Class: Integer

    # File lib/mathn.rb, line 37
37:   def Integer.from_prime_division(pd)
38:     value = 1
39:     for prime, index in pd
40:       value *= prime**index
41:     end
42:     value
43:   end

Integer.induced_from(obj) => fixnum, bignum

Convert obj to an Integer.

[Source]

/*
 * call-seq:
 *   Integer.induced_from(obj)    =>  fixnum, bignum
 *
 * Convert <code>obj</code> to an Integer.
 */

static VALUE
rb_int_induced_from(klass, x)
    VALUE klass, x;
{
    switch (TYPE(x)) {
    case T_FIXNUM:
    case T_BIGNUM:
       return x;
    case T_FLOAT:
       return rb_funcall(x, id_to_i, 0);
    default:
       rb_raise(rb_eTypeError, "failed to convert %s into Integer",
                rb_obj_classname(x));
    }
}

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

int.chr => string

Returns a string containing the ASCII character represented by the receiver‘s value.

   65.chr    #=> "A"
   ?a.chr    #=> "a"
   230.chr   #=> "\346"

[Source]

/*
 *  call-seq:
 *     int.chr    => string
 *  
 *  Returns a string containing the ASCII character represented by the
 *  receiver's value.
 *     
 *     65.chr    #=> "A"
 *     ?a.chr    #=> "a"
 *     230.chr   #=> "\346"
 */

static VALUE
int_chr(num)
    VALUE num;
{
    char c;
    long i = NUM2LONG(num);

    if (i < 0 || 0xff < i)
        rb_raise(rb_eRangeError, "%ld out of char range", i);
    c = i;
    return rb_str_new(&c, 1);
}

denominator()

In an integer, the denominator is 1. Therefore, this method returns 1.

[Source]

     # File lib/rational.rb, line 417
417:   def denominator
418:     1
419:   end

int.downto(limit) {|i| block } => int

Iterates block, passing decreasing values from int down to and including limit.

   5.downto(1) { |n| print n, ".. " }
   print "  Liftoff!\n"

produces:

   5.. 4.. 3.. 2.. 1..   Liftoff!

[Source]

/*
 *  call-seq:
 *     int.downto(limit) {|i| block }     => int
 *  
 *  Iterates <em>block</em>, passing decreasing values from <i>int</i>
 *  down to and including <i>limit</i>.
 *     
 *     5.downto(1) { |n| print n, ".. " }
 *     print "  Liftoff!\n"
 *     
 *  <em>produces:</em>
 *     
 *     5.. 4.. 3.. 2.. 1..   Liftoff!
 */

static VALUE
int_downto(from, to)
    VALUE from, to;
{
    if (FIXNUM_P(from) && FIXNUM_P(to)) {
        long i, end;

        end = FIX2LONG(to);
        for (i=FIX2LONG(from); i >= end; i--) {
            rb_yield(LONG2FIX(i));
        }
    }
    else {
        VALUE i = from, c;

        while (!(c = rb_funcall(i, '<', 1, to))) {
            rb_yield(i);
            i = rb_funcall(i, '-', 1, INT2FIX(1));
        }
        if (NIL_P(c)) rb_cmperr(i, to);
    }
    return from;
}

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

gcd(other)

Returns the greatest common denominator of the two numbers (self and n).

Examples:

  72.gcd 168           # -> 24
  19.gcd 36            # -> 1

The result is positive, no matter the sign of the arguments.

[Source]

     # File lib/rational.rb, line 438
438:   def gcd(other)
439:     min = self.abs
440:     max = other.abs
441:     while min > 0
442:       tmp = min
443:       min = max % min
444:       max = tmp
445:     end
446:     max
447:   end

gcd2(int)

[Source]

    # File lib/mathn.rb, line 19
19:   def gcd2(int)
20:     a = self.abs
21:     b = int.abs
22:     a, b = b, a if a < b
23:     
24:     pd_a = a.prime_division
25:     pd_b = b.prime_division
26:     
27:     gcd = 1
28:     for pair in pd_a
29:       as = pd_b.assoc(pair[0])
30:       if as
31:         gcd *= as[0] ** [as[1], pair[1]].min
32:       end
33:     end
34:     return gcd
35:   end

gcdlcm(other)

Returns the GCD and the LCM (see gcd and lcm) of the two arguments (self and other). This is more efficient than calculating them separately.

Example:

  6.gcdlcm 9     # -> [3, 18]

[Source]

     # File lib/rational.rb, line 473
473:   def gcdlcm(other)
474:     gcd = self.gcd(other)
475:     if self.zero? or other.zero?
476:       [gcd, 0]
477:     else
478:       [gcd, (self.div(gcd) * other).abs]
479:     end
480:   end

int.integer? → true

Always returns true.

[Source]

/*
 *  call-seq:
 *     int.integer? -> true
 *  
 *  Always returns <code>true</code>.
 */

static VALUE
int_int_p(num)
    VALUE num;
{
    return Qtrue;
}

lcm(other)

Returns the lowest common multiple (LCM) of the two arguments (self and other).

Examples:

  6.lcm 7        # -> 42
  6.lcm 9        # -> 18

[Source]

     # File lib/rational.rb, line 457
457:   def lcm(other)
458:     if self.zero? or other.zero?
459:       0
460:     else
461:       (self.div(self.gcd(other)) * other).abs
462:     end
463:   end

int.next => integer
int.succ => integer

Returns the Integer equal to int + 1.

   1.next      #=> 2
   (-1).next   #=> 0

[Source]

/*
 *  call-seq:
 *     int.next    => integer
 *     int.succ    => integer
 *  
 *  Returns the <code>Integer</code> equal to <i>int</i> + 1.
 *     
 *     1.next      #=> 2
 *     (-1).next   #=> 0
 */

static VALUE
int_succ(num)
    VALUE num;
{
    if (FIXNUM_P(num)) {
        long i = FIX2LONG(num) + 1;
        return LONG2NUM(i);
    }
    return rb_funcall(num, '+', 1, INT2FIX(1));
}

numerator()

In an integer, the value is the numerator of its rational equivalent. Therefore, this method returns self.

[Source]

     # File lib/rational.rb, line 410
410:   def numerator
411:     self
412:   end

prime_division()

[Source]

    # File lib/mathn.rb, line 45
45:   def prime_division
46:     raise ZeroDivisionError if self == 0
47:     ps = Prime.new
48:     value = self
49:     pv = []
50:     for prime in ps
51:       count = 0
52:       while (value1, mod = value.divmod(prime)
53:              mod) == 0
54:         value = value1
55:         count += 1
56:       end
57:       if count != 0
58:         pv.push [prime, count]
59:       end
60:       break if prime * prime  >= value
61:     end
62:     if value > 1
63:       pv.push [value, 1]
64:     end
65:     return pv
66:   end

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

int.next => integer
int.succ => integer

Returns the Integer equal to int + 1.

   1.next      #=> 2
   (-1).next   #=> 0

[Source]

/*
 *  call-seq:
 *     int.next    => integer
 *     int.succ    => integer
 *  
 *  Returns the <code>Integer</code> equal to <i>int</i> + 1.
 *     
 *     1.next      #=> 2
 *     (-1).next   #=> 0
 */

static VALUE
int_succ(num)
    VALUE num;
{
    if (FIXNUM_P(num)) {
        long i = FIX2LONG(num) + 1;
        return LONG2NUM(i);
    }
    return rb_funcall(num, '+', 1, INT2FIX(1));
}

int.times {|i| block } => int

Iterates block int times, passing in values from zero to int - 1.

   5.times do |i|
     print i, " "
   end

produces:

   0 1 2 3 4

[Source]

/*
 *  call-seq:
 *     int.times {|i| block }     => int
 *  
 *  Iterates block <i>int</i> times, passing in values from zero to
 *  <i>int</i> - 1.
 *     
 *     5.times do |i|
 *       print i, " "
 *     end
 *     
 *  <em>produces:</em>
 *     
 *     0 1 2 3 4
 */

static VALUE
int_dotimes(num)
    VALUE num;
{
    if (FIXNUM_P(num)) {
        long i, end;

        end = FIX2LONG(num);
        for (i=0; i<end; i++) {
            rb_yield(LONG2FIX(i));
        }
    }
    else {
        VALUE i = INT2FIX(0);

        for (;;) {
            if (!RTEST(rb_funcall(i, '<', 1, num))) break;
            rb_yield(i);
            i = rb_funcall(i, '+', 1, INT2FIX(1));
        }
    }
    return num;
}

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

to_r()

Returns a Rational representation of this integer.

[Source]

     # File lib/rational.rb, line 424
424:   def to_r
425:     Rational(self, 1)
426:   end

to_yaml( opts = {} )

[Source]

     # File lib/yaml/rubytypes.rb, line 358
358:         def to_yaml( opts = {} )
359:                 YAML::quick_emit( nil, opts ) do |out|
360:             out.scalar( "tag:yaml.org,2002:int", self.to_s, :plain )
361:         end
362:         end

int.to_i => int
int.to_int => int
int.floor => int
int.ceil => int
int.round => int
int.truncate => int

As int is already an Integer, all these methods simply return the receiver.

[Source]

/*
 *  call-seq:
 *     int.to_i      => int
 *     int.to_int    => int
 *     int.floor     => int
 *     int.ceil      => int
 *     int.round     => int
 *     int.truncate  => int
 *
 *  As <i>int</i> is already an <code>Integer</code>, all these
 *  methods simply return the receiver.
 */

static VALUE
int_to_i(num)
    VALUE num;
{
    return num;
}

int.upto(limit) {|i| block } => int

Iterates block, passing in integer values from int up to and including limit.

   5.upto(10) { |i| print i, " " }

produces:

   5 6 7 8 9 10

[Source]

/*
 *  call-seq:
 *     int.upto(limit) {|i| block }     => int
 *  
 *  Iterates <em>block</em>, passing in integer values from <i>int</i>
 *  up to and including <i>limit</i>.
 *     
 *     5.upto(10) { |i| print i, " " }
 *     
 *  <em>produces:</em>
 *     
 *     5 6 7 8 9 10
 */

static VALUE
int_upto(from, to)
    VALUE from, to;
{
    if (FIXNUM_P(from) && FIXNUM_P(to)) {
        long i, end;

        end = FIX2LONG(to);
        for (i = FIX2LONG(from); i <= end; i++) {
            rb_yield(LONG2FIX(i));
        }
    }
    else {
        VALUE i = from, c;

        while (!(c = rb_funcall(i, '>', 1, to))) {
            rb_yield(i);
            i = rb_funcall(i, '+', 1, INT2FIX(1));
        }
        if (NIL_P(c)) rb_cmperr(i, to);
    }
    return from;
}

Methods

Included Modules

Public Class methods

Public Instance methods