=Ver: 2.0
##----------------------------------------
=Pkg: CASA_auth_token_svc 1.7.1587 1.43 noarch
=Sum: Novell CASA Authentication Token Service
+Des:
<!-- DT:Rich -->
<p>CASA_auth_token is an authentication token infrastructure with support for multiple authentication mechanisms with an emphasis on providing a scalable single sign-on solution.
</p><p>
A key feature of CASA_auth_token is that its authentication tokens contain identity information about the entity being authenticated. This information is made available to the consuming services. The amount of information contained in the tokens is configured on a per-service basis. Because of this feature, we say that CASA_auth_token projects an &quot;Authenticated Identity&quot;.
</p><p>
The CASA_auth_token_svc is the infrastructure component responsible for authenticating entities using the native authentication mechanism and for issuing tokens that can later be used by applications to authenticate the entity or services that are CASA authentication enabled.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-artwork-devel 3.2.0.9 0.2.27 noarch
=Sum: OpenOffice.org Artwork Development
+Des:
<!-- DT:Rich -->
<p>This package provides artwork used by the OpenOffice.org development.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-branding-SLED 3.0 20.22 noarch
=Sum: SLED Branding for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package includes the SLED branding for the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-branding-upstream 3.2.0.9 0.2.27 noarch
=Sum: Original Branding for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package includes the original branding for the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-ar 3.2.0.9 0.2.24 noarch
=Sum: Arabic Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Arabic help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-ar.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-cs 3.2.0.9 0.2.24 noarch
=Sum: Czech Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Czech help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-cs.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-da 3.2.0.9 0.2.24 noarch
=Sum: Danish Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Danish help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-da.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-de 3.2.0.9 0.2.24 noarch
=Sum: German Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>German help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-de.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-en-GB 3.2.0.9 0.2.24 noarch
=Sum: British Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>British help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-en-GB.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-en-US 3.2.0.9 0.2.23 noarch
=Sum: American Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>American help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-en-US.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-en-US-devel 3.2.0.9 0.2.23 noarch
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-es 3.2.0.9 0.2.24 noarch
=Sum: Spanish Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Spanish help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-es.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-fr 3.2.0.9 0.2.24 noarch
=Sum: French Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>French help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-fr.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-hu 3.2.0.9 0.2.24 noarch
=Sum: Hungarian Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Hungarian help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-hu.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-it 3.2.0.9 0.2.24 noarch
=Sum: Italian Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Italian help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-it.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-ja 3.2.0.9 0.2.24 noarch
=Sum: Japanese Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Japanese help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-ja.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-nl 3.2.0.9 0.2.24 noarch
=Sum: Dutch Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Dutch help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-nl.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-pl 3.2.0.9 0.2.24 noarch
=Sum: Polish Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Polish help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-pl.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-pt 3.2.0.9 0.2.24 noarch
=Sum: Portuguese Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Portuguese help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-pt.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-pt-BR 3.2.0.9 0.2.24 noarch
=Sum: Brazilian Portuguese Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Brazilian Portuguese help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-pt-BR.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-ru 3.2.0.9 0.2.24 noarch
=Sum: Russian Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Russian help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-ru.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-sv 3.2.0.9 0.2.24 noarch
=Sum: Swedish Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Swedish help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-sv.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-zh-CN 3.2.0.9 0.2.24 noarch
=Sum: Chinese Simplified Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese simplified help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-zh-CN.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-zh-TW 3.2.0.9 0.2.24 noarch
=Sum: Chinese Traditional Help Localization for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese traditional help localization for OpenOffice.org. The other localized stuff is in OpenOffice.org-l10n-zh-TW.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-hyphen 20080929 2.18 noarch
=Sum: Hyphen Dictionaries for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>These dictionaries help you to hyphenate texts and words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-icon-themes 3.2.0.9 0.2.24 noarch
=Sum: Thème d'icone pour OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package provides various icon themes for the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-af 3.2.0.9 0.2.24 noarch
=Sum: African Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>African localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-ar 3.2.0.9 0.2.24 noarch
=Sum: Arabic Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Arabic localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-ar.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-ca 3.2.0.9 0.2.24 noarch
=Sum: Catalan Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Catalan localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-cs 3.2.0.9 0.2.24 noarch
=Sum: Czech Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Czech localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-cs.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-da 3.2.0.9 0.2.24 noarch
=Sum: Danish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Danish localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-da.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-de 3.2.0.9 0.2.24 noarch
=Sum: German Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>German localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-de.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-el 3.2.0.9 0.2.24 noarch
=Sum: Greek Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Greek localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-en-GB 3.2.0.9 0.2.24 noarch
=Sum: British Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>British localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-en-GB.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-es 3.2.0.9 0.2.24 noarch
=Sum: Spanish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Spanish localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-es.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-extras 3.2.0.9 0.2.24 noarch
=Sum: OpenOffice.org Extras
+Des:
<!-- DT:Rich -->
<p>This package provides the ususal OpenOffice.org extra stuff, for example autocorrection definitions, a letter wizard, a basic gallery.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-extras-devel 3.2.0.9 0.2.24 noarch
=Sum: OpenOffice.org Extras
+Des:
<!-- DT:Rich -->
<p>This package provides localizations of the basic stuff used by the OpenOffice.org development.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-fi 3.2.0.9 0.2.24 noarch
=Sum: Finnish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Finnish localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-fr 3.2.0.9 0.2.24 noarch
=Sum: French Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>French localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-fr.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-hu 3.2.0.9 0.2.24 noarch
=Sum: Hungarian Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Hungarian localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-hu.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-it 3.2.0.9 0.2.24 noarch
=Sum: Italian Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Italian localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-it.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-ja 3.2.0.9 0.2.24 noarch
=Sum: Japanese Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Japanese localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-ja.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-nb 3.2.0.9 0.2.24 noarch
=Sum: Norwegian Bokmaal Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Norwegian Bokmaal localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-nl 3.2.0.9 0.2.24 noarch
=Sum: Dutch Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Dutch localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-nl.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-nn 3.2.0.9 0.2.24 noarch
=Sum: Norwegian Nynorsk Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Norwegian Nynorsk localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-pl 3.2.0.9 0.2.24 noarch
=Sum: Polish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Polish localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-pl.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-pt 3.2.0.9 0.2.24 noarch
=Sum: Portuguese Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Portuguese localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-pt.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-pt-BR 3.2.0.9 0.2.24 noarch
=Sum: Brazilian Portuguese Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Brazilian Portuguese localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-pt-BR.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-ru 3.2.0.9 0.2.24 noarch
=Sum: Russian Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Russian localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-ru.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-sk 3.2.0.9 0.2.24 noarch
=Sum: Slovak Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Slovak localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-sv 3.2.0.9 0.2.24 noarch
=Sum: Swedish Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Swedish localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-sv.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-xh 3.2.0.9 0.2.24 noarch
=Sum: Xhosa Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Xhosa localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-zh-CN 3.2.0.9 0.2.24 noarch
=Sum: Chinese Simplified Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese simplified localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-zh-CN.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-zh-TW 3.2.0.9 0.2.24 noarch
=Sum: Chinese Traditional Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Chinese traditional localization files for OpenOffice.org. The localized help content is in the package OpenOffice.org-help-zh-TW.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n-zu 3.2.0.9 0.2.24 noarch
=Sum: Zulu Localization Files for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>Zulu localization files for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-openclipart 3 1.24.53.69 noarch
=Sum: Extra Galleries for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains an extensive set of extra galleries for OpenOffice.org. It can be used to enrich documents with graphics arts.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-de 3.0 1.22 noarch
=Sum: German Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>A compilation of German templates for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-en 3.0 1.22 noarch
=Sum: English Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>A collection of english templates for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-labels-a4 1.0 2.22 noarch
=Sum: A4 Size Label Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>A collection of A4 size label templates for OpenOffice.org. They are intended for Europe and Asia.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-labels-letter 1.0 2.22 noarch
=Sum: Letter Size Label Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>A collection of letter size label templates for OpenOffice.org. They are intended for US.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-presentation-layouts 3.0 1.21 noarch
=Sum: Presentation Layout Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains a collection of presentation layout templates for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-cs 20070913 3.18 noarch
=Sum: Czech Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Czech thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-de 20080406 3.18 noarch
=Sum: German Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The German thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-en 20060111 3.18 noarch
=Sum: English Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The English thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-es 20050720 3.18 noarch
=Sum: Spanish Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Spanish thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-fr 20060511 3.18 noarch
=Sum: French Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The French thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-hu 20080319 3.18 noarch
=Sum: Hungarian Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Hungarian thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-nb 20080310 3.18 noarch
=Sum: Norwegian Bokmaal Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Norwegian Bokmaal thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-pl 20061223 3.18 noarch
=Sum: Polish Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Polish thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-pt 20060817 3.18 noarch
=Sum: Portuguese Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Portuguese thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-ru 20061016 3.18 noarch
=Sum: Russian Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Russian thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-sk 20080926 3.18 noarch
=Sum: Slovak Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Slovak thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus-sv 20080609 3.18 noarch
=Sum: Swedish Thesaurus Dictionary for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Swedish thesaurus dictionary that can be used to look up for synonyms and related words in the OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: aelfred 1.2 177.27 noarch
=Sum: Java-based XML parser
+Des:
<!-- DT:Rich -->
<p>AElfred is a Java-based XML parser from Microstar Software Ltd.
AElfred is distributed for free (with full source)
for both commercial and non-commercial use.
</p>
-Des:
##----------------------------------------
=Pkg: aelfred-javadoc 1.2 177.27 noarch
=Sum: Java-based XML parser (documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc pour aelfred.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-firmware 1.0.17 1.21 noarch
=Sum: Firmware Data Files for ALSA
+Des:
<!-- DT:Rich -->
<p>Various firmware data files for ALSA drivers.
</p>
-Des:
##----------------------------------------
=Pkg: ant 1.7.0 200.15 noarch
=Sum: A Java-Based Build Tool
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool. In theory, it is kind of like Make, but without Make&#39;s wrinkles.
</p><p>
Why another build tool when there is already make, gnumake, nmake, jam, and
others? Because all those tools have limitations that Ant&#39;s original author
could not live with when developing software across multiple platforms.
Make-like tools are inherently shell-based--they evaluate a set of
dependencies then execute commands, not unlike what you would issue in a shell.
This means that you can easily extend these tools by using or writing any
program for the OS that you are working on. However, this also means that you
limit yourself to the OS, or at least the OS type, such as Unix, that you are
working on.
</p><p>
Makefiles are inherently evil as well. Anybody who has worked on them for any
time has run into the dreaded tab problem. &quot;Is my command not executing because
I have a space in front of my tab???&quot; said the original author of Ant way too
many times. Tools like Jam took care of this to a great degree, but still have
yet another format to use and remember.
</p><p>
Ant is different. Instead of a model where it is extended with shell-based
commands, Ant is extended using Java classes. Instead of writing shell
commands, the configuration files are XML-based, calling out a target tree
where various tasks are executed. Each task is run by an object that implements
a particular task interface.
</p><p>
Granted, this removes some of the expressive power that is inherent by being
able to construct a shell command such as `find . -name foo -exec rm {}`, but
it gives you the ability to be cross-platform--to work anywhere and
everywhere. If you really need to execute a shell command, Ant has an
&lt;exec&gt; task that allows different commands to be executed based on the OS used.
</p>
-Des:
##----------------------------------------
=Pkg: ant-antlr 1.7.0 200.22 noarch
=Sum: Optional antlr Tasks for Ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
This package contains optional antlr tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-bcel 1.7.0 200.22 noarch
=Sum: Optional apache bcel tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache bcel tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-bsf 1.7.0 200.22 noarch
=Sum: Optional apache bsf tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache bsf tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-log4j 1.7.0 200.22 noarch
=Sum: Optional apache log4j tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache log4j tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-oro 1.7.0 200.22 noarch
=Sum: Optional apache oro tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache oro tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-regexp 1.7.0 200.22 noarch
=Sum: Optional apache regexp tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache regexp tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-apache-resolver 1.7.0 200.22 noarch
=Sum: Optional apache resolver tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional apache resolver tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-commons-logging 1.7.0 200.22 noarch
=Sum: Optional commons logging tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional commons logging tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-contrib 1.0b2 39.23 noarch
=Sum: Collection of tasks for Ant
+Des:
<!-- DT:Rich -->
<p>The Ant-Contrib project is a collection of tasks
(and at one point maybe types and other tools)
for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-javadoc 1.7.0 200.15 noarch
=Sum: Javadoc for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains the javadoc documentation for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-javamail 1.7.0 200.22 noarch
=Sum: Optional javamail tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional javamail tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-jdepend 1.7.0 200.22 noarch
=Sum: Optional jdepend tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional jdepend tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-jmf 1.7.0 200.22 noarch
=Sum: Optional jmf tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional jmf tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-junit 1.7.0 200.22 noarch
=Sum: Optional junit tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional JUnit tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-manual 1.7.0 200.15 noarch
=Sum: Manual for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains the manual for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-nodeps 1.7.0 200.22 noarch
=Sum: Optional tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-scripts 1.7.0 200.15 noarch
=Sum: Additional scripts for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains additional perl and python scripts for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-swing 1.7.0 200.22 noarch
=Sum: Optional swing tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional swing tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ant-trax 1.7.0 200.22 noarch
=Sum: Optional trax tasks for ant
+Des:
<!-- DT:Rich -->
<p>Apache Ant is a Java-based build tool.
</p><p>
This package contains optional trax tasks for Apache Ant.
</p>
-Des:
##----------------------------------------
=Pkg: antlr 2.7.7 1.27 noarch
=Sum: Another Tool for Language Recognition
+Des:
<!-- DT:Rich -->
<p>ANTLR, Another Tool for Language Recognition, (formerly PCCTS) is a
language tool that provides a framework for constructing recognizers,
compilers, and translators from grammatical descriptions containing
C++ or Java actions (you can use PCCTS 1.xx to generate C-based
parsers).
</p>
-Des:
##----------------------------------------
=Pkg: apache-portlet-1_0-api 1.0 85.32 noarch
=Sum: Portlet API 1.0 from Jetspeed2
+Des:
<!-- DT:Rich -->
<p>Java Standard Portlet API accoring to JSR-168, from Jetspeed-2 .
</p>
-Des:
##----------------------------------------
=Pkg: apel 10.6 2.17 noarch
=Sum: Une bibliothèque Emacs portable
##----------------------------------------
=Pkg: apel-xemacs 10.6 351.19 noarch
=Sum: Une bibliothèque Emacs portable
+Des:
<!-- DT:Rich -->
<p>APEL signifie &quot;Une Bibliothèque Emacs Portable&quot; (A Portable Emacs Library)
</p>
-Des:
##----------------------------------------
=Pkg: asciidoc 8.2.7 29.21 noarch
=Sum: Text-Based Document Generation
+Des:
<!-- DT:Rich -->
<p>AsciiDoc is a text document format for writing short documents,
articles, books, and UNIX man pages. AsciiDoc files can be translated
to HTML and DocBook markups using the asciidoc command.
</p>
-Des:
##----------------------------------------
=Pkg: asm 1.5.3 20.18 noarch
=Sum: Java bytecode manipulation framework
+Des:
<!-- DT:Rich -->
<p>ASM is a Java bytecode manipulation framework.
</p><p>
It can be used to dynamically generate stub classes or other proxy classes, directly in binary form, or to dynamically modify classes at load time, i.e., just before they are loaded into the Java Virtual Machine.
</p><p>
ASM offers similar functionalities as BCEL or SERP, but is much smaller.
</p>
-Des:
##----------------------------------------
=Pkg: asm-javadoc 1.5.3 20.18 noarch
=Sum: Java bytecode manipulation framework (documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc pour asm.
</p>
-Des:
##----------------------------------------
=Pkg: autoconf213 2.13 2.3.3 noarch
=Sum: A GNU Tool for Automatically Configuring Source Code
+Des:
<!-- DT:Rich -->
<p>GNU Autoconf is a tool for configuring source code and makefiles. Using autoconf, programmers can create portable and configurable packages, because the person building the package is allowed to specify various configuration options.
</p><p>
You should install autoconf if you are developing software and would like to create shell scripts to configure your source code packages.
</p><p>
Note that the autoconf package is not required for the end user who may be configuring software with an autoconf-generated script; autoconf is only required for the generation of the scripts, not their use.
</p>
-Des:
##----------------------------------------
=Pkg: axis 1.4 236.34 noarch
=Sum: Apache implementation of the SOAP
+Des:
<!-- DT:Rich -->
<p>Apache Axis is an implementation of the SOAP (&quot;Simple Object Access Protocol&quot;) submission to W3C.
</p>
-Des:
##----------------------------------------
=Pkg: batik 1.7 117.32 noarch
=Sum: Boîte à outils Java pour visionner, générer ou manipuler des graphiques SVG.
+Des:
<!-- DT:Rich -->
<p>Batik est une boîte à outils écrite en Java pour les applications qui doivent manipuler des images au format SVG (Scalable Vector Graphics) : visualisation, création ou manipulation.
Batik fournit des blocs de construction que les développeurs peuvent assembler de différentes manières dans leur applications Java pour créer, analyser, visualiser ou convertir des contenus au format SVG. Batik, par exemple, contient des composants Swing qui permet la visualisation de contenu SVG. Il peut aussi être utilisé pour générer du SVG sur un client
ou un serveur, ou permettre la conversion de SVG vers d&#39;autres formats comme JPEG ou PNG. Le but de Batik est de faciliter la gestion de contenu SVG dans n&#39;importe quelle situation.
</p>
-Des:
##----------------------------------------
=Pkg: bcel 5.1 276.24 noarch
=Sum: Byte Code Engineering Library
+Des:
<!-- DT:Rich -->
<p>La bibliothèque Byte Code Engineering (BCEL) fournit un moyen pratique pour analyser, créer et manipuler des fichiers binaires Java (*.class). Les classes sont représentées par des objets qui contiennent toute l&#39;information de la classe comme les méthodes, des membres et des instructions en byte code.
De tels objets peuvent être lus depuis un fichier existant, ou transformé par un programme (comme un chargeur de classe, lors de l&#39;exécution) est sauvé de nouveau dans un fichier. Une utilisation encore plus intéressante est la création de classes dynamiquement à l&#39;exécution. BCEL peut aussi être utile dans le cadre de l&#39;apprentissage du fonctionnement de la machine virtuelle Java (JVM) et du format des fichiers Java.
</p><p>
BCEL a déjà été utilisée avec succès dans plusieurs projet comme des compilateurs, des optimiseurs, des obscurateurs de code et des outils d&#39;analyse.
</p><p>
Il contient un vérificateur de byte code nommé Justice, qui donne habituellement plus d&#39;information sur les erreurs qu&#39;avec votre codes et les messages données par la JVM.
</p>
-Des:
##----------------------------------------
=Pkg: bea-stax-api 1.2.0 5.24 noarch
=Sum: L'API StAX
+Des:
<!-- DT:Rich -->
<p>Streaming API for XML
</p>
-Des:
##----------------------------------------
=Pkg: blueprint-cursor-theme 0.0.2 128.8 noarch
=Sum: Curseurs pour le thème Blue Print
+Des:
<!-- DT:Rich -->
<p>Un thème pour le curseur de souris pour le système X Window.
</p>
-Des:
##----------------------------------------
=Pkg: boo 0.8.2.2960 1.31 noarch
=Sum: Un langage de scripting.
+Des:
<!-- DT:Rich -->
<p>Boo is a new object oriented statically typed programming language for the Common Language Infrastructure with a python inspired syntax and a special focus on language and compiler extensibility.
</p>
-Des:
##----------------------------------------
=Pkg: boo-devel 0.8.2.2960 1.31 noarch
=Sum: Un langage de scripting.
+Des:
<!-- DT:Rich -->
<p>Boo est un nouveau langage de programmation orienté objet avec typage statique pour le Common Language Infrastructure de Microsoft. La syntaxe est inspirée de Python. Boo encourage l&#39;extensibilité du langage ainsi que du compilateur.
</p>
-Des:
##----------------------------------------
=Pkg: branding-SLES 11 3.15 noarch
=Sum: SUSE Linux Enterprise Server Brand File
+Des:
<!-- DT:Rich -->
<p>This package contains the file /etc/SuSE-brand, and its name is used as a trigger for installation of correct vendor brand packages.
</p>
-Des:
##----------------------------------------
=Pkg: brp-check-suse 1.0 17.19 noarch
=Sum: build root policy check scripts
+Des:
<!-- DT:Rich -->
<p>build root policy check scripts
</p>
-Des:
##----------------------------------------
=Pkg: bsf 2.3.0 321.29 noarch
=Sum: Bean Scripting Framework
+Des:
<!-- DT:Rich -->
<p>Bean Scripting Framework (BSF) est un ensemble de classes Java qui fournit
un langage de script avec intégration dans les applications Java applications, accès aux objets et méthodes Java
depuis des langages de script. BSF permet l&#39;écriture
de JSP dans des langages autres que Java tout en fournissant l&#39;accès aux bibliothèques de classe
Java. En plus, BSF permet à un application Java d&#39;être écrite en partie (ou dynamiquement étendue) par un langage  de script.
Ceci est possible via une API qui permet l&#39;appel de moteur de script depuis Java et un registre des objets qui exposent les objets Java à ces moteurs.
</p><p>
Le paquet BSF supporte actuellement ::<ul>
<li>Javascript (en utilisant Rhino ECMAScript, du projet)
</li><li>les feuilles de style XSLT (en tant que composant des projets Apache XML Xalan et
Xerces)
</li></ul>
En plus, les langages suivants sont supportés avec leur propre moteur BSF :<ul>
<li>Java (en utilisant BeanShell, du projet BeanShell)
</li><li>JRuby
</li><li>JudoScript
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: bsf-javadoc 2.3.0 321.29 noarch
=Sum: Javadoc pour bsf
+Des:
<!-- DT:Rich -->
<p>Bean Scripting Framework (BSF) est un ensemble de classes Java qui fournit
un langage de script avec intégration dans les applications Java applications, accès aux objets et méthodes Java
depuis des langages de script. BSF permet l&#39;écriture
de JSP dans des langages autres que Java tout en fournissant l&#39;accès aux bibliothèques de classe
Java. En plus, BSF permet à un application Java d&#39;être écrite en partie (ou dynamiquement étendue) par un langage  de script.
Ceci est possible via une API qui permet l&#39;appel de moteur de script depuis Java et un registre des objets qui exposent les objets Java à ces moteurs.
</p><p>
Ce paquet contient la documentation Javadoc pour Bean Scripting Framework.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2 2.0 58.19 noarch
=Sum: Langage de scripts basé sur Java  (BeanShell Version 2.x)
+Des:
<!-- DT:Rich -->
<p>Beanshell est un petit interpréteur de source Java avec des fonctionnalités de scripting objet, écrit en Java.
Beanshell exécute des programmes Java standards.
Beanshell support des objets écrits par une simple méthode comme en Perl ou en JavaScript(tm).
Vous pouvez utiliser BeanShell interactivement pour des tests ou pour faciliter le débogage ou comme un simple moteur de script pour vos applications.
En résumé Beanshell est un interpréteur Java dynamique avec quelques fonctionnalités pratiques en plus.
Une autre manière de le décrire est de le comparer à ce que Tcl/Tk est au C : Beanshell peut être embarqué. Vous pouvez appeler Beanshell depuis vos applications Java ou exécuter du code Java dynamiquement lors de l&#39;exécution ou fournir une extension de scripting à vos applications.
Réciproquement, vous pouvez appeler vos applications Java et vos objets depuis Beanshell;
Travailler avec les objets Java et les APIs se fait dynamiquement.
Puisque BeanShell est écrit en Java et s&#39;exécute dans le même environnement que votre application, vous pouvez passer librement des références vers de &quot;vrais objets&quot; dans vos scripts et les retourner comme résultats.
</p><p>
Avec la version 2.0, Beanshell est devenu complètement compatible Java.
BeanShell est alors capable d&#39;interpréter du code Java ordinaire et de charger des fichiers sources depuis le class path.
Les classes scriptées BeanShell sont complètement typées et sont visibles par le code Java extérieur ou par introspection comme des classes ordinaires.
Cependant leur implantation est complètement dynamique et peuvent inclure des scripts Beanshell que ce soit dans leur corps, dans leurs méthodes ou dans leur constructeur.
Les utilisateurs peuvent librement mélanger des scripts Beanshell non structurés et des classes entièrement scriptées.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-classgen 2.0 58.19 noarch
=Sum: Langage de scripts basé sur Java  (BeanShell Version 2.x) (Support ASM)
+Des:
<!-- DT:Rich -->
<p>Support de ASM pour bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: bsh2-javadoc 2.0 58.19 noarch
=Sum: Langage de scripts basé sur Java  (BeanShell Version 2.x) (Documentation Java)
+Des:
<!-- DT:Rich -->
<p>javadoc pour bsh2.
</p>
-Des:
##----------------------------------------
=Pkg: build 2010.02.11 0.3.19 noarch
=Sum: Script pour créer des RPMs SuSE
+Des:
<!-- DT:Rich -->
<p>Ce paquet fournit un script pour créer des RPMs pour SuSE dans un environnement chroot.
</p>
-Des:
##----------------------------------------
=Pkg: cedict 20070331 2.7 noarch
=Sum: Free Chinese-English Dictionary in EDICT Format
+Des:
<!-- DT:Rich -->
<p>This is a free Chinese-English dictionary that can be used, for example, with Gjiten.
</p><p>
The objective of the CEDICT project is to create an online, downloadable
(as opposed to searchable-only) public-domain Chinese-English dictionary.
For the most part, the project is modelled on Jim Breen&#39;s highly successful
EDICT (Japanese-English dictionary) project and is intended to be a
collaborative effort with users providing entries and corrections to
the main file.
</p>
-Des:
##----------------------------------------
=Pkg: classpathx-mail 1.1.1 54.33 noarch
=Sum: GNU JavaMail is a free implementation of the JavaMail API specification
+Des:
<!-- DT:Rich -->
<p>GNU JavaMail is a free implementation of the JavaMail API specification, version 1.3. All the code has been written from scratch without reference to Sun&#39;s code, which allows GNU JavaMail to be used on a completely free operating system such as GNU/Linux or the Hurd. The code is optimized to work with free Java implementations, nothing prevents it from being used with any compliant JVM.
GNU JavaMail provides a protocol-independent framework for building mail client applications in Java. The API itself provides a complete MIME implementation, and drivers for individual messaging protocols, known as providers, can be plugged into the JavaMail framework dynamically. Several providers, implementing Internet standard protocols, are included with GNU JavaMail. These include:
SMTP
IMAP
POP3
NNTP including posting to news servers
The UNIX mbox format
Dan Bernstein&#39;s Maildir format
All these providers are feature-complete, and provide cryptographically secure access where relevant.
</p>
-Des:
##----------------------------------------
=Pkg: createrepo 0.4.11 9.17.1 noarch
=Sum: Creates a Common Metadata Repository
+Des:
<!-- DT:Rich -->
<p>This utility generates a common metadata repository from a directory of RPM packages.
</p>
-Des:
##----------------------------------------
=Pkg: crimson 1.1.3 2.27 noarch
=Sum: Java XML parser
+Des:
<!-- DT:Rich -->
<p>Crimson is a Java XML parser which supports XML 1.0 via the following
APIs:<ul>
<li>Java API for XML Processing (JAXP) 1.1 minus the javax.xml.transform
package. JAXP is a pluggable API that allows applications to access XML
documents in a parser-independent manner. It endorses the industry
standard SAX and DOM APIs and also adds a few classes under the
javax.xml.parsers package to implement pluggability and utility methods
Note: the javax.xml.transform package hierarchy of JAXP is not
implemented by Crimson. One implementation of javax.xml.transform can be
found at Xalan Java 2.
</li><li>SAX 2.0
</li><li>SAX2 Extensions version 1.0
</li><li>DOM Level 2 Core Recommendation
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: cross-spu-newlib 1.17.0.2008_09_12 6.16 noarch
=Sum: GNU newlib C library
+Des:
<!-- DT:Rich -->
<p>GNU newlib C library
</p>
-Des:
##----------------------------------------
=Pkg: cross-spu-newlib-headers 1.17.0.2008_09_12 6.22 noarch
=Sum: GNU newlib C library
+Des:
<!-- DT:Rich -->
<p>header files for GNU newlib C library
</p>
-Des:
##----------------------------------------
=Pkg: cryptix 3.2.0 59.18 noarch
=Sum: Java Crypto Package
+Des:
<!-- DT:Rich -->
<p>Cryptix 3 is a cleanroom implementation of Sun&#39;s Java Cryptography
Extensions (JCE) version 1.1. In addition to that, it contains the
Cryptix Provider, which delivers a wide range of algorithms and support
for PGP 2.x. Cryptix 3 runs on both JDK 1.1 and JDK 1.2 (Java 2).
</p>
-Des:
##----------------------------------------
=Pkg: cryptix-asn1 20011119 24.18 noarch
=Sum: Cryptix ASN1 Implementation
+Des:
<!-- DT:Rich -->
<p>Java asn1 implementation for Cryptix.
</p>
-Des:
##----------------------------------------
=Pkg: dbsplit-tools 0.6 2.8 noarch
=Sum: DocBook Splitting tools
+Des:
<!-- DT:Rich -->
<p>Tools for splitting and merging DocBook documents,
</p>
-Des:
##----------------------------------------
=Pkg: ddskk 20050123 149.29 noarch
=Sum: SKK (Programme de conversion de Kana à Kanji) pour Emacs
+Des:
<!-- DT:Rich -->
<p>SKK (Simple Kana to Kanji conversion program) is a Japanese input
method for Emacs. ddskk (Daredevil SKK) is a version of SKK that
is aggressively developed.
</p>
-Des:
##----------------------------------------
=Pkg: ddskk-xemacs 20050123 149.29 noarch
=Sum: SKK ('Programme de conversion de Kana à Kanji') pour XEmacs
+Des:
<!-- DT:Rich -->
<p>SKK (`Simple Kana to Kanji conversion program&#39;) is a Japanese input
method for XEmacs. ddskk (&#39;Daredevil SKK&#39;) is a version of SKK which
is aggressively developed.
</p>
-Des:
##----------------------------------------
=Pkg: derby 10.3.1.4 1.16 noarch
=Sum: Embeddable Database Engine Written in Java
+Des:
<!-- DT:Rich -->
<p>The Derby project develops open source database technology that is:
<ul>
<li>Pure Java
</li><li>Easy to use
</li><li>Small footprint
</li><li>Standards based
</li><li>Secure
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: desktop-data-openSUSE 11.1 36.19 noarch
=Sum: Fichiers de thème SuSE pour KDE et GNOME
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient la structure du menu SuSE pour KDE et GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-dsssl-stylesheets 1.79 19.6 noarch
=Sum: DSSSL Stylesheets for the DocBook DTD
+Des:
<!-- DT:Rich -->
<p>Use these DSSSL stylesheets to convert DocBook documents
into other formats. &quot;Print&quot; (TeX and RTF) and &quot;online&quot; (HTML) output formats are available.
</p><p>
The stylesheets are customizable and, within limits, it is possible to
adapt them for your own needs. Numerous native languages are
supported.
</p><p>
The authors of these stylesheets do not inlude any new features, but only fix bugs.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-toys 1.51.0 372.15 noarch
=Sum: Outils DocBook
+Des:
<!-- DT:Rich -->
<p>A shell script to convert SGML documents based on the DocBook DTD.
</p><p>
For usage information read:
</p><p>
/usr/share/doc/packages/docbook-toys/README
</p>
-Des:
##----------------------------------------
=Pkg: docbook-utils 0.6.14 171.14 noarch
=Sum: Small Wrapper Scripts for Processing DocBook Files
+Des:
<!-- DT:Rich -->
<p>The docbook-utils package is a set of a few small programs intended to ease
everyday use of technical documentation software based on the DocBook DTD, either written in SGML or XML.
</p><p>
Tasks they currently accomplish are:<ul>
<li>jw: convert SGML files to other formats (HTML, RTF, PostScript, PDF)
</li><li>sgmldiff: detect the differences in markup between two SGML files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: docbook-xml-website 2.6.0 1.14 noarch
=Sum: DTD and Stylesheets for Web Site Development
+Des:
<!-- DT:Rich -->
<p>A DTD in XML as an extension to DocBook XML and XSL stylesheets to
process it.
</p>
-Des:
##----------------------------------------
=Pkg: docbook-xsl-stylesheets 1.74.0 1.14 noarch
=Sum: XSL Stylesheets for the DocBook 4 and earlier
+Des:
<!-- DT:Rich -->
<p>These are the XSL stylesheets for DocBook XML and &quot;Simplified&quot; DocBook DTDs. Generally, stylesheets do not know any namespace and you should use these for DocBook 4 and earlier only.
</p><p>
The stylesheets transforms your DocBook document into (X)HTML, Manpages, XSL-FO (for PDF) and a few other formats.
</p><p>
XSL is a standard W3C stylesheet language for both print and online rendering. For more information about XSL, see the XSL page at the W3C.
</p>
-Des:
##----------------------------------------
=Pkg: docbook5-xsl-stylesheets 1.74.0 1.14 noarch
=Sum: XSL Stylesheets for DocBook 5
+Des:
<!-- DT:Rich -->
<p>These are the XSL stylesheets for DocBook. Generally, the stylesheets are namespace aware and you should use these for DocBook 5 only.
The stylesheets transforms your DocBook 5 document into (X)HTML, Manpages, XSL-FO (for PDF) and a some other formats.
XSL is a standard W3C stylesheet language for both print and online rendering.
For more information about XSL, see the XSL page at theW3C.
</p>
-Des:
##----------------------------------------
=Pkg: docbook_3 3.1 643.6 noarch
=Sum: DocBook DTD 3.x
+Des:
<!-- DT:Rich -->
<p>This package contains version 3.0 and 3.1 and an XML
version.  It is suitable for writing technical documentation.
</p><p>
</p><p>
The documentation can be found in /usr/share/doc/packages/docbook_3.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>For new projects, consider using version 4.x.
</p>
-Ins:
##----------------------------------------
=Pkg: docbook_5 5.0 1.14 noarch
=Sum: DocBook Schemas (DTD, RELAX NG, W3C Schema) for Version 5.x
+Des:
<!-- DT:Rich -->
<p>The version 5.0 release is a complete rewrite of DocBook in RELAX NG.
The intent of this rewrite is to produce a schema that is true to
the spirit of DocBook while simultaneously removing inconsistencies
that have arisen as a natural consequence of DocBook&#39;s long, slow evolution.
</p>
-Des:
##----------------------------------------
=Pkg: ecj 3.3 2.18 noarch
=Sum: Compilateur Eclipse pour Java
+Des:
<!-- DT:Rich -->
<p>Compilateur Eclipse pour Java
</p>
-Des:
##----------------------------------------
=Pkg: ecj-bootstrap 0.755 11.16 noarch
=Sum: Compilateur Java pour eclipse
+Des:
<!-- DT:Rich -->
<p>Ceci est le compilateur Java d&#39;Eclipse, qui est utilisé dans le paquet java-1_4_2-gcj-compat-devel
</p>
-Des:
##----------------------------------------
=Pkg: edict 20060807 2.8 noarch
=Sum: The Japanese Dictionary Files for Jim Breen's EDICT Project
+Des:
<!-- DT:Rich -->
<p>The EDICT file is the outcome of a voluntary project to produce a
freely available Japanese-English Dictionary in machine readable
form. This project has been under way since early 1991, beginning with
the small original file included with the MOKE (Mark&#39;s Own Kanji
Editor) Japanese word processing package. It had reached a size of nearly
103,000 entries when it was split into two files: EDICT containing the
&quot;normal&quot; dictionary entries, and ENAMDICT containing names. Both files
are used by a number of software packages and thousands of users
worldwide. The EDICT file now has over 60,000 entries and the ENAMDICT
file has over 160,000 entries.
</p><p>
</p><p>
Meanwhile, there are also some additional dictionary files for
special purposes, COMPDIC, for example, for words from the computing
and communication field.
</p>
-Des:
##----------------------------------------
=Pkg: flim 1.14.7 78.29 noarch
=Sum: Une bibliothèque Emacs pour MIME
+Des:
<!-- DT:Rich -->
<p>Pour l&#39;encodage et le décodage de messages MIME.
</p>
-Des:
##----------------------------------------
=Pkg: flim-xemacs 1.14.7 145.30 noarch
=Sum: Lisp Library for Basic Features Concerning Internet Messages
+Des:
<!-- DT:Rich -->
<p>FLIM is a library that provides basic features about message
representation or encoding.
</p>
-Des:
##----------------------------------------
=Pkg: fonts-thryomanes 1.2 40.9 noarch
=Sum: Greek TrueType Fonts
+Des:
<!-- DT:Rich -->
<p>These fonts include a complete set of Cyrillic letters and improved italic characters.
</p>
-Des:
##----------------------------------------
=Pkg: fop 0.95 1.33 noarch
=Sum: Formatter for Printing XSLT Processed XML Files
+Des:
<!-- DT:Rich -->
<p>FOP (Formatting Objects Processor) is driven by XSL formatting objects (XSL-FO). It is a Java application that reads a formatting object (FO) tree and renders the resulting pages to one of the following output formats: PDF (primary output target), PCL, PS, SVG, XML (area tree representation), Print, AWT, MIF, and TXT.
</p>
-Des:
##----------------------------------------
=Pkg: free-ttf-fonts 1.0 212.9 noarch
=Sum: Free TrueType Art Fonts
+Des:
<!-- DT:Rich -->
<p>More than 300 free fonts in True Type format. Most of them are in the art style and unusable as desktop fonts, but are great for any poster or illustration.
</p><p>
The fonts are copyrighted under the GPL or a Freeware license, but donations are requested by
the artists. Look in /usr/share/doc/packages/free-ttf-fonts/ for further information.
</p>
-Des:
##----------------------------------------
=Pkg: freefont 0.20080323 1.17 noarch
=Sum: Free UCS Outline Fonts
+Des:
<!-- DT:Rich -->
<p>A set of free outline (OpenType, for example) fonts covering the ISO
10646/Unicode UCS (Universal Character Set). The set consists of three
typefaces: one monospaced and two proportional (one with uniform and
one with modulated stroke.
</p>
-Des:
##----------------------------------------
=Pkg: gecko-sharp2 0.13 92.40 noarch
=Sum: Gecko bindings for Mono
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for the Gecko engine, through an easy-to-use widget that will allow you to embed a Mozilla browser window into your Gtk# application.
</p>
-Des:
##----------------------------------------
=Pkg: geronimo-jaf-1_0_2-api 1.1 104.30 noarch
=Sum: Geronimo J2EE server J2EE specifications
+Des:
<!-- DT:Rich -->
<p>Geronimo is Apache&#39;s ASF-licenced J2EE server project.
These are the J2EE-Specifications:
Java Activation Framework
</p>
-Des:
##----------------------------------------
=Pkg: geronimo-jms-1_1-api 1.1 104.30 noarch
=Sum: Geronimo J2EE server J2EE specifications
+Des:
<!-- DT:Rich -->
<p>Geronimo is Apache&#39;s ASF-licenced J2EE server project.
These are the J2EE-Specifications:
JMS Specification
</p>
-Des:
##----------------------------------------
=Pkg: geronimo-specs-poms 1.1 104.30 noarch
=Sum: Geronimo J2EE server J2EE specifications
+Des:
<!-- DT:Rich -->
<p>Geronimo is Apache&#39;s ASF-licenced J2EE server project.
These are the J2EE-Specifications:
The Project Object Model files for the geronimo-specs modules.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-branding-SLED 11.1 1.35 noarch
=Sum: SLED splash screen for GIMP
+Des:
<!-- DT:Rich -->
<p>This package contains openSUSE splash screen for the SLED.
</p>
-Des:
##----------------------------------------
=Pkg: gjdoc 0.7.9 1.26 noarch
=Sum: Javadoc replacement from classpath
+Des:
<!-- DT:Rich -->
<p>JavaDoc replacement from the classpath project.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-branding-SLES 2.16 47.3 noarch
=Sum: Definition of GNOME Default Applications
+Des:
<!-- DT:Rich -->
<p>This branding-style package sets default applications in GNOME in openSUSE.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-common 2.28.0 1.1.38 noarch
=Sum: Fichiers de base pour la plateforme GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Gnome-common contient les fichiers qui sont utilisés par la plupart des applications de l&#39;environnement GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-sharp 1.0.0 1.34 noarch
=Sum: Managed Implementation of libgnome-keyring.
+Des:
<!-- DT:Rich -->
<p>When the gnome-keyring-daemon is running, you can use this to retrieve/store confidential information such as passwords, notes or network services user information.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-sharp-devel 1.0.0 1.34 noarch
=Sum: Managed implementation of libgnome-keyring.
+Des:
<!-- DT:Rich -->
<p>When the gnome-keyring-daemon is running, you can use this to retrieve and store confidential information such as passwords, notes or network services user information.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-patch-translation 0.1 222.10.1 noarch
=Sum: Collect and Merge Translations From RPM Patches
+Des:
<!-- DT:Rich -->
<p>This package provides scripts for collecting strings changed in RPM patches and merging them to one translation compendium.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-crypto 2.0.1 41.30 noarch
=Sum: GNU Crypto
+Des:
<!-- DT:Rich -->
<p>GNU Crypto, part of the GNU project, released under the aegis of GNU, aims at providing free, versatile, high-quality, and provably correct implementations of cryptographic primitives and tools in the Java programming language for use by programmers and end-users.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-getopt 1.0.13 1.27 noarch
=Sum: Implantation Java de getopt
+Des:
<!-- DT:Rich -->
<p>The GNU Java getopt classes support short and long argument parsing in
a manner 100% compatible with the version of GNU getopt in glibc 2.0.6
with a mostly compatible programmer&#39;s interface as well. Note that this
is a port, not a new implementation.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-jaf 1.0 226.27 noarch
=Sum: GNU implementation of the JavaBeans Activation Framework
+Des:
<!-- DT:Rich -->
<p>GNU JAF is a framework for declaring what beans operate on what MIME type data. Content handler beans can be defined to handle particular MIME content. The JAF unites internet standards for declaring content with JavaBeans.
The JAF defines two mechanisms within the framework. The first, the file type map, specifies the MIME content type for a given file. The default implementation of this uses the UNIX mime.types format to map filename extensions to MIME types. The second mechanism, the command map, specifies the actions that can be applied to a given MIME content type. The default implementation of this uses the standard mailcap format to map actions to JavaBean&amp;#8482; classes. These beans can then view, edit, print, or perform whatever other action is required on the underlying resource.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-regexp 1.1.4 21.18 noarch
=Sum: Moteur d'expressions régulières Java NFA
+Des:
<!-- DT:Rich -->
<p>The gnu-regexp package is a pure-Java implementation of a traditional (non-POSIX) NFA regular expression engine.
Its syntax can emulate many popular development tools, including awk, sed, emacs, perl and grep.
For a relatively complete list of supported and non-supported syntax, refer to the syntax and usage notes.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-regexp-javadoc 1.1.4 21.18 noarch
=Sum: Moteur d'expressions régulières Java NFA (documentation)
+Des:
<!-- DT:Rich -->
<p>Javadoc for gnu-regexp.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash-docs 2.2.0 2.22 noarch
=Sum: Documentation pour GnuCash
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check-book likeregister GUI allows you to enter and track bank accounts, stocks, income and even currency trades.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensure balanced books.
This is the documentation module for GnuCash.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-doc 1.11 3.6.48 noarch
=Sum: GTK+ DocBook Documentation Generator
+Des:
<!-- DT:Rich -->
<p>Gtkdoc is a set of Perl scripts that generate API reference documentation in
DocBook format.  It can extract documentation from source code comments in a
manner similar to Java-doc.  It is used to generate the documentation for
GLib, Gtk+, and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-sharp2 0.12 92.42 noarch
=Sum: Connecteurs Mono pour GtkSourceView
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for GtkSourceView, a child of the GTK+ text widget which implements syntax highlighting and other features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: handedict 20080423 2.7 noarch
=Sum: Free Chinese-German Dictionary in EDICT Format
+Des:
<!-- DT:Rich -->
<p>This is a free Chinese-German dictionary that can be used, for
example, with Gjiten.
</p><p>
Everyone is invited to help develop it together with the authors (see
URL and e-mail addresses in the author list). It is based in large
parts on CEDICT which in turn has been modelled on Jim Breen&#39;s highly
successful EDICT (Japanese-English dictionary) project.
</p>
-Des:
##----------------------------------------
=Pkg: ht2html 2.0 1.27 noarch
=Sum: The www.python.org Web Site Generator
+Des:
<!-- DT:Rich -->
<p>ht2html is a simple Web page templating system that defines a format and provides a set of Python scripts for creating a simple, but consistent Web site.
</p><p>
All pages include a left corner logo, a sitewide site links top bar, and a directory-specific side.
</p><p>
The script is called ht2html because it generates .html files from .ht template files. The format of these .ht files is essentially usual HTML, with a set of optional RFC 2822-like headers at the top of the file. These headers specify certain options that ht2html&#39;s various classes support.
Python 2.0 or newer is required.
</p>
-Des:
##----------------------------------------
=Pkg: html-dtd 2004.1.26 78.6 noarch
=Sum: HTML DTDs (Document Type Definitions) and Documents
+Des:
<!-- DT:Rich -->
<p>Document Type Definitions (DTDs) for HTML 2.0, HTML 3.2, HTML 4.0, and
HTML 4.01.  This package also contains the documentation (located in <tt>/usr/share/doc/packages/html-dtd</tt>).
</p>
-Des:
##----------------------------------------
=Pkg: html2ps 1.0b5 225.31 noarch
=Sum: HTML to PostScript Converter
+Des:
<!-- DT:Rich -->
<p>An HTML to PostScript converter written in Perl.  Html2ps understands many
of the HTML 4.0 features.  From the home page
(http://www.tdb.uu.se/~jan/html2ps.html):
<ul>
<li>Many ways to control the appearance; this is mostly done using
configuration files.
</li><li>Support for processing multiple documents, can be done automatically by
recursively following links.
</li><li>A table of contents can be generated, either from the links in a
document or automatically from document headings.
</li><li>Configurable page headers and footers that can, for example, contain
document title, URL, page number, current heading, and date.
</li><li>Automatic hyphenation and text justification can be selected.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: icon-naming-utils 0.8.7 1.14 noarch
=Sum: Icon Name Specification Mapping Script
+Des:
<!-- DT:Rich -->
<p>A script for creating a symlink mapping for deprecated icon names to the
new icon naming specification names for desktop icon themes.
</p>
-Des:
##----------------------------------------
=Pkg: identity-abstraction 0.1.620 186.32 noarch
=Sum: A Java open source implementation of an identity-abstraction sdk
+Des:
<!-- DT:Rich -->
<p>The Bandit Identity Abstraction assists applications in constructing, comparing, querying, and authenticating digital identities.
</p>
-Des:
##----------------------------------------
=Pkg: ikvm 0.36.0.11 20.34 noarch
=Sum: A JVM Based on the Mono Runtime
+Des:
<!-- DT:Rich -->
<p>This package provides IKVM.NET, an open source Java compatibility layer for Mono, which includes a Virtual Machine, a bytecode compiler, and various class libraries for Java, as well as tools for Java and Mono interoperability.
</p>
-Des:
##----------------------------------------
=Pkg: inst-source-utils 2010.3.18 0.2.17 noarch
=Sum: Utilities for creating customized installation sources
+Des:
<!-- DT:Rich -->
<p>Utilities supporting autoinstallation and creation of customized installation and update sources.
</p><p>
Have a look at http://en.opensuse.org/Inst-source-utils for a detailed description of each script.
</p>
-Des:
##----------------------------------------
=Pkg: intltool 0.40.5 2.6 noarch
=Sum: Internationalization Tool Collection
+Des:
<!-- DT:Rich -->
<p>Some scripts to support translators working on GNOME and similar programs.
Data available in XML files (.oaf, .desktop, .sheet, and more) can be extracted into PO files. After translation, the new information is written back into the XML files.
</p>
-Des:
##----------------------------------------
=Pkg: ipadic 2.6.3 76.7 noarch
=Sum: Standard Japanese Dictionary for ChaSen
+Des:
<!-- DT:Rich -->
<p>Standard Japanese dictionary for ChaSen.
</p>
-Des:
##----------------------------------------
=Pkg: iso-codes-devel 3.3 1.20 noarch
=Sum: ISO code lists and translations
+Des:
<!-- DT:Rich -->
<p>This package provides the ISO-639 Language code list, the ISO-3166
Territory code list, and ISO-3166-2 sub-territory lists, and all their
translations in gettext .po form.
</p>
-Des:
##----------------------------------------
=Pkg: iwl5000-ucode 8.24.2.12 2.1.45 noarch
=Sum: Firmware for Intel PRO/Wireless 5100 ABGN and 5300 ABGN WLAN Cards
+Des:
<!-- DT:Rich -->
<p>This package is required for running Intel PRO/Wireless 5100 ABGN and 5300 ABGN
wireless LAN adapters.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-beanutils 1.7.0 26.19 noarch
=Sum: Jakarta Commons BeanUtils Package
+Des:
<!-- DT:Rich -->
<p>The scope of this package is to create a package of Java utility methods
for accessing and modifying the properties of arbitrary JavaBeans.  No
dependencies outside of the JDK are required, so the use of this package
is very lightweight.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-beanutils-javadoc 1.7.0 26.19 noarch
=Sum: Javadoc for jakarta-commons-beanutils
+Des:
<!-- DT:Rich -->
<p>The scope of the Jakarta Commons BeanUtils Package is to create a
package of Java utility methods for accessing and modifying the
properties of arbitrary JavaBeans.  No dependencies outside of the
JDK are required, so the use of this package is very lightweight.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons BeanUtils Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-codec 1.3 20.21 noarch
=Sum: Implementations of common encoders and decoders
+Des:
<!-- DT:Rich -->
<p>Commons Codec provides implementations of common encoders and decoders such as Base64, Hex, various phonetic encodings, and URLs.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-collections 3.2 88.32 noarch
=Sum: Jakarta Commons Collections Package
+Des:
<!-- DT:Rich -->
<p>The introduction of the Collections API by Sun in JDK 1.2 has been a
boon to quick and effective Java programming. Ready access to powerful
data structures has accelerated development by reducing the need for
custom container classes around each core object. Most Java2 APIs are
significantly easier to use because of the Collections API.
However, there are certain holes left unfilled by Sun&#39;s
implementations, and the Jakarta-Commons Collections Component strives
to fulfill them. Among the features of this package are:<ul>
<li>special-purpose implementations of Lists and Maps for fast access
</li><li>adapter classes from Java1-style containers (arrays, enumerations) to
Java2-style collections
</li><li>methods to test or create typical set theory properties of collections
such as union, intersection, and closure
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-collections-javadoc 3.2 88.32 noarch
=Sum: Javadoc for jakarta-commons-collections
+Des:
<!-- DT:Rich -->
<p>This package contains the javadoc documentation for the Jakarta Commons Collections package.
</p><p>
The introduction of the Collections API by Sun in JDK 1.2 has been a
boon to quick and effective Java programming. Ready access to powerful
data structures has accelerated development by reducing the need for
custom container classes around each core object. Most Java2 APIs are
significantly easier to use because of the Collections API.
However, there are certain holes left unfilled by Sun&#39;s
implementations, and the Jakarta-Commons Collections Component strives
to fulfill them. Among the features of this package are:<ul>
<li>special-purpose implementations of Lists and Maps for fast access
</li><li>adapter classes from Java1-style containers (arrays, enumerations) to
Java2-style collections.
</li><li>methods to test or create typical set-theory properties of collections
such as union, intersection, and closure.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-collections-tomcat5 3.2 88.32 noarch
=Sum: Jakarta Commons Collections Package
+Des:
<!-- DT:Rich -->
<p>The introduction of the Collections API by Sun in JDK 1.2 has been a
boon to quick and effective Java programming. Ready access to powerful
data structures has accelerated development by reducing the need for
custom container classes around each core object. Most Java2 APIs are
significantly easier to use because of the Collections API.
However, there are certain holes left unfilled by Sun&#39;s
implementations, and the Jakarta-Commons Collections Component strives
to fulfill them. Among the features of this package are:<ul>
<li>special-purpose implementations of Lists and Maps for fast access
</li><li>adapter classes from Java1-style containers (arrays, enumerations) to
Java2-style collections
</li><li>methods to test or create typical set theory properties of collections
such as union, intersection, and closure
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-daemon 1.0.1 20.18 noarch
=Sum: Jakarta Commons Daemon Package
+Des:
<!-- DT:Rich -->
<p>The scope of this package is to define an API in line with the current
Java(tm) Platform APIs to support an alternative invocation mechanism
that could be used instead of the public static void
main(String[]) method.  This specification covers the behavior and life
cycle of what is defined as Java(tm) daemons or, in other words,
noninteractive Java(tm) applications.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-daemon-javadoc 1.0.1 20.18 noarch
=Sum: Javadoc for jakarta-commons-daemon
+Des:
<!-- DT:Rich -->
<p>The scope of this package is to define an API in line with the current
Java(tm) Platform APIs to support an alternative invocation mechanism
which could be used instead of the above mentioned public static void
main(String[]) method.  This specification cover the behavior and life
cycle of what we define as Java(tm) daemons, or, in other words, non
interactive Java(tm) applications.
</p><p>
This package contains the javadoc documentation for jakarta-commons-daemon.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-dbcp 1.2.2 88.32 noarch
=Sum: Jakarta Commons DataBase Pooling Package
+Des:
<!-- DT:Rich -->
<p>The DBCP package creates and maintains a database connection pool
package written in the Java language to be distributed under the ASF
license. The package is available as a pseudo-JDBC driver and
via a DataSource interface. The package also supports multiple
logins to multiple database systems, reclamation of stale or dead
connections, testing for valid connections, PreparedStatement
pooling, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-dbcp-javadoc 1.2.2 88.32 noarch
=Sum: Javadoc for jakarta-commons-dbcp
+Des:
<!-- DT:Rich -->
<p>This package contains the javadoc documentation for the DBCP package.
</p><p>
The DBCP package shall create and maintain a database connection pool
package written in the Java language to be distributed under the ASF
license. The package shall be available as a pseudo-JDBC driver and
via a DataSource interface. The package shall also support multiple
logins to multiple database systems, reclamation of stale or dead
connections, testing for valid connections, PreparedStatement
pooling, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-dbcp-tomcat5 1.2.2 88.32 noarch
=Sum: Jakarta Commons DataBase Pooling Package
+Des:
<!-- DT:Rich -->
<p>The DBCP package creates and maintains a database connection pool
package written in the Java language to be distributed under the ASF
license. The package is available as a pseudo-JDBC driver and
via a DataSource interface. The package also supports multiple
logins to multiple database systems, reclamation of stale or dead
connections, testing for valid connections, PreparedStatement
pooling, and other features.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-digester 1.7 22.19 noarch
=Sum: Jakarta Commons Digester Package
+Des:
<!-- DT:Rich -->
<p>The goal of the Jakarta Commons Digester project is to create and
maintain an XML to Java object mapping package written in the Java
language to be distributed under the ASF license.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-digester-javadoc 1.7 22.19 noarch
=Sum: Javadoc for jakarta-commons-digester
+Des:
<!-- DT:Rich -->
<p>The goal of the Jakarta Commons Digester project is to create and
maintain a XML -&gt; Java object mapping package written in the Java
language to be distributed under the ASF license.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Digester Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-discovery 0.4 1.27 noarch
=Sum: Jakarta Commons Discovery
+Des:
<!-- DT:Rich -->
<p>The Discovery component is about discovering, or finding, implementations
for pluggable interfaces.  Pluggable interfaces are specified with the
intent that multiple implementations are, or will be, available to provide
the service described by the interface.  Discovery provides facilities for finding and instantiating classes and for lifecycle management of singleton (factory) classes.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-discovery-javadoc 0.4 1.27 noarch
=Sum: Javadoc for jakarta-commons-discovery
+Des:
<!-- DT:Rich -->
<p>The Discovery component is about discovering, or finding, implementations
for pluggable interfaces.  Pluggable interfaces are specified with the
intent that multiple implementations are, or will be, available to provide
the service described by the interface.  Discovery provides facilities for finding and instantiating classes, and for lifecycle management of singleton (factory) classes.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Discovery Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-el 1.0 25.18 noarch
=Sum: The Jakarta Commons Extension Language
+Des:
<!-- DT:Rich -->
<p>An implementation of standard interfaces and abstract classes for
javax.servlet.jsp.el, which is part of the JSP 2.0 specification.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-el-javadoc 1.0 25.18 noarch
=Sum: Javadoc for jakarta-commons-el
+Des:
<!-- DT:Rich -->
<p>An implementation of standard interfaces and abstract classes for
javax.servlet.jsp.el which is part of the JSP 2.0 specification.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Extension Language.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-fileupload 1.1.1 1.31 noarch
=Sum: Jakarta Commons FileUpload Package
+Des:
<!-- DT:Rich -->
<p>The javax.servlet package lacks support for RFC 1867, HTML file
upload.  This package provides a simple-to-use API for working with
such data.  The scope of this package is to create a package of Java
utility classes to read multipart/form-data within a
javax.servlet.http.HttpServletRequest.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-fileupload-javadoc 1.1.1 1.31 noarch
=Sum: Javadoc for jakarta-commons-fileupload
+Des:
<!-- DT:Rich -->
<p>The javax.servlet package lacks support for rfc 1867, html file
upload.  This package provides a simple to use api for working with
such data.  The scope of this package is to create a package of Java
utility classes to read multipart/form-data within a
javax.servlet.http.HttpServletRequest.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Fileupload Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-httpclient3 3.0.1 253.31 noarch
=Sum: Feature rich package for accessing resources via HTTP
+Des:
<!-- DT:Rich -->
<p>Although the java.net  package provides basic functionality for accessing resources via HTTP, it doesn&#39;t provide the full flexibility or functionality needed by many applications. The Jakarta Commons HttpClient component seeks to fill this void by providing an efficient, up-to-date, and feature-rich package implementing the client side of the most recent HTTP standards and recommendations.
</p><p>
Designed for extension while providing robust support for the base HTTP protocol, the HttpClient component may be of interest to anyone building HTTP-aware client applications such as web browsers, web service clients, or systems that leverage or extend the HTTP protocol for distributed communication.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-io 1.3.2 83.32 noarch
=Sum: Commons IO Package
+Des:
<!-- DT:Rich -->
<p>Commons-IO contains utility classes, stream implementations,
file filters, and endian classes.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-lang 2.3 1.30 noarch
=Sum: Jakarta Commons Lang Package
+Des:
<!-- DT:Rich -->
<p>The standard Java libraries fail to provide enough methods for
manipulation of its core classes. The Commons Lang Component provides
these extra methods.
The Commons Lang Component provides a host of helper utilities for the
java.lang API, notably string manipulation methods, basic numerical
methods, object reflection, creation and serialization, and system
properties. Additionally it contains an inheritable enum type, an
exception structure that supports multiple types of nested exceptions,
and a series of utilities dedicated to helping with building methods, such
as hashCode, toString and equals.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-launcher 1.1 1.27 noarch
=Sum: A Cross-Platform Java Application Launcher
+Des:
<!-- DT:Rich -->
<p>Commons-launcher eliminates the need for a batch or shell script to launch a Java class. Some situations where elimination of a batch or shell script may be desirable are:
<ul>
<li>You want to avoid having to determining where certain application paths are, for example, your application&#39;s home directory. Determining this dynamically in a Windows batch scripts is very tricky on some versions of Windows or when softlinks are used on Unix platforms.
</li><li>You want to avoid having to handle native file and path separators or native path quoting issues.
</li><li>You need to enforce certain system properties, such as java.endorsed.dirs when running with JDK 1.4.
</li><li>You want to allow users to pass custom JVM arguments or system properties without having to parse and reorder arguments in your script. This can be tricky or messy in batch and shell scripts.
</li><li>You want to bootstrap system properties from a configuration file instead hard-coding them in your batch and shell scripts.
</li><li>You want to provide localized error messages, which is very tricky to do in batch and shell scripts.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-launcher-javadoc 1.1 1.27 noarch
=Sum: Javadoc for jakarta-commons-launcher
+Des:
<!-- DT:Rich -->
<p>Commons-launcher eliminates the need for a batch or shell script to launch a Java class.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Launcher Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-logging 1.0.4 265.27 noarch
=Sum: Jakarta Commons Logging Package
+Des:
<!-- DT:Rich -->
<p>The commons-logging package provides a simple, component oriented
interface (org.apache.commons.logging.Log) together with wrappers for
logging systems. The user can choose at runtime which system they want
to use. In addition, a small number of basic implementations are
provided to allow users to use the package independently.
commons-logging was heavily influenced by Avalon&#39;s Logkit and Log4J. The
commons-logging abstraction is meant to minimize the differences between
the two and to allow a developer to not tie himself to a particular
logging implementation.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-logging-javadoc 1.0.4 265.27 noarch
=Sum: Javadoc for jakarta-commons-logging
+Des:
<!-- DT:Rich -->
<p>The commons-logging package provides a simple, component oriented
interface (org.apache.commons.logging.Log) together with wrappers for
logging systems. The user can choose at runtime which system they want
to use. In addition, a small number of basic implementations are
provided to allow users to use the package standalone.
commons-logging was heavily influenced by Avalon&#39;s Logkit and Log4J. The
commons-logging abstraction is meant to minimixe the differences between
the two, and to allow a developer to not tie himself to a particular
logging implementation.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Logging Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-modeler 2.0 21.28 noarch
=Sum: Jakarta Commons Modeler Package
+Des:
<!-- DT:Rich -->
<p>The Modeler project creates and maintains a set of Java
classes to provide a number of facilities for Model MBeans plus
unit tests and small examples of using these facilities to instrument
Java classes with Model MBean support.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-modeler-javadoc 2.0 21.28 noarch
=Sum: Javadoc for jakarta-commons-modeler
+Des:
<!-- DT:Rich -->
<p>The Modeler project shall create and maintain a set of Java
classes to provide the facilities described in the preceeding section, plus
unit tests and small examples of using these facilities to instrument
Java classes with Model MBean support.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Modeler Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-pool 1.3 1.27 noarch
=Sum: Jakarta Commons Pool Package
+Des:
<!-- DT:Rich -->
<p>The goal of the Pool package is to create and maintain an object
(instance) pooling package to be distributed under the ASF license.
The package supports a variety of pool implementations, but
encourages support of an interface that makes these implementations
interchangeable.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-pool-javadoc 1.3 1.27 noarch
=Sum: Javadoc for jakarta-commons-pool
+Des:
<!-- DT:Rich -->
<p>The goal of Pool package it to create and maintain an object
(instance) pooling package to be distributed under the ASF license.
The package should support a variety of pool implementations, but
encourage support of an interface that makes these implementations
interchangeable.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Pool Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-pool-tomcat5 1.3 1.27 noarch
=Sum: Jakarta Commons Pool Package
+Des:
<!-- DT:Rich -->
<p>The goal of the Pool package is to create and maintain an object
(instance) pooling package to be distributed under the ASF license.
The package supports a variety of pool implementations, but
encourages support of an interface that makes these implementations
interchangeable.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-validator 1.1.4 21.17 noarch
=Sum: Jakarta Commons Validator
+Des:
<!-- DT:Rich -->
<p>A common issue when receiving data either electronically or from user
input is verifying the integrity of the data. This work is repetitive
and becomes even more complicated when different sets of validation
rules need to be applied to the same set of data based, for example, on
locale. Error messages may also vary by locale. This package attempts
to address some of these issues and speed development and maintenance
of validation rules.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-commons-validator-javadoc 1.1.4 21.17 noarch
=Sum: Javadoc for jakarta-commons-validator
+Des:
<!-- DT:Rich -->
<p>A common issue when receiving data either electronically or from user
input is verifying the integrity of the data. This work is repetitive
and becomes even more complicated when different sets of validation
rules need to be applied to the same set of data based on locale for
example. Error messages may also vary by locale. This package attempts
to address some of these issues and speed development and maintenance
of validation rules.
</p><p>
This package contains the javadoc documentation for the Jakarta Commons Validator Package.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-taglibs-standard 1.1.1 234.27 noarch
=Sum: Open Source Implementation of the JSP Standard Tag Library
+Des:
<!-- DT:Rich -->
<p>This package contains releases for the 1.1.x versions of the Standard
Tag Library, Jakarta Taglibs&#39;s open source implementation of the JSP
Standard Tag Library (JSTL), version 1.1. JSTL is a standard under the
Java Community Process.
</p>
-Des:
##----------------------------------------
=Pkg: jakarta-taglibs-standard-javadoc 1.1.1 234.27 noarch
=Sum: Javadoc for jakarta-taglibs-standard
+Des:
<!-- DT:Rich -->
<p>This package contains the javadoc documentation for Jakarta Taglibs.
</p>
-Des:
##----------------------------------------
=Pkg: java_cup 0.10 233.24 noarch
=Sum: Java Source Interpreter
+Des:
<!-- DT:Rich -->
<p>java_cup is a LALR parser generator for Java.
</p>
-Des:
##----------------------------------------
=Pkg: javacc 4.0 1.27 noarch
=Sum: A Parser and Scanner Generator for Java
+Des:
<!-- DT:Rich -->
<p>Java Compiler Compiler (JavaCC) is the most popular parser generator for use with Java applications. A parser generator is a tool that reads a grammar specification and converts it to a Java program that can recognize matches to the grammar. In addition to the parser generator itself, JavaCC provides other standard capabilities related to parser generation such as tree building (via a tool called JJTree included with JavaCC), actions, debugging, etc.
</p>
-Des:
##----------------------------------------
=Pkg: javazic 1.6.0 2.25 noarch
=Sum: A time zone compiler for Java
+Des:
<!-- DT:Rich -->
<p>This is a time zone compiler for opensource Java Virtual Machine derived from
openjdk6 source code.
</p>
-Des:
##----------------------------------------
=Pkg: jdepend 2.9.1 72.27 noarch
=Sum: Java Design Quality Metrics
+Des:
<!-- DT:Rich -->
<p>JDepend traverses a set of Java class and source file directories and
generates design quality metrics for each Java package. JDepend allows
you to automatically measure the quality of a design in terms of its
extensibility, reusability, and maintainability to effectively manage
and control package dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: jdom 1.0 271.33 noarch
=Sum: JDOM is a Java Representation of an XML Document
+Des:
<!-- DT:Rich -->
<p>JDOM is, quite simply, a Java representation of an XML document. JDOM provides a way to represent that document for easy and efficient reading, manipulation, and writing. It has a straightforward API, is lightweight and fast, and is optimized for the Java programmer. It is an alternative to DOM and SAX, although it integrates well with both DOM and SAX.
</p>
-Des:
##----------------------------------------
=Pkg: jedit 4.2 282.28 noarch
=Sum: Programmer's Text Editor Written in Java
+Des:
<!-- DT:Rich -->
<p>jEdit is a cross-platform programmer&#39;s text editor written in Java.
</p><p>
Some of jEdit&#39;s features include:
<ul>
<li>Built-in macro language (BeanShell)
</li><li>Extensible plug-in architecture with more than 80 plug-ins available
</li><li>Plug-ins can be downloaded and installed from within jEdit using the plug-in manager feature
</li><li>Syntax highlighting for more than 80 languages
</li><li>Supports a large number of character encodings including UTF8 and Unicode
</li><li>Autoindenting of source code
</li><li>Folding (indent and marker based)
</li><li>Word wrap
</li><li>Unlimited undo and redo
</li><li>Highly configurable and customizable
</li><li>Every other feature, both basic and advanced, that you would expect to find in a text editor
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jessie 1.0.1 122.32 noarch
=Sum: A cleanroom implementation of the Java Secure Sockets Extension
+Des:
<!-- DT:Rich -->
<p>The clean-room JSSE API is quite complete, absent some better documentation comments. The provider contains most of the necessary code for the core of the SSL and TLS protocols, and development is currently focused on stability and the standard extensions to the TLS protocol.
</p>
-Des:
##----------------------------------------
=Pkg: jing 20030619 95.16 noarch
=Sum: Validator for RELAX NG in Java
+Des:
<!-- DT:Rich -->
<p>jing is an XML validator implemented in Java. It validates against the RELAX NG schema language and implements the following features:
<ul>
<li>RELAX NG 1.0 Specification
</li><li>RELAX NG Compact Syntax
</li><li>Parts of RELAX NG DTD Compatibility (checking of ID/IDREF/IDREFS)
</li></ul>
It also comes with experimental support for schema languages other than RELAX NG:
<ul>
<li>W3C XML Schema (based on Xerces-J)
</li><li>Schematron
</li><li>Name Space Routing Language
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: jlex 1.2.6 232.24 noarch
=Sum: A Lexical Analyzer Generator for Java
+Des:
<!-- DT:Rich -->
<p>JLex is a lexical analyzer generator for Java.
</p>
-Des:
##----------------------------------------
=Pkg: junit 3.8.2 1.24 noarch
=Sum: Java Regression Test Package
+Des:
<!-- DT:Rich -->
<p>JUnit is a regression testing framework written by Erich Gamma and Kent
Beck. It is used by the developer who implements unit tests in Java.
JUnit is open source software, released under the IBM Public License and
hosted on SourceForge.
</p>
-Des:
##----------------------------------------
=Pkg: jython 2.2 24.28 noarch
=Sum: Java Source Interpreter
+Des:
<!-- DT:Rich -->
<p>Jython is an implementation of the high-level, dynamic, object-oriented
language Python seamlessly integrated with the Java platform. The
predecessor to Jython, JPython, is certified as 100% Pure Java. Jython is
freely available for both commercial and noncommercial use and is
distributed with source code. Jython is complementary to Java and is
especially suited for the following tasks: Embedded scripting--Java
programmers can add the Jython libraries to their system to allow end
users to write simple or complicated scripts that add functionality to the
application. Interactive experimentation--Jython provides an interactive
interpreter that can be used to interact with Java packages or with
running Java applications. This allows programmers to experiment and debug
any Java system using Jython. Rapid application development--Python
programs are typically 2-10X shorter than the equivalent Java program.
This translates directly to increased programmer productivity. The
seamless interaction between Python and Java allows developers to freely
mix the two languages both during development and in shipping products.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-de-data 4.3.5 0.2.58 noarch
=Sum: Support de la langue allemande pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des traductions pour les programmes
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-de-doc 4.3.5 0.2.58 noarch
=Sum: Manuels en allemand pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des traductions de manuels d&#39;applications.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks-default 4.3.5 0.1.60 noarch
=Sum: Jeux de cartes par défaut pour les jeux KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les collections de jeux de cartes par défaut pour les jeux KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks-other 4.3.5 0.1.60 noarch
=Sum: Autres collections de jeux de cartes pour les jeux KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient plusieurs collections de jeux de cartes supplémentaires pour les jeux KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-devel-doc 3.5.10 23.28 noarch
=Sum: Additional Package Documentation
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient une documentation d&#39;API pour toutes les classes de bibliothèque
fournies par kdelibs. La page d&#39;index pour toutes les fonctions de l&#39;API KDE est :
</p><p>
file:/usr/share/doc/KDE3-API/index.html
</p>
-Des:
##----------------------------------------
=Pkg: kernel-docs 2.6.32.12 0.7.1 noarch
=Sum: Kernel Documentation
+Des:
<!-- DT:Rich -->
<p>These are the PDF documents and man pages (section 9) built from thecurrent kernel sources.
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-instsource-plugins-openSUSE-11-0 1.20 3.21 noarch
=Sum: OpenSuSE - KIWI Image System
+Des:
<!-- DT:Rich -->
<p>OpenSuSE - KIWI Image System InstSource plugins provides information
and plugin code to create meta information for a Novell/SUSE
installation source
This particular package contains the metadata plugins specific for the
openSUSE-11.0 targets.
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-instsource-plugins-openSUSE-11-1 2.0 5.4.27 noarch
=Sum: OpenSuSE - KIWI Image System
+Des:
<!-- DT:Rich -->
<p>OpenSuSE - KIWI Image System InstSource plugins provides information
and plugin code to create meta information for a Novell/SUSE
installation source
This particular package contains the metadata plugins specific for the
openSUSE-11.1 targets.
</p>
-Des:
##----------------------------------------
=Pkg: ladspa-devel 1.12.code10.3 57.22 noarch
=Sum: Include Files mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains include files to develop LADSPA plugins.
</p>
-Des:
##----------------------------------------
=Pkg: latex2html 2002.2.1 604.31 noarch
=Sum: LaTeX2HTML Converter
+Des:
<!-- DT:Rich -->
<p>LaTeX2HTML lets you easily convert basic LaTeX documents
into the HTML format. This allows both a written and
online version even of older LaTeX texts.
</p><p>
Find documentation in /usr/share/doc/packages/latex2html.
</p>
-Des:
##----------------------------------------
=Pkg: libgmm++-devel 3.0 4.22 noarch
=Sum: Generic C++ template library for sparse, dense and skyline matrices
+Des:
<!-- DT:Rich -->
<p>gmm++ is a generic C++ template library for sparse, dense and skyline matrices. It is built as a set of generic algorithms (mult, add, copy, sub-matrices, dense and sparse solvers ...) for any interfaced vector type or matrix type. It can be view as a glue library allowing cooperation between several vector and matrix types. However, basic sparse, dense and skyline matrix/vector types are built in Gmm++, hence it can be used as a standalone linear algebra library
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-devel-doc-data 4.6.2 1.6.10 noarch
=Sum: Qt Documentation (Architecture Independent Files)
+Des:
<!-- DT:Rich -->
<p>The package contains documentation and examples to develop Qt
applications. The SuSE help provides a search function for this documentation.
The package includes also a tutorial and examples.
</p>
-Des:
##----------------------------------------
=Pkg: limal-devtools 1.5.0 1.21 noarch
=Sum: LiMaL--Development Tools
+Des:
<!-- DT:Rich -->
<p>Scripts and templates for developing LiMaL modules and components.
Required for rebuilding the existing LiMaL modules and components.
</p>
-Des:
##----------------------------------------
=Pkg: lklug 0.3 2.9 noarch
=Sum: "Lanka Linux User Group" OpenType font for Sinhala
+Des:
<!-- DT:Rich -->
<p>&quot;Lanka Linux User Group&quot; OpenType font for Sinhala copyright 2004 by
Yannis Haralambous.  OTF tables added by Anuradha Ratnaweera an d
Harshani Devadithya, and modified by Harshula Jayasuriya. &quot;Kunddaliya&quot;
glyph Copyright (c) 2006 Harshula Jayasuriya
</p>
-Des:
##----------------------------------------
=Pkg: log4j-manual 1.2.15 26.30 noarch
=Sum: Java logging tool (Manual)
+Des:
<!-- DT:Rich -->
<p>Documentation for log4j.
</p>
-Des:
##----------------------------------------
=Pkg: log4j-mini 1.2.15 26.27 noarch
=Sum: Java logging tool (internal featureless package breaking dependency loop)
+Des:
<!-- DT:Rich -->
<p>Log4j is a tool to help the programmer output log statements to a variety of output targets.
</p>
-Des:
##----------------------------------------
=Pkg: lsb-appchk-webui 2.0.99 1.22 noarch
=Sum: Web user interface for the LSB application checker
+Des:
<!-- DT:Rich -->
<p>Web user interface for the LSB application checker. Contains a small embedded
Web server and allows to control the checker either remotely or locally.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-contrib 1.1.6 1.16 noarch
=Sum: A collection of contributed works to be used with the m17n library
+Des:
<!-- DT:Rich -->
<p>A collection of contributed works to be used with the m17n library,
mainly additional Indic input methods.
</p>
-Des:
##----------------------------------------
=Pkg: malaga-suomi 1.1 2.26 noarch
=Sum: Description of Finnish Morphology Written in Malaga
+Des:
<!-- DT:Rich -->
<p>Suomi-Malaga is a description of Finnish morphology written in Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-cs 0.17.20080113 1.17 noarch
=Sum: Czech Manual Pages
+Des:
<!-- DT:Rich -->
<p>This package contains the Czech manual pages.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-it 2.65 420.6 noarch
=Sum: LDP Man Pages (Italian)
+Des:
<!-- DT:Rich -->
<p>These are the Italian man pages of the Linux Documentation Project.
Note that they are normally older than the English versions.  For reference,
you should use the English versions.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ja 20070615 2.19 noarch
=Sum: LDP man Pages (Japanese)
+Des:
<!-- DT:Rich -->
<p>These are the Japanese man pages of the Linux Documentation Project.
Note that they are normally older than the English versions.  For reference,
you should use the English versions.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-ru 0.98 3.7 noarch
=Sum: LDP man Pages (Russian)
+Des:
<!-- DT:Rich -->
<p>These are the Russian man pages of the Linux Documentation Project.
Note that they are normally older than the English versions.  You should use the English versions as a reference.
</p>
-Des:
##----------------------------------------
=Pkg: man-pages-zh_CN 1.5 2.8 noarch
=Sum: Chinese translation of man pages from the CMPP project
+Des:
<!-- DT:Rich -->
<p>Chinese translation of man pages from the CMPP project
</p>
-Des:
##----------------------------------------
=Pkg: marble-data 4.3.5 0.2.26 noarch
=Sum: Données pour la visionneuse de cartes
+Des:
<!-- DT:Rich -->
<p>Marble est une visionneuse de cartes. Ce paquet contient ses données
</p>
-Des:
##----------------------------------------
=Pkg: mono-addins 0.4 1.40 noarch
=Sum: Mono Addins Framework
+Des:
<!-- DT:Rich -->
<p>Mono.Addins is a generic framework for creating extensible applications,
and for creating libraries which extend those applications.
</p>
-Des:
##----------------------------------------
=Pkg: mono-basic 2.0 6.34 noarch
=Sum: Mono's VB Runtime
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Mono&#39;s VB runtime.
</p>
-Des:
##----------------------------------------
=Pkg: mono-tools 2.0 6.40 noarch
=Sum: Collection of Tools and Utilities for Mono
+Des:
<!-- DT:Rich -->
<p>Mono Tools is a collection of development and testing programs and
utilities for use with Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-zeroconf 0.9.0 1.2.93 noarch
=Sum: A cross platform Zero Configuration Networking library for Mono
+Des:
<!-- DT:Rich -->
<p>Mono.Zeroconf is a cross platform Zero Configuration Networking library for Mono and .NET. It provides a unified API for performing the most common zeroconf operations on a variety of platforms and subsystems: all the operating systems supported by Mono and both the Avahi and Bonjour/mDNSResponder transports.
</p>
-Des:
##----------------------------------------
=Pkg: mono-zeroconf-provider-avahi 0.9.0 1.2.93 noarch
=Sum: A cross platform Zero Configuration Networking library for Mono
+Des:
<!-- DT:Rich -->
<p>Mono.Zeroconf is a cross platform Zero Configuration Networking library for Mono and .NET. It provides a unified API for performing the most common zeroconf operations on a variety of platforms and subsystems: all the operating systems supported by Mono and both the Avahi and Bonjour/mDNSResponder transports.
</p>
-Des:
##----------------------------------------
=Pkg: monodevelop 1.0 96.43 noarch
=Sum: A Full-Featured IDE for Mono and Gtk#
+Des:
<!-- DT:Rich -->
<p>MonoDevelop is intended to be a
full-featured integrated development environment (IDE) for
mono and Gtk#. It was originally a port of SharpDevelop
0.98. See http://monodevelop.com/ for more information.
</p>
-Des:
##----------------------------------------
=Pkg: monodoc-core 2.0 1.34 noarch
=Sum: Monodoc--A Documentation Browser Written in C#
+Des:
<!-- DT:Rich -->
<p>Monodoc is a documentation browser for the Mono
project. It is written in C# using the GTK# libraries.
</p>
-Des:
##----------------------------------------
=Pkg: mx4j 3.0.1 223.32 noarch
=Sum: Open Source Implementation of JMX Java API
+Des:
<!-- DT:Rich -->
<p>OpenJMX is an open source implementation of the
Java(TM) Management Extensions (JMX).
</p>
-Des:
##----------------------------------------
=Pkg: mx4j-javadoc 3.0.1 223.32 noarch
=Sum: Javadoc pour mx4j
+Des:
<!-- DT:Rich -->
<p>OpenJMX is an open source implementation of the
Java(TM) Management Extensions (JMX).
</p><p>
This package contains the javadoc documentation for OpenJMX.
</p>
-Des:
##----------------------------------------
=Pkg: mx4j-manual 3.0.1 223.32 noarch
=Sum: Manuel pour mx4j
+Des:
<!-- DT:Rich -->
<p>OpenJMX is an open source implementation of the
Java(TM) Management Extensions (JMX).
</p><p>
This package contains the manual for OpenJMX.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-african 20060117 8.18 noarch
=Sum: African Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The African dictionary for MySpell.
</p><p>
The MySpell spell checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-american 20060207 8.18 noarch
=Sum: American Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire américain pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org, le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-brazilian 20070606 8.18 noarch
=Sum: Brazilian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Brazilian dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-british 20050526 8.18 noarch
=Sum: British Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire anglais pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-catalan 0.1 8.18 noarch
=Sum: Catalan Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire catalan pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-czech 20060303 8.18 noarch
=Sum: Czech Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire tchèque pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-danish 20080314 8.18 noarch
=Sum: Danish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire danois pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-dutch 20070603 8.18 noarch
=Sum: Dutch Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire néerlandais pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-french 20060914 8.18 noarch
=Sum: French Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire français pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-german 20071211 8.18 noarch
=Sum: German Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire allemand pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-gujarati 20060929 8.18 noarch
=Sum: Gujarati Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Gujarati dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-hindi 0.1 8.18 noarch
=Sum: Hindi Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Hindi dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-hungarian 20080315 8.18 noarch
=Sum: Hungarian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire hongrois pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-italian 20050711 8.18 noarch
=Sum: Italian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire italien pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-norsk-bokmaal 20080310 8.18 noarch
=Sum: Norwegian Bokmaal Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire norvégien Bokmaal pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-norsk-nynorsk 20080310 8.18 noarch
=Sum: Norwegian Nynorsk Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire norvégien Nynorsk pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-polish 20080514 8.18 noarch
=Sum: Polish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire polonais pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-portuguese 20020629 8.18 noarch
=Sum: Portuguese Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire portugais pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-russian 20040406 8.18 noarch
=Sum: Russian Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire russe pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-slovak 20060724 8.18 noarch
=Sum: Slovak Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire slovaque pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-spanish 20051029 8.18 noarch
=Sum: Spanish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire espagnol pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-swedish 20080821 8.18 noarch
=Sum: Swedish Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>Le dictionnaire suédois pour MySpell.
</p><p>
Le correcteur orthographique MySpell est utilisé par la suite OpenOffice.org,
le compositeur Mozilla et la fenêtre de composition de messages Mozilla Mail.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-xhosa 20060123 8.18 noarch
=Sum: Xhosa Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Xhosa dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: myspell-zulu 20060120 8.18 noarch
=Sum: Zulu Dictionary for MySpell
+Des:
<!-- DT:Rich -->
<p>The Zulu dictionary for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite,
the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: mysql-connector-java 5.1.6 1.27 noarch
=Sum: Official JDBC Driver for MySQL
+Des:
<!-- DT:Rich -->
<p>MySQL Connector/J is a native Java driver that converts JDBC (Java Database
Connectivity) calls into the network protocol used by the MySQL database.
It lets developers working with the Java programming language easily build
programs and applets that interact with MySQL and connect all corporate
data, even in a heterogeneous environment. MySQL Connector/J is a Type
IV JDBC driver and has a complete JDBC feature set that supports the
capabilities of MySQL.
</p>
-Des:
##----------------------------------------
=Pkg: nant 0.86_beta1 37.34 noarch
=Sum: Ant for .NET
+Des:
<!-- DT:Rich -->
<p>NAnt is a free .NET build tool. In theory it is kind of like make without
make&#39;s wrinkles. In practice it&#39;s a lot like Ant.
</p>
-Des:
##----------------------------------------
=Pkg: ndesk-dbus 0.6.0 1.34 noarch
=Sum: Managed C# implementation of D-Bus
+Des:
<!-- DT:Rich -->
<p>This is a C# implementation of D-Bus. It&#39;s often referred to as &quot;managed
D-Bus&quot; to avoid confusion with existing bindings (which wrap libdbus).
</p><p>
It is a clean-room implementation based on the D-Bus Specification
Version 0.11 and study of the wire protocol of existing tools.
</p>
-Des:
##----------------------------------------
=Pkg: ndesk-dbus-glib 0.4.1 1.34 noarch
=Sum: Ndesk-dbus-glib provides glib integration for NDesk.DBus
+Des:
<!-- DT:Rich -->
<p>Ndesk-dbus-glibl provides glib integration for NDesk.DBus
</p>
-Des:
##----------------------------------------
=Pkg: ndesk-dbus-glib-devel 0.4.1 1.34 noarch
=Sum: Ndesk-dbus-glib provides glib integration for NDesk.DBus
+Des:
<!-- DT:Rich -->
<p>Ndesk-dbus-glibl provides glib integration for NDesk.DBus
</p>
-Des:
##----------------------------------------
=Pkg: nxml-mode 20041004 78.17 noarch
=Sum: New Emacs Add-On for Editing XML Documents
+Des:
<!-- DT:Rich -->
<p>nxml-mode is a new major mode for GNU Emacs that allows you to edit XML documents. It supports editing well-formed XML documents and also provides
schema-sensitive editing of XML documents using the RELAX NG Compact
Syntax.
</p><p>
To use this, you need the GNU Emacs version 21.x, preferably 21.3. XEmacs will not work properly.
</p>
-Des:
##----------------------------------------
=Pkg: objectweb-anttask 1.2 92.25 noarch
=Sum: Tâche Ant ObjectWeb
+Des:
<!-- DT:Rich -->
<p>Tâche Ant ObjectWeb
</p>
-Des:
##----------------------------------------
=Pkg: oldrhino 1.5 271.27 noarch
=Sum: JavaScript pour Java
+Des:
<!-- DT:Rich -->
<p>Rhino est une implémentation open source de JavaScript écrite entièrement
en Java. C&#39;est souvent embarqué au sein d&#39;applications Java pour permettre
à l&#39;utilisateur final d&#39;utiliser des scripts.
</p>
-Des:
##----------------------------------------
=Pkg: openclipart-svg 0.18 136.22 noarch
=Sum: Open Clip Art Library in the SVG File Format
+Des:
<!-- DT:Rich -->
<p>An extensive set of clip art graphics that can be used for free.
</p><p>
This package includes the pictures in the original SVG graphics file format.
</p>
-Des:
##----------------------------------------
=Pkg: oro 2.0.8 25.18 noarch
=Sum: Full regular expressions API
+Des:
<!-- DT:Rich -->
<p>The Jakarta-ORO Java classes are a set of text-processing Java classes
that provide Perl5 compatible regular expressions, AWK-like regular
expressions, glob expressions, and utility classes for performing
substitutions, splits, filtering filenames, etc. This library is the
successor to the OROMatcher, AwkTools, PerlTools, and TextTools
libraries from ORO, Inc. (www.oroinc.com). They have been donated to the
Jakarta Project by Daniel Savarese (www.savarese.org), the copyright
holder of the ORO libraries. Daniel will continue to participate in
their development under the Jakarta Project.
</p>
-Des:
##----------------------------------------
=Pkg: perlref 5.004.1 127.7 noarch
=Sum: Perl 5 Reference Guide
+Des:
<!-- DT:Rich -->
<p>Perl 5 Reference Guide
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-auth_sasl 1.0.2 19.27 noarch
=Sum: PEAR abstraction of various SASL mechanism responses
+Des:
<!-- DT:Rich -->
<p>This PEAR class provides code to generate responses to common SASL mechanisms, including:
</p><p>
o Digest-MD5
</p><p>
o CramMD5
</p><p>
o Plain
</p><p>
o Anonymous
</p><p>
o Login (Pseudo mechanism)
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-date 1.4.7 24.28 noarch
=Sum: PEAR date and time zone classes
+Des:
<!-- DT:Rich -->
<p>Generic PEAR classes for representation and manipulation of
dates, times and time zones without the need of timestamps,
which is a huge limitation for php programs. Includes time zone data,
time zone conversions and many date/time conversions.
It does not rely on 32-bit system date stamps, so
you can display calendars and compare dates that date
pre 1970 and post 2038. This package also provides a class
to convert date strings between Gregorian and Human calendar formats.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-db 1.7.12 30.28 noarch
=Sum: PEAR database abstraction layer
+Des:
<!-- DT:Rich -->
<p>PEAR DB is a database abstraction layer providing:
PEAR DB is a database abstraction layer providing:<ul>
<li>an OO-style query API
</li><li>portability features that make programs written
for one DBMS work with other DBMS&#39;s
</li><li>a DSN (data source name) format for specifying
database servers
</li><li>prepare/execute (bind) emulation for databases
that don&#39;t support it natively
</li><li>a result object for each query response
</li><li>portable error codes
</li><li>sequence emulation
</li><li>sequential and non-sequential row fetching as well
as bulk fetching
</li><li>formats fetched rows as associative arrays, ordered
arrays or objects
</li><li>row limit support
</li><li>transactions support
</li><li>table information interface
</li><li>DocBook and phpDocumentor API documentation
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: php5-pear-file 1.3.0 24.28 noarch
=Sum: Common PEAR file and directory routines
+Des:
<!-- DT:Rich -->
<p>This PEAR package Provides easy access to read/write to files along with
some common routines to deal with paths. Also provides
interface for handling CSV files.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-log 1.9.11 24.28 noarch
=Sum: PEAR Logging utilities
+Des:
<!-- DT:Rich -->
<p>The Log framework for PEAR provides an abstracted logging system. It supports logging to console, file, syslog, SQL, Sqlite, mail and mcal targets. It also provides a subject - observer mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-mail 1.1.14 1.28 noarch
=Sum: PEAR class that provides multiple interfaces for sending emails
+Des:
<!-- DT:Rich -->
<p>PEAR&#39;s Mail package defines an interface for implementing mailers under the PEAR hierarchy. It also provides supporting functions useful to multiple mailer backends. Currently supported backends include: PHP&#39;s native mail() function, sendmail, and SMTP. This package also provides a RFC822 email address list validation utility class.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pear-mail_mime 1.5.2 1.28 noarch
=Sum: PEAR classes to create and decode mime messages.
+Des:
<!-- DT:Rich -->
<p>This PEAR package provides classes to deal with creation and manipulation of mime messages.
</p>
-Des:
##----------------------------------------
=Pkg: pm-profiler 0.1 28.2.41 noarch
=Sum: Managing power options on servers
+Des:
<!-- DT:Rich -->
<p>Script infrastructure to enable/disable certain power management functions
via simple configuration files. It is intended for server use.
</p>
-Des:
##----------------------------------------
=Pkg: post-build-checks 1.0 56.6.3 noarch
=Sum: post checks for build after rpms have been created
+Des:
<!-- DT:Rich -->
<p>some scripts to check for problems like test-installing the newly created rpms and checking the logfile for errors.
</p><p>
This package will also set/change the following sysconfig variables, so it may
not be a good idea to install this to a running system:
/etc/sysconfig/security:PERMISSION_SECURITY=&quot;secure&quot;
/etc/sysconfig/clock:TIMEZONE=&quot;UTC&quot;
</p>
-Des:
##----------------------------------------
=Pkg: pothana2000 1.1 2.9 noarch
=Sum: OpenType font for Telugu
+Des:
<!-- DT:Rich -->
<p>Free OpenType font for Telugu created by
Dr. Tirumala Krishna Desikacharyulu
</p>
-Des:
##----------------------------------------
=Pkg: psgml 1.3.2 51.17 noarch
=Sum: Emacs Add-On to edit SGML/XML documents
+Des:
<!-- DT:Rich -->
<p>&#39;psgml&#39; supports you while editing SGML/XML documents.  It respects the context
of the used DTD (Document Type Definition) and offers the valid elements
and attributes.
</p><p>
Included are several helper tools: tdtd, xxml, psgml-xpointer.
</p><p>
For more info see README.SuSE.
</p><p>
Compiled for GNU Emacs (XEmacs has its own version!).
</p>
-Des:
##----------------------------------------
=Pkg: puretls 0.9 30.18 noarch
=Sum: Java implementation of SSLv3 and TLSv1
+Des:
<!-- DT:Rich -->
<p>PureTLS is a free Java-only implementation of the SSLv3 and TLSv1
(RFC2246) protocols. PureTLS was developed by Eric Rescorla for Claymore
Systems, Inc, but is being distributed for free because we believe that
basic network security is a public good and should be a commodity.
</p>
-Des:
##----------------------------------------
=Pkg: python-doc 2.6 8.9.19 noarch
=Sum: Additional Package Documentation for Python.
+Des:
<!-- DT:Rich -->
<p>Tutorial, Global Module Index, Language Reference, Library Reference,
Extending and Embedding Reference, Python/C API Reference,
Documenting Python, and Macintosh Module Reference in HTML format.
</p>
-Des:
##----------------------------------------
=Pkg: python-doc-pdf 2.6 8.9.19 noarch
=Sum: Python PDF Documentation
+Des:
<!-- DT:Rich -->
<p>Tutorial, Global Module Index, Language Reference, Library Reference,
Extending and Embedding Reference, Python/C API Reference, Documenting
Python, and Macintosh Module Reference in PDF format.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel-doc 3.3.8b 88.21 noarch
=Sum: Documentation pour le kit de développement Qt 3
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation for the Qt 3 Development Kit.
</p><p>
You will find documentation, precompiled examples, and a tutorial for getting started with Qt in /usr/lib/qt3/doc.
</p>
-Des:
##----------------------------------------
=Pkg: regexp 1.3 232.24 noarch
=Sum: Simple regular expressions API
+Des:
<!-- DT:Rich -->
<p>Regexp is a 100% Pure Java Regular Expression package that was
graciously donated to the Apache Software Foundation by Jonathan Locke.
He originally wrote this software back in 1996 and it has stood up quite
well to the test of time.
It includes complete Javadoc documentation as well as a simple Applet
for visual debugging and testing suite for compatibility.
</p>
-Des:
##----------------------------------------
=Pkg: regexp-javadoc 1.3 232.24 noarch
=Sum: Javadoc for regexp
+Des:
<!-- DT:Rich -->
<p>Regexp is a 100% Pure Java Regular Expression package that was
graciously donated to the Apache Software Foundation by Jonathan Locke.
He originally wrote this software back in 1996 and it has stood up quite
well to the test of time.
It includes complete Javadoc documentation as well as a simple Applet
for visual debugging and testing suite for compatibility.
</p><p>
This package contains the javadoc documentation for regexp.
</p>
-Des:
##----------------------------------------
=Pkg: rhino 1.7 6.25 noarch
=Sum: JavaScript pour Java
+Des:
<!-- DT:Rich -->
<p>Rhino is an open-source implementation of JavaScript written entirely
in Java. It is typically embedded into Java applications to provide
scripting to end users.
</p>
-Des:
##----------------------------------------
=Pkg: rpmlint 0.84 8.16.60 noarch
=Sum: Rpm correctness checker
+Des:
<!-- DT:Rich -->
<p>Rpmlint is a tool to check common errors on rpm packages.
Binary and source packages can be checked.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rails 2.3.5 1.1.34 noarch
=Sum: A web-application framework for the MVC pattern
+Des:
<!-- DT:Rich -->
<p>Rails is a web-application framework for the MVC pattern that includes both a
template engine, controller framework, and object-relational mapping package.
Everything needed to develop web-apps that can run on CGI, FastCGI, and
mod_ruby.
</p>
-Des:
##----------------------------------------
=Pkg: saxon 6.5.5 1.31 noarch
=Sum: The SAXON XSLT Processor from Michael Kay
+Des:
<!-- DT:Rich -->
<p>The SAXON package is a collection of tools for processing XML documents. The main components are:
<ul>
<li>An XSLT processor, which implements the Version 1.0 XSLT and XPath Recommendations from the World Wide Web Consortium, found at http://www.w3.org/TR/1999/REC-xslt-19991116 and http://www.w3.org/TR/1999/REC-xpath-19991116 with a number of powerful extensions. This version of Saxon also includes many of the new features defined in the XSLT 1.1 working draft, but for conformance and portability reasons these are not available if the stylesheet header specifies version=&quot;1.0&quot;.
</li><li>A Java library, which supports a similar processing model to XSL, but allows full programming capability, which you need if you want to perform complex processing of the data or to access external services such as a relational database
</li><li>A slightly improved version of the Aelfred parser from Microstar. (But you can use SAXON with any SAX-compliant XML parser if you prefer).
</li></ul>
So you can use SAXON by writing XSLT stylesheets, by writing Java applications, or by any combination of the two.
</p>
-Des:
##----------------------------------------
=Pkg: saxon-scripts 6.5.5 1.31 noarch
=Sum: Utility scripts for saxon
+Des:
<!-- DT:Rich -->
<p>Utility scripts for saxon.
</p>
-Des:
##----------------------------------------
=Pkg: selfhtml 8.1.2 1.16 noarch
=Sum: HTML reference
+Des:
<!-- DT:Rich -->
<p>A very good documentation of HTML, CSS, JavaScript, DHTML, XML/XSLT, CGI/Perl and more, with many additional tips for design, graphics, project management, etc.
</p><p>
Up to now there is only a german version. Translations into english, french, spanish and japanese are in progress but not yet completed.
</p>
-Des:
##----------------------------------------
=Pkg: selfphp 5.1.7 1.15 noarch
=Sum: PHP reference and tutorial
+Des:
<!-- DT:Rich -->
<p>Every PHP instruction is explained with at least one example and its output in the web-browser. Useful for beginners and for anvanced PHP programmers. Available in german only.
</p>
-Des:
##----------------------------------------
=Pkg: semi-xemacs 1.14.6 145.28 noarch
=Sum: library to provide MIME feature for XEmacs
+Des:
<!-- DT:Rich -->
<p>SEMI is a library to provide MIME feature for XEmacs.  MIME is a
proposed internet standard for including content and headers other
than (ASCII) plain text in messages
</p>
-Des:
##----------------------------------------
=Pkg: servletapi4 4.0.4 24.27 noarch
=Sum: Java servlet and JSP implementation classes
+Des:
<!-- DT:Rich -->
<p>This subproject contains the source code for the implementation classes
of the Java Servlet and JSP APIs (packages javax.servlet).
</p>
-Des:
##----------------------------------------
=Pkg: servletapi5 5.0.18 238.24 noarch
=Sum: Java servlet and JSP implementation classes
+Des:
<!-- DT:Rich -->
<p>This subproject contains the source code for the implementation classes
of the Java Servlet and JSP APIs (packages javax.servlet).
</p>
-Des:
##----------------------------------------
=Pkg: sil-charis 4.0.02 28.9 noarch
=Sum: smart Unicode font for Latin and Cyrillic scripts
+Des:
<!-- DT:Rich -->
<p>Charis is similar to Bitstream Charter, one of the first fonts
designed specifically for laser printers. It is highly readable and
holds up well in less-than-ideal reproduction environments. It also
has a full set of styles - regular, italic, bold, bold italic - and so
is more useful in general publishing than Doulos SIL. Charis is a
serif, proportionally-spaced font optimized for readability in long
printed documents.
</p><p>
The goal for this product was to provide a single Unicode-based font
family that would contain a comprehensive inventory of glyphs needed
for almost any Roman- or Cyrillic-based writing system, whether used
for phonetic or orthographic needs. In addition, there is provision
for other characters and symbols useful to linguists. This font makes
use of state-of-the-art font technologies to support complex
typographic issues, such as the need to position arbitrary
combinations of base glyphs and diacritics optimally.
</p>
-Des:
##----------------------------------------
=Pkg: sil-doulos 4.0.14 28.9 noarch
=Sum: smart Unicode font for Latin and Cyrillic scripts
+Des:
<!-- DT:Rich -->
<p>The goal for this product was to provide a single Unicode-based font
family that would contain a comprehensive inventory of glyphs needed
for almost any Roman- or Cyrillic-based writing system, whether used
for phonetic or orthographic needs. In addition, there is provision
for other characters and symbols useful to linguists. This font makes
use of state-of-the-art font technologies to support complex
typographic issues, such as the need to position arbitrary
combinations of base glyphs and diacritics optimally.
</p><p>
Doulos is very similar to Times/Times New Roman, but only has a single
face - regular. It is intended for use alongside other Times-like
fonts where a range of styles (italic, bold) are not needed.
</p><p>
The Doulos SIL font contains near-complete coverage of all the
characters defined in Unicode 4.1 for Latin and Cyrillic. In total,
over 2,400 glyphs are included, providing support for over 1,900
characters as well as a large number of ligated character sequences
(e.g., contour tone letters used in phonetic transcription of tonal
languages).
</p><p>
In addition, alternately-designed glyphs are also provided for a
number of characters for use in particular contexts. The glyphs are
accessible in applications that support advanced font technologies,
specifically the Graphite or OpenType technologies. These technologies
are also utilized to provide automatic positioning of diacritics
relative to base characters in arbitrary base+diacritic combinations
(including combinations involving multiple diacritics).
</p><p>
Some important issues with respect to Unicode need to be borne in
mind. Unicode is a character encoding and not a glyph encoding. Thus
you should endeavor to use the character that reflects your character
needs rather than finding a glyph that looks right and using its
character code. Thus, for example, there is only one code for CAPITAL
ENG (U+014A), although there are 4 different glyph shapes for this
character in use around the world. Therefore it is necessary to use
other means, such as user-selectable font features, to ensure that
your document displays the right glyph for the character that you are
anticipating. The advanced typographic capabilities mentioned above
provide this very capability.
</p>
-Des:
##----------------------------------------
=Pkg: skkdic 20050123 149.29 noarch
=Sum: main dictionary for SKK
+Des:
<!-- DT:Rich -->
<p>main dictionary for SKK
</p>
-Des:
##----------------------------------------
=Pkg: slib 3b1 19.21 noarch
=Sum: Portable Scheme Library
+Des:
<!-- DT:Rich -->
<p>SLIB is a portable Scheme library providing compatibility and utility
functions for all standard Scheme implementations.
</p>
-Des:
##----------------------------------------
=Pkg: struts 1.2.9 162.31.1 noarch
=Sum: Web application framework
+Des:
<!-- DT:Rich -->
<p>Welcome to the Struts Framework! The goal of this project is to provide
an open source framework useful in building web applications with Java
Servlet and JavaServer Pages (JSP) technology. Struts encourages
application architectures based on the Model-View-Controller (MVC)
design paradigm, colloquially known as Model 2 in discussions on various
servlet and JSP related mailing lists.
Struts includes the following primary areas of functionality:
A controller servlet that dispatches requests to appropriate Action
classes provided by the application developer.
JSP custom tag libraries, and associated support in the controller
servlet, that assists developers in creating interactive form-based
applications.
Utility classes to support XML parsing, automatic population of
JavaBeans properties based on the Java reflection APIs, and
internationalization of prompts and messages.
Struts is part of the Jakarta Project, sponsored by the Apache Software
Foundation.
</p>
-Des:
##----------------------------------------
=Pkg: struts-javadoc 1.2.9 162.31.1 noarch
=Sum: Javadoc for struts
+Des:
<!-- DT:Rich -->
<p>Welcome to the Struts Framework! The goal of this project is to provide
an open source framework useful in building web applications with Java
Servlet and JavaServer Pages (JSP) technology.
</p><p>
This package contains the javadoc documentation for Struts.
</p>
-Des:
##----------------------------------------
=Pkg: struts-manual 1.2.9 162.31.1 noarch
=Sum: Maual for struts
+Des:
<!-- DT:Rich -->
<p>Welcome to the Struts Framework! The goal of this project is to provide
an open source framework useful in building web applications with Java
Servlet and JavaServer Pages (JSP) technology.
</p><p>
This package contains the manual for Struts.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-doc 1.4 1.15 noarch
=Sum: Documentation files for Subversion
+Des:
<!-- DT:Rich -->
<p>This package contains the subversion book (see http://svnbook.red-bean.com/) and a configuration file to make this book accessible via apache2.
</p>
-Des:
##----------------------------------------
=Pkg: susedoc 4.2_20081009 12.14 noarch
=Sum: XML Build Mechanics for Novell, SUSE, and openSUSE Documentation
+Des:
<!-- DT:Rich -->
<p>This RPM consists of a set of stylesheets, scripts and makefiles that are used to create HTML, PDF and Wiki documents from Novdoc/DocBook XML.
</p><p>
See also http://en.opensuse.org/Documentation_Team and
http://developer.novell.com/wiki/index.php/Lessons_for_Lizards.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_cz 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Czech)
+Des:
<!-- DT:Rich -->
<p>This package contains the Czech localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_es 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Spanish)
+Des:
<!-- DT:Rich -->
<p>This package contains the Spanish localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_fr 2007.08.22 80.18 noarch
=Sum: SuSE Help-System (French)
+Des:
<!-- DT:Rich -->
<p>This package contains the French localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_hu 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Hungarian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Hungarian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp_it 2007.08.22 80.18 noarch
=Sum: SuSE Help System (Italian)
+Des:
<!-- DT:Rich -->
<p>This package contains the Italian localization of the SuSE Help System.
</p><p>
For more information, see the susehelp base package.
</p>
-Des:
##----------------------------------------
=Pkg: svg-schema 20030114 2.6 noarch
=Sum: SVG DTDs and Documentation
+Des:
<!-- DT:Rich -->
<p>Contains the following DTDs:
<ul>
<li>&quot;Scalable Vector Graphics&quot; (SVG) 1.0 Specification, W3C Recommendation 04 September 2001.
</li><li>&quot;Scalable Vector Graphics&quot; (SVG) 1.1 Specification, W3C Recommendation 14 January 2003
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: taglib-sharp 2.0.3.3 0.1.95 noarch
=Sum: Multimedia metadata reading/writing library for popular formats
+Des:
<!-- DT:Rich -->
<p>TagLib# is a metadata or &quot;tag&quot; reader and writer library that supports the most common movie and music formats, abstracting away format specificity. TagLib# offers either a common API for all formats or access to specific APIs for a given format.
</p>
-Des:
##----------------------------------------
=Pkg: taglib-sharp-devel 2.0.3.3 0.1.95 noarch
=Sum: Multimedia metadata reading/writing library for popular formats
+Des:
<!-- DT:Rich -->
<p>TagLib# is a metadata or &quot;tag&quot; reader and writer library that supports the most common movie and music formats, abstracting away format specificity. TagLib# offers either a common API for all formats or access to specific APIs for a given format.
</p>
-Des:
##----------------------------------------
=Pkg: tei-roma 2.11 1.16 noarch
=Sum: TEI Schema or DTD Generator
+Des:
<!-- DT:Rich -->
<p>Roma is a shell script and XSL stylesheets for building a customized TEI schema or DTD.  It uses xsltproc, trang, and Perl.
</p>
-Des:
##----------------------------------------
=Pkg: tei-xsl-stylesheets 5.4.24 2.7 noarch
=Sum: XSL stylesheets for TEI XML
+Des:
<!-- DT:Rich -->
<p>Stylesheets to transform TEI XML documents (version p4 and p5) to HTML or to XSL Formatting Objects (FO). You can also produce LaTeX output.
</p><p>
Use it with xsltproc (part of libxslt), Saxon, or any other XSLT processor.
</p>
-Des:
##----------------------------------------
=Pkg: terminus-font 4.20 2.12 noarch
=Sum: readable fixed width fonts for X11 and the Linux console
+Des:
<!-- DT:Rich -->
<p>Terminus Font is designed for long (8 and more hours per day) work
with computers. Version 4.03 contains 538 characters, covering code
pages ISO8859-1/2/5/9/15/16, Windows-1250/1251/1252/1254,
IBM-437/852/855/866, KOI8-R/U/E/F, Bulgarian-MIK, Paratype-PT154/PT254
and Macintosh-Ukrainian, and also the vt100 and xterm pseudographic
characters.
</p><p>
The sizes and styles present are 8x14-normal, 8x14-bold,
8x14-EGA/VGA-bold, 8x16-normal, 8x16-bold, 8x16-EGA/VGA-bold,
10x20-normal, 10x20-bold, 12x24-normal, 12x24-bold and 14x28-normal
(which&#39;s weight is actually between normal and bold).
</p>
-Des:
##----------------------------------------
=Pkg: texlive 2007 219.34.6 noarch
=Sum: The Base System of TeXLive
+Des:
<!-- DT:Rich -->
<p>After installing texlive and the package texlive-latex, find a large
selection of documentation for TeX, LaTeX, and various layout styles
in /usr/share/texmf/doc.
</p><p>
TeX (pronounced tech) is an interpreter for text formatting and was
developed by Donald E. Knuth.  It works with control and macro commands
on a text file. Working with TeX is similar to typesetting methods.
LaTeX is a complex macro package that removes the cryptical TeX
interface and does most of the work for the user.
</p><p>
TeX uses special fonts produced by the MetaFont program. Various
printer drivers and an X11 viewer are also included in this package.
The teTeX package is based on the standard TeX package of Karl Berry,
which makes configuration much easier. It is also possible to use
PostScript fonts. A real PostScript printer is required, however.
If the ghostscript (gs) package is installed, all drivers for printing and
viewing can use these fonts. Note, however, that the fonts included in
the ghostscript package are not identical to Adobe&#39;s PostScript fonts.
The copyright prohibids us to include them on the CD.
</p><p>
Besides these features, the programs MakeIndex (for producing
indexes) and BibTeX (for literature data processing) exist.
</p><p>
The texlive package includes a full texmf tree, many programs like
tex, dvips, etc., shell script configuration, and a big collection
of documentations. This package is easily configured by the script
texconfig and has multilanguage options.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-arab 2007 219.34.6 noarch
=Sum: (La)TeX Macro Package for Arab and Hebrew
+Des:
<!-- DT:Rich -->
<p>This package consist of at least two packages. The ArabTeX package
extends the capabilities of (La)TeX to generate Arabic and Hebrew
text. The Arabi package provides the Right-to-Left scripts support
for TeX without the need of any external preprocessor.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-cjk 2007 219.34.6 noarch
=Sum: LaTeX Macro Package for CJK (Chinese/Japanese/Korean)
+Des:
<!-- DT:Rich -->
<p>CJK LaTeX is a macro package for LaTeX to enable typesetting Chinese,
Japanese, and Korean. It supports (simultaneously) various CJK
encodings, such as Big5, GB, JIS, KS, and CNS.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-cjk-latex-extras 20070515 2.19 noarch
=Sum: Extra fonts and scripts for CJK LaTeX
+Des:
<!-- DT:Rich -->
<p>This package contains some extra font setup files and scripts
to automatically generate fonts and setup files to use with
CJK LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-context 2007 219.34.6 noarch
=Sum: The conTeXt system depending on pdfTeX
+Des:
<!-- DT:Rich -->
<p>The conTeXt macro package is written in TeX and, depending on the
configuration, is able to use the pdf output format.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-devel 2007 219.34.6 noarch
=Sum: The WEB tools, the headers and library of the Kpathsea tools
+Des:
<!-- DT:Rich -->
<p>The purpose of the Kpathsea library is to return a file name from a
list of directories.  This package provides the static library and the
header files for compiling and linking programs with Kpathsea support.
For the normal use of TeX and LaTeX, this package is not required.
</p><p>
WEB is a programming language designed to force the programmer to write
the documentation during programming.  For example, Donald Erwin Knuth
has written his typesetting program TeX in WEB.
</p><p>
The tools tangle and weave are used to produce the ready to compile
source code in Pascal and the documentation in TeX.
</p><p>
This package is not required for the use of TeX or LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-doc 2007 219.34.6 noarch
=Sum: The documentation of the TeXLive Base System
+Des:
<!-- DT:Rich -->
<p>This package includes the main documentation of the TeXLive
Base System.  The LaTeX documentation can be found in the
package texlive-latex-doc.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-dvilj 2007 219.34.6 noarch
=Sum: Printer drivers for LaserJets (obsolete)
+Des:
<!-- DT:Rich -->
<p>This package contains drivers for various LaserJets. In most cases,
these drivers are not used because, with the programs dvips and
ghostscript, not only the same print quality is reached, but, due to
the intermediate PostScript step, some very useful graphical features
are given.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-jadetex 2007 219.34.6 noarch
=Sum: TeX Processor for OpenJade
+Des:
<!-- DT:Rich -->
<p>With Sebastian Rahtz&#39;s macro package jadetex, it is possible to process
the output of the TeX back-end for OpenJade and produce DVI or PDF
files. Resulting DVI files are viewable with xdvi or printable like
any other DVI file.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-latex 2007 219.34.6 noarch
=Sum: All About LaTeX
+Des:
<!-- DT:Rich -->
<p>This package provides LaTeX. To be exact, LaTeX2e, and a huge amount
software for LaTeX.  This package is required by most (La)TeX
documents.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-latex-doc 2007 219.34.6 noarch
=Sum: All documentation about LaTeX
+Des:
<!-- DT:Rich -->
<p>This package includes all documentation about LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-metapost 2007 219.34.6 noarch
=Sum: All about MetaPost
+Des:
<!-- DT:Rich -->
<p>This package provides MetaPost, which is a program with a similar macro
language as MetaFont, but, in comparison to MetaFont, the output is not
a bitmap, but in PostScript.
</p><p>
If familiar with the language of MetaFont, this program will provide an
excellent tool for drawing. This can happens interactively, with a
file, or by an other program.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-musictex 2007 219.34.6 noarch
=Sum: MusiXTeX et MusicTeX
+Des:
<!-- DT:Rich -->
<p>This packages is only usable for TeX experts with musical ambitions. It
contains a music TeX format file musixtex for direct usage onto TeX
music files. LaTeX users should use the corresponding style file.  For
a description, look under /usr/share/texmf/doc/texlive-musictex/.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-omega 2007 219.34.6 noarch
=Sum: Omega, an extended TeX/LaTeX version with unicode
+Des:
<!-- DT:Rich -->
<p>The Omega typesetting system, an extension of TeX, is designed for
typesetting of all the world&#39;s languages. It normally  uses the unicode
character encoding standard as internal representation.
</p><p>
If this extension used together with the macro package LaTeX, this
version of Omega is called Lambda.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-ppower4 2007 219.34.6 noarch
=Sum: Post Process presentations in PDF
+Des:
<!-- DT:Rich -->
<p>PPower4 is used to post process presentations in PDF format
which were prepared using (La)TeX to add dynamic effects.
The PDF files can be created with pdf(La)Tex, (La)Tex or with
standard (La)TeX and then converted to PDF with dvipdfm(x).
</p>
-Des:
##----------------------------------------
=Pkg: texlive-tex4ht 2007 219.34.6 noarch
=Sum: Convertit le (La)TeX vers le HTML/XML
+Des:
<!-- DT:Rich -->
<p>Tex4ht does not parse (La)TeX source. Instead, Tex4ht uses (La)TeX
itself to produce a non-standard DVI file that it can then process.
This technique gives TeX4ht the robustness characteristic of
restricted-syntax systems such as hyperlatex and gellmu.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-tools 2007 219.34.6 noarch
=Sum: Utilities like DviToDvi, DeTeX, and LaCheck
+Des:
<!-- DT:Rich -->
<p>The DeTeX filter removes TeX and LaTeX macros.
</p><p>
The LaCheck utility is a syntax checker for LaTeX documents.
</p><p>
The DviToDvi utilities are
</p><p>
dvibook       rearranges pages into book signatures, adds blank pages as needed
</p><p>
dviselect     selects pages and page ranges
</p><p>
dvitodvi      performs general page rearrangement of selected pages
</p><p>
dviconcat     concatenation of DVI files
</p><p>
Three simple scripts for scaling DIN A4 pages and rearranging two by
two onto a DIN A4 page (a4toa5) are included. The number of pages must
be even (which can be done by odd2even or dvibook).
</p>
-Des:
##----------------------------------------
=Pkg: texlive-xetex 2007 219.34.6 noarch
=Sum: XeTeX, an extended TeX/LaTeX version for unicode
+Des:
<!-- DT:Rich -->
<p>The XeTeX typesetting system is based on a merger of
Donald Knuth&#39;s TeX system with Unicode and modern font technologies.
</p><p>
If this extension used together with the macro package LaTeX, this
version of XeTeX is called XeLaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-xmltex 2007 219.34.6 noarch
=Sum: Typesetting XML with TeX
+Des:
<!-- DT:Rich -->
<p>xmltex is a system for typesetting XML files with TeX. It may be used
on its own or in conjunction with another TeX format. (LaTeX is assumed
for most examples).
</p><p>
xmltex supports the XML Namespace Recommendation. Arbitrary prefixes
may be used in document instances and in definition files. It supports
any encoding that matches ASCII in the first 127 positions. UTF-8,
latin-1, and KOI8-R are included in the distribution. Other encodings
may be trivially added.
</p><p>
Further documentation may be obtained by running manual.tex through
LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: timezone-java 2010h 0.2.17 noarch
=Sum: Timezone Descriptions
+Des:
<!-- DT:Rich -->
<p>These are configuration files that describe available time zones - this package
is intended for Java Virtual Machine based on OpenJDK.
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6 6.0.18 20.3.1 noarch
=Sum: Apache Servlet/JSP Engine, RI for Servlet 2.5/JSP 2.1 API
+Des:
<!-- DT:Rich -->
<p>Tomcat is the servlet container that is used in the official Reference
Implementation for the Java Servlet and JavaServer Pages technologies.
The Java Servlet and JavaServer Pages specifications are developed by
Sun under the Java Community Process.
</p><p>
Tomcat is developed in an open and participatory environment and
released under the Apache Software License version 2.0. Tomcat is intended
to be a collaboration of the best-of-breed developers from around the world.
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-admin-webapps 6.0.18 20.3.1 noarch
=Sum: The host-manager and manager web applications for Apache Tomcat
+Des:
<!-- DT:Rich -->
<p>The host-manager and manager web applications for Apache Tomcat
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-docs-webapp 6.0.18 20.3.1 noarch
=Sum: The docs web application for Apache Tomcat
+Des:
<!-- DT:Rich -->
<p>The docs web application for Apache Tomcat
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-javadoc 6.0.18 20.3.1 noarch
=Sum: Javadoc generated documentation for Apache Tomcat
+Des:
<!-- DT:Rich -->
<p>Javadoc generated documentation for Apache Tomcat
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-jsp-2_1-api 6.0.18 20.3.1 noarch
=Sum: Apache Tomcat JSP API implementation classes
+Des:
<!-- DT:Rich -->
<p>Apache Tomcat JSP API implementation classes
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-lib 6.0.18 20.3.1 noarch
=Sum: Libraries needed to run the Tomcat Web container
+Des:
<!-- DT:Rich -->
<p>Libraries needed to run the Tomcat Web container
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-servlet-2_5-api 6.0.18 20.3.1 noarch
=Sum: Apache Tomcat Servlet API implementation classes
+Des:
<!-- DT:Rich -->
<p>Apache Tomcat Servlet API implementation classes
</p>
-Des:
##----------------------------------------
=Pkg: tomcat6-webapps 6.0.18 20.3.1 noarch
=Sum: The ROOT and examples web applications for Apache Tomcat
+Des:
<!-- DT:Rich -->
<p>The ROOT and examples web applications for Apache Tomcat
</p>
-Des:
##----------------------------------------
=Pkg: trang 20030619 286.25 noarch
=Sum: Schema Converter Based on RELAX NG
+Des:
<!-- DT:Rich -->
<p>Trang is a command line converter for XML schema languages. The following languages are supported:
<ul>
<li>RELAX NG (XML syntax)
</li><li>RELAX NG compact syntax
</li><li>XML 1.0 DTDs
</li><li>W3C XML Schema
</li></ul>
W3C XML Schema is not supported for input.
</p><p>
Trang can also derive a schema from XML documents.
</p><p>
Trang will try to build human-readable schemas; aspects of the input schema will be preserved as much as possible (including definitions, spreading over files, annotations, and comments).
</p>
-Des:
##----------------------------------------
=Pkg: translation-update-upstream 20100412 0.4.1 noarch
=Sum: Tool for Translation Update from Upstream
+Des:
<!-- DT:Rich -->
<p>This is a tool providing update of translations using available upstream resources.
</p><p>
The tool tool is intended for use during package compilation as a first command after unpacking of source code.
</p><p>
For more see README and HOWTO.
</p><p>
This package also includes translation update data files.
</p>
-Des:
##----------------------------------------
=Pkg: treeline 1.2.0 2.10 noarch
=Sum: Versatile Tree-Style Outliner for Defining Custom Data Schemas
+Des:
<!-- DT:Rich -->
<p>TreeLine is a versatile tool for working with all kinds of information that fit into a tree-like structure.
</p><p>
It can be used to edit bookmark files, create mini-databases (for example, for addresses, tasks, records, or CDs), outline documents, or just collect ideas.
It can also be used as a generic editor for XML files.
</p><p>
The data schemas for any node in the data tree can be customized and new types of nodes can be defined.
The way data is presented on the screen, exported to HTML, or printed can be defined with HTML-like templates.
Plug-ins can be written to load and save data from and to custom file formats or external data sources and extend the functionality of TreeLine.
</p><p>
TreeLine is written in Python and uses the PyQt bindings to the Qt toolkit, which makes it very portable.
</p>
-Des:
##----------------------------------------
=Pkg: update-desktop-files 11.1 1.22 noarch
=Sum: A Build Tool to Update Desktop Files
+Des:
<!-- DT:Rich -->
<p>This package provides further translations and a shell script to update
desktop files. It is used by the %suse_update_desktop_file rpm macro.
</p>
-Des:
##----------------------------------------
=Pkg: webkit-sharp 0.2 2.40 noarch
=Sum: WebKit bindings for Mono
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and used
primarily in Apple&#39;s Safari browser. It is made to be embedded in other
applications, such as mail readers, or web browsers.
</p><p>
This package provides Mono bindings for WebKit libraries.
</p>
-Des:
##----------------------------------------
=Pkg: wsdl4j 1.5.1 21.32 noarch
=Sum: Web Services Description Language Toolkit for Java
+Des:
<!-- DT:Rich -->
<p>The Web Services Description Language for Java Toolkit (WSDL4J) allows the
creation, representation, and manipulation of WSDL documents describing
services.  This codebase will eventually serve as a reference implementation
of the standard created by JSR110.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2-demo 2.7.0 217.24 noarch
=Sum: Demonstration and samples for xalan-j2.
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSLT processor for transforming XML documents into HTML,
text, or other XML document types. It implements the W3C Recommendations
for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
be used from the command line, in an applet or a servlet, or as a module
in other program.
</p><p>
This package contains demonstration and sample files for Xalan.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2-javadoc 2.7.0 217.24 noarch
=Sum: Javadoc for xalan-j2
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSLT processor for transforming XML documents into HTML,
text, or other XML document types. It implements the W3C Recommendations
for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
be used from the command line, in an applet or a servlet, or as a module
in other program.
</p><p>
This package contains the javadoc documentation for Xalan.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2-manual 2.7.0 217.24 noarch
=Sum: Manual for xalan-j2
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSLT processor for transforming XML documents into HTML,
text, or other XML document types. It implements the W3C Recommendations
for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
be used from the command line, in an applet or a servlet, or as a module
in other program.
</p><p>
This package contains the manual for Xalan.
</p>
-Des:
##----------------------------------------
=Pkg: xano-mincho 20040509 2.9 noarch
=Sum: Japanese "XANO-Mincho-U32" TrueType font JIS X 0213:2004
+Des:
<!-- DT:Rich -->
<p>Japanese &quot;XANO-Mincho-U32&quot; TrueType font JIS X 0213:2004
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages 20070427 107.31 noarch
=Sum: XEmacs Packages
+Des:
<!-- DT:Rich -->
<p>A collection of additional lisp packages for XEmacs.
You must install this package when you want to use the XEmacs
package, they are needed for most non-trivial XEmacs functions.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages-el 20070427 107.31 noarch
=Sum: Emacs-Lisp source files for the XEmacs packages
+Des:
<!-- DT:Rich -->
<p>Most Emacs-Lisp source files are not needed for running XEmacs.
Most of them are also available in byte compiled form
and therefore not necessary at runtime.
The true XEmacs addict will install them nevertheless
because it is often useful and enlightening to have
a look at the Lisp sources.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-packages-info 20070427 107.31 noarch
=Sum: Info Files for the XEmacs Packages
+Des:
<!-- DT:Rich -->
<p>This package contains all the info files for the extra
packages for XEmacs.
All these files can be read online with XEmacs and describe
XEmacs and some of its modes.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-bootstrap 2.8.1 238.26 noarch
=Sum: Java XML parser
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-demo 2.8.1 238.27.1 noarch
=Sum: Demonstration and sample files for xerces-j2.
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains demonstration and sample files for Xerces2.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-javadoc-apis 2.8.1 238.27.1 noarch
=Sum: Javadoc for xerces-j2 apis
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains the javadoc documentation for the Xerces2 APIs.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-javadoc-dom3 2.8.1 238.27.1 noarch
=Sum: Javadoc for xerces-j2 DOM3.
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains the javadoc documentation for Xerces2 DOM3.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-javadoc-impl 2.8.1 238.27.1 noarch
=Sum: Javadoc for xerces-j2 implementation
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains the javadoc documentation for the Xerces2 implementation.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-javadoc-other 2.8.1 238.27.1 noarch
=Sum: Javadoc for other xerces-j2 components.
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains the javadoc documentation for other components of Xerces2.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-javadoc-xni 2.8.1 238.27.1 noarch
=Sum: Javadoc for xerces-j2 XNI.
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains the javadoc documentation for Xerces2 XNI.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-scripts 2.8.1 238.27.1 noarch
=Sum: Additional utility scripts for xerces-j2.
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p><p>
This package contains additional utility scripts for Xerces2.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-xml-apis 2.8.1 238.27.1 noarch
=Sum: APIs subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the APIs subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2-xml-resolver 2.8.1 238.27.1 noarch
=Sum: Resolver subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focussed on common code and guidelines for xml projects. The first focus will be to organize and have common packaging for the various externally-defined standards code relating to XML - things like the DOM, SAX, and JAXP interfaces.
</p><p>
This package contains the resolver subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xhtml-dtd 2002.8.9 103.14 noarch
=Sum: XHTML DTDs (Document Type Definitions)
+Des:
<!-- DT:Rich -->
<p>Document Type Definitions (DTDs) for XHTML 1/1.1 and some modularized variants.
</p>
-Des:
##----------------------------------------
=Pkg: xmanja 0.7 338.22 noarch
=Sum: Japanese online manuals for X11
+Des:
<!-- DT:Rich -->
<p>Japanese online manuals for X11
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons 1.3.02 227.24 noarch
=Sum: Common code for XML projects
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-apis-bootstrap 1.3 227.26 noarch
=Sum: Common code for XML projects - bootstrapping package
+Des:
<!-- DT:Rich -->
<p>This is xml-apis from the java-bootrapping-tools package.
DO NOT INSTALL ... THIS IS JUST FOR PACKAGING &amp; BOOTSTRAPPING JAVA PURPOSES!!
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-apis-javadoc 1.3.02 227.24 noarch
=Sum: Javadoc for xml-commons-apis
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the javadoc documentation for the APIs subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-apis-manual 1.3.02 227.24 noarch
=Sum: Manual for xml-commons-apis
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the manual for the APIs subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-resolver-bootstrap 1.1 237.26 noarch
=Sum: Resolver subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>This is xml-resolver from the java-bootrapping-tools package.
DO NOT INSTALL ... THIS IS JUST FOR PACKAGING &amp; BOOTSTRAPPING JAVA PURPOSES!!
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-resolver-javadoc 1.1 237.24 noarch
=Sum: Javadoc for xml-commons-resolver
+Des:
<!-- DT:Rich -->
<p>xml-commons is focussed on common code and guidelines for xml projects. The first focus will be to organize and have common packaging for the various externally-defined standards code relating to XML - things like the DOM, SAX, and JAXP interfaces.
</p><p>
This package contains the javadoc documentation for the resolver subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-which 1.3.02 227.24 noarch
=Sum: which subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the which subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-which-bootstrap 1.0.b2 227.26 noarch
=Sum: Which subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>This is xml-which from the java-bootrapping-tools package.
DO NOT INSTALL ... THIS IS JUST FOR PACKAGING &amp; BOOTSTRAPPING JAVA PURPOSES!!
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-which-javadoc 1.3.02 227.24 noarch
=Sum: Javadoc for xml-commons-which
+Des:
<!-- DT:Rich -->
<p>xml-commons is focused on common code and guidelines for xml projects.
It&#39;s first focus will be to organize and have common packaging for the
various externally-defined standards code relating to XML - things like
the DOM, SAX, and JAXP interfaces.
As the xml-commons community forms, we also hope to serve as a holding
area for other common xml-related utilities and code, and to help
promulgate common packaging, testing, documentation, and other
guidelines across all xml.apache.org subprojects.
</p><p>
This package contains the javadoc documentation for the which subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xmlbeans-mini 2.1.0 2.17 noarch
=Sum: XML-Java binding tool
+Des:
<!-- DT:Rich -->
<p>XMLBeans is a tool that allows you to access the full power
of XML in a Java friendly way. It is an XML-Java binding tool.
The idea is that you can take advantage the richness and
features of XML and XML Schema and have these features mapped
as naturally as possible to the equivalent Java language and
typing constructs. XMLBeans uses XML Schema to compile Java
interfaces and classes that you can then use to access and
modify XML instance data. Using XMLBeans is similar to using
any other Java interface/class, you will see things like
getFoo or setFoo just as you would expect when working with
Java. While a major use of XMLBeans is to access your XML
instance data with strongly typed Java classes there are also
API&#39;s that allow you access to the full XML infoset (XMLBeans
keeps full XML Infoset fidelity) as well as to allow you to
reflect into the XML schema itself through an XML Schema
Object model.
</p>
-Des:
##----------------------------------------
=Pkg: xmlformat 1.04 2.8 noarch
=Sum: XML document formatter
+Des:
<!-- DT:Rich -->
<p>xmlformat is a configurable formatter (or &quot;pretty-printer&quot;) for XML documents. It provides control over indentation, line-breaking, and text wrapping. These properties can be defined on a per-element basis.
</p><p>
xmlformat provides improved diagnostic information when a document is not
well-formed. (Prints line and token number, and stack trace).
</p>
-Des:
##----------------------------------------
=Pkg: xslide 0.2.2 241.29 noarch
=Sum: XSL Integrated Development Environment
+Des:
<!-- DT:Rich -->
<p>An Emacs mode to edit XSL files.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-branding-SLES 2.17.0 1.11 noarch
=Sum: SLES branding for YaST
+Des:
<!-- DT:Rich -->
<p>YaST branding for the SUSE LINUX Enterprise Server distribution
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ca-management 2.17.17 0.2.34 noarch
=Sum: YaST2 - CAs, Certificates and Requests Management
+Des:
<!-- DT:Rich -->
<p>Managing CAs, Certificates and Requests in an understanding way.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-devtools 2.17.6 1.15 noarch
=Sum: YaST2 - Outils de développement
+Des:
<!-- DT:Rich -->
<p>Scripts and templates for developing YaST2 modules and components.
Required for rebuilding the existing YaST2 modules and components (both YCP and C++).
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dhcp-server 2.17.3 1.48 noarch
=Sum: YaST2 - Configuration du serveur DHCP
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for DHCP server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dirinstall 2.17.3 1.50 noarch
=Sum: YaST2 - Installation dans un répertoire
+Des:
<!-- DT:Rich -->
<p>This package contains scripts for installing a new system into separate directory.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-dns-server 2.17.12 0.4.93 noarch
=Sum: YaST2 - DNS Server Configuration
+Des:
<!-- DT:Rich -->
<p>Ca paquet contient les composants YaST2 pour la configuration du serveur DNS.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ftp-server 2.17.5 0.1.147 noarch
=Sum: YaST2 - Configuration FTP
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for FTP configuration.
It can to configure two daemons: pure-ftpd and vsftpd.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-http-server 2.17.5 1.53 noarch
=Sum: YaST2 - Configuration du serveur HTTP
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for HTTP server (Apache2) configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-inetd-doc 2.17.3 1.53 noarch
=Sum: YaST2 - Network Services Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring the inetd and xinetd daemons (documentation).
</p>
-Des:
##----------------------------------------
=Pkg: yast2-installation-devel-doc 2.17.75 0.2.13 noarch
=Sum: YaST2 - Installation Parts
+Des:
<!-- DT:Rich -->
<p>System installation code as present on installation media.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-instserver 2.17.5 0.1.1 noarch
=Sum: YaST2 - Installation Server Configuration and Management
+Des:
<!-- DT:Rich -->
<p>This package allows you to configure an installation server suitable for installaing SUSE Linux over the network. Currently FTP, HTTP and NFS sources are supported.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-iscsi-server 2.17.8 0.1.108 noarch
=Sum: YaST2 - Configuration of iSCSI target
+Des:
<!-- DT:Rich -->
<p>Configuration of iSCSI target
</p>
-Des:
##----------------------------------------
=Pkg: yast2-isns 2.17.2 0.2.2 noarch
=Sum: YaST2 - Configuration of Internet Storage Naming Service (isns)
+Des:
<!-- DT:Rich -->
<p>This package provides the YaST2 configuration for Internet Storage Naming Service (iSNS).
</p><p>
The iSNS provides registration functions that allow all entities in a storage network to register and query the iSNS database.  Both iSCSI initiators and targets register with this service. Discovery Domains are used in the iSNS service to place register nodes into manageable groupings. This package provide the ability to administer these Discovery Domains.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-kerberos-server 2.17.7 0.1.164 noarch
=Sum: YaST2 - Configuration du serveur Kerberos
+Des:
<!-- DT:Rich -->
<p>Fournit une configuration basique du serveur Kerberos par le centre de controle
YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-live-installer 2.17.5 0.1.86 noarch
=Sum: YaST2 - Installation depuis le Live-CD/DVD
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST component to deploy a live media to the hard disk of the computer.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mail-plugins 2.17.5 1.3.66 noarch
=Sum: YaST2-Users/Group Plugins for the mail delivery configuration
+Des:
<!-- DT:Rich -->
<p>Plugins for the YaST2 users modul for enterprise mail server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nfs-server 2.17.7 1.1.2 noarch
=Sum: YaST2 - Configuration du serveur NFS
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuration of an NFS server.
NFS stands for network file system access.
It allows access to files on remote machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nis-server 2.17.2 1.53 noarch
=Sum: YaST2 - Network Information Services (NIS) Server Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for NIS server configuration.
NIS is a service similar to yellow pages.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-nis-server-devel-doc 2.17.2 1.53 noarch
=Sum: YaST2 - Developer documentation for yast2-nis-server
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for yast2-nis-server
</p>
-Des:
##----------------------------------------
=Pkg: yast2-phone-services 2.16.0 19.53 noarch
=Sum: YaST2 - Phone Services Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains YaST2 modules to configure additional
phone services, for example fax and answering machines.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-pkg-bindings-devel-doc 2.17.45 0.2.10 noarch
=Sum: YaST2 - Documentation for yast2-pkg-bindings package
+Des:
<!-- DT:Rich -->
<p>This documenation package describes the package manager API (Pkg:: namespace) used in YaST scripts.
The documentation is autogenerated from the pkg-bindings sources.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-power-management 2.17.7 0.1.84 noarch
=Sum: YaST2 - Power Management Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for Power management configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-product-creator 2.17.35 0.2.16 noarch
=Sum: YaST2 - Module pour créer de nouveaux produits
+Des:
<!-- DT:Rich -->
<p>A wizard for creating your own product (installation images, live ISO, XEN images etc.), based on existing installation sources.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-slp-server 2.17.4 0.2.48 noarch
=Sum: YaST2 SLP Daemon Server Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for the configuration of an SLP
daemon.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-sshd 2.17.2 1.21 noarch
=Sum: YaST2 - Configuration du serveur SSH
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for SSH server configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-system-profile 2.17.2 1.38 noarch
=Sum: A YaST module to interact with system profiling tools
+Des:
<!-- DT:Rich -->
<p>yast2-system-profile uses profiling tools such as Smolt to collect and send system and hardware profiles of a linux system. This data is collected and based on these statistics developers will prioritize their work on drivers. The collected data may also help when asking hardware vendors to provide open source drivers.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-testsuite 2.16.2 1.27 noarch
=Sum: YaST2 - Testsuite
+Des:
<!-- DT:Rich -->
<p>This is a package for the YaST2 modules testsuite preparation and execution.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tftp-server 2.17.1 1.37 noarch
=Sum: YaST2 - Configuration du serveur TFTP
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring a TFTP server.
TFTP stands for Trivial File Transfer Protocol.
It is used for booting over the network.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-tv 2.17.5 0.2.33 noarch
=Sum: YaST2 - Configuration TV
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le composant de YaST2 pour la configuration des cartes TV.
</p>
-Des:
##----------------------------------------
=Pkg: CASA 1.7.1592 2.3.53 x86_64
=Sum: Novell Common Authentication Service Adapter (CASA)
+Des:
<!-- DT:Rich -->
<p>CASA (Common Authentication Services Adaptor) is a common authentication and security package providing a set of libraries for application and service developers to provide single sign-on to an enterprise network.  CASA provides a local on box credential store that is purely session based in 1.0.  This store is populated with your Desktop and Network Login credentials on Novell Linux Desktop, Windows and Apple workstations.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-32bit 1.7.1592 2.3.53 x86_64
=Sum: Novell Common Authentication Service Adapter (CASA)
+Des:
<!-- DT:Rich -->
<p>CASA (Common Authentication Services Adaptor) is a common authentication and security package providing a set of libraries for application and service developers to provide single sign-on to an enterprise network.  CASA provides a local on box credential store that is purely session based in 1.0.  This store is populated with your Desktop and Network Login credentials on Novell Linux Desktop, Windows and Apple workstations.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-cli 1.7.1592 2.3.53 x86_64
=Sum: CASA Command Line Interface
+Des:
<!-- DT:Rich -->
<p>This package contains a CLI (command line interface) that providesa way for administrators to set, reset or delete credentials used by services.
These credentials are stored in CASA.
</p>
-Des:
##----------------------------------------
=Pkg: CASA-devel 1.7.1592 2.3.53 x86_64
=Sum: CASA include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that can use CASA (Common Authnetication Services Adapter)for credential storage and single sign-on.
</p>
-Des:
##----------------------------------------
=Pkg: CASA_auth_token_client 1.7.1587 1.43 x86_64
=Sum: Novell CASA Authentication Token Libraries for Client Applications
+Des:
<!-- DT:Rich -->
<p>CASA_auth_token is an authentication token infrastructure with support
for multiple authentication mechanisms with an emphasis on providing a
scalable single sign-on solution.
</p><p>
A key feature of CASA_auth_token is that its authentication tokens
contain identity information about the entity being authenticated. This
information contained in the tokens is configured on a per-service
basis. Because of this feature, we say that CASA_auth_token projects an
&quot;Authenticated Identity&quot;.
</p><p>
The CASA_auth_token_client package contains the necessary library and
configuration files for client applications to obtain authentication
tokens.
</p>
-Des:
##----------------------------------------
=Pkg: CASA_auth_token_client-devel 1.7.1587 1.43 x86_64
=Sum: Novell CASA Authentication Token Client Development Files
+Des:
<!-- DT:Rich -->
<p>CASA_auth_token is an authentication token infrastructure with support for multiple authentication mechanisms with an emphasis on providing a scalable single sign-on solution.
</p><p>
A key feature of CASA_auth_token is that its authentication tokens contain identity information about the entity being authenticated. This information is made available to the consuming services. The amount of information contained in the tokens is configured on a per-service basis. Because of this feature, we say that CASA_auth_token projects an &quot;Authenticated Identity&quot;.
</p><p>
The CASA_auth_token_client-devel package contains the files necessary for the development of client applications that utilize the CASA (Common Authentication Service Adapter) authentication token infrastructure for authentication.
</p>
-Des:
##----------------------------------------
=Pkg: CodeAnalyst 2.8.54 1.1.14.70 x86_64
=Sum: CodeAnalyst is a Performance Analysis Suite for AMD-based System
+Des:
<!-- DT:Rich -->
<p>CodeAnalyst is a performance analysis suite. It provids graphical utilitys for running Oprofile, and analyzing result on AMD-based systems. CodeAnalyst includes several features to aid profile analysis such as inline-function analysis, code-block analysis, and a utility for profile comparison, DiffAnalayst.
</p>
-Des:
##----------------------------------------
=Pkg: ConsoleKit-devel 0.2.10 64.13.6 x86_64
=Sum: Developer package for ConsoleKit
+Des:
<!-- DT:Rich -->
<p>Developer package for ConsoleKit
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB-32bit 1.2.3 6.32 x86_64
=Sum: Graphics Library for Framebuffer Devices
+Des:
<!-- DT:Rich -->
<p>DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows, and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB-devel 1.2.3 6.32 x86_64
=Sum: Graphics Library for Framebuffer Devices
+Des:
<!-- DT:Rich -->
<p>DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows, and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ElectricFence 2.2.2 573.8 x86_64
=Sum: Debugger Malloc
+Des:
<!-- DT:Rich -->
<p>Outil de débogage de programmes C. (débogeur Malloc)
</p>
-Des:
##----------------------------------------
=Pkg: FastCGI 2.4.0 24.8 x86_64
=Sum: A Scalable, Open Extension to CGI
+Des:
<!-- DT:Rich -->
<p>FastCGI is a language-independent, scalable, open extension to CGI that provides high performance without the limitations of server-specific APIs.
</p>
-Des:
##----------------------------------------
=Pkg: FastCGI-devel 2.4.0 24.8 x86_64
=Sum: A scalable, open extension to CGI
+Des:
<!-- DT:Rich -->
<p>FastCGI is a language independent, scalable, open extension to CGI that provides high performance without the limitations of server specific APIs.
</p>
-Des:
##----------------------------------------
=Pkg: GraphicsMagick 1.2.5 4.31.1 x86_64
=Sum: Viewer and Converter for Images
+Des:
<!-- DT:Rich -->
<p>GraphicsMagick(TM) provides a powerful image manipulation andtranslation utility. It is capable of displaying still images and animations using the X Window system which provides a simple interface forinteractively editing images, and is capable of importing selected windows or the entire desktop.
GraphicsMagick is one of your choices if you need a program to manipulate
and display images.It can read and write over 88 image formats, including JPEG, TIFF, WMF, SVG, PNG, PNM, GIF, andPhoto CD. Besides it allows you to resize, rotate, sharpen, color reduce, or add special effects to an image and to save the result to any supported format.
GraphicsMagick may be used to create animated or transparent .gifs, to composite images, to create thumbnail images and a lot more.
If you want to develop your own applications
which use GraphicsMagick code or APIs, you need to install GraphicsMagick-devel as well.
</p><p>
This package is compiled with Q8, which means that it provides better performance on 8 bit images and less.
</p>
-Des:
##----------------------------------------
=Pkg: IlmBase-32bit 1.0.1 40.22 x86_64
=Sum: Base library for ILM software (OpenEXR)
+Des:
<!-- DT:Rich -->
<p>Base library for Industrial Light &amp; Magic software (OpenEXR).
<ul>
<li>Half is a class that encapsulates our 16-bit floating-point format.
</li><li>IlmThread is a thread abstraction library for use with OpenEXR and other software packages.  It currently supports pthreads and Windows threads.
</li><li>Imath implements 2D and 3D vectors, 3x3 and 4x4 matrices, quaternions and other useful 2D and 3D math functions.
</li><li>Iex is an exception-handling library.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: IlmBase-devel 1.0.1 40.22 x86_64
=Sum: Base library for ILM software (OpenEXR)
+Des:
<!-- DT:Rich -->
<p>Base library for Industrial Light &amp; Magic software (OpenEXR).
<ul>
<li>Half is a class that encapsulates our 16-bit floating-point format.
</li><li>IlmThread is a thread abstraction library for use with OpenEXR and other software packages.  It currently supports pthreads and Windows threads.
</li><li>Imath implements 2D and 3D vectors, 3x3 and 4x4 matrices, quaternions and other useful 2D and 3D math functions.
</li><li>Iex is an exception-handling library.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ImageMagick 6.4.3.6 7.20.1 x86_64
=Sum: Viewer and Converter for Images
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: ImageMagick-devel 6.4.3.6 7.20.1 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: LibVNCServer-devel 0.9.1 154.24 x86_64
=Sum: VNC Development Library
+Des:
<!-- DT:Rich -->
<p>VNC is a set of programs using the RFB (Remote Frame Buffer) protocol. They
are designed to &quot;export&quot; a frame buffer via the network.
It is already in wide use for administration, but it is not that easy to program a server yourself.
This has been changed by LibVNCServer.
</p><p>
X.org already has a virtual Xvnc server which you can start as an own
screen (e.g. :1) and connect to with a VNC client (e.g. vncviewer from
tightvnc).
</p><p>
The LibVNCServer-devel package contains the static libraries and header files for LibVNCServer.
</p>
-Des:
##----------------------------------------
=Pkg: Mesa-devel-32bit 7.7 0.4.41 x86_64
=Sum: Libraries, includes and more to develop Mesa applications
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to
that of OpenGL.* To the extent that Mesa utilizes the OpenGL command
syntax or state machine, it is being used with authorization from
Silicon Graphics, Inc.(SGI). However, the author does not possess an
OpenGL license from SGI, and makes no claim that Mesa is in any way a
compatible replacement for OpenGL or associated with SGI. Those who
want a licensed implementation of OpenGL should contact a licensed
vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It&#39;s
just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: Mesa-devel 7.7 0.4.41 x86_64
=Sum: Libraries, includes and more to develop Mesa applications
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to
that of OpenGL.* To the extent that Mesa utilizes the OpenGL command
syntax or state machine, it is being used with authorization from
Silicon Graphics, Inc.(SGI). However, the author does not possess an
OpenGL license from SGI, and makes no claim that Mesa is in any way a
compatible replacement for OpenGL or associated with SGI. Those who
want a licensed implementation of OpenGL should contact a licensed
vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It&#39;s
just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: MesaGLw-32bit 7.2 1.5.44 x86_64
=Sum: Mesa Widget library
+Des:
<!-- DT:Rich -->
<p>Widget library for Mesa.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw 7.2 1.5.44 x86_64
=Sum: Mesa Widget library
+Des:
<!-- DT:Rich -->
<p>Widget library for Mesa.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw-devel-32bit 7.2 1.5.44 x86_64
=Sum: Libraries, includes and more to develop MesaGLw applications
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: MesaGLw-devel 7.2 1.5.44 x86_64
=Sum: Libraries, includes and more to develop MesaGLw applications
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: Modules 3.1.6 39.9 x86_64
=Sum: Environment Modules
+Des:
<!-- DT:Rich -->
<p>The Modules package provides for dynamic modification of a user&#39;s
environment with module files.  Each module file contains the information
needed to configure the shell for an application. Once the
package is initialized, the environment can be modified dynamically
on a per-module basis using the module command that interprets
module files. Typically, module files instruct the module command to alter or
set shell environment variables, such as PATH or MANPATH. Module files
may be shared by many users on a system and users may have their own
collection to supplement or replace the shared module files.  The modules
environment is common on SGI/Crays and many workstation farms.
</p>
-Des:
##----------------------------------------
=Pkg: MyODBC-unixODBC 3.51.26r1127 1.25 x86_64
=Sum: ODBC Interface for Communication with MySQL Compiled with UnixODBC
+Des:
<!-- DT:Rich -->
<p>MyODBC is an interface for communication with MySQL. It is one of the most popular ODBC drivers in the open source market, used by many users to access the MySQL functionality.
It is compiled with unixODBC.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-devel 0.7.0.r4359 15.22.49 x86_64
=Sum: Libraries and headers for adding NetworkManager support to applications
+Des:
<!-- DT:Rich -->
<p>This package contains various headers accessing some NetworkManager
functionality from applications.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-kde-devel 0.7r848570 31.16 x86_64
=Sum: KNetworkManager application for use with NetworkManager
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a system tray applet for controlling network connections on systems that use the NetworkManager daemon.
</p><p>
This subpackage contains headers for building plugins for KNetworkManager.
</p>
-Des:
##----------------------------------------
=Pkg: OpenEXR-32bit 1.6.1 83.17.1 x86_64
=Sum: Library to Handle EXR Pictures in 16-Bit Floating-Point Format
+Des:
<!-- DT:Rich -->
<p>OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light &amp; Magic for use in computer imaging applications.
<ul>
<li>exrheader, a utility for dumping header information
</li><li>exrstdattr, a utility for modifying OpenEXR standard attributes
</li><li>exrmaketiled, for generating tiled and rip/mipmapped images
</li><li>exrenvmap, for creating OpenEXR environment maps
</li><li>exrmakepreview, for creating preview images for OpenEXR files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenEXR-devel 1.6.1 83.17.1 x86_64
=Sum: Library to Handle EXR Pictures (16-bit floating-point format)
+Des:
<!-- DT:Rich -->
<p>OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light &amp; Magic for use in computer imaging applications.
</p><p>
The package contains header files.
<ul>
<li>exrdisplay, an application to view .exr files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenIPMI-devel 2.0.16 0.3.29 x86_64
=Sum: OpenIPMI  - Development libraries
+Des:
<!-- DT:Rich -->
<p>These libraries are needed to get full access to the OpenIPMI functions.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org 3.2.0.9 0.2.24 x86_64
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-base 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Base
+Des:
<!-- DT:Rich -->
<p>This module allows you to manage databases, create queries and reports to track and manage your information by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-base-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Base Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org database module API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-bootstrap 3.2.0.9 0.2.29 x86_64
=Sum: OpenOffice.org Build Bootstrap
+Des:
<!-- DT:Rich -->
<p>This packages provides the basic tools and framework for building OpenOffice.org using separate source packages.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-calc 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Calc
+Des:
<!-- DT:Rich -->
<p>This module allows you to perform calculation, analyze information and manage lists in spreadsheets by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-calc-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Calc Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org Calc module API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-components 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Components
+Des:
<!-- DT:Rich -->
<p>This package provides functionality used by all the OpenOffice.org modules.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-components-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Components Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org components modules API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-draw 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Draw
+Des:
<!-- DT:Rich -->
<p>This module allows you to create and edit drawings, flow charts, and logos by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-filters 3.2.0.9 0.2.24 x86_64
=Sum: Import and Export Filters for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package includes some separated OpenOffice.org import and export filters, for example:
<ul>
<li>OOXML
</li><li>PDF
</li><li>T602
</li><li>MS Works
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-filters-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Filters Development
+Des:
<!-- DT:Rich -->
<p>This package allows development based on the OpenOffice.org import and export filters API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-filters-optional 3.2.0.9 0.2.24 x86_64
=Sum: Additional Import and Export Filters for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package includes some additional import and export filters for OpenOffice.org:
<ul>
<li>AportisDoc (Palm)
</li><li>Pocket Excel
</li><li>Pocket Word
</li><li>DocBook
</li><li>XHTML
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-gnome 3.2.0.9 0.2.26 x86_64
=Sum: GNOME Extensions for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains some GNOME extensions for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-impress 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Impress
+Des:
<!-- DT:Rich -->
<p>This module allows you to create and edit presentations for slideshows, meeting and Web pages by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-impress-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Impress Development
+Des:
<!-- DT:Rich -->
<p>This package allows development based on the OpenOffice.org impress API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-kde 3.2.0.9 0.2.26 x86_64
=Sum: KDE Extensions for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This package contains some KDE extensions for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-core 3.2.0.9 0.2.26 x86_64
=Sum: OpenOffice.org Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package provides core libraries used by all OpenOffice.org modules.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-core-devel 3.2.0.9 0.2.26 x86_64
=Sum: OpenOffice.org Core Libraries Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org core libraries API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-extern 3.2.0.9 0.2.27 x86_64
=Sum: OpenOffice.org External Libraries
+Des:
<!-- DT:Rich -->
<p>This packages provides the OpenOffice.org libraries that are built from 3rd party sources. They are used by all OpenOffice.org modules.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-extern-devel 3.2.0.9 0.2.27 x86_64
=Sum: OpenOffice.org External Libraries Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org external libraries API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-gui 3.2.0.9 0.2.26 x86_64
=Sum: OpenOffice.org GUI Libraries
+Des:
<!-- DT:Rich -->
<p>This package provides the basic functionality for the OpenOffice.org user interface.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-libs-gui-devel 3.2.0.9 0.2.26 x86_64
=Sum: OpenOffice.org GUI Libraries Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org graphics user interface libraries API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-mailmerge 3.2.0.9 0.2.26 x86_64
=Sum: Mail Merge Functionality for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This module allows you to create form letters or send E-mail messages to many recipients using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-math 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Math
+Des:
<!-- DT:Rich -->
<p>This module allows you to create and edit scientific formulas and equations by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-mono 3.2.0.9 0.2.27 x86_64
=Sum: Mono UNO Bridge for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Mono/UNO binding allows a Mono application to access the complete
set of APIs exposed by OpenOffice.org via UNO. A trivial example use-case might be a small mono application to create a spreadsheet, populate it with data,
charts, formatting, then save that in Excel format.
</p><p>
Currently the use of Mono for add-ins &amp; scripting inside OO.o itself is
not supported.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-officebean 3.2.0.9 0.2.24 x86_64
=Sum: OfficeBean Java Bean component for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>With the OfficeBean, a developer can easily write Java applications, harnessing the power of OpenOffice.org. It encapsulates a connection to a locally running OpenOffice.org process, and hides the complexity of establishing and maintaining that connection from the developer.
</p><p>
It also allows embedding of OpenOffice.org documents within the Java environment. It provides an interface the developer can use to obtain Java AWT windows into which the backend OpenOffice.org process draws its visual representation. These windows are then plugged into the UI hierarchy of the hosting Java application. The embedded document is controlled from the Java environment, since the OfficeBean allows developers to access the complete OpenOffice.org API from their Java environment giving them full control over the embedded document, its appearance and behavior.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-pyuno 3.2.0.9 0.2.27 x86_64
=Sum: Python UNO Bridge for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>The Python-UNO bridge allows to use the standard OpenOffice.org API from the well known Python scripting language. It can be used to develop UNO components in python, thus python UNO components may be run within the OpenOffice.org process and can be called from Java, C++ or the built in StarBasic scripting language.
You can create and invoke scripts with the office scripting framework (OOo 2.0 and later) with it. For example, it is used for the mail merge functionality.
</p><p>
You can find the more information at http://udk.openoffice.org/python/python-bridge.html
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-testtool 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Test Tool
+Des:
<!-- DT:Rich -->
<p>A Tool needed for automatic testing of OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-ure 3.2.0.9 0.2.27 x86_64
=Sum: OpenOffice.org UNO Runtime Environment
+Des:
<!-- DT:Rich -->
<p>UNO is the basic technology used by OpenOffice.org. It allows to integrate modules written in various programming languages.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-ure-devel 3.2.0.9 0.2.27 x86_64
=Sum: OpenOffice.org URE Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org UNO runtime environment API.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-writer 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Writer and Web
+Des:
<!-- DT:Rich -->
<p>This module allows you to create and edit text and graphics in letters, reports, documents and Web pages by using OpenOffice.org office suite.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-writer-devel 3.2.0.9 0.2.24 x86_64
=Sum: OpenOffice.org Writer Development
+Des:
<!-- DT:Rich -->
<p>This package allows developement based on the OpenOffice.org Writer module API.
</p>
-Des:
##----------------------------------------
=Pkg: PackageKit-devel 0.3.14 2.12.105 x86_64
=Sum: Needed include files and libraries for development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries, configuration files and development tools (with manual pages) needed to compile and link applications using PackageKit.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-devel 0.9 14.34.9 x86_64
=Sum: Development files for PolicyKit
+Des:
<!-- DT:Rich -->
<p>This package contains the development files for PolicyKit.
</p><p>
PolicyKit is a toolkit for defining and handling authorizations. It is used for allowing unprivileged processes to speak to privileged processes.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-gnome-devel 0.9.2 13.7.46 x86_64
=Sum: Headers, libraries and API docs for PolicyKit-gnome
+Des:
<!-- DT:Rich -->
<p>This package provides headers, libraries and API docs for PolicyKit-gnome.
</p>
-Des:
##----------------------------------------
=Pkg: PyGreSQL 3.8.1 2.10 x86_64
=Sum: Python Client Library for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PyGreSQL is a Python module that interfaces to a PostgreSQL database. It embeds the PostgreSQL query library to allow easy use of PostgreSQL features from a Python script.
</p>
-Des:
##----------------------------------------
=Pkg: SDL-32bit 1.2.13 104.32 x86_64
=Sum: Simple DirectMedia Layer Library
+Des:
<!-- DT:Rich -->
<p>This is the &quot;Simple DirectMedia Layer&quot; library. It provides a generic
API for access to audio, keyboard, mouse, and display framebuffer
across multiple platforms.
</p>
-Des:
##----------------------------------------
=Pkg: SDL-devel 1.2.13 104.32 x86_64
=Sum: SDL Library Developer Files
+Des:
<!-- DT:Rich -->
<p>This package contains files needed for development with the
SDL library.
</p>
-Des:
##----------------------------------------
=Pkg: SDL-devel-32bit 1.2.13 104.32 x86_64
=Sum: SDL Library Developer Files
+Des:
<!-- DT:Rich -->
<p>This package contains files needed for development with the
SDL library.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_image 1.2.6 84.32 x86_64
=Sum: Simple DirectMedia Layer--Sample Image Loading Library
+Des:
<!-- DT:Rich -->
<p>This is a simple library to load images of various formats as SDL surfaces.
This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_image-devel 1.2.6 84.32 x86_64
=Sum: Libraries, includes and more to develop SDL_image applications
+Des:
<!-- DT:Rich -->
<p>This is a simple library to load images of various formats as SDL surfaces.
This library supports BMP, PPM, PCX, GIF, JPEG, PNG, and TIFF formats.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_mixer 1.2.8 153.33 x86_64
=Sum: Sample Mixer Library for SDL
+Des:
<!-- DT:Rich -->
<p>A multichannel audio mixer. It supports four channels of 16-bit stereo
audio, plus a single channel of music, mixed by the popular MikMod
MOD, Timidity MIDI, and SMPEG MP3 libraries.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_mixer-devel 1.2.8 153.33 x86_64
=Sum: Sample Mixer Library for SDL - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>A multi-channel audio mixer. It supports 4 channels of 16-bit stereo
audio, plus a single channel of music, mixed by the popular MikMod
MOD, Timidity MIDI, and SMPEG MP3 libraries.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_net 1.2.7 2.21 x86_64
=Sum: Simple DirectMedia Layer--Networking Library
+Des:
<!-- DT:Rich -->
<p>This is a small cross-platform networking library for use with SDL.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_net-devel 1.2.7 2.21 x86_64
=Sum: Simple DirectMedia Layer--Networking Library
+Des:
<!-- DT:Rich -->
<p>This is a small cross-platform networking library for use with SDL.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_ttf 2.0.9 133.32 x86_64
=Sum: Simple DirectMedia Layer--Truetype Library
+Des:
<!-- DT:Rich -->
<p>This is a sample library that allows you to use TrueType fonts in your SDL applications.
</p>
-Des:
##----------------------------------------
=Pkg: SDL_ttf-devel 2.0.9 133.32 x86_64
=Sum: Simple DirectMedia Layer--Truetype Library
+Des:
<!-- DT:Rich -->
<p>This is a sample library that allows you to use TrueType fonts in your SDL applications.
</p>
-Des:
##----------------------------------------
=Pkg: TeX-Guy 1.3.1 97.28 x86_64
=Sum: DVI Interpreter Library and Utilities for Displaying and Printing
+Des:
<!-- DT:Rich -->
<p>The TeX-Guy package contains a device-independent DVI interpreter
library (DVIlib) and a set of device controlling programs for
the X Window System and printers.
</p><p>
<ul>
<li>It is recommended to use &quot;xgdvi&quot;, &quot;spawx11&quot;, or &quot;spawg&quot; as
previewers, because they support antialiasing.
(Other previewers are sample implementations and not as good.)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: TeX-Guy-devel 1.3.1 97.28 x86_64
=Sum: DVI Interpreter Library and Utilities for Displaying and Printing
+Des:
<!-- DT:Rich -->
<p>The TeX-Guy-devel package contains a device-independent DVI interpreter
library (DVIlib) and a set of device controlling programs for
the X Window System and printers.
</p><p>
<ul>
<li>It is recommended to use &quot;xgdvi&quot;, &quot;spawx11&quot;, or &quot;spawg&quot; as
previewers, because they support antialiasing.
(Other previewers are sample implemenation and not as good.)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: TeXmacs 1.0.6.15 1.18 x86_64
=Sum: A Structured WYSIWYG Scientific Text Editor
+Des:
<!-- DT:Rich -->
<p>GNU TeXmacs is a free scientific text editor, inspired
by TeX and GNU Emacs. The editor allows you to write structured documents
via a WYSIWYG (what-you-see-is-what-you-get) and user friendly interface.
New styles can be created by the user. The program implements high-quality
typesetting algorithms and TeX fonts, which help you to produce
professional looking documents.
</p><p>
The high typesetting quality still goes through for automatically
generated formulas, which makes TeXmacs suitable as an interface
for computer algebra systems. TeXmacs also supports the Guile/Scheme
extension language, so that you may customize the interface and
write your own extensions to the editor.
</p><p>
In the future, TeXmacs is planned to evolve towards
a complete scientific office suite, with spreadsheet capabilities,
a technical drawing editor, and a presentation mode.
</p>
-Des:
##----------------------------------------
=Pkg: VFlib3 3.6.14 16.19 x86_64
=Sum: Versatile Font Library
+Des:
<!-- DT:Rich -->
<p>VFlib est une bibliothèque en langage C pour obtenir des polices de caractères ou des images. Différents formats de police sont accessibles à travers une même interface.
</p><p>
Les formats suivants sont supportés :
</p><p>
Polices TeX :       PK, GF, VF, TFM
Polices Omega TeX : OFM (level 0), OVF
Polices X Window :  PCF, BDF
Autre polices :     TrueType, Type 1, HBF, Syotai Club, JG, ekanji
</p>
-Des:
##----------------------------------------
=Pkg: VFlib3-devel 3.6.14 16.19 x86_64
=Sum: Bibliothèque de développement pour VFlib3
+Des:
<!-- DT:Rich -->
<p>Bibliothèque de développement pour VFlib3
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker 0.92.0 204.17 x86_64
=Sum: A Colorful and Flexible Window Manager
+Des:
<!-- DT:Rich -->
<p>Window Maker is a colorful and flexible window manager and thedesignnated successor of AfterStep.
nFor more details, check http://www.windowmaker.org.
</p>
-Des:
##----------------------------------------
=Pkg: WindowMaker-devel 0.92.0 204.17 x86_64
=Sum: Includes and static libraries for Window Maker
+Des:
<!-- DT:Rich -->
<p>Includes and static libraries for Window Maker
</p>
-Des:
##----------------------------------------
=Pkg: Xalan-c 1.10.0 8.15 x86_64
=Sum: An XSLT Transformation Engine in C++
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSL processor for transforming XML documents
into HTML, text, or other XML document types. Xalan-C++ represents an
almost complete and robust C++ reference implementation of the W3C
Recommendations for XSL Transformations (XSLT) and the XML Path
Language (XPath).
</p>
-Des:
##----------------------------------------
=Pkg: Xerces-c 2.8.0 29.17.1 x86_64
=Sum: A Validating XML Parser
+Des:
<!-- DT:Rich -->
<p>Xerces-C is a validating XML parser written in a portable subset of
C++. Xerces-C makes it easy to give your application the ability to
read and write XML data. A shared library is provided for parsing,
generating, manipulating, and validating XML documents. Xerces-C is
faithful to the XML 1.0 recommendation and associated standards ( DOM
1.0, DOM 2.0. SAX 1.0, SAX 2.0, Namespaces).
</p>
-Des:
##----------------------------------------
=Pkg: a2ps-devel 4.13 1326.33 x86_64
=Sum: Library and header file for the interface of a2ps
+Des:
<!-- DT:Rich -->
<p>a2ps converts ASCII text into PostScript. This feature is used by
apsfilter, for example, to pretty-print ASCII text.
</p><p>
Warning: a2ps is not able to convert complex unicode (UTF-8)
text to PostScript.  Only language text which can be converted
from UTF-8 to latin encodings are supported.
</p>
-Des:
##----------------------------------------
=Pkg: aalib 1.4.0 475.17 x86_64
=Sum: An ASCII Art Library
+Des:
<!-- DT:Rich -->
<p>AA-lib is a low level gfx library.
AA-lib does not require a graphics device. In
fact, there is no graphical output possible. AA-lib replaces
old-fashioned output methods with a powerful ASCII art renderer.
</p>
-Des:
##----------------------------------------
=Pkg: aalib-32bit 1.4.0 475.17 x86_64
=Sum: An ASCII Art Library
+Des:
<!-- DT:Rich -->
<p>AA-lib is a low level gfx library.
AA-lib does not require a graphics device. In
fact, there is no graphical output possible. AA-lib replaces
old-fashioned output methods with a powerful ASCII art renderer.
</p>
-Des:
##----------------------------------------
=Pkg: aalib-devel 1.4.0 475.17 x86_64
=Sum: Development Package for AAlib
+Des:
<!-- DT:Rich -->
<p>Files needed for developing software that uses AAlib.
</p>
-Des:
##----------------------------------------
=Pkg: aalib-devel-32bit 1.4.0 475.17 x86_64
=Sum: Development Package for AAlib
+Des:
<!-- DT:Rich -->
<p>Files needed for developing software that uses AAlib.
</p>
-Des:
##----------------------------------------
=Pkg: akonadi-runtime 1.2.1 1.1.87 x86_64
=Sum: PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the data files of Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-devel 1.0.18 16.9.29 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-tools 1.0.18 1.27 x86_64
=Sum: Divers outils ALSA
+Des:
<!-- DT:Rich -->
<p>Various tools for ALSA including DSP loaders.
</p>
-Des:
##----------------------------------------
=Pkg: alsa-tools-devel 1.0.18 1.27 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: anthy-32bit 9100 166.31 x86_64
=Sum: Kana-Kanji Conversion Engine
+Des:
<!-- DT:Rich -->
<p>Anthy (previously called &#39;Ancy&#39;):
</p><p>
Canna, FreeWnn, and others are famous Kana-Kanji conversion engines
usable for Unix on PCs. They were originally developed for
Japanese Unix workstations around 1990 and development has
practically stopped.  Therefore, the Heke Project is writing a free
conversion engine from scratch (apart from the dictionary, which is
developed outside of the Heke Project).
</p>
-Des:
##----------------------------------------
=Pkg: anthy-devel 9100 166.31 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: apache2 2.2.10 2.24.5 x86_64
=Sum: Le serveur web Apache Version 2.0
+Des:
<!-- DT:Rich -->
<p>Apache 2, the successor to Apache 1.
</p><p>
Apache is the most used Web server software worldwide.
</p><p>
Some new features in Apache 2:<ul>
<li>hybrid multiprocess, multithreaded mode for improved scalability
</li><li>multiprotocol support
</li><li>stream filtering
</li><li>IPv6 support
</li><li>new module API
</li></ul>
New modules include:<ul>
<li>mod_auth_db
</li><li>mod_auth_digest
</li><li>mod_charset_lite
</li><li>mod_dav
</li><li>mod_file_cache
</li></ul>
Mod_ssl is no longer a separate package, but is now included in the Apache
distribution.
</p><p>
See /usr/share/doc/packages/apache2/, http://httpd.apache.org/,
and http://httpd.apache.org/docs-2.0/upgrading.html.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-devel 2.2.10 2.24.5 x86_64
=Sum: Apache 2.0 Header and Include Files
+Des:
<!-- DT:Rich -->
<p>This package contains header files and include files that are needed for
development using the Apache API.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-doc 2.2.10 2.24.5 x86_64
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package&#39;s base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-example-pages 2.2.10 2.24.5 x86_64
=Sum: Pages d'exemple pour le serveur web Apache 2
+Des:
<!-- DT:Rich -->
<p></p><p>
Some Example pages for Apache that show information about the
installed server.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_apparmor 2.0.2 168.23 x86_64
=Sum: Module AppArmor pour apache2
+Des:
<!-- DT:Rich -->
<p>apache2-modapparmor adds support to apache2 to provide AppArmor confinement
to individual cgi scripts handled by apache modules like mod_php and
mod_perl.
</p><p>
This package is part of a suite of tools that used to be named SubDomain.
</p><p>
The documentation is in the apparmor-admin_en package.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_auth_ntlm_winbind 0.0.0.lorikeet_svn_682 1.18 x86_64
=Sum: Enables Apache to authenticate users against Microsoft like DCs
+Des:
<!-- DT:Rich -->
<p>mod_auth_ntlm_winbind is an Apache module to authenticate users and authorize access through Samba&#39;s winbind daemon against a Microsoft like DomainController (DC). These are Microsoft NT/2000/XP and Samba.
</p><p>
To load the module into Apache, run the command &quot;a2enmod
auth_ntlm_winbind&quot; as root.
</p><p>
Check /usr/share/doc/packages/apache2-mod_auth_ntlm_winbind/README for examples how to add mod_auth_ntlm_winbind to your Apache configuration.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_fcgid 2.2 31.17 x86_64
=Sum: Alternative FastCGI module for Apache2
+Des:
<!-- DT:Rich -->
<p>What is mod_fcgid? It is a binary compatibility alternative to Apache module
mod_fastcgi.
</p><p>
mod_fcgid has a new process management strategy, which concentrates on reducing
the number of fastcgi server, and kick out the corrupt fastcgi server as soon
as possible.
</p><p>
To load the module into Apache, run the command &quot;a2enmod fcgid&quot; as root.
</p><p>
See /etc/apache2/conf.d/mod_fcgid.conf and
/usr/share/doc/packages/apache2-mod_fcgid for configuration.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_jk 1.2.26 1.30.1 x86_64
=Sum: Connectors between Apache and Tomcat Servlet Container
+Des:
<!-- DT:Rich -->
<p>This package provides modules for Apache to invisibly integrate Tomcat capabilities into an existing Apache installation.
</p><p>
To load the module into Apache, run the command &quot;a2enmod jk&quot; as root.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_macro 1.1.8 193.18 x86_64
=Sum: Define and Use Macros within the Apache Configuration
+Des:
<!-- DT:Rich -->
<p>mod_macro is a third-party module for the Apache HTTP Server.  It is distributed
with a BSD-style license similar to Apache. It allows the definition and use
of macros within Apache runtime configuration files.
</p><p>
To load the module into Apache, run the command &quot;a2enmod macro&quot; as root.
</p><p>
To learn about the configuration, refer to
/usr/share/doc/packages/apache2-mod_macro/mod_macro.html
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_mono 2.0 1.26 x86_64
=Sum: Run ASP.NET Pages on Unix with Apache and Mono
+Des:
<!-- DT:Rich -->
<p>mod_mono is a module that interfaces Apache with Mono and allows running ASP.NET pages on Unix and Unix-like systems.
To load the module into Apache, run the command &quot;a2enmod mono&quot; as root.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_perl 2.0.4 40.19 x86_64
=Sum: Perl embarqué pour Apache
+Des:
<!-- DT:Rich -->
<p>The Apache/Perl integration project brings together the full power of
the Perl programming language and the Apache HTTP server.
</p><p>
With mod_perl, it is possible to write Apache modules entirely in
Perl. The persistent interpreter embedded in the server
avoids the overhead of starting an external interpreter and the
penalty of Perl start-up time.
</p><p>
Note that you do not need mod_perl to run perl scripts via the common gateway
interface (CGI). mod_perl enables you to run Perl scripts in an embedded
interpreter if the additional performance is needed, but may require
modifications to the scripts.
</p><p>
Usage:
</p><p>
To load the module into Apache, run the command &quot;a2enmod perl&quot; as root.
</p><p>
To learn about the configuration, the best reference unequivocally is
http://perl.apache.org/docs/
</p><p>
For porting 1.0 applications to 2.0, the page
http://perl.apache.org/docs/2.0/user/porting/compat.html should give the
required information.
</p><p>
Most mod_perl handlers use the perl-script handler. Scripts can run in
&quot;mod_perl mode&quot; (preconfigured for URLs starting with /perl/) or &quot;perl cgi
mode&quot; (preconfigured for URLs starting /cgi-perl). Plain CGI scripts can be run
via /cgi-bin/. In all these cases, the script would be placed inside the
/srv/www/cgi-bin/ directory. Refer to /etc/apache2/conf.d/mod_perl.conf about
this configuration.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_perl-devel 2.0.4 40.19 x86_64
=Sum: Perl embarqué pour Apache - Paquet de développement
+Des:
<!-- DT:Rich -->
<p>The Apache/Perl integration project brings together the full power of
the Perl programming language and the Apache HTTP server.
</p><p>
This package contains the include files useful for developing new software depending on apache2-mod_perl.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_php5 5.2.6 50.24.1 x86_64
=Sum: Module PHP5 pour Apache 2.0
+Des:
<!-- DT:Rich -->
<p>PHP is a server-side, cross-platform HTML embedded scripting
language. If you are completely new to PHP and want to get some idea
of how it works, have a look at the Introductory tutorial. Once you
get beyond that, have a look at the example archive sites and some of
the other resources available in the links section.
</p><p>
Please refer to /usr/share/doc/packages/php5/README.SUSE for
information on how to load the module into the Apache webserver.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_python 3.3.1 147.19 x86_64
=Sum: A Python Module for the Apache 2 Web Server
+Des:
<!-- DT:Rich -->
<p>mod_python allows embedding Python within the Apache HTTP server for a
considerable boost in performance and added flexibility in designing
Web-based applications.
</p><p>
</p><p>
Apache processes requests in stages (for example: read the request, parse
headers, check access, and so on). These stages can be implemented by
functions called handlers. Traditionally, handlers are written in C
and compiled into Apache modules. mod_python provides a way to extend
Apache functionality by writing Apache handlers in Python. For a
detailed description of the Apache request processing process, see the
Apache API notes.
</p><p>
</p><p>
For most programmers, the request and the authentication handlers
provide everything required. To ease migration from CGI and Httpdapy,
two handlers are provided that simulate these environments, allowing a
user to run scripts under mod_python with (for the most part) no
changes to the code.
</p><p>
</p><p>
mod_python originated from a project called Httpdapy. For a long time,
Httpdapy was not called mod_python because Httpdapy was not meant to
be Apache-specific. Httpdapy was designed to be cross-platform and
was initially written for the Netscape server.
</p><p>
</p><p>
Usage Hints:
</p><p>
To load mod_python into Apache, run the command &quot;a2enmod python&quot; as
root.
The configuration is described in
/usr/share/doc/packages/apache2-mod_python/doc-html/index.html.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_scgi 1.12 1.19 x86_64
=Sum: Apache module named mod_scgi that implements the client side of the protocol.
+Des:
<!-- DT:Rich -->
<p>The SCGI protocol is a replacement for the Common Gateway Interface (CGI)
protocol. It is a standard for applications to interface with HTTP servers.
It is similar to FastCGI but is designed to be easier to implement.
</p><p>
This package contains the apache2 module.
</p><p>
To load mod_python into Apache, run the command &quot;a2enmod scgi&quot; as root.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_security2 2.5.6 2.10.1 x86_64
=Sum: ModSecurity Open Source Web Application Firewall
+Des:
<!-- DT:Rich -->
<p>ModSecurity(TM) is an open source intrusion detection and
prevention engine for web applications (or a web application
firewall). Operating as an Apache Web server module or
standalone, the purpose of ModSecurity is to increase web
application security, protecting web applications from known
and unknown attacks.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-mod_tidy 0.5.5 32.18 x86_64
=Sum: Apache Module using the Tidy Library to Clean Up HTML, XHTML, and XML
+Des:
<!-- DT:Rich -->
<p>mod_tidy is a module for Apache that works as a filter that hooks
itself to HTML output.  mod_tidy feeds the HTML output to TidyLib
(http://tidy.sourceforge.net/), which validates the HTML output.  If
TidyLib finds an error, the client receives a HTML page with a list of
all found errors. If TidyLib does not complain, you get your HTML
data as without mod_tidy.
</p><p>
To load the module into Apache, run the command &quot;a2enmod tidy&quot; as root.
</p><p>
To learn about the configuration, refer to
/usr/share/doc/packages/apache2-mod_tidy/README.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-prefork 2.2.10 2.24.5 x86_64
=Sum: Apache 2 "prefork" MPM (Multi-Processing Module)
+Des:
<!-- DT:Rich -->
<p>&quot;prefork&quot; MPM (Multi-Processing Module)
</p><p>
This MPM is basically the one that Apache 1.3.x used. It warrants the maximum
stability because each server runs in its own process. If a process dies it
will not affect other servers.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-utils 2.2.10 2.24.5 x86_64
=Sum: Utilitaires pour Apache 2
+Des:
<!-- DT:Rich -->
<p>Utilities provided by the Apache 2 Web Server project which are useful to administrators of web servers in general.
</p>
-Des:
##----------------------------------------
=Pkg: apache2-worker 2.2.10 2.24.5 x86_64
=Sum: Apache 2 worker MPM (Multi-Processing Module)
+Des:
<!-- DT:Rich -->
<p>The worker MPM (multi-Processing Module) implementing a hybrid multi-threaded
multi-process web server.
</p><p>
This combination offers a performance boost and retains some of the stability
of the multi-process model.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import and Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic online banking interface. It allows multiple back-ends (currently HBCI) and multiple front-ends (such as KDE, GNOME, or console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking-devel 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import/Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic OnlineBanking interface. It allows multiple backends (currently HBCI) and multiple frontends  (e.g. KDE, GNOME, console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: aqbanking-lang 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import and Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic online banking interface. It allows multiple back-ends (currently HBCI) and multiple front-ends (such as KDE, GNOME, or console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: arpwatch-ethercodes-build 2.1a15 131.21 x86_64
=Sum: Tool to create ethercodes.dat from IEEE.org meta data
+Des:
<!-- DT:Rich -->
<p>Tool and required files to create the ethercodes.dat file from the
OUI and company ID data as provided by IEEE.org.  This package is only
needed if you want to build the arpwatch-ethercodes package.
</p>
-Des:
##----------------------------------------
=Pkg: art-sharp2 2.24.0 14.41 x86_64
=Sum: Mono bindings for libart
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for libart.
</p>
-Des:
##----------------------------------------
=Pkg: arts 1.5.10 13.26 x86_64
=Sum: Modular Software Synthesizer
+Des:
<!-- DT:Rich -->
<p>A modular software synthesizer that generates realtime audio streams, includes midi support, is easily extendable, and uses CORBA for separation of GUI and synthesis.
</p>
-Des:
##----------------------------------------
=Pkg: arts-32bit 1.5.10 13.26 x86_64
=Sum: Modular Software Synthesizer
+Des:
<!-- DT:Rich -->
<p>A modular software synthesizer that generates realtime audio streams, includes midi support, is easily extendable, and uses CORBA for separation of GUI and synthesis.
</p>
-Des:
##----------------------------------------
=Pkg: arts-devel 1.5.10 13.26 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>A modular software synthesizer that generates realtime audio streams, supports MIDI, is easily extendable, and uses CORBA for separation of the GUI and synthesis.
</p>
-Des:
##----------------------------------------
=Pkg: ash 1.6.1 45.8 x86_64
=Sum: Le shell Ash
+Des:
<!-- DT:Rich -->
<p>NetBSD&#39;s ash (Almquist sh) for Linux is a small (62K--no job control)
Bourne-compatible shell. It is great for machines with
low memory, but does not provide all the extras of shells like bash,
tcsh, and zsh. Most shell scripts are compatible with bash. Note
that most scripts written for Linux use some bash-specific syntax.
The Slackware setup scripts are a notable exception, because ash is the
shell used during installation.
</p>
-Des:
##----------------------------------------
=Pkg: aspell-devel 0.60.6 26.22 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi-32bit 1.28.1 0.1.161 x86_64
=Sum: Assistive Technology Service Provider Interface
+Des:
<!-- DT:Rich -->
<p>This library, based on ATK, is a general interface for applications to make use of the accessibility toolkit.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi-devel 1.28.1 0.1.161 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: atk-devel 1.28.0 1.2.28 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: atk-doc 1.28.0 1.2.28 x86_64
=Sum: Additional Package Documentation for atk
+Des:
<!-- DT:Rich -->
<p>This package contains additional documentation for the ATK Library.
</p>
-Des:
##----------------------------------------
=Pkg: audiofile-devel 0.2.6 142.11.42 x86_64
=Sum: Une bibliothèque de fichiers audio
+Des:
<!-- DT:Rich -->
<p>This Audio File Library is an implementation of the SGI Audio File library.
At present, not all features of the SGI Audio File library are
implemented.
</p><p>
</p><p>
This library allows the processing of audio data to and from audio
files of many common formats (currently AIFF, AIFC, WAVE, and
NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audit-devel 1.7.7 5.16 x86_64
=Sum: Fichiers d'en-tête et bibliothèque statique pour libaudit
+Des:
<!-- DT:Rich -->
<p>The audit-devel package contains the static libraries and header
files needed for developing applications that need to use the audit
framework libraries.
</p>
-Des:
##----------------------------------------
=Pkg: audit-libs-python 1.7.7 5.25 x86_64
=Sum: Python Bindings for libaudit
+Des:
<!-- DT:Rich -->
<p>The audit-libs-python package contains the bindings for using libaudit by python.
</p>
-Des:
##----------------------------------------
=Pkg: autoconf 2.63 1.158 x86_64
=Sum: A GNU Tool for Automatically Configuring Source Code
+Des:
<!-- DT:Rich -->
<p>GNU Autoconf is a tool for configuring source code and makefiles. Using autoconf, programmers can create portable and configurable packages, because the person building the package is allowed to specify various configuration options.
</p><p>
You should install autoconf if you are developing software and would like to create shell scripts to configure your source code packages.
</p><p>
Note that the autoconf package is not required for the end user who may be configuring software with an autoconf-generated script; autoconf is only required for the generation of the scripts, not their use.
</p>
-Des:
##----------------------------------------
=Pkg: automake 1.10.1 4.129 x86_64
=Sum: A Program for Automatically Generating GNU-Style Makefile.in Files
+Des:
<!-- DT:Rich -->
<p>Automake is a tool for automatically generating &quot;Makefile.in&quot; files from
&quot;Makefile.am&quot; files.  &quot;Makefile.am&quot; is a series of &quot;make&quot; macro definitions (with rules occasionally thrown in).  The generated &quot;Makefile.in&quot; files are compatible with the GNU Makefile standards.
</p>
-Des:
##----------------------------------------
=Pkg: automoc4 0.9.88 1.1.95 x86_64
=Sum: CMake automatic MOC Generation
+Des:
<!-- DT:Rich -->
<p>automoc4 is a tool to add rules for generating Qt moc files automatically to projects that use CMake as the buildsystem.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-compat-howl-devel 0.6.23 11.19.22 x86_64
=Sum: howl Compatibility Package for D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>howl compatibility layer for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-compat-mDNSResponder-devel 0.6.23 11.19.22 x86_64
=Sum: mDNSResponder Compatibility Package for D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>Apple mDNSResponder compatibility layer for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-mono 0.6.23 11.19.36 x86_64
=Sum: Mono Bindings for avahi, the D-BUS Service for Zeroconf and Bonjour
+Des:
<!-- DT:Rich -->
<p>This package provides Mono bindings for avahi.
Avahi is an implementation of the DNS Service Discovery and MulticastDNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
The Avahi mDNS responder is now feature complete, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: babl-0_0 0.0.22 4.22 x86_64
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: babl-devel 0.0.22 4.22 x86_64
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1 1.5.1 0.15.5 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-engine-gstreamer 1.5.1 0.15.5 x86_64
=Sum: Support du moteur GStreamer pour Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides the playback engine used by Banshee, built on the GStreamer multimedia framework.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-platform-gnome 1.5.1 0.15.5 x86_64
=Sum: Support de la plateforme GNOME pour Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides platform integration with the GNOME Desktop for Banshee. Most notably it provides a configuration backend to GConf, so all user settings can be stored there. Other GNOME specific integration hooks are provided as well.
</p><p>
Users running Banshee on GNOME are recommended to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-backend-platform-unix 1.5.1 0.15.5 x86_64
=Sum: UNIX platform support for Banshee
+Des:
<!-- DT:Rich -->
<p>This package provides many optimizations for UNIX based platforms. In particular, it provides a POSIX IO layer that performs better than the default System.IO/.NET IO layer provided in the base banshee-1 package.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-devel 1.5.1 0.15.5 x86_64
=Sum: Development package for Banshee
+Des:
<!-- DT:Rich -->
<p>Users who wish to extend Banshee should install this package. It includes standard Linux development files and other tools for building extensions and applications on top of the Banshee core application framework.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-extensions-default 1.5.1 0.15.5 x86_64
=Sum: Extra features extending the Banshee Media Player
+Des:
<!-- DT:Rich -->
<p>This package provides a number of useful features for Banshee, including a Play Queue, Last.fm streaming, Last.fm Audioscrobbling, and Multimedia Key support. This package is highly recommended as it greatly enhances the end user experience of Banshee.
</p><p>
Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: banshee-1-lang 1.5.1 0.15.5 x86_64
=Sum: A music playback and management application
+Des:
<!-- DT:Rich -->
<p>Import, organize, and discover new music with Banshee through its simple and powerful interface and wide array of innovative features. Create your own radio stations or listen to a friends&#39; through Last.fm integration; experience automatic cover art fetching as you listen; and easily browse, search, and control your media collection.
</p>
-Des:
##----------------------------------------
=Pkg: bdfresize 1.5 416.8 x86_64
=Sum: Outil pour redimensionner les polices au format BDF
+Des:
<!-- DT:Rich -->
<p>bdfresize est une commande pour agrandir ou rétrécir les fontes
au format standard BDF .
</p>
-Des:
##----------------------------------------
=Pkg: beagle 0.3.8 56.25.6 x86_64
=Sum: Outil de recherche 
+Des:
<!-- DT:Rich -->
<p>Beagle est un outil de recherche qui analyse votre espace d&#39;information personnel pour trouver tout ce que vous pourriez rechercher. Beagle est un service de recherche pour Linux indépendant du bureau qui indexe vos données en temps réel de manière transparente.
</p><p>
Beagle supporte différentes sources de données et différents formats de fichiers, incluant :<ul>
<li>documents
</li><li>courriels
</li><li>historique de navigation internet
</li><li>conversations de messagerie instantanée 
</li><li>nouvelles RSS
</li><li>images
</li><li>vidéos
</li><li>fichiers de musique
</li><li>archives et leur contenu
</li><li>applications
</li><li>... et plus encore.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-devel 0.3.8 56.25.6 x86_64
=Sum: Outil de recherche 
+Des:
<!-- DT:Rich -->
<p>Beagle est un outil de recherche qui analyse votre espace d&#39;information personnel pour trouver tout ce que vous pourriez rechercher. Beagle est un service de recherche pour Linux indépendant du bureau qui indexe vos données en temps réel de manière transparente.
</p><p>
Beagle supporte différentes sources de données et différents formats de fichiers, incluant :<ul>
<li>documents
</li><li>courriels
</li><li>historique de navigation internet
</li><li>conversations de messagerie instantanée 
</li><li>nouvelles RSS
</li><li>images
</li><li>vidéos
</li><li>fichiers de musique
</li><li>archives et leur contenu
</li><li>applications
</li><li>... et plus encore.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: beagle-lang 0.3.8 56.25.6 x86_64
=Sum: Outil de recherche 
+Des:
<!-- DT:Rich -->
<p>Beagle est un outil de recherche qui analyse votre espace d&#39;information personnel pour trouver tout ce que vous pourriez rechercher. Beagle est un service de recherche pour Linux indépendant du bureau qui indexe vos données en temps réel de manière transparente.
</p><p>
Beagle supporte différentes sources de données et différents formats de fichiers, incluant :<ul>
<li>documents
</li><li>courriels
</li><li>historique de navigation internet
</li><li>conversations de messagerie instantanée 
</li><li>nouvelles RSS
</li><li>images
</li><li>vidéos
</li><li>fichiers de musique
</li><li>archives et leur contenu
</li><li>applications
</li><li>... et plus encore.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: bin86 0.16.17 59.15 x86_64
=Sum: Un assembleur et un éditeur de liens 8086
+Des:
<!-- DT:Rich -->
<p>Un assembleur et un éditeur de lien pour 8086
</p>
-Des:
##----------------------------------------
=Pkg: bind-devel 9.5.0P2 20.7.1 x86_64
=Sum: Bibliothèques de développement et fichiers d'entête pour BIND
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les fichiers d&#39;entête, les bibliothèques et la documentation pour élaborer des programmes utilisant les bibliothèques DNS de BIND.
</p>
-Des:
##----------------------------------------
=Pkg: binutils-devel 2.20.0 0.7.9 x86_64
=Sum: GNU binutils (fichiers de développement BFD)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les fichiers d&#39;entête et les bibliothèques statiques nécessaires pour compiler
des programmes utilisant la bibliothèque GNU BFD, qui fait partie de binutils.
</p>
-Des:
##----------------------------------------
=Pkg: binutils-devel-32bit 2.20.0 0.7.9 x86_64
=Sum: GNU binutils (fichiers de développement BFD)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les fichiers d&#39;entête et les bibliothèques statiques nécessaires pour compiler
des programmes utilisant la bibliothèque GNU BFD, qui fait partie de binutils.
</p>
-Des:
##----------------------------------------
=Pkg: binutils-gold 2.20.0 0.7.9 x86_64
=Sum: The gold linker
+Des:
<!-- DT:Rich -->
<p>gold is an ELF linker.  It is intended to have complete support for
ELF and to run as fast as possible on modern systems.  For normal use
it is a drop-in replacement for the older GNU linker.
</p><p>
The existing GNU linker manual is intended to be accurate
documentation for features which gold supports.  gold supports most of
the features of the GNU linker for ELF targets.  Notable
omissions--features of the GNU linker not currently supported in
gold--are:<ul>
<li>MEMORY regions in linker scripts
</li><li>MRI compatible linker scripts
</li><li>linker map files (-M, -Map)
</li><li>cross-reference reports (--cref)
</li><li>linker garbage collection (--gc-sections)
</li><li>position independent executables (-pie)
</li><li>various other minor options
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: bison 2.3 127.112 x86_64
=Sum: Générateur d'analyseurs syntaxiques GNU
+Des:
<!-- DT:Rich -->
<p>Bison est un générateur d&#39;analyseurs syntaxiques du même style que yacc(1).
</p>
-Des:
##----------------------------------------
=Pkg: bison-32bit 2.3 127.112 x86_64
=Sum: Générateur d'analyseurs syntaxiques GNU
+Des:
<!-- DT:Rich -->
<p>Bison est un générateur d&#39;analyseurs syntaxiques du même style que yacc(1).
</p>
-Des:
##----------------------------------------
=Pkg: blas 3.1.1 64.21 x86_64
=Sum: BLAS (Bibliothèque de sous-programmes d'algèbre linéaire)
+Des:
<!-- DT:Rich -->
<p>Les routines BLAS (``Basic Linear Algebra Subprograms&#39;&#39;) forment une bibliothèque standard pour l&#39;algèbre linéaire. BLAS fournit un ensemble d&#39;algorithmes de base. BLAS est rapide et très bien testé, a été écrit en FORTRAN 77 et compilé avec gfortran. La documentation est disponible dans le paquet blas-man.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-devel 4.51 1.1.97 x86_64
=Sum: Files needed for BlueZ development
+Des:
<!-- DT:Rich -->
<p>Files needed to develop applications for the BlueZ Bluetooth protocol stack.
</p>
-Des:
##----------------------------------------
=Pkg: bluez-hcidump 1.42 19.2.35 x86_64
=Sum: HCI Dumper for Debugging Bluetooth Connections
+Des:
<!-- DT:Rich -->
<p>An HCI dumper for debugging Bluetooth connections for BlueZ.
</p>
-Des:
##----------------------------------------
=Pkg: boinc-client 6.2.18 4.24 x86_64
=Sum: The Berkeley Open Infrastructure for Network Computing (BOINC)
+Des:
<!-- DT:Rich -->
<p>The Berkeley Open Infrastructure for Network Computing (BOINC) is an
open-source software platform which supports distributed computing,
primarily in the form of &quot;volunteer&quot; computing and &quot;desktop Grid&quot; computing.
It is well suited for problems which are often described as &quot;trivially
parallel&quot;.
</p><p>
BOINC is the underlying software used by projects such as SETI@home,
Einstein@Home, ClimatePrediciton.net, the World Community Grid, and many
other distributed computing projects.
</p>
-Des:
##----------------------------------------
=Pkg: boinc-client-devel 6.2.18 4.24 x86_64
=Sum: The Berkeley Open Infrastructure for Network Computing (BOINC)
+Des:
<!-- DT:Rich -->
<p>The Berkeley Open Infrastructure for Network Computing (BOINC) is an
open-source software platform which supports distributed computing,
primarily in the form of &quot;volunteer&quot; computing and &quot;desktop Grid&quot; computing.
It is well suited for problems which are often described as &quot;trivially
parallel&quot;.
</p><p>
BOINC is the underlying software used by projects such as SETI@home,
Einstein@Home, ClimatePrediciton.net, the World Community Grid, and many
other distributed computing projects.
</p>
-Des:
##----------------------------------------
=Pkg: boost-devel 1.36.0 11.17 x86_64
=Sum: Paquetage de développement pour Boost C++
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient tout le nécessaire pour développer et compiler des applications qui utilisent les bibliothèques C++ Boost. Pour la documentation, consultez le paquet boost-doc.
</p>
-Des:
##----------------------------------------
=Pkg: boost-doc 1.36.0 11.17 x86_64
=Sum: Documentation des bibliothèques de Boost C++
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient la documentation sur la bibliothèque dynamique boost.
</p>
-Des:
##----------------------------------------
=Pkg: boost-jam 3.1.16 1.21 x86_64
=Sum: Un remplaçant amélioré pour Make
+Des:
<!-- DT:Rich -->
<p>Boost Jam est un outil qui permet d&#39;automatiser la compilation (comme GNU make) basé sur FT Jam, lui même basé sur Perforce Jam. Il contient des améliorations notables faîtes pour faciliter son utilisation dans le Boost Build System mais il reste compatible avec Perforce Jam.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-branding-SLED 3.1 47.22 x86_64
=Sum: Thème bootsplash  NLD par défaut
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le thèmepar défaut de NLD pour l&#39;affichage graphique lors de l&#39;amorçage. Plus d&#39;information sur le site http://www.bootsplash.org/
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-branding-SLES 3.1 47.22 x86_64
=Sum: Thème par défaut pour le démarrage de SuSE Linux Enterprise Server
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le thème SLES pour l&#39;interface graphique de démarrage de SuSE.
Pour plus d&#39;information, veuillez consulter le site http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bug-buddy-32bit 2.28.0 1.2.22 x86_64
=Sum: Outil GNOME de rapport des anomalies
+Des:
<!-- DT:Rich -->
<p>Bug Buddy pour l&#39;environnement GNOME 2.x facilite autant que possible la soumission de rapports d&#39;anomalies. Il peut générer des traces de crash et inclure cette information dans le rapport d&#39;évênement.
</p>
-Des:
##----------------------------------------
=Pkg: bytefx-data-mysql 2.0.1 1.19.1 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: bzr 1.8 1.17 x86_64
=Sum: Système distribué de contrôle des révisions facile d'utilisation.
+Des:
<!-- DT:Rich -->
<p>Bazaar-NG est un outil distribué de contrôle des révisions à la fois puissant, facile et extensible. C&#39;est le successeur de bazzar RCS, qui, lui aussi, était une refonte de GNU Arch plus orientée utilisateur
</p>
-Des:
##----------------------------------------
=Pkg: cairo-devel 1.8.8 2.1.48 x86_64
=Sum: Development environment for cairo
+Des:
<!-- DT:Rich -->
<p>This package contains all files necessary to build binaries using cairo.
</p>
-Des:
##----------------------------------------
=Pkg: cairo-doc 1.8.8 2.1.48 x86_64
=Sum: Documentation for cairo
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation for <a href="pkg://cairo">cairo</a>.
</p>
-Des:
##----------------------------------------
=Pkg: cairomm-devel 1.6.4 2.7 x86_64
=Sum: C++ interface for Cairo
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for Cairo.
</p>
-Des:
##----------------------------------------
=Pkg: canna 3.7p3 201.18 x86_64
=Sum: Kana and Kanji Conversion System
+Des:
<!-- DT:Rich -->
<p>Canna converts Kana to Kanji based on a client/server model.
An application program communicates with a Kana to Kanji conversion
server to achieve Japanese input. Canna can be used in Emacs, X
Window System environments, and on TTYs. Canna provides more than ten tools to
maintain Kana to Kanji conversion dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: canna-devel 3.7p3 201.18 x86_64
=Sum: Libraries of Canna
+Des:
<!-- DT:Rich -->
<p>Canna libraries.
</p>
-Des:
##----------------------------------------
=Pkg: canna-libs 3.7p3 201.18 x86_64
=Sum: Canna Libraries
+Des:
<!-- DT:Rich -->
<p>Canna Libraries
</p>
-Des:
##----------------------------------------
=Pkg: canna-libs-32bit 3.7p3 201.18 x86_64
=Sum: Canna Libraries
+Des:
<!-- DT:Rich -->
<p>Canna Libraries
</p>
-Des:
##----------------------------------------
=Pkg: cannadic 0.95a 2.10 x86_64
=Sum: Extension Dictionary for Canna
+Des:
<!-- DT:Rich -->
<p>This dictionary has been compiled as a supplement to the dictionaries
distributed with Canna3.5b2. It is based on Kana-Kanji conversion
dictionaries distributed under the GPL and Kana-Kanji conversion distributed
without restrictions. While using this dictionary, many missing
words have been successively added. Currently the main dictionary and the
suffix and prefix dictionary together contain about 130,000 words.
</p>
-Des:
##----------------------------------------
=Pkg: capi4linux-devel 2008.12.10 1.26 x86_64
=Sum: CAPI 2.0 library files for development
+Des:
<!-- DT:Rich -->
<p>This package contains the CAPI 2.0 library files needed for development.
</p>
-Des:
##----------------------------------------
=Pkg: ccache 2.4 6.8 x86_64
=Sum: Compiler Cache
+Des:
<!-- DT:Rich -->
<p>Ccache is a compiler cache. It acts as a caching preprocessor to C/C++
compilers, using the -E compiler switch and a hash to detect when
a compilation can be satisfied from cache. This often results in
increased speed for common compilations.
</p>
-Des:
##----------------------------------------
=Pkg: cdk 4.9.13 44.8 x86_64
=Sum: The Runtime for the Curses Development Kit
+Des:
<!-- DT:Rich -->
<p>CDK is a widget set developed on top of the basic curses
library. It contains 21 ready to use widgets, some of which
are: a text entry field, a scrolling list, a selection list,
an alphalist, a pull-down menu, a radio list, a viewer widget,
and a dialog box.
</p>
-Des:
##----------------------------------------
=Pkg: cdk-devel 4.9.13 44.8 x86_64
=Sum: Development Part of Curses Development Kit
+Des:
<!-- DT:Rich -->
<p>This package includes the development headers and static libraries
for CDK, the Curses Development Kit.
</p>
-Des:
##----------------------------------------
=Pkg: cdparanoia-devel 3.10.2 2.1.42 x86_64
=Sum: A Program for Extracting, Verifying, and Fixing Audio Tracks from CDs
+Des:
<!-- DT:Rich -->
<p>This CDDA reader distribution (&#39;cdparanoia&#39;) reads audio from the
CD-ROM directly as data and writes the
data to a file or pipe as .wav, .aifc, or raw 16-bit linear PCM.
</p><p>
This is a beta release. See http://www.xiph.org/paranoia/.
</p>
-Des:
##----------------------------------------
=Pkg: chasen 2.4.2 31.18 x86_64
=Sum: Japanese Morphological Analysis System
+Des:
<!-- DT:Rich -->
<p>Japanese Morphological Analysis System, ChaSen
</p><p>
</p><p>
ChaSen version 1.0 was officially released on 19 February, 1997 by
the Computational Linguistics Laboratory, the Graduate School of Information
Science, and the Nara Institute of Science and Technology (NAIST). It is a
free Japanese Morphological analyser. It grew out of JUMAN
version 2.0 development and has made significant improvements in system
performance.
Origin of Package Name:
</p><p>
</p><p>
Takayama, Nara (where NAIST is situated) is famous for producing a tea
whisk used in traditional Japanese tea ceremonies. The Japanese name for
the tea whisk is &quot;chasen&quot; and that is the reason for giving the name
ChaSen to this package developed in NAIST.
</p>
-Des:
##----------------------------------------
=Pkg: chasen-devel 2.4.2 31.18 x86_64
=Sum: Libraries and header files for ChaSen developers
+Des:
<!-- DT:Rich -->
<p>Libraries and header files for ChaSen developers.
</p>
-Des:
##----------------------------------------
=Pkg: check-devel 0.9.5 63.21 x86_64
=Sum: Unit Test Framework for C
+Des:
<!-- DT:Rich -->
<p>Check is a unit test framework for C. It features a simple interface
for defining unit tests, putting little in the way of the
developer. Tests are run in a separate address space, so Check can
catch both assertion failures and code errors that cause segmentation
faults or other signals. The output from unit tests can be used within
source code editors and IDEs.
</p>
-Des:
##----------------------------------------
=Pkg: chmlib-devel 0.39 101.22 x86_64
=Sum: Documentation and Headers for chmlib
+Des:
<!-- DT:Rich -->
<p>This package contains the headers and documentation for the chmlib API
that programmers will need to develop applications which use chmlib,
the software library for dealing with Microsoft ITSS/CHM format files.
</p>
-Des:
##----------------------------------------
=Pkg: chrpath 0.13 26.8 x86_64
=Sum: Modifies the dynamic library load path (rpath and runpath) of compiled programs and libraries
+Des:
<!-- DT:Rich -->
<p>Chrpath allows you to modify the dynamic library load path (rpath) of
compiled programs. Currently, only removing and modifying the rpath is
supported. It cannot extend or add an rpath.
</p>
-Des:
##----------------------------------------
=Pkg: cloog-devel 0.15.8+ppl 0.2.22 x86_64
=Sum: Development tools for CLOOG
+Des:
<!-- DT:Rich -->
<p>Development tools and headers for the Chunky Loop Generator.
</p>
-Des:
##----------------------------------------
=Pkg: clucene-core-32bit 0.9.21 1.15 x86_64
=Sum: CLucene is a C++ port of Lucene
+Des:
<!-- DT:Rich -->
<p>CLucene is a C++ port of Lucene.
It is a high-performance, full-featured text search engine written in C++.
CLucene is faster than lucene as it is written in C++.
</p>
-Des:
##----------------------------------------
=Pkg: clucene-core-devel 0.9.21 1.15 x86_64
=Sum: CLucene is a C++ port of Lucene
+Des:
<!-- DT:Rich -->
<p>CLucene is a C++ port of Lucene.
It is a high-performance, full-featured text search engine written in C++.
CLucene is faster than lucene as it is written in C++.
</p>
-Des:
##----------------------------------------
=Pkg: clutter-devel 1.0.6 1.1.66 x86_64
=Sum: The clutter library (Development)
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces. This package contain the files for development.
</p>
-Des:
##----------------------------------------
=Pkg: clutter-gtk-devel 0.10.2 2.1.88 x86_64
=Sum: The Clutter library for Gtk (Development)
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces. Gtk+ support. This package contains the development files.
</p>
-Des:
##----------------------------------------
=Pkg: cmake 2.6.2 3.20 x86_64
=Sum: Cross-platform, open-source make system
+Des:
<!-- DT:Rich -->
<p>CMake is a cross-platform, open-source make system
</p>
-Des:
##----------------------------------------
=Pkg: colorblind-devel 0.0.1 1.1.43 x86_64
=Sum: Pixel Filter for colorblind accessibility - Development Files
+Des:
<!-- DT:Rich -->
<p>This library provides an unified way to recalculate colors
in order to present alternative views on images for colorblind
people.
</p>
-Des:
##----------------------------------------
=Pkg: compat-dapl 1.2.14 0.2.40 x86_64
=Sum: Userspace RDMA API (supports DAT 1.2 specification)
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libdat and libdapl provides a userspace
RDMA API that supports DAT 1.2 specification
</p>
-Des:
##----------------------------------------
=Pkg: compat-dapl-32bit 1.2.14 0.2.40 x86_64
=Sum: Userspace RDMA API (supports DAT 1.2 specification)
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libdat and libdapl provides a userspace
RDMA API that supports DAT 1.2 specification
</p>
-Des:
##----------------------------------------
=Pkg: compat-dapl-devel 1.2.14 0.2.40 x86_64
=Sum: Userspace RDMA API (supports DAT 1.2 specification)
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libdat and libdapl provides a userspace
RDMA API that supports DAT 1.2 specification
</p>
-Des:
##----------------------------------------
=Pkg: compat-dapl-devel-32bit 1.2.14 0.2.40 x86_64
=Sum: Userspace RDMA API (supports DAT 1.2 specification)
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libdat and libdapl provides a userspace
RDMA API that supports DAT 1.2 specification
</p>
-Des:
##----------------------------------------
=Pkg: compface 1.5.2 13.8 x86_64
=Sum: 48x48x1 Image Compression and Decompression
+Des:
<!-- DT:Rich -->
<p>The programs compface and uncompface convert 48x48x1 images to and from a compressed format.  The purpose of the programs is to allow the inclusion of face images within mail headers using the field name &quot;X-face:&quot;.  They make use of a library that allows the compression and decompression algorithms to be used in other programs, such as mail dispatchers and mail notification daemons.
</p>
-Des:
##----------------------------------------
=Pkg: compiz 0.7.8 32.42.31 x86_64
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-branding-SLE 0.7.8 32.42.31 x86_64
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-devel 0.7.8 32.42.31 x86_64
=Sum: OpenGL window and compositing manager.
+Des:
<!-- DT:Rich -->
<p>Compiz is an OpenGL compositing manager that use GLX_EXT_texture_from_drawable
for binding redirected top-level windows to texture objects. It has a flexible plug-in system and it is designed to run well on most graphics hardware.
</p>
-Des:
##----------------------------------------
=Pkg: compiz-gnome 0.7.8 32.42.31 x86_64
=Sum: OpenGL window and compositing manager configuration utilities
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les utilitaires de configuration basés sur GNOME pour le gestionnaire composite Compiz.
</p>
-Des:
##----------------------------------------
=Pkg: coolkey-devel 1.1.0 22.24 x86_64
=Sum: CoolKey PKCS #11 PKI Module for Smart Cards
+Des:
<!-- DT:Rich -->
<p>Linux Driver support for the CoolKey and CAC products.
</p><p>
CoolKeys are part of complete PKI solution that provides smart card login, single sign-on, secure messaging, and secure email access. In the complete solution, users are issued CoolKeys by their employer, ISP, bank, or other agency. When the user plugs in the keys for the first time, the keys are automatically provisioned with certificates, keys, and a PIN unique to that user by the Red Hat Certificate System. Once the CoolKey is provisioned, the user can take the key to any system and use it to login (authenticate), send and receive signed and encrypted email, or participate in secure messaging or IRC communication. Using a CoolKey should be as easy as starting a car.
</p><p>
To accomplish that vision we are focusing on building complete support for CoolKey on exactly one token. As the system is built out, we can add token support. CoolKeys are based on JavaCard 1.2. We are testing with Axalto Egate Cyberflex cards, which are available in both smart card and USB Fob form factors.
</p>
-Des:
##----------------------------------------
=Pkg: cpp33 3.3.3 11.9 x86_64
=Sum: The GCC Preprocessor
+Des:
<!-- DT:Rich -->
<p>This Package contains just the preprocessor that is used
by the X11 packages.
</p>
-Des:
##----------------------------------------
=Pkg: cpp45 4.5.0_20100414 1.2.7 x86_64
=Sum: The GCC Preprocessor
+Des:
<!-- DT:Rich -->
<p>This Package contains just the preprocessor that is used
by the X11 packages.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib-devel 2.8.12 56.9.9 x86_64
=Sum: Header files and libraries for developing apps which will use CrackLib
+Des:
<!-- DT:Rich -->
<p>The cracklib-devel package contains the header files and libraries needed
to develop programs that use the CrackLib functions to to determine
whether passwords match certain security-oriented characteristics.
</p>
-Des:
##----------------------------------------
=Pkg: crash 5.0.1 1.5.5 x86_64
=Sum: Crash utility for live systems; netdump, diskdump, LKCD or mcore dumpfiles
+Des:
<!-- DT:Rich -->
<p>The core analysis suite is a self-contained tool that can be used to
investigate either live systems, kernel core dumps created from the
netdump and diskdump packages from Red Hat Linux, the mcore kernel
patch offered by Mission Critical Linux, or the LKCD kernel patch.
</p>
-Des:
##----------------------------------------
=Pkg: crash-devel 5.0.1 1.5.5 x86_64
=Sum: Development files for crash
+Des:
<!-- DT:Rich -->
<p>This files are required to build extensions for crash.
</p><p>
Crash is the core analysis suite that can be used to investigate either live
systems, kernel core dumps created from the netdump and diskdump packages from
Red Hat Linux, the mcore kernel patch offered by Mission Critical Linux, or
the LKCD kernel patch.
</p>
-Des:
##----------------------------------------
=Pkg: cross-ppc-binutils 2.20.0 0.7.8 x86_64
=Sum: GNU binutils for Cross-Development to PowerPC Processors
+Des:
<!-- DT:Rich -->
<p>Cross-development utilities: ar, as, gasp, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, strip.  These utilities are needed whenever you want to compile a program or a kernel.  This package differs from the normal SUSE binutils package in that it is designed to cross-compile from whatever platform SUSE Linux is running on to PowerPC targets. This can be handy even if you are running on a PowerPC development platform, because it decouples the host tools from your embedded tools.
</p>
-Des:
##----------------------------------------
=Pkg: cross-spu-binutils 2.20.0 0.7.8 x86_64
=Sum: GNU binutils for Cross-Development to SPU Processors
+Des:
<!-- DT:Rich -->
<p>Cross-development utilities: ar, as, gasp, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, strip.  These utilities are needed whenever you want to compile a program or a kernel.  This package differs from the normal SUSE binutils package in that it is designed to cross-compile from whatever platform SUSE Linux is running on to SPU targets. This can be handy even if you are running on an SPU development platform, because it decouples the host tools from your embedded tools.
</p>
-Des:
##----------------------------------------
=Pkg: cross-spu-gcc 4.3.4_20091019 0.7.22 x86_64
=Sum: The GNU C Compiler for Cell SPU Processors (shared)
+Des:
<!-- DT:Rich -->
<p>This compiler supports the C language on Cell SPU microprocessors.
</p>
-Des:
##----------------------------------------
=Pkg: cross-spu-gcc-static 4.3.4_20091019 0.7.22 x86_64
=Sum: The GNU C Compiler for Cell SPU Processors (static)
+Des:
<!-- DT:Rich -->
<p>This compiler supports the C language on Cell SPU microprocessors.
</p>
-Des:
##----------------------------------------
=Pkg: cscope 15.6 95.22 x86_64
=Sum: Interactive Tool for Browsing C Source Code
+Des:
<!-- DT:Rich -->
<p>Cscope is an interactive, screen-oriented tool that allows the user to
browse through C source code files for specified elements of code.
</p>
-Des:
##----------------------------------------
=Pkg: ctdb-devel 1.0.105 0.4.5 x86_64
=Sum: Libraries and Header Files to Develop Programs with ctdb support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of ctdb.
</p>
-Des:
##----------------------------------------
=Pkg: cups-devel 1.3.9 8.30.1 x86_64
=Sum: Development Environment for CUPS
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
This is the development package.
</p><p>
http://www.cups.org
</p>
-Des:
##----------------------------------------
=Pkg: cupsddk 1.2.3 65.31 x86_64
=Sum: CUPS Driver Development Kit
+Des:
<!-- DT:Rich -->
<p>The CUPS Driver Development Kit (DDK) provides a suite of
standard drivers, a PPD file compiler, and other utilities that
can be used to develop printer drivers for CUPS and other
printing environments.  CUPS provides a portable printing layer
for UNIX(r)-based operating systems.  The CUPS DDK provides the
means for mass-producing PPD files and drivers or filters for
CUPS-based printer drivers.
</p>
-Des:
##----------------------------------------
=Pkg: cvs-doc 1.12.12 144.21 x86_64
=Sum: Open Source Development with CVS, 2nd Edition Book
+Des:
<!-- DT:Rich -->
<p>The complete Open Source Development with CVS, 2nd Edition book.
</p>
-Des:
##----------------------------------------
=Pkg: cvs2svn 2.0.0 1.17 x86_64
=Sum: Converts CVS repositories to Subversion repositories
+Des:
<!-- DT:Rich -->
<p>Converts CVS repositories to Subversion repositories.
</p><p>
See /usr/share/doc/packages/cvs2svn directory for more information.
</p>
-Des:
##----------------------------------------
=Pkg: cvsps 2.1 163.25 x86_64
=Sum: A Program for Generating Patch Set Information from a CVS Repository
+Des:
<!-- DT:Rich -->
<p>CVSps is a program for generating &#39;patchset&#39; information from a CVS
repository. In this case, a patchset is defined as a set of changes
made to a collection of files, all committed at the same time
(using a single &#39;cvs commit&#39; command). This information is valuable for
seeing the big picture of the evolution of a CVS project. While CVS
tracks revision information, it is often difficult to see what changes
were &#39;atomically&#39; committed to the repository.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-imapd-devel 2.3.11 60.21.1 x86_64
=Sum: Libraries and Includes for Cyrus IMAPd
+Des:
<!-- DT:Rich -->
<p>This package provides the libraries and include files for Cyrus IMAPd.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-devel 2.1.22 182.20.1 x86_64
=Sum: Cyrus SASL API Implementation, Libraries and Header Files
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-devel-32bit 2.1.22 182.20.1 x86_64
=Sum: Cyrus SASL API Implementation, Libraries and Header Files
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl-digestmd5-32bit 2.1.22 182.20.1 x86_64
=Sum: cyrus-sasl plugin for the DIGESTMD5 mechanism
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API implementation. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: dante 1.2.0 0.1.49 x86_64
=Sum: Implémentation libre de Socks v4/v5 - Client
+Des:
<!-- DT:Rich -->
<p>Dante is a free implementation of the following proxy protocols: socks version 4,
socks version 5 (rfc1928), and msproxy. It can be used as a firewall
between networks. It is being developed by Inferno Nettverk A/S, a
Norwegian consulting company. Commercial support is available.
</p><p>
This package contains the dynamic libraries required to make
existing applications become socks clients.
</p>
-Des:
##----------------------------------------
=Pkg: dante-devel 1.2.0 0.1.49 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: dapl 2.0.19 0.2.40 x86_64
=Sum: Une bibliothèque pour permettre l'accès à l'espace-utilisateur des périphèriques RDMA utilisant les APIs DAT d'OS Agnostic.
+Des:
<!-- DT:Rich -->
<p>Along with the OpenFabrics kernel drivers, libdat and libdapl provides a userspace RDMA API that supports DAT 2.0 specification and IB transport extensions for atomic operations and rdma write with immediate data.
</p>
-Des:
##----------------------------------------
=Pkg: dapl-32bit 2.0.19 0.2.40 x86_64
=Sum: Une bibliothèque pour permettre l'accès à l'espace-utilisateur des périphèriques RDMA utilisant les APIs DAT d'OS Agnostic.
+Des:
<!-- DT:Rich -->
<p>Along with the OpenFabrics kernel drivers, libdat and libdapl provides a userspace RDMA API that supports DAT 2.0 specification and IB transport extensions for atomic operations and rdma write with immediate data.
</p>
-Des:
##----------------------------------------
=Pkg: dapl-devel 2.0.19 0.2.40 x86_64
=Sum: Fichiers de développement pour les bibliothèques libdat et libapl.
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for the libdat and libdapl library.
</p>
-Des:
##----------------------------------------
=Pkg: dapl-devel-32bit 2.0.19 0.2.40 x86_64
=Sum: Fichiers de développement pour les bibliothèques libdat et libapl.
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for the libdat and libdapl library.
</p>
-Des:
##----------------------------------------
=Pkg: darts 0.31 1.22 x86_64
=Sum: Double Array Trie System
+Des:
<!-- DT:Rich -->
<p>Darts is a simple C++ template library to construct Double-Arrays
[Aoe 1989]. Double-Arrays are data structures to represent Trie.
These are faster than other Trie implementations.
</p><p>
Darts is used by Chasen.
</p>
-Des:
##----------------------------------------
=Pkg: db1 1.85 225.22 x86_64
=Sum: Bibliothèque de Base de données Berkeley DB - Version 1.85
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 1.85 release.
</p>
-Des:
##----------------------------------------
=Pkg: db1-32bit 1.85 225.22 x86_64
=Sum: Bibliothèque de Base de données Berkeley DB - Version 1.85
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries for the old 1.85 release.
</p>
-Des:
##----------------------------------------
=Pkg: db1-devel 1.85 225.22 x86_64
=Sum: Fichiers et bibliothèques pour l'ancienne bibliothèque de DB Berkley Version 1.85
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the header files, libraries, and documentation for
building programs which need the old Berkeley DB version 1.85. If possible
you should convert your program to work with the new Berkeley DB version.
This version will be removed in a future release.
</p>
-Des:
##----------------------------------------
=Pkg: db43-32bit 4.3.29 125.17 x86_64
=Sum: Bibliothèque de Base de données Berkeley DB
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: db43 4.3.29 125.17 x86_64
=Sum: Bibliothèque de Base de données Berkeley DB
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: db43-devel 4.3.29 125.17 x86_64
=Sum: Fichiers et bibliothèques pour l'ancienne bibliothèque de DB Berkley
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the header files, libraries, and documentation for
building programs which use Berkeley DB.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-devel 1.2.10 3.11.29 x86_64
=Sum: Paquet de développement pour D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus is a message bus system, a simple way for applications to talk to one another. D-Bus supplies both a system daemon and a per-user-login-session daemon. Also, the message bus is built on top of a general one-to-one message passing framework, which can be used by any two apps to communicate directly (without going through the message bus daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-devel-doc 1.2.10 3.11.29 x86_64
=Sum: Documentation pour le développement de D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus is a message bus system, a simple way for applications to talk to one another. D-BUS supplies both a system daemon and a per-user-login-session daemon. Also, the message bus is built on top of a general one-to-one message passing framework, which can be used by any two apps to communicate directly (without going through the message bus daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib-devel 0.76 34.5.49 x86_64
=Sum: Developer package for D-Bus/GLib bindings
+Des:
<!-- DT:Rich -->
<p>D-Bus add-on library to integrate the standard D-Bus library with the GLib
thread abstraction and main loop.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-mono 0.63 188.1.57 x86_64
=Sum: Mono Bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Mono bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-python-devel 0.83.0 27.1.43 x86_64
=Sum: Python bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Developer files for Python bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3-32bit 0.62 223.1.43 x86_64
=Sum: QT3/KDE bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>QT3/KDE bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3-devel 0.62 223.1.43 x86_64
=Sum: Developer package for QT3/KDE bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Developer package for QT3/KDE bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbusxml2qt3 0.8.1 17.25 x86_64
=Sum: Generate Qt3-classes from DBus-introspection data
+Des:
<!-- DT:Rich -->
<p>dbusxml2qt3 allows to generate Qt3-classes from DBus-introspection data
</p>
-Des:
##----------------------------------------
=Pkg: dcraw 1.404 1.21 x86_64
=Sum: Decodeur de photo numérique au format RAW
+Des:
<!-- DT:Rich -->
<p>Outils en ligne de commande pour le décodage et le traitement des photos au format RAW
</p>
-Des:
##----------------------------------------
=Pkg: ddd 3.3.11 265.31 x86_64
=Sum: Debogeur avec interface graphique
+Des:
<!-- DT:Rich -->
<p>The DDD debugger (Data Display Debugger) is a comfortable GUI to the
well-known debuggers GDB and DBX. Data structures can be represented as
graphs and shown interactively. Programs can be debugged in C, C++,
Pascal, MODULA-2, FORTRAN, ADA, and even at the assembler code level.
</p>
-Des:
##----------------------------------------
=Pkg: ddrescue 1.14_0.0.6 1.22 x86_64
=Sum: Copier des données en cas d'erreurs d'E/S .
+Des:
<!-- DT:Rich -->
<p>dd_rescue helps when nothing else can:
your disk has crashed and you try to copy it over to another one.
While standard Unix tools like cp, cat, and dd wail &quot;abort&quot; on every I/O error,
dd_rescue does not.
</p>
-Des:
##----------------------------------------
=Pkg: deb 1.14.21 10.31 x86_64
=Sum: Outil pour les paquets Debian
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les outils pour travailler avec les paquets Debian. Il permet la création et l&#39;extraction de paquets Debian. Si Alien est installé, les paquets peuvent être convertis en RPMS. 
</p><p>
Ce paquet contient les paquets Debian suivants : dpkg, dselect, dpkg-doc, dpkg-dev, et debhelper.
</p>
-Des:
##----------------------------------------
=Pkg: dejagnu 1.4.4 53.76 x86_64
=Sum: Framework for Running Test Suites on Software Tools
+Des:
<!-- DT:Rich -->
<p>DejaGnu is a framework for testing other programs.  Its purpose is to
provide a single front-end for all tests.  Beyond this, DejaGnu offers
several advantages for testing:
<ol>
<li>The flexibility and consistency of the DejaGnu framework make it easy to write tests for any program.

</li><li>DejaGnu provides a layer of abstraction that allows you to write tests that are portable to any host or target where a program must be tested.  For instance, a test for GDB can run (from any Unix-based host) on any target architecture that DejaGnu supports.

</li><li>All tests have the same output format.  This makes it easy to integrate testing into other software development processes. DejaGnu&#39;s output is designed to be parsed by other filtering scripts and it is also human-readable.
</li></ol>
DejaGnu is written in <a href="pkg://expect">expect</a>, which in turn uses &quot;Tcl&quot;--Tool
command language.
</p><p>
Running tests requires two things: the testing framework and the
test suites themselves.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet 2.28.0 1.1.93 x86_64
=Sum: Applet pour barre de bureau pour GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet-devel 2.28.0 1.1.93 x86_64
=Sum: Applet pour barre de bureau pour GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: deskbar-applet-lang 2.28.0 1.1.93 x86_64
=Sum: Applet pour barre de bureau pour GNOME
+Des:
<!-- DT:Rich -->
<p>The goal of DeskbarApplet is to provide an omnipresent versatile search interface. By typing search terms into the deskbar entry in your panel you are presented with the search results as you type.
</p><p>
Seaches are handled by a series of plugins. DeskbarApplet provides a simple interface to manage these plugins to provide you with the search results that fit your needs.
</p>
-Des:
##----------------------------------------
=Pkg: dev86 0.16.17 59.15 x86_64
=Sum: 8086 Development Suite
+Des:
<!-- DT:Rich -->
<p>This package contains tools for generating Elks/8086 programs and the Elksemu for execution
of these programs in Linux.
</p>
-Des:
##----------------------------------------
=Pkg: devhelp 2.28.1 0.1.83 x86_64
=Sum: Developer's Help Program for GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp Features
Devhelp Features<ul>
<li>Full indexing of books in XML
</li><li>HTML viewer (GtkHTML2)
</li><li>Search by function, struct, macro, and more
</li><li>Auto completion
</li><li>Command line search with nice Emacs integration
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: devhelp-devel 2.28.1 0.1.83 x86_64
=Sum: Developer's Help Program For GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp Features
Devhelp Features<ul>
<li>Full indexing of books in XML.
</li><li>HTML viewer (GtkHTML2).
</li><li>Search by function, struct, macro, and more.
</li><li>Auto completion.
</li><li>Commandline search, with nice emacs integration.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: devhelp-lang 2.28.1 0.1.83 x86_64
=Sum: Developer's Help Program for GNOME
+Des:
<!-- DT:Rich -->
<p>Devhelp Features
Devhelp Features<ul>
<li>Full indexing of books in XML
</li><li>HTML viewer (GtkHTML2)
</li><li>Search by function, struct, macro, and more
</li><li>Auto completion
</li><li>Command line search with nice Emacs integration
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: device-mapper-devel 1.02.27 8.17.20 x86_64
=Sum: Development package for the device mapper
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using the device mapper
</p>
-Des:
##----------------------------------------
=Pkg: dhcp-devel 3.1.3.ESV 0.3.38 x86_64
=Sum: Header Files and Libraries for dhcpctl API
+Des:
<!-- DT:Rich -->
<p>This package contains all of the libraries and headers for developing with
the Internet Software Consortium (ISC) dhcpctl API.
</p>
-Des:
##----------------------------------------
=Pkg: dia 0.96.1 89.35 x86_64
=Sum: A Diagram Creation Program
+Des:
<!-- DT:Rich -->
<p>Dia is designed to be much like the commercial program &#39;Visio.&#39; It can be
used to draw many different kinds of diagrams. It has special
objects to help draw entity relationship diagrams, UML diagrams, SADT,
flowcharts, network diagrams, and simple circuits. It is possible
to add support for new shapes by writing simple XML files, and using a subset
of SVG to draw the shape.
</p><p>
</p><p>
Dia can load and save diagrams to a custom XML format (gzipped by default
to save space), can export diagrams to EPS, PNG, CGM, or SVG formats, and can print
diagrams (including ones that span multiple pages).
</p>
-Des:
##----------------------------------------
=Pkg: dia-lang 0.96.1 89.35 x86_64
=Sum: A Diagram Creation Program
+Des:
<!-- DT:Rich -->
<p>Dia is designed to be much like the commercial program &#39;Visio.&#39; It can be
used to draw many different kinds of diagrams. It has special
objects to help draw entity relationship diagrams, UML diagrams, SADT,
flowcharts, network diagrams, and simple circuits. It is possible
to add support for new shapes by writing simple XML files, and using a subset
of SVG to draw the shape.
</p><p>
</p><p>
Dia can load and save diagrams to a custom XML format (gzipped by default
to save space), can export diagrams to EPS, PNG, CGM, or SVG formats, and can print
diagrams (including ones that span multiple pages).
</p>
-Des:
##----------------------------------------
=Pkg: diffstat 1.46 1.21 x86_64
=Sum: Utility That Provides Statistics Based on the Output of diff
+Des:
<!-- DT:Rich -->
<p>diffstat reads the output of the diff command and displays a histogram
of the insertions, deletions, and modifications in each file.
</p>
-Des:
##----------------------------------------
=Pkg: dirdiff 2.1 2.8 x86_64
=Sum: Diff Tool to Merge Source Trees
+Des:
<!-- DT:Rich -->
<p>Dirdiff is a graphical tool for displaying the differences between
directory trees and for merging changes from one tree into another.
Dirdiff can handle up to five trees.  It displays a main window with a
list of the files that are different between the trees with colored
squares to indicate the relative ages of the versions.  A menu allows
you to display the differences between any two of the versions in
another window.  Another menu allows you to copy the file from one
tree to another.
</p>
-Des:
##----------------------------------------
=Pkg: dmapi-devel 2.2.8 96.18 x86_64
=Sum: DMAPI Libraries and Header Files
+Des:
<!-- DT:Rich -->
<p>The dmapi-devel package contains the libraries and header files
needed to develop programs which make use of the Data
Management API (DMAPI).  If you install dmapi-devel, you will
also want to install the dmapi (runtime) package and the
xfsprogs-devel package.
</p>
-Des:
##----------------------------------------
=Pkg: docbook2x 0.8.8 47.15 x86_64
=Sum: DocBook-to-Texinfo Converter
+Des:
<!-- DT:Rich -->
<p>A new tool based on Perl modules.
</p>
-Des:
##----------------------------------------
=Pkg: dotconf 1.0.13 50.22 x86_64
=Sum: Configuration file parser library
+Des:
<!-- DT:Rich -->
<p>dotconf is a simple-to-use and powerful configuration-file parser
library written in C. The configuration files created for dotconf
look very similar to those used by the Apache Webserver. Even
Container-Directives known from httpd.conf can easily be used in the
exact same manner as for Apache-Modules. It supports various types of
arguments, dynamically loadable modules that create their own
configuration options on-the-fly, a here-documents feature to pass
very long ARG_STR data to your app, and on-the-fly inclusion of
additional config files.
</p>
-Des:
##----------------------------------------
=Pkg: dotconf-devel 1.0.13 50.22 x86_64
=Sum: Configuration file parser library
+Des:
<!-- DT:Rich -->
<p>dotconf is a simple-to-use and powerful configuration-file parser
library written in C. The configuration files created for dotconf
look very similar to those used by the Apache Webserver. Even
Container-Directives known from httpd.conf can easily be used in the
exact same manner as for Apache-Modules. It supports various types of
arguments, dynamically loadable modules that create their own
configuration options on-the-fly, a here-documents feature to pass
very long ARG_STR data to your app, and on-the-fly inclusion of
additional config files.
</p>
-Des:
##----------------------------------------
=Pkg: doxygen 1.5.6 1.19 x86_64
=Sum: Automated C, C++, and Java Documentation Generator
+Des:
<!-- DT:Rich -->
<p>Doxygen is a documentation system for C, C++, Java, and IDL. It can generate an
online class browser (in HTML) and an offline reference manual
(in LaTeX) from a set of documented source files. The documentation is
extracted directly from the sources. Doxygen is developed on a Linux
platform, but it runs on most other UNIX flavors as well. An
executable for Windows 95/NT is also available.
</p>
-Des:
##----------------------------------------
=Pkg: drac 1.12 128.21 x86_64
=Sum: Dynamic Relay Authorization Control
+Des:
<!-- DT:Rich -->
<p>DRAC is a daemon that dynamically updates a relay authorization map
for sendmail. It provides a way to allow legitimate users to relay
mail through an SMTP server, while still preventing others from using
it as a spam relay. User&#39;s IP addresses are added to the map
immediately after they have authenticated to the POP or IMAP
server.
</p>
-Des:
##----------------------------------------
=Pkg: dump 0.4b41 159.18 x86_64
=Sum: Programme de sauvegarde
+Des:
<!-- DT:Rich -->
<p>The dump package contains both dump and restore.  Dump examines files in
a file system, determines which ones need to be backed up, and copies
those files to a specified disk, tape, or other storage medium.  The
restore command performs the inverse function of dump. It can restore a
full backup of a file system.
</p>
-Des:
##----------------------------------------
=Pkg: dvi2tty 5.3.1 183.8 x86_64
=Sum: A TeX-DVI to ASCII Converter
+Des:
<!-- DT:Rich -->
<p>DVI2TTY converts a TeX-DVI file into a readable ASCII text file.
You can then do full text searches without finding the TeX macros.
</p><p>
For documentation, see the man page (man dvi2tty) and
/usr/share/doc/packages/dvi2tty.
</p>
-Des:
##----------------------------------------
=Pkg: e2fsprogs-devel 1.41.9 2.1.51 x86_64
=Sum: Dummy development package
+Des:
<!-- DT:Rich -->
<p>Paquetage de développement pour la rétrocompatibilité.
</p>
-Des:
##----------------------------------------
=Pkg: emacs-nox 22.3 4.32.4 x86_64
=Sum: binaires Emacs sans support de X Window
+Des:
<!-- DT:Rich -->
<p>Eight Megabytes And Constantly Swapping.
Call it
</p><p>
emacs-nox
</p><p>
Love it or leave it.
</p>
-Des:
##----------------------------------------
=Pkg: empathy 2.28.2 0.1.73 x86_64
=Sum: Empathy GNOME Instant Messenger
+Des:
<!-- DT:Rich -->
<p>Empathy is the GNOME Instant Messenger application. It uses Telepathy and Nokia&#39;s
Mission Control, and support a wide variety or services.
</p>
-Des:
##----------------------------------------
=Pkg: empathy-devel 2.28.2 0.1.73 x86_64
=Sum: Empathy IM Application Framework
+Des:
<!-- DT:Rich -->
<p>Empathy consists of a rich set of reusable instant messaging widgets,
and a GNOME client using those widgets. It uses Telepathy and Nokia&#39;s
Mission Control, and reuses Gossip&#39;s UI.
</p>
-Des:
##----------------------------------------
=Pkg: empathy-lang 2.28.2 0.1.73 x86_64
=Sum: Empathy GNOME Instant Messenger
+Des:
<!-- DT:Rich -->
<p>Empathy is the GNOME Instant Messenger application. It uses Telepathy and Nokia&#39;s
Mission Control, and support a wide variety or services.
</p>
-Des:
##----------------------------------------
=Pkg: enchant-devel 1.4.2 16.26 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: enchant-voikko 1.4.2 16.26 x86_64
=Sum: Generic Spell Checking Library - Voikko Plugin
+Des:
<!-- DT:Rich -->
<p>Voikko plugin (Finnish) for enchant, a library providing an efficient extensible abstraction for dealing with different spell checking libraries.
</p>
-Des:
##----------------------------------------
=Pkg: eog-devel 2.28.2 0.1.150 x86_64
=Sum: Visionneur d'images Eye of GNOME pour le bureau GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Eye of GNOME est un visionneur particulièrement rapide. Il peut être utilisé comme module de Nautilus ou séparément. Cette version est compilée pour le bureau GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: epiphany-branding-upstream 2.28.2 0.1.71 x86_64
=Sum: Upstream branding of Epiphany
+Des:
<!-- DT:Rich -->
<p>This package provides upstream Look and Feel for Epiphany.
</p>
-Des:
##----------------------------------------
=Pkg: epydoc 3.0.1 1.17 x86_64
=Sum: Outils pour générer la documentation d'API Python
+Des:
<!-- DT:Rich -->
<p>Epydoc est un outil pour générer la documentation de l&#39;API pour les modules Python en se basant sur les chaînes de documentation strings (docstrings).
Un langage simple de balisage , appelé epytext, peut être utilisé pour formatter les docstrings et ajouter de l&#39;information à certains champs comme les paramètres ou les variables d&#39;instance.
Epydoc comprend aussi les docstrings écrites en &quot;ReStructuredText&quot;, en Javadoc et en texte simple.
</p>
-Des:
##----------------------------------------
=Pkg: eric 4.2.1 1.22 x86_64
=Sum: Environnement de développement Python
+Des:
<!-- DT:Rich -->
<p>Un environnement de développement Python écrit en PyQt
</p>
-Des:
##----------------------------------------
=Pkg: espeak-devel 1.39 2.29 x86_64
=Sum: Système de synthèse de la parole à partir de texte pour l'anglais, l'allemand et d'autres langues
+Des:
<!-- DT:Rich -->
<p>espeak est un système de synthèse de la parole multilingue.
</p>
-Des:
##----------------------------------------
=Pkg: evince-devel 2.28.2 0.2.68 x86_64
=Sum: Visionneur de documents pour GNOME
+Des:
<!-- DT:Rich -->
<p>Evince est un visionneur de documents capables d&#39;afficher les formats PDF et PostScript. Pour plus d&#39;informations à propos d&#39;Evince, veuillez consulter le site http://www.gnome.org/projects/evince/.
</p>
-Des:
##----------------------------------------
=Pkg: evoldap2-devel 2.4.12 4.19 x86_64
=Sum: Libraries, Header Files and Documentation for NTLM patched OpenLDAP
+Des:
<!-- DT:Rich -->
<p>This package provides the NTLM patched OpenLDAP libraries, header files, and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: evolution 2.28.2 0.12.2 x86_64
=Sum: The Integrated GNOME Mail, Calendar, and Address Book Suite
+Des:
<!-- DT:Rich -->
<p>Evolution consists of modular components (at the moment: mailer, calendar,
and address book) that should make daily life easier. Because of the
modular design, it is possible to plug new components into Evolution or embed the
existing ones in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server-devel 2.28.2 0.10.9 x86_64
=Sum: Fichiers de développement pour le serveur de données d'Evolution
+Des:
<!-- DT:Rich -->
<p>Les fichiers de développement du serveur de données Evolution fournit les bibliothèques, les fichiers d&#39;entête et autres nécessaires pour le développement d&#39;applications utilisant les services du serveur de données d&#39;Evolution pour enregistrer des données de carnet d&#39;adresses ou de l&#39;agenda
</p>
-Des:
##----------------------------------------
=Pkg: evolution-devel 2.28.2 0.12.2 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-lang 2.28.2 0.12.2 x86_64
=Sum: The Integrated GNOME Mail, Calendar, and Address Book Suite
+Des:
<!-- DT:Rich -->
<p>Evolution consists of modular components (at the moment: mailer, calendar,
and address book) that should make daily life easier. Because of the
modular design, it is possible to plug new components into Evolution or embed the
existing ones in other applications.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mapi-provider 0.28.2 0.6.2 x86_64
=Sum: Exchange MAPI plugin for Evolution (experimental)
+Des:
<!-- DT:Rich -->
<p>This package provides the Exchange MAPI Account Setup plugin in Evolution and the
corresponding mail, addressbook and calendar backends for Evolution-Data-Server. It depends on the alpha-release of Samba 4 and the MAPI library provided by OpenChange.
</p><p>
NOTE: This plugin is highly experimental and may not work as intended.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mapi-provider-devel 0.28.2 0.6.2 x86_64
=Sum: Exchange MAPI plugin for Evolution (experimental)
+Des:
<!-- DT:Rich -->
<p>This package provides the Exchange MAPI Account Setup plugin in Evolution and the
corresponding mail, addressbook and calendar backends for Evolution-Data-Server. It depends on the alpha-release of Samba 4 and the MAPI library provided by OpenChange.
</p><p>
NOTE: This plugin is highly experimental and may not work as intended.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-mapi-provider-lang 0.28.2 0.6.2 x86_64
=Sum: Exchange MAPI plugin for Evolution (experimental)
+Des:
<!-- DT:Rich -->
<p>This package provides the Exchange MAPI Account Setup plugin in Evolution and the
corresponding mail, addressbook and calendar backends for Evolution-Data-Server. It depends on the alpha-release of Samba 4 and the MAPI library provided by OpenChange.
</p><p>
NOTE: This plugin is highly experimental and may not work as intended.
</p>
-Des:
##----------------------------------------
=Pkg: evolution-sharp 0.18.1 3.41 x86_64
=Sum: Connecteur Mono pour Evolution
+Des:
<!-- DT:Rich -->
<p>Connecteur Mono pour Evolution
</p>
-Des:
##----------------------------------------
=Pkg: expect-devel 5.44.1.11 1.241.1 x86_64
=Sum: Header Files and C API Documentation for expect
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed for linking
to expect from programs written in compiled languages like C, C++, etc.
</p><p>
This package is not needed for developing scripts that run under the /usr/bin/expect interpreter, or any other Tcl interpreter with the expect package loaded.
</p>
-Des:
##----------------------------------------
=Pkg: f2c 0.11 1196.15 x86_64
=Sum: A Fortran-77 to C Translator
+Des:
<!-- DT:Rich -->
<p>Contains libf2c.so.0.11, ported by Rob Hooft. This package uses
an &#39;f77&#39; script that hides the C translation process from the user.
</p>
-Des:
##----------------------------------------
=Pkg: fam-devel 2.7.0 130.21 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>Fam is a file alteration monitoring service. This means that you can receive signals if files are created or changed.
</p><p>
This package provides the files that are needed to compile applications which use the fam service.
</p>
-Des:
##----------------------------------------
=Pkg: farsight 0.1.28 1.36 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: farsight-devel 0.1.28 1.36 x86_64
=Sum: Framework To Deal With All Known Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: farsight2-devel 0.0.16 1.1.169 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: fastjar 0.95 1.22 x86_64
=Sum: The fastjar Java package archiver
+Des:
<!-- DT:Rich -->
<p>Fastjar is an implementation of Sun&#39;s jar utility that comes with the JDK, written entirely in C, and runs in a fraction of the time while being 100% feature compatible.
</p>
-Des:
##----------------------------------------
=Pkg: fdupes 1.40 42.22 x86_64
=Sum: Identifying or deleting duplicate files
+Des:
<!-- DT:Rich -->
<p>FDUPES is a program for identifying or deleting duplicate files residing within specified directories
</p>
-Des:
##----------------------------------------
=Pkg: festival 1.96 73.7 x86_64
=Sum: The Festival Speech Synthesis System
+Des:
<!-- DT:Rich -->
<p>Festival is a multilingual speech synthesis system developed at CSTR. It offers a full text-to-speech system with various APIs as well as an environment for development and research of speech synthesis techniques. It is written in C++ and has a Scheme-based command interpreter for general control.
</p>
-Des:
##----------------------------------------
=Pkg: festival-devel 1.96 73.7 x86_64
=Sum: Development Package for Festival
+Des:
<!-- DT:Rich -->
<p>Files needed for developing software that uses Festival.
</p>
-Des:
##----------------------------------------
=Pkg: fftw 2.1.5 64.16 x86_64
=Sum: Discrete Fourier Transform (DFT) C Subroutine Library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing Discrete Fourier Transforms (DFT) in one or more dimensions, of both real and complex data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: fftw-devel 2.1.5 64.16 x86_64
=Sum: Development libraries for fftw
+Des:
<!-- DT:Rich -->
<p>Development libraries for fftw
</p>
-Des:
##----------------------------------------
=Pkg: fftw-mpi 2.1.5 64.16 x86_64
=Sum: Discrete Fourier Transform (DFT) - MPI support
+Des:
<!-- DT:Rich -->
<p>Discrete Fourier Transform (DFT) - MPI support.
See package fftw for more details.
</p>
-Des:
##----------------------------------------
=Pkg: fftw-mpi-devel 2.1.5 64.16 x86_64
=Sum: Discrete Fourier Transform (DFT) - Header for MPI-Support
+Des:
<!-- DT:Rich -->
<p>Discrete Fourier Transform (DFT) - Header for MPI-Support.
See Package fftw for more information.
</p>
-Des:
##----------------------------------------
=Pkg: fftw-threads 2.1.5 64.16 x86_64
=Sum: Discrete Fourier Transform (DFT) - Threads Support
+Des:
<!-- DT:Rich -->
<p>Discrete Fourier Transform (DFT) - Threads Support
See package fftw for more details
</p>
-Des:
##----------------------------------------
=Pkg: fftw-threads-devel 2.1.5 64.16 x86_64
=Sum: Discrete Fourier Transform (DFT) - Headers for Thread support
+Des:
<!-- DT:Rich -->
<p>Discrete Fourier Transform (DFT) - Headers for Thread support
See package fftw for more details
</p>
-Des:
##----------------------------------------
=Pkg: fftw3 3.1.2 110.7 x86_64
=Sum: Discrete Fourier Transform (DFT) C Subroutine Library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing the Discrete Fourier
Transform (DFT) in one or more dimensions, of both real and complex
data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: fftw3-devel 3.1.2 110.7 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: fftw3-threads 3.1.2 110.7 x86_64
=Sum: Discrete Fourier Transform (DFT) C subroutine library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing the Discrete Fourier
Transform (DFT) in one or more dimensions, of both real and complex
data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: fftw3-threads-devel 3.1.2 110.7 x86_64
=Sum: Discrete Fourier Transform (DFT) C subroutine library
+Des:
<!-- DT:Rich -->
<p>FFTW is a C subroutine library for computing the Discrete Fourier
Transform (DFT) in one or more dimensions, of both real and complex
data, and of arbitrary input size.
</p>
-Des:
##----------------------------------------
=Pkg: file-devel 4.24 43.17 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require the magic &quot;file&quot; interface.
</p>
-Des:
##----------------------------------------
=Pkg: fileshareset 2.0 20.31 x86_64
=Sum: Set and list fileshares
+Des:
<!-- DT:Rich -->
<p>This package contains the the fileshareset utility to allow users to add or
remove file shares.  It&#39;s also possible to list currently shared locations.
/etc/security/fileshare.conf is the main configuration file.
</p>
-Des:
##----------------------------------------
=Pkg: finch 2.6.6 0.6.47 x86_64
=Sum: Text-Based User Interface for Pidgin Instant Messaging Client
+Des:
<!-- DT:Rich -->
<p>A text-based user interface for using libpurple.  This can be run from a
standard text console or from a terminal within X Windows.  It
uses ncurses and our homegrown gnt library for drawing windows
and text.
</p>
-Des:
##----------------------------------------
=Pkg: finch-devel 2.6.6 0.6.47 x86_64
=Sum: Headers etc. for finch Stuffs
+Des:
<!-- DT:Rich -->
<p>The finch-devel package contains the header files, developer
documentation, and libraries required for development of Finch scripts
and plugins.
</p>
-Des:
##----------------------------------------
=Pkg: firmwarekit 3 1.37 x86_64
=Sum: BIOS checker that validates ACPI and other parts for x86 and x86_64 machines
+Des:
<!-- DT:Rich -->
<p>This tool, developed by Intel, is meant for vendors to validate and certifcate their BIOS.
It is also convenient for ACPI or general BIOS related bugs. If you have an
ACPI error/warning, run this tool and provide output for bug tracking
information
</p>
-Des:
##----------------------------------------
=Pkg: flac-devel 1.2.1 68.15 x86_64
=Sum: FLAC Library Development Package
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that
use the FLAC library.
</p>
-Des:
##----------------------------------------
=Pkg: flex 2.5.35 43.98 x86_64
=Sum: Fast Lexical Analyzer Generator
+Des:
<!-- DT:Rich -->
<p>FLEX is a tool for generating scanners: programs that
recognize lexical patterns in text.
</p>
-Des:
##----------------------------------------
=Pkg: flex-32bit 2.5.35 43.98 x86_64
=Sum: Fast Lexical Analyzer Generator
+Des:
<!-- DT:Rich -->
<p>FLEX is a tool for generating scanners: programs that
recognize lexical patterns in text.
</p>
-Des:
##----------------------------------------
=Pkg: flex-old 2.5.4a 41.22 x86_64
=Sum: Fast Lexical Analyser Generator
+Des:
<!-- DT:Rich -->
<p>FLEX is a tool for generating scanners: programs which
recognize lexical patterns in text.
</p><p>
This package contains flex-2.5.4, it will be dropped
when all packages build with flex-2.5.31.
</p>
-Des:
##----------------------------------------
=Pkg: fltk-devel 1.1.9 1.16 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>The Fast Light Tool Kit (&quot;FLTK&quot;, pronounced &quot;fulltick&quot;) is a C++ graphical
user interface toolkit for the X Window System (UNIX(r)), OpenGL(r), and Microsoft(r) Windows(r)
NT 4.0, 95, or 98).
Installation of this package requires you to install a 3D library.
If you do not have 3D hardware you can use the software OpenGL library
in the mesasoft package (series x3d). The library can be recompiled without
3D support.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig-devel 2.6.0 10.6 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package countains all include files, libraries, configuration files needed for compiling applications which use the fontconfig library.
</p><p>
In addition, it contains extensive documentation and manual pages for developers using the library.
</p><p>
Fontconfig is a library for configuring and customizing font access. It contains two essential modules, the configuration module which builds an internal configuration from XML files and the matching module which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig-devel-32bit 2.6.0 10.6 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package countains all include files, libraries, configuration files needed for compiling applications which use the fontconfig library.
</p><p>
In addition, it contains extensive documentation and manual pages for developers using the library.
</p><p>
Fontconfig is a library for configuring and customizing font access. It contains two essential modules, the configuration module which builds an internal configuration from XML files and the matching module which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: fontforge 20080429 1.17 x86_64
=Sum: A Font Editor
+Des:
<!-- DT:Rich -->
<p>FontForge allows editing of outline and bitmap fonts.  With it, you can create
new fonts or modify old ones.  It also converts font formats and
can convert among PostScript (ASCII &amp; binary Type 1, some Type 3s,
and some Type 0s), TrueType, OpenType (Type2), and CID-keyed fonts.
</p>
-Des:
##----------------------------------------
=Pkg: fping 2.4b2 94.22 x86_64
=Sum: A Program to Ping Multiple Hosts
+Des:
<!-- DT:Rich -->
<p>FPing is a ping-like program that uses the Internet Control
Message Protocol (ICMP) echo request to determine if a target host is
responding. FPing differs from ping in that you can specify any
number of targets on the command line or specify a file containing a
list of targets to ping. Instead of sending pings to one target until
it times out or replies, FPing sends a ping packet and moves on
to the next target in a round-robin fashion.
</p><p>
In the default mode, if a target replies, it is noted and removed from
the list of targets to check. If a target does not respond within a
certain time limit or retry limit, it is designated as unreachable.
FPing also supports sending a specified number of pings to a target
or looping indefinitely (as in ping).
</p><p>
Unlike ping, FPing is meant to be used in scripts. Its output is
designed to be easy to parse.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut-devel 080721 21.9 x86_64
=Sum: Development libraries, includes and man pages for freeglut (GLUT Library)
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications for the freeglut library.
</p><p>
In addition, it also includes manual pages which describe all functions provided by the freeglut library.
</p><p>
freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut-devel-32bit 080721 21.9 x86_64
=Sum: Development libraries, includes and man pages for freeglut (GLUT Library)
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications for the freeglut library.
</p><p>
In addition, it also includes manual pages which describe all functions provided by the freeglut library.
</p><p>
freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-client-devel 1.1.6 40.1 x86_64
=Sum: Header files, libraries and development documentation for freeradius-client
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and development
documentation for freeradius-client. You need to install freeradius-client-devel if you want to develop applications using freeradius-client.
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-client-libs 1.1.6 40.1 x86_64
=Sum: Shared library of FreeRADIUS Client
+Des:
<!-- DT:Rich -->
<p>The package contains the shared library of FreeRADIUS Client
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-server-devel 2.1.1 7.7.19.77 x86_64
=Sum: FreeRADIUS Development Files (static libs)
+Des:
<!-- DT:Rich -->
<p>These are the static libraries for the FreeRADIUS package.
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-server-libs 2.1.1 7.7.19.77 x86_64
=Sum: FreeRADIUS shared library
+Des:
<!-- DT:Rich -->
<p>The FreeRADIUS shared library
</p>
-Des:
##----------------------------------------
=Pkg: freetype2-devel 2.3.7 25.10.1 x86_64
=Sum: Development environment for the freetype2 TrueType font library
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries and documentation needed to develop applications that require the freetype2 TrueType font library.
</p><p>
It also contains a small tutorial for using that library.
</p>
-Des:
##----------------------------------------
=Pkg: freetype2-devel-32bit 2.3.7 25.10.1 x86_64
=Sum: Development environment for the freetype2 TrueType font library
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries and documentation needed to develop applications that require the freetype2 TrueType font library.
</p><p>
It also contains a small tutorial for using that library.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi-devel 0.10.9 57.22 x86_64
=Sum: Static Libraries and Header Files for FriBiDi
+Des:
<!-- DT:Rich -->
<p>This package provides the static libraries and header files for FriBiDi.
</p>
-Des:
##----------------------------------------
=Pkg: fuse-devel 2.7.2 61.18.1 x86_64
=Sum: Development package for FUSE (userspace filesystem) modules
+Des:
<!-- DT:Rich -->
<p>This package contains all include files, libraries and configuration files needed to develop programs that use the <a href="pkg://fuse"> FUSE</a>
library to implement <a href="pkg://kernel-default"> Linux</a> file systems in user space.
</p><p>
Many user space file systems are already provided as packages for installation:
<ul>
<li><a href="pkg://curlftpfs">curlftpfs</a> (mount FTP servers),
</li><li><a href="pkg://encfs">encfs</a> (layered file encryption),
</li><li><a href="pkg://fuseiso">fuseiso</a> (mount iso, img, bin, mdf and nrg CD-ROM images),
</li><li><a href="pkg://fusepod">fusepod</a> (mount iPods),
</li><li><a href="pkg://fusesmb">fusesmb</a> (mount a fully browseable network neighborhood),
</li><li><a href="pkg://gphotofs">gphotofs</a> (mount gphoto-supported cameras),
</li><li><a href="pkg://ntfs-3g">ntfs-3g</a> (mount NTFS volumes read-write),
</li><li><a href="pkg://obexfs">obexfs</a> (mount of bluetooth devices),
</li><li><a href="pkg://sshfs">sshfs</a> (mount over ssh),
</li><li><a href="pkg://wdfs">wdfs</a> (mount of WebDAV shares)
</li></ul>
With <tt>fuse-devel</tt>, administrators can compile and install other user space file systems which can be found at http://fuse.sourceforge.net/wiki
</p>
-Des:
##----------------------------------------
=Pkg: fvwm2 2.5.26 1.25 x86_64
=Sum: Improved Version of FVWM Window Manager
+Des:
<!-- DT:Rich -->
<p>FVWM is a virtual desktop window manager for
the X Window System.
</p><p>
FVWM is intended to have a small memory footprint but a rich
feature set, to be extremely customizable and extendible, and
to be very compatible with the Motif MWM.
</p>
-Des:
##----------------------------------------
=Pkg: fwnn-devel 1.1.1a017 672.16 x86_64
=Sum: Development Library and Header Files for FreeWnn
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries for building
client programs which use FreeWnn for Japanese input.
</p>
-Des:
##----------------------------------------
=Pkg: fxload 2008_10_13 1.19 x86_64
=Sum: Download Firmware into USB FX and FX2 Devices
+Des:
<!-- DT:Rich -->
<p>This program can download firmware into FX and FX2
EZ-USB devices as well as the original AnchorChips EZ-USB.  It is
intended to be invoked by hotplug scripts when the unprogrammed device
appears on the bus.
</p><p>
Primarily as an aid for developers, this can also be used to update
firmware on devices that boot from I2C serial EEPROMs.  For that
use, as well as downloading firmware to all other off-chip memory,
a second stage loader must first be downloaded.
</p>
-Des:
##----------------------------------------
=Pkg: gammu 1.20.0 3.26 x86_64
=Sum: Utilitaires pour les téléphones portables
+Des:
<!-- DT:Rich -->
<p>Gammu s&#39;utilise avec les téléphones mobiles afin de téléphoner, mettre à jour son carnet d&#39;adresse, modifier son calendrier et taches à faire, envoyer et recevoir des emails,
charger et récupérer des soneries, des images (différents types de logos), synchroniser l&#39;heure, activer le  moniteur internet, gérer son wap,
choisir ses favoris et plus encore. Les fonctions dépendent du modèle de téléphone.
</p><p>
Les téléphones supportés actuellement sont:<ul>
<li>La plus part des Nokia* Alcatel BE5 (501/701), BF5 (715)
</li><li>Certains téléphones comme: Siemens, Nokia, Alcatel, IPAQ, etc
</li></ul>
Un autre utilitaire similaire que vous pouvez tester est <a href="pkg://gnokii">gnokii</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gammu-devel 1.20.0 3.26 x86_64
=Sum: Fichiers de developpement pour Gammu
+Des:
<!-- DT:Rich -->
<p>Gammu can do such things with cellular phones as making data calls,
updating the address book, changing calendar and ToDo entries, sending and
receiving SMS messages, loading and getting ring tones and pictures (different
types of logos), synchronizing time, enabling NetMonitor, managing WAP
settings and bookmarks and much more. Functions depend on the phone model.
</p><p>
Currently supported phones are:
<ul>
<li>Many Nokia phones.
</li><li>Alcatel BE5 (501/701), BF5 (715).
</li><li>Any AT capable phone (Siemens, Nokia, Alcatel, IPAQ,...).
</li></ul>
Another simmilar tool you might want to check is <a href="pkg://gnokii">gnokii</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-ada 4.3 62.198 x86_64
=Sum: Le compilateur GNU pour le langage ADA 
+Des:
<!-- DT:Rich -->
<p>Le compilateur GNU pour le langage Ada.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-fortran-32bit 4.3 62.198 x86_64
=Sum: Le compilateur GNU du langage Fortran
+Des:
<!-- DT:Rich -->
<p>Le compilateur GNU du langage Fortran
</p>
-Des:
##----------------------------------------
=Pkg: gcc-fortran 4.3 62.198 x86_64
=Sum: Le compilateur GNU du langage Fortran
+Des:
<!-- DT:Rich -->
<p>Le compilateur GNU du langage Fortran
</p>
-Des:
##----------------------------------------
=Pkg: gcc-gij-32bit 4.3 62.198 x86_64
=Sum: The system GNU Java bytecode interpreter
+Des:
<!-- DT:Rich -->
<p>The system GNU Java bytecode interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-gij 4.3 62.198 x86_64
=Sum: The system GNU Java bytecode interpreter
+Des:
<!-- DT:Rich -->
<p>The system GNU Java bytecode interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-java 4.3 62.198 x86_64
=Sum: Le compilateur GNU du langage Java
+Des:
<!-- DT:Rich -->
<p>Le compilateur GNU du langage java.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-obj-c++ 4.3 62.198 x86_64
=Sum: Compilateur GNU pour le langage Objective C++
+Des:
<!-- DT:Rich -->
<p>Compilateur GNU pour le langage Objective C++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-objc-32bit 4.3 62.198 x86_64
=Sum: The system GNU Objective C Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU Objective C Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc-objc 4.3 62.198 x86_64
=Sum: The system GNU Objective C Compiler
+Des:
<!-- DT:Rich -->
<p>The system GNU Objective C Compiler.
</p>
-Des:
##----------------------------------------
=Pkg: gcc33 3.3.3 11.9 x86_64
=Sum: The GNU C Compiler Version 3.3(evaluation)
+Des:
<!-- DT:Rich -->
<p>using the additional packages gcc33-libs, gcc33-c++, gcc33-g77 and gcc33-objc,
you can also complile C++, Fortran 77 and Objective C.
</p><p>
NOTE: This package is for evaluation and testing purposes only!
</p>
-Des:
##----------------------------------------
=Pkg: gcc33-32bit 3.3.3 11.9 x86_64
=Sum: The GNU C Compiler Version 3.3(evaluation)
+Des:
<!-- DT:Rich -->
<p>using the additional packages gcc33-libs, gcc33-c++, gcc33-g77 and gcc33-objc,
you can also complile C++, Fortran 77 and Objective C.
</p><p>
NOTE: This package is for evaluation and testing purposes only!
</p>
-Des:
##----------------------------------------
=Pkg: gcc33-fortran 3.3.3 11.9 x86_64
=Sum: The GNU Fortran 77 Compiler and Support Files
+Des:
<!-- DT:Rich -->
<p>This is the Fortran 77 compiler of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: gcc33-fortran-32bit 3.3.3 11.9 x86_64
=Sum: The GNU Fortran 77 Compiler and Support Files
+Des:
<!-- DT:Rich -->
<p>This is the Fortran 77 compiler of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-ada 4.3.4_20091019 0.7.35 x86_64
=Sum: Compilateur GNU du langage Ada95 basé sur GCC (GNAT)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient un compilateur Ada95 et les outils de developpement associés
pour les technologies GNU de GCC. Ada95 est un langage orienté objet
successeur du langage Ada83. Pour compiler ce paquet depuis les sources
vous devez avoir le compileur bootstrap installé.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-fortran-32bit 4.3.4_20091019 0.7.35 x86_64
=Sum: Le compilateur GNU du langage Fortran avec fichiers de support
+Des:
<!-- DT:Rich -->
<p>Compilateur GNU du langage Fortran qui fait partit de la collection de compilateur GNU (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-fortran 4.3.4_20091019 0.7.35 x86_64
=Sum: Le compilateur GNU du langage Fortran avec fichiers de support
+Des:
<!-- DT:Rich -->
<p>Compilateur GNU du langage Fortran qui fait partit de la collection de compilateur GNU (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-gij-32bit 4.3.4_20091019 0.7.33 x86_64
=Sum: Interpréteur de code java pour gcc
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient l&#39;interpréteur de code java gij et ses outils connexes.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-gij 4.3.4_20091019 0.7.33 x86_64
=Sum: Interpréteur de code java pour gcc
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient l&#39;interpréteur de code java gij et ses outils connexes.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-java 4.3.4_20091019 0.7.33 x86_64
=Sum: Le compilateur GNU pour le langage java 
+Des:
<!-- DT:Rich -->
<p>Le compilateur java de la suite d&#39;outils GCC-tools-suite.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-obj-c++ 4.3.4_20091019 0.7.35 x86_64
=Sum: Compilateur GNU du langage Objective C++
+Des:
<!-- DT:Rich -->
<p>This package contains the GNU Objective C++ compiler. Objective C++ is an
object oriented language, created by Next Inc. and used in their Nextstep
OS. The source code is available in the gcc package.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-objc-32bit 4.3.4_20091019 0.7.35 x86_64
=Sum: Compilateur GNU pour le langage Objective C
+Des:
<!-- DT:Rich -->
<p>This package contains the GNU Objective C compiler. Objective C is an
object oriented language, created by Next Inc. and used in their Nextstep
OS. The source code is available in the gcc package.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43-objc 4.3.4_20091019 0.7.35 x86_64
=Sum: Compilateur GNU pour le langage Objective C
+Des:
<!-- DT:Rich -->
<p>This package contains the GNU Objective C compiler. Objective C is an
object oriented language, created by Next Inc. and used in their Nextstep
OS. The source code is available in the gcc package.
</p>
-Des:
##----------------------------------------
=Pkg: gcc45 4.5.0_20100414 1.2.7 x86_64
=Sum: The GNU C Compiler and Support Files
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language
frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and gcc-obj-c++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc45-c++ 4.5.0_20100414 1.2.7 x86_64
=Sum: Compilateur GNU du lange C++ 
+Des:
<!-- DT:Rich -->
<p>This package contains the GNU compiler for C++.
</p>
-Des:
##----------------------------------------
=Pkg: gcc45-fortran 4.5.0_20100414 1.2.7 x86_64
=Sum: Le compilateur GNU du langage Fortran avec fichiers de support
+Des:
<!-- DT:Rich -->
<p>Compilateur GNU du langage Fortran qui fait partit de la collection de compilateur GNU (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: gconf-sharp2 2.24.0 14.41 x86_64
=Sum: Mono bindings for gconf
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for gconf and gconf peditors.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-devel 2.28.0 1.6.10 x86_64
=Sum: Inclue les fichier et bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2-doc 2.28.0 1.6.10 x86_64
=Sum: Documentation pour la configuration de la base de données système de l'environement de bureau GNOME 2.X
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient la documentation aditionnelle de GConf, l&#39;éditeur de la base de données des configurations de GNOME
</p>
-Des:
##----------------------------------------
=Pkg: gconfmm 2.28.0 1.1.217 x86_64
=Sum: Interface C++ pour GConf (fait partie du projet GNOME)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GConf. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use GConf with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: gconfmm-devel 2.28.0 1.1.217 x86_64
=Sum: Interface C++ pour Gconf
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GConf. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use GConf with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: gd-devel 2.0.36.RC1 52.18 x86_64
=Sum: Une bibliothèque de dessin pour les programmes qui produit des images PNG et JPEG en sortie.
+Des:
<!-- DT:Rich -->
<p>gd permet au code de dessiner rapidement de simages complètes avec des lignes, des arcs, des textes, de multiples couleurs, de couper coller depuis d&#39;autres images, de remplir des zones. gd produit des images de type PNG ou JPEG. Il est donc très utile pour les applications Web, ou le PNG et le JPEG sont des formats acceptés par la plus part des navigateurs web. 
</p>
-Des:
##----------------------------------------
=Pkg: gdbm-devel 1.8.3 371.83 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm-devel-32bit 1.8.3 371.83 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gdbserver 7.0 0.4.16 x86_64
=Sum: Remote Server for the GNU Debugger
+Des:
<!-- DT:Rich -->
<p>GDBSERVER is a program that allows you to run GDB on a different machine than the one which is running the program being debugged.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf 0.22.0 294.24 x86_64
=Sum: Une bibliothèque pour la manipulation rapide de pixels.
+Des:
<!-- DT:Rich -->
<p>Avec cette bibliothèque vous pouvez creer, changer, redimentionner des flots de pixels
de manière vraiment éfficace.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf-32bit 0.22.0 294.24 x86_64
=Sum: Une bibliothèque pour la manipulation rapide de pixels.
+Des:
<!-- DT:Rich -->
<p>Avec cette bibliothèque vous pouvez creer, changer, redimentionner des flots de pixels
de manière vraiment éfficace.
</p>
-Des:
##----------------------------------------
=Pkg: gdk-pixbuf-devel 0.22.0 294.24 x86_64
=Sum: GdkPixBuf - Environnement de développement
+Des:
<!-- DT:Rich -->
<p>GdkPixBuf - Environnement de développement
</p>
-Des:
##----------------------------------------
=Pkg: gegl-0_0 0.0.20 1.35 x86_64
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: gegl-devel 0.0.20 1.35 x86_64
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot-branding-SLED 4.1.24 1.2.18 x86_64
=Sum: gfxboot SLED theme
+Des:
<!-- DT:Rich -->
<p>SLED theme for gfxboot (bootloader graphics).
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot-branding-SLES 4.1.24 1.2.18 x86_64
=Sum: gfxboot SLES theme
+Des:
<!-- DT:Rich -->
<p>SLES theme for gfxboot (bootloader graphics).
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot-devel 4.1.24 1.2.18 x86_64
=Sum: Tools for creating a graphical boot logo
+Des:
<!-- DT:Rich -->
<p>Here you find the necessary programs to create your own graphical boot logo.
The logo can be used with grub, lilo or syslinux.
</p>
-Des:
##----------------------------------------
=Pkg: ggz 0.0.14.1 4.16 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: ggz-client-libs 0.0.14.1 59.19 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: ggz-client-libs-devel 0.0.14.1 59.19 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: ggz-client-libs-lang 0.0.14.1 59.19 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: ghex 2.22.0 1.33 x86_64
=Sum: Editeur de fichier Binaire de GNOME
+Des:
<!-- DT:Rich -->
<p>GHex permet à l&#39;utilisateur d&#39;ouvrir des donnés depuis n&#39;importe quel fichier et de les éditer
en hexadécimal ou en ACSII. C&#39;est le meilleur pour toutes les personnes qui jouent et utilisent un format
qui n&#39;est pas l&#39;ACSI pour sauvegarder. 
</p>
-Des:
##----------------------------------------
=Pkg: ghex-devel 2.22.0 1.33 x86_64
=Sum: Editeur de fichier Binaire de GNOME
+Des:
<!-- DT:Rich -->
<p>GHex permet à l&#39;utilisateur d&#39;ouvrir des donnés depuis n&#39;importe quel fichier et de les éditer
en hexadécimal ou en ACSII. C&#39;est le meilleur pour toutes les personnes qui jouent et utilisent un format
qui n&#39;est pas l&#39;ACSI pour sauvegarder. 
</p>
-Des:
##----------------------------------------
=Pkg: ghex-lang 2.22.0 1.33 x86_64
=Sum: Editeur de fichier Binaire de GNOME
+Des:
<!-- DT:Rich -->
<p>GHex permet à l&#39;utilisateur d&#39;ouvrir des donnés depuis n&#39;importe quel fichier et de les éditer
en hexadécimal ou en ACSII. C&#39;est le meilleur pour toutes les personnes qui jouent et utilisent un format
qui n&#39;est pas l&#39;ACSI pour sauvegarder. 
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-devel 8.62 32.27.31 x86_64
=Sum: En-tête de l'API de Ghostscript
+Des:
<!-- DT:Rich -->
<p>Package includes the header together with the
required link to the shared library libgs.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-ijs-devel 8.62 32.27.31 x86_64
=Sum: Kit de développement IJS
+Des:
<!-- DT:Rich -->
<p>Package includes the ijs-config script together with the
required header C files and the static ijs client library.
</p>
-Des:
##----------------------------------------
=Pkg: giflib-devel-32bit 4.1.6 11.10 x86_64
=Sum: Library for Working with GIF Images - Files Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This Library allows manipulatng GIF Image files.
Since the LZW patents have expired, giflib can be used instead of libungif again.
</p>
-Des:
##----------------------------------------
=Pkg: giflib-devel 4.1.6 11.10 x86_64
=Sum: Library for Working with GIF Images - Files Mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This Library allows manipulatng GIF Image files.
Since the LZW patents have expired, giflib can be used instead of libungif again.
</p>
-Des:
##----------------------------------------
=Pkg: gimp 2.6.2 3.28.1 x86_64
=Sum: Programme de traitement d'images, libre et extensible
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-devel 2.6.2 3.28.1 x86_64
=Sum: Programme de traitement d'images, libre et extensible
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-lang 2.6.2 3.28.1 x86_64
=Sum: Programme de traitement d'images, libre et extensible
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gimp-plugins-python 2.6.2 3.28.1 x86_64
=Sum: The GNU Image Manipulation Program - python-gtk based plugins
+Des:
<!-- DT:Rich -->
<p>The GIMP (GNU Image Manipulation Program) is a powerful image composition and editing program, which can be extremely useful for creating logos and other graphics for Web pages.  The GIMP offers many of the tools and filters you would expect to find in similar commercial offerings and contains some interesting extras as well. The GIMP provides alarge image manipulation toolbox, including channel operations and layers, effects, subpixel imaging and antialiasing, and conversions- all including multilevel undo.
The GIMP offers a scripting facility, but many of the included
scripts rely on fonts that we cannot distribute. The GIMP FTP sitehas a package of fonts that you need to run the included scripts and that you can install yourself. Some of the fonts have unusual licensing requirements, but all the licenses are documented in the package.
Get
ftp://ftp.gimp.org/pub/gimp/fonts/freefonts-0.10.tar.gz and
ftp://ftp.gimp.org/pub/gimp/fonts/sharefonts-0.10.tar.gz if you like to do so. Alternatively, choose fonts that exist on your systembefore running the scripts.
</p>
-Des:
##----------------------------------------
=Pkg: gir-repository 0.6.5 1.1.91 x86_64
=Sum: GIR Repository
+Des:
<!-- DT:Rich -->
<p>This is a repository of GIR interface description files.
</p>
-Des:
##----------------------------------------
=Pkg: git 1.6.0.2 7.28.37 x86_64
=Sum: Fast, scalable, distributed revision control system
+Des:
<!-- DT:Rich -->
<p>Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.
</p><p>
This package itself only provides the README of git but with the packages it requires, it brings you a complete Git environment including GTK and email interfaces and tools for importing source code repositories from other revision control systems such as subversion, CVS, and GNU arch.
</p>
-Des:
##----------------------------------------
=Pkg: git-arch 1.6.0.2 7.28.37 x86_64
=Sum: git-arch - Outils interactifs de GNU pour importer des dépôts de Arch
+Des:
<!-- DT:Rich -->
<p>Outils pour importer les dépôts GNU de arch vers le paneau de contrôle GIT. Un shell système complet pour les gens qui n&#39;aiment pas les
lignes de commande :-)
</p>
-Des:
##----------------------------------------
=Pkg: git-core 1.6.0.2 7.28.37 x86_64
=Sum: Core git tools
+Des:
<!-- DT:Rich -->
<p>Git is a fast, scalable, distributed revision control system with an
unusually rich command set that provides both high-level operations
and full access to internals.
</p><p>
These are the core tools with minimal dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: git-cvs 1.6.0.2 7.28.37 x86_64
=Sum: Outil Git pour importer des dépôts CVS
+Des:
<!-- DT:Rich -->
<p>Outils pour impoter des dépôts CVS au paneau de contrôle Git. 
</p>
-Des:
##----------------------------------------
=Pkg: git-daemon 1.6.0.2 7.28.37 x86_64
=Sum: Simple Server for Git Repositories
+Des:
<!-- DT:Rich -->
<p>A really simple TCP git daemon. In the default configuration it allows read only access to repositories in /srv/git/ that contain the &#39;git-daemon-export-ok&#39; file.
</p>
-Des:
##----------------------------------------
=Pkg: git-email 1.6.0.2 7.28.37 x86_64
=Sum: Outil pour envoyer des emails
+Des:
<!-- DT:Rich -->
<p>Email interface for the GIT version control system.
</p>
-Des:
##----------------------------------------
=Pkg: git-gui 1.6.0.2 7.28.37 x86_64
=Sum: Grapical tool for common git operations
+Des:
<!-- DT:Rich -->
<p>A Tcl/Tk based graphical user interface to Git. git-gui focuses on allowing users to make changes to their repository by making new commits, amending existing ones, creating branches, performing local merges, and fetching/pushing to remote repositories.
</p><p>
Unlike gitk, git-gui focuses on commit generation and single file annotation, and does not show project history. It does however supply menu actions to start a gitk session from within git-gui.
</p>
-Des:
##----------------------------------------
=Pkg: git-svn 1.6.0.2 7.28.37 x86_64
=Sum: Git tools for importing Subversion repositories
+Des:
<!-- DT:Rich -->
<p>Tools for importing Subversion repositories to the Git version control system.
</p>
-Des:
##----------------------------------------
=Pkg: git-web 1.6.0.2 7.28.37 x86_64
=Sum: Git Web Interface
+Des:
<!-- DT:Rich -->
<p>CGI script that allows browsing git repositories via web interface.
</p><p>
The apache2 configuration contained in this package installs a virtual directory /git/ that calls the cgi script.
</p>
-Des:
##----------------------------------------
=Pkg: gitk 1.6.0.2 7.28.37 x86_64
=Sum: Git revision tree visualiser
+Des:
<!-- DT:Rich -->
<p>Grapical tool for visualization of revision trees of projects maintained in the Git version control system. It name gitk indicates that it&#39;s written using the Tk Widget set.
</p><p>
A simple Tk based graphical interface for common Git operations is found in the package git-gui.
</p>
-Des:
##----------------------------------------
=Pkg: gjiten 2.6 111.35 x86_64
=Sum: Dictionaire japonais pour GNOME/GTK+
+Des:
<!-- DT:Rich -->
<p>Gjiten is a GNOME-based Japanese dictionary program. It uses some of
the xjdic code written by Jim Breen and his dictionary files.  Gjiten
also has a kanji dictionary. Any combination of stroke count, radicals,
and search key can be used for kanji lookups.  It requires a working X
input method (such as kinput2) for Japanese input.
</p>
-Des:
##----------------------------------------
=Pkg: glade 2.12.2 29.34.186 x86_64
=Sum: Glade est une interface de construction de fenêtre GTK2+
+Des:
<!-- DT:Rich -->
<p>Glade est une interface gratuite de construction de fenêtre GTK2+ GNOME 2.X.
</p>
-Des:
##----------------------------------------
=Pkg: glade-lang 2.12.2 29.34.186 x86_64
=Sum: Glade est une interface de construction de fenêtre GTK2+
+Des:
<!-- DT:Rich -->
<p>Glade est une interface gratuite de construction de fenêtre GTK2+ GNOME 2.X.
</p>
-Des:
##----------------------------------------
=Pkg: glade-sharp2 2.12.9 22.4.23 x86_64
=Sum: Mono bindings pour glade
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient Mono bindings pour glade.
</p>
-Des:
##----------------------------------------
=Pkg: glade3 3.6.7 2.1.179 x86_64
=Sum: User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: glade3-lang 3.6.7 2.1.179 x86_64
=Sum: User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: glade3-libgnomedb 3.1.2 88.7.22 x86_64
=Sum: Glade3 binding for Library for Writing GNOME Database Programs
+Des:
<!-- DT:Rich -->
<p>Libgnomedb is a library that eases the task of writing
GNOME database programs.
</p>
-Des:
##----------------------------------------
=Pkg: glib 1.2.10 737.23.43 x86_64
=Sum: Les fonctions utiles pour Gtk
+Des:
<!-- DT:Rich -->
<p>Bibliothèque avec fonctions pour Gtk
</p>
-Des:
##----------------------------------------
=Pkg: glib-32bit 1.2.10 737.23.43 x86_64
=Sum: Les fonctions utiles pour Gtk
+Des:
<!-- DT:Rich -->
<p>Bibliothèque avec fonctions pour Gtk
</p>
-Des:
##----------------------------------------
=Pkg: glib-devel 1.2.10 737.23.43 x86_64
=Sum: Bibliothèques de développement et fichiers d'en-tête de la bibliothèque Glib
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient tout les fichiers et bibliothèques nécessaires pour compiler et pour utiliser les applications dépendant de Glib (qui fournit des fonctions utiles pour Gtk).
</p>
-Des:
##----------------------------------------
=Pkg: glib-devel-32bit 1.2.10 737.23.43 x86_64
=Sum: Bibliothèques de développement et fichiers d'en-tête de la bibliothèque Glib
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient tout les fichiers et bibliothèques nécessaires pour compiler et pour utiliser les applications dépendant de Glib (qui fournit des fonctions utiles pour Gtk).
</p>
-Des:
##----------------------------------------
=Pkg: glib2-devel 2.22.5 0.2.23 x86_64
=Sum: Inclue les fichier et bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries, configuration files and development tools (with manual pages) needed to compile and link applications using the glib library.
</p><p>
The glib library provides convenient functions, such as lists and
hashes, to a C programmer and is used by Gtk+ and GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-doc 2.22.5 0.2.23 x86_64
=Sum: Documentation for the C Library with Convenience Functions
+Des:
<!-- DT:Rich -->
<p>This package contains additional documentation for the <a href="pkg://glib2">glib2</a> library.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-html 2.11.1 0.17.4 x86_64
=Sum: Documentation HTML pour les bibliothèques GNU du langage C
+Des:
<!-- DT:Rich -->
<p>This package contains the HTML documentation for the GNU C library.
Due to a lack of resources, this documentation is not complete
and is partially out of date.
</p>
-Des:
##----------------------------------------
=Pkg: glibc-info 2.11.1 0.17.4 x86_64
=Sum: Fichiers d'informations pour les bibliothèques GNU C
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient, sous forme de fichiers INFO, la documentation relative
à la bibliothèque GNU C. En raison du manque de ressources auquel se voient
confrontés les développeurs de la GLIBC, la documentation n&#39;est pas complète
et certaines parties n&#39;ont pas été actualisées.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2-devel 2.22.1 1.1.56 x86_64
=Sum: Interface C++ pour la bibliothèque GLib2 (API)
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. glibmm24 wraps GLib 2.
Highlights include typesafe callbacks, widgets extensible via inheritance
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: glitz 0.5.6 185.16 x86_64
=Sum: Glitz--OpenGL Image Compositing Library
+Des:
<!-- DT:Rich -->
<p>Glitz is an OpenGL image compositing library. Glitz provides
Porter/Duff compositing of images and implicit mask generation for
geometric primitives, including trapezoids, triangles, and rectangles.
The semantics of Glitz are designed to precisely match the
specification of the X Render extension. Glitz not only implements
X Render features, like component alpha and image transformations, but
also support for additional features like convolution filters and color
gradients, which are not currently part of the X Render specification.
The performance and capabilities of Glitz are very dependent on thegraphics hardware. Glitz does not in any way handle software fallbacks when graphics hardware is insufficient. However, it will report if any requested operation cannot be carried out by thegraphics hardware, making a higher level software layer responsible for appropriate actions.
</p>
-Des:
##----------------------------------------
=Pkg: glitz-32bit 0.5.6 185.16 x86_64
=Sum: Glitz--OpenGL Image Compositing Library
+Des:
<!-- DT:Rich -->
<p>Glitz is an OpenGL image compositing library. Glitz provides
Porter/Duff compositing of images and implicit mask generation for
geometric primitives, including trapezoids, triangles, and rectangles.
The semantics of Glitz are designed to precisely match the
specification of the X Render extension. Glitz not only implements
X Render features, like component alpha and image transformations, but
also support for additional features like convolution filters and color
gradients, which are not currently part of the X Render specification.
The performance and capabilities of Glitz are very dependent on thegraphics hardware. Glitz does not in any way handle software fallbacks when graphics hardware is insufficient. However, it will report if any requested operation cannot be carried out by thegraphics hardware, making a higher level software layer responsible for appropriate actions.
</p>
-Des:
##----------------------------------------
=Pkg: glitz-devel 0.5.6 185.16 x86_64
=Sum: glitz - OpenGL image compositing library
+Des:
<!-- DT:Rich -->
<p>Glitz is an OpenGL image compositing library. Glitz provides
Porter/Duff compositing of images and implicit mask generation for
geometric primitives including trapezoids, triangles, and rectangles.
</p><p>
The semantics of glitz are designed to precisely match the
specification of the X Render extension. Glitz does not only implement
X Render features like component alpha and image transformations, but
also support for additional features like convolution filters and color
gradients, which are not currently part of the X Render specification.
</p><p>
The performance and capabilities of glitz are much dependent on
graphics hardware. Glitz does not in any way handle software
fall-backs when graphics hardware is insufficient. However, glitz
will report if any requested operation cannot be carried out by
graphics hardware, hence making a higher level software layer
responsible for appropriate actions.
</p>
-Des:
##----------------------------------------
=Pkg: gltt-devel 2.5.2 704.28 x86_64
=Sum: Bibliothèque pour TrueType sous OpenGL
+Des:
<!-- DT:Rich -->
<p>Gltt est une bibliothèque qui permet la lecture et l&#39;utilisation de polices
TrueType dans les applications OpenGL
</p><p>
Les polices bitmap et antialiased ainsi que les tracés vectoriels
et en mode polygone sont supportés.
</p>
-Des:
##----------------------------------------
=Pkg: gmime-2_4-devel 2.4.8 1.2.55 x86_64
=Sum: Bibliothèque MIME
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multi-purpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmime-devel 2.2.23 1.41.1 x86_64
=Sum: Bibliothèque MIME
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multi-purpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmime-sharp 2.2.23 1.41.1 x86_64
=Sum:  
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multipurpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmp-devel-32bit 4.2.3 10.99 x86_64
=Sum: Inclu les fichiers et bibliothèques pour le developpement avec les bibliothèques GNU MP (Multi Process)
+Des:
<!-- DT:Rich -->
<p>Bibliothèque permettant des opération avec des nombres très longs (entiers ou avec virgule flottante).
</p>
-Des:
##----------------------------------------
=Pkg: gmp-devel 4.2.3 10.99 x86_64
=Sum: Inclu les fichiers et bibliothèques pour le developpement avec les bibliothèques GNU MP (Multi Process)
+Des:
<!-- DT:Rich -->
<p>Bibliothèque permettant des opération avec des nombres très longs (entiers ou avec virgule flottante).
</p>
-Des:
##----------------------------------------
=Pkg: gnet 2.0.7 65.29.8 x86_64
=Sum: Bibliothèque réseau pour les programmes basés sur GLib
+Des:
<!-- DT:Rich -->
<p>GNet est un bibliothèque simple pour le réseau. Elle est écrite en C.
Elle est bâtie au-dessus de GLib et est orientée objet. Elle vise à être simple d&#39;utilisation et d&#39;être facile à porter.
</p>
-Des:
##----------------------------------------
=Pkg: gnet-devel 2.0.7 65.29.8 x86_64
=Sum: Bibliothèque réseau pour les programmes basés sur GLib
+Des:
<!-- DT:Rich -->
<p>GNet est un bibliothèque simple pour le réseau. Elle est écrite en C.
Elle est bâtie au-dessus de GLib et est orientée objet. Elle vise à être simple d&#39;utilisation et d&#39;être facile à porter.
</p>
-Des:
##----------------------------------------
=Pkg: gnokii-devel 0.6.27 1.1.251 x86_64
=Sum: Nokia Connectivity Program
+Des:
<!-- DT:Rich -->
<p>gnokii is a package of programs for communicating with a Nokia cellular phone
in Linux. Please read the READMEs in /usr/share/doc/packages/gnokii
to find out which models are supported.
</p>
-Des:
##----------------------------------------
=Pkg: gnokii-smsd 0.6.27 1.1.251 x86_64
=Sum: Nokia Connectivity Program
+Des:
<!-- DT:Rich -->
<p>gnokii is a package of programs for communicating with a Nokia cellular phone
in Linux. Please read the READMEs in /usr/share/doc/packages/gnokii
to find out which models are supported.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth 2.28.6 0.1.162 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth-devel 2.28.6 0.1.162 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-bluetooth-lang 2.28.6 0.1.162 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-certauth-devel 0.3 3.21 x86_64
=Sum: Authentification facile par certificat sous GNOME
+Des:
<!-- DT:Rich -->
<p>Gnome Certificate Authentication provides a mechanism for Evolution to authenticate over SSL using certificates.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-control-center-devel 2.28.1 0.6.4 x86_64
=Sum: Header files for the GNOME Control Center
+Des:
<!-- DT:Rich -->
<p>This package contains the control center for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop-devel 2.28.2 0.3.22 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils-devel 0.18.1 1.2.4 x86_64
=Sum: Une coillection d'utilitaires de documentation pour GNOME
+Des:
<!-- DT:Rich -->
<p>The gnome-doc-utils package is a collection of documentation utilities for the GNOME
project.  Notably, it contains utilities for building documentation and
all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp.  Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
</p><p>
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered &quot;final&quot;
(tags with contents that should be put into one &quot;message&quot; in
the POT file), &quot;ignored&quot; (skipped over), and &quot;space preserving&quot;.
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML).  For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-js-common 0.1.1 1.1.44 x86_64
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring-devel 2.28.2 1.1.166 x86_64
=Sum: Gestionnaire de trousseaux de mot de passe GNOME
+Des:
<!-- DT:Rich -->
<p>Le gestionnaire de trousseaux GNOME est un programme qui conserve vos mots de passe et d&#39;autres secrets des usagers.
Il s&#39;exécute comme un démon dans la session, comme au ssh-agent, et d&#39;autres applications peuvent le localiser par une variable d&#39;envionnement.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-libs 1.4.2 11.23 x86_64
=Sum: The GNOME Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic GNOME libraries.
</p><p>
GNOME itself contains no specific window manager.
Many GNOME users like Sawfish, Enlightenment, or
IceWM as a window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: gnome-libs-32bit 1.4.2 11.23 x86_64
=Sum: The GNOME Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic GNOME libraries.
</p><p>
GNOME itself contains no specific window manager.
Many GNOME users like Sawfish, Enlightenment, or
IceWM as a window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: gnome-libs-devel 1.4.2 11.23 x86_64
=Sum: Libraries, etc. to Develop GNOME Applications
+Des:
<!-- DT:Rich -->
<p>Libraries, includes, and more for developing your own GNOME applications or to
compile other GNOME packages.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mag-devel 0.16.0 2.2.38 x86_64
=Sum: Loupe d'écran pour le bureau GNOME
+Des:
<!-- DT:Rich -->
<p>gnome-mag provides a command line interface for stand-alone use,
although its primary goal is to provide a set of magnification
services for use by other client applications and assistive
technologies.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media-devel 2.28.5 1.2.97 x86_64
=Sum: GNOME Multimedia (Media)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des programmes multimédia pour GNOME\t
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus-devel 2.28.0.1 1.1.213 x86_64
=Sum: Menu de bureau GNOME
+Des:
<!-- DT:Rich -->
<p>This package is free software and is part of the GNOME project.
</p><p>
The package contains an implementation of the draft &quot;Desktop Menu Specification&quot; from freedesktop.org:
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Also contained here are the GNOME menu layout configuration files, .directory files, and assorted menu-related utility programs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-devel 2.28.0 2.4.49 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for gnome-panel
+Des:
<!-- DT:Rich -->
<p>Mono bindings for gnome-panel
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot 2.0.16 3.44.68 x86_64
=Sum: Programmes GNOME pour Palm Pilot
+Des:
<!-- DT:Rich -->
<p>gnome-pilot est une collection de programmes et de démons pour la gestion des Palm Pilot&lt;tm&gt; ou d&#39;autres appareils fonctionnant sous PalmOS sous GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot-devel 2.0.16 3.44.68 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-pilot-lang 2.0.16 3.44.68 x86_64
=Sum: Programmes GNOME pour Palm Pilot
+Des:
<!-- DT:Rich -->
<p>gnome-pilot est une collection de programmes et de démons pour la gestion des Palm Pilot&lt;tm&gt; ou d&#39;autres appareils fonctionnant sous PalmOS sous GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-print-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for gnome-print
+Des:
<!-- DT:Rich -->
<p>Mono bindings for gnome-print
</p>
-Des:
##----------------------------------------
=Pkg: gnome-settings-daemon-devel 2.28.2 0.3.11 x86_64
=Sum: Paquetage de développement pour le démon de configuration de GNOME
+Des:
<!-- DT:Rich -->
<p>gnome-settings-daemon provides a daemon run by all GNOME sessions to provide live access to configuration settings and the changes done to them as well as basic services like a clipboard manager, controlling the startup of the screensaver, etc.
</p><p>
This package includes header files used for client applications to contact the settings daemon via its DBus interface.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-sharp2 2.24.0 14.41 x86_64
=Sum: Connecteurs Mono pour GNOME
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les connecteurs Mono pour GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-speech-devel 0.4.25 1.1.214 x86_64
=Sum: GNOME Speech API Development files
+Des:
<!-- DT:Rich -->
<p>The GNOME Speech 1.0 API is currently under development, and it will
provide API for both text-to-speech output as well as speech input.
It will be heavily influenced by the Java Speech API, both the
existing 1.0 specification, and the new 2.0 one which is currently
under development.
</p><p>
This package contains all files needed to develop using the GNOME Speech API
</p>
-Des:
##----------------------------------------
=Pkg: gnome-utils-devel 2.28.3 0.2.85 x86_64
=Sum: Utilitaires de base pour le bureau GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient certains utilitaires essentiels au bureau GNOME 2.x,
comme l&#39;outil de recherche et l&#39;outil résumant l&#39;information sur le système.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs-sharp2 2.24.0 14.41 x86_64
=Sum: Connecteurs Mono pour gnomevfs
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les connecteurs Mono pour gnomevfs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-devel 2.24.2 2.1.172 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2-doc 2.24.2 2.1.172 x86_64
=Sum: Additional Package Documentation for gnome-vfs2
+Des:
<!-- DT:Rich -->
<p>GNOME VFS est le système de fichiers virtuel de GNOME. C&#39;est la base du gestionnaire de fichiers Nautilus. Il fournit une architecture modulaire et est fourni avec plusieurs modules pour le support des systèmes de fichiers, HTTP, FTP et autres.
Il fournit une API basée sur des URI, un sous-système pour la gestion des opérations asynchrones sur les fichiers, une bibliothèque pour la manipulation des types MIME et d&#39;autres fonctions.
</p><p>
Ce paquet contient de la documentation supplémentaire pour le paquet principal.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfsmm 2.26.0 1.1.214 x86_64
=Sum: C++ Wrapper for gnome-vfs
+Des:
<!-- DT:Rich -->
<p>This package is part of the gnomemm project and provides a C++ interface for gnome-vfs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfsmm-devel 2.26.0 1.1.214 x86_64
=Sum: C++ Wrapper for gnome-vfs
+Des:
<!-- DT:Rich -->
<p>This package is part of the gnomemm project and provides a C++ interface for
gnome-vfs.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus 1.1.2 188.43 x86_64
=Sum: Assistive Technologies for Blind and Visually Impaired Users
+Des:
<!-- DT:Rich -->
<p>The gnopernicus project enables users with limited vision or no vision to use the GNOME 2 desktop and GNOME/GTK+-2 applications effectively. By providing automated focus tracking and fullscreen magnification, Gnopernicus aids low-vision GNOME users. Its screen reader features allow low-vision and blind users access to standard GTK+2 and Java-based GUI applications via speech and Braille output. By leveraging GNOME 2&#39;s built-in accessibility framework, Gnopernicus makes interacting with applications more efficient for these users and enables use of the GNOME 2 desktop for some users who otherwise would have no access to GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus-devel 1.1.2 188.43 x86_64
=Sum: Assistive Technologies for Blind and Visually Impaired Users
+Des:
<!-- DT:Rich -->
<p>The gnopernicus project enables users with limited vision or no vision to use the GNOME 2 desktop and GNOME/GTK+-2 applications effectively. By providing automated focus tracking and fullscreen magnification, Gnopernicus aids low-vision GNOME users and its screen reader features allow low-vision and blind users access to standard GTK+2 and Java-based GUI applications via speech and Braille output. By leveraging GNOME 2&#39;s built-in accessibility framework, Gnopernicus makes interacting with applications more efficient for these users and enables use of the GNOME 2 desktop for some users who otherwise would have no access to GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnopernicus-lang 1.1.2 188.43 x86_64
=Sum: Assistive Technologies for Blind and Visually Impaired Users
+Des:
<!-- DT:Rich -->
<p>The gnopernicus project enables users with limited vision or no vision to use the GNOME 2 desktop and GNOME/GTK+-2 applications effectively. By providing automated focus tracking and fullscreen magnification, Gnopernicus aids low-vision GNOME users. Its screen reader features allow low-vision and blind users access to standard GTK+2 and Java-based GUI applications via speech and Braille output. By leveraging GNOME 2&#39;s built-in accessibility framework, Gnopernicus makes interacting with applications more efficient for these users and enables use of the GNOME 2 desktop for some users who otherwise would have no access to GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnu-efi 3.0e 20.28 x86_64
=Sum: Bibliothèque pour les applications EFI
+Des:
<!-- DT:Rich -->
<p>Bibliothèques pour les applications EFI
</p>
-Des:
##----------------------------------------
=Pkg: gnucash 2.2.7 1.35 x86_64
=Sum: Personal Finance Manager
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check book-like register GUI allows you to enter and track bank accounts, stocks, income, and even currency trades. A full set of reports allows you to see the state ofyour finances.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensurebalanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash-devel 2.2.7 1.35 x86_64
=Sum: Personal Finance Manager
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check-book like register GUI
allows you to enter and track bank accounts, stocks, income and even
currency trades. A full set of reports allow you to see the state of
your finances. The interface is designed to be simple and easy to use,
but is backed with double-entry accounting principles to ensure
balanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gnucash-lang 2.2.7 1.35 x86_64
=Sum: Personal Finance Manager
+Des:
<!-- DT:Rich -->
<p>GnuCash is a personal finance manager. A check book-like register GUI allows you to enter and track bank accounts, stocks, income, and even currency trades. A full set of reports allows you to see the state ofyour finances.
The interface is designed to be simple and easy to use, but is backed with double-entry accounting principles to ensurebalanced books.
</p>
-Des:
##----------------------------------------
=Pkg: gob2 2.0.15 1.17 x86_64
=Sum: GOB2, The GObject Builder
+Des:
<!-- DT:Rich -->
<p>GOB is a simple preprocessor for making GObject objects (glib2 objects).
It makes objects from a single file with inline C code so that
you do not have to edit the generated files.  Syntax is somewhat inspired
by Java and yacc.  It supports generating C++ code.
</p>
-Des:
##----------------------------------------
=Pkg: gobject-introspection 0.6.5 1.1.67 x86_64
=Sum: GObject Introspection Tools
+Des:
<!-- DT:Rich -->
<p>The goal of the project is to describe the APIs and collect them in
a uniform, machine readable format.
</p>
-Des:
##----------------------------------------
=Pkg: gobject-introspection-devel 0.6.5 1.1.67 x86_64
=Sum: GObject Introspection Tools
+Des:
<!-- DT:Rich -->
<p>The goal of the project is to describe the APIs and collect them in
a uniform, machine readable format.
</p>
-Des:
##----------------------------------------
=Pkg: goffice 0.7.2 1.32 x86_64
=Sum: Ensemble GLib/GTK+ d'objets et d'utilitaires orientés documents
+Des:
<!-- DT:Rich -->
<p>These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.
These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.<ul>
<li>Plug-ins
</li><li>Load and save documents
</li><li>Undo and redo
</li></ul>
GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p>
-Des:
##----------------------------------------
=Pkg: goffice-devel 0.7.2 1.32 x86_64
=Sum: Development files for goffice
+Des:
<!-- DT:Rich -->
<p>GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p><p>
This package contains files needed to develop applications using goffice.
</p>
-Des:
##----------------------------------------
=Pkg: goffice-lang 0.7.2 1.32 x86_64
=Sum: Ensemble GLib/GTK+ d'objets et d'utilitaires orientés documents
+Des:
<!-- DT:Rich -->
<p>These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.
These are common operations for document-centric applications that are conceptually simple, but complex to implement fully.<ul>
<li>Plug-ins
</li><li>Load and save documents
</li><li>Undo and redo
</li></ul>
GOffice is a GLib/GTK+ set of document-centric objects and utilities.
</p>
-Des:
##----------------------------------------
=Pkg: goocanvas 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: goocanvas-devel 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: goocanvas-lang 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: goom2k4 0 82.32 x86_64
=Sum: Programmes et bibliothèque pour les effets visuels
+Des:
<!-- DT:Rich -->
<p>Goom is a visual effects generator for mp3 players.
</p>
-Des:
##----------------------------------------
=Pkg: goom2k4-devel 0 82.32 x86_64
=Sum: Programmes et bibliothèque pour les effets visuels
+Des:
<!-- DT:Rich -->
<p>Goom is a visual effects generator for mp3 players.
</p>
-Des:
##----------------------------------------
=Pkg: gperf 3.0.2 2.8 x86_64
=Sum: A Compiler Tool for Generating Perfect Hash Functions
+Des:
<!-- DT:Rich -->
<p>A perfect hash function is simply:
a hash function and a data structure that allows
recognition of a key word in a set of words using
exactly one probe into the data structure.
</p>
-Des:
##----------------------------------------
=Pkg: gpsd 2.37 71.7.47 x86_64
=Sum: Service permettant l'accès à un capteur GPS
+Des:
<!-- DT:Rich -->
<p>gpsd is a service daemon that mediates access to a GPS sensor
connected to the host computer by serial or USB interface, making its
data on the location/course/velocity of the sensor available to be
queried on TCP port 2947 of the host computer.  With gpsd, multiple
GPS client applications (such as navigational and wardriving software)
can share access to a GPS without contention or loss of data.  Also,
gpsd responds to queries with a format that is substantially easier to
parse than NMEA 0183.  A client library is provided for applications.
</p><p>
After installing this RPM, gpsd will automatically connect to USB
GPSes when they are plugged in and requires no configuration.  For
serial GPSes, you will need to start gpsd by hand.  Once connected,
the daemon automatically discovers the correct baudrate, stop bits,
and protocol. The daemon will be quiescent when there are no
clients asking for location information, and copes gracefully when the
GPS is unplugged and replugged.
</p>
-Des:
##----------------------------------------
=Pkg: gpsd-devel 2.37 71.7.47 x86_64
=Sum: Bibliothèques en C et en Pyhton pour dialoguer avec le service gpsd ou un GPS
+Des:
<!-- DT:Rich -->
<p>This package provides C header files for the gpsd shared libraries
that manage access to a GPS for applications; also Python modules.
You will need to have gpsd installed for it to work.
</p>
-Des:
##----------------------------------------
=Pkg: gq 1.2.3 1.28 x86_64
=Sum: An LDAP Client for GTK
+Des:
<!-- DT:Rich -->
<p>An LDAP client for GTK.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz-devel 2.20.2 6.19 x86_64
=Sum: Paquetage de déloppement pour Graphviz
+Des:
<!-- DT:Rich -->
<p>Le paquet graphviz-devel contient ce qui est nécessaire pour le développement de programmes qui utilisent les bibliothèques graphviz. Inclut aussi les pages man3.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Ce paquet est distribué sous licence spéciale d&#39;AT&amp;T research.
Veuillez lire
/usr/share/doc/packages/graphviz/graphviz.license
et les documents cités à l&#39;intérieur avant d&#39;utiliser ce logiciel.
</p>
-Ins:
##----------------------------------------
=Pkg: graphviz-python 2.20.2 6.33 x86_64
=Sum: Python Extension for Graphviz
+Des:
<!-- DT:Rich -->
<p>The graphviz-python package contains the Python extension for the graphviz tools.
</p>
-Des:
##----------------------------------------
=Pkg: gsf-sharp 0.8.1 2.30 x86_64
=Sum: Connecteurs Mono pour libgsf
+Des:
<!-- DT:Rich -->
<p>Mono bindings for libgsf.
</p>
-Des:
##----------------------------------------
=Pkg: gsl 1.11 1.30 x86_64
=Sum: Bibliothèque scientifique GNU
+Des:
<!-- DT:Rich -->
<p>The GNU Scientific Library (GSL) is a collection of routines for numerical
computing. The routines are written from scratch by the GSL team in ANSI C and
present a modern Applications Programming Interface (API) for C programmers,
while allowing wrappers to be written for very high level languages.
</p><p>
The library covers the following areas:
</p><p>
Complex Numbers           Roots of Polynomials   Special Functions
Vectors and Matrices      Permutations           Sorting
BLAS Support              Linear Algebra         Eigensystems
Fast Fourier Transforms   Quadrature             Random Numbers
Quasi-Random Sequences    Random Distributions   Statistics
Histograms                N-Tuples               Monte Carlo
Integration
Simulated Annealing       Differential Equations Interpolation
Numerical Differentiation Chebyshev              Series Acceleration
Approximation
Discrete Hankel           Root-Finding           Minimization
Transforms
Least-Squares Fitting     Physical Constants     IEEE Floating-Point
</p>
-Des:
##----------------------------------------
=Pkg: gsl-devel 1.11 1.30 x86_64
=Sum: Bibliothèque scientifique GNU - fichiers de développement
+Des:
<!-- DT:Rich -->
<p>This package contains the headers, static libraries and some documentation
for GSL.
</p><p>
The GNU Scientific Library (GSL) is a collection of routines for numerical
computing. The routines are written from scratch by the GSL team in ANSI C, and present a modern Applications Programming Interface (API) for C
programmers, while allowing wrappers to be written for very high level
languages.
</p><p>
The library covers the following areas,
</p><p>
Complex Numbers           Roots of Polynomials   Special Functions
Vectors and Matrices      Permutations           Sorting
BLAS Support              Linear Algebra         Eigensystems
Fast Fourier Transforms   Quadrature             Random Numbers
Quasi-Random Sequences    Random Distributions   Statistics
Histograms                N-Tuples               Monte Carlo
Integration
Simulated Annealing       Differential Equations Interpolation
Numerical Differentiation Chebyshev              Series Acceleration
Approximation
Discrete Hankel           Root-Finding           Minimization
Transforms
Least-Squares Fitting     Physical Constants     IEEE Floating-Point
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-32bit 0.10.25 3.1.46 x86_64
=Sum: Streaming-Media Framework Runtime
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming-media framework, based on graphs of filters which
operate on media data. Applications using this library can do anything
from real-time sound processing to playing videos, and just about anything
else media-related.  Its plug-in-based architecture means that new data
types or processing capabilities can be added by installing new
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-devel 0.10.25 3.1.46 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-doc 0.10.25 3.1.45 x86_64
=Sum: Streaming-Media Framework Runtime: Documentation for Developers
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming-media framework, based on graphs of filters which
operate on media data. Applications using this library can do anything
from real-time sound processing to playing videos, and just about anything
else media-related.  Its plug-in-based architecture means that new data
types or processing capabilities can be added by installing new
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-base-devel 0.10.25 1.1.133 x86_64
=Sum: Include files and libraries mandatory for development with gstreamer-0_10-plugins-base
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications that use gstreamer-0_10-plugins-base.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-farsight 0.12.11 1.1.158 x86_64
=Sum: Gstreamer plugins for farsight
+Des:
<!-- DT:Rich -->
<p>Gstreamer plugins for farsight
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-utils 0.10.25 3.1.46 x86_64
=Sum: Streaming-Media Framework Runtime
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming-media framework, based on graphs of filters which
operate on media data. Applications using this library can do anything
from real-time sound processing to playing videos, and just about anything
else media-related.  Its plug-in-based architecture means that new data
types or processing capabilities can be added by installing new
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gtk 1.2.10 1084.19 x86_64
=Sum: A Library for the Creation of Graphical User Interfaces
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-32bit 1.2.10 1084.19 x86_64
=Sum: A Library for the Creation of Graphical User Interfaces
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-devel 1.2.10 1084.19 x86_64
=Sum: Fichiers de développement pour la boîte à outils GIMP.
+Des:
<!-- DT:Rich -->
<p>All the files necessary to start your own GTK development.
Also see the <a href="pkg://gtk">gtk</a> package.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-lang 1.2.10 1084.19 x86_64
=Sum: A Library for the Creation of Graphical User Interfaces
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library was used all over the world for all
GNOME applications, the GIMP, and several others. Originally it was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used GTK1 have since switched to <a href="pkg://gtk2"> GTK2</a>.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
Thus, some applications for which GTK1 is sufficient, still to use GTK1.
GTK1 remains faster and less complex than GTK2. To develop applications with gtk, you need the package <a href="pkg://gtk-devel">gtk-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-complete 2.12.9 22.4.23 x86_64
=Sum: Connecteurs Mono pour GNOME et GTK+ (paquet virtuel)
+Des:
<!-- DT:Rich -->
<p>Gtk# is a library that allows you to build fully native graphical GNOME applications using Mono. Gtk# is a binding to GTK+, the cross platform user interface toolkit used in GNOME. It includes bindings for Gtk, Atk, Pango, Gdk, libgnome, libgnomeui and libgnomecanvas.  (Virtual package which depends on all gtk-sharp2 subpackages)
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-doc 2.12.9 22.4.23 x86_64
=Sum: Documentation monodoc pour gtk-sharp2
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient la documentation gtk-sharp2 pour monodoc
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2-gapi 2.12.9 22.4.23 x86_64
=Sum: C Source Parser and C Generator
+Des:
<!-- DT:Rich -->
<p>The gtk-sharp-gapi package includes the parser and code generator used by the GTK if you want to bind GObject-based libraries, or need to compile a project that uses it to bind such a library.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-vnc-devel 0.3.9 1.1.215 x86_64
=Sum: Bibliothèques, fichiers d'entête pour compiler avec la bibliothèque gtk-vnc
+Des:
<!-- DT:Rich -->
<p>Development files for using the gtk-vnc library
</p>
-Des:
##----------------------------------------
=Pkg: gtk1-compat-devel 0.10 2.26 x86_64
=Sum: Compatibility Wrappers for Old Versions of GLib, GTK+, GDK-Pixbuf and libglade
+Des:
<!-- DT:Rich -->
<p>Wrapper headers, M4 macros, config scripts and library symlinks, which simulate presence of GLib1, GTK+1, GDK-Pixbuf1, libglade1 development packages, but tries to use GLib2, GTK+2 and libglade2.
</p><p>
Using it, you can force linking of some old applications with new libraries without any effort.
</p><p>
Package also provides gtk1-compat-autofix script, which does some source code modifications, which cannot be worked around by any other way, and a static library with some obsolete functions.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2-devel 2.18.9 0.4.1 x86_64
=Sum: Development environment for the Gtk2 GUI library
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries, configuration files and development tools needed to compile and link applications using the <a href="pkg://gtk2">gtk2</a> library.
</p><p>
In addition, it contains a large set of demo applications in source code and manual pages for the provided Gtk2 development tools.
</p><p>
Gtk2 is a fast and versatile library is used all over the world for all
GNOME applications, the GIMP, and several other applications. Originally it was
written for the GIMP and hence has the name Gimp ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p>
-Des:
##----------------------------------------
=Pkg: gtkglext-32bit 1.2.0 139.25 x86_64
=Sum: Extension OpenGL pour GTK
+Des:
<!-- DT:Rich -->
<p>GtkGLExt is an OpenGL extension to GTK. It provides the GDK objects that support OpenGL rendering in GTK and GtkWidget API add-ons, to make GTK+ widgets OpenGL-capable.
</p>
-Des:
##----------------------------------------
=Pkg: gtkglext-devel 1.2.0 139.25 x86_64
=Sum: Extension OpenGL pour GTK
+Des:
<!-- DT:Rich -->
<p>GtkGLExt est une extension OpenGL pour GTK. Il fournit des objets GDK qui permettent le rendu OpenGL dans GTK et des extentions à l&#39;API GtkWidget  pour la fabrication de widgets GTK+ utilisant OpenGL
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2-devel 3.28.2 0.6.8 x86_64
=Sum: Inclue les fichier et bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml314-sharp 2.26.0 2.2.7 x86_64
=Sum: Connecteurs Mono pour gtkhtml
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les connecteurs Mono pour gtkhtml.
</p>
-Des:
##----------------------------------------
=Pkg: gtkiterm 0.5.20040304 259.27 x86_64
=Sum: Internationalized Terminal Emulator for GTK
+Des:
<!-- DT:Rich -->
<p>An internationalized terminal emulator for GTK.
</p>
-Des:
##----------------------------------------
=Pkg: gtkmm2-devel 2.18.2 1.1.279 x86_64
=Sum: Interface C++ pour GTK2
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps GTK+ 2.
Highlights include typesafe callbacks, widgets extensible via inheritance
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-devel 2.8.2 0.1.195 x86_64
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard GTK+ 2.x
text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview-doc 2.8.2 0.1.195 x86_64
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package&#39;s base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview18-devel 1.8.5 29.26 x86_64
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard GTK+ 2.x
text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtkspell-devel 2.0.14 17.32 x86_64
=Sum: Bibliothèques statiques et fichiers d'entête pour gtkspell
+Des:
<!-- DT:Rich -->
<p>Bibliothèques statiques et fichiers d&#39;entête pour gtkspell
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap-devel 2.28.2 0.1.152 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: guile-devel 1.8.5 22.16 x86_64
=Sum: GNU's Ubiquitous Intelligent Language for Extension
+Des:
<!-- DT:Rich -->
<p>This is Guile, a portable, embeddable Scheme implementation written in C.
Guile provides a machine independent execution platform that can be
linked in as a library when building extensible programs.
</p>
-Des:
##----------------------------------------
=Pkg: gutenprint-devel 5.0.2 2.31 x86_64
=Sum: Environnement de développement pour Gutenprint
+Des:
<!-- DT:Rich -->
<p>This package contains the development environment for the gutenprint printer drivers.
</p>
-Des:
##----------------------------------------
=Pkg: gv 3.6.3 1.20 x86_64
=Sum: A Program to View PostScript Files
+Des:
<!-- DT:Rich -->
<p>GV offers you an X Window System GUI for viewing PostScript files.
This is an X Window System interface to ghostscript.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs-devel 1.4.3 0.3.13 x86_64
=Sum: Fonctionnalité VFS pour GLib
+Des:
<!-- DT:Rich -->
<p>Fonctionnalité VFS pour GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gwenhywfar 2.6.2 34.32 x86_64
=Sum: A Multiplatform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows.
It also includes some often needed
functions (for example, handling and parsing of configuration files, reading and writingof XML files, and interprocess communication).
It is used by OpenHBCI2,Libchipcard2, Simthetic, AqBanking, and QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: gwenhywfar-devel 2.6.2 34.32 x86_64
=Sum: A Multi-Platform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows.  It also includes some often needed
functions (e.g. for handling and parsing of configuration files, reading/writing
of XML files, interprocess communication etc). It is used by: OpenHBCI2,
Libchipcard2, Simthetic, AqBanking, QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: gxmhtml 1.4.2 11.23 x86_64
=Sum: Gtk-XMHTML
+Des:
<!-- DT:Rich -->
<p>Gtk-XMHTML is a GTK component for visualizing HTML.
</p>
-Des:
##----------------------------------------
=Pkg: hal-devel 0.5.12 23.40.5 x86_64
=Sum: Developer package for HAL
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both physical devices (such as PCI, USB) and the device classes (such as input, net and block) physical devices have, and it allows merging of information from so called device info files specific to a device.
</p><p>
HAL provides a network API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices, presently ethernet link detection and volume mounts are monitored.
</p><p>
This, and more, is all described in the HAL specification
</p>
-Des:
##----------------------------------------
=Pkg: help2man 1.36.4 2.29 x86_64
=Sum: Create Simple Man Pages from --help Output
+Des:
<!-- DT:Rich -->
<p>help2man is a script to create simple man pages from the --help and --version output of programs.
</p><p>
Since most GNU documentation is now in info format, this provides a way to generate a placeholder man page pointing to that resource while still providing some useful information.
</p>
-Des:
##----------------------------------------
=Pkg: hex 1.4 125.8 x86_64
=Sum: Yet Another Hex Dumper
+Des:
<!-- DT:Rich -->
<p>A hex dumper that does CP/M and EBCDIC formatting and has internationalization support.
</p>
-Des:
##----------------------------------------
=Pkg: hfsutils 3.2.6 1139.17 x86_64
=Sum: Tools Used for the Macintosh's Hierarchical File System
+Des:
<!-- DT:Rich -->
<p>HFS is the Hierarchical File System used on modern Macintosh computers.
With this package, you can read and write Macintosh-formatted media, such as
floppy disks, CD-ROMs, and SCSI hard disks on most UNIX platforms. You can
also format raw media into an HFS volume.
</p>
-Des:
##----------------------------------------
=Pkg: htdig-devel 3.2.0b6 133.18 x86_64
=Sum: Development files for htdig
+Des:
<!-- DT:Rich -->
<p>The ht://Dig system is a complete World Wide Web index and search
system for a small domain or intranet. This system is not meant to replace
the need for powerful Internet-wide search systems like Lycos, Infoseek,
Webcrawler, or AltaVista. Instead it is meant to cover the search needs
of a single company, campus, or even a particular subsection of a Web
site.
</p><p>
This package is needed if you want to develop other applications on htdig.
</p>
-Des:
##----------------------------------------
=Pkg: html2text 1.3.2a 47.8 x86_64
=Sum: HTML to ASCII Converter
+Des:
<!-- DT:Rich -->
<p>A tool for converting from HTML to ASCII. It can reasonably handle tables.
</p>
-Des:
##----------------------------------------
=Pkg: hunspell-devel 1.2.7 1.16 x86_64
=Sum: Files for developing with hunspell
+Des:
<!-- DT:Rich -->
<p>Includes and definitions for developing with hunspell.
</p>
-Des:
##----------------------------------------
=Pkg: hwinfo-devel 15.33 0.2.19 x86_64
=Sum: Hardware Detection Library
+Des:
<!-- DT:Rich -->
<p>This library collects information about the hardware installed on a system.
</p>
-Des:
##----------------------------------------
=Pkg: i2c-tools 3.0.1 39.19 x86_64
=Sum: A heterogeneous set of I2C tools for Linux
+Des:
<!-- DT:Rich -->
<p>This package contains a heterogeneous set of I2C tools for Linux: a bus probing tool, a chip dumper, register-level access helpers, EEPROM decoding scripts, and more.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-vbox 2008.12.10 1.26 x86_64
=Sum: A Voice Answering Machine for isdn4linux
+Des:
<!-- DT:Rich -->
<p>i4l-vbox is a voice answering machine for isdn4linux.
It is a collection of tools for answering phone calls, recording messages via an ISDN card, and replaying recorded messages.
It is also possible to send the recorded messages to an email account.
The recording and playing of messages on the phone line is controlled via a
Tcl script, and it is possible to control additional functions via touch-tone.
The calling number can be used to select between various messages.
The answering machine configuration is controlled by a number of
variable configuration files.
</p>
-Des:
##----------------------------------------
=Pkg: ibutils 1.2 97.2.6 x86_64
=Sum: OpenIB Mellanox InfiniBand Diagnostic Tools
+Des:
<!-- DT:Rich -->
<p>ibutils provides IB network and path diagnostics.
</p>
-Des:
##----------------------------------------
=Pkg: ibutils-32bit 1.2 97.2.6 x86_64
=Sum: OpenIB Mellanox InfiniBand Diagnostic Tools
+Des:
<!-- DT:Rich -->
<p>ibutils provides IB network and path diagnostics.
</p>
-Des:
##----------------------------------------
=Pkg: ibutils-devel 1.2 97.2.6 x86_64
=Sum: OpenIB Mellanox InfiniBand Diagnostic Tools
+Des:
<!-- DT:Rich -->
<p>ibutils provides IB network and path diagnostics.
</p>
-Des:
##----------------------------------------
=Pkg: ibutils-devel-32bit 1.2 97.2.6 x86_64
=Sum: OpenIB Mellanox InfiniBand Diagnostic Tools
+Des:
<!-- DT:Rich -->
<p>ibutils provides IB network and path diagnostics.
</p>
-Des:
##----------------------------------------
=Pkg: icecream 0.9.2 1.22 x86_64
=Sum: For Distributed Compile in the Network
+Des:
<!-- DT:Rich -->
<p>icecream is the next generation distcc.
</p>
-Des:
##----------------------------------------
=Pkg: icecream-monitor 1.0 188.30 x86_64
=Sum: Monitor Program for the icecream Compile Farm
+Des:
<!-- DT:Rich -->
<p>icecream is the next generation distcc.
This package provides a monitor program.
</p>
-Des:
##----------------------------------------
=Pkg: icmpinfo 1.11 691.22 x86_64
=Sum: A Tool for Looking at ICMP Messages
+Des:
<!-- DT:Rich -->
<p>A tool for looking at the ICMP messages received on
the running host.
</p>
-Des:
##----------------------------------------
=Pkg: icu 4.0 7.24.11 x86_64
=Sum: International Components for Unicode
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode and locale support. The library provides
calendar support, conversions for many character sets, language
sensitive collation, date and time formatting, support for many
locales, message catalogs and resources, message formatting,
normalization, number and currency formatting, time zone support,
transliteration, and word, line, and sentence breaking, etc.
</p><p>
This package contains the Unicode character database and derived
properties along with converters and time zone data.
</p><p>
This package contains the runtime libraries for ICU. It does not contain any of the data files needed at runtime and present in the
icu and icu-locales packages.
</p>
-Des:
##----------------------------------------
=Pkg: id3lib 3.8.3 175.15 x86_64
=Sum: A Library for Manipulating ID3v1 and ID3v2 tags
+Des:
<!-- DT:Rich -->
<p>This package provides a software library for manipulating ID3v1 and ID3v2
tags.
It provides a convenient interface for software developers to include
standards-compliant ID3v1/2 tagging capabilities in their applications.
Features include identification of valid tags, automatic size conversions,
synchronization and resynchronization of tag frames, seamless tag compression
and decompression, and optional padding facilities.
</p>
-Des:
##----------------------------------------
=Pkg: id3lib-devel 3.8.3 175.15 x86_64
=Sum: Documentation and Headers for id3lib
+Des:
<!-- DT:Rich -->
<p>This package contains the headers and documentation for the id3lib API that
programmers will need to develop applications which use id3lib,
the software library for ID3v1 and ID3v2 tag manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: imap 2006c1_suse 68.8 x86_64
=Sum: IMAP4, POP2, and POP3 Mail Server
+Des:
<!-- DT:Rich -->
<p>This package contains IMAP4, POP2, and POP3 mail servers.
</p><p>
After installation, activate the servers in
the file /etc/inetd.conf.
</p>
-Des:
##----------------------------------------
=Pkg: imap-devel 2006c1_suse 68.8 x86_64
=Sum: IMAP4rev1/c-client Development Environment
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries and header files
for IMAP client programs.
</p>
-Des:
##----------------------------------------
=Pkg: imap-lib 2006c1_suse 68.8 x86_64
=Sum: IMAP4rev1/c-client Development Environment
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries for IMAP client programs.
</p>
-Des:
##----------------------------------------
=Pkg: imlib 1.9.14 401.20 x86_64
=Sum: A Shared Library for Loading and Rendering 3D Images
+Des:
<!-- DT:Rich -->
<p>This is a general, all-purpose image loading and rendering (image data
to screen data) library. Imlib is currently capable of loading 25
different image formats.
</p><p>
See the file /usr/include/X11/imlib.h or directory
/usr/share/doc/packages/imlib for more details.
</p><p>
This shared library is needed for the Enlightenment window manager and
for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: imlib-32bit 1.9.14 401.20 x86_64
=Sum: A Shared Library for Loading and Rendering 3D Images
+Des:
<!-- DT:Rich -->
<p>This is a general, all-purpose image loading and rendering (image data
to screen data) library. Imlib is currently capable of loading 25
different image formats.
</p><p>
See the file /usr/include/X11/imlib.h or directory
/usr/share/doc/packages/imlib for more details.
</p><p>
This shared library is needed for the Enlightenment window manager and
for GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: imlib-config 1.9.14 401.20 x86_64
=Sum: Configuration Tool for imlib
+Des:
<!-- DT:Rich -->
<p>A graphical front-end for configuring &#39;imlib&#39; (imlib-config).
</p>
-Des:
##----------------------------------------
=Pkg: imlib-devel 1.9.14 401.20 x86_64
=Sum: Imlib Development Environment
+Des:
<!-- DT:Rich -->
<p>This package is required for developing programs linked against
Imlib or for compiling GNOME packages.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2 1.4.2 2.18.53 x86_64
=Sum: Image handling and conversion library.
+Des:
<!-- DT:Rich -->
<p>Imlib2 is an advanced replacement library for libraries like libXpm that
provides many more features with much greater flexibility and speed than
standard libraries, including font rasterization, rotation, RGBA space
rendering and blending, dynamic binary filters, scripting, and more.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-devel 1.4.2 2.18.53 x86_64
=Sum: Imlib 2 - development libraries
+Des:
<!-- DT:Rich -->
<p>These are the development headers and library for imlib2.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-filters 1.4.2 2.18.53 x86_64
=Sum: Imlib 2 - plugin filters
+Des:
<!-- DT:Rich -->
<p>This package has the basic set of plugin filters that come with Imlib2.
</p>
-Des:
##----------------------------------------
=Pkg: imlib2-loaders 1.4.2 2.18.53 x86_64
=Sum: Imlib 2 - image loaders
+Des:
<!-- DT:Rich -->
<p>This package contains the imlib2 image loaders for: argb, bmp, gif, jpeg, png, pnm, tga, tiff, xpm
</p>
-Des:
##----------------------------------------
=Pkg: indent 2.2.10 1.21 x86_64
=Sum: Indent Formats C Source Code
+Des:
<!-- DT:Rich -->
<p>indent can be used to make code easier to read. It can
also convert from one style of writing C code to another.
indent understands a substantial amount of C syntax,
but it also tries to cope with incomplete and malformed syntax.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program
+Des:
<!-- DT:Rich -->
<p>Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-dia 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Dia Import Extension
+Des:
<!-- DT:Rich -->
<p>Dia import extension for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-extra 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Extra Extensions
+Des:
<!-- DT:Rich -->
<p>Extra extensions for Inkscape. Recommended for everybody who wants to use Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-fig 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - Fig Import Extension
+Des:
<!-- DT:Rich -->
<p>Fig family (XFig, Figurine, JFig, WinFig,...) import extension for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-extensions-gimp 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program - The GIMP Extensions
+Des:
<!-- DT:Rich -->
<p>The GIMP import and export extensions for Inkscape.
</p><p>
Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inkscape-lang 0.46 62.36.10 x86_64
=Sum: Inkscape Vector Illustration Program
+Des:
<!-- DT:Rich -->
<p>Inkscape is a vector illustration program for the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: inn 2.4.2 170.19 x86_64
=Sum: InterNetNews
+Des:
<!-- DT:Rich -->
<p>Rich Salz&#39;s InterNetNews news transport system.
</p>
-Des:
##----------------------------------------
=Pkg: inn-devel 2.4.2 170.19 x86_64
=Sum: InterNetNews development files
+Des:
<!-- DT:Rich -->
<p>Rich Salz&#39;s InterNetNews news transport system.
</p><p>
This package contains the files needed to develop software depending on inn.
</p>
-Des:
##----------------------------------------
=Pkg: ipod-sharp 0.8.3 0.1.143 x86_64
=Sum: Library for Interacting with Apple iPod® Devices
+Des:
<!-- DT:Rich -->
<p>ipod-sharp is a library that allows manipulation of the iTunesDB used in
Apple iPod® devices.  Currently it supports adding and removing songs and
manipulating existing play lists.
</p>
-Des:
##----------------------------------------
=Pkg: iprutils 2.2.20 0.2.8 x86_64
=Sum: Utilities for the IBM Power Linux RAID Adapters
+Des:
<!-- DT:Rich -->
<p>Provides a suite of utilities to manage and configure SCSI devices
supported by the ipr SCSI storage device driver.
</p>
-Des:
##----------------------------------------
=Pkg: iptables-devel 1.4.6 2.2.24 x86_64
=Sum: Libraries, Headers and Development Man Pages for libipq
+Des:
<!-- DT:Rich -->
<p>These libraries are needed to compile programs against libipq.
</p>
-Des:
##----------------------------------------
=Pkg: ispell 3.3.02 2.7 x86_64
=Sum: A Spell Checker
+Des:
<!-- DT:Rich -->
<p>Ispell is a fast, screen-oriented spell checker that shows you your
errors in the context of the original file and suggests possible
corrections when it can figure them out.  Compared to UNIX spell, it
is faster and much easier to use.  Ispell can also handle languages
other than English.  Ispell has a long history and many people have
contributed to the current version--some of the major contributors
include R. E. Gorin, Pace Willisson, Walt Buehring, and Geoff
Kuenning.
</p><p>
You can find a short description in the directory /usr/share/doc/packages/ispell/.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-american 3.3.02 2.7 x86_64
=Sum: American ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This package includes a ready American dictionary for ispell. If you install
ispell-british too, check /etc/sysconfig/ispell to see which one the
default English dictionary will be. A short usage description is given
in /usr/share/doc/packages/ispell/README.
The sources for this dictionary are included in the source package of ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-brazilian 1.5 364.7 x86_64
=Sum: Brazilian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready brazilian dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-british 3.3.02 2.7 x86_64
=Sum: British ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready British dictionary for ispell. If you install
ispell-american too, check /etc/sysconfig/ispell to see which one will be
the default English dictionary. A short usage description is given in
/usr/share/doc/packages/ispell/README.
The sources for this dictionary are included in the source package of ispell.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-czech 1.5 364.7 x86_64
=Sum: Czech ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready czech dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-danish 1.5 364.7 x86_64
=Sum: Danish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready danish dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-finnish 1.5 364.7 x86_64
=Sum: Finnish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready finnish dictionary for ispell. A short
usage description is given in /usr/share/doc/packages/ispell/README of
the packages ispell. The sources for this dictionary are included in
the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-french 1.5 364.7 x86_64
=Sum: French ispell dictionary
+Des:
<!-- DT:Rich -->
<p>/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-german 1.5 364.7 x86_64
=Sum: German ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready German dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-hungarian 1.3 5.7 x86_64
=Sum: Hungarian Ispell Dictionary
+Des:
<!-- DT:Rich -->
<p>Hungarian ispell dictionary.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-italian 1.5 364.7 x86_64
=Sum: Italian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready italian dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-ngerman 1.5 364.7 x86_64
=Sum: New German ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready german dictionary for ispell according
the new spelling rules.  The name of the dictonary is german to be
able to distinguish it from those of the package igerman.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-norsk 1.5 364.7 x86_64
=Sum: Norwegian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready norwegian  dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-polish 1.5 364.7 x86_64
=Sum: Polish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready polish dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-portuguese 1.5 364.7 x86_64
=Sum: Portuguese ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready portuguese dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-russian 1.5 364.7 x86_64
=Sum: Russian ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready russian dictionary for ispell.
A short usage description is given in /usr/share/doc/packages/ispell/README
of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-slovak 0.3.2 2.7 x86_64
=Sum: Slovak Ispell Dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready Slovak dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-spanish 1.5 364.7 x86_64
=Sum: Spanish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready spanish dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: ispell-swedish 1.5 364.7 x86_64
=Sum: Swedish ispell dictionary
+Des:
<!-- DT:Rich -->
<p>This packages includes a ready swedish dictionary for ispell.
A short usage description for ispell is given in
/usr/share/doc/packages/ispell/README of the packages ispell.
The sources for this dictionary are included in the package dicts.
</p>
-Des:
##----------------------------------------
=Pkg: itcl 3.4 41.22 x86_64
=Sum: Object Oriented Extension for Tcl
+Des:
<!-- DT:Rich -->
<p>Incr Tcl adds object-oriented programming facilities to Tcl.  It was
NOT designed as another whiz-bang, object-oriented programming
language. It is patterned somewhat after C++.  It was designed to
support more structured programming in Tcl.  Scripts that grow beyond a
few thousand lines become extremely difficult to maintain. [incr Tcl]
attacks this problem in the same way that any object- oriented
programming language would, by providing mechanisms for data
encapsulation behind well-defined interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: itcl-32bit 3.4 41.22 x86_64
=Sum: Object Oriented Extension for Tcl
+Des:
<!-- DT:Rich -->
<p>Incr Tcl adds object-oriented programming facilities to Tcl.  It was
NOT designed as another whiz-bang, object-oriented programming
language. It is patterned somewhat after C++.  It was designed to
support more structured programming in Tcl.  Scripts that grow beyond a
few thousand lines become extremely difficult to maintain. [incr Tcl]
attacks this problem in the same way that any object- oriented
programming language would, by providing mechanisms for data
encapsulation behind well-defined interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: itcl-devel 3.4 41.22 x86_64
=Sum: Header Files and C API Documentation for Itcl
+Des:
<!-- DT:Rich -->
<p>Incr Tcl adds object-oriented programming facilities to Tcl.
</p><p>
This package contains header files and documentation needed to
access [Incr Tcl] from C code. Tcl scripts that use [Incr Tcl]
do not need this package.
</p>
-Des:
##----------------------------------------
=Pkg: jack 0.109.2 65.16 x86_64
=Sum: Jack Audio Connection Kit
+Des:
<!-- DT:Rich -->
<p>JACK is a low-latency audio server written primarily for the Linux operating system. It can connect a number of different applications to an audio device, as well as allow them to share audio between themselves. Its clients can run in their own processes (as a normal application), or they can run within a JACK server (as a plug-in).
</p>
-Des:
##----------------------------------------
=Pkg: jack-32bit 0.109.2 65.16 x86_64
=Sum: Jack Audio Connection Kit
+Des:
<!-- DT:Rich -->
<p>JACK is a low-latency audio server written primarily for the Linux operating system. It can connect a number of different applications to an audio device, as well as allow them to share audio between themselves. Its clients can run in their own processes (as a normal application), or they can run within a JACK server (as a plug-in).
</p>
-Des:
##----------------------------------------
=Pkg: java-1_4_2-ibm 1.4.2_sr13.3 1.1.1 x86_64
=Sum: IBM(R) Runtime Environment for Linux, Java(TM) 2 Technology Edition
+Des:
<!-- DT:Rich -->
<p>The Java(TM) 2 Runtime Environment contains the Java virtual machine,
runtime class libraries, and Java application launcher that are
necessary to run programs written in the Java progamming language.
It is not a development environment and does not contain development
tools such as compilers and debuggers.  For development tools, see the
java-1.4.2-ibm-devel package.
</p><p>
The Java 2 Runtime Environment is intended for software developers
and vendors who wish to redistribute their applications.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_4_2-ibm-devel 1.4.2_sr13.3 1.1.1 x86_64
=Sum: IBM(R) Developer Kit for Linux, Java(TM) 2 Technology Edition
+Des:
<!-- DT:Rich -->
<p>The Developer Kit for Linux is a development environment for writing applets
and applications that conform to Sun Microsystems Java Core Application
Programming Interface (API).
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-gcj-compat 1.5.0.0 103.26 x86_64
=Sum: JPackage Runtime Scripts for GCJ
+Des:
<!-- DT:Rich -->
<p>This package contains shell scripts and symbolic links to simulate a
JPackage Java runtime environment with GCJ.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_5_0-gcj-compat-devel 1.5.0.0 103.26 x86_64
=Sum: JPackage development scripts for GCJ
+Des:
<!-- DT:Rich -->
<p>This package contains shell scripts and symbolic links to simulate a
JPackage Java development environment with GCJ.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-ibm 1.6.0_sr7.0 1.6.21 x86_64
=Sum: Java(TM) 6 Runtime Environment
+Des:
<!-- DT:Rich -->
<p>Java(TM) 6 Runtime Environment
</p><p>
The Java(TM) 6 Runtime Environment contains the Java virtual machine, runtime class libraries, and Java application launcher that are necessary to run programs written in the Java progamming language. It is not a development environment and does not contain development tools such as compilers and debuggers. For development tools, see the java-1.6.0-ibm-devel package.
</p><p>
The Java 6 Runtime Environment is intended for software developers and vendors who wish to redistribute their applications.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-ibm-devel 1.6.0_sr7.0 1.6.21 x86_64
=Sum: Java(TM) 6 SDK, Standard Edition
+Des:
<!-- DT:Rich -->
<p>The Java 6 SDK is a development environment for building applications, applets, and components using the Java programming language.
</p><p>
The Java 6 SDK includes tools useful for developing and testing programs written in the Java programming language and running on the Java platform. These tools are designed to be used from the command line. Except for the appletviewer, these tools do not provide a graphical user interface.
</p>
-Des:
##----------------------------------------
=Pkg: java-1_6_0-ibm-fonts 1.6.0_sr7.0 1.6.21 x86_64
=Sum: Java(TM) 2 Runtime Environment
+Des:
<!-- DT:Rich -->
<p>Java(TM) 2 Runtime Environment
</p><p>
The Java(TM) 2 Runtime Environment contains the Java virtual machine, runtime class libraries, and Java application launcher that are necessary to run programs written in the Java progamming language. It is not a development environment and does not contain development tools such as compilers and debuggers. For development tools, see the Java 2 SDK, Standard Edition.
</p><p>
The Java 2 Runtime Environment is intended for software developers and vendors who wish to redistribute their applications.
</p>
-Des:
##----------------------------------------
=Pkg: jfsutils 1.1.12 1.18 x86_64
=Sum: IBM JFS Utility Programs
+Des:
<!-- DT:Rich -->
<p>This package contains utilities for managing IBM&#39;s Journaled File System (JFS) under Linux.  The
following utilities are available:
</p><p>
o fsck.jfs--initiate replay of the JFS transaction log and check and repair a JFS formatted device
o logdump--dump a JFS formatted device&#39;s journal log
o logredo--replay a JFS formatted device&#39;s journal log
o mkfs.jfs--create a JFS formatted partition
o xchkdmp--dump the contents of a JFS fsck log file created with xchklog
o xchklog--extract a log from the JFS fsck workspace into a file
o xpeek--shell-type JFS file system editor
</p>
-Des:
##----------------------------------------
=Pkg: json-glib-devel 0.6.2 3.1.55 x86_64
=Sum: Library for JavaScript Object Notation format
+Des:
<!-- DT:Rich -->
<p>JSON is a lightweight data-interchange format.It is easy for humans to
read and write. It is easy for machines to parse and generate.
</p><p>
JSON-GLib provides a parser and a generator GObject classes and various
wrappers for the complex data types employed by JSON, such as arrays
and objects.
</p><p>
JSON-GLib uses GLib native data types and the generic value container
GValue for ease of development. It also provides integration with the
GObject classes for direct serialization into, and deserialization from,
JSON data streams.
</p>
-Des:
##----------------------------------------
=Pkg: jtools 1.0 571.8 x86_64
=Sum: Ken Lunde's Japanese Code Manipulation Tools
+Des:
<!-- DT:Rich -->
<p>This is Ken Lunde&#39;s suite of Japanese and CJKV code manipulation
tools. It consists of:
<ul>
<li>CJKVConv.pl (a cross-locale CJKV code converter)
</li><li>jconv, a general-purpose Japanese code conversion tool
(JIS, Shift-JIS, EUC)
</li><li>jcode, a Japanese code inspection tool (JIS, Shift-JIS, EUC)
that reads the input file and creates an output file
containing all of the characters within the input file along with their
electronic codes in octal, decimal, or hexadecimal
notation (the default, if none specified, is hexadecimal)
</li><li>jchar, a generator for various Japanese character sets
(JIS, Shift-JIS, EUC)
</li><li>jgrep, a simplified GREP-like utility that recognizes
two-byte character sequences in Japanese Shift-JIS or EUC code
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: k3b-devel 1.0.5 48.32.32 x86_64
=Sum: A Universal CD and DVD Burning Application
+Des:
<!-- DT:Rich -->
<p>K3b is a CD burning application that supports Ogg Vorbis, MP3 audio files, DVD burning, CDDB, and much more.
</p>
-Des:
##----------------------------------------
=Pkg: kakasi 2.3.4 394.8 x86_64
=Sum: Filter to Convert Kanji Characters to Hiragana, Katakana, or Romaji
+Des:
<!-- DT:Rich -->
<p>KAKASI is the language processing filter to convert Kanji characters
to Hiragana, Katakana, or Romaji(1) and may be helpful for reading Japanese
documents. The word-splitting patch is merged from version 2.3.0.
</p><p>
</p><p>
The name &quot;KAKASI&quot; is the abbreviation of &quot;kanji kana simple
inverter&quot; and the inverse of SKK &quot;simple kana kanji converter&quot;
developed by Masahiko Sato at Tohoku University. Most entries
of the kakasi dictionary are derived from the SKK dictionaries. If
interested  in the naming of KAKASI, consult a Japanese-English
dictionary.
</p><p>
</p><p>
(1) &quot;Romaji&quot; is an alphabetical description of Japanese pronunciation.
</p>
-Des:
##----------------------------------------
=Pkg: kakasi-devel 2.3.4 394.8 x86_64
=Sum: header file and libraries of KAKASI
+Des:
<!-- DT:Rich -->
<p>header file and libraries of KAKASI
</p>
-Des:
##----------------------------------------
=Pkg: kakasi-dict 2.3.4 394.8 x86_64
=Sum: The base dictionary of KAKASI
+Des:
<!-- DT:Rich -->
<p>The base dictionary of KAKASI
</p>
-Des:
##----------------------------------------
=Pkg: kasumi 2.3 1.29 x86_64
=Sum: Dictionary Tool for Anthy
+Des:
<!-- DT:Rich -->
<p>A graphical tool to edit the personal dictionary for Anthy.
</p>
-Des:
##----------------------------------------
=Pkg: kate-devel 4.3.5 0.1.73 x86_64
=Sum: En-têtes pour éditeur de texte avancé
+Des:
<!-- DT:Rich -->
<p>Fichiers nécéssaires au développement d&#39;extensions pour Kate
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n-devel 4.3.5 0.1.73 x86_64
=Sum: Ce paquet contient le kit de développement de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet suggère les paquets qui sont construits depuis le module kdesdk.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3 3.5.10 20.31 x86_64
=Sum: Paquetage de base KDE (Base)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient kdebase, l&#39;un des paquets de base de
K Desktop Environment. On y trouve, entre autres, le gestionnaire de
fenêtres kwin, le programme de configuration KControl et le navigateur Konqueror
</p><p>
Ce paquet est indispensable pour utiliser le bureau KDE.
Il n&#39;est pas requis si vous utilisez juste des applications KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-32bit 3.5.10 20.31 x86_64
=Sum: Paquetage de base KDE (Base)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient kdebase, l&#39;un des paquets de base de
K Desktop Environment. On y trouve, entre autres, le gestionnaire de
fenêtres kwin, le programme de configuration KControl et le navigateur Konqueror
</p><p>
Ce paquet est indispensable pour utiliser le bureau KDE.
Il n&#39;est pas requis si vous utilisez juste des applications KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-devel 3.5.10 20.31 x86_64
=Sum: Paquetage KDE de base : Base, Environnement de construction
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient kdebase, l&#39;un des paquets de base de
K Desktop Environment. On y trouve, entre autres, le gestionnaire de
fenêtres KWIN, le programme de configuration KControl, le navigateur Konqueror
</p><p>
</p><p>
Ce paquet n&#39;est pas nécessaire si vous ne souhaitez pas compiler des applications KDE
</p>
-Des:
##----------------------------------------
=Pkg: kdebase3-runtime-32bit 3.5.10 20.31 x86_64
=Sum: Dépendances du moteur d'exécution des applications KDE3
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les dépendances du moteur d&#39;exécution des applications comme les esclaves KIO.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-workspace-devel 4.3.5 0.8.35 x86_64
=Sum: Composants de l'environnement de travail KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base pour un environnement de travail K Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: kdeedu4 4.3.5 0.2.44 x86_64
=Sum: Données pour les applications éducatives de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les données nécessaires à la bibliothèque &quot;éducative&quot; de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4 4.3.5 0.1.61 x86_64
=Sum: Données pour les jeux KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les données requises par les bibliothèques des jeux KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdegraphics4 4.3.5 0.1.74 x86_64
=Sum: Paquetage de base de kdegraphics
+Des:
<!-- DT:Rich -->
<p>Ce paquet suggère les paquets qui sont construits depuis le module kdegraphics
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-32bit 3.5.10 23.27.1 x86_64
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient kdelibs, l&#39;un des paquets de base de l&#39;environnement
K Desktop. Il inclut les bibliothèques de base du bureau KDE.
</p><p>
Ce paquet est absolument indispensable au fonctionnement du système KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-arts 3.5.10 23.27.1 x86_64
=Sum: Support aRts pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les liaisons et les éléments d&#39;interface pour utiliser le serveur audio aRts.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-arts-32bit 3.5.10 23.27.1 x86_64
=Sum: Support aRts pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les liaisons et les éléments d&#39;interface pour utiliser le serveur audio aRts.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-default-style-32bit 3.5.10 23.27.1 x86_64
=Sum: Style par défaut de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le style de widget &quot;Plastik&quot; et &quot;libkdefx&quot;. Il dépend seulement de Qt pas des bibliothèques KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-devel 3.5.10 23.27.1 x86_64
=Sum: Paquetage de base pour KDE : Environnement de construction
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3-doc 3.5.10 23.27.1 x86_64
=Sum: Documentation pour les bibliothèques de base de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le noyau de l&#39;environnement et les modèles pour le système d&#39;aide de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4-doc 4.3.5 0.2.46 x86_64
=Sum: Documentation pour les bibliothèques de base de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le noyau de l&#39;environnement et les modèles pour le système d&#39;aide de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3-arts 3.5.10 1.34 x86_64
=Sum: Support d'aRts KDEMM
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des greffons pour le support d&#39;aRts via le framework KDEMM
</p>
-Des:
##----------------------------------------
=Pkg: kdepim3 3.5.10 8.30 x86_64
=Sum: PIM - Gestionnaire de données personnelles pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquets contient Kontact et les applications autonomes pour gérer des données personnelles (PIM)
<ul>
<li>Kontact--PIM Gestionnaire de données personnelles
</li><li>KMail--Client de courriel
</li><li>KOrganizer--Agenda et planification
</li><li>KNode--Lecteur de nouvelles
</li><li>Kleopatra et KWatchGnuPG--Gestionnaire de certifications
</li><li>Divers assistants pour se connecter aux serveurs d&#39;applications de travail collaboratif
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdepim3-devel 3.5.10 8.30 x86_64
=Sum: PIM - Gestionnaire de données personnelles pour KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des outils pour gérer des adresses et des dates.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4-devel 4.3.5 0.1.67 x86_64
=Sum: Paquetage de base du gestionnaire de données personnelles de KDE : Environnement de construction
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les fichiers de développement du module kdepim.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4-runtime-devel 4.3.5 0.1.73 x86_64
=Sum: KDE Resources for PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE resources for Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3-translate 3.5.10 1.33 x86_64
=Sum: Outils pour gérer les traductions
+Des:
<!-- DT:Rich -->
<p>KBabel: gestion simple des fichiers PO. Les fichiers PO sont utilisés pour stocker les traductions des applications basées sur glibc.
</p><p>
poxml : traduire les fichiers DocBook en utilisant les fichiers PO.
</p>
-Des:
##----------------------------------------
=Pkg: kexec-tools 2.0.0 53.26.37 x86_64
=Sum: Tools for fast kernel loading
+Des:
<!-- DT:Rich -->
<p>Kexec is a user space utility for loading another kernel and asking the currently running kernel to do something with it.
A currently running kernel may be asked to start the loaded kernel on reboot, or to start the loaded kernel after it panics.
</p>
-Des:
##----------------------------------------
=Pkg: keyutils-devel 1.2 107.22 x86_64
=Sum: Development package for building linux key management utilities
+Des:
<!-- DT:Rich -->
<p>This package provides headers and libraries for building key utilities.
</p>
-Des:
##----------------------------------------
=Pkg: kinput2 v3.1 520.19 x86_64
=Sum: Kanji Input Server for the X Window System
+Des:
<!-- DT:Rich -->
<p>Kinput2 is an input server for X Window System applications
that require Japanese text input.
</p>
-Des:
##----------------------------------------
=Pkg: kiwi 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System
+Des:
<!-- DT:Rich -->
<p>The OpenSuSE KIWI Image System provides a complete operating system
image solution for Linux supported hardware platforms as well as
for virtualization systems like Xen.
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-isoboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System ISO boot
+Des:
<!-- DT:Rich -->
<p>kiwi boot (initrd) image for activating system images on ISO media
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-netboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System PXE network boot
+Des:
<!-- DT:Rich -->
<p>kiwi boot (initrd) image for activating system images via TFTP
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-oemboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI image descriptions
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenSuSE - KIWI image descriptions.
Each image description exists in a single directory and contains
an oemboot image description
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-usbboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System USB boot
+Des:
<!-- DT:Rich -->
<p>kiwi boot (initrd) image for activating system images on USB stick
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-vmxboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System Virtual Machine boot
+Des:
<!-- DT:Rich -->
<p>kiwi boot (initrd) image for activating system images on virtual disk
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-desc-xenboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System Xen Virtual Machine boot
+Des:
<!-- DT:Rich -->
<p>kiwi boot (initrd) image for activating a Xen image by xm
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-doc 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains the documentation and manual pages for the
KIWI Image System
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-instsource 3.74 5.57.3 x86_64
=Sum: KIWI - Installation Source creation
+Des:
<!-- DT:Rich -->
<p>This package contains modules used for installation source creation.
With those it is possible to create a valid installation repository
from blank RPM file trees. The created tree can be used directly for
the image creation process afterwards. This package allows using the
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-pxeboot 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI Image System PXE boot structure
+Des:
<!-- DT:Rich -->
<p>PXE basic directory structure and pre-build boot images
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-pxeboot-prebuild 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI TFTP prebuild boot images
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenSuSE - KIWI TFTP prebuild boot images
</p>
-Des:
##----------------------------------------
=Pkg: kiwi-tools 3.74 5.57.3 x86_64
=Sum: OpenSuSE - KIWI tools collection
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenSuSE - KIWI tools set usable in
and outside of operating system images
</p>
-Des:
##----------------------------------------
=Pkg: konkretcmpi 0.8.6 1.17 x86_64
=Sum: An open-source library/tool for rapidly developing CMPI providers in the C programming language
+Des:
<!-- DT:Rich -->
<p>An open-source tool for rapidly developing CMPI providers in the C programming language. KonkretCMPI makes CMPI provider development easier by generating type-safe concrete CIM interfaces from MOF definitions and by providing default implementations for many of the provider operations.
</p>
-Des:
##----------------------------------------
=Pkg: kopete-devel 4.3.5 0.1.74 x86_64
=Sum: Fichiers de développement pour messagerie instantanée
+Des:
<!-- DT:Rich -->
<p>Envoie des messages instantanés en utilisant divers protocoles
</p>
-Des:
##----------------------------------------
=Pkg: kpilot 4.3.5 0.1.67 x86_64
=Sum: Communication with the 3COM Palm Pilot
+Des:
<!-- DT:Rich -->
<p>Avec ce programme, votre machine Linux communique via &quot;Palm Cradle&quot;
avec votre Palm Pilot 3COM.
</p>
-Des:
##----------------------------------------
=Pkg: krb5-devel 1.6.3 133.27.1 x86_64
=Sum: MIT Kerberos5 - Include Files and Libraries
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network&#39;s security by eliminating the insecure
practice of cleartext passwords.
This package includes Libraries and Include Files for Development
</p>
-Des:
##----------------------------------------
=Pkg: krb5-devel-32bit 1.6.3 133.27.1 x86_64
=Sum: MIT Kerberos5 - Include Files and Libraries
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network&#39;s security by eliminating the insecure
practice of cleartext passwords.
This package includes Libraries and Include Files for Development
</p>
-Des:
##----------------------------------------
=Pkg: krb5-server 1.6.3 133.27.1 x86_64
=Sum: MIT Kerberos5 implementation - server
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network&#39;s security by eliminating the insecure
practice of cleartext passwords.
This package includes the kdc, kadmind and more.
</p>
-Des:
##----------------------------------------
=Pkg: kscpm 0.5.4 143.27 x86_64
=Sum: Support KDE pour SCPM
+Des:
<!-- DT:Rich -->
<p>This package adds KDE support for the profile manager SCPM. It contains a kicker applet for choosing a destination profile. By default, it uses SUMF to perform the profile switch, but it can be configured to execute an arbitrary command.
</p>
-Des:
##----------------------------------------
=Pkg: ksh-devel 93t 9.9.8 x86_64
=Sum: Korn Shell development environment
+Des:
<!-- DT:Rich -->
<p>The package includes C header files and the static libraries
together with the shared libraries for linking with other
projects.  Please be aware that the CPL licensed code can
not be used within GPL licensed project.
</p>
-Des:
##----------------------------------------
=Pkg: ktoblzcheck 1.19 1.15 x86_64
=Sum: Library to check account numbers and bank codes of German banks documents
+Des:
<!-- DT:Rich -->
<p>KtoBLZCheck is a library to check account numbers and bank codes of
German banks. Both a library for other programs as well as a short
command-line tool is available. It is possible to check pairs of
account numbers and bank codes (BLZ) of German banks, and to map bank
codes (BLZ) to the clear-text name and location of the bank.
</p>
-Des:
##----------------------------------------
=Pkg: ktoblzcheck-devel 1.19 1.15 x86_64
=Sum: Library to check account numbers and bank codes of German banks documents
+Des:
<!-- DT:Rich -->
<p>KtoBLZCheck is a library to check account numbers and bank codes of
German banks. Both a library for other programs as well as a short
command-line tool is available. It is possible to check pairs of
account numbers and bank codes (BLZ) of German banks, and to map bank
codes (BLZ) to the clear-text name and location of the bank.
</p>
-Des:
##----------------------------------------
=Pkg: ktorrent 3.1.5 2.32 x86_64
=Sum: Client BitTorrent de KDE
+Des:
<!-- DT:Rich -->
<p>Torrent est un programme BitTorrent pour KDE. Ses principales fonctionnalités sont :
Torrent est un programme BitTorrent pour KDE. Ses principales fonctionnalités sont :<ul>
<li>Télécharger les fichiers torrent
</li><li>Limiter et surveiller la vitesse d&#39;émission car la plupart des gens ne peuvent pas envoyer une quantité infinie de données
</li><li>Recherche internet utilisant le moteur de recherche dusite web de BitTorrent
</li><li>Trackers UDP
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ktorrent-devel 3.1.5 2.32 x86_64
=Sum: KDE BitTorrent Client Build Environment
+Des:
<!-- DT:Rich -->
<p>This packages include the necessary files to build KTorrent plugins.
</p>
-Des:
##----------------------------------------
=Pkg: ktorrent-lang 3.1.5 2.32 x86_64
=Sum: Client BitTorrent de KDE
+Des:
<!-- DT:Rich -->
<p>Torrent est un programme BitTorrent pour KDE. Ses principales fonctionnalités sont :
Torrent est un programme BitTorrent pour KDE. Ses principales fonctionnalités sont :<ul>
<li>Télécharger les fichiers torrent
</li><li>Limiter et surveiller la vitesse d&#39;émission car la plupart des gens ne peuvent pas envoyer une quantité infinie de données
</li><li>Recherche internet utilisant le moteur de recherche dusite web de BitTorrent
</li><li>Trackers UDP
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: lcrash 7.0.1_1434 1.22 x86_64
=Sum: Linux Kernel Crash Dump (LKCD) Utilities
+Des:
<!-- DT:Rich -->
<p>This software package contains system crash dump analysis tools.
It includes Linux Crash (lcrash) and all appropriate user level
scripts required for saving and configuring system crash dumps.
</p>
-Des:
##----------------------------------------
=Pkg: lcrash-devel 7.0.1_1434 1.22 x86_64
=Sum: Linux Kernel Crash Dump (LKCD) Utilities
+Des:
<!-- DT:Rich -->
<p>This software package contains system crash dump analysis tools.
It includes Linux Crash (lcrash) and all appropriate user level
scripts required for saving and configuring system crash dumps.
</p>
-Des:
##----------------------------------------
=Pkg: ldtp-python 1.3.0 4.27 x86_64
=Sum: Linux Desktop Testing Project (LDTP)
+Des:
<!-- DT:Rich -->
<p>GNU/Linux Desktop Testing Project (GNU/LDTP) is aimed at producing high quality test automation framework and cutting-edge tools that can be used to test GNU/Linux Desktop and improve it. It uses the Accessibility libraries to poke through the application&#39;s user interface. The framework has tools to generate Appmap by reading through the user interface components of an application. The framework also has tools to record test-cases based on user-selection on the application.
</p><p>
GNU/LDTP core framework uses Appmap and the recorded test-cases to test an application and gives the status of each test-case as output. As of now, GNU/LDTP can test any GNOME application which are accessibility enabled, Mozilla, Openoffice.org, any Java application (should have a UI based on swing) and KDE 4.0 applications based on QT 4.0 (based on the press releases by KDE).
</p><p>
We encourage you to join the project and help us to create robust, reliable and stable test tool/framework for Unix Desktops.
</p>
-Des:
##----------------------------------------
=Pkg: lib3ds-1-3 1.3.0 2.8 x86_64
=Sum: Import and Export of Autodesk 3DS Files
+Des:
<!-- DT:Rich -->
<p>Lib3ds is a free alternative to Autodesk&#39;s 3DS File Toolkit for handling
3DS files. Its main goal is to simplify the creation of 3DS import and
export filters.
</p>
-Des:
##----------------------------------------
=Pkg: lib3ds-devel 1.3.0 2.8 x86_64
=Sum: Import and Export of Autodesk 3DS Files
+Des:
<!-- DT:Rich -->
<p>Lib3ds is a free alternative to Autodesk&#39;s 3DS File Toolkit for handling
3DS files. Its main goal is to simplify the creation of 3DS import and
export filters.
</p>
-Des:
##----------------------------------------
=Pkg: libFLAC++6-32bit 1.2.1 68.15 x86_64
=Sum: Free Lossless Audio Codec Library
+Des:
<!-- DT:Rich -->
<p>This package contains the C++ library for FLAC (Free Lossless Audio Codec) developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: libGraphicsMagick2 1.2.5 4.31.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>GraphicsMagick(TM) provides a powerful image manipulation and
translation utility. It is capable of displaying still images and
animations using the X Window system, provides a simple interface for
interactively editing images, and is capable of importing selected
windows or the entire desktop. GraphicsMagick can read and write over
88 image formats, including JPEG, TIFF, WMF, SVG, PNG, PNM, GIF, and
Photo CD. It can resize, rotate, sharpen, color reduce, or add special
effects to the image and save the result to any supported format.
GraphicsMagick may be used to create animated or transparent .gifs,
create composite images, create thumbnail images, and much, much,
more.
</p><p>
GraphicsMagick is one of your choices if you need a program to manipulate
and display images. If you want to develop your own applications
which use GraphicsMagick code or APIs, you need to install
GraphicsMagick-devel as well.
</p><p>
This package is compiled with Q8, that means it provides better performance
on 8 and less bit images.
</p>
-Des:
##----------------------------------------
=Pkg: libHX-devel 1.23 3.14 x86_64
=Sum: General-purpose library
+Des:
<!-- DT:Rich -->
<p>A library for:
A library for:<ul>
<li>A+R/B trees to use for lists or maps (associative arrays)
</li><li>Deques (double-ended queues) (Stacks (LIFO) / Queues (FIFOs))
</li><li>platform independent opendir-style directory access
</li><li>platform independent dlopen-style shared library access
</li><li>auto-storage strings with direct access
</li><li>command line option (argv) parser
</li><li>shell-style config file parser
</li><li>platform independent random number generator with transparent
/dev/urandom support
</li><li>various string, memory and zvec ops
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libMagick++-devel 6.4.3.6 7.20.1 x86_64
=Sum: C++ Interface for ImageMagick - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>This is Magick++, the object-oriented C++ API for the ImageMagick
image-processing library.
</p><p>
Magick++ supports an object model inspired by PerlMagick. Magick++
should be faster than PerlMagick since it is written in a compiled
language which is not parsed at run-time. This makes it suitable for Web CGI
programs. Images support implicit reference counting so that copy
constructors and assignment incur almost no cost. The cost of actually
copying an image (if necessary) is done just before modification and this
copy is managed automatically by Magick++. De-referenced copies are
automatically deleted. The image objects support value (rather than
pointer) semantics so it is trivial to support multiple generations of an
image in memory at one time.
</p>
-Des:
##----------------------------------------
=Pkg: libMagick++1 6.4.3.6 7.20.1 x86_64
=Sum: C++ Interface for ImageMagick - runtime library
+Des:
<!-- DT:Rich -->
<p>This is Magick++, the object-oriented C++ API for the ImageMagick
image-processing library.
</p><p>
Magick++ supports an object model inspired by PerlMagick. Magick++
should be faster than PerlMagick since it is written in a compiled
language which is not parsed at run-time. This makes it suitable for Web CGI
programs. Images support implicit reference counting so that copy
constructors and assignment incur almost no cost. The cost of actually
copying an image (if necessary) is done just before modification and this
copy is managed automatically by Magick++. De-referenced copies are
automatically deleted. The image objects support value (rather than
pointer) semantics so it is trivial to support multiple generations of an
image in memory at one time.
</p>
-Des:
##----------------------------------------
=Pkg: libMagickWand1-32bit 6.4.3.6 7.20.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libMagickWand1 6.4.3.6 7.20.1 x86_64
=Sum: Viewer and Converter for Images - runtime library
+Des:
<!-- DT:Rich -->
<p>ImageMagick is a robust collection of tools and libraries to read, write,
and manipulate an image in many image formats, including popular formats
like TIFF, JPEG, PNG, PDF, PhotoCD, and GIF. With ImageMagick, you can
create images dynamically, making it suitable for Web applications.
You can also resize, rotate, sharpen, color-reduce, or add special effects
to an image and save your completed work in many different image formats.
Image processing operations are available from the command line as well
as through C, C++, and PERL-based programming interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libQtWebKit-devel 4.6.2 1.6.9 x86_64
=Sum: C++ Program Library, Core Components
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains base tools, like string, xml, and network handling.
</p>
-Des:
##----------------------------------------
=Pkg: libQtWebKit4-32bit 4.6.2 1.6.9 x86_64
=Sum: C++ Program Library, Core Components
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains base tools, like string, xml, and network handling.
</p>
-Des:
##----------------------------------------
=Pkg: libXalan-c-devel 1.10.0 8.15 x86_64
=Sum: An XSLT Transformation Engine in C++ - Development Files
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSL processor for transforming XML documents
into HTML, text, or other XML document types. Xalan-C++ represents an
almost complete and a robust C++ reference implementation of the W3C
Recommendations for XSL Transformations (XSLT) and the XML Path
Language (XPath).
</p><p>
This package contains files needed for development with Xalanc
</p>
-Des:
##----------------------------------------
=Pkg: libXalan-c110 1.10.0 8.15 x86_64
=Sum: An XSLT Transformation Engine in C++
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSL processor for transforming XML documents
into HTML, text, or other XML document types. Xalan-C++ represents an
almost complete and robust C++ reference implementation of the W3C
Recommendations for XSL Transformations (XSLT) and the XML Path
Language (XPath).
</p>
-Des:
##----------------------------------------
=Pkg: libXerces-c-devel 2.8.0 29.17.1 x86_64
=Sum: A validating XML parser - Development Files
+Des:
<!-- DT:Rich -->
<p>Xerces-C is a validating XML parser written in a portable subset of
C++. Xerces-C makes it easy to give your application the ability to
read and write XML data. A shared library is provided for parsing,
generating, manipulating, and validating XML documents.
</p><p>
This package includes files needed for development with Xerces-c
</p>
-Des:
##----------------------------------------
=Pkg: libXerces-c28 2.8.0 29.17.1 x86_64
=Sum: Shared libraries for Xerces-c - a validating XML parser
+Des:
<!-- DT:Rich -->
<p>Xerces-C is a validating XML parser written in a portable subset of C++. Xerces-C makes it easy to give your application the ability to read and write XML data. A shared library is provided for parsing, generating, manipulating, and validating XML documents. Xerces-C is faithful to the XML 1.0 recommendation and associated standards ( DOM 1.0, DOM 2.0. SAX 1.0, SAX 2.0, Namespaces).
</p><p>
This package contains just the shared libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libXiterm 0.5.20040304 259.27 x86_64
=Sum: Terminal emulator Xaw widget library based on libiterm
+Des:
<!-- DT:Rich -->
<p>Terminal emulator Xaw widget library based on libiterm
</p>
-Des:
##----------------------------------------
=Pkg: libXiterm-devel 0.5.20040304 259.27 x86_64
=Sum: Header files and development libraries for libXiterm
+Des:
<!-- DT:Rich -->
<p>Header files and development libraries for libXiterm
</p>
-Des:
##----------------------------------------
=Pkg: libacl-devel 2.2.47 30.34.29 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libada43 4.3.4_20091019 0.7.35 x86_64
=Sum: GNU Ada Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries required to run programs
compiled with the GNU Ada compiler (GNAT) if they are compiled to use
shared libraries. It also contains the shared libraries for the
Implementation of the Ada Semantic Interface Specification (ASIS), the
implementation of Distributed Systems Programming (GLADE) and the Posix
1003.5 Binding (Florist).
</p>
-Des:
##----------------------------------------
=Pkg: libadns-devel 1.4 73.21 x86_64
=Sum: Libraries and header files to develop programs with libadns support
+Des:
<!-- DT:Rich -->
<p>Libadns-devel includes the header file and static library to develop programs with libads support.
</p>
-Des:
##----------------------------------------
=Pkg: libaio-32bit 0.3.109 0.1.46 x86_64
=Sum: Linux-Native Asynchronous I/O Access Library
+Des:
<!-- DT:Rich -->
<p>The Linux-native asynchronous I/O facility (&quot;async I/O&quot;, or &quot;aio&quot;) has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
</p>
-Des:
##----------------------------------------
=Pkg: libaio-devel 0.3.109 0.1.46 x86_64
=Sum: Development Files for Linux-native Asynchronous I/O Access
+Des:
<!-- DT:Rich -->
<p>This package provides header files to include, and libraries to link with,
for the Linux-native asynchronous I/O facility (&quot;async I/O&quot;, or &quot;aio&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: libaio-devel-32bit 0.3.109 0.1.46 x86_64
=Sum: Development Files for Linux-native Asynchronous I/O Access
+Des:
<!-- DT:Rich -->
<p>This package provides header files to include, and libraries to link with,
for the Linux-native asynchronous I/O facility (&quot;async I/O&quot;, or &quot;aio&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: libakode 2.0.2 115.32 x86_64
=Sum: A Simple Audio Back-End
+Des:
<!-- DT:Rich -->
<p>aKode is a simple audio back-end suitable for simple actions.
</p>
-Des:
##----------------------------------------
=Pkg: libakode-devel 2.0.2 115.32 x86_64
=Sum: a simple audio backend
+Des:
<!-- DT:Rich -->
<p>aKode is a simple audio backend suitable for simple actions.
</p>
-Des:
##----------------------------------------
=Pkg: libakonadiprotocolinternals-devel 1.2.1 1.1.87 x86_64
=Sum: PIM Storage Service: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains development files of Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: libamso-rdmav2 1.0 3.15 x86_64
=Sum: AMSO1100 Userspace Library
+Des:
<!-- DT:Rich -->
<p>libamso provides a device-specific userspace driver for Chelsio RNICsto use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libamso-rdmav2-32bit 1.0 3.15 x86_64
=Sum: AMSO1100 Userspace Library
+Des:
<!-- DT:Rich -->
<p>libamso provides a device-specific userspace driver for Chelsio RNICsto use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libamso-rdmav2-devel 1.0 3.15 x86_64
=Sum: AMSO1100 Userspace Library
+Des:
<!-- DT:Rich -->
<p>libamso provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libamso-rdmav2-devel-32bit 1.0 3.15 x86_64
=Sum: AMSO1100 Userspace Library
+Des:
<!-- DT:Rich -->
<p>libamso provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libao-devel 0.8.8 81.27 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libapparmor-devel 2.3 51.14 x86_64
=Sum: Development headers and libraries for libapparmor.
+Des:
<!-- DT:Rich -->
<p>Development headers and libraries for libapparmor.
</p>
-Des:
##----------------------------------------
=Pkg: libapr-util1 1.3.4 12.20.2 x86_64
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>A companion library to APR, the Apache Portable Runtime.
</p>
-Des:
##----------------------------------------
=Pkg: libapr-util1-devel 1.3.4 12.20.2 x86_64
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>A companion library to APR, the Apache Portable Runtime.
</p>
-Des:
##----------------------------------------
=Pkg: libapr1 1.3.3 11.16.1 x86_64
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>The mission of the Apache Portable Runtime (APR) project is to create and maintain software libraries that provide a predictable and consistent interface to underlying platform-specific implementations. The primary goal is to provide an API to which software developers may code and be assured of predictable if not identical behaviour regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-specific deficiencies or features.
</p><p>
The APR is used by both Open Source and Commercial projects, prominent examples being the Apache HTTP server.
</p>
-Des:
##----------------------------------------
=Pkg: libapr1-devel 1.3.3 11.16.1 x86_64
=Sum: Apache Portable Runtime (APR) Library
+Des:
<!-- DT:Rich -->
<p>The mission of the Apache Portable Runtime (APR) project is to create and maintain software libraries that provide a predictable and consistent interface to underlying platform-specific implementations. The primary goal is to provide an API to which software developers may code and be assured of predictable if not identical behaviour regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take advantage of platform-specific deficiencies or features.
</p><p>
The APR is used by both Open Source and Commercial projects, prominent examples being the Apache HTTP server.
</p>
-Des:
##----------------------------------------
=Pkg: libapt-pkg-libc6_9-6-2 0.5.15lorg3.2 123.31 x86_64
=Sum: Libraries for APT for RPM
+Des:
<!-- DT:Rich -->
<p>This package contains libraries needed by apt and some other packages.
</p>
-Des:
##----------------------------------------
=Pkg: libarchive-devel 2.5.5 5.19 x86_64
=Sum: Development files for libarchive
+Des:
<!-- DT:Rich -->
<p>Libarchive is a programming library that can create and read several different
streaming archive formats, including most popular tar variants and several cpio
formats. It can also write shar archives and read ISO9660 CDROM images. The
bsdtar program is an implementation of tar(1) that is built on top of
libarchive. It started as a test harness, but has grown and is now the standard
system tar for FreeBSD 5 and 6.
</p><p>
This package contains the development files.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl-devel 2.3.20 46.16.43 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libasm-devel 0.137 8.22.58 x86_64
=Sum: A collection of utilities and DSOs to handle compiled objects
+Des:
<!-- DT:Rich -->
<p>Elfutils is a collection of utilities, including ld (a linker), nm (for listing symbols from object files), size (for listing the section sizes of an object or archive file), strip (for discarding symbols), readline (the see the raw ELF file structures), and elflint (to check for well-formed ELF files).  Also included are numerous helper libraries which implement DWARF, ELF, and machine-specific ELF
handling.
</p>
-Des:
##----------------------------------------
=Pkg: libassuan-devel 1.0.5 1.14 x86_64
=Sum: Libassuan is the IPC library used by GnuPG version 2
+Des:
<!-- DT:Rich -->
<p>Libassuan is the IPC library used by <a href="pkg://gpg2"> GnuPG version 2</a>
</p><p>
<a href="pkg://gpgme">gpgme</a> also uses libassuan to communicate with a libassuan-enabled
GnuPG v2 server, but it uses it&#39;s own copy of libassuan.
</p>
-Des:
##----------------------------------------
=Pkg: libatomic-ops-devel 1.2 14.8 x86_64
=Sum: A portable library for atomic memory operations
+Des:
<!-- DT:Rich -->
<p>This package provides semi-portable access to hardware provided
atomic memory operations.
</p>
-Des:
##----------------------------------------
=Pkg: libattr-devel 2.4.43 1.18 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries and header files needed to
develop programs which make use of extended attributes.
For Linux programs, the documented system call API is the
recommended interface, but an SGI IRIX compatibility interface
is also provided.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-devel 0.6.23 11.19.22 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-glib-devel 0.6.23 13.19.26 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>GLib support for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-gobject-devel 0.6.23 13.19.26 x86_64
=Sum: Service D-BUS pour Zeroconf et Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-gobject0 0.6.23 13.19.26 x86_64
=Sum: Service D-BUS pour Zeroconf et Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavahi-ui0 0.6.23 13.19.26 x86_64
=Sum: Service D-BUS pour Zeroconf et Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-0 0.5.3 131.15 x86_64
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control.  Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and device functions that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide a high level interface
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-0-32bit 0.5.3 131.15 x86_64
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control.  Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and device functions that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide a high level interface
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-devel 0.5.3 131.15 x86_64
=Sum: libavc1394 is a programming interface to the AV/C specification
+Des:
<!-- DT:Rich -->
<p>libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control.  Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and functions of devices that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide high level interfaces
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394-devel-32bit 0.5.3 131.15 x86_64
=Sum: libavc1394 is a programming interface to the AV/C specification
+Des:
<!-- DT:Rich -->
<p>libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control.  Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and functions of devices that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide high level interfaces
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libbabl-0_0-0 0.0.22 4.22 x86_64
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle-devel 0.3.5.1 7.27 x86_64
=Sum: Beagle C interface development files
+Des:
<!-- DT:Rich -->
<p>This package contains files needed to develop applications using the beagle Library.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle-python 0.3.5.1 7.27 x86_64
=Sum: Beagle Python Interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in python.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle1-32bit 0.3.5.1 7.27 x86_64
=Sum: Beagle C Interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libbitmask-devel 2.0 4.22 x86_64
=Sum: Multi-word bitmask abstract data type (used by cpusets)
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that The
libbitmask package provides an abstract data type for arbitrary length
bit masks, with a variety of operators.  The cpuset package depends
on libbitmask.
</p>
-Des:
##----------------------------------------
=Pkg: libbitmask1 2.0 4.22 x86_64
=Sum: Multi-word bitmask abstract data type (used by cpusets)
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that The
libbitmask package provides an abstract data type for arbitrary length
bit masks, with a variety of operators.  The cpuset package depends
on libbitmask.
</p>
-Des:
##----------------------------------------
=Pkg: libblas3 3.1.1 64.21 x86_64
=Sum: BLAS Shared Library
+Des:
<!-- DT:Rich -->
<p>BLAS (Basic Linear Algebra Subprograms) is a standard library for
numerical algebra.  BLAS provides a number of basic algorithms for
linear algebra.
</p>
-Des:
##----------------------------------------
=Pkg: libblkid-devel 2.16 6.8.2 x86_64
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libblkid-devel-32bit 2.16 6.8.2 x86_64
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libblkid1-32bit 2.16 6.8.2 x86_64
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libblocxx-devel 2.1.0.342 122.6 x86_64
=Sum: BlocXX--C++ : Cadre de développement d'applications
+Des:
<!-- DT:Rich -->
<p>BloCXX est un cadre général de développement d&#39;applications C++. Ce paquet contient la bibliothèque  BloCXX.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-devel 2.24.2 2.1.63 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo-doc 2.24.2 2.1.63 x86_64
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>Bonobo is a component system for the GNOME platform. Libbonobo is the new version for the GNOME 2.x platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-devel 2.24.2 1.1.201 x86_64
=Sum: Include files and libraries mandatory for development with libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications that use libbonoboui.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui-doc 2.24.2 1.1.201 x86_64
=Sum: Documentation for libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for libbonoboui.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_date_time1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Date.Time Runtime libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost Date.Time runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_filesystem1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Filesystem Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Filesystem libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_graph1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Graph Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Graph Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_iostreams1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::IOStreams Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::IOStreams Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_math1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Math Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Math Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_mpi1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::MPI Runtime libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::MPI Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_program_options1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::ProgramOptions Runtime libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::ProgramOptions Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_python1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Python Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Python Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_regex1_36_0 1.36.0 11.17 x86_64
=Sum: The Boost::Regex runtime library
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Regex runtime library.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_serialization1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Serialization Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Serialization Runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_system1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::System Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::System runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_test1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Test Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Test runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_thread1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Thread Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Thread runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libboost_wave1_36_0 1.36.0 11.17 x86_64
=Sum: Boost::Wave Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the Boost::Wave runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libbotan-1_6_4 1.6.4 2.22 x86_64
=Sum: A C++ Crypto Library
+Des:
<!-- DT:Rich -->
<p>Botan is a C++ library that provides support for many common cryptographic
operations, including encryption, authentication, and X.509v3 certificates and
CRLs. A wide variety of algorithms is supported, including RSA, DSA, DES, AES,
MD5, and SHA-1.
</p>
-Des:
##----------------------------------------
=Pkg: libbotan-devel 1.6.4 2.22 x86_64
=Sum: Development files for Botan
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries needed to develop programs
that use the Botan library.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl-devel 0.10.0 60.27 x86_64
=Sum: Development Package for GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This package contains all header files to develop with the GObject Bluetooth Controller Library.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl-lang 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbtctl4 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libbz2-devel 1.0.5 34.246 x86_64
=Sum: The bzip2 runtime library development files
+Des:
<!-- DT:Rich -->
<p>The bzip2 runtime library development files.
</p>
-Des:
##----------------------------------------
=Pkg: libcaca-devel 0.99.beta13b 47.30 x86_64
=Sum: Library for Colour ASCII Art, text mode graphics
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries needed to
compile applications or shared objects that use libcaca.
</p>
-Des:
##----------------------------------------
=Pkg: libcanberra-devel 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcanberra-gtk-32bit 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcanberra-gtk0-32bit 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcanberra0-32bit 0.18 2.1.225 x86_64
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcap-devel 2.11 2.15 x86_64
=Sum: Development files for libcap
+Des:
<!-- DT:Rich -->
<p>Development files (Headers, libraries for static linking, etc) for libcap.
</p><p>
libcap is a library for getting and setting POSIX.1e (formerly POSIX 6)
draft 15 capabilities.
</p><p>
Install libcap-devel if you want to develop or compile applications using
libcap.
</p>
-Des:
##----------------------------------------
=Pkg: libcap-progs 2.11 2.15 x86_64
=Sum: Libcap utility programs
+Des:
<!-- DT:Rich -->
<p>This package contains utility programs handling capabilities via libcap.
</p>
-Des:
##----------------------------------------
=Pkg: libcap1 1.10 6.10 x86_64
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>This package provides a compatible library for the old libcap-1.
</p>
-Des:
##----------------------------------------
=Pkg: libcap1-32bit 1.10 6.10 x86_64
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>This package provides a compatible library for the old libcap-1.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb-devel 1.3.0 67.15 x86_64
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb2 1.3.0 67.15 x86_64
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb2-32bit 1.3.0 67.15 x86_64
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio++0 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio-devel 0.80 6.11 x86_64
=Sum: CD-ROM access library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libcgroup-devel 0.34 2.3.34 x86_64
=Sum: Control groups management tools devel package
+Des:
<!-- DT:Rich -->
<p>Control groups, a new kernel feature in Linux 2.6.24 provides a file system interface to manipulate and control the details on task grouping including creation of new task groups (control groups), permission handling and task assignment.
</p>
-Des:
##----------------------------------------
=Pkg: libcgroup1 0.34 2.3.34 x86_64
=Sum: Control groups management tools
+Des:
<!-- DT:Rich -->
<p>Control groups, a new kernel feature in Linux 2.6.24 provides a file system interface to manipulate and control the details on task grouping including creation of new task groups (control groups), permission handling and task assignment.
</p>
-Des:
##----------------------------------------
=Pkg: libchamplain-devel 0.4.0 1.2.84 x86_64
=Sum: Library to display maps - Development Files
+Des:
<!-- DT:Rich -->
<p>Libchamplain is a C library providing a ClutterActor to display maps. It
also provides a Gtk+ widget to display maps in Gtk+ applications.
</p><p>
It supports numerous free map sources such as OpenStreetMap,
OpenAerialMap and Maps for free.
</p>
-Des:
##----------------------------------------
=Pkg: libchamplain0 0.4.0 1.2.84 x86_64
=Sum: Library to display maps
+Des:
<!-- DT:Rich -->
<p>Libchamplain is a C library providing a ClutterActor to display maps. It
also provides a Gtk+ widget to display maps in Gtk+ applications.
</p><p>
It supports numerous free map sources such as OpenStreetMap,
OpenAerialMap and Maps for free.
</p>
-Des:
##----------------------------------------
=Pkg: libchewing-devel 0.3.0 82.15 x86_64
=Sum: Intelligent phonetic input method library for traditional Chinese
+Des:
<!-- DT:Rich -->
<p>Intelligent phonetic input method library for traditional Chinese
</p>
-Des:
##----------------------------------------
=Pkg: libchipcard3 3.0.4 72.32 x86_64
=Sum: A Library That Allows Easy Access to Smart Cards (Chipcards)
+Des:
<!-- DT:Rich -->
<p>Libchipcard allows easy access to smart cards. It provides basic access
to memory and processor cards and has special support for German medical
cards, German &quot;Geldkarten,&quot; and HBCI (home banking) cards (both type 0 and
type 1).
It accesses the readers via CTAPI or PC/SC interfaces and has successfully
been tested with Towitoko, Kobil, and Reiner-SCT readers.
</p>
-Des:
##----------------------------------------
=Pkg: libchipcard3-devel 3.0.4 72.32 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libcloog0 0.15.8+ppl 0.2.22 x86_64
=Sum: The CLOOG shared library
+Des:
<!-- DT:Rich -->
<p>The shared library for the Chunky Loop Generator.
</p>
-Des:
##----------------------------------------
=Pkg: libclutter-glx-1_0-0 1.0.6 1.1.66 x86_64
=Sum: The clutter library
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libclutter-gtk-0_10-0 0.10.2 2.1.88 x86_64
=Sum: The Clutter library for Gtk
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
Gtk+ support.
</p>
-Des:
##----------------------------------------
=Pkg: libcmpiutil 0.5 15.17.3 x86_64
=Sum: Library of utility functions for CMPI providers
+Des:
<!-- DT:Rich -->
<p>Libcmpiutil is a library of utility functions for CMPI providers.  The goal is to reduce the amount of repetitive work done in most CMPI providers by encapsulating common procedures with more &quot;normal&quot; APIs.  This extends from operations like getting typed instance properties to standardizing method dispatch and argument checking.
</p>
-Des:
##----------------------------------------
=Pkg: libcmpiutil-devel 0.5 15.17.3 x86_64
=Sum: Library of utility functions for CMPI providers
+Des:
<!-- DT:Rich -->
<p>Libcmpiutil is a library of utility functions for CMPI providers.  The goal is to reduce the amount of repetitive work done in most CMPI providers by encapsulating common procedures with more &quot;normal&quot; APIs.  This extends from operations like getting typed instance properties to standardizing method dispatch and argument checking.
</p>
-Des:
##----------------------------------------
=Pkg: libcom_err-devel 1.41.9 2.1.51 x86_64
=Sum: Development files for libcom_err
+Des:
<!-- DT:Rich -->
<p>Development files for the com_err error message display library.
</p>
-Des:
##----------------------------------------
=Pkg: libcom_err-devel-32bit 1.41.9 2.1.51 x86_64
=Sum: Development files for libcom_err
+Des:
<!-- DT:Rich -->
<p>Development files for the com_err error message display library.
</p>
-Des:
##----------------------------------------
=Pkg: libcompizconfig 0.7.8 4.8 x86_64
=Sum: CompizConfig plugin(ccp) required for compizconfig-settings-manager(ccsm)
+Des:
<!-- DT:Rich -->
<p>CompizConfig plugin(ccp) required for compizconfig-settings-manager(ccsm).
</p>
-Des:
##----------------------------------------
=Pkg: libcompizconfig-devel 0.7.8 4.8 x86_64
=Sum: Development files for libcompizconfig
+Des:
<!-- DT:Rich -->
<p>CompizConfig plugin(ccp) required for compizconfig-settings-manager(ccsm)
</p><p>
</p><p>
This package contains development files.
</p>
-Des:
##----------------------------------------
=Pkg: libconfuse-devel 2.5 67.1.46 x86_64
=Sum: The development files for libconfuse
+Des:
<!-- DT:Rich -->
<p>libConfuse is a configuration file parser library, licensed under the terms of
the LGPL, and written in C. It supports sections and (lists of) values
(strings, integers, floats, booleans or other sections), as well as some other
features (such as single/double-quoted strings, environment variable expansion,
functions and nested include statements). It makes it very easy to add
configuration file capability to a program using a simple API.
</p><p>
The goal of libConfuse is not to be the configuration file parser library with
a gazillion of features. Instead, it aims to be easy to use and quick to
integrate with your code. libConfuse was called libcfg before, but was changed
to not confuse with other similar libraries.
</p><p>
</p><p>
This package holds the development files for libconfuse.
</p>
-Des:
##----------------------------------------
=Pkg: libconfuse0 2.5 67.1.46 x86_64
=Sum: A configuration file parser library
+Des:
<!-- DT:Rich -->
<p>libConfuse is a configuration file parser library, licensed under the terms of the LGPL, and written in C. It supports sections and (lists of) values
(strings, integers, floats, booleans or other sections), as well as some other features (such as single/double-quoted strings, environment variable expansion, functions and nested include statements). It makes it very easy to add configuration file capability to a program using a simple API.
</p><p>
The goal of libConfuse is not to be the configuration file parser library with a gazillion of features. Instead, it aims to be easy to use and quick to
integrate with your code. libConfuse was called libcfg before, but was changed to not confuse with other similar libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libcppunit-1_12-0 1.12.0 3.7 x86_64
=Sum: C++ Port of the JUnit Testing Framework
+Des:
<!-- DT:Rich -->
<p>CppUnit is the C++ port of the famous JUnit framework for unit testing.
Test output is in XML for automatic testing and GUI based for supervised tests.
</p>
-Des:
##----------------------------------------
=Pkg: libcppunit-devel 1.12.0 3.7 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libcpuset-devel 1.0 8.1.49 x86_64
=Sum: cpuset processor and memory placement library
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that enables a
system administrator to confine tasks to running certain CPUs, and to
allocating memory on certain Memory Nodes.  The libcpuset library provides a
convenient &#39;C&#39; API to cpusets.
</p>
-Des:
##----------------------------------------
=Pkg: libcpuset1 1.0 8.1.49 x86_64
=Sum: cpuset processor and memory placement library
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that enables a
system administrator to confine tasks to running certain CPUs, and to
allocating memory on certain Memory Nodes.  The libcpuset library provides a
convenient &#39;C&#39; API to cpusets.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco 0.6.1 120.16 x86_64
=Sum: CSS2 Parser Library
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model-like API.
</p>
-Des:
##----------------------------------------
=Pkg: libcroco-devel 0.6.1 120.16 x86_64
=Sum: CSS2 Parser Library Development Files
+Des:
<!-- DT:Rich -->
<p>Libcroco is a stand-alone CSS2 parsing library. It provides a low-level event-driven SAC-like API and a CSS object model like API.
</p>
-Des:
##----------------------------------------
=Pkg: libcryptsetup-devel 1.0.5_SVNr46 58.30.38 x86_64
=Sum: Set Up dm-crypt Based Encrypted Block Devices
+Des:
<!-- DT:Rich -->
<p>cryptsetup is used to conveniently set up dm-crypt based device-mapper targets. It allows to set up targets to read cryptoloop compatible volumes as well as LUKS formatted ones. The package additionally includes support for automatically setting up encrypted volumes at boot time via the config file /etc/crypttab.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync-devel 0.41.98 1.21 x86_64
=Sum: Development files for csync
+Des:
<!-- DT:Rich -->
<p>The libcsync-devel package contains the static libraries and header files needed for development with csync.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync-devel-doc 0.41.98 1.21 x86_64
=Sum: Developer documentation for csync
+Des:
<!-- DT:Rich -->
<p>The libcsync-devel-doc package provides documentation for csync development.
</p>
-Des:
##----------------------------------------
=Pkg: libcsync0-32bit 0.41.98 1.21 x86_64
=Sum: A user level bidirectional client only file synchronizer
+Des:
<!-- DT:Rich -->
<p>csync is an implementation of a file synchronizer which provides the feature of roaming home directories for Linux clients. csync makes use of libsmbclient in Samba/Windows environments.
</p>
-Des:
##----------------------------------------
=Pkg: libcurl-devel 7.19.0 11.24.25 x86_64
=Sum: A Tool for Transferring Data from URLs
+Des:
<!-- DT:Rich -->
<p>Curl is a client to get documents and files from or send documents
to a server using any of the supported protocols
(HTTP, HTTPS, FTP, GOPHER, DICT, TELNET, LDAP, or FILE).
The command is designed to work without user interaction
or any kind of interactivity.
</p>
-Des:
##----------------------------------------
=Pkg: libcxgb3-rdmav2 1.2.2 5.15 x86_64
=Sum: Chelsio T3 RNIC OpenIB Userspace Library
+Des:
<!-- DT:Rich -->
<p>libcxgb3 provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libcxgb3-rdmav2-32bit 1.2.2 5.15 x86_64
=Sum: Chelsio T3 RNIC OpenIB Userspace Library
+Des:
<!-- DT:Rich -->
<p>libcxgb3 provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libcxgb3-rdmav2-devel 1.2.2 5.15 x86_64
=Sum: Chelsio T3 RNIC OpenIB Userspace Library
+Des:
<!-- DT:Rich -->
<p>libcxgb3 provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libcxgb3-rdmav2-devel-32bit 1.2.2 5.15 x86_64
=Sum: Chelsio T3 RNIC OpenIB Userspace Library
+Des:
<!-- DT:Rich -->
<p>libcxgb3 provides a device-specific userspace driver for Chelsio RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libdaemon-devel 0.12 31.6 x86_64
=Sum: libdaemon is a lightweight C library that eases the writing of UNIX daemons.
+Des:
<!-- DT:Rich -->
<p>libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts:
<ul>
<li>A wrapper around fork() which does the correct daemonization procedure of a process
</li><li>A wrapper around syslog() for simpler and compatible log output to Syslog or STDERR
</li><li>An API for writing PID files
</li><li>An API for serializing UNIX signals into a pipe for usage with select() or poll()
</li><li>An API for running subprocesses with STDOUT and STDERR redirected to syslog.
</li></ul>
APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal.
</p>
-Des:
##----------------------------------------
=Pkg: libdatrie-devel 0.1.3 1.15 x86_64
=Sum: Double-Array Trie Library (development)
+Des:
<!-- DT:Rich -->
<p>libdatrie header files, tools, and static libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libdatrie0 0.1.3 1.15 x86_64
=Sum: Double-Array Trie Library
+Des:
<!-- DT:Rich -->
<p>This is an implementation of double-array structure for representing trie,
as proposed by Junichi Aoe.
</p>
-Des:
##----------------------------------------
=Pkg: libdb-4_5-devel 4.5.20 95.39 x86_64
=Sum: Development Files and Libraries for the old Berkeley DB library Version 4.5
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the header files and libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libdb_java-4_5 4.5.20 95.20 x86_64
=Sum: Java Bindings for the Berkeley DB
+Des:
<!-- DT:Rich -->
<p>These are the Java bindings for the Berkeley DB. They are needed for the Java support of db and dbxml.
</p>
-Des:
##----------------------------------------
=Pkg: libdbus-1-qt3-0-devel 0.8.1 17.25 x86_64
=Sum: Development files for libdbus-1-qt3
+Des:
<!-- DT:Rich -->
<p>This library provides Qt3-classes for accessing the DBus.
</p><p>
This package holds the development files for libdbus-1-qt3.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394-22 2.0.2 10.15 x86_64
=Sum: 1394-Based Digital Camera Control Library
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf).  It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394-devel 2.0.2 10.15 x86_64
=Sum: Development libraries and header files for dc1394
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries for building
programs using the dc1394 library.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394_control12 1.2.2 10.15 x86_64
=Sum: 1394-Based Digital Camera Control Library
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf).  It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394_control12-devel 1.2.2 10.15 x86_64
=Sum: 1394-Based Digital Camera Control Library
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the
1394-Based Digital Camera Specification (which can be found at
http://www.1394ta.org/Download/Technology/Specifications/Camera120.pdf).  It
utilizes the low-level functionality provided by libraw1394 to communicate with
the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdhcp6client-1_0-2 1.0.22 3.19.16 x86_64
=Sum: DHCP Client library for IPv6
+Des:
<!-- DT:Rich -->
<p>A library which allows to include DHCPv6 client support into network control applications.
</p>
-Des:
##----------------------------------------
=Pkg: libdhcp6client-devel 1.0.22 3.19.16 x86_64
=Sum: Development files for libdhcp6client
+Des:
<!-- DT:Rich -->
<p>This are the header files and the static library for libdhcp6client.
The libdhcp6client library allows to include DHCPv6 client support into network control applications.
</p>
-Des:
##----------------------------------------
=Pkg: libdigikam-devel 0.9.4 51.33 x86_64
=Sum: Un gestionnaire de photo KDE
+Des:
<!-- DT:Rich -->
<p>digiKam is a simple digital photo management application for KDE, which makes importing and organizing digital photos easy. The photos can be organized in albums, which can be sorted chronologically, by directory layout, or by custom collections. An easy-to-use interface is provided that enables you to connect to your camera and preview, download, and delete your images.
</p>
-Des:
##----------------------------------------
=Pkg: libdiscid-devel 0.2.1 1.22 x86_64
=Sum: Library for creating MusicBrainz DiscIDs from audio CDs
+Des:
<!-- DT:Rich -->
<p>libdiscid is a C library for creating MusicBrainz DiscIDs from audio CDs. It reads a CD&#39;s table of contents (TOC) and generates an identifier which can be used to lookup the CD at MusicBrainz. Additionally, it provides a submission URL for adding the DiscID to the database.
</p><p>
The interface of this library is new, but the DiscID algorithm and the operating system dependent CD-ROM/DVD-ROM access code have been ported from libmusicbrainz version 2. For more info about the interface read the [WWW] API documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libdiscid1 0.2.1 1.22 x86_64
=Sum: Library for creating MusicBrainz DiscIDs from audio CDs
+Des:
<!-- DT:Rich -->
<p>libdiscid is a C library for creating MusicBrainz DiscIDs from audio CDs. It reads a CD&#39;s table of contents (TOC) and generates an identifier which can be used to lookup the CD at MusicBrainz. Additionally, it provides a submission URL for adding the DiscID to the database.
</p><p>
The interface of this library is new, but the DiscID algorithm and the operating system dependent CD-ROM/DVD-ROM access code have been ported from libmusicbrainz version 2. For more info about the interface read the [WWW] API documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libdjvulibre-devel 3.5.21 1.24 x86_64
=Sum: Libraries of Open Source Implementation of DjVu - djvulibre
+Des:
<!-- DT:Rich -->
<p>Libraries of Open Source Implementation of DjVu - djvulibre.
</p>
-Des:
##----------------------------------------
=Pkg: libdmxview-devel 0.1.0 4.17 x86_64
=Sum: DMX viewing library
+Des:
<!-- DT:Rich -->
<p>Library for efficiently viewing and controlling remote desktop sessions.
</p>
-Des:
##----------------------------------------
=Pkg: libdmxview0 0.1.0 4.17 x86_64
=Sum: DMX viewing library
+Des:
<!-- DT:Rich -->
<p>Library for efficiently viewing and controlling remote desktop sessions.
</p>
-Des:
##----------------------------------------
=Pkg: libdnet-devel 1.11 87.17 x86_64
=Sum: Devel files for libdnet
+Des:
<!-- DT:Rich -->
<p>libdnet provides a simplified, portable interface to several low-level networking routines, including:
<ul>
<li>network address manipulation
</li><li>kernel arp(4) cache and route(4) table lookup and manipulation
</li><li>network firewalling (IP filter, ipfw, ipchains, pf, PktFilter, ...)
</li><li>network interface lookup and manipulation
</li><li>IP tunnelling (BSD/Linux tun, Universal TUN/TAP device)
</li><li>raw IP packet and Ethernet frame transmission
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libdnet1 1.11 87.17 x86_64
=Sum: Library for Simple, Portable Interface to Low Level Networking Routines
+Des:
<!-- DT:Rich -->
<p>libdnet provides a simplified, portable interface to several low-level networking routines, including:
<ul>
<li>network address manipulation
</li><li>kernel arp(4) cache and route(4) table lookup and manipulation
</li><li>network firewalling (IP filter, ipfw, ipchains, pf, PktFilter, ...)
</li><li>network interface lookup and manipulation
</li><li>IP tunnelling (BSD/Linux tun, Universal TUN/TAP device)
</li><li>raw IP packet and Ethernet frame transmission
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libdrm-devel 2.4.17 0.3.12 x86_64
=Sum: Libraries, includes and more to develop libdrm applications
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdrm-devel-32bit 2.4.17 0.3.12 x86_64
=Sum: Libraries, includes and more to develop libdrm applications
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdv 1.0.0 80.28 x86_64
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdv-devel 1.0.0 80.28 x86_64
=Sum: The Quasar DV codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdv4 1.0.0 80.28 x86_64
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdv4-32bit 1.0.0 80.28 x86_64
=Sum: The Quasar DV Codec
+Des:
<!-- DT:Rich -->
<p>The Quasar DV codec (libdv) is a software codec for DV video, the encoding format used by most digital camcorders, typically those that support the IEEE 1394 (FireWire or i.Link) interface. Libdv was developed according to the official standards for DV video: IEC 61834 and SMPTE 314M.
</p><p>
There are two sample applications included with libdv: playdv and encode.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav-devel 4.1.3 1.16 x86_64
=Sum: Development Environment for libdvdnav
+Des:
<!-- DT:Rich -->
<p>This library contains functions to display DVD video menus.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav4 4.1.3 1.16 x86_64
=Sum: A DVD Navigation Library
+Des:
<!-- DT:Rich -->
<p>This library contains functions to display DVD video menus.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdread-devel 4.1.3 1.22 x86_64
=Sum: Development Environment for libdvdread
+Des:
<!-- DT:Rich -->
<p>This package contains the include-files and static libraries for libdvdread.
</p>
-Des:
##----------------------------------------
=Pkg: libdw-devel 0.137 8.22.58 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libdwarf 20080818 11.22 x86_64
=Sum: Documentation for libdwarf
+Des:
<!-- DT:Rich -->
<p>Documentation for libdwarf.
</p>
-Des:
##----------------------------------------
=Pkg: libdwarf-devel 20080818 11.22 x86_64
=Sum: Static libraries of libdwarf
+Des:
<!-- DT:Rich -->
<p>Contains the static libraries and header files of libdwarf.
</p><p>
Libdwarf is a library of functions to provide creation of DWARF debugging
information records, DWARF line number information, DWARF address range and
pubnames information, weak names information, and DWARF frame description
information.
</p>
-Des:
##----------------------------------------
=Pkg: libebl-devel 0.137 8.22.58 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libedit-devel 2.11.snap20080712 1.22 x86_64
=Sum: Development files for libedit
+Des:
<!-- DT:Rich -->
<p>libedit is a command line editing and history library.  It is designed to be
used by interactive programs that allow the user to type commands at a terminal
prompt.
</p><p>
This package holds the development files for libedit.
</p>
-Des:
##----------------------------------------
=Pkg: libedit0 2.11.snap20080712 1.22 x86_64
=Sum: A command line editing and history library
+Des:
<!-- DT:Rich -->
<p>libedit is a command line editing and history library.  It is designed to be
used by interactive programs that allow the user to type commands at a terminal
prompt.
</p>
-Des:
##----------------------------------------
=Pkg: libeigen 1.0.5 2.15 x86_64
=Sum: lightweight linear algebra C++ template library
+Des:
<!-- DT:Rich -->
<p>Eigen is a lightweight C++ template library for vector and matrix math,
a.k.a. linear algebra.
</p>
-Des:
##----------------------------------------
=Pkg: libeigen2-devel 2.0.90+svn933208 1.1.73 x86_64
=Sum: lightweight linear algebra C++ template library
+Des:
<!-- DT:Rich -->
<p>Eigen is a lightweight C++ template library for vector and matrix math,
a.k.a. linear algebra.
</p>
-Des:
##----------------------------------------
=Pkg: libelf-devel 0.137 8.22.58 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libelf0-devel 0.8.12 1.1.52 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libelf1-32bit 0.137 8.22.58 x86_64
=Sum: Library to read and write ELF files
+Des:
<!-- DT:Rich -->
<p>This package provide a high-level library to read and write ELF files.
This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: libesd-devel 0.2.41 3.1.41 x86_64
=Sum: EsounD development package
+Des:
<!-- DT:Rich -->
<p>EsounD development package.
</p>
-Des:
##----------------------------------------
=Pkg: libesmtp 1.0.4 157.15.1 x86_64
=Sum: A Library for Posting Electronic Mail
+Des:
<!-- DT:Rich -->
<p>libESMTP is a library to manage posting (or submission of) electronic mail using SMTP to a preconfigured Mail Transport Agent (MTA) such as Exim. It may be used as part of a Mail User Agent (MUA) or another program that must be able to post electronic mail but where mail functionality is not that program&#39;s primary purpose.
</p>
-Des:
##----------------------------------------
=Pkg: libesmtp-devel 1.0.4 157.15.1 x86_64
=Sum: A Library for Posting Electronic Mail
+Des:
<!-- DT:Rich -->
<p>libESMTP is a library to manage posting (or submission of) electronic mail using SMTP to a preconfigured Mail Transport Agent (MTA) such as Exim. It may be used as part of a Mail User Agent (MUA) or another program that must be able to post electronic mail but where mail functionality is not that program&#39;s primary purpose.
</p>
-Des:
##----------------------------------------
=Pkg: libevent-devel 1.4.5 24.21 x86_64
=Sum: Development files for libevent
+Des:
<!-- DT:Rich -->
<p>The libevent library provides a mechanism to execute a function when a
specific event on a file descriptor occurs or after a given time has passed.
</p><p>
This package holds the development files for libevent.
</p>
-Des:
##----------------------------------------
=Pkg: libevtlog-devel 0.2.7 4.22 x86_64
=Sum: Syslog-ng event logger library development files
+Des:
<!-- DT:Rich -->
<p>The EventLog library aims to be a replacement of the simple syslog() API
provided on UNIX systems. The major difference between EventLog and syslog
is that EventLog tries to add structure to messages.
</p><p>
EventLog provides an interface to build, format and output an event record.
The exact format and output method can be customized by the administrator
via a configuration file.
</p><p>
This package provides the development files.
The package may contain Novell/SUSE specific modifications/extensions,
please report problems using Bugzilla at https://bugzilla.novell.com/
before you contact the authors.
</p><p>
The official home page of syslog-ng is:
http://www.balabit.com/network-security/syslog-ng/
</p>
-Des:
##----------------------------------------
=Pkg: libevtlog0 0.2.7 4.22 x86_64
=Sum: Syslog-ng event logger library runtime
+Des:
<!-- DT:Rich -->
<p>The EventLog library aims to be a replacement of the simple syslog() API
provided on UNIX systems. The major difference between EventLog and syslog
is that EventLog tries to add structure to messages.
</p><p>
EventLog provides an interface to build, format and output an event record.
The exact format and output method can be customized by the administrator
via a configuration file.
</p><p>
This package provides the runtime part of the library.
</p><p>
The package may contain Novell/SUSE specific modifications/extensions,
please report problems using Bugzilla at https://bugzilla.novell.com/
before you contact the authors.
</p><p>
The official home page of syslog-ng is:
http://www.balabit.com/network-security/syslog-ng/
</p>
-Des:
##----------------------------------------
=Pkg: libexempi-devel 2.0.2 2.22 x86_64
=Sum: XMP support library
+Des:
<!-- DT:Rich -->
<p>XMP parsing and IO library
</p>
-Des:
##----------------------------------------
=Pkg: libexif-devel 0.6.17 2.12 x86_64
=Sum: An EXIF Tag Parsing Library for Digital Cameras (Development files)
+Des:
<!-- DT:Rich -->
<p>This library is used to parse EXIF information from JPEGs created by
digital cameras.
</p>
-Des:
##----------------------------------------
=Pkg: libexiv2-4-32bit 0.17.1 31.20 x86_64
=Sum: Library to access image metadata
+Des:
<!-- DT:Rich -->
<p>libexiv2 is a C++ library with a C compatibility interface to access image metadata, esp from Exif tags.
</p>
-Des:
##----------------------------------------
=Pkg: libexiv2-devel 0.17.1 31.20 x86_64
=Sum: Development Headers for Exiv2
+Des:
<!-- DT:Rich -->
<p>Exiv2 is a C++ library and a command line utility to access image metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libexpat-devel 2.0.1 88.26.1 x86_64
=Sum: Outils d'analyse syntaxique XML
+Des:
<!-- DT:Rich -->
<p>Expat is an XML 1.0 parser written in C. It aims to be fully
conformant. It is currently not a validating XML processor. The current
production version of expat can be downloaded from
ftp://ftp.jclark.com/pub/xml/expat.zip.
The directory xmltok contains a low-level library for tokenizing
XML. The interface is documented in xmltok/xmltok.h.
The directory xmlparse contains an XML parser library that is built on
top of the xmltok library. The interface is documented in
xmlparse/xmlparse.h. The directory sample contains a simple example
program using this interface. The directory sample/build.bat is a batch file to build
the example using Visual C++.
The directory xmlwf contains the xmlwf application, which uses the
xmlparse library. The arguments to xmlwf are one or more files to
check for well-formedness. An option -d dir can be
specified. For each well-formed input file, the corresponding canonical
XML is written to dir/f, where f is the filename (without any path)
of the input file. A -x option causes references to external general
entities to be processed. A -s option makes documents that are not
stand-alone cause an error (a document is considered stand-alone if
it is intrinsically stand-alone because it has no external subset and no
references to parameter entities in the internal subset or it is
declared as stand-alone in the XML declaration).
</p>
-Des:
##----------------------------------------
=Pkg: libext2fs-devel 1.41.9 2.1.51 x86_64
=Sum: Development files for libext2fs
+Des:
<!-- DT:Rich -->
<p>Development files for libext2fs.
</p>
-Des:
##----------------------------------------
=Pkg: libext2fs-devel-32bit 1.41.9 2.1.51 x86_64
=Sum: Development files for libext2fs
+Des:
<!-- DT:Rich -->
<p>Development files for libext2fs.
</p>
-Des:
##----------------------------------------
=Pkg: libext2fs2-32bit 1.41.9 2.1.51 x86_64
=Sum: Ext2fs libray
+Des:
<!-- DT:Rich -->
<p>The basic Ext2fs library.
</p>
-Des:
##----------------------------------------
=Pkg: libfarsight-0_1-3 0.1.28 1.36 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libffi-devel-32bit 4.3 62.198 x86_64
=Sum: The system GNU Foreign Function Interface library development files
+Des:
<!-- DT:Rich -->
<p>The system GNU Foreign Function Interface library development files.
</p>
-Des:
##----------------------------------------
=Pkg: libffi-devel 4.3 62.198 x86_64
=Sum: The system GNU Foreign Function Interface library development files
+Des:
<!-- DT:Rich -->
<p>The system GNU Foreign Function Interface library development files.
</p>
-Des:
##----------------------------------------
=Pkg: libffi43-32bit 4.3.4_20091019 0.7.25 x86_64
=Sum: Foreign Function Interface library
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libffi43 4.3.4_20091019 0.7.25 x86_64
=Sum: Foreign Function Interface library
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libffi43-devel-32bit 4.3.4_20091019 0.7.25 x86_64
=Sum: Foreign Function Interface library development files
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libffi43-devel 4.3.4_20091019 0.7.25 x86_64
=Sum: Foreign Function Interface library development files
+Des:
<!-- DT:Rich -->
<p>A foreign function interface is the popular name for the interface that allows code written in one language to call code written in another language.
</p>
-Des:
##----------------------------------------
=Pkg: libflaim-devel 4.9.1046 39.22 x86_64
=Sum: Embeddable cross-platform database engine
+Des:
<!-- DT:Rich -->
<p>FLAIM is an embeddable cross-platform database engine that provides a rich, powerful, easy-to-use feature set. It is the database engine used by Novell eDirectory. It has proven to be highly scalable, reliable, and robust. It is available on a wide variety of 32 bit and 64 bit platforms.
</p>
-Des:
##----------------------------------------
=Pkg: libfprint-devel 0.0.6 9.16 x86_64
=Sum: Library for fingerprint reader support (developer files)
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and development documentation for libfprint. If you like to develop programs using libfprint, you will need to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: libfreebob 1.0.11 1.15 x86_64
=Sum: Free driver implementation for BeBoB platform
+Des:
<!-- DT:Rich -->
<p>FreeBoB is a free driver implementation for BeBoB platform.
The BeBoB is used in many available IEEE 1394 (aka FireWire or i-Link)
based break-out boxes.
</p>
-Des:
##----------------------------------------
=Pkg: libfreebob-32bit 1.0.11 1.15 x86_64
=Sum: Free driver implementation for BeBoB platform
+Des:
<!-- DT:Rich -->
<p>FreeBoB is a free driver implementation for BeBoB platform.
The BeBoB is used in many available IEEE 1394 (aka FireWire or i-Link)
based break-out boxes.
</p>
-Des:
##----------------------------------------
=Pkg: libfreebob-devel 1.0.11 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libg2c33 3.3.3 11.9 x86_64
=Sum: The GNU G77 Fortran Compiler Runtime
+Des:
<!-- DT:Rich -->
<p>This is the Fortran 77 Runtime of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: libg2c33-32bit 3.3.3 11.9 x86_64
=Sum: The GNU G77 Fortran Compiler Runtime
+Des:
<!-- DT:Rich -->
<p>This is the Fortran 77 Runtime of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: libgadu 1.8.2 1.22 x86_64
=Sum: Library for Handling of Gadu-Gadu Instant Messaging
+Des:
<!-- DT:Rich -->
<p>libgadu is a library for handling of protocol of a popular Polish instant messenger Gadu-Gadu.
</p>
-Des:
##----------------------------------------
=Pkg: libgadu-devel 1.8.2 1.22 x86_64
=Sum: Library for Handling of Gadu-Gadu Instant Messaging
+Des:
<!-- DT:Rich -->
<p>libgadu is a library for handling of protocol of a popular Polish instant messenger Gadu-Gadu.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome 1.20.1 2.41 x86_64
=Sum: GNOME Accessibility Implementation Library for gnomeui and libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the ATK interfaces for GNOME widgets.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome-32bit 1.20.1 2.41 x86_64
=Sum: GNOME Accessibility Implementation Library for gnomeui and libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the ATK interfaces for GNOME widgets.
</p>
-Des:
##----------------------------------------
=Pkg: libgail-gnome-devel 1.20.1 2.41 x86_64
=Sum: GNOME Accessibility Implementation Library for gnomeui and libbonoboui
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the ATK interfaces for GNOME widgets.
</p>
-Des:
##----------------------------------------
=Pkg: libgcc45 4.5.0_20100414 1.2.7 x86_64
=Sum: C compiler runtime library
+Des:
<!-- DT:Rich -->
<p>Libgcc is needed for dynamically linked C programs.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj-devel 4.3 62.198 x86_64
=Sum: The system GNU Java development files.
+Des:
<!-- DT:Rich -->
<p>The system GNU Java development files.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-32bit 4.3.4_20091019 0.7.33 x86_64
=Sum: Java Runtime Library for gcc
+Des:
<!-- DT:Rich -->
<p>This library is needed if you want to use the GNU Java compiler, gcj.
Source code for this package is in gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43 4.3.4_20091019 0.7.33 x86_64
=Sum: Java Runtime Library for gcc
+Des:
<!-- DT:Rich -->
<p>This library is needed if you want to use the GNU Java compiler, gcj.
Source code for this package is in gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-devel-32bit 4.3.4_20091019 0.7.33 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-devel 4.3.4_20091019 0.7.33 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj43-jar 4.3.4_20091019 0.7.33 x86_64
=Sum: Java runtime library (jar files).
+Des:
<!-- DT:Rich -->
<p>These are the jar files that go along with the gcj front end to gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libgcj_bc43 4.3.4_20091019 0.7.33 x86_64
=Sum: Fake library for BC-ABI compatibility.
+Des:
<!-- DT:Rich -->
<p>A fake library that is used at link time only. It ensures that
binaries built with the BC-ABI link against a constant SONAME.
This way, BC-ABI binaries continue to work if the SONAME underlying
libgcj.so changes.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt-devel 1.4.1 6.7 x86_64
=Sum: The GNU Crypto Library
+Des:
<!-- DT:Rich -->
<p>Libgcrypt is a general purpose crypto library based on the code used in
GnuPG (alpha version).
</p><p>
This package contains needed files to compile and link against the library.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt-devel-32bit 1.4.1 6.7 x86_64
=Sum: The GNU Crypto Library
+Des:
<!-- DT:Rich -->
<p>Libgcrypt is a general purpose crypto library based on the code used in
GnuPG (alpha version).
</p><p>
This package contains needed files to compile and link against the library.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-3_0-devel 3.1.5 2.1.76 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgda-4_0-devel 4.1.2 1.3.48 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgegl-0_0-0 0.0.20 1.35 x86_64
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: libgeoclue-devel 0.11.1 1.6.130 x86_64
=Sum: Modular Geoinformation Service - Development Files
+Des:
<!-- DT:Rich -->
<p>Geoclue is a modular geoinformation service built on top of the D-Bus
messaging system. The goal of the Geoclue project is to make creating
location-aware applications as simple as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libgeoclue0 0.11.1 1.6.130 x86_64
=Sum: Modular Geoinformation Service - Library
+Des:
<!-- DT:Rich -->
<p>Geoclue is a modular geoinformation service built on top of the D-Bus
messaging system. The goal of the Geoclue project is to make creating
location-aware applications as simple as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libgfortran43-32bit 4.3.4_20091019 0.7.35 x86_64
=Sum: The GNU Fortran Compiler Runtime Library
+Des:
<!-- DT:Rich -->
<p>The runtime library needed to run programs compiled with the Fortran compiler of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: libgfortran43 4.3.4_20091019 0.7.35 x86_64
=Sum: The GNU Fortran Compiler Runtime Library
+Des:
<!-- DT:Rich -->
<p>The runtime library needed to run programs compiled with the Fortran compiler of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: libgfortran45 4.5.0_20100414 1.2.7 x86_64
=Sum: The GNU Fortran Compiler Runtime Library
+Des:
<!-- DT:Rich -->
<p>The runtime library needed to run programs compiled with the Fortran compiler of the GNU Compiler Collection (GCC).
</p>
-Des:
##----------------------------------------
=Pkg: libggz2 0.0.14.1 4.16 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: libggz2-devel 0.0.14.1 4.16 x86_64
=Sum: Le projet GGZ rend possible les jeux gratuit online
+Des:
<!-- DT:Rich -->
<p>Le projet GGZ rend possible les jeux gratuit online.
</p>
-Des:
##----------------------------------------
=Pkg: libgimpprint-devel 4.2.7 32.27.31 x86_64
=Sum: Gimp-Print Include Files
+Des:
<!-- DT:Rich -->
<p>This package provides the Gimp-Print include files.
</p>
-Des:
##----------------------------------------
=Pkg: libgio-fam 2.22.5 0.2.23 x86_64
=Sum: Une bibliothèque pratique avec des fonctions écrites en C
+Des:
<!-- DT:Rich -->
<p>Cette bibliothèque fournie des fonctions pratiques, comme le listing et
le hachage, pour un programmeur en C et est utilisé par GTK+ et GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: libgirepository-1_0-0 0.6.5 1.1.67 x86_64
=Sum: GObject Introspection Tools
+Des:
<!-- DT:Rich -->
<p>The goal of the project is to describe the APIs and collect them in
a uniform, machine readable format.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2-devel 2.6.4 1.2.267 x86_64
=Sum: Inclue les fichier et bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications that use libglade2.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2-doc 2.6.4 1.2.267 x86_64
=Sum: Documentation for the Glade library
+Des:
<!-- DT:Rich -->
<p>This package contains documentation and examples for the Glade library.
</p>
-Des:
##----------------------------------------
=Pkg: libglademm 2.6.7 1.29.213 x86_64
=Sum: C++ Interface for libglade (Part of GNOME Project)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libglade. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libglade with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: libglademm-2_4-1 2.6.7 1.29.213 x86_64
=Sum: C++ Interface for libglade (Part of GNOME Project)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libglade. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libglade with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: libglademm-devel 2.6.7 1.29.213 x86_64
=Sum: C++ interface for libglade (a part of GNOME project)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libglade. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libglade with flexible object-oriented framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgladeui-1-8 3.5.2 8.17 x86_64
=Sum: User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: libgladeui-1-9 3.6.7 2.1.179 x86_64
=Sum: User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: libgladeui-1_0-devel 3.6.7 2.1.179 x86_64
=Sum: Development Files for for User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-bluetooth7 2.28.6 0.1.162 x86_64
=Sum: GNOME Bluetooth graphical utilities
+Des:
<!-- DT:Rich -->
<p>The gnome-bluetooth package contains graphical utilities to setup,
monitor and use Bluetooth devices.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-certauth0 0.3 3.21 x86_64
=Sum: Authentification facile par certificat sous GNOME
+Des:
<!-- DT:Rich -->
<p>Gnome Certificate Authentication provides a mechanism for Evolution to authenticate over SSL using certificates.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-certauth0-32bit 0.3 3.21 x86_64
=Sum: Authentification facile par certificat sous GNOME
+Des:
<!-- DT:Rich -->
<p>Gnome Certificate Authentication provides a mechanism for Evolution to authenticate over SSL using certificates.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-devel 2.28.0 1.2.198 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-doc 2.28.0 1.2.198 x86_64
=Sum: Additional Package Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries for the GNOME 2.x platform.
GNOME itself contains no specific window manager thus you are totally
free in your choice of one. Many GNOME users like Sawfish, Enlightenment, or
IceWM as window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: libgnome-window-settings-devel 2.28.1 0.6.4 x86_64
=Sum: Utility library for getting window manager settings - Development Files
+Des:
<!-- DT:Rich -->
<p>This library is used by the GNOME control center to change preferences
of window managers.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-devel 2.26.0 1.2.231 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas-doc 2.26.0 1.2.231 x86_64
=Sum: Additional Package Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package&#39;s base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvasmm 2.26.0 1.1.211 x86_64
=Sum: C++ Interface for libgnomecanvas (a GUI Library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libgnomecanvas. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libgnomecanvas with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvasmm-devel 2.26.0 1.1.211 x86_64
=Sum: C++ Interface for libgnomecanvas (a GUI library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for libgnomecanvas. It is a subpackage
of the gnomemm project. The interface provides a convenient interface for C++
programmers to use libgnomecanvas with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups-32bit 0.2.3 109.19 x86_64
=Sum: GNOME CUPS Library
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups-devel 0.2.3 109.19 x86_64
=Sum: GNOME CUPS Library
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb-devel 3.1.2 88.7.22 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomekbd-devel 2.28.2 1.1.164 x86_64
=Sum: GNOME Keyboard Library
+Des:
<!-- DT:Rich -->
<p>GNOME keyboard library, utility and applet.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomemm 2.28.0 1.1.198 x86_64
=Sum: C++ Interface for GNOME Libraries (a GUI Library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GnomeUI.  It is a subpackage
of the GTK-- project.  The interface provides a convenient interface for C++
programmers to create GNOME GUIs with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomemm-devel 2.28.0 1.1.198 x86_64
=Sum: C++ Interface for GNOME libs (a GUI library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GnomeUI.  It is a subpackage
of the GTK-- project.  The interface provides a convenient interface for C++
programmers to create GNOME GUIs with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-32bit 2.18.6 2.1.357 x86_64
=Sum: The GNOME 2.x Printing Library
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x printing library, which provides a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-devel 2.18.6 2.1.357 x86_64
=Sum: Include files and libraries mandatory for development with libgnomeprint
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications that use libgnomeprint.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint-doc 2.18.6 2.1.357 x86_64
=Sum: Documentation for libgnomeprint
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for the GNOME 2.x printing library, which provide a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-32bit 2.18.4 2.1.218 x86_64
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>This library contains all user-interface related functions to the GNOME printing subsystem.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-devel 2.18.4 2.1.218 x86_64
=Sum: Include files and libraries mandatory for development with libgnomeprintui
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and link applications that use libgnomeprintui.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui-doc 2.18.4 2.1.218 x86_64
=Sum: Documentation for libgnomeprintui
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for the the user-facing parts of the GNOME 2.x printing library, which provide a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu-devel 1.0.0 307.5.12 x86_64
=Sum: Development files for libgnomesu
+Des:
<!-- DT:Rich -->
<p>This package contains all files needed to develop with libgnomesu.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-devel 2.24.2 1.1.187 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui-doc 2.24.2 1.1.187 x86_64
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This library contains all the User-Interface related functions for GNOME-based Software. You need the libgnomeui-devel package too if you want to develop GNOME 2.x Desktop-based Software.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeuimm 2.28.0 1.1.180 x86_64
=Sum: C++ Interface for GnomeUI (a GUI Library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GnomeUI.  It is a subpackage
of the GTK-- project.  The interface provides a convenient interface for C++
programmers to create GNOME GUIs with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeuimm-devel 2.28.0 1.1.180 x86_64
=Sum: C++ Interface for GnomeUI (a GUI library for X)
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for GnomeUI.  It is a subpackage
of the GTK-- project.  The interface provides a convenient interface for C++
programmers to create GNOME GUIs with GTK+&#39;s flexible object-oriented
framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomevfsmm-2_6-1 2.26.0 1.1.214 x86_64
=Sum: C++ Wrapper for gnome-vfs
+Des:
<!-- DT:Rich -->
<p>This package is part of the gnomemm project and provides a C++ interface for gnome-vfs.
</p>
-Des:
##----------------------------------------
=Pkg: libgnutls-devel 2.4.1 24.19.1 x86_64
=Sum: Development package for gnutls
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using gnutls.
</p>
-Des:
##----------------------------------------
=Pkg: libgnutls-extra-devel 2.4.1 24.19.1 x86_64
=Sum: La bibliothèque GNU de sécurité au niveau de la couche transport
+Des:
<!-- DT:Rich -->
<p>The GnuTLS project aims to develop a library that provides a secure layer
over a reliable transport layer. Currently the GnuTLS library implements the
proposed standards of the IETF&#39;s TLS working group.
</p>
-Des:
##----------------------------------------
=Pkg: libgnutls-extra26 2.4.1 24.19.1 x86_64
=Sum: La bibliothèque GNU de sécurité au niveau de la couche transport
+Des:
<!-- DT:Rich -->
<p>The GnuTLS project aims to develop a library that provides a secure layer
over a reliable transport layer. Currently the GnuTLS library implements the
proposed standards of the IETF&#39;s TLS working group.
</p>
-Des:
##----------------------------------------
=Pkg: libgomp45 4.5.0_20100414 1.2.7 x86_64
=Sum: The GNU compiler collection OpenMP runtime library
+Des:
<!-- DT:Rich -->
<p>This is the OpenMP runtime library needed by OpenMP enabled programs that were
built with the -fopenmp compiler option and by programs that were
auto-parallelized via the -ftree-parallelize-loops compiler option.
</p>
-Des:
##----------------------------------------
=Pkg: libgoocanvas3 0.12 1.26 x86_64
=Sum: A cairo-based canvas widget for GTK+
+Des:
<!-- DT:Rich -->
<p>GooCanvas is similar in many ways to GnomeCanvas and FooCanvas.
But it uses cairo for rendering, has an optional model/view split,
and uses interfaces for items &amp; models (so you can easily turn any
application object into a canvas item or model).
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error-devel 1.6 8.6 x86_64
=Sum: Development package for libgpg-error
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using libgpg-error.
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error-devel-32bit 1.6 8.6 x86_64
=Sum: Development package for libgpg-error
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using libgpg-error.
</p>
-Des:
##----------------------------------------
=Pkg: libgpgme-devel 1.1.6 25.30 x86_64
=Sum: A Library Designed to give Applications easy Access to GnuPG
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications.
It provides a high-level Crypto API for encryption, decryption, signing, signature
verification, and key management. Currently it uses GnuPG as its back-end, but the API is not
restricted to this engine.
</p><p>
Who Should use GPGME?
</p><p>
Because the direct use of GnuPG from an application can be a complicated programming task,
it is suggested that all software should try to use GPGME instead. This way bug fixes or
improvements can be done at a central place and every application benefits from this.
Authors of MUAs should especially consider using GPGME. Creating a set of standard
widgets for common key selection tasks is even planned.
</p>
-Des:
##----------------------------------------
=Pkg: libgpgme11-32bit 1.1.6 25.30 x86_64
=Sum: A Library Designed to give Applications easy Access to GnuPG
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG
easier for applications. It provides a high-level Crypto API for
encryption, decryption, signing, signature verification, and key
management. Currently it uses GnuPG as its back-end, but the API is not
restricted to this engine.
</p><p>
Who Should use GPGME?
</p><p>
Because the direct use of GnuPG from an application can be a
complicated programming task, it is suggested that all software should
try to use GPGME instead. This way bug fixes or improvements can be
done at a central place and every application benefits from this.
Authors of MUAs should especially consider using GPGME. Creating a set
of standard widgets for common key selection tasks is even planned.
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2-32bit 2.4.3 3.25.73 x86_64
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
gphoto2 --list-cameras
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2-devel 2.4.3 3.25.73 x86_64
=Sum: Development headers for libgphoto2
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
</p><p>
These are its development libraries and headers.
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-devel 0.6.0 84.29 x86_64
=Sum: Development files for libgpod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. This package includes the libraries and header files for libgpod
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-lang 0.6.0 84.29 x86_64
=Sum: libgpod translations
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. This package includes the translations for libgpod
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-python 0.6.0 84.29 x86_64
=Sum: A python module to access iPod content with libgpod
+Des:
<!-- DT:Rich -->
<p>A python module to access iPod content. This module provides bindings to the
libgpod library.
</p>
-Des:
##----------------------------------------
=Pkg: libgpod-tools 0.6.0 84.29 x86_64
=Sum: Tools for libgpod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content. This package includes support tools for libgpod
</p>
-Des:
##----------------------------------------
=Pkg: libgpod3 0.6.0 84.29 x86_64
=Sum: Library to Manipulate Songs and Playlists Stored on an iPod
+Des:
<!-- DT:Rich -->
<p>libgpod is a library meant to abstract access to iPod content.
It provides an easy-to-use API to retrieve the list of files and playliststored on an iPod, modify them, and save them back to the iPod.
</p>
-Des:
##----------------------------------------
=Pkg: libgsf-devel 1.14.9 2.27 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgsf-doc 1.14.9 2.27 x86_64
=Sum: Additional Package Documentation.
+Des:
<!-- DT:Rich -->
<p>This package contains optional documentation provided in addition to this package&#39;s base documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libgsm-devel 1.0.12 2.21 x86_64
=Sum: GSM 06.10 Lossy Speech Compressor Library and Utilities
+Des:
<!-- DT:Rich -->
<p>Contains libraries and binaries for a GSM speech compressor.
libgsm contains a standard implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s.
GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility with typical UNIX applications, our implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker recognition. Even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate).
The interfaces offered are a front-end modeled after compress(1) and a library API.  Compression and decompression run faster than real-time on most SPARC stations.  The implementation has been verified against the ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgsm1 1.0.12 2.21 x86_64
=Sum: GSM 06.10 Lossy Speech Compressor Library and Utilities
+Des:
<!-- DT:Rich -->
<p>Contains libraries and binaries for a GSM speech compressor.
libgsm contains a standard implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s.
GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility with typical UNIX applications, our implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker recognition. Even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate).
The interfaces offered are a front-end modeled after compress(1) and a library API.  Compression and decompression run faster than real-time on most SPARC stations.  The implementation has been verified against the ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgssdp-1_0-2 0.7.0 1.1.202 x86_64
=Sum: Library for resource discovery and announcement over SSDP
+Des:
<!-- DT:Rich -->
<p>gssdp offers a GObject-based API for handling resource discovery and
announcement over SSDP.
</p>
-Des:
##----------------------------------------
=Pkg: libgssdp-devel 0.7.0 1.1.202 x86_64
=Sum: Library for resource discovery and announcement over SSDP - Development Files
+Des:
<!-- DT:Rich -->
<p>gssdp offers a GObject-based API for handling resource discovery and
announcement over SSDP.
</p>
-Des:
##----------------------------------------
=Pkg: libgssglue-devel 0.1 6.22 x86_64
=Sum: Generic GSSAPI Library
+Des:
<!-- DT:Rich -->
<p>This library exports a gssapi interface, but does not implement any gssapi
mechanisms itself. Instead it calls gssapi routines in other libraries,
depending on the mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: libgstfarsight-0_10-0 0.0.16 1.1.169 x86_64
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml-32bit 2.11.1 64.23.220 x86_64
=Sum: A Library for HTML Support in GTK2.0
+Des:
<!-- DT:Rich -->
<p>Libgtkhtml provides extensions for GTK to handle the HTML format. It is widely used by applications for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml-devel 2.11.1 64.23.220 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop-2_0-7-32bit 2.28.0 1.2.20 x86_64
=Sum: LibGTop Library
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop-devel 2.28.0 1.2.20 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-1_0-3 0.13.0 1.1.193 x86_64
=Sum: Implementation of the UPnP specification
+Des:
<!-- DT:Rich -->
<p>GUPnP implements the UPnP specification: resource announcement and
discovery, description, control, event notification, and presentation
(GUPnP includes basic web server functionality through libsoup). GUPnP
does not include helpers for construction or control of specific
standardized resources (e.g. MediaServer); this is left for higher level
libraries utilizing the GUPnP framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-devel 0.13.0 1.1.193 x86_64
=Sum: Implementation of the UPnP specification - Development Files
+Des:
<!-- DT:Rich -->
<p>GUPnP implements the UPnP specification: resource announcement and
discovery, description, control, event notification, and presentation
(GUPnP includes basic web server functionality through libsoup). GUPnP
does not include helpers for construction or control of specific
standardized resources (e.g. MediaServer); this is left for higher level
libraries utilizing the GUPnP framework.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-igd-1_0-2 0.1.3 2.1.183 x86_64
=Sum: Library to handle UPnP IGD port mapping
+Des:
<!-- DT:Rich -->
<p>gupnp-igd is a library to handle UPnP IGD port mapping. It is supposed
to have a very simple API.
</p>
-Des:
##----------------------------------------
=Pkg: libgupnp-igd-devel 0.1.3 2.1.183 x86_64
=Sum: Library to handle UPnP IGD port mapping - Development Files
+Des:
<!-- DT:Rich -->
<p>gupnp-igd is a library to handle UPnP IGD port mapping. It is supposed
to have a very simple API.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather-devel 2.28.0 1.4.8 x86_64
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libgwenhywfar38 2.6.2 34.32 x86_64
=Sum: A Multiplatform Helper Library for Other Libraries
+Des:
<!-- DT:Rich -->
<p>Gwenhywfar is a base library used to provide OS abstraction functions for Linux,
FreeBSD, OpenBSD, NetBSD, and Windows.  It also includes some often needed
functions (for example, for handling and parsing of configuration files, reading and writing
of XML files, and interprocess communication). It is used by OpenHBCI2,
Libchipcard2, Simthetic, AqBanking, and QBankManager.
</p>
-Des:
##----------------------------------------
=Pkg: libgypsy-devel 0.7 1.6.54 x86_64
=Sum: GPS multiplexing daemon - Development Files
+Des:
<!-- DT:Rich -->
<p>Gypsy is a GPS multiplexing daemon which allows multiple clients to
access GPS data from multiple GPS sources concurrently.
</p><p>
Without some sort of multiplexing system, a GPS device can only safely
be accessed by one client. In a server situation this may not cause any
problems, but on modern desktop which could potentially have multiple
location aware devices, this could be an issue.
</p>
-Des:
##----------------------------------------
=Pkg: libgypsy0 0.7 1.6.54 x86_64
=Sum: GPS multiplexing daemon - Library
+Des:
<!-- DT:Rich -->
<p>Gypsy is a GPS multiplexing daemon which allows multiple clients to
access GPS data from multiple GPS sources concurrently.
</p><p>
Without some sort of multiplexing system, a GPS device can only safely
be accessed by one client. In a server situation this may not cause any
problems, but on modern desktop which could potentially have multiple
location aware devices, this could be an issue.
</p>
-Des:
##----------------------------------------
=Pkg: libhangul-devel 0.0.9 3.1.41 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libhippocanvas-1-0 0.3.0 3.35 x86_64
=Sum: Cairo/GObject/GTK+ based canvas
+Des:
<!-- DT:Rich -->
<p>Cairo/GObject/GTK+ based canvas
</p>
-Des:
##----------------------------------------
=Pkg: libhowl0 0.6.23 11.19.22 x86_64
=Sum: howl Compatibility Package for D-BUS Service for Zeroconf/Bonjour
+Des:
<!-- DT:Rich -->
<p>howl compatibility layer for avahi.
</p><p>
Avahi is an Implementation the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete implementing all MUSTs and the majority of the SHOULDs of the mDNS/DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition it supports some nifty things that have never been seen elsewhere like correct mDNS reflection accross LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: libibcm 1.0.4 4.12 x86_64
=Sum: Userspace Infiniband Connection Management API
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libibcm provides a userspace
InfiniBand Connection Managment API.
</p>
-Des:
##----------------------------------------
=Pkg: libibcm-32bit 1.0.4 4.12 x86_64
=Sum: Userspace Infiniband Connection Management API
+Des:
<!-- DT:Rich -->
<p>Along with the OpenIB kernel drivers, libibcm provides a userspace
InfiniBand Connection Managment API.
</p>
-Des:
##----------------------------------------
=Pkg: libibcm-devel 1.0.4 4.12 x86_64
=Sum: Development files for the libibcm library
+Des:
<!-- DT:Rich -->
<p>Development files for the libibcm library.
</p>
-Des:
##----------------------------------------
=Pkg: libibcm-devel-32bit 1.0.4 4.12 x86_64
=Sum: Development files for the libibcm library
+Des:
<!-- DT:Rich -->
<p>Development files for the libibcm library.
</p>
-Des:
##----------------------------------------
=Pkg: libibcommon-devel 1.1.2_20081020 5.12 x86_64
=Sum: Development files for the libibcommon library
+Des:
<!-- DT:Rich -->
<p>Development files for the libibcommon library
</p>
-Des:
##----------------------------------------
=Pkg: libibcommon-devel-32bit 1.1.2_20081020 5.12 x86_64
=Sum: Development files for the libibcommon library
+Des:
<!-- DT:Rich -->
<p>Development files for the libibcommon library
</p>
-Des:
##----------------------------------------
=Pkg: libibcommon1 1.1.2_20081020 5.12 x86_64
=Sum: Common Utility functions for IB diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibcommon provides common utility functions for the IB diagnostic and
management tools
</p>
-Des:
##----------------------------------------
=Pkg: libibcommon1-32bit 1.1.2_20081020 5.12 x86_64
=Sum: Common Utility functions for IB diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibcommon provides common utility functions for the IB diagnostic and
management tools
</p>
-Des:
##----------------------------------------
=Pkg: libibmad-devel 1.2.3_20081118 2.10 x86_64
=Sum: Development files for the libibmad library.
+Des:
<!-- DT:Rich -->
<p>Development files for the libibmad library.
</p>
-Des:
##----------------------------------------
=Pkg: libibmad-devel-32bit 1.2.3_20081118 2.10 x86_64
=Sum: Development files for the libibmad library.
+Des:
<!-- DT:Rich -->
<p>Development files for the libibmad library.
</p>
-Des:
##----------------------------------------
=Pkg: libibmad1 1.2.3_20081118 2.10 x86_64
=Sum: Low layer Infiniband diagnostic and management programs
+Des:
<!-- DT:Rich -->
<p>libibmad provides low layer IB functions for use by the IB diagnostic and management programs. These include MAD, SA, SMP, and other basic IB functions
</p>
-Des:
##----------------------------------------
=Pkg: libibmad1-32bit 1.2.3_20081118 2.10 x86_64
=Sum: Low layer Infiniband diagnostic and management programs
+Des:
<!-- DT:Rich -->
<p>libibmad provides low layer IB functions for use by the IB diagnostic and management programs. These include MAD, SA, SMP, and other basic IB functions
</p>
-Des:
##----------------------------------------
=Pkg: libibumad-devel 1.2.3_20081118 2.11 x86_64
=Sum: Development files for the libibumad library.
+Des:
<!-- DT:Rich -->
<p>Development files for the libibumad library.
</p>
-Des:
##----------------------------------------
=Pkg: libibumad-devel-32bit 1.2.3_20081118 2.11 x86_64
=Sum: Development files for the libibumad library.
+Des:
<!-- DT:Rich -->
<p>Development files for the libibumad library.
</p>
-Des:
##----------------------------------------
=Pkg: libibumad1 1.2.3_20081118 2.11 x86_64
=Sum: User MAD library functions on top of user MAD modules for Infiniband diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibumad provides the user MAD library functions which sit on top of
the user MAD modules in the kernel. These are used by the IB diagnostic
and management tools, including OpenSM
</p>
-Des:
##----------------------------------------
=Pkg: libibumad1-32bit 1.2.3_20081118 2.11 x86_64
=Sum: User MAD library functions on top of user MAD modules for Infiniband diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibumad provides the user MAD library functions which sit on top of
the user MAD modules in the kernel. These are used by the IB diagnostic
and management tools, including OpenSM
</p>
-Des:
##----------------------------------------
=Pkg: libibverbs 1.1.2 8.15 x86_64
=Sum: Infiniband verbs library
+Des:
<!-- DT:Rich -->
<p>libibverbs is a library that allows userspace processes to use
InfiniBand &quot;verbs&quot; as described in the InfiniBand Architecture
Specification.  This includes direct hardware access for fast path
operations.
</p>
-Des:
##----------------------------------------
=Pkg: libibverbs-32bit 1.1.2 8.15 x86_64
=Sum: Infiniband verbs library
+Des:
<!-- DT:Rich -->
<p>libibverbs is a library that allows userspace processes to use
InfiniBand &quot;verbs&quot; as described in the InfiniBand Architecture
Specification.  This includes direct hardware access for fast path
operations.
</p>
-Des:
##----------------------------------------
=Pkg: libibverbs-devel 1.1.2 8.15 x86_64
=Sum: Development files for the libibverbs library
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for the libibverbs verbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libibverbs-devel-32bit 1.1.2 8.15 x86_64
=Sum: Development files for the libibverbs library
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for the libibverbs verbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libica-1_3_9 1.3.9 6.6 x86_64
=Sum: An Interface Library for the ICA Device Driver
+Des:
<!-- DT:Rich -->
<p>This package contains the interface library routines used by IBM modules to interface with the IBM
eServer Cryptographic Accelerator (ICA).
</p>
-Des:
##----------------------------------------
=Pkg: libica-1_3_9-32bit 1.3.9 6.6 x86_64
=Sum: An Interface Library for the ICA Device Driver
+Des:
<!-- DT:Rich -->
<p>This package contains the interface library routines used by IBM modules to interface with the IBM
eServer Cryptographic Accelerator (ICA).
</p>
-Des:
##----------------------------------------
=Pkg: libical-devel 0.43 1.1.40 x86_64
=Sum: An implementation of basic iCAL protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an Open Source implementation of the IETF&#39;s iCalendar Calendaring and Scheduling protocols. (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libical0-32bit 0.43 1.1.40 x86_64
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF&#39;s iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libicecream-devel 0.9.2 1.22 x86_64
=Sum: For Distributed Compile in the Network
+Des:
<!-- DT:Rich -->
<p>icecream is the next generation distcc.
</p>
-Des:
##----------------------------------------
=Pkg: libicu-32bit 4.0 7.24.11 x86_64
=Sum: International Components for Unicode (development files)
+Des:
<!-- DT:Rich -->
<p>ICU is a set of C and C++ libraries that provides robust and
full-featured Unicode support. This package contains the runtime
libraries for ICU. It does not contain any of the data files needed at
runtime and present in the `icu&#39; and `icu-locales` packages.
</p>
-Des:
##----------------------------------------
=Pkg: libicu-devel-32bit 4.0 7.24.11 x86_64
=Sum: International Components for Unicode (development files)
+Des:
<!-- DT:Rich -->
<p>ICU is a C++ and C library that provides robust and full-featured Unicode
support. This package contains the development files for ICU.
</p>
-Des:
##----------------------------------------
=Pkg: libicu-devel 4.0 7.24.11 x86_64
=Sum: International Components for Unicode (development files)
+Des:
<!-- DT:Rich -->
<p>ICU is a C++ and C library that provides robust and full-featured Unicode
support. This package contains the development files for ICU.
</p>
-Des:
##----------------------------------------
=Pkg: libid3tag 0.15.1b 130.17 x86_64
=Sum: ID3 Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libid3tag is a library for reading and writing ID3 tags, both
ID3v1 and the various versions of ID3v2.
</p>
-Des:
##----------------------------------------
=Pkg: libid3tag-devel 0.15.1b 130.17 x86_64
=Sum: Development package for libid3tag library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries needed to develop applications with libid3tag.
</p>
-Des:
##----------------------------------------
=Pkg: libidl-devel 0.8.13 1.1.57 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA v2.2
compliant Interface Definition Language (IDL) files, which is a
specification for defining interfaces which can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidn-devel 1.10 3.18 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>GNU Libidn is an implementation of the Stringprep, Punycode, and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group. It is used to prepare internationalized strings (such as domain name labels, usernames, and passwords) in order to increase the likelihood that string input and string comparison work in ways that make sense for typical users around the world. The library contains a generic Stringprep implementation that does Unicode 3.2 NFKC normalization, mapping and prohibition of characters, and bidirectional character handling. Profiles for iSCSI, Kerberos 5, Nameprep, SASL, and XMPP are included. Punycode and ASCII Compatible Encoding (ACE) via IDNA is supported.
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883 1.1.0 119.15 x86_64
=Sum: Implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new &quot;rawiso&quot; API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883-32bit 1.1.0 119.15 x86_64
=Sum: Implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new &quot;rawiso&quot; API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libiec61883-devel 1.1.0 119.15 x86_64
=Sum: Implementation of IEC 61883
+Des:
<!-- DT:Rich -->
<p>This library is an implementation of IEC 61883, part 1 (CIP, plug registers,
and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 (AMDTP). Outside of
IIDC, nearly all FireWire multimedia devices use IEC 61883 protocols.
</p><p>
The libiec61883 library provides a higher level API for streaming DV,
MPEG-2 and audio over Linux IEEE 1394. This includes both reception and
transmission. It uses the new &quot;rawiso&quot; API of libraw1394, which transparently
provides mmap-ed DMA for efficient data transfer. It also represents
the third generation of I/O technology for Linux 1394 for these media types
thereby removing the complexities of additional kernel modules, /dev nodes,
and procfs. It also consolidates features for plug control registers and
connection management that previously existed in experimental form in an
unreleased version of libavc1394.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser-devel 2.17 87.17 x86_64
=Sum: Libraries and Header Files to Develop Programs with libiniparser Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to develop
programs which make use of the libiniparser programming interface.
</p><p>
The libiniparser offers parsing of ini files from the C level.  See a
complete documentation in HTML format, from the
/usr/share/doc/packages/libiniparser-devel directory open the file
html/index.html with any HTML-capable browser.
</p>
-Des:
##----------------------------------------
=Pkg: libipathverbs 1.1 92.12 x86_64
=Sum: PathScale InfiniPath HCA Userspace Driver
+Des:
<!-- DT:Rich -->
<p>libipathverbs provides a device-specific userspace driver for PathScale HCAs.
</p>
-Des:
##----------------------------------------
=Pkg: libipathverbs-32bit 1.1 92.12 x86_64
=Sum: PathScale InfiniPath HCA Userspace Driver
+Des:
<!-- DT:Rich -->
<p>libipathverbs provides a device-specific userspace driver for PathScale HCAs.
</p>
-Des:
##----------------------------------------
=Pkg: libipathverbs-devel 1.1 92.12 x86_64
=Sum: Development files for the libipathverbs driver
+Des:
<!-- DT:Rich -->
<p>Static version of libipathverbs that may be linked directly to an
application, which may be useful for debugging.
</p>
-Des:
##----------------------------------------
=Pkg: libipathverbs-devel-32bit 1.1 92.12 x86_64
=Sum: Development files for the libipathverbs driver
+Des:
<!-- DT:Rich -->
<p>Static version of libipathverbs that may be linked directly to an
application, which may be useful for debugging.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata 1.0.2 1.22 x86_64
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command line utility, iptc, for editing IPTC data in JPEG files.
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata-devel 1.0.2 1.22 x86_64
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command-line utility, iptc, for editing IPTC data in JPEG files.
</p><p>
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiptcdata0 1.0.2 1.22 x86_64
=Sum: IPTC Metadata Tag Manipulation Library
+Des:
<!-- DT:Rich -->
<p>libiptcdata is a library for parsing, editing, and saving IPTC data.
</p><p>
libiptcdata is a library for manipulating the International Press Telecommunications Council (IPTC) metadata stored within multimedia files such as images. This metadata can include captions and keywords, often used by popular photo management applications. The library provides routines for parsing, viewing, modifying, and saving this metadata. The libiptcdata package also includes a command line utility, iptc, for editing IPTC data in JPEG files.
The library implements the IPTC Information Interchange Model according to its specification.
</p>
-Des:
##----------------------------------------
=Pkg: libiso9660-5 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libiso9660-5-32bit 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libiterm-devel 0.5.20040304 259.27 x86_64
=Sum: Header files and development libraries for libiterm
+Des:
<!-- DT:Rich -->
<p>Header files and development libraries for libiterm
</p>
-Des:
##----------------------------------------
=Pkg: libjack-devel 0.109.2 65.16 x86_64
=Sum: Development package for jack
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that
communicates jack clients/servers.
</p>
-Des:
##----------------------------------------
=Pkg: libjack0 0.109.2 65.16 x86_64
=Sum: Jack Audio Connection Kit Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library to access JACK (Jack Audio Connection Kit).
</p>
-Des:
##----------------------------------------
=Pkg: libjack0-32bit 0.109.2 65.16 x86_64
=Sum: Jack Audio Connection Kit Library
+Des:
<!-- DT:Rich -->
<p>This package contains the library to access JACK (Jack Audio Connection Kit).
</p>
-Des:
##----------------------------------------
=Pkg: libjasper-devel 1.900.1 134.9 x86_64
=Sum: JPEG-2000 library - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>This package contains libjasper, a library implementing the JPEG-2000
image compression standard Part 1.
</p>
-Des:
##----------------------------------------
=Pkg: libjingle-0_3-0 0.3.11 7.14 x86_64
=Sum: Library for Peer-to-Peer Applications
+Des:
<!-- DT:Rich -->
<p>Libjingle is a collection of open-source C++ code and sample applications that enables you to build a peer-to-peer application.
</p>
-Des:
##----------------------------------------
=Pkg: libjingle-devel 0.3.11 7.14 x86_64
=Sum: Library for Peer-to-Peer Applications
+Des:
<!-- DT:Rich -->
<p>Libjingle is a collection of open-source C++ code and sample applications that enables you to build a peer-to-peer application.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg-devel-32bit 6.2.0 879.10 x86_64
=Sum: Development Tools for applications which will use the Libjpeg Library
+Des:
<!-- DT:Rich -->
<p>The libjpeg-devel package includes the header files and libraries
necessary for compiling and linking programs which will manipulate JPEG files using
the libjpeg library.
</p>
-Des:
##----------------------------------------
=Pkg: libjpeg-devel 6.2.0 879.10 x86_64
=Sum: Development Tools for applications which will use the Libjpeg Library
+Des:
<!-- DT:Rich -->
<p>The libjpeg-devel package includes the header files and libraries
necessary for compiling and linking programs which will manipulate JPEG files using
the libjpeg library.
</p>
-Des:
##----------------------------------------
=Pkg: libjson-glib-1_0-0 0.6.2 3.1.55 x86_64
=Sum: Library for JavaScript Object Notation format
+Des:
<!-- DT:Rich -->
<p>JSON is a lightweight data-interchange format.It is easy for humans to
read and write. It is easy for machines to parse and generate.
</p><p>
JSON-GLib provides a parser and a generator GObject classes and various
wrappers for the complex data types employed by JSON, such as arrays
and objects.
</p><p>
JSON-GLib uses GLib native data types and the generic value container
GValue for ease of development. It also provides integration with the
GObject classes for direct serialization into, and deserialization from,
JSON data streams.
</p>
-Des:
##----------------------------------------
=Pkg: libkcal 3.5.10 8.30 x86_64
=Sum: Calendaring Classes
+Des:
<!-- DT:Rich -->
<p>This library contains the calendaring classes originally only used by KOrganizer. They provide a C++ API for handling the vCalendar and iCalendar formats, which makes use of Qt classes. This library should be GUI independent and suitable for writing command line applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkcal-devel 3.5.10 8.30 x86_64
=Sum: Calendering Classes
+Des:
<!-- DT:Rich -->
<p>This library contains the calendaring classes originally only used by KOrganizer. They provide a C++ API for handling the vCalendar and iCalendar formats, which makes use of Qt classes. This library should be GUI independent and suitable for writing command line applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkcal2 3.5.10 8.30 x86_64
=Sum: Calendaring Classes
+Des:
<!-- DT:Rich -->
<p>This library contains the calendaring classes originally only used by KOrganizer. They provide a C++ API for handling the vCalendar and iCalendar formats, which makes use of Qt classes. This library should be GUI independent and suitable for writing command line applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkcddb4 4.3.5 0.2.28 x86_64
=Sum: KDE CDDB Library
+Des:
<!-- DT:Rich -->
<p>A library for retrieving and sending cddb information
</p>
-Des:
##----------------------------------------
=Pkg: libkcddb4-devel 4.3.5 0.2.28 x86_64
=Sum: KDE CDDB Library: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package includes the development headers for libkcddb.
</p>
-Des:
##----------------------------------------
=Pkg: libkcompactdisc4 4.3.5 0.2.28 x86_64
=Sum: KDE CD Library
+Des:
<!-- DT:Rich -->
<p>libworkman is a multi-plaform CD-Player library for creating various CD-Player-UIs.
</p>
-Des:
##----------------------------------------
=Pkg: libkcompactdisc4-devel 4.3.5 0.2.28 x86_64
=Sum: KDE CD Library: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers for the libkcompactdisc.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw3 0.1.4 50.26 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw3-devel 0.1.4 50.26 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw3-lang 0.1.4 50.26 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkdcraw7 4.3.5 0.1.74 x86_64
=Sum: Shared library interface around dcraw
+Des:
<!-- DT:Rich -->
<p>Libkdcraw is a C++ interface around dcraw binary program used to decode RAW
picture files.  The library documentation is available on header files.
</p><p>
This library is used by kipi-plugins, digiKam and others kipi host programs.
</p>
-Des:
##----------------------------------------
=Pkg: libkde4-32bit 4.3.5 0.2.46 x86_64
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base de l&#39;environnement K Desktop. Il contient les bibliothèques nécessaires pour le bureau KDE.
</p><p>
Ce paquet est absolument indispensable pour utiliser les applications graphiques KDE.
</p>
-Des:
##----------------------------------------
=Pkg: libkde4-devel 4.3.5 0.2.46 x86_64
=Sum: KDE Base Libraries: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdecore4-32bit 4.3.5 0.2.46 x86_64
=Sum: KDE Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the core libraries of the K Desktop Environment.
</p><p>
This package is absolutely necessary for using KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdecore4-devel 4.3.5 0.2.46 x86_64
=Sum: KDE Core Libraries: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop non-graphical KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdeedu4 4.3.5 0.2.44 x86_64
=Sum: Library for KDE Education Applications
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE education library.
</p>
-Des:
##----------------------------------------
=Pkg: libkdeedu4-devel 4.3.5 0.2.44 x86_64
=Sum: Library for KDE Education Applications: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary files and libraries needed to develop KDE education applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkdegames4 4.3.5 0.1.61 x86_64
=Sum: Library for KDE Games
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE games library.
</p>
-Des:
##----------------------------------------
=Pkg: libkdegames4-devel 4.3.5 0.1.61 x86_64
=Sum: Library for KDE Games: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary files and libraries needed to develop KDE games.
</p>
-Des:
##----------------------------------------
=Pkg: libkdepim4-devel 4.3.5 0.1.67 x86_64
=Sum: Bibliothèques du gestionnaire de données personnelles de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets essentiels pour les applications de gestion de données personnelles de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: libkdepimlibs4-devel 4.3.5 0.1.68 x86_64
=Sum: KDE PIM Libraries: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop KDE PIM applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-3 0.1.7 49.26 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-3-devel 0.1.7 49.26 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-7 4.3.5 0.1.74 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkexiv2-devel 4.3.5 0.1.74 x86_64
=Sum: Library to manipulate picture meta data
+Des:
<!-- DT:Rich -->
<p>Libkexiv2 is a wrapper around Exiv2 library to manipulate pictures metadata.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi-devel 4.3.5 0.1.74 x86_64
=Sum: KDE Image Plugin Interface
+Des:
<!-- DT:Rich -->
<p>This package provides a generic KDE Image Plug-in Interface used by some KDE image applications. Plug-ins for this interface are in the kipi-plugins package.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi0 0.1.6 1.32 x86_64
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>This package provides a generic KDE image plug-in interface used by some KDE image applications. Plug-ins for this interface are in the kipi-plugins package.
</p>
-Des:
##----------------------------------------
=Pkg: libkipi0-lang 0.1.6 1.32 x86_64
=Sum: KDE Image Plug-In Interface
+Des:
<!-- DT:Rich -->
<p>This package provides a generic KDE image plug-in interface used by some KDE image applications. Plug-ins for this interface are in the kipi-plugins package.
</p>
-Des:
##----------------------------------------
=Pkg: libkmime-devel 3.5.10 8.30 x86_64
=Sum: Library to read MIME messages
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read MIME messages.
</p>
-Des:
##----------------------------------------
=Pkg: libkmime2 3.5.10 8.30 x86_64
=Sum: Library to read MIME messages
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read MIME messages.
</p>
-Des:
##----------------------------------------
=Pkg: libknotificationitem-devel 4.3.5 0.1.64 x86_64
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base de l&#39;environnement K Desktop. Il contient les bibliothèques nécessaires pour le bureau KDE.
</p><p>
Ce paquet est absolument indispensable pour utiliser les applications graphiques KDE.
</p>
-Des:
##----------------------------------------
=Pkg: libkonq-devel 4.3.5 0.1.74 x86_64
=Sum: KDE Konqueror Libraries: Build Environment
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop KDE file manager applications.
</p>
-Des:
##----------------------------------------
=Pkg: libkonq5-32bit 4.3.5 0.1.74 x86_64
=Sum: Bibliothèques pour Konqueror
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries used by file managers as Konqueror.
</p>
-Des:
##----------------------------------------
=Pkg: libksane0 4.3.5 0.1.74 x86_64
=Sum: KDE scan library
+Des:
<!-- DT:Rich -->
<p>This package contains a library to add scan support to KDE applications.
</p>
-Des:
##----------------------------------------
=Pkg: libksba-devel 1.0.4 1.16 x86_64
=Sum: A X.509 Library
+Des:
<!-- DT:Rich -->
<p>KSBA is a library to simplify the task of working with X.509
certificates, CMS data, and related data.
</p><p>
This package contains the needed files to compile and link against the libksba.
</p>
-Des:
##----------------------------------------
=Pkg: libktnef-devel 3.5.10 8.30 x86_64
=Sum: Library to read TNEF
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read the TNEF format.
</p>
-Des:
##----------------------------------------
=Pkg: libktnef1 3.5.10 8.30 x86_64
=Sum: Library to read TNEF
+Des:
<!-- DT:Rich -->
<p>This package contains a library to read the TNEF format.
</p>
-Des:
##----------------------------------------
=Pkg: liblazy-devel 0.2 35.16 x86_64
=Sum: Liblazy - D-Bus methods provided for convenience
+Des:
<!-- DT:Rich -->
<p>Liblazy is a simple and easy to use library that provides convenient functions for sending messages over the D-Bus daemon, querying information from HAL or asking PolicyKit for a privilege.
</p>
-Des:
##----------------------------------------
=Pkg: liblazy1-32bit 0.2 35.16 x86_64
=Sum: Liblazy - D-Bus methods provided for convenience
+Des:
<!-- DT:Rich -->
<p>Liblazy is a simple and easy to use library that provides convenient functions for sending messages over the D-Bus daemon, querying information from HAL or asking PolicyKit for a privilege.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms-devel 1.17 77.14.19 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: liblcms-devel-32bit 1.17 77.14.19 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libldapcpp-devel 0.1.2 3.1.42 x86_64
=Sum: Files for Developing libldapcpp Applications
+Des:
<!-- DT:Rich -->
<p>This package contains files needed for development with the LDAP C++ library.
</p>
-Des:
##----------------------------------------
=Pkg: liblog4c-devel 1.2.1 10.34 x86_64
=Sum: Development files for log4c
+Des:
<!-- DT:Rich -->
<p>The liblog4c-devel package contains the static libraries and header files
needed for development with log4c.
</p>
-Des:
##----------------------------------------
=Pkg: liblog4c3-32bit 1.2.1 10.34 x86_64
=Sum: A library of C for flexible logging to files, syslog and other destinations
+Des:
<!-- DT:Rich -->
<p>Log4c is a library of C for flexible logging to files, syslog and other
destinations. It is modeled after the Log for Java library
(http://jakarta.apache.org/log4j/), staying as close to their API as is
reasonable.
</p>
-Des:
##----------------------------------------
=Pkg: libloudmouth-1-0 1.4.2 3.20 x86_64
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It is designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: liblpsolve55 5.5.0.13 2.22 x86_64
=Sum: A Mixed Integer Linear Programming (MILP) Solver Library
+Des:
<!-- DT:Rich -->
<p>Mixed Integer Linear Programming (MILP) solver library lpsolve solves pure linear, (mixed) integer/binary, semi-continuous and special ordered sets (SOS) models.
</p>
-Des:
##----------------------------------------
=Pkg: liblzmadec0 4.32.7 1.25 x86_64
=Sum: LZMA decoder library
+Des:
<!-- DT:Rich -->
<p>Decoding library for LZMA
</p>
-Des:
##----------------------------------------
=Pkg: libmal 0.31 176.15 x86_64
=Sum: Palm Sync Library
+Des:
<!-- DT:Rich -->
<p>Libmal is a convenience library of the object files contained in
Tom Whittaker&#39;s malsync distribution. It also includes a few wrapper functions.
</p>
-Des:
##----------------------------------------
=Pkg: libmal-devel 0.31 176.15 x86_64
=Sum: Palm Sync Library
+Des:
<!-- DT:Rich -->
<p>libmal is a convenient library made up of the object files contained in
Tom Whittaker&#39;s malsync distribution. libmaal also contains a few wrapper functions.
</p>
-Des:
##----------------------------------------
=Pkg: libmal1 0.44 2.15 x86_64
=Sum: Palm Sync Library
+Des:
<!-- DT:Rich -->
<p>Libmal is a convenience library of the object files contained in
Tom Whittaker&#39;s malsync distribution. It also includes a few wrapper functions.
</p>
-Des:
##----------------------------------------
=Pkg: libmal1-devel 0.44 2.15 x86_64
=Sum: Palm Sync Library
+Des:
<!-- DT:Rich -->
<p>libmal is a convenient library made up of the object files contained in
Tom Whittaker&#39;s malsync distribution. libmaal also contains a few wrapper functions.
</p>
-Des:
##----------------------------------------
=Pkg: libmalaga-devel 7.12 2.16 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libmalaga7 7.12 2.16 x86_64
=Sum: A Grammar Development Environment for Natural Languages
+Des:
<!-- DT:Rich -->
<p>Malaga is a software package for the development and application of grammars that are used for the analysis of words and sentences
of natural languages. It contains a programming language for the
modelling of morphology and syntax grammars.
</p><p>
Malaga is based on the grammatical theory of the &quot;Left Associative Grammar&quot;
(LAG), developed by Roland Hausser, professor for Computational Linguistics at
University of Erlangen, Germany.
</p>
-Des:
##----------------------------------------
=Pkg: libmcrypt-devel 2.5.8 43.21 x86_64
=Sum: Development Package for Libmcrypt
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using libmcrypt.
</p>
-Des:
##----------------------------------------
=Pkg: libmemcache 1.4.0.rc2 97.21 x86_64
=Sum: A client library for memcached
+Des:
<!-- DT:Rich -->
<p>libmemcache implements a client for the superior memcached from Danga Interactive.
</p>
-Des:
##----------------------------------------
=Pkg: libmemcache-devel 1.4.0.rc2 97.21 x86_64
=Sum: Development files for libmemcache
+Des:
<!-- DT:Rich -->
<p>libmemcache implements a client for the superior memcached from Danga Interactive.
</p><p>
This package contains the development files for libmemcache.
</p>
-Des:
##----------------------------------------
=Pkg: libmikmod 3.1.11a 116.2.1 x86_64
=Sum: MikMod Sound Library
+Des:
<!-- DT:Rich -->
<p>Libmikmod is a portable sound library, capable of playing samples
as well as module files. It was originally written by Jean-Paul Mikkers
(MikMak) for DOS. It supports OSS /dev/dsp, ALSA, and Esound and can
also write wav files. Supported file formats include mod, stm,
s3m, mtm, xm, and it.
</p>
-Des:
##----------------------------------------
=Pkg: libmikmod-devel 3.1.11a 116.2.1 x86_64
=Sum: Development files for MikMod Sound Library
+Des:
<!-- DT:Rich -->
<p>This package contains files needed for compiling programs using <a href="pkg://libmikmod">libmikmod</a>.
</p><p>
Libmikmod is a portable sound library, capable of playing samples
as well as module files. It was originally written by Jean-Paul Mikkers
(MikMak) for DOS. It supports OSS /dev/dsp, ALSA, and Esound and can
also write wav files. Supported file formats include mod, stm,
s3m, mtm, xm, and it.
</p>
-Des:
##----------------------------------------
=Pkg: libmlx4-rdmav2 1.0 5.17.19 x86_64
=Sum: Mellanox InfiniBand HCA Userspace Driver
+Des:
<!-- DT:Rich -->
<p>libmlx4 provides a device-specific userspace driver for Mellanox
ConnectX HCAs for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libmlx4-rdmav2-32bit 1.0 5.17.19 x86_64
=Sum: Mellanox InfiniBand HCA Userspace Driver
+Des:
<!-- DT:Rich -->
<p>libmlx4 provides a device-specific userspace driver for Mellanox
ConnectX HCAs for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libmlx4-rdmav2-devel 1.0 5.17.19 x86_64
=Sum: Development files for the libmlx4 library
+Des:
<!-- DT:Rich -->
<p>Development files for the libmlx4 library.
</p>
-Des:
##----------------------------------------
=Pkg: libmlx4-rdmav2-devel-32bit 1.0 5.17.19 x86_64
=Sum: Development files for the libmlx4 library
+Des:
<!-- DT:Rich -->
<p>Development files for the libmlx4 library.
</p>
-Des:
##----------------------------------------
=Pkg: libmm-devel 1.4.2 16.22 x86_64
=Sum: Static Libraries and Includes for mm
+Des:
<!-- DT:Rich -->
<p>Static Libraries and Includes for mm
</p>
-Des:
##----------------------------------------
=Pkg: libmm14 1.4.2 16.22 x86_64
=Sum: Shared Memory Library
+Des:
<!-- DT:Rich -->
<p>The MM library is a 2-layer abstraction library that simplifies the
usage of shared memory between forked (and this way strongly related)
processes under Unix platforms. On the first layer, it hides all
platform-dependent implementation details (allocation and locking)
when dealing with shared memory segments and on the second layer it
provides a high-level malloc(3)-style API for a convenient and
well-known way to work with data structures inside those shared memory
segments.
</p>
-Des:
##----------------------------------------
=Pkg: libmng-devel 1.0.10 46.18 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats which contain animated pictures.
These formats should replace the GIF format.
</p><p>
This package contains the static library and the header files.
</p>
-Des:
##----------------------------------------
=Pkg: libmpc2 0.8 0.1.49 x86_64
=Sum: MPC multiple-precision complex shared library
+Des:
<!-- DT:Rich -->
<p>MPC is a C library for the arithmetic of complex numbers with arbitrarily
high precision and correct rounding of the result. It is built upon and
follows the same principles as MPFR.
</p>
-Des:
##----------------------------------------
=Pkg: libmpcdec-devel 1.2.6 4.22 x86_64
=Sum: Musepack Audio Decoder
+Des:
<!-- DT:Rich -->
<p>Musepack is an audio compression format with a strong emphasis on high quality. It&#39;s not lossless, but it is designed for transparency, so that you won&#39;t be able to hear differences between the original wave file and the much smaller MPC file.
</p><p>
It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code.
</p><p>
Musepack is not particularly optimized for low bitrates. The encoder was designed to be transparent at the --standard setting, thus little low bitrate tuning has gone into the codec, opposite to that of AAC, Vorbis, WMA and others which focus more on this region.
</p>
-Des:
##----------------------------------------
=Pkg: libmpfr1-32bit 2.3.2 3.115 x86_64
=Sum: MPFR multiple-precision floating-point computation shared library
+Des:
<!-- DT:Rich -->
<p>The MPFR library is a C library for multiple-precision floating-point computations with exact rounding (also called correct rounding). It is based on the GMP multiple-precision library.
</p>
-Des:
##----------------------------------------
=Pkg: libmsn-devel 3.9.97 1.1.74 x86_64
=Sum: Reusable, open-source library for MSN Messenger
+Des:
<!-- DT:Rich -->
<p>Libmsn is a reusable, open-source, fully documented library for connecting to Microsoft&#39;s MSN Messenger service.
</p>
-Des:
##----------------------------------------
=Pkg: libmspack-devel 0.0.20060920alpha 66.8 x86_64
=Sum: Static libraries, header files and documentation for libmspack
+Des:
<!-- DT:Rich -->
<p>The libmspack-devel package contains the header files and static libraries
necessary for developing programs using libmspack.
</p>
-Des:
##----------------------------------------
=Pkg: libmthca-rdmav2 1.0.5 5.15 x86_64
=Sum: User space libraries (device-specific) for Infiniband Mellanox HCA
+Des:
<!-- DT:Rich -->
<p>libmthca provides a device-specific userspace driver for Mellanox HCAs
(MT23108 InfiniHost and MT25208 InfiniHost III Ex) for use with the
libibverbs library
</p>
-Des:
##----------------------------------------
=Pkg: libmthca-rdmav2-32bit 1.0.5 5.15 x86_64
=Sum: User space libraries (device-specific) for Infiniband Mellanox HCA
+Des:
<!-- DT:Rich -->
<p>libmthca provides a device-specific userspace driver for Mellanox HCAs
(MT23108 InfiniHost and MT25208 InfiniHost III Ex) for use with the
libibverbs library
</p>
-Des:
##----------------------------------------
=Pkg: libmthca-rdmav2-devel 1.0.5 5.15 x86_64
=Sum: Development files for the libmthca driver
+Des:
<!-- DT:Rich -->
<p>Static version of libmthca that may be linked directly to an
application, which may be useful for debugging.
</p>
-Des:
##----------------------------------------
=Pkg: libmthca-rdmav2-devel-32bit 1.0.5 5.15 x86_64
=Sum: Development files for the libmthca driver
+Des:
<!-- DT:Rich -->
<p>Static version of libmthca that may be linked directly to an
application, which may be useful for debugging.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp-devel 0.3.4 2.19 x86_64
=Sum: Development files for access to MTP Player library
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers for the libmtp library
that allows access to USB based media players based on the MTP (Media Transfer
Protocol) authored by Microsoft.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp8 0.3.4 2.19 x86_64
=Sum: Library for accessing MTP Players
+Des:
<!-- DT:Rich -->
<p>This package contain the libraries that allow access to USB based media players based on the MTP (Media TransferProtocol) authored by Microsoft.
</p><p>
Common devices using this technology are Creative Zen, iRiver, Samsung and others.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz-devel 2.1.5 5.18 x86_64
=Sum: Inclu les fichiers et les bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz3-6 3.0.2 1.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index. This
server is designed to enable audio CD, MP3 and Vorbis players to
download metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz3-devel 3.0.2 1.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index. This
server is designed to enable audio CD, MP3 and Vorbis players to
download metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libmxml1 2.5 23.22 x86_64
=Sum: Shared libary for mxml
+Des:
<!-- DT:Rich -->
<p>Mini-XML is a small XML parsing library that you can use to
read XML and XML-like data files in your application without
requiring large nonstandard libraries.
</p><p>
This package holds the shared libary for mxml.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient-devel 5.0.67 13.20.1 x86_64
=Sum: MySQL Development Header Files and Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the development header files and libraries necessary
to develop MySQL client applications.
</p>
-Des:
##----------------------------------------
=Pkg: libmysqlclient_r15-32bit 5.0.67 13.20.1 x86_64
=Sum: A True Multiuser, Multithreaded SQL Database Server
##----------------------------------------
=Pkg: libneon-devel 0.28.3 2.12.1 x86_64
=Sum: An HTTP and WebDAV Client Library
+Des:
<!-- DT:Rich -->
<p>neon is an HTTP and WebDAV client library with a C interface. Featuring:
neon is an HTTP and WebDAV client library with a C interface. Featuring:<ul>
<li>High-level interface to HTTP and WebDAV methods (PUT, GET, HEAD, etc.)
</li><li>Low-level interface to HTTP request handling to allow implementing
new methods easily
</li><li>HTTP/1.1 and HTTP/1.0 persistent connections
</li><li>RFC2617 basic and digest authentication (including auth-int, md5-sess)
</li><li>Proxy support (including basic/digest authentication)
</li><li>Generic WebDAV 207 XML response handling mechanism
</li><li>XML parsing using the expat or libxml parsers
</li><li>Easy generation of error messages from 207 error responses
</li><li>WebDAV resource manipulation: MOVE, COPY, DELETE, MKCOL
</li><li>WebDAV metadata support: set and remove properties, query any set of
properties (PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libneon27-32bit 0.28.3 2.12.1 x86_64
=Sum: An HTTP and WebDAV Client Library
+Des:
<!-- DT:Rich -->
<p>neon is an HTTP and WebDAV client library with a C interface. Featuring:
neon is an HTTP and WebDAV client library with a C interface. Featuring:<ul>
<li>High-level interface to HTTP and WebDAV methods (PUT, GET, HEAD, etc.)
</li><li>Low-level interface to HTTP request handling to allow implementing
new methods easily
</li><li>HTTP/1.1 and HTTP/1.0 persistent connections
</li><li>RFC2617 basic and digest authentication (including auth-int, md5-sess)
</li><li>Proxy support (including basic/digest authentication)
</li><li>Generic WebDAV 207 XML response handling mechanism
</li><li>XML parsing using the expat or libxml parsers
</li><li>Easy generation of error messages from 207 error responses
</li><li>WebDAV resource manipulation: MOVE, COPY, DELETE, MKCOL
</li><li>WebDAV metadata support: set and remove properties, query any set of
properties (PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libnes-rdmav2 0.6 0.1.42 x86_64
=Sum: NetEffect RNIC Userspace Library
+Des:
<!-- DT:Rich -->
<p>libnes provides a device-specific userspace driver for NetEffect RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libnes-rdmav2-devel 0.6 0.1.42 x86_64
=Sum: NetEffect RNIC Userspace Library
+Des:
<!-- DT:Rich -->
<p>libnes provides a device-specific userspace driver for NetEffect RNICs
for use with the libibverbs library.
</p>
-Des:
##----------------------------------------
=Pkg: libnetapi-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with netapi Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of the netapi programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libnetapi0 3.4.3 1.17.2 x86_64
=Sum: Samba netapi Library
+Des:
<!-- DT:Rich -->
<p>This package includes the netapi library.
</p>
-Des:
##----------------------------------------
=Pkg: libnetlink-devel 2.6.29.1 6.1.82 x86_64
=Sum: A Higher Level Interface to the Netlink Service
+Des:
<!-- DT:Rich -->
<p>libnetlink provides a higher level interface to rtnetlink(7).
</p>
-Des:
##----------------------------------------
=Pkg: libnetpbm-devel 10.26.44 101.9.1 x86_64
=Sum: Libraries for the NetPBM Graphic Formats - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>These are the libs for the netpbm graphic formats. The tools can be found
in the netpbm package.
The sources are contained in the netpbm source package.
</p>
-Des:
##----------------------------------------
=Pkg: libnetpbm-devel-32bit 10.26.44 101.9.1 x86_64
=Sum: Libraries for the NetPBM Graphic Formats - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>These are the libs for the netpbm graphic formats. The tools can be found
in the netpbm package.
The sources are contained in the netpbm source package.
</p>
-Des:
##----------------------------------------
=Pkg: libnewt0_52 0.52.10 1.32.1 x86_64
=Sum: Shared libraries for Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>This package contains the shared libraries needed by programs built with newt.
</p><p>
Newt is a programming library for color text-mode widget-based user interfaces.  Newt can be used to add stacked windows, entry widgets, check boxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: libnice-devel 0.0.9 1.1.181 x86_64
=Sum: Interactive Connectivity Establishment implementation - development files
+Des:
<!-- DT:Rich -->
<p>libnice is an implementation of the IETF&#39;s draft Interactive Connectivity Establishment standard (ICE).
</p>
-Des:
##----------------------------------------
=Pkg: libnice0 0.0.9 1.1.181 x86_64
=Sum: Interactive Connectivity Establishment implementation
+Des:
<!-- DT:Rich -->
<p>libnice is an implementation of the IETF&#39;s draft Interactive Connectivity Establishment standard (ICE).
</p>
-Des:
##----------------------------------------
=Pkg: libnjb 2.2.6 26.24 x86_64
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnjb-devel 2.2.6 26.24 x86_64
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnjb5 2.2.6 26.24 x86_64
=Sum: Nomad Jukebox API
+Des:
<!-- DT:Rich -->
<p>Nomad Jukebox API
</p>
-Des:
##----------------------------------------
=Pkg: libnl-devel 1.1 49.18 x86_64
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify-devel 0.4.4 173.27.1 x86_64
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify1-32bit 0.4.4 173.27.1 x86_64
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd-devel 2.0.2 73.18 x86_64
=Sum: Include Files and Libraries for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that needs to communicate with a running nscd.
</p>
-Des:
##----------------------------------------
=Pkg: libnuma-devel 2.0.3 0.4.3 x86_64
=Sum: NUMA Policy Control
+Des:
<!-- DT:Rich -->
<p>Control NUMA policy for individual processes.
Offer libnuma for individual NUMA policy in applications.
</p>
-Des:
##----------------------------------------
=Pkg: libnuma1 2.0.3 0.4.3 x86_64
=Sum: NUMA Policy Control
+Des:
<!-- DT:Rich -->
<p>Control NUMA policy for individual processes.
Offer libnuma for individual NUMA policy in applications.
</p>
-Des:
##----------------------------------------
=Pkg: libobjc43-32bit 4.3.4_20091019 0.7.35 x86_64
=Sum: Library for the GNU Objective C Compiler
+Des:
<!-- DT:Rich -->
<p>The library for the GNU Objective C compiler.
</p>
-Des:
##----------------------------------------
=Pkg: libobjc43 4.3.4_20091019 0.7.35 x86_64
=Sum: Library for the GNU Objective C Compiler
+Des:
<!-- DT:Rich -->
<p>The library for the GNU Objective C compiler.
</p>
-Des:
##----------------------------------------
=Pkg: libofa-devel 0.9.3 73.18 x86_64
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libofa0 0.9.3 73.18 x86_64
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libofx 0.9.0 1.26 x86_64
=Sum: OFX Command Parser and API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, &quot;To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it.&quot;
</p>
-Des:
##----------------------------------------
=Pkg: libofx-devel 0.9.0 1.26 x86_64
=Sum: OFX Command Parser and API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, &quot;To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it.&quot;
</p>
-Des:
##----------------------------------------
=Pkg: libofx4 0.9.0 1.26 x86_64
=Sum: OFX Command Parser and API
+Des:
<!-- DT:Rich -->
<p>LibOFX is a parser and API designed to allow applications to support OFX command responses, usually provided by financial institutions for statement downloads. The author says, &quot;To my knowledge, it is the first working OpenSource implementations of the OFX (Open Financial eXchange) specification on the client side. This project was first started as my end of degree project, with the goal of adding OFX support to GnuCash. It has since evolved into a generic library, so all OpenSource Financial software can benefit from it.&quot;
</p>
-Des:
##----------------------------------------
=Pkg: libogg-devel 1.1.3 87.12 x86_64
=Sum: Include Files and Libraries mandatory for Ogg Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and develop applications that use <a href="pkg://libogg">libogg</a>.
</p>
-Des:
##----------------------------------------
=Pkg: liboil-devel 0.3.15 3.10 x86_64
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects, and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: libopenbabel-devel 2.2.0 4.21 x86_64
=Sum: Open Babel - The Open Source Chemistry Toolbox
+Des:
<!-- DT:Rich -->
<p>Open Babel is a chemical toolbox designed to speak the many languages of chemical data. It&#39;s an open, collaborative project allowing anyone to search, convert, analyze, or store data from molecular modeling, chemistry, solid-state materials, biochemistry, or related areas.
</p>
-Des:
##----------------------------------------
=Pkg: libopenbabel3 2.2.0 4.21 x86_64
=Sum: Open Babel - The Open Source Chemistry Toolbox
+Des:
<!-- DT:Rich -->
<p>Open Babel is a chemical toolbox designed to speak the many languages of chemical data. It&#39;s an open, collaborative project allowing anyone to search, convert, analyze, or store data from molecular modeling, chemistry, solid-state materials, biochemistry, or related areas.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk-devel 0.6.6 2.16 x86_64
=Sum: Development tools for programs which will use the opencdk library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will be linked against the opencdk library.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk-devel-32bit 0.6.6 2.16 x86_64
=Sum: Development tools for programs which will use the opencdk library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will be linked against the opencdk library.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk10 0.6.6 2.16 x86_64
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: libopencdk10-32bit 0.6.6 2.16 x86_64
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: libopenraw-devel 0.0.5 6.28 x86_64
=Sum: A library to decode digtal camera RAW files
+Des:
<!-- DT:Rich -->
<p>libopenraw is a library that aim at decoding digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: libopenraw1 0.0.5 6.28 x86_64
=Sum: A library to decode digtal camera RAW files
+Des:
<!-- DT:Rich -->
<p>libopenraw is a library that aim at decoding digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: libopenssl-devel 0.9.8h 30.27.11 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync 0.22 150.21 x86_64
=Sum: A Platform and Distribution Independent Synchronization Framework
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
It consists of several plug-ins that can be used to connect to devices, a powerful sync engine, and the framework itself.
The synchronization framework is kept very flexible and is capable of synchronizing any type of data, including contacts, calendar, tasks, notes, and files.
</p><p>
To sync various sources, additionally install the plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-devel 0.22 150.21 x86_64
=Sum: Header files, libraries and development documentation for libopensync
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and development
documentation for libopensync. If you like to develop programs using libopensync, you will need to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-evolution2 0.22 132.34 x86_64
=Sum: Evolution 2 Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from
Evolution 2.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-evolution2-devel 0.22 132.34 x86_64
=Sum: Header files and libraries for libopensync-plugin-evolution2
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and development
documentation for libopensync-plugin-evolution2. If you like to develop
programs using libopensync-plugin-evolution2, you will need to install
libopensync-plugin-evolution2-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-palm 0.22 44.17 x86_64
=Sum: Palm Synchronization Plug-In for OpenSync
+Des:
<!-- DT:Rich -->
<p>This plug-in allows applications using OpenSync to synchronize to and from Palm devices.
</p><p>
Additionally install the libopensync package.
</p>
-Des:
##----------------------------------------
=Pkg: libopensync-plugin-palm-devel 0.22 44.17 x86_64
=Sum: Header files and libraries for libopensync-plugin-palm
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and
development documentation for libopensync-plugin-palm. If you
like to develop programs using libopensync-plugin-palm, you will
need to install libopensync-plugin-palm-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libosip2 3.1.0 1.15 x86_64
=Sum: Implementation of SIP--RFC 3261
+Des:
<!-- DT:Rich -->
<p>This is the GNU oSIP library. It has been designed
to provide the Internet community with a simple way to
support the Session Initiation Protocol. SIP is
described in the RFC 3261, which is available at
http://www.ietf.org/rfc/rfc3261.txt.
</p>
-Des:
##----------------------------------------
=Pkg: libosip2-devel 3.1.0 1.15 x86_64
=Sum: Implementation of SIP--RFC 3261
+Des:
<!-- DT:Rich -->
<p>This is the GNU oSIP library. It has been designed
to provide the Internet community with a simple way to
support the Session Initiation Protocol. SIP is
described in the RFC 3261, which is available at
http://www.ietf.org/rfc/rfc3261.txt.
</p>
-Des:
##----------------------------------------
=Pkg: libotf-32bit 0.9.7 2.17 x86_64
=Sum: Library for Handling OpenType Fonts
+Des:
<!-- DT:Rich -->
<p>Library for handling OpenType fonts.
</p>
-Des:
##----------------------------------------
=Pkg: libotf-devel 0.9.7 2.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libotf-devel-32bit 0.9.7 2.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libotr-devel 3.2.0 1.16 x86_64
=Sum: Include files and development libraries
+Des:
<!-- DT:Rich -->
<p>Headers and development libraries for libotr
</p>
-Des:
##----------------------------------------
=Pkg: libp11-devel 0.2.4 3.14 x86_64
=Sum: Library Implementing a Small Layer on Top of PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>Libp11 is a library implementing a small layer on top of PKCS#11 API to make using PKCS#11 implementations easier.
</p><p>
The official name for PKCS#11 is &quot;RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p><p>
Libp11 source code include the official header files (version 2.20) and thus is &quot;derived from the RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libpackagekit-glib10-devel 0.3.14 2.12.105 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: libpackagekit-qt10 0.3.14 2.12.105 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: libpackagekit-qt10-devel 0.3.14 2.12.105 x86_64
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: libpapi 3.7.2 0.8.24 x86_64
=Sum: Performance Application Programming Interface
+Des:
<!-- DT:Rich -->
<p>PAPI aims to provide the tool designer and application engineer with a consistent interface and methodology for use of the performance counter hardware found in most major microprocessors. PAPI enables software engineers to see, in near real time, the relation between software performance and processor events.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap-devel 0.9.8 50.4.80 x86_64
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>libpcap is a library used by packet sniffer programs. It provides an
interface for them to capture and analyze packets from network devices.
This package is only needed if you plan to compile or write such a
program yourself.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap0-32bit 0.9.8 50.4.80 x86_64
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>libpcap is a library used by packet sniffer programs. It provides an
interface for them to capture and analyze packets from network devices.
This package is only needed if you plan to compile or write such a
program yourself.
</p>
-Des:
##----------------------------------------
=Pkg: libpciaccess0-devel 7.4 8.24.2 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libphonon4-32bit 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: libpisock-devel 0.12.3 2.26 x86_64
=Sum: PalmPilot Development Header Files
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers of libpisock.
</p>
-Des:
##----------------------------------------
=Pkg: libpisock9 0.12.3 2.26 x86_64
=Sum: Pilot-Link Library for Palm devices
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
If you want to develop Palm synchronization applications, you
will need to install libpisock-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libpisync-devel 0.12.3 2.26 x86_64
=Sum: Pilot-Link based Synchronization Library for Palm devices
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
If you want to develop Palm synchronization applications, you
will need to install libpisock-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libpisync1 0.12.3 2.26 x86_64
=Sum: Pilot-Link based Synchronization Library for Palm devices
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
If you want to develop Palm synchronization applications, you
will need to install libpisock-devel.
</p>
-Des:
##----------------------------------------
=Pkg: libpixman-1-0-devel 0.16.0 1.2.22 x86_64
=Sum: Pixel manipulation library - development files
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: libpng-devel 1.2.31 5.12.1 x86_64
=Sum: Development Tools for applications which will use the Libpng
+Des:
<!-- DT:Rich -->
<p>The libpng-devel package includes the header files, libraries, configuration files and development tools necessary for compiling and linking programs which will manipulate PNG files using libpng.
</p><p>
libpng is the official reference library for the Portable Network Graphics (PNG) format.
</p>
-Des:
##----------------------------------------
=Pkg: libpng-devel-32bit 1.2.31 5.12.1 x86_64
=Sum: Development Tools for applications which will use the Libpng
+Des:
<!-- DT:Rich -->
<p>The libpng-devel package includes the header files, libraries, configuration files and development tools necessary for compiling and linking programs which will manipulate PNG files using libpng.
</p><p>
libpng is the official reference library for the Portable Network Graphics (PNG) format.
</p>
-Des:
##----------------------------------------
=Pkg: libpolkit-qt-devel 0.9.2 3.1.92 x86_64
=Sum: PolicyKit Library Qt Bindings
+Des:
<!-- DT:Rich -->
<p>Polkit-qt aims to make it easy for Qt developers to take advantage of PolicyKit API. It is a convenience wrapper around QAction and QAbstractButton that lets you integrate those two components easily with PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-devel 0.12.3 1.2.44 x86_64
=Sum: PDF rendering library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new version of these xpdf based viewers.  It&#39;s safe to say that
there&#39;s a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn&#39;t fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs a wide range of X based platforms.  This
is a strong feature and reasonable design goal.  However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-glib-devel 0.12.3 1.2.44 x86_64
=Sum: PDF rendering library - GLib Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new version of these xpdf based viewers.  It&#39;s safe to say that
there&#39;s a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn&#39;t fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs a wide range of X based platforms.  This
is a strong feature and reasonable design goal.  However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-qt2 0.12.3 1.2.44 x86_64
=Sum: PDF Rendering Library - Qt3 Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-qt3-devel 0.12.3 1.2.44 x86_64
=Sum: PDF rendering library - Qt3 Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new version of these xpdf based viewers.  It&#39;s safe to say that
there&#39;s a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn&#39;t fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs a wide range of X based platforms.  This
is a strong feature and reasonable design goal.  However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libpoppler-qt4-devel 0.12.3 1.2.44 x86_64
=Sum: PDF rendering library - Qt4 Wrapper
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, we want to provide PDF rendering functionality as a shared
library, to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base, and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new version of these xpdf based viewers.  It&#39;s safe to say that
there&#39;s a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf derived code
base to the world, we hope that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that doesn&#39;t fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs a wide range of X based platforms.  This
is a strong feature and reasonable design goal.  However, with poppler
we would like to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system, in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: libppl7 0.10.2 4.1.51 x86_64
=Sum: Shared library for the Parma Polyhedra Library
+Des:
<!-- DT:Rich -->
<p>Shared library for the Parma Polyhedra Library.
</p>
-Des:
##----------------------------------------
=Pkg: libppl_c2 0.10.2 4.1.51 x86_64
=Sum: Shared library for the Parma Polyhedra Library C bindings
+Des:
<!-- DT:Rich -->
<p>Shared library for the Parma Polyhedra Library C bindings.
</p>
-Des:
##----------------------------------------
=Pkg: libproxy-devel 0.3.1 1.1.42 x86_64
=Sum: libproxy is a library that provides automatic proxy configuration management - development files
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libpst-devel 0.6.44 1.1.43 x86_64
=Sum: A library for reading PST files (devel package)
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libpst0 0.6.17 2.17 x86_64
=Sum: Shared library for libpst
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libpst4 0.6.44 1.1.43 x86_64
=Sum: A library for reading PST files
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libpt2 2.4.2 2.33 x86_64
=Sum: Portable Windows Library from Equivalence Pty. Ltd. version 2
+Des:
<!-- DT:Rich -->
<p>This is a moderately large class library that was created many years ago
as a method to produce applications that run on both Microsoft Windows and the X Window System.
It is used for the opal project, see www.openh323.org for details.
</p>
-Des:
##----------------------------------------
=Pkg: libpt2-devel 2.4.2 2.33 x86_64
=Sum: Development files for libpt2 (includes headers and scripts)
+Des:
<!-- DT:Rich -->
<p>This package includes header files and scripts needed for developers
using the libpt2 library.
</p>
-Des:
##----------------------------------------
=Pkg: libpulse-devel 0.9.21 1.5.26 x86_64
=Sum: Development package for the pulseaudio library
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p><p>
This package contains the files needed to compile programs that use the
pulseaudio library.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple 2.6.6 0.6.47 x86_64
=Sum: Library for IM Clients Like Pidgin and Finch
+Des:
<!-- DT:Rich -->
<p>libpurple contains the core IM support for IM clients such as Pidgin
and Finch.
</p><p>
libpurple supports a variety of messaging protocols including AIM, MSN,
Yahoo!, Jabber, Bonjour, Gadu-Gadu, ICQ, IRC, Novell Groupwise, QQ,
Lotus Sametime, SILC, Simple and Zephyr.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple-devel 2.6.6 0.6.47 x86_64
=Sum: Development Headers, Documentation, and Libraries for libpurple
+Des:
<!-- DT:Rich -->
<p>The libpurple-devel package contains the header files, developer
documentation, and libraries required for development of libpurple based
instant messaging clients or plugins for any libpurple based client.
</p>
-Des:
##----------------------------------------
=Pkg: libpurple-lang 2.6.6 0.6.47 x86_64
=Sum: Library for IM Clients Like Pidgin and Finch
+Des:
<!-- DT:Rich -->
<p>libpurple contains the core IM support for IM clients such as Pidgin
and Finch.
</p><p>
libpurple supports a variety of messaging protocols including AIM, MSN,
Yahoo!, Jabber, Bonjour, Gadu-Gadu, ICQ, IRC, Novell Groupwise, QQ,
Lotus Sametime, SILC, Simple and Zephyr.
</p>
-Des:
##----------------------------------------
=Pkg: libqca2-devel 2.0.1 1.28 x86_64
=Sum: Qt Cryptographic Architecture 2
+Des:
<!-- DT:Rich -->
<p>This package provides a generic Qt cryptographic architecture, including a library and a plugin for using all supported capabilities of openssl, like SSL/TLS, X509, RSA, SHA1, MD5, Blowfish, 3DES and AES.
</p>
-Des:
##----------------------------------------
=Pkg: libqdialogsolver1 1.3.0 1.1.109 x86_64
=Sum: QDialog class for showing solver results
+Des:
<!-- DT:Rich -->
<p>This package provides a QDialog class for showing solver results
</p>
-Des:
##----------------------------------------
=Pkg: libqdialogsolver1-devel 1.3.0 1.1.109 x86_64
=Sum: QDialog class for showing solver results
+Des:
<!-- DT:Rich -->
<p>This package provides a QDialog class for showing solver results.
Included needed header files
</p>
-Des:
##----------------------------------------
=Pkg: libqimageblitz-devel 0.0.4 35.25.94 x86_64
=Sum: Image Effect Library for KDE
+Des:
<!-- DT:Rich -->
<p>Development files for the Blitz library.
</p>
-Des:
##----------------------------------------
=Pkg: libqscintilla-devel 2.3.2 1.24 x86_64
=Sum: C++ Editor Class Library Development Files
+Des:
<!-- DT:Rich -->
<p>QScintilla is a Qt port of Neil Hodgson&#39;s Scintilla C++ editor class.
</p><p>
This is a Qt port from the original Scintilla class (http://www.scintilla.org/).
</p><p>
This package is mainly used by eric, the Python IDE.
</p>
-Des:
##----------------------------------------
=Pkg: libqscintilla2-5 2.3.2 1.24 x86_64
=Sum: C++ Editor Class Library
+Des:
<!-- DT:Rich -->
<p>QScintilla is a Qt port of Neil Hodgson&#39;s Scintilla C++ editor class.
</p><p>
This is a Qt port from the original Scintilla class (http://www.scintilla.org/).
</p><p>
This package is mainly used by eric, the Python IDE.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-devel 4.6.2 1.6.9 x86_64
=Sum: Qt Development Kit
+Des:
<!-- DT:Rich -->
<p>You need this package, if you want to compile programs with Qt. It
contains the &quot;Qt Crossplatform Development Kit&quot;. It does contain include files and development applications like GUI designers, translator tools and code generators.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-devel-doc 4.6.2 1.6.10 x86_64
=Sum: Qt documentation
+Des:
<!-- DT:Rich -->
<p>The package contains documentation and examples to develop Qt
applications. The SuSE help provides a search function for this documentation.
The package includes also a tutorial and examples.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-mysql-32bit 4.6.2 1.6.11 x86_64
=Sum: Qt 4 MySQL support
+Des:
<!-- DT:Rich -->
<p>A plugin to support MySQL server in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-postgresql-32bit 4.6.2 1.6.11 x86_64
=Sum: Qt 4 PostgreSQL plugin
+Des:
<!-- DT:Rich -->
<p>Qt SQL plugin to support PostgreSQL servers in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-postgresql 4.6.2 1.6.11 x86_64
=Sum: Qt 4 PostgreSQL plugin
+Des:
<!-- DT:Rich -->
<p>Qt SQL plugin to support PostgreSQL servers in Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-sqlite-32bit 4.6.2 1.6.9 x86_64
=Sum: Qt 4 sqlite plugin
+Des:
<!-- DT:Rich -->
<p>Qt 4 sqlite plugin to be able to use database functionality with Qt applications without the need to setup a SQL server.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-unixODBC-32bit 4.6.2 1.6.11 x86_64
=Sum: Qt 4 unixODBC plugin
+Des:
<!-- DT:Rich -->
<p>Qt unixODBC plugin to support databases via unixODBC within Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-unixODBC 4.6.2 1.6.11 x86_64
=Sum: Qt 4 unixODBC plugin
+Des:
<!-- DT:Rich -->
<p>Qt unixODBC plugin to support databases via unixODBC within Qt applications.
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod-devel 0.4.2 4.25 x86_64
=Sum: A Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod0 0.4.2 4.25 x86_64
=Sum: A Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libquicktime 1.0.3 3.34 x86_64
=Sum: A Library for Reading and Writing Quicktime Movie Files
+Des:
<!-- DT:Rich -->
<p>A library for reading and writing Quicktime movie files,
based on and forked from quicktime4linux.
</p>
-Des:
##----------------------------------------
=Pkg: libquicktime-devel 1.0.3 3.34 x86_64
=Sum: library for reading/writing quicktime movie files
+Des:
<!-- DT:Rich -->
<p>library for reading/writing quicktime movie files,
based on and forked from quicktime4linux
</p>
-Des:
##----------------------------------------
=Pkg: libraptor-devel 1.4.18 28.21 x86_64
=Sum: Development package for the raptor library
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that use the raptor library.
</p>
-Des:
##----------------------------------------
=Pkg: librasqal-devel 0.9.16 1.21 x86_64
=Sum: Development package for the Rasqal RDF query library
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to develop with the Rasqal RDF query language library.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-devel 1.3.0 17.17 x86_64
=Sum: Development and Include Files for libraw1394
+Des:
<!-- DT:Rich -->
<p>Libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides the user space direct access to the connected 1394 buses.  Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question.
</p><p>
This archive contains the header files for libraw1394 development.
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394-devel-32bit 1.3.0 17.17 x86_64
=Sum: Development and Include Files for libraw1394
+Des:
<!-- DT:Rich -->
<p>Libraw1394 is the only supported interface to the kernel side raw1394 of the Linux IEEE-1394 subsystem, which provides the user space direct access to the connected 1394 buses.  Through libraw1394/raw1394, applications can directly send to and receive from other nodes without requiring a kernel driver for the protocol in question.
</p><p>
This archive contains the header files for libraw1394 development.
</p>
-Des:
##----------------------------------------
=Pkg: librdmacm 1.0.8 9.12 x86_64
=Sum: RDMA cm library.
+Des:
<!-- DT:Rich -->
<p>RDMA cm library
</p>
-Des:
##----------------------------------------
=Pkg: librdmacm-32bit 1.0.8 9.12 x86_64
=Sum: RDMA cm library.
+Des:
<!-- DT:Rich -->
<p>RDMA cm library
</p>
-Des:
##----------------------------------------
=Pkg: librdmacm-devel 1.0.8 9.12 x86_64
=Sum: Development files for the librdmacm library
+Des:
<!-- DT:Rich -->
<p>Development files for the librdmacm library.
</p>
-Des:
##----------------------------------------
=Pkg: librdmacm-devel-32bit 1.0.8 9.12 x86_64
=Sum: Development files for the librdmacm library
+Des:
<!-- DT:Rich -->
<p>Development files for the librdmacm library.
</p>
-Des:
##----------------------------------------
=Pkg: libreadline-java 0.8.0 226.24 x86_64
=Sum: Java Wrapper for the GNU Readline Library
+Des:
<!-- DT:Rich -->
<p>Java-Readline is a port of GNU Readline for Java.  To be more
precise, it is a JNI wrapper for Readline. It is distributed under the
LGPL.
</p>
-Des:
##----------------------------------------
=Pkg: libredland-devel 1.0.8 1.21 x86_64
=Sum: Development package for programs that use Redland.
+Des:
<!-- DT:Rich -->
<p>Files needed to develop with the Redland RDF library.
</p>
-Des:
##----------------------------------------
=Pkg: libreiserfs-devel 0.3.0.5 143.3 x86_64
=Sum: ReiserFS Filesystem Access Tools
+Des:
<!-- DT:Rich -->
<p>This is a library for reiserfs filesystem access and manipulation.
The primary goal is to develop the nice, full functionality library
wich might be linked against any projects which needed reiserfs filesystem
access. There are GNU Parted, GNU GRUB, Yaboot, Partimage, EVMS, etc.
</p><p>
The second goal is high maintainability source code.
</p><p>
The third goal is to develop an alternative set of the reiserfsprogs as
small and nice frontends to this library.
</p><p>
This package contains four programs that are simple frontends to libreiserfs.
There are: mkfs.reiserfs, resizefs.reiserfs, cpfs.reiserfs, tunefs.reiserfs
</p><p>
progsreiserfs supports versions 3.5, 3.6 with standard and relocated journal.
Also all possible blocksizes which supported by kernel (2.4.18 with patches or 2.4.19)
</p><p>
The project homepage is http://reiserfs.linux.kiev.ua
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Normally, the tools from reiserfsprogs should be used rather than these.
</p>
-Ins:
##----------------------------------------
=Pkg: librsvg-devel 2.26.0 2.1.227 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: librsync 0.9.7 103.8 x86_64
=Sum: A Library for Generating Network Deltas
+Des:
<!-- DT:Rich -->
<p>librsync implements the &quot;rsync&quot; algorithm, which allows remote differencing of binary files.  librsync computes a delta relative to a file&#39;s checksum, so the two files need not both be present to generate a delta.
</p>
-Des:
##----------------------------------------
=Pkg: libsamplerate-devel 0.1.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libsatsolver-devel 0.14.17 0.2.18 x86_64
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: libschroedinger-1_0-0 1.0.5 2.36 x86_64
=Sum: Library for decoding and encoding video in the Dirac format
+Des:
<!-- DT:Rich -->
<p>The Schroedinger project implements portable libraries for the high quality
Dirac video codec created by BBC Research and Development. Dirac is a free
and open source codec producing very high image quality video. The project
produces two libraries in ANSI C89, one for decoding and one for encoding.
</p>
-Des:
##----------------------------------------
=Pkg: libsdp 1.1.99 85.15 x86_64
=Sum: Infiniband Sockets Direct Protocol - user space library
+Des:
<!-- DT:Rich -->
<p>libsdp can be LD_PRELOAD-ed to have a sockets application use
InfiniBand Sockets Direct Protocol (SDP) instead of TCP, transparently
and without recompiling the application.
</p>
-Des:
##----------------------------------------
=Pkg: libsdp-32bit 1.1.99 85.15 x86_64
=Sum: Infiniband Sockets Direct Protocol - user space library
+Des:
<!-- DT:Rich -->
<p>libsdp can be LD_PRELOAD-ed to have a sockets application use
InfiniBand Sockets Direct Protocol (SDP) instead of TCP, transparently
and without recompiling the application.
</p>
-Des:
##----------------------------------------
=Pkg: libsdp-devel 1.1.99 85.15 x86_64
=Sum: Infiniband Sockets Direct Protocol - user space library
+Des:
<!-- DT:Rich -->
<p>libsdp can be LD_PRELOAD-ed to have a sockets application use
InfiniBand Sockets Direct Protocol (SDP) instead of TCP, transparently
and without recompiling the application.
</p>
-Des:
##----------------------------------------
=Pkg: libsdp-devel-32bit 1.1.99 85.15 x86_64
=Sum: Infiniband Sockets Direct Protocol - user space library
+Des:
<!-- DT:Rich -->
<p>libsdp can be LD_PRELOAD-ed to have a sockets application use
InfiniBand Sockets Direct Protocol (SDP) instead of TCP, transparently
and without recompiling the application.
</p>
-Des:
##----------------------------------------
=Pkg: libseed-devel 2.28.1 0.1.70 x86_64
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: libseed0 2.28.1 0.1.70 x86_64
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: libselinux-devel 2.0.71 3.98 x86_64
=Sum: Development Include Files and Libraries for SELinux
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a patch of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
This package contains the header files and static libraries, which are
necessary to develop your own software using libselinux.
</p>
-Des:
##----------------------------------------
=Pkg: libsemanage-devel 2.0.27 4.14 x86_64
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsemanage provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsemanage1 2.0.27 4.14 x86_64
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsemanage provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors3-32bit 2.10.6 10.15 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors3-devel 2.10.6 10.15 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors4-devel 3.0.3 4.14.11 x86_64
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsepol-devel 2.0.32 5.99 x86_64
=Sum: Development Include Files and Libraries for SELinux policy manipulation
+Des:
<!-- DT:Rich -->
<p>The libsepol-devel package contains the static libraries and header files
needed for developing applications that manipulate binary policies.
</p>
-Des:
##----------------------------------------
=Pkg: libservicelog 1.0.1 2.16.5 x86_64
=Sum: Servicelog Database and Library
+Des:
<!-- DT:Rich -->
<p>The libservicelgo package contains a library to create and maintain a
database for storing events related to system service.  This database
allows for the logging of serviceable and informational events, and for
the logging of service procedures that have been performed upon the system.
</p>
-Des:
##----------------------------------------
=Pkg: libservicelog-1_0-1 1.0.1 2.16.5 x86_64
=Sum: Servicelog Database and Library
+Des:
<!-- DT:Rich -->
<p>The libservicelgo package contains a library to create and maintain a
database for storing events related to system service.  This database
allows for the logging of serviceable and informational events, and for
the logging of service procedures that have been performed upon the system.
</p>
-Des:
##----------------------------------------
=Pkg: libservicelog-1_0-1-32bit 1.0.1 2.16.5 x86_64
=Sum: Servicelog Database and Library
+Des:
<!-- DT:Rich -->
<p>The libservicelgo package contains a library to create and maintain a
database for storing events related to system service.  This database
allows for the logging of serviceable and informational events, and for
the logging of service procedures that have been performed upon the system.
</p>
-Des:
##----------------------------------------
=Pkg: libservicelog-devel 1.0.1 2.16.5 x86_64
=Sum: Development files for libservicelog
+Des:
<!-- DT:Rich -->
<p>Contains header files for building with libservicelog.
</p>
-Des:
##----------------------------------------
=Pkg: libservicelog-devel-32bit 1.0.1 2.16.5 x86_64
=Sum: Development files for libservicelog
+Des:
<!-- DT:Rich -->
<p>Contains header files for building with libservicelog.
</p>
-Des:
##----------------------------------------
=Pkg: libsexy-devel 0.1.11 168.26 x86_64
=Sum: Extended Widgets for GTK+
+Des:
<!-- DT:Rich -->
<p>A set of extensions on top of GTK+ widgets, to provide extra functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libshout-devel 2.2.2 116.32 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libshout3 2.2.2 116.32 x86_64
=Sum: Library for Communication with icecast Server
+Des:
<!-- DT:Rich -->
<p>Libshout is a library for communicating with and sending data to an icecast server.  It handles the socket connection, the timing of the data, and prevents bad data from getting to the icecast server.
</p>
-Des:
##----------------------------------------
=Pkg: libsidplay1 1.36.59 82.22 x86_64
=Sum: A Library for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you to create packages able to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at:
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: libsidplay1-devel 1.36.59 82.22 x86_64
=Sum: A Library for C64 Music Files
+Des:
<!-- DT:Rich -->
<p>This package allows you to create packages able to play music from C64 games and demos on your PC.
</p><p>
You can find a comprehensive archive on the WWW at:
http://www.hvsc.c64.org/
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2-32bit 2.2.2 40.22 x86_64
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ablity to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2-devel 2.2.2 40.22 x86_64
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ability to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libslab-devel 2.27.91 6.9.24 x86_64
=Sum: Library to create tile-based UI for GNOME - Development Files
+Des:
<!-- DT:Rich -->
<p>This library makes it easy to create tile-based UI for GNOME, as seen in
gnome-main-menu.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbclient-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with smbclient Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to develop
programs which make use of the smbclient programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios-devel 2.0.2 11.8.4 x86_64
=Sum: development headers and archives
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p><p>
This package contains the headers and .a files necessary to compile new
client programs against libsmbios
</p>
-Des:
##----------------------------------------
=Pkg: libsmbsharemodes-devel 3.4.3 1.17.2 x86_64
=Sum: Samba smbsharemodes Library
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of the smbsharemodes programming interface.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: libsmbsharemodes0 3.4.3 1.17.2 x86_64
=Sum: Samba smbsharemodes Library
+Des:
<!-- DT:Rich -->
<p>This package includes the smbsharemodes library.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: libsmi 0.4.5 2.6 x86_64
=Sum: A Library to Access SMI MIB Information
+Des:
<!-- DT:Rich -->
<p>The purpose of libsmi is to
<ul>
<li>Give network management applications a concise programmer-friendly interface
to access MIB module information

</li><li>Separate the knowledge on SMI from the main parts of management applications

</li><li>Allow addition of new kinds of MIB repositories without the need to adapt
applications that make use of libsmi
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libsndfile-devel 1.0.20 2.1.46 x86_64
=Sum: Development package for the libsndfile library
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that
use the libsndfile library.
</p>
-Des:
##----------------------------------------
=Pkg: libsnmp15-32bit 5.4.2.1 8.2.1 x86_64
=Sum: Shared Libraries from net-snmp
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p><p>
</p><p>
This package holds the shared libraries from the net-snmp package.
</p>
-Des:
##----------------------------------------
=Pkg: libsoprano-devel 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is a RDF QT/C++ interface library using redland as a backend
</p>
-Des:
##----------------------------------------
=Pkg: libsoprano4-32bit 2.3.0 4.1.92 x86_64
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is an open and pluggable RDF resource framework which is build on top of QT4. It provides RDF storage, RDF parsing, serialization, inference, and full text indexing in a nice C++ API.
The main target of Soprano are desktop applications as it is being developed as a subroject of Nepomuk, the semantic desktop initiative.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup-devel 2.28.2 0.1.151 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C. It
provides a queued, asynchronous callback-based mechanism for sending
SOAP requests.
This package allows you to develop applications that use the Soup
library.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup-devel-32bit 2.28.2 0.1.151 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C. It
provides a queued, asynchronous callback-based mechanism for sending
SOAP requests.
This package allows you to develop applications that use the Soup
library.
</p>
-Des:
##----------------------------------------
=Pkg: libspectre-devel 0.2.1 2.24 x86_64
=Sum: Library for Rendering PostScript Documents
+Des:
<!-- DT:Rich -->
<p>libspectre is a small library for rendering Postscript documents. It provides a convenient easy to use API for handling and rendering Postscript documents.
</p>
-Des:
##----------------------------------------
=Pkg: libspeex-32bit 1.1.99.91 2.12 x86_64
=Sum: An Open Source, Patent Free Speech Codec Library
+Des:
<!-- DT:Rich -->
<p>Speex is a patent free audio codec designed especially for voice (unlike Vorbis which targets general audio) signals and providing good narrowband and wideband quality. This project aims to be complementary to the Vorbis codec.
</p>
-Des:
##----------------------------------------
=Pkg: libssh-devel 0.2 5.16.1 x86_64
=Sum: SSH library development headers
+Des:
<!-- DT:Rich -->
<p>Development headers for the SSH library.
</p>
-Des:
##----------------------------------------
=Pkg: libssh-devel-doc 0.2 5.16.1 x86_64
=Sum: SSH library api documentation
+Des:
<!-- DT:Rich -->
<p>Documentation for libssh development.
</p>
-Des:
##----------------------------------------
=Pkg: libssh2 0.2 5.16.1 x86_64
=Sum: SSH library
+Des:
<!-- DT:Rich -->
<p>The ssh library was designed to be used by programmers needing a working SSH
implementation by the mean of a library. The complete control of the client is
made by the programmer. With libssh, you can remotely execute programs,
transfer files, use a secure and transparent tunnel for your remote programs.
With its Secure FTP implementation, you can play with remote files easily,
without third-party programs others than libcrypto (from openssl).
</p><p>
This package provides libssh from http://0xbadc0de.be/ that should not be
confused with libssh2 available from http://www.libssh2.org (libssh2 package)
</p>
-Des:
##----------------------------------------
=Pkg: libssh2-1 0.19.0+20080814 2.16.1 x86_64
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libssh2-1-32bit 0.19.0+20080814 2.16.1 x86_64
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libssh2-devel 0.19.0+20080814 2.14 x86_64
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++-devel 4.3 62.198 x86_64
=Sum: The system GNU C++ development files
+Des:
<!-- DT:Rich -->
<p>The system GNU C++ development files.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++33-devel 3.3.3 11.9 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all the headers and libraries of the standard C++ library.
It is needed for compiling C++ code.
</p><p>
The source code is in the package gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++33-devel-32bit 3.3.3 11.9 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all the headers and libraries of the standard C++ library.
It is needed for compiling C++ code.
</p><p>
The source code is in the package gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++45 4.5.0_20100414 1.2.7 x86_64
=Sum: The standard C++ shared library
+Des:
<!-- DT:Rich -->
<p>The standard C++ library, needed for dynamically linked C++ programs.
</p>
-Des:
##----------------------------------------
=Pkg: libstdc++45-devel 4.5.0_20100414 1.2.7 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all the headers and libraries of the standard C++ library.
It is needed for compiling C++ code.
</p><p>
The source code is in the package gcc.
</p>
-Des:
##----------------------------------------
=Pkg: libstrigi0-32bit 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: libstroke 0.5.1 207.20 x86_64
=Sum: A Stroke Translation Library
+Des:
<!-- DT:Rich -->
<p>LibStroke is a stroke interface library.  Strokes are motions
of the mouse that can be interpreted by a program as a command.  Strokes
are used extensively in CAD programs.
</p>
-Des:
##----------------------------------------
=Pkg: libstroke-devel 0.5.1 207.20 x86_64
=Sum: Development package for libstroke
+Des:
<!-- DT:Rich -->
<p>This package is needed if you want to program or compile applications that
use libstroke.
</p>
-Des:
##----------------------------------------
=Pkg: libsynaptics 0.14.6c 53.17 x86_64
=Sum: A Small C++ Library To Use The Synaptics Driver
+Des:
<!-- DT:Rich -->
<p>A Small C++ Library To Use The Synaptics Driver. Used e.g. by ksynaptics.
</p>
-Des:
##----------------------------------------
=Pkg: libsyncml-devel 0.4.4 29.23 x86_64
=Sum: Header files, libraries and development documentation for libsyncml
+Des:
<!-- DT:Rich -->
<p>This package contains the header files, static libraries and
development documentation for libsyncml. If you like to develop
programs using libsyncml, you will need to install this package.
</p>
-Des:
##----------------------------------------
=Pkg: libsyncml0 0.4.4 29.23 x86_64
=Sum: Library providing support for the SyncML protocol
+Des:
<!-- DT:Rich -->
<p>Libsyncml is a implementation of the SyncML protocol.
It allows programs like OpenSync the synchronization of
SyncML-enabled devices, such as the SonyEricsson P800, as well as remote
OpenSync to OpenSync synchronization over the internet.
You need to install the libopensync-* packages and msynctool for that, too.
</p>
-Des:
##----------------------------------------
=Pkg: libtalloc-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with talloc Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of the talloc programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libtasn1-devel 1.5 1.24.41 x86_64
=Sum: ASN.1 parsing library
+Des:
<!-- DT:Rich -->
<p>This is the ASN.1 library used in GNUTLS.
More up to date information can be found at
http://www.gnu.org/software/gnutls and http://www.gnutls.org
</p>
-Des:
##----------------------------------------
=Pkg: libtcnative-1-0 1.2.12 17.1 x86_64
=Sum: JNI wrappers for Apache Portable Runtime for Tomcat
+Des:
<!-- DT:Rich -->
<p>Tomcat can use the Apache Portable Runtime to provide superior scalability,
performance, and better integration with native server technologies. The Apache
Portable Runtime is a highly portable library that is at the heart of Apache
HTTP Server 2.x. APR has many uses, including access to advanced IO
functionality (such as sendfile, epoll and OpenSSL), OS level functionality
(random number generation, system status, etc), and native process handling
(shared memory, NT pipes and Unix sockets).
</p><p>
These features allows making Tomcat a general purpose webserver, will enable
much better integration with other native web technologies, and overall make
Java much more viable as a full fledged webserver platform rather than simply a
backend focused technology.
</p>
-Des:
##----------------------------------------
=Pkg: libtdb-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with tdb Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of the tdb programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy 0.3.3 2.11.65 x86_64
=Sum: A unified framework for all forms of real time conversations
+Des:
<!-- DT:Rich -->
<p>The Telepathy project aims to provide a unified framework for all forms of real time conversations, including instant messaging, IRC, voice calls and video calls. It uses the DBus messaging system to provide a simple interface for client applications, allowing them to quickly benefit from Telepathy&#39;s functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy-devel 0.3.3 2.11.65 x86_64
=Sum: Development files for the telepathy messaging framework
+Des:
<!-- DT:Rich -->
<p>The Telepathy project aims to provide a unified framework for all forms of real time conversations, including instant messaging, IRC, voice calls and video calls. It uses the DBus messaging system to provide a simple interface for client applications, allowing them to quickly benefit from Telepathy&#39;s functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy-farsight0 0.0.11 1.1.155 x86_64
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Telepathy Farsight is a Telepathy client that uses Farsight2 and GStreamer to handle media streaming channels. It&#39;s used as a background process by other Telepathy clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: libtelepathy-glib0 0.8.0 1.1.67 x86_64
=Sum: Libraries for adding telepathy support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
telepathy functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: libthai 0.1.9 9.14 x86_64
=Sum: Thai Language Support Routines
+Des:
<!-- DT:Rich -->
<p>LibThai is a set of Thai language support routines aimed to ease developers&#39; tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions, such as word breaking, input and output methods, and basic character and string support.
</p>
-Des:
##----------------------------------------
=Pkg: libthai-devel 0.1.9 9.14 x86_64
=Sum: Thai Language Support Routines (development files)
+Des:
<!-- DT:Rich -->
<p>LibThai is a set of Thai language support routines aimed to ease developers&#39; tasks to incorporate Thai language support in their applications. It includes important Thai-specific functions, such as word breaking, input and output methods, and basic character and string support.
</p><p>
This package contains headers and libraries required for developing software using libthai.
</p>
-Des:
##----------------------------------------
=Pkg: libtheora-devel 1.0.beta2 6.1.1 x86_64
=Sum: Free Video Codec
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtidy 1.0 34.7 x86_64
=Sum: A library to clean up and pretty-print HTML/XHTML/XML
+Des:
<!-- DT:Rich -->
<p>When editing HTML it&#39;s easy to make mistakes. Wouldn&#39;t it be nice if
there was a simple way to fix these mistakes automatically and tidy up
sloppy editing into nicely layed out markup? Well now there is! Dave
Raggett&#39;s HTML TIDY is a free utility for doing just that. It also works
great on the atrociously hard to read markup generated by specialized
HTML editors and conversion tools, and can help you identify where you
need to pay further attention on making your pages more accessible to
people with disabilities.
</p><p>
</p><p>
Tidy is able to fix up a wide range of problems and to bring to your
attention things that you need to work on yourself. Each item found is
listed with the line number and column so that you can see where the
problem lies in your markup. Tidy won&#39;t generate a cleaned up version
when there are problems that it can&#39;t be sure of how to handle. These
are logged as &quot;errors&quot; rather than &quot;warnings&quot;.
</p><p>
</p><p>
There is a standalone binary /usr/bin/tidy built on this library,
contained in the package &quot;tidy&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libtidy-devel 1.0 34.7 x86_64
=Sum: Include Files and Libraries for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications using functions provided by the tidy library.
</p>
-Des:
##----------------------------------------
=Pkg: libtiff-devel 3.8.2 141.8.1 x86_64
=Sum: Development Tools for Programs which will use the libtiff Library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will manipulate TIFF format image files
using the libtiff library.
</p>
-Des:
##----------------------------------------
=Pkg: libtiff-devel-32bit 3.8.2 141.8.1 x86_64
=Sum: Development Tools for Programs which will use the libtiff Library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and static libraries for
developing programs which will manipulate TIFF format image files
using the libtiff library.
</p>
-Des:
##----------------------------------------
=Pkg: libtirpc-devel 0.2.1 1.2.16 x86_64
=Sum: Transport Independent RPC Library
+Des:
<!-- DT:Rich -->
<p>The Transport Independent RPC library (TI-RPC) is a replacement for
the standard SunRPC library in glibc which does not support IPv6
addresses. This implementation allows the support of other transports
than UDP and TCP over IPv4
</p>
-Des:
##----------------------------------------
=Pkg: libtomoe-gtk0 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: libtool 2.2.6 2.131.1 x86_64
=Sum: A Tool to Build Shared Libraries
+Des:
<!-- DT:Rich -->
<p>GNU libtool is a set of shell scripts to automatically configure UNIX architectures to build shared libraries in a generic fashion.
</p>
-Des:
##----------------------------------------
=Pkg: libtool-32bit 2.2.6 2.131.1 x86_64
=Sum: A Tool to Build Shared Libraries
+Des:
<!-- DT:Rich -->
<p>GNU libtool is a set of shell scripts to automatically configure UNIX architectures to build shared libraries in a generic fashion.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp 0.5.3 126.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable Audio CD, MP3, and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp-devel 0.5.3 126.25 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libtunepimp5 0.5.3 126.25 x86_64
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable Audio CD, MP3, and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libudev-devel 128 13.10.1 x86_64
=Sum: A Rule-Based Device Node and Kernel Event Manager
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: libudev0 128 13.10.1 x86_64
=Sum: A Rule-Based Device Node and Kernel Event Manager
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: libudf0 0.80 6.11 x86_64
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libunique-devel 1.1.2 1.1.279 x86_64
=Sum: A library for writing single instance application - development files
+Des:
<!-- DT:Rich -->
<p>Unique is a library for writing single instance application. If you launch a single instance application twice, the second instance will either just quit or will send a message to the running instance.
</p>
-Des:
##----------------------------------------
=Pkg: libunwind 0.98.6 26.6 x86_64
=Sum: Unwind Library
+Des:
<!-- DT:Rich -->
<p>A portable and efficient C programming interface (API) to determine the call chain of a program.
</p>
-Des:
##----------------------------------------
=Pkg: libunwind-devel 0.98.6 26.6 x86_64
=Sum: Unwind library
+Des:
<!-- DT:Rich -->
<p>A portable and efficient C programming interface (API) to determine the call-chain of a program.
</p>
-Des:
##----------------------------------------
=Pkg: libupsclient1 2.2.2 69.11 x86_64
=Sum: Network UPS Tools Library (Unbreakable Power Supply Monitoring)
+Des:
<!-- DT:Rich -->
<p>Shared library for the Network UPS Tools.
</p><p>
Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware.
</p><p>
Detailed information about supported hardware can be found in
/usr/share/doc/packages/nut.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0-0 0.9.3 4.22 x86_64
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0-devel 0.9.3 4.22 x86_64
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-devel 0.1.12 139.1.1 x86_64
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libusbpp-0_1-4 0.1.12 139.1.1 x86_64
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libustr-1_0-1 1.0.4 3.22 x86_64
=Sum: String library, very low memory overhead, simple to import
+Des:
<!-- DT:Rich -->
<p>Micro string library, very low overhead from plain strdup() (Ave. 44% for
0-20B strings). Very easy to use in existing C code. At it&#39;s simplest you can
just include a single header file into your .c and start using it.
This package also distributes pre-built shared libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libustr-devel 1.0.4 3.22 x86_64
=Sum: String library, very low memory overhead, simple to import
+Des:
<!-- DT:Rich -->
<p>Micro string library, very low overhead from plain strdup() (Ave. 44% for
0-20B strings). Very easy to use in existing C code. At it&#39;s simplest you can
just include a single header file into your .c and start using it.
This package also distributes pre-built shared libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libuuid-devel 2.16 6.8.2 x86_64
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libuuid-devel-32bit 2.16 6.8.2 x86_64
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt-devel 0.7.6 1.9.8 x86_64
=Sum: A C toolkit to interract with the virtualization capabilities of Linux
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization capabilities Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API initially for the Xen paravirtualization but should be able to integrate other virtualization mechanisms if needed.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual-devel 0.4.0 175.12 x86_64
=Sum: sound visualisation library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that want audio visualisation and audio visualisation
plugins.
</p><p>
This library is used by amaroK for example.
</p>
-Des:
##----------------------------------------
=Pkg: libvoikko-devel 2.0 2.26 x86_64
=Sum: Spellchecker and Hyphenator for Finnish Language
+Des:
<!-- DT:Rich -->
<p>Voikko is a Finnish spellchecker and hyphenator based on Malaga and Suomi-Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: libvoikko1 2.0 2.26 x86_64
=Sum: Spellchecker and Hyphenator for Finnish Language
+Des:
<!-- DT:Rich -->
<p>Voikko is a Finnish spellchecker and hyphenator based on Malaga and Suomi-Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: libvolume_id-devel 128 13.10.1 x86_64
=Sum: Devel package for libvolume_id
+Des:
<!-- DT:Rich -->
<p>This is the devel package for the library libvolume_id, a dynamic library, which contains functions to get volume ids.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis-devel 1.2.0 79.12 x86_64
=Sum: Include Files and Libraries mandatory for Ogg Vorbis Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to compile and develop applications that use <a href="pkg://libvorbis">libvorbis</a>.
</p>
-Des:
##----------------------------------------
=Pkg: libvpd2 2.1.1 0.1.43 x86_64
=Sum: VPD Database access library for lsvpd
+Des:
<!-- DT:Rich -->
<p>The libvpd_cxx package contains the classes that are used to access a vpd database created by vpdupdate in the lsvpd package.
</p>
-Des:
##----------------------------------------
=Pkg: libvpd2-devel 2.1.1 0.1.43 x86_64
=Sum: VPD Database access library for lsvpd
+Des:
<!-- DT:Rich -->
<p>The libvpd-devel package contains development libraries and header files that are used to access a vpd database created by vpdupdate in the lsvpd package.
</p>
-Des:
##----------------------------------------
=Pkg: libwbclient-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with wbclient Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to
develop programs which make use of the wbclient programming interface.
</p>
-Des:
##----------------------------------------
=Pkg: libwbxml2-0 0.9.2_SVN59 11.18 x86_64
=Sum: WBXML parser and compiler library
+Des:
<!-- DT:Rich -->
<p>wbxml2 is a library that includes a WBXML parser and a WBXML compiler.
Unlike wbxml, it does not depend on libxml2 but on expat, making it faster and more portable.
WBXML Library contains a library and its associated tools to Parse, Encode and Handle WBXML documents. The WBXML (Wireless Binary XML) format is a binary representation of XML, and it has been defined by the Wap Forum.
</p>
-Des:
##----------------------------------------
=Pkg: libwbxml2-devel 0.9.2_SVN59 11.18 x86_64
=Sum: WBXML parser and compiler library
+Des:
<!-- DT:Rich -->
<p>wbxml2 is a library that includes a WBXML parser and a WBXML compiler.
Unlike wbxml, it does not depend on libxml2 but on expat, making it faster and more portable.
WBXML Library contains a library and its associated tools to Parse, Encode and Handle WBXML documents. The WBXML (Wireless Binary XML) format is a binary representation of XML, and it has been defined by the Wap Forum.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-1_0-1 1.0.1 0.1.141 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-1_0-2 1.1.15.1 1.3.146 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-devel 1.1.15.1 1.3.146 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit-lang 1.1.15.1 1.3.146 x86_64
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf 0.2.8.4 206.27.4 x86_64
=Sum: Library and Utilities for Displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-32bit 0.2.8.4 206.27.4 x86_64
=Sum: Library and Utilities for Displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-devel 0.2.8.4 206.27.4 x86_64
=Sum: Static libraries, header files and documentation for libwmf
+Des:
<!-- DT:Rich -->
<p>The libwmf-devel package contains the header files and static
libraries necessary for developing programs using libwmf.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-gnome 0.2.8.4 206.27.4 x86_64
=Sum: GNOME plugin for displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwmf-gnome-32bit 0.2.8.4 206.27.4 x86_64
=Sum: GNOME plugin for displaying and Converting Metafile Images
+Des:
<!-- DT:Rich -->
<p>This library interprets metafile images and can either display them
using the X Window System or convert them to standard formats such as PNG, JPEG, PS, EPS, and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck-devel 2.28.0 2.2.263 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-0_8-8 0.8.14 4.33 x86_64
=Sum: Library for Importing WordPerfect (tm) Documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading or interpreting data from WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (for example, a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-devel 0.8.14 4.33 x86_64
=Sum: Library for importing WordPerfect (tm) documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading (or, interpreting data from) WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (e.g.: a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd-devel-doc 0.8.14 4.33 x86_64
=Sum: Documentation for the libwpd API
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for the libwpd API.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg-0_1-1 0.1.3 3.33 x86_64
=Sum: Library to read and parse graphics in WordPerfect Graphics format
+Des:
<!-- DT:Rich -->
<p>libwpg is a C++ library to read and parse graphics in WPG (WordPerfect Graphics) format. It is cross-platform, at the moment it can be build on Microsoft Windows and Linux.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg-devel 0.1.3 3.33 x86_64
=Sum: Files for Developing with libwpg
+Des:
<!-- DT:Rich -->
<p>libwpg is a C++ library to read and parse graphics in WPG (WordPerfect Graphics) format. It is cross-platform, at the moment it can be build on Microsoft Windows and Linux.
</p><p>
This package contains the libwpg development files.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg-devel-doc 0.1.3 3.33 x86_64
=Sum: Documentation for the libwpg API
+Des:
<!-- DT:Rich -->
<p>This package contains documentation for the libwpg API.
</p>
-Des:
##----------------------------------------
=Pkg: libwps-0_1-1 0.1.2 5.33 x86_64
=Sum: Library for importing the Microsoft Works word processor file format
+Des:
<!-- DT:Rich -->
<p>libwps is a library (for use by word procesors, for example) for importing the Microsoft Works word processor file format.
</p>
-Des:
##----------------------------------------
=Pkg: libwps-devel 0.1.2 5.33 x86_64
=Sum: Files for Developing with libwps
+Des:
<!-- DT:Rich -->
<p>libwps is a library (for use by word procesors, for example) for importing the Microsoft Works word processor file format.
</p><p>
</p><p>
This package contains the libwps development files.
</p>
-Des:
##----------------------------------------
=Pkg: libwsman-devel 2.2.3 0.6.5 x86_64
=Sum: Opensource Implementation of WS-Management
+Des:
<!-- DT:Rich -->
<p>Opensource Implementation of WS-Management
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt-devel 3.0.3 0.1.50 x86_64
=Sum: Development Include Files and Libraries for enhanced crypt functionality
+Des:
<!-- DT:Rich -->
<p>libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, and passwords with
blowfish encryption.
</p><p>
This package contains the header files and static libraries
necessary to develop software using libxcrypt.
</p>
-Des:
##----------------------------------------
=Pkg: libxine-devel 1.1.15 23.3.9 x86_64
=Sum: Development environment for xine-based media players
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files, libraries and configuration files needed to compile applications that use the xine media player.
</p>
-Des:
##----------------------------------------
=Pkg: libxine1 1.1.15 23.3.9 x86_64
=Sum: Video Player with Plug-Ins
+Des:
<!-- DT:Rich -->
<p>xine is a free multimedia player. It plays back CDs, DVDs, and VCDs. It also decodes multimedia files like AVI, MOV, WMV, and MP3 from local disk drives, and displays multimedia streamed over the Internet. It interprets many of the most common multimedia formats available - and some of the most uncommon formats, too.
</p><p>
The libxine1 package may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/xine#Legal_Matters
</p>
-Des:
##----------------------------------------
=Pkg: libxine1-32bit 1.1.15 23.3.9 x86_64
=Sum: Video Player with Plug-Ins
+Des:
<!-- DT:Rich -->
<p>xine is a free multimedia player. It plays back CDs, DVDs, and VCDs. It also decodes multimedia files like AVI, MOV, WMV, and MP3 from local disk drives, and displays multimedia streamed over the Internet. It interprets many of the most common multimedia formats available - and some of the most uncommon formats, too.
</p><p>
The libxine1 package may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/xine#Legal_Matters
</p>
-Des:
##----------------------------------------
=Pkg: libxine1-gnome-vfs 1.1.15 23.3.9 x86_64
=Sum: gnome-vfs plugin for xine
+Des:
<!-- DT:Rich -->
<p>gnome-vfs xine input plugin
</p>
-Des:
##----------------------------------------
=Pkg: libxine1-pulse 1.1.15 23.3.9 x86_64
=Sum: pulseaudio plugin for xine
+Des:
<!-- DT:Rich -->
<p>xine sound output plugin for the pulseaudio soundserver
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier-devel 4.0 1.1.73 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier12-32bit 3.7 1.20 x86_64
=Sum: Library with X keyboard related functions
+Des:
<!-- DT:Rich -->
<p>This library allows you to simplify XKB-related development.
</p>
-Des:
##----------------------------------------
=Pkg: libxml++ 2.26.1 1.1.59 x86_64
=Sum: C++ Interface for XML Files
+Des:
<!-- DT:Rich -->
<p>libXML++ provides a C++ interface for XML files.
It presently uses libxml2 to access the XML files.
</p>
-Des:
##----------------------------------------
=Pkg: libxml++-devel 2.26.1 1.1.59 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxml 1.8.17 481.19.2 x86_64
=Sum: A Library to Manipulate XML Files
+Des:
<!-- DT:Rich -->
<p>XML is said to be the upcoming standard file format of the World Wide Web.
</p><p>
Applications use libxml to load and save extensible data structures
and the new Web format.
</p><p>
New applications should use version 2 of libxml (libxml2).
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This version is deprecated.  If you want to use libxml for your own project, use version 2 of this library (package libxml2).
</p>
-Ins:
##----------------------------------------
=Pkg: libxml-32bit 1.8.17 481.19.2 x86_64
=Sum: A Library to Manipulate XML Files
+Des:
<!-- DT:Rich -->
<p>XML is said to be the upcoming standard file format of the World Wide Web.
</p><p>
Applications use libxml to load and save extensible data structures
and the new Web format.
</p><p>
New applications should use version 2 of libxml (libxml2).
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This version is deprecated.  If you want to use libxml for your own project, use version 2 of this library (package libxml2).
</p>
-Ins:
##----------------------------------------
=Pkg: libxml-devel 1.8.17 481.19.2 x86_64
=Sum: libxml Development Package (Version 1)
+Des:
<!-- DT:Rich -->
<p>Libraries and includes for compiling applications that use libxml.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This version is deprecated.  If you want to use libxml for your own project, use version 2 of this library (package libxml2).
</p>
-Ins:
##----------------------------------------
=Pkg: libxml2-devel 2.7.6 0.1.37 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2-devel-32bit 2.7.6 0.1.37 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt-devel 1.1.24 19.15 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt-devel-32bit 1.1.24 19.15 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt-python 1.1.24 19.21 x86_64
=Sum: Python Bindings for libxslt
+Des:
<!-- DT:Rich -->
<p>The libxslt-python package contains a module that permits applications
written in the Python programming language to use the interface
supplied by the libxslt library to apply XSLT transformations.
</p><p>
This library allows parsing stylesheets. It uses the libxml2-python
to load and save XML and HTML files. Direct access to XPath and
the XSLT transformation context are possible. Thus it is possible
to extend the XSLT language with XPath functions written in Python.
</p>
-Des:
##----------------------------------------
=Pkg: libzio-devel 0.9 5.77 x86_64
=Sum: Libzio development files
+Des:
<!-- DT:Rich -->
<p>Libzio development files including zio.h,
the manual page fzopen(3), and static library.
</p>
-Des:
##----------------------------------------
=Pkg: libzip-devel 0.9 1.22 x86_64
=Sum: C library for reading, creating, and modifying zip archives
+Des:
<!-- DT:Rich -->
<p>libzip is a C library for reading, creating, and modifying zip archives. Files can be added from data buffers, files, or compressed data copied directly from other zip archives. Changes made without closing the archive can be reverted. The API is documented by man pages.
</p>
-Des:
##----------------------------------------
=Pkg: libzvbi0 0.2.33 1.17 x86_64
=Sum: VBI Decoding Library
+Des:
<!-- DT:Rich -->
<p>VBI stands for Vertical Blanking Interval, a gap between the image
data transmitted in an analog video signal. This gap is used to
transmit AM modulated data for various data services like Teletext
and Closed Caption.
</p><p>
The zvbi library provides routines to read from raw VBI sampling
devices, to demodulate raw to sliced VBI data, and to interpret
the data of several popular services.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp-devel 6.31.4 0.3.8 x86_64
=Sum: Package, Patch, Pattern, and Product Management - developers files
##----------------------------------------
=Pkg: libzypp-testsuite-tools 4.2.11 1.1.87 x86_64
=Sum: Package, Patch, Pattern, and Product Management - testsuite-tools
+Des:
<!-- DT:Rich -->
<p>Package, Patch, Pattern, and Product Management - testsuite-tools
</p>
-Des:
##----------------------------------------
=Pkg: libzypp-testsuite-tools-data 4.2.11 1.1.87 x86_64
=Sum: Package, Patch, Pattern, and Product Management - testsuite-tools
+Des:
<!-- DT:Rich -->
<p>Package, Patch, Pattern, and Product Management - testsuite-tools
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd 1.4.20 2.39.1 x86_64
=Sum: A Secure, Fast, Compliant, and Very Flexible Web Server
+Des:
<!-- DT:Rich -->
<p>Lighttpd is a secure, fast, compliant, and very flexible Web server that
has been optimized for high-performance environments. It has a very low
memory footprint compared to other Web servers and takes care of
CPU load. Its advanced feature set (FastCGI, CGI, Auth,
Output-Compression, URL-Rewriting, and more) makes lighttpd the
perfect Web server software for every server that is suffering load
problems.
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_cml 1.4.20 2.39.1 x86_64
=Sum: CML (Cache Meta Language) module for Lighttpd
+Des:
<!-- DT:Rich -->
<p>CML is a Meta language to describe the dependencies of a page at one side
and building a page from its fragments on the oth er side using LUA.
</p><p>
CML (Cache Meta Language) wants to solves several problems:
<ul>
<li>dynamic content needs caching to perform
</li><li>checking if the content is dirty inside of the application is usually
more expensive than sending out the cached data
</li><li>a dynamic page is usually fragmented and the fragments have different
livetimes
</li><li>the different fragements can be cached independently
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_magnet 1.4.20 2.39.1 x86_64
=Sum: A module to control the request handling in lighttpd
+Des:
<!-- DT:Rich -->
<p>A module to control the request handling in lighttpd.
</p><p>
It is the successor of mod_cml.
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_mysql_vhost 1.4.20 2.39.1 x86_64
=Sum: MySQL based virtual hosts (vhosts) module for Lighttpd
+Des:
<!-- DT:Rich -->
<p>With MySQL based vhosting you can put the information where to look for a.
document-root of a given host into a MySQL database.
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_rrdtool 1.4.20 2.39.1 x86_64
=Sum: Lighttpd module to feed rrdtool databases
+Des:
<!-- DT:Rich -->
<p>RRD_tool is a system to store and display time-series data (i.e. network
bandwidth, machine-room temperature, server load average).
</p><p>
This module feeds an rrdtool database with the traffic stats from lighttpd.
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_trigger_b4_dl 1.4.20 2.39.1 x86_64
=Sum: Another anti hot-linking module for Lighttpd
+Des:
<!-- DT:Rich -->
<p>Anti Hotlinking:
<ul>
<li>if user requests &#39;&#39;download-url&#39;&#39; directly the request is denied and
he is redirected to &#39;&#39;deny-url&#39;
</li><li>if user visits &#39;&#39;trigger-url&#39;&#39; before requesting &#39;&#39;download-url&#39;&#39;
access is granted
</li><li>if user visits &#39;&#39;download-url&#39;&#39; again after &#39;&#39;trigger-timeout&#39;&#39; has
run down to the request is denied and he is redirected  to &#39;&#39;deny-url&#39;&#39;
</li></ul>
The storage for the trigger information is either stored locally in a gdbm
file or remotly in memcached.
</p>
-Des:
##----------------------------------------
=Pkg: lighttpd-mod_webdav 1.4.20 2.39.1 x86_64
=Sum: WebDAV module for Lighttpd
+Des:
<!-- DT:Rich -->
<p>The WebDAV module is a very minimalistic implementation of RFC 2518.
Minimalistic means that not all operations are implementated yet..
</p><p>
So far we have
<ul>
<li>PROPFIND
</li><li>OPTIONS
</li><li>MKCOL
</li><li>DELETE
</li><li>PUT
</li></ul>
and the usual GET, POST, HEAD from HTTP/1.1..
</p><p>
So far mounting a webdav resource into Windows XP works and the basic litmus
tests are passed.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-control 1.5.3 0.2.11 x86_64
=Sum: Limal pluglib to Control the AppArmor service
+Des:
<!-- DT:Rich -->
<p>Limal pluglib for AppArmor that provides hooks to enable and disable the AppArmor service.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-control-devel 1.5.3 0.2.11 x86_64
=Sum: Development libraries and header files for the apparmor-control limal pluglib.
+Des:
<!-- DT:Rich -->
<p>Development libraries and header files for the apparmor-control limal pluglib.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-notifications-devel 1.0.0 151.24 x86_64
=Sum: Development libraries and header files for apparmor-notifications limal
+Des:
<!-- DT:Rich -->
<p>Development libraries and header files for the apparmor-notifications limal pluglib.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-reporting 1.1.0 115.23 x86_64
=Sum: Limal pluglib for working with AppArmor's notification configuration.
+Des:
<!-- DT:Rich -->
<p>Limal pluglib for working with AppArmor&#39;s notification configuration.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-reporting-devel 1.1.0 115.23 x86_64
=Sum: Development libraries and header files for apparmor-reporting limal
+Des:
<!-- DT:Rich -->
<p>Development libraries and header files for the apparmor-reporting limal pluglib.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm-devel 1.5.22 0.2.15 x86_64
=Sum: LiMaL - CA Management Library Development Files
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
Certificate Authority. This package includes the header files and development
documentation.
</p>
-Des:
##----------------------------------------
=Pkg: limal-devel 1.5.3 0.2.11 x86_64
=Sum: LiMaL - Core Library Development Files
+Des:
<!-- DT:Rich -->
<p>LiMaL - Core Library Development Files
</p>
-Des:
##----------------------------------------
=Pkg: limal-nfs-server-devel 1.5.3 0.2.11 x86_64
=Sum: LiMaL--NFS Server Library Development Files
+Des:
<!-- DT:Rich -->
<p>LiMaL NFS Server Library provides methods for managing a NFS Server.
</p><p>
This package includes the header files and development documentation.
</p>
-Des:
##----------------------------------------
=Pkg: limal-runlevel 1.5.3 0.2.14 x86_64
=Sum: LiMaL - Runlevel Library
+Des:
<!-- DT:Rich -->
<p>The LiMaL Runlevel Library provides methods for runlevel and service management.
</p>
-Des:
##----------------------------------------
=Pkg: limal-runlevel-devel 1.5.3 0.2.14 x86_64
=Sum: LiMaL - Runlevel Library Development Files
+Des:
<!-- DT:Rich -->
<p>The LiMaL Runlevel Library provides methods for runlevel and service management.
</p><p>
This package provides files required for development using the library.
</p>
-Des:
##----------------------------------------
=Pkg: linux-atm-devel 2.5.0 135.22 x86_64
=Sum: Development for ATM
+Des:
<!-- DT:Rich -->
<p>Libraries and header files for ATM (Asynchronous
Transfer Mode) networking.
</p>
-Des:
##----------------------------------------
=Pkg: linuxrc 3.3.59 0.2.10 x86_64
=Sum: SUSE Installation Program
+Des:
<!-- DT:Rich -->
<p>SUSE installation program.
</p>
-Des:
##----------------------------------------
=Pkg: lirc 0.8.4 2.16 x86_64
=Sum: Tools for Infrared Receivers
+Des:
<!-- DT:Rich -->
<p>LIRC is a package that supports receiving and sending IR signals with the most
common IR remote controls. It contains a daemon that decodes and sends IR
signals, a mouse daemon that translates IR signals to mouse movements, and a
couple of user programs that allow you to control your computer with a remote
control.
</p>
-Des:
##----------------------------------------
=Pkg: lirc-32bit 0.8.4 2.16 x86_64
=Sum: Tools for Infrared Receivers
+Des:
<!-- DT:Rich -->
<p>LIRC is a package that supports receiving and sending IR signals with the most
common IR remote controls. It contains a daemon that decodes and sends IR
signals, a mouse daemon that translates IR signals to mouse movements, and a
couple of user programs that allow you to control your computer with a remote
control.
</p>
-Des:
##----------------------------------------
=Pkg: lksctp-tools 1.0.9 1.22 x86_64
=Sum: Utilities for SCTP (Stream Control Transmission Protocol)
+Des:
<!-- DT:Rich -->
<p>This package contains the SCTP base runtime library and command
line tools.
</p><p>
SCTP (Stream Control Transmission Protocol) is a message-oriented,
reliable transport protocol with congestion control, support for
transparent multihoming, and multiple ordered streams of messages.
</p>
-Des:
##----------------------------------------
=Pkg: lksctp-tools-devel 1.0.9 1.22 x86_64
=Sum: Development files for SCTP (Stream Control Transmission Protocol)
+Des:
<!-- DT:Rich -->
<p>This package contains the SCTP development libraries and C header files.
</p><p>
SCTP (Stream Control Transmission Protocol) is a message oriented,
reliable transport protocol, with congestion control, support for
transparent multi-homing, and multiple ordered streams of messages.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth-devel 1.4.2 3.20 x86_64
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It&#39;s designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: lprng 3.8.28 122.16 x86_64
=Sum: LPRng Print Spooler
+Des:
<!-- DT:Rich -->
<p>The LPRng software is an enhanced, extended, and portable implementation
of the Berkeley LPR print spooler functionality. While providing the
same interface and meeting RFC1179 requirements, the implementation
is completely new and provides support for the following features:
lightweight (no databases needed) lpr, lpc, and lprm programs; dynamic
redirection of print queues; automatic job holding; highly verbose
diagnostics; multiple printers serving a single queue; and a greatly
improved permission and authorization mechanism.
</p><p>
LPRng provides emulation packages for the SVR4 lp and lpstat programs,
eliminating the need for another print spooler package. These emulation
packages can be modified according to local requirements to
support vintage printing systems.
</p><p>
Attention: Interoperability with older LPD implementations
requires privileged access to ports.  Therefore all affected
client-programs ship with SUID root privileges.
</p>
-Des:
##----------------------------------------
=Pkg: lpsolve-devel 5.5.0.13 2.22 x86_64
=Sum: Files for Developing with lpsolve
+Des:
<!-- DT:Rich -->
<p>Includes and definitions for developing with the lpsolve library.
</p>
-Des:
##----------------------------------------
=Pkg: lsb-appchk 3.3 5.21 x86_64
=Sum: LSB application linking compliance checker
+Des:
<!-- DT:Rich -->
<p>Checks whether a binary uses only LSB-compliant symbols.
</p>
-Des:
##----------------------------------------
=Pkg: lsb-buildenv 4.0 4.17 x86_64
=Sum: Building environment for LSB-compliant applications
+Des:
<!-- DT:Rich -->
<p>Headers, library proxies and tools for building LSB-compliant applications.
</p>
-Des:
##----------------------------------------
=Pkg: lsscsi 0.23 0.3.1 x86_64
=Sum: List all SCSI devices in the system
+Des:
<!-- DT:Rich -->
<p>The lsscsi command lists information about SCSI devices in Linux.
</p>
-Des:
##----------------------------------------
=Pkg: ltrace 0.4 153.18 x86_64
=Sum: Trace the Library and System Calls a Program Makes
+Des:
<!-- DT:Rich -->
<p>Ltrace is a program that runs the specified command until it exits.
It intercepts and records the dynamic library calls that are called by
the executed process and the signals that are received by that process.
It can also intercept and print the system calls executed by the program.
</p><p>
The program to trace need not be recompiled for this, so you can
use ltrace on binaries for which you do not have access to the source.
</p><p>
This is still a work in progress, so, for example, the tracking to child processes
may fail or some things may not work as expected.
</p>
-Des:
##----------------------------------------
=Pkg: ltrace-32bit 0.4 153.18 x86_64
=Sum: Trace the Library and System Calls a Program Makes
+Des:
<!-- DT:Rich -->
<p>Ltrace is a program that runs the specified command until it exits.
It intercepts and records the dynamic library calls that are called by
the executed process and the signals that are received by that process.
It can also intercept and print the system calls executed by the program.
</p><p>
The program to trace need not be recompiled for this, so you can
use ltrace on binaries for which you do not have access to the source.
</p><p>
This is still a work in progress, so, for example, the tracking to child processes
may fail or some things may not work as expected.
</p>
-Des:
##----------------------------------------
=Pkg: lua 5.1.4 1.15 x86_64
=Sum: Small Embeddable Language with Simple Procedural Syntax
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
Lua combines simple procedural syntax (similar to Pascal) with powerful data description constructs based on associative arrays and extensible semantics. Lua is dynamically typed, interpreted from byte codes, and has automatic memory management, making it ideal for configuration, scripting, and rapid prototyping. Lua is implemented as a small library of C functions, written in ANSI C, and the implementation goals are simplicity, efficiency, portability, and low embedding cost.
</p>
-Des:
##----------------------------------------
=Pkg: lua-devel 5.1.4 1.15 x86_64
=Sum: Development files for lua
+Des:
<!-- DT:Rich -->
<p>Lua is a programming language originally designed for extending applications, but also frequently used as a general-purpose, stand-alone language.
</p><p>
This package contains files needed for embedding lua into your application.
</p>
-Des:
##----------------------------------------
=Pkg: lxc 0.6.5 1.2.31 x86_64
=Sum: Lxc container implementation
+Des:
<!-- DT:Rich -->
<p>It provides commands to create and manage containers. It contains a full
featured container with the isolation/virtualization of the pids, the ipc, the
utsname, the mount points, /proc, /sys, the network and it takes into account
the control groups. It is very light, flexible, and provides a set of tools
around the container like the monitoring with asynchronous events notification,
or the freeze of the container. This package is useful to create Virtual Private
Server, or to run isolated applications like bash or sshd.
</p>
-Des:
##----------------------------------------
=Pkg: lxc-devel 0.6.5 1.2.31 x86_64
=Sum: Development library for lxc
+Des:
<!-- DT:Rich -->
<p>Lxc header files and library needed for development of containers.
</p>
-Des:
##----------------------------------------
=Pkg: lynx 2.8.6 143.19 x86_64
=Sum: A Text-Based WWW Browser
+Des:
<!-- DT:Rich -->
<p>Lynx is an easy-to-use browser for HTML documents and other Internet
services like FTP, telnet, and news.  Lynx is fast.  It is purely text based
and therefore makes it possible to use WWW resources on text terminals.
</p>
-Des:
##----------------------------------------
=Pkg: lyx 1.6.0 1.30 x86_64
=Sum: LaTeX-Based WYSIWYG Editor
+Des:
<!-- DT:Rich -->
<p>LyX is a front-end for LaTeX under X11. It combines the comfortable use
of a word processor with the high quality of LaTeX typesetting.
Documents are displayed in a WYSIWYG-like way.
User does not choose low level attributes (&quot;large italic&quot;) but high level
layouts (styles) for each paragraph. Of course, low level formatting is
still possible.
</p>
-Des:
##----------------------------------------
=Pkg: lzma 4.32.7 1.25 x86_64
=Sum: Programme de compression de fichiers
+Des:
<!-- DT:Rich -->
<p>lzma is a very powerful program for compressing files.
<ul>
<li>Average compression ratio of LZMA is about 30% better than that of gzip, and 15% better than that of bzip2.
</li><li>Decompression speed is only little slower than that of gzip, being two to five times faster than bzip2.
</li><li>In fast mode, compresses faster than bzip2 with a comparable compression ratio.
</li><li>Achieving the best compression ratios takes four to even twelve times longer than with bzip2. However. this doesn&#39;t affect decompressing speed.
</li><li>Very similar command line interface than what gzip and bzip2 have.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: lzma-alpha-devel 4.42.3alpha 13.99 x86_64
=Sum: Programme de compression de fichiers
+Des:
<!-- DT:Rich -->
<p>lzma is a very powerful program for compressing files.
<ul>
<li>Average compression ratio of LZMA is about 30% better than that of
gzip, and 15% better than that of bzip2.

</li><li>Decompression speed is only little slower than that of gzip, being
two to five times faster than bzip2.

</li><li>In fast mode, compresses faster than bzip2 with a comparable
compression ratio.

</li><li>Achieving the best compression ratios takes four to even twelve
times longer than with bzip2. However. this doesn&#39;t affect
decompressing speed.

</li><li>Very similar command line interface than what gzip and bzip2 have.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: lzma-devel 4.32.7 1.25 x86_64
=Sum: Development package for the LZMA decoder library
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries needed for compiling programs using the LZMA decoder library <a href="pkg://liblzmadec0">liblzmadec0</a>
</p>
-Des:
##----------------------------------------
=Pkg: lzo-devel 2.03 3.18 x86_64
=Sum: Development files for lzo
+Des:
<!-- DT:Rich -->
<p>LZO is a portable lossless data compression library written in ANSI C. It offers pretty fast compression and very fast decompression. Decompression requires no memory.
LZO is suitable for data de-/compression in real-time. This means it favours speed over compression ratio.
</p>
-Des:
##----------------------------------------
=Pkg: lzo-devel-32bit 2.03 3.18 x86_64
=Sum: Development files for lzo
+Des:
<!-- DT:Rich -->
<p>LZO is a portable lossless data compression library written in ANSI C. It offers pretty fast compression and very fast decompression. Decompression requires no memory.
LZO is suitable for data de-/compression in real-time. This means it favours speed over compression ratio.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-lib-devel 1.5.1 42.29 x86_64
=Sum: Multilingual text processing library for the C language
+Des:
<!-- DT:Rich -->
<p>A multilingual text processing library for the C language
</p>
-Des:
##----------------------------------------
=Pkg: makedumpfile 1.3.1 3.22.5 x86_64
=Sum: Partial kernel dump
+Des:
<!-- DT:Rich -->
<p>makedumpfile is a dump program to shorten the size of dump file.
It copies only the necessary pages for analysis with various
dump levels, and can compress the page data.
The obtained dump file can by analyzed via gdb or crash utility.
</p>
-Des:
##----------------------------------------
=Pkg: malaga 7.12 2.16 x86_64
=Sum: A Grammar Development Environment for Natural Languages
+Des:
<!-- DT:Rich -->
<p>Malaga is a software package for the development and application of grammars that are used for the analysis of words and sentences
of natural languages. It contains a programming language for the
modelling of morphology and syntax grammars.
</p><p>
Malaga is based on the grammatical theory of the &quot;Left Associative Grammar&quot;
(LAG), developed by Roland Hausser, professor for Computational Linguistics at
University of Erlangen, Germany.
</p>
-Des:
##----------------------------------------
=Pkg: marble 4.3.5 0.2.44 x86_64
=Sum: Une visionneuse de cartes
+Des:
<!-- DT:Rich -->
<p>Marble est une visionneuse de cartes
</p>
-Des:
##----------------------------------------
=Pkg: marble-devel 4.3.5 0.2.44 x86_64
=Sum: Environnement de compilation pour la visionneuse de cartes
+Des:
<!-- DT:Rich -->
<p>Marble est une visionneuse de cartes
</p>
-Des:
##----------------------------------------
=Pkg: mdbtools 0.6pre1 16.2.4 x86_64
=Sum: A Suite of Libraries and Programs to Access Microsoft Access Databases
+Des:
<!-- DT:Rich -->
<p>Mdbtools contains:
mdb-dump   -- simple hex dump utility for looking at mdb files
mdb-schema -- prints DDL for the specified table
mdb-export -- export table to CSV format
mdb-tables -- a simple dump of table names to be used with shell scripts
mdb-header -- generates a C header to be used in exporting mdb data to a C prog
mdb-parsecvs -- generates a C program given a CSV file made with mdb-export
mdb-sql -- demo SQL engine program
mdb-ver -- print version of database
</p>
-Des:
##----------------------------------------
=Pkg: mdbtools-devel 0.6pre1 16.2.4 x86_64
=Sum: All files necessary for development with the MDB Tools libraries
+Des:
<!-- DT:Rich -->
<p>Mdbtools contains:
mdb-dump   -- simple hex dump utility for looking at mdb files
mdb-schema -- prints DDL for the specified table
mdb-export -- export table to CSV format
mdb-tables -- a simple dump of table names to be used with shell scripts
mdb-header -- generates a C header to be used in exporting mdb data to a C prog
mdb-parsecvs -- generates a C program given a CSV file made with mdb-export
mdb-sql -- demo SQL engine program
mdb-ver -- print version of database
</p>
-Des:
##----------------------------------------
=Pkg: mdbtools-odbc 0.6pre1 16.2.4 x86_64
=Sum: MDB Tools ODBC driver for unixODBC
+Des:
<!-- DT:Rich -->
<p>Mdbtools contains:
mdb-dump   -- simple hex dump utility for looking at mdb files
mdb-schema -- prints DDL for the specified table
mdb-export -- export table to CSV format
mdb-tables -- a simple dump of table names to be used with shell scripts
mdb-header -- generates a C header to be used in exporting mdb data to a C prog
mdb-parsecvs -- generates a C program given a CSV file made with mdb-export
mdb-sql -- demo SQL engine program
mdb-ver -- print version of database
</p>
-Des:
##----------------------------------------
=Pkg: meanwhile 1.0.2 2.9 x86_64
=Sum: Lotus Sametime Community Client Library
+Des:
<!-- DT:Rich -->
<p>Library to establish instant messaging connections to the Lotus Sametime IM server.
</p>
-Des:
##----------------------------------------
=Pkg: meanwhile-devel 1.0.2 2.9 x86_64
=Sum: Lotus Sametime Community Client library
+Des:
<!-- DT:Rich -->
<p>Library to establish instant messaging connections to the Lotus Sametime IM server.
</p>
-Des:
##----------------------------------------
=Pkg: memcached 1.2.6 5.16.1 x86_64
=Sum: A high-performance, distributed memory object caching system
+Des:
<!-- DT:Rich -->
<p>Memcached is a high-performance, distributed memory object caching system,
generic in nature, but intended for use in speeding up dynamic web applications
by alleviating database load.
</p><p>
Danga Interactive developed memcached to enhance the speed of LiveJournal.com,
a site which was already doing 20 million+ dynamic page views per day
for 1 million users with a bunch of webservers and a bunch of database servers.
memcached dropped the database load to almost nothing, yielding faster page
load times for users, better resource utilization, and faster access to the
databases on a memcache miss.
</p>
-Des:
##----------------------------------------
=Pkg: memtest86+ 4.00 1.2.21 x86_64
=Sum: Memory Testing Image for x86 Architecture
+Des:
<!-- DT:Rich -->
<p>Memtest86 est une image sur laquelle il est possible de démarrer à la place de l&#39;OS réel.
Une fois démarré, il peut être utilisé pour tester la mémoire de l&#39;ordinateur.
</p>
-Des:
##----------------------------------------
=Pkg: mercurial 1.0.2 27.32 x86_64
=Sum: Scalable Distributed SCM
+Des:
<!-- DT:Rich -->
<p>Mercurial is a fast, lightweight source control management system designed for efficient handling of very large distributed projects.
</p>
-Des:
##----------------------------------------
=Pkg: metacity-devel 2.28.1 0.3.36 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: mhash-devel 0.9.9 26.21 x86_64
=Sum: Static Library and Header Files for mhash Library
+Des:
<!-- DT:Rich -->
<p>The mhash library provides an easy way to access strong hashes
such as MD5, SHA1, and other algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: misc-console-font 3.5.10 20.31 x86_64
=Sum: A font for terminal usage
+Des:
<!-- DT:Rich -->
<p>This package contains the Misc Console font as shipped with KDE.
</p>
-Des:
##----------------------------------------
=Pkg: mjpegtools 1.9.0rc3 1.33 x86_64
=Sum: Outils de capture et de traitement video MJPEG
+Des:
<!-- DT:Rich -->
<p>The mjpegtools allow for capture, playback, processing, and simple editing of
MJPEG AV data. The hardware I/O applications are intended for use with Zoran MJPEG framegrabber-based hardware (see the zoran-driver package), but the processing tools can be used with MJPEG data from other sources as well.
</p>
-Des:
##----------------------------------------
=Pkg: mjpegtools-devel 1.9.0rc3 1.33 x86_64
=Sum: Outils de capture et de traitement video MJPEG
+Des:
<!-- DT:Rich -->
<p>The mjpegtools allow for capture, playback, processing, and simple editing of
MJPEG AV data. The hardware I/O applications are intended for use with Zoran MJPEG framegrabber-based hardware (see the zoran-driver package), but the processing tools can be used with MJPEG data from other sources as well.
</p>
-Des:
##----------------------------------------
=Pkg: mlterm-uim 2.9.3.20071112 134.41 x86_64
=Sum: An uim plugin for mlterm
+Des:
<!-- DT:Rich -->
<p>A plugin to use the uim input methods directly from mlterm.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-firebird 2.0.1 1.19.1 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to
develop an open source, Unix version of the .NET development platform.
Its objective is to enable Unix developers to build and deploy
cross-platform .NET applications. The project will implement various
technologies that have been submitted to the ECMA for standardization.
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-oracle 2.0.1 1.19.1 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-data-sybase 2.0.1 1.19.1 x86_64
=Sum: Database connectivity for Mono
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
</p><p>
Database connectivity for Mono.
</p>
-Des:
##----------------------------------------
=Pkg: mono-debugger 2.0 13.16 x86_64
=Sum: Mono Debugger
+Des:
<!-- DT:Rich -->
<p>A debugger is an important tool for development. The Mono Debugger (MDB) can debug both managed and unmanaged applications.  It provides a reusable library that can be used to add debugger functionality to different front-ends. The debugger package includes a console debugger named &quot;mdb&quot;, and MonoDevelop (http://www.monodevelop.com) provides a GUI interface to the debugger.
</p>
-Des:
##----------------------------------------
=Pkg: mono-devel 2.0.1 1.19.1 x86_64
=Sum: Mono development tools
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications.
This package contains compilers and other tools needed to develop .NET applications.
</p><p>
Mono development tools.
</p>
-Des:
##----------------------------------------
=Pkg: mono-extras 2.0.1 1.19.1 x86_64
=Sum: Paquets supplémentaires
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p><p>
Extra packages.
</p>
-Des:
##----------------------------------------
=Pkg: mono-jscript 2.0.1 1.19.1 x86_64
=Sum: JScript .NET support for Mono
+Des:
<!-- DT:Rich -->
<p>This package contains the JScript .NET compiler and language
runtime. This allows you to compile and run JScript.NET application
and assemblies.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr-devel 4.8.2 1.1.1 x86_64
=Sum: Netscape Portable Runtime development files
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss-devel 3.12.6 3.1.1 x86_64
=Sum: Network (Netscape) Security Services development files
+Des:
<!-- DT:Rich -->
<p>Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled server applications. Applications built with NSS can support SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certificates, and other security standards.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner190-devel 1.9.0.19 0.1.1 x86_64
=Sum: XULRunner/Gecko SDK 1.9
+Des:
<!-- DT:Rich -->
<p>Software Development Kit to embed XUL or Gecko into other applications.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner190-gnomevfs-32bit 1.9.0.19 0.1.1 x86_64
=Sum: XULRunner components depending on gnome-vfs
+Des:
<!-- DT:Rich -->
<p>This subpackage contains the Necko Gnome-VFS and Gnome components which
rely on the gnome-vfs subsystem to be installed.
They are recommended for full desktop integration but not mandatory for
small disk footprint KDE installations for example.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner190-translations-32bit 1.9.0.19 0.1.1 x86_64
=Sum: Translations for XULRunner 1.9
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p><p>
This package contains all supported languages but en-US which is
delivered in the main package.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner191-devel 1.9.1.9 1.12.1 x86_64
=Sum: XULRunner/Gecko SDK 1.9.1
+Des:
<!-- DT:Rich -->
<p>Software Development Kit to embed XUL or Gecko into other applications.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner191-gnomevfs-32bit 1.9.1.9 1.12.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.1
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner191-translations-32bit 1.9.1.9 1.12.1 x86_64
=Sum: Mozilla Runtime Environment 1.9.1
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mpc-devel 0.8 0.1.49 x86_64
=Sum: MPC multiple-precision complex library development files
+Des:
<!-- DT:Rich -->
<p>MPC multiple-precision complex library development files.
</p>
-Des:
##----------------------------------------
=Pkg: mpfr-devel 2.3.2 3.115 x86_64
=Sum: MPFR multiple-precision floating-point library development files
+Des:
<!-- DT:Rich -->
<p>MPFR multiple-precision floating-point library development files
</p>
-Des:
##----------------------------------------
=Pkg: mpfr-devel-32bit 2.3.2 3.115 x86_64
=Sum: MPFR multiple-precision floating-point library development files
+Des:
<!-- DT:Rich -->
<p>MPFR multiple-precision floating-point library development files
</p>
-Des:
##----------------------------------------
=Pkg: mpi-selector 1.0.3 0.1.43 x86_64
=Sum: Tool to provide defaults for which MPI implementation to use
+Des:
<!-- DT:Rich -->
<p>A simple tool that allows system administrators to set a site-wide
default for which MPI implementation is to be used, but also allow
users to set their own defaults MPI implementation, thereby overriding
the site-wide default.
</p><p>
The default can be changed easily via the mpi-selector command --
editing of shell startup files is not required.
</p>
-Des:
##----------------------------------------
=Pkg: mpich 1.2.7p1 126.25 x86_64
=Sum: Une implémentation portable de MPI
+Des:
<!-- DT:Rich -->
<p>MPICH is a freely available, portable implementation of MPI, the standard for message-passing libraries.
</p>
-Des:
##----------------------------------------
=Pkg: mpich-devel 1.2.7p1 126.25 x86_64
=Sum: Une implémentation portable de MPI
+Des:
<!-- DT:Rich -->
<p>MPICH is a freely available, portable implementation of MPI, the Standard for message-passing libraries.
This package contains manpages, headers and libraries needed for developing MPI applications
</p>
-Des:
##----------------------------------------
=Pkg: mpitests 3.1 5.15 x86_64
=Sum: MPI Benchmarks and tests
+Des:
<!-- DT:Rich -->
<p>Set of popular MPI benchmarks:
IMB-2.3
Presta-1.4.0
OSU benchmarks ver 2.2
</p>
-Des:
##----------------------------------------
=Pkg: mpitests-mvapich 3.1 5.17 x86_64
=Sum: MPI Benchmarks and tests for mvapich
+Des:
<!-- DT:Rich -->
<p>MPI Benchmarks and tests for mvapich.
</p>
-Des:
##----------------------------------------
=Pkg: mpitests-mvapich2 3.1 5.16 x86_64
=Sum: MPI Benchmarks and tests for mvapich2
+Des:
<!-- DT:Rich -->
<p>MPI Benchmarks and tests for mvapich2.
</p>
-Des:
##----------------------------------------
=Pkg: mtx 1.3.11 48.22 x86_64
=Sum: A Program for Controlling the Robotic Mechanism in DDS Auto Loaders
+Des:
<!-- DT:Rich -->
<p>A program for controlling the robotic mechanism in DDS auto loaders.
</p>
-Des:
##----------------------------------------
=Pkg: mvapich 1.1.0_3143 1.19 x86_64
=Sum: MPI implementation over Infiniband RDMA-enabled interconnect
+Des:
<!-- DT:Rich -->
<p>This is high performance and scalable MPI-1 implementation over Infiniband and RDMA-enabled interconnect.
This implementation is based on  MPICH and MVICH. MVAPICH is pronounced as `em-vah-pich&#39;&#39;.
</p>
-Des:
##----------------------------------------
=Pkg: mvapich-devel 1.1.0_3143 1.19 x86_64
=Sum: MPI implementation over Infiniband RDMA-enabled interconnect
+Des:
<!-- DT:Rich -->
<p>This is high performance and scalable MPI-1 implementation over Infiniband and RDMA-enabled interconnect.
This implementation is based on  MPICH and MVICH. MVAPICH is pronounced as `em-vah-pich&#39;&#39;.
</p>
-Des:
##----------------------------------------
=Pkg: mvapich2 1.2p1 1.19 x86_64
=Sum: OSU MVAPICH2 MPI package
+Des:
<!-- DT:Rich -->
<p>This is an MPI-2 implementation which includes all MPI-1 features.  It is
based on MPICH2 and MVICH.
</p>
-Des:
##----------------------------------------
=Pkg: mvapich2-devel 1.2p1 1.19 x86_64
=Sum: OSU MVAPICH2 MPI package
+Des:
<!-- DT:Rich -->
<p>This is an MPI-2 implementation which includes all MPI-1 features.  It is
based on MPICH2 and MVICH.
</p>
-Des:
##----------------------------------------
=Pkg: mxml 2.5 23.22 x86_64
=Sum: Small XML Parsing Library
+Des:
<!-- DT:Rich -->
<p>Mini-XML is a small XML parsing library that you can use to
read XML and XML-like data files in your application without
requiring large nonstandard libraries.
</p><p>
This package holds the commandline tools for mxml.
</p>
-Des:
##----------------------------------------
=Pkg: nagios 3.0.6 1.21.1 x86_64
=Sum: The Nagios Network Monitor
+Des:
<!-- DT:Rich -->
<p>Nagios is a program that will monitor hosts and services on your
network. It has the ability to email or page you when a problem arises
and when a problem is resolved. Nagios is written in C and is
designed to run under Linux (and some other *NIX variants) as a
background process, intermittently running checks on various services
that you specify.
</p><p>
The actual service checks are performed by separate &quot;plugin&quot; programs
which return the status of the checks to Nagios. The plugins are
available at http://sourceforge.net/projects/nagiosplug
</p><p>
This package provide core programs for nagios. The web interface,
documentation, and development files are built as separate packages
</p>
-Des:
##----------------------------------------
=Pkg: nagios-devel 3.0.6 1.21.1 x86_64
=Sum: Development files for nagios
+Des:
<!-- DT:Rich -->
<p>Nagios is a program that will monitor hosts and services on your
network. It has the ability to email or page you when a problem arises
and when a problem is resolved. Nagios is written in C and is
designed to run under Linux (and some other *NIX variants) as a
background process, intermittently running checks on various services
that you specify.
</p><p>
This package provides include files that Nagios-related applications
may compile against.
</p>
-Des:
##----------------------------------------
=Pkg: nagios-www 3.0.6 1.21.1 x86_64
=Sum: Provides the HTML and CGI files for the Nagios web interface
+Des:
<!-- DT:Rich -->
<p>Nagios is a program that will monitor hosts and services on your
network. It has the ability to email or page you when a problem arises
and when a problem is resolved. Nagios is written in C and is
designed to run under Linux (and some other *NIX variants) as a
background process, intermittently running checks on various services
that you specify.
</p><p>
Several CGI programs are included with Nagios in order to allow you
to view the current service status, problem history, notification
history, and log file via the web. This package provides the HTML and
CGI files for the Nagios web interface. In addition, HTML
documentation is included in this package.
</p>
-Des:
##----------------------------------------
=Pkg: nasm 2.03.90 1.16 x86_64
=Sum: Netwide Assembler (An x86 Assembler)
+Des:
<!-- DT:Rich -->
<p>NASM is a prototype general-purpose x86 assembler. It can currently output
several binary formats, including ELF, a.out, Win32, and OS/2.
</p><p>
Read the licence agreement in /usr/share/doc/packages/nasm/Licence.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner-devel 2.25.3 3.1.179 x86_64
=Sum: CD-Burning Extension for Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner is an extension to Nautilus that makes it easy to
write files to a CD burner.
</p><p>
The user uses Nautilus or another Gnome-VFS aware application to copy the
files he wants to write to &quot;burn:///,&quot; and then Nautilus-cd-burner is
launched to write the files to the CD.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-devel 2.28.4 1.6.8 x86_64
=Sum: Development Package for Nautilus
+Des:
<!-- DT:Rich -->
<p>This package contains all files needed to develop programs that use features of the Nautilus file manager.
</p>
-Des:
##----------------------------------------
=Pkg: ncpfs 2.2.6 147.17.1 x86_64
=Sum: Tools for Accessing Novell File Systems
+Des:
<!-- DT:Rich -->
<p>With this program, you can mount Netware server file systems under Linux.
You can even print Linux documents on printers attached to a
Novell server.
</p>
-Des:
##----------------------------------------
=Pkg: ncpfs-devel 2.2.6 147.17.1 x86_64
=Sum: Tools for Accessing Novell Filesystems
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries and header files to link against libncp.
</p><p>
You can mount Netware-server filesystems under Linux using this little
tool. You can even print Linux documents on printers attached to the
Novell server.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses-devel-32bit 5.6 90.55 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses-devel 5.6 90.55 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: net-snmp-devel 5.4.2.1 8.2.1 x86_64
=Sum: SNMP Daemon
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p>
-Des:
##----------------------------------------
=Pkg: netatalk 2.0.3 249.14 x86_64
=Sum: AppleTalk for Linux
+Des:
<!-- DT:Rich -->
<p>Netatalk is an implementation of the AppleTalk Protocol Suite for Unix and Linux systems.
The current release contains support for Ethertalk phase I and II, DDP, RTMP, NBP, ZIP, AEP, ATP, PAP, ASP, and AFP.
It provides AppleTalk file printing and routing services on Solaris 2.5, Linux, FreeBSD, SunOS 4.1, and Ultrix 4. It also supports AFP 2.1 and 2.2 (AppleShare IP).
</p>
-Des:
##----------------------------------------
=Pkg: netatalk-devel 2.0.3 249.14 x86_64
=Sum: Appletalk for Linux
+Des:
<!-- DT:Rich -->
<p>netatalk is an implementation of the AppleTalk Protocol Suite for UNIX and Linux systems.
The current release contains support for Ethertalk Phase I and II, DDP, RTMP, NBP, ZIP, AEP, ATP, PAP, ASP, and AFP.
It provides Appletalk file printing and routing services on Solaris 2.5, Linux, FreeBSD, SunOS 4.1, and Ultrix 4. It also supports AFP 2.1 and 2.2 (Appleshare IP).
</p>
-Des:
##----------------------------------------
=Pkg: newt 0.52.10 1.32.1 x86_64
=Sum: Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>Newt is a programming library for color text-mode, widget-based user interfaces.  Newt can be used to add stacked windows, entry widgets, checkboxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces.
</p><p>
This package also contains a Dialog replacement called whiptail. Newt is based on the slang library.
</p>
-Des:
##----------------------------------------
=Pkg: newt-devel 0.52.10 1.32.1 x86_64
=Sum: Development files for the Newt windowing toolkit
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries necessary for developing applications which use newt.
</p><p>
Newt is a development library for text mode user interfaces.
</p><p>
Install newt-devel if you want to develop applications which depend on newt.
</p>
-Des:
##----------------------------------------
=Pkg: newt-static 0.52.10 1.32.1 x86_64
=Sum: Static libraries of Nifty Erik's Windowing Toolkit
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries needed to compile programs based on newt which don&#39;t need the shared libraries. Install it if you need to link statically with libnewt.
</p><p>
Newt is a programming library for color text-mode widget-based user interfaces.  Newt can be used to add stacked windows, entry widgets, check boxes, radio buttons, labels, plain text fields, scrollbars, etc., to text mode user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: nfsidmap-devel 0.20 1.20 x86_64
=Sum: NFSv4 ID Mapping Library development libraries
+Des:
<!-- DT:Rich -->
<p>In NFSv4, identities of users are conveyed by names rather than user ID
and group ID. Both the NFS server and client code in the kernel need to
translate these to numeric IDs.
</p>
-Des:
##----------------------------------------
=Pkg: nkf 2.0.5 36.8 x86_64
=Sum: Network Kanji Code Conversion Filter
+Des:
<!-- DT:Rich -->
<p>Nkf is a yet another Kanji code converter among networks, hosts, and
terminals. It converts input Kanji code to designated Kanji code, such
as 7-bit JIS, MS-kanji (shifted-JIS) or EUC.
</p><p>
One of the most unique facility of nkf is the guess of
the input kanji code.  It currently recognizes 7-bit JIS,
MS-kanji (shifted-JIS), and  EUC. So users do not need the
input Kanji code specification.
</p><p>
By  default,  X0201  kana is converted into X0208 kana. For
X0201 kana, SO/SI, SSO and ESC-(-I methods are  supported.
For automatic code detection, nkf assumes no X0201 kana in
MS-Kanji. To accept X0201 in MS-Kanji, use -X, -x, or -S.
</p>
-Des:
##----------------------------------------
=Pkg: nmh 1.3 1.19 x86_64
=Sum: Unix Mail Handler
+Des:
<!-- DT:Rich -->
<p>nmh (new MH) is a powerful electronic mail handling system. It was originally
based on version 6.8.3 of the MH message system developed by the RAND Corporation
and the University of California. It is intended to be a (mostly) compatible
drop-in replacement for MH.
</p><p>
nmh consists of a collection of fairly simple single-purpose programs to send,
receive, save, retrieve, and manipulate e-mail messages. Because nmh is a suite
rather than a single monolithic program, you may freely intersperse nmh commands
with other commands at your shell prompt or write custom scripts that use these
commands in flexible ways.
</p>
-Des:
##----------------------------------------
=Pkg: notify-sharp 0.4.0 115.40 x86_64
=Sum: notify-sharp is a C# client implementation for Desktop Notifications
+Des:
<!-- DT:Rich -->
<p>notify-sharp is a C# client implementation for Desktop Notifications,
i.e. notification-daemon. It is inspired by the libnotify API.
</p><p>
Desktop Notifications provide a standard way of doing passive pop-up
notifications on the Linux desktop. These are designed to notify the
user of something without interrupting their work with a dialog box
that they must close. Passive popups can automatically disappear after
a short period of time.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ipsec-tools 0.7.1 2.29.1 x86_64
=Sum: IPsec Utilities with turnpike plugin enabled
+Des:
<!-- DT:Rich -->
<p>This is the patched IPsec-Tools package, that contains patches for the plugin framework to make vendor plugins make use of these tools to provide IPSec based solutions like VPN client.
</p><p>
This package is needed to make use of the IPsec functionality in the version 2.5 and 2.6 Linux kernels. This package builds:
<ul>
<li>libipsec, a PFKeyV2 library
</li><li>setkey, a program to directly manipulate policies and SAs
</li><li>racoon, an IKEv1 keying daemon
</li></ul>
These sources can be found at the IPsec-Tools home page at: http://ipsec-tools.sourceforge.net/
</p><p>
The source and details about the framework can be found at
http://forge.novell.com/modules/xfmod/project/?turnpike
</p><p>
novell-ipsec-tools is a preview package to be used along with the Novell VPN client. This package will be merged with the main stream ipsec-tools in future.
</p>
-Des:
##----------------------------------------
=Pkg: novell-ipsec-tools-devel 0.7.1 2.29.1 x86_64
=Sum: IPsec Utilities with turnpike plugin enabled
+Des:
<!-- DT:Rich -->
<p>This is the IPsec-Tools package. This package is needed to really make use of the IPsec functionality in the version 2.5 and 2.6 Linux kernels. This package builds:
<ul>
<li>libipsec, a PFKeyV2 library
</li><li>setkey, a program to directly manipulate policies and SAs
</li><li>racoon, an IKEv1 keying daemon
</li></ul>
These sources can be found at the IPsec-Tools home page at: http://ipsec-tools.sourceforge.net/
</p><p>
This package additionally contain the plugin framework to make vendor plugins make use of these tools to provide IPSec based solutions like VPN client.
</p><p>
The source and details about the framework can be found at
http://forge.novell.com/modules/xfmod/project/?turnpike
</p>
-Des:
##----------------------------------------
=Pkg: nss-shared-helper-devel 1.0.6 1.6 x86_64
=Sum: Development libraries for nss-shared-helper
+Des:
<!-- DT:Rich -->
<p>Header and library files for helpers meant to enable sharing of NSS
crypto database.
</p>
-Des:
##----------------------------------------
=Pkg: ntfs-3g 1.5012 2.14 x86_64
=Sum: Linux NTFS-3G userspace filesystem with full write support
+Des:
<!-- DT:Rich -->
<p>NTFS-3G allows for read/write access to NTFS partitions which can be shared with Windows XP, Windows Server 2003, Windows 2000 and Windows Vista.
</p><p>
Limitations:
<ul>
<li>No support for journaling. As a result, if the journal is dirty, NTFS-3g has to refuse read-write mounts.
</li><li>No support for reading/writing compressed and encrypted files
</li><li>Only static permissions, set at mount time
</li></ul>
Notes:
<ul>
<li>Implemented in user space though <a href="pkg://fuse">fuse</a>. It is possible to balance performance using normal processor and I/O priorities of the ntfs-3g processes.
</li><li>NTFS-3g can detect if the filesystem to be mounted has been in use by Windows when it hibernated and refuses read-write mount to prevent data corruption as a result of Windows resuming with a changed filesystem underneath.
</li></ul>
Evaluating access permissions and file ownership is handled like in the Linux FAT and other free Linux NTFS drivers: The access rights for all files on the mounted partition can be set when mounting the filesystem and are the same for all files. Requests to change access rights are silently ignored.
</p><p>
Through the ntfs-3g web site, a version of ntfs-3g with permission handling (which should be usable but is not released officially) can be found.
</p><p>
Compared to vanilla ntfs-3g, this version changes the default locale fallback
(when no working locale is defined) from hiding and rejecting all non-ASCII path names to displaying and expecting UTF-8 encoding in path names.
</p>
-Des:
##----------------------------------------
=Pkg: ntfs-3g-devel 1.5012 2.14 x86_64
=Sum: Development files and libraries for ntfs-3g
+Des:
<!-- DT:Rich -->
<p>Headers and libraries for developing applications that use ntfs-3g
functionality.
</p>
-Des:
##----------------------------------------
=Pkg: ntfsprogs 1.13.1 76.15 x86_64
=Sum: NTFS filesystem libraries and utilities
+Des:
<!-- DT:Rich -->
<p>The Linux-NTFS project (http://linux-ntfs.sf.net/) aims to bring full support
for the NTFS filesystem to the Linux operating system.  The ntfsprogs package
currently consists of a static library and utilities such as mkntfs, ntfscat,
ntfsls, ntfsresize, and ntfsundelete (for a full list of included utilities
see man 8 ntfsprogs after installation).
</p>
-Des:
##----------------------------------------
=Pkg: ntfsprogs-devel 1.13.1 76.15 x86_64
=Sum: Development package for using libntfs from other programs
+Des:
<!-- DT:Rich -->
<p>This package includes the header files and libraries needed to link software
with the NTFS library (libntfs).
</p>
-Des:
##----------------------------------------
=Pkg: nut 2.2.2 69.11 x86_64
=Sum: Network UPS Tools Core (Unbreakable Power Supply Monitoring)
+Des:
<!-- DT:Rich -->
<p>Core package of Network UPS Tools.
</p><p>
Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware.
</p><p>
Detailed information about supported hardware can be found in
/usr/share/doc/packages/nut.
</p>
-Des:
##----------------------------------------
=Pkg: nut-cgi 2.2.2 69.11 x86_64
=Sum: Network UPS Tools Web Server Support (UPS Status Pages)
+Des:
<!-- DT:Rich -->
<p>Web server support package for the Network UPS Tools.
</p><p>
Predefined URL is http://localhost/nut/index.html
</p><p>
Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware.
</p><p>
Detailed information about supported hardware can be found in
/usr/share/doc/packages/nut.
</p>
-Des:
##----------------------------------------
=Pkg: nut-classic 2.2.2 69.11 x86_64
=Sum: Network UPS Tools Classic Package (Monitoring Server)
+Des:
<!-- DT:Rich -->
<p>Classic package of Network UPS Tools.
</p><p>
Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware.
</p><p>
This is the standard installation that uses a layered approach to connect all of the NUT parts.
</p><p>
Drivers are provided for a wide assortment of equipment.  They understand the specific language of each UPS and map it back to a compatibility layer.  This means both an expensive &quot;smart&quot; protocol UPS and a simple &quot;power strip&quot; model can be handled transparently.
</p><p>
This information is cached by the network server upsd, which then answers queries from the clients.  upsd contains a number of access control features to limit the abilities of the clients.  Only authorized hosts may monitor or control your UPS hardware if you wish.  Since the notion of monitoring over the network is built into the software, you can hang many systems off one large UPS and they will all shut down together.
</p><p>
Clients such as upsmon check on the status of the hardware and do things when necessary.  The most important task is shutting down the operating system cleanly before the UPS runs out of power.  Other programs are also provided to log UPS status regularly, monitor status through your web browser, and more.
</p><p>
Detailed information about supported hardware can be found in
/usr/share/doc/packages/nut.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Edit the variables in /etc/sysconfig/smartups
or edit the files below /etc/ups and
read /usr/share/doc/packages/nut/README.SuSE.
</p>
-Ins:
##----------------------------------------
=Pkg: nut-devel 2.2.2 69.11 x86_64
=Sum: Network UPS Tools (Unbreakable Power Supply Monitoring)
+Des:
<!-- DT:Rich -->
<p>Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS hardware.
</p><p>
Detailed information about supported hardware can be found in
/usr/share/doc/packages/nut.
</p>
-Des:
##----------------------------------------
=Pkg: obex-data-server 0.4.1 1.21 x86_64
=Sum: API Obex DBus
+Des:
<!-- DT:Rich -->
<p>Obex-Data-Server fournit une API pour obex dbus.
Il est utilisé par les applications bluetooth pour échanger des données.
</p>
-Des:
##----------------------------------------
=Pkg: obs-api 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- The Frontend part
+Des:
<!-- DT:Rich -->
<p>This is the frontend component (API) for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-common 1.7.0 0.2.26 x86_64
=Sum: The openSUSE Build Service -- Common Components
+Des:
<!-- DT:Rich -->
<p>Authors:
<hr>
The openSUSE Team &lt;opensuse-buildservice@opensuse.org&gt;
</p>
-Des:
##----------------------------------------
=Pkg: obs-productconverter 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- Server Component
+Des:
<!-- DT:Rich -->
<p>This is the server component for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-server 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- Server Component
+Des:
<!-- DT:Rich -->
<p>This is the server component for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-signd 1.7.0 0.1.38 x86_64
=Sum: The openSUSE Build Service -- Server Component
+Des:
<!-- DT:Rich -->
<p>This is the server component for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-source_service 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- The Frontend part
+Des:
<!-- DT:Rich -->
<p>This is the frontend component (API) for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-utils 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- Build Host Component
+Des:
<!-- DT:Rich -->
<p>This is the build host component for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: obs-worker 1.7.2 0.2.32 x86_64
=Sum: The openSUSE Build Service -- Build Host Component
+Des:
<!-- DT:Rich -->
<p>This is the build host component for the openSUSE Build Service.
</p>
-Des:
##----------------------------------------
=Pkg: ocaml 3.10.2 36.29 x86_64
=Sum: The Objective Caml Compiler and Programming Environment
+Des:
<!-- DT:Rich -->
<p>Objective Caml is un langage de programmation haut niveau, fortement
typé, fonctionnel et orienté objet, qui appartient à la famille des langages ML.
</p><p>
Ce paquet comprend deux compilateurs par lot (un compilateur bytecode
rapide, et un compilateur optimisé pour du code natif), un système 
haut niveau interactif, les outils Lex&amp;Yacc, un debogueur et une 
bibliothèque compréhensible.
</p>
-Des:
##----------------------------------------
=Pkg: ocaml-facile 1.1 2.16 x86_64
=Sum: Bibliothèque de programmation par contrainte OCaml
+Des:
<!-- DT:Rich -->
<p>FaCiLe is a constraint programming library on integer and integer set finite domains written in OCaml.
It offers all usual facilities to create and manipulate finite domain variables, arithmetic expressions and constraints (possibly non-linear), built-in global
constraints (difference, cardinality, sorting etc.) and search and optimization goals.
FaCiLe as well allows you to build easily user-defined constraints and goals (including recursive ones), making pervasive use of OCaml higher-order functionals to provide a simple and flexible interface for the user.
As FaCiLe is an OCaml library and not &quot;yet another language&quot;, the user benefits from type inference and strong typing discipline, high level of abstraction, a modules and objects system, as well as native code compilation efficiency, garbage collection and replay debugger, all features of OCaml (among many others) that allow to prototype and experiment quickly: modeling, data processing and interface are implemented with the same powerful and efficient language.
</p>
-Des:
##----------------------------------------
=Pkg: ofed-devel 1.4.2 0.9.6 x86_64
=Sum: Infiniband Kernel Modules
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les modules noyau infiniband conçus par OpenFabrics Enterprise Distribution (OFED)
</p>
-Des:
##----------------------------------------
=Pkg: okular-devel 4.3.5 0.1.74 x86_64
=Sum: Visionneuse de documents - Fichiers de développement
+Des:
<!-- DT:Rich -->
<p>Visionneuse de documents, supporte divers formats
</p>
-Des:
##----------------------------------------
=Pkg: opal 3.4.2 2.33 x86_64
=Sum: Open Phone Abstraction Library
+Des:
<!-- DT:Rich -->
<p>Open Phone Abstraction Library implémente le protocole de télé-
conférence ITU H.323, et les successeurs de la bibliothèque openh323.
H.323, SIP et IAX2 sont supportés.
</p>
-Des:
##----------------------------------------
=Pkg: opal-devel 3.4.2 2.33 x86_64
=Sum: Paquetages de développement pour opal
+Des:
<!-- DT:Rich -->
<p>Bibliothèques statiques et fichiers d&#39;en-tête pour le développement
avec Open Audio Library
</p>
-Des:
##----------------------------------------
=Pkg: openCryptoki 2.3.0 0.7.21 x86_64
=Sum: An Implementation of PKCS#11 (Cryptoki) v2.11 for IBM Cryptographic Hardware
+Des:
<!-- DT:Rich -->
<p>The PKCS#11 version 2.11 API implemented for the IBM cryptographic cards.
This package includes support for the IBM 4758 cryptographic
coprocessor (with the PKCS#11 firmware loaded) and the IBM eServer
Cryptographic Accelerator (FC 4960 on pSeries).
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Configure the card as described in the documentation. Then add pkcsslotd to the services to start at boot with the YaST runlevel editor.
</p>
-Ins:
##----------------------------------------
=Pkg: openCryptoki-devel 2.3.0 0.7.21 x86_64
=Sum: An Implementation of PKCS#11 (Cryptoki) v2.01 for IBM Cryptographic Hardware
+Des:
<!-- DT:Rich -->
<p>The PKCS#11 version 2.01 API implemented for the IBM cryptographic cards.
This package includes support for the IBM 4758 cryptographic
co-processor (with the PKCS#11 firmware loaded) and the IBM eServer
Cryptographic Accelerator (FC 4960 on pSeries).
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please configure the card as described in the documentation, then add pkcsslotd to the services to be started at boot with the YaST runlevel editor.
</p>
-Ins:
##----------------------------------------
=Pkg: openchange 0.9 0.2.37 x86_64
=Sum: Open Source Exchange Server Alternative Native Outlook Compatibility
+Des:
<!-- DT:Rich -->
<p>OpenChange aims to provide a portable Open Source implementation of Microsoft Exchange Server and Exchange protocols. Exchange is a groupware server designed to work with Microsoft Outlook, and providing features such as a messaging server, shared calendars, contact databases, public folders, notes and tasks.
</p><p>
OpenChange provides the MAPI library which can be used by third party messaging clients such as GNOME Evolution or Mozilla Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: openchange-devel 0.9 0.2.37 x86_64
=Sum: Open Source Exchange Server Alternative Native Outlook Compatibility
+Des:
<!-- DT:Rich -->
<p>OpenChange aims to provide a portable Open Source implementation of Microsoft Exchange Server and Exchange protocols. Exchange is a groupware server designed to work with Microsoft Outlook, and providing features such as a messaging server, shared calendars, contact databases, public folders, notes and tasks.
</p><p>
OpenChange provides the MAPI library which can be used by third party messaging clients such as GNOME Evolution or Mozilla Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: openct-devel 0.6.15 5.20 x86_64
=Sum: OpenCT Library for Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. OpenCT is used by the OpenSC Smart Card library.
</p><p>
For a list of supported readers, please read documentation in /usr/share/doc/packages/openct/wiki/index.html - some readers may be supported only with particular firmware or particular connection type.
</p><p>
There are other packages that may support your reader in a different way. Name of all these packages starts with &quot;pcsc-&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: openhpi 2.12.0 1.31 x86_64
=Sum: Implementation of SA Forum's Hardware Platform Interface (HPI)
+Des:
<!-- DT:Rich -->
<p>OpenHPI is an open source project created with the intent of providing an implementation of the SA Forum&#39;s Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. HPI includes a resource modeling; access to and control over sensor, control, watchdog, and inventory data associated with resources; abstracted System Event Log interfaces; hardware events and alerts; and a managed hotswap interface.
</p><p>
OpenHPI provides a modular mechanism for adding new hardware and device support easily. Many plug-ins exist in the OpenHPI source tree to provide access to various types of hardware. This includes, but is not limited to, IPMI based servers, Blade Center, and machines that export data via sysfs. For up-to-date status on these components, check out the status page.
</p>
-Des:
##----------------------------------------
=Pkg: openhpi-daemon 2.12.0 1.31 x86_64
=Sum: Implementation of SA Forum's Hardware Platform Interface (HPI)
+Des:
<!-- DT:Rich -->
<p>OpenHPI is an open source project created with the intent of providing an implementation of the SA Forum&#39;s Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. HPI includes a resource modeling; access to and control over sensor, control, watchdog, and inventory data associated with resources; abstracted System Event Log interfaces; hardware events and alerts; and a managed hotswap interface.
</p><p>
OpenHPI provides a modular mechanism for adding new hardware and device support easily. Many plugins exist in the OpenHPI source tree to provide access to various types of hardware. This includes, but is not limited to, IPMI based servers, Blade Center, and machines which export data via sysfs. For up-to-date status on these components, please check out the status page.
</p>
-Des:
##----------------------------------------
=Pkg: openhpi-devel 2.12.0 1.31 x86_64
=Sum: Development Files for HPI
+Des:
<!-- DT:Rich -->
<p>Contains additional files needed for a developer to create applications
and/or middleware that use the Service Availability Forum&#39;s
HPI specification
</p>
-Des:
##----------------------------------------
=Pkg: openjade 1.3.2 295.16 x86_64
=Sum: DSSSL Engine for SGML Documents
+Des:
<!-- DT:Rich -->
<p>OpenJade, the follow-up to Jade by James Clark, is an
implementation of the ISO/IEC 10179:1996 standard DSSSL (Document Style, Semantics, and Specification Language); pronounce it &quot;dissl&quot;--it rhymes with whistle.
</p><p>
It has back-ends for SGML, RTF, MIF, TeX, and HTML.
</p><p>
The parser, &quot;nsgmls,&quot; and helper tools like &quot;sgmlnorm,&quot; &quot;spam,&quot;
&quot;spent,&quot; and &quot;sx&quot; are now included in the separate &quot;opensp&quot; package.
</p>
-Des:
##----------------------------------------
=Pkg: openjade-devel 1.3.2 295.16 x86_64
=Sum: DSSSL Engine (development package)
+Des:
<!-- DT:Rich -->
<p>Libraries and includes to compile applications that use the OpenJade framework (package &#39;openjade&#39;).
</p>
-Des:
##----------------------------------------
=Pkg: openldap2 2.4.20 0.4.29 x86_64
=Sum: The OpenLDAP Server
+Des:
<!-- DT:Rich -->
<p>The Lightweight Directory Access Protocol (LDAP) is used to
access online directory services. It runs directly over TCP and
can be used to access a stand-alone LDAP directory service or to access
a directory service that has an X.500 back-end.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-devel 2.4.20 0.4.29 x86_64
=Sum: Libraries, Header Files and Documentation for OpenLDAP
+Des:
<!-- DT:Rich -->
<p>This package provides the OpenLDAP libraries, header files, and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-devel-32bit 2.4.20 0.4.29 x86_64
=Sum: Libraries, Header Files and Documentation for OpenLDAP
+Des:
<!-- DT:Rich -->
<p>This package provides the OpenLDAP libraries, header files, and documentation.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif 2.3.1 3.13 x86_64
=Sum: Open Motif
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif runtime environment.  It includes the Motif shared libraries.  Open Motif is a freely available version of the well known Motif user interface toolkit for Open Source operating systems.  This package was built with the Metro Link sources.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-devel 2.3.1 3.13 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif development environment.  It includes the Motif header files and static libraries, plus the Motif UIL (User Interface Language) compiler and the manual pages for the Motif widgets and library functions.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-devel-32bit 2.3.1 3.13 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif development environment.  It includes the Motif header files and static libraries, plus the Motif UIL (User Interface Language) compiler and the manual pages for the Motif widgets and library functions.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-libs 2.3.1 3.13 x86_64
=Sum: Open Motif Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif runtime environment.  It includes the Motif shared libraries.  Open Motif is a freely available version of the well known user interface toolkit Motif for Open Source operating systems.  This package was
built with the sources from Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openmotif-libs-32bit 2.3.1 3.13 x86_64
=Sum: Open Motif Runtime Libraries
+Des:
<!-- DT:Rich -->
<p>This is the Open Motif runtime environment.  It includes the Motif shared libraries.  Open Motif is a freely available version of the well known user interface toolkit Motif for Open Source operating systems.  This package was
built with the sources from Metro Link.
</p>
-Des:
##----------------------------------------
=Pkg: openmpi 1.3.2 0.2.42 x86_64
=Sum: A powerful implementaion of MPI
+Des:
<!-- DT:Rich -->
<p>Open MPI is a project combining technologies and resources from
several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in
order to build the best MPI library available.
</p><p>
This RPM contains all the tools necessary to compile, link, and run
Open MPI jobs.
</p>
-Des:
##----------------------------------------
=Pkg: openmpi-devel 1.3.2 0.2.42 x86_64
=Sum: A powerful implementaion of MPI
+Des:
<!-- DT:Rich -->
<p>Open MPI is a project combining technologies and resources from
several other projects (FT-MPI, LA-MPI, LAM/MPI, and PACX-MPI) in
order to build the best MPI library available.
</p><p>
This RPM contains all the tools necessary to compile, link, and run
Open MPI jobs.
</p>
-Des:
##----------------------------------------
=Pkg: openobex 1.3 157.21 x86_64
=Sum: Open Source Implementation of the Object Exchange (OBEX) Protocol
+Des:
<!-- DT:Rich -->
<p>OBEX is a session protocol and can best be described as a binary HTTP protocol. OBEX is optimized for ad-hoc wireless links and can be used to exchange all kind of objects, like files, pictures, calendar entries (vCal), and business cards (vCard).
</p>
-Des:
##----------------------------------------
=Pkg: openobex-devel 1.3 157.21 x86_64
=Sum: Development package for openobex
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using openobex.
</p>
-Des:
##----------------------------------------
=Pkg: openobex-glib-devel 1.3 157.21 x86_64
=Sum: Development package for openobex
+Des:
<!-- DT:Rich -->
<p>Files needed for software development using openobex.
</p>
-Des:
##----------------------------------------
=Pkg: opensc-devel 0.11.6 5.25.1 x86_64
=Sum: Additional files needed for OpenSC development
+Des:
<!-- DT:Rich -->
<p>This package contains files required to develop applications
using the OpenSC framework.
</p>
-Des:
##----------------------------------------
=Pkg: openslp-devel 1.2.0 172.11.16 x86_64
=Sum: OpenSLP Development SDK
+Des:
<!-- DT:Rich -->
<p>Service Location Protocol is an IETF standards track protocol that
provides a framework that allows networking applications to discover the
existence, location, and configuration of networked services in
enterprise networks.
</p><p>
This package contains header and library files to compile applications with
SLP support. It also contains developer documentation to develop such applications.
</p>
-Des:
##----------------------------------------
=Pkg: openslp-server 1.2.0 172.11.16 x86_64
=Sum: The OpenSLP Implementation of the  Service Location Protocol V2
+Des:
<!-- DT:Rich -->
<p>Service Location Protocol is an IETF standards track protocol that
provides a framework that allows networking applications to discover the
existence, location, and configuration of networked services in
enterprise networks.
</p><p>
This package contains the SLP server. Every system, which provides any services that should be used via an SLP client must run this server and register the service.
</p>
-Des:
##----------------------------------------
=Pkg: opensm 3.2.6_20090317 0.1.42 x86_64
=Sum: Infiniband Subnet Manager
+Des:
<!-- DT:Rich -->
<p>OpenSM provides an implementation for an InfiniBand Subnet Manager and
Administration. Such a software entity is required to run for in order
to initialize the InfiniBand hardware (at least one per each
InfiniBand subnet).
</p>
-Des:
##----------------------------------------
=Pkg: opensm-32bit 3.2.6_20090317 0.1.42 x86_64
=Sum: Infiniband Subnet Manager
+Des:
<!-- DT:Rich -->
<p>OpenSM provides an implementation for an InfiniBand Subnet Manager and
Administration. Such a software entity is required to run for in order
to initialize the InfiniBand hardware (at least one per each
InfiniBand subnet).
</p>
-Des:
##----------------------------------------
=Pkg: opensm-devel 3.2.6_20090317 0.1.42 x86_64
=Sum: Development files for OpenSM
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for OpenSM.
</p>
-Des:
##----------------------------------------
=Pkg: opensm-devel-32bit 3.2.6_20090317 0.1.42 x86_64
=Sum: Development files for OpenSM
+Des:
<!-- DT:Rich -->
<p>Static libraries and header files for OpenSM.
</p>
-Des:
##----------------------------------------
=Pkg: opensp 1.5.2 176.22 x86_64
=Sum: The OpenJade Group's SGML and XML Parsing Tools
+Des:
<!-- DT:Rich -->
<p>The tools in this package provide the ability to manage SGML and XML
documents.
</p><p>
This package contains the parser nsgmls and the related programs sgmlnorm, spcat,
spam, spent, and sgml2xml (previously known as sx).
Sgml2xml is useful as a tool for converting from
SGML to XML, the coming WWW standard.
</p><p>
This package is a fork from James Clark&#39;s SP suite.
</p>
-Des:
##----------------------------------------
=Pkg: opensp-devel 1.5.2 176.22 x86_64
=Sum: SGML parser tools (development package)
+Des:
<!-- DT:Rich -->
<p>Libraries and includes to compile applications that use the SGML parser tools (package &#39;opensp&#39;).
</p>
-Des:
##----------------------------------------
=Pkg: openwsman-python 2.2.3 0.6.5 x86_64
=Sum: Python bindings for openwsman client API
+Des:
<!-- DT:Rich -->
<p>This package provides Python bindings to access the openwsman client API.
</p>
-Des:
##----------------------------------------
=Pkg: opie 2.4 662.16 x86_64
=Sum: Support for One-Time Passwords
+Des:
<!-- DT:Rich -->
<p>OPIE stands for One-time Passwords In Everything. One-time passwords
can be used to foil password sniffers because they cannot be reused by
the attacker.
</p><p>
This package provides a PAM module and several utility programs that let
you use one-time passwords for authentication.
</p>
-Des:
##----------------------------------------
=Pkg: opie-32bit 2.4 662.16 x86_64
=Sum: Support for One-Time Passwords
+Des:
<!-- DT:Rich -->
<p>OPIE stands for One-time Passwords In Everything. One-time passwords
can be used to foil password sniffers because they cannot be reused by
the attacker.
</p><p>
This package provides a PAM module and several utility programs that let
you use one-time passwords for authentication.
</p>
-Des:
##----------------------------------------
=Pkg: oprofile 0.9.6 0.4.29 x86_64
=Sum: System-Wide Profiler for Linux Systems
+Des:
<!-- DT:Rich -->
<p>OProfile is a system-wide profiler for Linux systems, capable of profiling all running code at low overhead. OProfile is released under the GNU GPL.
</p><p>
It consists of a kernel module and a daemon for collecting sample data, and
several post-profiling tools for turning data into information.
</p><p>
OProfile leverages the CPU hardware performance counters to enable profiling of a wide variety of interesting statistics, which can also be used for basic time-spent profiling. All code is profiled: hardware and software interrupt handlers, kernel modules, the kernel, shared libraries, and applications (the only exception being the oprofile interrupt handler itself).
</p><p>
OProfile is currently in alpha status; however it has proven stable over a
large number of differing configurations. As always, there is no warranty.
</p><p>
This is the package containing the userspace tools.
</p>
-Des:
##----------------------------------------
=Pkg: oprofile-32bit 0.9.6 0.4.29 x86_64
=Sum: System-Wide Profiler for Linux Systems
+Des:
<!-- DT:Rich -->
<p>OProfile is a system-wide profiler for Linux systems, capable of profiling all running code at low overhead. OProfile is released under the GNU GPL.
</p><p>
It consists of a kernel module and a daemon for collecting sample data, and
several post-profiling tools for turning data into information.
</p><p>
OProfile leverages the CPU hardware performance counters to enable profiling of a wide variety of interesting statistics, which can also be used for basic time-spent profiling. All code is profiled: hardware and software interrupt handlers, kernel modules, the kernel, shared libraries, and applications (the only exception being the oprofile interrupt handler itself).
</p><p>
OProfile is currently in alpha status; however it has proven stable over a
large number of differing configurations. As always, there is no warranty.
</p><p>
This is the package containing the userspace tools.
</p>
-Des:
##----------------------------------------
=Pkg: oprofile-devel 0.9.6 0.4.29 x86_64
=Sum: System-Wide Profiler for Linux Systems
+Des:
<!-- DT:Rich -->
<p>OProfile is a system-wide profiler for Linux systems, capable of profiling all running code at low overhead. OProfile is released under the GNU GPL.
</p><p>
It consists of a kernel module and a daemon for collecting sample data, and
several post-profiling tools for turning data into information.
</p><p>
OProfile leverages the CPU hardware performance counters to enable profiling of a wide variety of interesting statistics, which can also be used for basic time-spent profiling. All code is profiled: hardware and software interrupt handlers, kernel modules, the kernel, shared libraries, and applications (the only exception being the oprofile interrupt handler itself).
</p><p>
OProfile is currently in alpha status; however it has proven stable over a
large number of differing configurations. As always, there is no warranty.
</p><p>
This package contains the files needed to develop JIT agents for other virtual machines.
</p>
-Des:
##----------------------------------------
=Pkg: orbit 0.5.17 447.15.40 x86_64
=Sum: A High-Performance CORBA ORB
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA ORB used by the GNOME Project.
</p><p>
</p><p>
It allows programs to send requests and receive replies from other
programs, regardless of the locations of the two programs.
</p><p>
</p><p>
You will need to install this package and the
related header files, libraries, and utilities
if you want to write programs that use CORBA
technology (package &quot;orbit-devel&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: orbit-32bit 0.5.17 447.15.40 x86_64
=Sum: A High-Performance CORBA ORB
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA ORB used by the GNOME Project.
</p><p>
</p><p>
It allows programs to send requests and receive replies from other
programs, regardless of the locations of the two programs.
</p><p>
</p><p>
You will need to install this package and the
related header files, libraries, and utilities
if you want to write programs that use CORBA
technology (package &quot;orbit-devel&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: orbit-devel 0.5.17 447.15.40 x86_64
=Sum: ORBit Development Environment
+Des:
<!-- DT:Rich -->
<p>This package includes the header files, libraries, and utilities
necessary to write programs that use the ORBit CORBA technology.
</p>
-Des:
##----------------------------------------
=Pkg: orbit2-devel 2.14.17 2.7.8 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA (Common Object Request Broker
Architecture) ORB (object request broker). It allows programs to
send requests and receive replies from other programs, regardless
of the locations of the two programs. CORBA is an architecture that
enables communication between program objects, regardless of the
programming language they are written in or the operating system they
run on.
</p><p>
You will need to install this package if you want to run programs that use
the ORBit implementation of the CORBA technology.
</p>
-Des:
##----------------------------------------
=Pkg: osc 0.125.5 0.2.34 x86_64
=Sum: openSUSE (build service) commander
+Des:
<!-- DT:Rich -->
<p>Commandline client for the openSUSE build service.
</p><p>
See http://en.opensuse.org/Build_Service/CLI , as well as
http://en.opensuse.org/Build_Service_Tutorial for a general
introduction.
</p>
-Des:
##----------------------------------------
=Pkg: ozerocdoff 0.4 1.24 x86_64
=Sum: Enable the modem ports on Option ZeroCD devices
+Des:
<!-- DT:Rich -->
<p>This tool allows to switch so called &quot;ZeroCD&quot; devices from Option into modem mode, so that they can actually be used as intended.
</p>
-Des:
##----------------------------------------
=Pkg: pam-devel 1.0.4 0.5.12 x86_64
=Sum: Include Files and Libraries for PAM-Development
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
which allows system administrators to set authentication policy
without having to recompile programs which do authentication.
</p><p>
This package contains header files and static libraries used for
building both PAM-aware applications and modules for use with PAM.
</p>
-Des:
##----------------------------------------
=Pkg: pam-devel-32bit 1.0.4 0.5.12 x86_64
=Sum: Include Files and Libraries for PAM-Development
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
which allows system administrators to set authentication policy
without having to recompile programs which do authentication.
</p><p>
This package contains header files and static libraries used for
building both PAM-aware applications and modules for use with PAM.
</p>
-Des:
##----------------------------------------
=Pkg: pango-devel 1.26.2 1.1.249 x86_64
=Sum: Inclue les fichier et bibliothèques obligatoires pour le développement
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: pango-doc 1.26.2 1.1.249 x86_64
=Sum: System for Layout and Rendering of Internationalised Text
+Des:
<!-- DT:Rich -->
<p>Pango is a library for layout and rendering of text, with an emphasis on internationalisation. It forms the core of text and font handling in GTK+ 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: pangomm-devel 2.26.0 1.1.358 x86_64
=Sum: C++ interface for pango
+Des:
<!-- DT:Rich -->
<p>pangomm provides a C++ interface to the pango library.
</p>
-Des:
##----------------------------------------
=Pkg: papi 3.7.2 0.8.24 x86_64
=Sum: Performance Application Programming Interface
+Des:
<!-- DT:Rich -->
<p>PAPI aims to provide the tool designer and application engineer with a consistent interface and methodology for use of the performance counter hardware found in most major microprocessors. PAPI enables software engineers to see, in near real time, the relation between software performance and processor events.
</p>
-Des:
##----------------------------------------
=Pkg: papi-devel 3.7.2 0.8.24 x86_64
=Sum: Software Development Kit for PAPI
+Des:
<!-- DT:Rich -->
<p>This package contains an files necessary to create Applications using PAPI.
</p>
-Des:
##----------------------------------------
=Pkg: parted-devel 1.8.8 102.21.8 x86_64
=Sum: Parted Include Files and Libraries necessary for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: patchutils 0.3.0 1.22 x86_64
=Sum: A Collection of Tools for Manipulating Patch Files
+Des:
<!-- DT:Rich -->
<p>Patchutils contains a collection of tools for manipulating patch files:
interdiff, combinediff, filterdiff, fixcvsdiff, rediff, lsdiff, and splitdiff.
You can use interdiff to create an incremental patch between two patches that
are against a common source tree. Combinediff can be used for creating a cumulative diff
from two incremental patches. Filterdiff is for extracting or excluding patches
from a patch set based on modified files matching shell wildcards. Lsdiff lists
modified files in a patch. Rediff corrects hand-edited patches.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils-devel 3.0.1 2.18 x86_64
=Sum: Static Library and Include Files of the PCI-utilities
+Des:
<!-- DT:Rich -->
<p>This package contains the files that are necessary for software development
using the PCI-utilities.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils-devel-32bit 3.0.1 2.18 x86_64
=Sum: Static Library and Include Files of the PCI-utilities
+Des:
<!-- DT:Rich -->
<p>This package contains the files that are necessary for software development
using the PCI-utilities.
</p>
-Des:
##----------------------------------------
=Pkg: pcp 2.5.0 126.17 x86_64
=Sum: Performance Co-Pilot (system-level performance monitoring)
+Des:
<!-- DT:Rich -->
<p>Performance Co-Pilot (PCP) is a framework and services to support system-level performance monitoring and performance management.
</p>
-Des:
##----------------------------------------
=Pkg: pcp-devel 2.5.0 126.17 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: pcre-devel 7.8 2.18 x86_64
=Sum: A library for Perl-compatible regular expressions
+Des:
<!-- DT:Rich -->
<p>The PCRE library is a set of functions that implement regular
expression pattern matching using the same syntax and semantics
as Perl 5, with very few differences. The current
implementation corresponds to Perl 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-acr38-devel 1.7.9 137.24 x86_64
=Sum: PC/SC IFD Handler for the ACR38 Smart Card Reader
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ACR 38 smart card reader produced by ACS.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite-devel 1.4.102 1.24 x86_64
=Sum: Development package for the MUSCLE project SmartCards library
+Des:
<!-- DT:Rich -->
<p>This package contains the development files for pcsc-lite. It allows to compile plugins for the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-towitoko 2.0.7 180.24 x86_64
=Sum: PCSC driver for Towitoko Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for Towitoko Chipdrive Micro, Extern, Extern II, Intern, and Twin and Kartenzwerg smart card readers.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p><p>
Please note, that many modern Towitoko readers are supported by the openct package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-towitoko-devel 2.0.7 180.24 x86_64
=Sum: PCSC driver for Towitoko Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for Towitoko Chipdrive Micro, Extern, Extern II, Intern, and Twin and Kartenzwerg smart card readers.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p><p>
Please note, that many modern Towitoko readers are supported by the openct package.
</p>
-Des:
##----------------------------------------
=Pkg: perftest 1.2 88.14 x86_64
=Sum: IB Performance tests
+Des:
<!-- DT:Rich -->
<p>gen2 uverbs microbenchmarks
</p>
-Des:
##----------------------------------------
=Pkg: perl-Algorithm-Annotate 0.10 2.22 x86_64
=Sum: represent a series of changes in annotate form
+Des:
<!-- DT:Rich -->
<p>Algorithm::Annotate generates a list that is useful for generating output similar to cvs annotate.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Algorithm-Diff 1.1902 2.8 x86_64
=Sum: Compute 'Intelligent' Differences Between Two Files or Lists
+Des:
<!-- DT:Rich -->
<p>This Perl module helps to create differences between two files or lists.  It is used by &#39;perl-diffmk&#39;
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-AuthCookie 3.12 1.21 x86_64
=Sum: Apache/Perl Authentication and Authorization via cookies
+Des:
<!-- DT:Rich -->
<p>Apache::AuthCookie allows you to intercept a user&#39;s first unauthenticated access to a protected document. The user will be presented with a custom form where they can enter authentication credentials. The credentials are posted to the server where AuthCookie verifies them and returns a session key.
</p><p>
The session key is returned to the user&#39;s browser as a cookie. As a cookie, the browser will pass the session key on every subsequent accesses. AuthCookie will verify the session key and re-authenticate the user.
</p><p>
All you have to do is write a custom module that inherits from AuthCookie.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-AuthNetLDAP 0.29 4.24 x86_64
=Sum: use Net::LDAP for user authentication in Apache
+Des:
<!-- DT:Rich -->
<p>Apache::AuthNetLDAP - mod_perl module that uses the Net::LDAP module
for user authentication for Apache.  This module authenticates users
via LDAP using the Net::LDAP module. This module is Graham Barr&#39;s
&quot;pure&quot; Perl LDAP API.  It also uses all of the same parameters as the
Apache::AuthPerLDAP, but I have added two extra parameters.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-DBI 1.07 1.21 x86_64
=Sum: Apache authentication via perl DBI
+Des:
<!-- DT:Rich -->
<p>These modules are supposed to be used with the Apache server together
with an embedded perl interpreter like mod_perl. They provide support
for basic authentication and authorization as well as support for
persistent database connections via Perl&#39;s Database Independent
Interface (DBI).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-Filter 1.024 1.21 x86_64
=Sum: Alter the output of previous handlers
+Des:
<!-- DT:Rich -->
<p>In basic operation, each of the handlers Filter1, Filter2, and Filter3
will make a call to $r-&gt;filter_input(), which will return a
filehandle.  For Filter1, the filehandle points to the requested
file. For Filter2, the filehandle contains whatever Filter1 wrote to
STDOUT. For Filter3, it contains whatever Filter3 wrote to STDOUT. The
output of Filter3 goes directly to the browser.
</p><p>
</p><p>
Note that the modules Filter1, Filter2, and Filter3 are listed in
forward order, in contrast to the reverse-order listing of
Apache::OutputChain.
</p><p>
</p><p>
When you&#39;ve got this module, you can use the same handler both as a
stand-alone handler, and as an element in a chain. Just make sure that
whenever you&#39;re chaining, all the handlers in the chain are &quot;Filter-
aware,&quot; i.e. they each call $r-&gt;filter_register() exactly once, before
they start printing to STDOUT. There should be almost no overhead for
doing this when there&#39;s only one element in the chain.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-Session 1.87 1.21 x86_64
=Sum: persistent storage for arbitrary data
+Des:
<!-- DT:Rich -->
<p>These modules provide persistent storage for arbitrary data, in
arbitrary backing stores.  The details of interacting with the backing
store are abstracted to make all backing stores behave alike.  The
programmer simply interacts with a tied hash.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Apache-SessionX 2.01 1.21 x86_64
=Sum: Persistent Storage for Arbitrary Data (for Embperl)
+Del:
<!-- DT:Rich -->
<p>HTML-Embperl will not work without this package.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Apache::SessionX extends Apache::Session. It was initially written to
use Apache::Session from inside of HTML::Embperl, but is seems to be
useful outside of Embperl as well, so here is it as standalone module.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This software is still beta.
</p>
-Ins:
##----------------------------------------
=Pkg: perl-Apache2-AuthCookieDBI 2.03 2.8 x86_64
=Sum: An AuthCookie module backed by a DBI database.
+Des:
<!-- DT:Rich -->
<p>Apache::AuthCookieDBI is a module that subclasses Apache::AuthCookie and is
designed to be directly used for authentication in a mod_perl server.
</p><p>
It is a ticket-issuing system that looks up username/passwords in a DBI
database using generic SQL and issues MD5-checksummed tickets valid for
a configurable time period.  Incoming requests with tickets are
checksummed and expire-time checked.
</p>
-Des:
##----------------------------------------
=Pkg: perl-App-CLI 0.07 2.8 x86_64
=Sum: Dispatcher module for command line interface programs
+Des:
<!-- DT:Rich -->
<p>App::CLI dispatches CLI (command line interface) based commands into command
classes. It also supports subcommand and per-command options.
</p>
-Des:
##----------------------------------------
=Pkg: perl-AppConfig 1.66 1.17 x86_64
=Sum: Perl module for reading configuration files and parsing command line arguments
+Des:
<!-- DT:Rich -->
<p>AppConfig is a Perl module for managing application configuration
information. It maintains the state of any number of variables and
provides methods for parsing configuration files and command line
arguments.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Arch 0.5.1 14.6 x86_64
=Sum: Perl library for GNU Arch
+Des:
<!-- DT:Rich -->
<p>The arch-perl project aims to create a Perl library for GNU Arch.
</p><p>
Currently, a pragmatic high-level interface is built around tla. This functionality was initially developed for ArchZoom project, and was highly enhanced to serve AXP and ArchWay projects as well.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Array-Compare 1.15 2.22 x86_64
=Sum: Perl extension for comparing arrays
+Des:
<!-- DT:Rich -->
<p>If you have two arrays and you want to know if they are the same or different, then Array::Compare will be useful to you.
</p><p>
All comparisons are carried out via a comparator object.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Authen-SASL 2.12 1.15 x86_64
=Sum: SASL Authentication framework
+Des:
<!-- DT:Rich -->
<p>SASL is a generic mechanism for authentication used by several
network protocols. Authen::SASL provides an implementation
framework that all protocols should be able to share.
</p><p>
The framework allows different implementations of the connection
class to be plugged in. At the time of writing there were two such
plugins.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Authen-SASL-Cyrus 0.12 5.10 x86_64
=Sum: SASL Authentication Framework - Cyrus Plugin
+Des:
<!-- DT:Rich -->
<p>SASL is a generic mechanism for authentication used by several network
protocols.
</p><p>
Authen::SASL::Cyrus is a plug-in for the Authen::SASL module and provides
an implementation framework that all protocols should be able to share.
</p><p>
The XS framework makes calls to the existing libsasl.so shared library
to perform SASL client connection functionality, including loading existing
shared library mechanisms.
</p>
-Des:
##----------------------------------------
=Pkg: perl-BIND-Conf_Parser 0.97 357.8 x86_64
=Sum: Parser class for BIND configuration files
+Des:
<!-- DT:Rich -->
<p>This module implements a virtual base class for parsing BIND
server version 8 configuration files (named.conf).
</p>
-Des:
##----------------------------------------
=Pkg: perl-BSD-Resource 1.2901 41.21 x86_64
=Sum: BSD::Resource Perl Module
+Des:
<!-- DT:Rich -->
<p>BSD::Resource is a class implementing access to process resource
limit and priority functions (e.g. getrusage, setrlimit, etc).
</p>
-Des:
##----------------------------------------
=Pkg: perl-BSSolv 0.1 0.1.42 x86_64
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: perl-Bit-Vector 6.4 1.14 x86_64
=Sum: Efficient bit vector, set of integers and "big int" math library
+Des:
<!-- DT:Rich -->
<p>Bit::Vector is an efficient C library which allows you to handle
bit vectors, sets (of integers), &quot;big integer arithmetic&quot; and
boolean matrices, all of arbitrary sizes
</p>
-Des:
##----------------------------------------
=Pkg: perl-CDDB_get 2.27 92.22 x86_64
=Sum: Read the CDDB entry for an audio CD in your drive
+Des:
<!-- DT:Rich -->
<p>This module/script gets the CDDB info for an audio cd. You need
LINUX, SUNOS or *BSD, a cdrom drive and an active internet connection
in order to do that.
</p>
-Des:
##----------------------------------------
=Pkg: perl-CGI-Application 4.20 1.22 x86_64
=Sum: Framework for building reusable web-applications
+Des:
<!-- DT:Rich -->
<p>CGI::Application is intended to make it easier to create sophisticated, reusable web-based applications.
</p><p>
This module implements a methodology which, if followed, will make your web
software easier to design, easier to document, easier to write, and easier
to evolve.
</p><p>
CGI::Application builds on standard, non-proprietary technologies and
techniques, such as the Common Gateway Interface and Lincoln D. Stein&#39;s
excellent CGI.pm module. CGI::Application judiciously avoids employing
technologies and techniques which would bind a developer to any one set of
tools, operating system or web server.
</p>
-Des:
##----------------------------------------
=Pkg: perl-CGI-Session 4.35 1.22 x86_64
=Sum: Persistent session data in CGI applications
+Des:
<!-- DT:Rich -->
<p>CGI-Session is a Perl5 library that provides an easy, reliable and modular
session management system across HTTP requests. Persistency is a key feature
for such applications as shopping carts, login/authentication routines, and
application that need to carry data across HTTP requests. CGI::Session does
that and many more.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cairo 1.060 1.17 x86_64
=Sum: Perl bindings to the cairo graphics library.
+Des:
<!-- DT:Rich -->
<p>Perl bindings to the cairo graphics library (http://www.cairographics.org).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Carp-Assert 0.20 1.21 x86_64
=Sum: Assertions in perl
+Des:
<!-- DT:Rich -->
<p>Carp::Assert is intended for a purpose like the ANSI C library assert.h
</p>
-Des:
##----------------------------------------
=Pkg: perl-Carp-Clan 6.00 1.16 x86_64
=Sum: Report Errors from the Perspective of the Caller of a "Clan" of Modules
+Des:
<!-- DT:Rich -->
<p>This module reports errors from the perspective of the caller of a &quot;clan&quot; of modules, similar to &quot;Carp.pm&quot; itself. But instead of giving
it a number of levels to skip on the calling stack, you give it a
pattern to characterize the package names of the &quot;clan&quot; of modules
that should never be blamed for errors. It makes these modules stick
together like a &quot;clan&quot; and any error that
occurs will be blamed on the &quot;outsider&quot; script or modules not belonging
to this &quot;clan&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Chart 2.4.1 1.17 x86_64
=Sum: perl libs for generating Charts
+Des:
<!-- DT:Rich -->
<p>perl Chart libs
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Accessor 0.31 1.16 x86_64
=Sum: Automated accessor generation
+Des:
<!-- DT:Rich -->
<p>This module automatically generates accessor/mutators for your class.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Autouse 1.29 1.16 x86_64
=Sum: Run-time class loading on first method call
+Des:
<!-- DT:Rich -->
<p>Class::Autouse allows you to specify a class the will only load when a
method of that class is called. For large classes that might not be used
during the running of a program, such as Date::Manip, this can save you
large amounts of memory, and decrease the script load time.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Data-Inheritable 0.08 1.22 x86_64
=Sum: Inheritable, overridable class data
+Des:
<!-- DT:Rich -->
<p>Class::Data::Inheritable is for creating accessor/mutators to class
data. That is, if you want to store something about your class as a
whole (instead of about a single object). This data is then inherited
by your subclasses and can be overriden.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Date 1.1.9 101.21 x86_64
=Sum: Class for easy date and time manipulation
+Des:
<!-- DT:Rich -->
<p>This module is intended to provide a general-purpose date and datetime
type for perl. You have a Class::Date class for absolute date and
datetime and have a Class::Date::Rel class for relative dates.
</p><p>
You can use &quot;+&quot;, &quot;-&quot;, &quot;&lt;&quot; and &quot;&gt;&quot; operators as with native perl data
types.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Inspector 1.18 1.17 x86_64
=Sum: Get Information About a Loaded Class
+Des:
<!-- DT:Rich -->
<p>Class::Inspector allows you to get information about a loaded class. Most or all of this information can be found in other ways, but they are not always very conveniet, and usually involve a relatively high level of Perl wizardry, or strange and unusual looking code. Class-Inspector attempts to provide an easier, more friendly interface to this information.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-MethodMaker 2.11 13.22 x86_64
=Sum: Class::MethodMaker
+Des:
<!-- DT:Rich -->
<p>This module solves the problem of having to write a bazillion get/set methods that are all the same.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Multimethods 1.70 436.22 x86_64
=Sum: This Package Supports Multimethods and Subroutine Overloading in Perl.
+Des:
<!-- DT:Rich -->
<p>Class::Multimethods -- Supports multimethods and subroutine overloading in Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-Spiffy 0.15 2.8 x86_64
=Sum: Framework for object oriented programming in Perl.
+Des:
<!-- DT:Rich -->
<p>&quot;Spiffy&quot; is a framework and methodology for doing object oriented (OO) programming in Perl. Spiffy combines the best parts of Exporter.pm, base.pm, mixin.pm and SUPER.pm into one magic foundation class. It attempts to fix all the nits and warts of traditional Perl OO, in a clean, straightforward and (perhaps someday) standard way.
Spiffy borrows ideas from other OO languages like Python, Ruby, Java and Perl 6. It also adds a few tricks of its own.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-WhiteHole 0.04 1.21 x86_64
=Sum: Base class to treat unhandled method calls as errors
+Des:
<!-- DT:Rich -->
<p>It&#39;s possible to accidentally inherit an AUTOLOAD method. Often this
will happen if a class somewhere in the chain uses AutoLoader or
defines one of their own. This can lead to confusing error messages
when method lookups fail.
</p><p>
Sometimes you want to avoid this accidental inheritance.  In that
case, inherit from Class::WhiteHole. All unhandled methods will
produce normal Perl error messages.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Class-XPath 1.4 1.14 x86_64
=Sum: adds xpath matching to object trees
+Des:
<!-- DT:Rich -->
<p>This module adds XPath-style matching to your object trees. This means that you can find nodes using an XPath-esque query with match() from anywhere in the tree. Also, the xpath() method returns a unique path to a given node which can be used as an identifier.
</p><p>
To use this module you must already have an OO implementation of a tree. The tree must be a true tree - all nodes have a single parent and the tree must have a single root node. Also, the order of children within a node must be stable.
</p><p>
NOTE: This module is not yet a complete XPath implementation. Over time I expect the subset of XPath supported to grow. See the SYNTAX documentation for details on the current level of support.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Clone 0.18 1.22 x86_64
=Sum: recursively copy Perl datatypes
+Des:
<!-- DT:Rich -->
<p>This module provides a clone() method which makes recursive copies of nested hash, array, scalar and reference types, including tied variables and objects.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-General 2.33 2.8 x86_64
=Sum: Generic Config Module
+Des:
<!-- DT:Rich -->
<p>Generic Config Module
</p>
-Des:
##----------------------------------------
=Pkg: perl-Config-IniFiles 2.39 1.22 x86_64
=Sum: A module for reading .ini-style configuration files
+Des:
<!-- DT:Rich -->
<p>Config::IniFiles provides a way to have readable configuration files
outside your Perl script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Convert-BER 1.3101 327.21 x86_64
=Sum: Convert::BER
+Des:
<!-- DT:Rich -->
<p>Convert::BER is a Perl object class implementation for encoding
and decoding objects as described by ITU-T standard X.209 (ASN.1)
using Basic Encoding Rules (BER).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-Blowfish 2.10 3.8 x86_64
=Sum: Blowfish encryption for Perl
+Des:
<!-- DT:Rich -->
<p>Blowfish Algorithm as a Perl module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-CBC 2.29 1.16 x86_64
=Sum: perl module Crypt::CBC
+Des:
<!-- DT:Rich -->
<p>Perl-only implementation of the cryptographic
cipher block chaining mode (CBC).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Crypt-DES 2.05 1.22 x86_64
=Sum: Crypt::DES Perl Module
+Des:
<!-- DT:Rich -->
<p>An XS-based DES implementation for Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Curses 1.24 1.22 x86_64
=Sum: A Dynamic Loadable Curses Module for Perl5
+Des:
<!-- DT:Rich -->
<p>This is a dynamic loadable curses module for Perl5.  This package
can be found at any CPAN archive.
</p>
-Des:
##----------------------------------------
=Pkg: perl-CursesWidgets 1.997 6.8 x86_64
=Sum: Curses::Widgets Module for Perl
+Des:
<!-- DT:Rich -->
<p>High level access to basic Curses widgets and related functions
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cyrus-IMAP 2.3.11 60.21.1 x86_64
=Sum: Cyrus IMAP Perl Module
+Des:
<!-- DT:Rich -->
<p>A Cyrus IMAP Perl module for the Cyrus IMAPD.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Cyrus-SIEVE-managesieve 2.3.11 60.21.1 x86_64
=Sum: A Perl Module for Cyrus SIEVE
+Des:
<!-- DT:Rich -->
<p>A Perl module for Cyrus SIEVE.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-CSV 0.22 119.15 x86_64
=Sum: The DBD::CSV module is yet another driver for the DBI
+Des:
<!-- DT:Rich -->
<p>The DBD::CSV module is yet another driver for the DBI (Database independent interface for Perl). This one is based on the SQL &quot;engine&quot; SQL::Statement and the abstract DBI driver DBD::File and implements access to so-called CSV files (Comma separated values). Such files are mostly used for exporting MS Access and MS Excel data.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-ODBC 1.17 1.15 x86_64
=Sum: Perl DBD module for interfacing with ODBC databases
+Des:
<!-- DT:Rich -->
<p>This module is needed to access ODBC databases from within Perl.
The module uses the unixODBC manager to connect to the database.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-Pg 2.10.3 1.18 x86_64
=Sum: DBD::Pg - DBI driver for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>This driver is needed to access PostgreSQL databases from Perl
programs through the Perl Database Interface (DBI).
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-XBase 0.241 1.15 x86_64
=Sum: Provides Access to XBase Files
+Des:
<!-- DT:Rich -->
<p>Module XBase provides access to XBase (dBase, Fox*) database files,
namely dbf, dbt, fpt, ndx, ntx, mdx, idx and cdx.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBD-mysql 4.008 4.3 x86_64
=Sum: Interface to the MySQL database
+Des:
<!-- DT:Rich -->
<p>A Perl5 Database Interface to the MySQL database
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBIx-Migration-Directories 0.08 1.10 x86_64
=Sum: Install/remove/upgrade/downgrade SQL schemas
+Des:
<!-- DT:Rich -->
<p>This Module provides you with a framework for managing database schemas easily.
</p>
-Des:
##----------------------------------------
=Pkg: perl-DBIx-Transaction 1.002 2.15 x86_64
=Sum: Allow transactions to be nested in DBI
+Des:
<!-- DT:Rich -->
<p>DBIx::Transaction is a wrapper around DBI that helps you manage your database transactions.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Data-Hierarchy 0.34 1.22 x86_64
=Sum: Handle data in a hierarchical structure
+Des:
<!-- DT:Rich -->
<p>Data::Hierarchy provides a simple interface for manipulating inheritable data attached to a hierarchical environment
</p>
-Des:
##----------------------------------------
=Pkg: perl-Data-ShowTable 3.3 705.10 x86_64
=Sum: A Perl Module that allows Pretty-Printing of Data Arrays
+Des:
<!-- DT:Rich -->
<p>ShowTable.pm is a Perl 5 module which defines subroutines to print arrays of
data in nicely formatted listings. It uses one of four possible formats: simple
table, boxed table, list style, and HTML-formatting.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Data-UUID 0.148 1.22 x86_64
=Sum: Perl extension for generating Globally/Universally Unique Identifiers (GUIDs/UUIDs)
+Des:
<!-- DT:Rich -->
<p>This module provides a framework for generating UUIDs (Universally Unique Identifiers, also known as GUIDs (Globally Unique Identifiers). A UUID is 128 bits long, and is guaranteed to be different from all other UUIDs/GUIDs generated until 3400 A.D. UUIDs were originally used in the Network Computing System (NCS) and later in the Open Software Foundation&#39;s (OSF) Distributed Computing Environment. Currently many different technologies rely on UUIDs to provide unique identity for various software components, Microsoft COM/DCOM for instance, uses GUIDs very extensively to uniquely identify classes, applications and components across network-connected systems.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Date-Calc 5.4 137.14 x86_64
=Sum: Perl Date-Calc Module
+Des:
<!-- DT:Rich -->
<p>This package consists of a C library and a Perl module (which uses
the C library, internally) for all kinds of date calculations based
on the Gregorian calendar (the one used in all western countries today),
thereby complying with all relevant norms and standards: ISO/R 2015-1971,
DIN 1355 and, to some extent, ISO 8601 (where applicable).
</p><p>
(See also http://www.engelschall.com/u/sb/download/Date-Calc/DIN1355/
for a scan of part of the &quot;DIN 1355&quot; document (in German)).
</p><p>
The module of course handles year numbers of 2000 and above correctly
(&quot;Year 2000&quot; or &quot;Y2K&quot; compliance) -- actually all year numbers from 1
to the largest positive integer representable on your system (which
is at least 32767) can be dealt with.
</p><p>
Note that this package EXTRAPOLATES the Gregorian calendar BACK
until the year 1 A.D. -- even though the Gregorian calendar was only
adopted in 1582 by most (not all) European countries, in obedience to
the corresponding decree of catholic pope Gregor I in that year.
</p><p>
Some (mainly protestant) countries continued to use the Julian calendar
(used until then) until as late as the beginning of the 20th century.
</p><p>
Finally, note that this package is not intended to do everything you could
ever imagine automagically for you; it is rather intended to serve as a
toolbox (in the best of UNIX spirit and traditions) which should, however,
always get you where you want to go.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Devel-CoreStack 1.3 1.25 x86_64
=Sum: try to generate a stack dump from a core file
+Des:
<!-- DT:Rich -->
<p>This module attempts to generate a stack dump from a core file by
locating the best available debugger (if any) and running it with
the appropriate arguments and command script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Devel-Symdump 2.0604 1.21 x86_64
=Sum: Inspect Perl's Symbol Table
+Des:
<!-- DT:Rich -->
<p>Devel::Symdump is a Perl module that provides a convenient way to inspect
Perl&#39;s symbol table and the class hierarchy within a running program.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Encode-HanExtra 0.23 1.21 x86_64
=Sum: Extra sets of Chinese encodings
+Des:
<!-- DT:Rich -->
<p>Perl 5.7.3 and later ships with an adequate set of Chinese encodings,
including the most used CP950, CP936 (also known as GBK), Big5,
Big5-HKSCS, EUC-CN, HZ, and ISO-IR-165.
</p><p>
However, the numbers of Chinese encodings are staggering, and a
complete coverage will easily increase the size of perl distribution
by several megabytes; hence, this CPAN module tries to provide the
rest of them.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Encode-JIS2K 0.02 3.21 x86_64
=Sum: JIS X 0212 (aka JIS 2000) Encodings
+Des:
<!-- DT:Rich -->
<p>This module implements encodings that covers JIS X 0213 charset (AKA
JIS 2000, hence the module name).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Error 0.17015 1.13 x86_64
=Sum: Object oriented style error/exception handling
+Des:
<!-- DT:Rich -->
<p>This package two interfaces. Firstly Error provides a procedural interface to exception handling. Secondly Error is a base class for errors/exceptions that can either be thrown (for subsequent catch) or simply be recorded.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Event 1.11 1.22 x86_64
=Sum: Event Loop Processing (Perl module)
+Des:
<!-- DT:Rich -->
<p>Event - A Generic Perl Event Loop
</p><p>
This extension aims to provide an simple and optimized event loop for
a broad class of applications.
</p><p>
Available via http://www.perl.com/CPAN/authors/id/JPRIT/
</p>
-Des:
##----------------------------------------
=Pkg: perl-Expect 1.21 1.15 x86_64
=Sum: Expect for perl
+Des:
<!-- DT:Rich -->
<p>A tool for automating interactive programs
</p>
-Des:
##----------------------------------------
=Pkg: perl-ExtUtils-Depends 0.301 1.22 x86_64
=Sum: ExtUtils-Depends Perl module
+Des:
<!-- DT:Rich -->
<p>This module tries to make it easy to build Perl extensions that use functions
and typemaps provided by other perl extensions. This means that a perl
extension is treated like a shared library that provides also a C and an XS
interface besides the perl one.  This works as long as the base extension is
loaded with the RTLD_GLOBAL flag (usually done with a sub dl_load_flags {0x01}
in the main .pm file) if you need to use functions defined in the module.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ExtUtils-F77 1.16 1.22 x86_64
=Sum: Simple interface to F77 libs
+Des:
<!-- DT:Rich -->
<p>This module tries to figure out how to link C programs with Fortran subroutines on your system. Basically one must add a list of Fortran runtime libraries. The problem is their location and name varies with each OS/compiler combination!
</p>
-Des:
##----------------------------------------
=Pkg: perl-ExtUtils-PkgConfig 1.11 1.15 x86_64
=Sum: ExtUtils-PkgConfig Perl module
+Des:
<!-- DT:Rich -->
<p>This module is a simplistic Perl interface to the pkg-config command-line
utility, for use in the Makefile.PLs used to build Perl modules which wrap
the libraries about which pkg-config knows.
</p>
-Des:
##----------------------------------------
=Pkg: perl-FastCGI 2.4.0 24.8 x86_64
=Sum: A scalable, open extension to CGI
+Des:
<!-- DT:Rich -->
<p>FastCGI is a language independent, scalable, open extension to CGI that provides high performance without the limitations of server specific APIs.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Basename-Object 0.01 1.22 x86_64
=Sum: Object-oriented syntax sugar for File::Basename
+Des:
<!-- DT:Rich -->
<p>File::Basename::Object is an object-oriented wrapper around File::Basename.
The goal is to allow pathnames to be presented and manipulated easily.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-HomeDir 0.66 1.22 x86_64
=Sum: Find your home and other directories, on any platform
+Des:
<!-- DT:Rich -->
<p>File::HomeDir is a module for dealing with issues relating to the
location of directories that are &quot;owned&quot; by a user, primarily your user,
and to solve these issues consistently across a wide variety of
platforms.
</p><p>
Thus, a single API is presented that can find your resources on any
platform.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-MMagic 1.27 1.22 x86_64
=Sum: Perl modules to guess file types
+Des:
<!-- DT:Rich -->
<p>Perl modules to guess file types
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Type 0.22 2.22 x86_64
=Sum: determine file type using magic
+Des:
<!-- DT:Rich -->
<p>File::Type uses magic numbers (typically at the start of a file) to determine the MIME type of that file.
</p>
-Des:
##----------------------------------------
=Pkg: perl-File-Which 0.05 1.22 x86_64
=Sum: Portable implementation of the `which' utility
+Des:
<!-- DT:Rich -->
<p>File::Which is a portable implementation (in Perl) of `which&#39;, and can
be used to get the absolute filename of an executable program
installed somewhere in your PATH, or just check for its existence. It
includes the command-line utility `pwhich&#39; which has the same function
as `which&#39;.
</p>
-Des:
##----------------------------------------
=Pkg: perl-FileHandle-Unget 0.1622 1.17 x86_64
=Sum: Perl module for creating a FileHandle which supports ungetting of multiple bytes
+Des:
<!-- DT:Rich -->
<p>FileHandle::Unget is a drop-in replacement for FileHandle which allows more
than one byte to be placed back on the input. It supports an ungetc(ORD) which
can be called more than once in a row, and an ungets(SCALAR) which places a
string of bytes back on the input.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Filter 1.34 1.22 x86_64
=Sum: Source Filters
+Des:
<!-- DT:Rich -->
<p>This package consists of a number of Source Filters. For more details see the pod documentation embedded in the .pm files.
</p><p>
If you intend using the Filter::Call functionality, I would strongly recommend that you check out Damian Conway&#39;s excellent Filter::Simple module. This module provides a much cleaner interface than Filter::Util::Call. Although it doesn&#39;t allow the fine control that Filter::Util::Call does, it should be adequate for the majority of applications.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Finance-Quote 1.16 1.1.56 x86_64
=Sum: Provides access to time-delayed stockquotes
+Des:
<!-- DT:Rich -->
<p>Finance::Quote provides access to time-delayed stockquotes from a
number of sources.  After you&#39;ve installed the pacakage, try
&#39;perldoc Finance::Quote&#39; for full information.  Alternatively,
you can &#39;perldoc lib/Finance/Quote.pm&#39; before the install.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Font-AFM 1.20 1.22 x86_64
=Sum: Interface to Adobe Font Metrics Files
+Des:
<!-- DT:Rich -->
<p>This module implements the Font::AFM class.
Objects of this class are initialized from an AFM file and allow you to obtain information about the font and the metrics of the various glyphs in the font.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Font-FreeType 0.03 3.17 x86_64
=Sum: Read font files and render glyphs from Perl using FreeType2
+Des:
<!-- DT:Rich -->
<p>Read font files and render glyphs from Perl using FreeType2
</p>
-Des:
##----------------------------------------
=Pkg: perl-FreezeThaw 0.43 2.22 x86_64
=Sum: converting Perl structures to strings and back
+Des:
<!-- DT:Rich -->
<p>Converts data to/from stringified form, appropriate for saving-to/reading-from permanent storage.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GD 2.41 1.17 x86_64
=Sum: Interface to Thomas Boutell's gd library
+Des:
<!-- DT:Rich -->
<p>This is an autoloadable interface module for libgd, a popular library
for creating and manipulating PNG files.  With this library you can
create PNG images on the fly or modify existing files.
</p><p>
This version of GD no longer supports GIF output because of threats from
the legal department at Unisys.  Source code that calls $image-&gt;gif will
have to be changed to call either $image-&gt;jpg or $image-&gt;png to output
in JPEG or PNG formats. The last version of GD that supported GIF output
was version 1.19.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GD-Graph3d 0.63 3.30 x86_64
=Sum: 3d extension for perl-GDGraph
+Des:
<!-- DT:Rich -->
<p>This is the GD::Graph3d extensions module. It provides 3D graphs
for the GD::Graph module by Martien Verbruggen, which in turn
generates graph using Lincoln Stein&#39;s GD.pm.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GDGraph 1.44 1.30 x86_64
=Sum: package to generate charts, using Lincoln Stein's GD.pm
+Des:
<!-- DT:Rich -->
<p>This is GDGraph, a package to generate charts, using Lincoln Stein&#39;s
GD.pm. See the documentation for some history and more information.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GDTextUtil 0.86 1.17 x86_64
=Sum: text utilities for use with the GD drawing package
+Des:
<!-- DT:Rich -->
<p>This package provides three modules that make it possible to work with
internal GD fonts as well as TrueType fonts, without having to worry
about different interface functions to call. Apart from an abstract
interface to all font types and strings for GD, this library also
provides some utility in aligning and wrapping your string.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Getopt-Mixed 1.09 1.22 x86_64
=Sum: GNU-style option processing (long and short) for Perl
+Des:
<!-- DT:Rich -->
<p>This module provides GNU-style option processing for Perl 5 scripts,
with both long and short options.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Glib 1.200 1.17 x86_64
=Sum: Glib Perl module
+Des:
<!-- DT:Rich -->
<p>This module provides perl access to GLib and GLib&#39;s GObject libraries.  GLib is
a portability and utility library; GObject provides a generic type system with
inheritance and a powerful signal system.  Together these libraries are used as
the foundation for many of the libraries that make up the Gnome environment,
and are used in many unrelated projects.
</p>
-Des:
##----------------------------------------
=Pkg: perl-GraphicsMagick 1.2.5 4.31.1 x86_64
=Sum: Viewer and Converter for Images - perl interface
+Des:
<!-- DT:Rich -->
<p>GraphicsMagick(TM) provides a powerful image manipulation and
translation utility. It is capable of displaying still images and
animations using the X Window system, provides a simple interface for
interactively editing images, and is capable of importing selected
windows or the entire desktop. GraphicsMagick can read and write over
88 image formats, including JPEG, TIFF, WMF, SVG, PNG, PNM, GIF, and
Photo CD. It can resize, rotate, sharpen, color reduce, or add special
effects to the image and save the result to any supported format.
GraphicsMagick may be used to create animated or transparent .gifs,
create composite images, create thumbnail images, and much, much,
more.
</p><p>
This package contains perl interface to GraphicsMagick library.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Gtk2 1.200 2.5 x86_64
=Sum: Gtk2 Perl module
+Des:
<!-- DT:Rich -->
<p>Perl bindings to the 2.x series of the Gtk+ widget set.  This module allows you
to write graphical user interfaces in a perlish and object-oriented way, freeing
you from the casting and memory management in C, yet remaining very close in
spirit to original API.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Clean 0.8 670.20 x86_64
=Sum: Cleans up HTML code for web browsers, not humans
+Des:
<!-- DT:Rich -->
<p>The majority of the web pages of the internet today are
much larger than they need to be.  The reason for this is
that HTML tends to be stored in a human readable format, with
indenting, newlines and comments.
</p><p>
</p><p>
However, all of these comments, whitespace etc. are ignored by
the browser, and needlessly lengthen download times.
</p><p>
</p><p>
Second, many people are using WYSIWYG HTML editors these days.
This makes creating content easy.  However these editors can
cause a number of compatibility problems by tying themselves to
a particular browser or operating system.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Encoding 0.60 1.14 x86_64
=Sum: Determine the encoding of HTML/XML/XHTML documents
+Des:
<!-- DT:Rich -->
<p>HTML::Encoding helps to determine the encoding of HTML and XML/XHTML
documents.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-FillInForm 2.00 1.15 x86_64
=Sum: Perl module HTML::FillInForm
+Des:
<!-- DT:Rich -->
<p>This module automatically inserts data from a previous HTML form
into the HTML input and select tags. It is a subclass of HTML::Parser
and uses it to parse the HTML and insert the values into the form tags.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Format 2.04 2.6 x86_64
=Sum: Perl Modules to Format HTML into Plain Text, PostScript, or RTF
+Des:
<!-- DT:Rich -->
<p>This is a collection of modules that format HTML as plain text, PostScript, or RTF.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-SimpleParse 0.12 71.21 x86_64
=Sum: a bare-bones HTML parser
+Des:
<!-- DT:Rich -->
<p>This is the HTML::SimpleParse module.  It is a bare-bones HTML parser,
similar to HTML::Parser, but with a couple important distinctions:
</p><p>
</p><p>
First, HTML::Parser knows which tags can contain other tags, which
start tags have corresponding end tags, which tags can exist only in
the &lt;HEAD&gt; portion of the document, and so forth.  HTML::SimpleParse
does not know any of these things.  It just finds tags and text in the
HTML you give it, it does not care about the specific content of these
tags (though it does distiguish between different _types_ of tags,
such as comments, starting tags like &lt;b&gt;, ending tags like &lt;/b&gt;, and
so on).
</p><p>
</p><p>
Second, HTML::SimpleParse does not create a hierarchical tree of HTML
content, but rather a simple linear list.  It does not pay any
attention to balancing start tags with corresponding end tags, or
which pairs of tags are inside other pairs of tags.
</p><p>
</p><p>
Because of these characteristics, you can make a very effective HTML
filter by sub-classing HTML::SimpleParse.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-TableExtract 2.10 1.13 x86_64
=Sum: Simplifies extraction of information within tables in HTML documents
+Des:
<!-- DT:Rich -->
<p>HTML::TableExtract is a module that simplifies the extraction of
information contained in tables within HTML documents.
</p><p>
Tables of note may be specified using Headers, Depth, Count,
Attributes, or some combination of the three. See the module
documentation for details.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template 2.9 2.8 x86_64
=Sum: This Module Attempts to make using HTML Templates Simple and Natural
+Des:
<!-- DT:Rich -->
<p>This allows you to separate design - the HTML - from the data, which you
generate in the Perl script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template-Expr 0.07 2.7 x86_64
=Sum: This Module Provides an Extension to HTML::Template
+Des:
<!-- DT:Rich -->
<p>This module provides an extension to HTML::Template which allows
expressions in the template syntax.
</p><p>
Expression support includes comparisons, math operations, string
operations, and a mechanism to allow you to add your own functions at
runtime.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Template-JIT 0.05 2.6 x86_64
=Sum: Just-In-Time Compiler for HTML Templates
+Des:
<!-- DT:Rich -->
<p>This is a just in time compiler for the HTML Template module. Makes the use of templates very fast.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tidy 1.08 2.7 x86_64
=Sum: HTML checker module for Perl
+Des:
<!-- DT:Rich -->
<p>HTML::Tidy is an HTML checker in a handy dandy Perl object.  Its
meant as a replacement for HTML::Lint.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTML-Tree 3.23 2.7 x86_64
=Sum: Modules for representing, creating, and extracting information from HTML syntax trees
+Des:
<!-- DT:Rich -->
<p>This distribution contains a suite of modules for representing,
creating, and extracting information from HTML syntax trees; there is
also relevent documentation.  These modules used to be part of the
libwww-perl distribution, but are now unbundled in order to facilitate
a separate development track.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTTP-DAV 0.34 1.13 x86_64
=Sum: A WebDAV client library for Perl5
+Des:
<!-- DT:Rich -->
<p>PerlDAV is a Perl library for modifying content on webservers using the
WebDAV protocol. Now you can LOCK, DELETE and PUT files and much more on
a DAV-enabled webserver.
</p>
-Des:
##----------------------------------------
=Pkg: perl-HTTPS-Daemon 1.04 2.17 x86_64
=Sum: a simple http server class with SSL support
+Des:
<!-- DT:Rich -->
<p>HTTP::Daemon::SSL is a descendant of HTTP::Daemon that uses SSL
sockets (via IO::Socket::SSL) instead of cleartext sockets.  It
also handles SSL-specific problems, such as dealing with HTTP
clients that attempt to connect to it without using SSL.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Digest 0.10 2.16 x86_64
=Sum: Calculate digests while reading or writing
+Des:
<!-- DT:Rich -->
<p>This module allows you to calculate digests while reading or writing file handles.  This avoids the case you need to reread the same content to compute the digests after written a file.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Pager 0.06 1.22 x86_64
=Sum: Select a pager, optionally pipe it output if destination is a TTY
+Des:
<!-- DT:Rich -->
<p>IO::Pager is lightweight and can be used to locate an available pager and set
$ENV{PAGER} (see &quot;NOTES&quot;) or as a factory for creating objects defined
elsewhere such as IO::Pager::Buffered and IO::Pager::Unbuffered.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Socket-INET6 2.56 3.8 x86_64
=Sum: Provides an object interface to creating and using sockets
+Des:
<!-- DT:Rich -->
<p>IO::Socket::INET6 provides an object interface to creating and using sockets
in both AF_INET|AF_INET6 domain. It is built upon the IO::Socket interface and
inherits all the methods defined by IO::Socket.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Socket-Multicast 1.05 1.22 x86_64
=Sum: A Perl Module IO::Socket::Multicast - Send and receive multicast messages.
+Des:
<!-- DT:Rich -->
<p>The IO::Socket::Multicast module subclasses IO::Socket::INET to enable you to manipulate multicast groups. With this module (and an operating system that supports multicasting), you will be able to receive incoming multicast transmissions and generate your own outgoing multicast packets.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-String 1.08 1.22 x86_64
=Sum: Perl IO/String interface
+Des:
<!-- DT:Rich -->
<p>IO::String is an IO::File (and IO::Handle) compatible class that read
or write data from in-core strings.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Stty .02 652.21 x86_64
=Sum: A Perl Module for Setting Terminal Parameters
+Des:
<!-- DT:Rich -->
<p>IO::Stty is a Perl module for setting terminal parameters.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IO-Tty 1.07 118.22 x86_64
=Sum: Provides an Interface to Pseudo Tty's
+Des:
<!-- DT:Rich -->
<p>IO::Tty is a Perl module that provides an interface to pseudo tty&#39;s.
</p>
-Des:
##----------------------------------------
=Pkg: perl-IPC-Run 0.80 39.8 x86_64
=Sum: System() and Background Procs with Piping, Redirs, and PTYs
+Des:
<!-- DT:Rich -->
<p>IPC::Run allows you run and interact with child processes using files,
pipes, and pseudo-ttys.  Both system()-style and scripted usages are
supported and may be mixed. Like­wise, functional and OO API styles
are both supported and may be mixed.
</p><p>
Authors:
<hr>
Barrie Slaymaker &lt;barries@slaysys.com&gt;
</p>
-Des:
##----------------------------------------
=Pkg: perl-Image-Size 3.1.1 1.21 x86_64
=Sum: A Perl Module to deal with Dimensions of an Image in Several Popular Formats
+Des:
<!-- DT:Rich -->
<p>The Image::Size library is based upon the &quot;wwwis&quot; script written by Alex Knowles *(alex@ed.ac.uk)*, a tool to examine HTML and add &#39;width&#39; and height&#39; parameters to image tags. The sizes are cached internally based on the file name, so multiple calls on the same file name (images used in bulleted lists, for example) do not result in repeated computations.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Inline 0.44 115.17 x86_64
=Sum: Write Perl subroutines in other programming languages
+Des:
<!-- DT:Rich -->
<p>Inline lets you write Perl subroutines in other programming languages, like
C, C++, Java, Python, Tcl and even Assembly. You don&#39;t need to compile
anything. All the details are handled transparently, so you can just run your
Perl script like normal.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Inline-C 0.12 241.16 x86_64
=Sum: Write Perl subroutines in C
+Des:
<!-- DT:Rich -->
<p>This module allows you to program C in perl. See also perl-Inline.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Linux-Inotify2 1.1 129.21 x86_64
=Sum: scalable directory/file change notification
+Des:
<!-- DT:Rich -->
<p>This module implements an interface to the Linux 2.6.13 and later Inotify file/directory change notification sytem.
</p>
-Des:
##----------------------------------------
=Pkg: perl-List-MoreUtils 0.22 2.8 x86_64
=Sum: Provide the missing functionality from List::Util
+Des:
<!-- DT:Rich -->
<p>List::MoreUtils provides some trivial but commonly needed functionality on
lists which is not going to go into List::Util.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Locale-Maketext-Lexicon 0.62 1.22 x86_64
=Sum: a module providing lexicon-handling backends
+Des:
<!-- DT:Rich -->
<p>Locale::Maketext::Lexicon, a module providing lexicon-handling backends, for &quot;Locale::Maketext&quot; to read from other localization formats, such as PO files, MO files, or from databases via the &quot;Tie&quot; interface.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Log-Dispatch 2.21 1.22 x86_64
=Sum: Module for Access to the System's Common Logging Mechanisms
+Des:
<!-- DT:Rich -->
<p>With this module you can easily send log messages to Apache-Log, e-mail addresses, files, the screen, or syslog.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Log-Log4perl 1.18 2.13 x86_64
=Sum: Log4j implementation for Perl
+Des:
<!-- DT:Rich -->
<p>Log::Log4perl lets you remote-control and fine-tune the logging behaviour of your system from the outside. It implements the widely popular (Java-based) Log4j logging package in pure Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-Lite 3.01 238.21 x86_64
=Sum: Module for Generating MIME messages
+Des:
<!-- DT:Rich -->
<p>MIME::Lite is intended as a simple, standalone module for generating
(not parsing!) MIME messages... specifically, it allows you to output a
simple, decent single- or multi-part message with text or binary
attachments. It does not require that you have the Mail:: or MIME::
modules installed.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MIME-Types 1.24 1.22 x86_64
=Sum: MIME-Type Determination
+Des:
<!-- DT:Rich -->
<p>MIME types are used in MIME entities, for instance as part of e-mail and HTTP traffic. Sometimes real knowledge about a mime-type is need.  This module will supply it.
</p>
-Des:
##----------------------------------------
=Pkg: perl-MLDBM 2.01 184.22 x86_64
=Sum: store multidimensional hash structures in tied hashes
+Des:
<!-- DT:Rich -->
<p>MLDBM, the Perl module that can be used to store multidimensional hash
structures in tied hashes (including DBM files).
</p>
-Des:
##----------------------------------------
=Pkg: perl-MLDBM-Sync 0.30 341.15 x86_64
=Sum: Perl module for safe concurrent access to MLDBM databases
+Des:
<!-- DT:Rich -->
<p>This module wraps around the MLDBM interface, by handling concurrent
access to MLDBM databases with file locking, and flushes i/o explicity
per lock/unlock. The new [Read]Lock()/UnLock() API can be used to
serialize requests logically and improve performance for bundled reads &amp;
writes.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Mail-Mbox-MessageParser 1.5000 51.15 x86_64
=Sum: A fast and simple mbox folder reader
+Des:
<!-- DT:Rich -->
<p>Mail::Mbox::MessageParser is a feature-poor but very fast mbox parser. It uses
the best of three strategies for parsing a mailbox: either using cached folder
information, GNU grep, or highly optimized Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Mail-Sendmail 0.79 58.22 x86_64
=Sum: Simple platform independent mailer
+Des:
<!-- DT:Rich -->
<p>Simple platform independent e-mail from your perl script.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Mcrypt 2.5.7.0 1.17 x86_64
=Sum: An Autoload-Capable Interface Module for libmcrypt
+Des:
<!-- DT:Rich -->
<p>The Mcrypt module provides a simple and intuitive Perl abstraction of the
libmcrypt cryptography library.  It provides mechanisms for encoding and
decoding Perl scalars.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Module-Info 0.31 25.22 x86_64
=Sum: Information about Perl modules
+Des:
<!-- DT:Rich -->
<p>Module::Info gives you information about Perl modules without actually loading the module. It actually isn&#39;t specific to modules and should work on any perl code.
</p>
-Des:
##----------------------------------------
=Pkg: perl-NKF 2.0.5 36.8 x86_64
=Sum: Perl extension for nkf (Network Kanji Filter)
+Des:
<!-- DT:Rich -->
<p>This is a Perl Extension version of nkf (Network Kanji Filter ) 1.9.
</p><p>
Usage:
</p><p>
use NKF;
$output = nkf($flag,$input);
</p><p>
$flag has the same meaning as with nkf.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Http-Server 1.1.1 2.16 x86_64
=Sum: A simple perl Http Server
+Des:
<!-- DT:Rich -->
<p>Net::HTTPServer basically turns a CGI script into a stand alone server. Useful for temporary services, mobile/local servers, or embedding an HTTP server into another program.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-IPv4Addr 0.10 7.8 x86_64
=Sum: Net::IPv4Addr Module for Perl
+Des:
<!-- DT:Rich -->
<p>Net::IPv4Addr provides functions for parsing IPv4 addresses both
in traditional address/netmask format and in the new CIDR format.
There are also methods for calculating the network and broadcast
address and also to see check if a given address is in a specific
network.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Jabber 2.0 4.17 x86_64
=Sum: Jabber Perl Library
+Des:
<!-- DT:Rich -->
<p>Net::Jabber is a convenient tool to use for any perl script
that would like to utilize the Jabber Instant Messaging
protocol. While not a client in and of itself, it provides
all of the necessary back-end functions to make a CGI client
or command-line perl client feasible and easy to use.
Net::Jabber is a wrapper around the rest of the official
Net::Jabber::xxxxxx packages.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Netmask 1.9015 2.8 x86_64
=Sum: Parse, manipulate and lookup IP network blocks
+Des:
<!-- DT:Rich -->
<p>Parse, manipulate and lookup IP network blocks.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-SNMP 5.2.0 1.15 x86_64
=Sum: Net::SNMP Perl Module
+Des:
<!-- DT:Rich -->
<p>The Net::SNMP module implements an object oriented interface to
the Simple Network Management Protocol.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Telnet 3.03 315.22 x86_64
=Sum: Net::Telnet - interact with TELNET port or other TCP ports
+Des:
<!-- DT:Rich -->
<p>Net::Telnet allows you to make client connections to a TCP port and do
network I/O, especially to a port using the TELNET protocol.  Simple
I/O methods such as print, get, and getline are provided.  More
sophisticated interactive features are provided because connecting to
a TELNET port ultimately means communicating with a program designed
for human interaction.  These interactive features include the ability
to specify a time-out and to wait for patterns to appear in the input
stream, such as the prompt from a shell.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-Whois-RIPE 1.23 1.22 x86_64
=Sum: Perl module for implementation of RIPE Whois
+Des:
<!-- DT:Rich -->
<p>Net::Whois::RIPE class implementing a RIPE whois client
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-XMPP 1.02 2.9 x86_64
=Sum: Collection of Perl Modules for Accessing the XMPP Protocol
+Des:
<!-- DT:Rich -->
<p>The Extensible Messaging and Presence Protocol (XMPP) is an IETF standard that provides a complete cross-protocol messaging solution. The problem with current IM solutions is that they are all proprietary and cannot
talk to each other.
XMPP seeks to get rid of those barriers.
</p><p>
For more information about the Jabber project, visit http://www.xmpp.org.
</p><p>
Net::XMPP is a collection of Perl modules that provide a Perl developer with access to the XMPP protocol.  Using OOP modules, it provides a clean
interface for writing anything, from a full client to a simple protocol tester.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Net-ext 1.011 6.8 x86_64
=Sum: Network extension modules for Perl
+Des:
<!-- DT:Rich -->
<p>Provides modules: Net::Gen, Net::Inet, Net::TCP, Net::UDP, Net::UNIX,
Net::TCP::Server, and Net::UNIX::Server.
</p>
-Des:
##----------------------------------------
=Pkg: perl-NetAddr-IP 4.004 1.22 x86_64
=Sum: NetAddr::IP - Manages IP addresses and subnets
+Des:
<!-- DT:Rich -->
<p>This  module is  designed as a help for managing (ranges  of)  IP
addresses. It includes efficient implementations for most common tasks
done  to subnets or  ranges of  IP addresses,  namely verifying  if an
address is within a subnet, comparing, looping, splitting subnets into
longer prefixes, compacting addresses to the shortest prefixes, etc.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PDA-Pilot 0.12.3 2.25 x86_64
=Sum: PalmPilot Perl Modules
+Des:
<!-- DT:Rich -->
<p>This package contains Perl modules for communicating with the Palm Pilot.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PDF-API2 0.66 1.22 x86_64
=Sum: Create and modify high-quality PDF files.
+Des:
<!-- DT:Rich -->
<p>A Perl Module Chain to faciliate the Creation and Modification of High-Quality &quot;Portable Document Format (aka. PDF)&quot; Files.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PDL 2.4.3 141.29 x86_64
=Sum: PDL - perlDL module extension for perl
+Des:
<!-- DT:Rich -->
<p>The perlDL project aims to turn perl into an efficient numerical language for
scientific computing. The PDL module gives standard perl the ability to
compactly store and speedily manipulate the large N-dimensional data sets.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Params-Validate 0.91 1.22 x86_64
=Sum: provides a system for validation method/function call parameters
+Des:
<!-- DT:Rich -->
<p>The Params::Validate module provides a flexible system for validation
method/function call parameters.  The validation can be as simple as
checking for the presence of required parameters or as complex as
validating object classes (via isa) or capabilities (via can),
checking parameter types, and using customized callbacks to ensure
data integrity.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Parse-Yapp 1.05 335.8 x86_64
=Sum: Perl extension for generating and using LALR parsers
+Des:
<!-- DT:Rich -->
<p>Parse::Yapp (Yet Another Perl Parser compiler) is a collection of modules
that let you generate and use yacc like thread safe (reentrant) parsers with
perl object oriented interface.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Path-Class 0.16 2.8 x86_64
=Sum: Cross-platform path specification manipulation
+Des:
<!-- DT:Rich -->
<p>`Path::Class&#39; is a module for manipulation of file and directory specifications
(strings describing their locations, like `&#39;/home/ken/foo.txt&#39;&#39; or
`&#39;C:\Windows\Foo.txt&#39;&#39;) in a cross-platform manner. It supports pretty much
every platform Perl runs on, including Unix, Windows, Mac, VMS, Epoc, Cygwin,
OS/2, and NetWare.
</p><p>
The well-known module `File::Spec&#39; also provides this service, but it&#39;s sort of
awkward to use well, so people sometimes avoid it, or use it in a way that
won&#39;t actually work properly on platforms significantly different than the ones
they&#39;ve tested their code on.
</p><p>
In fact, `Path::Class&#39; uses `File::Spec&#39; internally, wrapping all the unsightly
details so you can concentrate on your application code.  Whereas `File::Spec&#39;
provides functions for some common path manipulations, `Path::Class&#39; provides
an object-oriented model of the world of path specifications and their
underlying semantics.  `File::Spec&#39; doesn&#39;t create any objects, and its classes
represent the different ways in which paths must be manipulated on various
platforms (not a very intuitive concept). `Path::Class&#39; creates objects
representing files and directories, and provides methods that relate them to
each other.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PerlIO-eol 0.14 1.22 x86_64
=Sum: PerlIO layer for normalizing line endings
+Des:
<!-- DT:Rich -->
<p>This layer normalizes any of &quot;CR&quot;, &quot;LF&quot;, &quot;CRLF&quot; and &quot;Native&quot; into the designated line ending.  It works for both input and output handles.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PerlIO-via-dynamic 0.12 1.22 x86_64
=Sum: dynamic PerlIO layers
+Des:
<!-- DT:Rich -->
<p>PerlIO::via::dynamic is used for creating dynamic PerlIO layers. It is useful when the behavior or the layer depends on variables. You should not use this module as via layer directly (ie :via(dynamic)).
</p>
-Des:
##----------------------------------------
=Pkg: perl-PerlIO-via-symlink 0.05 1.22 x86_64
=Sum: PerlIO layers for create symlinks
+Des:
<!-- DT:Rich -->
<p>The PerlIO layer symlink allows you to create a symbolic link by writing to the file handle.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PerlMagick 6.4.3.6 7.20.1 x86_64
=Sum: Perl interface for ImageMagick
+Des:
<!-- DT:Rich -->
<p>PerlMagick is an objected-oriented Perl interface to ImageMagick.
Use the module to read, manipulate, or write an image or image sequence
from within a Perl script. This makes it suitable for Web CGI scripts.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Pod-Coverage 0.19 1.14 x86_64
=Sum: Check if the documentation of a module is comprehensive
+Des:
<!-- DT:Rich -->
<p>Developers hate writing documentation. They&#39;d hate it even more if their
computer tattled on them, but maybe they&#39;ll be even more thankful in the
long run. Even if not, perlmodstyle tells you to, so you must obey.
</p><p>
This module provides a mechanism for determining if the pod for a given
module is comprehensive.
</p><p>
It expects to find either a =head(n&gt;1) or an =item block documenting a
subroutine.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Pod-HtmlPsPdf 0.04 352.21 x86_64
=Sum: Perl module Pod::HtmlPsPdf
+Des:
<!-- DT:Rich -->
<p>Documentation projects builder in HTML, PS and PDF
formats.
</p>
-Des:
##----------------------------------------
=Pkg: perl-PostScript-Simple 0.07 2.8 x86_64
=Sum: a simple method of writing PostScript files from Perl
+Des:
<!-- DT:Rich -->
<p>PostScript::Simple allows you to have a simple method of writing PostScript
files from Perl. It has several graphics primitives that allow lines, circles,
polygons and boxes to be drawn. Text can be added to the page using standard
PostScript fonts.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Prima 1.24 16.20 x86_64
=Sum: A Perl toolkit for multi-platform GUI development
+Des:
<!-- DT:Rich -->
<p>Prima is an extensible Perl toolkit for multi-platform GUI development.
The toolkit contains a rich set of standard widgets and has emphasis on 2D
image processing tasks. A Perl program using PRIMA looks and behaves
identically on X, Win32 and OS/2.
The toolkit includes VB, a visual builder and a graphic POD viewer.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Proc-Fork 0.61 1.22 x86_64
=Sum: A Perl Module Proc::Fork - Simple, intuitive interface to the fork() system call
+Des:
<!-- DT:Rich -->
<p>This module provides an intuitive, Perl-ish way to write forking programs by letting you use blocks to illustrate which code section executes in which fork. The code for the parent, child, retry handler and error handler are grouped together in a &quot;fork block&quot;. The clauses may appear in any order, but they must be consecutive (without any other statements in between).
</p>
-Des:
##----------------------------------------
=Pkg: perl-Quantum-Superpositions 2.02 71.16 x86_64
=Sum: Qm-like superpositions for Perl
+Des:
<!-- DT:Rich -->
<p>The Quantum::Superpositions module provides a new scalar data
structure: the superposition. In a metaphor drawn from quantum
mechanics, superpositions store a collection of values by overlaying
them in parallel superimposed states within a single scalar variable.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Regexp-Common 2.122 1.22 x86_64
=Sum: Provide commonly requested regular expressions
+Des:
<!-- DT:Rich -->
<p>Provides regular expression patterns useful for validating all sorts of data.
</p><p>
E.g.:<ul>
<li>strings with balanced parenthesized delimiters or arbitrary delimiter
</li><li>IPv4 addresses
</li><li>numbers (int, float, etc.)
</li><li>palindromes
</li><li>comments in many different programming languages
</li><li>deleting leading or trailing whitespace
</li></ul>
and much more.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Regexp-Shellish 0.93 2.21 x86_64
=Sum: Shell-like regular expressions
+Des:
<!-- DT:Rich -->
<p>Provides shell-like regular expressions.  The wildcards provided are ?, * and **, where ** is like * but matches /.  See compile_shellish for details.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SGML-Parser-OpenSP 0.994 1.15 x86_64
=Sum: Perl interface to the OpenSP SGML and XML parser
+Des:
<!-- DT:Rich -->
<p>SGML::Parser::OpenSP provides a native Perl interface, written in C++
and XS, to the OpenSP SGML and XML parser.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SGMLS 1.03ii 392.8 x86_64
=Sum: SGML/XML Parsers
+Des:
<!-- DT:Rich -->
<p>SGMLSpm is a Perl script that reads ESIS output (from parsers like SP) and offers an event-based interface to the parser. As long as the parser can parse XML this also works for XML.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SOAP-Lite 0.710.08 1.17 x86_64
=Sum: SOAP::Lite for Perl
+Des:
<!-- DT:Rich -->
<p>SOAP::Lite for Perl is a collection of Perl modules which provides a simple and lightweight interface to the Simple Object Access Protocol (SOAP, also known as Service Oriented Access Protocol) both on client and server side.
</p>
-Des:
##----------------------------------------
=Pkg: perl-SQL-Statement 1.15 2.8 x86_64
=Sum: Perl Module SQL::Statement
+Des:
<!-- DT:Rich -->
<p>SQL parsing and processing engine
</p>
-Des:
##----------------------------------------
=Pkg: perl-SVN-Simple 0.27 100.31 x86_64
=Sum: A simple interface to subversion's editor interface
+Des:
<!-- DT:Rich -->
<p>SVN::Simple::Edit wraps the subversion delta editor with a perl friendly interface and then you could easily drive it for describing changes to a tree. A common usage is to wrap the commit editor, so you could make commits to a subversion repository easily.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Set-Crontab 1.02 1.22 x86_64
=Sum: Expand crontab(5)-style integer lists
+Des:
<!-- DT:Rich -->
<p>Set::Crontab parses crontab-style lists of integers and defines
some utility functions to make it easier to deal with them.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Set-IntSpan 1.13 1.22 x86_64
=Sum: Perl module for managing sets of integers
+Des:
<!-- DT:Rich -->
<p>Set::IntSpan manages sets of integers. It is optimized for sets that
have long runs of consecutive integers.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Set-Object 1.25 1.21 x86_64
=Sum: Set of objects
+Des:
<!-- DT:Rich -->
<p>This module implements a Set of objects, that is, a collection of
objects without duplications. It is similar to a Smalltalk IdentitySet.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Set-Scalar 1.22 1.22 x86_64
=Sum: Set of scalars
+Des:
<!-- DT:Rich -->
<p>This module implements a Set of scalars.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Socket-MsgHdr 0.01 1.22 x86_64
=Sum: Perl interface for the sendmsg/recvmsg functions
+Des:
<!-- DT:Rich -->
<p>Socket::MsgHdr provides advanced socket messaging operations via sendmsg
and recvmsg.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Socket6 0.22 1.22 x86_64
=Sum: IPv6 Sockets (Perl Module)
+Des:
<!-- DT:Rich -->
<p>The IPv6 related part of the C socket.h defines and structure manipulators.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Spiffy 0.30 1.22 x86_64
=Sum: Framework for object oriented programming in Perl.
+Des:
<!-- DT:Rich -->
<p>&quot;Spiffy&quot; is a framework and methodology for doing object oriented (OO) programming in Perl. Spiffy combines the best parts of Exporter.pm, base.pm, mixin.pm and SUPER.pm into one magic foundation class. It attempts to fix all the nits and warts of traditional Perl OO, in a clean, straightforward and (perhaps someday) standard way.
Spiffy borrows ideas from other OO languages like Python, Ruby, Java and Perl 6. It also adds a few tricks of its own.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Sub-Uplevel 0.2002 1.21 x86_64
=Sum: Sub::Uplevel - apparently run a function in a higher stack frame
+Des:
<!-- DT:Rich -->
<p>Like Tcl&#39;s uplevel() function, but not quite so dangerous. The idea is just to fool caller(). All the really naughty bits of Tcl&#39;s uplevel() are avoided.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Symbol-Table 1.01 1.22 x86_64
=Sum: An easy interface to symbol tables
+Des:
<!-- DT:Rich -->
<p>Symbol::Table allows the user to manipulate Perl&#39;s symbol table
</p>
-Des:
##----------------------------------------
=Pkg: perl-Template-Toolkit 2.20 1.13 x86_64
=Sum: Fast and/ Powerful Template System for Perl
+Des:
<!-- DT:Rich -->
<p>The Template Toolkit is a fast, powerful, and easily extensible template processing system written in Perl with certain key elements coded in C for maximum speed. It is ideally suited (but not limited) to the creation of static and dynamic web content, and incorporates various modules and tools to simplify this process.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Term-ReadPassword 0.11 2.22 x86_64
=Sum: Term::ReadPassword - Asking the user for a password
+Des:
<!-- DT:Rich -->
<p>This module lets you ask the user for a password in the traditional way, from the keyboard, without echoing.
</p><p>
This is not intended for use over the web; user authentication over the web is another matter entirely. Also, this module should generally be used in conjunction with Perl&#39;s crypt() function, sold separately.
</p>
-Des:
##----------------------------------------
=Pkg: perl-TermReadLine-Gnu 1.16 104.5 x86_64
=Sum: Perl extension for the GNU Readline/History Library
+Des:
<!-- DT:Rich -->
<p>This is an implementation of Term::ReadLine using the GNU
Readline/History Library. This package also has the interface with
the almost all functions and variables which are documented in the
GNU Readline/History Library Manual.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Base 0.54 1.17 x86_64
=Sum: Perl module for easily writing own test framework base classes.
+Des:
<!-- DT:Rich -->
<p>This module gives you a way to write your own test framework base class that is trivial. In fact it is as simple as two lines.
It extends Test::More and exports all of its functions
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Exception 0.27 1.16 x86_64
=Sum: Test::Exception - Test exception based code
+Des:
<!-- DT:Rich -->
<p>This module provides a few convenience methods for testing exception based code. It is built with Test::Builder and plays happily with Test::More and friends.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Pod 1.26 61.22 x86_64
=Sum: Check for POD errors in files
+Des:
<!-- DT:Rich -->
<p>Test::Pod lets you check the validity of a POD file, and report its results in standard Test::Simple fashion.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Pod-Coverage 1.08 53.6 x86_64
=Sum: Check for POD Coverage in Your Distribution
+Des:
<!-- DT:Rich -->
<p>Checks for POD coverage in files for your distribution.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Test-Warn 0.11 1.15 x86_64
=Sum: Perl extension to test methods for warnings
+Des:
<!-- DT:Rich -->
<p>This module provides a few convenience methods for testing warning based code.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-ASCIITable 0.18 1.10 x86_64
=Sum: Create a nice formatted table using ASCII characters
+Des:
<!-- DT:Rich -->
<p>Create a nice formatted table using ASCII characters.
Pretty nifty if you want to output dynamic text to your console or
other fixed-size-font displays, and at the same time it will display
it in a nice human-readable, or &quot;cool&quot; way.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-CSV_XS 0.41 1.22 x86_64
=Sum: Perl Module Text::CSV
+Des:
<!-- DT:Rich -->
<p>ext::CSV provides facilities for the composition and decomposition of comma-separated values.  An instance of the Text::CSV class can combine fields into a CSV string and parse a CSV string into fields.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-ChaSen 2.4.2 31.18 x86_64
=Sum: ChaSen Perl Module
+Des:
<!-- DT:Rich -->
<p>ChaSen Perl Module
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-CharWidth 0.04 1.22 x86_64
=Sum: Get number of occupied columns of a string on terminal
+Des:
<!-- DT:Rich -->
<p>Get number of occupied columns of a string on terminal
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-DelimMatch 1.06a 1.22 x86_64
=Sum: DelimMatch for Locating Delimited Substrings with Proper Nesting
+Des:
<!-- DT:Rich -->
<p>DelimMatch is a Perl 5 module that provides functions for locating delimited substrings with proper nesting.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-Iconv 1.4 3.22 x86_64
=Sum: Iconv interface for text recoding
+Des:
<!-- DT:Rich -->
<p>The UNIX iconv interface for perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Text-Kakasi 2.04 2.7 x86_64
=Sum: Perl binding for KAKASI, the kanji kana simple inverter
+Des:
<!-- DT:Rich -->
<p>This module provides libkakasi interface for perl. libkakasi is a part
of KAKASI.  KAKASI is the language processing filter to convert Kanji
characters to Hiragana, Katakana or Romaji and may be helpful to read
Japanese documents.  More information about KAKASI is available at
&lt;http://kakasi.namazu.org/&gt;.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tie-Cache 0.17 245.21 x86_64
=Sum: Perl module Tie::Cache
+Des:
<!-- DT:Rich -->
<p>This module implements a least recently used (LRU) cache in memory
through a tie interface.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tie-IxHash 1.21 721.22 x86_64
=Sum: TieIxHash Perl Module
+Des:
<!-- DT:Rich -->
<p>If you have been led to believe that associative arrays in Perl
do not preserve order, and if you have ever craved that feature,
this module is for you.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-Duration 1.06 1.13 x86_64
=Sum: Rounded or exact English expression of durations
+Des:
<!-- DT:Rich -->
<p>This module provides functions for expressing durations in rounded or exact terms.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-Period 1.20 306.22 x86_64
=Sum: A Perl Module for dealing with Time Periods
+Des:
<!-- DT:Rich -->
<p>Period.pm is a Perl module that contains code for dealing with time periods.
Currently, there is only one function in this module.  That function is
called inPeriod().
</p>
-Des:
##----------------------------------------
=Pkg: perl-Time-modules 2006.0814 2.8 x86_64
=Sum: Various Perl time modules
+Des:
<!-- DT:Rich -->
<p>Perl modules providing various time functions.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tk-devel 804.028 50.24 x86_64
=Sum: Perl Tk
+Des:
<!-- DT:Rich -->
<p>Perl Tk is an enhancement for Perl. It combines the well structured
graphical library Tk with the powerful scripting language Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tree-DAG_Node 1.06 2.21 x86_64
=Sum: Tree::DAG_Node - (super)class for representing nodes in a tree
+Des:
<!-- DT:Rich -->
<p>This class encapsulates/makes/manipulates objects that represent nodes in a tree structure. The tree structure is not an object itself, but is emergent from the linkages you create between nodes. This class provides the methods for making linkages that can be used to build up a tree, while preventing you from ever making any kinds of linkages which are not allowed in a tree (such as having a node be its own mother or ancestor, or having a node have two mothers).
</p>
-Des:
##----------------------------------------
=Pkg: perl-UNIVERSAL-require 0.11 2.8 x86_64
=Sum: UNIVERSAL::require - require() modules from a variable
+Des:
<!-- DT:Rich -->
<p>UNIVERSAL::require - require() modules from a variable
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unicode-Map8 0.12 98.16 x86_64
=Sum: Mapping table between 8-bit chars and Unicode
+Des:
<!-- DT:Rich -->
<p>The Unicode::Map8 class implement efficient mapping tables between
8-bit character sets and 16-bit character sets like Unicode. The
tables are efficient both in terms of space allocated and translation
speed. The 16-bit strings is assumed to use network byte order.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Unicode-String 2.09 1.22 x86_64
=Sum: String of Unicode characters (UCS2/UTF16)
+Des:
<!-- DT:Rich -->
<p>A Unicode::String object represents a sequence of Unicode characters.
The Unicode Standard is a fixed-width, uniform encoding scheme for
written characters and text. This encoding treats alphabetic characters,
ideographic characters, and symbols identically, which means that they
can be used in any mixture and with equal facility.  Unicode is modeled
on the ASCII character set, but uses a 16-bit encoding to support full
multilingual text.
</p>
-Des:
##----------------------------------------
=Pkg: perl-WeakRef 0.01 2.8 x86_64
=Sum: API for weak references to be created in Perl
+Des:
<!-- DT:Rich -->
<p>A patch to Perl 5.005_55 by the author implements a core API for weak
references. This module is a Perl-level interface to that API, allowing
weak references to be created in Perl.
</p><p>
A weak reference is just like an ordinary Perl reference except that
it isn&#39;t included in the reference count of the thing referred to.
This means that once all references to a particular piece of data are
weak, the piece of data is freed and all the weak references are set
to undef. This is particularly useful for implementing circular
data structures without memory leaks or caches of objects.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Bare 0.30 1.22 x86_64
=Sum: Minimal XML parser (Perl module)
+Des:
<!-- DT:Rich -->
<p>XML::Bare - A minimal XML parser that uses C to generate a folded perl hash.
</p><p>
This package implements XML as the author thinks it should be, not as the standard says. Means this parser is not XML conform. So be very careful if you use this package, the result does not need to be the one you would expect.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-DOM 1.44 4.7 x86_64
=Sum: Perl Extension to XML::Parser
+Des:
<!-- DT:Rich -->
<p>http://www.w3.org/DOM/
</p><p>
This is a Perl extension to XML::Parser. It adds a new &#39;Style&#39; to XML::Parser,
called &#39;Dom,&#39; that allows XML::Parser to build an Object Oriented datastructure
with a DOM Level 1 compliant interface.
</p><p>
This is a beta version and although there will not be any major API changes,
minor changes may occur as we get feedback
from the people on the perl-xml mailing list. [You can subscribe to
this list by sending a message to subscribe-perl-xml@lyris.activestate.com.]
</p><p>
</p><p>
For documentation read the manpages XML::Dom and XML::DOM::UTF8.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Dumper 0.81 1.15 x86_64
=Sum: A Perl Module XML::Dumper - Perl module for dumping Perl objects from/to XML
+Des:
<!-- DT:Rich -->
<p>XML::Dumper dumps Perl data to XML format. XML::Dumper can also read XML data that was previously dumped by the module and convert it back to Perl. You can use the module read the XML from a file and write the XML to a file. Perl objects are blessed back to their original packaging; if the modules are installed on the system where the perl objects are reconstituted from xml, they will behave as expected. Intuitively, if the perl objects are converted and reconstituted in the same environment, all should be well. And it is.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-LibXSLT 1.66 53.15 x86_64
=Sum: XML::LibXSLT Perl Module
+Des:
<!-- DT:Rich -->
<p>This module is a fast XSLT library, based on the GNOME libxslt engine that you can find at
http://www.xmlsoft.org/XSLT/.
</p><p>
The performance is currently about twice that of XML::Sablotron (based on XSLTMark tests converted to Perl).
The libxslt processor is also highly standard compliant, with practically all of XSLT 1.0 being supported in version 0.9 of libxslt.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-NodeFilter 0.01 70.14 x86_64
=Sum: XML::NodeFilter
+Des:
<!-- DT:Rich -->
<p>XML::NodeFilter is a generic node filter class for DOM traversal as specified in the DOM Level 2 Traversal and Range specification.
It extends that specification, so this class is easier to use for Perl programmers.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-RegExp 0.03 480.21 x86_64
=Sum: Regular Expressions for XML Tokens
+Des:
<!-- DT:Rich -->
<p>This package contains regular expressions for the following XML tokens:
BaseChar, Ideographic, Letter, Digit, Extender, CombiningChar, NameChar,
EntityRef, CharRef, Reference, Name, NmToken, and AttValue.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-SimpleObject-LibXML 0.60 1.22 x86_64
=Sum: Perl extension allowing a simple(r) object representation of an XML::LibXML DOM object
+Des:
<!-- DT:Rich -->
<p>This is a short and simple class allowing simple object access to a parsed XML::LibXML tree, with methods for fetching children and attributes in as clean a manner as possible.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Stream 1.22 1.17 x86_64
=Sum: Creates and XML Stream connection and parses return data
+Des:
<!-- DT:Rich -->
<p>This module provides the user with methods to connect to a remote server,
send a stream of XML to the server, and receive/parse an XML stream from
the server. It is primarily based work for the Etherx XML router
developed by the Jabber Development Team. For more information about
this project visit http://www.jabber.org/protocol/.
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-Twig 3.32 1.15 x86_64
=Sum: Tree interface to XML documents allowing processing chunk by chunk of huge documents
+Des:
<!-- DT:Rich -->
<p>XML::Twig is (yet another!) XML transformation module.
</p><p>
Its strong points: can be used to process huge documents while still
being in tree mode; not bound by DOM or SAX, so it is very perlish and
offers a very comprehensive set of methods; simple to use; DWIMs as
much as possible
</p><p>
What it doesn&#39;t offer: full SAX support (it can export SAX, but only
reads XML), full XPath support (unless you use XML::Twig::XPath), nor
DOM support.
</p><p>
Other drawbacks: it is a big module, and with over 500 methods available
it can be a bit overwhelming. A good starting point is the tutorial at
http://xmltwig.com/xmltwig/tutorial/index.html. In fact the whole
XML::Twig page at http://xmltwig.com/xmltwig/ has plenty of information
to get you started with XML::Twig
</p>
-Des:
##----------------------------------------
=Pkg: perl-XML-XSLT 0.48 1.13 x86_64
=Sum: Perl module XML::XSLT
+Des:
<!-- DT:Rich -->
<p>This is a Perl module to parse XSL Transformational sheets.
</p>
-Des:
##----------------------------------------
=Pkg: perl-YAML 0.66 1.15 x86_64
=Sum: YAML - YAML Ain't Markup Language (tm)
+Des:
<!-- DT:Rich -->
<p>YAML is a generic data serialization language that is optimized for human readability. It can be used to express the data structures of most modern programming languages, including Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-YAML-Syck 0.95 1.21 x86_64
=Sum: A fast, lightweight YAML loader and dumper library
+Des:
<!-- DT:Rich -->
<p>YAML::Syck is a fast, lightweight YAML loader and dumper library
The module interfaces libsyck.
</p>
-Des:
##----------------------------------------
=Pkg: perl-base-32bit 5.10.0 64.47.8 x86_64
=Sum: The Perl interpreter
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl is optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information.  It is also
good for many system management tasks.
</p><p>
Perl is intended to be practical (easy to use, efficient, and complete) rather than beautiful (tiny, elegant, and minimal).
</p><p>
This package contains only some basic modules and the perl binary itself.
</p>
-Des:
##----------------------------------------
=Pkg: perl-bp 0.7 2.9 x86_64
=Sum: A perl package for importing/exporting bibliographies in a variety of formats.
+Des:
<!-- DT:Rich -->
<p>BP is a Perl package that allows you to import (and in some cases export) bibliographies in a variety of formats, including bibtex, Refer, Endnote, and Melvyl.  It includes a command-line program for conversion of bibliographies.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ldap-ssl 0.37 1.19.3 x86_64
=Sum: SSL Extension to perl-ldap
+Des:
<!-- DT:Rich -->
<p>A Client interface for LDAP servers.
</p>
-Des:
##----------------------------------------
=Pkg: perl-libconfigfile 1.1.1 2.8 x86_64
=Sum: Parses simple configuration files
+Des:
<!-- DT:Rich -->
<p>ConfigFile parses simple configuration files and store its values in
an anonymous hash reference. The syntax of the configuration file is
quite simple:
<ol>
<li>This is a comment
VALUE_ONE = foo
VALUE_TWO = $VALUE_ONE/bar
VALUE_THREE = The value contains a \# (hash). # This is a comment.
COMPOSED_VALUE[one] = The first component of a clustered value
COMPOSED_VALUE[two] = The second component of a clustered value
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: perl-libintl-perl 1.16 3.83 x86_64
=Sum: Internationalization Library for Perl
+Des:
<!-- DT:Rich -->
<p>This is an internationalization library for Perl that aims to be compatible with the Uniforum message translations system as implemented for example in GNU gettext.
</p>
-Des:
##----------------------------------------
=Pkg: perl-libxml-perl 0.08 2.7 x86_64
=Sum: Collection of Perl modules for working with XML
+Des:
<!-- DT:Rich -->
<p>perl-libxml-perl is a collection of Perl modules for working with XML.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ptkdb 1.1091 2.13 x86_64
=Sum: Tk GUI based perl script debugger
+Des:
<!-- DT:Rich -->
<p>ptkdb is a debugger for perl using a Perl Tk GUI as its interface.
</p>
-Des:
##----------------------------------------
=Pkg: perl-razor-agents 2.84 1.14 x86_64
=Sum: The required perl modules for razor-agents
+Des:
<!-- DT:Rich -->
<p>razor-agents is are little programs to retrieve or update
information from the razor &lt;http://razor.sourceforge.net/&gt;
network to exchange signatures of SPAM.
This package contains the required perl modules.
</p>
-Des:
##----------------------------------------
=Pkg: perl-yui 0.1.0 5.26 x86_64
=Sum: Perl bindings for yast2-libyui
+Des:
<!-- DT:Rich -->
<p>This package provides Perl language bindings to access functions of yast2-libyui - the YaST User Interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p>
-Des:
##----------------------------------------
=Pkg: perl-zypp 0.5.3 1.2.30 x86_64
=Sum: Perl bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides Perl bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: phonon-devel 4.3.1 3.3.10 x86_64
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: php5 5.2.6 50.24.1 x86_64
=Sum: PHP5 Core Files
+Des:
<!-- DT:Rich -->
<p>This package contains the PHP5 core files, including PHP binary (CLI) and PHP configuration (php.ini). This package must be installed in order to use PHP. Additionally, extension modules and server modules (e.g. for Apache) may be installed.
</p><p>
Additional documentation is available in package <a href="pkg://php-doc">php-doc</a>.
</p>
-Des:
##----------------------------------------
=Pkg: php5-bcmath 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Binary Calculator which supports numbers of any size and
precision, represented as strings.
</p>
-Des:
##----------------------------------------
=Pkg: php5-bz2 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read and write bzip2 (.bz2) compressed files.
</p>
-Des:
##----------------------------------------
=Pkg: php5-calendar 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for converting between different calendar
formats.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ctype 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for checking whether a character or string falls
into a certain character class according to the current locale.
</p>
-Des:
##----------------------------------------
=Pkg: php5-curl 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to libcurl that allows you to connect to and
communicate with servers of many different types, using protocols
of many different types.
</p>
-Des:
##----------------------------------------
=Pkg: php5-dba 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This is a general abstraction layer for several file-based databases. As
such, functionality is limited to a common subset of features supported
by modern databases such as Sleepycat Software&#39;s DB2. (This is not to be
confused with IBM&#39;s DB2 software, which is supported through the ODBC
functions.)
</p>
-Des:
##----------------------------------------
=Pkg: php5-dbase 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for accessing records stored in dBase-format
(dbf) databases.
</p>
-Des:
##----------------------------------------
=Pkg: php5-devel 5.2.6 50.24.1 x86_64
=Sum: Include files of PHP5
+Des:
<!-- DT:Rich -->
<p>PHP is a server-side, cross-platform, HTML embedded scripting
language. If you are completely new to PHP and want to get some idea
of how it works, have a look at the Introductory Tutorial.  Once you
get beyond that have a look at the example archive sites and some of
the other resources available in the Links section.
PHP5 is the latest version.
</p>
-Des:
##----------------------------------------
=Pkg: php5-dom 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds DOM support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-exif 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for extracting EXIF (metadata from images)
information stored in headers of JPEG and TIFF images.
</p>
-Des:
##----------------------------------------
=Pkg: php5-fastcgi 5.2.6 50.24.1 x86_64
=Sum: FastCGI PHP5 Module
+Des:
<!-- DT:Rich -->
<p>PHP is a server-side, cross-platform HTML embedded scripting
language. If you are completely new to PHP and want to get some idea
of how it works, have a look at the Introductory tutorial. Once you
get beyond that have a look at the example archive sites and some of
the other resources available in the links section.
</p><p>
Please refer to /usr/share/doc/packages/php5/README.FastCGI for
information on how to use this module.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ftp 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to file servers speaking the File
Transfer Protocol (FTP) as defined in rfc959.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gd 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to create and manipulate image files in a variety
of different image formats, including GIF, PNG, JPEG, WBMP, and
XPM. Even more convenient: PHP can output image streams directly
to a browser.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gettext 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions that implement an NLS (Native Language Support)
API which can be used to internationalize your PHP applications.
</p>
-Des:
##----------------------------------------
=Pkg: php5-gmp 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for work with arbitrary-length integers using the
GNU MP library.
</p>
-Des:
##----------------------------------------
=Pkg: php5-hash 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Message Digest (hash) engine. Allows direct or incremental processing of arbitrary length messages using a variety of hashing algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: php5-iconv 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to iconv character set conversion facility.
</p>
-Des:
##----------------------------------------
=Pkg: php5-imap 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions in this extension are not limited to the IMAP
protocol, despite their name. The underlying c-client library
also supports NNTP, POP3 and local mailbox access methods.
</p>
-Des:
##----------------------------------------
=Pkg: php5-json 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Support for JSON (JavaScript Object Notation) serialization.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ldap 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to Lightweight Directory Access Protocol (LDAP).
</p>
-Des:
##----------------------------------------
=Pkg: php5-mbstring 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This extension provides multi-byte character safe string functions
and other utility functions such as conversion functions.
</p>
-Des:
##----------------------------------------
=Pkg: php5-mcrypt 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface to the mcrypt library, which supports a wide
variety of block algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: php5-mysql 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to MySQL database servers.
</p>
-Des:
##----------------------------------------
=Pkg: php5-ncurses 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Ce module ajoute le support de ncurses (pour les versions CLI et GCI uniquement).
</p>
-Des:
##----------------------------------------
=Pkg: php5-odbc 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Ce module ajoute le support dODBC.
</p>
-Des:
##----------------------------------------
=Pkg: php5-openssl 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Ce module ajoute le support d&#39;openSSL.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pcntl 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module will attempt to implement all features related to process spawning and
control (fork(), waitpid(), signal(), WIF&#39;s, etc). This is extremley experimental,
with hope to become stable on most UNIX&#39;s. I greatly appreciate any feedback, fixes,
and or suggestions on how to improve/better implement
this functionality.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pdo 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP Data Objects - Data Access Abstraction
<ul>
<li>light-weight
</li><li>provides common API for common database operations
</li><li>keeps majority of PHP specific stuff in the PDO core (such as persistent
resource management); drivers should only have to worry about getting the
data and not about PHP internals.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: php5-pear 5.2.6 50.24.1 x86_64
=Sum: PHP Extension and Application Repository
+Des:
<!-- DT:Rich -->
<p>PEAR is a code repository for PHP extensions and PHP library code
similar to TeX&#39;s CTAN and Perl&#39;s CPAN. This package provides an access
to the repository.
</p><p>
See http://pear.php.net/manual/ for more datails.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pgsql 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for access to PostgreSQL database servers.
It includes both traditional pgsql and pdo_pgsql drivers.
</p>
-Des:
##----------------------------------------
=Pkg: php5-posix 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module allows to use POSIX-like functions in PHP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-pspell 5.2.6 50.24.1 x86_64
=Sum: PHP5 pspell extension
+Des:
<!-- DT:Rich -->
<p>PHP interface to the aspell, which provides spell checking functionality.
</p>
-Des:
##----------------------------------------
=Pkg: php5-readline 5.2.6 50.24.1 x86_64
=Sum: PHP5 readline extension
+Des:
<!-- DT:Rich -->
<p>PHP interface to libedit, which provides editable command line
as well as PHP interactive mode (php -a)
</p>
-Des:
##----------------------------------------
=Pkg: php5-shmop 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read, write, create and delete
UNIX shared memory segments.
</p>
-Des:
##----------------------------------------
=Pkg: php5-snmp 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for SNMP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-soap 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module provides SOAP support.
</p><p>
SOAP extension can be used to write SOAP Servers and Clients. It supports
subsets of SOAP 1.1, SOAP 1.2 and WSDL 1.1 specifications.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sockets 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>A low-level interface to the socket communication functions
based on the popular BSD sockets, providing the possibility
to act as a socket server as well as a client.
This extension is experimental!
</p>
-Des:
##----------------------------------------
=Pkg: php5-sqlite 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This is an extension for the SQLite Embeddable SQL Database Engine.
http://www.sqlite.org/
</p><p>
SQLite is a C library that implements an embeddable SQL database engine.
Programs that link with the SQLite library can have SQL database access
without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server.
SQLite is the server. The SQLite library reads and writes directly to and from
the database files on disk.
</p><p>
This package includes sqlite and pdo_sqlite modules for sqlite version 2 and 3 respectively.
</p>
-Des:
##----------------------------------------
=Pkg: php5-suhosin 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Suhosin is an advanced protection system for PHP installations. It was designed to protect servers and users from known and unknown flaws in PHP applications and the PHP core.
</p><p>
Suhosin is binary compatible to normal PHP installation, which means it is compatible to 3rd party binary extension like ZendOptimizer.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvmsg 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module provides System V IPC support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvsem 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface for System V semaphores.
</p>
-Des:
##----------------------------------------
=Pkg: php5-sysvshm 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP interface for System V shared memory.
</p>
-Des:
##----------------------------------------
=Pkg: php5-tidy 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Tidy is an extension based on Libtidy (http://tidy.sf.net/) and allows a PHP dev
eloper to clean, repair, and traverse HTML, XHTML, and XML documents -- including ones with embedded scripting languages such as PHP or ASP within them using OO constructs.
</p>
-Des:
##----------------------------------------
=Pkg: php5-tokenizer 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>The tokenizer functions provide an interface to the PHP tokenizer
embedded in the Zend Engine. Using these functions you may write
your own PHP source analyzing or modification tools without having
to deal with the language specification at the lexical level.
</p>
-Des:
##----------------------------------------
=Pkg: php5-wddx 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions for Web Distributed Data Exchange.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xmlreader 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>XMLReader represents a reader that provides non-cached, forward-only access to XML data. It is based upon the xmlTextReader api from libxml.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xmlrpc 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds XMLRPC-EPI support.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xmlwriter 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>XMLWriter wraps the libxml xmlWriter API. Represents a writer that provides a non-cached, forward-only means of generating streams or files containing XML data.
</p>
-Des:
##----------------------------------------
=Pkg: php5-xsl 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>This module adds new XSL support to PHP.
</p>
-Des:
##----------------------------------------
=Pkg: php5-zip 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>Zip is an extension to create, modify and read zip files.
</p>
-Des:
##----------------------------------------
=Pkg: php5-zlib 5.2.6 50.24.1 x86_64
=Sum: PHP5 Extension Module
+Des:
<!-- DT:Rich -->
<p>PHP functions to read and write gzip (.gz) compressed files.
</p>
-Des:
##----------------------------------------
=Pkg: pidgin 2.6.6 0.6.47 x86_64
=Sum: GTK+-Based Multiprotocol Instant Messaging Client
+Des:
<!-- DT:Rich -->
<p>Pidgin allows you to talk to anyone using a variety of messaging protocols including AIM, MSN, Yahoo!, Jabber, Bonjour, Gadu-Gadu,
ICQ, IRC, Novell Groupwise, QQ, Lotus Sametime, SILC, Simple and
Zephyr.
These protocols are implemented using a modular, easy to use design.
To use a protocol, just add an account using the account editor.
</p><p>
Pidgin supports many common features of other clients, as well as many
unique features, such as Perl scripting, TCL scripting and C plugins.
</p><p>
Pidgin is not affiliated with or endorsed by America Online, Inc.,
Microsoft Corporation, Yahoo! Inc., or ICQ Inc.
</p>
-Des:
##----------------------------------------
=Pkg: pidgin-devel 2.6.6 0.6.47 x86_64
=Sum: Development Headers, Documentation, and Libraries for Pidgin
+Des:
<!-- DT:Rich -->
<p>The pidgin-devel package contains the header files, developer
documentation, and libraries required for development of Pidgin scripts
and plugins.
</p>
-Des:
##----------------------------------------
=Pkg: pilot-link 0.12.3 2.26 x86_64
=Sum: Pilot-Link Based Synchronization Development Header Files
+Des:
<!-- DT:Rich -->
<p>This package contains the development headers of libpisync.
</p>
-Des:
##----------------------------------------
=Pkg: pkcs11-helper-devel 1.06 1.15 x86_64
=Sum: Helper Library for the Use with Smart Cards and the PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>pkcs11-helper allows using multiple PKCS#11 providers at the same time, selecting keys by id, label or certificate subject, handling card removal and card insert events, handling card re-insert to a different slot, supporting session expiration serialization and much more, all using a simple API.
</p>
-Des:
##----------------------------------------
=Pkg: planner 0.14.3 3.41 x86_64
=Sum: Project Management Application for GNOME
+Des:
<!-- DT:Rich -->
<p>Planner is a free project management application, maintained
by Imendio.
</p><p>
If you want to contribute to the project, please subscribe
to the Planner development mailing list. Send an e-mail to
&quot;planner-dev-request@lists.imendio.com&quot; with the word &quot;subscribe&quot;
in the body of the message.
</p><p>
There is a mailing list archive available at
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
There is also a #planner IRC channel on irc.gnome.org.
</p>
-Des:
##----------------------------------------
=Pkg: planner-devel 0.14.3 3.41 x86_64
=Sum: Project Management Application for GNOME
+Des:
<!-- DT:Rich -->
<p>Planner is a free project management application, maintained
by Imendio.
</p><p>
If you want to contribute to the project, please subscribe
to the Planner development mailing list. Send an e-mail to
&quot;planner-dev-request@lists.imendio.com&quot; with the word &quot;subscribe&quot;
in the body of the message.
</p><p>
There is a mailing list archive available at
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
There is also a #planner IRC channel on irc.gnome.org.
</p>
-Des:
##----------------------------------------
=Pkg: planner-lang 0.14.3 3.41 x86_64
=Sum: Project Management Application for GNOME
+Des:
<!-- DT:Rich -->
<p>Planner is a free project management application, maintained
by Imendio.
</p><p>
If you want to contribute to the project, please subscribe
to the Planner development mailing list. Send an e-mail to
&quot;planner-dev-request@lists.imendio.com&quot; with the word &quot;subscribe&quot;
in the body of the message.
</p><p>
There is a mailing list archive available at
http://lists.imendio.com/pipermail/planner-dev/
</p><p>
There is also a #planner IRC channel on irc.gnome.org.
</p>
-Des:
##----------------------------------------
=Pkg: podsleuth 0.6.5 0.2.116 x86_64
=Sum: PodSleuth provides rich iPod metadata through HAL
+Des:
<!-- DT:Rich -->
<p>PodSleuth is a tool to discover detailed model information about an Apple (TM) iPod (TM). Its primary role is to be run as a callout by HAL because root access is needed to scan the device for required information. When the model information is discovered, it is merged into HAL as properties for other applications to use.
</p>
-Des:
##----------------------------------------
=Pkg: poppler-tools 0.12.3 1.2.44 x86_64
=Sum: PDF Rendering Library Tools
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg
of Glyph and Cog, LLC.  The purpose of forking xpdf is twofold.
First, to provide PDF rendering functionality as a shared
library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases.  In turn, all distributions must package and release
new versions of these xpdf based viewers.  It is safe to say that
there is a lot of duplicated effort with the current situation.  Even if
poppler in the short term introduces yet another xpdf-derived code
base to the world, it is hoped that over time these applications will
adopt poppler.  After all, we only need one application to use poppler
to break even.
</p><p>
Second, we would like to move libpoppler forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: popt-devel 1.7 37.16.37 x86_64
=Sum: C Library for Parsing Command Line Parameters
+Des:
<!-- DT:Rich -->
<p>Popt is a C library for parsing command line parameters.  Popt
was heavily influenced by the getopt() and getopt_long() functions,
but it improves on them by allowing more powerful argument expansion.
Popt can parse arbitrary argv[] style arrays and automatically set
variables based on command line arguments.  Popt allows command
line arguments to be aliased via configuration files and includes
utility functions for parsing arbitrary strings into argv[] arrays
using shell-like rules.
</p>
-Des:
##----------------------------------------
=Pkg: portaudio 19 234.15 x86_64
=Sum: Portable Real-Time Audio Library
+Des:
<!-- DT:Rich -->
<p>PortAudio is a portable audio I/O library designed for cross-platform
support of audio. It uses a callback mechanism to request audio processing.
Audio can be generated in various formats, including 32 bit floating point,
and will be converted to the native format internally.
</p>
-Des:
##----------------------------------------
=Pkg: portaudio-devel 19 234.15 x86_64
=Sum: Development package for the portaudio library
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that use the
portaudio library.
</p>
-Des:
##----------------------------------------
=Pkg: posix_cc 1.4 304.8 x86_64
=Sum: POSIX 1003.2 and 1003.1 2001 C Language Compilers
+Des:
<!-- DT:Rich -->
<p>c89 is the name of the C language compiler as required by the
POSIX 1003.2 standard, while c99 is the name required by the POSIX 1003.1 2001 standard.
Both are actually wrappers for gcc, passing it the options required
to make it conform to said standards in addition to the options passed via the command line.
</p><p>
Both will only accept those options mandated by the respective standards.
</p>
-Des:
##----------------------------------------
=Pkg: postfix-devel 2.5.6 5.4.21 x86_64
=Sum: Development headers for the postfix package
+Des:
<!-- DT:Rich -->
<p>Postfix aims to be an alternative to the widely-used sendmail program.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql-devel 8.3.9 0.1.1 x86_64
=Sum: PostgreSQL development header files and libraries
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
This package contains the header files and libraries
needed to compile C applications which will directly interact
with a PostgreSQL database management server and the ECPG Embedded C
Postgres preprocessor. You need to install this package if you want to
develop applications in C which will interact with a PostgreSQL server.
</p>
-Des:
##----------------------------------------
=Pkg: powertop 1.10 1.22 x86_64
=Sum: PowerTOP is a Linux Tool to Find out What is Using Power on a Laptop
+Des:
<!-- DT:Rich -->
<p>PowerTOP is a program that collects the various pieces of information from your system and presents an overview of how well your laptop is doing in terms of power savings.
</p>
-Des:
##----------------------------------------
=Pkg: ppl-devel 0.10.2 4.1.51 x86_64
=Sum: Development tools for the Parma Polyhedra Library C and C++ interfaces
+Des:
<!-- DT:Rich -->
<p>The header files, Autoconf macro, and ppl-config tool for
developing applications using the Parma Polyhedra Library through its
C and C++ interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: ppp-devel 2.4.5.git 2.23.10 x86_64
=Sum: Header Files Required for Developing Plugins for pppd
+Des:
<!-- DT:Rich -->
<p>The package ppp-devel contains C header files required for
developing plugins for the pppd.
</p>
-Des:
##----------------------------------------
=Pkg: pstoedit 3.45 1.31 x86_64
=Sum: PostScript and PDF Converter
+Des:
<!-- DT:Rich -->
<p>pstoedit converts PostScript and PDF files to other vector graphic formats so that they can be edited graphically.
</p><p>
pstoedit supports:
<ul>
<li>tgif: Tgif .obj format (for tgif version &gt;= 3)
</li><li>rpl: Real3D Programming Language Format
</li><li>lwo: LightWave 3D Object Format
</li><li>rib: RenderMan Interface Bytestream
</li><li>mif: (Frame)Maker Intermediate Format
</li><li>fig: .fig format for xfig
</li><li>xfig: .fig format for xfig
</li><li>pdf: Adobe&#39;s Portable Document Format
</li><li>gnuplot: gnuplot format
</li><li>ps: Flattened PostScript
</li><li>debug: For test purposes
</li><li>dump: For test purposes (same as debug)
</li><li>dxf: CAD exchange format
</li><li>java 1 and 2: Java applet source code
</li><li>idraw: Interviews draw format
</li><li>tcl/tk: Tcl/Tk
</li><li>hpgl: HPGL
</li><li>AI: Adobe Illustrator
</li><li>wmf: Windows Meta Files (WMF) (Windows 9x/NT only)
</li><li>ewm: Enhanced Windows Meta Files (EMF) (Windows 9x/NT only)
</li><li>OS/2 meta files (OS/2 only)
</li><li>PIC format for troff/groff
</li><li>MetaPost format for use with TeX/LaTeX
</li><li>LaTeX2e picture
</li><li>Kontour
</li><li>GNU Metafile (plotutils or libplot)
</li><li>Skencil formerly known as sketch  (http://www.skencil.org)
</li><li>Mathematica
</li><li>Conversion through ImageMagick to any format supported by ImageMagick
</li><li>SWF (beta release state--still lots of features missing, such as fonts, dash handling, etc.)
</li></ul>
pstoedit needs an installed Ghostscript interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: pstoedit-devel 3.45 1.31 x86_64
=Sum: PostScript and PDF converter (development files)
+Des:
<!-- DT:Rich -->
<p>Development files for pstoedit.
</p>
-Des:
##----------------------------------------
=Pkg: pth-32bit 2.0.7 102.22 x86_64
=Sum: GNU Portable Threads
+Des:
<!-- DT:Rich -->
<p>Pth is a very portable POSIX/ANSI-C based library for Unix platforms
which provides non-preemptive priority-based scheduling for multiple
threads of execution (&quot;multithreading&quot;) inside server applications.
All threads run in the same address space of the server application,
but each thread has it&#39;s own individual program-counter, run-time
stack, signal mask and errno variable.
</p>
-Des:
##----------------------------------------
=Pkg: pwlib 1.10.10 120.33 x86_64
=Sum: Portable Windows Library from Equivalence Pty. Ltd.
+Des:
<!-- DT:Rich -->
<p>PWLib is a moderately large class library that was created many years ago
as a method to produce applications that run on both Microsoft Windows and the
X Window System. It was supposed to have a Macintosh port as well but this never
happened.
</p><p>
It is used for the OpenH323 project, see www.openh323.org for details.
</p>
-Des:
##----------------------------------------
=Pkg: pwlib-devel 1.10.10 120.33 x86_64
=Sum: pwlib package for developers (includes headers and scripts)
+Des:
<!-- DT:Rich -->
<p>This package includes header files and scripts needed for developers
using the PWLIB library.
</p>
-Des:
##----------------------------------------
=Pkg: pybliographer 1.2.11 1.33 x86_64
=Sum: A Tool for Bibliographic Databases
+Des:
<!-- DT:Rich -->
<p>Pybliographer is a tool for managing bibliographic databases. It
currently supports the following formats:
<ul>
<li>BibTeX (quite complete)
</li><li>Medline (read-only)
</li><li>Ovid files (from ovid.com)
</li><li>Refer and EndNote (read only)
</li><li>SGML DocBook (write only)
</li></ul>
Pybliographer can be used for searching, editing, reformatting, etc.
In fact, it&#39;s a simple framework that provides easy to use python
classes and functions, and therefore can be extended to any usage
(generating HTML pages according to bibliographic searches, etc).
</p><p>
In addition to the scripting environment, a graphical GNOME interface
is available. It provides powerful editing capabilities, in addition
to a nice hierarchical search mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: pychecker 0.8.18 1.17 x86_64
=Sum: A tool for finding bugs in python source code
+Des:
<!-- DT:Rich -->
<p>PyChecker is a tool for finding bugs in <a href="pkg://python">python</a> source code.
It finds problems that are typically caught by a compiler for less
dynamic languages, like C and C++.  Because of the dynamic nature
of python, some warnings may be incorrect; however,
spurious warnings should be fairly infrequent.
</p>
-Des:
##----------------------------------------
=Pkg: pylint 0.15.0 1.17 x86_64
=Sum: Syntax and style checker for Python code
+Des:
<!-- DT:Rich -->
<p>Pylint analyzes Python source code looking for bugs and signs of poor quality.
</p><p>
Pylint is a python tool that checks if a module satisfy a coding standard. Pylint can be seen as another PyChecker since nearly all tests you can do with PyChecker can also be done with Pylint. But Pylint offers some more features, like checking line-code&#39;s length, checking if variable names are well-formed according to your coding standard, or checking if declared interfaces are truly implemented, and much more (see the complete check list).
</p><p>
</p><p>
The big advantage with Pylint is that it is highly configurable, customizable, and you can easily write a small plugin to add a personal feature.
</p><p>
Please send any comment, patch or question to the python-projects mailing-list. Before asking a question, please first search the archives in case it would have already been answered. You may want to use google and add &quot;site:lists.logilab.org&quot; to your keywords to narrow your search. We will soon provide our own search engine.
</p>
-Des:
##----------------------------------------
=Pkg: pyrex 0.9.5.1a 1.17 x86_64
=Sum: lets you write code that mixes Python and C data types, and compiles it into a C extension for Python
+Des:
<!-- DT:Rich -->
<p>Pyrex is a language specially designed for writing Python extension modules. It&#39;s designed to bridge the gap between the nice, high-level, easy-to-use world of Python and the messy, low-level world of C.
</p><p>
http://www.cosc.canterbury.ac.nz/~greg/python/Pyrex/
</p>
-Des:
##----------------------------------------
=Pkg: pysol 4.82 435.32 x86_64
=Sum: Nice solitaire game
+Des:
<!-- DT:Rich -->
<p>PySol is an X11 solitaire game with a number of nice features, including hints, autoplay, unlimited undo, player statistics, demo mode, selectable card set and background graphics, and integrated help. It currently plays over one hundred different games and variants, and has a plug-in architecture which makes adding more easy.
</p>
-Des:
##----------------------------------------
=Pkg: python-32bit 2.6.0 8.9.28 x86_64
=Sum: Python Interpreter
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
If you want to install third party modules using distutils, you need to install <a href="pkg://python-devel">python-devel</a> package.
</p>
-Des:
##----------------------------------------
=Pkg: python-ReportLab 2.1 2.8 x86_64
=Sum: Open Source PDF library for Python
+Des:
<!-- DT:Rich -->
<p>See http://www.reportlab.org/rl_toolkit.html
</p><p>
The ReportLab Open Source PDF library is a proven industry-strength PDF generating solution, that you can use for meeting your requirements and deadlines in enterprise reporting systems.
</p><p>
Our free Open Source PDF library is suitable for web publishers, developers or creative design professionals who need to quickly and easily create or automate complex (even data-driven) documents. It lets you create professional documents programmatically without being locked into one special technology and/or platform. It has grown over years in response to the real-world requirements of large financial institutions&#39; reporting needs, making it the trusted proven foundation of existing enterprise solutions rather than a just a fancy gimmick or interesting library.
</p><p>
This library implements a flexible layout engine named Platypus that builds documents from components like headlines, paragraphs, fonts, tables, bitmap images, vector graphics, etc. These flowable elements are placed in a document &quot;story&quot; following a set of templates for frames, pages and the entire document itself. In addition to the standard 14 PostScript fonts there is full support for custom embedded Type-1 as well as for Asian fonts. The included graphics subpackage provides a set of primitive shapes as well as reusable widgets building on them. Among the sample collections is a very useful set of business chart diagrams, including bar charts, line charts and pie charts. Different renderers can be used to create vector graphics (in fact, even full document pages) as individual components not only in PDF, but also in EPS and in a variety of bitmap formats including JPEG, PNG, GIF, BMP and PICT.
</p>
-Des:
##----------------------------------------
=Pkg: python-ao 0.82 146.16 x86_64
=Sum: A Python Wrapper Module for the Audio Output Library
+Des:
<!-- DT:Rich -->
<p>This module makes the <a href="pkg://libao"> libao (Audio Output)</a> functions available
in <a href="pkg://python"> Python</a>. With this module you can write Python applications
that use the cross platform audio output library.
</p>
-Des:
##----------------------------------------
=Pkg: python-aqbanking 2.3.3 1.33 x86_64
=Sum: Library for Online Banking Functions and Financial Data Import/Export
+Des:
<!-- DT:Rich -->
<p>AqBanking is a generic OnlineBanking interface. It allows multiple backends (currently HBCI) and multiple frontends  (e.g. KDE, GNOME, console) to be used.
</p>
-Des:
##----------------------------------------
=Pkg: python-avahi 0.6.23 11.19.22 x86_64
=Sum: A set of Avahi utilities written in Python
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete, implementing all MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition, it supports some nifty things that have never been seen elsewhere, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: python-avahi-gtk 0.6.23 13.19.26 x86_64
=Sum: A set of Avahi utilities written in Python Using python-gtk
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing. It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now feature complete, implementing all MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs. It passes all tests in the Apple Bonjour conformance test suite. In addition, it supports some nifty things that have never been seen elsewhere, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: python-bibtex 1.2.4 1.19 x86_64
=Sum: Python Interface to BibTeX Files
+Des:
<!-- DT:Rich -->
<p>This python extension contains a BibTeX parser and simple bindings to the GNU Recode library.
This extension is intended to be used with pybliographer.
</p>
-Des:
##----------------------------------------
=Pkg: python-cairo-devel 1.6.4 1.26 x86_64
=Sum: Headers for python-cairo
+Des:
<!-- DT:Rich -->
<p>Headers for python-cairo
</p>
-Des:
##----------------------------------------
=Pkg: python-cmdln 1.1.1 1.20 x86_64
=Sum: An improved cmd.py for Writing Multi-command Scripts and Shells
+Des:
<!-- DT:Rich -->
<p>`cmdln.py` is an extension of Python&#39;s default `cmd.py` module that
provides &quot;a simple framework for writing line-oriented command
interpreters&quot;.  The idea (with both cmd.py and cmdln.py) is to be able
to quickly build multi-sub-command tools (think cvs or svn) and/or
simple interactive shells (think gdb or pdb).  Cmdln&#39;s extensions make
it more natural to write sub-commands, integrate optparse for simple
option processing, and make having good command documentation easier.
</p>
-Des:
##----------------------------------------
=Pkg: python-compizconfig 0.7.8 1.37 x86_64
=Sum: Python bindings for libraries/plugins for compizconfig-settings
+Des:
<!-- DT:Rich -->
<p>Python bindings for libraries/plugins for compizconfig-settings
</p>
-Des:
##----------------------------------------
=Pkg: python-crypto 2.0.1 28.18.1 x86_64
=Sum: Collection of cryptographic algorithms and protocols, implemented for use from Python
+Des:
<!-- DT:Rich -->
<p>The package contains:
The package contains:<ul>
<li>Hash functions: MD2, MD4, RIPEMD, SHA256.
</li><li>Block encryption algorithms: AES, ARC2, Blowfish, CAST, DES, Triple-DES, IDEA, RC5.
</li><li>Stream encryption algorithms: ARC4, simple XOR.
</li><li>Public-key algorithms: RSA, DSA, ElGamal, qNEW.
</li><li>Protocols: All-or-nothing transforms, chaffing/winnowing.
</li><li>Miscellaneous: RFC1751 module for converting 128-key keys into a set of English words, primality testing.
</li><li>Some demo programs (currently all quite old and outdated).
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-cssutils 0.9.5b2 2.20 x86_64
=Sum: Cascading Style Sheets (CSS) parser and library for Python
+Des:
<!-- DT:Rich -->
<p>Cssutils are based upon and partly implement the following specifications
(DOM only, not any rendering facilities):
</p><p>
CSS 2.1
Rules and properties are defined here
</p><p>
CSS 2.1 Errata
A few erratas, mainly the definition of CHARSET_SYM tokens
</p><p>
MediaQueries
MediaQueries are part of stylesheets.MediaList since v0.9.4, used in
@import and @media rules.
</p><p>
Namespaces
Added in v0.9.1 and updated to definition in CSSOM in v0.9.4
</p><p>
Selectors
The selector syntax defined here (and not in CSS 2.1) should be parsable
with cssutils (should mind though ;) )
</p><p>
DOM Level 2 Style CSS
DOM for package css
</p><p>
DOM Level 2 Style Stylesheets
DOM for package stylesheets
</p><p>
CSSOM
A few details (mainly the NamespaceRule DOM) is taken from here. Plan is to
move implementation to the stuff defined here which is newer but still no
REC so might change in the future
</p>
-Des:
##----------------------------------------
=Pkg: python-cssutils-doc 0.9.5b2 2.20 x86_64
=Sum: Documentation and examples for cssutils
+Des:
<!-- DT:Rich -->
<p>This package contains the HTML and TeX documentation for cssutils as well as
examples of how to use them.
</p>
-Des:
##----------------------------------------
=Pkg: python-cups 1.9.42 4.24 x86_64
=Sum: Python Bindings for CUPS
+Des:
<!-- DT:Rich -->
<p>Python Bindings for CUPS, the Common Unix Printing System
</p>
-Des:
##----------------------------------------
=Pkg: python-dateutil 1.4.1 1.20 x86_64
=Sum: A Python Datetime Library
+Des:
<!-- DT:Rich -->
<p>The python dateutil module provides powerful extensions to the standard datetime module.
<ul>
<li>Computing of relative deltas (next month, next year, next monday, last week of month, etc.)
</li><li>Computing of relative deltas between two given dates and/or datetime objects
</li><li>Computing of dates based on very flexible recurrence rules, using a superset of the
iCalendar specification. Parsing of RFC strings is supported as well.
</li><li>Generic parsing of dates in almost any string format.
</li><li>Timezone (tzinfo) implementations for tzfile(5) format files (/etc/localtime, /usr/share/zoneinfo, etc.),
TZ environment string (in all known formats), iCalendar format files, given ranges (with help from relative deltas),
local machine timezone, fixed offset timezone, UTC timezone, and Windows registry-based time zones.
</li><li>Internal up-to-date world timezone information based on Olson&#39;s database.
</li><li>Computing of Easter Sunday dates for any given year, using Western, Orthodox or Julian algorithms.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-demo 2.6.0 8.9.28 x86_64
=Sum: Python Demonstration Scripts
+Des:
<!-- DT:Rich -->
<p>Various demonstrations of what you can do with Python and a number
of programs that are useful for building or extending Python.
</p>
-Des:
##----------------------------------------
=Pkg: python-devel 2.6.0 8.9.20 x86_64
=Sum: Include Files and Libraries Mandatory for Building Python Modules
+Des:
<!-- DT:Rich -->
<p>The Python programming language&#39;s interpreter can be extended with
dynamically loaded extensions and can be embedded in other programs.
</p><p>
This package contains header files, a static library, and development tools for building Python modules, extending the Python interpreter or embedding Python in applications.
</p>
-Des:
##----------------------------------------
=Pkg: python-dialog 2.7 9.8 x86_64
=Sum: A Python interface to the Unix dialog utility
+Des:
<!-- DT:Rich -->
<p>A Python interface to the Unix dialog utility, designed to provide an easy, pythonic and as complete as possible way to use the dialog features from Python code.
</p>
-Des:
##----------------------------------------
=Pkg: python-eyeD3 0.6.16 1.17 x86_64
=Sum: Python Module for ID3 Tag Manipulation
+Des:
<!-- DT:Rich -->
<p>A Python module for the the manipulation of ID3 tags. It supports the versions 1.0, 1.1, 2.3, and 2.4 of the ID3 standard. It can also retrieve information, such as length and bit rate, from an MP3 file.
</p>
-Des:
##----------------------------------------
=Pkg: python-fcgi 2000.09.21 150.10 x86_64
=Sum: Python FastCGI Module
+Des:
<!-- DT:Rich -->
<p>The fcgi.py Python module handles communication with the FastCGI
module from the Apache or Stronghold web server without using the
FastCGI developers kit. It will also work in a non-FastCGI
environment, (straight CGI).
</p>
-Des:
##----------------------------------------
=Pkg: python-gammu 0.26 1.26 x86_64
=Sum: Python Module to Communicate with Mobile Phones
+Des:
<!-- DT:Rich -->
<p>This provides the gammu module that can work with any phone supported by Gammu (many phones from Nokia, Siemens, and Alcatel).
</p>
-Des:
##----------------------------------------
=Pkg: python-gdata 1.2.2 1.20 x86_64
=Sum: Python library to access data through Google Data APIs
+Des:
<!-- DT:Rich -->
<p>The Google data Python Client Library provides a library and source code that make it easy to access data through Google Data APIs.
</p>
-Des:
##----------------------------------------
=Pkg: python-gdbm 2.6.0 8.9.28 x86_64
=Sum: Python Interface to the GDBM Library
+Des:
<!-- DT:Rich -->
<p>An easy to use interface for GDBM databases. GDBM is the GNU
implementation of the standard Unix DBM databases.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-32bit 2.22.0 67.32 x86_64
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>PyGNOME is an extension module for python that gives you access to the
GNOME libraries.  This means you have access to more widgets, simple
configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-devel 2.22.0 67.32 x86_64
=Sum: Headers for python-gnome
+Des:
<!-- DT:Rich -->
<p>Headers for python-gnome
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-extras-doc 2.19.1 145.31 x86_64
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME-python-extras is an extension module for python that gives you access to more GNOME libraries.  This means you have access to more widgets, simple configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gobject2-devel 2.20.0 1.1.56 x86_64
=Sum: Python bindings for GObject
+Des:
<!-- DT:Rich -->
<p>This package contains files required to build wrappers for gobject addon
libraries such as pygtk.
</p>
-Des:
##----------------------------------------
=Pkg: python-gobject2-doc 2.20.0 1.1.56 x86_64
=Sum: Python bindings for GObject
+Des:
<!-- DT:Rich -->
<p>Pygobjects is an extension module for python that gives you access to GLib&#39;s
GObjects.
</p>
-Des:
##----------------------------------------
=Pkg: python-goocanvas 0.10.0 1.27 x86_64
=Sum: Python bindings for goocanvas
+Des:
<!-- DT:Rich -->
<p>Python bindings for goocanvas.
</p>
-Des:
##----------------------------------------
=Pkg: python-gpgme 0.1 2.27 x86_64
=Sum: A Python module for working with OpenPGP messages
+Des:
<!-- DT:Rich -->
<p>PyGPGME is a Python module that lets you sign, verify, encrypt and decrypt messages using the OpenPGP format.
</p><p>
It is built on top of the GNU Privacy Guard and the GPGME library.
</p>
-Des:
##----------------------------------------
=Pkg: python-gstreamer-0_10 0.10.17 1.1.124 x86_64
=Sum: Python Bindings for GStreamer
+Des:
<!-- DT:Rich -->
<p>This module contains a wrapper that allows GStreamer applications to be written in Python.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk-devel 2.16.0 1.1.251 x86_64
=Sum: Files needed to build wrappers for GTK+ addon libraries
+Des:
<!-- DT:Rich -->
<p>This package contains files required to build wrappers for GTK+ addon libraries so that they interoperate with pygtk.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk-doc 2.16.0 1.1.251 x86_64
=Sum: Python bindings for the GTK+ widget set
+Des:
<!-- DT:Rich -->
<p>PyGTK is an extension module for python that gives you access to the GTK+
widget set.  Just about anything you can write in C with GTK+ you can write
in python with PyGTK (within reason), but with all of python&#39;s benefits.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtkglext 1.1.0 47.26 x86_64
=Sum: Python bindings for gtkglext
+Des:
<!-- DT:Rich -->
<p>PyGtkGLExt is a Python language binding for GtkGLExt.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtkglext-devel 1.1.0 47.26 x86_64
=Sum: Python bindings for gtkglext
+Des:
<!-- DT:Rich -->
<p>PyGtkGLExt is a Python language binding for GtkGLExt.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtksourceview-devel 2.4.0 1.32 x86_64
=Sum: Python bindings for the GTK+ source editing widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard
GTK+ 2.x text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p><p>
This package contains Python bindings for the library.
</p>
-Des:
##----------------------------------------
=Pkg: python-hippo-canvas 0.3.0 3.35 x86_64
=Sum: Cairo/GObject/GTK+ based canvas
+Des:
<!-- DT:Rich -->
<p>Cairo/GObject/GTK+ based canvas
</p>
-Des:
##----------------------------------------
=Pkg: python-httplib2 0.4.0 1.17 x86_64
=Sum: A Python HTTP library
+Des:
<!-- DT:Rich -->
<p>A comprehensive python HTTP client library, which supports many features left
out of other HTTP libraries.
</p>
-Des:
##----------------------------------------
=Pkg: python-idle 2.6.0 8.9.28 x86_64
=Sum: An Integrated Development Environment for Python
+Des:
<!-- DT:Rich -->
<p>IDLE is a Tkinter based integrated development environment for Python. It features a multi-window text editor with multiple undo, Python colorizing, and many other things, as well as a Python shell window and a debugger.
</p>
-Des:
##----------------------------------------
=Pkg: python-imaging 1.1.6 168.32 x86_64
=Sum: The Python Imaging Library - PIL
+Des:
<!-- DT:Rich -->
<p>The Python Imaging Library adds fairly powerful image processing
capabilities to the Python interpreter and provides extensive file
format support, and efficient internal representation.
</p>
-Des:
##----------------------------------------
=Pkg: python-imaging-sane 1.1.6 168.32 x86_64
=Sum: Python SANE module
+Des:
<!-- DT:Rich -->
<p>The SANE module provides an interface to the SANE scanner and frame
grabber interface for Linux.
It is a part of the Python Imaging Library.
</p>
-Des:
##----------------------------------------
=Pkg: python-kde4 4.3.5 0.3.77 x86_64
=Sum: Python Bindings for KDE 4.x Platform
+Des:
<!-- DT:Rich -->
<p>This package contains support for writing or running KDE applications written in Python
</p>
-Des:
##----------------------------------------
=Pkg: python-keyring 0.2 0.1.64 x86_64
=Sum: Python Library That Provides Access to KDE/Gnome/MacOS/Windows keyrings
+Des:
<!-- DT:Rich -->
<p>Generic keyring library for python applications. It can be used standalone or with
wrapper plugins for KDE or Gnome.
</p>
-Des:
##----------------------------------------
=Pkg: python-keyring-gnome 0.2 0.1.64 x86_64
=Sum: Gnome keyring support for python keyring
+Des:
<!-- DT:Rich -->
<p>This plugin enhances python keyring applications to use the Gnome keyring system to
store passwords.
</p>
-Des:
##----------------------------------------
=Pkg: python-keyring-kde 0.2 0.1.64 x86_64
=Sum: KDE KWallet support for python keyring
+Des:
<!-- DT:Rich -->
<p>This plugin enhances python keyring applications to use the KDE 4 Wallet system to
store passwords.
</p>
-Des:
##----------------------------------------
=Pkg: python-lcms 1.17 77.14.19 x86_64
=Sum: Python Bindings for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>Little cms is a small speed optimized color management engine.
</p>
-Des:
##----------------------------------------
=Pkg: python-libbtctl 0.10.0 60.27 x86_64
=Sum: GObject Bluetooth Controller Library
+Des:
<!-- DT:Rich -->
<p>This library is intended to provide convenient GObject-style access tocommon platform Bluetooth functions.
The idea of this library is to stand alone and not require GNOME.
It provides .NET bindings (in a separate package) and Python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: python-logilab-astng 0.17.3 1.17 x86_64
=Sum: Python Python Abstract Syntax Tree (New Generation)
+Des:
<!-- DT:Rich -->
<p>The aim of this module is to provide a common base representation of
python source code for projects such as pychecker, pyreverse,
pylint... Well, actually the development of this library is essentially
governed by pylint&#39;s needs.
</p><p>
It extends class defined in the compiler.ast [1] module with some
additional methods and attributes. Instance attributes are added by a
builder object, which can either generate extended ast (let&#39;s call
them astng ;) by visiting an existant ast tree or by inspecting living
object. Methods are added by monkey patching ast classes.
</p><p>
Please send any comment, patch or question to the python-projects mailing-list.
Before asking a question, please first search the archives in case it would
have already been answered. You may want to use google and add
&quot;site:lists.logilab.org&quot; to your keywords to narrow your search.
We will soon provide our own search engine.
</p>
-Des:
##----------------------------------------
=Pkg: python-logilab-common 0.35.0 1.17 x86_64
=Sum: Python lowlevel functionality shared by logilab projects
+Des:
<!-- DT:Rich -->
<p>The package logilab.common contains several modules providing low level functionalities shared among some python projects developed by logilab.
</p><p>
The package is used by pylint, an advanced Python style and syntax checker.
</p><p>
Please note that some of the modules have some extra dependencies. For instance, logilab.common.db will require a db-api 2.0 compliant database driver. Command line parsing modules require optik to be installed, if you&#39;re using python2.1 or 2.2.
</p><p>
Please send any comment, patch or question to the python-projects mailing-list. Before asking a question, please first search the archives in case it would have already been answered. You may want to use google and add &quot;site:lists.logilab.org&quot; to your keywords to narrow your search. We will soon provide our own search engine.
</p>
-Des:
##----------------------------------------
=Pkg: python-lxml 2.1.2 1.20 x86_64
=Sum: A Pythonic Binding for the libxml2 and libxslt Libraries
+Des:
<!-- DT:Rich -->
<p>lxml is a Pythonic binding for the libxml2 and libxslt libraries.
It follows the ElementTree API as much as possible, building it on top of the native libxml2 tree.
It also extends this API to expose libxml2 and libxslt specific
functionality, such as XPath, Relax NG, XML Schema, XSLT, and c14n.
</p>
-Des:
##----------------------------------------
=Pkg: python-lxml-doc 2.1.2 1.20 x86_64
=Sum: Documentation for python-lxml Package
+Des:
<!-- DT:Rich -->
<p>Documentation for python-lxml package
</p>
-Des:
##----------------------------------------
=Pkg: python-m2crypto 0.19.1 1.1.38 x86_64
=Sum: Crypto and SSL toolkit for Python
+Des:
<!-- DT:Rich -->
<p>M2Crypto is a crypto and SSL toolkit for Python featuring the following:
</p><p>
RSA, DSA, DH, HMACs, message digests, symmetric ciphers (including AES).
SSL functionality to implement clients and servers.
HTTPS extensions to Python&#39;s httplib, urllib, and xmlrpclib.
Unforgeable HMAC&#39;ing AuthCookies for web session management.
FTP/TLS client and server.
S/MIME.
ZServerSSL: A HTTPS server for Zope.
ZSmime: An S/MIME messenger for Zope.
</p><p>
It currently lives at
http://wiki.osafoundation.org/bin/view/Projects/MeTooCrypto. The original
M2Crypto homepage is at http://sandbox.rulemaker.net/ngps/m2/.
</p>
-Des:
##----------------------------------------
=Pkg: python-magic 4.24 43.18 x86_64
=Sum: Python module to use libmagic
+Del:
<!-- DT:Rich -->
<p>This package is required by lpdfilter.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package contains the python binding that require the magic &quot;file&quot; interface.
</p>
-Des:
##----------------------------------------
=Pkg: python-mpservlets 1.1.6 2.19 x86_64
=Sum: Mod_python Servlets - a mod_python handler
+Des:
<!-- DT:Rich -->
<p>A mod_python handler that uses instances of subclasses of class Servlet (thus
its name) to respond to HTTP GET and POST requests.  For each request a series
of methods are called on the instance, the output of such being sent to the
client as the response.  This handler was inspired by WebWare.
</p>
-Des:
##----------------------------------------
=Pkg: python-mpservlets-doc 1.1.6 2.19 x86_64
=Sum: API Reference in HTML and PDF
+Des:
<!-- DT:Rich -->
<p>This documentation is generated using epydoc (http://epydoc.sourceforge.net)
which uses simple, special markup in python doc strings, so the source code is
well documented as well.
</p>
-Des:
##----------------------------------------
=Pkg: python-mpservlets-tutorial 1.1.6 2.19 x86_64
=Sum: A tutorial on developing web applications using servlets
+Des:
<!-- DT:Rich -->
<p>This package contains a tutorial on developing web applications using python-mpservlets.
</p>
-Des:
##----------------------------------------
=Pkg: python-mutagen 1.14 1.17 x86_64
=Sum: Python module to Handle Audio Metadata
+Des:
<!-- DT:Rich -->
<p>Mutagen is a Python module to handle audio metadata.
It supports FLAC, M4A, MP3, Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, and WavPack
audio files. All versions of ID3v2 are supported, and all standard ID3v2.4
frames are parsed. It can read Xing headers to accurately calculate the
bitrate and length of MP3s. ID3 and APEv2 tags can be edited regardless of their
audio format. It can also manipulate Ogg streams on an individual packet/page
level.
</p>
-Des:
##----------------------------------------
=Pkg: python-mysql 1.2.2 2.12 x86_64
=Sum: An Interface to the Popular MySQL Database Server for Python
+Des:
<!-- DT:Rich -->
<p>MySQLdb is an interface to the popular MySQL database server for Python.
The design goals are:
<ul>
<li>Compliance with the Python database API version 2.0
</li><li>Thread-safety
</li><li>Thread-friendliness (threads will not block each other)
</li><li>Compatibility with MySQL-3.23 and later
</li></ul>
This module should be mostly compatible with an older interface
written by Joe Skinner and others. However, the older version is
a) not thread-friendly, b) written for MySQL 3.21, and c) apparently
not actively maintained. No code from that version is used in
MySQLdb. MySQLdb is free software.
</p>
-Des:
##----------------------------------------
=Pkg: python-newt 0.52.10 1.32.1 x86_64
=Sum: Python bindings for newt
+Des:
<!-- DT:Rich -->
<p>The newt-python package contains the Python bindings for the newt library providing a python API for creating text mode interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: python-ogg 1.3 171.8 x86_64
=Sum: Python bindings for libogg
+Des:
<!-- DT:Rich -->
<p>This is an object-oriented Python binding for the ogg library.
</p>
-Des:
##----------------------------------------
=Pkg: python-opengl 2.0.1.09 51.20 x86_64
=Sum: OpenGL bindings for Python
+Des:
<!-- DT:Rich -->
<p>OpenGL bindings for Python including support for GL extensions, GLU, WGL, GLUT, GLE, and Tk.
</p>
-Des:
##----------------------------------------
=Pkg: python-opensync 0.22 150.21 x86_64
=Sum: Python bindings for OpenSync
+Des:
<!-- DT:Rich -->
<p>OpenSync is a synchronization framework that is platform and distribution independent.
It consists of several plug-ins that can be used to connect to devices, a powerful sync engine, and the framework itself.
The synchronization framework is kept very flexible and is capable of synchronizing any type of data, including contacts, calendar, tasks, notes, and files.
</p><p>
To sync various sources, additionally install the plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: python-orbit-devel 2.14.3 137.26 x86_64
=Sum: Headers for python-orbit
+Des:
<!-- DT:Rich -->
<p>Headers for python-orbit
</p>
-Des:
##----------------------------------------
=Pkg: python-pexpect 2.3 23.17 x86_64
=Sum: Pure Python Expect-like module
+Des:
<!-- DT:Rich -->
<p>Pexpect is a pure Python module for spawning child applications; controlling
them; and responding to expected patterns in their output.
</p>
-Des:
##----------------------------------------
=Pkg: python-pisock 0.12.3 2.26 x86_64
=Sum: Pilot-Link Library for Palm devices - Python bindings
+Des:
<!-- DT:Rich -->
<p>Pilot-Link Library for Palm Devices.
</p><p>
This package contains the python bindings of libpisock.
</p>
-Des:
##----------------------------------------
=Pkg: python-ply 2.5 1.17 x86_64
=Sum: Lex and Yacc-like tools written in Python
+Des:
<!-- DT:Rich -->
<p>PLY is yet another implementation of lex and yacc for Python. Although
several other parsing tools are available for Python, there are
several reasons why you might want to take a look at PLY:<ul>
<li>It uses LR-parsing which is reasonably efficient and well suited for
larger grammars.
</li><li>PLY provides most of the standard lex/yacc features including
support for empty productions, precedence rules, error recovery, and
support for ambiguous grammars.
</li><li>PLY is extremely easy to use and provides very extensive error
checking.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-ply-doc 2.5 1.17 x86_64
=Sum: Lex and Yacc-like tools written in Python
+Des:
<!-- DT:Rich -->
<p>PLY is yet another implementation of lex and yacc for Python. Although
several other parsing tools are available for Python, there are
several reasons why you might want to take a look at PLY:<ul>
<li>It uses LR-parsing which is reasonably efficient and well suited for
larger grammars.
</li><li>PLY provides most of the standard lex/yacc features including
support for empty productions, precedence rules, error recovery, and
support for ambiguous grammars.
</li><li>PLY is extremely easy to use and provides very extensive error
checking.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-pybluez 0.15 3.22 x86_64
=Sum: A Python Bluetooth wrapper
+Des:
<!-- DT:Rich -->
<p>PyBluez is an effort to create python wrappers around system
Bluetooth resources to allow Python developers to easily and
quickly create Bluetooth applications.
</p>
-Des:
##----------------------------------------
=Pkg: python-pygame 1.8.1 1.33 x86_64
=Sum: A Python Module for Interfacing with the SDL Multimedia Library
+Des:
<!-- DT:Rich -->
<p>Pygame is a Python wrapper module for the SDL multimedia library.
It contains Python functions and classes that allow you to use
SDL&#39;s support for playing CD-ROMs, audio and video output, and keyboard,
mouse and joystick input. Pygame also includes support for the Numerical
Python extension. Pygame is the successor to the pySDL wrapper project,
written by Mark Baker.
</p>
-Des:
##----------------------------------------
=Pkg: python-pygame-doc 1.8.1 1.33 x86_64
=Sum: Pygame documentation and example programs
+Des:
<!-- DT:Rich -->
<p>Pygame is a Python wrapper module for the SDL multimedia library.
It contains python functions and classes that will allow you to use
SDL&#39;s support for playing cdroms, audio and video output, and keyboard,
mouse and joystick input. pygame also includes support for the Numerical
Python extension. pygame is the successor to the pySDL wrapper project,
written by Mark Baker.
</p>
-Des:
##----------------------------------------
=Pkg: python-pyx 0.10 1.17 x86_64
=Sum: Python graphics package
+Des:
<!-- DT:Rich -->
<p>Python package for the creation of encapsulated PostScript figures. It provides both an abstraction of PostScript and a TeX/LaTeX interface. Complex tasks like 2d and 3d plots in publication-ready quality are built out of these primitives.
</p>
-Des:
##----------------------------------------
=Pkg: python-qscintilla 2.3.2 1.23 x86_64
=Sum: Python  Bindings for the C++ Editor Class Library
+Des:
<!-- DT:Rich -->
<p>QScintilla is a Qt port of Neil Hodgson&#39;s Scintilla C++ editor class.
</p><p>
This is a Qt port from the original Scintilla class (http://www.scintilla.org/).
</p><p>
This package is mainly used by eric, the Python IDE.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt 3.17.6 1.25 x86_64
=Sum: Python Bindings for Qt
+Des:
<!-- DT:Rich -->
<p>Needed libraries for writing GUI applications using Qt in Python.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt4-devel 4.6.2 0.1.87 x86_64
=Sum: PyQt - python bindings for Qt 4
+Des:
<!-- DT:Rich -->
<p>PyQt is a set of Python bindings for Trolltech&#39;s Qt application framework and runs on all platforms supported by Qt including Windows, MacOS/X and Linux. There are two sets of bindings: PyQt v4 supports Qt v4; and the older PyQt v3 supports Qt v3 and earlier. The bindings are implemented as a set of Python modules and contain over 300 classes and nearly 6,000 functions and methods.
</p>
-Des:
##----------------------------------------
=Pkg: python-rrdtool 1.3.4 2.8 x86_64
=Sum: Python bindings for rrdtool
+Des:
<!-- DT:Rich -->
<p>A tool to log and analyze data gathered from
all kinds of data sources. The data analysis
part of RRDtool is based on the ability to quickly
generate graphical representations of the data values
collected over a definable time period.
</p><p>
This package contains the Python bindings
</p>
-Des:
##----------------------------------------
=Pkg: python-scgi 1.12 1.19 x86_64
=Sum: Python implementation of the SCGI protocol.
+Des:
<!-- DT:Rich -->
<p>The SCGI protocol is a replacement for the Common Gateway Interface (CGI)
protocol. It is a standard for applications to interface with HTTP servers.
It is similar to FastCGI but is designed to be easier to implement.
</p><p>
This package contains the python bindings.
</p>
-Des:
##----------------------------------------
=Pkg: python-selinux 2.0.71 3.25 x86_64
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: python-semanage 2.0.27 4.14 x86_64
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux® kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement®, Role-based Access
Control, and Multi-level Security.
</p><p>
libsemanage provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: python-serial 2.4 1.17 x86_64
=Sum: Python Serial Port Extension
+Des:
<!-- DT:Rich -->
<p>This module encapsulates the access for the serial port. It provides backends
for Python running on Windows, Linux, BSD (possibly any POSIX compliant system) and Jython. The module named &quot;serial&quot; automatically selects the
appropriate backend.
</p>
-Des:
##----------------------------------------
=Pkg: python-setuptools 0.6c8 10.17 x86_64
=Sum: Download, build, install, upgrade, and uninstall Python packages -- easily!
+Des:
<!-- DT:Rich -->
<p>setuptools is a collection of enhancements to the Python distutils that allow you to more easily build and distribute Python packages, especially ones that have dependencies on other packages.
</p>
-Des:
##----------------------------------------
=Pkg: python-sip-devel 4.9.2 0.1.59 x86_64
=Sum: SIP tool to create python bindings
+Des:
<!-- DT:Rich -->
<p>SIP is a tool that makes it very easy to create Python bindings for C and C++ libraries. It was originally developed to create PyQt, the Python bindings for the Qt toolkit, but can be used to create bindings for any C or C++ library.
</p>
-Des:
##----------------------------------------
=Pkg: python-tk 2.6.0 8.9.28 x86_64
=Sum: TkInter - Python Tk Interface
+Des:
<!-- DT:Rich -->
<p>Python interface to Tk. Tk is the GUI toolkit that comes with Tcl.
The &quot;xrpm&quot; package uses this Python interface.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted 8.0.1 1.22 x86_64
=Sum: Event-driven networking framework in Python
+Des:
<!-- DT:Rich -->
<p>A Development Tool
<hr>
Twisted is a framework, written in Python, for writing networked applications. It includes implementations of a number of commonly used network services such as a web server, an IRC chat server, a mail server, a relational database interface and an object broker. Developers can build applications using all of these services as well as custom services that they write themselves. Twisted also includes a user authentication system that controls access to services and provides services with user context information to implement their own security models.
</p><p>
Twisted provides important features needed for networking programming, both at the high and low levels:
</p><p>
Pluggable event loops allowing the developer to take advantage of platform-specific capabilities.
Abstractions of protocols and transports.
Through Twisted Spread, mechanisms for network encoding of data (in Python, Java, ELisp, and other languages), to a full-blown distributed object system.
</p><p>
An Integrated Environment
<hr>
Twisted is an integration point for network services that were previously unable to interoperate. Services within a Twisted server can communicate with each other and share information providing a very integrated programming environment that can re-use large amounts of infrastructure across multiple network mediums (such as chat, web, and mail).
</p><p>
As well as servers, Twisted supports several different kinds of clients and GUIs. This means that the client can re-use large portions of the server&#39;s code, improving test coverage and reliability while reducing code size.
</p><p>
An Application Suite
<hr>
Twisted is a collection of servers and clients, which can be used either by developers of new applications or directly. For example an easy to run web server is available out of the box as an application for the desktop user, but it is also a framework for developers to use.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-conch 8.1.0 1.22 x86_64
=Sum: Twisted Conch
+Des:
<!-- DT:Rich -->
<p>Conch is an SSHv2 implementation written in Python. SSH is a protocol designed to allow remote access to shells and commands, but it is generic enough to allow everything from TCP forwarding to generic filesystem access. Since conch is written in Python, it interfaces well with other Python projects, such as Imagination. Conch also includes a implementations of the telnet and vt102 protocols, as well as support for rudamentary line editing behaviors. A new implementation of Twisted&#39;s Manhole application is also included, featuring server-side input history and interactive syntax coloring.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-doc 8.0.1 1.22 x86_64
=Sum: Documentation for python-twisted
+Des:
<!-- DT:Rich -->
<p>Twisted is an event-based framework for internet applications.  It includes a
web server, a telnet server, a chat server, a news server, a generic client
and server for remote object access, and APIs for creating new protocols and
services. Twisted supports integration of the Tk, GTK+, GTK+ 2, Qt, Mac OS X,
or wxPython event loop with its main event loop. The Win32 event loop
is also supported. Twisted works with all Python 2.2 and 2.3 versions.
</p><p>
python-twisted-doc contains the documentation for python-twisted.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-lore 8.0.0 1.22 x86_64
=Sum: Twisted Lore
+Des:
<!-- DT:Rich -->
<p>Documentation generator with HTML and LaTeX support
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-mail 8.0.0 1.22 x86_64
=Sum: Twisted Mail
+Des:
<!-- DT:Rich -->
<p>Twisted Mail contains high-level, efficient protocol implementations for both clients and servers of SMTP, POP3, and IMAP4. Additionally, it contains an &quot;out of the box&quot; combination SMTP/POP3 virtual-hosting mail server. Also included is a read/write Maildir implementation and a basic Mail Exchange calculator (depends on Twisted Names).
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-names 8.0.0 1.22 x86_64
=Sum: Twisted Names
+Des:
<!-- DT:Rich -->
<p>Twisted Names is both a domain name server as well as a client resolver library. Twisted Names comes with an &quot;out of the box&quot; nameserver which can read most BIND-syntax zone files as well as a simple Python-based configuration format. Twisted Names can act as an authoritative server, perform zone transfers from a master to act as a secondary, act as a caching nameserver, or any combination of these. Twisted Names&#39; client resolver library provides functions to query for all commonly used record types as well as a replacement for the blocking gethostbyname() function provided by the Python stdlib socket module.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-news 8.0.0 1.22 x86_64
=Sum: Twisted News
+Des:
<!-- DT:Rich -->
<p>Twisted News provides a very basic NNTP server, as well as an NNTP client protocol implementation. Two messages storage systems are supported: the DB-API 2.0 backend stores and indexes messages in any compatible SQL database; the Twisted dirdbm backend uses serialized Python objects stored directly on the filesystem for message storage. Twisted News also has very rudamentary support for moderated groups.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-runner 8.0.0 1.22 x86_64
=Sum: Twisted Runner
+Des:
<!-- DT:Rich -->
<p>Runner has process management, including an inetd replacement.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-web 8.0.0 1.22 x86_64
=Sum: Twisted Web
+Des:
<!-- DT:Rich -->
<p>An HTTP protocol implementation together with clients and servers.
</p>
-Des:
##----------------------------------------
=Pkg: python-twisted-words 8.0.0 1.22 x86_64
=Sum: Twisted Words
+Des:
<!-- DT:Rich -->
<p>Twisted Words has more chat than you can handle.
</p>
-Des:
##----------------------------------------
=Pkg: python-vorbis 1.5a 2.10 x86_64
=Sum: Python bindings for libvorbis
##----------------------------------------
=Pkg: python-wxGTK 2.8.8.1 1.36 x86_64
=Sum: Cross Platform GUI Toolkit for Python Using wxGTK
+Des:
<!-- DT:Rich -->
<p>wxPython is a GUI toolkit for Python that is a wrapper around the
wxWidgets C++ GUI library.  wxPython provides a large variety of
window types and controls, all implemented with a native look and feel
(and native runtime speed) on the platforms it is supported on.
</p><p>
Additional documentation is available in package <a href="pkg://python-wxGTK-doc">python-wxGTK-doc</a> and
demos and examples are in package <a href="pkg://python-wxGTK-examples">python-wxGTK-examples</a>.
</p>
-Des:
##----------------------------------------
=Pkg: python-wxGTK-doc 2.8.8.1 1.17 x86_64
=Sum: wxPython Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains wxPython (package <a href="pkg://python-wxGTK">python-wxGTK</a>) documentation.
</p>
-Des:
##----------------------------------------
=Pkg: python-wxGTK-examples 2.8.8.1 1.17 x86_64
=Sum: wxPython Demos and Examples
+Des:
<!-- DT:Rich -->
<p>This package contains wxPython (package <a href="pkg://python-wxGTK">python-wxGTK</a>) demos and examples.
</p>
-Des:
##----------------------------------------
=Pkg: python-xdg 0.16 2.17 x86_64
=Sum: Python library to access freedesktop.org standards
+Des:
<!-- DT:Rich -->
<p>python-xdg (PyXDG) is a python library to access freedesktop.org standards.
</p><p>
Currently supported are:<ul>
<li>Base Directory Specification Version 0.6
</li><li>Menu Specification Version 1.0-draft1
</li><li>Desktop Entry Specification Version 0.9.4
</li><li>Icon Theme Specification Version 0.8
</li><li>Recent File Spec 0.2
</li><li>Shared-MIME-Database Specification 0.13
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: python-xlib 0.14 2.8 x86_64
=Sum: Python X11 interface
+Des:
<!-- DT:Rich -->
<p>The Python X Library is intended to be a fully functional X client library for Python programs.
</p>
-Des:
##----------------------------------------
=Pkg: python-xmldiff 0.6.8 30.8 x86_64
=Sum: Python Tool for Detecting Differences Between XML Files
+Des:
<!-- DT:Rich -->
<p>XMLdiff shows the differences between two similar XML files in the same way &#39;diff&#39; does with text files.
It can also be used as a library or as a command line tool and can work either with XML files or DOM trees.
The implementation is based on &quot;Change detection in hierarchically
structured information&quot;, by S. Chawathe, A. Rajaraman, H. Garcia-Molina,
and J. Widom, Stanford University, 1996.
</p>
-Des:
##----------------------------------------
=Pkg: python-yui 0.1.0 5.26 x86_64
=Sum: Python bindings for yast2-libyui
+Des:
<!-- DT:Rich -->
<p>This package provides Python language bindings to access functions of yast2-libyui - the YaST User Interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p>
-Des:
##----------------------------------------
=Pkg: python-zopeinterface 3.3.0 79.17 x86_64
=Sum: Python library for API definitions through interfaces
+Des:
<!-- DT:Rich -->
<p>Interfaces are objects that specify (document) the external behavior of objects that &quot;provide&quot; them. An interface specifies behavior through:
<ul>
<li>informal documentation in a doc string

</li><li>attribute definitions

</li><li>invariants, which are conditions that must hold for objects that provide the interface
</li></ul>
This is a separate distribution of the zope.interface package used in Zope 3.
</p>
-Des:
##----------------------------------------
=Pkg: python-zypp 0.5.3 1.2.30 x86_64
=Sum: Python Bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides Python bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: pythoncad DS1_R36 192.33 x86_64
=Sum: PythonCAD--CAD in Python
+Des:
<!-- DT:Rich -->
<p>PythonCAD is a CAD package written in Python. The PythonCAD project aims to produce a scriptable, open source, and easy to use CAD package.
</p><p>
Start it with gtkpycad.py from the command line.
</p>
-Des:
##----------------------------------------
=Pkg: qemu 0.10.1 0.1.1 x86_64
=Sum: Emulateur de CPU universel
+Des:
<!-- DT:Rich -->
<p>QEMU is an extremely well-performing CPU emulator that allows you to choose between simulating an entire system and running userspace binaries for different architectures under your native operating system. It currently emulates x86, ARM, PowerPC and SPARC CPUs as well as PC and PowerMac systems.
</p>
-Des:
##----------------------------------------
=Pkg: qperf 0.4.6 0.1.42 x86_64
=Sum: Measure socket and RDMA performance
+Des:
<!-- DT:Rich -->
<p>Measure socket and RDMA performance.
</p>
-Des:
##----------------------------------------
=Pkg: qt-creator 1.2.1 3.1.79 x86_64
=Sum: Lightweight IDE
+Des:
<!-- DT:Rich -->
<p>Qt Creator is a new, lightweight, cross-platform integrated development
environment (IDE) designed to make development with the Qt application
framework even faster and easier.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel 3.3.8b 88.21 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>You need this package if you want to compile programs with Qt 3. It
contains the &quot;Qt Crossplatform Development Kit 2&quot;. Under /usr/lib/qt3
you will find include files.
</p><p>
You need a license for using Qt with a non-GPL application. A license can be acquired at sales@trolltech.com.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel-32bit 3.3.8b 88.21 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>You need this package if you want to compile programs with Qt 3. It
contains the &quot;Qt Crossplatform Development Kit 2&quot;. Under /usr/lib/qt3
you will find include files.
</p><p>
You need a license for using Qt with a non-GPL application. A license can be acquired at sales@trolltech.com.
</p>
-Des:
##----------------------------------------
=Pkg: qt3-devel-tools 3.3.8b 88.21 x86_64
=Sum: User Interface Builder and other tools (designer, assistant, linguist)
+Des:
<!-- DT:Rich -->
<p>The designer creates .ui files. The uic generates C++ code from these files.
The package also contains the Qt Assistant (Qt documentation browser) and the Qt Linguist (for translations).
</p>
-Des:
##----------------------------------------
=Pkg: qtc 0.7a 134.25 x86_64
=Sum: C Bindings for Qt
+Des:
<!-- DT:Rich -->
<p>This package contains needed libraries to write applications in plain C (not C++) for Qt.
</p>
-Des:
##----------------------------------------
=Pkg: quagga 0.99.15 0.1.55 x86_64
=Sum: Free Routing Software (for BGP, OSPF and RIP, for example)
+Des:
<!-- DT:Rich -->
<p>Quagga is a routing software suite, providing implementations of OSPFv2, OSPFv3, RIP v1 and v2, RIPv3 and BGPv4 for Unix platforms, particularly FreeBSD and Linux and also NetBSD, to mention a few. Quagga is a fork of GNU Zebra which was developed by Kunihiro Ishiguro. The Quagga tree aims to build a more involved community around Quagga than the current centralised model of GNU Zebra.
</p>
-Des:
##----------------------------------------
=Pkg: quagga-devel 0.99.15 0.1.55 x86_64
=Sum: Free Routing Software (for BGP, OSPF and RIP, for example)
+Des:
<!-- DT:Rich -->
<p>Quagga is a routing software suite, providing implementations of OSPFv2, OSPFv3, RIP v1 and v2, RIPv3 and BGPv4 for Unix platforms, particularly FreeBSD and Linux and also NetBSD, to mention a few. Quagga is a fork of GNU Zebra which was developed by Kunihiro Ishiguro. The Quagga tree aims to build a more involved community around Quagga than the current centralised model of GNU Zebra.
</p>
-Des:
##----------------------------------------
=Pkg: quilt 0.47 15.10 x86_64
=Sum: A Tool for Working with Many Patches
+Des:
<!-- DT:Rich -->
<p>Quilt allows you to easily manage large numbers of patches by
keeping track of the changes each patch makes. Patches can be
applied, un-applied, refreshed, and more.
</p><p>
Quilt originally was based on Andrew Morton&#39;s patch scripts
found at http://www.zip.com.au/~akpm/linux/patches/.
</p>
-Des:
##----------------------------------------
=Pkg: raptor 1.4.18 28.21 x86_64
=Sum: Raptor RDF Parser Toolkit
+Des:
<!-- DT:Rich -->
<p>Raptor is the RDF Parser Toolkit for Redland that provides
a set of standalone RDF parsers, generating triples from RDF/XML
or N-Triples.
</p>
-Des:
##----------------------------------------
=Pkg: rarian-devel 0.8.1 5.16 x86_64
=Sum: Development files for rarian
+Des:
<!-- DT:Rich -->
<p>Rarian is designed to be a replacement for scrollkeeper.  It is
currently undergoing heavy development.  As of writing, rarian can be
installed in place of scrollkeeper and everything will work okay.
</p><p>
This package contains the files for developing applications using rarian.
</p>
-Des:
##----------------------------------------
=Pkg: rcs 5.7 1005.22 x86_64
=Sum: Revision Control System
+Des:
<!-- DT:Rich -->
<p>RCS, the Revision Control System, manages multiple revisions of files.
RCS can store, retrieve, log, identify, and merge revisions. It is
useful for files that are frequently revised, for example: programs,
documentation, graphics, and papers.
</p>
-Des:
##----------------------------------------
=Pkg: readline-devel-32bit 5.2 147.9.13 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: readline-devel 5.2 147.9.13 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: recode-devel 3.6 635.18 x86_64
=Sum: Character Set Converter
+Des:
<!-- DT:Rich -->
<p>This package converts various character sets.
</p>
-Des:
##----------------------------------------
=Pkg: regina 3.4 0.1.48 x86_64
=Sum: The Regina REXX Interpreter
+Des:
<!-- DT:Rich -->
<p>Mark Hessling&#39;s implementation of the REXX language.
</p>
-Des:
##----------------------------------------
=Pkg: release-notes-sdk 11.1 0.2.21 x86_64
=Sum: A short description of the most Important changes for this SUSE Linux Enterprise Software Development Kit
+Des:
<!-- DT:Rich -->
<p>This package contains files with the most important changes for this SUSE Linux Enterprise Software Development Kit. They can be found below the /usr/share/doc/release-notes directory.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-32bit 4.4.2.3 37.16.37 x86_64
=Sum: The RPM Package Manager
+Des:
<!-- DT:Rich -->
<p>RPM Package Manager is the main tool for managing the software packages
of the SuSE Linux distribution.
</p><p>
RPM can be used to install and remove software packages. With rpm, it is easy
to update packages.  RPM keeps track of all these manipulations in a central
database.  This way it is possible to get an overview of all installed
packages.  RPM also supports database queries.
</p>
-Des:
##----------------------------------------
=Pkg: rpm-devel 4.4.2.3 37.16.37 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains the RPM C library and header files.  These
development files will simplify the process of writing programs
which manipulate RPM packages and databases and are intended to make
it easier to create graphical package managers or any other tools
that need an intimate knowledge of RPM packages in order to function.
</p>
-Des:
##----------------------------------------
=Pkg: rpmlint-Factory 1.0 44.21 x86_64
=Sum: Rpm correctness checker - Factory configuration
+Des:
<!-- DT:Rich -->
<p>Rpmlint is a tool to check common errors on rpm packages.
This package provides the configuration specific for SUSE Factory.
</p>
-Des:
##----------------------------------------
=Pkg: rpmlint-mini 1.0 214.33.70 x86_64
=Sum: Rpm correctness checker
+Des:
<!-- DT:Rich -->
<p>Rpmlint is a tool to check common errors on rpm packages.
Binary and source packages can be checked.
</p>
-Des:
##----------------------------------------
=Pkg: rrdtool-devel 1.3.4 2.8 x86_64
=Sum: A tool for data logging and analysis - Development files
+Des:
<!-- DT:Rich -->
<p>A tool to log and analyze data gathered from
all kinds of data sources. The data analysis
part of RRDtool is based on the ability to quickly
generate graphical representations of the data values
collected over a definable time period.
</p>
-Des:
##----------------------------------------
=Pkg: rsvg2-sharp 2.26.0 2.2.7 x86_64
=Sum: Mono bindings for rsvg
+Des:
<!-- DT:Rich -->
<p>This package contains Mono bindings for librsvg.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-devel 1.8.7.p72 5.24.2 x86_64
=Sum: Development files to link against Ruby
+Des:
<!-- DT:Rich -->
<p>Development files to link against Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-doc-html 1.8.7.p72 5.24.2 x86_64
=Sum: This package contains the HTML docs for ruby
+Des:
<!-- DT:Rich -->
<p>This package contains the HTML docs for ruby
</p>
-Des:
##----------------------------------------
=Pkg: ruby-doc-ri 1.8.7.p72 5.24.2 x86_64
=Sum: Ruby Interactive Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains the RI docs for ruby
</p>
-Des:
##----------------------------------------
=Pkg: ruby-examples 1.8.7.p72 5.24.2 x86_64
=Sum: Example scripts for ruby
+Des:
<!-- DT:Rich -->
<p>Example scripts for ruby
</p>
-Des:
##----------------------------------------
=Pkg: ruby-fcgi 0.8.7 2.11 x86_64
=Sum: FastCGI bindings for ruby
+Des:
<!-- DT:Rich -->
<p>FastCGI is a language independent, scalable, open extension to CGI that
provides high performance without the limitations of server specific APIs.
</p><p>
This package provides bindings for the ruby language.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-mysql 2.7.4 2.11 x86_64
=Sum: MySQL bindings for Ruby
+Des:
<!-- DT:Rich -->
<p>This is the MySQL API module for Ruby. It provides the same functions for Ruby programs that the MySQL C API provides for C programs.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-satsolver 0.14.17 0.2.18 x86_64
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: ruby-selinux 2.0.71 3.25 x86_64
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-test-suite 1.8.7.p72 5.24.2 x86_64
=Sum: An Interpreted Object-Oriented Scripting Language
+Des:
<!-- DT:Rich -->
<p>Ruby is an interpreted scripting language for quick and
easy object-oriented programming.  It has many features for
processing text files and performing system management tasks (as in
Perl).  It is simple, straight-forward, and extensible.
<ul>
<li>Ruby features:

</li><li>Simple Syntax
</li><li>*Normal* Object-Oriented features (class, method calls, for example)
</li><li>*Advanced* Object-Oriented features(Mix-in, Singleton-method, for example)
</li><li>Operator Overloading
</li><li>Exception Handling
</li><li>Iterators and Closures
</li><li>Garbage Collection
</li><li>Dynamic Loading of Object Files (on some architectures)
</li><li>Highly Portable (works on many UNIX machines; DOS, Windows, Mac, BeOS, and more)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: ruby-tk 1.8.7.p72 5.24.2 x86_64
=Sum: TCL/TK bindings for Ruby
+Des:
<!-- DT:Rich -->
<p>TCL/TK bindings for Ruby
</p>
-Des:
##----------------------------------------
=Pkg: ruby-yui 0.1.0 5.26 x86_64
=Sum: Ruby bindings for yast2-libyui
+Des:
<!-- DT:Rich -->
<p>This package provides Ruby language bindings to access functions of yast2-libyui - the YaST User Interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p>
-Des:
##----------------------------------------
=Pkg: ruby-zypp 0.5.3 1.2.30 x86_64
=Sum: Ruby bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides ruby bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: ruby-zypptools 0.2.0 1.26 x86_64
=Sum: Tools for ZYpp
+Des:
<!-- DT:Rich -->
<p>Tools for ZYpp
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-abstract 1.0.0 2.20 x86_64
=Sum: A library which enable you to define abstract method in Ruby
+Des:
<!-- DT:Rich -->
<p>&#39;abstract.rb&#39; is a library which enable you to define abstract method in Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-actionmailer-2_1 2.1.2 1.1 x86_64
=Sum: Mail service classes for Ruby on Rails
+Des:
<!-- DT:Rich -->
<p>Simplifies the creation of mail service classes that uses Action View (from
Action Pack) to render the body templates.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-actionmailer-2_3 2.3.5 1.1.39 x86_64
=Sum: Mail service classes for Ruby on Rails
+Des:
<!-- DT:Rich -->
<p>Simplifies the creation of mail service classes that uses Action View (from
Action Pack) to render the body templates.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-actionpack-2_1 2.1.2 1.4.1 x86_64
=Sum: Eases web-request routing, handling, and response
+Des:
<!-- DT:Rich -->
<p>Eases web-request routing, handling, and response as a half-way front, half-way
page controller. Implemented with specific emphasis on enabling easy
unit/integration testing that doesn&#39;t require a browser.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-actionpack-2_3 2.3.5 2.2.26 x86_64
=Sum: Eases web-request routing, handling, and response
+Des:
<!-- DT:Rich -->
<p>Eases web-request routing, handling, and response as a half-way front, half-way
page controller. Implemented with specific emphasis on enabling easy
unit/integration testing that doesn&#39;t require a browser.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activerecord-2_1 2.1.2 1.2 x86_64
=Sum: Implements the ActiveRecord pattern (Fowler, PoEAA) for ORM
+Des:
<!-- DT:Rich -->
<p>Implements the ActiveRecord pattern (Fowler, PoEAA) for ORM. It ties database
tables and classes together for business objects, like Customer or
Subscription, that can find, save, and destroy themselves without resorting to
manual SQL.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activerecord-2_3 2.3.5 1.1.38 x86_64
=Sum: Implements the ActiveRecord pattern (Fowler, PoEAA) for ORM
+Des:
<!-- DT:Rich -->
<p>Implements the ActiveRecord pattern (Fowler, PoEAA) for ORM. It ties database
tables and classes together for business objects, like Customer or
Subscription, that can find, save, and destroy themselves without resorting to
manual SQL.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activeresource-2_1 2.1.2 1.2 x86_64
=Sum: Think Active Record for web resources
+Des:
<!-- DT:Rich -->
<p>Wraps web resources in model classes that can be manipulated through XML over
REST.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activeresource-2_3 2.3.5 1.1.37 x86_64
=Sum: Think Active Record for web resources
+Des:
<!-- DT:Rich -->
<p>Wraps web resources in model classes that can be manipulated through XML over
REST.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activesupport-2_1 2.1.2 1.3.1 x86_64
=Sum: Utility classes and extension to the standard library
+Des:
<!-- DT:Rich -->
<p>Utility classes and extension to the standard library that were required by
Rails, but found of general use.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-activesupport-2_3 2.3.5 1.1.40 x86_64
=Sum: Utility classes and extension to the standard library
+Des:
<!-- DT:Rich -->
<p>Utility classes and extension to the standard library that were required by
Rails, but found of general use.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-daemons 1.0.10 0.1.38 x86_64
=Sum: Easy way to convert selfwritten servers into daemons
+Des:
<!-- DT:Rich -->
<p>Daemons provides an easy way to wrap existing ruby scripts (for example a
self-written server) to be run as a daemon and to be controlled by simple
start/stop/restart commands.
</p><p>
If you want, you can also use daemons to run blocks of ruby code in a daemon
process and to control these processes from the main application.
</p><p>
Besides this basic functionality, daemons offers many advanced features like
exception backtracing and logging (in case your ruby script crashes) and
monitoring and automatic restarting of your processes if they crash.
</p><p>
Daemons includes the daemonize.rb script written by Travis Whitton to do the
daemonization process.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-delayed_job 1.8.4 0.1.38 x86_64
=Sum: Database-backed asynchronous priority queue system -- Extracted from Shopify
+Des:
<!-- DT:Rich -->
<p>Delayed_job (or DJ) encapsulates the common pattern of asynchronously executing longer tasks in the background. It is a direct extraction from Shopify where the job table is responsible for a multitude of core tasks.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-erubis 2.6.5 0.2.25 x86_64
=Sum: Erubis is a pure Ruby implementation of eRuby
+Des:
<!-- DT:Rich -->
<p>Erubis is a pure Ruby implementation of eRuby. It has the following features.
<ul>
<li>Very fast, almost three times faster than ERB and even as fast as eruby
(implemented in C)
</li><li>Auto escaping (sanitizing) support
</li><li>Auto trimming spaces around &#39;&lt;% %&gt;&#39;
</li><li>Embedded pattern changeable (default &#39;&lt;% %&gt;&#39;)
</li><li>Multi-language support (Ruby/PHP/C/Java/Scheme/Perl/Javascript)
</li><li>Context object available and easy to combine eRuby template with YAML
datafile
</li><li>Easy to expand in subclass, for example:
</li><li>Print statement support
</li><li>Lines starting with percent character (&#39;%&#39;) support
</li><li>Another embedded pattern support
</li><li>etc...
</li></ul>
Erubis supports not only Ruby but also PHP, C, Java, Scheme, Perl, and
Javascript. You can embed these language code into your document and compile it
into target program code.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-exception_notification 1.0.20090728 0.1.38 x86_64
=Sum: Gemified exception_notification rails plugin, compatible with Rails 2.3
+Des:
<!-- DT:Rich -->
<p>Gemified exception_notification rails plugin, compatible with Rails 2.3
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-gemcutter 0.3.0 0.2.25 x86_64
=Sum: Commands to interact with gemcutter.org
+Des:
<!-- DT:Rich -->
<p>Adds several commands to RubyGems for managing gems and more on Gemcutter.org.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-gruff 0.3.6 0.1.38 x86_64
=Sum: Beautiful graphs for one or multiple datasets
+Des:
<!-- DT:Rich -->
<p>Beautiful graphs for one or multiple datasets. Can be used on websites or in documents.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-hoe 2.5.0 0.2.26 x86_64
=Sum: Hoe is a rake/rubygems helper for project Rakefiles
+Des:
<!-- DT:Rich -->
<p>Hoe is a rake/rubygems helper for project Rakefiles. It helps generate
rubygems and includes a dynamic plug-in system allowing for easy
extensibility. Hoe ships with plug-ins for all your usual project
tasks including rdoc generation, testing, packaging, and deployment.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-json_pure 1.2.0 0.2.25 x86_64
=Sum: This is a JSON implementation in pure Ruby
+Des:
<!-- DT:Rich -->
<p>This is a JSON implementation in pure Ruby
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-libxml-ruby 1.1.3 0.1.37 x86_64
=Sum: Debug sources for package rubygem-libxml-ruby
+Des:
<!-- DT:Rich -->
<p>This package provides debug sources for package rubygem-libxml-ruby.
Debug sources are useful when developing applications that use this
package or when debugging this package.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-pg 0.7.9.2008.03.18 2.20 x86_64
=Sum: An extension library to access a PostgreSQL database from Ruby
+Des:
<!-- DT:Rich -->
<p>An extension library to access a PostgreSQL database from Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-polkit 0.1.0 0.4.33 x86_64
=Sum: Ruby bindings for PolicyKit
+Des:
<!-- DT:Rich -->
<p>This extension provides PolicyKit integration. The library provides a stable API for applications to use the authorization policies from PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-postgres 0.7.9.2008.01.28 2.20 x86_64
=Sum: An extension library to access a PostgreSQL database from Ruby
+Des:
<!-- DT:Rich -->
<p>An extension library to access a PostgreSQL database from Ruby.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rack 1.0.1 1.1.40 x86_64
=Sum: Minimal interface between webservers supporting Ruby and Ruby frameworks
+Des:
<!-- DT:Rich -->
<p>Rack provides minimal, modular and adaptable interface for developing web
applications in Ruby.  By wrapping HTTP requests and responses in the simplest
way possible, it unifies and distills the API for web servers, web frameworks,
and software in between (the so-called middleware) into a single method call.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rails-2_3 2.3.5 1.1.39 x86_64
=Sum: A web-application framework for the MVC pattern
+Des:
<!-- DT:Rich -->
<p>Rails is a web-application framework for the MVC pattern that includes both a
template engine, controller framework, and object-relational mapping package.
Everything needed to develop web-apps that can run on CGI, FastCGI, and
mod_ruby.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rake 0.8.7 0.1.4 x86_64
=Sum: Ruby Make
+Des:
<!-- DT:Rich -->
<p>This package contains Rake, a simple ruby build program with
capabilities similar to make.
</p><p>
Rake has the following features:
<ul>
<li>Rakefiles (rake&#39;s version of Makefiles) are completely defined in
standard Ruby syntax.  No XML files to edit.  No quirky Makefile
syntax to worry about (is that a tab or a space?)

</li><li>Users can specify tasks with prerequisites.

</li><li>Rake supports rule patterns to sythesize implicit tasks.

</li><li>Flexible FileLists that act like arrays but know about manipulating
file names and paths.

</li><li>A library of prepackaged tasks to make building rakefiles easier.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: rubygem-rake-compiler 0.7.0 0.2.26 x86_64
=Sum: Rake-based Ruby C Extension task generator
+Des:
<!-- DT:Rich -->
<p>Provide a standard and simplified way to build and package
Ruby C extensions using Rake as glue
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rmagick 2.12.2 0.1.161 x86_64
=Sum: Ruby binding to ImageMagick
+Des:
<!-- DT:Rich -->
<p>RMagick is an interface between Ruby and ImageMagick.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rpam 1.0.1 0.3.32 x86_64
=Sum: PAM (Pluggable Authentication Modules) integration with ruby.
+Des:
<!-- DT:Rich -->
<p>This extension provides PAM (Pluggable Authentication Modules) integration. The library provides a stable API for applications to defer to for authentication tasks.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-rubyforge 2.0.3 0.2.26 x86_64
=Sum: A simplistic script which automates a limited set of rubyforge operations
+Des:
<!-- DT:Rich -->
<p>A simplistic script which automates a limited set of rubyforge operations
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-sqlite3 1.2.4 0.1.3 x86_64
=Sum: A Ruby interface for the SQLite3 database engine
+Des:
<!-- DT:Rich -->
<p>A Ruby interface for the SQLite3 database engine.
</p>
-Des:
##----------------------------------------
=Pkg: rubygem-yard 0.2.3.3 0.5.25 x86_64
=Sum: Documentation tool for consistent and usable documentation in Ruby
+Des:
<!-- DT:Rich -->
<p>YARD is a documentation generation tool for the Ruby programming language.
</p>
-Des:
##----------------------------------------
=Pkg: rubygems 1.3.5 1.1.36 x86_64
=Sum: The Ruby standard for publishing and managing third party libraries
+Des:
<!-- DT:Rich -->
<p>RubyGems is the Ruby standard for publishing and managing third party libraries.
</p>
-Des:
##----------------------------------------
=Pkg: rxvt-unicode 9.05 1.17 x86_64
=Sum: Rxvt X Terminal with Unicode Support
+Des:
<!-- DT:Rich -->
<p>rxvt-unicode is a clone of the well-known terminal emulator rxvt, modified to
store text in Unicode (either UCS-2 or UCS-4) and to use locale-correct input
and output.
It also supports mixing multiple fonts at the same time, including Xft fonts.
</p>
-Des:
##----------------------------------------
=Pkg: sablot 1.0.3 108.18 x86_64
=Sum: XSL Processor
+Des:
<!-- DT:Rich -->
<p>Sablotron is an XSL processor fully implemented in C++. The excellent
Expat parser is used as the associated XML parser.
</p>
-Des:
##----------------------------------------
=Pkg: sablot-devel 1.0.3 108.18 x86_64
=Sum: Header Files and Libraries for Sablot Development
+Des:
<!-- DT:Rich -->
<p>Header files and libraries needed for sablot development.
</p>
-Des:
##----------------------------------------
=Pkg: samba-devel 3.4.3 1.17.2 x86_64
=Sum: Libraries and Header Files to Develop Programs with Samba Support
+Des:
<!-- DT:Rich -->
<p>This package contains the static libraries and header files needed to develop programs which make use of Samba.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: samba4 3.99.90.alpha10 0.2.31 x86_64
=Sum: Samba 4 (alpha release)
+Des:
<!-- DT:Rich -->
<p>An alpha release of Samba 4.
</p>
-Des:
##----------------------------------------
=Pkg: samplekmp-source 1.0 0.3.42 x86_64
=Sum: Sample KMP Source and Packaging Files
+Des:
<!-- DT:Rich -->
<p>This package contains the files to build a sample kernel module package.
</p>
-Des:
##----------------------------------------
=Pkg: sane-backends-32bit 1.0.20 7.1.115 x86_64
=Sum: SANE (Scanner Access Now Easy) Scanner Drivers
+Des:
<!-- DT:Rich -->
<p>The software consists of SANE scanner drivers, &quot;scanimage,&quot;
and the &quot;saned&quot; daemon.
</p><p>
A SANE scanner driver is used via a SANE front-end. This package contains the command line front-end &quot;scanimage&quot;. There are various graphical front-ends like &quot;xscanimage&quot; (package sane-frontends), XSane (package xsane), and the KDE front-end Kooka (package kdegraphics3-scan).
</p><p>
The &quot;saned&quot; daemon provides the service &quot;sane-port&quot; to access scanners that are connected to a server via network from client hosts that run the &quot;net&quot; meta driver.
</p>
-Des:
##----------------------------------------
=Pkg: sane-backends-autoconfig 1.0.20 7.1.115 x86_64
=Sum: USB Scanner Autoconfiguration
+Des:
<!-- DT:Rich -->
<p>USB scanner autoconfiguration happens via udev.
</p><p>
The file /etc/udev/rules.d/56-sane-backends-autoconfig.rules contains entries for those USB scanners where the USB IDs are known, which are supported by a free driver, where the support status is &quot;complete&quot; or &quot;good&quot;, and which do not require firmware upload.
</p><p>
When a USB scanner is connected and its USB IDs match to an entry in the 56-sane-backends-autoconfig.rules file, the matching scanner driver is activated (i.e. the driver line in /etc/sane.d/dll.conf is activated).
</p><p>
It enables scanner drivers but never disables them. The reason is that enabled drivers do not hurt so that an automated disable would make it only overcomplicated because when more than one scanner uses the same driver, a complicated check would be needed to avoid that the driver is accidentally disabled when only one scanner was disconnected.
</p><p>
Note that driver activation alone is not sufficient to have a usable &quot;scanner autoconfiguration&quot; for the user. What is also needed are appropriate USB device file permissions so that the user&#39;s scanning software can access the device. But this is already in place via the HAL 70-scanner.fdi file which triggers the resmgr to grant access permissions for the user who is currently locally logged in (i.e. who works directly at the computer where the USB scanner is).
</p><p>
If you do not like automated driver activation, do not install this package or remove it when it is already installed.
</p>
-Des:
##----------------------------------------
=Pkg: sane-frontends 1.0.14 302.32 x86_64
=Sum: SANE-frontends xscanimage, xcam, and scanadf
+Des:
<!-- DT:Rich -->
<p>xscanimage is a graphical scanner frontend for SANE. It can be invoked either directly from the command-line or through the GIMP image manipulation program.
</p><p>
xcam is a graphical camera frontend for SANE.
</p><p>
scanadf is a command-line frontend for SANE to control a scanner with an automatic document feeder (ADF).
</p>
-Des:
##----------------------------------------
=Pkg: sax2-libsax-devel 8.1 561.27.3 x86_64
=Sum: SaX header files for X Window System-configuration
+Des:
<!-- DT:Rich -->
<p>The devel package of libsax provides all header files needed
to use libsax in your own development environment
</p>
-Des:
##----------------------------------------
=Pkg: sax2-libsax-python 8.1 561.27.3 x86_64
=Sum: Language binding to use libsax with python
+Des:
<!-- DT:Rich -->
<p>This package provides a wrapper to be able to use libsax in
python written programs
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-base-devel 1.6.0 0.1.87 x86_64
=Sum: SBLIM Base Instrumentation Header Development Files
+Des:
<!-- DT:Rich -->
<p>SBLIM Base Provider Development Package
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-devel 2.0.1 5.4.49 x86_64
=Sum: SBLIM CMPI Provider Development Support
+Des:
<!-- DT:Rich -->
<p>This packages provides the C and C++ CMPI header files needed by
provider developers and can be used standalone. If used for
C++ provider development it is also necessary to have
tog-pegasus-devel installed.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-network-devel 1.4.0 1.1.74 x86_64
=Sum: SBLIM Network Provider Development Package
+Des:
<!-- DT:Rich -->
<p>SBLIM Network Instrumentation Header Development Files
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpiutil-devel 1.0.1 2.15 x86_64
=Sum: utility library for cmpi development
+Des:
<!-- DT:Rich -->
<p>A set of utility functions that make cmpi provider development easier
</p>
-Des:
##----------------------------------------
=Pkg: sblim-gather 2.2.0 0.3.44 x86_64
=Sum: SBLIM Performance Data Gatherer and Provider
+Des:
<!-- DT:Rich -->
<p>The purpose of this package is to implement the DMTF CIM Metrics Model
for Linux, making it available via a CIMOM supporting/supported by the CMPI
provider interface.
</p><p>
While the Gatherer and it&#39;s plugins can be used standalone, the greatest
benefit comes from using it in conjuction with a CIM Object Manager (CIMOM)
like Pegasus (The Open Group). Basically it allows to remoteley obtain
performance information about a Linux system.
For more information about CIM and the CIM Metrics Model you are referred to
the Distributed Management Task Force (DMTF) at http://www.dmtf.org.
</p><p>
</p><p>
This package is containing the agents and control programs which can be deployed stand-alone.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-gather-devel 2.2.0 0.3.44 x86_64
=Sum: SBLIM Gatherer Development Support
+Des:
<!-- DT:Rich -->
<p>This package is needed to develop new plugins for the gatherer.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-gather-provider 2.2.0 0.3.44 x86_64
=Sum: SBLIM Gatherer Provider
+Des:
<!-- DT:Rich -->
<p>This package is containing the CIM Providers for the SBLIM Gatherer.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-gather-test 2.2.0 0.3.44 x86_64
=Sum: SBLIM Gatherer Testcase Files
+Des:
<!-- DT:Rich -->
<p>SBLIM Gatherer Testcase Files for the SBLIM Testsuite
</p>
-Des:
##----------------------------------------
=Pkg: sblim-indication_helper-devel 0.4.2 129.17 x86_64
=Sum: Toolkit for CMPI indication providers (Development Files)
+Des:
<!-- DT:Rich -->
<p>This package contain developer library for helping out when writing CMPI
providers. This library polls the registered functions for data and if they
change an CMPI indication is set with the values of the indication class
properties (also set by the developer).
</p><p>
This package holds the development files for sblim-indication_helper.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-sfcc-devel 2.2.1 0.4.6 x86_64
=Sum: Small Footprint CIM Client Library
+Des:
<!-- DT:Rich -->
<p>Small Footprint CIM Client Library (sfcc) Header Files and Link Libraries
</p>
-Des:
##----------------------------------------
=Pkg: sblim-tools-libra-devel 0.5.5 4.22 x86_64
=Sum: Development files for libRaTools
+Des:
<!-- DT:Rich -->
<p>The tools-libra package provides common functionality required by
the task-specific resource access layers of the wbem-smt tasks such as
cmpi-dns and cmpi-samba.
This package includes the header files and link libraries for dependent
provider packages.
</p>
-Des:
##----------------------------------------
=Pkg: schroedinger-devel 1.0.5 2.36 x86_64
=Sum: Library for decoding and encoding video in the Dirac format
+Des:
<!-- DT:Rich -->
<p>The Schroedinger project implements portable libraries for the high quality
Dirac video codec created by BBC Research and Development. Dirac is a free
and open source codec producing very high image quality video. The project
produces two libraries in ANSI C89, one for decoding and one for encoding.
</p>
-Des:
##----------------------------------------
=Pkg: scim-32bit 1.4.7 166.32.117 x86_64
=Sum: Smart Chinese/Common Input Method platform
+Des:
<!-- DT:Rich -->
<p>SCIM is a developing platform to significantly reduce the difficulty of
input method development.
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge-gtk-32bit 0.4.15 6.22 x86_64
=Sum: Scim Bridge for gtk2
+Des:
<!-- DT:Rich -->
<p>Scim Bridge for gtk2
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge-qt-32bit 0.4.15 6.22 x86_64
=Sum: Scim Bridge for Qt
+Des:
<!-- DT:Rich -->
<p>Scim Bridge for Qt
</p>
-Des:
##----------------------------------------
=Pkg: scim-canna 1.0.0 129.31 x86_64
=Sum: Canna Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Canna Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-devel 1.4.7 166.32.117 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: scim-pinyin-skim 0.5.91.20060705 160.33 x86_64
=Sum: skim setup module for scim-pinyin
+Des:
<!-- DT:Rich -->
<p>skim setup module for scim-pinyin
</p>
-Des:
##----------------------------------------
=Pkg: scim-qtimm-32bit 0.9.4 270.29 x86_64
=Sum: Qt input module plugin for SCIM
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-skk 0.5.2 156.31 x86_64
=Sum: SKK Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>SKK Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables-skim 0.5.8 1.33 x86_64
=Sum: Skim setup module for scim-tables
+Des:
<!-- DT:Rich -->
<p>Skim setup module for scim-tables input method module.
</p>
-Des:
##----------------------------------------
=Pkg: scim-tomoe 0.6.0 1.32 x86_64
=Sum: Tomoe Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>Tomoe Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-uim 0.2.0 54.40 x86_64
=Sum: UIM Input Method Engine for SCIM
+Des:
<!-- DT:Rich -->
<p>UIM Input Method Engine for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scons 1.0.1 1.19.1 x86_64
=Sum: Replacement for Make
+Des:
<!-- DT:Rich -->
<p>SCons is a make replacement that provides a range of enhanced features, such as automated dependency generation and built-in compilation cache support.
SCons rule sets are Python scripts, which means that SCons provides itself as well as the features. SCons allows you to use the full power of Python to control compilation.
</p>
-Des:
##----------------------------------------
=Pkg: scpm-devel 1.1.7 1.19 x86_64
=Sum: Header files and API documentation for SCPM
+Des:
<!-- DT:Rich -->
<p>This package is only needed if you want to compile applications that make use of libscpm.
</p>
-Des:
##----------------------------------------
=Pkg: sdparm 1.04 0.1.47 x86_64
=Sum: List or change SCSI disk parameters
+Des:
<!-- DT:Rich -->
<p>SCSI disk parameters are held in mode pages. This utility lists or
changes those parameters. Other SCSI devices (or devices that use
the SCSI command set) such as CD/DVD and tape drives may also find
parts of sdparm useful. Requires the linux kernel 2.4 series or later.
In the 2.6 series any device node the understands a SCSI command set
may be used (e.g. /dev/sda). In the 2.4 series SCSI device node may be used.
</p><p>
Warning: It is possible (but unlikely) to change SCSI disk settings
such that the disk stops operating or is slowed down. Use with care.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse 2.28.1 0.1.156 x86_64
=Sum: GNOME2 interface for gnupg
+Des:
<!-- DT:Rich -->
<p>Seahorse is a gnome2 interface for gnupg.
It uses gpgme as the backend.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-devel 2.28.1 0.1.156 x86_64
=Sum: GNOME2 interface for gnupg
+Des:
<!-- DT:Rich -->
<p>Seahorse is a gnome2 interface for gnupg.
It uses gpgme as the backend.
</p>
-Des:
##----------------------------------------
=Pkg: seahorse-lang 2.28.1 0.1.156 x86_64
=Sum: GNOME2 interface for gnupg
+Des:
<!-- DT:Rich -->
<p>Seahorse is a gnome2 interface for gnupg.
It uses gpgme as the backend.
</p>
-Des:
##----------------------------------------
=Pkg: sendmail 8.14.3 50.20.1 x86_64
=Sum: BSD Sendmail
+Des:
<!-- DT:Rich -->
<p>The &quot;Unix System Administration Handbook&quot; calls sendmail
&quot;The most complex and complete mail delivery system in common use...&quot; .
</p><p>
Ready-made configuration files are included for systems connected by
TCP/IP (with or without a name server) and for systems using UUCP.
</p><p>
&#39;procmail&#39; is used as a local mail agent.
</p><p>
&quot;sendmail&quot; is a trademark of Sendmail, Inc.
</p>
-Des:
##----------------------------------------
=Pkg: sendmail-devel 8.14.3 50.20.1 x86_64
=Sum: BSD Sendmail Development Kit
+Des:
<!-- DT:Rich -->
<p>This package includes libraries and header files for building
tools to access sendmail features.
</p><p>
&quot;sendmail&quot; is a trademark of Sendmail, Inc.
</p>
-Des:
##----------------------------------------
=Pkg: sg3_utils-devel 1.28 0.3.5 x86_64
=Sum: A collection of tools that send SCSI commands to devices
+Des:
<!-- DT:Rich -->
<p>The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. ATAPI cd/dvd drives and SATA disks that connect via a translation layer or a bridge device are examples of devices that use SCSI command sets.
</p>
-Des:
##----------------------------------------
=Pkg: sgmltool 1.0.9 1037.16 x86_64
=Sum: SGML-Tools - a Text-Formatting Package
+Des:
<!-- DT:Rich -->
<p>SGML-Tools is a text-formatting package based on SGML (Standard Generalized
Markup Language), which allows you to produce LaTeX, HTML, GNU info, LyX, RTF,
and plain ASCII documents (via groff) from a single source.
</p><p>
</p><p>
This system is tailored for writing technical software documentation, an
example of which is the Linux HOWTO documents. It should be useful for all
kinds of printed and online documentation.
</p><p>
</p><p>
This package is the successor to the Linuxdoc package.
</p><p>
</p><p>
SGML-Tools cannot process arbitrary SGML documents. In such a
case, try jade_dsl and write your own DSSSL scripts (take the
docbk30 package as an example).
</p>
-Des:
##----------------------------------------
=Pkg: silc-toolkit 1.1.7 7.23.2 x86_64
=Sum: Secure Internet Live Conferencing Software Development Toolkit
+Des:
<!-- DT:Rich -->
<p>SILC Toolkit is a software development toolkit which provides full SILC protocol implementation for application developers. The SILC Toolkit provides SILC Client Library, SILC Protocol Core Library, SILC Key Exchange Library, SILC Crypto Library, SILC Math Library, SILC Utility Library, as well as other libraries. The SILC Toolkit also includes a full reference manual and developer guide with examples and tutorials.
</p><p>
SILC (Secure Internet Live Conferencing) is a protocol which provides secure conferencing services on the Internet over insecure channels.
SILC is similar to IRC, as they both provide conferencing services and almost have the same commands.
However, they differ internally: unlike IRC, SILC is secure and has an entirely different compared to IRC.
</p>
-Des:
##----------------------------------------
=Pkg: silc-toolkit-devel 1.1.7 7.23.2 x86_64
=Sum: Secure Internet Live Conferencing Software Development Toolkit
+Des:
<!-- DT:Rich -->
<p>SILC Toolkit is a software development toolkit which provides full SILC protocol implementation for application developers. The SILC Toolkit provides SILC Client Library, SILC Protocol Core Library, SILC Key Exchange Library, SILC Crypto Library, SILC Math Library, SILC Utility Library, and other libraries. The SILC Toolkit also includes full reference manual and developer guide with examples and tutorials.
</p><p>
SILC (Secure Internet Live Conferencing) is a protocol which provides
secure conferencing services on the Internet over insecure channel.
SILC is IRC-like software although internally they are very different.
The biggest similarity between SILC and IRC is that they both provide
conferencing services and that SILC has almost the same commands as IRC.
Other than that they are nothing alike.  Major differences are that SILC
is secure what IRC is not in any way.  The network model is also entirely
different compared to IRC.
</p>
-Des:
##----------------------------------------
=Pkg: skim 1.4.5 259.33 x86_64
=Sum: KDE integration for SCIM
+Des:
<!-- DT:Rich -->
<p>KDE integration for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-anthy 1.2.2 2.21 x86_64
=Sum: SKIM setup module for scim-anthy
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-anthy
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-canna 1.0.0 2.21 x86_64
=Sum: SKIM setup module for scim-canna
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-canna
</p>
-Des:
##----------------------------------------
=Pkg: skim-scim-skk 0.5.2.1 51.21 x86_64
=Sum: SKIM setup module for scim-skk
+Des:
<!-- DT:Rich -->
<p>SKIM setup module for scim-skk
</p>
-Des:
##----------------------------------------
=Pkg: slang-devel 2.1.1 58.18 x86_64
=Sum: Library for Display Control - Development Package
+Des:
<!-- DT:Rich -->
<p>A library with routines for display access. It is similar to ncurses, but
it has its own programming interface. Slang uses the entries in
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: slang-devel-32bit 2.1.1 58.18 x86_64
=Sum: Library for Display Control - Development Package
+Des:
<!-- DT:Rich -->
<p>A library with routines for display access. It is similar to ncurses, but
it has its own programming interface. Slang uses the entries in
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: sle-sdk-release 11.1 1.57 x86_64
=Sum: SLE SDK release file
+Des:
<!-- DT:Rich -->
<p>This package contains the product information for the
SUSE Linux Enterprise Software Development Kit
</p>
-Des:
##----------------------------------------
=Pkg: sle-sdk-release-SDK 11.1 1.57 x86_64
=Sum: SLE SDK release file
+Des:
<!-- DT:Rich -->
<p>This package contains the product information for the
SUSE Linux Enterprise Software Development Kit
</p>
-Des:
##----------------------------------------
=Pkg: smp_utils 0.94 1.1.47 x86_64
=Sum: Utilities for the SAS Management Protocol (SMP)
+Des:
<!-- DT:Rich -->
<p>The smp_utils package contains utilities for the Serial Attached SCSI (SAS) Management Protocol (SMP).  Most utilities correspond to a single SMP function, sending out a request, checking for errors and if all is well processing the response. The response is either decoded, printed out in ASCII hexadecimal or sent as binary to stdout.
</p>
-Des:
##----------------------------------------
=Pkg: sparse 0.4.1.git1 1.21 x86_64
=Sum: A semantic parser of source files
+Des:
<!-- DT:Rich -->
<p>Sparse is a semantic parser of source files: it&#39;s neither a compiler
(although it could be used as a front-end for one) nor is it a
preprocessor (although it contains as a part of it a preprocessing
phase).
</p><p>
It is meant to be a small - and simple - library.  Scanty and meager,
and partly because of that easy to use.  It has one mission in life:
create a semantic parse tree for some arbitrary user for further
analysis.  It&#39;s not a tokenizer, nor is it some generic context-free
parser.  In fact, context (semantics) is what it&#39;s all about - figuring
out not just what the grouping of tokens are, but what the _types_ are
that the grouping implies.
</p><p>
Sparse is primarily used in the development and debugging of the Linux kernel.
</p>
-Des:
##----------------------------------------
=Pkg: speechd 0.6.7 4.29 x86_64
=Sum: speech-dispatcher - speech server
+Des:
<!-- DT:Rich -->
<p>speech-dispatcher is able to manage different TTS-systems like
espeak, festival, ibmtts.
speech-dispatcher provides a generic interface
to control TTS-systems.
</p>
-Des:
##----------------------------------------
=Pkg: speechd-devel 0.6.7 4.29 x86_64
=Sum: speech-dispatcher - speech server
+Des:
<!-- DT:Rich -->
<p>speech-dispatcher is able to manage different TTS-systems like
espeak, festival, ibmtts
speech-dispatcher provides a genereic interface
to control TTS-systems
</p>
-Des:
##----------------------------------------
=Pkg: speechd-python 0.6.7 4.29 x86_64
=Sum: speech-dispatcher - speech server
+Des:
<!-- DT:Rich -->
<p>speech-dispatcher is able to manage different TTS-systems like
espeak, festival, ibmtts
speech-dispatcher provides a genereic interface
to control TTS-systems
</p>
-Des:
##----------------------------------------
=Pkg: speex-devel 1.1.99.91 2.12 x86_64
=Sum: Development package for SpeeX
+Des:
<!-- DT:Rich -->
<p>This package contains the files needed to compile programs that
use the SpeeX library.
</p>
-Des:
##----------------------------------------
=Pkg: splashy-devel 0.3.8 106.21 x86_64
=Sum: Development tools for programs using libsplashy
+Des:
<!-- DT:Rich -->
<p>This package contains the header files and libraries needed for
developing programs using libsplashy.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2 2.8.17 134.12 x86_64
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2-32bit 2.8.17 134.12 x86_64
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite2-devel 2.8.17 134.12 x86_64
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is the server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: sqlite3-devel 3.6.4 2.8 x86_64
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server; SQLite is the server. The SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command-line tool or via any application which supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: squashfs 4.0 1.2.10 x86_64
=Sum: A Read-Only File System with Efficient Compression
+Des:
<!-- DT:Rich -->
<p>This package contains the userland utilities to create and read squashfs images.
</p>
-Des:
##----------------------------------------
=Pkg: startup-notification-devel 0.9 60.13 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: strigi 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: strigi-devel 0.7.0 1.1.92 x86_64
=Sum: Lightweight and fast desktop search engine
+Des:
<!-- DT:Rich -->
<p>strigi is a very fast crawling, very small memory footprint, no hammering of the system with pluggable backend desktop search engine.
</p>
-Des:
##----------------------------------------
=Pkg: subversion 1.5.7 0.1.1 x86_64
=Sum: A Concurrent Versioning system similar to but better than CVS
+Des:
<!-- DT:Rich -->
<p>Subversion does the same thing <a href="pkg://cvs"> CVS (Concurrent Versioning System)</a> but has major enhancements compared to CVS.
The name of the cmdline client is svn.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-devel 1.5.7 0.1.1 x86_64
=Sum: Development package for Subversion developers
+Des:
<!-- DT:Rich -->
<p>The subversion-devel package includes the static libraries and include files
for developers interacting with the subversion package.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-perl 1.5.7 0.1.1 x86_64
=Sum: Allows Perl scripts to directly use Subversion repositories.
+Des:
<!-- DT:Rich -->
<p>Provides Perl (SWIG) support for Subversion.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-python 1.5.7 0.1.1 x86_64
=Sum: Allows Python scripts to directly use Subversion repositories.
+Des:
<!-- DT:Rich -->
<p>Provides Pythong (SWIG) support for Subversion.
</p>
-Des:
##----------------------------------------
=Pkg: subversion-server 1.5.7 0.1.1 x86_64
=Sum: Apache server module for Subversion server
+Des:
<!-- DT:Rich -->
<p>The subversion-server package adds the Subversion server Apache module to
the Apache directories and configuration.
</p><p>
http://subversion.tigris.org
</p>
-Des:
##----------------------------------------
=Pkg: subversion-tools 1.5.7 0.1.1 x86_64
=Sum: Tools for Subversion
+Des:
<!-- DT:Rich -->
<p>This package contains a lot of tools for subversion server and repository admins:
This package contains a lot of tools for subversion server and repository admins:<ul>
<li>hot-backup makes a backup of a svn repo without stopping
</li><li>various scripts for client (bash_completion, showchange.pl, svn-graph.pl, ...) and server (svn-backup-dumps.py, ...) site
</li><li>po file translation scripts
</li><li>hook scripts
</li><li>xslt example
</li><li>some scripts and code examples
</li></ul>
An overview of the scripts can be found at:
http://subversion.tigris.org/tools_contrib.html
</p>
-Des:
##----------------------------------------
=Pkg: sumf 0.2.4 192.53.27 x86_64
=Sum: Frontal de gestion universel SCPM
+Des:
<!-- DT:Rich -->
<p>SUMF is a graphical front-end to SCPM (System Configuration Profile Management).
</p>
-Des:
##----------------------------------------
=Pkg: swig 1.3.36 2.19 x86_64
=Sum: Simplified Wrapper and Interface Generator
+Des:
<!-- DT:Rich -->
<p>SWIG is a compiler that attempts to make it easy to integrate C, C++, or Objective-C code with scripting languages including Perl, Tcl, and Python.  In a nutshell, you give it a bunch of ANSI C/C++ declarations and it generates an interface between C and your favorite scripting language.  However, this is only scratching the surface of what SWIG can do--some of its more advanced features include automatic documentation generation, module and library management, extensive customization options, and more.
</p>
-Des:
##----------------------------------------
=Pkg: syslogd 1.4.1 708.25.34 x86_64
=Sum: The Syslog daemon
+Des:
<!-- DT:Rich -->
<p>The syslogd daemon is the general system logging daemon, which is
responsible for handling requests for syslog services.
</p><p>
This version of syslogd is similar to the standard Berkeley product,
but with a number of compatible extensions.
</p>
-Des:
##----------------------------------------
=Pkg: t1lib-devel 5.1.1 100.17 x86_64
=Sum: Development Libraries for T1lib
+Des:
<!-- DT:Rich -->
<p>This package provides the t1lib development environment (static libraries, header files, and more).
</p>
-Des:
##----------------------------------------
=Pkg: t1utils 1.26 225.8 x86_64
=Sum: a collection of simple type-1 font manipulation programs
+Des:
<!-- DT:Rich -->
<p>t1utils is a collection of simple type-1 font manipulation programs.
Together, they allow you to convert between PFA (ASCII) and PFB (binary)
formats, disassemble PFA or PFB files into human-readable form, and reassemble
them into PFA or PFB format. Additionally, you can extract font resources
from a Macintosh font file (ATM/Laserwriter) or create a Macintosh Type 1
font file from a PFA or PFB font.
</p>
-Des:
##----------------------------------------
=Pkg: tack 5.6 90.55 x86_64
=Sum: Terminfo action checker
+Des:
<!-- DT:Rich -->
<p>This package contains the tack utility to help to build a new
terminfo entry describing an unknown terminal. It can also
be used to test the correctness of an existing entry, and to
develop the correct pad timings needed to ensure that screen
updates do not fall behind the incoming data stream.
</p>
-Des:
##----------------------------------------
=Pkg: taglib-devel 1.5 19.21 x86_64
=Sum: C++ Library to Parse Metadata in media files
+Des:
<!-- DT:Rich -->
<p>libtag provides a C++ interface for reading additional data (stored in TAGs) from
MP3, Ogg Vorbis, and MPEG files.
</p>
-Des:
##----------------------------------------
=Pkg: tcl-32bit 8.5.5 2.81 x86_64
=Sum: The Tcl Programming Language
+Des:
<!-- DT:Rich -->
<p>Tcl (Tool Command Language) is a very powerful but easy to learn dynamic programming language, suitable for a very wide range of uses, including web and desktop applications, networking, administration, testing and many more. Open source and business-friendly, Tcl is a mature yet evolving language that is truly cross platform, easily deployed and highly extensible.
</p><p>
For more information on Tcl see http://www.tcl.tk and http://wiki.tcl.tk .
</p>
-Des:
##----------------------------------------
=Pkg: tcl-devel 8.5.5 2.81 x86_64
=Sum: Header Files and C API Documentation for Tcl
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed for writing Tcl extensions in compiled languages like C, C++, etc., or for embedding the Tcl interpreter in programs written in such languages.
</p><p>
This package is not needed for writing extensions or applications in the Tcl language itself.
</p>
-Des:
##----------------------------------------
=Pkg: tcpd-devel 7.6 856.13 x86_64
=Sum: Include Files and Libraries for the TCP wrapper library
+Des:
<!-- DT:Rich -->
<p>This package contains the library and header files, which
are necessary to compile and link programs against the
TCP wrapper library.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-farsight-devel 0.0.11 1.1.155 x86_64
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Telepathy Farsight is a Telepathy client that uses Farsight2 and GStreamer to handle media streaming channels. It&#39;s used as a background process by other Telepathy clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-gabble 0.7.10 2.17 x86_64
=Sum: XMPP connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>Gabble is a Jabber/XMPP connection manager for the Telepathy framework, currently supporting single user chats, multi user chats and voice/video calls. Install this package to use Telepathy instant messaging clients with Jabber/XMPP servers, including Google Talk.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-glib-devel 0.8.0 1.1.67 x86_64
=Sum: Libraries for adding telepathy support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
telepathy functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-haze 0.3.2 1.1.182 x86_64
=Sum: A libpurple connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>A connection manager for Telepathy that provide support for AIM, ICQ, MSN, Yahoo! and Groupwise using Pidgin&#39;s libpurple.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-mission-control 5.2.6 0.2.141 x86_64
=Sum: Telepathy Mission Control instant messaging connection manager
+Des:
<!-- DT:Rich -->
<p>Mission Control, or MC, is a Telepathy component providing a way for
&quot;end-user&quot; applications to abstract some of the details of connection
managers, to provide a simple way to manipulate a bunch of connection
managers at once, to remove the need to have in each program the account
definitions and credentials, to manage channel handling/request and to
manage presence statuses.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-mission-control-devel 5.2.6 0.2.141 x86_64
=Sum: Telepathy Mission Control instant messaging connection manager
+Des:
<!-- DT:Rich -->
<p>Mission Control, or MC, is a Telepathy component providing a way for
&quot;end-user&quot; applications to abstract some of the details of connection
managers, to provide a simple way to manipulate a bunch of connection
managers at once, to remove the need to have in each program the account
definitions and credentials, to manage channel handling/request and to
manage presence statuses.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-salut 0.3.10 1.1.220 x86_64
=Sum: Link-local XMPP connection manager for Telepathy
+Des:
<!-- DT:Rich -->
<p>A connection manager for Telepathy that implement peer to peer XMPP using local-link as done by and compatible with Apple Bonjour(tm) chat.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-stream-engine 0.5.11 1.1.151 x86_64
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Stream Engine is a Telepathy client that uses Farsight and GStreamer to handle
media streaming channels. It&#39;s used as a background process by other Telepathy
clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: telnet-server 1.2 134.22 x86_64
=Sum: A Server Program for the Telnet Remote Login Protocol
+Des:
<!-- DT:Rich -->
<p>Telnet is a popular protocol for logging into remote systems. This
package provides the telnet daemon, which will allow remote logins
into this machine.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin 2007 219.34.6 x86_64
=Sum: The Base System of TeXLive
+Des:
<!-- DT:Rich -->
<p>After installing texlive and the package texlive-latex, find a large
selection of documentation for TeX, LaTeX, and various layout styles
in /usr/share/texmf/doc.
</p><p>
TeX (pronounced tech) is an interpreter for text formatting and was
developed by Donald E. Knuth.  It works with control and macro commands
on a text file. Working with TeX is similar to typesetting methods.
LaTeX is a complex macro package that removes the cryptical TeX
interface and does most of the work for the user.
</p><p>
TeX uses special fonts produced by the MetaFont program. Various
printer drivers and an X11 viewer are also included in this package.
The teTeX package is based on the standard TeX package of Karl Berry,
which makes configuration much easier. It is also possible to use
PostScript fonts. A real PostScript printer is required, however. If
the ghostscript (gs) package is installed, all drivers for printing and
viewing can use these fonts. Note, however, that the fonts included in
the ghostscript package are not identical to Adobe&#39;s PostScript fonts.
The copyright prohibits us to include them on the CD.
</p><p>
Besides these features, the programs MakeIndex (for producing
indexes) and BibTeX (for literature data processing) exist.
</p><p>
The texlive package includes a full texmf tree, many programs like
tex, dvips, etc., shell script configuration, and a big collection
of documentations. This package is simply configured by the script
texconfig and has multilanguage options.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-cjk 2007 219.34.6 x86_64
=Sum: LaTeX Macro Package for CJK (Chinese/Japanese/Korean)
+Des:
<!-- DT:Rich -->
<p>CJK LaTeX is a macro package for LaTeX to enable typesetting Chinese,
Japanese, and Korean. It supports (simultaneously) various CJK
encodings, such as Big5, GB, JIS, KS, and CNS.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-devel 2007 219.34.6 x86_64
=Sum: The WEB tools, the headers and library of the Kpathsea tools
+Des:
<!-- DT:Rich -->
<p>The purpose of the Kpathsea library is to return a file name from a
list of directories.  This package provides the static library and the
header files for compiling and linking programs with Kpathsea support.
For the normal use of TeX and LaTeX, this package is not required.
</p><p>
WEB is a programming language designed to force the programmer to write
the documentation during programming.  For example, Donald Erwin Knuth
has written his typesetting program TeX in WEB.
</p><p>
The tools tangle and weave are used to produce the ready to compile
source code in Pascal and the documentation in TeX.
</p><p>
This package is not required for the use of TeX or LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-dvilj 2007 219.34.6 x86_64
=Sum: Printer drivers for LaserJets (obsolete)
+Des:
<!-- DT:Rich -->
<p>This package contains drivers for various LaserJets. In most cases,
these drivers are not used because, with the programs dvips and
ghostscript, not only the same print quality is reached, but, due to
the intermediate PostScript step, some very useful graphical features
are given.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-jadetex 2007 219.34.6 x86_64
=Sum: TeX Processor for OpenJade
+Des:
<!-- DT:Rich -->
<p>With Sebastian Rahtz&#39;s macro package jadetex, it is possible to process
the output of the TeX back-end for OpenJade and produce DVI or PDF
files. Resulting DVI files are viewable with xdvi or printable like
any other DVI file.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-latex 2007 219.34.6 x86_64
=Sum: All About LaTeX
+Des:
<!-- DT:Rich -->
<p>This package provides LaTeX. To be exact, LaTeX2e, and a huge amount
software for LaTeX.  This package is required by most (La)TeX
documents.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-metapost 2007 219.34.6 x86_64
=Sum: All about MetaPost
+Des:
<!-- DT:Rich -->
<p>This package provides MetaPost, which is a program with a similar macro
language as MetaFont, but, in comparison to MetaFont, the output is not
a bitmap, but in PostScript.
</p><p>
If familiar with the language of MetaFont, this program will provide an
excellent tool for drawing. This can happens interactively, with a
file, or by an other program.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-musictex 2007 219.34.6 x86_64
=Sum: MusiXTeX et MusicTeX
+Des:
<!-- DT:Rich -->
<p>This packages is only usable for TeX experts with musical ambitions. It
contains a music TeX format file musixtex for direct usage onto TeX
music files. LaTeX users should use the corresponding style file.  For
a description, look under /usr/share/texmf/doc/texlive-musictex/.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-omega 2007 219.34.6 x86_64
=Sum: Omega, an extended TeX/LaTeX version with unicode
+Des:
<!-- DT:Rich -->
<p>The Omega typesetting system, an extension of TeX, is designed for
typesetting of all the world&#39;s languages. It normally  uses the unicode
character encoding standard as internal representation.
</p><p>
If this extension used together with the macro package LaTeX, this
version of Omega is called Lambda.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-tex4ht 2007 219.34.6 x86_64
=Sum: Convertit le (La)TeX vers le HTML/XML
+Des:
<!-- DT:Rich -->
<p>Tex4ht does not parse (La)TeX source. Instead, Tex4ht uses (La)TeX
itself to produce a non-standard DVI file that it can then process.
This technique gives TeX4ht the robustness characteristic of
restricted-syntax systems such as hyperlatex and gellmu.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-tools 2007 219.34.6 x86_64
=Sum: Utilities like DviToDvi, DeTeX, and LaCheck
+Des:
<!-- DT:Rich -->
<p>The DeTeX filter removes TeX and LaTeX macros.
</p><p>
The LaCheck utility is a syntax checker for LaTeX documents.
</p><p>
The DviToDvi utilities are
</p><p>
dvibook       rearranges pages into book signatures, adds blank pages as needed
</p><p>
dviselect     selects pages and page ranges
</p><p>
dvitodvi      performs general page rearrangement of selected pages
</p><p>
dviconcat     concatenation of DVI files
</p><p>
Three simple scripts for scaling DIN A4 pages and rearranging two by
two onto a DIN A4 page (a4toa5) are included. The number of pages must
be even (which can be done by odd2even or dvibook).
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-xetex 2007 219.34.6 x86_64
=Sum: XeTeX, an extended TeX/LaTeX version for unicode
+Des:
<!-- DT:Rich -->
<p>The XeTeX typesetting system is based on a merger of
Donald Knuth&#39;s TeX system with Unicode and modern font technologies.
</p><p>
If this extension used together with the macro package LaTeX, this
version of XeTeX is called XeLaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: texlive-bin-xmltex 2007 219.34.6 x86_64
=Sum: Typesetting XML with TeX
+Des:
<!-- DT:Rich -->
<p>xmltex is a system for typesetting XML files with TeX. It may be used
on its own or in conjunction with another TeX format. (LaTeX is assumed
for most examples).
</p><p>
xmltex supports the XML Namespace Recommendation. Arbitrary prefixes
may be used in document instances and in definition files. It supports
any encoding that matches ASCII in the first 127 positions. UTF-8,
latin-1, and KOI8-R are included in the distribution. Other encodings
may be trivially added.
</p><p>
Further documentation may be obtained by running manual.tex through
LaTeX.
</p>
-Des:
##----------------------------------------
=Pkg: tidy 1.0 34.7 x86_64
=Sum: Utility to clean up and pretty-print HTML/XHTML/XML
+Des:
<!-- DT:Rich -->
<p>When editing HTML it&#39;s easy to make mistakes. Wouldn&#39;t it be nice if
there was a simple way to fix these mistakes automatically and tidy up
sloppy editing into nicely layed out markup? Well now there is! Dave
Raggett&#39;s HTML TIDY is a free utility for doing just that. It also works
great on the atrociously hard to read markup generated by specialized
HTML editors and conversion tools, and can help you identify where you
need to pay further attention on making your pages more accessible to
people with disabilities.
</p><p>
</p><p>
Tidy is able to fix up a wide range of problems and to bring to your
attention things that you need to work on yourself. Each item found is
listed with the line number and column so that you can see where the
problem lies in your markup. Tidy won&#39;t generate a cleaned up version
when there are problems that it can&#39;t be sure of how to handle. These
are logged as &quot;errors&quot; rather than &quot;warnings&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: tix 8.4.3 1.17 x86_64
=Sum: Tools for tk
+Des:
<!-- DT:Rich -->
<p>The Tix library has, by far, the greatest collection of widgets
for programming with Tcl/Tk. Highlights include: hierarchical
list box, directory list/tree view, spreadsheet, tabular
list box, combo box, Motif style file select box, MS Windows style
file select box, paned window, note book, spin control widget
and many more. With these new widgets, your applications will
look great and interact with your users in intuitive ways.
</p>
-Des:
##----------------------------------------
=Pkg: tk-devel 8.5.5 3.12 x86_64
=Sum: Header Files and C API Documentation for Tk
+Des:
<!-- DT:Rich -->
<p>This package contains header files and documentation needed for writing Tk extensions in compiled languages like C, C++, etc., or for embedding Tk in programs written in such languages.
</p><p>
This package is not needed for writing extensions or applications for Tk in the Tcl language itself.
</p>
-Des:
##----------------------------------------
=Pkg: tla 1.3.3 54.6 x86_64
=Sum: Arch Revision Control System
+Des:
<!-- DT:Rich -->
<p>Also known as gnu-arch. It is an implementation of arch in C, by Tom Lord.
</p><p>
A modern replacement for CVS, specifically designed for the distributed
development needs of open source projects. It has uniquely good support
for development on branches (especially good merging tools), distributed
repositories (every developer can have branches in their own repository),
changeset-oriented project management (arch commits changes to multiple
files at once), and, of course, file and directory renaming.
</p><p>
You might also want to install a GUI for tla - <a href="pkg://archway">archway</a> or
web based browser - <a href="pkg://archzoom">archzoom</a>.
</p>
-Des:
##----------------------------------------
=Pkg: tn5250 0.16.5 439.22 x86_64
=Sum: 5250 Emulator
+Des:
<!-- DT:Rich -->
<p>The 5250 is most commonly used for connecting to IBM&#39;s AS/400.  While one can
connect to an AS/400 with a VT100 emulator, it is not ideal.  The problem is
that the 5250 is a screen at a time terminal, whereas the VT100 is a character
at a time device.  The emulator uses telnet&#39;s binary mode to transfer
the 5250 data stream.
</p>
-Des:
##----------------------------------------
=Pkg: tn5250-devel 0.16.5 439.22 x86_64
=Sum: 5250 Emulator
+Des:
<!-- DT:Rich -->
<p>The 5250 is most commonly used for connecting to IBM&#39;s AS/400.  While one can
connect to an AS/400 with a VT100 emulator, it is not ideal.  The problem is
that the 5250 is a screen at a time terminal, whereas the VT100 is a character
at a time device.  The emulator uses telnet&#39;s binary mode to transfer
the 5250 data stream.
</p>
-Des:
##----------------------------------------
=Pkg: tomcat_apparmor 2.0.2 229.31 x86_64
=Sum: Tomcat 5 plugin for AppArmor change_hat
+Des:
<!-- DT:Rich -->
<p>tomcat_apparmor - is a plugin for Apache Tomcat version 5.x that provides
support for AppArmor change_hat for creating AppArmor containers that are
bound to discrete elements of processing within the Tomcat servlet
container. The AppArmor containers, or &quot;hats&quot;, can be created for individual
URL processing or per servlet.
</p>
-Des:
##----------------------------------------
=Pkg: tomoe 0.6.0 1.22 x86_64
=Sum: Japanese handwriting recognition engine
+Des:
<!-- DT:Rich -->
<p>Japanese handwriting recognition engine
(Tegaki Online MOji-ninshiki Engine)
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-devel 0.6.0 1.22 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>Include Files and Libraries mandatory for Development
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-gtk 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-gtk-devel 0.6.0 1.33 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: tomoe-gtk-lang 0.6.0 1.33 x86_64
=Sum: TOMOE GTK+ library
+Des:
<!-- DT:Rich -->
<p>TOMOE GTK+ library
</p>
-Des:
##----------------------------------------
=Pkg: totem-pl-parser-devel 2.28.1 1.2.109 x86_64
=Sum: A simple GObject-based library to parse playlist formats
+Des:
<!-- DT:Rich -->
<p>totem-pl-parser is a simple GObject-based library to parse a host of
playlist formats, to save them too.
</p>
-Des:
##----------------------------------------
=Pkg: tree 1.5.1 2.8 x86_64
=Sum: File listing as a tree
+Des:
<!-- DT:Rich -->
<p>A tree-like directory listing program with dircolors support
</p>
-Des:
##----------------------------------------
=Pkg: trousers-devel 0.3.1 6.26 x86_64
=Sum: TSS (TCG Software Stack) access daemon for a TPM chip
+Des:
<!-- DT:Rich -->
<p>The trousers package provides a TSS implementation through the help of a user-space daemon, the tcsd, and a library  Trousers aims to be compliant to the 1.1b and 1.2 TSS specifications as available from the Trusted Computing website http://www.trustedcomputinggroup.org/.
</p><p>
The package needs the /dev/tpm device file to be present on your system. It is a character device file major 10 minor 224, 0600 tss:tss.
</p>
-Des:
##----------------------------------------
=Pkg: tsclient 2.0.2 8.23.80 x86_64
=Sum: Terminal Server Client is a frontend for rdesktop
+Des:
<!-- DT:Rich -->
<p>Terminal Server Client (tsclient) is a frontend for rdesktop. It supports most of the rdesktop 1.1/1.2 arguments, can read .rdp files in the Microsoft Unicode format, writes new .rdp files in ASCII (which can also be read by the Microsoft RDP Client), and looks and functions very much like the Microsoft RDP Client. It features a Gnome panel applet to quickly launch saved rdp files.
</p>
-Des:
##----------------------------------------
=Pkg: tsclient-devel 2.0.2 8.23.80 x86_64
=Sum: Terminal Server Client is a frontend for rdesktop
+Des:
<!-- DT:Rich -->
<p>Terminal Server Client (tsclient) is a frontend for rdesktop. It supports most of the rdesktop 1.1/1.2 arguments, can read .rdp files in the Microsoft Unicode format, writes new .rdp files in ASCII (which can also be read by the Microsoft RDP Client), and looks and functions very much like the Microsoft RDP Client. It features a Gnome panel applet to quickly launch saved rdp files.
</p>
-Des:
##----------------------------------------
=Pkg: tsclient-lang 2.0.2 8.23.80 x86_64
=Sum: Terminal Server Client is a frontend for rdesktop
+Des:
<!-- DT:Rich -->
<p>Terminal Server Client (tsclient) is a frontend for rdesktop. It supports most of the rdesktop 1.1/1.2 arguments, can read .rdp files in the Microsoft Unicode format, writes new .rdp files in ASCII (which can also be read by the Microsoft RDP Client), and looks and functions very much like the Microsoft RDP Client. It features a Gnome panel applet to quickly launch saved rdp files.
</p>
-Des:
##----------------------------------------
=Pkg: tse3 0.3.1 144.15 x86_64
=Sum: TSE3 MIDI Sequencer Library
+Des:
<!-- DT:Rich -->
<p>TSE3 is a MIDI sequencer library written in C++. Sequencer
applications or multimedia presentation packages can
incorporate the TSE3 libraries to provide a user with MIDI
sequencing facilities. The library is open source.
</p>
-Des:
##----------------------------------------
=Pkg: tse3-devel 0.3.1 144.15 x86_64
=Sum: Development packages for the TSE3 MIDI Sequencer Library
+Des:
<!-- DT:Rich -->
<p>TSE3 is a MIDI sequencer library written in C++. Sequencer
applications or multimedia presentation packages can
incorporate the TSE3 libraries to provide a user with MIDI
sequencing facilities. The library is open source.
</p><p>
This package holds the development files for TSE3.
</p>
-Des:
##----------------------------------------
=Pkg: turnpike 0.1.2 2.1.300 x86_64
=Sum: IKE Plugin framework for IPSec tools
+Des:
<!-- DT:Rich -->
<p>This package contains binaries for making use of ipsec-tools with a plugin framework. This enables to write custom vendor plugins to process IPSec packets for solutions like VPN.
</p>
-Des:
##----------------------------------------
=Pkg: uim 1.2.1 276.39 x86_64
=Sum: a multilingual input method library
+Des:
<!-- DT:Rich -->
<p>Uim is a multilingual input method library. Uim&#39;s project goal is to
provide secure and useful input method for all languages. Currently,
it can input to applications which support gtk+&#39;s immodule or XIM.
</p>
-Des:
##----------------------------------------
=Pkg: uim-32bit 1.2.1 276.39 x86_64
=Sum: a multilingual input method library
+Des:
<!-- DT:Rich -->
<p>Uim is a multilingual input method library. Uim&#39;s project goal is to
provide secure and useful input method for all languages. Currently,
it can input to applications which support gtk+&#39;s immodule or XIM.
</p>
-Des:
##----------------------------------------
=Pkg: uim-devel 1.2.1 276.39 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>Include Files and Libraries mandatory for Development.
</p>
-Des:
##----------------------------------------
=Pkg: uim-gtk2 1.2.1 276.39 x86_64
=Sum: Control applet using gnome2
+Des:
<!-- DT:Rich -->
<p>Control applet using gnome2
</p>
-Des:
##----------------------------------------
=Pkg: uim-gtk2-32bit 1.2.1 276.39 x86_64
=Sum: Control applet using gnome2
+Des:
<!-- DT:Rich -->
<p>Control applet using gnome2
</p>
-Des:
##----------------------------------------
=Pkg: uim-qt 1.2.1 276.39 x86_64
=Sum: Qt input module plugin for uim
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for uim
</p>
-Des:
##----------------------------------------
=Pkg: uim-qt-32bit 1.2.1 276.39 x86_64
=Sum: Qt input module plugin for uim
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for uim
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC-devel 2.2.12 198.17 x86_64
=Sum: Includes and Static Libraries for ODBC Development
+Des:
<!-- DT:Rich -->
<p>Includes and static libraries for ODBC development (based on unixODBC).
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC-devel-32bit 2.2.12 198.17 x86_64
=Sum: Includes and Static Libraries for ODBC Development
+Des:
<!-- DT:Rich -->
<p>Includes and static libraries for ODBC development (based on unixODBC).
</p>
-Des:
##----------------------------------------
=Pkg: unsermake 0.4_20070504 3.8 x86_64
=Sum: Replacement for make and automake
+Des:
<!-- DT:Rich -->
<p>Developed for building KDE, Unsermake replaces the functionality of automake and make.
</p>
-Des:
##----------------------------------------
=Pkg: usb_modeswitch 0.9.6 1.11 x86_64
=Sum: A mode switching tool for controlling multiple-device USB gear
+Des:
<!-- DT:Rich -->
<p>USB_ModeSwitch is a mode switching tool for controlling &quot;flip flop&quot; (multiple device) USB gear.
It allows so-called &quot;Zero-CD&quot; devices that show up as USB storage initially to be switched into their more useful &quot;application mode&quot;. This is most common for UMTS/3G wireless WAN devices.
</p>
-Des:
##----------------------------------------
=Pkg: usbip-devel 0.1.6 2.17 x86_64
=Sum: Headers and static libraries
+Des:
<!-- DT:Rich -->
<p>This package contains headers and static libraries for USB/IP development
</p>
-Des:
##----------------------------------------
=Pkg: valgrind 3.5.0 4.3.4 x86_64
=Sum: Suite d'outils Valgrind pour le débogage et l'optimisation
+Des:
<!-- DT:Rich -->
<p>Valgrind vérifie les opérations relatives à la mémoire dans une application, telles que read, write, malloc, new, free, et delete. Valgrind peut détecter l&#39;utilisation de mémoire non initialisée, des accès à des zones de mémoires déjà libérées, des dépassements de tampon, des opérations illégales sur le tas, des fuites de mémoires, et des commandes illégales new/malloc/free/delete .
Un autre programme dans le paquet est &quot;cachegrind,&quot; un optimiseur basé sur le moteur
valgrind. Il supporte des modules externes, de nombreux autres outils sont disponibles .
</p><p>
Pour utiliser valgrind, vous devez lancer l&#39;application comme d&#39;habitude mais avec les paquets debuginfo installés, par exemple:
</p><p>
valgrind --tool=memcheck --leak-check=yes mon_application
</p><p>
Plus d&#39;options sont disponibles. Veuillez consulter &quot;valgrind --help&quot; pour une liste. Il y a aussi une documentation complète dans le répertoire /usr/share/doc/packages/valgrind/.
Une application en mode débogage s&#39;exécute plus lentement et nécessite plus de mémoire mais reste généralement utilisable.
</p>
-Des:
##----------------------------------------
=Pkg: valgrind-devel 3.5.0 4.3.4 x86_64
=Sum: Suite d'outils Valgrind pour le débogage et l'optimisation
+Des:
<!-- DT:Rich -->
<p>Valgrind vérifie les opérations relatives à la mémoire dans une application, telles que read, write, malloc, new, free, et delete. Valgrind peut détecter l&#39;utilisation de mémoire non initialisée, des accès à des zones de mémoires déjà libérées, des dépassements de tampon, des opérations illégales sur le tas, des fuites de mémoires, et des commandes illégales new/malloc/free/delete .
Un autre programme dans le paquet est &quot;cachegrind,&quot; un optimiseur basé sur le moteur
valgrind. Il supporte des modules externes, de nombreux autres outils sont disponibles .
</p><p>
Pour utiliser valgrind, vous devez lancer l&#39;application comme d&#39;habitude mais avec les paquets debuginfo installés, par exemple:
</p><p>
valgrind --tool=memcheck --leak-check=yes mon_application
</p><p>
Plus d&#39;options sont disponibles. Veuillez consulter &quot;valgrind --help&quot; pour une liste. Il y a aussi une documentation complète dans le répertoire /usr/share/doc/packages/valgrind/.
Une application en mode débogage s&#39;exécute plus lentement et nécessite plus de mémoire mais reste généralement utilisable.
</p>
-Des:
##----------------------------------------
=Pkg: vcdimager 0.7.23 121.12 x86_64
=Sum: Logiciel d'édition de CD Vidéo (VCD)
+Des:
<!-- DT:Rich -->
<p>GNU VCDImager is a full-featured mastering suite for authoring, disassembling
and analyzing Video CDs and Super Video CDs.
</p><p>
The following features are available so far:
</p><p>
Support for Video CD 1.1 and 2.0 disc formats
</p><p>
Support for the Super Video CD 1.0 disc format
</p><p>
Full PBC (playback control) support (play lists, selection lists and end
lists)
</p><p>
Support for segment play items
</p><p>
Automatic padding of MPEG streams on the fly
</p><p>
Support for 99-minute (out-of-specification) CD-R media
</p><p>
Extraction of Video CDs into files (incl. the PBC information)
</p><p>
Use of XML for the description of Video CDs
</p>
-Des:
##----------------------------------------
=Pkg: vcdimager-devel 0.7.23 121.12 x86_64
=Sum: Logiciel d'édition de CD Vidéo (VCD)
+Des:
<!-- DT:Rich -->
<p>GNU VCDImager is a full-featured mastering suite for authoring, disassembling
and analyzing Video CDs and Super Video CDs.
</p><p>
The following features are available so far:
</p><p>
Support for Video CD 1.1 and 2.0 disc formats
</p><p>
Support for the Super Video CD 1.0 disc format
</p><p>
Full PBC (playback control) support (play lists, selection lists and end
lists)
</p><p>
Support for segment play items
</p><p>
Automatic padding of MPEG streams on the fly
</p><p>
Support for 99-minute (out-of-specification) CD-R media
</p><p>
Extraction of Video CDs into files (incl. the PBC information)
</p><p>
Use of XML for the description of Video CDs
</p>
-Des:
##----------------------------------------
=Pkg: vlna 1.3 1.22 x86_64
=Sum: Ajout d'espaces insécables pour les textes en tchèque
+Des:
<!-- DT:Rich -->
<p>Vlna complète TeX en mettant des espaces insécables (espaces liants)
au lieu d&#39;espaces normaux après les mots d&#39;une seule lettre dans les
textes tchèques.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Veuillez consulter le fichier /usr/share/doc/packages/x_cz_sk/README.1st après l&#39;installation.
</p>
-Ins:
##----------------------------------------
=Pkg: vm-dump-metrics 0.4 0.5.36 x86_64
=Sum: Virtual Host Metrics Daemon (vhostmd)
+Des:
<!-- DT:Rich -->
<p>vhostmd provides a &quot;metrics communication channel&quot; between a host and its hosted virtual machines, allowing limited introspection of host resource usage from within virtual machines
</p>
-Des:
##----------------------------------------
=Pkg: vm-dump-metrics-devel 0.4 0.5.36 x86_64
=Sum: Virtual Host Metrics Daemon (vhostmd)
+Des:
<!-- DT:Rich -->
<p>vhostmd provides a &quot;metrics communication channel&quot; between a host and its hosted virtual machines, allowing limited introspection of host resource usage from within virtual machines
</p>
-Des:
##----------------------------------------
=Pkg: vobject 0.7.1 1.20 x86_64
=Sum: Une bibliothèque python pour créer et analyser des objets iCalendar et vCard.
+Des:
<!-- DT:Rich -->
<p>VObject simplifie l&#39;analyse et la création d&#39;objets iCalendar et vCard.
</p>
-Des:
##----------------------------------------
=Pkg: vte-devel 0.22.5 0.1.147 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>VTE est émulateur de terminal utilisant GTK+ 2.
Ce paquet contient les fichiers requis pour le développement d&#39;applications utilisant VTE.
</p>
-Des:
##----------------------------------------
=Pkg: vte016-sharp 2.26.0 2.2.7 x86_64
=Sum: Connecteurs Mono pour vte
+Des:
<!-- DT:Rich -->
<p>Connecteurs Mono pour vte
</p>
-Des:
##----------------------------------------
=Pkg: wavpack 4.50.1 1.22 x86_64
=Sum: Free Hybrid Lossless Audio Compression Format
+Des:
<!-- DT:Rich -->
<p>WavPack is a completely open audio compression format providing lossless,
high-quality lossy, and unique hybrid compression modes. Although the
technology is loosely based on previous versions of WavPack, the new
version 4 format has been designed from the ground up to offer unparalleled
performance and functionality.
</p><p>
By default, lossless mode WavPack acts just like a WinZip compressor for
audio files. However, unlike MP3 or WMA encoding which can affect the sound
quality, not a single bit of the original information is lost, so there is no
chance of degradation. This makes lossless mode ideal for archiving audio
material or any other situation where quality is paramount. The compression
ratio depends on the source material, but generally is between 30% and 70%.
</p><p>
The hybrid mode provides all the advantages of lossless compression with an
additional bonus. Instead of creating a single file, this mode creates both, a
relatively small, high-quality lossy file that can be used all by itself, and a
&quot;correction&quot; file that (when combined with the lossy file) provides full
lossless restoration. For some users this means never having to choose between
lossless and lossy compression!
</p>
-Des:
##----------------------------------------
=Pkg: wavpack-devel 4.50.1 1.22 x86_64
=Sum: Free Hybrid Lossless Audio Compression Format
+Des:
<!-- DT:Rich -->
<p>WavPack is a completely open audio compression format providing lossless,
high-quality lossy, and a unique hybrid compression mode. Although the
technology is loosely based on previous versions of WavPack, the new
version 4 format has been designed from the ground up to offer unparalleled
performance and functionality.
</p><p>
In the default lossless mode WavPack acts just like a WinZip compressor for
audio files. However, unlike MP3 or WMA encoding which can affect the sound
quality, not a single bit of the original information is lost, so there&#39;s no
chance of degradation. This makes lossless mode ideal for archiving audio
material or any other situation where quality is paramount. The compression
ratio depends on the source material, but generally is between 30% and 70%.
</p><p>
The hybrid mode provides all the advantages of lossless compression with an
additional bonus. Instead of creating a single file, this mode creates both a
relatively small, high-quality lossy file that can be used all by itself, and a
&quot;correction&quot; file that (when combined with the lossy file) provides full
lossless restoration. For some users this means never having to choose between
lossless and lossy compression!
</p>
-Des:
##----------------------------------------
=Pkg: wiggle 0.6 116.8 x86_64
=Sum: A Tool for Applying Patches with Conflicts
+Des:
<!-- DT:Rich -->
<p>Wiggle is a program for applying patches that &#39;patch&#39; cannot
apply due to conflicting changes in the original.
</p><p>
Wiggle will always apply all changes in the patch to the original.
If it cannot find a way to cleanly apply a patch, it inserts it
in the original in a manner similar to &#39;merge,&#39; and reports an
unresolvable conflict.
</p>
-Des:
##----------------------------------------
=Pkg: wireshark 1.0.5 1.34.1 x86_64
=Sum: A Network Traffic Analyser
+Des:
<!-- DT:Rich -->
<p>Wireshark is a free network protocol analyzer for Unix and Windows. It allows you to examine data from a live network or from a capture file on disk. You can interactively browse the capture data, viewing summary and detail information for each packet. Wireshark has several powerful features, including a rich display filter language and the ability to view the reconstructed stream of a TCP session.
</p>
-Des:
##----------------------------------------
=Pkg: wireshark-devel 1.0.5 1.34.1 x86_64
=Sum: A Network Traffic Analyser
+Des:
<!-- DT:Rich -->
<p>Wireshark is a free network protocol analyzer for Unix and Windows. It allows you to examine data from a live network or from a capture file on disk. You can interactively browse the capture data, viewing summary and detail information for each packet. Wireshark has several powerful features, including a rich display filter language and the ability to view the reconstructed stream of a TCP session.
</p>
-Des:
##----------------------------------------
=Pkg: wodim-devel 1.1.8 3.25 x86_64
=Sum: Tool for writing CDRs - files mandatory for development
+Des:
<!-- DT:Rich -->
<p>This package contains cdrkit libraries.
</p>
-Des:
##----------------------------------------
=Pkg: wordcut-devel 0.5.1b2 113.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: wv 1.2.2 177.33 x86_64
=Sum: Library and Tools for Importing  Microsoft Word (tm) Documents
+Des:
<!-- DT:Rich -->
<p>WV is a program that can understand the Microsoft Word 8
binary file format (Office97). It currently converts Word into HTML,
which can then be read with a web browser.
</p>
-Des:
##----------------------------------------
=Pkg: wv-devel 1.2.2 177.33 x86_64
=Sum: Static Libraries and Header Files for wv
+Des:
<!-- DT:Rich -->
<p>Static Libraries and Header Files for wv
</p>
-Des:
##----------------------------------------
=Pkg: wvstreams 4.4.1 5.16 x86_64
=Sum: Network Programming Library in C++
+Des:
<!-- DT:Rich -->
<p>A network programming library in C++. It aims to be an efficient,
secure, easy to use, and OS-independent library for network
application development.
</p>
-Des:
##----------------------------------------
=Pkg: wvstreams-devel 4.4.1 5.16 x86_64
=Sum: Network Programming Library in C++
+Des:
<!-- DT:Rich -->
<p>A network programming library in C++. It aims to be an efficient,
secure, easy to use, and OS-independent library for network
application development.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK-compat 2.8.8.1 1.36 x86_64
=Sum: Non-Unicode wxWidgets Compatibility Package
+Des:
<!-- DT:Rich -->
<p>wxWidgets is a free C++ framework to make cross-platform programming easy.
It supports Windows 3.1/95/98/NT, and UNIX with
GTK/Motif/Lesstif. This is the version for GTK+. This package only
contains the runtime libraries and other data needed by the runtime
libraries.
</p><p>
This package contains a library compiled without Unicode support, which is needed for some improperly written applications.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK-devel 2.8.8.1 1.36 x86_64
=Sum: Everything needed for development with wxGTK
+Des:
<!-- DT:Rich -->
<p>This package contains all files needed for developing with wxGTK (headers,
*.so symbolic links, etc.)
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK-gl 2.8.8.1 1.36 x86_64
=Sum: OpenGl add-on for wxGTK
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenGl add-on library for wxGTK, the GTK+
port of wxWidgets.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom 0.8.6 0.2.16 x86_64
=Sum: X11 input module for wacom tablet
+Des:
<!-- DT:Rich -->
<p>This package contains the X11 input module for wacom tablets.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom-devel 0.8.6 0.2.16 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: x11-input-wacom-tools 0.8.6 0.2.16 x86_64
=Sum: Tools for configuration, diagnostic and libraries for Wacom tablets
+Des:
<!-- DT:Rich -->
<p>This package contains tools for configuration, diagnostic and libraries for
Wacom tablets.
</p>
-Des:
##----------------------------------------
=Pkg: xaw3d-devel 1.5E 408.13 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require the xaw3d library.
</p>
-Des:
##----------------------------------------
=Pkg: xbase 2.0.0 251.15 x86_64
=Sum: XBase Compatible C++ Class Library
+Des:
<!-- DT:Rich -->
<p>This is an XBase (dBase and FoxPro, for example) compatible C++ class library.
</p><p>
This package contains header files, a library, some command line tools,
and developer documentation.
</p>
-Des:
##----------------------------------------
=Pkg: xbase-devel 2.0.0 251.15 x86_64
=Sum: Developmnet files for XBase Compatible C++ Class Library
+Des:
<!-- DT:Rich -->
<p>This is an XBase (dBase and FoxPro, for example) compatible C++ class library.
</p><p>
This package contains header files and development files.
</p>
-Des:
##----------------------------------------
=Pkg: xdelta 1.1.4 103.28 x86_64
=Sum: Binary delta generator and RCS replacement library
+Des:
<!-- DT:Rich -->
<p>Xdelta is a binary delta generator and RCS replacement library. The delta algorithm is faster than GNU diff for text files and works on binary files, too.
</p>
-Des:
##----------------------------------------
=Pkg: xdelta-devel 1.1.4 103.28 x86_64
=Sum: Binary delta generator and RCS replacement library
+Des:
<!-- DT:Rich -->
<p>Xdelta is a binary delta generator and RCS replacement library. The delta algorithm is faster than GNU diff for text files and works on binary files, too.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs 21.5.28.20080401 59.23.2 x86_64
=Sum: XEmacs
+Des:
<!-- DT:Rich -->
<p>This is the current version of XEmacs, formerly known as Lucid-Emacs.
It is related to other versions of Emacs, in particular GNU Emacs. Its
emphasis is on modern graphical user interface support and an open
software development model, similar to Linux.
</p><p>
Lisp macros are not necessarily interchangeable between GNU-Emacs and
XEmacs. This is mainly important for translated .elc files and the key
macros.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-el 21.5.28.20080401 59.23.2 x86_64
=Sum: Emacs-Lisp source files for XEmacs
+Des:
<!-- DT:Rich -->
<p>Most Emacs-Lisp source files are not needed for running XEmacs.
Most of them are also available in byte compiled form
and therefore not necessary at runtime.
The true XEmacs addict will install them nevertheless
because it is often useful and enlightening to have
a look at the Lisp sources.
</p>
-Des:
##----------------------------------------
=Pkg: xemacs-info 21.5.28.20080401 59.23.2 x86_64
=Sum: Info Files for XEmacs
+Des:
<!-- DT:Rich -->
<p>This package contains all info files for XEmacs.
All these files can be read online with XEmacs and describe
XEmacs and some of its modes.
</p>
-Des:
##----------------------------------------
=Pkg: xen-devel 4.0.0_21091_04 0.2.6 x86_64
=Sum: Xen Virtualization: Headers and libraries for development
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the libraries and header files needed to create tools to control virtual machines.
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p>
-Des:
##----------------------------------------
=Pkg: xfig 3.2.5 92.22.1 x86_64
=Sum: Facility for Interactive Generation of Figures under the X Window System
+Des:
<!-- DT:Rich -->
<p>Xfig is a menu-driven tool that allows the user to draw and manipulate objects
interactively in an X Window System window.  The resulting pictures can be saved, printed
on PostScript printers, or converted to a variety of other formats (to
allow inclusion in LaTeX documents, for example).
</p><p>
</p><p>
Documentation: /usr/share/doc/packages/xfig &amp; man xfig
</p><p>
Examples: /usr/share/doc/packages/xfig/TheExamples
</p>
-Des:
##----------------------------------------
=Pkg: xfsdump 3.0.4 0.1.35 x86_64
=Sum: Administrative Utilities for the XFS File System
+Des:
<!-- DT:Rich -->
<p>The xfsdump package contains xfsdump, xfsrestore, and a number of
other utilities for administering XFS file systems.
</p><p>
</p><p>
xfsdump examines files in a file system, determines which files need to be
backed up, and copies those files to a specified disk, tape, or other
storage medium.  It uses XFS-specific directives for optimizing the
dump of an XFS file system and also knows how to backup XFS extended
attributes.  Backups created with xfsdump are &quot;endian safe&quot; and can
thus be transferred between Linux machines of different architectures
and also between IRIX machines.
</p><p>
</p><p>
xfsrestore performs the inverse function of xfsdump.  It can restore a
full backup of a file system.  Subsequent incremental backups can then
be layered on top of the full backup.  Single files and directory
subtrees may be restored from full or partial backups.
</p>
-Des:
##----------------------------------------
=Pkg: xfsprogs-devel 3.1.1 0.1.36 x86_64
=Sum: XFS Filesystem-specific Static Libraries and Headers
+Des:
<!-- DT:Rich -->
<p>xfsprogs-devel contains the libraries and header files needed to
develop XFS file system-specific programs.
</p><p>
</p><p>
You should install xfsprogs-devel if you want to develop XFS
file system-specific programs.  If you install xfsprogs-devel, you will
also want to install xfsprogs.
</p>
-Des:
##----------------------------------------
=Pkg: xiterm 0.5.20040304 259.27 x86_64
=Sum: Internationalized Terminal Emulator for X11
+Des:
<!-- DT:Rich -->
<p>Internationalized Terminal Emulator for X11
</p>
-Des:
##----------------------------------------
=Pkg: xli 20061110 1.17 x86_64
=Sum: X11 Image Loading Utility
+Des:
<!-- DT:Rich -->
<p>xli is a version of xloadimage.
</p><p>
This utility will view several types of images under X11, or load
images onto the X11 root window.
</p>
-Des:
##----------------------------------------
=Pkg: xmlstarlet 1.0.1 3.15 x86_64
=Sum: Command Line Tool to Process XML Documents
+Des:
<!-- DT:Rich -->
<p>XMLStarlet is a command line XML toolkit that can be used to transform,
query, validate, and edit XML documents and files using a simple set of shell
commands, which work similarly to &#39;grep&#39;, &#39;sed&#39;, &#39;awk&#39;, &#39;tr&#39;, &#39;diff&#39;, or &#39;patch&#39; on plain text files.
</p>
-Des:
##----------------------------------------
=Pkg: xmlto 0.0.18 182.15 x86_64
=Sum: Tool for Converting XML Files to Various Formats
+Des:
<!-- DT:Rich -->
<p>This is a package for converting XML files to various formats using XSL
stylesheets.  As a processor it depends on xsltproc and as a formatter for print output it makes use of passivetex.
</p>
-Des:
##----------------------------------------
=Pkg: xmset 1.2 119.25 x86_64
=Sum: A Small Command Line Tool for Mouse Configuration
+Des:
<!-- DT:Rich -->
<p>xmset can be used to apply new mouse definitions to the
currently active X session.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-devel-32bit 7.4 8.24.2 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-devel 7.4 8.24.2 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-fonts-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE-devel-32bit 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM-devel-32bit 7.4 1.18 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM-devel 7.4 1.18 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-devel-32bit 7.4 5.5 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-devel 7.4 5.5 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11-unstable-devel 7.3.99 2.20 x86_64
=Sum: X.Org X11 library (unstable devel)
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org X11 library.
</p><p>
THIS PACKAGE IS NOT MEANT FOR GENERAL DEVELOPMENT.
</p><p>
This package provides static libraries for some specific packages that require not-yet-released version of X11.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau-devel-32bit 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-32bit 7.4 1.15 x86_64
=Sum: X.Org Xdmcp library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xdmcp library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-devel-32bit 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-devel-32bit 7.4 1.16.21 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-devel 7.4 1.16.21 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext-unstable-devel 7.3.99 2.20 x86_64
=Sum: Include Files and Libraries mandatory for Development. (unstable)
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p><p>
THIS PACKAGE IS NOT MEANT FOR GENERAL DEVELOPMENT.
</p><p>
This package provides static libraries for some specific packages that require not-yet-released version of X11.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes-devel-32bit 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes-devel 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu-devel-32bit 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu-devel 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp-devel-32bit 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp-devel 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm-devel-32bit 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm-devel 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil-devel-32bit 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil-devel 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender-devel-32bit 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender-devel 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt-devel-32bit 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt-devel 7.4 1.17 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv-devel-32bit 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv-devel 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc-devel-32bit 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb-devel-32bit 7.4 1.20.34 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb-devel 7.4 1.20.34 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb-unstable-devel 7.3.99 2.20 x86_64
=Sum: Include Files and Libraries mandatory for Development (unstable)
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require these.
</p><p>
THIS PACKAGE IS NOT MEANT FOR GENERAL DEVELOPMENT.
</p><p>
This package provides static libraries for some specific packages that require not-yet-released version of X11.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile-devel-32bit 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile-devel 7.4 1.14 x86_64
=Sum: Include Files and Libraries mandatory for Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-proto-devel 7.4 1.24.25.42 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-proto-unstable-devel 7.3.99 2.21.59 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development (unstable version)
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p><p>
THIS PACKAGE IS NOT MEANT FOR GENERAL DEVELOPMENT.
</p><p>
This package provides static libraries for some specific packages that require not-yet-released version of X11.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server-sdk 7.4 27.19.19 x86_64
=Sum: X.Org Server SDK.
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org Server SDK.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-util-devel 7.4 1.15 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-xtrans-devel 7.4 4.25.46 x86_64
=Sum: Include Files and Libraries mandatory for X11 Development.
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains all necessary include files and libraries needed
to develop X11 applications that require these.
</p>
-Des:
##----------------------------------------
=Pkg: xosd 2.2.14 1.27 x86_64
=Sum: X On-Screen Display library
+Des:
<!-- DT:Rich -->
<p>A library for displaying a TV-like on-screen display in X.
</p>
-Des:
##----------------------------------------
=Pkg: xosd-devel 2.2.14 1.27 x86_64
=Sum: X On-Screen Display library development files
+Des:
<!-- DT:Rich -->
<p>development headers and static libraries for xosd
</p>
-Des:
##----------------------------------------
=Pkg: yasm 0.6.2 1.20 x86_64
=Sum: YASM is a complete rewrite of the NASM assembler
+Des:
<!-- DT:Rich -->
<p>YASM is a complete rewrite of the NASM assembler. It is designed from the ground up to allow for multiple syntaxes to be supported (e.g., NASM, TASM, GAS, etc.) in addition to multiple output object formats. Another primary module of the overall design is an optimizer module.
Actually it supports ix86 and AMD64, next will be PowerPC
</p>
-Des:
##----------------------------------------
=Pkg: yast2-CASA 1.7.1535 1.38 x86_64
=Sum: YaST2 - Configuration for Novell CASA (Common Authentication Services Adapter)
+Des:
<!-- DT:Rich -->
<p>Novell CASA (Common Authentication Services Adapter) YaST configuration module. This module is designed to assist administrators to configure and enable CASA through YaST after system installation.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-core-devel 2.17.35 0.2.17 x86_64
=Sum: YaST2 - Include Files and Documentation for Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains include and documentation files for developing
applications using the YaST2 YCP interpreter.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-devel-doc 2.17.92 0.2.27 x86_64
=Sum: YaST2 - Development Scripts and Documentation
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les scripts et les données nécessaires à l&#39;installation
de SUSE Linux avec YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-gtk 2.17.17 0.2.45 x86_64
=Sum: YaST2 - Interface graphique Gtk (GUI)
+Des:
<!-- DT:Rich -->
<p>Une des nombreuses interfaces graphiques disponibles pour YaST2, basé sur GTK et le système X window.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-kdump 2.17.21 0.2.13 x86_64
=Sum: Configuration de kdump
+Des:
<!-- DT:Rich -->
<p>Configuration de kdump
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ldap-server 2.17.34 0.2.59 x86_64
=Sum: YaST2 - OpenLDAP Server Configuration
+Des:
<!-- DT:Rich -->
<p>Provides basic configuration of an OpenLDAP Server over YaST2 Control Center and during installation.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-libyui-devel 2.18.8 1.1.51 x86_64
=Sum: YaST2 - Development Package for User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This is the development package for the YaST2 user interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p><p>
This can be used independently of YaST2 for generic (C++) applications. This package has very few dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ncurses-devel 2.17.17 0.4.38 x86_64
=Sum: YaST2 - character based user interface
+Des:
<!-- DT:Rich -->
<p>This package contains the character based (ncurses) user interface
component for YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-network-devel-doc 2.17.137 0.2.8 x86_64
=Sum: YaST2 - Developer documentation for yast2-network
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient la documetation auto-générée pour yast2-network
</p>
-Des:
##----------------------------------------
=Pkg: yast2-printer-devel-doc 2.17.63 0.2.43 x86_64
=Sum: YaST2 - Developer documentation for yast2-printer
+Des:
<!-- DT:Rich -->
<p>This package contains Developer documentation for YaST2 printer configuration module.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-python-bindings 2.17.4 1.27 x86_64
=Sum: Python bindings for the YaST platform.
+Des:
<!-- DT:Rich -->
<p>The bindings allow YaST modules to be written using the Python language
and also Python scripts can use YaST agents, APIs and modules.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-qt-devel 2.18.11 0.2.12 x86_64
=Sum: Development package for graphical YaST2 user interfaces
+Des:
<!-- DT:Rich -->
<p>Shared libs for the YaST2 Qt user interface.
</p><p>
This is not necessary for developing YaST2 scripts (YCP) -- the YaST2 main
program (y2bignfat) will load those components on demand as plug-ins.
Those plug-ins, however, are available within the base package (yast2-ui-qt).
</p><p>
You only need this package if you really wish to develop new binaries for
YaST2 and dynamically link those against the YaST2 Qt user interface rather
than loading the respective plug-ins.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>This package is not necessary to develop YaST2 scripts (YCP).
</p>
-Ins:
##----------------------------------------
=Pkg: yast2-ruby-bindings 0.3.2.1 0.2.41 x86_64
=Sum: Ruby bindings for the YaST platform
+Des:
<!-- DT:Rich -->
<p>The bindings allow YaST modules to be written using the Ruby language and also
Ruby scripts can use YaST agents, APIs and modules.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-s390 2.17.16 0.2.46 x86_64
=Sum: YaST2 - S/390 Specific Features Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST component for configuration of S/390-specific features.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-scanner 2.17.5 1.38 x86_64
=Sum: YaST2 - Scanner Configuration
+Des:
<!-- DT:Rich -->
<p>This package provides support for the configuration of USB scanners, SCSI scanners, scanners in HP all-in-one devices, and scanning via network (i.e. use a remote scanner via another host in the network).
</p><p>
Parallel port scanners and network scanners (i.e. a scanner which is directly accessible in the network) cannot be configured with this tool, except for such scanners in HP all-in-one devices. Usually those devices must be configured manually. For more information see http://www.sane-project.org/ and the documentation in the package &quot;sane-backends&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-squid 2.17.11 0.3.46 x86_64
=Sum: Configuration de squid
+Des:
<!-- DT:Rich -->
<p>Configuration de squid
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage-devel 2.17.99 0.2.5 x86_64
=Sum: YaST2 - Storage Library Headers and Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains the files for YaST2 that are needed of one wants to
develop a program using libstorage.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ycp-ui-bindings-devel 2.18.5 1.1.60 x86_64
=Sum: YaST2 - Development for YCP Bindings for the YaST2 User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This is the development package that makes the generic YaST2 user interface engine available for YCP applications (YCP is the scripting language in which most YaST2 modules are written).
</p>
-Des:
##----------------------------------------
=Pkg: yodl 1.31.18 1187.20 x86_64
=Sum: Yet One-other Document Language
+Des:
<!-- DT:Rich -->
<p>YODL is a package that consists of programs, some shell scripts, and auxiliary
&quot;lib&quot; files for which hold macro files. The whole purpose of the package is to
provide a simple-to-use and extensible document language that can be used to
convert documents in the YODL format to a variety of other formats. In this
purpose, YODL somewhat resembles generic markup languages.
</p>
-Des:
##----------------------------------------
=Pkg: yum-metadata-parser 1.1.2 107.18 x86_64
=Sum: A fast metadata parser for yum
+Des:
<!-- DT:Rich -->
<p>Analyseur (parser) de meta-données rapide pour yum implémenté en C.
</p>
-Des:
##----------------------------------------
=Pkg: zlib-devel 1.2.3 106.34 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require the provided includes and
libraries.
</p>
-Des:
##----------------------------------------
=Pkg: zlib-devel-32bit 1.2.3 106.34 x86_64
=Sum: Include Files and Libraries mandatory for Development
+Des:
<!-- DT:Rich -->
<p>This package contains all necessary include files and libraries needed
to develop applications that require the provided includes and
libraries.
</p>
-Des:
##----------------------------------------
=Pkg: zvbi-devel 0.2.33 1.17 x86_64
=Sum: VBI decoding library - devel package
+Des:
<!-- DT:Rich -->
<p>include files, static library, ...
</p>
-Des:
##----------------------------------------
=Pkg: glibc 2.11.1 0.17.4 nosrc
=Sum: Standard Shared Libraries (from the GNU C Library)
+Del:
<!-- DT:Rich -->
<p>Ce paquet est absolument indispensable soit pour le fonctionnement
soit pour l&#39;administration de votre système Linux!
</p><p>
Vous ne devez le désinstaller que si êtes sur de savoir exactement ce
que vous faites!
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Les bibliothèques GNU du langage C fournissent les librairies standards les plus importantes utilisées par presque tous les programmes: les bibliothèques standard C, les bibliothèques de maths, les bibliothèques POSIX des thread .
Un système n&#39;est pas fonctionnel sans ces librairies. 
</p>
-Des:
##----------------------------------------
=Pkg: Botan 1.6.4 2.22 src
=Sum: A C++ Crypto Library
+Des:
<!-- DT:Rich -->
<p>Botan is a C++ library that provides support for many common cryptographic
operations, including encryption, authentication, and X.509v3 certificates and
CRLs. A wide variety of algorithms is supported, including RSA, DSA, DES, AES,
MD5, and SHA-1.
</p>
-Des:
##----------------------------------------
=Pkg: ConsoleKit 0.2.10 64.13.6 src
=Sum: System daemon for tracking users, sessions and seats
+Des:
<!-- DT:Rich -->
<p>ConsoleKit is a system daemon for tracking what users are logged
into the system and how they interact with the computer (e.g.
which keyboard and mouse they use).
</p>
-Des:
##----------------------------------------
=Pkg: DirectFB 1.2.3 6.32 src
=Sum: Graphics Library for Framebuffer Devices
+Des:
<!-- DT:Rich -->
<p>DirectFB is a thin library that provides hardware graphics acceleration, input device handling and abstraction, an integrated windowing system with support for translucent windows, and multiple display layers on top of the Linux framebuffer device. It is a complete hardware abstraction layer with software fallbacks for every graphics operation that is not supported by the underlying hardware. DirectFB adds graphical power to embedded systems and sets a new standard for graphics under Linux.
</p>
-Des:
##----------------------------------------
=Pkg: IlmBase 1.0.1 40.22 src
=Sum: Base library for ILM software (OpenEXR)
+Des:
<!-- DT:Rich -->
<p>Base library for Industrial Light &amp; Magic software (OpenEXR).
<ul>
<li>Half is a class that encapsulates our 16-bit floating-point format.
</li><li>IlmThread is a thread abstraction library for use with OpenEXR and other software packages.  It currently supports pthreads and Windows threads.
</li><li>Imath implements 2D and 3D vectors, 3x3 and 4x4 matrices, quaternions and other useful 2D and 3D math functions.
</li><li>Iex is an exception-handling library.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: LibVNCServer 0.9.1 154.24 src
=Sum: VNC Development Library
+Des:
<!-- DT:Rich -->
<p>VNC is a set of programs using the RFB (Remote Frame Buffer) protocol. They
are designed to &quot;export&quot; a frame buffer via the network.
It is already in wide use for administration, but it is not that easy to program a server yourself.
This has been changed by LibVNCServer.
</p><p>
X.org already has a virtual Xvnc server which you can start as an own
screen (e.g. :1) and connect to with a VNC client (e.g. vncviewer from
tightvnc).
The x11vnc binary (that allows you to export the window of a real running
X11 server) has been split off into its own package on 2007-07-16.
</p>
-Des:
##----------------------------------------
=Pkg: Mesa 7.7 0.4.41 src
=Sum: Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL
+Des:
<!-- DT:Rich -->
<p>Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL.* To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc.(SGI). However, the author does not possess an OpenGL license from SGI, and makes no claim that Mesa is in any way a compatible replacement for OpenGL or associated with SGI. Those who want a licensed implementation of OpenGL should contact a licensed vendor.
</p><p>
Please do not refer to the library as MesaGL (for legal reasons). It&#39;s just Mesa or The Mesa 3-D graphics library.
<ul>
<li>OpenGL is a trademark of Silicon Graphics Incorporated.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: NetworkManager 0.7.0.r4359 15.22.49 src
=Sum: Network Link Manager and User Applications
+Des:
<!-- DT:Rich -->
<p>NetworkManager attempts to keep an active network connection available at all
times.  The point of NetworkManager is to make networking configuration and
setup as painless and automatic as possible.  If using DHCP, NetworkManager is
intended to replace default routes, obtain IP addresses from a DHCP server, and
change name servers whenever it sees fit.
</p>
-Des:
##----------------------------------------
=Pkg: NetworkManager-kde 0.7r848570 31.16 src
=Sum: KNetworkManager application for use with NetworkManager
+Des:
<!-- DT:Rich -->
<p>KNetworkManager is a system tray applet for controlling network connections on systems that use the NetworkManager daemon.
</p>
-Des:
##----------------------------------------
=Pkg: OpenEXR 1.6.1 83.17.1 src
=Sum: Library to Handle EXR Pictures in 16-Bit Floating-Point Format
+Des:
<!-- DT:Rich -->
<p>OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light &amp; Magic for use in computer imaging applications.
<ul>
<li>exrheader, a utility for dumping header information
</li><li>exrstdattr, a utility for modifying OpenEXR standard attributes
</li><li>exrmaketiled, for generating tiled and rip/mipmapped images
</li><li>exrenvmap, for creating OpenEXR environment maps
</li><li>exrmakepreview, for creating preview images for OpenEXR files
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenIPMI 2.0.16 0.3.29 src
=Sum: OpenIPMI
+Des:
<!-- DT:Rich -->
<p>OpenIPMI is an effort to create a full-function IPMI system to
allow full access to all IPMI information on a server and to
abstract it to a level that makes it easy to use.
</p><p>
OpenIPMI consists of two main parts: a device driver that is
included in the Linux kernel and a user-level library that
provides a higher-level abstraction of IPMI and generic
services that can be used on any operation system. This package
contains the user-level library part. This OpenIPMI library
also includes the ipmicmd program, a small program that lets
you inject and receive messages.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-artwork 3.2.0.9 0.2.27 src
=Sum: OpenOffice.org Atrwork Source Package
+Des:
<!-- DT:Rich -->
<p>This source package is used to build the OpenOffice.org artwork development package.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-group1 3.2.0.9 0.2.24 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-group2 3.2.0.9 0.2.24 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-group3 3.2.0.9 0.2.24 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-group4 3.2.0.9 0.2.24 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-help-group5 3.2.0.9 0.2.24 src
=Sum: A Free Office Suite (Framework)
+Des:
<!-- DT:Rich -->
<p>Openoffice.org is a comprehensive office package featuring a word processor, a spreadsheet, a presentation program, and much more.
This package provides only the basic framework. You have to install the additional modules to get the required functionality, see packages:
<ul>
<li>OpenOffice_org-base
</li><li>OpenOffice_org-calc
</li><li>OpenOffice_org-draw
</li><li>OpenOffice_org-impress
</li><li>OpenOffice_org-math
</li><li>OpenOffice_org-writer
</li></ul>
Some optional features are provided by extra packages, for example:
<ul>
<li>OpenOffice_org-mailmerge
</li><li>OpenOffice_org-filters
</li><li>OpenOffice_org-kde
</li><li>OpenOffice_org-gnome
</li></ul>
Non-English localizations are provided by extra packges as well, for example:
<ul>
<li>OpenOffice_org-de
</li><li>OpenOffice_org-fr
</li><li>OpenOffice_org-it
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-l10n 3.2.0.9 0.2.24 src
=Sum: A Source Package for OpenOffice.org Localizations
+Des:
<!-- DT:Rich -->
<p>This source package is used to build the OpenOffice.org artwork development package.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-templates-labels 1.0 2.22 src
=Sum: Label Templates for OpenOffice.org
+Des:
<!-- DT:Rich -->
<p>This source package includes a collection of label templates for OpenOffice.org.
</p>
-Des:
##----------------------------------------
=Pkg: OpenOffice_org-thesaurus 20070719 3.18 src
=Sum: A Source Package for OpenOffice.org Thesaurus Dictionaries
+Des:
<!-- DT:Rich -->
<p>This source package is used to build OpenOffice.org thesaurus dictionaries.
</p>
-Des:
##----------------------------------------
=Pkg: PackageKit 0.3.14 2.12.105 src
=Sum: Simple software installation management software
+Des:
<!-- DT:Rich -->
<p>PackageKit is a system designed to make installing and updating software on your computer easier.  The primary design goal is to unify all the software graphical tools used in different distributions, and use some of the latest technology like PolicyKit to make the process suck less.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit 0.9 14.34.9 src
=Sum: Authorization Toolkit
+Des:
<!-- DT:Rich -->
<p>PolicyKit is a toolkit for defining and handling authorizations. It is used for allowing unprivileged processes to speak to privileged processes.
</p>
-Des:
##----------------------------------------
=Pkg: PolicyKit-gnome 0.9.2 13.7.46 src
=Sum: PolicyKit integration for the GNOME desktop
+Des:
<!-- DT:Rich -->
<p>PolicyKit-gnome provides a GNOME integration library and tools for PolicyKit including an Authentication Agent that matches the look and feel of the GNOME desktop.
</p>
-Des:
##----------------------------------------
=Pkg: SDL 1.2.13 104.32 src
=Sum: Simple DirectMedia Layer Library
+Des:
<!-- DT:Rich -->
<p>This is the &quot;Simple DirectMedia Layer&quot; library. It provides a generic
API for access to audio, keyboard, mouse, and display framebuffer
across multiple platforms.
</p>
-Des:
##----------------------------------------
=Pkg: a2ps 4.13 1326.33 src
=Sum: Convertit des textes ASCII au format PostScript
+Des:
<!-- DT:Rich -->
<p>a2ps converts ASCII text into PostScript. This feature is used by
apsfilter, for example, to pretty-print ASCII text.
</p><p>
Warning: a2ps is not able to convert complex unicode (UTF-8)
text to PostScript.  Only language text which can be converted
from UTF-8 to latin encodings are supported.
</p>
-Des:
##----------------------------------------
=Pkg: acl 2.2.47 30.34.29 src
=Sum: Commands for Manipulating POSIX Access Control Lists
+Des:
<!-- DT:Rich -->
<p>getfacl and setfacl commands for retrieving and setting POSIX access control lists.
</p>
-Des:
##----------------------------------------
=Pkg: adns 1.4 73.21 src
=Sum: Advanced Easy-to-Use Asynchronous-Capable DNS Utilities
+Des:
<!-- DT:Rich -->
<p>adns includes a collection of useful DNS resolver utilities.
</p>
-Des:
##----------------------------------------
=Pkg: alsa 1.0.18 16.9.29 src
=Sum: Advanced Linux Sound Architecture
+Des:
<!-- DT:Rich -->
<p>ALSA stands for Advanced Linux Sound Architecture.  It supports many PCI, ISA PnP  and USB sound cards.
</p><p>
This package contains the ALSA init scripts to start the sound system on your Linux box.  To set it up, run yast2 or alsaconf.
</p>
-Des:
##----------------------------------------
=Pkg: anthy 9100 166.31 src
=Sum: Kana-Kanji Conversion Engine
+Des:
<!-- DT:Rich -->
<p>Anthy (previously called &#39;Ancy&#39;):
</p><p>
Canna, FreeWnn, and others are famous Kana-Kanji conversion engines
usable for Unix on PCs. They were originally developed for
Japanese Unix workstations around 1990 and development has
practically stopped.  Therefore, the Heke Project is writing a free
conversion engine from scratch (apart from the dictionary, which is
developed outside of the Heke Project).
</p>
-Des:
##----------------------------------------
=Pkg: apt 0.5.15lorg3.2 123.31 src
=Sum: A port of Debian's apt tools for RPM based distributions
+Des:
<!-- DT:Rich -->
<p>A port of Debian&#39;s apt tools for RPM based distributions.It provides the
apt-get utility that provides a safe and simple way to install and upgrade
packages. APT features complete installation ordering, multiple source
capability and several other unique features.
</p>
-Des:
##----------------------------------------
=Pkg: arpwatch 2.1a15 131.21 src
=Sum: Arpwatch Keeps Track of Ethernet and IP Address Pairings
+Des:
<!-- DT:Rich -->
<p>Arpwatch keeps track of Ethernet and IP address pairings.
It logs activity to syslog and reports certain changes via e-mail.
</p>
-Des:
##----------------------------------------
=Pkg: aspell 0.60.6 26.22 src
=Sum: Un correcteur orthographique gratuit et opensource
+Des:
<!-- DT:Rich -->
<p>GNU Aspell is a spell checker designed to eventually replace Ispell.
It can be used as a library or as an independent spell checker.
</p><p>
Its main feature is that it does a much better job of coming up with
possible suggestions than just about any other spell checker available
for the English language, including Ispell and Microsoft Word. It
also has many other technical enhancements over Ispell, such as using
shared memory for dictionaries and intelligently handling personal
dictionaries when more than one Aspell process is open at once.
</p>
-Des:
##----------------------------------------
=Pkg: at-spi 1.28.1 0.1.161 src
=Sum: Assistive Technology Service Provider Interface
+Des:
<!-- DT:Rich -->
<p>This library, based on ATK, is a general interface for applications to make use of the accessibility toolkit.
</p>
-Des:
##----------------------------------------
=Pkg: atk 1.28.0 1.2.28 src
=Sum: An Accessibility ToolKit
+Des:
<!-- DT:Rich -->
<p>The ATK library provides a set of accessibility interfaces. By supporting the ATK interfaces, an application or toolkit can be used with screen readers, magnifiers, and alternate input devices.
</p>
-Des:
##----------------------------------------
=Pkg: attr 2.4.43 1.18 src
=Sum: Commands for Manipulating Extended Attributes
+Des:
<!-- DT:Rich -->
<p>A set of tools for manipulating extended attributes on file system
objects, in particular getfattr(1) and setfattr(1).
An attr(1) command is also provided, which is largely compatible
with the SGI IRIX tool of the same name.
</p>
-Des:
##----------------------------------------
=Pkg: audiofile 0.2.6 142.11.42 src
=Sum: Une bibliothèque de fichiers audio
+Des:
<!-- DT:Rich -->
<p>This audio file library is an implementation of the SGI audio file library.
At present, not all features of the SGI audio file library are
implemented.
</p><p>
</p><p>
This library allows the processing of audio data to and from audio
files of many common formats (currently AIFF, AIFC, WAVE, and
NeXT/Sun).
</p>
-Des:
##----------------------------------------
=Pkg: audit 1.7.7 5.16 src
=Sum: Outils espace utilisateur pour auditer le noyau 2.6
+Des:
<!-- DT:Rich -->
<p>The audit package contains the user space utilities for storing and processing the audit records generated by the audit subsystem in the Linux 2.6 kernel.
</p>
-Des:
##----------------------------------------
=Pkg: audit-secondary 1.7.7 5.25 src
=Sum: Python Bindings for libaudit
+Des:
<!-- DT:Rich -->
<p>The audit-libs-python package contains the bindings for using libaudit by python.
</p>
-Des:
##----------------------------------------
=Pkg: avahi 0.6.23 11.19.22 src
=Sum: Service D-BUS pour Zeroconf et Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: avahi-glib2 0.6.23 13.19.26 src
=Sum: Service D-BUS pour Zeroconf et Bonjour
+Des:
<!-- DT:Rich -->
<p>Avahi is an implementation of the DNS Service Discovery and Multicast DNS specifications for Zeroconf Computing.
It uses D-BUS for communication between user applications and a system daemon. The daemon is used to coordinate application efforts in caching replies, necessary to minimize the traffic imposed on networks.
</p><p>
The Avahi mDNS responder is now complete with features, implementing all
MUSTs and the majority of the SHOULDs of the mDNS and DNS-SD RFCs.
It passes all tests in the Apple Bonjour conformance test suite.
In addition, it supports some nifty things, like correct mDNS reflection across LAN segments.
</p>
-Des:
##----------------------------------------
=Pkg: babl 0.0.22 4.22 src
=Sum: Dynamic Pixel Format Translation Library
+Des:
<!-- DT:Rich -->
<p>babl is a dynamic, any to any, pixel format translation library.
</p><p>
It allows converting between different methods of storing pixels known as pixel formats that have with different bitdepths and other data representations, color models and component permutations.
</p><p>
A vocabulary to formulate new pixel formats from existing primitives is provided as well as the framework to add new color models and data types.
</p>
-Des:
##----------------------------------------
=Pkg: bash 3.2 147.9.13 src
=Sum: Le Bourne Again shell GNU
+Des:
<!-- DT:Rich -->
<p>Bash est un interpréteur de commandes compatible sh qui exécute
des commandes à partir de l&#39;entrée standard ou d&#39;un fichier. Bash
est en outre doté de fonctions du Korn-shell et du C-shell (ksh et csh).
Bash a été conçu pour répondre au standard IEEE Posix Shell and Tools
Specification (IEEE Working Group 1003.2).
</p>
-Des:
##----------------------------------------
=Pkg: bea-stax 1.2.0 5.24 src
=Sum: Streaming API for XML
+Des:
<!-- DT:Rich -->
<p>The Streaming API for XML (StAX) is a groundbreaking
new Java API for parsing and writing XML easily and
efficiently.
</p>
-Des:
##----------------------------------------
=Pkg: bind 9.5.0P2 20.7.1 src
=Sum: Serveur de noms de domaine DNS (named)
+Des:
<!-- DT:Rich -->
<p>Berkeley Internet Name Domain (BIND) est le serveur de DNS de référence. Ce paquet fournit les composants pour opérer un serveur DNS. Serveur de noms BIND9 (nouvelle version)
</p>
-Des:
##----------------------------------------
=Pkg: binutils 2.20.0 0.7.9 src
=Sum: GNU Binutils
+Des:
<!-- DT:Rich -->
<p>Utilitaires pour le compilateur C: ar, as, gprof, ld,
nm, objcopy, objdump, ranlib, size, strings, strip.
</p><p>
Ces utilitaires sont nécessaires pour compiler des programmes
ou le noyau.
</p>
-Des:
##----------------------------------------
=Pkg: blocxx 2.1.0.342 122.6 src
=Sum: BlocXX--C++ : Cadre de développement d'applications
+Des:
<!-- DT:Rich -->
<p>BloCXX est un cadre général de développement d&#39;applications C++. Ce paquet contient la bibliothèque  BloCXX.
</p>
-Des:
##----------------------------------------
=Pkg: bluez 4.51 1.1.97 src
=Sum: Pile bluetooth pour Linux
+Des:
<!-- DT:Rich -->
<p>La pile bluetooth pour Linux.
</p>
-Des:
##----------------------------------------
=Pkg: boost 1.36.0 11.17 src
=Sum: Bibliothèques Boost C++
+Des:
<!-- DT:Rich -->
<p>Boost provides free peer-reviewed portable C++ source
libraries. The emphasis is on libraries that work well with the C++
Standard Library. One goal is to establish &quot;existing practice&quot; and
provide reference implementations so that the Boost libraries are
suitable for eventual standardization. Some of the libraries have
already been proposed for inclusion in the C++ Standards Committee&#39;s
upcoming C++ Standard Library Technical Report.
</p><p>
Although Boost was begun by members of the C++ Standards Committee
Library Working Group, membership has expanded to include nearly two
thousand members of the C++ community at large.
</p><p>
This package is mainly needed for updating from a prior version, the dynamic libraries are found in their respective package. For development using Boost, you
also need the boost-devel package. For documentation, see the boost-doc package.
</p>
-Des:
##----------------------------------------
=Pkg: bootsplash-branding-openSUSE 3.1 47.22 src
=Sum: Thème de démarrage par défaut de SuSE.
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient le thème bootsplash par défaut pour le démarrage de SUSE.
Pour plus d&#39;information, veuillez consulter le site http://www.bootsplash.org/.
</p>
-Des:
##----------------------------------------
=Pkg: bsdtar 2.5.5 5.19 src
=Sum: Bsdtar is a programme that can create and read several different streaming archive formats
+Des:
<!-- DT:Rich -->
<p>Libarchive est une bibliothèque qui permet de créer et de lire des archives dans différents formats, incluant les plus populaires variantes de tar et de cpio. Il peut aussi écrire des archives shar et lire des images de CD ISO9660. Le programme Le programme bsdtar est une implantation de tar(1) qui est bâti à partir de libarchive. A ces débuts, il permettait de tester libarchive, mais a évolué et est maintenant devenu le tar standard pour FreeBSD 5 et 6.
</p><p>
Ce paquet contient l&#39;utilitaire bsdtar.
</p>
-Des:
##----------------------------------------
=Pkg: bug-buddy 2.28.0 1.2.22 src
=Sum: Outil GNOME de rapport des anomalies
+Des:
<!-- DT:Rich -->
<p>Bug Buddy pour l&#39;environnement GNOME 2.x facilite autant que possible la soumission de rapports d&#39;anomalies. Il peut générer des traces de crash et inclure cette information dans le rapport d&#39;évênement.
</p>
-Des:
##----------------------------------------
=Pkg: bzip2 1.0.5 34.246 src
=Sum: Programme de compression de fichiers
+Des:
<!-- DT:Rich -->
<p>Bzip2 est un programme très performant pour la compression de fichiers.
</p>
-Des:
##----------------------------------------
=Pkg: cairo 1.8.8 2.1.48 src
=Sum: Vector Graphics Library with Cross-Device Output Support
+Des:
<!-- DT:Rich -->
<p>Cairo is a vector graphics library with cross-device output support. Currently supported output targets include the X Window System, in-memory image buffers, and PostScript. Cairo is designed to produce identical output on all output media while taking advantage of display hardware acceleration when available.
</p>
-Des:
##----------------------------------------
=Pkg: cairomm 1.6.4 2.7 src
=Sum: C++ Interface for Cairo
+Des:
<!-- DT:Rich -->
<p>This package provides a C++ interface for Cairo.
</p>
-Des:
##----------------------------------------
=Pkg: cdparanoia 3.10.2 2.1.42 src
=Sum: A Program for Extracting, Verifying, and Fixing Audio Tracks from CDs
+Des:
<!-- DT:Rich -->
<p>This CDDA reader distribution (&#39;cdparanoia&#39;) reads audio from the
CD-ROM directly as data and writes the
data to a file or pipe as .wav, .aifc, or raw 16-bit linear PCM.
</p><p>
This is a beta release. See http://www.xiph.org/paranoia/.
</p>
-Des:
##----------------------------------------
=Pkg: check 0.9.5 63.21 src
=Sum: Unit Test Framework for C
+Des:
<!-- DT:Rich -->
<p>Check is a unit test framework for C. It features a simple interfacefor defining unit tests, limitating the developer the less possible. Tests are run in a separate address space, so Check cancatch both, assertion failures and code errors that cause segmentationfaults or other signals. The output of unit tests can be used within source code editors and IDEs.
</p>
-Des:
##----------------------------------------
=Pkg: chmlib 0.39 101.22 src
=Sum: A library for dealing with ITSS/CHM files
+Des:
<!-- DT:Rich -->
<p>CHMLIB is a library for dealing with Microsoft ITSS/CHM format files.
</p>
-Des:
##----------------------------------------
=Pkg: cloog 0.15.8+ppl 0.2.22 src
=Sum: The Chunky Loop Generator
+Des:
<!-- DT:Rich -->
<p>CLooG is a free software and library to generate code for scanning Z-polyhedra.
It is used by the GCC Graphite optimization framework.
</p>
-Des:
##----------------------------------------
=Pkg: clucene-core 0.9.21 1.15 src
=Sum: CLucene is a C++ port of Lucene
+Des:
<!-- DT:Rich -->
<p>CLucene is a C++ port of Lucene.
It is a high-performance, full-featured text search engine written in C++.
CLucene is faster than lucene as it is written in C++.
</p>
-Des:
##----------------------------------------
=Pkg: clutter 1.0.6 1.1.66 src
=Sum: The clutter library
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: clutter-gtk 0.10.2 2.1.88 src
=Sum: The Clutter library for Gtk
+Des:
<!-- DT:Rich -->
<p>Clutter is an open source software library for creating fast, visually rich and animated graphical user interfaces.
Gtk+ support.
</p>
-Des:
##----------------------------------------
=Pkg: colorblind 0.0.1 1.1.43 src
=Sum: Pixel Filter for colorblind accessibility
+Des:
<!-- DT:Rich -->
<p>This library provides an unified way to recalculate colors
in order to present alternative views on images for colorblind
people.
</p>
-Des:
##----------------------------------------
=Pkg: coolkey 1.1.0 22.24 src
=Sum: CoolKey PKCS #11 PKI Module for Smart Cards
+Des:
<!-- DT:Rich -->
<p>Linux Driver support for the CoolKey and CAC products.
CoolKeys are part of a complete PKI solution that provides smart card login, single sign-on, secure messaging, and secure email access. In the complete solution, users are issued CoolKeys by their employer, ISP, bank, or other parties. When the user plugs the keys in for the first time, the keys are automatically provisioned with certificates, keys, and a PIN, unique for that user by the Red Hat Certificate System. Once the CoolKey is provisioned, the user can take the key to any system and use it to login (authenticate), send and receive signed and encrypted email, or participate in secure messaging or IRC communication. Using a CoolKey should be as easy as starting a car.
To accomplish that vision, we are focusing on building complete support for CoolKey on exactly one token. As the system is built out, we can add token support. CoolKeys are based on JavaCard 1.2. We are testing with Axalto Egate Cyberflex cards, which are available in both smart card and USB Fob form factors.
</p>
-Des:
##----------------------------------------
=Pkg: cracklib 2.8.12 56.9.9 src
=Sum: Full Dictionary for cracklib
+Des:
<!-- DT:Rich -->
<p>CrackLib teste les mots de passe afin de vérifier s&#39;ils répondent à certains critères de sécurité. Cracklib peut être utilisé pour éviter l&#39;emploi de mots de passe trop simples. Ce paquet contient un fichier dictionnaire complet utilisé par cracklib.
</p>
-Des:
##----------------------------------------
=Pkg: cryptsetup 1.0.5_SVNr46 58.30.38 src
=Sum: Set Up dm-crypt Based Encrypted Block Devices
+Des:
<!-- DT:Rich -->
<p>cryptsetup is used to conveniently set up dm-crypt based device-mapper targets. It allows to set up targets to read cryptoloop compatible volumes as well as LUKS formatted ones. The package additionally includes support for automatically setting up encrypted volumes at boot time via the config file /etc/crypttab.
</p>
-Des:
##----------------------------------------
=Pkg: csync 0.41.98 1.21 src
=Sum: A user level bidirectional client only file synchronizer
+Des:
<!-- DT:Rich -->
<p>csync is an implementation of a file synchronizer which provides the feature of roaming home directories for Linux clients. csync makes use of libsmbclient in Samba/Windows environments.
</p>
-Des:
##----------------------------------------
=Pkg: ctdb 1.0.105 0.4.5 src
=Sum: Clustered TDB
+Des:
<!-- DT:Rich -->
<p>CTDB is the clustered database used by Samba.
</p>
-Des:
##----------------------------------------
=Pkg: cups 1.3.9 8.30.1 src
=Sum: The Common UNIX Printing System
+Des:
<!-- DT:Rich -->
<p>The Common UNIX Printing System provides a portable printing layer for
UNIX® operating systems like BSD lp or lprng. CUPS provides some additional
features.
</p><p>
http://www.cups.org
</p>
-Des:
##----------------------------------------
=Pkg: cups-drivers 1.3.9 2.31 src
=Sum: Drivers for the Common UNIX Printing System
+Des:
<!-- DT:Rich -->
<p>This package contains free printer driver descriptions for
CUPS. It contains a recent snapshot of the printer database
from http://www.linuxprinting.org.
</p>
-Des:
##----------------------------------------
=Pkg: curl 7.19.0 11.24.25 src
=Sum: A Tool for Transferring Data from URLs
+Des:
<!-- DT:Rich -->
<p>Curl is a client to get documents and files from or send documents
to a server using any of the supported protocols
(HTTP, HTTPS, FTP, FTPS, TFTP, DICT, TELNET, LDAP, or FILE).
The command is designed to work without user interaction
or any kind of interactivity.
</p>
-Des:
##----------------------------------------
=Pkg: cvs 1.12.12 144.21 src
=Sum: Concurrent Versions System
+Des:
<!-- DT:Rich -->
<p>CVS is a front-end to the <a href="pkg://rcs"> Revision Control System</a>
included in the standard Linux distributions.
PCL-CVS, an <a href="pkg://emacs"> Emacs</a> front-end for CVS, is also included.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-imapd 2.3.11 60.21.1 src
=Sum: An IMAP and POP Mail Server
+Des:
<!-- DT:Rich -->
<p>The Cyrus IMAP server.
</p>
-Des:
##----------------------------------------
=Pkg: cyrus-sasl 2.1.22 182.20.1 src
=Sum: Implementation of Cyrus SASL API
+Des:
<!-- DT:Rich -->
<p>This is the Cyrus SASL API. It can be used on the client
or server side to provide authentication. See RFC 2222 for more
information.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1 1.2.10 3.11.29 src
=Sum: D-Bus Message Bus System
+Des:
<!-- DT:Rich -->
<p>D-Bus is a message bus system, a simple way for applications to talk to one another. D-Bus supplies both a system daemon and a per-user-login-session daemon. Also, the message bus is built on top of a general one-to-one message passing framework, which can be used by any two apps to communicate directly (without going through the message bus daemon).
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-glib 0.76 34.5.49 src
=Sum: GLib-based library for using D-Bus
+Des:
<!-- DT:Rich -->
<p>D-Bus add-on library to integrate the standard D-Bus library with the GLib
thread abstraction and main loop.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-python 0.83.0 27.1.43 src
=Sum: Python bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>Python bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: dbus-1-qt3 0.62 223.1.43 src
=Sum: QT3/KDE bindings for D-Bus
+Des:
<!-- DT:Rich -->
<p>QT3/KDE bindings for D-Bus.
</p>
-Des:
##----------------------------------------
=Pkg: device-mapper 1.02.27 8.17.20 src
=Sum: Device Mapper Tools
+Des:
<!-- DT:Rich -->
<p>Programs, libraries, and man pages for configuring and using the device mapper.
</p>
-Des:
##----------------------------------------
=Pkg: dhcp 3.1.3.ESV 0.3.38 src
=Sum: Common Files Used by ISC DHCP Software
+Des:
<!-- DT:Rich -->
<p>This package contains common files used by both the ISC DHCP server
(&quot;dhcp-server&quot; package) and client (&quot;dhcp-client&quot;).
</p>
-Des:
##----------------------------------------
=Pkg: dhcpv6 1.0.22 3.19.16 src
=Sum: Client et Serveur DHCP pour IPv6
+Des:
<!-- DT:Rich -->
<p>A stateful address autoconfiguration
protocol for IPv6, labelled DHCPv6.
This package contains the server and the client.
</p>
-Des:
##----------------------------------------
=Pkg: dicts 1.5 364.7 src
=Sum: Dictionnaire ispell
+Des:
<!-- DT:Rich -->
<p>Ce paquets contient les sources des dictionnaires ispell suivants:
</p><p>
pour l&#39;allemand    (déjà compilé pour ispell dans le paquet ispell-german)
</p><p>
pour le nouvel allemand (déjà compilé pour ispell dans le paquet ispell-ngerman)
</p><p>
pour le suisse-allemand (déjà compilé pour ispell dans le paquet ispell-nswiss)
</p><p>
pour le danois     (déjà compilé pour ispell dans le paquet ispell-danish)
</p><p>
pour l&#39;espagnol    (déjà compilé pour ispell dans le paquet ispell-spanish)
</p><p>
pour le français   (déjà compilé pour ispell dans le paquet ispell-french)
</p><p>
pour l&#39;italien     (déjà compilé pour ispell dans le paquet ispell-italian)
</p><p>
pour le néerlandais déjà compilé pour ispell dans le paquet ispell-dutch)
</p><p>
pour le suédois    (déjà compilé pour ispell dans le paquet ispell-swedish)
</p><p>
pour le norvégien  (déjà compilé pour ispell dans le paquet ispell-norsk)
</p><p>
pour le portugais  (déjà compilé pour ispell dans le paquet ispell-portuguese)
</p><p>
pour le catalan    (déjà compilé pour ispell dans le paquet ispell-catalan)
</p><p>
pour le tchèque    (déjà compilé pour ispell dans le paquet ispell-czech)
</p><p>
pour le polonais   (déjà compilé pour ispell dans le paquet ispell-polish)
</p><p>
pour le grec       (déjà compilé pour ispell dans le paquet ispell-greek)
</p><p>
pour le russe      (déjà compilé pour ispell dans le paquet ispell-russian)
</p><p>
</p><p>
Lisez les fichiers README sous /usr/src/dicts.
</p>
-Des:
##----------------------------------------
=Pkg: digikam 0.9.4 51.33 src
=Sum: Un gestionnaire de photo KDE
+Des:
<!-- DT:Rich -->
<p>digiKam est un gestionnaire de photo pour KDE, qui vous permet d&#39;importer et d&#39;organiser facilement vos photos numériques. Les photos peuvent être organisées en albums, qui sont classés chronologiquement, by directory layout, ou selon une organisation personnelle. Une interface simple d&#39;utilisation vous permet de connecter votre appareil photo et prévisualiser, télécharger, ou effacer vos images.
</p>
-Des:
##----------------------------------------
=Pkg: djvulibre 3.5.21 1.24 src
=Sum: Une implémentation Open Source de DjVu
+Des:
<!-- DT:Rich -->
<p>DjVu is a Web-centric format and software platform for distributing documents
and images. DjVuLibre is an open source (GPL) implementation of DjVu,
including viewers, browser plug-ins, decoders, simple encoders, and utilities.
DjVu can advantageously replace PDF, PS, TIFF, JPEG, and GIF for distributing
scanned documents, digital documents, or high-resolution pictures. DjVu content
downloads faster, displays and renders faster, looks nicer on a screen, and
consumes less client resources than competing formats. DjVu images display
instantly and can be smoothly zoomed and panned with no lengthy rerendering.
DjVu is used by hundreds of academic, commercial, governmental, and
noncommercial Web sites around the world.
</p>
-Des:
##----------------------------------------
=Pkg: dmapi 2.2.8 96.18 src
=Sum: Data Management API Runtime Environment
+Des:
<!-- DT:Rich -->
<p>This package contains files required by system software using the Data Management API.
(DMAPI).  This is used to implement the interface defined in the
X/Open document:  Systems Management: Data Storage Management
(XDSM) API dated February 1997.  This interface is implemented
by the libdm library.
</p>
-Des:
##----------------------------------------
=Pkg: e2fsprogs 1.41.9 2.1.51 src
=Sum: Utilitaires pour le système de fichiers ext2
+Des:
<!-- DT:Rich -->
<p>Programmes pour la création et la gestion de systèmes de fichiers ext2 et ext3
sous Linux. Ce paquet contient les programmes suivants: chattr, lsattr,
mke2fs, mklost+found, tune2fs, e2fsck et badblocks.
</p>
-Des:
##----------------------------------------
=Pkg: elfutils 0.137 8.22.58 src
=Sum: Higher-level library to access ELF
+Des:
<!-- DT:Rich -->
<p>This package provides a higher-level library to access ELF files.
This is a part of elfutils package.
</p>
-Des:
##----------------------------------------
=Pkg: emacs 22.3 4.32.4 src
=Sum: Paquetage de base GNU Emacs
+Des:
<!-- DT:Rich -->
<p>Paquetage de base pour l&#39;éditeur GNU Emacs.
Nécessite <a href="pkg://emacs-x11">emacs-x11</a>
ou <a href="pkg://emacs-nox">emacs-nox</a>.
</p>
-Des:
##----------------------------------------
=Pkg: enchant 1.4.2 16.26 src
=Sum: Generic Spell Checking Library
+Des:
<!-- DT:Rich -->
<p>A library providing an efficient extensible abstraction for dealing with different spell checking libraries.
</p>
-Des:
##----------------------------------------
=Pkg: eog 2.28.2 0.1.150 src
=Sum: Visionneur d'images Eye of GNOME pour le bureau GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Eye of GNOME est un visionneur particulièrement rapide. Il peut être utilisé comme module de Nautilus ou séparément. Cette version est compilée pour le bureau GNOME 2.x.
</p>
-Des:
##----------------------------------------
=Pkg: epiphany 2.28.2 0.1.71 src
=Sum: Navigateur Web GNOME basé sur le moteur de rendu Mozilla
+Des:
<!-- DT:Rich -->
<p>Epiphany est un navigateur internet pour le bureau GNOME. Ses fondements sont la simplicité et le respect des standards.
</p>
-Des:
##----------------------------------------
=Pkg: esound 0.2.41 3.1.41 src
=Sum: A sound daemon for Enlightenment and GNOME
+Des:
<!-- DT:Rich -->
<p>A multiplexing and caching sound daemon. It can use ALSA or
OSS for sound output. Many projects, including Enlightenment and GNOME,
use esound to play and record their sounds.
</p>
-Des:
##----------------------------------------
=Pkg: espeak 1.39 2.29 src
=Sum: Système de synthèse de la parole à partir de texte pour l'anglais, l'allemand et d'autres langues
+Des:
<!-- DT:Rich -->
<p>espeak est un système de synthèse de la parole multilingue.
</p>
-Des:
##----------------------------------------
=Pkg: evince 2.28.2 0.2.68 src
=Sum: Visionneur de documents pour GNOME
+Des:
<!-- DT:Rich -->
<p>Evince est un visionneur de documents capables d&#39;afficher les formats PDF et PostScript. Pour plus d&#39;informations à propos d&#39;Evince, veuillez consulter le site http://www.gnome.org/projects/evince/.
</p>
-Des:
##----------------------------------------
=Pkg: evoldap2-client 2.4.12 4.19 src
=Sum: NTLM patched OpenLDAP library for Evolution
+Des:
<!-- DT:Rich -->
<p>OpenLDAP Client Utilities
</p><p>
This package contains the NTLM patched OpenLDAP client utilities for Evolution
</p>
-Des:
##----------------------------------------
=Pkg: evolution-data-server 2.28.2 0.10.9 src
=Sum: Serveur de données Evolution
+Des:
<!-- DT:Rich -->
<p>Le serveur de données Evolution fournit un emplacement central pour votre carnet d&#39;adresses et votre agenda pour le bureau GNOME
</p>
-Des:
##----------------------------------------
=Pkg: exempi 2.0.2 2.22 src
=Sum: XMP support library
+Des:
<!-- DT:Rich -->
<p>XMP parsing and IO library
</p>
-Des:
##----------------------------------------
=Pkg: exiv2 0.17.1 31.20 src
=Sum: Tool to access image Exif metadata
+Des:
<!-- DT:Rich -->
<p>Exiv2 is a command line utility to access image metadata from tags like Exif.
</p>
-Des:
##----------------------------------------
=Pkg: expat 2.0.1 88.26.1 src
=Sum: Outils d'analyse syntaxique XML
+Des:
<!-- DT:Rich -->
<p>Expat is an XML 1.0 parser written in C. It aims to be fully
conformant. It is currently not a validating XML processor. The current
production version of expat can be downloaded from
ftp://ftp.jclark.com/pub/xml/expat.zip.
The directory xmltok contains a low-level library for tokenizing
XML. The interface is documented in xmltok/xmltok.h.
The directory xmlparse contains an XML parser library that is built on
top of the xmltok library. The interface is documented in
xmlparse/xmlparse.h. The directory sample contains a simple example
program using this interface. The directory sample/build.bat is a batch file to build
the example using Visual C++.
The directory xmlwf contains the xmlwf application, which uses the
xmlparse library. The arguments to xmlwf are one or more files to
check for well-formedness. An option -d dir can be
specified. For each well-formed input file, the corresponding canonical
XML is written to dir/f, where f is the filename (without any path)
of the input file. A -x option causes references to external general
entities to be processed. A -s option makes documents that are not
stand-alone cause an error (a document is considered stand-alone if
it is intrinsically stand-alone because it has no external subset and no
references to parameter entities in the internal subset or it is
declared as stand-alone in the XML declaration).
</p>
-Des:
##----------------------------------------
=Pkg: expect 5.44.1.11 1.241.1 src
=Sum: Outil pour automatiser les programmes interactifs
+Des:
<!-- DT:Rich -->
<p>Expect est un outil essentiel pour automatiser des applications interactives telles que telnet, ftp, passwd, fsck, rlogin, tip, etc. Expect rend cela très facile. Expect est aussi très utile pour tester ces applications. Son fonctionnement est décrit dans de nombreux articles et FAQs. OReilly a publié un livre dédié à son fonctionnement.
</p>
-Des:
##----------------------------------------
=Pkg: fam 2.7.0 130.21 src
=Sum: File Alteration Monitoring Daemon
+Des:
<!-- DT:Rich -->
<p>Fam is a file alteration monitoring service. With it, you can receive signals when files are created or changed.
</p><p>
This package provides libfam, which is used by KDE and GNOME. It also provides a tool for the console called fileschanged.
</p><p>
To use fam notifications (it can reduce the network load on NFS servers, especially if they host user home directories) you need to run the fam daemon, which can be found in the fam-server package.
</p>
-Des:
##----------------------------------------
=Pkg: farsight2 0.0.16 1.1.169 src
=Sum: Framework for Audio/Video Conferencing Protocols
+Des:
<!-- DT:Rich -->
<p>The Farsight project is an effort to create a framework to deal with all known audio/video conferencing protocols. On one side it offers a generic API that makes it possible to write plugins for different streaming protocols, on the other side it offers an API for clients to use those plugins.
</p>
-Des:
##----------------------------------------
=Pkg: file 4.24 43.17 src
=Sum: A Tool to Determine File Types
+Del:
<!-- DT:Rich -->
<p>This package is required by lpdfilter.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>With the file command, you can obtain information on the file type of a specified
file. File type recognition is controlled by the file /etc/magic, which
contains the classification criteria. This command is used by apsfilter
to permit automatic printing of different file types.
</p>
-Des:
##----------------------------------------
=Pkg: flac 1.2.1 68.15 src
=Sum: Free Lossless Audio Codec
+Des:
<!-- DT:Rich -->
<p>FLAC is an open source lossless audio codec developed by Josh Coalson.
</p>
-Des:
##----------------------------------------
=Pkg: fltk 1.1.9 1.16 src
=Sum: Free C++ GUI Toolkit for the X Window System, OpenGL, and WIN32
+Des:
<!-- DT:Rich -->
<p>The Fast Light Tool Kit (&quot;FLTK&quot;, pronounced &quot;fulltick&quot;) is a C++ graphical
user interface toolkit for the X Window System (UNIX(r)), OpenGL(r), and Microsoft(r)
Windows(r) NT 4.0, 95, or 98.
The installation of this package requires you to install a 3D library.
If you do not have hardware 3D, you can use the software OpenGL library
in the mesasoft package (series x3d). The library can be recompiled without
3D support.
</p>
-Des:
##----------------------------------------
=Pkg: fontconfig 2.6.0 10.6 src
=Sum: Library for Font Configuration
+Des:
<!-- DT:Rich -->
<p>Fontconfig is a library for configuring and customizing font access. It contains two essential modules: the configuration module, which builds an internal configuration from XML files, and the matching module, which accepts font patterns and returns the nearest matching font.
</p>
-Des:
##----------------------------------------
=Pkg: freeglut 080721 21.9 src
=Sum: Freely licensed alternative to the GLUT library
+Des:
<!-- DT:Rich -->
<p>Freeglut is a completely open source alternative to the OpenGL Utility
Toolkit (GLUT) library. GLUT was originally written by Mark Kilgard to
support the sample programs in the second edition OpenGL
Redbook. Since then, GLUT has been used in a wide variety of
practical applications because it is simple, universally available, and
highly portable.
</p><p>
GLUT (and freeglut) allow the user to create and manage windows
containing OpenGL contexts and also read
the mouse, keyboard, and joystick functions on a wide range of platforms.
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-client 1.1.6 40.1 src
=Sum: FreeRADIUS Client Software
+Des:
<!-- DT:Rich -->
<p>A portable, easy-to-use and standard compliant library suitable for developing free and commercial software that need support for a RADIUS protocol (RFCs 2128 and 2139).
</p>
-Des:
##----------------------------------------
=Pkg: freeradius-server 2.1.1 7.7.19.77 src
=Sum: Very Highly Configurable Radius Server
+Des:
<!-- DT:Rich -->
<p>The FreeRADIUS server has a number of features found in other
servers and additional features not found in any other server.
The server&#39;s features are:
<ul>
<li>Support for RFC and VSA attributes
</li><li>Additional server configuration attributes
</li><li>Selection of a particular configuration
</li><li>Authentication methods
</li><li>Accounting methods
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: freetype2 2.3.7 25.10.1 src
=Sum: Une bibliothèque de polices TrueType
+Des:
<!-- DT:Rich -->
<p>This library features TrueType fonts for open source
projects. This version also contains an autohinter for producing
improved output.
</p>
-Des:
##----------------------------------------
=Pkg: fribidi 0.10.9 57.22 src
=Sum: Free Implementation of BiDi Algorithm
+Des:
<!-- DT:Rich -->
<p>This library implements the algorithm as described in the &quot;Unicode
Standard Annex #9, the Bidirectional Algorithm,
http://www.unicode.org/unicode/reports/tr9/&quot;. FriBidi is exhaustively tested against the Bidi Reference Code and, to the best of the developers&#39; knowledge, does notcontain any conformance bugs.
</p><p>
The API was inspired by the document &quot;Bi-Di languages support -
BiDi API proposal&quot; by Franck Portaneri, which he wrote as a proposal for
adding BiDi support to Mozilla.
</p>
-Des:
##----------------------------------------
=Pkg: fuse 2.7.2 61.18.1 src
=Sum: Système de fichiers en espace utilisateur
+Des:
<!-- DT:Rich -->
<p>With FUSE, a user space program can export a file system through the <a href="pkg://kernel-default"> Linux kernel</a>.
</p><p>
User space file systems which are implemented using FUSE are provided by the following packages:
<ul>
<li><a href="pkg://curlftpfs">curlftpfs</a> (mount FTP servers),
</li><li><a href="pkg://encfs">encfs</a> (layered file encryption),
</li><li><a href="pkg://fuseiso">fuseiso</a> (mount iso, img, bin, mdf and nrg CD-ROM images),
</li><li><a href="pkg://fusepod">fusepod</a> (mount iPods),
</li><li><a href="pkg://fusesmb">fusesmb</a> (mount a fully browseable network neighborhood),
</li><li><a href="pkg://gphotofs">gphotofs</a> (mount gphoto-supported cameras),
</li><li><a href="pkg://ntfs-3g">ntfs-3g</a> (mount NTFS volumes read-write),
</li><li><a href="pkg://obexfs">obexfs</a> (mount of bluetooth devices),
</li><li><a href="pkg://sshfs">sshfs</a> (mount over ssh),
</li><li><a href="pkg://wdfs">wdfs</a> (mount of WebDAV shares)
</li></ul>
This package contains the mount binaries for fuse (might not be needed by some FUSE filesystems like <a href="pkg://ntfs-3g">ntfs-3g</a>) and the documentation for FUSE.
</p><p>
After installing <a href="pkg://fuse-devel">fuse-devel</a>, administrators can compile and install other user space file systems which can be found at <tt>http://fuse.sourceforge.net/wiki</tt>
</p>
-Des:
##----------------------------------------
=Pkg: fwnn 1.1.1a017 672.16 src
=Sum: FreeWnn Japanese Input System--Server Only
+Des:
<!-- DT:Rich -->
<p>FreeWnn is a Kana-Kanji translation system, originally developed by a
joint project made up of Kyoto University, OMRON Corporation [formerly
known as Tateishi Electronics Co.], and ASTEC Inc. Further
development and maintenance is now done by the &quot;FreeWnn Project&quot;
(http://www.freewnn.org).
</p><p>
</p><p>
The name &quot;Wnn&quot;, is an acronym for the Japanese sentence &quot;Watashino
Namaeha Nakanodesu&quot; (literally, it means &quot;my name is Nakano.&quot;), and is
derived from a goal of the project: to develop a system powerful
enough to translate a whole sentence like that at once.  The source
code has been written in C and is freely distributed. Consequently,
Wnn spread widely among workstation platforms, and became a de facto
standard as a Kana-Kanji translation system for UNIX operating
systems.
</p><p>
</p><p>
Wnn works in a client/server manner. The server portion of Wnn, or
jserver, is used as a Kana-Kanji translation engine for clients like
&quot;xwnmo&quot; and &quot;kinput2&quot; (input systems for the X Window System) or for
clients like &quot;Egg&quot;, which are part of Mule (MUlti-Lingual Emacs) and
XEmacs.
</p><p>
</p><p>
This package contains only the Japanese server.
</p>
-Des:
##----------------------------------------
=Pkg: gcc 4.3 62.198 src
=Sum: Le compilateur GNU pour le langage C
+Des:
<!-- DT:Rich -->
<p>Le compilateur GNU pour le langage C.
</p>
-Des:
##----------------------------------------
=Pkg: gcc43 4.3.4_20091019 0.7.35 src
=Sum: The GNU C Compiler and Support Files
+Des:
<!-- DT:Rich -->
<p>Core package for the GNU Compiler Collection, including the C language
frontend.
</p><p>
Language frontends other than C are split to different sub-packages,
namely gcc-ada, gcc-c++, gcc-fortran, gcc-java, gcc-objc and gcc-obj-c++.
</p>
-Des:
##----------------------------------------
=Pkg: gconf2 2.28.0 1.6.10 src
=Sum: Le configurateur GNOME 2.X de la base de donnée système
+Des:
<!-- DT:Rich -->
<p>Gconf, l&#39;outil de configuration de la base de donnés GNOME. Il est utilisé par la plate forme de bureau GNOME 2.0. 
</p>
-Des:
##----------------------------------------
=Pkg: gd 2.0.36.RC1 52.18 src
=Sum: Une bibliothèque de dessin pour les programmes qui utilisent les PNG et les JPEG en sortie.
+Des:
<!-- DT:Rich -->
<p>Gd allows your code to quickly draw images complete with lines, arcs,
text, and multiple colors. It supports cut and paste from other images and
flood fills. It outputs PNG, JPEG, and WBMP (for wireless devices) and is
supported by PHP4.
</p>
-Des:
##----------------------------------------
=Pkg: gdb 7.0 0.4.16 src
=Sum: Le débogueur GNU
+Des:
<!-- DT:Rich -->
<p>Vous pouvez utiliser ce débogueur pour des programmes qui ont été écrits
en C, C++ et Modula-2. Un support pour Fortran 77 de GNU est maintenant
inclus, du moins en partie.
</p>
-Des:
##----------------------------------------
=Pkg: gdbm 1.8.3 371.83 src
=Sum: Routines de bases de donnés GNU
+Des:
<!-- DT:Rich -->
<p>Il s&#39;agit de bibliothèques statiques et dynamiques de bases de données GNU.
</p>
-Des:
##----------------------------------------
=Pkg: gegl 0.0.20 1.35 src
=Sum: Generic Graphics Library
+Des:
<!-- DT:Rich -->
<p>GEGL provides infratructure to do demand based cached non destructive image editing on larger than RAM buffers. Through babl it provides support for a wide range of color models and pixel storage formats for input and output.
</p>
-Des:
##----------------------------------------
=Pkg: geoclue 0.11.1 1.6.130 src
=Sum: Modular Geoinformation Service
+Des:
<!-- DT:Rich -->
<p>Geoclue is a modular geoinformation service built on top of the D-Bus
messaging system. The goal of the Geoclue project is to make creating
location-aware applications as simple as possible.
</p>
-Des:
##----------------------------------------
=Pkg: geronimo-specs 1.1 104.30 src
=Sum: Geronimo J2EE server J2EE specifications
+Des:
<!-- DT:Rich -->
<p>Geronimo is Apache&#39;s ASF-licenced J2EE server project.
These are the J2EE-Specifications
Note: You should use the subpackages for the Specifications
that you actually need.  The ones installed by the main package
are deprecated and will disapear in future releases.
</p>
-Des:
##----------------------------------------
=Pkg: gfxboot 4.1.24 1.2.18 src
=Sum: Graphical Boot Logo for GRUB, LILO and SYSLINUX
+Des:
<!-- DT:Rich -->
<p>Tools to configure your bootloader graphics.
</p>
-Des:
##----------------------------------------
=Pkg: ghostscript-library 8.62 32.27.31 src
=Sum: Fichiers nécessaires au démarrage de gs (GhostScript)
+Des:
<!-- DT:Rich -->
<p>Hormis les polices, ce paquet contient tous les fichiers pour le
démarrage de gs (GhostScript).
</p><p>
Pour quelques pilotes d&#39;imprimantes, vous trouverez une description détaillée
sous:
</p><p>
/usr/share/ghostscript/7.05/doc/
</p><p>
Jetez un coup d&#39;oeil sur les fichiers use.txt, devices.txt et,
pour le pilote expérimental cdj670, cdj850, cdj890 et cdj1600, sur readme.hp8.
</p>
-Des:
##----------------------------------------
=Pkg: giflib 4.1.6 11.10 src
=Sum: Une bibliothèque pour travailler avec les images GIF
+Des:
<!-- DT:Rich -->
<p>This Library allows manipulatng GIF Image files.
Since the LZW patents have expired, giflib can be used instead of libungif again.
</p>
-Des:
##----------------------------------------
=Pkg: glade3 3.5.2 8.17 src
=Sum: User Interface Builder for GTK+ and Gnome
+Des:
<!-- DT:Rich -->
<p>Glade is a RAD tool to enable quick &amp; easy development of user interfaces for the Gtk+ toolkit and the GNOME desktop environment.
The user interfaces designed in Glade are stored in XML format, enabling easy integration with external tools.
In particular libglade can load the XML files and create the interfaces at runtime. The DTD for the XML files is included with libglade, and is also at http://glade.gnome.org/glade-2.0.dtd.
Other tools are available which can turn the XML files into source code in languages such as C++, Perl and Python.
</p>
-Des:
##----------------------------------------
=Pkg: glib2 2.22.5 0.2.23 src
=Sum: Une bibliothèque pratique avec des fonctions écrites en C
+Des:
<!-- DT:Rich -->
<p>Cette bibliothèque fournie des fonctions pratiques, comme le listing et
le hachage, pour un programmeur en C et est utilisé par GTK+ et GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: glib2-branding-openSUSE 2.16 47.3 src
=Sum: Definition of GNOME Default Applications
+Des:
<!-- DT:Rich -->
<p>This branding-style package sets default applications in GNOME in openSUSE.
</p>
-Des:
##----------------------------------------
=Pkg: glibmm2 2.22.1 1.1.56 src
=Sum: Interface C++ pour la bibliothèque GLib2 (API)
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. glibmm24 wraps GLib 2.
Highlights include typesafe callbacks, widgets extensible via inheritance,
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: gltt 2.5.2 704.28 src
=Sum: Bibliothèque pour TrueType sous OpenGL
+Des:
<!-- DT:Rich -->
<p>Gltt est une bibliothèque qui permet la lecture et l&#39;utilisation de polices
TrueType dans les applications OpenGL
</p><p>
Les polices bitmap et antialiased ainsi que les tracés vectoriels
et en mode polygone sont supportés.
</p>
-Des:
##----------------------------------------
=Pkg: gmime 2.2.23 1.41.1 src
=Sum: Outils MIME bibliothèques
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multipurpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmime-2_4 2.4.8 1.2.55 src
=Sum: Outils MIME bibliothèques
+Des:
<!-- DT:Rich -->
<p>GMime is a set of utilities for parsing and creating messages using
the Multipurpose Internet Mail Extension (MIME).
</p>
-Des:
##----------------------------------------
=Pkg: gmp 4.2.3 10.99 src
=Sum: Bibliothèque GNU MP
+Des:
<!-- DT:Rich -->
<p>Bibliothèque permettant des opérations avec des nombres très longs (entiers ou avec virgule flottante).
</p>
-Des:
##----------------------------------------
=Pkg: gnokii 0.6.27 1.1.251 src
=Sum: Nokia Connectivity Program
+Des:
<!-- DT:Rich -->
<p>gnokii is a package of programs for communicating with a Nokia cellular phone
in Linux. Read the READMEs in /usr/share/doc/packages/gnokii
to find out which models are supported.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-certauth 0.3 3.21 src
=Sum: Authentification facile par certificat sous GNOME
+Des:
<!-- DT:Rich -->
<p>Gnome Certificate Authentication provides a mechanism for Evolution to authenticate over SSL using certificates.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-control-center 2.28.1 0.6.4 src
=Sum: The GNOME Control Center
+Des:
<!-- DT:Rich -->
<p>This package contains the control center for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop 2.28.2 0.3.22 src
=Sum: La bibliothèque d'API du bureau GNOME
+Des:
<!-- DT:Rich -->
<p>Ce paquet fournit la bibliothèque libgnome-desktop qui contient les API qui devraient appartenir à libgnome/libgnomeui mais qui n&#39;ont pas subi suffisamment de tests pour être considérées comme stable. Utilisez les à vos propres risques. Ce paquet contient aussi les documents installés comme partie de la distribution GNOME de base : la licence GPL, les fichiers du bureau GNOME, le programme gnome-about, certaines pages man, des icônes et autres images GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-desktop-sharp2 2.26.0 2.2.7 src
=Sum: Mono bindings for libgnome-desktop
+Des:
<!-- DT:Rich -->
<p>Mono bindings for libgnome-desktop
</p>
-Des:
##----------------------------------------
=Pkg: gnome-doc-utils 0.18.1 1.2.4 src
=Sum: Une coillection d'utilitaires de documentation pour GNOME
+Des:
<!-- DT:Rich -->
<p>Le paquet gnome-doc-utils package est un ensemble de documentations utilities for the GNOMEproject. Notably, it contains utilities for building documentation and all auxiliary files in your source tree. It also contains the DocBook
XSLT stylesheets that were once distributed with Yelp. Starting with
GNOME 2.8, Yelp requires gnome-doc-utils for XSLT.
It also contains the Python program <tt>xml2po</tt> that extracts translatable content
from XML documents and outputs gettext-compatible POT
files.
For simple tags, it works out-of-the-box. For complicated
tags, provide a list of all tags that are considered &quot;final&quot;
(tags with contents that should be put into one &quot;message&quot; in
the POT file), &quot;ignored&quot; (skipped over), and &quot;space preserving&quot;.
</p><p>
Sane defaults are available for DocBook documents and other
common document types (like GNOME Summaries and XHTML). For other kinds
of documents, it is possible to use -a (--automatic-tags) to choose
suitable translatable pieces.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-keyring 2.28.2 1.1.166 src
=Sum: Gestionnaire de trousseaux de mot de passe GNOME
+Des:
<!-- DT:Rich -->
<p>Le gestionnaire de trousseaux GNOME est un programme qui conserve vos mots de passe et d&#39;autres secrets des usagers.
Il s&#39;exécute comme un démon dans la session, comme au ssh-agent, et d&#39;autres applications peuvent le localiser par une variable d&#39;envionnement.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-mag 0.16.0 2.2.38 src
=Sum: Loupe d'écran pour le bureau GNOME
+Des:
<!-- DT:Rich -->
<p>gnome-mag provides a command line interface for stand-alone use,
although its primary goal is to provide a set of magnification
services for use by other client applications and assistive
technologies.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-media 2.28.5 1.2.97 src
=Sum: GNOME Multimedia (Media)
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient des programmes multimedia pour GNOME.
</p><p>
Documentation.
</p><p>
Aide en ligne de GNOME/usr/share/doc/packages/gnome
</p>
-Des:
##----------------------------------------
=Pkg: gnome-menus 2.28.0.1 1.1.213 src
=Sum: Menu de bureau GNOME
+Des:
<!-- DT:Rich -->
<p>This package is free software and is part of the GNOME project.
</p><p>
The package contains an implementation of the draft &quot;Desktop Menu Specification&quot; from freedesktop.org:
</p><p>
http://www.freedesktop.org/Standards/menu-spec
</p><p>
Also contained here are the GNOME menu layout configuration files, .directory files, and assorted menu-related utility programs.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-panel 2.28.0 2.4.49 src
=Sum: Le tableau de bord du bureau GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x Desktop Panel. The panel is an easy-to-use and functional interface to manage your desktop, start programs, and organize access to your data.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-settings-daemon 2.28.2 0.3.11 src
=Sum: Settings daemon for the GNOME desktop
+Des:
<!-- DT:Rich -->
<p>gnome-settings-daemon provides a daemon run by all GNOME sessions to provide live access to configuration settings and the changes done to them as well as basic services like a clipboard manager, controlling the startup of the screensaver, etc.
</p><p>
This module was previously part of GNOME Control Center, but has been splitted from it for a more general use.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-speech 0.4.25 1.1.214 src
=Sum: GNOME Speech API
+Des:
<!-- DT:Rich -->
<p>The GNOME Speech 1.0 API is currently under development. It will
provide API for both text-to-speech output and speech input.
It will be heavily influenced by the Java Speech API, both the
existing 1.0 specification and the new 2.0 one, which is currently
under development.
</p><p>
This package of GNOME Speech provides a driver for the Festival Speech Synthesizer.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-utils 2.28.3 0.2.85 src
=Sum: Utilitaires de base pour le bureau GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient certains utilitaires essentiels au bureau GNOME 2.x,
comme l&#39;outil de recherche et l&#39;outil résumant l&#39;information sur le système.
</p>
-Des:
##----------------------------------------
=Pkg: gnome-vfs2 2.24.2 2.1.172 src
=Sum: Bibliothèques du système de fichiers virtuel de GNOME 2.x
+Des:
<!-- DT:Rich -->
<p>GNOME VFS est le système de fichiers virtuel de GNOME. C&#39;est la base du gestionnaire de fichiers Nautilus. Il fournit une architecture modulaire et est fourni avec plusieurs modules pour le support des systèmes de fichiers, HTTP, FTP et autres.
Il fournit une API basée sur des URI, un sous-système pour la gestion des opérations asynchrones sur les fichiers, une bibliothèque pour la manipulation des types MIME et d&#39;autres fonctions.
</p>
-Des:
##----------------------------------------
=Pkg: gnutls 2.4.1 24.19.1 src
=Sum: La bibliothèque GNU de sécurité au niveau de la couche transport
+Des:
<!-- DT:Rich -->
<p>The GnuTLS project aims to develop a library that provides a secure layer
over a reliable transport layer. Currently the GnuTLS library implements the
proposed standards of the IETF&#39;s TLS working group.
</p>
-Des:
##----------------------------------------
=Pkg: gpgme 1.1.6 25.30 src
=Sum: Bibliothèque pour fournir aux applications un accès facile à GnuPG
+Des:
<!-- DT:Rich -->
<p>GnuPG Made Easy (GPGME) is a library designed to make access to GnuPG easier for applications.
It provides a high-level Crypto API for encryption, decryption, signing, signature
verification, and key management. Currently it uses GnuPG as its back-end, but the API is not
restricted to this engine.
</p><p>
Because the direct use of GnuPG from an application can be a complicated programming task,
it is suggested that all software should try to use GPGME instead. This way bug fixes or
improvements can be done at a central place and every application benefits from this.
Authors of MUAs should especially consider using GPGME. Creating a set of standard
widgets for common key selection tasks is even planned.
</p>
-Des:
##----------------------------------------
=Pkg: graphviz 2.20.2 6.19 src
=Sum: Graph Visualization Tools
+Des:
<!-- DT:Rich -->
<p>A collection of tools and tcl packages for the manipulation and layout
of graphs (as in nodes and edges, not as in bar charts).
</p>
-Des:
##----------------------------------------
=Pkg: graphviz-plugins 2.20.2 6.33 src
=Sum: Graph Visualization Tools
+Des:
<!-- DT:Rich -->
<p>A collection of tools and tcl packages for the manipulation and layout
of graphs (as in nodes and edges, not as in bar charts).
</p>
-Des:
##----------------------------------------
=Pkg: gssdp 0.7.0 1.1.202 src
=Sum: Library for resource discovery and announcement over SSDP
+Des:
<!-- DT:Rich -->
<p>gssdp offers a GObject-based API for handling resource discovery and
announcement over SSDP.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10 0.10.25 3.1.46 src
=Sum: Streaming-Media Framework Runtime
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming-media framework, based on graphs of filters which
operate on media data. Applications using this library can do anything
from real-time sound processing to playing videos, and just about anything
else media-related.  Its plug-in-based architecture means that new data
types or processing capabilities can be added by installing new
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gstreamer-0_10-plugins-base 0.10.25 1.1.133 src
=Sum: GStreamer Streaming-Media Framework Plug-Ins
+Des:
<!-- DT:Rich -->
<p>GStreamer is a streaming media framework based on graphs of filters that operate on media data. Applications using this library can do anything media-related, from real-time sound processing to playing videos. Its plug-in-based architecture means that new data
types or processing capabilities can be added simply by installing new plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-sharp2 2.12.9 22.4.23 src
=Sum: Connecteurs .Net pour GTK+
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les connecteursMono pour gtk+, gdk, atk, et pango.
</p>
-Des:
##----------------------------------------
=Pkg: gtk-vnc 0.3.9 1.1.215 src
=Sum: Un widget GTK pour les clients VNC
+Des:
<!-- DT:Rich -->
<p>gtk-vnc is a VNC viewer widget for GTK+. It is built using coroutines
allowing it to be completely asynchronous while remaining single threaded.
</p>
-Des:
##----------------------------------------
=Pkg: gtk1-compat 0.10 2.26 src
=Sum: Compatibility Wrappers for Old Versions of GLib, GTK+, GDK-Pixbuf, and libglade
+Des:
<!-- DT:Rich -->
<p>Wrapper headers, M4 macros, configuration scripts, and library symlinks, which simulate the presence of GLib1, GTK+1, GDK-Pixbuf1, and libglade1 development packages, but use GLib2, GTK+2, and libglade2.
Using it, you can force to link some older applications with new libraries without any effort.
</p><p>
The package also provides the gtk1-compat-autofix script, which does some source code modifications that cannot be worked around any other way, and a static library with some obsolete functions.
</p>
-Des:
##----------------------------------------
=Pkg: gtk2 2.18.9 0.4.1 src
=Sum: Library for Creation of Graphical User Interfaces (version 2)
+Des:
<!-- DT:Rich -->
<p>This fast and versatile library is used all over the world for all
<a href="pkg://libgnome"> GNOME</a> applications,
<a href="pkg://gimp"> The GIMP</a>, and several others. Originally, version 1 was
written for the GIMP and hence has the name GIMP ToolKit. Many people
like it because it is small, efficient, and very configurable.
</p><p>
Most applications which used <a href="pkg://gtk"> GTK1</a> have since switched to GTK2.
Besides a more flexible API, it provides improved text rendering using <a href="pkg://pango"> Pango</a> and many other goodies, but GTK+ 2 lacks compatibility with GTK1, so to switch, programmers have to port applications to it.
</p><p>
To develop applications with gtk, you need the package <a href="pkg://gtk2-devel">gtk2-devel</a>.
</p>
-Des:
##----------------------------------------
=Pkg: gtkglext 1.2.0 139.25 src
=Sum: Extension OpenGL pour GTK
+Des:
<!-- DT:Rich -->
<p>GtkGLExt is an OpenGL extension to GTK. It provides the GDK objects that support OpenGL rendering in GTK and GtkWidget API add-ons, to make GTK+ widgets OpenGL-capable.
</p>
-Des:
##----------------------------------------
=Pkg: gtkhtml2 3.28.2 0.6.8 src
=Sum: Bibliothèque pour le support de HTML dans Gtk2
+Des:
<!-- DT:Rich -->
<p>GtkHTML is a lightweight HTML rendering, printing, and editing engine.
It was originally based on KHTMLW, but is now being independently developed.
</p>
-Des:
##----------------------------------------
=Pkg: gtkmm2 2.18.2 1.1.279 src
=Sum: Interface C++ pour GTK2
+Des:
<!-- DT:Rich -->
<p>Gtkmm provides a C++ interface to the GTK+ GUI library. gtkmm2 wraps GTK+ 2.
Highlights include typesafe callbacks, widgets extensible via inheritance,
and a comprehensive set of widget classes that can be freely combined to
quickly create complex user interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview 2.8.2 0.1.195 src
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends the standard GTK+ 2.x
text widget, GtkTextView.
</p><p>
GtkSourceView improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtksourceview18 1.8.5 29.26 src
=Sum: GTK+ 2.0 Source Editing Widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends the standard GTK+ 2.x
text widget, GtkTextView.
</p><p>
GtkSourceView improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p>
-Des:
##----------------------------------------
=Pkg: gtkspell 2.0.14 17.32 src
=Sum: Bibliothèque pour l'interface du correcteur orthographique de GTK2
+Des:
<!-- DT:Rich -->
<p>GtkSpell provides MSWord-style and MacOSX-style highlighting of misspelled words
in a GtkTextView widget. Right-clicking a misspelled word opens a
menu of suggested replacements.
</p>
-Des:
##----------------------------------------
=Pkg: gucharmap 2.28.2 0.1.152 src
=Sum: A Feature-Rich Unicode Character Map
+Des:
<!-- DT:Rich -->
<p>Gucharmap est un puissant visionneur pour les polices et les tables de caractères Unicode.
</p>
-Des:
##----------------------------------------
=Pkg: guile 1.8.5 22.16 src
=Sum: GNU's Ubiquitous Intelligent Language for Extension
+Des:
<!-- DT:Rich -->
<p>This is Guile, a portable, embeddable Scheme implementation written in C.
Guile provides a machine independent execution platform that can be
linked in as a library when building extensible programs.
</p>
-Des:
##----------------------------------------
=Pkg: gupnp 0.13.0 1.1.193 src
=Sum: Implementation of the UPnP specification
+Des:
<!-- DT:Rich -->
<p>GUPnP implements the UPnP specification: resource announcement and
discovery, description, control, event notification, and presentation
(GUPnP includes basic web server functionality through libsoup). GUPnP
does not include helpers for construction or control of specific
standardized resources (e.g. MediaServer); this is left for higher level
libraries utilizing the GUPnP framework.
</p>
-Des:
##----------------------------------------
=Pkg: gupnp-igd 0.1.3 2.1.183 src
=Sum: Library to handle UPnP IGD port mapping
+Des:
<!-- DT:Rich -->
<p>gupnp-igd is a library to handle UPnP IGD port mapping. It is supposed
to have a very simple API.
</p>
-Des:
##----------------------------------------
=Pkg: gvfs 1.4.3 0.3.13 src
=Sum: Fonctionnalité VFS pour GLib
+Des:
<!-- DT:Rich -->
<p>Fonctionnalité VFS pour GLib.
</p>
-Des:
##----------------------------------------
=Pkg: gypsy 0.7 1.6.54 src
=Sum: GPS multiplexing daemon
+Des:
<!-- DT:Rich -->
<p>Gypsy is a GPS multiplexing daemon which allows multiple clients to
access GPS data from multiple GPS sources concurrently.
</p><p>
Without some sort of multiplexing system, a GPS device can only safely
be accessed by one client. In a server situation this may not cause any
problems, but on modern desktop which could potentially have multiple
location aware devices, this could be an issue.
</p>
-Des:
##----------------------------------------
=Pkg: hal 0.5.12 23.40.5 src
=Sum: Daemon for Collecting Hardware Information
+Des:
<!-- DT:Rich -->
<p>HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both, physical devices (such as PCI and USB) and the device classes (such as input, net, and block) physical devices have. Besides it allows merging of information from device info files specific to a device.
HAL provides a API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices.
For further information, please refer to the  HAL specification.
</p>
-Des:
##----------------------------------------
=Pkg: hippo-canvas 0.3.0 3.35 src
=Sum: Cairo/GObject/GTK+ based canvas
+Des:
<!-- DT:Rich -->
<p>Cairo/GObject/GTK+ based canvas
</p>
-Des:
##----------------------------------------
=Pkg: htdig 3.2.0b6 133.18 src
=Sum: WWW Index and Search System
+Des:
<!-- DT:Rich -->
<p>The ht://Dig system is a complete World Wide Web index and search
system for a small domain or intranet. This system is not meant to replace
the need for powerful Internet-wide search systems like Lycos, Infoseek,
Webcrawler, or AltaVista. Instead it is meant to cover the search needs
of a single company, campus, or even a particular subsection of a Web
site.
</p><p>
</p><p>
Unlike some WAIS-based or Web server-based search engines, ht://Dig
can span several Web servers at a site. The type of these
Web servers does not matter as long as they understand the HTTP 1.0 protocol.
</p>
-Des:
##----------------------------------------
=Pkg: hunspell 1.2.7 1.16 src
=Sum: Hunspell - a spell checker and morphological analyzer library
+Des:
<!-- DT:Rich -->
<p>Hunspell is a spell checker and morphological analyzer library and
program designed for languages with rich morphology and complex word
compounding or character encoding. Hunspell interfaces: Ispell-like
terminal interface using Curses library, Ispell pipe interface,
OpenOffice.org UNO module.
</p>
-Des:
##----------------------------------------
=Pkg: hwinfo 15.33 0.2.19 src
=Sum: Hardware Library
+Des:
<!-- DT:Rich -->
<p>A simple program that lists results from the hardware detection library.
</p>
-Des:
##----------------------------------------
=Pkg: i4l-base 2008.12.10 1.26 src
=Sum: ISDN for Linux Basic Utilities
+Des:
<!-- DT:Rich -->
<p>These utilities are needed for configuring and using ISDN devices.
This package includes special tools for network connections via ISDN.
Other tools for setup of various ISDN cards and for monitoring ISDN connections are also included.
</p>
-Des:
##----------------------------------------
=Pkg: iproute2 2.6.29.1 6.1.82 src
=Sum: Advanced Routing
+Des:
<!-- DT:Rich -->
<p>This package provides the tools ip, tc, and rtmon needed to use the new and
advanced routing options of the Linux kernel. The SUSE Linux distribution has used this package for network setup since SuSE Linux 8.0.
</p>
-Des:
##----------------------------------------
=Pkg: iptables 1.4.6 2.2.24 src
=Sum: IP Packet Filter Administration
+Des:
<!-- DT:Rich -->
<p>Iptables is used to set up, maintain, and inspect the
tables of IP packet filter rules in the Linux kernel.
This version requires kernel 2.4.0 or newer.
</p>
-Des:
##----------------------------------------
=Pkg: iso-codes 3.3 1.20 src
=Sum: ISO Code Lists and Translations
+Des:
<!-- DT:Rich -->
<p>This package provides the ISO-639 language code list, the ISO-3166
territory code list, ISO-3166-2 subterritory lists, and all their
translations in gettext .po form.
</p>
-Des:
##----------------------------------------
=Pkg: jasper 1.900.1 134.9 src
=Sum: An Implementation of the JPEG-2000 Standard, Part 1
+Des:
<!-- DT:Rich -->
<p>This package contains an implementation of the image compression
standard, JPEG-2000, Part 1. It consists of tools for conversion to and
from the JP2 and JPC formats.
</p>
-Des:
##----------------------------------------
=Pkg: jpeg 6b 879.10 src
=Sum: Independent JPEG Group's JPEG Software
+Des:
<!-- DT:Rich -->
<p>Software to implement JPEG image compression and decompression. JPEG
(pronounced &quot;jay-peg&quot;) is a standardized compression method for
full-color and grayscale images.  JPEG is intended for compressing
&quot;real-world&quot; scenes (most of the time these are pictures that have
been scanned-in with a scanner or taken with a digital camera).
Cartoons and other nonrealistic images
are not its strong suit. It should be noted that JPEG output is not
necessarily the same as its input. If this is a factor for you,
do not use it. With typical real-world scenes, JPEG can achieve
high compression rates without noticeable differences. If
you can accept pictures of lower quality, JPEG can achieve amazingly
high compression rates.
</p><p>
There are some library functions available for reading and writing
JPEG files. The &#39;cjpeg&#39; and &#39;djpeg&#39; applications use the library to
make conversions between JPEG and other popular graphic file formats
possible. The JPEG library is meant to be used within other applications.
</p><p>
Cjpeg compresses the input file, or standard input if no filename
is given, and produces a JPEG/JFIF file as standard output. Currently
supported input file formats include: PPM (PBMPLUS color format),
PGM (PBMPLUS Grayscale format), BMP, GIF, Targa, and RLE (Utah Raster
Toolkit Format) (RLE is only supported if the RLE library is
available). Djpeg decompresses a JPEG file into one of the above
mentioned formats.
</p>
-Des:
##----------------------------------------
=Pkg: json-glib 0.6.2 3.1.55 src
=Sum: Library for JavaScript Object Notation format
+Des:
<!-- DT:Rich -->
<p>JSON is a lightweight data-interchange format.It is easy for humans to
read and write. It is easy for machines to parse and generate.
</p><p>
JSON-GLib provides a parser and a generator GObject classes and various
wrappers for the complex data types employed by JSON, such as arrays
and objects.
</p><p>
JSON-GLib uses GLib native data types and the generic value container
GValue for ease of development. It also provides integration with the
GObject classes for direct serialization into, and deserialization from,
JSON data streams.
</p>
-Des:
##----------------------------------------
=Pkg: k3b 1.0.5 48.32.32 src
=Sum: A Universal CD and DVD Burning Application
+Des:
<!-- DT:Rich -->
<p>K3b is a CD burning application that supports Ogg Vorbis, MP3 audio files, DVD burning, CDDB, and much more.
</p>
-Des:
##----------------------------------------
=Pkg: kde4-l10n 4.3.5 0.2.58 src
=Sum: Support de la langue anglaise pour KDE
+Des:
<!-- DT:Rich -->
<p>Paquetage nécessaire pour un bureau KDE anglais. Contient des traductions pour les programmes, des textes d&#39;aide et des captures d&#39;écran.
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4 4.3.5 0.1.74 src
=Sum: Les applications de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les applications de base pour un environnement de travail K Desktop
</p>
-Des:
##----------------------------------------
=Pkg: kdebase4-workspace 4.3.5 0.8.35 src
=Sum: Composants de l'environnement de travail KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base pour un environnement de travail K Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: kdeedu4-noarch 4.3.5 0.2.26 src
=Sum: Données pour les applications éducatives de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les données nécessaires à la bibliothèque &quot;éducative&quot; de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdegames4-carddecks 4.3.5 0.1.60 src
=Sum: Jeux de cartes par défaut pour les jeux KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les collections de jeux de cartes par défaut pour les jeux KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs3 3.5.10 23.27.1 src
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient kdelibs, l&#39;un des paquets de base de l&#39;environnement
K Desktop. Il inclut les bibliothèques de base du bureau KDE.
</p><p>
Ce paquet est absolument indispensable au fonctionnement du système KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4 4.3.5 0.2.46 src
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base de l&#39;environnement K Desktop. Il contient les bibliothèques nécessaires pour le bureau KDE.
</p><p>
Ce paquet est absolument indispensable pour utiliser les applications graphiques KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdelibs4-experimental 4.3.5 0.1.64 src
=Sum: Bibliothèques de base KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets de base de l&#39;environnement K Desktop. Il contient les bibliothèques nécessaires pour le bureau KDE.
</p><p>
Ce paquet est absolument indispensable pour utiliser les applications graphiques KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia3 3.5.10 1.34 src
=Sum: Bibliothèques multimédia de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les bibliothèques de base pour les programmes multimédia KDE.
Il contient également les greffons kfile pour Konqueror (pour afficher des informations supplémentaires sur les fichiers multimédia).
</p>
-Des:
##----------------------------------------
=Pkg: kdemultimedia4 4.3.5 0.2.28 src
=Sum: paquet de base pour kdemultimedia
+Des:
<!-- DT:Rich -->
<p>Ce paquet suggère les paquets qui sont construits depuis le module kdemultimedia.
</p>
-Des:
##----------------------------------------
=Pkg: kdenetwork4 4.3.5 0.1.74 src
=Sum: Paquetage KDE de base pour les réseaux
+Des:
<!-- DT:Rich -->
<p>Ce paquet suggère les paquets qui sont construits depuis le module kdenetwork.
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4 4.3.5 0.1.67 src
=Sum: Paquetage de base de kdepim
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les fichiers essentiels au module kdepim
</p>
-Des:
##----------------------------------------
=Pkg: kdepim4-runtime 4.3.5 0.1.73 src
=Sum: KDE Resources for PIM Storage Service
+Des:
<!-- DT:Rich -->
<p>This package contains the KDE resources for Akonadi, the KDE PIM storage service.
</p>
-Des:
##----------------------------------------
=Pkg: kdepimlibs4 4.3.5 0.1.68 src
=Sum: Bibliothèques du gestionnaire de données personnelles de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les paquets essentiels pour les applications de gestion de données personnelles de KDE.
</p>
-Des:
##----------------------------------------
=Pkg: kdesdk3 3.5.10 1.33 src
=Sum: Le kit de développement de logiciels de KDE.
+Des:
<!-- DT:Rich -->
<p>Collection d&#39;applications et d&#39;outils utilisés par les développeurs KDE.
Les applications importantes sont :
<ul>
<li>cervisia: pour parcourir les dépôts CVS
</li><li>kompare: voir les différences entre deux versions d&#39;un fichier
</li><li>umbrello: modélisation UML
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: kdesdk4 4.3.5 0.1.73 src
=Sum: Ce paquet contient le kit de développement de KDE
+Des:
<!-- DT:Rich -->
<p>Ce paquet suggère les paquets qui sont construits depuis le module kdesdk.
</p>
-Des:
##----------------------------------------
=Pkg: keyutils 1.2 107.22 src
=Sum: Linux Key Management Utilities
+Des:
<!-- DT:Rich -->
<p>Utilities to control the kernel key management facility and to provide a mechanism by which the kernel can call back to user space to get a key instantiated.
</p>
-Des:
##----------------------------------------
=Pkg: krb5 1.6.3 133.27.1 src
=Sum: MIT Kerberos5 Implementation--Libraries
+Des:
<!-- DT:Rich -->
<p>Kerberos V5 is a trusted-third-party network authentication system,
which can improve your network&#39;s security by eliminating the insecure
practice of clear text passwords.
</p>
-Des:
##----------------------------------------
=Pkg: ksh 93t 9.9.8 src
=Sum: Shell Korn
+Des:
<!-- DT:Rich -->
<p>The original Korn Shell.  The ksh is an sh-compatible command interpreter
that executes commands read from standard input or from a file.
</p>
-Des:
##----------------------------------------
=Pkg: lapack 3.1.1 64.21 src
=Sum: Linear Algebra Package
+Des:
<!-- DT:Rich -->
<p>LAPACK provides routines for solving systems of simultaneous linear equations, least-squares solutions of linear systems of equations, eigenvalue problems, and singular value problems. The associated matrix factorizations (LU, Cholesky, QR, SVD, Schur, generalized Schur) are also provided, as are related computations such as reordering of the Schur factorizations and estimating condition numbers. Dense and banded matrices are handled, but not general sparse matrices. In all areas, similar functionality is provided for real and complex matrices, in both single and double precision.
</p>
-Des:
##----------------------------------------
=Pkg: lcms 1.17 77.14.19 src
=Sum: Utilities for the Little CMS Engine
+Des:
<!-- DT:Rich -->
<p>Little cms is a small speed optimized color management engine.
</p>
-Des:
##----------------------------------------
=Pkg: ldapcpplib 0.1.2 3.1.42 src
=Sum: C++ API for LDAPv3
+Des:
<!-- DT:Rich -->
<p>C++ API for LDAPv3.
</p><p>
</p><p>
Documentation is in /usr/share/doc/packages/ldapcpplib/srcdoc.
</p>
-Des:
##----------------------------------------
=Pkg: ldtp 1.3.0 4.27 src
=Sum: Linux Desktop Testing Project (LDTP)
+Des:
<!-- DT:Rich -->
<p>GNU/Linux Desktop Testing Project (GNU/LDTP) is aimed at producing a high quality test automation framework and cutting-edge tools that can be used to test GNU/Linux Desktop and improve it. It uses the accessibility libraries to poke through the application&#39;s user interface. The framework has tools to generate Appmap by reading through the user interface components of an application. The framework also has tools to record test cases based on user selection on the application.
GNU/LDTP core framework uses Appmap and the recorded test cases to test an application and gives the status of each test case as output. GNU/LDTP can test any GNOME application that is enabled for accessibility, as Mozilla, Openoffice.org, any Java application (should have a UI based on swing), and KDE 4.0 applications based on QT 4.0 (based on the press releases by KDE).
</p><p>
You are encouraged to join the project and help to create a robust, reliable, and stable test framework and tools for Unix desktops.
</p>
-Des:
##----------------------------------------
=Pkg: lib3ds 1.3.0 2.8 src
=Sum: Import and Export of Autodesk 3DS Files
+Des:
<!-- DT:Rich -->
<p>Lib3ds is a free alternative to Autodesk&#39;s 3DS File Toolkit for handling
3DS files. Its main goal is to simplify the creation of 3DS import and
export filters.
</p>
-Des:
##----------------------------------------
=Pkg: libHX 1.23 3.14 src
=Sum: General-purpose Library
+Des:
<!-- DT:Rich -->
<p>A library for:
A library for:<ul>
<li>A+R/B trees to use for lists or maps (associative arrays)
</li><li>Deques (double-ended queues) (Stacks (LIFO) / Queues (FIFOs))
</li><li>platform independent opendir-style directory access
</li><li>platform independent dlopen-style shared library access
</li><li>auto-storage strings with direct access
</li><li>command line option (argv) parser
</li><li>shell-style config file parser
</li><li>platform independent random number generator with transparent
/dev/urandom support
</li><li>various string, memory and zvec ops
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libaio 0.3.109 0.1.46 src
=Sum: Linux-Native Asynchronous I/O Access Library
+Des:
<!-- DT:Rich -->
<p>The Linux-native asynchronous I/O facility (&quot;async I/O&quot;, or &quot;aio&quot;) has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
</p>
-Des:
##----------------------------------------
=Pkg: libao 0.8.8 81.27 src
=Sum: A Cross-Platform Audio Output Library
+Des:
<!-- DT:Rich -->
<p>Libao is a cross-platform audio output library.  It currently supports
ESD, OSS, Solaris, and IRIX.
</p>
-Des:
##----------------------------------------
=Pkg: libapparmor1 2.3 51.14 src
=Sum: Utility library for AppArmor
+Des:
<!-- DT:Rich -->
<p>This package provides the libapparmor library, which contains the change_hat(2)
symbol, used for sub-process confinement by AppArmor, as well as functions to parse AppArmor log messages.
</p>
-Des:
##----------------------------------------
=Pkg: libart_lgpl 2.3.20 46.16.43 src
=Sum: Libart Components Licensed under the LGPL
+Des:
<!-- DT:Rich -->
<p>Libart is a library for high-performance 2D graphics. It is currently being used as the antialiased rendering engine for GNOME Canvas. It is also the rendering engine for Gill, the GNOME Illustration application.
</p>
-Des:
##----------------------------------------
=Pkg: libassuan 1.0.5 1.14 src
=Sum: Libassuan is the IPC library used by GnuPG version 2
+Des:
<!-- DT:Rich -->
<p>Libassuan is the IPC library used by <a href="pkg://gpg2"> GnuPG version 2</a>
</p><p>
<a href="pkg://gpgme">gpgme</a> also uses libassuan to communicate with a libassuan-enabled
GnuPG v2 server, but it uses it&#39;s own copy of libassuan.
</p><p>
As of libassuan-1.0.1 and libassuan-1.0.2, there only exists static
libassuan, so <a href="pkg://libassuan-devel">libassuan-devel</a> is the package with the library.
</p>
-Des:
##----------------------------------------
=Pkg: libavc1394 0.5.3 131.15 src
=Sum: Libavc1394--Programming Interface to the AV/C Specification
+Des:
<!-- DT:Rich -->
<p>Libavc1394 is a programming interface to the AV/C specification from
the 1394 Trade Association. AV/C stands for Audio/Video Control.  Currently,
applications use the library to control the tape transport mechanism on DV
camcorders. However, there are many devices and device functions that
can be controlled via AV/C. Eventually, the library will be expanded to
implement more of the specification and to provide a high level interface
to various devices.
</p>
-Des:
##----------------------------------------
=Pkg: libbeagle 0.3.5.1 7.27 src
=Sum: Beagle C Interface
+Des:
<!-- DT:Rich -->
<p>Library to talk to the beagle server in C.
</p>
-Des:
##----------------------------------------
=Pkg: libbitmask 2.0 4.22 src
=Sum: Multi-word bitmask abstract data type (used by cpusets)
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that The
libbitmask package provides an abstract data type for arbitrary length
bit masks, with a variety of operators.  The cpuset package depends
on libbitmask.
</p>
-Des:
##----------------------------------------
=Pkg: libbonobo 2.24.2 2.1.63 src
=Sum: The Bonobo Component System for the GNOME 2.x Desktop Platform
+Des:
<!-- DT:Rich -->
<p>Bonobo is a component system for the GNOME platform. Libbonobo is the new version for the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: libbonoboui 2.24.2 1.1.201 src
=Sum: The Bonobo Part of the GNOME User Interface Libraries
+Des:
<!-- DT:Rich -->
<p>This library contains the Bonobo-related part of the GNOME UI libraries. It belongs to the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: libcaca 0.99.beta13b 47.30 src
=Sum: Library for Colour ASCII Art, text mode graphics
+Des:
<!-- DT:Rich -->
<p>libcaca is the Colour AsCii Art library. It provides high level functions
for colour text drawing, simple primitives for line, polygon and ellipse
drawing, as well as powerful image to text conversion routines.
</p>
-Des:
##----------------------------------------
=Pkg: libcanberra 0.18 2.1.225 src
=Sum: Portable sound event library
+Des:
<!-- DT:Rich -->
<p>libcanberra is an implementation of the XDG Sound Theme and Name Specifications, for generating event sounds on free desktops, such as GNOME. It comes with several backends (ALSA, PulseAudio, null) and is designed to be portable. It consists of the following parts:
<ol>
<li>libcanberra: the main library
</li><li>libcanberra-gtk: some glue code to make it easier to use libcanberra from Gtk+ applications
</li><li>libcanberra-gtk-module: a Gtk+ module that uses libcanberra-gtk to trigger input feedback event sounds
</li></ol></p>
-Des:
##----------------------------------------
=Pkg: libcap 2.11 2.15 src
=Sum: Library for Capabilities (linux-privs) Support
+Des:
<!-- DT:Rich -->
<p>Capabilities are a measure to limit the omnipotence of the superuser.
Currently a program started by root or setuid root has the power to
do anything.
Capabilities (Linux-Privs) provide a more fine-grained access control.
Without kernel patches, you can use this library to drop capabilities within
setuid binaries.
If you use patches, this can be done automatically by the kernel.
</p>
-Des:
##----------------------------------------
=Pkg: libcddb 1.3.0 67.15 src
=Sum: CDDB Access Library
+Des:
<!-- DT:Rich -->
<p>Libcddb is a library that implements the different protocols (CDDBP, HTTP, and SMTP) to access data on a CDDB server (http://freedb.org).
It tries to be as cross-platform as possible.
</p>
-Des:
##----------------------------------------
=Pkg: libcdio 0.80 6.11 src
=Sum: CD-ROM Access Library
+Des:
<!-- DT:Rich -->
<p>This library encapsulates CD-ROM reading and control.
Applications wanting to be oblivious to the OS and device-dependent properties of a CD-ROM can use this library.
</p>
-Des:
##----------------------------------------
=Pkg: libchamplain 0.4.0 1.2.84 src
=Sum: Library to display maps
+Des:
<!-- DT:Rich -->
<p>Libchamplain is a C library providing a ClutterActor to display maps. It
also provides a Gtk+ widget to display maps in Gtk+ applications.
</p><p>
It supports numerous free map sources such as OpenStreetMap,
OpenAerialMap and Maps for free.
</p>
-Des:
##----------------------------------------
=Pkg: libchewing 0.3.0 82.15 src
=Sum: Intelligent Phonetic Input Method Library for Traditional Chinese
+Des:
<!-- DT:Rich -->
<p>Intelligent phonetic input method library for traditional Chinese.
</p>
-Des:
##----------------------------------------
=Pkg: libcpuset 1.0 8.1.49 src
=Sum: cpuset processor and memory placement library
+Des:
<!-- DT:Rich -->
<p>The Cpuset System is a processor and memory placement mechanism that enables a
system administrator to confine tasks to running certain CPUs, and to
allocating memory on certain Memory Nodes.  The libcpuset library provides a
convenient &#39;C&#39; API to cpusets.
</p>
-Des:
##----------------------------------------
=Pkg: libdaemon 0.12 31.6 src
=Sum: Lightweight C library That Eases the Writing of UNIX Daemons
+Des:
<!-- DT:Rich -->
<p>libdaemon is a lightweight C library that eases the writing of UNIX daemons. It consists of the following parts:
<ul>
<li>A wrapper around fork() that does the correct daemonization procedure of a process
</li><li>A wrapper around syslog() for simpler log output compatible with syslog or STDERR
</li><li>An API for writing PID files
</li><li>An API for serializing UNIX signals into a pipe for usage with select() or poll()
</li><li>An API for running subprocesses with STDOUT and STDERR redirected to syslog
</li></ul>
APIs like these are used in most daemon software available. It is not that simple to get it done right and code duplication is not a goal.
</p>
-Des:
##----------------------------------------
=Pkg: libdb-4_5 4.5.20 95.39 src
=Sum: Berkeley DB Database Library Version 4.5
+Des:
<!-- DT:Rich -->
<p>The Berkeley DB Database is a programmatic toolkit that provides
database support for applications.
</p><p>
This package contains the necessary runtime libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libdbus-1-qt3-0 0.8.1 17.25 src
=Sum: Qt3 DBus Bindings
+Des:
<!-- DT:Rich -->
<p>This library provides Qt3-classes for accessing the DBus
</p>
-Des:
##----------------------------------------
=Pkg: libdc1394 2.0.2 10.15 src
=Sum: 1394-Based Digital Camera Control Library
+Des:
<!-- DT:Rich -->
<p>This library provides functionality for controlling any camera that conforms to the 1394-Based Digital Camera Specification. It utilizes the low-level functionality provided by libraw1394 to communicate with the camera.
</p>
-Des:
##----------------------------------------
=Pkg: libdiscid 0.2.1 1.22 src
=Sum: Library for creating MusicBrainz DiscIDs from audio CDs
+Des:
<!-- DT:Rich -->
<p>libdiscid is a C library for creating MusicBrainz DiscIDs from audio CDs. It reads a CD&#39;s table of contents (TOC) and generates an identifier which can be used to lookup the CD at MusicBrainz. Additionally, it provides a submission URL for adding the DiscID to the database.
</p><p>
The interface of this library is new, but the DiscID algorithm and the operating system dependent CD-ROM/DVD-ROM access code have been ported from libmusicbrainz version 2. For more info about the interface read the [WWW] API documentation.
</p>
-Des:
##----------------------------------------
=Pkg: libdmxview 0.1.0 4.17 src
=Sum: DMX viewing library
+Des:
<!-- DT:Rich -->
<p>Library for efficiently viewing and controlling remote desktop sessions.
</p>
-Des:
##----------------------------------------
=Pkg: libdnet 1.11 87.17 src
=Sum: Library for Simple, Portable Interface to Low Level Networking Routines
+Des:
<!-- DT:Rich -->
<p>libdnet provides a simplified, portable interface to several low-level networking routines, including:
<ul>
<li>network address manipulation
</li><li>kernel arp(4) cache and route(4) table lookup and manipulation
</li><li>network firewalling (IP filter, ipfw, ipchains, pf, PktFilter, ...)
</li><li>network interface lookup and manipulation
</li><li>IP tunnelling (BSD/Linux tun, Universal TUN/TAP device)
</li><li>raw IP packet and Ethernet frame transmission
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libdrm 2.4.17 0.3.12 src
=Sum: Userspace Interface for Kernel DRM Services
+Des:
<!-- DT:Rich -->
<p>The package containts the userspace interface to the kernel DRM services.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdnav 4.1.3 1.16 src
=Sum: A DVD Navigation Library
+Des:
<!-- DT:Rich -->
<p>This library contains functions to display DVD video menus.
</p>
-Des:
##----------------------------------------
=Pkg: libdvdread 4.1.3 1.22 src
=Sum: Library for Reading DVD Video Images
+Des:
<!-- DT:Rich -->
<p>This package contains shared libraries for accessing DVD images
(this package does not contain DeCSS algorithms).
</p>
-Des:
##----------------------------------------
=Pkg: libedit 2.11.snap20080712 1.22 src
=Sum: A command line editing and history library
+Des:
<!-- DT:Rich -->
<p>libedit is a command line editing and history library.  It is designed to be
used by interactive programs that allow the user to type commands at a terminal
prompt.
</p>
-Des:
##----------------------------------------
=Pkg: libelf0 0.8.12 1.1.52 src
=Sum: An ELF Object File Access Library
+Des:
<!-- DT:Rich -->
<p>The libelf package contains a library for accessing ELF object files.
Libelf allows you to access the internals of the ELF object file format,
so you can see the different sections of an ELF file.
</p>
-Des:
##----------------------------------------
=Pkg: libevent 1.4.5 24.21 src
=Sum: Library Providing an Event Handling API
+Des:
<!-- DT:Rich -->
<p>The libevent library provides a mechanism to execute a function when a
specific event on a file descriptor occurs or after a given time has passed.
</p>
-Des:
##----------------------------------------
=Pkg: libevtlog 0.2.7 4.22 src
=Sum: Syslog-ng event logger library source
+Des:
<!-- DT:Rich -->
<p>The EventLog library aims to be a replacement of the simple syslog() API
provided on UNIX systems. The major difference between EventLog and syslog
is that EventLog tries to add structure to messages.
</p><p>
Where you had a simple non-structrured string in syslog() you have a
combination of description and tag/value pairs.
</p><p>
EventLog provides an interface to build, format and output an event record.
The exact format and output method can be customized by the administrator
via a configuration file.
</p><p>
This package provides the source files.
</p><p>
The package may contain Novell/SUSE specific modifications/extensions,
please report problems using Bugzilla at https://bugzilla.novell.com/
before you contact the authors.
</p><p>
The official home page of syslog-ng is:
http://www.balabit.com/network-security/syslog-ng/
</p>
-Des:
##----------------------------------------
=Pkg: libexif 0.6.17 2.12 src
=Sum: An EXIF Tag Parsing Library for Digital Cameras
+Des:
<!-- DT:Rich -->
<p>This library is used to parse EXIF information from JPEGs created by
digital cameras.
</p>
-Des:
##----------------------------------------
=Pkg: libflaim 4.9.1046 39.22 src
=Sum: Embeddable cross-platform database engine
+Des:
<!-- DT:Rich -->
<p>FLAIM is an embeddable cross-platform database engine that provides a rich, powerful, easy-to-use feature set. It is the database engine used by Novell eDirectory. It has proven to be highly scalable, reliable, and robust. It is available on a wide variety of 32 bit and 64 bit platforms.
</p>
-Des:
##----------------------------------------
=Pkg: libfprint 0.0.6 9.16 src
=Sum: Library for fingerprint reader support
+Des:
<!-- DT:Rich -->
<p>The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices. The fprint project aims to plug a gap in the Linux desktop: support for consumer fingerprint reader devices.
</p>
-Des:
##----------------------------------------
=Pkg: libgcrypt 1.4.1 6.7 src
=Sum: The GNU Crypto Library
+Des:
<!-- DT:Rich -->
<p>Libgcrypt is a general purpose crypto library based on the code used in
GnuPG (alpha version).
</p>
-Des:
##----------------------------------------
=Pkg: libgda 4.1.2 1.3.48 src
=Sum: GNU Data Access (GDA) Library
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) is an attempt to provide uniform access to
different kinds of data sources (databases, information servers, mail spools, and more).
It is a complete architecture that provides all you need to access
your data. It is defined by a set of CORBA interfaces that are as generic as possible
(but very powerful at the same time) so that any kind of data source
can be accessed through them.
</p>
-Des:
##----------------------------------------
=Pkg: libgda3 3.1.5 2.1.76 src
=Sum: GNU Data Access (GDA) Library
+Des:
<!-- DT:Rich -->
<p>GNU Data Access (GDA) is an attempt to provide uniform access to
different kinds of data sources (databases, information servers, mail spools, and more).
It is a complete architecture that provides all you need to access
your data. It is defined by a set of CORBA interfaces that are as generic as possible
(but very powerful at the same time) so that any kind of data source
can be accessed through them.
</p>
-Des:
##----------------------------------------
=Pkg: libglade2 2.6.4 1.2.267 src
=Sum: Glade Library Compatible with the GNOME 2.x Desktop Platform
+Des:
<!-- DT:Rich -->
<p>This library allows you to load Glade interface files in a program at runtime.
It does not require that you use Glade, but Glade is the easiest way to
create the interface files.  For an idea of how to use the library, see the
documentation, especially /usr/share/doc/packages/libglade/test-libgladee.c and
the glade-xml.h include, which is in the libglade package.
</p>
-Des:
##----------------------------------------
=Pkg: libgnome 2.28.0 1.2.198 src
=Sum: The GNOME 2.x Desktop Base Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the basic libraries for the GNOME 2.x Desktop platform.
GNOME has no specific window manager. You are totally
free in your choice. Many GNOME users like Sawfish, Enlightenment, or
IceWM as a window manager for GNOME (see those packages).
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecanvas 2.26.0 1.2.231 src
=Sum: An Add-On for the GNOME User Interface Libraries
+Des:
<!-- DT:Rich -->
<p>Libgnomecanvas is a graphical add-on for the GNOME User Interface libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomecups 0.2.3 109.19 src
=Sum: GNOME CUPS Library
+Des:
<!-- DT:Rich -->
<p>A gobject (GLib) wrapper for IPP printer management, which is used by CUPS.  Mainly used by the GNOME printing system.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomedb 3.1.2 88.7.22 src
=Sum: Library for Writing GNOME Database Programs
+Des:
<!-- DT:Rich -->
<p>Libgnomedb is a library that eases the task of writing
GNOME database programs.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomekbd 2.28.2 1.1.164 src
=Sum: GNOME Keyboard Library
+Des:
<!-- DT:Rich -->
<p>GNOME keyboard library, utility and applet.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprint 2.18.6 2.1.357 src
=Sum: The GNOME 2.x Printing Library
+Des:
<!-- DT:Rich -->
<p>This package contains the GNOME 2.x printing library, which provides a simple and clean API for GNOME programs that have to print documents.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeprintui 2.18.4 2.1.218 src
=Sum: User Interface Part of the GNOME Printing Library
+Des:
<!-- DT:Rich -->
<p>This library contains all user-interface related functions to the GNOME printing subsystem.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomesu 1.0.0 307.5.12 src
=Sum: GNOME su Library
+Des:
<!-- DT:Rich -->
<p></p><p>
Libgnomesu is a library for providing superuser privileges to GNOME
applications. It supports sudo, consolehelper, PAM, and su.
</p>
-Des:
##----------------------------------------
=Pkg: libgnomeui 2.24.2 1.1.187 src
=Sum: The GNOME User Interface Library
+Des:
<!-- DT:Rich -->
<p>This library contains all the user interface-related functions for GNOME-based software. You need the libgnomeui-devel package if you want to develop GNOME 2.x Desktop software.
</p>
-Des:
##----------------------------------------
=Pkg: libgpg-error 1.6 8.6 src
=Sum: Library That Defines Common Error Values for All GnuPG Components
+Des:
<!-- DT:Rich -->
<p>This is a library that defines common error values for all GnuPG
components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
pinentry, SmartCard Daemon, and possibly more in the future.
</p>
-Des:
##----------------------------------------
=Pkg: libgphoto2 2.4.3 3.25.73 src
=Sum: A Digital Camera Library
+Des:
<!-- DT:Rich -->
<p>gPhoto (GNU Photo) is a set of libraries for previewing, retrieving, and capturing images from a range of supported digital cameras to your local hard drive.
It does not support digital cameras based on the USB storage protocol.
Those can be mounted by Linux directly.
</p><p>
As of this time, gPhoto supports around 500 cameras, listed on:
</p><p>
http://gphoto.sourceforge.net/proj/libgphoto2/support.php
</p><p>
or by running
</p><p>
gphoto2 --list-cameras
</p>
-Des:
##----------------------------------------
=Pkg: libgsf 1.14.9 2.27 src
=Sum: GNOME Structured File Library
+Des:
<!-- DT:Rich -->
<p>A library for reading and writing structured files (MS OLE and Zip, for example).
</p>
-Des:
##----------------------------------------
=Pkg: libgsm 1.0.12 2.21 src
=Sum: GSM 06.10 Lossy Speech Compressor Library and Utilities
+Des:
<!-- DT:Rich -->
<p>Contains libraries and binaries for a GSM speech compressor.
libgsm contains a standard implementation of the European GSM 06.10 provisional standard for full-rate speech transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse excitation/long term prediction) coding at 13 kbit/s.
GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling rate, which is a frame rate of 50 Hz) into 260 bits. For compatibility with typical UNIX applications, our implementation turns frames of 160 16-bit linear samples into 33-byte frames (1650 Bytes/s).
The quality of the algorithm is good enough for reliable speaker recognition. Even music often survives transcoding in recognizable form (given the bandwidth limitations of 8 kHz sampling rate).
The interfaces offered are a front-end modeled after compress(1) and a library API.  Compression and decompression run faster than real-time on most SPARC stations.  The implementation has been verified against the ETSI standard test patterns.
</p>
-Des:
##----------------------------------------
=Pkg: libgssglue 0.1 6.22 src
=Sum: Generic GSSAPI Library
+Des:
<!-- DT:Rich -->
<p>This library exports a gssapi interface, but does not implement any gssapi
mechanisms itself. Instead it calls gssapi routines in other libraries,
depending on the mechanism.
</p>
-Des:
##----------------------------------------
=Pkg: libgtkhtml 2.11.1 64.23.220 src
=Sum: A Library for HTML Support in GTK2.0
+Des:
<!-- DT:Rich -->
<p>Libgtkhtml provides extensions for GTK to handle the HTML format. It is widely used by applications for the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: libgtop 2.28.0 1.2.20 src
=Sum: LibGTop Library
+Des:
<!-- DT:Rich -->
<p></p><p>
A library that fetches information about the running system, such as
CPU and memory usage and active processes.
</p><p>
On Linux systems, this information is taken directly from the /proc
file system. On other systems, a server is used to read
information from /dev/kmem.
</p>
-Des:
##----------------------------------------
=Pkg: libgweather 2.28.0 1.4.8 src
=Sum: Library to get online weather information
+Des:
<!-- DT:Rich -->
<p>This is a library to download weather information from online sources.
</p>
-Des:
##----------------------------------------
=Pkg: libhangul 0.0.9 3.1.41 src
=Sum: Hangul input library used by scim-hangul
+Des:
<!-- DT:Rich -->
<p>Hangul input library used by scim-hangul
</p>
-Des:
##----------------------------------------
=Pkg: libibcommon 1.1.2_20081020 5.12 src
=Sum: Common Utility functions for IB diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibcommon provides common utility functions for the IB diagnostic and
management tools
</p>
-Des:
##----------------------------------------
=Pkg: libibmad 1.2.3_20081118 2.10 src
=Sum: Low layer Infiniband functions for use by diagnostic and management programs
+Des:
<!-- DT:Rich -->
<p>libibmad provides low layer IB functions for use by the IB diagnostic and management programs. These include MAD, SA, SMP, and other basic IB functions
</p>
-Des:
##----------------------------------------
=Pkg: libibumad 1.2.3_20081118 2.11 src
=Sum: User MAD library functions used by Infiniband diagnostic and management tools
+Des:
<!-- DT:Rich -->
<p>libibumad provides the user MAD library functions which sit on top of
the user MAD modules in the kernel. These are used by the IB diagnostic
and management tools, including OpenSM
</p>
-Des:
##----------------------------------------
=Pkg: libical 0.43 1.1.40 src
=Sum: An Implementation of Basic iCAL Protocols
+Des:
<!-- DT:Rich -->
<p>Libical is an open source implementation of the IETF&#39;s iCalendar calendaring and scheduling protocols (RFC 2445, 2446, and 2447). It parses iCal components and provides a C API for manipulating the component properties, parameters, and subcomponents.
</p>
-Des:
##----------------------------------------
=Pkg: libidl 0.8.13 1.1.57 src
=Sum: IDL Parsing Library
+Des:
<!-- DT:Rich -->
<p>LibIDL is a small library for creating parse trees of CORBA
v2.2-compliant Interface Definition Language (IDL) files. IDL is a
specification for defining interfaces that can be used between
different CORBA implementations.
</p>
-Des:
##----------------------------------------
=Pkg: libidn 1.10 3.18 src
=Sum: Support for Internationalized Domain Names (IDN)
+Des:
<!-- DT:Rich -->
<p>GNU Libidn is an implementation of the Stringprep, Punycode, and IDNA specifications defined by the IETF Internationalized Domain Names (IDN) working group. It is used to prepare internationalized strings (such as domain name labels, usernames, and passwords) in order to increase the likelihood that string input and string comparison work in ways that make sense for typical users around the world. The library contains a generic Stringprep implementation that does Unicode 3.2 NFKC normalization, mapping and prohibition of characters, and bidirectional character handling. Profiles for iSCSI, Kerberos 5, Nameprep, SASL, and XMPP are included. Punycode and ASCII Compatible Encoding (ACE) via IDNA is supported.
</p>
-Des:
##----------------------------------------
=Pkg: libiniparser 2.17 87.17 src
=Sum: Library to parse ini files
+Des:
<!-- DT:Rich -->
<p>Libiniparser offers parsing of ini files from the C level.
</p>
-Des:
##----------------------------------------
=Pkg: libjingle 0.3.11 7.14 src
=Sum: Library for Peer-to-Peer Applications
+Des:
<!-- DT:Rich -->
<p>Libjingle is a collection of open-source C++ code and sample applications that enables you to build a peer-to-peer application.
</p>
-Des:
##----------------------------------------
=Pkg: libksba 1.0.4 1.16 src
=Sum: A X.509 Library
+Des:
<!-- DT:Rich -->
<p>KSBA is a library to simplify the task of working with X.509
certificates, CMS data, and related data.
</p>
-Des:
##----------------------------------------
=Pkg: liblazy1 0.2 35.16 src
=Sum: Liblazy - D-Bus methods provided for convenience
+Des:
<!-- DT:Rich -->
<p>Liblazy is a simple and easy to use library that provides convenient functions for sending messages over the D-Bus daemon, querying information from HAL or asking PolicyKit for a privilege.
</p>
-Des:
##----------------------------------------
=Pkg: libmcrypt 2.5.8 43.21 src
=Sum: Data Encryption Library
+Des:
<!-- DT:Rich -->
<p>Libmcrypt  is a data encryption library.  The library
is thread safe and provides encryption and decryption
functions. This version of the library supports many
encryption algorithms and encryption modes. Supported algorithms
include SERPENT, RIJNDAEL, 3DES, GOST,
SAFER+, CAST-256, RC2, XTEA, 3WAY, TWOFISH, BLOWFISH, ARC.
FOUR, and WAKE.
</p>
-Des:
##----------------------------------------
=Pkg: libmng 1.0.10 46.18 src
=Sum: Library for Support of MNG and JNG Formats
+Des:
<!-- DT:Rich -->
<p>This library can handle MNG and JNG formats that contain animated pictures.
These formats should replace the GIF format.
</p>
-Des:
##----------------------------------------
=Pkg: libmpcdec 1.2.6 4.22 src
=Sum: Musepack Audio Decoder
+Des:
<!-- DT:Rich -->
<p>Musepack is an audio compression format with a strong emphasis on high quality. It is not lossless, but it is designed for transparency, so that you cannot hear differences between the original WAV file and the much smaller MPC file.
</p><p>
It is based on the MPEG-1 Layer-2 / MP2 algorithms, but since 1997 it has rapidly developed and vastly improved and is now at an advanced stage in which it contains heavily optimized and patentless code.
</p><p>
Musepack is not particularly optimized for low bit rates. The encoder was designed to be transparent at the --standard setting, thus little low bit rate tuning has gone into the codec, unlike that of AAC, Vorbis, WMA, and others that focus more on this region.
</p>
-Des:
##----------------------------------------
=Pkg: libmsn 3.9.97 1.1.74 src
=Sum: Reusable, open-source library for MSN Messenger
+Des:
<!-- DT:Rich -->
<p>Libmsn is a reusable, open-source, fully documented library for connecting to Microsoft&#39;s MSN Messenger service.
</p>
-Des:
##----------------------------------------
=Pkg: libmspack 0.0.20060920alpha 66.8 src
=Sum: Library That Implements Different Microsoft Compressions
+Des:
<!-- DT:Rich -->
<p>The purpose of libmspack is to provide both compression and decompression of some loosely related file formats used by Microsoft. Currently the most common formats are implemented.
</p>
-Des:
##----------------------------------------
=Pkg: libmtp 0.3.4 2.19 src
=Sum: Commandline utilities for access to MTP Players
+Des:
<!-- DT:Rich -->
<p>This package contains binaries and documentation that allow accessto USB based media players based on the MTP (Media TransferProtocol) authored by Microsoft.
</p><p>
Common devices using this technology are Creative Zen, iRiver, Samsung and others.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz 2.1.5 5.18 src
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index.
This server is designed to enable audio CD, MP3 and Vorbis players to download
metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libmusicbrainz3 3.0.2 1.25 src
=Sum: Library That Provides Access to the MusicBrainz Server
+Des:
<!-- DT:Rich -->
<p>MusicBrainz is the second generation incarnation of the CD Index. This
server is designed to enable audio CD, MP3 and Vorbis players to
download metadata about the music they are playing.
</p>
-Des:
##----------------------------------------
=Pkg: libnice 0.0.9 1.1.181 src
=Sum: Interactive Connectivity Establishment implementation
+Des:
<!-- DT:Rich -->
<p>libnice is an implementation of the IETF&#39;s draft Interactive Connectivity Establishment standard (ICE).
</p>
-Des:
##----------------------------------------
=Pkg: libnl 1.1 49.18 src
=Sum: Convenience library for kernel netlink sockets
+Des:
<!-- DT:Rich -->
<p>This package contains a convenience library to simplify
using the Linux kernels netlink sockets interface for
network manipulation.
</p>
-Des:
##----------------------------------------
=Pkg: libnotify 0.4.4 173.27.1 src
=Sum: Notifications Library
+Des:
<!-- DT:Rich -->
<p>D-BUS notifications library.
</p>
-Des:
##----------------------------------------
=Pkg: libnscd 2.0.2 73.18 src
=Sum: Library to Allow Applications to Communicate with nscd
+Des:
<!-- DT:Rich -->
<p>This library provides an interface for applications to NSCD (Name Service Cache Daemon) and allowsthose applications, to flushthe cache for special services, if they have the necessary permissions.
</p>
-Des:
##----------------------------------------
=Pkg: libofa 0.9.3 73.18 src
=Sum: Open Fingerprint Architecture Library
+Des:
<!-- DT:Rich -->
<p>MusicDNS and the Open Fingerprint Architecture provide a system for identifying a piece of music with nothing more than the sound of the piece itself.
</p><p>
This library is by design compatible with the MusicDNS web service.
Non-commercial access to the service is available at http://www.musicdns.org.
</p>
-Des:
##----------------------------------------
=Pkg: libogg 1.1.3 87.12 src
=Sum: Ogg Bitstream Library
+Des:
<!-- DT:Rich -->
<p>Libogg is a library for manipulating ogg bitstreams.  It handles
both making ogg bitstreams and getting packets from ogg bitstreams.
</p><p>
Ogg is the native bitstream format of the <a href="pkg://libvorbis"> Ogg Vorbis audio codec </a>
and the <a href="pkg://libtheora"> Theora video codec</a>
</p>
-Des:
##----------------------------------------
=Pkg: liboil 0.3.15 3.10 src
=Sum: Library of Optimized Inner Loops
+Des:
<!-- DT:Rich -->
<p>Liboil is a library of simple functions that are optimized for various CPUs. These functions are generally loops implementing simple algorithms, such as converting an array of N integers to floating-point numbers or multiplying and summing an array of N numbers. Such functions are candidates for significant optimization using various techniques, especially by using extended instructions provided by modern CPUs (Altivec, MMX, SSE, etc.).
</p><p>
Many multimedia applications and libraries already do similar things internally. The goal of this project is to consolidate some of the code used by various multimedia projects and also make optimizations easier to use by a broader range of applications.
</p>
-Des:
##----------------------------------------
=Pkg: libopenraw 0.0.5 6.28 src
=Sum: A library to decode digtal camera RAW files
+Des:
<!-- DT:Rich -->
<p>libopenraw is a library that aim at decoding digital camera RAW files.
</p>
-Des:
##----------------------------------------
=Pkg: libotf 0.9.7 2.17 src
=Sum: Library for Handling OpenType Fonts
+Des:
<!-- DT:Rich -->
<p>Library for handling OpenType fonts.
</p>
-Des:
##----------------------------------------
=Pkg: libotr 3.2.0 1.16 src
=Sum: "Off The Record" messaging library toolkit
+Des:
<!-- DT:Rich -->
<p>Off-the-Record (OTR) Messaging allows you to have private conversations
over instant messaging by providing:
Encryption
No one else can read your instant messages.
Authentication
You are assured the correspondent is who you think it is.
Deniability
The messages you send do not have digital signatures that are checkable
by a third party. Anyone can forge messages after a conversation to make
them look like they came from you. However, during a conversation, your
correspondent is assured the messages he sees are authentic and
unmodified.
Perfect forward secrecy
If you lose control of your private keys, no previous conversation is
compromised.
</p>
-Des:
##----------------------------------------
=Pkg: libp11 0.2.4 3.14 src
=Sum: Library Implementing a Small Layer on Top of PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>Libp11 is a library implementing a small layer on top of PKCS#11 API to make using PKCS#11 implementations easier.
</p><p>
The official name for PKCS#11 is &quot;RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p><p>
Libp11 source code includes the official header files (version 2.20) and thus is &quot;derived from the RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki)&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: libpcap 0.9.8 50.4.80 src
=Sum: A Library for Network Sniffers
+Des:
<!-- DT:Rich -->
<p>libpcap is a library used by packet sniffer programs. It provides an
interface for them to capture and analyze packets from network devices.
This package is only needed if you plan to compile or write such a
program yourself.
</p>
-Des:
##----------------------------------------
=Pkg: libpng12-0 1.2.31 5.12.1 src
=Sum: Library for the Portable Network Graphics Format (PNG)
+Des:
<!-- DT:Rich -->
<p>libpng is the official reference library for the Portable Network Graphics format (PNG).
</p>
-Des:
##----------------------------------------
=Pkg: libproxy 0.3.1 1.1.42 src
=Sum: libproxy is a library that provides automatic proxy configuration management
+Des:
<!-- DT:Rich -->
<p>libproxy offers the following features:
libproxy offers the following features:<ul>
<li>extremely small core footprint (&lt; 35K)
</li><li>no external dependencies within libproxy core (libproxy plugins may have dependencies)
</li><li>only 3 functions in the stable external API
</li><li>dynamic adjustment to changing network topology
</li><li>a standard way of dealing with proxy settings across all scenarios
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: libpst 0.6.17 2.17 src
=Sum: A library for reading PST files
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libpst 0.6.44 1.1.43 src
=Sum: A library for reading PST files
+Des:
<!-- DT:Rich -->
<p>The Libpst utilities include readpst which can convert email messages
to both mbox and MH mailbox formats, pst2ldif which can convert the
contacts to .ldif format for import into ldap databases, and pst2dii
which can convert email messages to the DII load file format used by
Summation.
</p>
-Des:
##----------------------------------------
=Pkg: libqca2 2.0.1 1.28 src
=Sum: Qt Cryptographic Architecture 2
+Des:
<!-- DT:Rich -->
<p>This package provides a generic Qt cryptographic architecture, including a library and a plug-in for using all supported capabilities of openssl, like SSL/TLS, X509, RSA, SHA1, MD5, Blowfish, 3DES, and AES.
</p><p>
It can be extended by further plug-ins, for example, with qca-sasl for SASL support.
</p>
-Des:
##----------------------------------------
=Pkg: libqimageblitz4 0.0.4 35.25.94 src
=Sum: Image Effect Library for KDE
+Des:
<!-- DT:Rich -->
<p>Blitz is an interm image effect library that people can use until KDE 4.1 is released. KImageEffect, the old image effect class is being dropped for KDE 4.0 and the replacement, Quasar, won&#39;t be ready until KDE 4.1. Blitz gives people something to use in the meantime.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4 4.6.2 1.6.9 src
=Sum: C++ Program Library, Core Components
+Des:
<!-- DT:Rich -->
<p>Qt is a set of libraries for developing applications.
</p><p>
This package contains base tools, like string, xml, and network handling.
</p>
-Des:
##----------------------------------------
=Pkg: libqt4-sql-plugins 4.6.2 1.6.11 src
=Sum: Qt 4 SQL-Related Libraries
+Des:
<!-- DT:Rich -->
<p>Qt 4 libraries that are used for connection with an SQL server.
You need a plug-in package for a supported SQL server as well.
</p>
-Des:
##----------------------------------------
=Pkg: libqtpod 0.4.2 4.25 src
=Sum: A Qt based library to access the data on an Apple iPod
+Des:
<!-- DT:Rich -->
<p>A Qt based library to access the data on an Apple iPod
</p>
-Des:
##----------------------------------------
=Pkg: libraw1394 1.3.0 17.17 src
=Sum: A Firewire Interface
+Des:
<!-- DT:Rich -->
<p>A library for the Linux IEEE-1394 subsystem, which provides
direct access to the connected 1394 (Firewire) bus.
</p>
-Des:
##----------------------------------------
=Pkg: libreiserfs 0.3.0.5 143.3 src
=Sum: ReiserFS File System Access Library
+Des:
<!-- DT:Rich -->
<p>This is a library for reiserfs file system access and manipulation.
The primary goal is to develop the nice, full functionality library
that can be linked to any projects that needed reiserfs file system
access. These include GNU Parted, GNU GRUB, Yaboot, Partimage, and EVMS.
</p><p>
The second goal is high maintainability source code.
</p><p>
The third goal is to develop an alternative set of the reiserfs programs as
small and nice front-ends to this library.
</p><p>
libreiserfs has a number of high level APIs for accessing reiserfs
file systems. There are main file system code (reiserfs_fs_open, reiserfs_fs_close, reiserfs_fs_create, reiserfs_fs_resize, reiserfs_fs_journal_tune, etc), journal code, bitmap code, directories
and files access code, and device abstraction layer.
</p><p>
progsreiserfs supports versions 3.5 and 3.6 with standard and relocated journal.
It also supports all possible block sizes supported by the kernel (2.4.18 with patches or 2.4.19).
</p><p>
The project home page is http://reiserfs.linux.kiev.ua/.
</p>
-Des:
##----------------------------------------
=Pkg: librsvg 2.26.0 2.1.227 src
=Sum: A Library for Rendering SVG Data
+Des:
<!-- DT:Rich -->
<p>This package contains a library to render SVG (scalable vector graphics)
data. This format has been specified by the W3C (see http://www.w3c.org).
</p>
-Des:
##----------------------------------------
=Pkg: libsamplerate 0.1.4 1.15 src
=Sum: A Sample Rate Converter Library
+Des:
<!-- DT:Rich -->
<p>Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter for audio. One example of where such a thing would be useful is in converting audio from the CD sample rate of 44.1kHz to the 48kHz sample rate used by DAT players.
</p><p>
SRC is capable of arbitrary and time varying conversions; from downsampling by a factor of 12 to upsampling by the same factor.  The conversion ratio can also vary with time for speeding up and slowing down effects.
</p>
-Des:
##----------------------------------------
=Pkg: libsatsolver 0.14.17 0.2.18 src
=Sum: A new approach to package dependency solving
+Des:
<!-- DT:Rich -->
<p>A new approach to package dependency solving
</p>
-Des:
##----------------------------------------
=Pkg: libselinux 2.0.71 3.98 src
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: libselinux-bindings 2.0.71 3.25 src
=Sum: SELinux library and simple utilities
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libselinux provides an API for SELinux applications to get and set
process and file security contexts and to obtain security policy
decisions.  Required for any applications that use the SELinux API.
</p>
-Des:
##----------------------------------------
=Pkg: libsemanage 2.0.27 4.14 src
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsemanage provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsensors3 2.10.6 10.15 src
=Sum: Hardware health monitoring library
+Des:
<!-- DT:Rich -->
<p>libsensors offers a way for applications to access the hardware monitoring chips of the system. A system-dependent configuration file controls how the different inputs are labeled and what scaling factors have to be applied for the specific hardware, so that the output makes sense to the user.
</p>
-Des:
##----------------------------------------
=Pkg: libsepol 2.0.32 5.99 src
=Sum: SELinux binary policy manipulation library
+Des:
<!-- DT:Rich -->
<p>Security-enhanced Linux is a feature of the Linux(R) kernel and a number
of utilities with enhanced security functionality designed to add
mandatory access controls to Linux.  The Security-enhanced Linux
kernel contains new architectural components originally developed to
improve the security of the Flask operating system. These
architectural components provide general support for the enforcement
of many kinds of mandatory access control policies, including those
based on the concepts of Type Enforcement(R), Role-based Access
Control, and Multi-level Security.
</p><p>
libsepol provides an API for the manipulation of SELinux binary policies.
It is used by checkpolicy (the policy compiler) and similar tools, as well
as by programs like load_policy that need to perform specific transformations
on binary policies such as customizing policy boolean settings.
</p>
-Des:
##----------------------------------------
=Pkg: libsexy 0.1.11 168.26 src
=Sum: Extended Widgets for GTK+
+Des:
<!-- DT:Rich -->
<p>A set of extensions on top of GTK+ widgets, to provide extra functionality.
</p>
-Des:
##----------------------------------------
=Pkg: libshout 2.2.2 116.32 src
=Sum: Library for Communication with icecast Server
+Des:
<!-- DT:Rich -->
<p>Libshout is a library for communicating with and sending data to an icecast server.  It handles the socket connection, the timing of the data, and prevents bad data from getting to the icecast server.
</p>
-Des:
##----------------------------------------
=Pkg: libsigc++2 2.2.2 40.22 src
=Sum: Typesafe Signal Framework for C++
+Des:
<!-- DT:Rich -->
<p>This library implements a full callback system for use in widget
libraries, abstract interfaces, and general programming. It is the most
complete library of its kind with the ablity to connect an abstract
callback to a class method, function, or function object. It contains
adaptor classes for connection of dissimilar callbacks and has an ease
of use unmatched by other C++ callback libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libslab 2.27.91 6.9.24 src
=Sum: Library to create tile-based UI for GNOME
+Des:
<!-- DT:Rich -->
<p>This library makes it easy to create tile-based UI for GNOME, as seen in
gnome-main-menu.
</p>
-Des:
##----------------------------------------
=Pkg: libsmbios 2.0.2 11.8.4 src
=Sum: Open BIOS parsing libs
+Des:
<!-- DT:Rich -->
<p>Libsmbios is a library and utilites that can be used by client programs
to get information from standard BIOS tables, such as the SMBIOS table.
</p>
-Des:
##----------------------------------------
=Pkg: libsndfile 1.0.20 2.1.46 src
=Sum: A Library to Handle Various Audio File Formats
+Des:
<!-- DT:Rich -->
<p>Libsndfile is a C library for reading and writing sound files, such as
AIFF, AU, and WAV files, through one standard interface.  It can currently
read and write 8, 16, 24, and 32-bit PCM files as well as 32-bit floating point
WAV files and a number of compressed formats.
</p>
-Des:
##----------------------------------------
=Pkg: libsoup 2.28.2 0.1.151 src
=Sum: Simple Object Access Protocol (SOAP)
+Des:
<!-- DT:Rich -->
<p>Soup is a SOAP (Simple Object Access Protocol) implementation in C.
</p><p>
It provides a queued asynchronous callback-based mechanism for sending and
servicing SOAP requests and a WSDL (Web Service Definition Language) to C
compiler that generates client stubs and server skeletons for easily calling
and implementing SOAP methods.
</p><p>
It uses the Glib main loop and is designed to work well with GTK+
applications.  This enables GNOME applications to access SOAP servers
on the network in a completely asynchronous fashion, very similar to the
GTK+ programming model (a synchronous operation mode is also supported
for those who want it).
</p><p>
The WSDL compiler helps you make your applications interoperate
with services that expose their descriptions through WSDL.
</p>
-Des:
##----------------------------------------
=Pkg: libspectre 0.2.1 2.24 src
=Sum: Library for Rendering PostScript Documents
+Des:
<!-- DT:Rich -->
<p>libspectre is a small library for rendering Postscript documents. It provides a convenient easy to use API for handling and rendering Postscript documents.
</p>
-Des:
##----------------------------------------
=Pkg: libssh 0.2 5.16.1 src
=Sum: SSH library
+Des:
<!-- DT:Rich -->
<p>The ssh library was designed to be used by programmers needing a working SSH
implementation by the mean of a library. The complete control of the client is
made by the programmer. With libssh, you can remotely execute programs,
transfer files, use a secure and transparent tunnel for your remote programs.
With its Secure FTP implementation, you can play with remote files easily,
without third-party programs others than libcrypto (from openssl).
</p><p>
This package provides libssh from http://0xbadc0de.be/ that should not be
confused with libssh2 available from http://www.libssh2.org (libssh2 package)
</p>
-Des:
##----------------------------------------
=Pkg: libssh2_org 0.19.0+20080814 2.14 src
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libssh2_org 0.19.0+20080814 2.16.1 src
=Sum: A library implementing the SSH2 protocol
+Des:
<!-- DT:Rich -->
<p>libssh2 is a library implementing the SSH2 protocol as defined by Internet Drafts: SECSH-TRANS, SECSH-USERAUTH, SECSH-CONNECTION, SECSH-ARCH, SECSH-FILEXFER, SECSH-DHGEX, SECSH-NUMBERS, and SECSH-PUBLICKEY.
</p>
-Des:
##----------------------------------------
=Pkg: libtasn1 1.5 1.24.41 src
=Sum: ASN.1 parsing library
+Des:
<!-- DT:Rich -->
<p>This is the ASN.1 library used in GNUTLS.
More up to date information can be found at
http://www.gnu.org/software/gnutls and http://www.gnutls.org
</p>
-Des:
##----------------------------------------
=Pkg: libtheora 1.0.beta2 6.1.1 src
=Sum: Free Video Codec
+Des:
<!-- DT:Rich -->
<p>Theora is a free video codec based on VP3. The package contains the library
that can decode and encode Theora streams. Theora is also able to playback VP3 streams.
</p>
-Des:
##----------------------------------------
=Pkg: libtirpc 0.2.1 1.2.16 src
=Sum: Transport Independent RPC Library
+Des:
<!-- DT:Rich -->
<p>The Transport Independent RPC library (TI-RPC) is a replacement for
the standard SunRPC library in glibc which does not support IPv6
addresses. This implementation allows the support of other transports
than UDP and TCP over IPv4
</p>
-Des:
##----------------------------------------
=Pkg: libunique 1.1.2 1.1.279 src
=Sum: A library for writing single instance application
+Des:
<!-- DT:Rich -->
<p>Unique is a library for writing single instance application. If you launch a single instance application twice, the second instance will either just quit or will send a message to the running instance.
</p>
-Des:
##----------------------------------------
=Pkg: libusb 0.1.12 139.1.1 src
=Sum: USB Libraries
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libusb-1_0 0.9.3 4.22 src
=Sum: USB Library
+Des:
<!-- DT:Rich -->
<p>Libusb is a library that allows userspace access to USB devices.
</p>
-Des:
##----------------------------------------
=Pkg: libustr 1.0.4 3.22 src
=Sum: String library, very low memory overhead, simple to import
+Des:
<!-- DT:Rich -->
<p>Micro string library, very low overhead from plain strdup() (Ave. 44% for
0-20B strings). Very easy to use in existing C code. At it&#39;s simplest you can
just include a single header file into your .c and start using it.
This package also distributes pre-built shared libraries.
</p>
-Des:
##----------------------------------------
=Pkg: libvirt 0.7.6 1.9.8 src
=Sum: A C toolkit to interract with the virtualization capabilities of Linux
+Des:
<!-- DT:Rich -->
<p>Libvirt is a C toolkit to interract with the virtualization capabilities Linux. Virtualization of the Linux Operating System means the ability to run multiple instances of Operating Systems concurently on a single hardware system where the basic resources are driven by a Linux instance. The library aims to provide long term stable C API initially for the Xen paravirtualization but should be able to integrate other virtualization mechanisms if needed.
</p>
-Des:
##----------------------------------------
=Pkg: libvisual 0.4.0 175.12 src
=Sum: Sound Visualization Library
+Des:
<!-- DT:Rich -->
<p>Libvisual is a library that acts as a middle layer between
applications that need audio visualization and audio visualization
plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: libvoikko 2.0 2.26 src
=Sum: Spellchecker and Hyphenator for Finnish Language
+Des:
<!-- DT:Rich -->
<p>Voikko is a Finnish spellchecker and hyphenator based on Malaga and Suomi-Malaga.
</p>
-Des:
##----------------------------------------
=Pkg: libvorbis 1.2.0 79.12 src
=Sum: The Vorbis General Audio Compression Codec
+Des:
<!-- DT:Rich -->
<p>Vorbis is a fully open, nonproprietary, patent-and-royalty-free,
and general-purpose compressed audio format for audio and music at fixed
and variable bit rates from 16 to 128 kbps/channel.
</p><p>
The native bitstream format of Vorbis is <a href="pkg://libogg"> Ogg</a>.
Alternatively, <a href="pkg://libmatroska"> matroska</a> can also be used.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit 1.1.15.1 1.3.146 src
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwebkit1_0 1.0.1 0.1.141 src
=Sum: Library for rendering web content, GTK+ Port
+Des:
<!-- DT:Rich -->
<p>WebKit is a web content engine, derived from KHTML and KJS from KDE, and
used primarily in Apple&#39;s Safari browser.  It is made to be embedded in
other applications, such as mail readers, or web browsers.
</p><p>
It is able to display content such as HTML, SVG, XML, and others. It also
supports DOM, XMLHttpRequest, XSLT, CSS, Javascript/ECMAscript and more.
</p>
-Des:
##----------------------------------------
=Pkg: libwnck 2.28.0 2.2.263 src
=Sum: Window Navigator Construction Kit (Library Package)
+Des:
<!-- DT:Rich -->
<p>The Window Navigator Construction Kit is a library that can be used
to write task lists, pagers, and similar GNOME programs.
</p>
-Des:
##----------------------------------------
=Pkg: libwpd 0.8.14 4.33 src
=Sum: Library for Importing WordPerfect (tm) Documents
+Des:
<!-- DT:Rich -->
<p>libwpd is a general purpose library for reading or interpreting data from WordPerfect files. The library is not a stand-alone utility: it is designed to be used by another program (for example, a word processor) as an in-process component.
</p>
-Des:
##----------------------------------------
=Pkg: libwpg 0.1.3 3.33 src
=Sum: Library to read and parse graphics in WordPerfect Graphics format
+Des:
<!-- DT:Rich -->
<p>libwpg is a C++ library to read and parse graphics in WPG (WordPerfect Graphics) format. It is cross-platform, at the moment it can be build on Microsoft Windows and Linux.
</p>
-Des:
##----------------------------------------
=Pkg: libwps 0.1.2 5.33 src
=Sum: Library for importing the Microsoft Works word processor file format
+Des:
<!-- DT:Rich -->
<p>libwps is a library (for use by word procesors, for example) for importing the Microsoft Works word processor file format.
</p>
-Des:
##----------------------------------------
=Pkg: libxcrypt 3.0.3 0.1.50 src
=Sum: Crypt Library for DES, MD5, Blowfish and others
+Des:
<!-- DT:Rich -->
<p>Libxcrypt is a replacement for libcrypt, which comes with the
GNU C Library. It supports DES crypt, MD5, SHA256, SHA512 and passwords with
blowfish encryption.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier 3.7 1.20 src
=Sum: Library with X keyboard related functions
+Des:
<!-- DT:Rich -->
<p>This library allows you to simplify XKB-related development.
</p>
-Des:
##----------------------------------------
=Pkg: libxklavier 4.0 1.1.73 src
=Sum: Library with X keyboard related functions
+Des:
<!-- DT:Rich -->
<p>This library allows you to simplify XKB-related development.
</p>
-Des:
##----------------------------------------
=Pkg: libxml2 2.7.6 0.1.37 src
=Sum: A Library to Manipulate XML Files
+Des:
<!-- DT:Rich -->
<p>The XML C library was initially developed for the GNOME project. It is now
used by many programs to load and save extensible
data structures or manipulate any kind of XML files.
</p><p>
This library implements
a number of existing standards related to markup languages, including the
XML standard, name spaces in XML, XML Base, RFC 2396, XPath, XPointer,
HTML4, XInclude, SGML catalogs, and XML catalogs. In most cases, libxml
tries to implement the specification in a rather strict way. To some
extent, it provides support for the following specifications, but does not
claim to implement them: DOM, FTP client, HTTP client, and SAX.
</p><p>
The library also supports RelaxNG. Support for W3C XML Schemas is in progress.
</p>
-Des:
##----------------------------------------
=Pkg: libxslt 1.1.24 19.15 src
=Sum: XSL Transformation Library
+Des:
<!-- DT:Rich -->
<p>This C library allows you to transform XML files into other XML files
(or HTML, text, and more) using the standard XSLT stylesheet transformation
mechanism.
</p><p>
It is based on libxml (version 2) for XML parsing, tree manipulation, and
XPath support. It is written in plain C, making as few assumptions as
possible and sticks closely to ANSI C/POSIX for easy embedding. Although not primarily designed
with performance in mind, libxslt seems to be a relatively fast
processor. It also includes full support for the EXSLT set of extension
functions as well as some common extensions present in other XSLT engines.
</p><p>
The package comes with xsltproc, a command line interface to the XSLT engine.
</p>
-Des:
##----------------------------------------
=Pkg: libyui-bindings 0.1.0 5.26 src
=Sum: Ruby bindings for yast2-libyui
+Des:
<!-- DT:Rich -->
<p>This package provides Ruby language bindings to access functions of yast2-libyui - the YaST User Interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p>
-Des:
##----------------------------------------
=Pkg: libzio 0.9 5.77 src
=Sum: A Library for Accessing Compressed Text Files
+Des:
<!-- DT:Rich -->
<p>Libzio provides a wrapper function for reading or writing gzip or bzip2
files with FILE streams.
</p>
-Des:
##----------------------------------------
=Pkg: libzip1 0.9 1.22 src
=Sum: C library for reading, creating, and modifying zip archives
+Des:
<!-- DT:Rich -->
<p>libzip is a C library for reading, creating, and modifying zip archives. Files can be added from data buffers, files, or compressed data copied directly from other zip archives. Changes made without closing the archive can be reverted. The API is documented by man pages.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp 6.31.4 0.3.8 src
=Sum: Package, Patch, Pattern, and Product Management
##----------------------------------------
=Pkg: libzypp-bindings 0.5.3 1.2.30 src
=Sum: Bindings for libzypp
+Des:
<!-- DT:Rich -->
<p>This package provides bindings for libzypp, the library for package management.
</p>
-Des:
##----------------------------------------
=Pkg: libzypp-tools 0.2.0 1.26 src
=Sum: Tools for ZYpp
+Des:
<!-- DT:Rich -->
<p>Tools for ZYpp
</p>
-Des:
##----------------------------------------
=Pkg: limal 1.5.3 0.2.11 src
=Sum: LiMaL--Core Library
+Des:
<!-- DT:Rich -->
<p>LiMaL is an C++ framework enhancement for BloCXX. This package contains the LiMaL core library which include some basic functionality like logging and file handling.
</p>
-Des:
##----------------------------------------
=Pkg: limal-apparmor-notifications 1.0.0 151.24 src
=Sum: Limal pluglib for AppArmor notifications configuration files
+Des:
<!-- DT:Rich -->
<p>Limal pluglib for AppArmor that provides an API for working with AppArmor&#39;s notification configuration file, notify.cfg.
</p>
-Des:
##----------------------------------------
=Pkg: limal-ca-mgm 1.5.22 0.2.15 src
=Sum: LiMaL--CA Management Library
+Des:
<!-- DT:Rich -->
<p>The LiMaL CA Management Library provides methods for managing a
certificate authority.
</p>
-Des:
##----------------------------------------
=Pkg: limal-nfs-server 1.5.3 0.2.11 src
=Sum: LiMaL--NFS Server Library
+Des:
<!-- DT:Rich -->
<p>LiMaL NFS Server Library provides methods for managing a NFS Server.
</p>
-Des:
##----------------------------------------
=Pkg: linux-atm 2.5.0 135.22 src
=Sum: Tools for ATM
+Des:
<!-- DT:Rich -->
<p>Tools to support ATM (Asynchronous Transfer Mode) networking.
</p>
-Des:
##----------------------------------------
=Pkg: log4c 1.2.1 10.34 src
=Sum: A library of C for flexible logging to files, syslog and other destinations
+Des:
<!-- DT:Rich -->
<p>Log4c is a library of C for flexible logging to files, syslog and other
destinations. It is modeled after the Log for Java library
(http://jakarta.apache.org/log4j/), staying as close to their API as is
reasonable.
</p>
-Des:
##----------------------------------------
=Pkg: log4j 1.2.15 26.30 src
=Sum: Java logging tool
+Des:
<!-- DT:Rich -->
<p>Log4j is a tool to help the programmer output log statements to a variety of output targets.
</p>
-Des:
##----------------------------------------
=Pkg: loudmouth 1.4.2 3.20 src
=Sum: Jabber Client Library Written in C
+Des:
<!-- DT:Rich -->
<p>Loudmouth is a lightweight and easy-to-use C library for programming with the Jabber protocol. It is designed to be easy to get started with and yet extensible to let you do anything the Jabber protocol allows.
</p>
-Des:
##----------------------------------------
=Pkg: lpsolve 5.5.0.13 2.22 src
=Sum: A Mixed Integer Linear Programming (MILP) Solver
+Des:
<!-- DT:Rich -->
<p>Mixed Integer Linear Programming (MILP) solver lpsolve solves pure linear, (mixed) integer/binary, semi-continuous and special ordered sets (SOS) models.
</p>
-Des:
##----------------------------------------
=Pkg: lsb-misctest 3.3 5.21 src
=Sum: Miscelaneous tools for LSB
+Des:
<!-- DT:Rich -->
<p>Miscelaneous tools for LSB.
</p>
-Des:
##----------------------------------------
=Pkg: lzo 2.03 3.18 src
=Sum: A Real-Time Data Compression Library
+Des:
<!-- DT:Rich -->
<p>LZO is a portable lossless data compression library written in ANSI C. It offers pretty fast compression and very fast decompression. Decompression requires no memory.
LZO is suitable for data compression and decompression in real-time. This means it favors speed over compression ratio.
</p>
-Des:
##----------------------------------------
=Pkg: m17n-lib 1.5.1 42.29 src
=Sum: Multilingual Text Processing Library for the C Language
+Des:
<!-- DT:Rich -->
<p>A multilingual text processing library for the C language.
</p>
-Des:
##----------------------------------------
=Pkg: metacity 2.28.1 0.3.36 src
=Sum: A Fast Window Manager for the GNOME 2.x Desktop
+Des:
<!-- DT:Rich -->
<p>Metacity is a fast window manager for the GNOME 2.x Desktop. It can be seen as an alternative to Sawfish. Many users prefer Metacity because it integrates well with the GNOME 2.x Desktop.
</p>
-Des:
##----------------------------------------
=Pkg: mhash 0.9.9 26.21 src
=Sum: A Library for Working with Strong Hashes (Like MD5)
+Des:
<!-- DT:Rich -->
<p>The mhash library provides an easy way to access strong hashes,
such as MD5, SHA1, and other algorithms.
</p>
-Des:
##----------------------------------------
=Pkg: mlterm 2.9.3.20071112 134.41 src
=Sum: Emulateur de terminal multilingue pour X
+Des:
<!-- DT:Rich -->
<p>Mlterm is a multilingual terminal emulator for the X Window System.
</p><p>
Multilingual features:
</p><p>
supported charsets: US_ASCII, ISO8859[1-11], ISO8859[13-16], TCVN5712, VISCII, KOI8_R, KOI8_U, JISX0201, JISX0208, JISX0212, JISX0213, GB2312, GBK, KSC5601, UHC, CNS11643-N, Big5, UCS2(4)
</p><p>
supported encodings: ISO-8859-[1-11], ISO-8859- [13-16], TCVN5612, VISCII, KOI8_R, KOI8_U, EUC-JP, EUC-JISX0213, ISO-2022-JP [1, 2, 3], Shift_JIS, Shift_JISX0213, EUC-KR, UHC, JOHAB, ISO-2022-KR, ISO-2022-CN, GB2312(EUC-CN), GBK, GB18030, EUC-TW, Big5, Hz, UTF-8
</p><p>
character composition: TIS620, TCVN5712, JISX0213, UNICODE
</p><p>
Multiple xims are also supported and you can dynamically change various xims.
</p><p>
Other features:
<ul>
<li>scroll by wheel mouse
</li><li>antialias font (requires Xft and Xrender extensions)
</li><li>proportional font
</li><li>transparent background
</li><li>background image (requires Imlib)
</li><li>multiple pty windows
</li><li>scrollbar plug-in API (unstable)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: mono-core 2.0.1 1.19.1 src
=Sum: A .NET Runtime Environment
+Des:
<!-- DT:Rich -->
<p>The Mono Project is an open development initiative that is working to develop an open source, Unix version of the .NET development platform. Its objective is to enable Unix developers to build and deploy cross-platform .NET applications. The project will implement various technologies that have been submitted to the ECMA for standardization.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nspr 4.8.2 1.1.1 src
=Sum: Netscape Portable Runtime
+Des:
<!-- DT:Rich -->
<p>NSPR provides platform independence for non-GUI operating system facilities. These facilities include threads, thread synchronization, normal file and network I/O, interval timing and calendar time, basic memory management (malloc and free), and shared library linking.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-nss 3.12.6 3.1.1 src
=Sum: Network (Netscape) Security Services
+Des:
<!-- DT:Rich -->
<p>Network Security Services (NSS) is a set of libraries designed to support cross-platform development of security-enabled server applications. Applications built with NSS can support SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME, X.509 v3 certificates, and other security standards.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner190 1.9.0.19 0.1.1 src
=Sum: Mozilla Runtime Environment 1.9
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mozilla-xulrunner191 1.9.1.9 1.12.1 src
=Sum: Mozilla Runtime Environment 1.9.1
+Des:
<!-- DT:Rich -->
<p>XULRunner is a single installable package that can be used to bootstrap
multiple XUL+XPCOM applications that are as rich as Firefox and
Thunderbird.
</p>
-Des:
##----------------------------------------
=Pkg: mpc 0.8 0.1.49 src
=Sum: MPC multiple-precision complex shared library
+Des:
<!-- DT:Rich -->
<p>MPC is a C library for the arithmetic of complex numbers with arbitrarily
high precision and correct rounding of the result. It is built upon and
follows the same principles as MPFR.
</p>
-Des:
##----------------------------------------
=Pkg: mpfr 2.3.2 3.115 src
=Sum: The MPFR multiple-precision floating-point library
+Des:
<!-- DT:Rich -->
<p>The MPFR library is a C library for multiple-precision floating-point computations with exact rounding (also called correct rounding). It is based on the GMP multiple-precision library.
</p><p>
The main goal of MPFR is to provide a library for multiple-precision floating-point computation which is both efficient and has a well-defined semantics. It copies the good ideas from the ANSI/IEEE-754 standard for double-precision floating-point arithmetic (53-bit mantissa).
</p>
-Des:
##----------------------------------------
=Pkg: myspell-dictionaries 20040830 8.18 src
=Sum: A Source Package for Dictionaries Used by MySpell
+Des:
<!-- DT:Rich -->
<p>This source package contains dictionaries for MySpell.
</p><p>
The MySpell spell-checker is used by the OpenOffice.org office suite, the Mozilla Composer, and the Mozilla Mail message composition window.
</p>
-Des:
##----------------------------------------
=Pkg: mysql 5.0.67 13.20.1 src
=Sum: A True Multiuser, Multithreaded SQL Database Server
+Des:
<!-- DT:Rich -->
<p>SQL is the most popular database language in the world. MySQL is a
client/server implementation that consists of a server daemon (mysqld)
and many different client programs and libraries.
</p><p>
The main goals of MySQL are speed, robustness, and ease of use. MySQL
was originally developed because the developers at TcX needed an SQL
server that could handle very large databases an order of magnitude
faster than what any database vendor could offer them. They have now
been using MySQL since 1996 in an environment with more than 40 databases
containing 10,000 tables, of which more than 500 have more than 7 million
rows. This is about 100 gigabytes of mission-critical data.
</p><p>
The base upon which MySQL is built is a set of routines that have been
used in a highly demanding production environment for many years. While
MySQL is still in development, it already offers a rich and highly useful
function set.
</p><p>
The official way to pronounce MySQL is &quot;My Ess Que Ell&quot; (Not MY-SEQUEL).
</p><p>
This package only contains the server-side programs.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus 2.28.4 1.6.8 src
=Sum: The GNOME 2.x Desktop File Manager
+Des:
<!-- DT:Rich -->
<p>This package contains Nautilus, the advanced file manager for the GNOME 2.x Desktop platform.
</p>
-Des:
##----------------------------------------
=Pkg: nautilus-cd-burner 2.25.3 3.1.179 src
=Sum: CD Burning Extension for Nautilus
+Des:
<!-- DT:Rich -->
<p>Nautilus-cd-burner is an extension to Nautilus that makes it easy to
write files to a CD burner.
</p><p>
The user uses Nautilus or another Gnome-VFS aware application to copy the
files to write to &quot;burn:///&quot; then Nautilus-cd-burner is
launched to write the files to the CD.
</p>
-Des:
##----------------------------------------
=Pkg: ncurses 5.6 90.55 src
=Sum: New curses Libraries
+Des:
<!-- DT:Rich -->
<p>As soon as a text application needs to directly control its output to the
screen (if it wants to place the cursor at location (x,y) then
write text), ncurses is used. The panel and the forms libraries are
included in this package. These new libraries support color, special
characters, and panels.
</p>
-Des:
##----------------------------------------
=Pkg: neon 0.28.3 2.12.1 src
=Sum: An HTTP and WebDAV Client Library
+Des:
<!-- DT:Rich -->
<p>neon is an HTTP and WebDAV client library with a C interface. Featuring:
neon is an HTTP and WebDAV client library with a C interface. Featuring:<ul>
<li>High-level interface to HTTP and WebDAV methods (PUT, GET, HEAD, etc.)
</li><li>Low-level interface to HTTP request handling to allow implementing
new methods easily
</li><li>HTTP/1.1 and HTTP/1.0 persistent connections
</li><li>RFC2617 basic and digest authentication (including auth-int, md5-sess)
</li><li>Proxy support (including basic/digest authentication)
</li><li>Generic WebDAV 207 XML response handling mechanism
</li><li>XML parsing using the expat or libxml parsers
</li><li>Easy generation of error messages from 207 error responses
</li><li>WebDAV resource manipulation: MOVE, COPY, DELETE, MKCOL
</li><li>WebDAV metadata support: set and remove properties, query any set of
properties (PROPPATCH/PROPFIND)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: net-snmp 5.4.2.1 8.2.1 src
=Sum: SNMP Daemon
+Des:
<!-- DT:Rich -->
<p>This package was originally based on the CMU 2.1.2.1 snmp code.
It has been greatly modified, restructured, enhanced, and fixed.
It hardly looks the same as anything that CMU has ever released.
It was renamed from cmu-snmp to ucd-snmp in 1995 and later renamed
from ucd-snmp to net-snmp in November 2000.
</p>
-Des:
##----------------------------------------
=Pkg: netpbm 10.26.44 101.9.1 src
=Sum: A Powerful Graphics Conversion Package
+Des:
<!-- DT:Rich -->
<p>The latest version of the Portable Bitmap Plus Utilities. This large
package, which is by now available for all hardware platforms,
provides tools for graphics conversion. Using these tools, images can
be converted from virtually any format into any other format.
A few of the supported formats include: GIF, PC-Paintbrush, IFF ILBM,
Gould Scanner file, MTV ray tracer, Atari Degas .pi1 and .pi3, Macintosh
PICT, HP Paintjet file, QRT raytracer, AUTOCAD slide, Atari Spectrum
(compressed and uncompressed), Andrew Toolkit raster object, and many
more. On top of that, man pages are included for all tools.
</p>
-Des:
##----------------------------------------
=Pkg: nfsidmap 0.20 1.20 src
=Sum: NFSv4 ID Mapping Library
+Des:
<!-- DT:Rich -->
<p>In NFSv4, identities of users are conveyed by names rather than user ID
and group ID. Both the NFS server and client code in the kernel need to
translate these to numeric IDs.
</p>
-Des:
##----------------------------------------
=Pkg: nss-shared-helper 1.0.6 1.6 src
=Sum: Helper functions for sharing NSS database
+Des:
<!-- DT:Rich -->
<p>This library provides helper functions for programs that want to share
an NSS crypto database.
</p>
-Des:
##----------------------------------------
=Pkg: numactl 2.0.3 0.4.3 src
=Sum: NUMA Policy Control
+Des:
<!-- DT:Rich -->
<p>Control NUMA policy for individual processes.
Offer libnuma for individual NUMA policy in applications.
</p>
-Des:
##----------------------------------------
=Pkg: ofed 1.4.2 0.9.6 src
=Sum: Infiniband Kernel Modules
+Des:
<!-- DT:Rich -->
<p>Ce paquet contient les modules noyau infiniband conçus par OpenFabrics Enterprise Distribution (OFED)
</p>
-Des:
##----------------------------------------
=Pkg: openbabel 2.2.0 4.21 src
=Sum: Open Babel - The Open Source Chemistry Toolbox
+Des:
<!-- DT:Rich -->
<p>Open Babel is a chemical toolbox designed to speak the many languages of chemical data. It&#39;s an open, collaborative project allowing anyone to search, convert, analyze, or store data from molecular modeling, chemistry, solid-state materials, biochemistry, or related areas.
</p>
-Des:
##----------------------------------------
=Pkg: opencdk 0.6.6 2.16 src
=Sum: Library Providing Basic Parts of the OpenPGP Message Format
+Des:
<!-- DT:Rich -->
<p>For reference, read RFC2440. Due to some possible security problems, the library also implements parts of draft-ietf-openpgp-rfc2440bis-06.txt.
</p><p>
The aim of the library is not to replace any available OpenPGP version. There is no real support for key management (sign, revoke, alter preferences, etc.) and some other parts are only rudimentarily available. The main purpose is to handle and understand OpenPGP packets and to use basic operations. For example, to encrypt and decrypt, sign and verify, and provide packet routines.
</p>
-Des:
##----------------------------------------
=Pkg: openclipart 0.18 136.22 src
=Sum: Open Clip Art Library
+Des:
<!-- DT:Rich -->
<p>An extensive set of clip art graphics that can be used for free.
</p>
-Des:
##----------------------------------------
=Pkg: openct 0.6.15 5.20 src
=Sum: OpenCT Tools for Smart Card Readers
+Des:
<!-- DT:Rich -->
<p>OpenCT is a set of library and tools to talk to smart card readers. OpenCT is used by the OpenSC Smart Card library.
</p><p>
For a list of supported readers, please read documentation in /usr/share/doc/packages/openct/wiki/index.html - some readers may be supported only with particular firmware or particular connection type.
</p><p>
There are other packages that may support your reader in a different way. Name of all these packages starts with &quot;pcsc-&quot;.
</p>
-Des:
##----------------------------------------
=Pkg: openldap2-client 2.4.20 0.4.29 src
=Sum: OpenLDAP Client Utilities
+Des:
<!-- DT:Rich -->
<p>This package contains the OpenLDAP client utilities.
</p>
-Des:
##----------------------------------------
=Pkg: opensc 0.11.6 5.25.1 src
=Sum: OpenSC Smart Card Library
+Des:
<!-- DT:Rich -->
<p>OpenSC provides a set of libraries and utilities to access smart cards. It mainly focuses on cards that support cryptographic operations. It facilitates their use in security applications such as mail encryption, authentication, and digital signature. OpenSC implements the PKCS#11 API. Applications supporting this API, such as Mozilla Firefox and Thunderbird, can use it. OpenSC implements the PKCS#15 standard and aims to be compatible with every software that does so, too.
</p><p>
Before purchasing any cards, please read carefully documentation in /usr/share/doc/packages/opensc/wiki/index.html - only some cards are supported. Not only card type matters, but also card version, card OS version and preloaded applet. Only subset of possible operations may be supported for your card. Card initialization may require third party proprietary software.
</p>
-Des:
##----------------------------------------
=Pkg: openslp 1.2.0 172.11.16 src
=Sum: An OpenSLP Implementation of Service Location Protocol V2
+Des:
<!-- DT:Rich -->
<p>Service Location Protocol is an IETF standards track protocol that
provides a framework that allows networking applications to discover the
existence, location, and configuration of networked services in
enterprise networks.
</p><p>
OpenSLP is an open source implementation of the SLPv2 protocol as defined
by RFC 2608 and RFC 2614.  This package includes the slptool and runtime
libraries.
</p>
-Des:
##----------------------------------------
=Pkg: openssl 0.9.8h 30.27.11 src
=Sum: Secure Sockets and Transport Layer Security
+Des:
<!-- DT:Rich -->
<p>The OpenSSL Project is a collaborative effort to develop a robust,
commercial-grade, full-featured, and open source toolkit implementing
the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS
v1) protocols with full-strength cryptography. The project
is managed by a worldwide community of volunteers that use the
Internet to communicate, plan, and develop the OpenSSL toolkit and its
related documentation.
</p><p>
</p><p>
Derivation and License
</p><p>
</p><p>
OpenSSL is based on the excellent SSLeay library developed by Eric
A. Young and Tim J. Hudson. The OpenSSL toolkit is licensed under an
Apache-style license, which basically means that you are free to get it
and to use it for commercial and noncommercial purposes.
</p>
-Des:
##----------------------------------------
=Pkg: openwsman 2.2.3 0.6.5 src
=Sum: Opensource Implementation of WS-Management
+Des:
<!-- DT:Rich -->
<p>Opensource Implementation of WS-Management
</p>
-Des:
##----------------------------------------
=Pkg: orbit2 2.14.17 2.7.8 src
=Sum: High-Performance CORBA Object Request Broker
+Des:
<!-- DT:Rich -->
<p>ORBit is a high-performance CORBA (Common Object Request Broker
Architecture) ORB (Object Request Broker). It allows programs to
send requests and receive replies from other programs, regardless
of the locations of the two programs. CORBA is an architecture that
enables communication between program objects, regardless of the
programming language they are written in or the operating system they
run on.
</p><p>
You will need to install this package if you want to run programs that use
the CORBA technology ORBit implementation.
</p>
-Des:
##----------------------------------------
=Pkg: pam 1.0.4 0.5.12 src
=Sum: A Security Tool that Provides Authentication for Applications
+Des:
<!-- DT:Rich -->
<p>PAM (Pluggable Authentication Modules) is a system security tool
that allows system administrators to set authentication policies
without having to recompile programs that do authentication.
</p>
-Des:
##----------------------------------------
=Pkg: pango 1.26.2 1.1.249 src
=Sum: System for Layout and Rendering of Internationalised Text
+Des:
<!-- DT:Rich -->
<p>Pango is a library for layout and rendering of text, with an emphasis on internationalisation. It forms the core of text and font handling in GTK+ 2.0.
</p>
-Des:
##----------------------------------------
=Pkg: pangomm 2.26.0 1.1.358 src
=Sum: C++ interface for pango
+Des:
<!-- DT:Rich -->
<p>pangomm provides a C++ interface to the pango library.
</p>
-Des:
##----------------------------------------
=Pkg: parted 1.8.8 102.21.8 src
=Sum: GNU partitioner
+Des:
<!-- DT:Rich -->
<p>GNU Parted is a program for creating, destroying, resizing, checking, and
copying partitions, and the file systems on them.
</p>
-Des:
##----------------------------------------
=Pkg: pciutils 3.0.1 2.18 src
=Sum: PCI-utilities for Kernel version 2.2 and newer
+Des:
<!-- DT:Rich -->
<p>lspci: This program displays detailed information about all PCI busses and devices
in the system, replacing the original /proc/pci interface.
</p><p>
setpci: This program allows reading from and writing to PCI device configuration
registers. For example, you can adjust the latency timers with it.
</p><p>
update-pciids: This program downloads the current version of the pci.ids file.
</p>
-Des:
##----------------------------------------
=Pkg: pcre 7.8 2.18 src
=Sum: A library for Perl-compatible regular expressions
+Des:
<!-- DT:Rich -->
<p>The PCRE library is a set of functions that implement regular
expression pattern matching using the same syntax and semantics
as Perl 5, with very few differences. The current
implementation corresponds to Perl 5.005.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-acr38 1.7.9 137.24 src
=Sum: PC/SC IFD Handler for the ACR38 Smart Card Reader
+Des:
<!-- DT:Rich -->
<p>This package contains a driver for the ACR 38 smart card reader produced by ACS.
</p><p>
This driver is meant to be used with the PCSC-Lite daemon from the pcsc-lite package.
</p>
-Des:
##----------------------------------------
=Pkg: pcsc-lite 1.4.102 1.24 src
=Sum: PCS Smart Cards Library
+Des:
<!-- DT:Rich -->
<p>The purpose of PCSC Lite is to provide a Windows(R) SCard interface in a very small form factor for communication with smart cards and readers.
PCSC Lite can be compiled directly for a desired reader driver or can be
used to dynamically allocate/deallocate reader drivers at runtime (the default behavior).
</p><p>
PCSC Lite uses the same winscard API as used in Windows(R).
</p><p>
Security aware people should read the SECURITY file for possible vulnerabilities of pcsclite and how to fix them.
For information on how to install drivers please read the DRIVERS file.
</p><p>
Memory cards will be supported through the MCT specification, which is an APDU like manner sent normally through the SCardTransmit() function.
This functionality is exercised in the driver.
</p>
-Des:
##----------------------------------------
=Pkg: perl 5.10.0 64.47.8 src
=Sum: The Perl interpreter
+Des:
<!-- DT:Rich -->
<p>perl - Practical Extraction and Report Language
</p><p>
Perl is optimized for scanning arbitrary text
files, extracting information from those text files, and
printing reports based on that information.  It is also
good for many system management tasks.
Perl is intended to be practical (easy to use,
efficient, and complete) rather than beautiful (tiny, elegant,
and minimal).
</p><p>
Some of the modules available on CPAN can be found in the &quot;perl&quot; series.
</p>
-Des:
##----------------------------------------
=Pkg: perl-Tk 804.028 50.24 src
=Sum: Perl Tk
+Des:
<!-- DT:Rich -->
<p>Perl Tk is an enhancement for Perl. It combines the well structured
graphical library Tk with the powerful scripting language Perl.
</p>
-Des:
##----------------------------------------
=Pkg: perl-ldap 0.37 1.19.3 src
=Sum: Client Interface for LDAP Servers
+Des:
<!-- DT:Rich -->
<p>A Client interface for LDAP servers.
</p>
-Des:
##----------------------------------------
=Pkg: phonon 4.3.1 3.3.10 src
=Sum: Phonon Multimedia Platform Abstraction
+Des:
<!-- DT:Rich -->
<p>Phonon is a cross-platform portable Multimedia Support Abstraction, which allows you to play multiple audio or video formats with the same quality on all platforms, no matter which underlying architecture is used.
</p>
-Des:
##----------------------------------------
=Pkg: pixman 0.16.0 1.2.22 src
=Sum: Pixel manipulation library
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>Pixman is a pixel manipulation library for X and cairo.
</p>
-Des:
##----------------------------------------
=Pkg: pkcs11-helper 1.06 1.15 src
=Sum: Helper Library for the Use with Smart Cards and the PKCS#11 API
+Des:
<!-- DT:Rich -->
<p>pkcs11-helper allows using multiple PKCS#11 providers at the same time and selecting keys by id, label or certificate subject.
Besides it covers the following topics:<ul>
<li>Handling card removal and card insert events
</li><li>Handling card re-insert to a different slot
</li><li>Supporting session expiration serialization
</li><li>and much more
All this is possible using a simple API.
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: polkit-qt 0.9.2 3.1.92 src
=Sum: PolicyKit Library Qt Bindings
+Des:
<!-- DT:Rich -->
<p>Polkit-qt aims to make it easy for Qt developers to take advantage of PolicyKit API. It is a convenience wrapper around QAction and QAbstractButton that lets you integrate those two components easily with PolicyKit.
</p>
-Des:
##----------------------------------------
=Pkg: poppler 0.12.3 1.2.44 src
=Sum: PDF Rendering Library
+Des:
<!-- DT:Rich -->
<p>Poppler is a fork of the xpdf PDF viewer developed by Derek Noonburg of Glyph and Cog, LLC.
There are two reasons for forking xpdf.
First, to provide PDF rendering functionality as a shared library to centralize the maintenence effort. Today a number of
applications incorporate the xpdf code base and whenever a security
issue is discovered, all these applications exchange patches and put
out new releases. In turn, all distributions must package and release
new versions of these xpdf based viewers. Due to this, there is a lot of duplicated effort.
Even if poppler in the short term introduces yet another xpdf-derived code
base to the world, hopefully, over time these applications will
adopt poppler. After all, only one application needs to use poppler to break even.
</p><p>
Second, libpoppler intends to move forward in a number of areas
that do not fit within the goals of xpdf.  By design, xpdf depends on
very few libraries and runs on a wide range of X-based platforms.  This
is a strong feature and reasonable design goal.  However, poppler
intends to replace parts of xpdf that are now available as
standard components of modern Unix desktop environments.  One such
example is fontconfig, which solves the problem of matching and
locating fonts on the system in a standardized and well understood
way.  Another example is cairo, which provides high quality 2D
rendering.  See the file TODO for a list of planned changes.
</p>
-Des:
##----------------------------------------
=Pkg: postfix 2.5.6 5.4.21 src
=Sum: A fast, secure, and flexible mailer
+Des:
<!-- DT:Rich -->
<p>Postfix aims to be an alternative to the widely-used sendmail program.
</p>
-Des:
##----------------------------------------
=Pkg: postgresql 8.3.9 0.1.1 src
=Sum: Basic Clients and Utilities for PostgreSQL
+Des:
<!-- DT:Rich -->
<p>PostgreSQL is an advanced object-relational database management system
that supports an extended subset of the SQL standard, including
transactions, foreign keys, subqueries, triggers, and user-defined types
and functions.
</p><p>
This package contains the basic utility and client programs necessary to maintain and work with local or remote PostgreSQL databases as well as manual pages for the SQL commands that PostgreSQL supports. Full HTML documentation for PostgreSQL can be found in the postgresql-docs package.
</p>
-Des:
##----------------------------------------
=Pkg: ppl 0.10.2 4.1.51 src
=Sum: The Parma Polyhedra Library
+Des:
<!-- DT:Rich -->
<p>The Parma Polyhedra Library (PPL) is a library for the manipulation of
(not necessarily closed) convex polyhedra and other numerical
abstractions.  The applications of convex polyhedra include program
analysis, optimized compilation, integer and combinatorial
optimization and statistical data-editing.  The Parma Polyhedra
Library comes with several user friendly interfaces, is fully dynamic
(available virtual memory is the only limitation to the dimension of
anything), written in accordance to all the applicable standards,
exception-safe, rather efficient, thoroughly documented, and free
software.  This package provides all what is necessary to run
applications using the PPL through its C and C++ interfaces.
</p>
-Des:
##----------------------------------------
=Pkg: ppp 2.4.5.git 2.23.10 src
=Sum: The Point to Point Protocol for Linux
+Des:
<!-- DT:Rich -->
<p>The ppp package contains the PPP (Point-to-Point Protocol) daemon,
pppd, additional PPP utilities, documentation, and sample files.
PPP provides a method for transmitting IP and IPX datagrams over
serial point-to-point links, for example over a modem.
The PPP daemon handles the details of setting up a PPP link including
configuring the network interface and performing the PPP negotiations.
</p>
-Des:
##----------------------------------------
=Pkg: pth 2.0.7 102.22 src
=Sum: GNU Portable Threads
+Des:
<!-- DT:Rich -->
<p>Pth is a very portable POSIX/ANSI-C based library for Unix platforms
which provides non-preemptive priority-based scheduling for multiple
threads of execution (&quot;multithreading&quot;) inside server applications.
All threads run in the same address space of the server application,
but each thread has it&#39;s own individual program-counter, run-time
stack, signal mask and errno variable.
</p>
-Des:
##----------------------------------------
=Pkg: pulseaudio 0.9.21 1.5.26 src
=Sum: A Networked Sound Server
+Des:
<!-- DT:Rich -->
<p>pulseaudio is a networked sound server for Linux and other Unix like
operating systems and Microsoft Windows. It is intended to be an
improved drop-in replacement for the Enlightened Sound Daemon
(ESOUND).
</p>
-Des:
##----------------------------------------
=Pkg: python 2.6.0 8.9.28 src
=Sum: Python Interpreter
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
If you want to install third party modules using distutils, you need to install <a href="pkg://python-devel">python-devel</a> package.
</p>
-Des:
##----------------------------------------
=Pkg: python-base 2.6.0 8.9.20 src
=Sum: Python Interpreter base package
+Des:
<!-- DT:Rich -->
<p>Python is an interpreted, object-oriented programming language, and is
often compared to Tcl, Perl, Scheme, or Java.  You can find an overview of Python
in the documentation and tutorials included in the <a href="pkg://python-doc">python-doc</a> (HTML) or
<a href="pkg://python-doc-pdf">python-doc-pdf</a> (PDF) packages.
</p><p>
This package contains all of stand-alone Python files, minus binary modules that would pull in extra dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: python-cairo 1.6.4 1.26 src
=Sum: Python Bindings for Cairo
+Des:
<!-- DT:Rich -->
<p>Python bindings for cairo.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome 2.22.0 67.32 src
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>PyGNOME is an extension module for python that gives you access to the
GNOME libraries.  This means you have access to more widgets, simple
configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gnome-extras 2.19.1 145.31 src
=Sum: Python bindings for GNOME
+Des:
<!-- DT:Rich -->
<p>GNOME-python-extras is an extension module for python that gives you access to more GNOME libraries.  This means you have access to more widgets, simple configuration interface, metadata support and many other features.
</p>
-Des:
##----------------------------------------
=Pkg: python-gobject2 2.20.0 1.1.56 src
=Sum: Python bindings for GObject
+Des:
<!-- DT:Rich -->
<p>Pygobjects is an extension module for python that gives you access to GLib&#39;s
GObjects.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtk 2.16.0 1.1.251 src
=Sum: Python bindings for the GTK+ widget set
+Des:
<!-- DT:Rich -->
<p>PyGTK is an extension module for python that gives you access to the GTK+
widget set.  Just about anything you can write in C with GTK+ you can write
in python with PyGTK (within reason), but with all of python&#39;s benefits.
</p>
-Des:
##----------------------------------------
=Pkg: python-gtksourceview 2.4.0 1.32 src
=Sum: Python bindings for the GTK+ source editing widget
+Des:
<!-- DT:Rich -->
<p>GtkSourceView is a text widget that extends GtkTextView, the standard
GTK+ 2.x text widget.
</p><p>
It improves GtkTextView by implementing syntax highlighting and other
features typical of a source editor.
</p><p>
This package contains Python bindings for the library.
</p>
-Des:
##----------------------------------------
=Pkg: python-orbit 2.14.3 137.26 src
=Sum: Python bindings for ORBit
+Des:
<!-- DT:Rich -->
<p>Python bindings for ORBit. ORBit is the CORBA Object Request Broker used e.g. by GNOME.
</p>
-Des:
##----------------------------------------
=Pkg: python-qt4 4.6.2 0.1.87 src
=Sum: PyQt - python bindings for Qt 4
+Des:
<!-- DT:Rich -->
<p>PyQt is a set of Python bindings for Trolltech&#39;s Qt application framework and runs on all platforms supported by Qt including Windows, MacOS/X and Linux. There are two sets of bindings: PyQt v4 supports Qt v4; and the older PyQt v3 supports Qt v3 and earlier. The bindings are implemented as a set of Python modules and contain over 300 classes and nearly 6,000 functions and methods.
</p>
-Des:
##----------------------------------------
=Pkg: python-sip 4.9.2 0.1.59 src
=Sum: SIP tool to create python bindings
+Des:
<!-- DT:Rich -->
<p>SIP is a tool that makes it very easy to create Python bindings for C and C++ libraries. It was originally developed to create PyQt, the Python bindings for the Qt toolkit, but can be used to create bindings for any C or C++ library.
</p>
-Des:
##----------------------------------------
=Pkg: qscintilla 2.3.2 1.24 src
=Sum: C++ Editor Class Library
+Des:
<!-- DT:Rich -->
<p>QScintilla is a Qt port of Neil Hodgson&#39;s Scintilla C++ editor class.
</p><p>
This is a Qt port from the original Scintilla class (http://www.scintilla.org/).
</p><p>
This package is mainly used by eric, the Python IDE.
</p>
-Des:
##----------------------------------------
=Pkg: qt3 3.3.8b 88.21 src
=Sum: A library for developing applications with graphical user interfaces
+Des:
<!-- DT:Rich -->
<p>Qt is a program library for developing applications with graphical
user interfaces. It allows you to rapidly develop professional programs.
The Qt library is available not only for Linux but for a great number
of Unices and even for Windows. Thus it is possible to write
programs that may be easily ported to those platforms.
</p><p>
You need a license for using Qt with a non-GPL application, which can be acquired from sales@trolltech.com.
</p><p>
See /usr/share/doc/packages/qt3 for details about the new features
of the current Qt library!
</p>
-Des:
##----------------------------------------
=Pkg: qt3-extensions 3.3.8b 88.21 src
=Sum: Extensions Qt3
+Des:
<!-- DT:Rich -->
<p>This package contains extension libraries for Qt 3, such as the Netscape plug-in
modules.
</p>
-Des:
##----------------------------------------
=Pkg: rarian 0.8.1 5.16 src
=Sum: Rarian is designed to be a replacement for scrollkeeper
+Des:
<!-- DT:Rich -->
<p>Rarian is designed to be a replacement for scrollkeeper.  It is
currently undergoing heavy development.  As of writing, rarian can be
installed in place of scrollkeeper and everything will work okay (as
far as my testing indicates)
</p>
-Des:
##----------------------------------------
=Pkg: rasqal 0.9.16 1.21 src
=Sum: Rasqal RDF Parser Toolkit for Redland
+Des:
<!-- DT:Rich -->
<p>Rasqal is a library providing full support for querying Resource
Description Framework (RDF) including parsing query syntaxes, constructing
the queries, executing them and returning result formats.  It currently
handles the RDF Data Query Language (RDQL) and SPARQL Query language.
</p>
-Des:
##----------------------------------------
=Pkg: razor-agents 2.84 1.14 src
=Sum: SPAM catalogue inquiry and update tool
+Des:
<!-- DT:Rich -->
<p>Vipul&#39;s Razor is a distributed, collaborative, spam detection and filtering
network. Razor establishes a distributed and constantly updating catalogue of
spam in propagation. This catalogue is used by clients to filter out known
spam. On receiving a spam, a Razor Reporting Agent (run by an end-user or a
troll box) calculates and submits a 20-character unique identification of the
spam (a SHA Digest) to its closest Razor Catalogue Server. The Catalogue
Server echos this signature to other trusted servers after storing it in its
database. Prior to manual processing or transport-level reception, Razor
Filtering Agents (end-users and MTAs) check their incoming mail against a
Catalogue Server and filter out or deny transport in case of a signature
match. Catalogued spam, once identified and reported by a Reporting Agent,
can be blocked out by the rest of the Filtering Agents on the network.
</p><p>
Can be used as one of the spamassassin rules.
</p>
-Des:
##----------------------------------------
=Pkg: recode 3.6 635.18 src
=Sum: Character Set Converter
+Des:
<!-- DT:Rich -->
<p>This package converts various character sets.
</p>
-Des:
##----------------------------------------
=Pkg: redland 1.0.8 1.21 src
=Sum: a set of free software libraries that provide support for the Resource Description Framework (RDF)
+Des:
<!-- DT:Rich -->
<p>Redland is a library that provides a high-level interface for RDF
(Resource Description Framework) implemented in an object-based API.
It is modular and supports different RDF parsers, serializers,
storage and query languages.  Redland is designed for developers to
provide RDF support in their applications as well as a core library
for RDF developers to start with.
</p>
-Des:
##----------------------------------------
=Pkg: rpm 4.4.2.3 37.16.37 src
=Sum: The RPM Package Manager
+Des:
<!-- DT:Rich -->
<p>RPM Package Manager is the main tool for managing the software packages
of the SuSE Linux distribution.
</p><p>
RPM can be used to install and remove software packages. With rpm, it is easy
to update packages.  RPM keeps track of all these manipulations in a central
database.  This way it is possible to get an overview of all installed
packages.  RPM also supports database queries.
</p>
-Des:
##----------------------------------------
=Pkg: rrdtool 1.3.4 2.8 src
=Sum: A tool for data logging and analysis
+Des:
<!-- DT:Rich -->
<p>A tool to log and analyze data gathered from
all kinds of data sources. The data analysis
part of RRDtool is based on the ability to quickly
generate graphical representations of the data values
collected over a definable time period.
</p>
-Des:
##----------------------------------------
=Pkg: ruby 1.8.7.p72 5.24.2 src
=Sum: An Interpreted Object-Oriented Scripting Language
+Des:
<!-- DT:Rich -->
<p>Ruby is an interpreted scripting language for quick and
easy object-oriented programming.  It has many features for
processing text files and performing system management tasks (as in
Perl).  It is simple, straight-forward, and extensible.
<ul>
<li>Ruby features:

</li><li>Simple Syntax
</li><li>*Normal* Object-Oriented features (class, method calls, for example)
</li><li>*Advanced* Object-Oriented features(Mix-in, Singleton-method, for example)
</li><li>Operator Overloading
</li><li>Exception Handling
</li><li>Iterators and Closures
</li><li>Garbage Collection
</li><li>Dynamic Loading of Object Files (on some architectures)
</li><li>Highly Portable (works on many UNIX machines; DOS, Windows, Mac, BeOS, and more)
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: samba 3.4.3 1.17.2 src
=Sum: A SMB/CIFS File, Print, and Authentication Server
+Des:
<!-- DT:Rich -->
<p>Samba is a suite of programs that allows SMB/CIFS clients to use the Unix file space, printers, and authentication subsystem.
</p><p>
The package named samba contains all programs that are needed to act as a server.  The binaries expect the configuration file to be found in /etc/samba/smb.conf
</p><p>
For a more detailed description of Samba, check the samba-doc package or the Samba.org Web page at http://www.Samba.org/
</p><p>
Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>Please check http://en.openSUSE.org/Samba for general information on Samba as part of SUSE Linux Enterprise or openSUSE products, links to binary packages of the most current Samba version, and a bug reporting how to.
</p>
-Ins:
##----------------------------------------
=Pkg: sane-backends 1.0.20 7.1.115 src
=Sum: SANE (Scanner Access Now Easy) Scanner Drivers
+Des:
<!-- DT:Rich -->
<p>The software consists of SANE scanner drivers, &quot;scanimage,&quot;
and the &quot;saned&quot; daemon.
</p><p>
A SANE scanner driver is used via a SANE front-end. This package contains the command line front-end &quot;scanimage&quot;. There are various graphical front-ends like &quot;xscanimage&quot; (package sane-frontends), XSane (package xsane), and the KDE front-end Kooka (package kdegraphics3-scan).
</p><p>
The &quot;saned&quot; daemon provides the service &quot;sane-port&quot; to access scanners that are connected to a server via network from client hosts that run the &quot;net&quot; meta driver.
</p>
-Des:
##----------------------------------------
=Pkg: sax2 8.1 561.27.3 src
=Sum: SuSE advanced X Window System-configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the SuSE Advanced X-Configuration
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-base 1.6.0 0.1.87 src
=Sum: SBLIM Base Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation Base Providers
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpi-network 1.4.0 1.1.74 src
=Sum: SBLIM Network Instrumentation
+Des:
<!-- DT:Rich -->
<p>Standards Based Linux Instrumentation Network Providers.
The Network Instrumentation allows you to get information about the
network configuration of a system via CIMOM technology/infrastructure.
</p>
-Des:
##----------------------------------------
=Pkg: sblim-cmpiutil 1.0.1 2.15 src
=Sum: utility library for cmpi development
+Des:
<!-- DT:Rich -->
<p>A set of utility functions that make cmpi provider development easier
</p>
-Des:
##----------------------------------------
=Pkg: sblim-indication_helper 0.4.2 129.17 src
=Sum: Toolkit for CMPI Indication Providers
+Des:
<!-- DT:Rich -->
<p>This package contains a developer library for helping out when writing CMPI providers.
This library polls the registered functions for data and, if it changes, a CMPI indication is set with the values of the indication class properties (also set by the developer).
</p>
-Des:
##----------------------------------------
=Pkg: sblim-sfcc 2.2.1 0.4.6 src
=Sum: Small Footprint CIM Client Library
+Des:
<!-- DT:Rich -->
<p>Small Footprint CIM Client Library (sfcc) Runtime Libraries
</p>
-Des:
##----------------------------------------
=Pkg: sblim-tools-libra 0.5.5 4.22 src
=Sum: SBLIM Common Resource Access Library for WBEM-SMT tasks
+Des:
<!-- DT:Rich -->
<p>The tools-libra package provides common functionality required by
the task-specific resource access layers of wbem-smt tasks such as
cmpi-dns and cmpi-samba.
</p>
-Des:
##----------------------------------------
=Pkg: schroedinger 1.0.5 2.36 src
=Sum: Library for decoding and encoding video in the Dirac format
+Des:
<!-- DT:Rich -->
<p>The Schroedinger project implements portable libraries for the high quality
Dirac video codec created by BBC Research and Development. Dirac is a free
and open source codec producing very high image quality video. The project
produces two libraries in ANSI C89, one for decoding and one for encoding.
</p>
-Des:
##----------------------------------------
=Pkg: scim 1.4.7 166.32.117 src
=Sum: Smart Chinese/Common Input Method platform
+Des:
<!-- DT:Rich -->
<p>SCIM is a developing platform to significantly reduce the difficulty of
input method development.
</p>
-Des:
##----------------------------------------
=Pkg: scim-bridge 0.4.15 6.22 src
=Sum: Scim Bridge
+Des:
<!-- DT:Rich -->
<p>Scim Bridge
</p>
-Des:
##----------------------------------------
=Pkg: scim-pinyin 0.5.91.20060705 160.33 src
=Sum: Intelligent Pinyin input module for Smart Chinese/Common Input Method platform
+Des:
<!-- DT:Rich -->
<p>Intelligent Pinyin input module for Smart Chinese/Common Input Method platform
</p>
-Des:
##----------------------------------------
=Pkg: scim-qtimm 0.9.4 270.29 src
=Sum: Qt input module plugin for SCIM
+Des:
<!-- DT:Rich -->
<p>Qt input module plugin for SCIM
</p>
-Des:
##----------------------------------------
=Pkg: scim-tables 0.5.8 1.33 src
=Sum: Data Files for SCIM Generic Table Input Method Module
+Des:
<!-- DT:Rich -->
<p>Data files for SCIM generic table input method module.
</p>
-Des:
##----------------------------------------
=Pkg: scpm 1.1.7 1.19 src
=Sum: System Configuration Profile Management
+Des:
<!-- DT:Rich -->
<p>SCPM enables your system to save different configurations in
profiles. You can boot directly into a profile as well as
switch profiles at run time. It is the successor of scheme
management.
</p>
-Des:
##----------------------------------------
=Pkg: seed 2.28.1 0.1.70 src
=Sum: JavaScript bindings based on gobject-introspection and WebKit
+Des:
<!-- DT:Rich -->
<p>Seed is a library and interpreter, dynamically bridging (through
gobject-introspection) the WebKit JavaScriptCore engine with the GObject type
system. In a more concrete sense, Seed enables you to immediately write
applications around a significant portion of the GNOME platform, and easily
embed JavaScript as a scripting language in your GObject library.
</p>
-Des:
##----------------------------------------
=Pkg: sensors 3.0.3 4.14.11 src
=Sum: Hardware health monitoring for Linux
+Des:
<!-- DT:Rich -->
<p>This package includes programs that show data from some sensor chips.  The
interface /proc/bus/i2c/ is provided by loading kernel modules. Which modules to
load can be interactively detected as root by calling /usr/sbin/sensors-detect.
Warning, before using the sensors the default configuration in /etc/sensors.conf
has to be checked and changed to fit the actual set up of the mainboard and
the BIOS used on that specific mainboard!
</p>
-Des:
##----------------------------------------
=Pkg: sg3_utils 1.28 0.3.5 src
=Sum: A collection of tools that send SCSI commands to devices
+Des:
<!-- DT:Rich -->
<p>The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets. ATAPI cd/dvd drives and SATA disks that connect via a translation layer or a bridge device are examples of devices that use SCSI command sets.
</p>
-Des:
##----------------------------------------
=Pkg: slang 2.1.1 58.18 src
=Sum: A Library for Display Control
+Des:
<!-- DT:Rich -->
<p>A library with routines for display access. It is similar to ncurses, but
it has its own programming interface. Slang uses the entries in
/usr/lib/terminfo.
</p>
-Des:
##----------------------------------------
=Pkg: soprano 2.3.0 4.1.92 src
=Sum: C++/Qt based interface library for RDF
+Des:
<!-- DT:Rich -->
<p>Soprano is an open and pluggable RDF resource framework which is build on top of QT4. It provides RDF storage, RDF parsing, serialization, inference, and full text indexing in a nice C++ API.
The main target of Soprano are desktop applications as it is being developed as a subroject of Nepomuk, the semantic desktop initiative.
</p>
-Des:
##----------------------------------------
=Pkg: speex 1.1.99.91 2.12 src
=Sum: An Open Source, Patent Free Speech Codec
+Des:
<!-- DT:Rich -->
<p>Speex is a patent free audio codec designed especially for voice
(unlike Vorbis which targets general audio) signals and providing
good narrowband and wideband quality. This project aims to be
complementary to the Vorbis codec.
</p>
-Des:
##----------------------------------------
=Pkg: splashy 0.3.8 106.21 src
=Sum: A complete user-space boot splash system
+Des:
<!-- DT:Rich -->
<p>Splashy is a next generation boot splashing system for Linux systems. Unlike other splashing systems, it needs no patches to the kernel and its installed like a normal package. Make your boot process eye-candy with Splashy!
</p><p>
Some of Splashys most noticeable features include:
<ul>
<li>Require zero kernel patches/full functionality in user-space
</li><li>Boot/halt/reboot/runlevel-switch support
</li><li>Progressbar support (with optional border)
</li><li>Verbose mode (with F2/ESC keys)
</li><li>Configuration file in XML
</li><li>Cope with any video-mode resolution/size
</li><li>Cope with 8, 16, and 24 bit framebuffers
</li><li>Alpha channel (transparency) support
</li><li>Video mode detection
</li><li>Initramfs support
</li><li>TrueType2 fonts support
</li><li>Lots of image/animation file formats supported: jpg, png, gif, mpg, swf
</li><li>Low dependencies and code in C to best perform
</li><li>Full LSB support
</li><li>Multiple themes support
</li><li>Really easy to create new themes
</li><li>X detection on exit
</li><li>Smooth progressbar movement
</li><li>Animations support
</li><li>Fade in/out effects
</li><li>Totally configurable
</li></ul></p>
-Des:
##----------------------------------------
=Pkg: sqlite3 3.6.4 2.8 src
=Sum: Embeddable SQL Database Engine
+Des:
<!-- DT:Rich -->
<p>SQLite is a C library that implements an embeddable SQL database engine. Programs that link with the SQLite library can have SQL database access without running a separate RDBMS process.
</p><p>
SQLite is not a client library used to connect to a big database server. SQLite is a server and the SQLite library reads and writes directly to and from the database files on disk.
</p><p>
SQLite can be used via the sqlite command line tool or via any application that supports the Qt database plug-ins.
</p>
-Des:
##----------------------------------------
=Pkg: startup-notification 0.9 60.13 src
=Sum: Reference Implementation for the Startup-Notification Protocol
+Des:
<!-- DT:Rich -->
<p>Startup-notification contains a reference implementation of the startup-notification protocol.
</p>
-Des:
##----------------------------------------
=Pkg: susehelp 2007.08.22 80.18 src
=Sum: SuSE Help-System (base)
+Des:
<!-- DT:Rich -->
<p>This package contains the basics of the SuSE Help System.
</p><p>
The SuSE Help System centralizes all Linux documentation in a clear,
structured manner with convenient search capabilities.
For quick start, click on the lifesaver in the desktop panel. For configuration, use
the KDE Control Center.
</p><p>
For more information, have a look at /usr/share/doc/packages/susehelp/README.
</p>
-Des:
##----------------------------------------
=Pkg: t1lib 5.1.1 100.17 src
=Sum: Adobe Type 1 Font Rasterizing Library
+Des:
<!-- DT:Rich -->
<p>T1lib is a library for generating character and string glyphs from
Adobe Type 1 fonts under UNIX. T1lib uses most of the code of the X Window System
rasterizer donated by IBM to the X Window System project. Some disadvantages
of the rasterizer included in the X Window System have been eliminated.
</p>
-Des:
##----------------------------------------
=Pkg: taglib 1.5 19.21 src
=Sum: C++ Library to Parse Metadata in Media Files
+Des:
<!-- DT:Rich -->
<p>libtag provides a C++ interface for reading additional data (stored in TAGs) from MP3, Ogg Vorbis, and MPEG files.
</p>
-Des:
##----------------------------------------
=Pkg: tcl 8.5.5 2.81 src
=Sum: The Tcl Programming Language
+Des:
<!-- DT:Rich -->
<p>Tcl (Tool Command Language) is a very powerful but easy to learn dynamic programming language, suitable for a very wide range of uses, including web and desktop applications, networking, administration, testing and many more. Open source and business-friendly, Tcl is a mature yet evolving language that is truly cross platform, easily deployed and highly extensible.
</p><p>
For more information on Tcl see http://www.tcl.tk and http://wiki.tcl.tk .
</p>
-Des:
##----------------------------------------
=Pkg: tcpd 7.6 856.13 src
=Sum: A security wrapper for TCP daemons
+Des:
<!-- DT:Rich -->
<p>This package contains a small daemon program that can
monitor and filter incoming requests for finger, ftp, telnet,
rlogin, rsh, exec, tftp, talk, and other network services.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-farsight 0.0.11 1.1.155 src
=Sum: Telepathy media streaming framework
+Des:
<!-- DT:Rich -->
<p>Telepathy Farsight is a Telepathy client that uses Farsight2 and GStreamer to handle media streaming channels. It&#39;s used as a background process by other Telepathy clients, rather than presenting any user interface of its own.
</p>
-Des:
##----------------------------------------
=Pkg: telepathy-glib 0.8.0 1.1.67 src
=Sum: Libraries for adding telepathy support to applications that use glib
+Des:
<!-- DT:Rich -->
<p>This package contains the libraries that make it easier to use some
telepathy functionality from applications that use glib.
</p>
-Des:
##----------------------------------------
=Pkg: telnet 1.2 134.22 src
=Sum: A client program for the telnet remote login protocol
+Des:
<!-- DT:Rich -->
<p>Telnet is an old protocol for logging into remote systems.  It is
rarely used, since the transfer is not encrypted (ssh is mostly
used these days).  The telnet client is often used for debugging
other network services. The command
</p><p>
telnet localhost 25
</p><p>
connects to the local smtp server, for example.
</p>
-Des:
##----------------------------------------
=Pkg: tiff 3.8.2 141.8.1 src
=Sum: Tools for Converting from and to the Tiff  Format
+Des:
<!-- DT:Rich -->
<p>This package contains the library and support programs for the TIFF image format.
</p>
-Des:
##----------------------------------------
=Pkg: tk 8.5.5 3.12 src
=Sum: Graphical User Interface Toolkit for Tcl
+Des:
<!-- DT:Rich -->
<p>Tk is a graphical user interface toolkit that takes developing desktop applications to a higher level than conventional approaches. Tk is the standard GUI not only for Tcl, but for many other dynamic languages, and can produce rich, native applications that run unchanged across Windows, Mac OS X, Linux and more.
</p>
-Des:
##----------------------------------------
=Pkg: totem-pl-parser 2.28.1 1.2.109 src
=Sum: A simple GObject-based library to parse playlist formats
+Des:
<!-- DT:Rich -->
<p>totem-pl-parser is a simple GObject-based library to parse a host of
playlist formats, to save them too.
</p>
-Des:
##----------------------------------------
=Pkg: trousers 0.3.1 6.26 src
=Sum: TSS (TCG Software Stack) access daemon for a TPM chip
+Des:
<!-- DT:Rich -->
<p>The trousers package provides a TSS implementation through the help of a user-space daemon, the tcsd, and a library  Trousers aims to be compliant to the 1.1b and 1.2 TSS specifications as available from the Trusted Computing website http://www.trustedcomputinggroup.org/.
</p><p>
The package needs the /dev/tpm device file to be present on your system. It is a character device file major 10 minor 224, 0600 tss:tss.
</p>
-Des:
##----------------------------------------
=Pkg: udev 128 13.10.1 src
=Sum: A Rule-Based Device Node and Kernel Event Manager
+Des:
<!-- DT:Rich -->
<p>udev&#39;s main task is to create and remove device nodes in /dev when a device is discovered or removed from the system. udevd receives all hotplug events via kernel netlink messages and dispatches them according to rules in /lib/udev/rules.d/. Matching rules may name a device node, create additional symlinks to the node, call tools to initialize a device, or load needed kernel modules.
</p>
-Des:
##----------------------------------------
=Pkg: unixODBC 2.2.12 198.17 src
=Sum: ODBC driver manager with some drivers included
+Des:
<!-- DT:Rich -->
<p>UnixODBC aims to provide a complete ODBC solution for the Linux
platform. Further drivers can be found at http://www.unixodbc.org/.
</p>
-Des:
##----------------------------------------
=Pkg: usbip 0.1.6 2.17 src
=Sum: The USB/IP shared USB system over IP network
+Des:
<!-- DT:Rich -->
<p>The USB/IP Project aims to develop a general USB device sharing system over IP network.
To share USB devices between computers with their full functionality, USB/IP encapsulates &quot;USB I/O messages&quot; into IP packets and transmits them between computers.
Original USB device drivers and applications can be also used for remote USB devices without any modification of them. A computer can use remote USB devices as if they were directly attached; for example, we can ...
</p>
-Des:
##----------------------------------------
=Pkg: util-linux 2.16 6.8.2 src
=Sum: A collection of basic system utilities
+Des:
<!-- DT:Rich -->
<p>This package contains a large variety of low-level system utilities that
are necessary for a Linux system to function. It contains the mount
program, the fdisk configuration tool, and more.
</p>
-Des:
##----------------------------------------
=Pkg: vhostmd 0.4 0.5.36 src
=Sum: Virtual Host Metrics Daemon (vhostmd)
+Des:
<!-- DT:Rich -->
<p>vhostmd provides a &quot;metrics communication channel&quot; between a host and its hosted virtual machines, allowing limited introspection of host resource usage from within virtual machines
</p>
-Des:
##----------------------------------------
=Pkg: vte 0.22.5 0.1.147 src
=Sum: Émulateur de terminal
+Des:
<!-- DT:Rich -->
<p>VTE est une bibliothèque qui fournit un widget GTK+ 2 émulant un terminal. Elle permet la gestion des processus enfants ainsi que la configuration d&#39;un terminal.
</p>
-Des:
##----------------------------------------
=Pkg: wbxml2 0.9.2_SVN59 11.18 src
=Sum: WBXML parser and compiler library
+Des:
<!-- DT:Rich -->
<p>wbxml2 is a library that includes a WBXML parser and a WBXML compiler.
Unlike wbxml, it does not depend on libxml2 but on expat, making it faster and more portable.
WBXML Library contains a library and its associated tools to Parse, Encode and Handle WBXML documents. The WBXML (Wireless Binary XML) format is a binary representation of XML, and it has been defined by the Wap Forum.
</p>
-Des:
##----------------------------------------
=Pkg: wodim 1.1.8 3.25 src
=Sum: Tool for Writing CDRs
+Des:
<!-- DT:Rich -->
<p>wodim is used to record data or audio CDs on a
CD-Recorder or to write DVD media on a DVD-Recorder.
</p>
-Des:
##----------------------------------------
=Pkg: wordcut 0.5.1b2 113.17 src
=Sum: Thai word segmentation utility.
+Des:
<!-- DT:Rich -->
<p>Thai word segmentation utility.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK 2.8.8.1 1.36 src
=Sum: C++ Framework for Cross-Platform Development
+Des:
<!-- DT:Rich -->
<p>wxWidgets is a free C++ framework to make cross-platform programming easy.
It supports Windows 3.1/95/98/NT, and Unix with
GTK/Motif/Lesstif. This is the version for GTK+. This package only
contains the runtime libraries and other data needed by the runtime
libraries.
</p><p>
Additional documentation is available in the package wxGTK-doc
and you can find some examples in the package wxGTK-examples.
</p>
-Des:
##----------------------------------------
=Pkg: wxGTK-doc 2.8.8.1 1.17 src
=Sum: wxGTK Documentation
+Des:
<!-- DT:Rich -->
<p>This package contains <a href="pkg://wxGTK">wxGTK</a> documentation in HTML and PDF formats.
</p>
-Des:
##----------------------------------------
=Pkg: xalan-j2 2.7.0 217.24 src
=Sum: Java XSLT processor
+Des:
<!-- DT:Rich -->
<p>Xalan is an XSLT processor for transforming XML documents into HTML,
text, or other XML document types. It implements the W3C Recommendations
for XSL Transformations (XSLT) and the XML Path Language (XPath). It can
be used from the command line, in an applet or a servlet, or as a module
in other program.
</p>
-Des:
##----------------------------------------
=Pkg: xaw3d 1.5E 408.13 src
=Sum: 3D Athena Widgets
+Des:
<!-- DT:Rich -->
<p>This is a library that can be used instead of the standard
Athena-Widget-Library. It has tried to keep the standard of the libXaw
library.
There are also programs which explicitly use this library (this is
the reason why the library was included).
</p><p>
NOTE: Do NOT replace /usr/X11R6/lib/libXaw.so.6.1!
</p>
-Des:
##----------------------------------------
=Pkg: xen 4.0.0_21091_04 0.2.6 src
=Sum: Xen Virtualization: Hypervisor (aka VMM aka Microkernel)
+Des:
<!-- DT:Rich -->
<p>Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.
</p><p>
This package contains the Xen Hypervisor. (tm)
</p><p>
Modern computers are sufficiently powerful to use virtualization to present the illusion of many smaller virtual machines (VMs), each running a separate operating system instance. Successful partitioning of a machine to support the concurrent execution of multiple operating systems poses several challenges. Firstly, virtual machines must be isolated from one another: It is not acceptable for the execution of one to adversely affect the performance of another. This is particularly true when virtual machines are owned by mutually untrusting users. Secondly, it is necessary to support a variety of different operating systems to accommodate the heterogeneity of popular applications. Thirdly, the performance overhead introduced by virtualization should be small.
</p><p>
Xen uses a technique called paravirtualization: The guest OS is modified, mainly to enhance performance.
</p><p>
The Xen hypervisor (microkernel) does not provide device drivers for your hardware (except for CPU and memory). This job is left to the kernel that&#39;s running in domain 0. Thus the domain 0 kernel is privileged; it has full hardware access. It&#39;s started immediately after Xen starts up. Other domains have no access to the hardware; instead they use virtual interfaces that are provided by Xen (with the help of the domain 0 kernel).
</p><p>
Xen does support booting other Operating Systems; ports of NetBSD (Christian Limpach), FreeBSD (Kip Macy), and Plan 9 (Ron Minnich) exist. A port of Windows XP was developed for an earlier version of Xen, but is not available for release due to license restrictions.
</p><p>
In addition to this package you need to install the kernel-xen and xen-tools to use Xen. Xen 3 also supports running unmodified guests using full virtualization, if appropriate hardware is present. Install xen-tools-ioemu if you want to use this.
</p><p>
[Hypervisor is a trademark of IBM]
</p>
-Des:
##----------------------------------------
=Pkg: xerces-j2 2.8.1 238.27.1 src
=Sum: Java XML parser
+Des:
<!-- DT:Rich -->
<p>Welcome to the future! Xerces2 is the next generation of high
performance, fully compliant XML parsers in the Apache Xerces family.
This new version of Xerces introduces the Xerces Native Interface (XNI),
a complete framework for building parser components and configurations
that is extremely modular and easy to program.
</p><p>
The Apache Xerces2 parser is the reference implementation of XNI but
other parser components, configurations, and parsers can be written
using the Xerces Native Interface. For complete design and
implementation documents, refer to the XNI Manual.
</p><p>
Xerces 2 is a fully conforming XML Schema processor. For more
information, refer to the XML Schema page.
</p><p>
Xerces 2 also provides a partial implementation of Document Object Model
Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working
Drafts. For more information, refer to the DOM Level 3 Implementation
page.
</p>
-Des:
##----------------------------------------
=Pkg: xfsprogs 3.1.1 0.1.36 src
=Sum: Utilities for managing the XFS file system
+Des:
<!-- DT:Rich -->
<p>A set of commands to use the XFS file system, including mkfs.xfs.
</p><p>
</p><p>
XFS is a high performance journaling file system which originated
on the SGI IRIX platform.  It is completely multithreaded. It can
support large files and large file systems, extended attributes,
and variable block sizes.It is extent based and makes extensive use of
Btrees (directories, extents, and free space) to aid both performance
and scalability.
</p><p>
</p><p>
Refer to the documentation at http://oss.sgi.com/projects/xfs/
for complete details.  This implementation is on-disk compatible
with the IRIX version of XFS.
</p>
-Des:
##----------------------------------------
=Pkg: xine-lib 1.1.15 23.3.9 src
=Sum: Video Player with Plug-Ins
+Des:
<!-- DT:Rich -->
<p>xine is a free multimedia player. It plays back CDs, DVDs, and VCDs. It also decodes multimedia files like AVI, MOV, WMV, and MP3 from local disk drives, and displays multimedia streamed over the Internet. It interprets many of the most common multimedia formats available - and some of the most uncommon formats, too.
</p><p>
The libxine1 package may lack certain features because of legal requirements (potential patent violation).
See http://www.opensuse.org/xine#Legal_Matters
</p>
-Des:
##----------------------------------------
=Pkg: xml-commons-resolver 1.1 237.24 src
=Sum: Resolver subproject of xml-commons
+Des:
<!-- DT:Rich -->
<p>xml-commons is focussed on common code and guidelines for xml projects. The first focus will be to organize and have common packaging for the various externally-defined standards code relating to XML - things like the DOM, SAX, and JAXP interfaces.
</p><p>
This package contains the resolver subproject of xml-commons.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libICE 7.4 1.15 src
=Sum: X.Org ICE library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org ICE library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libSM 7.4 1.18 src
=Sum: X.Org SM library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org SM library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libX11 7.4 5.5 src
=Sum: X.Org X11 library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org X11 library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXau 7.4 1.15 src
=Sum: X.Org Xau library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xau library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXdmcp 7.4 1.15 src
=Sum: X.Org Xdmcp library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xdmcp library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXext 7.4 1.16.21 src
=Sum: X.Org Xext library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xext library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXfixes 7.4 1.14 src
=Sum: X.Org Xfixes library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xfixes library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXmu 7.4 1.17 src
=Sum: X.Org Xmu library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xmu library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXp 7.4 1.14 src
=Sum: X.Org Xp library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xp library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXpm 7.4 1.17 src
=Sum: X.Org Xpm library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xpm library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXprintUtil 7.4 1.17 src
=Sum: X.Org XprintUtil library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org XprintUtil library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXrender 7.4 1.14 src
=Sum: X.Org Xrender library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xrender library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXt 7.4 1.17 src
=Sum: X.Org Xt library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xt library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libXv 7.4 1.14 src
=Sum: X.Org Xv library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Xv library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libfontenc 7.4 1.15 src
=Sum: X.Org fontenc library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org fontenc library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libs 7.4 8.24.2 src
=Sum: Remaining X.Org libraries
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the remaining X.Org libraries.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxcb 7.4 1.20.34 src
=Sum: X.Org xcb library
+Des:
<!-- DT:Rich -->
<p>This package contains the X.Org xcb library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-libxkbfile 7.4 1.14 src
=Sum: X.Org xkbfile library
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org xkbfile library.
</p>
-Des:
##----------------------------------------
=Pkg: xorg-x11-server 7.4 27.19.19 src
=Sum: X.Org Server
+Del:
<!-- DT:Rich -->
<p>You need this package if you want to run the X Window System.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p></p><p>
This package contains the X.Org Server.
</p>
-Des:
##----------------------------------------
=Pkg: yast2 2.17.92 0.2.27 src
=Sum: YaST2 - Paquet principal
+Del:
<!-- DT:Rich -->
<p>YaST2 est un outils pour installer et configurer le système SuSE Linux.
Il fournit des capacités simple d&#39;administration.
L&#39;installation et la configuration du système par YaST2 est
expliqué en détail dans le manuel accompagnant SuSE Linux.
Il n&#39;est pas possible, sans ce paquet, d&#39;effectuer une installation avec YaST2.
</p>
-Del:
+Des:
<!-- DT:Rich -->
<p>This package contains scripts and data needed for SuSE Linux
installation with YaST2
</p>
-Des:
+Ins:
<!-- DT:Rich -->
<p>YaST2 est un outils pour installer et configurer le système SuSE Linux.
Il fournit des capacités simple d&#39;administration.
L&#39;installation et la configuration du système par YaST2 est
expliqué en détail dans le manuel accompagnant SuSE Linux.
Il n&#39;est pas possible, sans ce paquet, d&#39;effectuer une installation avec YaST2.
</p>
-Ins:
##----------------------------------------
=Pkg: yast2-core 2.17.35 0.2.17 src
=Sum: YaST2 - Core Libraries
+Des:
<!-- DT:Rich -->
<p>This package contains the scanner, parser, and interpreter runtime
library for the YCP scripting language used in YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-inetd 2.17.3 1.53 src
=Sum: YaST2 - Network Services Configuration
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for configuring the inetd and xinetd daemons.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-installation 2.17.75 0.2.13 src
=Sum: YaST2 - Installation Parts
+Des:
<!-- DT:Rich -->
<p>System installation code as present on installation media.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-libyui 2.18.8 1.1.51 src
=Sum: YaST2 - User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This is the YaST2 user interface engine that provides the abstraction from graphical user interfaces (Qt, Gtk) and text based user interfaces (ncurses).
</p><p>
This can be used independently of YaST2 for generic (C++) applications. This package has very few dependencies.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-mail 2.17.5 1.3.66 src
=Sum: YaST2 - Configuration Mail
+Des:
<!-- DT:Rich -->
<p>The YaST2 component for mail configuration.
It handles Postfix, Cyrus, Amavis and Fetchmail.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ncurses 2.17.17 0.4.38 src
=Sum: YaST2 - Interface utilisateur en mode texte
+Des:
<!-- DT:Rich -->
<p>This package contains the character based (ncurses) user interface
component for YaST2.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-network 2.17.137 0.2.8 src
=Sum: YaST2 - Configuration réseau
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for network configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-printer 2.17.63 0.2.43 src
=Sum: YaST2 - Printer Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the YaST2 component for printer configuration.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-qt 2.18.11 0.2.12 src
=Sum: YaST2 - Interface graphique (GUI)
+Des:
<!-- DT:Rich -->
<p>Une des nombreuses interfaces utilisateurs disponibles pour YaST2, basé sur Qt et le système X Window.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-storage 2.17.99 0.2.5 src
=Sum: YaST2 - Storage Configuration
+Des:
<!-- DT:Rich -->
<p>This package contains the files for YaST2 that handle access to disk devices during
installation and on an installed system.
</p>
-Des:
##----------------------------------------
=Pkg: yast2-ycp-ui-bindings 2.18.5 1.1.60 src
=Sum: YaST2 - YCP Bindings for the YaST2 User Interface Engine
+Des:
<!-- DT:Rich -->
<p>This package makes the generic YaST2 user interface engine available for YCP applications (YCP is the scripting language in which most YaST2 modules are written).
</p>
-Des:
##----------------------------------------
=Pkg: zlib 1.2.3 106.34 src
=Sum: Bibliothèque de compression de données
+Des:
<!-- DT:Rich -->
<p>ftp://ds.internic.net/rfc/rfc1950.txt (format zlib), rfc1951.txt (format
deflate) and rfc1952.txt (format gzip). Ces documents sont aussi disponible dans
d&#39;autres formats depuis ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html.
</p>
-Des:
##----------------------------------------
=Pkg: zvbi 0.2.33 1.17 src
=Sum: Linux "VBI proxy"
+Des:
<!-- DT:Rich -->
<p>With &quot;video4linux&quot; drivers only one application at a time can capture
VBI data.  The 2nd generation &quot;v4l2&quot; API allows multiple clients to open
a device, but still only one client may read from the device.  If for
example the Nxtvepg daemon runs in the background users will not be able
to start a Teletext application.  The VBI proxy was developed as a
solution to this problem.
</p>
-Des:
