Privoxy Frequently Asked Questions

Copyright  2001-2006 by Privoxy Developers

$Id: faq.txt,v 1.47 2006/09/22 22:33:04 hal9 Exp $

This FAQ gives quick answers to frequently asked questions about Privoxy. It is
not a substitute for the Privoxy User Manual.

What is Privoxy?

Privoxy is a web proxy with advanced filtering capabilities for protecting
privacy, modifying web page data, managing cookies, controlling access, and
removing ads, banners, pop-ups and other obnoxious Internet junk. Privoxy has a
very flexible configuration and can be customized to suit individual needs and
tastes. Privoxy has application for both stand-alone systems and multi-user
networks.

Privoxy is based on Internet Junkbuster (tm).

Please note that this document is a work in progress. This copy represents the
state at the release of version 3.0.5. You can find the latest version of the
document at http://www.privoxy.org/faq/. Please see the Contact section if you
want to contact the developers.

-------------------------------------------------------------------------------

Table of Contents
1. General Information
   
    1.1. Who should use Privoxy?
    1.2. Is Privoxy the best choice for me?
    1.3. What is a "proxy"? How does Privoxy work?
    1.4. What is this new version of "Junkbuster"?
    1.5. Why "Privoxy"? Why change the name from Junkbuster at all?
    1.6. How does Privoxy differ from the old Junkbuster?
    1.7. How does Privoxy know what is an ad, and what is not?
    1.8. Can Privoxy make mistakes? This does not sound very scientific.
    1.9. Will I have to configure Privoxy before I can use it?
    1.10. My browser does the same things as Privoxy. Why should I use Privoxy
        at all?
    1.11. Why should I trust Privoxy?
    1.12. Is there is a license or fee? What about a warranty? Registration?
    1.13. Can Privoxy remove spyware? Adware? Viruses?
    1.14. Can I use Privoxy with other ad-blocking software?
    1.15. I would like to help you, what can I do?
       
        1.15.1. Would you like to participate?
        1.15.2. Contribute!
        1.15.3. Software
       
2. Installation
   
    2.1. Which browsers are supported by Privoxy?
    2.2. Which operating systems are supported?
    2.3. Can I use Privoxy with my email client?
    2.4. Can I install Privoxy over Junkbuster?
    2.5. I just installed Privoxy. Is there anything special I have to do now?
    2.6. What is the proxy address of Privoxy?
    2.7. I just installed Privoxy, and nothing is happening. All the ads are
        there. What's wrong?
    2.8. I get a "Privoxy is not being used" dummy page although Privoxy is
        running and being used.
   
3. Configuration
   
    3.1. Where can I get updated Actions Files?
    3.2. Can I use my old config files?
    3.3. What exactly is an "actions" file?
    3.4. The "actions" concept confuses me. Please list some of these
        "actions".
    3.5. How are actions files configured? What is the easiest way to do this?
    3.6. There are several different "actions" files. What are the differences?
    3.7. How can I make my Yahoo/Hotmail/Gmail account work?
    3.8. What's the difference between the "Cautious", "Medium" and "Advanced"
        defaults?
    3.9. Why can I change the configuration with a browser? Does that not raise
        security issues?
    3.10. What is the default.filter file? What is a "filter"?
    3.11. How can I set up Privoxy to act as a proxy for my LAN?
    3.12. Instead of ads, now I get a checkerboard pattern. I don't want to see
        anything.
    3.13. Why would anybody want to see a checkerboard pattern?
    3.14. I see some images being replaced by a text instead of the
        checkerboard image. Why and how do I get rid of this?
    3.15. Can Privoxy run as a service on Win2K/NT/XP?
    3.16. How can I make Privoxy work with other proxies like Squid or Tor?
    3.17. Can I just set Privoxy to use port 80 and thus avoid individual
        browser configuration?
    3.18. Can Privoxy run as a "transparent" proxy?
    3.19. How can I configure Privoxy for use with Outlook Express?
    3.20. How can I have separate rules just for HTML mail?
    3.21. I sometimes notice cookies sneaking through. How?
    3.22. Are all cookies bad? Why?
    3.23. How can I allow permanent cookies for my trusted sites?
    3.24. Can I have separate configurations for different users?
    3.25. Can I set-up Privoxy as a whitelist of "good" sites?
   
4. Miscellaneous
   
    4.1. How much does Privoxy slow my browsing down? This has to add extra
        time to browsing.
    4.2. I notice considerable delays in page requests compared to the old
        Junkbuster. What's wrong?
    4.3. What are "http://config.privoxy.org/" and "http://p.p/"?
    4.4. How can I submit new ads, or report problems?
    4.5. Why doesn't anyone answer my support request?
    4.6. How can I hide my IP address?
    4.7. Can Privoxy guarantee I am anonymous?
    4.8. A test site says I am not using a Proxy.
    4.9. How do I use Privoxy together with Tor?
    4.10. Might some things break because header information or content is
        being altered?
    4.11. Can Privoxy act as a "caching" proxy to speed up web browsing?
    4.12. What about as a firewall? Can Privoxy protect me?
    4.13. I have large empty spaces / a checkerboard pattern now where ads used
        to be. Why?
    4.14. How can Privoxy filter Secure (HTTPS) URLs?
    4.15. Privoxy runs as a "server". How secure is it? Do I need to take any
        special precautions?
    4.16. How can I temporarily disable Privoxy?
    4.17. When "disabled" is Privoxy totally out of the picture?
    4.18. My logs show Privoxy "crunches" ads, but also its own internal CGI
        pages. What is a "crunch"?
    4.19. Can Privoxy effect files that I download from a webserver? FTP
        server?
    4.20. I just downloaded a Perl script, and Privoxy altered it! Yikes, what
        is wrong!
    4.21. Should I continue to use a "HOSTS" file for ad-blocking?
    4.22. Where can I find more information about Privoxy and related issues?
    4.23. I've noticed that Privoxy changes "Microsoft" to "MicroSuck"! Why are
        you manipulating my browsing?
   
5. Troubleshooting
   
    5.1. I am getting "connection refused" with every web page?
    5.2. I just added a new rule, but the steenkin ad is still getting through.
        How?
    5.3. One of my favorite sites does not work with Privoxy. What can I do?
    5.4. After installing Privoxy, I have to log in every time I start IE. What
        gives?
    5.5. I cannot connect to any FTP sites. Privoxy is blocking me.
    5.6. In Mac OSX, I can't configure Microsoft Internet Explorer to use
        Privoxy as the HTTP proxy.
    5.7. In Mac OSX, I dragged the Privoxy folder to the trash in order to
        uninstall it. Now the finder tells me I don't have sufficient
        privileges to empty the trash.
    5.8. In Mac OSX Panther (10.3), images often fail to load and/or I
        experience random delays in page loading. I'm using localhost as my
        browser's proxy setting.
    5.9. I get a completely blank page at one site. "View Source" shows only:
        <html><body></body></html>. Without Privoxy the page loads fine.
    5.10. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?
    5.11. My logs show many "Unable to get my own hostname" lines. Why?
    5.12. When I try to launch Privoxy, I get an error message "port 8118 is
        already in use" (or similar wording). Why?
    5.13. Pages with UTF-8 fonts are garbled.
    5.14. Why are binary files (such as images) corrupted when Privoxy is used?
    5.15. What is the "demoronizer" and why is it there?
    5.16. Why do I keep seeing "PrivoxyWindowOpen()" in raw source code?
    5.17. I am getting too many DNS errors like "404 No Such Domain". Why can't
        Privoxy do this better?
    5.18. At one site Privoxy just hangs, and starts taking all CPU. Why is
        this?
    5.19. I just installed Privoxy, and all my browsing has slowed to a crawl.
        What gives?
   
6. Contacting the developers, Bug Reporting and Feature Requests
   
    6.1. Get Support
    6.2. Reporting Problems
       
        6.2.1. Reporting Ads or Other Configuration Problems
        6.2.2. Reporting Bugs
       
    6.3. Request New Features
    6.4. Other
   
7. Privoxy Copyright, License and History
   
    7.1. License
    7.2. History
   
1. General Information

1.1. Who should use Privoxy?

Anyone that is interested in security, privacy, or in finer-grained control
over their web and Internet experience. Everyone is encouraged to try Privoxy.

-------------------------------------------------------------------------------

1.2. Is Privoxy the best choice for me?

Privoxy is certainly a good choice, especially for those who want more control
and security. Those that have the ability to fine-tune their installation will
benefit the most. One of Privoxy's strength's is that it is highly configurable
giving you the ability to completely personalize your installation. Being
familiar with, or at least having an interest in learning about HTTP and other
networking protocols, HTML, IP (Internet Protocol), and "Regular Expressions"
will be a big plus and will help you get the most out of Privoxy.

Much of Privoxy's configuration can be done with a Web browser. But there are
areas where configuration is done using a text editor to edit configuration
files.

-------------------------------------------------------------------------------

1.3. What is a "proxy"? How does Privoxy work?

A web proxy is a service, based on a software such as Privoxy, that clients
(i.e. browsers) can use instead of connecting directly to web servers on the
Internet. The clients then ask the proxy to fetch the objects they need (web
pages, images, movies etc) on their behalf, and when the proxy has done so, it
hands the results back to the client. It is a "go-between". See the Wikipedia
proxy definition for more.

There are many reasons to use web proxies, such as security (firewalling),
efficiency (caching) and others, and there are any number of proxies to
accommodate those needs.

Privoxy is a proxy that is primarily focused on privacy protection, ad and junk
elimination and freeing the user from restrictions placed on his activities.
Sitting between your browser(s) and the Internet, it is in a perfect position
to filter outbound personal information that your browser is leaking, as well
as inbound junk. It uses a variety of techniques to do this, all of which are
under your complete control via the various configuration files and options.

-------------------------------------------------------------------------------

1.4. What is this new version of "Junkbuster"?

Along time ago, there was the Internet Junkbuster, by Anonymous Coders and 
Junkbusters Corporation. This saved many users a lot of pain in the early days
of web advertising and user tracking.

But the web, its protocols and standards, and with it, the techniques for
forcing ads on users, give up autonomy over their browsing, and for tracking
them, keeps evolving. Unfortunately, the Internet Junkbuster did not. Version
2.0.2, published in 1998, was (and is) the last official release available from
Junkbusters Corporation. Fortunately, it had been released under the GNU GPL,
which allowed further development by others.

So Stefan Waldherr started maintaining an improved version of the software, to
which eventually a number of people contributed patches. It could already
replace banners with a transparent image, and had a first version of pop-up
killing, but it was still very closely based on the original, with all its
limitations, such as the lack of HTTP/1.1 support, flexible per-site
configuration, or content modification. The last release from this effort was
version 2.0.2-10, published in 2000.

Then, some developers picked up the thread, and started turning the software
inside out, upside down, and then reassembled it, adding many new features
along the way.

The result of this is Privoxy, whose first stable version, 3.0, was released
August, 2002.

-------------------------------------------------------------------------------

1.5. Why "Privoxy"? Why change the name from Junkbuster at all?

Junkbusters Corporation continues to offer their original version of the
Internet Junkbuster, so publishing our Junkbuster-derived software under the
same name led to confusion.

There are also potential legal complications from the continued use of the
Junkbuster name, which is a registered trademark of Junkbusters Corporation.
There are, however, no objections from Junkbusters Corporation to the Privoxy
project itself, and they, in fact, still share our ideals and goals.

The developers also believed that there are so many improvements over the
original code, that it was time to make a clean break from the past and make a
name in their own right.

Privoxy is the "Privacy Enhancing Proxy". Also, its content modification and
junk suppression gives you, the user, more control, more freedom, and allows
you to browse your personal and "private edition" of the web.

-------------------------------------------------------------------------------

1.6. How does Privoxy differ from the old Junkbuster?

Privoxy picks up where Junkbuster left off. All the old features remain. The
new Privoxy still blocks ads and banners, still manages cookies, and still
helps protect your privacy. But, these are all greatly enhanced, and many, many
new features have been added, all in the same vein.

The configuration has changed significantly as well. This is something that
users will notice right off the bat if upgrading from Junkbuster 2.0.x. The
"blocklist" "cookielist", "imagelist" and much more has been combined into the
"actions" files, with a completely different syntax. See the What's New page
for the latest updates.

Privoxy's new features include:

  * Integrated browser based configuration and control utility at http://
    config.privoxy.org/ (shortcut: http://p.p/). Browser-based tracing of rule
    and filter effects. Remote toggling.
   
  * Web page content filtering (removes banners based on size, invisible
    "web-bugs", JavaScript and HTML annoyances, pop-up windows, etc.)
   
  * Modularized configuration that allows for standard settings and user
    settings to reside in separate files, so that installing updated actions
    files won't overwrite individual user settings.
   
  * HTTP/1.1 compliant (but not all optional 1.1 features are supported).
   
  * Support for Perl Compatible Regular Expressions in the configuration files,
    and generally a more sophisticated and flexible configuration syntax over
    previous versions.
   
  * Improved cookie management features (e.g. session based cookies).
   
  * GIF de-animation.
   
  * Bypass many click-tracking scripts (avoids script redirection).
   
  * Multi-threaded (POSIX and native threads).
   
  * User-customizable HTML templates for all proxy-generated pages (e.g.
    "blocked" page).
   
  * Auto-detection and re-reading of config file changes.
   
  * Improved signal handling, and a true daemon mode (Unix).
   
  * Every feature now controllable on a per-site or per-location basis,
    configuration more powerful and versatile over-all.
   
  * Many smaller new features added, limitations and bugs removed, and security
    holes fixed.
   
-------------------------------------------------------------------------------

1.7. How does Privoxy know what is an ad, and what is not?

Privoxy's approach to blocking ads is twofold:

First, there are certain patterns in the locations (URLs) of banner images.
This applies to both the path (you wouldn't guess how many web sites serve
their banners from a directory called "banners"!) and the host (blocking the
big banner hosting services like doublecklick.net already helps a lot). Privoxy
takes advantage of this fact by using URL patterns to sort out and block the
requests for things that sound like they would be ads or banners.

Second, banners tend to come in certain sizes. But you can't tell the size of
an image by its URL without downloading it, and if you do, it's too late to
save bandwidth. Therefore, Privoxy also inspects the HTML sources of web pages
while they are loaded, and replaces references to images with standard banner
sizes by dummy references, so that your browser doesn't request them anymore in
the first place.

Both of this involves a certain amount of guesswork and is, of course, freely
and readily configurable.

-------------------------------------------------------------------------------

1.8. Can Privoxy make mistakes? This does not sound very scientific.

Actually, it's a black art ;-) And yes, it is always possible to have a broad
rule accidentally block or change something by mistake. You will almost surely
run into such situations at some point. It is tricky writing rules to cover
every conceivable possibility, and not occasionally get false positives.

But this should not be a big concern since the Privoxy configuration is very
flexible, and includes tools to help identify these types of situations so they
can be addressed as needed, allowing you to customize your installation. (See
the Troubleshooting section below.)

-------------------------------------------------------------------------------

1.9. Will I have to configure Privoxy before I can use it?

No, not really. The default installation should give you a good starting point,
and block most unwanted content.

But you will certainly run into situations where there are false positives, or
ads not being blocked that you may not want to see. In these cases, you would
certainly benefit by customizing Privoxy's configuration to more closely match
your individual situation. And we would encourage you to do this. This is where
the real power of Privoxy lies!

You will have to tell your browser about Privoxy (see the Installation section
below).

-------------------------------------------------------------------------------

1.10. My browser does the same things as Privoxy. Why should I use Privoxy at
all?

Modern browsers do indeed have some of the same functionality as Privoxy. Maybe
this is adequate for you. But Privoxy is much more versatile and powerful, and
can do a number of things that browsers just can't.

In addition, a proxy is good choice if you use multiple browsers, or have a LAN
with multiple computers. This way all the configuration is in one place, and
you don't have to maintain a similar configuration for possibly many browsers.

-------------------------------------------------------------------------------

1.11. Why should I trust Privoxy?

The most important reason is because you have access to everything, and you can
control everything. You can check every line of every configuration file
yourself. You can check every last bit of source code should you desire. And
even if you can't read code, there should be some comfort in knowing that
thousands of other people can, and do read it. You can build the software from
scratch, if you want, so that you know the executable is clean, and that it is
yours. In fact, we encourage this level of scrutiny. It is one reason we use
Privoxy ourselves.

-------------------------------------------------------------------------------

1.12. Is there is a license or fee? What about a warranty? Registration?

Privoxy is licensed under the GNU General Public License (GPL). It is free to
use, copy, modify or distribute as you wish under the terms of this license.
Please see the Copyright section for more information on the license and
copyright. Or the LICENSE file that should be included.

There is no warranty of any kind, expressed, implied or otherwise. That is
something that would cost real money ;-) There is no registration either.
Privoxy really is free in every respect!

-------------------------------------------------------------------------------

1.13. Can Privoxy remove spyware? Adware? Viruses?

No. Privoxy cannot remove anything. It is not a removal tool. It is a
preventative. Privoxy can help prevent contact from sites that use such tactics
with approriate configuration rules, and thus could conceivably prevent
contamination from such sites.

-------------------------------------------------------------------------------

1.14. Can I use Privoxy with other ad-blocking software?

Privoxy should work fine with other proxies and other software in general.

But it is probably not necessary to use Privoxy in conjunction with other
ad-blocking products, and this could conceivably cause undesirable results. It
would be better to choose one software or the other and work a little to tweak
its configuration to your liking.

-------------------------------------------------------------------------------

1.15. I would like to help you, what can I do?

1.15.1. Would you like to participate?

Well, we always need help. There is something for everybody who wants to help
us. We welcome new developers, packagers, testers, documentation writers or
really anyone with a desire to help in any way. You DO NOT need to be a
"programmer". There are many other tasks available. In fact, the programmers
often can't spend as much time programming because of some of the other, more
mundane things that need to be done, like checking the Tracker feedback
sections.

So first thing, get an account on SourceForge.net and mail your id to the 
developers mailing list. Then, please read the Developer's Manual, at least the
pertinent sections.

Once we have added you to the team, you'll have access to the CVS repository,
and together we'll find a suitable task for you.

-------------------------------------------------------------------------------

1.15.2. Contribute!

We, of course, welcome donations and could use money for domain registering,
buying software to test Privoxy with, and, of course, for regular world-wide
get-togethers (hahaha). If you enjoy the software and feel like helping us with
a donation, just drop us a note.

-------------------------------------------------------------------------------

1.15.3. Software

If you are a vendor of a web-related software like a browser, web server or
proxy, and would like us to ensure that Privoxy runs smoothly with your
product, you might consider supplying us with a copy or license. We can't,
however, guarantee that we will fix all potential compatibility issues as a
result.

-------------------------------------------------------------------------------

2. Installation

2.1. Which browsers are supported by Privoxy?

Any browser that can be configured to use a proxy, which should be virtually
all browsers, including Firefox, Internet Explorer, and Opera among others.
Direct browser support is not an absolute requirement since Privoxy runs as a
separate application and talks to the browser in the standardized HTTP
protocol, just like a web server does.

-------------------------------------------------------------------------------

2.2. Which operating systems are supported?

At present, Privoxy is known to run on Windows(95, 98, ME, 2000, XP), Linux
(RedHat, SuSE, Debian, Fedora, Gentoo, Slackware and others), Mac OSX, OS/2,
AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and various other flavors of Unix.

But any operating system that runs TCP/IP, can conceivably take advantage of
Privoxy in a networked situation where Privoxy would run as a server on a LAN
gateway. Then only the "gateway" needs to be running one of the above operating
systems.

Source code is freely available, so porting to other operating systems is
always a possibility.

-------------------------------------------------------------------------------

2.3. Can I use Privoxy with my email client?

As long as there is some way to set a HTTP proxy for the client, then yes, any
application can be used, whether it is strictly speaking a "browser" or not.
Though this may not be the best approach for dealing with some of the common
abuses of HTML in email. See How can I configure Privoxy with Outlook Express?
below for more on this.

Be aware that HTML email presents a number of unique security and privacy
related issues, that can require advanced skills to overcome. The developers
recommend using email clients that can be configured to convert HTML to plain
text for these reasons.

-------------------------------------------------------------------------------

2.4. Can I install Privoxy over Junkbuster?

We recommend you un-install Junkbuster first to minimize conflicts and
confusion. You may want to save your old configuration files for future
reference. The configuration files and syntax have substantially changed, so
you will need to manually port your old patterns. See the note to upgraders and
installation chapter in the User Manual for details.

Note: Some installers may automatically un-install Junkbuster, if present!

-------------------------------------------------------------------------------

2.5. I just installed Privoxy. Is there anything special I have to do now?

All browsers must be told to use Privoxy as a proxy by specifying the correct
proxy address and port number in the appropriate configuration area for the
browser. See below. You should also flush your browser's memory and disk cache
to get rid of any cached junk items, and remove any stored cookies. 

-------------------------------------------------------------------------------

2.6. What is the proxy address of Privoxy?

If you set up the Privoxy to run on the computer you browse from (rather than
your ISP's server or some networked computer on a LAN), the proxy will be on
127.0.0.1 (sometimes referred to as "localhost", which is the special name used
by every computer on the Internet to refer to itself) and the port will be 8118
(unless you have Privoxy to run on a different port with the listen-address
config option).

When configuring your browser's proxy settings you typically enter the word
"localhost" or the IP address "127.0.0.1" in the boxes next to "HTTP" and
"Secure" (HTTPS) and then the number "8118" for "port". This tells your browser
to send all web requests to Privoxy instead of directly to the Internet.

Privoxy can also be used to proxy for a Local Area Network. In this case, your
would enter either the IP address of the LAN host where Privoxy is running, or
the equivalent hostname. Port assignment would be same as above. Note that
Privoxy doesn't listen on any LAN interfaces by default.

Privoxy does not currently handle any other protocols such as FTP, SMTP, IM,
IRC, ICQ, etc. Be sure that proxying any of these other protocols is not
activated.

-------------------------------------------------------------------------------

2.7. I just installed Privoxy, and nothing is happening. All the ads are there.
What's wrong?

Did you configure your browser to use Privoxy as a proxy? It does not sound
like it. See above. You might also try flushing the browser's caches to force a
full re-reading of pages. You can verify that Privoxy is running, and your
browser is correctly configured by entering the special URL: http://p.p/. This
should take you to a page titled "This is Privoxy.." with access to Privoxy's
internal configuration. If you see this, then you are good to go. If you
receive a page saying "Privoxy is not running", then the browser is not set up
to use your Privoxy installation. If you receive anything else (probably
nothing at all), it could either be that the browser is not set up correctly,
or that Privoxy is not running at all. Check the log file. For instructions on
starting Privoxy and browser configuration, see the chapter on starting Privoxy
in the User Manual.

-------------------------------------------------------------------------------

2.8. I get a "Privoxy is not being used" dummy page although Privoxy is running
and being used.

First, make sure that Privoxy is really running and being used by visiting 
http://p.p/. You should see the Privoxy main page. If not, see the chapter on
starting Privoxy in the User Manual.

Now if http://p.p/ works for you, but other parts of Privoxy's web interface
show the dummy page, your browser has cached a redirection it encountered
before Privoxy was being used. You need to clear your browser's cache. Note
that shift-reloading the dummy page won't help, since that'll only refresh the
dummy page, not the redirection that lead you there.

The procedure for clearing the cache varies from browser to browser. For
example, Mozilla/Netscape users would click Edit --> Preferences --> Advanced
--> Cache and then click both "Clear Memory Cache" and "Clear Disk Cache". And,
Firefox users would click Tools --> Options --> Privacy --> Cache and then
click "Clear Cache Now". 

-------------------------------------------------------------------------------

3. Configuration

3.1. Where can I get updated Actions Files?

Based on your feedback and the continuing development, updates of
default.action will be made available from time to time on the files section of
our project page.

If you wish to receive an email notification whenever we release updates of
Privoxy or the actions file, subscribe to our announce mailing list,
ijbswa-announce@lists.sourceforge.net.

-------------------------------------------------------------------------------

3.2. Can I use my old config files?

The syntax and purpose of configuration files has remained the same throughout
the 3.x series. Although each release contains updated, "improved" versions and
it is recommended to use the newer configuration files. If upgrading from
version prior to 3.0.4 the syntax for fast-redirects has changed. See the 
What's New section of the User Manual for details.

But all configuration files have substantially changed from the Junkbuster
days, and early versions of Privoxy 2.x. The old files, like blocklist will not
work at all.

Refer to the What's New page for information on configuration changes that may
occur from one release to another.

-------------------------------------------------------------------------------

3.3. What exactly is an "actions" file?

Actions files are where various actions that Privoxy could take while
processing a certain request, are configured. Typically, you would define a set
of default actions that apply to all URLs, then add exceptions to these
defaults where needed. There is a wide array of actions available that give the
user a high degree of control and flexibility on how to process each and every
web page.

Actions can be defined on a URL pattern basis, i.e. for single URLs, whole web
sites, groups or parts thereof etc. Actions can also be grouped together and
then applied to requests matching one or more patterns. There are many possible
actions that might apply to any given site. As an example, if you are blocking 
cookies as one of your default actions, but need to accept cookies from a given
site, you would need to define an exception for this site in one of your
actions files, preferably in user.action.

-------------------------------------------------------------------------------

3.4. The "actions" concept confuses me. Please list some of these "actions".

For a comprehensive discussion of the actions concept, please refer to the 
actions file chapter in the user manual. It includes a list of all actions and
an actions file tutorial to get you started.

-------------------------------------------------------------------------------

3.5. How are actions files configured? What is the easiest way to do this?

Actions files are just text files in a special syntax and can be edited with a
text editor. But probably the easiest way is to access Privoxy's user interface
with your web browser at http://config.privoxy.org/ (Shortcut: http://p.p/) and
then select "View & change the current configuration" from the menu.

-------------------------------------------------------------------------------

3.6. There are several different "actions" files. What are the differences?

As of Privoxy v2.9.15, three actions files are being included, to be used for
different purposes: These are default.action, the "main" actions file which is
actively maintained by the Privoxy developers, user.action, where users are
encouraged to make their private customizations, and standard.action, which is
for internal Privoxy use only. Please see the actions chapter in the User
Manual for a more detailed explanation.

Earlier versions included three different versions of the default.action file.
The new scheme allows for greater flexibility of local configuration, and for
browser based selection of pre-defined "aggressiveness" levels.

-------------------------------------------------------------------------------

3.7. How can I make my Yahoo/Hotmail/Gmail account work?

The default configuration shouldn't impact the usability of any of these
services. It will, however, make all cookies temporary, so that your browser
will forget your login credentials in between browser sessions. If you would
like not to have to log in manually each time you access those websites, simply
turn off all cookie handling for them in the user.action file. An example for
yahoo might look like:

# Allow all cookies for Yahoo login:                                           
#                                                                              
{ -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only }    
.login.yahoo.com                                                               

These kinds of sites are often quite complex and heavy with Javascript and thus
"fragile". So if still a problem, we have an alias just for such sticky
situations:

# Gmail is a _fragile_ site:                                                   
#                                                                              
{ fragile }                                                                    
 mail.google.com                                                               

Be sure to flush your browser's caches whenever making these kinds of changes,
just to make sure the changes "take".

Make sure the domain, host and path are appropriate as well. Your browser can
tell you where you are specifically and you should use that information for
your configuration settings. Note that above it is not referenced as gmail.com,
which is a valid domain name.

-------------------------------------------------------------------------------

3.8. What's the difference between the "Cautious", "Medium" and "Advanced"
defaults?

Configuring Privoxy is not entirely trivial. To help you get started, we
provide you with three different default action "profiles" in the web based
actions file editor at http://config.privoxy.org/show-status. See the User
Manual for a list of actions, and how the default profiles are set.

Where the defaults are likely to break some sites, exceptions for known popular
"problem" sites are included, but in general, the more aggressive your default
settings are, the more exceptions you will have to make later. See the User
Manual for a more detailed discussion.

It should be noted that the "Advanced" profile (formerly known as the
"Adventuresome" profile) is more aggressive, and will make use of some of
Privoxy's advanced features. Use at your own risk!

-------------------------------------------------------------------------------

3.9. Why can I change the configuration with a browser? Does that not raise
security issues?

It may seem strange that regular users can edit the config files with their
browsers, although the whole /etc/privoxy hierarchy belongs to the user
"privoxy", with only 644 permissions.

When you use the browser-based editor, Privoxy itself is writing to the config
files. Because Privoxy is running as the user "privoxy", it can update the
config files.

If you run Privoxy for multiple untrusted users (e.g. in a LAN), you will
probably want to turn the web-based editor and remote toggle features off by
setting "enable-edit-actions 0" and "enable-remote-toggle 0" in the main
configuration file.

Note that in the default configuration, only local users (i.e. those on
"localhost") can connect to Privoxy, so this is not (normally) a security
problem.

-------------------------------------------------------------------------------

3.10. What is the default.filter file? What is a "filter"?

The default.filter file is where filters as supplied by the developers are
defined. Filters are a special subset of actions that can be used to modify or
remove, web page content on the fly. Filters apply to anything in the page
source (and optionally both client and server headers), including HTML tags,
and JavaScript. Regular expressions are used to accomplish this. There are a
number of pre-defined filters to deal with common annoyances. The filters are
only defined here, to invoke them, you need to use the filter action in one of
the actions files. Filtering is automatically disabled for inappropriate MIME
types.

If you are familiar with regular expressions, and HTML, you can look at the
provided default.filter with a text editor and define your own filters. This is
potentially a very powerful feature, but requires some expertise in both
regular expressions and HTML/HTTP. You should place any modifications to the
default filters, or any new ones you create in a separate file, such as
user.filter, so they won't be overwritten during upgrades. The ability to
define multiple filter files in config is a new feature as of v. 3.0.5.

There is no GUI editor option for this part of the configuration, but you can
disable/enable the various pre-defined filters of the included default.filter
file with the web-based actions file editor.

-------------------------------------------------------------------------------

3.11. How can I set up Privoxy to act as a proxy for my LAN?

By default, Privoxy only responds to requests from 127.0.0.1 (localhost). To
have it act as a server for a network, this needs to be changed in the main
configuration file. Look for the listen-address option, which may be commented
out with a "#" symbol. Make sure it is uncommented, and assign it the address
of the LAN gateway interface, and port number to use. Assuming your LAN address
is 192.168.1.1 and you wish to run Privoxy on port 8118, this line should look
like:

  listen-address  192.168.1.1:8118                                             

Save the file, and restart Privoxy. Configure all browsers on the network then
to use this address and port number.

Alternately, you can have Privoxy listen on all available interfaces:

  listen-address    :8118                                                      

And then use Privoxy's permit-access feature to limit connections. A firewall
in this situation is recommended as well.

The above steps should be the same for any TCP network, regardless of operating
system.

If you run Privoxy on a LAN with untrusted users, we recommend that you
double-check the access control and security options!

-------------------------------------------------------------------------------

3.12. Instead of ads, now I get a checkerboard pattern. I don't want to see
anything.

The replacement for blocked images can be controlled with the set-image-blocker
action. You have the choice of a checkerboard pattern, a transparent 1x1 GIF
image (aka "blank"), or a redirect to a custom image of your choice. Note that
this choice only has effect for images which are blocked as images, i.e. whose
URLs match both a handle-as-image and block action.

If you want to see nothing, then change the set-image-blocker action to
"blank". This can be done by editing the default.action file, or trough the 
web-based actions file editor.

-------------------------------------------------------------------------------

3.13. Why would anybody want to see a checkerboard pattern?

Remember that telling which image is an ad and which isn't, is mostly
guesswork. While we hope that the standard configuration is rather smart, it
can and will make errors. The checkerboard image is visually decent, but it
shows you that and where images were blocked, which can be very helpful in case
some navigation aid or otherwise innocent image was erroneously blocked. Some
people might also enjoy seeing how many banners they don't have to see..

-------------------------------------------------------------------------------

3.14. I see some images being replaced by a text instead of the checkerboard
image. Why and how do I get rid of this?

This happens when the banners are not embedded in the HTML code of the page
itself, but in separate HTML (sub)documents that are loaded into (i)frames or
(i)layers, and these external HTML documents are blocked. Being non-images they
get replaced by a substitute HTML page rather than a substitute image, which
wouldn't work out technically, since the browser expects and accepts only HTML
when it has requested an HTML document.

The substitute page adapts to the available space and shows itself as a
miniature two-liner if loaded into small frames, or full-blown with a large red
"BLOCKED" banner if space allows.

If you prefer the banners to be blocked by images, you must see to it that the
HTML documents in which they are embedded are not blocked. Clicking the "See
why" link offered in the substitute page will show you which rule blocked the
page. After changing the rule and un-blocking the HTML documents, the browser
will try to load the actual banner images and the usual image blocking will
(hopefully!) kick in.

-------------------------------------------------------------------------------

3.15. Can Privoxy run as a service on Win2K/NT/XP?

Yes. Version 3.0.5 introduces full Windows service functionality. See the User
Manual for details on how to install and configure Privoxy as a service.

Earlier 3.x versions could run as a system service using srvany.exe. See the
discussion at http://sourceforge.net/tracker/?func=detail&atid=361118&aid=
485617&group_id=11118, for details, and a sample configuration.

-------------------------------------------------------------------------------

3.16. How can I make Privoxy work with other proxies like Squid or Tor?

This can be done and is often useful to combine the benefits of Privoxy with
those of a another proxy. See the forwarding chapter in the User Manual which
describes how to do this, and the How do I use Privoxy together with Tor
section below.

-------------------------------------------------------------------------------

3.17. Can I just set Privoxy to use port 80 and thus avoid individual browser
configuration?

No, its more complicated than that. This only works with special kinds of
proxies known as "transparent" proxies (see below).

-------------------------------------------------------------------------------

3.18. Can Privoxy run as a "transparent" proxy?

No, Privoxy currently does not have this ability, though it may be added in a
future release. Transparent proxies require special handling of the request
headers beyond what Privoxy is now capable of.

Chaining Privoxy behind another proxy that has this ability should work though.
See the forwarding chapter in the User Manual. As a transparent proxy to be
used for chaining we recommend Transproxy (http://transproxy.sourceforge.net/).

-------------------------------------------------------------------------------

3.19. How can I configure Privoxy for use with Outlook Express?

Outlook Express uses Internet Explorer components to both render HTML, and
fetch any HTTP requests that may be embedded in an HTML email. So however you
have Privoxy configured to work with IE, this configuration should
automatically be shared.

-------------------------------------------------------------------------------

3.20. How can I have separate rules just for HTML mail?

The short answer is, you can't. Privoxy has no way of knowing which particular
application makes a request, so there is no way to distinguish between web
pages and HTML mail. Privoxy just blindly proxies all requests. In the case of
Outlook Express (see above), OE uses IE anyway, and there is no way for Privoxy
to ever be able to distinguish between them (nor could any other proxy type
application for that matter).

For a good discussion of some of the issues involved (including privacy and
security issues), see http://sourceforge.net/tracker/?func=detail&atid=211118&
aid=629518&group_id=11118.

-------------------------------------------------------------------------------

3.21. I sometimes notice cookies sneaking through. How?

Cookies can be set in several ways. The classic method is via the Set-Cookie
HTTP header. This is straightforward, and an easy one to manipulate, such as
the Privoxy concept of session-cookies-only. There is also the possibility of
using Javascript to set cookies (Privoxy calls these content-cookies). This is
trickier because the syntax can vary widely, and thus requires a certain amount
of guesswork. It is not realistic to catch all of these short of disabling
Javascript, which would break many sites. And lastly, if the cookies are
embedded in a HTTPS/SSL secure session via Javascript, they are beyond
Privoxy's reach.

All in all, Privoxy can help manage cookies in general, can help minimize the
loss of privacy posed by cookies, but can't realistically stop all cookies.

-------------------------------------------------------------------------------

3.22. Are all cookies bad? Why?

No, in fact there are many beneficial uses of cookies. Cookies are just a
method that browsers can use to store data between pages, or between browser
sessions. Sometimes there is a good reason for this, and the user's life is a
bit easier as a result. But there is a long history of some websites taking
advantage of this layer of trust, and using the data they glean from you and
your browsing habits for their own purposes, and maybe to your potential
detriment. Such sites are using you and storing their data on your system. That
is why the security conscious watch from whom those cookies come, and why they
really need to be there.

See the Wikipedia cookie definition for more.

-------------------------------------------------------------------------------

3.23. How can I allow permanent cookies for my trusted sites?

There are several actions that relate to cookies. The default behavior is to
allow only "session cookies", which means the cookies only last for the current
browser session. This eliminates most kinds of abuse related to cookies. But
there may be cases where we want cookies to last.

To disable all cookie actions, so that cookies are allowed unrestricted, both
in and out, for example.com:

 { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} } 
  .example.com                                                                                        

Place the above in user.action. Note some of these may be off by default
anyway, so this might be redundant, but there is no harm being explicit in what
you want to happen. user.action includes an alias for this situation, called
allow-all-cookies.

-------------------------------------------------------------------------------

3.24. Can I have separate configurations for different users?

Each instance of Privoxy has its own configuration, including such attributes
as the TCP port that it listens on. What you can do is run multiple instances
of Privoxy, each with a unique listen-address and configuration path, and then
each of these can have their own configurations. Think of it as per-port
configuration.

Simple enough for a few users, but for large installations, consider having
groups of users that might share like configurations.

-------------------------------------------------------------------------------

3.25. Can I set-up Privoxy as a whitelist of "good" sites?

Sure. There are a couple of things you can do for simple whitelisting. Here's
one real easy one:

 ############################################################                  
 # Blacklist                                                                   
 ############################################################                  
 { +block }                                                                    
 / # Block *all* URLs                                                          
                                                                               
 ############################################################                  
 # Whitelist                                                                   
 ############################################################                  
 { -block }                                                                    
  kids.example.com                                                             
  toys.example.com                                                             
  games.example.com                                                            

This allows access to only those three sites.

A more interesting approach is Privoxy's trustfile concept, which incorporates
the notion of "trusted referrers". See the User Manual Trust documentation.

These are fairly simple approaches and are not completely foolproof. There are
various other configuration options that should be disabled (described
elsewhere here and in the User Manual) so that users can't modify their own
configuration and easily circumvent the whitelist.

-------------------------------------------------------------------------------

4. Miscellaneous

4.1. How much does Privoxy slow my browsing down? This has to add extra time to
browsing.

How much of an impact depends on many things, including the CPU of the host
system, how aggressive the configuration is, which specific actions are being
triggered, the size of the page, etc.

Overall, it should not slow you down any in real terms, and may actually help
speed things up since ads, banners and other junk are not typically being
retrieved and displayed. The actual processing time required by Privoxy itself
for each page, is relatively small in the overall scheme of things, and happens
very quickly. This is typically more than offset by time saved not downloading
and rendering ad images (if ad blocking is being used).

"Filtering" content via the filter or deanimate-gifs actions will certainly
cause a perceived slowdown, since the entire document needs to be buffered
before displaying. And on very large documents, there may be some impact. How
much depends on the page size, the actual definition of the filter(s), etc. See
below. Most other actions have little to no impact on speed.

-------------------------------------------------------------------------------

4.2. I notice considerable delays in page requests compared to the old
Junkbuster. What's wrong?

If you use any filter action, such as filtering banners by size, web-bugs etc,
or the deanimate-gifs action, the entire document must be loaded into memory in
order for the filtering mechanism to work, and nothing is sent to the browser
during this time.

The loading time typically does not really change much in real numbers, but the
feeling is different, because most browsers are able to start rendering
incomplete content, giving the user a feeling of "it works". This effect is
more noticeable on slower dialup connections. Extremely large documents may
have some impact on the time to load the page where there is filtering being
done. But overall, the difference should be very minimal. If there is a big
impact, then probably some other problem is contributing.

Filtering is automatically disabled for inappropriate MIME types. But note that
if the web server mis-reports the MIME type, then content that should not be
filtered, could be. Privoxy only knows how to differentiate filterable content
because of the MIME type as reported by the server, or because of some
configuration setting that enables/disables filtering. 

-------------------------------------------------------------------------------

4.3. What are "http://config.privoxy.org/" and "http://p.p/"?

http://config.privoxy.org/ is the address of Privoxy's built-in user interface,
and http://p.p/ is a shortcut for it.

Since Privoxy sits between your web browser and the Internet, it can simply
intercept requests for these addresses and answer them with its built-in "web
server".

This also makes for a good test for your browser configuration: If entering the
URL http://config.privoxy.org/ takes you to a page saying "This is Privoxy
...", everything is OK. If you get a page saying "Privoxy is not working"
instead, then your browser didn't use Privoxy for the request, hence it could
not be intercepted, and you have accessed the real web site at
config.privoxy.org.

With recent versions of Privoxy (version 2.9.x and later), the user interface
features information on the run time status, the configuration, and even a
built-in editor for the actions files.

Note that the built-in URLs from earlier versions of Junkbuster / Privoxy,
http://example.com/show-proxy-args and http://i.j.b/, are no longer supported.
If you still use such an old version, you should really consider upgrading to
3.0.5.

-------------------------------------------------------------------------------

4.4. How can I submit new ads, or report problems?

Please see the Contact section for various ways to interact with the
developers.

-------------------------------------------------------------------------------

4.5. Why doesn't anyone answer my support request?

Rest assured that it has been read and considered. Why it is not answered,
could be for various reasons, including no one has a good answer for it, no one
has had time to yet investigate it thoroughly, it has been reported numerous
times already, or because not enough information was provided to help us help
you. Your efforts are not wasted, and we do appreciate them.

-------------------------------------------------------------------------------

4.6. How can I hide my IP address?

If you run both the browser and the proxy locally, you cannot hide your IP
address with Privoxy or ultimately any other software. The server needs to know
your IP address so that it knows where to send the responses back.

There are many publicly usable "anonymous" proxies out there, which provide a
further level of indirection between you and the web server.

However, these proxies are called "anonymous" because you don't need a
password, not because they would offer any real anonymity. Most of them will
log your IP address and make it available to the authorities in case you
violate the law of the country they run in. In fact you can't even rule out
that some of them only exist to *collect* information on (those suspicious)
people with a more than average preference for privacy.

Your best bet is to chain Privoxy with Tor, an EFF supported onion routing
system. The configuration details can be found in How do I use Privoxy together
with Tor section just below.

-------------------------------------------------------------------------------

4.7. Can Privoxy guarantee I am anonymous?

No. Your chances of remaining anonymous are greatly improved, but unless you 
chain Privoxy with Tor or a similar system and know what you're doing when it
comes to configuring the rest of your system, it would be safest to assume that
everything you do on the Web can be traced back to you.

Privoxy can remove various information about you, and allows you more freedom
to decide which sites you can trust, and what details you want to reveal. But
it neither hides your ip address, nor can it guarantee that the rest of the
system behaves correctly. There are several possibilities how a web sites can
find out who you are, even if you are using a strict Privoxy configuration and
chained it with Tor.

Most of Privoxy's protection can be easily subverted by an insecure browser
configuration, therefore you should use a browser that can be configured to
only execute code from trusted sites, and be careful which sites you trust. For
example there is no point in having Privoxy modify the User-Agent header, if
websites can get all the information they want through JavaScript, ActiveX,
Flash, Java etc.

A few browsers disclose the user's email address in certain situations, such as
when transferring a file by FTP. Privoxy does not filter FTP. If you need this
feature, or are concerned about the mail handler of your browser disclosing
your email address, you might consider products such as NSClean.

Browsers available only as binaries could use non-standard headers to give out
any information they can have access to: see the manufacturer's license
agreement. It's impossible to anticipate and prevent every breach of privacy
that might occur. The professionally paranoid prefer browsers available as
source code, because anticipating their behavior is easier. Trust the source,
Luke!

-------------------------------------------------------------------------------

4.8. A test site says I am not using a Proxy.

Good! Actually, they are probably testing for some other kinds of proxies.
Hiding yourself completely would require additional steps.

-------------------------------------------------------------------------------

4.9. How do I use Privoxy together with Tor?

Before you configure Privoxy to use Tor (http://tor.eff.org/), please follow
the User Manual chapters 2. Installation and 5. Startup to make sure Privoxy
itself is setup correctly.

If it is, refer to Tor's extensive documentation to learn how to install Tor,
and make sure Tor's logfile says that "Tor has successfully opened a circuit"
and it "looks like client functionality is working".

If either Tor or Privoxy isn't working, their combination most likely will
neither. Testing them on their own will also help you to direct problem reports
to the right audience. If Privoxy isn't working, don't bother the Tor
developers. If Tor isn't working, don't send bug reports to the Privoxy Team.

If you verified that Privoxy and Tor are working, it is time to connect them.
As far as Privoxy is concerned, Tor is just another proxy that can be reached
by socks4 or socks4a. Most likely you are interested in Tor to increase your
anonymity level, therefore you should use socks4a, to make sure Privoxy's DNS
requests are done through Tor and thus invisible to your local network.

Since Privoxy 3.0.5, its configuration (section 5.2) is already prepared for
Tor, if you are using a default Tor configuration and run it on the same system
as Privoxy, you just have to uncomment the line:

#        forward-socks4a             /     127.0.0.1:9050 .                    
                                                                               

This is enough to reach the Internet, but additionally you should uncomment the
following forward rules, to make sure your local network is still reachable
through Privoxy:

#        forward         192.168.*.*/     .                                    
#        forward            10.*.*.*/     .                                    
#        forward           127.*.*.*/     .                                    
                                                                               

Unencrypted connections to systems in these address ranges will be as (un)
secure as the local network is, but the alternative is that you can't reach the
network at all. If you also want to be able to reach servers in your local
network by using their names, you will need additional exceptions that look
like this:

#        forward           localhost/     .                                    
                                                                               

Save the modified configuration file and open http://config.privoxy.org/
show-status/ in your browser, confirm that Privoxy has reloaded its
configuration and that there are no other forward lines, unless you know that
you need them. I everything looks good, refer to Tor Faq 4.2 to learn how to
verify that you are really using Tor.

Afterward, please take the time to at least skim through the rest of Tor's
documentation. Make sure you understand what Tor does, why it is no replacement
for application level security, and why you shouldn't use it for unencrypted
logins.

-------------------------------------------------------------------------------

4.10. Might some things break because header information or content is being
altered?

Definitely. More and more sites use HTTP header content to decide what to
display and how to display it. There is many ways that this can be handled, so
having hard and fast rules, is tricky.

"User-Agent" in particular is often used in this way to identify the browser,
and adjust content accordingly. Changing this now (at least not further than
removing the OS information) is not recommended, since so many sites do look
for it. You may get undesirable results by changing this.

For instance, different browsers use different encodings of Russian and Czech
characters, certain web servers convert pages on-the-fly according to the User
Agent header. Giving a "User Agent" with the wrong operating system or browser
manufacturer causes some sites in these languages to be garbled; Surfers to
Eastern European sites should change it to something closer. And then some page
access counters work by looking at the "Referer" header; they may fail or break
if unavailable. The weather maps of Intellicast have been blocked by their
server when no "Referer" or cookie is provided, is another example. (But you
can forge both headers without giving information away). There are many other
ways things can go wrong when trying to fool a web server.

Similar thoughts apply to modifying JavaScript, and, to a lesser degree, HTML
elements.

If you have problems with a site, you will have to adjust your configuration
accordingly. Cookies are probably the most likely adjustment that may be
required, but by no means the only one.

-------------------------------------------------------------------------------

4.11. Can Privoxy act as a "caching" proxy to speed up web browsing?

No, it does not have this ability at all. You want something like Squid for
this. And, yes, before you ask, Privoxy can co-exist with other kinds of
proxies like Squid. See the forwarding chapter in the user manual for details.

-------------------------------------------------------------------------------

4.12. What about as a firewall? Can Privoxy protect me?

Not in the way you mean, or in the way a true firewall can. Privoxy can help
protect your privacy, but not protect you from intrusion attempts. It is, of
course, perfectly possible and recommended to use both.

-------------------------------------------------------------------------------

4.13. I have large empty spaces / a checkerboard pattern now where ads used to
be. Why?

It would be technically possible eliminate the banners in a way that frees
their screen estate in many cases, by doing all banner blocking with filters,
i.e. eliminating the whole image references from the HTML pages instead of
letting them stay in, and blocking the resulting requests for the banners
themselves.

But this would consume considerable CPU resources, would likely destroy the
layout of many web pages which rely on the banners consuming a certain amount
of screen space, and would fail in other cases, where the screen space is
reserved e.g. by tables anyway. Also, making the banners disappear without a
visual trace complicates troubleshooting.

So we won't support this in the default configuration, but you can of course
define appropriate filters yourself.

-------------------------------------------------------------------------------

4.14. How can Privoxy filter Secure (HTTPS) URLs?

Since secure HTTP connections are encrypted SSL sessions between your browser
and the secure site, and are meant to be reliably secure, there is little that
Privoxy can do but hand the raw gibberish data though from one end to the other
unprocessed.

The only exception to this is blocking by host patterns, as the client needs to
tell Privoxy the name of the remote server, so that Privoxy can establish the
connection. If that name matches a host-only pattern, the connection will be
blocked.

As far as ad blocking is concerned, this is less of a restriction than it may
seem, since ad sources are often identifiable by the host name, and often the
banners to be placed in an encrypted page come unencrypted nonetheless for
efficiency reasons, which exposes them to the full power of Privoxy's ad
blocking.

"Content cookies" (those that are embedded in the actual HTML or JS page
content, see filter{content-cookies}), in an SSL transaction will be impossible
to block under these conditions. Fortunately, this does not seem to be a very
common scenario since most cookies come by traditional means.

-------------------------------------------------------------------------------

4.15. Privoxy runs as a "server". How secure is it? Do I need to take any
special precautions?

There are no known exploits that might affect Privoxy. On Unix-like systems,
Privoxy can run as a non-privileged user, which is how we recommend it be run.
Also, by default Privoxy only listens to requests from "localhost" only. The
server aspect of Privoxy is not itself directly exposed to the Internet in this
configuration. If you want to have Privoxy serve as a LAN proxy, this will have
to be opened up to allow for LAN requests. In this case, we'd recommend you
specify only the LAN gateway address, e.g. 192.168.1.1, in the main Privoxy
configuration file and check all access control and security options. All LAN
hosts can then use this as their proxy address in the browser proxy
configuration, but Privoxy will not listen on any external interfaces. ACLs can
be defined in addition, and using a firewall is always good too. Better safe
than sorry.

-------------------------------------------------------------------------------

4.16. How can I temporarily disable Privoxy?

The easiest way is to access Privoxy with your browser by using the remote
toggle URL: http://config.privoxy.org/toggle. See the Bookmarklets section of
the User Manual for an easy way to access this feature.

-------------------------------------------------------------------------------

4.17. When "disabled" is Privoxy totally out of the picture?

No, this just means all filtering and actions are disabled. Privoxy is still
acting as a proxy, but just not doing any of the things that Privoxy would
normally be expected to do. It is still a "middle-man" in the interaction
between your browser and web sites.

-------------------------------------------------------------------------------

4.18. My logs show Privoxy "crunches" ads, but also its own internal CGI pages.
What is a "crunch"?

A "crunch" simply means Privoxy intercepted something, nothing more. Often this
is indeed ads or banners, but Privoxy uses the same mechanism for trapping
requests for its own internal pages. For instance, a request for Privoxy's
configuration page at: http://config.privoxy.org, is intercepted (i.e. it does
not go out to the 'net), and the familiar CGI configuration is returned to the
browser, and the log consequently will show a "crunch".

-------------------------------------------------------------------------------

4.19. Can Privoxy effect files that I download from a webserver? FTP server?

From the webserver's perspective, there is no difference between viewing a
document (i.e. a page), and downloading a file. The same is true of Privoxy. If
there is a match for a block pattern, it will still be blocked, and of course
this is obvious.

Filtering is potentially more of a concern since the results are not always so
obvious, and the effects of filtering are there whether the file is simply
viewed, or downloaded. And potentially whether the content is some obnoxious
advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course, one
of these presumably is "bad" content that we don't want, and the other is
"good" content that we do want. Privoxy is blind to the differences, and can
only distinguish "good from bad" by the configuration parameters we give it.

Privoxy knows the differences in files according to the "Document Type" as
reported by the webserver. If this is reported accurately (e.g. "application/
zip" for a zip archive), then Privoxy knows to ignore these where appropriate.
Privoxy potentially can filter HTML as well as plain text documents, subject to
configuration parameters of course. Also, documents that are of an unknown type
(generally assumed to be "text/plain") can be filtered, as will those that
might be incorrectly reported by the webserver. If such a file is a downloaded
file that is intended to be saved to disk, then any content that might have
been altered by filtering, will be saved too, for these (probably rare) cases.

Note that versions later than 3.0.2 do NOT filter document types reported as
"text/plain". Prior to this, Privoxy did filter this document type.

In short, filtering is "ON" if a) the Document Type as reported by the
webserver is appropriate and b) the configuration allows it (or at least does
not disallow it). That's it. There is no magic cookie anywhere to say this is
"good" and this is "bad". It's the configuration that let's it all happen or
not.

If you download text files, you probably do not want these to be filtered,
particularly if the content is source code, or other critical content. Source
code sometimes might be mistaken for Javascript (i.e. the kind that might open
a pop-up window). It is recommended to turn off filtering for download sites
(particularly if the content may be plain text files and you are using version
3.0.2 or earlier) in your user.action file. And also, for any site or page
where making any changes at all to the content is to be avoided.

Privoxy does not do FTP at all, only HTTP and HTTPS (SSL) protocols, so please
don't try.

-------------------------------------------------------------------------------

4.20. I just downloaded a Perl script, and Privoxy altered it! Yikes, what is
wrong!

Please read above.

-------------------------------------------------------------------------------

4.21. Should I continue to use a "HOSTS" file for ad-blocking?

One time-tested technique to defeat common ads is to trick the local DNS system
by giving a phony IP address for the ad generator in the local HOSTS file,
typically using 127.0.0.1, aka localhost. This effectively blocks the ad.

There is no reason to use this technique in conjunction with Privoxy. Privoxy
does essentially the same thing, much more elegantly and with much more
flexibility. A large HOSTS file, in fact, not only duplicates effort, but may
get in the way. It is recommended to remove such entries from your HOSTS file.
If you think your hosts list is neglected by Privoxy's configuration, consider
adding your list to your user.action file:

  { +block }                                                                   
   www.ad.example1.com                                                         
   ad.example2.com                                                             
   ads.galore.example.com                                                      
   etc.example.com                                                             

-------------------------------------------------------------------------------

4.22. Where can I find more information about Privoxy and related issues?

Other references and sites of interest to Privoxy users:

http://www.privoxy.org/, the Privoxy Home page.

http://www.privoxy.org/faq/, the Privoxy FAQ.

http://sourceforge.net/projects/ijbswa/, the Project Page for Privoxy on       
SourceForge.                                                                   

http://config.privoxy.org/, the web-based user interface. Privoxy must be      
running for this to work. Shortcut: http://p.p/                                

http://sourceforge.net/tracker/?group_id=11118&atid=460288, to submit "misses" 
and other configuration related suggestions to the developers.                 

http://www.junkbusters.com/ht/en/cookies.html, an explanation how cookies are  
used to track web users.                                                       

http://www.junkbusters.com/ijb.html, the original Internet Junkbuster.

http://privacy.net/, a useful site to check what information about you is      
leaked while you browse the web.                                               

http://www.squid-cache.org/, a very popular caching proxy, which is often used 
together with Privoxy.                                                         

http://tor.eff.org/, Tor can help anonymize web browsing, web publishing,      
instant messaging, IRC, SSH, and other applications.                           

http://www.privoxy.org/developer-manual/, the Privoxy developer manual.

-------------------------------------------------------------------------------

4.23. I've noticed that Privoxy changes "Microsoft" to "MicroSuck"! Why are you
manipulating my browsing?

We're not. The text substitutions that you are seeing are disabled in the
default configuration as shipped. You have either manually activated the "fun"
filter which is clearly labeled "Text replacements for subversive browsing fun!
" or you are using an older Privoxy version and have implicitly activated it by
choosing the "Adventuresome" profile in the web-based editor. Please upgrade!

-------------------------------------------------------------------------------

5. Troubleshooting

5.1. I am getting "connection refused" with every web page?

Either Privoxy is not running, or your browser is configured for a different
port than what Privoxy is using, or, if using a forwarding rule, you have a
configuration problem or a problem with a host in the forwarding chain.

You should verify that Privoxy is indeed running and that the correct port is
set, and matches what your browser is set to. See listen-address option in
Privoxy's main configuration file. If using any forwarding rules, disable those
to make sure the problem is not with a forwarder.

-------------------------------------------------------------------------------

5.2. I just added a new rule, but the steenkin ad is still getting through.
How?

If the ad had been displayed before you added its URL, it will probably be held
in the browser's cache for some time, so it will be displayed without the need
for any request to the server, and Privoxy will not be in the picture. The best
thing to do is try flushing the browser's caches. And then try again.

If this doesn't help, you probably have an error in the rule you applied. Try
pasting the full URL of the offending ad into http://config.privoxy.org/
show-url-info and see if it really matches your new rule. Blocking ads is like
blocking spam: a lot of tinkering is required to stay ahead of the game.

-------------------------------------------------------------------------------

5.3. One of my favorite sites does not work with Privoxy. What can I do?

First verify that it is indeed a Privoxy problem, by toggling off Privoxy
through http://config.privoxy.org/toggle, and then shift-reloading the problem
page (i.e. holding down the shift key while clicking reload. Alternatively,
flush your browser's disk and memory caches).

If still a problem, go to http://config.privoxy.org/show-url-info and paste the
full URL of the page in question into the prompt. See which actions are being
applied to the URL, and which matches in which actions files are responsible
for that. Now, armed with this information, go to http://config.privoxy.org/
show-status and select the appropriate actions files for editing.

You can now either look for a section which disables the actions that you
suspect to cause the problem and add a pattern for your site there, or make up
a completely new section for your site. In any case, the recommended way is to
disable only the prime suspect, reload the problem page, and only if the
problem persists, disable more and more actions until you have identified the
culprit. You may or may not want to turn the other actions on again. Remember
to flush your browser's caches in between any such changes!

Alternately, if you are comfortable with a text editor, you can accomplish the
same thing by editing the appropriate actions file. Probably the easiest way to
deal with such problems when editing by hand is to add your site to a { fragile
} section in user.action, which is an alias that turns off most "dangerous"
actions, but is also likely to turn off more actions then needed, and thus
lower your privacy and protection more than necessary,

Troubleshooting actions is discussed in more detail in the User Manual
appendix, Troubleshooting: the Anatomy of an Action. There is also an actions
tutorial with general configuration information and examples.

-------------------------------------------------------------------------------

5.4. After installing Privoxy, I have to log in every time I start IE. What
gives?

This is a quirk that effects the installation of Privoxy, in conjunction with
Internet Explorer and Internet Connection Sharing on Windows 2000 and Windows
XP. The symptoms may appear to be corrupted or invalid DUN settings, or
passwords.

When setting up an NT based Windows system with Privoxy you may find that
things do not seem to be doing what you expect. When you set your system up you
will probably have set up Internet Connection Sharing (ICS) with Dial up
Networking (DUN) when logged in with administrator privileges. You will
probably have made this DUN connection available to other accounts that you may
have set-up on your system. E.g. Mum or Dad sets up the system and makes
accounts suitably configured for the kids.

When setting up Privoxy in this environment you will have to alter the proxy
set-up of Internet Explorer (IE) for the specific DUN connection on which you
wish to use Privoxy. When you do this the ICS DUN set-up becomes user specific.
In this instance you will see no difference if you change the DUN connection
under the account used to set-up the connection. However when you do this from
another user you will notice that the DUN connection changes to make available
to "Me only". You will also find that you have to store the password under each
different user!

The reason for this is that each user's set-up for IE is user specific. Each
set-up DUN connection and each LAN connection in IE store the settings for each
user individually. As such this enforces individual configurations rather than
common ones. Hence the first time you use a DUN connection after re-booting
your system it may not perform as you expect, and prompt you for the password.
Just set and save the password again and all should be OK.

[Thanks to Ray Griffith for this submission.]

-------------------------------------------------------------------------------

5.5. I cannot connect to any FTP sites. Privoxy is blocking me.

Privoxy cannot act as a proxy for FTP traffic, so do not configure your browser
to use Privoxy as an FTP proxy. The same is true for any protocol other than
HTTP or HTTPS (SSL).

Most browsers understand FTP as well as HTTP. If you connect to a site, with a
URL like ftp://ftp.example.com, your browser is making an FTP connection, and
not a HTTP connection. So while your browser may speak FTP, Privoxy does not,
and cannot proxy such traffic.

To complicate matters, some systems may have a generic "proxy" setting, which
will silently enable various protocols, including both HTTP and FTP proxying!
So it is possible to accidentally enable FTP proxying in these cases. And of
course, if this happens, Privoxy will indeed cause problems since it does not
know FTP. Newer version will give a sane error message if a FTP connection is
attempted. Just disable the FTP setting and all will be well again.

Will Privoxy ever proxy FTP traffic? Unlikely. There just is not much reason,
and the work to make this happen is more than it may seem.

-------------------------------------------------------------------------------

5.6. In Mac OSX, I can't configure Microsoft Internet Explorer to use Privoxy
as the HTTP proxy.

Microsoft Internet Explorer (in versions like 5.1) respects system-wide network
settings. In order to change the HTTP proxy, open System Preferences, and click
on the Network icon. In the settings pane that comes up, click on the Proxies
tab. Ensure the "Web Proxy (HTTP)" checkbox is checked and enter 127.0.0.1 in
the entry field. Enter 8118 in the Port field. The next time you start IE, it
should reflect these values.

-------------------------------------------------------------------------------

5.7. In Mac OSX, I dragged the Privoxy folder to the trash in order to
uninstall it. Now the finder tells me I don't have sufficient privileges to
empty the trash.

Just dragging the Privoxy folder to the trash is not enough to delete it.
Privoxy supplies an uninstall.command file that takes care of these details.
Open the trash, drag the uninstall.command file out of the trash and
double-click on it. You will be prompted for confirmation and the
administration password.

The trash may still appear full after this command; emptying the trash from the
desktop should make it appear empty again.

-------------------------------------------------------------------------------

5.8. In Mac OSX Panther (10.3), images often fail to load and/or I experience
random delays in page loading. I'm using localhost as my browser's proxy
setting.

We believe this is due to an IPv6-related bug in OSX, but don't fully
understand the issue yet. In any case, changing the proxy setting to 127.0.0.1
instead of localhost works around the problem.

-------------------------------------------------------------------------------

5.9. I get a completely blank page at one site. "View Source" shows only:
<html><body></body></html>. Without Privoxy the page loads fine.

Chances are that the site suffers from a bug in PHP, which results in empty
pages being sent if the client explicitly requests an uncompressed page, like
Privoxy does. This bug has been fixed in PHP 4.2.3.

To find out if this is in fact the source of the problem, try adding the site
to a -prevent-compression section in user.action:

   # Make exceptions for ill-behaved sites:                                      
   #                                                                             
   {-prevent-compression}                                                        
    .example.com                                                                 

If that works, you may also want to report the problem to the site's
webmasters, telling them to use zlib.output_compression instead of ob_gzhandler
in their PHP applications (workaround) or upgrade to PHP 4.2.3 or later (fix).

-------------------------------------------------------------------------------

5.10. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?

More than likely this is a problem with your TCP/IP networking. ZoneAlarm has
been reported to cause this symptom -- even if not running. The solution is to
either fight the ZA configuration, or uninstall ZoneAlarm, and then find
something better behaved in its place. Other personal firewall type products
may cause similar type problems if not configured correctly.

-------------------------------------------------------------------------------

5.11. My logs show many "Unable to get my own hostname" lines. Why?

Privoxy tries to get the hostname of the system its running on from the IP
address of the system interface it is bound to (from the config file
listen-address setting). If the system cannot supply this information, Privoxy
logs this condition.

Typically, this would be considered a minor system configuration error. It is
not a fatal error to Privoxy however, but may result in a much slower response
from Privoxy on some platforms due to DNS timeouts.

This can be caused by a problem with the local HOSTS file. If this file has
been changed from the original, try reverting it to see if that helps.

-------------------------------------------------------------------------------

5.12. When I try to launch Privoxy, I get an error message "port 8118 is
already in use" (or similar wording). Why?

Port 8118 is Privoxy's default TCP "listening" port. Typically this message
would mean that there is already one instance of Privoxy running, and you are
actually trying to start a second Privoxy on the same port, which will not
work. (You can have multiple instances but they must be assigned different
ports.) How and why this might happen varies from platform to platform, but you
need to check your installation and start-up procedures.

-------------------------------------------------------------------------------

5.13. Pages with UTF-8 fonts are garbled.

This is caused by the "demoronizer" filter. You should either upgrade Privoxy,
or at least upgrade to the most recent default.action file available from 
SourceForge. Or you can simply disable the demoronizer filter.

-------------------------------------------------------------------------------

5.14. Why are binary files (such as images) corrupted when Privoxy is used?

This may also be caused by the "demoronizer" filter, in conjunction with a web
server that is misreporting a file type. Binary files are exempted from
Privoxy's filtering (unless the web server by mistake says the file is
something else). Either upgrade Privoxy, or go to the most recent
default.action file available from SourceForge.

-------------------------------------------------------------------------------

5.15. What is the "demoronizer" and why is it there?

The original demoronizer was a Perl script that cleaned up HTML pages which
were created with certain Microsoft products. MS has used proprietary
extensions to standardized font encodings (ISO 8859-1), which has caused
problems for pages that are viewed with non-Microsoft products (and are
expecting to see a standard set of fonts). The demoronizer corrected these
errors so the pages displayed correctly. Privoxy borrowed from this script,
introducing a filter based on the original demoronizer, which in turn could
correct these errors on the fly.

But this is only needed in some situations, and will cause serious problems in
some other situations.

If you are using Microsoft products, you do not need it. If you need to view
pages with UTF-8 characters (such as Cyrillic or Chinese), then it will cause
corruption of the fonts, and thus should not be on.

On the other hand, if you use non-Microsoft products, and you occasionally
notice wierd characters on pages, you might want to try it.

-------------------------------------------------------------------------------

5.16. Why do I keep seeing "PrivoxyWindowOpen()" in raw source code?

Privoxy is attempting to disable malicious Javascript in this case, with the
unsolicited-popups filter. Privoxy cannot tell very well "good" code snippets
from "bad" code snippets.

If you see this in HTML source, and the page displays without problems, then
this is good, and likely some pop-up window was disabled. If you see this where
it is causing a problem, such as a downloaded program source code file, then
you should set an exception for this site or page such that the integrity of
the page stays in tact by disabling all filtering.

-------------------------------------------------------------------------------

5.17. I am getting too many DNS errors like "404 No Such Domain". Why can't
Privoxy do this better?

There are potentially several factors here. First of all, the DNS resolution is
done by the underlying operating system -- not Privoxy itself. Privoxy merely
initiates the process and hands it off, and then later reports whatever the
outcome was. And tries to give a coherent message if there seems to be a
problem. In some cases, this might otherwise be mitigated by the browser itself
which might try some work-arounds and alternate approaches (e.g adding "www."
to the URL). In other cases, if Privoxy is being chained with another proxy,
this could complicate the issue, and cause undue delays and timeouts. In the
case of a "socks4a" proxy, the socks server handles all the DNS. Privoxy would
just be the "messenger" which is reporting whatever problem occurred
downstream, and not the root cause of the error.

In any case, v. 3.0.5 includes various improvements to help Privoxy better
handle these cases.

-------------------------------------------------------------------------------

5.18. At one site Privoxy just hangs, and starts taking all CPU. Why is this?

This is probably a manifestation of the "100% cpu" problem that occurs on pages
containing many (thousands upon thousands) of blank lines. The blank lines are
in the raw HTML source of the page, and the browser just ignores them. But the
pattern matching in Privoxy's page filtering mechanism is trying to match
against absurdly long strings and this becomes very CPU-intensive, taking a
long, long time to complete. Until a better solution comes along, disable
filtering on these pages, particularly the js-annoyances and unsolicited-popups
filters.

-------------------------------------------------------------------------------

5.19. I just installed Privoxy, and all my browsing has slowed to a crawl. What
gives?

This should not happen, and for the overwhelming number of users world-wide, it
does not happen. I would suspect some inadvertent interaction of software
components such as anti-virus software, spyware protectors, personal firewalls
or similar components. Try disabling (or uninstalling) these one at a time and
see if that helps.

-------------------------------------------------------------------------------

6. Contacting the developers, Bug Reporting and Feature Requests

We value your feedback. In fact, we rely on it to improve Privoxy and its
configuration. However, please note the following hints, so we can provide you
with the best support:

-------------------------------------------------------------------------------

6.1. Get Support

For casual users, our support forum at SourceForge is probably best suited: 
http://sourceforge.net/tracker/?group_id=11118&atid=211118

All users are of course welcome to discuss their issues on the users mailing
list, where the developers also hang around.

-------------------------------------------------------------------------------

6.2. Reporting Problems

"Problems" for our purposes, come in two forms:

  * Configuration issues, such as ads that slip through, or sites that don't
    function properly due to one Privoxy "action" or another being turned "on".
   
  * "Bugs" in the programming code that makes up Privoxy, such as that might
    cause a crash.
   
-------------------------------------------------------------------------------

6.2.1. Reporting Ads or Other Configuration Problems

Please send feedback on ads that slipped through, innocent images that were
blocked, sites that don't work properly, and other configuration related
problem of default.action file, to http://sourceforge.net/tracker/?group_id=
11118&atid=460288, the Actions File Tracker.

New, improved default.action files may occasionally be made available based on
your feedback. These will be announced on the ijbswa-announce list and
available from our the files section of our project page.

-------------------------------------------------------------------------------

6.2.2. Reporting Bugs

Please report all bugs only through our bug tracker: http://sourceforge.net/
tracker/?group_id=11118&atid=111118.

Before doing so, please make sure that the bug has not already been submitted
and observe the additional hints at the top of the submit form. If already
submitted, please feel free to add any info to the original report that might
help to solve the issue.

Please try to verify that it is a Privoxy bug, and not a browser or site bug
first. If unsure, try toggling off Privoxy, and see if the problem persists. If
you are using your own custom configuration, please try the stock configs to
see if the problem is configuration related.

If not using the latest version, the bug may have been found and fixed in the
meantime. We would appreciate if you could take the time to upgrade to the
latest version (or even the latest CVS snapshot) and verify your bug.

Please be sure to provide the following information:

  * The exact Privoxy version of the proxy software (if you got the source from
    CVS, please also provide the source code revisions as shown in http://
    config.privoxy.org/show-version).
   
  * The operating system and versions you run Privoxy on, (e.g. Windows XP
    SP2), if you are using some kind of Unix flavour, sending the output of
    "uname -a" should do.
   
  * The name, platform, and version of the browser you were using (e.g.
    Internet Explorer v5.5 for Mac).
   
  * The URL where the problem occurred, or some way for us to duplicate the
    problem (e.g. http://somesite.example.com/?somethingelse=123).
   
  * Whether your version of Privoxy is one supplied by the developers of
    Privoxy via SourceForge, or somewhere else.
   
  * Whether you are using Privoxy in tandem with another proxy such as Tor. If
    so, please try disabling the other proxy.
   
  * Whether you are using a personal firewall product. If so, does Privoxy work
    without it?
   
  * Any other pertinent information to help identify the problem such as config
    or log file excerpts (yes, you should have log file entries for each action
    taken).
   
  * Please provide your SF login, or email address, in case we need to contact
    you.
   
The appendix of the Privoxy User Manual also has helpful information on
understanding actions, and action debugging.

-------------------------------------------------------------------------------

6.3. Request New Features

You are welcome to submit ideas on new features or other proposals for
improvement through our feature request tracker at http://sourceforge.net/
tracker/?atid=361118&group_id=11118.

-------------------------------------------------------------------------------

6.4. Other

For any other issues, feel free to use the mailing lists. Technically
interested users and people who wish to contribute to the project are also
welcome on the developers list! You can find an overview of all Privoxy-related
mailing lists, including list archives, at: http://sourceforge.net/mail/?
group_id=11118.

-------------------------------------------------------------------------------

7. Privoxy Copyright, License and History

Copyright  2001 - 2006 by Privoxy Developers <
ijbswa-developers@lists.sourceforge.net>

Some source code is based on code Copyright  1997 by Anonymous Coders and
Junkbusters, Inc. and licensed under the GNU General Public License.

Portions of this document are "borrowed" from the original Junkbuster (tm) FAQ,
and modified as appropriate for Privoxy.

-------------------------------------------------------------------------------

7.1. License

Privoxy is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License, version 2, as published by the Free
Software Foundation.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details, which
is available from the Free Software Foundation, Inc, 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA

You should have received a copy of the GNU General Public License along with
this program; if not, write to the

 Free Software
 Foundation, Inc. 51 Franklin Street, Fifth Floor
 Boston, MA 02110-1301
 USA 

-------------------------------------------------------------------------------

7.2. History

Along time ago, there was the Internet Junkbuster, by Anonymous Coders and 
Junkbusters Corporation. This saved many users a lot of pain in the early days
of web advertising and user tracking.

But the web, its protocols and standards, and with it, the techniques for
forcing ads on users, give up autonomy over their browsing, and for tracking
them, keeps evolving. Unfortunately, the Internet Junkbuster did not. Version
2.0.2, published in 1998, was (and is) the last official release available from
Junkbusters Corporation. Fortunately, it had been released under the GNU GPL,
which allowed further development by others.

So Stefan Waldherr started maintaining an improved version of the software, to
which eventually a number of people contributed patches. It could already
replace banners with a transparent image, and had a first version of pop-up
killing, but it was still very closely based on the original, with all its
limitations, such as the lack of HTTP/1.1 support, flexible per-site
configuration, or content modification. The last release from this effort was
version 2.0.2-10, published in 2000.

Then, some developers picked up the thread, and started turning the software
inside out, upside down, and then reassembled it, adding many new features
along the way.

The result of this is Privoxy, whose first stable version, 3.0, was released
August, 2002.

