArmor utiltities.
</p><p>
Authors:
<hr>
Steve Beattie &lt;sbeattie@suse.de&gt;
Matt Barringer &lt;mbarringer@suse.de&gt;
</p>
-Des:
##----------------------------------------
=Pkg: perl-base 5.10.0 64.55.1 x86_64
=Sum: Interpret jazyka Perl
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl is optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information.  It is also
good for many system management tasks.
</p><p>
Perl is intended to be practical (easy to use, efficient, and complete) rather than beautiful (tiny, elegant, and minimal).
</p><p>
This package contains only some basic modules and the perl binary itself.
</p>
-Des:
##----------------------------------------
=Pkg: perl-doc 5.10.0 64.55.1 x86_64
=Sum: Perl Documentation
+Des:
<!-- DT:Rich -->
<p>Perl man pages and pod files.
</p>
-Des:
##----------------------------------------
=Pkg: perl-gettext 1.05 91.95 x86_64
=Sum: Modul gettext pro Perl.
+Des:
<!-- DT:Rich -->
<p>Modul gettext pro Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ldap 0.37 1.19.3 x86_64
=Sum: Klientské rozhraní k LDAP serverům
+Des:
<!-- DT:Rich -->
<p>Klientské rozhraní pro LDAP servery.
</p>
-Des:
##----------------------------------------
=Pkg: perl-libwww-perl 5.816 2.23.1 x86_64
=Sum: modul poskytující API pro WWW
+Des:
<!-- DT:Rich -->
<p>Libwww-perl je soubor Perlovských modulů které poskytují jednoduché
rozhranní pro programování aplikací pro WWW.
</p>
-Des:
##----------------------------------------
=Pkg: perl-satsolver 0.42.0 6.7.31 x86_64
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: perl-spamassassin 3.3.1 10.8.3 x86_64
=Sum: Perl Modules For Using Spamassassin Within An Own Perl Script
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje perlový modul pro spamassassina včetně filtrovacích
pravidel a je vyžadován &quot;spamassassinem&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: permissions 2011.6.28 0.3.1 x86_64
=Sum: Základní přístupová práva SUSE Linuxu
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje několik specifikací důležitých konfiguračních souborů, adresářů a zařízení závisejících na lokálních bezpečnostních nastaveních.
Lokální bezpečnostní nastavení lze nastavit v /etc/sysconfig/security.
</p>
-Des:
##----------------------------------------
=Pkg: pessulus 2.28.0 1.1.94 x86_64
=Sum: Lockdown editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Pessulus is a lockdown editor for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: pessulus-lang 2.28.0 1.1.94 x86_64
=Sum: Lockdown editor for GNOME
+Des:
<!-- DT:Rich -->
<p>Pessulus is a lockdown editor for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: phalanx 22 513.8 x86_64
=Sum: Šachový program
+Des:
<!-- DT:Rich -->
<p>Program chytře hrající šachy.
</p>
-Des:
##----------------------------------------
=Pkg: phonon 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: phonon-backend-gstreamer-0_10 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: pidgin 2.6.6 0.11.1 x86_64
=Sum: Na GTK+ založený messenger s podporou více protokolů
+Des:
<!-- DT:Rich -->
<p>Pidgin allows you to talk to anyone using a variety of messaging protocols including AIM, MSN, Yahoo!, Jabber, Bonjour, Gadu-Gadu,
ICQ, IRC, Novell Groupwise, QQ, Lotus Sametime, SILC, Simple and
Zephyr.
These protocols are implemented using a modular, easy to use design.
To use a protocol, just add an account using the account editor.
</p><p>
Pidgin supports many common features of other clients, as well as many
unique features, such as Perl scripting, TCL scripting and C plugins.
</p><p>
Pidgin is not affiliated with or endorsed by America Online, Inc.,
Microsoft Corporation, Yahoo! Inc., or ICQ Inc.
</p>
-Des:
##----------------------------------------
=Pkg: pidgin-otr 3.2.0 1.36.26 x86_64
=Sum: "Off The Record" šifrovací modul pro GAIM
+Des:
<!-- DT:Rich -->
<p>Toto je zásuvný modul pro GAIM implementující OTR (Off the
Record) komunikaci. OTR poskytuje tyto funkce pro zaručení
soukromí hovoru:<ul>
<li>šifrování
</li><li>nikdo jiný nemůže číst vaše zprávy
</li><li>autentizace
</li><li>ujištění, že hovoříte s tím, s kým si myslíte
</li><li>odmítnutelnost
</li><li>Zprávy, které odesíláte, nemají digitální podpis kontrolovatelný
třetí stranou. Po ukončení konverzace může kdokoliv vytvořit zprávy
vypadající, jako by byly od vás. Během hovoru je však váš partner
ujištěn, že jsou zprávy autentické a nezměněné.
</li><li>dokonalé utajení předávání
</li><li>Pokud ztratíte vládu nad soukromými klíči, není kompromitována
žádná předcházející konverzace.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pidgin-sipe 1.3.3 4.17.2 x86_64
=Sum: Pidgin plugin for connecting to LCS
+Des:
<!-- DT:Rich -->
<p>Microsoft Live Communication Server (LCS) plugin for Pidgin.
</p>
-Des:
##----------------------------------------
=Pkg: pilot-link 0.12.3 2.26 x86_64
=Sum: Pilot-Link Based Synchronization Development Header Files
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers of libpisync.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry 0.7.5 61.33.1 x86_64
=Sum: Kolekce jednoduchých dialogů pro zadávání PIN a hesla
+Des:
<!-- DT:Rich -->
<p>Kolekce jednoduchých dialogů pro zadávání PIN a hesla.
Používá protokol Assuan z projektu Aegypten.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry-gtk2 0.7.5 61.33.1 x86_64
=Sum: Kolekce jednoduchých dialogů pro zadávání PIN a hesla
+Des:
<!-- DT:Rich -->
<p>Kolekce jednoduchých dialogů pro zadávání PIN a hesla.
Používá protokol Assuan z projektu Aegypten.
</p>
-Des:
##----------------------------------------
=Pkg: pinentry-qt 0.7.5 61.33.1 x86_64
=Sum: Kolekce jednoduchých dialogů pro zadávání PIN a hesla
+Des:
<!-- DT:Rich -->
<p>Kolekce jednoduchých dialogů pro zadávání PIN a hesla.
Používá protokol Assuan z projektu Aegypten.
</p>
-Des:
##----------------------------------------
=Pkg: pkcs11-helper 1.06 1.15 x86_64
=Sum: Helper Library for the Use with Smart Cards and the PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>pkcs11-helper allows using multiple PKCS#11 providers at the same time and selecting keys by id, label or certificate subject.
Besides it covers the following topics:<ul>
<li>Handling card removal and card insert events
</li><li>Handling card re-insert to a different slot
</li><li>Supporting session expiration serialization
</li><li>and much more
All this is possible using a simple API.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: pkg-config 0.23 1.22 x86_64
=Sum: Systém pro správu knihoven
+Des:
<!-- DT:Rich -->
<p>Program pkg-config je používán pro získávání informací o nainstalovaných
knihovnách. Obvykle je využíván při kompilaci a linkování proti jedné
nebo více knihovnám.
</p>
-Des:
##----------------------------------------
=Pkg: planner 0.14.3 3.41 x86_64
=Sum: Správa projektů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Planner je volně dostupná aplikace pro správu projektů, spravovaná
společností Imendio.
</p><p>
Pokud se chcete do projektu zapojit, přihlaste se prosím do konference
vývojářů Planner zasláním mailu na adresu
&quot;planner-dev-request@lists.imendio.com&quot;.
Do těla napište &quot;subscribe&quot;.
</p><p>
Archiv konverence najdete na stránce
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
K dispozici je také na irc.gnome.org IRC kanál #planner.
</p>
-Des:
##----------------------------------------
=Pkg: planner-lang 0.14.3 3.41 x86_64
=Sum: Správa projektů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Planner je volně dostupná aplikace pro správu projektů, spravovaná
společností Imendio.
</p><p>
Pokud se chcete do projektu zapojit, přihlaste se prosím do konference
vývojářů Planner zasláním mailu na adresu
&quot;planner-dev-request@lists.imendio.com&quot;.
Do těla napište &quot;subscribe&quot;.
</p><p>
Archiv konverence najdete na stránce
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
K dispozici je také na irc.gnome.org IRC kanál #planner.
</p>
-Des:
##----------------------------------------
=Pkg: plasma-addons 4.3.5 0.1.70 x86_64
=Sum: Additional Plasmoids for KDE Desktop
+Des:
<!-- DT:Rich -->
<p>Additional plasmoids from upstream for use on the KDE workspace
</p>
-Des:
##----------------------------------------
=Pkg: plasma-theme-aya 4.3.5 0.3.30 x86_64
=Sum: Theme for Plasma
+Des:
<!-- DT:Rich -->
<p>This package contains the Plasma theme Aya.
</p>
-Des:
##----------------------------------------
=Pkg: plasmoid-networkmanagement 0.9.svn1043876 1.1.97 x86_64
=Sum: NetworkManager client for KDE 4
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a KDE 4 applet and connection editor for controlling network
connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: plasmoid-quickaccess 0.8.1 2.1.98 x86_64
=Sum: Quick Access Plasmoid for KDE Desktop
+Des:
<!-- DT:Rich -->
<p>This is a small applet designed for the panel to have quick access to
the most used folders.
</p>
-Des:
##----------------------------------------
=Pkg: plotutils 2.5 197.19 x86_64
=Sum: GNU kreslicí programy
+Des:
<!-- DT:Rich -->
<p>Kreslicí programy GNU Plotting Utilities sestávají ze sedmi programů
ovládaných z příkazového řádku - jsou to grafické programy `graph&#39;,
`plot&#39;, `tek2plot&#39; a `plotfont&#39;, a matematické programy `spline&#39;, `ode&#39;
a `double&#39;. S programy je distribuována GNU knihovna `libplot&#39;, kterou
používají uvedené grafické programy. `libplot&#39; je knihovna funkcí pro
dvojrozměrnou vektorovou grafiku nezávislou na zařízení, zahrnující
vektorové animace pro X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: plutil 1.3 8.4.4.9 x86_64
=Sum: Apple Binary and XML Property Lists conversion tool
+Des:
<!-- DT:Rich -->
<p>Apple Binary and XML Property Lists conversion tool.
</p>
-Des:
##----------------------------------------
=Pkg: pm-utils 0.99.4.20071229 12.14.1 x86_64
=Sum: Tools to suspend and hibernate computers
+Des:
<!-- DT:Rich -->
<p>pm-utils provide simple shell command line tools to suspend and hibernate computers that can be used to run vendor or distro supplied scripts on suspend and resume.
</p>
-Des:
##----------------------------------------
=Pkg: pmtools 20071116 44.20.2.1 x86_64
=Sum: ACPI debuger
+Des:
<!-- DT:Rich -->
<p>Sada nástrojů pro zobrazené ACPI tabulek BIOSu.
</p>
-Des:
##----------------------------------------
=Pkg: podsleuth 0.6.7 6.5.146 x86_64
=Sum: PodSleuth provides rich iPod metadata through HAL
+Des:
<!-- DT:Rich -->
<p>PodSleuth is a tool to discover detailed model information about an Apple (TM) iPod (TM). Its primary role is to be run as a callout by HAL because root access is needed to scan the device for required information. When the model information is discovered, it is merged into HAL as properties for other applications to use.
</p>
-Des:
##----------------------------------------
=Pkg: poppler-tools 0.12.3 1.3.1 x86_64
=Sum: PDF Rendering Library Tools
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, to provide PDF rendering functionality as a shared
library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new versions of these xpdf based viewers.  It is safe to say that
there is a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf-derived code
base to the world, it is hoped that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: popt 1.7 37.46.15 x86_64
=Sum: Knihovna pro jazyk C pro syntaktickou analýzu parametrů z příkazového řádku
+Des:
<!-- DT:Rich -->
<p>Popt je knihovna pro jazyk C pro zpracování parametrů z příkazového
řádku. Knihovna byla inspirována funkcemi getopt() a getopt_long(),
ale umožňuje výkonnější expanzi argumentů. Může analyzovat libovolná
pole ve stylu argv[] a automaticky nastavuje proměnné podle argumentů
z příkazového řádku. Popt umožňuje expanzi argumentů z příkazového
řádku pomocí aliasů definovaných v konfiguračních souborech a obsahuje
užitečné funkce pro zpracování libovolných řetězců z argv[] polí
s použitím pravidel používaných shelly.
</p>
-Des:
##----------------------------------------
=Pkg: popt-32bit 1.7 37.46.15 x86_64
=Sum: Knihovna pro jazyk C pro syntaktickou analýzu parametrů z příkazového řádku
+Des:
<!-- DT:Rich -->
<p>Popt je knihovna pro jazyk C pro zpracování parametrů z příkazového
řádku. Knihovna byla inspirována funkcemi getopt() a getopt_long(),
ale umožňuje výkonnější expanzi argumentů. Může analyzovat libovolná
pole ve stylu argv[] a automaticky nastavuje proměnné podle argumentů
z příkazového řádku. Popt umožňuje expanzi argumentů z příkazového
řádku pomocí aliasů definovaných v konfiguračních souborech a obsahuje
užitečné funkce pro zpracování libovolných řetězců z argv[] polí
s použitím pravidel používaných shelly.
</p>
-Des:
##----------------------------------------
=Pkg: postfix 2.5.13 0.17.4 x86_64
=Sum: Rychlý, bezpečný a flexibilní program pro posílání pošty
+Des:
<!-- DT:Rich -->
<p>Cílem postfixu je být alternativou pro široce používaný program sendmail.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql 8.3.14 0.2.1 x86_64
=Sum: Basic Clients and Utilities for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PostgreSQL je vyspělá objektově-relační databázový managment systém,
podporující rozšířenou množinu standardu SQL, včetně transakcí, cizích
klíčů, vnořených dotazů, triggerů, uživatelem definovaných typů a funkcí.
</p><p>
Balíček obsahuje zíkladní utility a klientské programy pro práci s databází
PostgreSQL a manuálové stránkySQL příkazů. Úplná dokumentace je v
balíčku postgresql-docs.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-libs-32bit 8.3.14 0.2.1 x86_64
=Sum: Sdílené knihovny potřebné pro všechny PostgreSQL klienty
+Des:
<!-- DT:Rich -->
<p>PostgreSQL je vyspělý objektově relační databázový systém podporující
rozšířenou množinu standardu SQL, včetně transakcí, cizích klíčů, vložených
dotazů, triggerů, uživatelem definovaných typů a funkcí.
</p><p>
Balíček obsahuje základní sdílené knihovny pro (téměř) libovolný klientský
program či rozhraní pracující s PostgreSQL. Abyste mohli používat kterýkoli
program komunikující se serverem PostgreSQL, musíte mít nainstalovaný
tento balíček.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-libs 8.3.14 0.2.1 x86_64
=Sum: Sdílené knihovny potřebné pro všechny PostgreSQL klienty
+Des:
<!-- DT:Rich -->
<p>PostgreSQL je vyspělý objektově relační databázový systém podporující
rozšířenou množinu standardu SQL, včetně transakcí, cizích klíčů, vložených
dotazů, triggerů, uživatelem definovaných typů a funkcí.
</p><p>
Balíček obsahuje základní sdílené knihovny pro (téměř) libovolný klientský
program či rozhraní pracující s PostgreSQL. Abyste mohli používat kterýkoli
program komunikující se serverem PostgreSQL, musíte mít nainstalovaný
tento balíček.
</p>
-Des:
##----------------------------------------
=Pkg: ppp 2.4.5.git 2.27.1 x86_64
=Sum: PPP (Point to Point Protocol) pro Linux
+Des:
<!-- DT:Rich -->
<p>Balíček ppp obsahuje PPP (Point-to-Point Protocol) démon pppd, další
ppp programy, dokumentaci a ukázkové soubory.
PPP poskytuje metodu pro přenos IP a IPX datagramů přes sériové
dvoubodové (point-to-point) linky, například přes modemové linky.
PPP démon zpracovává detaily navazování PPP spojení včetně
konfigurace síťového rozhraní a dojednávání PPP voleb.
</p>
-Des:
##----------------------------------------
=Pkg: ppp-userpass 2011.11.3 0.2.2.1 x86_64
=Sum: Password plugin for pppd
+Des:
<!-- DT:Rich -->
<p>This package provides a plugin for pppd to allow setting
the password as a pppd option instead of adding placing
it in the pap-secrets or cha-secrets files. It is particularly
useful to define ppp connections in a single pppd options file
under /etc/ppp/peers .
</p>
-Des:
##----------------------------------------
=Pkg: pptp 1.7.2 1.22 x86_64
=Sum: Klient Point-to-Point Tunneling Protocol (PPTP)
+Des:
<!-- DT:Rich -->
<p>Klient pro proprietární protokol Microsoftu - Point-to-Point Tunneling (PPTP).
Umožňuje připojení k VPN postavené na PPTP. Používá se u ADSL připojení.
Vyžaduje podporu MPPE v jádře. Balíček ppp-mppe.
</p>
-Des:
##----------------------------------------
=Pkg: preload 0.2 195.30 x86_64
=Sum: Předzavedení souborů do systémové cache pro rychlejší start
+Des:
<!-- DT:Rich -->
<p>Preload lists files to load into the system cache. This shortens system boot time if used correctly.
</p>
-Des:
##----------------------------------------
=Pkg: procinfo 18 198.14 x86_64
=Sum: Zobrazování informací z /proc
+Des:
<!-- DT:Rich -->
<p>The &quot;<tt>procinfo</tt>&quot; command gathers some system data from the <tt>/proc</tt> directory
and prints it nicely formatted on the standard output device.
</p>
-Des:
##----------------------------------------
=Pkg: procmail 3.22 240.4.1 x86_64
=Sum: Program pro lokální doručování emailů
+Del:
<!-- DT:Rich -->
<p>Balíček je vyžadován sendmailem pro doručování pošty.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Sendmail volá program procmail pro doručování emailů do lokálních
složek. Procmail může být zkonfigurován, aby ukládal dopisy do různých
složek.
</p>
-Des:
##----------------------------------------
=Pkg: procps 3.2.7 151.20.1 x86_64
=Sum: ps nástroje pro /proc
+Des:
<!-- DT:Rich -->
<p>Balíček procps obsahuje řadu systémových nástrojů umožňujících získání
informací o systému. Obsahuje ps, free, skill, snice, tload, top, uptime,
vmstat, w a watch. Příkazem ps zobrazíte běžící procesy. Příkaz top
vypisuje aktualizovanou tabulku s údaji o využívání systémových prostředků
jednotlivými procesy. Příkazem free zjistíte využití paměti. Příkaz skill
ukončuje příkaz (nedo zasílá jiný signál) zadané skupině procesů. Prioritu
prováděných příkazů změníte pomocí snice. Systémové zatížení podle tty
získáte příkazem tload. Pokud chcete, jak dlouho již váš systém běží, použijte
příkaz uptime. Přihlášené uživatele v systému vypíše příkaz w. Běžící
programy můžete sledovat příkazem watch a pokud vás zajímá statistika
týkající se paměti, stránkování a CPU aktivity, použijte vmstat.
</p>
-Des:
##----------------------------------------
=Pkg: psmisc 22.7 7.1.40 x86_64
=Sum: Programy pro správu procesů
+Des:
<!-- DT:Rich -->
<p>Balíček psmisc obsahuje nástroje pro správu procesů:
pstree, killall a fuser. Příkaz pstree zobrazuje všechny běžící procesy
ve stromové struktuře.  Příkaz killall odešle signál (SIGTERM pokud
nezadáte žádný parametr) procesu zadaného jména. Příkazem fuser
zjistíte PID procesů využívajících zadaný soubor nebo souborový systém.
</p>
-Des:
##----------------------------------------
=Pkg: pstoedit 3.45 1.31 x86_64
=Sum: Konvertor PostScriptu a PDF
+Des:
<!-- DT:Rich -->
<p>pstoedit converts PostScript and PDF files to other vector graphic formats so that they can be edited graphically.
</p><p>
pstoedit supports:
<ul>
<li>tgif: Tgif .obj format (for tgif version &gt;= 3)
</li><li>rpl: Real3D Programming Language Format
</li><li>lwo: LightWave 3D Object Format
</li><li>rib: RenderMan Interface Bytestream
</li><li>mif: (Frame)Maker Intermediate Format
</li><li>fig: .fig format for xfig
</li><li>xfig: .fig format for xfig
</li><li>pdf: Adobe&#39;s Portable Document Format
</li><li>gnuplot: gnuplot format
</li><li>ps: Flattened PostScript
</li><li>debug: For test purposes
</li><li>dump: For test purposes (same as debug)
</li><li>dxf: CAD exchange format
</li><li>java 1 and 2: Java applet source code
</li><li>idraw: Interviews draw format
</li><li>tcl/tk: Tcl/Tk
</li><li>hpgl: HPGL
</li><li>AI: Adobe Illustrator
</li><li>wmf: Windows Meta Files (WMF) (Windows 9x/NT only)
</li><li>ewm: Enhanced Windows Meta Files (EMF) (Windows 9x/NT only)
</li><li>OS/2 meta files (OS/2 only)
</li><li>PIC format for troff/groff
</li><li>MetaPost format for use with TeX/LaTeX
</li><li>LaTeX2e picture
</li><li>Kontour
</li><li>GNU Metafile (plotutils or libplot)
</li><li>Skencil formerly known as sketch  (http://www.skencil.org)
</li><li>Mathematica
</li><li>Conversion through ImageMagick to any format supported by ImageMagick
</li><li>SWF (beta release state--still lots of features missing, such as fonts, dash handling, etc.)
</li></ul>
pstoedit needs an installed Ghostscript interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: psutils p17 1001.22 x86_64
=Sum: Nástroje pro zpracování postscriptových souborů
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje některé programy pro zpracování postscriptových
dokumentů. Programy umožňují vybírat a přehazovat jednotlivé stránky,
vytvářet tiskové archy pro tisk bookletů a spojovat stránky pro současný
tisk několika stránek na jeden velký arch:
</p><p>
psbook          přeorganizuje stránky do tiskových archů
</p><p>
psselect        vybírá stránky a rozsahy stránek
</p><p>
pstops          provádí obecné přerovnání stránek a jejich výběr
</p><p>
psnup           umisťuje více tiskových stránek na jednu stránku papíru
</p><p>
psresize        mění velikost tiskového zrcadla dokumentu
</p><p>
epsffit         upravuje EPSF soubor do obdélníku zadané velikosti
</p><p>
Součástí balíčku je soubor README v /usr/share/doc/packages/psutils/, který
popisuje i několik perlových skriptů pro import postscriptových souborů,
a manuálové stránky pro každý ps program.
</p>
-Des:
##----------------------------------------
=Pkg: pth 2.0.7 102.22 x86_64
=Sum: GNU Portable Threads
+Des:
<!-- DT:Rich -->
<p>Pth is a very portable POSIX/ANSI-C based library for Unix platforms
which provides non-preemptive priority-based scheduling for multiple
threads of execution (&quot;multithreading&quot;) inside server applications.
All threads run in the same address space of the server application,
but each thread has it&#39;s own individual program-counter, run-time
stack, signal mask and errno variable.
</p>
-Des:
##----------------------------------------
=Pkg: ptools 0.1 4.1.43 x86_64
=Sum: The process tools collection
+Des:
<!-- DT:Rich -->
<p>pbuildid dumps the build-ids of an executable, core file or a process, given
the pid of that process.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio 0.9.23 0.7.128 x86_64
=Sum: A Networked Sound Server
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-esound-compat 0.9.23 0.7.128 x86_64
=Sum: ESOUND compatibility for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package provides the compatibility layer for drop-in replacement of ESOUND.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-gdm-hooks 0.9.23 0.7.128 x86_64
=Sum: PulseAudio GDM integration
+Des:
<!-- DT:Rich -->
<p>This package contains GDM integration hooks for the PulseAudio sound server.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-lang 0.9.23 0.7.128 x86_64
=Sum: A Networked Sound Server
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-bluetooth 0.9.23 0.7.128 x86_64
=Sum: Bluetooth proximity support for the PulseAudio sound server
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package includes support for Bluetooth-based sound devices.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-gconf 0.9.23 0.7.128 x86_64
=Sum: GCONF module for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-jack 0.9.23 0.7.128 x86_64
=Sum: JACK support for the PulseAudio sound server
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package includes support for Jack-based applications.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-lirc 0.9.23 0.7.128 x86_64
=Sum: LIRC module for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-x11 0.9.23 0.7.128 x86_64
=Sum: X11 module for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-module-zeroconf 0.9.23 0.7.128 x86_64
=Sum: Zeroconf module for PulseAudio
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio-utils 0.9.23 0.7.128 x86_64
=Sum: PulseAudio utilities
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: puppet 2.6.12 0.10.1 x86_64
=Sum: A network tool for managing many disparate systems
+Des:
<!-- DT:Rich -->
<p>Puppet lets you centrally manage every important aspect of your system using a
cross-platform specification language that manages all the separate elements
normally aggregated in different files, like users, cron jobs, and hosts,
along with obviously discrete elements like packages, services, and files.
</p>
-Des:
##----------------------------------------
=Pkg: pure-ftpd 1.0.22 3.15.1 x86_64
=Sum: Jednoduchý, rychlý a bezpečný FTP server
+Des:
<!-- DT:Rich -->
<p>Pure-FTPd je rychlý, kvalitní a standardům odpovídající FTP server
na bázi Troll-FTPd. Narozdíl od jiných populárních FTP serverů,
nemá žádné známé problémy s bezpečností. Je velice jednoduché
ho nastavit a je speciálně určen pro moderní linuxová jádra
(setfsuid, sendfile, capabilities).
Podporuje PAM, IPv6, chroot() domovské adresáře, virtuální domény,
má zabudován LS, anti-warez systém, omezování rychlosti, FXP,
měření poměru UL/DL, protokolové soubory jako Apache a mnoho dalšího.
</p>
-Des:
##----------------------------------------
=Pkg: pwdutils 3.2.15 0.13.1 x86_64
=Sum: Sada nástrojů pro správu uživatelských a skupinových účtů
+Del:
<!-- DT:Rich -->
<p>Tento balíček je vyžadován.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package includes the necessary programs for converting plain password
files to the shadow password format, and managing user and group accounts in
both local files and in an LDAP database.
</p>
-Des:
##----------------------------------------
=Pkg: pwlib 1.10.10 120.33 x86_64
=Sum: Portable Windows Library od Equivalence Pty. Ltd
+Des:
<!-- DT:Rich -->
<p>PWLib &quot;Portable Windows Library&quot;  je středně velká knihovna tříd, pomocí
kterých lze vytvářet aplikace které běží jak na Windows, tak na X Window
system. Původně měla být portována i pro Macintosh, ale to se nestalo. 
Je součástí projektu OpenH323 a základem pro řešení na bázi IP
telefonie. Více informací www.openh323.org.
</p>
-Des:
##----------------------------------------
=Pkg: pwlib-plugins-avc 1.10.10 120.33 x86_64
=Sum: AVC modul pro pwlib
+Des:
<!-- DT:Rich -->
<p>This plugin enables AVC (firewire control for digital video cameras) support in pwlib
</p>
-Des:
##----------------------------------------
=Pkg: pwlib-plugins-dc 1.10.10 120.33 x86_64
=Sum: DC modul pro pwlib
+Des:
<!-- DT:Rich -->
<p>This plugin enables DC control (via firewire for digital video cameras) for pwlib
</p>
-Des:
##----------------------------------------
=Pkg: pwlib-plugins-v4l2 1.10.10 120.33 x86_64
=Sum: V4L2 support for pwlib
+Des:
<!-- DT:Rich -->
<p>This plugin enables &#39;video for linux&#39; (version 2) support (e.g. for USB cameras) for pwlib.
</p>
-Des:
##----------------------------------------
=Pkg: python 2.6.0 8.12.2 x86_64
=Sum: Interpret jazyka Python
+Des:
<!-- DT:Rich -->
<p>Python je interpretovaný objektově orientovaný programovací jazyk často
srovnávaný s jazyky Tcl, Perl, Scheme nebo Java. Informace o Pythonu
můžete najít v dokumentaci a v tutoriálech obsažených v balíčku <a href="pkg://python-doc">python-doc</a>
(formát HTML) a <a href="pkg://python-doc-pdf">python-doc-pdf</a> (formát PDF).
</p><p>
Pokud budete chtít instalovat moduly používající distutils, potřebujete
nainstalovat balíček <a href="pkg://python-devel">python-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: python-ReportLab 2.1 2.8 x86_64
=Sum: Open Source PDF library for Python
+Des:
<!-- DT:Rich -->
<p>See http://www.reportlab.org/rl_toolkit.html
</p><p>
The ReportLab Open Source PDF library is a proven industry-strength PDF generating solution, that you can use for meeting your requirements and deadlines in enterprise reporting systems.
</p><p>
Our free Open Source PDF library is suitable for web publishers, developers or creative design professionals who need to quickly and easily create or automate complex (even data-driven) documents. It lets you create professional documents programmatically without being locked into one special technology and/or platform. It has grown over years in response to the real-world requirements of large financial institutions&#39; reporting needs, making it the trusted proven foundation of existing enterprise solutions rather than a just a fancy gimmick or interesting library.
</p><p>
This library implements a flexible layout engine named Platypus that builds documents from components like headlines, paragraphs, fonts, tables, bitmap images, vector graphics, etc. These flowable elements are placed in a document &quot;story&quot; following a set of templates for frames, pages and the entire document itself. In addition to the standard 14 PostScript fonts there is full support for custom embedded Type-1 as well as for Asian fonts. The included graphics subpackage provides a set of primitive shapes as well as reusable widgets building on them. Among the sample collections is a very useful set of business chart diagrams, including bar charts, line charts and pie charts. Different renderers can be used to create vector graphics (in fact, even full document pages) as individual components not only in PDF, but also in EPS and in a variety of bitmap formats including JPEG, PNG, GIF, BMP and PICT.
</p>
-Des:
##----------------------------------------
=Pkg: python-argparse 1.2.1 2.5.65 x86_64
=Sum: Python command-line parsing library
+Des:
<!-- DT:Rich -->
<p>The argparse module provides an easy, declarative interface for
creating command line tools, which knows how to:
<ul>
<li>parse the arguments and flags from sys.argv
</li><li>convert arg strings into objects for your program
</li><li>format and print informative help messages
</li><li>and much more...
</li></ul>
The argparse module improves on the standard library optparse module
in a number of ways including:
<ul>
<li>handling positional arguments
</li><li>supporting sub-commands
</li><li>allowing alternative option prefixes like + and /
</li><li>handling zero-or-more and one-or-more style arguments
</li><li>producing more informative usage messages
</li><li>providing a much simpler interface for custom types and actions
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-base 2.6.0 8.12.2 x86_64
=Sum: Python Interpreter base package
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
This package contains all of stand-alone Python files, minus binary modules that would pull in extra dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: python-base-32bit 2.6.0 8.12.2 x86_64
=Sum: Python Interpreter base package
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
This package contains all of stand-alone Python files, minus binary modules that would pull in extra dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: python-cairo 1.6.4 1.26 x86_64
=Sum: Python Bindings for Cairo
+Des:
<!-- DT:Rich -->
<p>Python bindings for cairo.
</p>
-Des:
##----------------------------------------
=Pkg: python-compizconfig 0.7.8 1.37 x86_64
=Sum: Python bindings for libraries/plugins for compizconfig-settings
+Des:
<!-- DT:Rich -->
<p>Python bindings for libraries/plugins for compizconfig-settings
</p>
-Des:
##----------------------------------------
=Pkg: python-curl 7.19.0 5.2.1.2 x86_64
=Sum: Python module interface to the cURL library
+Des:
<!-- DT:Rich -->
<p>PycURL is a Python module interface to the cURL library. PycURL can be
used to fetch objects identified by an URL within a Python program.
</p><p>
</p><p>
Authors:
<hr>
Kjetil Jacobsen &lt;kjetilja@gmail.com&gt;
Markus F.X.J. Oberhumer &lt;markus@oberhumer.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: python-curses 2.6.0 8.12.2 x86_64
=Sum: Pythonové rozhraní pro knihovnu (n)curses
+Des:
<!-- DT:Rich -->
<p>Snadno použitelný přístup ke knihovně konzolového uživatelského
rozhraní (CUI) (n)curses.
</p>
-Des:
##----------------------------------------
=Pkg: python-dateutil 1.4.1 1.20 x86_64
=Sum: A Python Datetime Library
+Des:
<!-- DT:Rich -->
<p>The python dateutil module provides powerful extensions to the standard datetime module.
<ul>
<li>Computing of relative deltas (next month, next year, next monday, last week of month, etc.)
</li><li>Computing of relative deltas between two given dates and/or datetime objects
</li><li>Computing of dates based on very flexible recurrence rules, using a superset of the
iCalendar specification. Parsing of RFC strings is supported as well.
</li><li>Generic parsing of dates in almost any string format.
</li><li>Timezone (tzinfo) implementations for tzfile(5) format files (/etc/localtime, /usr/share/zoneinfo, etc.),
TZ environment string (in all known formats), iCalendar format files, given ranges (with help from relative deltas),
local machine timezone, fixed offset timezone, UTC timezone, and Windows registry-based time zones.
</li><li>Internal up-to-date world timezone information based on Olson&#39;s database.
</li><li>Computing of Easter Sunday dates for any given year, using Western, Orthodox or Julian algorithms.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-devel 2.6.0 8.12.2 x86_64
=Sum: Include Files and Libraries Mandatory for Building Python Modules
+Des:
<!-- DT:Rich -->
<p>The Python programming language&#39;s interpreter can be extended with
dynamically loaded extensions and can be embedded in other programs.
</p><p>
This package contains header files, a static library, and development tools for building Python modules, extending the Python interpreter or embedding Python in applications.
</p>
-Des:
##----------------------------------------
=Pkg: python-dmidecode 3.10.11 0.6.1 x86_64
=Sum: Python module to access DMI data
+Des:
<!-- DT:Rich -->
<p>python-dmidecode is a python extension module that uses the
code-base of the &#39;dmidecode&#39; utility, and presents the data
as python data structures or as XML data using libxml2.
</p>
-Des:
##----------------------------------------
=Pkg: python-ethtool 0.3 0.4.1 x86_64
=Sum: Ethernet settings python bindings
+Des:
<!-- DT:Rich -->
<p>Python bindings for the ethtool kernel interface, that allows querying and changing of ethernet card settings, such as speed, port, auto-negotiation, and PCI locations.
</p>
-Des:
##----------------------------------------
=Pkg: python-gdata 1.2.2 1.20 x86_64
=Sum: Python library to access data through Google Data APIs
+Des:
<!-- DT:Rich -->
<p>The Google data Python Client Library provides a library and source code that make it easy to access data through Google Data APIs.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome 2.22.0 67.32 x86_64
=Sum: Python propojení pro GNOME
+Des:
<!-- DT:Rich -->
<p>PyGNOME je rozšiřující modul do Pythonu pro zpřístupnění GNOME
knihoven. To znamená, že máte přístup k více widgetům, jednoduchému
konfiguračnímu rozhraní, podpoře metadat a mnoha dalším vlastnostem.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-extras 2.19.1 145.38.1 x86_64
=Sum: Python propojení pro GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME-python-extras je rozšiřující modul pro python, který umožňuje přístup ke knihovnám GNOME. To znamená, že tím získáte přístup k více widgetům, jednoduchým konfiguračním rozhraním, podpoře metadat a dalším funkcím.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-menus 2.28.0.1 1.1.213 x86_64
=Sum: Python Bindings for the GNOME Desktop Menu
+Des:
<!-- DT:Rich -->
<p>Tento balík je svobodným softwarem a je součástí projektu GNOME.
</p><p>
Obsahuje implementaci návrhu &quot;Desktop Menu Specification&quot; z freedesktop.org:
</p><p>
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Obsaženy jsou rovněž konfigurační soubory nabídky GNOME, .directory
soubory a pomocné programy související s nabídkami.
</p>
-Des:
##----------------------------------------
=Pkg: python-gobject2 2.20.0 1.1.56 x86_64
=Sum: Python bindings for GObject
+Des:
<!-- DT:Rich -->
<p>Pygobjects is an extension module for python that gives you access to GLib&#39;s
GObjects.
</p>
-Des:
##----------------------------------------
=Pkg: python-goocanvas 0.10.0 1.27 x86_64
=Sum: Python bindings for goocanvas
+Des:
<!-- DT:Rich -->
<p>Python bindings for goocanvas.
</p>
-Des:
##----------------------------------------
=Pkg: python-gstreamer-0_10 0.10.17 1.1.124 x86_64
=Sum: Python Bindings for GStreamer
+Des:
<!-- DT:Rich -->
<p>This module contains a wrapper that allows GStreamer applications to be written in Python.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk 2.16.0 1.1.251 x86_64
=Sum: Pythonové propojení na sadu widgetů GTK+
+Des:
<!-- DT:Rich -->
<p>PyGTK je rozšiřující modul pro Python, který zpřístupňuje sadu widgetů
GTK+. Cokoli můžete napsat v jazyce C s GTK+, můžete napsat v Pythonu
s PyGTK (v rozumných mezích), ale se všemi pythonovskými výhodami.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk-vnc 0.3.9 1.1.215 x86_64
=Sum: Python bindings for the gtk-vnc library
+Des:
<!-- DT:Rich -->
<p>A module allowing use of the GTK-VNC widget from python
</p>
-Des:
##----------------------------------------
=Pkg: python-gtkglext 1.1.0 47.26 x86_64
=Sum: Python bindings for gtkglext
+Des:
<!-- DT:Rich -->
<p>PyGtkGLExt is a Python language binding for GtkGLExt.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtksourceview 2.4.0 1.32 x86_64
=Sum: Python bindings for the GTK+ source editing widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard
GTK+ 2.x text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p><p>
This package contains Python bindings for the library.
</p>
-Des:
##----------------------------------------
=Pkg: python-ldap 2.3.5 1.21 x86_64
=Sum: Pythonové rozhraní pro LDAP
+Des:
<!-- DT:Rich -->
<p>python-ldap obsahuje LDAP klientské API pro Python v duchu RFC1823.
Obsahuje modul  _ldapmodule, který obaluje LDAP C knihovnu, objektově
orientované API pro X.500 adresáře.
Více najdete na http://python-ldap.sourceforge.net/
</p>
-Des:
##----------------------------------------
=Pkg: python-louis 1.7.0 1.2.49 x86_64
=Sum: Braille Translator and Back-Translator - Python Bindings
+Des:
<!-- DT:Rich -->
<p>Liblouis is an open-source braille translator and back-translator.
It features support for computer and literary braille, supports
contracted and uncontracted translation for many, many languages
and has support for hyphenation. New languages can easily be added
through tables that support a rule- or dictionary based approach.
</p><p>
Liblouis also supports math braille (Nemeth and Marburg). The
formatting of braille is provided by the companion project
liblouisxml.
</p><p>
Liblouis is based on the translation routines in the BRLTTY
screenreader for Linux. It has, however, gone far beyond these
routines. It is named in honor of Louis Braille.
</p><p>
Included are also tools for testing and debugging tables.
</p>
-Des:
##----------------------------------------
=Pkg: python-lxml 2.1.2 1.20 x86_64
=Sum: A Pythonic Binding for the libxml2 and libxslt Libraries
+Des:
<!-- DT:Rich -->
<p>lxml is a Pythonic binding for the libxml2 and libxslt libraries.
It follows the ElementTree API as much as possible, building it on top of the native libxml2 tree.
It also extends this API to expose libxml2 and libxslt specific
functionality, such as XPath, Relax NG, XML Schema, XSLT, and c14n.
</p>
-Des:
##----------------------------------------
=Pkg: python-newt 0.52.10 1.35.7 x86_64
=Sum: Python bindings for newt
+Des:
<!-- DT:Rich -->
<p>The newt-python package contains the Python bindings for the newt library providing a python API for creating text mode interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: python-notify 0.1.1 5.1.126 x86_64
=Sum: Python bindings for libnotify
+Des:
<!-- DT:Rich -->
<p>Python bindings for libnotify.
</p>
-Des:
##----------------------------------------
=Pkg: python-numeric 24.2 195.17 x86_64
=Sum: Numerické rozšíření pro Python
+Des:
<!-- DT:Rich -->
<p>Numerical Python přidává rozšíření Pythonu pro rychlá, kompaktní a multidimenzionální rozšíření pole.
</p>
-Des:
##----------------------------------------
=Pkg: python-numpy 1.3.0 1.1.42 x86_64
=Sum: Array processing for numbers, strings, records and objects
+Des:
<!-- DT:Rich -->
<p>The fundamental package needed for scientific computing with Python is called
NumPy. This package contains:
<ul>
<li>a powerful N-dimensional array object
</li><li>sophisticated (broadcasting) functions
</li><li>basic linear algebra functions
</li><li>basic Fourier transforms
</li><li>sophisticated random number capabilities
</li><li>tools for integrating Fortran code.
</li></ul>
Authors:
<hr>
Todd Miller &lt;jmiller@stsci.edu&gt;
Perry Greenfield &lt;perry@stsci.edu&gt;
</p>
-Des:
##----------------------------------------
=Pkg: python-opengl 2.0.1.09 51.20 x86_64
=Sum: OpenGL rozhraní pro Python
+Des:
<!-- DT:Rich -->
<p>OpenGL rozhraní pro Python obsahující i podporu pro GL rozšíření, GLU, WGL, GLUT, GLE a Tk.
</p>
-Des:
##----------------------------------------
=Pkg: python-openssl 0.7.0 1.17.2 x86_64
=Sum: Python wrapper module around the OpenSSL library
+Des:
<!-- DT:Rich -->
<p>High-level wrapper around a subset of the OpenSSL library, includes
High-level wrapper around a subset of the OpenSSL library, includes<ul>
<li>SSL.Connection objects, wrapping the methods of Python&#39;s portable
sockets
</li><li>Callbacks written in Python
</li><li>Extensive error-handling mechanism, mirroring OpenSSL&#39;s error codes
...  and much more ;)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-orbit 2.14.3 137.26 x86_64
=Sum: Python propojení s ORBit
+Des:
<!-- DT:Rich -->
<p>Python propojení s ORBit. ORBit je CORBA Object Request Broker používaný např. GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: python-pam 0.5.0 3.18 x86_64
=Sum: Python bindings for PAM
+Des:
<!-- DT:Rich -->
<p>This release supports the core PAM API. There is still some missing functionality, but it should implement enough of the API for most needs.
There is not much in the way of documentation at this point. If you are familiar with the PAM API, a quick glance at the sample program should get you going.
</p>
-Des:
##----------------------------------------
=Pkg: python-pywbem 0.7 6.13 x86_64
=Sum: Python module for making CIM operation calls using the WBEM protocol
+Des:
<!-- DT:Rich -->
<p>PyWBEM is a Python module for making CIM operation calls using the WBEM protocol to query and update managed objects.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt 3.17.6 1.25 x86_64
=Sum: Podpora Pythonu pro Qt
+Des:
<!-- DT:Rich -->
<p>Knihovny potřebné pro psaní grafických aplikací používajících Qt v Pythonu.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt4 4.6.2 0.1.87 x86_64
=Sum: PyQt - python bindings for Qt 4
+Des:
<!-- DT:Rich -->
<p>PyQt is a set of Python bindings for Trolltech&#39;s Qt application framework and runs on all platforms supported by Qt including Windows, MacOS/X and Linux. There are two sets of bindings: PyQt v4 supports Qt v4; and the older PyQt v3 supports Qt v3 and earlier. The bindings are implemented as a set of Python modules and contain over 300 classes and nearly 6,000 functions and methods.
</p>
-Des:
##----------------------------------------
=Pkg: python-satsolver 0.42.0 6.7.31 x86_64
=Sum: Python bindings for satsolver
+Des:
<!-- DT:Rich -->
<p>This allows to use satsolver functionality from Python
</p>
-Des:
##----------------------------------------
=Pkg: python-setuptools 0.6c8 10.19.2.1 x86_64
=Sum: Download, build, install, upgrade, and uninstall Python packages -- easily!
+Des:
<!-- DT:Rich -->
<p>setuptools is a collection of enhancements to the Python distutils that allow you to more easily build and distribute Python packages, especially ones that have dependencies on other packages.
</p>
-Des:
##----------------------------------------
=Pkg: python-sip 4.9.2 0.1.59 x86_64
=Sum: SIP tool to create python bindings
+Des:
<!-- DT:Rich -->
<p>SIP is a tool that makes it very easy to create Python bindings for C and C++ libraries. It was originally developed to create PyQt, the Python bindings for the Qt toolkit, but can be used to create bindings for any C or C++ library.
</p>
-Des:
##----------------------------------------
=Pkg: python-tk 2.6.0 8.12.2 x86_64
=Sum: Pythonové rozhraní pro Tk - TkInter
+Des:
<!-- DT:Rich -->
<p>Pythonové rozhraní pro Tk. Tk je sada nástrojů pro vytváření GUI
pocházející z Tcl. Toto pythonové rozhraní používá např. balíček &quot;xrpm&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: python-urlgrabber 3.9.1 0.1.2 x86_64
=Sum: A high-level cross-protocol url-grabber
+Des:
<!-- DT:Rich -->
<p>A high-level cross-protocol url-grabber for python supporting HTTP, FTP and file locations.  Features include keepalive, byte ranges, throttling, authentication, proxies and more.
</p>
-Des:
##----------------------------------------
=Pkg: python-xdg 0.16 2.17 x86_64
=Sum: Python library to access freedesktop.org standards
+Des:
<!-- DT:Rich -->
<p>python-xdg (PyXDG) is a python library to access freedesktop.org standards.
</p><p>
Currently supported are:<ul>
<li>Base Directory Specification Version 0.6
</li><li>Menu Specification Version 1.0-draft1
</li><li>Desktop Entry Specification Version 0.9.4
</li><li>Icon Theme Specification Version 0.8
</li><li>Recent File Spec 0.2
</li><li>Shared-MIME-Database Specification 0.13
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-xml 2.6.0 8.12.2 x86_64
=Sum: XML rozhraní pro Python
+Des:
<!-- DT:Rich -->
<p>Modul expat je pythonové rozhraní pro expat XML parser. Od verze Python2.x
je pevnou součástí distribuce Pythonu.
</p>
-Des:
##----------------------------------------
=Pkg: python-zypp 0.5.3 1.5.165 x86_64
=Sum: Python Bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides Python bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: pyxml 0.8.4 194.23.38 x86_64
=Sum: XML nástroje v Pythonu
+Des:
<!-- DT:Rich -->
<p>Balíček v současnosti obsahuje:
</p><p>
<ul>
<li>XML analyzátory: Pyexpat, xmlproc a sgmlop.c
</li><li>SAX rozhraní
</li><li>minidom, implementace DOM rozhraní
</li><li>4DOM a 4XPath
</li><li>Implementace schémat: TREX
</li><li>Různé pomocné moduly a funkce 
</li><li>Dokumentace a ukázkové programy (různí autoři)
</li></ul>
Kód byl vyvinut bazarovým stylem přispívateli z Python XML Special
Interest Group, proto prosím komentáře nebo otázky
posílejte na &lt;xml-sig@python.org&gt;. Chyby můžete nahlásit na:
</p><p>
http://sourceforge.net/tracker/index.php?group_id=6473&amp;atid=106473
</p><p>
Domovská stránka Python XML-SIG:
http://www.python.org/topics/xml/
</p>
-Des:
##----------------------------------------
=Pkg: qt3 3.3.8b 88.21 x86_64
=Sum: Knihovna pro vývoj aplikací s grafickým rozhraním
+Des:
<!-- DT:Rich -->
<p>Qt je programová knihovna pro vývoj aplikací s grafickým uživatelským rozhraním,
která vám umožní rychle vyvíjet profesionální aplikace. Qt knihovna není dostupná
pouze pro Linux, ale také pro ostatní operační systémy včetně Windows. Proto je
možné psát jednoduše přenositelné programy.
</p><p>
Pro vývoj aplikací pod Qt, které mají jinou licencí než GPL, potřebujete licenci.
Tu lze získat na sales@trolltech.com.
</p><p>
V /usr/share/doc/packages/qt3 naleznete bližší informace o nových funkcích Qt knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-32bit 3.3.8b 88.21 x86_64
=Sum: Knihovna pro vývoj aplikací s grafickým rozhraním
+Des:
<!-- DT:Rich -->
<p>Qt je programová knihovna pro vývoj aplikací s grafickým uživatelským rozhraním,
která vám umožní rychle vyvíjet profesionální aplikace. Qt knihovna není dostupná
pouze pro Linux, ale také pro ostatní operační systémy včetně Windows. Proto je
možné psát jednoduše přenositelné programy.
</p><p>
Pro vývoj aplikací pod Qt, které mají jinou licencí než GPL, potřebujete licenci.
Tu lze získat na sales@trolltech.com.
</p><p>
V /usr/share/doc/packages/qt3 naleznete bližší informace o nových funkcích Qt knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: qt4-qtscript 0.1.0 3.5.7 x86_64
=Sum: Qt bindings generator for Qt Script
+Des:
<!-- DT:Rich -->
<p>Qt Script Generator is a tool that generates Qt bindings for Qt Script. With the generated bindings you get access to substantial portions of the Qt API from within Qt Script.
</p>
-Des:
##----------------------------------------
=Pkg: qtc 0.7a 134.25 x86_64
=Sum: C vazby do Qt
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje knihovny potřebné k psaní aplikací v C (ne v C++) pro Qt.
</p>
-Des:
##----------------------------------------
=Pkg: qtcurve-gtk2 0.59.7 2.30 x86_64
=Sum: QtCurve style for Gtk2
+Des:
<!-- DT:Rich -->
<p>This is the QtCurve style. QtCurve is available for both Gtk2+ and Qt3.
</p>
-Des:
##----------------------------------------
=Pkg: qtcurve-gtk2-32bit 0.59.7 2.30 x86_64
=Sum: QtCurve style for Gtk2
+Des:
<!-- DT:Rich -->
<p>This is the QtCurve style. QtCurve is available for both Gtk2+ and Qt3.
</p>
-Des:
##----------------------------------------
=Pkg: qtcurve-kde 0.59.5 1.32 x86_64
=Sum: QtCurve style for KDE
+Des:
<!-- DT:Rich -->
<p>This is the QtCurve style. QtCurve is available for both Gtk2+ and Qt3.
</p>
-Des:
##----------------------------------------
=Pkg: qtsharp 0.7.1 161.29 x86_64
=Sum: Propojení Qt pro C#
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje C# propojení pro Qt, které je možné používat s Mono nebo pnet kompilátorem.
</p>
-Des:
##----------------------------------------
=Pkg: quota 3.16 50.37.1 x86_64
=Sum: Systém diskových kvót
+Des:
<!-- DT:Rich -->
<p>The quota subsystem allows a system administrator to set soft and hard limits on used space and the number of inodes used for users and groups. The kernel must be compiled with disk quota support enabled (SUSE kernels have this support).
</p>
-Des:
##----------------------------------------
=Pkg: raptor 1.4.18 28.21 x86_64
=Sum: Raptor RDF parsovací nástroje
+Des:
<!-- DT:Rich -->
<p>Raptor je RDF Parser Toolkit pro Redland obsahující
řadu RDF parserů.
</p>
-Des:
##----------------------------------------
=Pkg: rarian 0.8.1 5.17.9 x86_64
=Sum: Rarian is designed to be a replacement for scrollkeeper
+Des:
<!-- DT:Rich -->
<p>Rarian is designed to be a replacement for scrollkeeper.  It is
currently undergoing heavy development.  As of writing, rarian can be
installed in place of scrollkeeper and everything will work okay (as
far as my testing indicates)
</p>
-Des:
##----------------------------------------
=Pkg: raw-thumbnailer 0.99.1 4.35 x86_64
=Sum: Thumbnailer for digital camera RAW
+Des:
<!-- DT:Rich -->
<p>A thumbnailer used by Nautilus for digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: rdesktop 1.6.0 39.11.1 x86_64
=Sum: A Remote Desktop Protocol client
+Des:
<!-- DT:Rich -->
<p>rdesktop je open source klient pro Windows NT Terminal Server a Windows 2000 Terminal Services, který je s to nativně komunikovat remote desktop protokolem a tak zborazovat NT desktop uživatele. Stejně jako u Citrix ICA nejsou třeba žádné úpravy na serveru.
</p>
-Des:
##----------------------------------------
=Pkg: rdiff-backup 1.2.1 1.17 x86_64
=Sum: Convenient and transparent local/remote incremental mirror/backup
+Des:
<!-- DT:Rich -->
<p>rdiff-backup backs up one directory to another, possibly over a network. The target directory ends up a copy of the source directory, but extra reverse diffs are stored in a special subdirectory of that target directory, so you can still recover files lost some time ago. The idea is to combine the best features of a mirror and an incremental backup. rdiff-backup also preserves subdirectories, hard links, dev files, permissions, uid/gid ownership, and modification times. Also, rdiff-backup can operate in a bandwidth efficient manner over a pipe, like rsync. Thus you can use rdiff-backup and ssh to securely back a hard drive up to a remote location, and only the differences will be transmitted. Finally, rdiff-backup is easy to use and settings have sensical defaults.
</p>
-Des:
##----------------------------------------
=Pkg: re2c 0.13.5 1.22 x86_64
=Sum: Tool for generating C-based recognizers from regular expressions
+Des:
<!-- DT:Rich -->
<p>re2c is a tool for writing fast and flexible lexers. Unlike other such tools,
it concentrates solely on generating efficient code for matching regular
expressions. This make it suitable for a wide variety of applications. The
generated scanners approach hand-crafted ones in terms of size and speed.
</p>
-Des:
##----------------------------------------
=Pkg: readline-doc 5.2 147.9.13 x86_64
=Sum: Documentation how to Use and Program with the Readline Library
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation for using the readline library
as well as programming with the interface of the readline library.
</p>
-Des:
##----------------------------------------
=Pkg: recode 3.6 635.18 x86_64
=Sum: Konvertor pro převody mezi různými kódováními
+Des:
<!-- DT:Rich -->
<p>This package converts various character sets.
</p>
-Des:
##----------------------------------------
=Pkg: reiserfs 3.6.21 1.13 x86_64
=Sum: Programy pro souborový systém ReiserFS
+Des:
<!-- DT:Rich -->
<p>Programy pro tvorbu souborového systému (mkreiserfs), kontrolu (reiserfsck)
a změnu velikosti (resize_reiserfs).
</p>
-Des:
##----------------------------------------
=Pkg: rhnlib 2.5.28 0.7.1 x86_64
=Sum: Python libraries for the Spacewalk project
+Des:
<!-- DT:Rich -->
<p>rhnlib is a collection of python modules used by the Spacewalk software.
</p>
-Des:
##----------------------------------------
=Pkg: rng-tools 2 133.1.51 x86_64
=Sum: Support daemon for hardware random device
+Des:
<!-- DT:Rich -->
<p>This  daemon  feeds data from a random number generator to
the kernel&#39;s  random  number  entropy  pool,  after  first
checking the data to ensure that it is properly random.
</p>
-Des:
##----------------------------------------
=Pkg: rpcbind 0.1.6+git20080930 6.15 x86_64
=Sum: Transport independent RPC portmapper
+Des:
<!-- DT:Rich -->
<p>Rpcbind is a replacement for portmap.
Whereas portmap supports only UDP and TCP transports over INET (IPv4),
rpcbind can be configured to work on various transports supported by
the TI-RPC. This includes TCP and UDP over IPv6. Moreover, rpcbind
provides additional functions in regards to portmap.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-32bit 4.4.2.3 37.46.15 x86_64
=Sum: Správce RPM balíčků
+Des:
<!-- DT:Rich -->
<p>Správce balíčků RPM je hlavní nástroj pro správu programových balíčků
v distribuci SuSE Linux.
</p><p>
RPM může být používán pro instalaci a odstraňování programových balíčků.
Také aktualizace balíčků je s RPM velmi snadná. Systém RPM udržuje
informace o všech manipulacích s balíčky v centrální databázi, díky které
lze snadno získat seznam všech nainstalovaných balíčků; RPM také podporuje
dotazy do této databáze.
</p>
-Des:
##----------------------------------------
=Pkg: rpm 4.4.2.3 37.46.15 x86_64
=Sum: Správce RPM balíčků
+Des:
<!-- DT:Rich -->
<p>Správce balíčků RPM je hlavní nástroj pro správu programových balíčků
v distribuci SuSE Linux.
</p><p>
RPM může být používán pro instalaci a odstraňování programových balíčků.
Také aktualizace balíčků je s RPM velmi snadná. Systém RPM udržuje
informace o všech manipulacích s balíčky v centrální databázi, díky které
lze snadno získat seznam všech nainstalovaných balíčků; RPM také podporuje
dotazy do této databáze.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-python 4.4.2.3 37.46.7 x86_64
=Sum: Python Bindings for Manipulating RPM Packages
+Des:
<!-- DT:Rich -->
<p>Balíček RPM python obsahuje moduly pro přístup aplikací
napsaných v jazyce python k rozhraní knihoven RPM.
</p><p>
Balíček nainstalujte, pokud chcete ve svých programech
manipulovat s databází RPM.
</p>
-Des:
##----------------------------------------
=Pkg: rrdtool 1.3.4 2.8 x86_64
=Sum: Nástroj pro ukládání a analýzu záznamů (log soubory)
+Des:
<!-- DT:Rich -->
<p>RRDtool Vám umožní ukládat a analyzovat data, která shromáždíte
z různých zdrojů. Část RRDtoolu pro analýzu dat je založena
na schopnosti rychle vytvářet grafické reprezentace dat sebraných
za určité časové období.
</p>
-Des:
##----------------------------------------
=Pkg: rsh 0.17 706.18.1 x86_64
=Sum: Klienti pro vzdálený přístup (rsh, rlogin, rcp)
+Des:
<!-- DT:Rich -->
<p>This package contains programs that allow users to run
commands on remote machines, to log in to other machines, and to copy files
between machines (rsh, rexec, rlogin, and rcp).  These commands
use rhosts style authentication.
</p><p>
For secure communication, <a href="pkg://openssh"> SSH</a> should be used.
</p>
-Des:
##----------------------------------------
=Pkg: rsvg-view 2.26.0 2.3.1 x86_64
=Sum: SVG View using the GNOME Render SVG library
+Des:
<!-- DT:Rich -->
<p>This package contains a library to render SVG (scalable vector graphics)
data. This format has been specified by the W3C (see http://www.w3c.org).
</p>
-Des:
##----------------------------------------
=Pkg: rsvg2-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for rsvg
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje Mono vazby pro librsvg.
</p>
-Des:
##----------------------------------------
=Pkg: rsync 3.0.4 2.38.1 x86_64
=Sum: Náhrada za programy rcp a mirror s mnoha novými vlastnostmi
+Des:
<!-- DT:Rich -->
<p>Program rsync používá &quot;rsync algoritmus&quot; pro velmi rychlou
synchronizaci vzdálených souborů. Algoritmus spočívá v odesílání pouze
rozdílů v souborech přes síť, bez nutnosti, aby obě sady souborů byly
nejdříve dostupné na jednom počítači. Na první pohled se to může zdát
nemožné, protože pro zjištění rozdílů mezi dvěma soubory je normálně
nutný lokální přístup k oběma souborům.
</p><p>
Součástí balíčku je technická zpráva popisující algoritmus rsync.
</p>
-Des:
##----------------------------------------
=Pkg: ruby 1.8.7.p357 0.7.1 x86_64
=Sum: Interpretovaný objektově orientovaný skriptovací jazyk
+Des:
<!-- DT:Rich -->
<p>Ruby je interpretovaným skriptovacím jazykem, který
umožňuje jednoduchý a rychlý, objektově orientovaný, vývoj.
(Podobně jako Perl) Ruby je zláště dobrý v oblasti
&quot;text processingu&quot; a správy systému. Je jednoduchý, intuitivní
a rozšiřitelný.
<ul>
<li>Vlastnosti Ruby

</li><li>jednoduchá syntaxe
</li><li>*Normální* objektově orientované vlastnosti (např. třídy, metody volání)
</li><li>*Rozšířené* objektově orientové vlastnsoti např. Mix-in, Singletonova metoda)
</li><li>Přetížení operátorů
</li><li>Správa vyjímek
</li><li>Iterators a closures
</li><li>Úklid paměti (Garbage Collection)
</li><li>Dynamické nahrávání objektových souborů (na některých architekturách)
</li><li>Vysoce přenositelný (pracuje na řadě UN*X systémů; DOS, Windows, Mac, BeOS atd.)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ruby-ffi 1.0.9 0.6.4 x86_64
=Sum: A FFI for ruby
+Des:
<!-- DT:Rich -->
<p>A ruby foreign function interface.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-rb-inotify 0.8.5 0.6.2 x86_64
=Sum: A ruby interface to inotify
+Des:
<!-- DT:Rich -->
<p>A ruby interface to inotify using FFI.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-rpm 1.2.4 0.7.2 x86_64
=Sum: An interface to access RPM database for Ruby
+Des:
<!-- DT:Rich -->
<p>Ruby/RPM is an interface to access RPM database for Ruby
</p>
-Des:
##----------------------------------------
=Pkg: rxvt-unicode 9.05 1.17 x86_64
=Sum: Rxvt X Terminal with Unicode Support
+Des:
<!-- DT:Rich -->
<p>rxvt-unicode is a clone of the well-known terminal emulator rxvt, modified to
store text in Unicode (either UCS-2 or UCS-4) and to use locale-correct input
and output.
It also supports mixing multiple fonts at the same time, including Xft fonts.
</p>
-Des:
##----------------------------------------
=Pkg: rzsz 0.12.20 934.22 x86_64
=Sum: Program pro přenos dat protokoly X-, Y- a Z-Modem
+Des:
<!-- DT:Rich -->
<p>rzsz umožňuje používat příkaz &quot;sz jméno_souboru&quot; pro odeslání souboru
na váš lokální počítač.
</p>
-Des:
##----------------------------------------
=Pkg: sabayon 2.28.1 0.2.107 x86_64
=Sum: Tool to maintain user profiles in a GNOME desktop
+Des:
<!-- DT:Rich -->
<p>Sabayon is a tool to help system administrators and users
change and maintain the default behaviour of the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: sabayon-admin 2.28.1 0.2.107 x86_64
=Sum: Graphical tools for Sabayon profile management
+Des:
<!-- DT:Rich -->
<p>The sabayon-admin package contains the graphical tools which a
sysadmin should use to manage Sabayon profiles.
</p>
-Des:
##----------------------------------------
=Pkg: sabayon-lang 2.28.1 0.2.107 x86_64
=Sum: Tool to maintain user profiles in a GNOME desktop
+Des:
<!-- DT:Rich -->
<p>Sabayon is a tool to help system administrators and users
change and maintain the default behaviour of the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: samba 3.6.3 0.18.3 x86_64
=Sum: A SMB/CIFS File, Print, and Authentication Server
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
The package named samba contains all programs that are needed to act as a server.  The binaries expect the configuration file to be found in /etc/samba/smb.conf
</p><p>
For a more detailed description of Samba, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-32bit 3.6.3 0.18.3 x86_64
=Sum: A SMB/CIFS File, Print, and Authentication Server
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
The package named samba contains all programs that are needed to act as a server.  The binaries expect the configuration file to be found in /etc/samba/smb.conf
</p><p>
For a more detailed description of Samba, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-client 3.6.3 0.18.3 x86_64
=Sum: Klientské programy pro Samba
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
The package named samba-client contains all programs that are needed to act as a Samba client.  The binaries expect the configuration file to be found in /etc/samba/smb.conf
</p><p>
For a more detailed description of Samba, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>The configuration files are located in /etc/samba/. Additional documentation for the package is located in /usr/share/doc/packages/samba/. General information about the packaging of this Samba package can be found in
README.SUSE and a fully commented configuration example in examples/smb.conf.SUSE.
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-client-32bit 3.6.3 0.18.3 x86_64
=Sum: Klientské programy pro Samba
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
The package named samba-client contains all programs that are needed to act as a Samba client.  The binaries expect the configuration file to be found in /etc/samba/smb.conf
</p><p>
For a more detailed description of Samba, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>The configuration files are located in /etc/samba/. Additional documentation for the package is located in /usr/share/doc/packages/samba/. General information about the packaging of this Samba package can be found in
README.SUSE and a fully commented configuration example in examples/smb.conf.SUSE.
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-krb-printing 3.6.3 0.18.3 x86_64
=Sum: Wrapper binary for kerberized printing
+Des:
<!-- DT:Rich -->
<p>A wrapper binary to run smbspool with the original calling UID.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-winbind 3.6.3 0.18.3 x86_64
=Sum: Winbind démon a nástroj
+Des:
<!-- DT:Rich -->
<p>Toto je winbind démon a wbinfo nástroj.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba-winbind-32bit 3.6.3 0.18.3 x86_64
=Sum: Winbind démon a nástroj
+Des:
<!-- DT:Rich -->
<p>Toto je winbind démon a wbinfo nástroj.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba4 3.99.90.alpha10 0.2.31 x86_64
=Sum: Samba 4 (alpha release)
+Des:
<!-- DT:Rich -->
<p>An alpha release of Samba 4.
</p>
-Des:
##----------------------------------------
=Pkg: sane-backends 1.0.20 7.6.1 x86_64
=Sum: SANE (Scanner Access Now Easy) Scanner Drivers
+Des:
<!-- DT:Rich -->
<p>The software consists of SANE scanner drivers, &quot;scanimage,&quot;
and the &quot;saned&quot; daemon.
</p><p>
A SANE scanner driver is used via a SANE front-end. This package contains the command line front-end &quot;scanimage&quot;. There are various graphical front-ends like &quot;xscanimage&quot; (package sane-frontends), XSane (package xsane), and the KDE front-end Kooka (package kdegraphics3-scan).
</p><p>
The &quot;saned&quot; daemon provides the service &quot;sane-port&quot; to access scanners that are connected to a server via network from client hosts that run the &quot;net&quot; meta driver.
</p>
-Des:
##----------------------------------------
=Pkg: sane-backends-32bit 1.0.20 7.6.1 x86_64
=Sum: SANE (Scanner Access Now Easy) Scanner Drivers
+Des:
<!-- DT:Rich -->
<p>The software consists of SANE scanner drivers, &quot;scanimage,&quot;
and the &quot;saned&quot; daemon.
</p><p>
A SANE scanner driver is used via a SANE front-end. This package contains the command line front-end &quot;scanimage&quot;. There are various graphical front-ends like &quot;xscanimage&quot; (package sane-frontends), XSane (package xsane), and the KDE front-end Kooka (package kdegraphics3-scan).
</p><p>
The &quot;saned&quot; daemon provides the service &quot;sane-port&quot; to access scanners that are connected to a server via network from client hosts that run the &quot;net&quot; meta driver.
</p>
-Des:
##----------------------------------------
=Pkg: sane-backends-autoconfig 1.0.20 7.6.1 x86_64
=Sum: USB Scanner Autoconfiguration
+Des:
<!-- DT:Rich -->
<p>USB scanner autoconfiguration happens via udev.
</p><p>
The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is &quot;complete&quot; or &quot;good&quot;, and which do not require firmware upload.
</p><p>
When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated).
</p><p>
It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected.
</p><p>
Note that driver activation alone is not sufficient to have a usable &quot;scanner autoconfiguration&quot; for the user. What is also needed are appropriate USB device file permissions so that the user&#39;s scanning software can access the device. But this is already in place via the HAL 70-scanner.fdi file which triggers the resmgr to grant access permissions for the user who is currently locally logged in (i.e. who works directly at the computer where the USB scanner is).
</p><p>
If you do not like automated driver activation, do not install this package or remove it when it is already installed.
</p>
-Des:
##----------------------------------------
=Pkg: sane-frontends 1.0.14 302.32 x86_64
=Sum: SANE-frontends xscanimage, xcam, and scanadf
+Des:
<!-- DT:Rich -->
<p>xscanimage is a graphical scanner frontend for SANE. It can be invoked either directly from the command-line or through the GIMP image manipulation program.
</p><p>
xcam is a graphical camera frontend for SANE.
</p><p>
scanadf is a command-line frontend for SANE to control a scanner with an automatic document feeder (ADF).
</p>
-Des:
##----------------------------------------
=Pkg: sash 3.7 170.1.30 x86_64
=Sum: Samostatný shell s vestavěnými příkazy
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje:
</p><p>
-chgrp, -chmod, -chown, -cmp, -cp, -dd, -echo,
-ed, -grep, -gunzip, -gzip, -kill, -ln, -ls, -mkdir,
-mknod, -more, -mount, -mv, -printenv, -pwd, -rm,
-rmdir, -sync, -tar, -touch, -umount, -where
</p>
-Des:
##----------------------------------------
=Pkg: satsolver-tools 0.17.4 0.5.12 x86_64
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: sax2 8.1 561.557.1 x86_64
=Sum: Systém SuSE rozšířené konfigurace X
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje SuSE rozšířené nastavení X
</p>
-Des:
##----------------------------------------
=Pkg: sax2-gui 8.1 561.557.1 x86_64
=Sum: SUSE grafické rozhraní pro nastavení X Window
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje SuSE rozšířenou konfiguraci X
</p>
-Des:
##----------------------------------------
=Pkg: sax2-ident 8.1 561.557.1 x86_64
=Sum: informace o profilu a totožnosti pro SaX2
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytně nutný pro SaX2!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje informace o podporovaných grafických kartách a
jejich specifických nastaveních. Pro některé karty je potřeba speciální profil
pro správné nastavení parametrů, které nelze nastavit běžnou cestou pomocí SaX2.
</p>
-Des:
##----------------------------------------
=Pkg: sax2-libsax 8.1 561.557.1 x86_64
=Sum: SaX knihovna pro nastavení X Window systému
+Des:
<!-- DT:Rich -->
<p>libsax provides a C++ written library to manage X11 configurations
</p>
-Des:
##----------------------------------------
=Pkg: sax2-libsax-perl 8.1 561.557.1 x86_64
=Sum: Language binding to use libsax with perl
+Des:
<!-- DT:Rich -->
<p>This package provides a wrapper to be able to use libsax in
perl written programs
</p>
-Des:
##----------------------------------------
=Pkg: sax2-tools 8.1 561.557.1 x86_64
=Sum: X Window System nástroje pro SaX2
+Del:
<!-- DT:Rich -->
<p>Pamatujte,že tento balíček je vyžadován pro konfiguraci grafického systému
pomocí YaST2.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Několik malých systémových nástrojů pro X11 pro zpracování dat z vstupních zařízení,
například myši a klávesnice.
</p>
-Des:
##----------------------------------------
=Pkg: sbl 3.4.0 12.19 x86_64
=Sum: SuSE blinux
+Des:
<!-- DT:Rich -->
<p>SuSE blinux pro vytvoření braillovy řádky na konzoli.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This package use the ttyS0 device by default.
The installation of this package only makes sense if you use a
brailledisplay.
</p>
-Ins:
##----------------------------------------
=Pkg: sblim-cmpi-base 1.6.1 0.5.113 x86_64
=Sum: SBLIM Base Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation Base Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-base-testsuite 1.6.1 0.5.113 x86_64
=Sum: SBLIM Base Instrumentation (test suite)
+Des:
<!-- DT:Rich -->
<p>Test suite for the Standards Based Linux Instrumentation Base Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-dhcp 0.5.5 16.16 x86_64
=Sum: SBLIM CMPI dhcp Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux dhcp Instrumentation Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-ethport_profile 1.0.0 29.12 x86_64
=Sum: CMPI CIM provider for ethernet port profile
+Des:
<!-- DT:Rich -->
<p>CMPI CIM provider for ethernet port profile
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-fsvol 1.5.0 1.1.83 x86_64
=Sum: SBLIM File System & Volume Mgmt. Instrumentation for CMPI
+Des:
<!-- DT:Rich -->
<p>The Filesystem &amp; Volume Management Instrumentation allows you to get
information about mounted ( /etc/mtab ) and unmounted ( /etc/fstab )
filesystems via CIMOM technology/infrastructure.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-network 1.4.0 1.4.1 x86_64
=Sum: SBLIM Network Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation Network Providers.
Network Instrumentation vám umožní získávat informace
o síťovém nastavení přes CIMOM technology/infrastructure.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-nfsv3 1.1.0 0.1.83 x86_64
=Sum: SBLIM CMPI NFSv3 Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux NFSv3 Instrumentation Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-nfsv4 1.1.0 0.1.83 x86_64
=Sum: SBLIM CMPI NFSv4 Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux NFSv4 Instrumentation Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-params 1.3.0 0.1.82 x86_64
=Sum: SBLIM Linux Kernel Parameter Instrumentation for CMPI
+Des:
<!-- DT:Rich -->
<p>The various kernel parameter providers in this package expose the
Linux kernel parameters that are accessible under subdirs
of /proc/sys/. Each subdir contains kernel parameters for
the respective kernel function, and is implemented as a
separate CIM_Setting subclass. Each provider acts as
instrumentation for that particular kernel parameter subclass.
</p><p>
The respective kernel parameter providers allow an
administrator to view and possibly modify the many different kernel
parameters of a Linux system via the CIMOM. All kernel parameters
settings can be viewed, however only those
parameters whose associated file is writeable can be modified.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-smbios 0.3.2 0.4.1 x86_64
=Sum: SBLIM SMBIOS Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation System Management BIOS Providers. The
BIOS Instrumentation allows to get BIOS inventory information about a system
remotely via a CIMOM . These providers will function only on x86 architecture
for the moment .
</p><p>
Authors:
<hr>
SBLIM Project
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-sysfs 1.2.0 0.1.83 x86_64
=Sum: SBLIM Linux Sysfs Instrumentation for CMPI
+Des:
<!-- DT:Rich -->
<p>This package provides SBLIM instrumentation to expose the kernel
devices accessible via sysfs, which is a virtual filesystem in Linux kernel
versions 2.5+ that provides a tree of system devices.
The sysfs filesystem is mounted under /sys and the various
subdirectories of /sys represent the different classes of
devices currently registered on the machine.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-syslog 0.8.0 0.1.83 x86_64
=Sum: SBLIM Syslog Instrumentation
+Des:
<!-- DT:Rich -->
<p><li>Syslog Configuration Instrumentation
This instrumentation allows management of syslog configuration file via CIM.
</li><li>Syslog Service Instrumentation
This instrumentation allows to manage the syslog service via CIM.
</li><li>Syslog Logfile Instrumentation
This instrumentation allows viewing of syslog logfiles via CIM.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: sblim-indication_helper 0.4.2 129.17 x86_64
=Sum: Toolkit for CMPI Indication Providers
+Des:
<!-- DT:Rich -->
<p>This package contains a developer library for helping out when writing CMPI providers.
This library polls the registered functions for data and, if it changes, a CMPI indication is set with the values of the indication class properties (also set by the developer).
</p>
-Des:
##----------------------------------------
=Pkg: sblim-sfcb 1.3.11 0.13.27 x86_64
=Sum: Small Footprint CIM Broker
+Des:
<!-- DT:Rich -->
<p>Small Footprint CIM Broker (sfcb) is a CIM server conforming to the
CIM Operations over HTTP protocol.
It is robust, with low resource consumption and therefore specifically
suited for embedded and resource constrained environments.
sfcb supports providers written against the Common Manageability
Programming Interface (CMPI).
</p>
-Des:
##----------------------------------------
=Pkg: sblim-sfcc 2.2.1 0.4.6 x86_64
=Sum: Small Footprint CIM Client Library
+Des:
<!-- DT:Rich -->
<p>Small Footprint CIM Client Library (sfcc) Runtime Libraries
</p>
-Des:
##----------------------------------------
=Pkg: sblim-wbemcli 1.6.1 1.1.84 x86_64
=Sum: SBLIM WBEM Command Line Interface
+Des:
<!-- DT:Rich -->
<p>WBEM Command Line Interface is a standalone, command line WBEM client. It is
especially suited for basic systems management tasks as it can be used in
scripts.
</p>
-Des:
##----------------------------------------
=Pkg: scim 1.4.7 166.32.117 x86_64
=Sum: Smart Chinese/Common Input Method platform
+Des:
<!-- DT:Rich -->
<p>SCIM is a developing platform to significantly reduce the difficulty of
input method development.
</p>
-Des:
##----------------------------------------
=Pkg: scim-anthy 1.2.4 88.31 x86_64
=Sum: Anthy Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Anthy Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge 0.4.15 7.24.19 x86_64
=Sum: Scim Bridge
+Des:
<!-- DT:Rich -->
<p>Scim Bridge
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge-gtk 0.4.15 7.24.19 x86_64
=Sum: Scim Bridge for gtk2
+Des:
<!-- DT:Rich -->
<p>Scim Bridge for gtk2
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge-qt 0.4.15 7.24.19 x86_64
=Sum: Scim Bridge for Qt
+Des:
<!-- DT:Rich -->
<p>Scim Bridge for Qt
</p>
-Des:
##----------------------------------------
=Pkg: scim-canna 1.0.0 129.31 x86_64
=Sum: Canna Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Canna Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-chewing 0.3.1 133.31 x86_64
=Sum: chewing input method module for SCIM
+Des:
<!-- DT:Rich -->
<p>chewing input method module for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-hangul 0.3.2 1.32 x86_64
=Sum: Hangul Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Hangul Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-hangul-skim 0.3.2 1.32 x86_64
=Sum: skim setup module for scim-hangul
+Des:
<!-- DT:Rich -->
<p>skim setup module for scim-hangul
</p>
-Des:
##----------------------------------------
=Pkg: scim-input-pad 0.1.1 163.31 x86_64
=Sum: an onscreen input pad to easily input symbols
+Des:
<!-- DT:Rich -->
<p>an onscreen input pad to easily input symbols
</p>
-Des:
##----------------------------------------
=Pkg: scim-m17n 0.2.2 94.31 x86_64
=Sum: M17N Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>M17N Input Method Engine for SCIM
</p><p>
Supports all input methods offered by m17n-lib and m17n-db.
</p><p>
Currently the following languages are supported:
</p><p>
Amharic, Arabic, Armenian, Assamese, Bengali, Chinese, Croatian,
Devanagari, Dhivehi, Farsi, Georgian Greek, Gujarati, Hebrew,
Japanese, Kannada, Kazakh, Khmer, Korean, Lao, Malayalam, Myanmar,
Oriya, Punjabi, Russian, Serbian, Sinhala, Slovak, Syriac, Tamil,
Telugu, Thai, Tibetan, Vietnamese
</p><p>
Several generic input methods for languages based on the Latin
alphabet are also included.
</p>
-Des:
##----------------------------------------
=Pkg: scim-pinyin 0.5.91.20060705 160.33 x86_64
=Sum: Intelligent Pinyin input module for Smart Chinese/Common Input Method platform
+Des:
<!-- DT:Rich -->
<p>Intelligent Pinyin input module for Smart Chinese/Common Input Method platform
</p>
-Des:
##----------------------------------------
=Pkg: scim-pinyin-skim 0.5.91.20060705 160.33 x86_64
=Sum: skim setup module for scim-pinyin
+Des:
<!-- DT:Rich -->
<p>skim setup module for scim-pinyin
</p>
-Des:
##----------------------------------------
=Pkg: scim-qtimm 0.9.4 270.29 x86_64
=Sum: Qt input module plugin for SCIM
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-skk 0.5.2 156.31 x86_64
=Sum: SKK Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>SKK Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables 0.5.8 1.34.29 x86_64
=Sum: Data Files for SCIM Generic Table Input Method Module
+Des:
<!-- DT:Rich -->
<p>Data files for SCIM generic table input method module.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-additional 0.5.8 1.34.29 x86_64
=Sum: Input Method data for non-CJK languages, including Russian etc.
+Des:
<!-- DT:Rich -->
<p>Input Method data for non-CJK languages, including Russian etc.
for the scim-tables input method module.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-ja 0.5.8 1.34.29 x86_64
=Sum: SCIM Japanese Data Files
+Des:
<!-- DT:Rich -->
<p>This package includes the SCIM table IM data files in Japanese.
</p><p>
The data files come from UNICON.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-ko 0.5.8 1.34.29 x86_64
=Sum: SCIM Korean Data Files
+Des:
<!-- DT:Rich -->
<p>This package includes SCIM table IM data files in Korean.
</p><p>
The data files come from UNICON.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-skim 0.5.8 1.34.29 x86_64
=Sum: Skim setup module for scim-tables
+Des:
<!-- DT:Rich -->
<p>Skim setup module for scim-tables input method module.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-zh 0.5.8 1.34.29 x86_64
=Sum: SCIM Chinese Data Files
+Des:
<!-- DT:Rich -->
<p>This package includes SCIM table IM data files in Chinese.
</p><p>
The data files come from UNICON and XCIN.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tomoe 0.6.0 1.32 x86_64
=Sum: Tomoe Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Tomoe Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-uim 0.2.0 54.40 x86_64
=Sum: UIM Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>UIM Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scout 0.1.0 29.9.29 x86_64
=Sum: Package Scout
+Des:
<!-- DT:Rich -->
<p>Package Scout for indexing various properties of packages.
</p>
-Des:
##----------------------------------------
=Pkg: scpm 1.1.7 1.19 x86_64
=Sum: Správa profilů systémové konfigurace
+Des:
<!-- DT:Rich -->
<p>SCPM umožňuje vašemu systému ukládat různé verze konfigurací do
profilů. Můžete spustit počítač přímo do určitého profilu nebo se do
něj přepnout kdykoliv později. SCPM je následovníkem tzv. schémat.
</p>
-Des:
##----------------------------------------
=Pkg: screen 4.0.2 162.19.2.1 x86_64
=Sum: Více obrazovek na VT100/ANSI terminálu
+Des:
<!-- DT:Rich -->
<p>S tímto programem můžete využívat výhodu víceúlohových schopností
systému Linux otevřením několika sezení z jediného terminálu. Sezení
mohou být také odpojována a připojována z jiných přihlašovacích
terminálů.
</p><p>
Dokumentace je v manuálové stránce
</p>
-Des:
##----------------------------------------
=Pkg: scrollkeeper 0.3.14 227.16 x86_64
=Sum: Indexační systém pro dokumentaci
+Des:
<!-- DT:Rich -->
<p>ScrollKeeper je katalog pro dokumentaci. Takto je možné zpracovat metadata
(podle specifikace Open Source Metadata Framework (OMF)). Kromě toho má
ScrollKeeper k dispozici také jednoduché API, aby při hledání nápovědy
prohledávač našel katalog, uspořádal ho a mohl s ním pracovat.
</p><p>
</p><p>
Kromě toho bude možné komunikovat přes síť s katalogovým serverem, pokud
hledáte informace, které nejsou uloženy v lokálním systému.
</p>
-Des:
##----------------------------------------
=Pkg: scrollkeeper-lang 0.3.14 227.16 x86_64
=Sum: Indexační systém pro dokumentaci
+Des:
<!-- DT:Rich -->
<p>ScrollKeeper je katalog pro dokumentaci. Takto je možné zpracovat metadata
(podle specifikace Open Source Metadata Framework (OMF)). Kromě toho má
ScrollKeeper k dispozici také jednoduché API, aby při hledání nápovědy
prohledávač našel katalog, uspořádal ho a mohl s ním pracovat.
</p><p>
</p><p>
Kromě toho bude možné komunikovat přes síť s katalogovým serverem, pokud
hledáte informace, které nejsou uloženy v lokálním systému.
</p>
-Des:
##----------------------------------------
=Pkg: scsirastools 1.5.8 1.22 x86_64
=Sum: Dostupnost pro disky SCSI a pole
+Des:
<!-- DT:Rich -->
<p>Pevné disky jsou nejčastěji nahrazované součásti systému a během jejich
výměny dochází k nedostupnosti systému.  Root Disk Mirroring (RAID-1)
je technika využití nadbytečných disků pro uchování kopií dat tak, že
výpadek jednoho disku nezpůsobí ztrátu dat.
</p><p>
Projekt zahrnuje změny, které zvýší dostupnost, spolehlivost a
provozuschopnost (RAS) disků v Linuxu. Další cílem bylo vyvinutí
ovladačů pro hardware RAID řadiče.
</p><p>
Nástroje byly navrženy, aby zařízením SCSI zvýšili provozuschopnost
pod Linuxem tak, aby systém nebylo třeba rebootovat při každém
servisním zásahu. Projekt obsahuje nástroje pro uživatele a jádro.
</p><p>
sgraidmon - nástroj pro kontrolu software RAID disků pro výměnu za chodu;
Pamatujte, že používá raidtools jako např. mdadm pro změnu nastavení
nového disku
sgdefects - nástroj pro načtení seznamu chyb
sgdskfl - nástroj pro uložení firmware na disky SCSI; několik
vzorových firmware je uloženo v balíčku
sgmode - nástroj pro nastavení SCSI device mode pages; vzorové definice
mode page jsou zahrnuty v balíčku
sgdiag - nástroj pro diagnostikování a formátování
</p><p>
Patch scsiras nejsou zahrnuty v našem jádře.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse 2.28.1 0.1.156 x86_64
=Sum: GNOME2 interface for gnupg
+Des:
<!-- DT:Rich -->
<p>Seahorse is a gnome2 interface for gnupg.
It uses gpgme as the backend.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-lang 2.28.1 0.1.156 x86_64
=Sum: GNOME2 interface for gnupg
+Des:
<!-- DT:Rich -->
<p>Seahorse is a gnome2 interface for gnupg.
It uses gpgme as the backend.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-plugins 2.28.1 0.1.58 x86_64
=Sum: Plugins and utilities to integrate seahorse into the GNOME desktop environment
+Des:
<!-- DT:Rich -->
<p>Plugins and utilities to integrate seahorse into the GNOME desktop environment.
This package provides seahorse-agent and tools.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-plugins-applet 2.28.1 0.1.58 x86_64
=Sum: Plugins and utilities to integrate seahorse into the GNOME desktop environment
+Des:
<!-- DT:Rich -->
<p>Plugins and utilities to integrate seahorse into the GNOME desktop environment.
This package provides seahorse-agent and tools.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-plugins-gedit 2.28.1 0.1.58 x86_64
=Sum: Plugins and utilities to integrate seahorse into the GNOME desktop environment
+Des:
<!-- DT:Rich -->
<p>Plugins and utilities to integrate seahorse into the GNOME desktop environment.
This package provides seahorse-agent and tools.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-plugins-lang 2.28.1 0.1.58 x86_64
=Sum: Plugins and utilities to integrate seahorse into the GNOME desktop environment
+Des:
<!-- DT:Rich -->
<p>Plugins and utilities to integrate seahorse into the GNOME desktop environment.
This package provides seahorse-agent and tools.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-plugins-nautilus 2.28.1 0.1.58 x86_64
=Sum: Plugins and utilities to integrate seahorse into the GNOME desktop environment
+Des:
<!-- DT:Rich -->
<p>Plugins and utilities to integrate seahorse into the GNOME desktop environment.
This package provides seahorse-agent and tools.
</p>
-Des:
##----------------------------------------
=Pkg: sed 4.1.5 85.22 x86_64
=Sum: A Stream-Oriented Non-Interactive Text Editor
+Des:
<!-- DT:Rich -->
<p>Sed takes text input, performs one or more operations on it,
and outputs the modified text. Sed is typically used for extracting parts of a file using pattern matching or  for substituting multiple occurrences of a string within a file.
</p>
-Des:
##----------------------------------------
=Pkg: seed 2.28.1 0.1.70 x86_64
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: sensors 3.3.0 2.7.13 x86_64
=Sum: Sledování funkčnosti hardwaru
+Des:
<!-- DT:Rich -->
<p>This package includes programs that show data from some sensor chips.  The
interface /proc/bus/i2c/ is provided by loading kernel modules. Which modules to
load can be interactively detected as root by calling /usr/sbin/sensors-detect.
Warning, before using the sensors the default configuration in /etc/sensors.conf
has to be checked and changed to fit the actual set up of the mainboard and
the BIOS used on that specific mainboard!
</p>
-Des:
##----------------------------------------
=Pkg: setserial 2.17 716.22 x86_64
=Sum: Nástroje pro konfiguraci sériových portů
+Des:
<!-- DT:Rich -->
<p>Setserial je systémový nástroj pro nastavení sériového rozhraní a zobrazení
těchto nastavení. Slouží také pro změny I/O adresy a IRQ konkrétních zařízení.
</p>
-Des:
##----------------------------------------
=Pkg: sg3_utils 1.31 1.11.14 x86_64
=Sum: A collection of tools that send SCSI commands to devices
+Des:
<!-- DT:Rich -->
<p>The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. ATAPI cd/dvd drives and SATA disks that connect via a translation layer or a bridge device are examples of devices that use SCSI command sets.
</p>
-Des:
##----------------------------------------
=Pkg: sgmltool 1.0.9 1037.16 x86_64
=Sum: SGML nástroje - balíček pro formátování textů
+Des:
<!-- DT:Rich -->
<p>SGML-Tools je balíček nástrojů pro formátování textu založených na SGML
(Standard Generalized Markup Language). Umožňuje produkovat výstupy ve
formátu LaTeX, HTML, GNU info, LyX, RTF, i prostý text (pomocí groff)
z jediného zdrojového dokumentu.
</p><p>
</p><p>
Tento systém je šitý na míru vytváření technické softwarové dokumentace,
jejímž příkladem jsou linuxové dokumenty HOWTO. Měl by být užitečný pro
všechny druhy tištěné i elektronické dokumentace.
</p><p>
</p><p>
Tento balíček je považován za následníka balíčku Linuxdoc.
</p><p>
</p><p>
SGML-Tools nejsou schopny zpracovávat libovolné SGML dokumenty; v takovém
případě, zkuste jade_dsl a vytvořte si vlastní DSSSL skripty (můžete se
inspirovat balíčkem docbk30).
</p>
-Des:
##----------------------------------------
=Pkg: sgrep 1.92a 958.22 x86_64
=Sum: Hledání strukturovaných vzorků v souborech
+Des:
<!-- DT:Rich -->
<p>Sgrep je jako &quot;grep&quot;, ale umí pracovat se strukturami.
Program můžete použít k získání částí z SGML/XML
nebo jiných značkovaných textů (včetně v UTF-8).
</p>
-Des:
##----------------------------------------
=Pkg: shared-mime-info 0.51 14.8.32 x86_64
=Sum: Sdílená MIME databáze
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje:
Tento balíček obsahuje:<ul>
<li>Specifikaci sdílené MIME databáze freedesktop.org.
</li><li>Sloučené GNOME a KDE databáze v novém formátu.
</li><li>příkaz update-mime-database k instalaci nových MIME dat.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: sharutils 4.6.3 3.19 x86_64
=Sum: GNU shar programy
+Des:
<!-- DT:Rich -->
<p>This is the set of GNU shar utilities.
</p><p>
shar makes shell archives out of many files, preparing them for transmission by electronic mail services.  Use unshar to unpack shell archives after reception.
</p><p>
uuencode prepares a file for transmission over an electronic channel which ignores or otherwise mangles the eight bit (high order bit) of bytes.  uudecode does the converse transformation.
</p><p>
remsync allows for remote synchronization of directory trees, using e-mail.  This part of sharutils is still alpha.
</p>
-Des:
##----------------------------------------
=Pkg: silc-toolkit 1.1.7 7.23.2 x86_64
=Sum: Secure Internet Live Conferencing Software Development Toolkit
+Des:
<!-- DT:Rich -->
<p>SILC Toolkit is a software development toolkit which provides full SILC protocol implementation for application developers. The SILC Toolkit provides SILC Client Library, SILC Protocol Core Library, SILC Key Exchange Library, SILC Crypto Library, SILC Math Library, SILC Utility Library, as well as other libraries. The SILC Toolkit also includes a full reference manual and developer guide with examples and tutorials.
</p><p>
SILC (Secure Internet Live Conferencing) is a protocol which provides secure conferencing services on the Internet over insecure channels.
SILC is similar to IRC, as they both provide conferencing services and almost have the same commands.
However, they differ internally: unlike IRC, SILC is secure and has an entirely different compared to IRC.
</p>
-Des:
##----------------------------------------
=Pkg: simias 1.8.3.10050.1 0.3.46 x86_64
=Sum: Collection-Oriented Data Storage
+Des:
<!-- DT:Rich -->
<p>Simias is a technology that will allow various types of data to be stored and related in what is known as a collection.  Initially Simias is the underlying data store for the iFolder project, although it has potential to do much more.
</p>
-Des:
##----------------------------------------
=Pkg: simple-ccsm 0.7.8 12.22 x86_64
=Sum: Simple Settings Manager for Compiz
+Des:
<!-- DT:Rich -->
<p>Compiz settings manager focused on simplicity and aimed at end users.
</p>
-Des:
##----------------------------------------
=Pkg: simple-ccsm-kde 1.0 9.37 x86_64
=Sum: KDE Simple Settings Manager for Compiz
+Des:
<!-- DT:Rich -->
<p>Compiz settings manager for KDE focused on simplicity and aimed at end users.
</p>
-Des:
##----------------------------------------
=Pkg: sisctrl 0.0.20051202 31.16 x86_64
=Sum: SiS Display Control Panel
+Des:
<!-- DT:Rich -->
<p>Utility to set some display properties during server runtime.
</p>
-Des:
##----------------------------------------
=Pkg: skanlite 0.2 3.33 x86_64
=Sum: Scanner Front-End
+Des:
<!-- DT:Rich -->
<p>Skanlite is a KDE front-end for the sane scanner library.
</p>
-Des:
##----------------------------------------
=Pkg: skim 1.4.5 259.33 x86_64
=Sum: KDE integration for SCIM
+Des:
<!-- DT:Rich -->
<p>KDE integration for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-anthy 1.2.2 2.21 x86_64
=Sum: SKIM setup module for scim-anthy
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-anthy
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-canna 1.0.0 2.21 x86_64
=Sum: SKIM setup module for scim-canna
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-canna
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-skk 0.5.2.1 51.21 x86_64
=Sum: SKIM setup module for scim-skk
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-skk
</p>
-Des:
##----------------------------------------
=Pkg: slang 2.1.1 58.18 x86_64
=Sum: Knihovna pro ovládání displeje
+Des:
<!-- DT:Rich -->
<p>Knihovna funkcí pro práci s displejem. Podobá se knihovně ncurses,
ale má své vlastní programové rozhraní. Slang používá databázi
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: slang-32bit 2.1.1 58.18 x86_64
=Sum: Knihovna pro ovládání displeje
+Des:
<!-- DT:Rich -->
<p>Knihovna funkcí pro práci s displejem. Podobá se knihovně ncurses,
ale má své vlastní programové rozhraní. Slang používá databázi
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: sled-release 11.2 1.193 x86_64
=Sum: Poznámky k vydání SUSE Linux Desktopu
+Des:
<!-- DT:Rich -->
<p>Poznámky k verzi SuSE Linux desktopu.
</p>
-Des:
##----------------------------------------
=Pkg: sled-release-DVD 11.2 1.193 x86_64
=Sum: Poznámky k vydání SUSE Linux Desktopu
+Des:
<!-- DT:Rich -->
<p>Poznámky k verzi SuSE Linux desktopu.
</p>
-Des:
##----------------------------------------
=Pkg: smartmontools 5.38.0.20081027 2.16.2.1 x86_64
=Sum: Monitorování S.M.A.R.T. disků a zařízení
+Des:
<!-- DT:Rich -->
<p>SMARTmontools controls and monitors storage devices using the
Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.)
built into ATA, SATA and SCSI Hard Drives.
This is used to check the hard drive reliability and to predict drive failures. The suite contains
two utilities.
The first, smartctl, is a command line utility designed to perform simple S.M.A.R.T. tasks.
The second, smartd, is a daemon that periodically monitors the smart status and reports errors to syslog.
The package is compatible with the ATA/ATAPI-3 to -7 specification.
The package is intended to incorporate as much &quot;vendor specific&quot; and
&quot;reserved&quot; information as possible about disk drives. The commands
man smartctl and man smartd will provide more information.
</p>
-Des:
##----------------------------------------
=Pkg: smis-providers 1.0.0 10.36.202 x86_64
=Sum: SMI-S providers for Volume Management & Snapshot
+Des:
<!-- DT:Rich -->
<p>The smis-providers contains the providers to instrument the Volumes &amp; Snapshots on the Linux filesystem. These are based on SNIA&#39;s SMI-S Volume Management profile &amp; Copy Services profile respectively
</p>
-Des:
##----------------------------------------
=Pkg: smpppd 1.59_SVN31 2.21.86 x86_64
=Sum: SuSE Meta PPP démon
+Des:
<!-- DT:Rich -->
<p>SuSE meta PPP démon je back-endem pro kinternet. Je vyžadován pro
připojení s modemem, ISDN nebo DSL. 
</p>
-Des:
##----------------------------------------
=Pkg: smt-client 0.0.16 0.5.1 x86_64
=Sum: Subscription Management Tool
+Des:
<!-- DT:Rich -->
<p>This package provide everything you need to get a local NU and
registration proxy.
</p>
-Des:
##----------------------------------------
=Pkg: snapper 0.0.7 0.21.40 x86_64
=Sum: Tool for filesystem snapshot management
+Des:
<!-- DT:Rich -->
<p>This package contains snapper, a tool for filesystem snapshot management.
</p>
-Des:
##----------------------------------------
=Pkg: snapper-zypp-plugin 0.0.7 0.21.40 x86_64
=Sum: Plugin for zypp for calling snapper
+Des:
<!-- DT:Rich -->
<p>This package contains a plugin for zypp that makes snapshots with snapper
during commits.
</p>
-Des:
##----------------------------------------
=Pkg: snmp-mibs 5.4.2.1 8.12.6.1 x86_64
=Sum: MIB files from net-snmp
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p><p>
</p><p>
This package holds the MIB files from the net-snmp package.
</p>
-Des:
##----------------------------------------
=Pkg: socat 1.7.0.0 1.14 x86_64
=Sum: Multipurpose relay for bidirectional data transfer
+Des:
<!-- DT:Rich -->
<p>socat is a relay for bidirectional data transfer between two independent data
channels. Each of these data channels may be a file, pipe, device (serial line
etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an SSL
socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU line
editor, a program, or a combination of two of these.
</p>
-Des:
##----------------------------------------
=Pkg: soprano 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is an open and pluggable RDF resource framework which is build on top of QT4. It provides RDF storage, RDF parsing, serialization, inference, and full text indexing in a nice C++ API.
The main target of Soprano are desktop applications as it is being developed as a subroject of Nepomuk, the semantic desktop initiative.
</p>
-Des:
##----------------------------------------
=Pkg: soprano-backend-redland 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is a RDF QT/C++ interface library using redland as a backend
</p>
-Des:
##----------------------------------------
=Pkg: sound-juicer 2.28.1 1.2.66 x86_64
=Sum: Clean and Lean GNOME CD Ripper
+Des:
<!-- DT:Rich -->
<p>GStreamer-based CD ripping tool. Saves audio CDs to Ogg/vorbis.
</p>
-Des:
##----------------------------------------
=Pkg: sound-juicer-lang 2.28.1 1.2.66 x86_64
=Sum: Clean and Lean GNOME CD Ripper
+Des:
<!-- DT:Rich -->
<p>GStreamer-based CD ripping tool. Saves audio CDs to Ogg/vorbis.
</p>
-Des:
##----------------------------------------
=Pkg: soundtouch 1.6.0 1.5.18 x86_64
=Sum: Audio Processing Library
+Des:
<!-- DT:Rich -->
<p>SoundTouch is an open source audio processing library that allows changing the sound tempo, pitch and playback rate parameters independently from each other.
</p>
-Des:
##----------------------------------------
=Pkg: spacewalksd 4.9.7 0.11.1 x86_64
=Sum: Red Hat Network query daemon
+Des:
<!-- DT:Rich -->
<p>The Red Hat Update Agent that automatically queries the Red Hat
Network servers and determines which packages need to be updated on
your machine, and runs any actions.
</p>
-Des:
##----------------------------------------
=Pkg: spamassassin 3.3.1 10.8.3 x86_64
=Sum: SpamAssassin je rozšiřující poštovní filtr pracující jako spamový filtr
+Des:
<!-- DT:Rich -->
<p>Spamassassin je program pro příkazovou řádku, který rozhodne, zda je mail
spam nebo ne. Filtrovací pravidla na MUA (Mail User Agent, your mail program)
nebo LDA (Local Delivery Agent) můžete nastavit podle vlastních potřeb.
</p><p>
Více informací o používání najdete v adresáři
/usr/share/doc/packages/spamassassin/
</p>
-Des:
##----------------------------------------
=Pkg: speechd 0.6.7 4.29 x86_64
=Sum: speech-dispatcher - speech server
+Des:
<!-- DT:Rich -->
<p>speech-dispatcher is able to manage different TTS-systems like
espeak, festival, ibmtts.
speech-dispatcher provides a generic interface
to control TTS-systems.
</p>
-Des:
##----------------------------------------
=Pkg: splashy 0.3.8 106.21 x86_64
=Sum: A complete user-space boot splash system
+Des:
<!-- DT:Rich -->
<p>Splashy is a next generation boot splashing system for Linux systems. Unlike other splashing systems, it needs no patches to the kernel and its installed like a normal package. Make your boot process eye-candy with Splashy!
</p><p>
Some of Splashys most noticeable features include:
<ul>
<li>Require zero kernel patches/full functionality in user-space
</li><li>Boot/halt/reboot/runlevel-switch support
</li><li>Progressbar support (with optional border)
</li><li>Verbose mode (with F2/ESC keys)
</li><li>Configuration file in XML
</li><li>Cope with any video-mode resolution/size
</li><li>Cope with 8, 16, and 24 bit framebuffers
</li><li>Alpha channel (transparency) support
</li><li>Video mode detection
</li><li>Initramfs support
</li><li>TrueType2 fonts support
</li><li>Lots of image/animation file formats supported: jpg, png, gif, mpg, swf
</li><li>Low dependencies and code in C to best perform
</li><li>Full LSB support
</li><li>Multiple themes support
</li><li>Really easy to create new themes
</li><li>X detection on exit
</li><li>Smooth progressbar movement
</li><li>Animations support
</li><li>Fade in/out effects
</li><li>Totally configurable
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: splashy-branding-SLED 0.3.8 106.21 x86_64
=Sum: Splashy branding for SLED
+Des:
<!-- DT:Rich -->
<p>Splashy branding for SLED
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2 2.8.17 134.12 x86_64
=Sum: Připojitelná podpora SQL
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2-32bit 2.8.17 134.12 x86_64
=Sum: Připojitelná podpora SQL
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite3 3.7.6.3 1.4.4.1 x86_64
=Sum: Připojitelná podpora SQL
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is a server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: squashfs 4.0 1.15.1 x86_64
=Sum: A Read-Only File System with Efficient Compression
+Des:
<!-- DT:Rich -->
<p>This package contains the userland utilities to create and read squashfs images.
</p>
-Des:
##----------------------------------------
=Pkg: src_vipa 2.0.4 1.21 x86_64
=Sum: Podpora pro Virtual Source IP na HA systémech
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje velmi flexibilní prostředek pro výběr zdrojové
IP adresy pro libovolnou aplikaci.
To je užitečné pro systémy se zaměřením na vysokou dostupnost
 (high availability setups), kde &quot;dummy&quot; zařízení pracuje s &quot;VIPA&quot; (virtual IP address).
Přečtěte si prosím /usr/share/doc/packages/src_vipa/README
a manovou stránku src_vipa.
</p>
-Des:
##----------------------------------------
=Pkg: sreadahead 1.0 2.7.11 x86_64
=Sum: Super Readahead
+Des:
<!-- DT:Rich -->
<p>sreadahead speeds up booting by pre-reading disk blocks used during
previous boots.
</p>
-Des:
##----------------------------------------
=Pkg: sssd 1.5.11 0.9.96 x86_64
=Sum: System Security Services Daemon
+Des:
<!-- DT:Rich -->
<p>Provides a set of daemons to manage access to remote directories and
authentication mechanisms. It provides an NSS and PAM interface toward
the system and a pluggable backend system to connect to multiple different
account sources. It is also the basis to provide client auditing and policy
services for projects like FreeIPA.
</p>
-Des:
##----------------------------------------
=Pkg: sssd-32bit 1.5.11 0.9.96 x86_64
=Sum: System Security Services Daemon
+Des:
<!-- DT:Rich -->
<p>Provides a set of daemons to manage access to remote directories and
authentication mechanisms. It provides an NSS and PAM interface toward
the system and a pluggable backend system to connect to multiple different
account sources. It is also the basis to provide client auditing and policy
services for projects like FreeIPA.
</p>
-Des:
##----------------------------------------
=Pkg: sssd-tools 1.5.11 0.9.96 x86_64
=Sum: Commandline tools for sssd
+Des:
<!-- DT:Rich -->
<p>The packages contains commandline tools for managing users and groups using
the &quot;local&quot; id provider of the System Security Services Daemon (sssd).
</p>
-Des:
##----------------------------------------
=Pkg: star 1.5final 28.21.1 x86_64
=Sum: POSIX.1-2001-Compliant Tar Implementation
+Des:
<!-- DT:Rich -->
<p>Star is a tar like archiver. TAR stands for Tape ARchiver.
Star is the fastest known implementation of a tar archiver.
</p><p>
Features:
<ul>
<li>FIFO to keep the tape streaming.
</li><li>remote tape support.
</li><li>accurate sparse files (if the OS supports it).
</li><li>pattern matcher to archive and extract a subset of files.
</li><li>user tailorable interface for comparing tar archives
against file trees.
</li><li>path names up to 1024 Bytes may be archived.
</li><li>stores and restores all 3 file times (even creation time).
With POSIX.1-2001 the times are in nanosecond granularity.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: startup-notification 0.9 60.13 x86_64
=Sum: Referenční implementace protokolu Startup-Notification
+Des:
<!-- DT:Rich -->
<p>Startup-notification obsahuje referenční implementaci protokolu startup-notification.
</p>
-Des:
##----------------------------------------
=Pkg: startup-notification-32bit 0.9 60.13 x86_64
=Sum: Referenční implementace protokolu Startup-Notification
+Des:
<!-- DT:Rich -->
<p>Startup-notification obsahuje referenční implementaci protokolu startup-notification.
</p>
-Des:
##----------------------------------------
=Pkg: statserial 1.1 715.22 x86_64
=Sum: Program pro ladění sériových linek
+Des:
<!-- DT:Rich -->
<p>Statserial zobrazuje tabulku signálů na standardním devíti nebo
pětadvacetikolíkovém rozhraní sériového portu a ukazuje stav řídicích
signálů. Může být užitečný pro ladění problémů se sériovými porty nebo
modemy.
</p>
-Des:
##----------------------------------------
=Pkg: strace-32bit 4.5.18 10.20.1 x86_64
=Sum: Program pro sledování systémových volání programů
+Des:
<!-- DT:Rich -->
<p>Pomocí strace můžete sledovat aktivity programu. Například informace o
systémových voláních nebo přijatých a odeslaných signálech. Sledovat
můžete i potomky procesu.
</p>
-Des:
##----------------------------------------
=Pkg: strace 4.5.18 10.20.1 x86_64
=Sum: Program pro sledování systémových volání programů
+Des:
<!-- DT:Rich -->
<p>Pomocí strace můžete sledovat aktivity programu. Například informace o
systémových voláních nebo přijatých a odeslaných signálech. Sledovat
můžete i potomky procesu.
</p>
-Des:
##----------------------------------------
=Pkg: strigi 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: strongswan 4.4.0 6.11.1 x86_64
=Sum: StrongSwan -- OpenSource IPsec-based VPN Solution
+Des:
<!-- DT:Rich -->
<p>StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
<ul>
<li>runs both on Linux 2.4 (KLIPS IPsec) and Linux 2.6 (NETKEY IPsec) kernels
</li><li>implements both the IKEv1 and IKEv2 (RFC 4306) key exchange protocols
</li><li>NEW: Fully tested support of IPv6 IPsec tunnel connections
</li><li>Dynamical IP address and interface update with IKEv2 MOBIKE (RFC 4555)
</li><li>Fast connection startup and periodic update using ipsec starter
</li><li>Automatic insertion and deletion of IPsec policy based firewall rules
</li><li>Strong 3DES, AES, Serpent, Twofish, or Blowfish encryption
</li><li>NAT-Traversal via UDP encapsulation and port floating (RFC 3947)
</li><li>Static Virtual IPs and IKE Mode Config Pull and Push modes
</li><li>XAUTH server and client functionality on top of IKE Main Mode authentication
</li><li>Dead Peer Detection (DPD, RFC 3706) takes care of dangling tunnels
</li><li>Authentication based on X.509 certificates or preshared keys
</li><li>Generation of a default self-signed certificate during first strongSwan startup
</li><li>Retrieval and local caching of Certificate Revocation Lists via HTTP or LDAP
</li><li>Full support of the Online Certificate Status Protocol (OCSP, RCF 2560).
</li><li>CA management (OCSP and CRL URIs, default LDAP server)
</li><li>Powerful IPsec policies based on wildcards or intermediate CAs
</li><li>Group policies based on X.509 attribute certificates ( RFC 3281)
</li><li>Optional storage of RSA private keys and certificates on a smartcard
</li><li>Smartcard access via standardized PKCS #11 interface
</li><li>PKCS #11 proxy function offering RSA decryption services via whack
</li><li>NEW: strongSwan Manager - a graphical management interface for IKEv2
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: strongswan-doc 4.4.0 6.11.1 x86_64
=Sum: StrongSwan -- OpenSource IPsec-based VPN Solution
+Des:
<!-- DT:Rich -->
<p>StrongSwan is an OpenSource IPsec-based VPN Solution for Linux
</p><p>
This package provides the StrongSwan documentation.
</p>
-Des:
##----------------------------------------
=Pkg: sudo 1.7.6p2 0.2.4.1 x86_64
=Sum: Spouští programy jako root
+Des:
<!-- DT:Rich -->
<p>Sudo je program, který umožňuje uživatelům spouštět některé příkazy
jako root. Soubor /etc/sudoers (lze editovat pomocí visudo) stanovuje, kteří
uživatelé mají přístup k sudo a jaké programy smějí spouštět. Sudo zaznamenává
své veškeré činnosti do syslogd, takže administrátor má o provedených operacích\ přehled.
</p>
-Des:
##----------------------------------------
=Pkg: sumf 0.2.4 192.53.27 x86_64
=Sum: SCPM univerzální frontend pro správu
+Des:
<!-- DT:Rich -->
<p>SUMF is a graphical front-end to SCPM (System Configuration Profile Management).
</p>
-Des:
##----------------------------------------
=Pkg: suseRegisterInfo 1.2.0 0.7.1 x86_64
=Sum: Tool to get informations from the local system
+Des:
<!-- DT:Rich -->
<p>This tool read data from the local system required
for a registration
</p>
-Des:
##----------------------------------------
=Pkg: suspend 0.80.20081103 1.52.1 x86_64
=Sum: A Set Of Tools To Support Sleep Modes
+Des:
<!-- DT:Rich -->
<p>A set of tools to support suspending notebooks, working around the
specific problems each machine has.
</p>
-Des:
##----------------------------------------
=Pkg: sysconfig 0.71.47 0.7.1 x86_64
=Sum: Schéma sysconfig - konfigurace systému
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje schéma konfigurace systému SuSE.
</p>
-Des:
##----------------------------------------
=Pkg: sysfsutils 2.1.0 102.25.1 x86_64
=Sum: System Utilities Package / Libsysfs
+Des:
<!-- DT:Rich -->
<p>This package&#39;s purpose is to provide a library for interfacing with the kernel&#39;s sys filesystem mounted at /sys. The libray was an attempt to create a stable interface to sysfs, but it failed. It is still provided for the current users, but no new software should use this library.
</p>
-Des:
##----------------------------------------
=Pkg: sysfsutils-32bit 2.1.0 102.25.1 x86_64
=Sum: System Utilities Package / Libsysfs
+Des:
<!-- DT:Rich -->
<p>This package&#39;s purpose is to provide a library for interfacing with the kernel&#39;s sys filesystem mounted at /sys. The libray was an attempt to create a stable interface to sysfs, but it failed. It is still provided for the current users, but no new software should use this library.
</p>
-Des:
##----------------------------------------
=Pkg: syslinux 3.82 8.5.67 x86_64
=Sum: Zavaděč operačního systému Linux
+Des:
<!-- DT:Rich -->
<p>SYSLINUX je zavaděč operačního systému Linux, který se spouští
ze souborového systému MS-DOS a Windows FAT.
Je určen ke zjednodušení první instalace Linuxu a pro vytváření
záchranných a jiných speciálních zaváděcích disků.
</p>
-Des:
##----------------------------------------
=Pkg: syslog-ng 2.0.9 27.32.1 x86_64
=Sum: The new-generation syslog-daemon
+Des:
<!-- DT:Rich -->
<p>syslog-ng is a &quot;new-generation&quot; syslogd (replacement)  for Unix
and Unix-like systems. It tries to fill the gaps in the original
syslogd:
<ul>
<li>powerful configurability
</li><li>filtering based on message content
</li><li>portability
</li><li>better network forwarding
</li></ul>
This package contains Novell/SUSE specific modifications / extensions,
please report problems using Bugzilla at https://bugzilla.novell.com/
before you contact the authors.
</p><p>
The official home page of syslog-ng is:
http://www.balabit.com/network-security/syslog-ng/
</p>
-Des:
##----------------------------------------
=Pkg: sysstat 8.1.5 7.32.1 x86_64
=Sum: Příkazy sar a iostat pro Linux
+Des:
<!-- DT:Rich -->
<p>Příkazy sar a iostat pro Linux.
Příkaz sar shromažďuje a oznamuje informace o aktivitách systému.
Příkaz iostat zobrazuje statistiky o využití procesoru, zařízení tty a disků.
Informace shromážděné programy sar a iostat mohou být uloženy do
binárního souboru. Oba příkazy nyní při zobrazování zatížení procesoru
podporují SMP stroje.
</p>
-Des:
##----------------------------------------
=Pkg: system-config-printer 1.0.8 9.16.1 x86_64
=Sum: A printer administration tool
+Des:
<!-- DT:Rich -->
<p>system-config-printer is a graphical user interface that allows
the user to configure a CUPS print server.
</p>
-Des:
##----------------------------------------
=Pkg: system-config-printer-lang 1.0.8 9.16.1 x86_64
=Sum: A printer administration tool
+Des:
<!-- DT:Rich -->
<p>system-config-printer is a graphical user interface that allows
the user to configure a CUPS print server.
</p>
-Des:
##----------------------------------------
=Pkg: sysvinit 2.86 210.1 x86_64
=Sum: Inicializace systému ve stylu SysV
+Des:
<!-- DT:Rich -->
<p>Inicializační programy od Miquela van Smoorenburga ve stylu System V.
Tyto programy kontrolují zavádění a ukončování systému. Podporují mnoho
systémových úrovní, každá je spojena se specifickými programy. Například
úroveň 3 startuje getty na konzolích tty1-tty6. ˇúroveň 5 spouští xdm.
Úroveň 0 zastaví systém.
Pro získání více informací nahlédněte do manuálových stránek jednotlivých programů:
inittab, initscript, halt, init, killproc, killall5, powerd, reboot, runlevel, shutdown a telinit.
</p>
-Des:
##----------------------------------------
=Pkg: t1lib 5.1.1 100.19.1 x86_64
=Sum: Adobe Type 1 Font rastrová knihovna
+Des:
<!-- DT:Rich -->
<p>T1lib je knihovna pod GPL, která se používá při generování obrázků
a jejich sad z Adobe Type 1 fontů v UNIXu. T1lib používá velkou část
kódu z X11 od IBM, ale jsou odstraněny některé nevýhody rastrování.
</p>
-Des:
##----------------------------------------
=Pkg: taglib 1.5 19.21 x86_64
=Sum: C++ knihovna pro parsování metadat v souborech
+Des:
<!-- DT:Rich -->
<p>libtag provides a C++ interface for reading additional data (stored in TAGs) from MP3, Ogg Vorbis, and MPEG files.
</p>
-Des:
##----------------------------------------
=Pkg: taglib-32bit 1.5 19.21 x86_64
=Sum: C++ knihovna pro parsování metadat v souborech
+Des:
<!-- DT:Rich -->
<p>libtag provides a C++ interface for reading additional data (stored in TAGs) from MP3, Ogg Vorbis, and MPEG files.
</p>
-Des:
##----------------------------------------
=Pkg: tar 1.26 1.2.4.1 x86_64
=Sum: GNU implementation of tar ((t)ape (ar)chiver)
+Des:
<!-- DT:Rich -->
<p>This package normally also includes the program &quot;rmt&quot;, which provides remote tape drive control. Since there are compatible versions of &#39;rmt&#39; in either the &#39;star&#39; package or the &#39;dump&#39; package, we didn&#39;t put &#39;rmt&#39; into this package. If you are planning to use the remote tape features provided by tar you have to also install the &#39;dump&#39; or the &#39;star&#39; package.
</p>
-Des:
##----------------------------------------
=Pkg: tcl 8.5.5 2.81 x86_64
=Sum: Skriptovací jazyk Tcl
+Des:
<!-- DT:Rich -->
<p>Tcl (Tool Command Language) je velmi jednoduchý programovací jazyk.
Poskytuje základní vlastnosti jako proměnné, porcedury a ovládání. Běží
na téměř všech moderních OS, jako jsou Unix, Macintosh a Windows 95/98/NT.
Klíčovou vlastností Tcl je jeho rozšiřitelnost.
</p><p>
Více informací o Tcl najdete na http://www.tcl.tk a http://wiki.tcl.tk
</p>
-Des:
##----------------------------------------
=Pkg: tcpd-32bit 7.6 856.13 x86_64
=Sum: Bezpečnostní obal pro TCP démony
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje malého démona, který monitoruje a 
filtruje přicházející žádosti na služby finger, ftp, telnet, rlogin,
rsh, exec, tftp, talk a další síťové služby.
</p>
-Des:
##----------------------------------------
=Pkg: tcpd 7.6 856.13 x86_64
=Sum: Bezpečnostní obal pro TCP démony
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje malého démona, který monitoruje a 
filtruje přicházející žádosti na služby finger, ftp, telnet, rlogin,
rsh, exec, tftp, talk a další síťové služby.
</p>
-Des:
##----------------------------------------
=Pkg: tcpdump 3.9.8 1.21 x86_64
=Sum: Zachycovač paketů
+Des:
<!-- DT:Rich -->
<p>S tímto programem můžete &quot;číst&quot; všechny nebo pouze určité pakety v síti
ethernet. Může být používán pro odstraňování specifických problémů se sítí.
</p>
-Des:
##----------------------------------------
=Pkg: tcsh 6.15.00 93.33.1 x86_64
=Sum: Vylepšený shell csh
+Des:
<!-- DT:Rich -->
<p>Tcsh je vylepšená, ale zcela kompatibilní verze Berkeley-unixového
C-shellu, csh(1). Jedná se o interpret příkazů použitelný jako
interaktivní přihlašovací shell i jako interpret shellových skriptů.
Syntaxe příkazů se podobá jazyku C. Obsahuje editor příkazových řádků,
programovatelné doplňování konců slov, korektor překlepů, mechanismus
historie a řízení úloh.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-gabble 0.7.10 2.17 x86_64
=Sum: XMPP connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>Gabble is a Jabber/XMPP connection manager for the Telepathy framework, currently supporting single user chats, multi user chats and voice/video calls. Install this package to use Telepathy instant messaging clients with Jabber/XMPP servers, including Google Talk.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-haze 0.3.2 1.1.182 x86_64
=Sum: A libpurple connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>A connection manager for Telepathy that provide support for AIM, ICQ, MSN, Yahoo! and Groupwise using Pidgin&#39;s libpurple.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-idle 0.1.5 1.1.64 x86_64
=Sum: IRC support for Telepathy
+Des:
<!-- DT:Rich -->
<p>Telepathy idle provide IRC support the Telepathy.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-mission-control 5.2.6 0.2.141 x86_64
=Sum: Telepathy Mission Control instant messaging connection manager
+Des:
<!-- DT:Rich -->
<p>Mission Control, or MC, is a Telepathy component providing a way for
&quot;end-user&quot; applications to abstract some of the details of connection
managers, to provide a simple way to manipulate a bunch of connection
managers at once, to remove the need to have in each program the account
definitions and credentials, to manage channel handling/request and to
manage presence statuses.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-salut 0.3.10 1.1.220 x86_64
=Sum: Link-local XMPP connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>A connection manager for Telepathy that implement peer to peer XMPP using local-link as done by and compatible with Apple Bonjour(tm) chat.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-stream-engine 0.5.11 1.1.151 x86_64
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Stream Engine is a Telepathy client that uses Farsight and GStreamer to handle
media streaming channels. It&#39;s used as a background process by other Telepathy
clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: telnet 1.2 134.22 x86_64
=Sum: Klient pro protokol telnet
+Des:
<!-- DT:Rich -->
<p>Telnet je starý protokol pro přihlašování se ke vzdáleným
počítačům. Nyní již většinou není používán, protože data při jeho
přenosu nejsou šifrována (telnet byl nahrazen bezpečnějším ssh).  Bývá
však používán při vyhledávání chyb v jiných síťových
klientech. Např. příkazem:
</p><p>
telnet localhost 25
</p><p>
se připojíte na lokální SMTP server.
</p>
-Des:
##----------------------------------------
=Pkg: termcap 2.0.8 981.18 x86_64
=Sum: Knihovna termcap
+Des:
<!-- DT:Rich -->
<p>Knihovna termcap
</p>
-Des:
##----------------------------------------
=Pkg: termcap-32bit 2.0.8 981.18 x86_64
=Sum: Knihovna termcap
+Des:
<!-- DT:Rich -->
<p>Knihovna termcap
</p>
-Des:
##----------------------------------------
=Pkg: terminfo 5.6 90.55 x86_64
=Sum: Databáze popisů terminálů
+Des:
<!-- DT:Rich -->
<p>This is the terminfo reference database, maintained in the ncurses package.
This database is the official successor to the 4.4BSD termcap file and
contains information about any known terminal. The ncurses library makes
use of this database to use terminals correctly. If you
just use the Linux console, xterm, and VT100, you probably will not need
this database -- a minimal /usr/share/terminfo tree for these terminals is
already included in the terminfo-base package.
</p>
-Des:
##----------------------------------------
=Pkg: terminfo-base 5.6 90.55 x86_64
=Sum: Databáze popisů terminálů
+Des:
<!-- DT:Rich -->
<p>This is the terminfo basic database, maintained in the ncurses
package. This database is the official successor to the 4.4BSD termcap
file and contains information about any known terminal. The ncurses
library makes use of this database to use terminals correctly.
</p>
-Des:
##----------------------------------------
=Pkg: testgart 0.1 190.8 x86_64
=Sum: Program pro otestování podpory AGPGART
+Des:
<!-- DT:Rich -->
<p>Pomocí testgart můžete zkontrolovat zda váš systém má podporu agpgart.
</p>
-Des:
##----------------------------------------
=Pkg: texinfo 4.12 1.86 x86_64
=Sum: Nástroje potřebné pro vytvoření dokumentace ze zdroje Texinfo
+Des:
<!-- DT:Rich -->
<p>Texinfo je dokumentační systém, který používá jediný zdrojový soubor na
vytvoření online dokumentace i tištěného výstupu. S použitím Texinfo
můžete vytvořit tištěný dokument, který je stejně jako normální kniha
členěn na kapitoly, podkapitoly, apod., obsahuje křížové reference a
indexy. Ze stejného zdrojového souboru pro Texinfo můžete vytvořit
elektronický dokument obsahující menu, křížové reference a indexy,
který bude strukturovaný na uzly.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin 2007 219.34.6 x86_64
=Sum: The Base System of TeXLive
+Des:
<!-- DT:Rich -->
<p>After installing texlive and the package texlive-latex, find a large
selection of documentation for TeX, LaTeX, and various layout styles
in /usr/share/texmf/doc.
</p><p>
TeX (pronounced tech) is an interpreter for text formatting and was
developed by Donald E. Knuth.  It works with control and macro commands
on a text file. Working with TeX is similar to typesetting methods.
LaTeX is a complex macro package that removes the cryptical TeX
interface and does most of the work for the user.
</p><p>
TeX uses special fonts produced by the MetaFont program. Various
printer drivers and an X11 viewer are also included in this package.
The teTeX package is based on the standard TeX package of Karl Berry,
which makes configuration much easier. It is also possible to use
PostScript fonts. A real PostScript printer is required, however. If
the ghostscript (gs) package is installed, all drivers for printing and
viewing can use these fonts. Note, however, that the fonts included in
the ghostscript package are not identical to Adobe&#39;s PostScript fonts.
The copyright prohibits us to include them on the CD.
</p><p>
Besides these features, the programs MakeIndex (for producing
indexes) and BibTeX (for literature data processing) exist.
</p><p>
The texlive package includes a full texmf tree, many programs like
tex, dvips, etc., shell script configuration, and a big collection
of documentations. This package is simply configured by the script
texconfig and has multilanguage options.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-cjk 2007 219.34.6 x86_64
=Sum: LaTeXové makro pro CJK (čínština/japonština/korejština)
+Des:
<!-- DT:Rich -->
<p>CJK je balík maker pro LaTeX umožňující sazbu čínštiny, japonštiny a
korejštiny. Podporuje různé CJK kódování Big5, GB, JIS, KS, CNS.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-jadetex 2007 219.34.6 x86_64
=Sum: TeXový procesor pro OpenJade
+Des:
<!-- DT:Rich -->
<p>With Sebastian Rahtz&#39;s macro package jadetex, it is possible to process
the output of the TeX back-end for OpenJade and produce DVI or PDF
files. Resulting DVI files are viewable with xdvi or printable like
any other DVI file.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-latex 2007 219.34.6 x86_64
=Sum: Vše o LaTeX
+Des:
<!-- DT:Rich -->
<p>This package provides LaTeX. To be exact, LaTeX2e, and a huge amount
software for LaTeX.  This package is required by most (La)TeX
documents.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-tools 2007 219.34.6 x86_64
=Sum: Utilities like DviToDvi, DeTeX, and LaCheck
+Des:
<!-- DT:Rich -->
<p>The DeTeX filter removes TeX and LaTeX macros.
</p><p>
The LaCheck utility is a syntax checker for LaTeX documents.
</p><p>
The DviToDvi utilities are
</p><p>
dvibook       rearranges pages into book signatures, adds blank pages as needed
</p><p>
dviselect     selects pages and page ranges
</p><p>
dvitodvi      performs general page rearrangement of selected pages
</p><p>
dviconcat     concatenation of DVI files
</p><p>
Three simple scripts for scaling DIN A4 pages and rearranging two by
two onto a DIN A4 page (a4toa5) are included. The number of pages must
be even (which can be done by odd2even or dvibook).
</p>
-Des:
##----------------------------------------
=Pkg: tftp 0.48 101.20.1 x86_64
=Sum: Trivial File Transfer Protocol (TFTP)
+Des:
<!-- DT:Rich -->
<p>Trivial File Transfer Protocol (TFTP) se normálně používá pro startování
bezdiskových pracovních stanic a pro získání/uložení konfiguračních
souborů síťových komponent.
</p>
-Des:
##----------------------------------------
=Pkg: thinkeramik-style 3.2.1 228.28 x86_64
=Sum: Styl Thin Keramik pro Qt
+Des:
<!-- DT:Rich -->
<p>Jednoduše vypadající modifikace stylu Keramik.
</p>
-Des:
##----------------------------------------
=Pkg: thinkeramik-style-32bit 3.2.1 228.28 x86_64
=Sum: Styl Thin Keramik pro Qt
+Des:
<!-- DT:Rich -->
<p>Jednoduše vypadající modifikace stylu Keramik.
</p>
-Des:
##----------------------------------------
=Pkg: tightvnc 1.3.9 81.13.1 x86_64
=Sum: Virtuální X-Window System server
+Des:
<!-- DT:Rich -->
<p>With vnc, start a virtual X Windows System server and get
access to it from different machines with the vnc-viewer.  You can
change the machine without terminating your session.
</p><p>
The viewer and server are also available for Windows -- they allow access
to vnc under Windows.  You can find it under /dosutils/tightvnc on the
installation media.
</p>
-Des:
##----------------------------------------
=Pkg: timezone 2011m 0.3.1 x86_64
=Sum: Timezone Descriptions
+Des:
<!-- DT:Rich -->
<p>Konfigurační soubory popisující časové zóny. Pomocí programu YaST
můžete vybrat správnou časovou zónu pro váš systém.
</p>
-Des:
##----------------------------------------
=Pkg: tk-32bit 8.5.5 3.14.1 x86_64
=Sum: TK toolkit pro TCL
+Des:
<!-- DT:Rich -->
<p>Tk je toolkit pro grafické uživatelské rozhraní. Jde o standardní GUI nejen pro Tcl, ale i pro řadu dalších dynamických jazyků, které umožňuje vytvářet multiplatformní aplikace pro Windows, Mac OS X, Linux a další systémy.
</p>
-Des:
##----------------------------------------
=Pkg: tk 8.5.5 3.14.1 x86_64
=Sum: TK toolkit pro TCL
+Des:
<!-- DT:Rich -->
<p>Tk je toolkit pro grafické uživatelské rozhraní. Jde o standardní GUI nejen pro Tcl, ale i pro řadu dalších dynamických jazyků, které umožňuje vytvářet multiplatformní aplikace pro Windows, Mac OS X, Linux a další systémy.
</p>
-Des:
##----------------------------------------
=Pkg: tomboy 1.0.1 0.12.20 x86_64
=Sum: GNOME Note Taking Application
+Des:
<!-- DT:Rich -->
<p>Tomboy is a desktop note taking application for Linux and Unix. Simple and easy to use, but with potential to help you organize the ideas and information you deal with every day.
</p>
-Des:
##----------------------------------------
=Pkg: tomboy-lang 1.0.1 0.12.20 x86_64
=Sum: GNOME Note Taking Application
+Des:
<!-- DT:Rich -->
<p>Tomboy is a desktop note taking application for Linux and Unix. Simple and easy to use, but with potential to help you organize the ideas and information you deal with every day.
</p>
-Des:
##----------------------------------------
=Pkg: tomoe 0.6.0 1.22 x86_64
=Sum: Japanese handwriting recognition engine
+Des:
<!-- DT:Rich -->
<p>Japanese handwriting recognition engine
(Tegaki Online MOji-ninshiki Engine)
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-gtk 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-gtk-lang 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: totem 2.28.4 1.2.43 x86_64
=Sum: Přehrávač filmů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Totem is a movie player for the GNOME desktop based on GStreamer (or xine).
It features a playlist, a full-screen mode, seek and volume controls,
and complete keyboard navigation.
</p><p>
Apart from a movie player, it also includes a mozilla plug-in (in a separate package) and a Nautilus thumbnailer and properties page.
</p>
-Des:
##----------------------------------------
=Pkg: totem-browser-plugin 2.28.4 1.2.43 x86_64
=Sum: Browser Plugin Based on Totem Movie Player for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>Totem is movie player for the GNOME desktop based on GStreamer.
</p><p>
Apart from a movie player, it also includes a Mozilla plugin.
</p>
-Des:
##----------------------------------------
=Pkg: totem-browser-plugin-gmp 2.28.4 1.2.43 x86_64
=Sum: Windows Media Browser Plugin Based on Totem Movie Player for the GNOME Desktop
+Des:
<!-- DT:Rich -->
<p>Totem is movie player for the GNOME desktop based on GStreamer.
</p><p>
This package includes only the Windows Media (gmp) browser plugin.
</p>
-Des:
##----------------------------------------
=Pkg: totem-lang 2.28.4 1.2.43 x86_64
=Sum: Přehrávač filmů pro GNOME
+Des:
<!-- DT:Rich -->
<p>Totem is a movie player for the GNOME desktop based on GStreamer (or xine).
It features a playlist, a full-screen mode, seek and volume controls,
and complete keyboard navigation.
</p><p>
Apart from a movie player, it also includes a mozilla plug-in (in a separate package) and a Nautilus thumbnailer and properties page.
</p>
-Des:
##----------------------------------------
=Pkg: totem-pl-parser 2.28.1 1.2.109 x86_64
=Sum: A simple GObject-based library to parse playlist formats
+Des:
<!-- DT:Rich -->
<p>totem-pl-parser is a simple GObject-based library to parse a host of
playlist formats, to save them too.
</p>
-Des:
##----------------------------------------
=Pkg: totem-pl-parser-lang 2.28.1 1.2.109 x86_64
=Sum: A simple GObject-based library to parse playlist formats
+Des:
<!-- DT:Rich -->
<p>totem-pl-parser is a simple GObject-based library to parse a host of
playlist formats, to save them too.
</p>
-Des:
##----------------------------------------
=Pkg: touchcal 0.31 2.22 x86_64
=Sum: Touchscreen (EloGraphics and MicroTouch) calibration utility
+Des:
<!-- DT:Rich -->
<p>A tool to calibrate Touch Screens (namely ones with serial controller manufactured by EloGraphics and MicroTouch) for use with X.
</p>
-Des:
##----------------------------------------
=Pkg: transfig 3.2.5 159.31 x86_64
=Sum: Grafický konvertor
+Des:
<!-- DT:Rich -->
<p>TransFig je sada nástrojů pro vytváření dokumentů obsahujících grafiku
v TeXu. Dokumenty jsou přenositelné, tj. mohou být vytisknuty v různých
prostředích.
</p><p>
Adresář transfig obsahuje zdrojové texty pro příkaz transfig, který generuje
Makefile, jenž zajistí převod Fig kódu do různých jazyků pro
popis grafiky pomocí programu fig2dev. V předchozí verzi byl tento
příkaz implementován jako shellový skript.
</p><p>
Dokumentace: man transfig
</p>
-Des:
##----------------------------------------
=Pkg: tree 1.5.1 2.10.2.1 x86_64
=Sum: File listing as a tree
+Des:
<!-- DT:Rich -->
<p>Program zobrazuje adresářovou strukturu ve formě stromu. Podporuje
dircolors.
</p>
-Des:
##----------------------------------------
=Pkg: trousers 0.3.7 3.7.1 x86_64
=Sum: TSS (TCG Software Stack) access daemon for a TPM chip
+Des:
<!-- DT:Rich -->
<p>The trousers package provides a TSS implementation through the help of a user-space daemon, the tcsd, and a library  Trousers aims to be compliant to the 1.1b and 1.2 TSS specifications as available from the Trusted Computing website http://www.trustedcomputinggroup.org/.
</p><p>
The package needs the /dev/tpm device file to be present on your system. It is a character device file major 10 minor 224, 0600 tss:tss.
</p>
-Des:
##----------------------------------------
=Pkg: tsclient 2.0.2 8.23.80 x86_64
=Sum: Terminal Server Client is a frontend for rdesktop
+Des:
<!-- DT:Rich -->
<p>Terminal Server Client (tsclient) is a frontend for rdesktop. It supports most of the rdesktop 1.1/1.2 arguments, can read .rdp files in the Microsoft Unicode format, writes new .rdp files in ASCII (which can also be read by the Microsoft RDP Client), and looks and functions very much like the Microsoft RDP Client. It features a Gnome panel applet to quickly launch saved rdp files.
</p>
-Des:
##----------------------------------------
=Pkg: tsclient-lang 2.0.2 8.23.80 x86_64
=Sum: Terminal Server Client is a frontend for rdesktop
+Des:
<!-- DT:Rich -->
<p>Terminal Server Client (tsclient) is a frontend for rdesktop. It supports most of the rdesktop 1.1/1.2 arguments, can read .rdp files in the Microsoft Unicode format, writes new .rdp files in ASCII (which can also be read by the Microsoft RDP Client), and looks and functions very much like the Microsoft RDP Client. It features a Gnome panel applet to quickly launch saved rdp files.
</p>
-Des:
##----------------------------------------
=Pkg: tunctl 20070815 10.22 x86_64
=Sum: User Mode Linux tunctl utility
+Des:
<!-- DT:Rich -->
<p>User mode Linux tunctl utility, extended to support point-to-point
tun interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: turnpike 0.1.2 2.6.2 x86_64
=Sum: IDE modul pro IPSec
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje binární data pro ipsec-tools s moduly. Umožňuje psaní vlastních modulů pro zpracování paketů.
</p>
-Des:
##----------------------------------------
=Pkg: tv-common 3.95 179.19 x86_64
=Sum: Písma, nástroje a některá README pro motv a xawtv
+Des:
<!-- DT:Rich -->
<p>Balíček poskytuje některá systémová písma pro X Window systém. Používají je
např. programy motv, xawtv, xawtv-remote a některé soubory README.
</p>
-Des:
##----------------------------------------
=Pkg: udev 147 0.47.2 x86_64
=Sum: Pravidla používající správce událostí jádra a uzlů zařízení
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: udhcp 0.9.8 2.21 x86_64
=Sum: Micro DHCP client / server
+Des:
<!-- DT:Rich -->
<p>Udhcp is a small dhcp client / server mainly used to support Xen para-virtualized PXE booting.
</p>
-Des:
##----------------------------------------
=Pkg: uim 1.2.1 276.39 x86_64
=Sum: Knihovna vícejazyčné vstupní metody
+Des:
<!-- DT:Rich -->
<p>Uim je vícejazyčná knihovna vstupní metody. Cílem projektu Uim je
nabídnout bezpečnou a použitelnou metodu pro všechny jazyky.
V současné době lze použít v aplikacích s podporou gtk+ immodulu
nebo XIM.
</p>
-Des:
##----------------------------------------
=Pkg: uim-qt 1.2.1 276.39 x86_64
=Sum: Qt modul vstupní metody pro uim
+Des:
<!-- DT:Rich -->
<p>Qt modul vstupní metody pro uim
</p>
-Des:
##----------------------------------------
=Pkg: unarj 2.65 277.22 x86_64
=Sum: Pack program
+Des:
<!-- DT:Rich -->
<p>Unarj umožňuje rozbalovat komprimované soubory .arj, které jsou velmi
oblíbené v prostředí MS-DOSu. Pro vytváření komprimovaných archívů
v Linuxu používejte standardní programy gzip a tar. Program unarj
používejte pouze z důvodů kompatibility pro rozbalování archívů
z DOSu.
</p>
-Des:
##----------------------------------------
=Pkg: unclutter 8 1044.20 x86_64
=Sum: Program skrývající obraz kursoru z obrazovky
+Des:
<!-- DT:Rich -->
<p>Program unclutterer skrývá obraz kurzoru z obrazovky, aby na ní
nepřekážel. Kursor zmizí, pokud se zadanou dobu nepohnul.
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC 2.2.12 198.17 x86_64
=Sum: Správce ODBC ovladačů obsahující několik ovladačů
+Des:
<!-- DT:Rich -->
<p>unixODBC je komplexní ODBC řešení pro Linux. Doplňkové ovladače
naleznete na http://www.unixodbc.org/.
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC-32bit 2.2.12 198.17 x86_64
=Sum: Správce ODBC ovladačů obsahující několik ovladačů
+Des:
<!-- DT:Rich -->
<p>unixODBC je komplexní ODBC řešení pro Linux. Doplňkové ovladače
naleznete na http://www.unixodbc.org/.
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC-gui-qt 2.2.12 198.21 x86_64
=Sum: Konfigurační nástroj pro ODBC, Data Source Browser a  ODBC Testtool
+Des:
<!-- DT:Rich -->
<p>Grafické nástroje (na bázi Qt3) pro unixODBC.
</p>
-Des:
##----------------------------------------
=Pkg: unrar 3.80.2 2.8 x86_64
=Sum: Program pro prohlížení, kontrolu a rozbalování RAR archívů
+Des:
<!-- DT:Rich -->
<p>Program UnRAR je freewarový program distribuovaný se zdrojovým kódem,
který slouží pro rozbalování, testování a prohlížení obsah archívů
vytvořených archivačním programem RAR.
</p>
-Des:
##----------------------------------------
=Pkg: unzip 6.00 11.7.1 x86_64
=Sum: Program pro rozbalování komprimovaných souborů
+Des:
<!-- DT:Rich -->
<p>Program UnZip slouží k rozbalování komprimovaných archívů ve formátu
.zip (&quot;zip souborů&quot;). Ačkoli je vysoce kompatibilní s programy PKZIP
a PKUNZIP od PKWARE pro MS-DOS i s programem Zip od Info-ZIP, primárním
cílem byla přenositelnost a funkčnost mimo prostředí MS-DOSu. Umožňuje
rozbalovat i zašifrované archívy.
</p>
-Des:
##----------------------------------------
=Pkg: usb_modeswitch 1.1.6 2.3.1 x86_64
=Sum: A mode switching tool for controlling multiple-device USB gear
+Des:
<!-- DT:Rich -->
<p>USB_ModeSwitch is a mode switching tool for controlling &quot;flip flop&quot; (multiple device) USB gear.
It allows so-called &quot;Zero-CD&quot; devices that show up as USB storage initially to be switched into their more useful &quot;application mode&quot;. This is most common for UMTS/3G wireless WAN devices.
</p>
-Des:
##----------------------------------------
=Pkg: usb_modeswitch-data 1.1.6 2.3.1 x86_64
=Sum: A mode switching tool for controlling multiple-device USB gear
+Des:
<!-- DT:Rich -->
<p>USB_ModeSwitch is a mode switching tool for controlling &quot;flip flop&quot; (multiple device) USB gear.
It allows so-called &quot;Zero-CD&quot; devices that show up as USB storage initially to be switched into their more useful &quot;application mode&quot;. This is most common for UMTS/3G wireless WAN devices.
</p>
-Des:
##----------------------------------------
=Pkg: usbip 0.1.6 2.17 x86_64
=Sum: The USB/IP shared USB system over IP network
+Des:
<!-- DT:Rich -->
<p>The USB/IP Project aims to develop a general USB device sharing system over IP network.
To share USB devices between computers with their full functionality, USB/IP encapsulates &quot;USB I/O messages&quot; into IP packets and transmits them between computers.
Original USB device drivers and applications can be also used for remote USB devices without any modification of them. A computer can use remote USB devices as if they were directly attached; for example, we can ...
</p>
-Des:
##----------------------------------------
=Pkg: usbmuxd 1.0.7 5.8.3 x86_64
=Sum: Socket daemon for the usbmux protocol of iPhone/iPod Touch devices
+Des:
<!-- DT:Rich -->
<p>This package provides the usbmuxd daemon for software to use through the
libusbmuxd library to talk with iPhone/iPod Touch devices.
</p><p>
Usbmux is an encapsulation protocol (think IP, ATM, PPP) that allows
multiplexing several conversations onto a single pair of wires.
</p>
-Des:
##----------------------------------------
=Pkg: usbutils 004 1.13.13 x86_64
=Sum: Nástroje a knihovny pro USB
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje nástroje pro kontrolu USB zařízení.
</p><p>
Potřebuje jádro 2.3.99-pre7 nebo novější, nebo USB backport
z 2.2.18 (s podporou /proc/bus/usb).
</p>
-Des:
##----------------------------------------
=Pkg: utempter 0.5.5 106.20.1 x86_64
=Sum: Užitečný pomocník pro utmp/wtmp aktualizace
+Des:
<!-- DT:Rich -->
<p>Utempter je utilita, která umožní neprivilegovaným aplikacím, jako je např.
virtuální terminál, upravovat utmp databázi bez nutnosti mít setuid root.
</p>
-Des:
##----------------------------------------
=Pkg: utempter-32bit 0.5.5 106.20.1 x86_64
=Sum: Užitečný pomocník pro utmp/wtmp aktualizace
+Des:
<!-- DT:Rich -->
<p>Utempter je utilita, která umožní neprivilegovaným aplikacím, jako je např.
virtuální terminál, upravovat utmp databázi bez nutnosti mít setuid root.
</p>
-Des:
##----------------------------------------
=Pkg: util-linux 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: util-linux-lang 2.19.1 6.29.3 x86_64
=Sum: Kolekce základních systémových nástrojů
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje velké množství nízko-úrovňových systémových programů,
které jsou nezbytné pro funkčnost Linuxového systému. Zahrnuje program
mount, fdisk a další.
</p>
-Des:
##----------------------------------------
=Pkg: uuid-runtime 2.19.1 6.29.3 x86_64
=Sum: Programy pro systém souborů ext2
+Des:
<!-- DT:Rich -->
<p>Programy potřebné pro vytváření a údržbu diskových oddílů typu ext2
a ext3 v Linuxu. V balíčku jsou obsaženy programy chattr, lsattr, mke2fs,
mklost+found, tune2fs, e2fsck, resize2fs a badblocks.
</p>
-Des:
##----------------------------------------
=Pkg: v4l-conf 3.95 179.19 x86_64
=Sum: video4linux - konfigurační nástroj
+Des:
<!-- DT:Rich -->
<p>Malý program používaný pro konfiguraci ovladačů zařízení video4linux
(např. bttv). Tento balíček vyžadují programy xawtx, motv a fbtv.
</p>
-Des:
##----------------------------------------
=Pkg: v4l-tools 3.95 179.19 x86_64
=Sum: video4linux utility pro příkazovou řádku
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje několik utilit: v4lctl pro ovládání zařízení video4linux,
streamer pro nahrávání filmů, fbtv pro sledování televize na konzoli s
framebuffer, ttv pro sledování televize na libovolném ttv (pomocí aalib),
webcam pro zachytávání a upload obrázků, aplikaci pro radio,...
</p>
-Des:
##----------------------------------------
=Pkg: vacation 1.2.6.2 126.22 x86_64
=Sum: Automatický odpovídač na přicházející dopisy
+Des:
<!-- DT:Rich -->
<p>Tento program odpovídá na přicházející e-dopisy, když ležíte na pláži ;-)
</p><p>
Dokumentace: man vacation
</p>
-Des:
##----------------------------------------
=Pkg: vcdimager 0.7.23 121.12 x86_64
=Sum: Video CD (VCD) autorizační software
+Des:
<!-- DT:Rich -->
<p>GNU VCDImager je nástroj pro vytváření, úpravu
a analýzu Video CD a Super Video CD.
</p><p>
Dostupné jsou tyto funkce:
</p><p>
Podpora formátů Video CD 1.1 a 2.0
</p><p>
Podpora formátu Super Video CD 1.0
</p><p>
Plná podpora PBC (ovládání přehrávání - seznamy skladeb)
</p><p>
Podpora položek
</p><p>
Automatické kódování MPEG 
</p><p>
Podpora 99 min CD-R
</p><p>
Extrakce Video CD so souboru (včetně PBC informací)
</p><p>
XML popisky Video CD
</p>
-Des:
##----------------------------------------
=Pkg: vim 7.2 8.15.2 x86_64
=Sum: Vi IMproved
+Des:
<!-- DT:Rich -->
<p>Vim (Vi IMproved) is an almost compatible version of the UNIX editor vi.
Almost every possible command can be performed using only ASCII
characters. Only the &#39;Q&#39; command is missing (you do not need it).
Many new features have
been added: multilevel undo, command line history, file name
completion, block operations, and editing of binary data.
</p><p>
Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions
of UNIX.
</p><p>
For SuSE Linux, Vim is used as /usr/bin/vi.
</p><p>
Package vim contains the normal version of vim. To get the full runtime environment install additionally vim-data.
</p>
-Des:
##----------------------------------------
=Pkg: vim-base 7.2 8.15.2 x86_64
=Sum: Vi IMproved
+Des:
<!-- DT:Rich -->
<p>Vim (Vi IMproved) is an almost compatible version of the UNIX editor vi.
Almost every possible command can be performed using only ASCII
characters. Only the &#39;Q&#39; command is missing (you do not need it).
Many new features have
been added: multilevel undo, command line history, file name
completion, block operations, and editing of binary data.
</p><p>
Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions
of UNIX.
</p><p>
For SuSE Linux, Vim is used as /usr/bin/vi.
</p><p>
Package vim-base contains the common files needed for all different vim
versions. You still need to select at least one of the vim,
vim-enhanced or gvim packages. For full runtime support you might also want to install the vim-data package.
</p>
-Des:
##----------------------------------------
=Pkg: vim-data 7.2 8.15.2 x86_64
=Sum: Vi IMproved
+Des:
<!-- DT:Rich -->
<p>Vim (Vi IMproved) is an almost compatible version of the UNIX editor vi.
Almost every possible command can be performed using only ASCII
characters. Only the &#39;Q&#39; command is missing (you do not need it).
Many new features have
been added: multilevel undo, command line history, file name
completion, block operations, and editing of binary data.
</p><p>
Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions
of UNIX.
</p><p>
For SuSE Linux, Vim is used as /usr/bin/vi.
</p><p>
Package vim-data contains the runtime files.
</p>
-Des:
##----------------------------------------
=Pkg: vinagre 2.28.1 0.1.115 x86_64
=Sum: VNC client for GNOME
+Des:
<!-- DT:Rich -->
<p>Vinagre is a VNC client for GNOME that supports connecting to multiple machines, browsing for VNC servers via avahi and password storage in gnome-keyring.
</p>
-Des:
##----------------------------------------
=Pkg: vinagre-lang 2.28.1 0.1.115 x86_64
=Sum: VNC client for GNOME
+Des:
<!-- DT:Rich -->
<p>Vinagre is a VNC client for GNOME that supports connecting to multiple machines, browsing for VNC servers via avahi and password storage in gnome-keyring.
</p>
-Des:
##----------------------------------------
=Pkg: vino 2.28.1 2.3.1 x86_64
=Sum: GNOME VNC server
+Des:
<!-- DT:Rich -->
<p>VNC server pro GNOME
</p>
-Des:
##----------------------------------------
=Pkg: vino-lang 2.28.1 2.3.1 x86_64
=Sum: GNOME VNC server
+Des:
<!-- DT:Rich -->
<p>VNC server pro GNOME
</p>
-Des:
##----------------------------------------
=Pkg: virt-manager 0.9.0 3.15.15 x86_64
=Sum: Virtual Machine Manager
+Des:
<!-- DT:Rich -->
<p>Virtual Machine Manager provides a graphical tool for administering
virtual machines.
</p>
-Des:
##----------------------------------------
=Pkg: virt-utils 1.1.7 0.9.9 x86_64
=Sum: Xen virtualizace: Hypervisor (aka VMM aka Microkernel)
+Des:
<!-- DT:Rich -->
<p>Various virtualization solutions have a common need for ancillary utilities which manage storage, snapshotting, monitoring, etc.
</p><p>
Both KVM and Xen derive their device and machine model from qemu and inherit a lot from it&#39;s approach to emulation/virtualization.  This package is hence a good place to have qemu related tools reside.  Additionally, any other utilities which have use across the various virtualization solutions available have a home here.
</p>
-Des:
##----------------------------------------
=Pkg: virt-viewer 0.4.1 1.13.34 x86_64
=Sum: Virtual Machine Viewer
+Des:
<!-- DT:Rich -->
<p>Virtual Machine Viewer provides a graphical console client for connecting
to virtual machines. It uses the GTK-VNC widget to provide the display,
and libvirt for looking up VNC server details.
</p>
-Des:
##----------------------------------------
=Pkg: vlan 1.9 62.24.1 x86_64
=Sum: Implementace 802.1q vlan pro Linux
+Des:
<!-- DT:Rich -->
<p>Implementace 802.1q vlan pro Linux. Bližší informace
naleznete na http://scry.wanfear.com/~greear/vlan.html.
</p>
-Des:
##----------------------------------------
=Pkg: vlna 1.3 1.22 x86_64
=Sum: Přidává nezlomitelné mezery do českých textových souborů
+Des:
<!-- DT:Rich -->
<p>Vlna nahrazuje normální mezery za jednopísmennými slovy nezlomitelnými.
Lze použít pro české textové soubory (zejména pro TeX).
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Po instalaci si prosím přečtěte /usr/share/doc/packages/x_cz_sk/README.1st.
</p>
-Ins:
##----------------------------------------
=Pkg: vm-install 0.5.7 0.15.3 x86_64
=Sum: Tool to Define a Virtual Machine and Install Its Operating System
+Des:
<!-- DT:Rich -->
<p>vm-install can define a Xen virtual machine, and cause an operating system to begin installing within that virtual machine.
</p><p>
vm-install can be used in a variety of ways:
<ul>
<li>It can be used interactively or non-interactively.

</li><li>It can automatically pick reasonable VM defaults for a given type of operating system.

</li><li>It can perform completely non-interactive installs, driven via XML files and/or command line parameters.

</li><li>The  supporting  Python  modules  can  be &#39;import&#39;-ed into other Python programs, to create VMs programmatically.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: vobject 0.7.1 1.20 x86_64
=Sum: A python library to create and parse iCalendar and vCard objects
+Des:
<!-- DT:Rich -->
<p>VObject simplifies the process of parsing and creating iCalendar and
vCard objects.
</p>
-Des:
##----------------------------------------
=Pkg: vorbis-tools 1.1.1 172.28 x86_64
=Sum: Nástroje pro práci s Ogg Vorbis
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje některé nástroje pro Ogg Vorbis:
oggenc (kodér) a ogg123 (přehrávač).
</p>
-Des:
##----------------------------------------
=Pkg: vpnc 0.5.1 55.12.1 x86_64
=Sum: Client for Cisco 3000, IOS routers, PIX / ASA Zecurity Appliances, and Juniper/Netscreen
+Des:
<!-- DT:Rich -->
<p>A VPN client compatible with Cisco&#39;s EasyVPN equipment.
</p><p>
Supported Authentications: Pre-Shared-Key + XAUTH, Pre-Shared-Key
Supported IKE DH-Groups: dh1 dh2 dh5
Supported Hash Algo (IKE/IPSEC): md5 sha1
Supported Encryptions (IKE/IPSEC): (null) (1des) 3des aes128 aes192 aes256
Perfect Forward Secrecy: nopfs dh1 dh2 dh5
</p><p>
It runs entirely in userspace and uses the TUN/TAP driver for access.
</p>
-Des:
##----------------------------------------
=Pkg: vpx-tools 0.9.7 3.5.17 x86_64
=Sum: VP8 codec library - Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains utilities around the vp8 codec sdk.
</p><p>
WebM is an open, royalty-free, media file format designed for the web.
</p><p>
WebM defines the file container structure, video and audio formats.
WebM files consist of video streams compressed with the VP8 video codec
and audio streams compressed with the Vorbis audio codec.
The WebM file structure is based on the Matroska container.
</p>
-Des:
##----------------------------------------
=Pkg: vte 0.22.5 0.2.1 x86_64
=Sum: Emulátor terminálu
+Des:
<!-- DT:Rich -->
<p>VTE je experimentální widget emulátoru terminálu pro GTK+ 2.0
</p>
-Des:
##----------------------------------------
=Pkg: vte-lang 0.22.5 0.2.1 x86_64
=Sum: Emulátor terminálu
+Des:
<!-- DT:Rich -->
<p>VTE je experimentální widget emulátoru terminálu pro GTK+ 2.0
</p>
-Des:
##----------------------------------------
=Pkg: vte016-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono vazby pro vte
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje Mono vazby pro vte.
</p>
-Des:
##----------------------------------------
=Pkg: w3m 0.5.2 132.2.1 x86_64
=Sum: Textový WWW prohlížeč
+Des:
<!-- DT:Rich -->
<p>W3m je WWW prohlížeč pro textový režim. Má několik užitečných vlastností:
<ul>
<li>w3m umí vytvářet tabulky
</li><li>w3m umí zobrazovat rámy (konvertuje je na tabulky)
</li><li>podpora SSL
</li><li>w3m umí snadno zobrazovat dokumenty čtené ze standardního vstupu
</li><li>w3m může zpracovávat cookie.
</li><li>w3m je malý.
</li><li>w3m spolupracuje s myší
</li></ul>
Jestliže máte nainstalován w3m-inline-image, umí zobrazovat grafiku
na terminálu nebo konzoli.
</p>
-Des:
##----------------------------------------
=Pkg: wdiff 0.5.2 756.21 x86_64
=Sum: Zobrazuje rozdíly ve slovech mezi textovými soubory
+Des:
<!-- DT:Rich -->
<p>Program wdiff porovnává dva soubory po slovech. Slovo je cokoli mezi
bílými znaky (= mezery, tabelátory, ...). Program zjišťuje, která
slova je třeba smazat nebo přidat, aby se ze starého souboru získal
nový.
</p><p>
</p><p>
Xwdiff je šikovné X rozhraní používající Tcl/Tk.
</p>
-Des:
##----------------------------------------
=Pkg: wget 1.11.4 1.15.1 x86_64
=Sum: Nástroj pro zrcadlení FTP a HTTP serverů
+Des:
<!-- DT:Rich -->
<p>Wget slouží k načítání WWW dokumentů a souborů z FTP serverů. Lze jej
používat ve skriptech i z příkazového řádku.
</p>
-Des:
##----------------------------------------
=Pkg: whois 4.7.28 1.17 x86_64
=Sum: Whois klient
+Des:
<!-- DT:Rich -->
<p>Nový whois klient (podle RFC 954) napsaný od nuly. Jeho autorem je Marco
d&#39;Itri. Je odvozený z BSD a RIPE whois klientů a je s nimi kompatibilní.
Je inteligentní a při většině dotazů umí automaticky vybrat vhodný whois
server.
Balíček obsahuje také program mkpasswd, jednoduché rozhraní
k funkci crypt(3).
</p>
-Des:
##----------------------------------------
=Pkg: wireless-tools 30.pre7 3.13.1 x86_64
=Sum: Nástroje pro wireless LAN karty
+Des:
<!-- DT:Rich -->
<p>Tyto nástroje slouží pro práci a kontrolu wireless LAN karet
prostřednictvím &quot;Wireless Extensions&quot;. Ty dávají k dispozici port pro
výměnu síťových parametrů a doplňujících informací.
</p>
-Des:
##----------------------------------------
=Pkg: wireshark 1.4.10 0.2.1 x86_64
=Sum: Analyzátor síťového provozu.
+Des:
<!-- DT:Rich -->
<p>Wireshark is a free network protocol analyzer for Unix and Windows. It allows you to examine data from a live network or from a capture file on disk. You can interactively browse the capture data, viewing summary and detail information for each packet. Wireshark has several powerful features, including a rich display filter language and the ability to view the reconstructed stream of a TCP session.
</p>
-Des:
##----------------------------------------
=Pkg: wnck-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for wnck
+Des:
<!-- DT:Rich -->
<p>Mono bindings for wnck
</p>
-Des:
##----------------------------------------
=Pkg: wodim 1.1.8 3.32.3 x86_64
=Sum: Nástroj pro zapisování CD-R
+Des:
<!-- DT:Rich -->
<p>wodim is used to record data or audio CDs on a
CD-Recorder or to write DVD media on a DVD-Recorder.
</p>
-Des:
##----------------------------------------
=Pkg: wol 0.7.1 97.22 x86_64
=Sum: Klient pro buzení po síti
+Des:
<!-- DT:Rich -->
<p>Wake On Lan klient budí stroje se síťovým rozhraním magický paket.
některé systémy podporují také SecureON, které rozšiřuje wake-on-lan
o heslo. Tato funkce je wol také podporována.
</p>
-Des:
##----------------------------------------
=Pkg: wordcut 0.5.1b2 113.17 x86_64
=Sum: Nástroj pro dělení slov.
+Des:
<!-- DT:Rich -->
<p>Nástroj pro dělení slov.
</p>
-Des:
##----------------------------------------
=Pkg: wpa_supplicant 0.7.1 6.9.2 x86_64
=Sum: Implementace WPA supplicant
+Des:
<!-- DT:Rich -->
<p>wpa_supplicant je implementace komponenty WPA Supplicant,
např. část běžící na klientské stanici. Obsahuje implementaci
procesu ověřování klíčem pomocí WPA Authenticator a ovládá
IEEE 802.11 ověřování/asociaci wlan ovladače.
</p>
-Des:
##----------------------------------------
=Pkg: wpa_supplicant-gui 0.7.1 6.9.2 x86_64
=Sum: WPA supplicant graphical front-end
+Des:
<!-- DT:Rich -->
<p>This package contains a graphical front-end to wpa_supplicant, an implementation of the WPA Supplicant component.
</p>
-Des:
##----------------------------------------
=Pkg: wsmancli 2.2.3 0.2.31 x86_64
=Sum: Opensource Implementation of WS-Management - Command line utility
+Des:
<!-- DT:Rich -->
<p>Part of Openwsman, an Opensource Implementation of WS-Management
</p>
-Des:
##----------------------------------------
=Pkg: wv 1.2.2 177.33 x86_64
=Sum: Library and Tools for Importing  Microsoft Word (tm) Documents
+Des:
<!-- DT:Rich -->
<p>WV je program, který umí číst binární soubory vytvořené programem
MS Word 8 (z Office97). Dokumenty jsou konvertovány do HTML a pak mohou
být zobrazeny libovolným WWW prohlížečem.
</p>
-Des:
##----------------------------------------
=Pkg: wvdial 1.60 1.15 x86_64
=Sum: Program pro vytáčení a navazování PPP spojení
+Des:
<!-- DT:Rich -->
<p>PPP dialer. S tímto programem můžete ručně navazovat PPP spojení
s vaším poskytovatelem Internetu. Ruční konfigurace (vytváření chat
skriptů apod.) je zpravidla zbytečná, protože tento program má dost
inteligence, aby se vyrovnal s většinou poskytovatelů připojení.
</p>
-Des:
##----------------------------------------
=Pkg: wvstreams 4.4.1 5.16 x86_64
=Sum: Knihovna síťového programování v C++
+Des:
<!-- DT:Rich -->
<p>Knihovna pro síťové programování v C++. Byla navržena pro bezpečné,
jednoduché a na OS nezávislé síťové aplikace.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK 2.8.8.1 1.36 x86_64
=Sum: C++ Framework for Cross-Platform Development
+Des:
<!-- DT:Rich -->
<p>wxWidgets is a free C++ framework to make cross-platform programming easy.
It supports Windows 3.1/95/98/NT, and Unix with
GTK/Motif/Lesstif. This is the version for GTK+. This package only
contains the runtime libraries and other data needed by the runtime
libraries.
</p><p>
Additional documentation is available in the package wxGTK-doc
and you can find some examples in the package wxGTK-examples.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-evtouch 0.8.7 4.13.1 x86_64
=Sum: X.Org input evtouch driver
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org evtouch input drivers.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-fujitsu 0.6.5 1.23.84 x86_64
=Sum: X.Org fujitsu Touchscreen Input Driver
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org fujitsu input drivers for Fujitsu touchscreens from the P-Series Tablet PCs of FSC.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom 0.8.6 0.3.89 x86_64
=Sum: X11 vstupní modul pro tablety Wacom
+Des:
<!-- DT:Rich -->
<p>tento balíček obsahuje X11 vstupní modul pro tablety Wacom.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom-tools 0.8.6 0.3.89 x86_64
=Sum: Tools for configuration, diagnostic and libraries for Wacom tablets
+Des:
<!-- DT:Rich -->
<p>This package contains tools for configuration, diagnostic and libraries for
Wacom tablets.
</p>
-Des:
##----------------------------------------
=Pkg: x3270 3.2.20 509.5.1 x86_64
=Sum: A Family of IBM 3270 Terminal Emulators
+Des:
<!-- DT:Rich -->
<p>This package contains a family of IBM 3270 mainframe terminal emulators:
<ul>
<li>terminal emulators for interactive use
x3270  X Window System
c3270  curses based
</li><li>terminal emulators for scripted use
s3270    see the x3270-script man page
tcl3270  Tcl based
</li><li>printer emulator pr3287
</li><li>do not miss the punch card puncher emulator x026
</li></ul>
x3270 is an IBM 3270 terminal emulator for the X Window System.  x3270
runs over a telnet connection (with or without TN3270E) and emulates
either an IBM 3279 (color) or 3278 (monochrome).  It supports APL2
characters, IND$FILE file transfer, NVT mode, a pop-up keypad for
3270-specific keys, alternative keymaps, 3287 printer sessions, and a
scrollbar and has extensive debugging and scripting facilities.
</p><p>
c3270 is the curses-based version of x3270.  It runs on any dumb
terminal (an xterm or a console, for example), and supports (almost) all of the
x3270 features.  c3270 scripts are compatible with x3270 scripts,
and the subset of command line options and resource definitions are
also compatible.
</p><p>
s3270 is a scripting-only version of x3270.  This program is intended
primarily for writing &quot;screen-scraping&quot; applications, for example a CGI
back-end script that retrieves database information from a mainframe.
</p><p>
tcl3270 is a Tcl-based 3270 scripting engine.  It lets you write Tcl
scripts that manipulate 3270 sessions, and is quite a bit easier to
set up and use than s3270.
</p><p>
pr3287 is the printer companion for the above tools, and allows
printer output from a 3270 session to be directed to a Unix printer
queue.
</p><p>
x026 is a fun toy which emulates an x026 puncher.
</p>
-Des:
##----------------------------------------
=Pkg: x86info 1.29 0.5.34 x86_64
=Sum: Show x86 CPU Information
+Des:
<!-- DT:Rich -->
<p>Unlike other &#39;cpuinfo&#39; tools which just parse /proc/cpuinfo, x86info probes
the CPU registers to find out more information. It can discover the
contents of model-specific registers, discover CPU silicon revisions, and
more.
</p>
-Des:
##----------------------------------------
=Pkg: xaw3d 1.5E 408.13 x86_64
=Sum: Sada 3D widgetů Athena
+Des:
<!-- DT:Rich -->
<p>Tato knihovna může být používána místo standardní knihovny widgetů
Athena. Knihovna se pokouší dodržovat standard knihovny libXaw.
Existují i programy, které tuto knihovnu používají explicitně (to
je důvod, proč je knihovna součástí distribuce).
</p><p>
POZNÁMKA: NENAHRAZUJTE /usr/X11R6/lib/libXaw.so.6.1!
</p>
-Des:
##----------------------------------------
=Pkg: xaw3d-32bit 1.5E 408.13 x86_64
=Sum: Sada 3D widgetů Athena
+Des:
<!-- DT:Rich -->
<p>Tato knihovna může být používána místo standardní knihovny widgetů
Athena. Knihovna se pokouší dodržovat standard knihovny libXaw.
Existují i programy, které tuto knihovnu používají explicitně (to
je důvod, proč je knihovna součástí distribuce).
</p><p>
POZNÁMKA: NENAHRAZUJTE /usr/X11R6/lib/libXaw.so.6.1!
</p>
-Des:
##----------------------------------------
=Pkg: xbase 2.0.0 251.15 x86_64
=Sum: XBase knihovna kompatibilní s C++
+Des:
<!-- DT:Rich -->
<p>XBase kompatibilní s knihovnou tříd C++.
</p><p>
Balíček obsahuje hlavičkové soubory, knihovnu, některé nástroje pro příkazovou
 řádku a dokumentaci.
</p>
-Des:
##----------------------------------------
=Pkg: xbsql 0.11 189.14 x86_64
=Sum: SQL wrapper pro XBase knihovnu
+Des:
<!-- DT:Rich -->
<p>XBase DBMS je C++ knihovna s podporou přístupu k souborům a indexům XBase (např. .dbf soubory). Poskytuje také &#39;record level&#39; přístup.
</p>
-Des:
##----------------------------------------
=Pkg: xchat 2.8.6 26.27 x86_64
=Sum: IRC klient
+Des:
<!-- DT:Rich -->
<p>X-Chat je další IRC klient pro X Window System, používající toolkit Gtk+.
V porovnání s jinými IRC klienty používajícími Gtk+ je snáze použitelný
a rozhraní je pěkně navrženo.
</p>
-Des:
##----------------------------------------
=Pkg: xchat-lang 2.8.6 26.27 x86_64
=Sum: IRC klient
+Des:
<!-- DT:Rich -->
<p>X-Chat je další IRC klient pro X Window System, používající toolkit Gtk+.
V porovnání s jinými IRC klienty používajícími Gtk+ je snáze použitelný
a rozhraní je pěkně navrženo.
</p>
-Des:
##----------------------------------------
=Pkg: xdelta 1.1.4 103.30.4.1 x86_64
=Sum: Binární delta generátor a náhrada knihovny RCS
+Des:
<!-- DT:Rich -->
<p>Xdelta je binární delta generátor a náhrada knihovny RCS. Algoritmus delta je pro textové soubory rychlejší než GNU diff a funguje i pro binární soubory.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-menu 0.2 191.22 x86_64
=Sum: XDG menu pro WindowMaker a další správce oken
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje perlovské skripty které konvertují menu XDG
do formátu používaného některými správci oken např. WindowMaker.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-user-dirs 0.10 1.18 x86_64
=Sum: Utilities to handle user data directories
+Des:
<!-- DT:Rich -->
<p>xdg-user-dirs is a tool to help manage &quot;well known&quot; user directories like
the desktop folder and the music folder. It also handleslocalization
(i.e. translation) of the filenames.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-user-dirs-gtk 0.8 4.26 x86_64
=Sum: xdg-user-dir support for Gnome and Gtk+ applications
+Des:
<!-- DT:Rich -->
<p>A companion to xdg-user-dirs that integrates it into the Gnome desktop and Gtk+ applications.  Presents a dialog when a user changes locales to help move they standard user directories to the correct names.
</p>
-Des:
##----------------------------------------
=Pkg: xdg-user-dirs-gtk-lang 0.8 4.26 x86_64
=Sum: xdg-user-dir support for Gnome and Gtk+ applications
+Des:
<!-- DT:Rich -->
<p>A companion to xdg-user-dirs that integrates it into the Gnome desktop and Gtk+ applications.  Presents a dialog when a user changes locales to help move they standard user directories to the correct names.
</p>
-Des:
##----------------------------------------
=Pkg: xdmbgrd 0.6 92.16 x86_64
=Sum: Pozadí pro SuSE Linux
+Des:
<!-- DT:Rich -->
<p>Pozadí s motivem SuSE Linuxu pro xdm.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs 21.5.28.20080401 59.23.2 x86_64
=Sum: XEmacs
+Des:
<!-- DT:Rich -->
<p>Toto je aktuální verze XEmacsu, původně nazývaného Lucid-Emacs. Má pěkné
grafické rozhraní, a je odvozený z GNU Emacs. Důraz je kladen na podporu
moderního grafického rozhraní  a výojový model open software, jako má Linux.
</p><p>
Lispová makra nemusí být přenositelná mezi GNU-emacsem a Xemacsem. To
platí zejména pro přeložené .elc soubory a klávesová makra.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-info 21.5.28.20080401 59.23.2 x86_64
=Sum: Info soubory pro Xemacs
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje všechny info soubory pro Xemacs. Všechny tyto
soubory lze číst přímo Xemacsem a popisují xemacs a některé jeho
režimy.
</p>
-Des:
##----------------------------------------
=Pkg: xen 4.1.2_14 0.5.5 x86_64
=Sum: Xen virtualizace: Hypervisor (aka VMM aka Microkernel)
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the Xen Hypervisor. (tm)
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install the kernel-xen and xen-tools to use Xen. Xen 3 also supports running unmodified guests using full virtualization, if appropriate hardware is present. Install xen-tools-ioemu if you want to use this.
</p><p>
[Hypervisor is a trademark of IBM]
</p>
-Des:
##----------------------------------------
=Pkg: xen-doc-html 4.1.2_14 0.5.5 x86_64
=Sum: Xen virtualizace: HTML dokumentace
+Des:
<!-- DT:Rich -->
<p>Xen je monitor virtuálního stroje pro x86, který podporuje běh více operačním systémů současně s neobyčejným rozdělením zdrojů a nastavením výkonu.
</p><p>
Online dokumentaci v HTML formátu najdete v xen-doc-html.
Ke čtení souborů z /usr/share/doc/packages/xen/html/
použijte libovolný prohlížeč.
</p>
-Des:
##----------------------------------------
=Pkg: xen-doc-pdf 4.1.2_14 0.5.5 x86_64
=Sum: Xen virtualizace: PDF dokumentace
+Des:
<!-- DT:Rich -->
<p>Xen je monitor virtuálního stroje pro x86, který podporuje běh více operačním systémů současně s neobyčejným rozdělením zdrojů a nastavením výkonu.
</p><p>
Online dokumentaci v PDF formátu najdete v xen-doc-pdf.
Ke čtení souborů z /usr/share/doc/packages/xen/pdf/
použijte xpdf/kpdf/gpdf/gv/...
</p>
-Des:
##----------------------------------------
=Pkg: xen-kmp-default 4.1.2_14_3.0.13_0.27 0.5.5 x86_64
=Sum: Xen para-virtual device drivers for fully virtualized guests
+Des:
<!-- DT:Rich -->
<p>Xen para-virtual device drivers for fully virtualized guests
</p><p>
Xen is a virtual machine monitor for x86 that supports execution of
multiple guest operating systems with unprecedented levels of
performance and resource isolation.
</p><p>
This package contains the libraries and header files needed to create
tools to control virtual machines.
</p><p>
Modern computers are sufficiently powerful to use virtualization to
present the illusion of many smaller virtual machines (VMs), each
running a separate operating system instance. Successful partitioning
of a machine to support the concurrent execution of multiple operating
systems poses several challenges. Firstly, virtual machines must be
isolated from one another: It is not acceptable for the execution of
one to adversely affect the performance of another. This is
particularly true when virtual machines are owned by mutually
untrusting users. Secondly, it is necessary to support a variety of
different operating systems to accommodate the heterogeneity of popular
applications. Thirdly, the performance overhead introduced by
virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is
modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for
your hardware (except for CPU and memory). This job is left to the
kernel that&#39;s running in domain 0. Thus the domain 0 kernel is
privileged; it has full hardware access. It&#39;s started immediately after
Xen starts up. Other domains have no access to the hardware; instead
they use virtual interfaces that are provided by Xen (with the help of
the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD
(Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich)
exist. A port of Windows XP was developed for an earlier version of
Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xen-kmp-trace 4.1.2_14_3.0.13_0.27 0.5.5 x86_64
=Sum: Xen para-virtual device drivers for fully virtualized guests
+Des:
<!-- DT:Rich -->
<p>Xen para-virtual device drivers for fully virtualized guests
</p><p>
Xen is a virtual machine monitor for x86 that supports execution of
multiple guest operating systems with unprecedented levels of
performance and resource isolation.
</p><p>
This package contains the libraries and header files needed to create
tools to control virtual machines.
</p><p>
Modern computers are sufficiently powerful to use virtualization to
present the illusion of many smaller virtual machines (VMs), each
running a separate operating system instance. Successful partitioning
of a machine to support the concurrent execution of multiple operating
systems poses several challenges. Firstly, virtual machines must be
isolated from one another: It is not acceptable for the execution of
one to adversely affect the performance of another. This is
particularly true when virtual machines are owned by mutually
untrusting users. Secondly, it is necessary to support a variety of
different operating systems to accommodate the heterogeneity of popular
applications. Thirdly, the performance overhead introduced by
virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is
modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for
your hardware (except for CPU and memory). This job is left to the
kernel that&#39;s running in domain 0. Thus the domain 0 kernel is
privileged; it has full hardware access. It&#39;s started immediately after
Xen starts up. Other domains have no access to the hardware; instead
they use virtual interfaces that are provided by Xen (with the help of
the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD
(Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich)
exist. A port of Windows XP was developed for an earlier version of
Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xen-libs-32bit 4.1.2_14 0.5.5 x86_64
=Sum: Xen Virtualization: Libraries
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the libraries used to interact with the Xen virtual machine monitor.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xen-libs 4.1.2_14 0.5.5 x86_64
=Sum: Xen Virtualization: Libraries
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the libraries used to interact with the Xen virtual machine monitor.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xen-tools 4.1.2_14 0.5.5 x86_64
=Sum: Xen virtualizace: Ovládací nástroje pro domain 0
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the control tools that allow you to start, stop, migrate, and manage virtual machines.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install kernel-xen and xen to use Xen.
</p>
-Des:
##----------------------------------------
=Pkg: xen-tools-domU 4.1.2_14 0.5.5 x86_64
=Sum: Xen Virtualization: Control tools for domain U
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains tools that allow unprivileged domains to query the virtualized environment.
</p>
-Des:
##----------------------------------------
=Pkg: xfsprogs 3.1.6 0.7.1 x86_64
=Sum: Nástroje pro správu souborového systému XFS
+Des:
<!-- DT:Rich -->
<p>Soubor příkazů pro souborový systém XFS, včetně mkfs.xfs.
</p><p>
</p><p>
XFS je vysoce výkonný žurnálový souborový systém, který vychází z platformy
SGI IRIX. Je kompletně vícevláknový, podporuje velké soubory a souborové systémy,
rozšířené atributy, proměnou velikost bloku atd. Pracuje s &quot;extents&quot; a používá
Btrees (pro adresáře, extents a volné místo) pro zaručení výkonu a škálovatelnosti.
</p><p>
</p><p>
Bližší informace můžete nalézt na http://oss.sgi.com/projects/xfs/.
Tato implementace je diskově kompatibilní s verzí XFS z OS IRIX.
</p>
-Des:
##----------------------------------------
=Pkg: xinetd 2.3.14 130.131.1 x86_64
=Sum: Démon inetd s rozšířenou funkčností
+Des:
<!-- DT:Rich -->
<p>Xinetd má všechny funkce inetd a některé další možnosti:
</p><p>
<ul>
<li>řízení přístupu

</li><li>prevence před útoky &#39;denial-of-access&#39;

</li><li>rozsáhlé schopnosti žurnálování

</li><li>srozumitelný konfigurační soubor
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: xiterm 0.5.20040304 259.27 x86_64
=Sum: Lokalizovaný emulátor terminálu pro X11
+Des:
<!-- DT:Rich -->
<p>Lokalizovaný emulátor terminálu pro X11
</p>
-Des:
##----------------------------------------
=Pkg: xlockmore 5.26.1 9.28.80 x86_64
=Sum: Šetřič a zamykač obrazovky pro X Window System
+Des:
<!-- DT:Rich -->
<p>Šetřič a zamykač obrazovky xlock pro X Window system.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11 7.4 9.47.1 x86_64
=Sum: X.Org core and sample applications
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
Obsahuje základ X.Org a některé vzorové aplikace.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-Xvnc 7.4 27.60.5 x86_64
=Sum: VNC server pro X Window system
+Des:
<!-- DT:Rich -->
<p></p><p>
An X Window System server for Virtual Network Computing (VNC).
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-devel 7.4 8.26.32.1 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-input 7.4 13.42.25 x86_64
=Sum: X.Org vstupní ovladače
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org vstupní ovladače.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-video 7.4.0.1 0.46.22 x86_64
=Sum: X.Org video drivers
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje následující X.Org video ovladače.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-video-chrome9 5.74.33 0.2.53 x86_64
=Sum: Chrome9 driver by VIA
+Des:
<!-- DT:Rich -->
<p>Chrome9 driver by VIA. Supported Hardware: VIA UniChrome Family
(CLE266, KM400/KM400A/KN400/P4M800, K8M800/K8N800/K8N800A,
PM800/PM880/CN400/CN333, P4M800PRO/P4M800CE/VN800, CX700/VX700,
K8M890, P4M890/CN800, CN750/PN896/VN900, P4M900, VX800)
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-video-radeonhd 1.3.0_20100512_80ba041 1.8.55 x86_64
=Sum: Driver for AMD GPG (ATI) r5xx/r6xx Chipsets
+Des:
<!-- DT:Rich -->
<p>radeonhd is the X.org X11 driver for AMD GPG (ATI) r5xx/r6xx chipsets.
Main development is driven by Novell, in close relationship to AMD
which provides free documentation for the chipsets.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-driver-video-unichrome 20091117 0.6.142 x86_64
=Sum: The Unichrome Project
+Des:
<!-- DT:Rich -->
<p>The Unichrome Project. The Unichrome Project provides Free and Open
Source support for the S3 Unichrome family of integrated graphics
devices, as found on all recent VIA Technologies Northbridges.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts-devel 7.4 1.15 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE-32bit 7.4 1.15 x86_64
=Sum: X.Org ICE knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org ICE knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE 7.4 1.15 x86_64
=Sum: X.Org ICE knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org ICE knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE-devel 7.4 1.15 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM-32bit 7.4 1.18 x86_64
=Sum: X.Org SM knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org SM knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM 7.4 1.18 x86_64
=Sum: X.Org SM knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org SM knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM-devel 7.4 1.18 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-32bit 7.4 5.9.1 x86_64
=Sum: X.Org X11 knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org X11 knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11 7.4 5.9.1 x86_64
=Sum: X.Org X11 knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org X11 knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-ccache 7.4 1.23 x86_64
=Sum: X.Org compose cache
+Des:
<!-- DT:Rich -->
<p></p><p>
Cache for X.Org compose files.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-devel 7.4 5.9.1 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau-32bit 7.4 1.15 x86_64
=Sum: X.Org Xau knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xau knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau 7.4 1.15 x86_64
=Sum: X.Org Xau knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xau knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau-devel 7.4 1.15 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-32bit 7.4 1.15 x86_64
=Sum: X.Org Xdmcp knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
tento balíček obsahuje X.Org Xdmcp knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp 7.4 1.15 x86_64
=Sum: X.Org Xdmcp knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
tento balíček obsahuje X.Org Xdmcp knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-devel 7.4 1.15 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-32bit 7.4 1.16.21 x86_64
=Sum: X.Org Xext knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xext knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext 7.4 1.16.21 x86_64
=Sum: X.Org Xext knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xext knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-devel 7.4 1.16.21 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes-32bit 7.4 1.14 x86_64
=Sum: X.Org Xfixes knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xfixes knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes 7.4 1.14 x86_64
=Sum: X.Org Xfixes knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xfixes knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes-devel 7.4 1.14 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu-32bit 7.4 1.17 x86_64
=Sum: X.Org Xmu knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xmu knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu 7.4 1.17 x86_64
=Sum: X.Org Xmu knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xmu knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu-devel 7.4 1.17 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp-32bit 7.4 1.14 x86_64
=Sum: X.Org Xp knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xp knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp 7.4 1.14 x86_64
=Sum: X.Org Xp knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xp knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp-devel 7.4 1.14 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm-32bit 7.4 1.17 x86_64
=Sum: X.Org Xpm knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xpm knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm 7.4 1.17 x86_64
=Sum: X.Org Xpm knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xpm knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm-devel 7.4 1.17 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil-32bit 7.4 1.17 x86_64
=Sum: X.Org XprintUtil knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org XprintUtil knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil 7.4 1.17 x86_64
=Sum: X.Org XprintUtil knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org XprintUtil knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil-devel 7.4 1.17 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender-32bit 7.4 1.14 x86_64
=Sum: X.Org Xrender knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xrender knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender 7.4 1.14 x86_64
=Sum: X.Org Xrender knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xrender knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender-devel 7.4 1.14 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt-32bit 7.4 1.17 x86_64
=Sum: X.Org Xt knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xt knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt 7.4 1.17 x86_64
=Sum: X.Org Xt knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xt knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt-devel 7.4 1.17 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv-32bit 7.4 1.14 x86_64
=Sum: X.Org Xv knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xv knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv 7.4 1.14 x86_64
=Sum: X.Org Xv knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org Xv knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv-devel 7.4 1.14 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc-32bit 7.4 1.15 x86_64
=Sum: X.Org fontenc knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org fontenc knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc 7.4 1.15 x86_64
=Sum: X.Org fontenc knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org fontenc knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc-devel 7.4 1.15 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libs-32bit 7.4 8.26.32.1 x86_64
=Sum: Remaining X.Org libraries
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje zbývající X.Org knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libs 7.4 8.26.32.1 x86_64
=Sum: Remaining X.Org libraries
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje zbývající X.Org knihovny.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb-32bit 7.4 1.20.34 x86_64
=Sum: X.Org xcb library
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org xcb library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb 7.4 1.20.34 x86_64
=Sum: X.Org xcb library
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org xcb library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb-devel 7.4 1.20.34 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje všechny důležité hlavičkové soubory a knihovny
potřebné pro vývoj aplikací, které je potřebují.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile-32bit 7.4 1.14 x86_64
=Sum: X.Org xkbfile knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org xkbfile knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile 7.4 1.14 x86_64
=Sum: X.Org xkbfile knihovna
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org xkbfile knihovnu.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile-devel 7.4 1.14 x86_64
=Sum: Hlavičkové soubory a knihovny nezbytné pro vývoj
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-proto-devel 7.4 1.32.34 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server 7.4 27.60.5 x86_64
=Sum: X.Org Server
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org server.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server-dmx 7.3.99 17.9.20 x86_64
=Sum: X.Org Server
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
Tento balíček obsahuje X.Org server.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server-extra 7.4 27.60.5 x86_64
=Sum: Additional Xservers (Xdmx, Xephyr, Xnest, Xvfb)
+Des:
<!-- DT:Rich -->
<p>This package contains additional Xservers (Xdmx, Xephyr, Xnest, Xvfb).
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server-rdp 7.3.99 3.16.2 x86_64
=Sum: RDP server for X.Org Server
+Des:
<!-- DT:Rich -->
<p>This package contains the RDP server for the X.Org Server.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-util-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
Hlavičkové soubory a knihovny pro X11 vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-xauth 7.4 9.47.1 x86_64
=Sum: X authority file utility
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>The xauth program is used to edit and display the authorization information used in connecting to the X server.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-xtrans-devel 7.4 4.25.46 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
Hlavičkové soubory a knihovny pro X11 vývoj aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: xosd 2.2.14 1.27 x86_64
=Sum: X On-Screen Display knihovna
+Des:
<!-- DT:Rich -->
<p>Knihovna pro zobrazení podobné TV v X.
</p>
-Des:
##----------------------------------------
=Pkg: xournal 0.4.2.1 34.11 x86_64
=Sum: An application for notetaking, sketching, and keeping a journal using a stylus
+Des:
<!-- DT:Rich -->
<p>Xournal is an application for notetaking, sketching, keeping a journal using a stylus. It is free software (GNU GPL) and runs on Linux (recent distributions) and other GTK+/Gnome platforms. It is similar to Microsoft Windows Journal or to other alternatives such as Jarnal and Gournal.
</p>
-Des:
##----------------------------------------
=Pkg: xrdp 0.4.1 28.17.1 x86_64
=Sum: Open Source remo desktop protocol (RDP) server
+Des:
<!-- DT:Rich -->
<p>A full functionnal Linux terminal server, capable of accepting connection from rdesktop and Microsoft&#39;s own terminal server / remote desktop clients.
</p>
-Des:
##----------------------------------------
=Pkg: xsane 0.995 131.34.13 x86_64
=Sum: A GTK-Based Graphical Scanning Front-End for SANE
+Des:
<!-- DT:Rich -->
<p>XSane does not support any scanners itself. XSane uses the SANE library to talk to scanners that are supported by SANE.
</p><p>
XSane is designed for acquiring images with scanners (there are other devices like cameras and video devices supported by SANE, but XSane is not designed for that purpose). You can scan to file, make a photocopy, create a fax, and start XSane from the GIMP as a GIMP plug-in.
</p><p>
XSane may not work correctly or you may not be able to take full advantage of all functions if you do not configure XSane correctly. See the documentation at /usr/share/sane/xsane/doc/sane-xsane-doc.html.
</p><p>
The XSane home page is http://www.xsane.org/.
</p>
-Des:
##----------------------------------------
=Pkg: xscreensaver 5.07 6.34.32 x86_64
=Sum: Šetřič a zámek obrazovky X11
+Des:
<!-- DT:Rich -->
<p>Program xscreensaver po určité době nečinnosti klávesnice a myši
spustí náhodně vybraný grafický demonstrační program. Po stisknutí
klávesy nebo pohybu či kliknutí myší se deaktivuje. Umí také po určité
době nečinnosti, ihned, nebo na požádání zamknout obrazovku.
</p><p>
Balíček se dělí na dvě části: šetřič obrazovky a démon, který sleduje
činnost systému a zapíná další démony (např. xlock).
</p><p>
Libovolný program schopný kreslit na kořenové okno, může být spuštěn
pomocí xscreensaver. Nezáleží přitom v čem a jak byl program napsán,
nebo které používá knihovny. O vše se stará démon xscreensaver - volaný
program pouze vykresluje na obrazovku.
</p><p>
Výhodou oproti xlock a xautolock je snadnost instalace nových grafických
efektů. Nemusíte znovu překládat (nebo znovu spouštět xscreensaver), abyste
změnili zobrazovací režim - stačí změnit konfigurační soubor.
</p>
-Des:
##----------------------------------------
=Pkg: xstroke 0.6 95.26 x86_64
=Sum: Fullscreen gesture recognition for X
+Des:
<!-- DT:Rich -->
<p>xstroke is a full-screen gesture recognition program for the X Window System.
It captures gestures performed with a pointer device, (such as a mouse, a
stylus, or a pen/tablet), recognizes the gestures and performs actions based on the gestures.
</p>
-Des:
##----------------------------------------
=Pkg: xterm 238 1.16 x86_64
=Sum: The basic X terminal program
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje základní terminálový program X.Org.
</p>
-Des:
##----------------------------------------
=Pkg: xtermset 0.5.2 255.22 x86_64
=Sum: Program pro změnu nastavení programu xterm
+Des:
<!-- DT:Rich -->
<p>Program xtermset umožňuje měnit charakteristiky okna xtermu z příkazového
řádku. Většina voleb má stejná jména jako ty, které se předávají xtermu
při startu.
</p>
-Des:
##----------------------------------------
=Pkg: xvkbd 3.0 29.14 x86_64
=Sum: Virtuální klávesnice pro X window systém
+Des:
<!-- DT:Rich -->
<p>xvkbd je virtuální (grafická) klávesnice pro X Window systém. Lze tak
zadávat znaky do programů pomocí myši.
</p>
-Des:
##----------------------------------------
=Pkg: xz 5.0.3 0.12.1 x86_64
=Sum: Program pro komprimaci souborů
+Des:
<!-- DT:Rich -->
<p>The xz command is a very powerful program for compressing files.
<ul>
<li>Average compression ratio of LZMA is about 30% better than that of gzip, and 15% better than that of bzip2.
</li><li>Decompression speed is only little slower than that of gzip, being two to five times faster than bzip2.
</li><li>In fast mode, compresses faster than bzip2 with a comparable compression ratio.
</li><li>Achieving the best compression ratios takes four to even twelve times longer than with bzip2. However. this doesn&#39;t affect decompressing speed.
</li><li>Very similar command line interface to what gzip and bzip2 have.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: xz-lang 5.0.3 0.12.1 x86_64
=Sum: Program pro komprimaci souborů
+Des:
<!-- DT:Rich -->
<p>The xz command is a very powerful program for compressing files.
<ul>
<li>Average compression ratio of LZMA is about 30% better than that of gzip, and 15% better than that of bzip2.
</li><li>Decompression speed is only little slower than that of gzip, being two to five times faster than bzip2.
</li><li>In fast mode, compresses faster than bzip2 with a comparable compression ratio.
</li><li>Achieving the best compression ratios takes four to even twelve times longer than with bzip2. However. this doesn&#39;t affect decompressing speed.
</li><li>Very similar command line interface to what gzip and bzip2 have.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: yast2 2.17.119 0.5.25 x86_64
=Sum: YaST2 - hlavní balíček
+Del:
<!-- DT:Rich -->
<p>YaST2 je nástroj pro konfiguraci systému SuSE Linux.
Poskytuje jednoduché možnosti konfigurace.
Instalace a konfigurace systému pomocí programu YaST2 je
detailně vysvětlena v průvodní příručce SuSE Linuxu.
Instalace systému pomocí YaST2 nelze provést bez tohoto balíku.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje skripty a data potřebná pro instalaci sytému
SuSE Linux pomocí YaST2.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>YaST2 je nástroj pro konfiguraci systému SuSE Linux.
Poskytuje jednoduché možnosti konfigurace.
Instalace a konfigurace systému pomocí programu YaST2 je
detailně vysvětlena v průvodní příručce SuSE Linuxu.
Instalace systému pomocí YaST2 nelze provést bez tohoto balíku.
</p>
-Ins:
##----------------------------------------
=Pkg: yast2-CASA 1.7.1535 1.38 x86_64
=Sum: YaST2 - Configuration for Novell CASA (Common Authentication Services Adapter)
+Des:
<!-- DT:Rich -->
<p>Novell CASA (Common Authentication Services Adapter) YaST configuration module. This module is designed to assist administrators to configure and enable CASA through YaST after system installation.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-bootloader 2.17.86 0.5.20 x86_64
=Sum: YaST2 - Konfigurace zavaděče
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci zavaděče systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-control-center 2.17.4 0.1.76 x86_64
=Sum: YaST2 - Hlavní menu
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci menu.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-control-center-gnome 2.13.4 1.4.14 x86_64
=Sum: YaST2 - Control Center (GNOME version)
+Des:
<!-- DT:Rich -->
<p>Integrace ovládacího centra programu YaST do prostředí GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-control-center-qt 2.17.4 0.1.76 x86_64
=Sum: YaST2 - Control Center (Qt Version)
+Des:
<!-- DT:Rich -->
<p>This package contains the menu selection component for YaST2 using the Qt toolkit.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-core 2.17.44 0.5.3 x86_64
=Sum: YaST2 - Klíčové knihovny
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje scanner/parser a interpretr pro skriptovací
jazyk YCP programu YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-country 2.17.51 0.5.180 x86_64
=Sum: YaST2 - Národní nastavení (jazyk, klávesnice, časové zóna)
+Des:
<!-- DT:Rich -->
<p>Tento modul obsahuje nastavení, která jsou geograficky a &quot;politicky&quot; závislá - jako je
jazyk, klávesnice nebo časová zóna.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-country-data 2.17.51 0.5.180 x86_64
=Sum: YaST2 - Data files for Country settings
+Des:
<!-- DT:Rich -->
<p>Data files for yast2-country together with the most often used API functions (Language module)
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dbus-client 2.17.0 0.1.65 x86_64
=Sum: YaST2 - Klíčové knihovny
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje scanner/parser a interpretr pro skriptovací
jazyk YCP programu YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dbus-server 2.17.4 0.5.118 x86_64
=Sum: YaST2 - Klíčové knihovny
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje scanner/parser a interpretr pro skriptovací
jazyk YCP programu YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-fingerprint-reader 2.17.7 0.1.201 x86_64
=Sum: YaST2 - Fingerprint Reader Configuration
+Des:
<!-- DT:Rich -->
<p>YaST module for configuration of fingerprint authentication using the thinkfinger library.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-gtk 2.21.98 0.5.80 x86_64
=Sum: YaST2 - Grafické uživatelské prostředí GTK
+Des:
<!-- DT:Rich -->
<p>Jedno z více dostupných grafických prostředí pro YaST2 založené na
GTK a X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-hardware-detection 2.17.2 2.7.1 x86_64
=Sum: YaST2 - Hardware Detection Interface
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje knihovnu hardwarové detekce pro YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-kdump 2.17.21 0.2.13 x86_64
=Sum: Configuration of kdump
+Des:
<!-- DT:Rich -->
<p>Configuration of kdump
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap 2.17.6 0.5.131 x86_64
=Sum: YaST2 - LDAP agent
+Des:
<!-- DT:Rich -->
<p>Agent používaný YaST2-moduly pro přístup na LDAP server a práci s
položkami databáze (prohledávání, přidávání nových prvků, změny a
mazání stávajících atd.)
</p>
-Des:
##----------------------------------------
=Pkg: yast2-libyui 2.21.1 2.5.93 x86_64
=Sum: YaST2 - User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This is the YaST2 user interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p><p>
This can be used independently of YaST2 for generic (C++) applications. This package has very few dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mouse 2.16.1 19.38 x86_64
=Sum: YaST2 - Konfigurace myši
+Des:
<!-- DT:Rich -->
<p>Konfigurační modul pro myš spouštěný ovládacím centrem YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ncurses 2.17.20 0.5.103 x86_64
=Sum: YaST2 - Textové rozhraní
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty pro textově orientované (ncurses)
uživatelské rozhraní v YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ncurses-pkg 2.17.19 0.5.100 x86_64
=Sum: YaST2 - Character Based Package Manager Frontend
+Des:
<!-- DT:Rich -->
<p>This package contains character based (ncurses) frontend of YaST2 package manager
</p>
-Des:
##----------------------------------------
=Pkg: yast2-network 2.17.171 0.5.11 x86_64
=Sum: YaST2 - Konfigurace sítě
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci sítě.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nis-client 2.17.8 0.1.1 x86_64
=Sum: YaST2 - Konfigurace NIS (YP) klienta
+Des:
<!-- DT:Rich -->
<p>Komponenta YaST2 pro konfiguraci NIS (služba podobná tzv. Žlutým
stránkám).
</p>
-Des:
##----------------------------------------
=Pkg: yast2-novell-client 3.0.0 0.9.55 x86_64
=Sum: YaST2 - Novell Client for Linux configuration
+Des:
<!-- DT:Rich -->
<p>This package provides a YaST configuration module to change the settings of the Novell Client for Linux.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-packager 2.17.98 0.5.73 x86_64
=Sum: YaST2 - Knihovna pro manipulaci s balíky
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje scanner/parser a kontrolu závislostí balíků
z YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-perl-bindings 2.17.2 1.32.121 x86_64
=Sum: YaST2 - Vazby na Perl
+Des:
<!-- DT:Rich -->
<p>Tento balíček přidává vestavěný interpreter Perlu do YaST2 jako modul (nahraje se pouze pokud je třeba). Velice efektivní způsob volání Perlu z YaST2 YCP skriptů.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-pkg-bindings 2.17.57 0.5.8 x86_64
=Sum: YaST2 - Package Manager Access
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje jmenný prostor pro přístup
ke knihovnám správce balíčků v programu YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-printer 2.17.63 0.2.43 x86_64
=Sum: YaST2 - Konfigurace tiskárny
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci tiskárny.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-profile-manager 2.17.2 0.7.5 x86_64
=Sum: YaST2 - Profile Configuration
+Des:
<!-- DT:Rich -->
<p>Pomocí správce profilů lze ukládat různé profily konfigurace systému
a přepínat se mezi nimi.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-qt 2.21.5 1.5.29 x86_64
=Sum: YaST2 - Grafické prostředí
+Des:
<!-- DT:Rich -->
<p>Jedno z více dostupných grafických prostředí pro YaST2 založené na
Qt a X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-qt-pkg 2.21.4 2.5.56 x86_64
=Sum: YaST2 - Grafické prostředí
+Des:
<!-- DT:Rich -->
<p>Jedno z více dostupných grafických prostředí pro YaST2 založené na
Qt a X Window System.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-scanner 2.17.5 1.38 x86_64
=Sum: YaST2 - Konfigurace scanneru
+Des:
<!-- DT:Rich -->
<p>This package provides support for the configuration of USB scanners, SCSI scanners, scanners in HP all-in-one devices, and scanning via network (i.e. use a remote scanner via another host in the network).
</p><p>
Parallel port scanners and network scanners (i.e. a scanner which is directly accessible in the network) cannot be configured with this tool, except for such scanners in HP all-in-one devices. Usually those devices must be configured manually. For more information see http://www.sane-project.org/ and the documentation in the package &quot;sane-backends&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-schema 2.17.5 0.5.42 x86_64
=Sum: YaST2 - AutoYaST Schema
+Des:
<!-- DT:Rich -->
<p>Schéma syntaxe AutoYaSTu
</p>
-Des:
##----------------------------------------
=Pkg: yast2-slp 2.16.0 1.37 x86_64
=Sum: YaST2 - SLP Agent and Browser
+Des:
<!-- DT:Rich -->
<p>This modules enables YaST modules to register services with SLP. Additionally, it offers a simple browser of SLP registered services.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-snapper 2.17.13 0.5.23 x86_64
=Sum: YaST - file system snapshots review
+Des:
<!-- DT:Rich -->
<p>YaST module for accessing and managing btrfs system snapshots
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sound 2.17.19 0.7.3 x86_64
=Sum: YaST2 - Konfigurace zvuku
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci zvukové karty.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage 2.17.126 0.5.3 x86_64
=Sum: YaST2 - konfigurace trvalé paměti (pevných disků)
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje soubory pro YaST2, které souvisí s konfigurací pevného disku během
instalace nebo na již nainstalovaném systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage-lib 2.17.126 0.5.3 x86_64
=Sum: YaST2 - Knihovna nastavení úložných zařízení
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje soubory pro YaST2, které souvisí s konfigurací pevného disku během
instalace nebo na již nainstalovaném systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-transfer 2.16.3 0.5.133 x86_64
=Sum: YaST2 - Agent pro různé přenosové protokoly
+Des:
<!-- DT:Rich -->
<p>YaST2 agent pro různé přenosové protokoly, např. FTP, HTTP, TFTP.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tune 2.17.7 1.28 x86_64
=Sum: YaST2 - Hardwarová konfigurace
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje komponenty YaST2 pro konfiguraci hardwaru.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-update 2.17.23 0.5.40 x86_64
=Sum: YaST2 - Aktualizace
+Des:
<!-- DT:Rich -->
<p>Tato komponenta zajišťuje aktualizaci systému.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-users 2.17.51 0.5.166 x86_64
=Sum: YaST2 - Správu uživatelů a skupin
+Del:
<!-- DT:Rich -->
<p>This package is required for easy user creation.
If it is not available, you will have to create user accounts manually with the &#39;useradd&#39; command.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package provides GUI for maintenance of linux users and groups.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-vm 2.17.8 0.5.63 x86_64
=Sum: YaST2 - Virtual Machine Installer
+Des:
<!-- DT:Rich -->
<p>This YaST module configures and installs a virtual machine.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-xml 2.16.1 1.23 x86_64
=Sum: YaST2 - XML agent
+Des:
<!-- DT:Rich -->
<p>YaST2 XML agent
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ycp-ui-bindings 2.21.1 2.5.107 x86_64
=Sum: YaST2 - YCP Bindings for the YaST2 User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This package makes the generic YaST2 user interface engine available for YCP applications (YCP is the scripting language in which most YaST2 modules are written).
</p>
-Des:
##----------------------------------------
=Pkg: yauap 0.2.3 1.36 x86_64
=Sum: The useless audio player
+Des:
<!-- DT:Rich -->
<p>yauap is a simple commandline audio player based on GStreamer.
</p>
-Des:
##----------------------------------------
=Pkg: yelp 2.28.1 1.9.2.7 x86_64
=Sum: Prohlížeč nápovědy GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>&quot;Yelp&quot; je prohlížeč nápovědy pro pracovní prostředí GNOME 2.x. Obsahuje
zdrojové soubory k dokumentům man, info a docbook.
</p>
-Des:
##----------------------------------------
=Pkg: yelp-lang 2.28.1 1.9.2.7 x86_64
=Sum: Prohlížeč nápovědy GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>&quot;Yelp&quot; je prohlížeč nápovědy pro pracovní prostředí GNOME 2.x. Obsahuje
zdrojové soubory k dokumentům man, info a docbook.
</p>
-Des:
##----------------------------------------
=Pkg: yp-tools 2.12 0.2.5 x86_64
=Sum: Utility pro NIS (YP) klienta
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje některé potřebné utility k přístupu na mapy NIS
k testování konfigurace NIS.
</p>
-Des:
##----------------------------------------
=Pkg: ypbind 1.22 1.17 x86_64
=Sum: Démon pro podporu NIS klientů
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje démona ypbind, který připojí NIS klienty
k NIS doméně a dokáže vyhledat nový NIS server, pokud starý neodpovídá.
</p><p>
</p><p>
Ypbind musí běžet na každém stroji, na kterém běží NIS klient.
</p>
-Des:
##----------------------------------------
=Pkg: yudit 2.9.0 71.19.1 x86_64
=Sum: Unicode textový editor
+Des:
<!-- DT:Rich -->
<p>yudit je unicode balíček k editaci a převodu textu do různých jazyků.
</p>
-Des:
##----------------------------------------
=Pkg: zenity 2.28.0 1.1.230 x86_64
=Sum: GNOME dialogový nástroj pro příkazovou řádku
+Des:
<!-- DT:Rich -->
<p>Zenity je základní přepis gdialogu bez
řešení parsování příkazů. Zenity je jako
zen; jednoduchý a snadno ovladatelný.
</p><p>
Zenity dialogy: kalendář, textové pole, chyba, informace,
souborový dialog, seznam, postup, dotaz, textová informace
a varování.
</p><p>
Zenity je velmiužitečný především ve skriptech.
</p>
-Des:
##----------------------------------------
=Pkg: zenity-lang 2.28.0 1.1.230 x86_64
=Sum: GNOME dialogový nástroj pro příkazovou řádku
+Des:
<!-- DT:Rich -->
<p>Zenity je základní přepis gdialogu bez
řešení parsování příkazů. Zenity je jako
zen; jednoduchý a snadno ovladatelný.
</p><p>
Zenity dialogy: kalendář, textové pole, chyba, informace,
souborový dialog, seznam, postup, dotaz, textová informace
a varování.
</p><p>
Zenity je velmiužitečný především ve skriptech.
</p>
-Des:
##----------------------------------------
=Pkg: zip 3.0 4.7.1 x86_64
=Sum: Program pro komprimaci souborů
+Des:
<!-- DT:Rich -->
<p>Zip je program pro komprimaci a archivaci souborů. Je kompatibilní
s programem PKZIP 2.04g (autor Phil Katz) pro systém MSDOS.
</p>
-Des:
##----------------------------------------
=Pkg: ziptool 1.4.0 114.8 x86_64
=Sum: Nástroj pro používání jednotek Iomega ZIP a JAZ
+Des:
<!-- DT:Rich -->
<p>Nástroj pro konfiguraci jednotek Iomega ZIP a JAZ. Podporuje automatické
vysunování a ochranu proti zápisu (i s heslem).
</p>
-Des:
##----------------------------------------
=Pkg: zisofs-tools 1.0.6 138.22 x86_64
=Sum: Uživatelské nástroje pro zisofs
+Des:
<!-- DT:Rich -->
<p>Spolu se systémem zisofs umožňuje tento balík vytvářet souborové systémy
iso9660, které mohou být &quot;za běhu&quot; dekomprimovány na jednotlivé soubory,
což je stále čitelné i pro systém bez podpory zisofs.
</p>
-Des:
##----------------------------------------
=Pkg: zlib 1.2.3 106.34 x86_64
=Sum: Knihovna pro komprimaci dat
+Des:
<!-- DT:Rich -->
<p>Knihovna realizuje dokumenty ftp://ds.internic.net/rfc/rfc1950.txt
(formát zlib), rfc1951.txt (formát deflate) a rfc1952.txt (formát
gzip). Tyto dokumenty jsou dostupné také v jiných formátech na
ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
</p>
-Des:
##----------------------------------------
=Pkg: zlib-32bit 1.2.3 106.34 x86_64
=Sum: Knihovna pro komprimaci dat
+Des:
<!-- DT:Rich -->
<p>Knihovna realizuje dokumenty ftp://ds.internic.net/rfc/rfc1950.txt
(formát zlib), rfc1951.txt (formát deflate) a rfc1952.txt (formát
gzip). Tyto dokumenty jsou dostupné také v jiných formátech na
ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
</p>
-Des:
##----------------------------------------
=Pkg: zlib-devel 1.2.3 106.34 x86_64
=Sum: Obsahuje soubory a knihovny potřebné pro vývoj.
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje všechny nezbytné hlavičkové soubory a knihovny potřebné
pro vývoj aplikací vyžadujících tyto soubory.
</p>
-Des:
##----------------------------------------
=Pkg: zoo 2.10 911.22 x86_64
=Sum: Pack program
+Des:
<!-- DT:Rich -->
<p>Zoo je komprimační a archivační program používající algoritmus
Lempel-Ziv. Množství souborů v operačních systémech DOS a AmigaDOS
a TOS je zabaleno pomocí tohoto komprimačního programu. Nedosahuje
kompresních poměrů programu gzip, proto je vhodný pouze na rozbalování
starých archívů.
</p>
-Des:
##----------------------------------------
=Pkg: zsh 4.3.6 67.5 x86_64
=Sum: Shell s propracovaným doplňováním
+Des:
<!-- DT:Rich -->
<p>Zsh je příkazový interpret (shell) pro Unix. Z obvyklejších shellů se
nejvíce podobá Korn shellu (ksh), ačkoli s ním není zcela kompatibilní.
Obsahuje mnoho různých vylepšení, mimo jiné editor příkazových řádků,
volby pro přizpůsobování jeho chování, expandování jmen souborů,
vlastnosti, kterými se podobá C-shellu (csh) i zvláštní vlastnosti
převzaté z tcsh (další `vylepšený&#39; shell).
</p>
-Des:
##----------------------------------------
=Pkg: zvbi 0.2.33 1.17 x86_64
=Sum: Linux "VBI proxy"
+Des:
<!-- DT:Rich -->
<p>With &quot;video4linux&quot; drivers only one application at a time can capture
VBI data.  The 2nd generation &quot;v4l2&quot; API allows multiple clients to open
a device, but still only one client may read from the device.  If for
example the Nxtvepg daemon runs in the background users will not be able
to start a Teletext application.  The VBI proxy was developed as a
solution to this problem.
</p>
-Des:
##----------------------------------------
=Pkg: zypp-plugin-python 0.3 2.5.38 x86_64
=Sum: Helper that makes writing ZYpp plugins in python easier
+Des:
<!-- DT:Rich -->
<p>This API allows writing ZYpp plugins by just subclassing from a python class
and implementing the commands you want to respond to as python methods.
</p>
-Des:
##----------------------------------------
=Pkg: zypp-plugin-spacewalk 0.5 0.6.41 x86_64
=Sum: Client side Spacewalk integration for ZYpp
+Des:
<!-- DT:Rich -->
<p>This plugin allows a ZYpp powered Linux system to see Spacewalk
subscribed repositories as well as downloading packages from the
a Spacewalk compatible server.
</p>
-Des:
##----------------------------------------
=Pkg: zypper 1.6.161 0.7.19 x86_64
=Sum: Zpráva balíků z příkazové řádky používající Libzypp
+Des:
<!-- DT:Rich -->
<p>Zpráva balíků z příkazové řádky používající Libzypp
</p>
-Des:
##----------------------------------------
=Pkg: zypper-log 1.6.161 0.7.19 x86_64
=Sum: CLI for accessing the zypper logfile
+Des:
<!-- DT:Rich -->
<p>This tool helps you to get the right part of the zypper log. It can query your zypper runs by date and read rotated logfiles.
</p>
-Des:
##----------------------------------------
=Pkg: gst-fluendo-mp3 12 4.7.18 nosrc
=Sum: Gstreamer mp3 plugin from Fluendo
+Des:
<!-- DT:Rich -->
<p>Fully licensed mp3-decoder binary as available from http://shop.fluendo.com free of charge. The source code has a free MIT-like license, as explained in https://core.fluendo.com/gstreamer/svn/trunk/gst-fluendo-mp3/LICENSE
</p>
-Des:
+Eul:
<!-- DT:Rich -->
<p>FLUENDO MP3 PLUG-IN FOR GSTREAMER COMMERCIAL LICENSE
AGREEMENT BY FLUENDO, S.A. (&quot;FLUENDO&quot;)
</p><p>
IMPORTANT - READ CAREFULLY
THE FOLLOWING LICENSE AGREEMENT AS AMENDED FROM TIME TO TIME AND
AVAILABLE WITH THIS PACKAGE (THE &quot;LICENSE AGREEMENT&quot;)GOVERNS THE
DOWNLOADING, INSTALLATION AND/OR USE OF FLUENDO&#39;S PROPRIETARY SOFTWARE
&quot;MP3 PLUG-IN FOR GSTREAMER&quot;, INCLUDING ANY COMPONENTS,
COPIES, UPDATES,ENHANCEMENTS, UPGRADES OR SUBSEQUENT VERSIONS THEREOF
THAT MAY BE RELEASED BY FLUENDO (COLLECTIVELY, THE &quot;SOFTWARE&quot;) AND ANY
ACCOMPANYING MANUALS, HELP FILES AND DOCUMENTATION (THE &quot;DOCUMENTATION&quot;).
PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT AS BY
DOWNLOADING, USING AND/OR INSTALLING THE SOFTWARE YOU (THE &quot;LICENSEE&quot;)
CONSENT AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS
LICENSE AGREEMENT. YOU MAY DOWNLOAD, INSTALL AND/OR USE THE SOFTWARE
SUBJECT TO THOSE TERMS AND CONDITIONS AND TO ANY APPLICABLE LAW, BEING
SOLELY LIABLE FOR ANY BREACH THEREOF. IF YOU DO NOT AGREE TO THIS
LICENSE AGREEMENT, FLUENDO DOES NOT GRANT ANY LICENSE TO YOU FOR THE
SOFTWARE AND YOU MAY NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE.
</p><p>
GRANT OF LICENSE AND RESTRICTIONS<ol>
<li>Subject to the Licensee&#39;s acceptance and continued compliance with
this License Agreement, Fluendo hereby grants the
Licensee a non-exclusive, non-transferable limited license to install,
use or otherwise benefit from the functionality of the Software in the
manner and for the purposes described in the Documentation, on a per
computer basis.

</li><li>Except as expressly authorized by Fluendo in writing, it is forbidden to:
(i)   decompile, reverse engineer, disassemble or decode the Software
or any copy, adaptation, transcription or merged portion of the
Software;
(ii)  attempt to ascertain the source code of the Software or any of its
components by any means, nor modify, adapt, translate or create
derivative works based on the Software;
(iii) tamper or interfere with the functionality, delivery or operation
of the Software while using or installing it;
(iv)  sell, resell, rent, lease, distribute, transfer, assign, sublicense
or otherwise deal with the Software, its components, the Documentation
or any of the rights granted under this License Agreement;
(v)   duplicate, reproduce or copy (except for reasonable backup purposes)
the Software or the Documentation; or
(vi)  export or re-export the Software, directly or indirectly, into any
country prohibited by law.

</li><li>It is prohibited to modify, remove, suppress, or in any other way make
inconspicuous the copyright, digital fingerprints, watermarks,
identification labels, legal notices contained within the Software or
other technical protection devices or data identifying Fluendo&#39;s or its
licensors rights in the Software, its files or its components.

</li><li>No right is granted herein to any third party to use the Software, to
the Licensee to use the Software for any third party, or to the Licensee
to utilize the Software for any purpose whatsoever not described herein.
</li></ol>
OWNERSHIP<ol>
<li>Save for the right to use the Software and the Documentation
expressly provided for in this License Agreement, the Licensee agrees
and acknowledges that all title to and rights in the Software, its
components, structure, databases, source code or design, and in the
Documentation, including without limitation all copyright trademarks,
trade secrets, patents, and all other intellectual or industrial
property rights and other confidential or proprietary information
contained therein remain the property of Fluendo or its licensors.
</li></ol>
LIABILITY<ol>
<li>TO THE MAXIMUM EXTENT PERMITTED BY LAW, AND PROVIDED THAT LIABILITY
SHALL NOT BE EXCLUDED OR LIMITED IN RESPECT OF MALICIOUS INTENT OR GROSS
NEGLIGENCE, FLUENDO HEREBY EXCLUDES ALL LIABILITY IN RESPECT OF:
</li></ol>
a) ANY LOSS, DAMAGES, CLAIMS OR COSTS WHATSOEVER INCLUDING ANY
CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES, ANY LOST PROFITS OR LOST
SAVINGS, ANY DAMAGES RESULTING FROM BUSINESS INTERRUPTION, OR CLAIMS BY
A THIRD PARTY, EVEN IF A FLUENDO REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH LOSS, DAMAGES, CLAIMS OR COSTS.
b) DAMAGES, CLAIMS OR LIABILITIES ARISING OUT OF ANY OF THE FOLLOWING:
(i)   THE CONTENT (INCLUDING WITHOUT LIMITATION ITS NATURE OR ANY
INTELLECTUAL PROPERTY RIGHTS THEREIN) AND/OR ANY OTHER DATA, IMAGES,
VIDEOS OR SOUNDS WHATSOEVER THAT THE LICENSEE MAY ACCESS OR TRANSMIT
USING THE SOFTWARE;
(ii)  LIABILITY TO ANY EMPLOYER, PRINCIPAL, CLIENT, LESSOR OR PROVIDER OF
COMPUTER EQUIPMENT OR FACILITIES, ARISING OUT OF THE INSTALLATION OF OR
USE OF THE SOFTWARE;
(iii) ANY CHARGES WHICH THE LICENSEE MAY INCUR TO ANY TELECOMMUNICATIONS
SERVICE OR NETWORK.
<ol>
<li>FLUENDO EXPRESSLY EXCLUDES ALL LIABILITY IN CONNECTION WITH ANY THIRD
PARTY APPLICATIONS OR THIRD PARTY COMPONENTS THAT MAY BE INCLUDED WITHIN
THE SOFTWARE, OR YOUR USE THEREOF.

</li><li>TO THE MAXIMUM EXTENT PERMITTED BY LAW, FLUENDO&#39;S AGGREGATE LIABILITY
AND THAT OF ITS AFFILIATES AND SUPPLIERS UNDER OR IN CONNECTION WITH
THIS LICENSE AGREEMENT WILL BE LIMITED IN ANY CASE TO THE AMOUNT PAID
FOR THE SOFTWARE, IF ANY, OR, IF HIGHER, TO THE MINIMUM AMOUNT
STIPULATED BY A COMPULSORY LAW.
</li></ol>
INDEMNITY<ol>
<li>BY DOWNLOADING, INSTALLING, USING OR UNINSTALLING THE SOFTWARE, THE
LICENSEE HEREBY AGREES TO, AT ITS OWN EXPENSE, INDEMNIFY, DEFEND AND
HOLD HARMLESS FLUENDO, ITS PARENTS, SUBSIDIARIES AND AFFILIATES, ITS
BUSINESS PARTNERS, AND ITS AND THEIR RESPECTIVE DIRECTORS, OFFICERS,
EMPLOYEES AND AGENTS FROM AND AGAINST ANY AND ALL LOSSES, DAMAGES,
INJURIES, CAUSES OF ACTION, CLAIMS, DEMANDS AND EXPENSES, INCLUDING
LEGAL FEES AND EXPENSES, OF WHATEVER KIND OR NATURE ARISING OUT OF,
RELATING TO OR RESULTING FROM ANY CLAIM ARISING FROM OR RELATING TO (I)
ANY BREACH BY THE LICENSEE OF THIS LICENSE AGREEMENT; OR (II) THE
LICENSEE&#39;S DOWNLOAD, INSTALLATION, USE OR UNINSTALLATION OF THE
SOFTWARE.
</li></ol>
TERMINATION<ol>
<li>This grant of license begins upon acceptance by the Licensee, either
expressly or through use or possession of the Software, and shall
continue until terminated as provided in this License Agreement.

</li><li>The Licensee may terminate this License Agreement at any time by
uninstalling the Software and destroying all copies of the Software.
Upon any termination, the Licensee agrees to uninstall the Software and
return or destroy all copies of the Software, the Documentation, and all
other associated materials.

</li><li>The Licensee&#39;s failure to comply with any of the terms and conditions
of this License Agreement terminates the Licensee&#39;s right to use the
Software and/or the Documentation, and the Licensee will not receive a
refund.
</li></ol>
CONFIDENTIALITY<ol>
<li>The Software, the Documentation, the terms of this License Agreement
and any other related material or data disclosed by Fluendo to the
Licensee will be confidential (&quot;Confidential Information&quot;) and the
Licensee will not disclose such Confidential Information in any form to
any third party without the express written consent of Fluendo, except
to the extent that such information: (a) is previously known to the
Licensee; (b) becomes publicly known or independently generated through
no breach of this obligation; (c) is acquired by the Licensee from a
third party which was not under an obligation to Fluendo not to disclose
such information; or (d) is required to be disclosed by a court or
regulatory or legislative order or provision.

</li><li>The Licensee will keep the Software and the Documentation in
confidence in perpetuity, will take all measures necessary to protect
and maintain the confidential and proprietary character of the Software
and the Documentation, and will indemnify Fluendo from all losses and
damages resulting from unauthorized or improper disclosure,
dissemination or use of the Software or the Documentation, as a result,
in whole or in part, of the Licensee&#39;s action or inaction.
</li></ol>
GENERAL<ol>
<li>This License Agreement contains the entire agreement between the
Licensee and Fluendo with respect to the subject matter hereof and
supersedes all prior agreements, negotiations, representations of any
kind and proposals, written and oral, relating to its subject matter.

</li><li>If any provision of this License Agreement is declared by a court of
competent jurisdiction to be invalid, illegal or unenforceable, such
provision shall be severed from this License Agreement and the other
provisions shall remain in full force and effect.

</li><li>All notices given by either party to the other pursuant to this
License Agreement shall be in writing and delivered at its principal
place of business by fax or delivery service (in either case with
acknowledgement of receipt).

</li><li>The waiver or failure of Fluendo to exercise in any respect any
rights provided for in this License Agreement shall not be deemed a
waiver of any actual or further right under this License Agreement.

</li><li>This License Agreement shall be governed by and construed in
accordance with the laws of Spain, and the parties submit to the
exclusive jurisdiction of the Courts and Tribunals of Barcelona in
connection with all matters arising under this License Agreement.
</li></ol>
FLUENDO, S.A.
C.I.F.: A-64001217
World Trade Center Edificio Norte, 2 pl.
08039 Barcelona
</p>
-Eul:
##----------------------------------------
=Pkg: adns 1.4 73.21 src
=Sum: Advanced Easy-to-Use Asynchronous-Capable DNS Utilities
+Des:
<!-- DT:Rich -->
<p>adns obsahuje sbírku užitečných nástrojů pro DNS resolver.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor 2.5.1.r1445 55.57.47 src
=Sum: AppArmor parsovací nástroj uživatelské úrovně
+Des:
<!-- DT:Rich -->
<p>The AppArmor Parser is a userlevel program that is used to load in
program profiles to the AppArmor Security kernel module.
</p><p>
This package is part of a suite of tools that used to be named
SubDomain.
</p>
-Des:
##----------------------------------------
=Pkg: apparmor-admin_en 10.3 8.24.1 src
=Sum: AppArmor Admin Guide (English)
+Des:
<!-- DT:Rich -->
<p>AppArmor Administration Guide (English).
</p>
-Des:
##----------------------------------------
=Pkg: aspell-dictionaries 0.50.6 2.16 src
=Sum: The Source Package for Official Aspell Dictionaries
+Des:
<!-- DT:Rich -->
<p>This source package contains dictionaries from http://aspell.net/
that are distributable under the GPL license.
</p>
-Des:
##----------------------------------------
=Pkg: augeas 0.8.1 7.8.2 src
=Sum: A library for changing configuration files
+Des:
<!-- DT:Rich -->
<p>A library for programmatically editing configuration files. Augeas parses
configuration files into a tree structure, which it exposes through its
public API. Changes made through the API are written back to the initially
read files.
</p><p>
The transformation works very hard to preserve comments and formatting
details. It is controlled by ``lens&#39;&#39; definitions that describe the file
format and the transformation into a tree.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-glib2 0.6.23 13.19.26 src
=Sum: D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: babl 0.0.22 4.22 src
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: bind 9.6ESVR5P1 0.8.1 src
=Sum: DNS (Domain Name System) server (named)
+Des:
<!-- DT:Rich -->
<p>BIND (Berkeley Internet Name Domain) je implementace DNS (Domain Name System) protokolu. Obsahuje imp,kementaci všech hlavních komponent DNS. Tento balíček obsahuje komponenty pro práci s DNS serverem.
</p>
-Des:
##----------------------------------------
=Pkg: blocxx 2.1.0.342 122.6 src
=Sum: BloCXX--C++ framework pro vývoj aplikací
+Des:
<!-- DT:Rich -->
<p>BloCXX je obecný C++ framework pro vývoj aplikací. Tento balík obsahuje knihovnu BloCXX.
</p>
-Des:
##----------------------------------------
=Pkg: boost 1.36.0 11.17 src
=Sum: C++ knihovny Boost
+Des:
<!-- DT:Rich -->
<p>Boost provides free peer-reviewed portable C++ source
libraries. The emphasis is on libraries that work well with the C++
Standard Library. One goal is to establish &quot;existing practice&quot; and
provide reference implementations so that the Boost libraries are
suitable for eventual standardization. Some of the libraries have
already been proposed for inclusion in the C++ Standards Committee&#39;s
upcoming C++ Standard Library Technical Report.
</p><p>
Although Boost was begun by members of the C++ Standards Committee
Library Working Group, membership has expanded to include nearly two
thousand members of the C++ community at large.
</p><p>
This package is mainly needed for updating from a prior version, the dynamic libraries are found in their respective package. For development using Boost, you
also need the boost-devel package. For documentation, see the boost-doc package.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-branding-openSUSE 3.1 47.22 src
=Sum: Výchozí téma zavaděče SUSE
+Des:
<!-- DT:Rich -->
<p>Balík přidává výchozí téma zavaděče systému SUSE.
Více informací viz: http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bsdtar 2.5.5 5.19 src
=Sum: Bsdtar is a programme that can create and read several different streaming archive formats
+Des:
<!-- DT:Rich -->
<p>Libarchive is a programming library that can create and read several different
streaming archive formats, including most popular tar variants and several cpio
formats. It can also write shar archives and read ISO9660 CDROM images. The
bsdtar program is an implementation of tar(1) that is built on top of
libarchive. It started as a test harness, but has grown and is now the standard
system tar for FreeBSD 5 and 6.
</p><p>
This package contains the bsdtar cmdline utility.
</p>
-Des:
##----------------------------------------
=Pkg: clutter 1.0.6 1.1.66 src
=Sum: The clutter library
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: clutter-gtk 0.10.2 2.1.88 src
=Sum: The Clutter library for Gtk
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
Gtk+ support.
</p>
-Des:
##----------------------------------------
=Pkg: cmpi-bindings 0.4.0 6.1.78 src
=Sum: Adapter to write and run CMPI-type CIM providers
+Des:
<!-- DT:Rich -->
<p>Adapter to write and run CMPI-type CIM providers
</p>
-Des:
##----------------------------------------
=Pkg: colorblind 0.0.1 1.1.43 src
=Sum: Pixel Filter for colorblind accessibility
+Des:
<!-- DT:Rich -->
<p>This library provides an unified way to recalculate colors
in order to present alternative views on images for colorblind
people.
</p>
-Des:
##----------------------------------------
=Pkg: compat 2009.1.19 1.8 src
=Sum: Knihovny pro zajištění kompatibility
+Des:
<!-- DT:Rich -->
<p>Contains old libraries possibly needed for programs not part of SUSE.
</p>
-Des:
##----------------------------------------
=Pkg: ding-libs 0.1.2 1.6.1 src
=Sum: "Ding is not GLib" assorted utility libraries
+Des:
<!-- DT:Rich -->
<p>Assorted C utility libraries: libcollection, libdhash, libini_config, librefarray and libpath_utils.
</p>
-Des:
##----------------------------------------
=Pkg: djvulibre 3.5.21 1.24 src
=Sum: Volně šiřitelná implementace DjVu
+Des:
<!-- DT:Rich -->
<p>DjVu je softwarová platforma a webově orientovaný formát pro distribuci
dokumentů a obrázků.  DjVuLibr je volně šiřitelná (pod GPL) implementace
DjVu, včetně prohlížeče, zásuvných modulů, dekodéru a dalších utilit. DjVu
může nahradit PDF, PS, TIFF, JPEG a GIF při distribuci naskenovaných
nebo digitálních dokumentů a obrázků ve vysokém rozlišení. DjVu obsah se rychleji
stahuje i zobrazuje. Vypadá hezky na monitoru a vyžaduje méně systémových zdrojů.
Najdete ho na řadě akademických, vládních, komerčních i nekomerčních stránkách.
</p>
-Des:
##----------------------------------------
=Pkg: esound 0.2.41 3.1.41 src
=Sum: A sound daemon for Enlightenment and GNOME
+Des:
<!-- DT:Rich -->
<p>Zvukový démon esound, který umí multiplexovat a používat
vyrovnávací paměť. Umí použít ALSA nebo OSS pro zvukový
výstup. K přehrávání a zaznamenávání zvuků ho využívá mnoho
projektů jako Enlightenment nebo GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: exempi 2.0.2 2.22 src
=Sum: XMP support library
+Des:
<!-- DT:Rich -->
<p>XMP parsing and IO library
</p>
-Des:
##----------------------------------------
=Pkg: exiv2 0.17.1 31.20 src
=Sum: Tool to access image Exif metadata
+Des:
<!-- DT:Rich -->
<p>Exiv2 is a command line utility to access image metadata from tags like Exif.
</p>
-Des:
##----------------------------------------
=Pkg: farsight2 0.0.16 1.1.169 src
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: flac 1.2.1 68.15 src
=Sum: FLA (Free Lossless Audio) kodek
+Des:
<!-- DT:Rich -->
<p>FLAC je svobodný bezztrátový zvukový kodek vyvinutý Joshem Coalsonem.
</p>
-Des:
##----------------------------------------
=Pkg: ftgl 2.1.2.99.5 20.10.55 src
=Sum: Library for Using Arbitrary Fonts in OpenGL Applications
+Des:
<!-- DT:Rich -->
<p>FTGL is a free open source library that enables developers to use arbitrary fonts in their OpenGL (www.opengl.org) applications.
</p><p>
Unlike other OpenGL font libraries, FTGL uses standard font file formats, so there is no need of a preprocessing step to convert the high quality font data into a lesser quality, proprietary format.
</p><p>
FTGL uses the Freetype (www.freetype.org) font library to open and &#39;decode&#39; the fonts. It then takes that output and stores it in a format that is most efficient for OpenGL rendering.
</p><p>
The supported rendering modes are:
<ul>
<li>Bit maps

</li><li>Antialiased Pix maps

</li><li>Outlines

</li><li>Polygon meshes

</li><li>Extruded polygon meshes

</li><li>Texture maps

</li><li>Buffer maps
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: gcc33 3.3.3 11.9 src
=Sum: The GNU C Compiler Version 3.3(evaluation)
+Des:
<!-- DT:Rich -->
<p>using the additional packages gcc33-libs, gcc33-c++, gcc33-g77 and gcc33-objc,
you can also complile C++, Fortran 77 and Objective C.
</p><p>
NOTE: This package is for evaluation and testing purposes only!
</p>
-Des:
##----------------------------------------
=Pkg: gcc46 4.6.1_20110701 0.13.9 src
=Sum: GNU překladač jazyka C a pomocné soubory
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language
frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and gcc-obj-c++.
</p>
-Des:
##----------------------------------------
=Pkg: gegl 0.0.20 1.35 src
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: geoclue 0.11.1 1.6.130 src
=Sum: Modular Geoinformation Service
+Des:
<!-- DT:Rich -->
<p>Geoclue is a modular geoinformation service built on top of the D-Bus
messaging system. The goal of the Geoclue project is to make creating
location-aware applications as simple as possible.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-branding-openSUSE 2.16 47.4.1 src
=Sum: Definition of GNOME Default Applications
+Des:
<!-- DT:Rich -->
<p>This branding-style package sets default applications in GNOME in openSUSE.
</p>
-Des:
##----------------------------------------
=Pkg: gmime 2.2.23 1.50.1 src
=Sum: MIME Library Utilities
+Des:
<!-- DT:Rich -->
<p>GMime je sada utilit pro analýzu a vytváření zpráv pomocí
MIME (Multipurpose Internet Mail Extension).
</p>
-Des:
##----------------------------------------
=Pkg: gobject-introspection 0.6.5 1.1.67 src
=Sum: GObject Introspection Tools
+Des:
<!-- DT:Rich -->
<p>The goal of the project is to describe the APIs and collect them in
a uniform, machine readable format.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz-plugins 2.20.2 6.33 src
=Sum: Nástroje pro vizualizaci grafů
+Des:
<!-- DT:Rich -->
<p>Sbírka nástrojů a tcl balíků pro práci s grafy
(grafy ve smyslu uzly a hrany, ne sloupcové grafy).
</p>
-Des:
##----------------------------------------
=Pkg: gssdp 0.7.0 1.1.202 src
=Sum: Library for resource discovery and announcement over SSDP
+Des:
<!-- DT:Rich -->
<p>gssdp offers a GObject-based API for handling resource discovery and
announcement over SSDP.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-vnc 0.3.9 1.1.215 src
=Sum: A GTK widget for VNC clients
+Des:
<!-- DT:Rich -->
<p>gtk-vnc is a VNC viewer widget for GTK+. It is built using coroutines
allowing it to be completely asynchronous while remaining single threaded.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview 2.8.2 0.1.195 src
=Sum: GTK+ 2.0 widget pro editaci zdrojových kódů
+Des:
<!-- DT:Rich -->
<p>GtkSourceView je textový widget rozšiřující standardní GTK+ 2.x
textový widget GtkTextView.
</p><p>
Vylepšuje GtkTextView o kontrolu syntaxe a další funkce
editoru zdrojových kódů.
</p>
-Des:
##----------------------------------------
=Pkg: gupnp 0.13.0 1.1.193 src
=Sum: Implementation of the UPnP specification
+Des:
<!-- DT:Rich -->
<p>GUPnP implements the UPnP specification: resource announcement and
discovery, description, control, event notification, and presentation
(GUPnP includes basic web server functionality through libsoup). GUPnP
does not include helpers for construction or control of specific
standardized resources (e.g. MediaServer); this is left for higher level
libraries utilizing the GUPnP framework.
</p>
-Des:
##----------------------------------------
=Pkg: gupnp-igd 0.1.3 2.1.183 src
=Sum: Library to handle UPnP IGD port mapping
+Des:
<!-- DT:Rich -->
<p>gupnp-igd is a library to handle UPnP IGD port mapping. It is supposed
to have a very simple API.
</p>
-Des:
##----------------------------------------
=Pkg: imap 2006c1_suse 68.8 src
=Sum: Poštovní server pro IMAP4, POP2 a POP3
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje servery pro IMAP4, POP2 a POP3.
</p><p>
Po nainstalování musíte aktivovat servery v souboru /etc/inetd.conf
</p>
-Des:
##----------------------------------------
=Pkg: installation-images 11.171 0.42.12 src
=Sum: Instalace souborů obrázků
+Des:
<!-- DT:Rich -->
<p>Obrazy instalačních souborů (zavádědí disk a disk s moduly, kořenový obraz,
adresář suse/inst-sys).
</p>
-Des:
##----------------------------------------
=Pkg: jasper 1.900.1 134.11.1 src
=Sum: Implementace JPEG-2000 standardů, část 1
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje implemetaci komprese obrázků standardu JPEG-2000,
část 1. Skládá se z konvertních nástrojů a formátů JP2 a JPC.
</p>
-Des:
##----------------------------------------
=Pkg: kde3-i18n 3.5.10 18.6.2 src
=Sum: English (UK) translations for KDE
+Des:
<!-- DT:Rich -->
<p>Všechno pro pracovní plochu v britské angličtině. Tento balíček obsahuje
aplikace, překlady, soubory s nápovědou a ukázky obrazovek.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n 4.3.5 0.2.58 src
=Sum: English translations for KDE
+Des:
<!-- DT:Rich -->
<p>All the requirements for a desktop in British English. This package contains application translations, help files, and screenshots.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4 4.3.5 0.3.30 src
=Sum: kdeartwork base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdeartwork4-noarch 4.3.5 0.3.31 src
=Sum: kdeartwork base package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdeartwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3 3.5.10 20.31 src
=Sum: Základní komponenty KDE
+Des:
<!-- DT:Rich -->
<p>Tento balík obsahuje kdebase, jeden ze základních balíků K Desktop
Entvironments. K dispozici jsou kromě jiného Kwin, správce oken KDE;
KControl, konfigurační program; Konqueror, prohlížeč KDE; a mnoho ostatních
potřebných programů.
</p><p>
Tento balík není potřeba v případě, kdy KDE programy
jsou spouštěny jinými správci oken, ale nepoužívají pracovní plochu KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdeedu4 4.3.5 0.2.44 src
=Sum: General Data for KDE Education Applications
+Des:
<!-- DT:Rich -->
<p>This package contains data which is required by the KDE education library.
</p>
-Des:
##----------------------------------------
=Pkg: kdeedu4-noarch 4.3.5 0.2.26 src
=Sum: General Data for KDE Education Applications
+Des:
<!-- DT:Rich -->
<p>This package contains data which is required by the KDE education library.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks 4.3.5 0.1.60 src
=Sum: Default Card Decks for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains the default card deck set for KDE games.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4-experimental 4.3.5 0.1.64 src
=Sum: Základní knihovny KDE
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries of the K Desktop Environment.
It contains the necessary libraries for the KDE desktop that do not have
their API frozen yet and may therefore not keep backwards compatibility.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork4 4.3.5 0.4.1 src
=Sum: KDE Network Base Package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages which are built from the kdenetwork module.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3 3.5.10 8.30 src
=Sum: Správa osobních informací pro KDE
+Des:
<!-- DT:Rich -->
<p>Balíček obsahuje Kontact a jednotlivé aplikace správy osobních informace.
<ul>
<li>Kontact--správce osobních informací (PIM)
</li><li>KMail--poštovní klient
</li><li>KOrganizer--kalendář a plánovač
</li><li>KNode--čtení novinek
</li><li>Kleopatra a KWatchGnuPG--správce certifikací
</li><li>Různí průvodci pro připojení k groupwarovým serverům
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdesdk4 4.3.5 0.1.73 src
=Sum: KDE SDK Package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages, built from the kdesdk module.
</p>
-Des:
##----------------------------------------
=Pkg: kdetoys4 4.3.5 0.1.74 src
=Sum: Kdetoys Base Package
+Des:
<!-- DT:Rich -->
<p>This package suggests the packages, built from the kdetoys module.
</p>
-Des:
##----------------------------------------
=Pkg: kdeutils4 4.3.5 0.1.63 src
=Sum: Base Package of KDE Utility Programs
+Des:
<!-- DT:Rich -->
<p>This package suggest all KDE utility programs which are created from this module.
</p>
-Des:
##----------------------------------------
=Pkg: krusader 1.99.1.svn6082 4.25 src
=Sum: Správce souborů
+Des:
<!-- DT:Rich -->
<p>An advanced twin panel (commander style) file manager for KDE.
</p>
-Des:
##----------------------------------------
=Pkg: latex2html 2002.2.1 604.31 src
=Sum: LaTeX2HTML Converter
+Des:
<!-- DT:Rich -->
<p>LaTeX2HTML lets you easily convert basic LaTeX documents
into the HTML format. This allows both a written and
online version even of older LaTeX texts.
</p><p>
Find documentation in /usr/share/doc/packages/latex2html.
</p>
-Des:
##----------------------------------------
=Pkg: ldapcpplib 0.3.0 0.6.88 src
=Sum: C++ API pro LDAPv3
+Des:
<!-- DT:Rich -->
<p>C++ API pro LDAPv3
</p><p>
</p><p>
Dokumentace je uložena v
/usr/share/doc/packages/ldapcpplib/srcdoc.
</p>
-Des:
##----------------------------------------
=Pkg: lib3ds 1.3.0 2.8 src
=Sum: Import and Export of Autodesk 3DS Files
+Des:
<!-- DT:Rich -->
<p>Lib3ds is a free alternative to Autodesk&#39;s 3DS File Toolkit for handling
3DS files. Its main goal is to simplify the creation of 3DS import and
export filters.
</p>
-Des:
##----------------------------------------
=Pkg: libHX 1.23 4.1.1 src
=Sum: General-purpose Library
+Des:
<!-- DT:Rich -->
<p>A library for:
A library for:<ul>
<li>A+R/B trees to use for lists or maps (associative arrays)
</li><li>Deques (double-ended queues) (Stacks (LIFO) / Queues (FIFOs))
</li><li>platform independent opendir-style directory access
</li><li>platform independent dlopen-style shared library access
</li><li>auto-storage strings with direct access
</li><li>command line option (argv) parser
</li><li>shell-style config file parser
</li><li>platform independent random number generator with transparent
/dev/urandom support
</li><li>various string, memory and zvec ops
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libass 0.9.12 1.5.17 src
=Sum: Portable Library for SSA/ASS Subtitles Rendering
+Des:
<!-- DT:Rich -->
<p>libass is a portable subtitle renderer for the ASS/SSA
(Advanced Substation Alpha/Substation Alpha) subtitle
format. It is mostly compatible with VSFilter.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle 0.3.5.1 7.27 src
=Sum: Beagle C Interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libcanberra 0.18 2.1.225 src
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcap 2.11 2.17.1 src
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>Capabilities are a measure to limit the omnipotence of the superuser.
Currently a program started by root or setuid root has the power to
do anything.
Capabilities (Linux-Privs) provide a more fine-grained access control.
Without kernel patches, you can use this library to drop capabilities within
setuid binaries.
If you use patches, this can be done automatically by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: libcap-ng 0.6.3 1.7.1 src
=Sum: An alternate POSIX capabilities library
+Des:
<!-- DT:Rich -->
<p>Libcap-ng is a library that makes using posix capabilities easier
</p>
-Des:
##----------------------------------------
=Pkg: libcddb 1.3.0 67.15 src
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio 0.80 6.11 src
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libchamplain 0.4.0 1.2.84 src
=Sum: Library to display maps
+Des:
<!-- DT:Rich -->
<p>Libchamplain is a C library providing a ClutterActor to display maps. It
also provides a Gtk+ widget to display maps in Gtk+ applications.
</p><p>
It supports numerous free map sources such as OpenStreetMap,
OpenAerialMap and Maps for free.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco 0.6.1 120.16 src
=Sum: Knihovna parseru CSS2
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model-like API.
</p>
-Des:
##----------------------------------------
=Pkg: libdaemon 0.12 31.6 src
=Sum: Lightweight C library That Eases the Writing of UNIX Daemons
+Des:
<!-- DT:Rich -->
<p>libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts:
<ul>
<li>A wrapper around fork() that does the correct daemonization procedure of a process
</li><li>A wrapper around syslog() for simpler log output compatible with syslog or STDERR
</li><li>An API for writing PID files
</li><li>An API for serializing UNIX signals into a pipe for usage with select() or poll()
</li><li>An API for running subprocesses with STDOUT and STDERR redirected to syslog
</li></ul>
APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal.
</p>
-Des:
##----------------------------------------
=Pkg: libdmxview 0.1.0 4.17 src
=Sum: DMX viewing library
+Des:
<!-- DT:Rich -->
<p>Library for efficiently viewing and controlling remote desktop sessions.
</p>
-Des:
##----------------------------------------
=Pkg: libdv 1.0.0 80.28 src
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav 4.1.3 1.16 src
=Sum: A DVD Navigation Library
+Des:
<!-- DT:Rich -->
<p>Tato knihovna obsahuje funkce pro zobrazení menu na video DVD discích.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdread 4.1.3 1.22 src
=Sum: Library for Reading DVD Video Images
+Des:
<!-- DT:Rich -->
<p>This package contains shared libraries for accessing DVD images
(this package does not contain DeCSS algorithms).
</p>
-Des:
##----------------------------------------
=Pkg: libevent 1.4.5 24.21 src
=Sum: Library Providing an Event Handling API
+Des:
<!-- DT:Rich -->
<p>The libevent library provides a mechanism to execute a function when a
specific event on a file descriptor occurs or after a given time has passed.
</p>
-Des:
##----------------------------------------
=Pkg: libfprint 0.0.6 18.20.1 src
=Sum: Library for fingerprint reader support
+Des:
<!-- DT:Rich -->
<p>The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices. The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt 1.5.0 0.13.14 src
=Sum: Šifrovací knihovna GNU
+Des:
<!-- DT:Rich -->
<p>Libgcrypt je obecná šifrovací knihovna vycházející z GnuPG (alfa verze).
</p>
-Des:
##----------------------------------------
=Pkg: libgda 4.1.2 1.3.48 src
=Sum: Knihovna GNU Data Access (GDA)
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) je pokus o vytvoření jednotného přístupu k
různým typům zdrojů dat (databáze, informační servery, tiskové fronty...).
Jedná se o kompletní architekturu, která nabízí vše co potřebujete pro
přístup k datům. Je definovaná jako sada rozhraní CORBA, které jsou obecné
jak jen to je možné (ale zároveň velece výkonné), takže lze pomocí nich
přistupovat k libovolným zdrojům dat.
</p>
-Des:
##----------------------------------------
=Pkg: libgme 0.5.5 7.5.43 src
=Sum: Collection of video game music file emulators
+Des:
<!-- DT:Rich -->
<p>Game_Music_Emu is a collection of video game music file emulators that support
the following formats and systems:<ul>
<li>AY: ZX Spectrum/Amstrad CPC
</li><li>GBS: Nintendo Game Boy
</li><li>GYM: Sega Genesis/Mega Drive
</li><li>HES: NEC TurboGrafx-16/PC Engine
</li><li>KSS: MSX Home Computer/other Z80 systems (doesn&#39;t support FM sound)
</li><li>NSF/NSFE: Nintendo NES/Famicom (with VRC 6, Namco 106, and FME-7 sound)
</li><li>SAP: Atari systems using POKEY sound chip
</li><li>SPC: Super Nintendo/Super Famicom
</li><li>VGM/VGZ: Sega Master System/Mark III, Sega Genesis/Mega Drive,BBC Micro
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libgpg-error 1.10 0.7.29 src
=Sum: Library That Defines Common Error Values for All GnuPG Components
+Des:
<!-- DT:Rich -->
<p>This is a library that defines common error values for all GnuPG
components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon, and possibly more in the future.
</p>
-Des:
##----------------------------------------
=Pkg: libgpod 0.8.2 3.5.175 src
=Sum: Library to Manipulate Songs and Playlists Stored on an iPod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. It
provides an easy-to-use API to retrieve the list of files and playlist
stored on an iPod, modify them, and save them back to the iPod.
</p>
-Des:
##----------------------------------------
=Pkg: libgsm 1.0.12 2.21 src
=Sum: GSM 06.10 Lossy Speech Compressor Library and Utilities
+Des:
<!-- DT:Rich -->
<p>Contains libraries and binaries for a GSM speech compressor.
libgsm contains a standard implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s.
GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility with typical UNIX applications, our implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker recognition. Even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate).
The interfaces offered are a front-end modeled after compress(1) and a library API.  Compression and decompression run faster than real-time on most SPARC stations.  The implementation has been verified against the ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgssglue 0.1 20.2.1 src
=Sum: Generická GSSAPI knihovna
+Des:
<!-- DT:Rich -->
<p>This library exports a gssapi interface, but does not implement any gssapi
mechanisms itself. Instead it calls gssapi routines in other libraries,
depending on the mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: libical 0.43 1.9.1 src
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF&#39;s iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libimobiledevice 1.1.1 7.24.94 src
=Sum: Native protocols library for iPhone, iPod Touch and iPad
+Des:
<!-- DT:Rich -->
<p>libimobiledevice is a software library that talks the protocols to support
iPhone, iPod Touch and iPad devices. Unlike other projects, it does not depend
on using any existing `.dll` or `.so` libraries from Apple.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser 2.17 87.17 src
=Sum: Library to parse ini files
+Des:
<!-- DT:Rich -->
<p>Libiniparser offers parsing of ini files from the C level.
</p>
-Des:
##----------------------------------------
=Pkg: libjingle 0.3.11 7.14 src
=Sum: Library for Peer-to-Peer Applications
+Des:
<!-- DT:Rich -->
<p>Libjingle is a collection of open-source C++ code and sample applications that enables you to build a peer-to-peer application.
</p>
-Des:
##----------------------------------------
=Pkg: libkate 0.4.1 11.12.18 src
=Sum: A karaoke and text codec for embedding in Ogg
+Des:
<!-- DT:Rich -->
<p>Kate is a codec for karaoke and text encapsulation for Ogg. Most of the
time, this would be multiplexed with audio/video to carry subtitles,
song lyrics (with or without karaoke data), etc, but doesn&#39;t have to be.
A possible use of a lone Kate stream would be an e-book. Moreover, the
motion feature gives Kate a powerful means to describe arbitrary curves,
so hand drawing of shapes can be achieved.
</p><p>
This was originally meant for karaoke use, but can be used for any
purpose. Motions can be attached to various semantics, like position,
color, etc, so scrolling or fading text can be defined.
</p>
-Des:
##----------------------------------------
=Pkg: liblouis 1.7.0 1.2.42 src
=Sum: Braille Translator and Back-Translator
+Des:
<!-- DT:Rich -->
<p>Liblouis is an open-source braille translator and back-translator.
It features support for computer and literary braille, supports
contracted and uncontracted translation for many, many languages
and has support for hyphenation. New languages can easily be added
through tables that support a rule- or dictionary based approach.
</p><p>
Liblouis also supports math braille (Nemeth and Marburg). The
formatting of braille is provided by the companion project
liblouisxml.
</p><p>
Liblouis is based on the translation routines in the BRLTTY
screenreader for Linux. It has, however, gone far beyond these
routines. It is named in honor of Louis Braille.
</p><p>
Included are also tools for testing and debugging tables.
</p>
-Des:
##----------------------------------------
=Pkg: libmodplug 0.8.8.4 2.5.17 src
=Sum: MOD-Playing Sound Library
+Des:
<!-- DT:Rich -->
<p>Modplug library based on the ModPlug sound engine.
<ul>
<li>Plays 22 different mod formats.

</li><li>Plays zip, rar, gzip, and bzip2 compressed mods.

</li><li>plays timidity&#39;s GUS patch files (*.pat).

</li><li>plays all types of MIDI files (*.mid).

</li><li>plays textfiles written in the ABC music notation (*.abc).
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libmpcdec 1.2.6 4.22 src
=Sum: Musepack Audio Decoder
+Des:
<!-- DT:Rich -->
<p>Musepack is an audio compression format with a strong emphasis on high quality. It is not lossless, but it is designed for transparency, so that you cannot hear differences between the original WAV file and the much smaller MPC file.
</p><p>
It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code.
</p><p>
Musepack is not particularly optimized for low bit rates. The encoder was designed to be transparent at the --standard setting, thus little low bit rate tuning has gone into the codec, unlike that of AAC, Vorbis, WMA, and others that focus more on this region.
</p>
-Des:
##----------------------------------------
=Pkg: libmsn 3.9.97 1.3.1 src
=Sum: Reusable, open-source library for MSN Messenger
+Des:
<!-- DT:Rich -->
<p>Libmsn is a reusable, open-source, fully documented library for connecting to Microsoft&#39;s MSN Messenger service.
</p>
-Des:
##----------------------------------------
=Pkg: libmspack 0.0.20060920alpha 66.8 src
=Sum: Library That Implements Different Microsoft Compressions
+Des:
<!-- DT:Rich -->
<p>Účelem libmspack je poskytnout kompresi i dekompresi některých ztrátových formátů používaných společností Microsoft. V současnosti jsou podporovány nejobvyklejší formáty.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp 0.3.4 2.19 src
=Sum: Commandline utilities for access to MTP Players
+Des:
<!-- DT:Rich -->
<p>This package contains binaries and documentation that allow accessto USB based media players based on the MTP (Media TransferProtocol) authored by Microsoft.
</p><p>
Common devices using this technology are Creative Zen, iRiver, Samsung and others.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz 2.1.5 5.18 src
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable audio CD, MP3 and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libnice 0.0.9 1.1.181 src
=Sum: Interactive Connectivity Establishment implementation
+Des:
<!-- DT:Rich -->
<p>libnice is an implementation of the IETF&#39;s draft Interactive Connectivity Establishment standard (ICE).
</p>
-Des:
##----------------------------------------
=Pkg: libnl 1.1 49.22.4.1 src
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libofa 0.9.3 73.18 src
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libogg 1.1.3 87.12 src
=Sum: Ogg datový tok (Bitstream) - knihovna
+Des:
<!-- DT:Rich -->
<p>Libogg is a library for manipulating ogg bitstreams.  It handles
both making ogg bitstreams and getting packets from ogg bitstreams.
</p><p>
Ogg is the native bitstream format of the <a href="pkg://libvorbis"> Ogg Vorbis audio codec </a>
and the <a href="pkg://libtheora"> Theora video codec</a>
</p>
-Des:
##----------------------------------------
=Pkg: libopenraw 0.0.5 6.28 src
=Sum: A library to decode digtal camera RAW files
+Des:
<!-- DT:Rich -->
<p>libopenraw is a library that aim at decoding digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: libotr 3.2.0 1.16 src
=Sum: "Off The Record" messaging library toolkit
+Des:
<!-- DT:Rich -->
<p>Off-the-Record (OTR) Messaging allows you to have private conversations
over instant messaging by providing:
Encryption
No one else can read your instant messages.
Authentication
You are assured the correspondent is who you think it is.
Deniability
The messages you send do not have digital signatures that are checkable
by a third party. Anyone can forge messages after a conversation to make
them look like they came from you. However, during a conversation, your
correspondent is assured the messages he sees are authentic and
unmodified.
Perfect forward secrecy
If you lose control of your private keys, no previous conversation is
compromised.
</p>
-Des:
##----------------------------------------
=Pkg: libp11 0.2.4 3.14 src
=Sum: Library Implementing a Small Layer on Top of PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>Libp11 is a library implementing a small layer on top of PKCS#11 API to make using PKCS#11 implementations easier.
</p><p>
The official name for PKCS#11 is &quot;RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p><p>
Libp11 source code includes the official header files (version 2.20) and thus is &quot;derived from the RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap 0.9.8 50.6.2 src
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>Libpcap je knihovna používaná programy pro zachycování paketů. Poskytuje
jim rozhraní pro zachycování a analýzu paketů ze síťových zařízení.
Balíček je potřeba pouze pro překlad programů, které zpracovávají síťový
provoz nebo pro vytváření vlastních programů s touto funkcí.
</p>
-Des:
##----------------------------------------
=Pkg: libplist 1.3 8.4.4.9 src
=Sum: Library for handling Apple Binary and XML Property Lists
+Des:
<!-- DT:Rich -->
<p>libplist is a library for handling Apple Binary and XML Property Lists.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy 0.3.1 1.1.42 src
=Sum: libproxy is a library that provides automatic proxy configuration management
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libproxy-plugins 0.3.1 1.1.111 src
=Sum: libproxy is a library that provides automatic proxy configuration management
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libpst 0.6.44 1.1.43 src
=Sum: A library for reading PST files
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-plugins 4.6.3 5.10.1 src
=Sum: Qt 4 SQL-Related Libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries that are used for connection with an SQL server.
You need a plug-in package for a supported SQL server as well.
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod 0.4.2 4.25 src
=Sum: A Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-group1 3.4.2.6 0.14.3 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p></p><p>
Openoffice.org is a comprehensive office package featuring a word
processor, a spreadsheet, a presentation program, and much more. This
package provides only the basic framework. You have to install the
additional modules to get the required functionality, see packages:
<ul>
<li>LibreOffice-base

</li><li>LibreOffice-calc

</li><li>LibreOffice-draw

</li><li>LibreOffice-impress

</li><li>LibreOffice-math

</li><li>LibreOffice-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>LibreOffice-mailmerge

</li><li>LibreOffice-filters

</li><li>LibreOffice-kde

</li><li>LibreOffice-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for
example:
<ul>
<li>LibreOffice-de

</li><li>LibreOffice-fr

</li><li>LibreOffice-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-group2 3.4.2.6 0.14.3 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p></p><p>
Openoffice.org is a comprehensive office package featuring a word
processor, a spreadsheet, a presentation program, and much more. This
package provides only the basic framework. You have to install the
additional modules to get the required functionality, see packages:
<ul>
<li>LibreOffice-base

</li><li>LibreOffice-calc

</li><li>LibreOffice-draw

</li><li>LibreOffice-impress

</li><li>LibreOffice-math

</li><li>LibreOffice-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>LibreOffice-mailmerge

</li><li>LibreOffice-filters

</li><li>LibreOffice-kde

</li><li>LibreOffice-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for
example:
<ul>
<li>LibreOffice-de

</li><li>LibreOffice-fr

</li><li>LibreOffice-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-group3 3.4.2.6 0.14.3 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p></p><p>
Openoffice.org is a comprehensive office package featuring a word
processor, a spreadsheet, a presentation program, and much more. This
package provides only the basic framework. You have to install the
additional modules to get the required functionality, see packages:
<ul>
<li>LibreOffice-base

</li><li>LibreOffice-calc

</li><li>LibreOffice-draw

</li><li>LibreOffice-impress

</li><li>LibreOffice-math

</li><li>LibreOffice-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>LibreOffice-mailmerge

</li><li>LibreOffice-filters

</li><li>LibreOffice-kde

</li><li>LibreOffice-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for
example:
<ul>
<li>LibreOffice-de

</li><li>LibreOffice-fr

</li><li>LibreOffice-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-group4 3.4.2.6 0.14.3 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p></p><p>
Openoffice.org is a comprehensive office package featuring a word
processor, a spreadsheet, a presentation program, and much more. This
package provides only the basic framework. You have to install the
additional modules to get the required functionality, see packages:
<ul>
<li>LibreOffice-base

</li><li>LibreOffice-calc

</li><li>LibreOffice-draw

</li><li>LibreOffice-impress

</li><li>LibreOffice-math

</li><li>LibreOffice-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>LibreOffice-mailmerge

</li><li>LibreOffice-filters

</li><li>LibreOffice-kde

</li><li>LibreOffice-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for
example:
<ul>
<li>LibreOffice-de

</li><li>LibreOffice-fr

</li><li>LibreOffice-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-help-group5 3.4.2.6 0.14.2 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p></p><p>
Openoffice.org is a comprehensive office package featuring a word
processor, a spreadsheet, a presentation program, and much more. This
package provides only the basic framework. You have to install the
additional modules to get the required functionality, see packages:
<ul>
<li>LibreOffice-base

</li><li>LibreOffice-calc

</li><li>LibreOffice-draw

</li><li>LibreOffice-impress

</li><li>LibreOffice-math

</li><li>LibreOffice-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>LibreOffice-mailmerge

</li><li>LibreOffice-filters

</li><li>LibreOffice-kde

</li><li>LibreOffice-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for
example:
<ul>
<li>LibreOffice-de

</li><li>LibreOffice-fr

</li><li>LibreOffice-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libreoffice-l10n 3.4.2.6 0.7.9 src
=Sum: A Source Package for LibreOffice Localizations
+Des:
<!-- DT:Rich -->
<p></p><p>
This source package is used to build the LibreOffice artwork
development package.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-templates-labels 1.0.1 1.4.1 src
=Sum: Label Templates for LibreOffice
+Des:
<!-- DT:Rich -->
<p></p><p>
This source package includes a collection of label templates for
LibreOffice.
</p>
-Des:
##----------------------------------------
=Pkg: libreoffice-thesaurus 20070719.1 0.4.1 src
=Sum: A Source Package for LibreOffice Thesaurus Dictionaries
+Des:
<!-- DT:Rich -->
<p></p><p>
This source package is used to build LibreOffice thesaurus
dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: libsatsolver 0.17.4 0.5.12 src
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: libselinux 2.0.91 4.2.1 src
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: libsepol 2.0.41 2.2.9 src
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libshout 2.2.2 116.32 src
=Sum: Knihovna pro komunikaci s icecast serverem
+Des:
<!-- DT:Rich -->
<p>Libshout is a library for communicating with and sending data to an icecast server.  It handles the socket connection, the timing of the data, and prevents bad data from getting to the icecast server.
</p>
-Des:
##----------------------------------------
=Pkg: libslab 2.27.91 6.15.2 src
=Sum: Library to create tile-based UI for GNOME
+Des:
<!-- DT:Rich -->
<p>This library makes it easy to create tile-based UI for GNOME, as seen in
gnome-main-menu.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios 2.0.2 11.8.4 src
=Sum: Open BIOS parsing libs
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup 2.32.2 4.7.1 src
=Sum: Simple Object Access Protocol (SOAP)
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C.
</p><p>
It provides a queued asynchronous callback-based mechanism for sending and
servicing SOAP requests and a WSDL (Web Service Definition Language) to C
compiler that generates client stubs and server skeletons for easily calling
and implementing SOAP methods.
</p><p>
It uses the Glib main loop and is designed to work well with GTK+
applications.  This enables GNOME applications to access SOAP servers
on the network in a completely asynchronous fashion, very similar to the
GTK+ programming model (a synchronous operation mode is also supported
for those who want it).
</p><p>
The WSDL compiler helps you make your applications interoperate
with services that expose their descriptions through WSDL.
</p>
-Des:
##----------------------------------------
=Pkg: libspectre 0.2.1 2.24 src
=Sum: Library for Rendering PostScript Documents
+Des:
<!-- DT:Rich -->
<p>libspectre is a small library for rendering Postscript documents. It provides a convenient easy to use API for handling and rendering Postscript documents.
</p>
-Des:
##----------------------------------------
=Pkg: libssh 0.2 5.16.1 src
=Sum: SSH library
+Des:
<!-- DT:Rich -->
<p>The ssh library was designed to be used by programmers needing a working SSH
implementation by the mean of a library. The complete control of the client is
made by the programmer. With libssh, you can remotely execute programs,
transfer files, use a secure and transparent tunnel for your remote programs.
With its Secure FTP implementation, you can play with remote files easily,
without third-party programs others than libcrypto (from openssl).
</p><p>
This package provides libssh from http://0xbadc0de.be/ that should not be
confused with libssh2 available from http://www.libssh2.org (libssh2 package)
</p>
-Des:
##----------------------------------------
=Pkg: libssh2_org 0.19.0+20080814 2.16.1 src
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libtheora 1.1.1 15.5.32 src
=Sum: Volně dostupný video kodek
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtimidity 0.1.0 6.5.17 src
=Sum: MIDI to WAVE converter library
+Des:
<!-- DT:Rich -->
<p>This library is based on the TiMidity decoder from SDL_sound library.
Purpose to create this library is to avoid unnecessary dependences.
SDL_sound requires SDL and some other libraries, that not needed to
process MIDI files. In addition libtimidity provides more suitable
API to work with MIDI songs, it enables to specify full path to the
timidity configuration file, and have function to retrieve meta data
from MIDI song.
</p>
-Des:
##----------------------------------------
=Pkg: libtirpc 0.2.1 1.5.1 src
=Sum: Transport Independent RPC Library
+Des:
<!-- DT:Rich -->
<p>The Transport Independent RPC library (TI-RPC) is a replacement for
the standard SunRPC library in glibc which does not support IPv6
addresses. This implementation allows the support of other transports
than UDP and TCP over IPv4
</p>
-Des:
##----------------------------------------
=Pkg: libtool 2.2.6 2.131.1 src
=Sum: Nástroj pro vytváření sdílených knihoven
+Des:
<!-- DT:Rich -->
<p>GNU libtool is a set of shell scripts to automatically configure UNIX architectures to build shared libraries in a generic fashion.
</p>
-Des:
##----------------------------------------
=Pkg: libunique 1.1.2 1.1.279 src
=Sum: A library for writing single instance application
+Des:
<!-- DT:Rich -->
<p>Unique is a library for writing single instance application. If you launch a single instance application twice, the second instance will either just quit or will send a message to the running instance.
</p>
-Des:
##----------------------------------------
=Pkg: libusb 0.1.12 139.1.1 src
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0 1.0.8 8.4.2.1 src
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb je knihovna umožňující uživatelům přístup k USB zařízením.
</p>
-Des:
##----------------------------------------
=Pkg: libvdpau 0.4.1 16.16.26 src
=Sum: VDPAU wrapper and trace libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the libvdpau wrapper library and the libvdpau_trace
debugging library, along with the header files needed to build VDPAU
applications.  To actually use a VDPAU device, you need a vendor-specific
implementation library.  Currently, this is always libvdpau_nvidia.  You can
override the driver name by setting the VDPAU_DRIVER environment variable.
</p>
-Des:
##----------------------------------------
=Pkg: libvoikko 2.0 2.26 src
=Sum: Spellchecker and Hyphenator for Finnish Language
+Des:
<!-- DT:Rich -->
<p>Voikko is a Finnish spellchecker and hyphenator based on Malaga and Suomi-Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: libvpx 0.9.7 3.5.17 src
=Sum: VP8 codec library
+Des:
<!-- DT:Rich -->
<p>WebM is an open, royalty-free, media file format designed for the web.
</p><p>
WebM defines the file container structure, video and audio formats.
WebM files consist of video streams compressed with the VP8 video codec
and audio streams compressed with the Vorbis audio codec.
The WebM file structure is based on the Matroska container.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit 1.2.7 0.13.1 src
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit1_0 1.0.1 0.1.141 src
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd 0.8.14 4.33 src
=Sum: Library for Importing WordPerfect (tm) Documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading or interpreting data from WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (for example, a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg 0.1.3 3.33 src
=Sum: Library to read and parse graphics in WordPerfect Graphics format
+Des:
<!-- DT:Rich -->
<p>libwpg is a C++ library to read and parse graphics in WPG (WordPerfect Graphics) format. It is cross-platform, at the moment it can be build on Microsoft Windows and Linux.
</p>
-Des:
##----------------------------------------
=Pkg: libwps 0.1.2 5.33 src
=Sum: Library for importing the Microsoft Works word processor file format
+Des:
<!-- DT:Rich -->
<p>libwps is a library (for use by word procesors, for example) for importing the Microsoft Works word processor file format.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier 4.0 1.1.73 src
=Sum: Library with X keyboard related functions
+Des:
<!-- DT:Rich -->
<p>Tato knihovna zjednodušuje vývoj XKB aplikací.
</p>
-Des:
##----------------------------------------
=Pkg: libyajl 1.0.11 6.5.103 src
=Sum: Yet Another JSON Library
+Des:
<!-- DT:Rich -->
<p>YAJL is a small event-driven (SAX-style) JSON parser written in ANSI C, and a
small validating JSON generator.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp-bindings 0.5.3 1.5.165 src
=Sum: Bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: linux-atm 2.5.0 135.22 src
=Sum: Nástroje a knihovny pro ATM
+Des:
<!-- DT:Rich -->
<p>Nástroje a knihovny pro podporu ATM (Asynchronous Transfer Mode) sítě.
</p>
-Des:
##----------------------------------------
=Pkg: log4c 1.2.1 10.34 src
=Sum: A library of C for flexible logging to files, syslog and other destinations
+Des:
<!-- DT:Rich -->
<p>Log4c is a library of C for flexible logging to files, syslog and other
destinations. It is modeled after the Log for Java library
(http://jakarta.apache.org/log4j/), staying as close to their API as is
reasonable.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth 1.4.2 3.20 src
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It is designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: lpsolve 5.5.0.13 2.22 src
=Sum: A Mixed Integer Linear Programming (MILP) Solver
+Des:
<!-- DT:Rich -->
<p>Mixed Integer Linear Programming (MILP) solver lpsolve solves pure linear, (mixed) integer/binary, semi-continuous and special ordered sets (SOS) models.
</p>
-Des:
##----------------------------------------
=Pkg: lzo 2.03 3.18 src
=Sum: Realtimová kompresní knihovna
+Des:
<!-- DT:Rich -->
<p>LZO je přenositelná bezztrátová kompresní knihovna napsaná v ANSI C. Umožňuje skutečně rychlou kompresi a velmi rychlou dekompresi, která nemá nároky na paměť.
LZO je využívání pro kompresi a dekompresi v reálném čase.
</p>
-Des:
##----------------------------------------
=Pkg: malaga 7.12 2.18.2 src
=Sum: A Grammar Development Environment for Natural Languages
+Des:
<!-- DT:Rich -->
<p>Malaga is a software package for the development and application of grammars that are used for the analysis of words and sentences
of natural languages. It contains a programming language for the
modelling of morphology and syntax grammars.
</p><p>
Malaga is based on the grammatical theory of the &quot;Left Associative Grammar&quot;
(LAG), developed by Roland Hausser, professor for Computational Linguistics at
University of Erlangen, Germany.
</p>
-Des:
##----------------------------------------
=Pkg: moonlight 2.4.1 0.5.1 src
=Sum: Novell Moonlight
+Des:
<!-- DT:Rich -->
<p>Moonlight is an open source implementation of Microsoft Silverlight for Unix systems.
</p>
-Des:
##----------------------------------------
=Pkg: mpfr 2.3.2 3.115 src
=Sum: The MPFR multiple-precision floating-point library
+Des:
<!-- DT:Rich -->
<p>The MPFR library is a C library for multiple-precision floating-point computations with exact rounding (also called correct rounding). It is based on the GMP multiple-precision library.
</p><p>
The main goal of MPFR is to provide a library for multiple-precision floating-point computation which is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa).
</p>
-Des:
##----------------------------------------
=Pkg: myspell-dictionaries 20040830 8.21.1 src
=Sum: Zdrojový balíček pro slovníky používané v MySpell
+Des:
<!-- DT:Rich -->
<p>Zdrojový balíček slovníků pro MySpell.
</p><p>
Slovník je používán při kontrole pravopisu v OpenOffice.org
a Mozille.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses 5.6 90.55 src
=Sum: Nová knihovna curses
+Des:
<!-- DT:Rich -->
<p>Pokud textová aplikace potřebuje přímo řídit výstup na obrazovku (např.
chce umístit kurzor na pozici x, y a pak vypsat text), používá se
knihovna ncurses. V balíčku je obsažena i podpora panelů a formulářů.
Nová verze knihovny curses podporuje barvy, speciální znaky a panely.
</p>
-Des:
##----------------------------------------
=Pkg: neon 0.29.6 6.7.1 src
=Sum: Klientská knihovna pro HTTP a WebDAV
+Des:
<!-- DT:Rich -->
<p>neon je knihovna s céčkovým rozhraním. Mezi hlavní funkce patří:
neon je knihovna s céčkovým rozhraním. Mezi hlavní funkce patří:<ul>
<li>Vysokoúrovňové rozhraní pro HTTP a WebDAV metody (PUT, GET, HEAD atd.)
</li><li>Nízkoúrovňové rozhraní pro zpracování HTTP dotazů - pro jednoduchou implementaci nových metod
</li><li>HTTP/1.1 a HTTP/1.0 spojení
</li><li>RFC2617 basic a digest autentikace (včetně auth-int, md5-sess)
</li><li>Podpora proxy (včetně autentikace)
</li><li>Obecný WebDAV 207 XML mechanismus pro zpracování odpovědí
</li><li>XML parsery expat nebo libxml
</li><li>Jednoduché generování chybových hlášení z 207
</li><li>WebDAV manipulace se zdroji: MOVE, COPY, DELETE, MKCOL.
</li><li>WebDAV podpora metadat: nastavuje a odstraňuje vlastnosti
(PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: netcontrol 0.2.4 0.7.6 src
=Sum: A network configuration library
+Des:
<!-- DT:Rich -->
<p>A interim network configuration library, currently implementing
the libnetcf interface for libvirt.
</p>
-Des:
##----------------------------------------
=Pkg: nfs-utils 1.2.3 18.17.2 src
=Sum: Podpůrné programy pro nfsd realizovaný v jádře
+Des:
<!-- DT:Rich -->
<p>Tento balíček obsahuje NFS nástroje. Můžete nastavit používání vláken pomocí proměnné USE_KERNEL_NFSD_NUMBER v sysconfig.
Pro používání kvót na NFS svazcích nainstalujte balíček quota.
</p>
-Des:
##----------------------------------------
=Pkg: novfs-kmp 1 0.17.15 src
=Sum: novfs kmp
+Des:
<!-- DT:Rich -->
<p>This package contains novfs ko
</p><p>
The Novell Client on Linux uses a Virtual File System provided by the base operating system itself which is a kernel loadable module (novfs.ko) that loads in Linux kernel and a daemon (novfsd) that runs in the user space. Both components must be running on the workstation for the client to connect to the network.
</p>
-Des:
##----------------------------------------
=Pkg: nss-shared-helper 1.0.6 1.6 src
=Sum: Helper functions for sharing NSS database
+Des:
<!-- DT:Rich -->
<p>This library provides helper functions for programs that want to share
an NSS crypto database.
</p>
-Des:
##----------------------------------------
=Pkg: opencdk 0.6.6 2.16 src
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: openclipart 0.18 136.22 src
=Sum: Open Clip Art Library
+Des:
<!-- DT:Rich -->
<p>An extensive set of clip art graphics that can be used for free.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif 2.3.1 3.13 src
=Sum: Open Motif
+Des:
<!-- DT:Rich -->
<p>Běhové prostředí Open Motif. Obsahuje sdílené knihovny pro Motif.
Open Motif je volně dostupná verze dobře známého uživatelského
rozhraní a toolkitu Motif pro Open Source operační systémy. Tento
balíček byl vytvořen ze zdrojových textů od firmy Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openwsman 2.2.3 0.6.5 src
=Sum: Opensource Implementation of WS-Management
+Des:
<!-- DT:Rich -->
<p>Opensource Implementation of WS-Management
</p>
-Des:
##----------------------------------------
=Pkg: orc 0.4.11 7.5.23 src
=Sum: The Oil Runtime Compiler
+Des:
<!-- DT:Rich -->
<p>Orc is a library and set of tools for compiling and executing very simple
programs that operate on arrays of data.  The language is a generic
assembly language that represents many of the features available in SIMD
architectures, including saturated addition and subtraction, and many
arithmetic operations.
</p>
-Des:
##----------------------------------------
=Pkg: pangomm 2.26.0 1.1.358 src
=Sum: C++ interface for pango
+Des:
<!-- DT:Rich -->
<p>pangomm provides a C++ interface to the pango library.
</p>
-Des:
##----------------------------------------
=Pkg: pixman 0.16.0 1.2.22 src
=Sum: Pixel manipulation library
+Del:
<!-- DT:Rich -->
<p>Tento balíček je nezbytný pro provozování X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: polkit-qt 0.9.2 3.1.92 src
=Sum: PolicyKit Library Qt Bindings
+Des:
<!-- DT:Rich -->
<p>Polkit-qt aims to make it easy for Qt developers to take advantage of PolicyKit API. It is a convenience wrapper around QAction and QAbstractButton that lets you integrate those two components easily with PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: poppler 0.12.3 1.3.1 src
=Sum: PDF Rendering Library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: qscintilla 2.3.2 1.24 src
=Sum: C++ knihovna tříd
+Des:
<!-- DT:Rich -->
<p>QScintilla je Qt port Scintilla C++ editoru tříd Neil Hodgsona.
</p><p>
Jde o port původní Scintilla třídy (http://www.scintilla.org/).
</p><p>
Tento balíček je používán pouze programem eric, IDE pro Python.
</p>
-Des:
##----------------------------------------
=Pkg: rasqal 0.9.16 1.21 src
=Sum: Rasqal RDF Parser Toolkit for Redland
+Des:
<!-- DT:Rich -->
<p>Rasqal is a library providing full support for querying Resource
Description Framework (RDF) including parsing query syntaxes, constructing
the queries, executing them and returning result formats.  It currently
handles the RDF Data Query Language (RDQL) and SPARQL Query language.
</p>
-Des:
##----------------------------------------
=Pkg: redland 1.0.8 1.21 src
=Sum: a set of free software libraries that provide support for the Resource Description Framework (RDF)
+Des:
<!-- DT:Rich -->
<p>Redland is a library that provides a high-level interface for RDF
(Resource Description Framework) implemented in an object-based API.
It is modular and supports different RDF parsers, serializers,
storage and query languages.  Redland is designed for developers to
provide RDF support in their applications as well as a core library
for RDF developers to start with.
</p>
-Des:
##----------------------------------------
=Pkg: satsolver-bindings 0.42.0 6.7.31 src
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpiutil 1.0.1 2.15 src
=Sum: utility library for cmpi development
+Des:
<!-- DT:Rich -->
<p>A set of utility functions that make cmpi provider development easier
</p>
-Des:
##----------------------------------------
=Pkg: sblim-tools-libra 0.5.5 4.22 src
=Sum: SBLIM Common Resource Access Library for WBEM-SMT tasks
+Des:
<!-- DT:Rich -->
<p>The tools-libra package provides common functionality required by
the task-specific resource access layers of wbem-smt tasks such as
cmpi-dns and cmpi-samba.
</p>
-Des:
##----------------------------------------
=Pkg: schroedinger 1.0.10 8.5.14 src
=Sum: Library for decoding and encoding video in the Dirac format
+Des:
<!-- DT:Rich -->
<p>The Schroedinger project implements portable libraries for the high quality
Dirac video codec created by BBC Research and Development. Dirac is a free
and open source codec producing very high image quality video. The project
produces two libraries in ANSI C89, one for decoding and one for encoding.
</p>
-Des:
##----------------------------------------
=Pkg: sles-manuals_en 11.2 0.41.1 src
=Sum: SLES Documentation (English)
+Des:
<!-- DT:Rich -->
<p>The SUSE Linux Enterprise Server (SLES) Documentation consists of several manuals such as Administration, Deployment, Storage, etc.
</p>
-Des:
##----------------------------------------
=Pkg: speex 1.1.99.91 2.12 src
=Sum: Svobodný bezpatentový hlasový kodek
+Des:
<!-- DT:Rich -->
<p>Speex je nepatentovaný zvukový kodek navržený speciálně pro hlasový
vstup (narozdíl od Vorbis, který je obecný) a nabízí dobrou kvalitu pro
úzkopásmové a širokopásmové signály.
Projekt má za cíl stát se doplňkem pro Vorbis.
</p>
-Des:
##----------------------------------------
=Pkg: syslogd 1.4.1 708.37.1 src
=Sum: Systémový záznam (syslog)
+Des:
<!-- DT:Rich -->
<p>syslogd je démon obecný systémový démon pro zaznamenávání
událostí v systému a zpracovává požadavky na služby syslog. 
</p><p>
Tato verze syslogd je podobná standardní verzi Berkeley,
ale obsahuje mnoho kompatibilních rozšíření.
</p>
-Des:
##----------------------------------------
=Pkg: taglib-extras 0.1.6 2.1.101 src
=Sum: Extra plugins for TagLib
+Des:
<!-- DT:Rich -->
<p>Unofficial TagLib file type plugins maintained by the Amarok project
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-farsight 0.0.11 1.1.155 src
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Telepathy Farsight is a Telepathy client that uses Farsight2 and GStreamer to handle media streaming channels. It&#39;s used as a background process by other Telepathy clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-glib 0.8.0 1.1.67 src
=Sum: Libraries for adding telepathy support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
telepathy functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: thinkeramik 3.2.1 228.28 src
=Sum: Styl Thin Keramik pro KDE
+Des:
<!-- DT:Rich -->
<p>Jednoduše vypadající modifikace stylu Keramik.
</p>
-Des:
##----------------------------------------
=Pkg: tidy 1.0 34.7 src
=Sum: Program pro opravy a přeformátovávání HTML/XHTML/XML souborů
+Des:
<!-- DT:Rich -->
<p>Při editování HTML souborů je snadné udělat chybu. Nebylo by pěkné,
kdyby existoval jednoduchý způsob jak opravit tyto chyby automaticky
a upravit vadné editování na bezchybně zformátovaný dokument? Nyní
to je možné! Dave Raggett vytvořil volný program HTML TIDY, které
plní tuto funkci. Program také skvěle opravuje odporně nečitelné
HTML soubory generované specializovanými HTML editory a konverzními
nástroji, a může vám pomoci zjistit, kde si máte dát pozor, aby vaše
stránky byly čitelnější pro zdravotně postižené lidi.
</p><p>
</p><p>
Tidy je schopen opravovat velké množství chyb a tak vám umožňuje se
soustředit na jiné důležité věci. Každá nalezená položka je vypsána
s číslem řádku a pozicí, takže se můžete podívat, do dokumentu na místo,
kde se chyba objevila. Tidy negeneruje opravenou verzi dokumentu, pokud
nalezne chyby, o kterých neví, jak je opravit. Příslušná místa jsou
označena jako &quot;chyba&quot; (error) a ne jako &quot;varování&quot; (warning).
</p><p>
</p><p>
Program tidy byl popsán v článku o XHTML na webreview.com.
</p>
-Des:
##----------------------------------------
=Pkg: tiff 3.8.2 141.142.1 src
=Sum: Nástroje pro konverzi z nebo do formátu tiff
+Des:
<!-- DT:Rich -->
<p>Knihovna a podpůrné programy pro grafický formát TIFF.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-cmex 0.20061030 2.9 src
=Sum: Traditional Chinese TrueType fonts made by CMEX
+Des:
<!-- DT:Rich -->
<p>Traditional Chinese TrueType fonts made by CMEX.
</p>
-Des:
##----------------------------------------
=Pkg: ttf-founder 0.20040419 1.17 src
=Sum: Čínská TrueType písma od Beijing Founder Electronics
+Des:
<!-- DT:Rich -->
<p>Čínská TrueType písma od Beijing Founder Electronics
</p>
-Des:
##----------------------------------------
=Pkg: wavpack 4.50.1 1.22 src
=Sum: Free Hybrid Lossless Audio Compression Format
+Des:
<!-- DT:Rich -->
<p>WavPack is a completely open audio compression format providing lossless,
high-quality lossy, and unique hybrid compression modes. Although the
technology is loosely based on previous versions of WavPack, the new
version 4 format has been designed from the ground up to offer unparalleled
performance and functionality.
</p><p>
By default, lossless mode WavPack acts just like a WinZip compressor for
audio files. However, unlike MP3 or WMA encoding which can affect the sound
quality, not a single bit of the original information is lost, so there is no
chance of degradation. This makes lossless mode ideal for archiving audio
material or any other situation where quality is paramount. The compression
ratio depends on the source material, but generally is between 30% and 70%.
</p><p>
The hybrid mode provides all the advantages of lossless compression with an
additional bonus. Instead of creating a single file, this mode creates both, a
relatively small, high-quality lossy file that can be used all by itself, and a
&quot;correction&quot; file that (when combined with the lossy file) provides full
lossless restoration. For some users this means never having to choose between
lossless and lossy compression!
</p>
-Des:
##----------------------------------------
=Pkg: wbxml2 0.9.2_SVN59 11.18 src
=Sum: WBXML parser and compiler library
+Des:
<!-- DT:Rich -->
<p>wbxml2 je knihovna obsahující WBXML parser a WBXML kompilátor.
Nezávisí však na libxml2, ale na expat, což ji dělá rychlejší a přenositelnější.
WBXML knihovna obsahuje knihovnu a s ní spojené nástroje pro kontrolu,
dekódování a práci s WBXML dokumenty. WBXML (Wireless Binary XML)
formát je binární reprezentací XML definovanou Wap fórem.
</p>
-Des:
##----------------------------------------
=Pkg: xawtv 3.95 179.19 src
=Sum: Televizní program pro Video4Linux (Athena)
+Des:
<!-- DT:Rich -->
<p>Xawtv je program pro sledování televize na vašem Linuxu.
Podporuje zařízení video4linux (například karty bttv,
různé webové kamery připojené přes USB a další). 
Používá Athena widgety.
</p>
-Des:
##----------------------------------------
=Pkg: xine-lib 1.1.15 23.3.9 src
=Sum: Video přehrávač s moduly
+Des:
<!-- DT:Rich -->
<p>xine is a free multimedia player. It plays back CDs, DVDs, and VCDs. It also decodes multimedia files like AVI, MOV, WMV, and MP3 from local disk drives, and displays multimedia streamed over the Internet. It interprets many of the most common multimedia formats available - and some of the most uncommon formats, too.
</p><p>
The libxine1 package may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/xine#Legal_Matters
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-server 2.17.7 1.1.2 src
=Sum: YaST2 - Konfigurace NFS serveru
+Des:
<!-- DT:Rich -->
<p>Komponenta YaST2 pro konfiguraci NFS serveru (network file system),
který umožňuje vzdáleným počítačům přístup k lokálním souborům.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-theme 2.17.27 0.18.9 src
=Sum: YaST2 - Téma
+Des:
<!-- DT:Rich -->
<p>Obsahuje různá SUSE témata pro YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: zypp-plugin 0.3 2.5.38 src
=Sum: Helper that makes writing ZYpp plugins in python easier
+Des:
<!-- DT:Rich -->
<p>This API allows writing ZYpp plugins by just subclassing from a python class
and implementing the commands you want to respond to as python methods.
</p>
-Des:
